diff --git a/src/App/Resources/translations/App.ts b/src/App/Resources/translations/App.ts index 743c969a77..c16f928f03 100644 --- a/src/App/Resources/translations/App.ts +++ b/src/App/Resources/translations/App.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed @@ -40,37 +40,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis - + Y-axis - + Z-axis - + XY-plane - + XZ-plane - + YZ-plane - + Origin diff --git a/src/App/Resources/translations/App_be.ts b/src/App/Resources/translations/App_be.ts index b251f7840f..f31189067c 100644 --- a/src/App/Resources/translations/App_be.ts +++ b/src/App/Resources/translations/App_be.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Без назвы @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis Вось X - + Y-axis Вось Y - + Z-axis Вось Z - + XY-plane Плоскасць XY - + XZ-plane Плоскасць XZ - + YZ-plane Плоскасць YZ - + Origin Пачатак каардынат diff --git a/src/App/Resources/translations/App_ca.ts b/src/App/Resources/translations/App_ca.ts index 4aee6f2562..e63c497517 100644 --- a/src/App/Resources/translations/App_ca.ts +++ b/src/App/Resources/translations/App_ca.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Sense nom @@ -43,37 +43,37 @@ L'usuari hauria de fer clic al botó Actualitza a la barra d'eines principal. App::LocalCoordinateSystem - + X-axis Eix-X - + Y-axis Eix-Y - + Z-axis Eix-Z - + XY-plane Pla-XY - + XZ-plane Pla-XZ - + YZ-plane Pla-YZ - + Origin Origen diff --git a/src/App/Resources/translations/App_cs.ts b/src/App/Resources/translations/App_cs.ts index 624ffcb051..61b257fef5 100644 --- a/src/App/Resources/translations/App_cs.ts +++ b/src/App/Resources/translations/App_cs.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Nepojmenovaný @@ -43,37 +43,37 @@ Poté by měl uživatel kliknout na tlačítko "Refresh" na hlavním panelu nás App::LocalCoordinateSystem - + X-axis osa X - + Y-axis osa Y - + Z-axis osa Z - + XY-plane rovina XY - + XZ-plane rovina XZ - + YZ-plane rovina YZ - + Origin Počátek diff --git a/src/App/Resources/translations/App_de.ts b/src/App/Resources/translations/App_de.ts index b573d4b31b..44b80dc88a 100644 --- a/src/App/Resources/translations/App_de.ts +++ b/src/App/Resources/translations/App_de.ts @@ -14,7 +14,7 @@ angewendet werden soll, die das gleiche konfigurierbare Objekt referenzieren QObject - + Unnamed Unbenannt @@ -44,37 +44,37 @@ Der Benutzer sollte dann auf die Schaltfläche Aktualisieren in der Haupt-Symbol App::LocalCoordinateSystem - + X-axis X-Achse - + Y-axis Y-Achse - + Z-axis Z-Achse - + XY-plane XY-Ebene - + XZ-plane XZ-Ebene - + YZ-plane YZ-Ebene - + Origin Ursprung diff --git a/src/App/Resources/translations/App_el.ts b/src/App/Resources/translations/App_el.ts index 7c90a5df99..8594681dc5 100644 --- a/src/App/Resources/translations/App_el.ts +++ b/src/App/Resources/translations/App_el.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Ανώνυμο(App19) @@ -44,37 +44,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis Άξονας X(App49) - + Y-axis Άξονας Υ(App54) - + Z-axis Άξονας Ζ(App59) - + XY-plane XY-Κάτοψη(App65) - + XZ-plane XZ-Πρόσοψη(App69) - + YZ-plane YZ-Πλάγια όψη(App74) - + Origin Σημείο Τομής Αξόνων diff --git a/src/App/Resources/translations/App_es-ES.ts b/src/App/Resources/translations/App_es-ES.ts index 6d70865916..053710d5ea 100644 --- a/src/App/Resources/translations/App_es-ES.ts +++ b/src/App/Resources/translations/App_es-ES.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Sin nombre @@ -44,37 +44,37 @@ El usuario deberá hacer clic en el botón de actualizar en la barra de herramie App::LocalCoordinateSystem - + X-axis Eje X - + Y-axis Eje Y - + Z-axis Eje Z - + XY-plane Plano XY - + XZ-plane Plano XZ - + YZ-plane Plano YZ - + Origin Origen de coordenadas diff --git a/src/App/Resources/translations/App_eu.ts b/src/App/Resources/translations/App_eu.ts index 3e7978102f..8be5eca47f 100644 --- a/src/App/Resources/translations/App_eu.ts +++ b/src/App/Resources/translations/App_eu.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Izenik gabea @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X-axis - + Y-axis Y-axis - + Z-axis Z-axis - + XY-plane XY-plane - + XZ-plane XZ-plane - + YZ-plane YZ-plane - + Origin Jatorria diff --git a/src/App/Resources/translations/App_fi.ts b/src/App/Resources/translations/App_fi.ts index d399458045..3758ec6315 100644 --- a/src/App/Resources/translations/App_fi.ts +++ b/src/App/Resources/translations/App_fi.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Nimetön @@ -43,37 +43,37 @@ Käyttäjän pitäisi sen jälkeen klikata Päivitä-painiketta päätyökaluriv App::LocalCoordinateSystem - + X-axis X-akseli - + Y-axis Y-akseli - + Z-axis Z-akseli - + XY-plane XY-taso - + XZ-plane XZ-taso - + YZ-plane YZ-taso - + Origin Origo diff --git a/src/App/Resources/translations/App_fr.ts b/src/App/Resources/translations/App_fr.ts index 2d16d0f1fb..c58727fa7d 100644 --- a/src/App/Resources/translations/App_fr.ts +++ b/src/App/Resources/translations/App_fr.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Nouveau @@ -41,37 +41,37 @@ L'utilisateur doit ensuite cliquer sur le bouton "Rafraîchir" dans la barre d'o App::LocalCoordinateSystem - + X-axis Axe X - + Y-axis Axe Y - + Z-axis Axe Z - + XY-plane Plan XY - + XZ-plane Plan XZ - + YZ-plane Plan YZ - + Origin Origine diff --git a/src/App/Resources/translations/App_hr.ts b/src/App/Resources/translations/App_hr.ts index 269294eb03..e618fade7a 100644 --- a/src/App/Resources/translations/App_hr.ts +++ b/src/App/Resources/translations/App_hr.ts @@ -14,7 +14,7 @@ na sve veze koje referenciraju isti konfigurabilni objekt QObject - + Unnamed Neimenovano @@ -44,37 +44,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X-axis - + Y-axis Y-axis - + Z-axis Z-axis - + XY-plane XY-plane - + XZ-plane XZ-plane - + YZ-plane YZ-plane - + Origin Ishodište diff --git a/src/App/Resources/translations/App_hu.ts b/src/App/Resources/translations/App_hu.ts index 7723824f10..b9da6e2210 100644 --- a/src/App/Resources/translations/App_hu.ts +++ b/src/App/Resources/translations/App_hu.ts @@ -14,7 +14,7 @@ amelyek ugyanarra a konfigurálható tárgyra hivatkoznak QObject - + Unnamed Névtelen @@ -44,37 +44,37 @@ A felhasználónak ezután a fő eszköztáron a Frissítés gombra kell kattint App::LocalCoordinateSystem - + X-axis X-tengely - + Y-axis Y-tengely - + Z-axis Z-tengely - + XY-plane XY sík - + XZ-plane XZ sík - + YZ-plane YZ sík - + Origin Kezdőpont diff --git a/src/App/Resources/translations/App_it.ts b/src/App/Resources/translations/App_it.ts index 807cd7aca5..2fcc7a17c0 100644 --- a/src/App/Resources/translations/App_it.ts +++ b/src/App/Resources/translations/App_it.ts @@ -14,7 +14,7 @@ che fanno riferimento allo stesso oggetto configurabile QObject - + Unnamed Senza nome @@ -42,37 +42,37 @@ L'utente dovrebbe quindi cliccare il pulsante Aggiorna nella barra degli strumen App::LocalCoordinateSystem - + X-axis Asse X - + Y-axis Asse Y - + Z-axis Asse Z - + XY-plane Piano XY - + XZ-plane Piano XZ - + YZ-plane Piano YZ - + Origin Origine diff --git a/src/App/Resources/translations/App_ja.ts b/src/App/Resources/translations/App_ja.ts index a969cbb30b..60dad576dc 100644 --- a/src/App/Resources/translations/App_ja.ts +++ b/src/App/Resources/translations/App_ja.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed 名称未設定 @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X軸 - + Y-axis Y軸 - + Z-axis Z軸 - + XY-plane XY平面 - + XZ-plane XZ平面 - + YZ-plane YZ平面 - + Origin 原点 diff --git a/src/App/Resources/translations/App_ka.ts b/src/App/Resources/translations/App_ka.ts index b9f479692c..5db09297a2 100644 --- a/src/App/Resources/translations/App_ka.ts +++ b/src/App/Resources/translations/App_ka.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed უსახელო @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X ღერძი - + Y-axis Y ღერძი - + Z-axis Z ღერძი - + XY-plane XY-სიბრტყე - + XZ-plane XZ-სიბრტყე - + YZ-plane YZ-სიბრტყე - + Origin კოორდინატების საწყისი diff --git a/src/App/Resources/translations/App_ko.ts b/src/App/Resources/translations/App_ko.ts index 81649b8fe5..b0279ae654 100644 --- a/src/App/Resources/translations/App_ko.ts +++ b/src/App/Resources/translations/App_ko.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed 이름없음 @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X-축 - + Y-axis Y-축 - + Z-axis Z-축 - + XY-plane XY-평면 - + XZ-plane XZ-평면 - + YZ-plane YZ-평면 - + Origin 원점 diff --git a/src/App/Resources/translations/App_nl.ts b/src/App/Resources/translations/App_nl.ts index 5c0c8c2ed3..638611c5bc 100644 --- a/src/App/Resources/translations/App_nl.ts +++ b/src/App/Resources/translations/App_nl.ts @@ -14,7 +14,7 @@ die verwijzen naar hetzelfde configureerbare object QObject - + Unnamed Naamloos @@ -43,37 +43,37 @@ Het is aanbevolen dat de gebruiker met de rechter muis knop de hoofdmap van het App::LocalCoordinateSystem - + X-axis X-as - + Y-axis Y-as - + Z-axis Z-as - + XY-plane XY-vlak - + XZ-plane XZ-vlak - + YZ-plane YZ-vlak - + Origin Oorsprong diff --git a/src/App/Resources/translations/App_pl.ts b/src/App/Resources/translations/App_pl.ts index 652ea64d49..b0d6e9d412 100644 --- a/src/App/Resources/translations/App_pl.ts +++ b/src/App/Resources/translations/App_pl.ts @@ -14,7 +14,7 @@ które odnoszą się do tego samego obiektu konfigurowalnego QObject - + Unnamed Nienazwany @@ -44,37 +44,37 @@ Użytkownik powinien następnie kliknąć przycisk Odśwież na głównym pasku App::LocalCoordinateSystem - + X-axis Oś X - + Y-axis Oś Y - + Z-axis Oś Z - + XY-plane Płaszczyzna XY - + XZ-plane Płaszczyzna XZ - + YZ-plane Płaszczyzna YZ - + Origin Odniesienie położenia diff --git a/src/App/Resources/translations/App_pt-BR.ts b/src/App/Resources/translations/App_pt-BR.ts index 70fb142648..c2e8848d35 100644 --- a/src/App/Resources/translations/App_pt-BR.ts +++ b/src/App/Resources/translations/App_pt-BR.ts @@ -14,7 +14,7 @@ que referenciam o mesmo objeto configurável QObject - + Unnamed Sem nome @@ -43,37 +43,37 @@ O usuário deve então clicar no botão Atualizar na barra de ferramentas princi App::LocalCoordinateSystem - + X-axis Eixo-X - + Y-axis Eixo-Y - + Z-axis Eixo-Z - + XY-plane Plano-XY - + XZ-plane Plano-XZ - + YZ-plane Plano-YZ - + Origin Origem diff --git a/src/App/Resources/translations/App_ro.ts b/src/App/Resources/translations/App_ro.ts index 5101093acd..c2e877cef2 100644 --- a/src/App/Resources/translations/App_ro.ts +++ b/src/App/Resources/translations/App_ro.ts @@ -14,7 +14,7 @@ care fac referire la același obiect configurabil QObject - + Unnamed Nedenumit @@ -44,37 +44,37 @@ Utilizatorul ar trebui ca după să apese pe butonul Reîmprospătare din bara d App::LocalCoordinateSystem - + X-axis Axa X - + Y-axis Axa Y - + Z-axis Axa Z - + XY-plane Planul XY - + XZ-plane Planul XZ - + YZ-plane Planul YZ - + Origin Origine diff --git a/src/App/Resources/translations/App_ru.ts b/src/App/Resources/translations/App_ru.ts index dfe8cc487c..816cebe63b 100644 --- a/src/App/Resources/translations/App_ru.ts +++ b/src/App/Resources/translations/App_ru.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Безымянный @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis Ось X - + Y-axis Ось Y - + Z-axis Ось Z - + XY-plane Плоскость XY - + XZ-plane Плоскость XZ - + YZ-plane Плоскость YZ - + Origin Начало координат diff --git a/src/App/Resources/translations/App_sl.ts b/src/App/Resources/translations/App_sl.ts index eb2319b1cd..dbf8238771 100644 --- a/src/App/Resources/translations/App_sl.ts +++ b/src/App/Resources/translations/App_sl.ts @@ -14,7 +14,7 @@ za vse povezave, ki se sklicujejo na isti nastavljivi predmet QObject - + Unnamed Neimenovan @@ -44,37 +44,37 @@ Nato naj v glavni orodni vrstici klikne gumb "Osveži". App::LocalCoordinateSystem - + X-axis Os X - + Y-axis Os Y - + Z-axis Os Z - + XY-plane Ravnina XY - + XZ-plane Ravnina XZ - + YZ-plane Ravnina YZ - + Origin Izhodišče diff --git a/src/App/Resources/translations/App_sr-CS.ts b/src/App/Resources/translations/App_sr-CS.ts index 195a56cde1..00a77a4665 100644 --- a/src/App/Resources/translations/App_sr-CS.ts +++ b/src/App/Resources/translations/App_sr-CS.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Bez imena @@ -44,37 +44,37 @@ Zatim korisnik treba da klikne na dugme Osveži koje se nalzi na glavnoj paleti App::LocalCoordinateSystem - + X-axis X-osa - + Y-axis Y-osa - + Z-axis Z-osa - + XY-plane XY ravan - + XZ-plane XZ ravan - + YZ-plane YZ ravan - + Origin Koordinatni početak diff --git a/src/App/Resources/translations/App_sr.ts b/src/App/Resources/translations/App_sr.ts index b14a7074e1..9bdc076b99 100644 --- a/src/App/Resources/translations/App_sr.ts +++ b/src/App/Resources/translations/App_sr.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Без имена @@ -44,37 +44,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X-оса - + Y-axis Y-оса - + Z-axis Z-оса - + XY-plane XY раван - + XZ-plane XZ раван - + YZ-plane YZ раван - + Origin Координатни почетак diff --git a/src/App/Resources/translations/App_sv-SE.ts b/src/App/Resources/translations/App_sv-SE.ts index 048be885e4..d74a69289a 100644 --- a/src/App/Resources/translations/App_sv-SE.ts +++ b/src/App/Resources/translations/App_sv-SE.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Namnlös @@ -43,37 +43,37 @@ Användaren bör sedan klicka på knappen Uppdatera i verktygsfältet. App::LocalCoordinateSystem - + X-axis X-axel - + Y-axis Y-axel - + Z-axis Z-axel - + XY-plane XY plan - + XZ-plane XZ plan - + YZ-plane YZ plan - + Origin Origo diff --git a/src/App/Resources/translations/App_tr.ts b/src/App/Resources/translations/App_tr.ts index 051bd71659..7c85e47c0f 100644 --- a/src/App/Resources/translations/App_tr.ts +++ b/src/App/Resources/translations/App_tr.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Adsız @@ -43,37 +43,37 @@ Kullanıcı daha sonra ana araç çubuğundaki Yenile düğmesine tıklamalıdı App::LocalCoordinateSystem - + X-axis X ekseni - + Y-axis Y ekseni - + Z-axis Z ekseni - + XY-plane XY düzlemi - + XZ-plane XZ düzlemi - + YZ-plane YZ düzlemi - + Origin Orijin diff --git a/src/App/Resources/translations/App_uk.ts b/src/App/Resources/translations/App_uk.ts index a6d70823aa..5c9c909f54 100644 --- a/src/App/Resources/translations/App_uk.ts +++ b/src/App/Resources/translations/App_uk.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Без назви @@ -41,37 +41,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis Вісь X - + Y-axis Вісь Y - + Z-axis - Вісь z + Вісь Z - + XY-plane XY-площина - + XZ-plane XZ-площина - + YZ-plane YZ-площина - + Origin Початок координат diff --git a/src/App/Resources/translations/App_zh-CN.ts b/src/App/Resources/translations/App_zh-CN.ts index 72dc42821d..de5bd91306 100644 --- a/src/App/Resources/translations/App_zh-CN.ts +++ b/src/App/Resources/translations/App_zh-CN.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed 未命名 @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X轴 - + Y-axis Y轴 - + Z-axis Z轴 - + XY-plane XY平面 - + XZ-plane XZ平面 - + YZ-plane YZ平面 - + Origin 原点 diff --git a/src/App/Resources/translations/App_zh-TW.ts b/src/App/Resources/translations/App_zh-TW.ts index 567bfdd49c..b2f4d7bf4e 100644 --- a/src/App/Resources/translations/App_zh-TW.ts +++ b/src/App/Resources/translations/App_zh-TW.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed 未命名 @@ -43,37 +43,37 @@ The user should then click the Refresh button in the main toolbar. App::LocalCoordinateSystem - + X-axis X軸 - + Y-axis Y軸 - + Z-axis Z軸 - + XY-plane XY平面 - + XZ-plane XZ平面 - + YZ-plane YZ平面 - + Origin 原點 diff --git a/src/Base/Resources/translations/Base.ts b/src/Base/Resources/translations/Base.ts index 056f91eed7..b67678bbe7 100644 --- a/src/Base/Resources/translations/Base.ts +++ b/src/Base/Resources/translations/Base.ts @@ -9,12 +9,12 @@ - + MKS (m, kg, s, °) - + US customary (in, lb) @@ -24,12 +24,12 @@ - + Building Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ - + Imperial for Civil Eng (ft, ft/s) - + FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_be.ts b/src/Base/Resources/translations/Base_be.ts index cab9f76c2d..4b6b87e9ec 100644 --- a/src/Base/Resources/translations/Base_be.ts +++ b/src/Base/Resources/translations/Base_be.ts @@ -9,12 +9,12 @@ Стандартная (мм, кг, с, °) - + MKS (m, kg, s, °) Сістэма МКС (м, кг, с, °) - + US customary (in, lb) Звычайная Злучаных Штатаў (цалі, фунты) @@ -24,12 +24,12 @@ Брытанская сістэма (цалі, фунты) - + Building Euro (cm, m², m³) Еўрапейская будаўнічая (см, м², м³) - + Building US (ft-in, sqft, cft) Будаўнічая Злучаных Штатаў (футы-цалі, кв. футы, куб. футы) @@ -39,12 +39,12 @@ Малыя метрычныя дэталі і CNC (мм, мм/хв) - + Imperial for Civil Eng (ft, ft/s) Брытанская для грамадскіх інжынераў (футы, футы/с) - + FEM (mm, N, s) МКЭ (мм, Н, с) diff --git a/src/Base/Resources/translations/Base_ca.ts b/src/Base/Resources/translations/Base_ca.ts index 3f1f235f1f..bfca0f4a34 100644 --- a/src/Base/Resources/translations/Base_ca.ts +++ b/src/Base/Resources/translations/Base_ca.ts @@ -9,12 +9,12 @@ Sistema Estàndard (mm, kg, s, °) - + MKS (m, kg, s, °) Sistema MKS (m, kg, s, °) - + US customary (in, lb) Sistema US (in, lb) @@ -24,12 +24,12 @@ Sistema imperial decimal (in, lb) - + Building Euro (cm, m², m³) Sistema Construcció Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Sistema Construcció US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Mètrica per a peces petites i CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Sistema Imperial per Enginyeria Civil (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_cs.ts b/src/Base/Resources/translations/Base_cs.ts index d887061a2c..7c060928f8 100644 --- a/src/Base/Resources/translations/Base_cs.ts +++ b/src/Base/Resources/translations/Base_cs.ts @@ -9,12 +9,12 @@ Standardní (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Obvyklé v USA (in, lb) @@ -24,12 +24,12 @@ Imperiální desetinné (palce, libry) - + Building Euro (cm, m², m³) Stavební Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Stavební US (ft-in, sqft, cuft) @@ -39,12 +39,12 @@ Metrické malé díly & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperiální pro stavebnictví (ft, ft/s) - + FEM (mm, N, s) MKP (mm, N, s) diff --git a/src/Base/Resources/translations/Base_de.ts b/src/Base/Resources/translations/Base_de.ts index ad2342d98a..41524d7a5b 100644 --- a/src/Base/Resources/translations/Base_de.ts +++ b/src/Base/Resources/translations/Base_de.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) US Customary (in, lb) @@ -24,12 +24,12 @@ Angloamerikanisch dezimal (in, lb) - + Building Euro (cm, m², m³) Euro-Bauwesen (cm, m², m³) - + Building US (ft-in, sqft, cft) US-Bauwesen (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrische Kleinteile & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Angloamerikanisch für Bauingenieurwesen (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_el.ts b/src/Base/Resources/translations/Base_el.ts index 757ec4ae15..f198576d84 100644 --- a/src/Base/Resources/translations/Base_el.ts +++ b/src/Base/Resources/translations/Base_el.ts @@ -9,12 +9,12 @@ Στάνταρ (mm, kg, s, ") - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Μονάδες ΗΠΑ (ίντσες/λίβρες) @@ -24,12 +24,12 @@ Αγγλοσαξονικό Συστήματος Μονάδων (ίντσες/λίβρες) - + Building Euro (cm, m², m³) Μονάδες Μέτρησης Ευρώπης (εκατοστά cm,/τετραγωνικά μέτρα cm²/κυβικά μέτρα m³) - + Building US (ft-in, sqft, cft) Μονάδες Μέτρησης ΗΠΑ (πόδια-ίντσες/τετραγωνικά πόδια/κυβικά πόδια) @@ -39,12 +39,12 @@ Μετρικό σύστημα μικρών εξαρτημάτων & CNC (χιλιοστά mm, χιλιοστά/λεπτά mm/min) - + Imperial for Civil Eng (ft, ft/s) Αγγλοσαξονικό σύστημά (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, sec) diff --git a/src/Base/Resources/translations/Base_es-ES.ts b/src/Base/Resources/translations/Base_es-ES.ts index 0505fd655b..87bb8fac1d 100644 --- a/src/Base/Resources/translations/Base_es-ES.ts +++ b/src/Base/Resources/translations/Base_es-ES.ts @@ -9,12 +9,12 @@ Estándar (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Sistema estadounidense (EE. UU) (in, lb) @@ -24,12 +24,12 @@ Decimales imperiales (in, lb) - + Building Euro (cm, m², m³) Construcción Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Construcción US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Piezas pequeñas métricas y CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperial para Ing. civil (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_eu.ts b/src/Base/Resources/translations/Base_eu.ts index 856c51e440..5e4e389a88 100644 --- a/src/Base/Resources/translations/Base_eu.ts +++ b/src/Base/Resources/translations/Base_eu.ts @@ -9,12 +9,12 @@ Estandarra (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) AEBko pertsonalizatua (in, lb) @@ -24,12 +24,12 @@ Dezimal inperiala (in, lb) - + Building Euro (cm, m², m³) Europar neurriak (cm, m², m³) - + Building US (ft-in, sqft, cft) AEBetako neurriak (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metric small parts & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperial for Civil Eng (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_fi.ts b/src/Base/Resources/translations/Base_fi.ts index 09036e45ad..dd975bc9e9 100644 --- a/src/Base/Resources/translations/Base_fi.ts +++ b/src/Base/Resources/translations/Base_fi.ts @@ -9,12 +9,12 @@ Standardi (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) USA:n yksikköjärjestelmä (tuumat/ paunat) @@ -24,12 +24,12 @@ Englantilainen desimaaliluku (tuumat / paunat) - + Building Euro (cm, m², m³) Rakentaminen Euro (cm/m²/m³) - + Building US (ft-in, sqft, cft) Rakentaminen USA (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrinen, pienet osat & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Brittiläinen, maa- ja vesirakentaminen (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_fr.ts b/src/Base/Resources/translations/Base_fr.ts index bb5476fc79..062434c880 100644 --- a/src/Base/Resources/translations/Base_fr.ts +++ b/src/Base/Resources/translations/Base_fr.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Unités états-uniennes (in, lb) @@ -24,12 +24,12 @@ Système impérial (in, lb) - + Building Euro (cm, m², m³) Construction européenne (cm, m², m³) - + Building US (ft-in, sqft, cft) Construction états-unienne (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Métrique, petites pièces & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Impérial pour le génie civil (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_hr.ts b/src/Base/Resources/translations/Base_hr.ts index e891399fbb..e01fc4bc4c 100644 --- a/src/Base/Resources/translations/Base_hr.ts +++ b/src/Base/Resources/translations/Base_hr.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) U. S. prilagođeno (in, lb) @@ -24,12 +24,12 @@ Carski decimalni (in, lb) - + Building Euro (cm, m², m³) Europska Gradnja (cm, m², m³) - + Building US (ft-in, sqft, cft) Gradnja US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrički mali dijelovi & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperijal za civilno Eng (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_hu.ts b/src/Base/Resources/translations/Base_hu.ts index e6a3119f7c..37e9e16dfd 100644 --- a/src/Base/Resources/translations/Base_hu.ts +++ b/src/Base/Resources/translations/Base_hu.ts @@ -9,12 +9,12 @@ Alapértelmezett (mm, kg, s, °) - + MKS (m, kg, s, °) MKS rendszer (m, kg, s, °) - + US customary (in, lb) US szokásos (in, lb) @@ -24,12 +24,12 @@ Császári decimális (in, lb) - + Building Euro (cm, m², m³) Épület Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Építészet US (láb-hüvelyk, négyzetláb, köbláb) @@ -39,12 +39,12 @@ Metrikus kis alkatrészek és CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperial polgári mérnöki (láb, láb/sec) - + FEM (mm, N, s) VEM (mm, N, mp) diff --git a/src/Base/Resources/translations/Base_it.ts b/src/Base/Resources/translations/Base_it.ts index 85e3b6376c..da206c1c0e 100644 --- a/src/Base/Resources/translations/Base_it.ts +++ b/src/Base/Resources/translations/Base_it.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Tradizionale US (in, lb) @@ -24,12 +24,12 @@ Imperiale decimale (in, lb) - + Building Euro (cm, m², m³) Costruttivo Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Costruttivo US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrico piccole parti & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperiale per Ingegneria Civile (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_ja.ts b/src/Base/Resources/translations/Base_ja.ts index 83f32b7400..b166f419c5 100644 --- a/src/Base/Resources/translations/Base_ja.ts +++ b/src/Base/Resources/translations/Base_ja.ts @@ -9,12 +9,12 @@ 標準（mm, kg, s, °） - + MKS (m, kg, s, °) MKS単位系（m, kg, s, °） - + US customary (in, lb) 米国慣用単位（in, lb） @@ -24,12 +24,12 @@ 帝国単位（in, lb） - + Building Euro (cm, m², m³) 建築：メートル法（cm, m², m³） - + Building US (ft-in, sqft, cft) 建築：国際フィート（ft-in, sqft, cft） @@ -39,12 +39,12 @@ パーツ、CNC工作機械（mm、mm/min） - + Imperial for Civil Eng (ft, ft/s) 土木工学：帝国単位（ft, ft/s） - + FEM (mm, N, s) 有限要素法（mm, N, s） diff --git a/src/Base/Resources/translations/Base_ka.ts b/src/Base/Resources/translations/Base_ka.ts index 85eee4ed67..efe81271a1 100644 --- a/src/Base/Resources/translations/Base_ka.ts +++ b/src/Base/Resources/translations/Base_ka.ts @@ -9,12 +9,12 @@ სტანდარტული (მმ, კგ, წმ, °) - + MKS (m, kg, s, °) სი (მ, კგ, წმ, °) - + US customary (in, lb) US საბაჟო ერთეულები (დუიმი, გირვანქა) @@ -24,12 +24,12 @@ იმპერიული საზ. ერთ.(დუი, გირვან) - + Building Euro (cm, m², m³) სამშენებლო ევრო (სმ, მ², მ³) - + Building US (ft-in, sqft, cft) სამშენებლო აშშ (ფუტი-დუიმი,კვ. ფტ, კუბ. ფტ.) @@ -39,12 +39,12 @@ მეტრული პატარა ნაწილები & CNC(მმ, მმ/წთ) - + Imperial for Civil Eng (ft, ft/s) იმპერიული საზომი ერთეულები სამოქალაქო ინჟინერიისთვის(ფუტები, ფუტები/წმ) - + FEM (mm, N, s) სასრული ელემენტების მეთოდი (მმ, ნ, წმ) diff --git a/src/Base/Resources/translations/Base_ko.ts b/src/Base/Resources/translations/Base_ko.ts index 0cf7f323d9..f237a6b943 100644 --- a/src/Base/Resources/translations/Base_ko.ts +++ b/src/Base/Resources/translations/Base_ko.ts @@ -9,12 +9,12 @@ 표준 단위계(mm, kg, s, °) - + MKS (m, kg, s, °) MKS 단위계 (m, kg, s, °) - + US customary (in, lb) 미국 단위계(in, lb) @@ -24,12 +24,12 @@ 영국 단위계(in/lb) - + Building Euro (cm, m², m³) 유럽식 건축단위 (cm/m²/m³) - + Building US (ft-in, sqft, cft) 미국식 건축단위 (ft-in/sqft/cft) @@ -39,12 +39,12 @@ Metric small parts & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) 영국식 토목단위 (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_nl.ts b/src/Base/Resources/translations/Base_nl.ts index 3b08d2c8d7..5d9d6ec5a7 100644 --- a/src/Base/Resources/translations/Base_nl.ts +++ b/src/Base/Resources/translations/Base_nl.ts @@ -9,12 +9,12 @@ Standaard (mm, kg, s, graden) - + MKS (m, kg, s, °) MKS (m, kg, s, graden) - + US customary (in, lb) Amerikaans (in, lb) @@ -24,12 +24,12 @@ Engels (in, lb) - + Building Euro (cm, m², m³) Bouw (Europees) (cm, m², m³) - + Building US (ft-in, sqft, cft) Bouw (Amerikaans) (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrische kleine onderdelen en CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Engelse eenheden voor Civiele Engineering (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_pl.ts b/src/Base/Resources/translations/Base_pl.ts index c5082c8526..37c462d44f 100644 --- a/src/Base/Resources/translations/Base_pl.ts +++ b/src/Base/Resources/translations/Base_pl.ts @@ -9,12 +9,12 @@ Standardowe (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Zwyczajowy USA (in, lb) @@ -24,12 +24,12 @@ Dziesiętny brytyjski (in, lb) - + Building Euro (cm, m², m³) Budowlany europejski (cm, m², m³) - + Building US (ft-in, sqft, cft) Budowlany USA (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metryczny dla mniejszych części i CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Inżynieria lądowa brytyjski (ft, ft/s) - + FEM (mm, N, s) MES (mm, N, s) diff --git a/src/Base/Resources/translations/Base_pt-BR.ts b/src/Base/Resources/translations/Base_pt-BR.ts index 3007341f25..c939b61d8a 100644 --- a/src/Base/Resources/translations/Base_pt-BR.ts +++ b/src/Base/Resources/translations/Base_pt-BR.ts @@ -9,12 +9,12 @@ Padrão (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Padrão US (in/lb) @@ -24,12 +24,12 @@ Decimal Imperial (in / lb) - + Building Euro (cm, m², m³) Construção Euro (cm/m²/m³) - + Building US (ft-in, sqft, cft) Construção US (ft-in/sqft/cft) @@ -39,12 +39,12 @@ Métrico peças pequenas & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperial para Engenharia Civil (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_ro.ts b/src/Base/Resources/translations/Base_ro.ts index ff6691c42b..9d963987dc 100644 --- a/src/Base/Resources/translations/Base_ro.ts +++ b/src/Base/Resources/translations/Base_ro.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Sistem imperial -SUA- (in/lb) @@ -24,12 +24,12 @@ Zecimale imperiale (in, lb) - + Building Euro (cm, m², m³) Construcție unități măsură metrice -Europeană - (cm/m²/m³) - + Building US (ft-in, sqft, cft) Construcție SUA (ft-in/sqft/cft) @@ -39,12 +39,12 @@ Metric - piese mici & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperial pentru Inginerie Civilă (ft, ft/sec) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_ru.ts b/src/Base/Resources/translations/Base_ru.ts index 37580b2733..9171aaad09 100644 --- a/src/Base/Resources/translations/Base_ru.ts +++ b/src/Base/Resources/translations/Base_ru.ts @@ -9,12 +9,12 @@ Стандартная система мер (мм, кг, сек, угол) - + MKS (m, kg, s, °) МКС (м, кг, сек, градус) - + US customary (in, lb) Американская традиционная система мер (дюймы, фунты) @@ -24,12 +24,12 @@ Английская десятичная (дюймы, фунты) - + Building Euro (cm, m², m³) Строительство Евро (см, м², м³) - + Building US (ft-in, sqft, cft) Строительство США (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Метрические мелкие детали & ЧПУ (мм, мм/мин) - + Imperial for Civil Eng (ft, ft/s) Английская для гражданского строительства (фут, фут/с) - + FEM (mm, N, s) МКЭ (мм, Н, с) diff --git a/src/Base/Resources/translations/Base_sl.ts b/src/Base/Resources/translations/Base_sl.ts index 1540fcd62e..7ebd13f19c 100644 --- a/src/Base/Resources/translations/Base_sl.ts +++ b/src/Base/Resources/translations/Base_sl.ts @@ -9,12 +9,12 @@ Standardni (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Ameriške (palci, funti) @@ -24,12 +24,12 @@ Anglosaške decimalke (palci, funti) - + Building Euro (cm, m², m³) Metrični gradbeni (cm, m², m³) - + Building US (ft-in, sqft, cft) ZDA gradbeni (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrični za drobne dele in CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Anglosaške gradbene (ft, ft/s) - + FEM (mm, N, s) MKE (mm, N, s) diff --git a/src/Base/Resources/translations/Base_sr-CS.ts b/src/Base/Resources/translations/Base_sr-CS.ts index e8ae147368..42d0d96150 100644 --- a/src/Base/Resources/translations/Base_sr-CS.ts +++ b/src/Base/Resources/translations/Base_sr-CS.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) US sistem jedinica (in, lb) @@ -24,12 +24,12 @@ Imperijalni decimalni (in, lb) - + Building Euro (cm, m², m³) Građevinski Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Građevinski US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrički mali delovi & CNC(mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Imperijalni za građevinarstvo (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_sr.ts b/src/Base/Resources/translations/Base_sr.ts index 8b90bda0c1..5696944710 100644 --- a/src/Base/Resources/translations/Base_sr.ts +++ b/src/Base/Resources/translations/Base_sr.ts @@ -9,12 +9,12 @@ Cтандард (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) US cиcтем јединица (in, lb) @@ -24,12 +24,12 @@ Империјални децимални (in, lb) - + Building Euro (cm, m², m³) Грађевински Euro (cm, m², m³) - + Building US (ft-in, sqft, cft) Грађевински US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Метрички мали делови & CNC(mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Империјални за грађевинарство (ft, ft/s) - + FEM (mm, N, s) МКЕ (mm, N, s) diff --git a/src/Base/Resources/translations/Base_sv-SE.ts b/src/Base/Resources/translations/Base_sv-SE.ts index ab1befec80..51480ab406 100644 --- a/src/Base/Resources/translations/Base_sv-SE.ts +++ b/src/Base/Resources/translations/Base_sv-SE.ts @@ -9,12 +9,12 @@ Standard (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) Amerikanska enheter (in/lb) @@ -24,12 +24,12 @@ Brittiska enheter (in/lb) - + Building Euro (cm, m², m³) Europeiska byggenheter (cm, m², m³) - + Building US (ft-in, sqft, cft) Amerikanska byggenheter (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Meter små delar och CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Brittiska enheter för civilingenjörer (fot, fot/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_tr.ts b/src/Base/Resources/translations/Base_tr.ts index f94da3e7d9..029b01e699 100644 --- a/src/Base/Resources/translations/Base_tr.ts +++ b/src/Base/Resources/translations/Base_tr.ts @@ -9,12 +9,12 @@ Standart (mm, kg, s, °) - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) US geleneksel (in, lb) @@ -24,12 +24,12 @@ İmparatorluk onluk (in, lb) - + Building Euro (cm, m², m³) Yapı Avrupa (cm, m², m³) - + Building US (ft-in, sqft, cft) Yapı US (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Metrik küçük parçalar ve CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) Sivil İngiliz için İmparatorluk (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_uk.ts b/src/Base/Resources/translations/Base_uk.ts index ea06027e39..b35e1cf376 100644 --- a/src/Base/Resources/translations/Base_uk.ts +++ b/src/Base/Resources/translations/Base_uk.ts @@ -9,12 +9,12 @@ Стандарт (мм, кг, с, градус) - + MKS (m, kg, s, °) МКС (м, кг, с, градус) - + US customary (in, lb) Умовні позначення США (дюйми, фунти) @@ -24,12 +24,12 @@ Імперська десяткова система (дюйми, фунти) - + Building Euro (cm, m², m³) Будівництво Євро (см, м², м³) - + Building US (ft-in, sqft, cft) Будівництво США (ft-in, sqft, cft) @@ -39,12 +39,12 @@ Метричні дрібні деталі та ЧПК (мм, мм/хв) - + Imperial for Civil Eng (ft, ft/s) Імперська для цивільних (ft, ft/с) - + FEM (mm, N, s) МСЕ (мм, Н, с) diff --git a/src/Base/Resources/translations/Base_zh-CN.ts b/src/Base/Resources/translations/Base_zh-CN.ts index 977df32977..96aa0fc365 100644 --- a/src/Base/Resources/translations/Base_zh-CN.ts +++ b/src/Base/Resources/translations/Base_zh-CN.ts @@ -9,12 +9,12 @@ 标准 (mm, kg, s, °) - + MKS (m, kg, s, °) 公制 (m, kg, s, °) - + US customary (in, lb) 美制 (in, lb) @@ -24,12 +24,12 @@ 英制 (in, lb) - + Building Euro (cm, m², m³) 欧规 (cm, m², m³) - + Building US (ft-in, sqft, cft) 美制 (ft-in, sqft, cft) @@ -39,12 +39,12 @@ 公制小零件与数控 (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) 英制 (ft, ft/s) - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Base/Resources/translations/Base_zh-TW.ts b/src/Base/Resources/translations/Base_zh-TW.ts index 4a11711f95..9205472d83 100644 --- a/src/Base/Resources/translations/Base_zh-TW.ts +++ b/src/Base/Resources/translations/Base_zh-TW.ts @@ -9,12 +9,12 @@ 標準（mm、kg、s、°） - + MKS (m, kg, s, °) MKS (m, kg, s, °) - + US customary (in, lb) 美制（in、lb） @@ -24,12 +24,12 @@ 英制（in、lb） - + Building Euro (cm, m², m³) 歐洲建築（cm、m²、m³） - + Building US (ft-in, sqft, cft) 美國建築（ft-in、sqft、cft） @@ -39,12 +39,12 @@ 公制小零件 & CNC (mm, mm/min) - + Imperial for Civil Eng (ft, ft/s) 英制土木工程（ft、ft/s） - + FEM (mm, N, s) FEM (mm, N, s) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 576bc2c4b0..fa21d64c13 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -557,22 +557,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename - + Renames the object - + Finish Editing - + Finishes editing the object @@ -1341,72 +1341,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars - + Category - + Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New - + Rename - + Delete - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> @@ -5995,12 +5995,12 @@ Save all changes? - + Macro file doesn't exist - + No such macro file: '%1' @@ -6350,72 +6350,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit - + property - + Copy - + Add Property - + Rename Property Group - + Rename Property - + Delete Property - + Rename property - + Show Hidden - + Auto-Expand - + Expression - + Property name - + Rename property group - + Group name: @@ -7755,17 +7755,64 @@ Check the report view for more details. - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version - + + Welcome to %1 v%2.%3 + + + + + Welcome to %1 v%2.%3 + + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + + Migrating + + + + + Migrating configuration data and addons... + + + + + Migration complete. Restarting... + + + + + Restarting + + + + + Migration failed + + + + + Migration failed. See the Report View for details. + + + + Exception @@ -8343,12 +8390,12 @@ Choose 'Abort' to abort - + Out of memory - + Not enough memory available to display the data. @@ -8364,7 +8411,7 @@ Choose 'Abort' to abort - + Navigation styles @@ -8414,11 +8461,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros - - - Origin - - Delete group content? diff --git a/src/Gui/Language/FreeCAD_be.ts b/src/Gui/Language/FreeCAD_be.ts index 6769d75fa5..a9f80c7310 100644 --- a/src/Gui/Language/FreeCAD_be.ts +++ b/src/Gui/Language/FreeCAD_be.ts @@ -328,7 +328,7 @@ Store in VarSet... - Store in VarSet... + Запомніць у наборы зменных… @@ -557,22 +557,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Пераназваць - + Renames the object Пераназваць аб'ект - + Finish Editing Скончыць праўку - + Finishes editing the object Скончыць праўку аб'екта @@ -1348,76 +1348,76 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Панэлі інструментаў - + Category Катэгорыя - + Move Right Рушыць направа - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Рухае абраны элемент на адзін узровень уніз.</b> Гэта таксама зменіць узровень бацькоўскага элемента. - + Move Left Рушыць налева - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Рухае абраны элемент на адзін узровень уверх.</b> Гэта таксама зменіць узровень бацькоўскага элемента. - + Move Up Рухаць уверх - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Рухае абраны элемент уверх.</b> Элемент будзе зрушаны ў межах узроўню іерархіі. - + Move Down Рухаць уніз - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Рухае абраны элемент уніз.</b> Элемент будзе зрушаны ў межах узроўню іерархіі. - + New Новы - + Rename Пераназваць - + Delete Выдаліць - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Заўвага:</span> Змены стануць актыўнымі ў наступнай загрузцы адпаведнага варштату</p></body></html> @@ -6081,12 +6081,12 @@ Save all changes? Макрас - + Macro file doesn't exist Файл макраса не існуе - + No such macro file: '%1' Файл макраса адсутнічае: '%1' @@ -6443,72 +6443,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Змяніць - + property уласцівасць - + Copy Скапіраваць - + Add Property Дадаць уласцівасць - + Rename Property Group Пераназваць суполку ўласцівасцяў - + Rename Property Пераназваць уласцівасць - + Delete Property Выдаліць уласцівасць - + Rename property Пераназваць уласцівасць - + Show Hidden Паказаць схаваныя - + Auto-Expand Разгарнуць аўтаматычна - + Expression Выраз - + Property name Назва ўласцівасці - + Rename property group Пераназваць суполку ўласцівасцяў - + Group name: Назва суполкі: @@ -7858,19 +7858,68 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. Ваша сістэма працуе пад кіраваннем OpenGL%1.%2. Для FreeCAD патрабуецца OpenGL версіі 2.0 ці вышэй. Абновіце ваш графічны драйвер і/ці відэакарту па неабходнасці. - + Invalid OpenGL Version Хібная версія OpenGL - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Выключэнне @@ -8463,12 +8512,12 @@ Choose 'Abort' to abort Немагчыма запусціць сістэмны аглядальнік. - + Out of memory Не хапае памяці - + Not enough memory available to display the data. Недастаткова памяці для адлюстравання дадзеных. @@ -8484,7 +8533,7 @@ Choose 'Abort' to abort Не атрымалася знайсці файл %1 ні ў %2, ні ў %3 - + Navigation styles Стылі навігацыі @@ -8535,11 +8584,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Не дазваляецца выдаляць агульнасістэмныя макрасы - - - Origin - Пачатак каардынат - Delete group content? @@ -9852,7 +9896,7 @@ the current copy will be lost. Preselects the object in 3D view when hovering the cursor over the tree item - Preselects the object in 3D view when hovering the cursor over the tree item + Папярэдне абірае аб'ект у трохмерным прадстаўленні пры навядзенні паказальніка мышы на элемент дрэва @@ -12819,7 +12863,7 @@ the region are non-opaque. Theme Parameters - Fallback - Theme Parameters - Fallback + Налады тэмы - рэзервовы варыянт @@ -14400,43 +14444,43 @@ This makes the docked panel stay transparent at all times. (Warning: unit discarded) - (Warning: unit discarded) + (Папярэджанне: прылада выкінутая) Invalid property name: %1 - Invalid property name: %1 + Хібная назва ключа: %1 Unknown object - Unknown object + Невядомы абьект the name cannot be empty - the name cannot be empty + назва не можа быць пустая %1 is a unit - %1 is a unit + %1 - адзінка вымярэння %1 is a constant - %1 is a constant + %1 - канстанта %1 already exists - %1 already exists + %1 ужо існуе Invalid group name: %1 - Invalid group name: %1 + Хібная назва суполкі: %1 @@ -14556,17 +14600,17 @@ This makes the docked panel stay transparent at all times. Value out of range (%1 out of [%2, %3]) - Value out of range (%1 out of [%2, %3]) + Значэнне па-за дыяпазону (%1 з [%2, %3]) Not a number - Not a number + Не лічба Unit mismatch between result and required unit - Unit mismatch between result and required unit + Неадпаведнасць выніку і патрэбнай адзінкі вымярэння diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 4099c75c69..c632d32359 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -328,7 +328,7 @@ Store in VarSet... - Store in VarSet... + Emmagatzemar a VarSet... @@ -338,7 +338,7 @@ Variable Set - Variable Set + Conjunt de Variables @@ -557,22 +557,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Reanomena - + Renames the object Reanomena l'objecte - + Finish Editing Finalitza l'edició - + Finishes editing the object Finalitza l'edició de l'objecte @@ -1345,72 +1345,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Barres d'eines - + Category Categoria - + Move Right Mou a la dreta - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Mou l'element seleccionat un nivell cap avall.</b><p>Això també canvia el nivell de l'element pare.</p> - + Move Left Moure a l'Esquerra - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Mou l'element seleccionat un nivell cap amunt.</b><p>Això també canvia el nivell de l'element pare.</p> - + Move Up Mou amunt - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Mou l'element seleccionat cap amunt.</b><p>L'element es mourà dins del nivell de jerarquia.</p> - + Move Down Mou avall - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Mou l'element seleccionat cap avall.</b><p>L'element es mourà dins del nivell de jerarquia.</p> - + New Nou - + Rename Reanomena - + Delete Elimina - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Nota:</span> Els canvis s'activaran la propera vegada que carregueu el banc de treball apropiat</p></body></html> @@ -6052,12 +6052,12 @@ Voleu desar tots els canvis? Macros - + Macro file doesn't exist El fitxer de macro no existeix. - + No such macro file: '%1' No existeix aquest fitxer de macro: '%1' @@ -6408,72 +6408,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Edita - + property propietat - + Copy Copia - + Add Property Afegir Propietat - + Rename Property Group Reanomena el nom del grup de propietats - + Rename Property Reanomena la propietat - + Delete Property Eliminar Propietat - + Rename property Reanomena la propietat - + Show Hidden Mostrar ocults - + Auto-Expand Auto expandir - + Expression Expressió - + Property name Nom de la propietat - + Rename property group Canvia el nom del grup de propietats - + Group name: Nom del grup: @@ -7817,17 +7817,66 @@ Comproveu la vista d'informes per a veure més detalls. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. Aquest sistema està executant OpenGL %1.%2. FreeCAD requereix OpenGL 2.0 o superior. Actualitzeu el controlador de gràfics i/o la targeta segons calgui. - + Invalid OpenGL Version Versió d'OpenGL invàlida - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Excepció @@ -8414,12 +8463,12 @@ Trieu «Interromp» per a interrompre No es pot obrir el navegador del sistema. - + Out of memory No hi ha prou memòria. - + Not enough memory available to display the data. No hi ha prou memòria disponible per a mostrar les dades. @@ -8435,7 +8484,7 @@ Trieu «Interromp» per a interrompre No s'ha trobat el fitxer %1 ni en %2 ni en %3 - + Navigation styles Estils de navegació @@ -8485,11 +8534,6 @@ Trieu «Interromp» per a interrompre Not allowed to delete system-wide macros No es permet eliminar les macros del sistema - - - Origin - Origen - Delete group content? @@ -9595,7 +9639,7 @@ la còpia actual es perdrà. Switches stereo viewing to interleaved columns - Switches stereo viewing to interleaved columns + Canvia la vista estèreo a columnes intercalades @@ -9608,7 +9652,7 @@ la còpia actual es perdrà. Switches stereo viewing to interleaved rows - Switches stereo viewing to interleaved rows + Canvia la vista estèreo a files intercalades @@ -9621,7 +9665,7 @@ la còpia actual es perdrà. Switches stereo viewing off - Switches stereo viewing off + Canvia la vista estèreo a desactivada @@ -9634,7 +9678,7 @@ la còpia actual es perdrà. Sets the camera to the left view - Sets the camera to the left view + Estableix la càmera a la vista esquerra @@ -9647,7 +9691,7 @@ la còpia actual es perdrà. Sets the camera to the rear view - Sets the camera to the rear view + Estableix la càmera a la vista posterior @@ -9660,7 +9704,7 @@ la còpia actual es perdrà. Sets the camera to the right view - Sets the camera to the right view + Estableix la càmera a la vista dreta @@ -9673,7 +9717,7 @@ la còpia actual es perdrà. Rotates the view by 90° counter-clockwise - Rotates the view by 90° counter-clockwise + Gira la vista 90° en sentit antihorari @@ -9686,7 +9730,7 @@ la còpia actual es perdrà. Sets the camera to the top view - Sets the camera to the top view + Estableix la càmera a la vista superior @@ -9699,7 +9743,7 @@ la còpia actual es perdrà. Sets the camera to the trimetric view - Sets the camera to the trimetric view + Estableix la càmera a la vista trimètrica @@ -9712,7 +9756,7 @@ la còpia actual es perdrà. Opens the documentation for the selected command - Opens the documentation for the selected command + Obre la documentació de l'ordre seleccionada @@ -9720,7 +9764,7 @@ la còpia actual es perdrà. Activate Window - Activate Window + Activa finestra @@ -9738,7 +9782,7 @@ la còpia actual es perdrà. Switches between workbenches - Switches between workbenches + Canvia entre bancs de treball @@ -9751,7 +9795,7 @@ la còpia actual es perdrà. Displays the main window in fullscreen mode - Displays the main window in fullscreen mode + Mostrar la finestra principal en mode de pantalla completa @@ -9759,7 +9803,7 @@ la còpia actual es perdrà. Orthographic View - Orthographic View + Vista ortogràfica @@ -9772,7 +9816,7 @@ la còpia actual es perdrà. Perspective View - Perspective View + Vista en perspectiva @@ -9790,7 +9834,7 @@ la còpia actual es perdrà. Expands the active document and collapses all others - Expands the active document and collapses all others + Expandeix el document actiu i contrau tots els altres @@ -9803,7 +9847,7 @@ la còpia actual es perdrà. Preselects the object in 3D view when hovering the cursor over the tree item - Preselects the object in 3D view when hovering the cursor over the tree item + Preselecciona l'objecte a la vista 3D quan passa el cursor per sobre de l'element de l'arbre @@ -9816,7 +9860,7 @@ la còpia actual es perdrà. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Mostra la vista activa en pantalla completa, en mode desacoblat o acoblat @@ -9829,7 +9873,7 @@ la còpia actual es perdrà. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Mostra la vista activa en pantalla completa, en mode desacoblat o acoblat @@ -9837,7 +9881,7 @@ la còpia actual es perdrà. Save &Image… - Save &Image… + Desa la &imatge… @@ -9855,7 +9899,7 @@ la còpia actual es perdrà. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Mostra la vista activa en pantalla completa, en mode desacoblat o acoblat @@ -9868,7 +9912,7 @@ la còpia actual es perdrà. Increases the zoom factor by a fixed amount - Increases the zoom factor by a fixed amount + Augmenta el factor de zoom en una quantitat fixa @@ -9881,7 +9925,7 @@ la còpia actual es perdrà. Decreases the zoom factor by a fixed amount - Decreases the zoom factor by a fixed amount + Disminueix el factor de zoom en una quantitat fixa @@ -9892,9 +9936,7 @@ la còpia actual es perdrà. Continue? - The following referencing objects might break. - -Continue? + Els següents objectes de referència es podrien trencar. Continuar? @@ -10039,7 +10081,7 @@ Voleu desar el document ara? Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled - Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled + Mostra una icona d'un ull davant dels elements de la vista d'arbre, mostrant l'estat de visibilitat dels elements. Quan es fa clic, la visibilitat canvia @@ -10077,22 +10119,22 @@ Voleu desar el document ara? Standard &Views - Standard &Views + &Vistes estàndard Individual Views - Individual Views + Vistes individuals &Online Help - &Online Help + &Ajuda en línia Link Actions - Link Actions + Enllaça accions @@ -10214,41 +10256,41 @@ Voleu desar el document ara? Enable Notification Area - Enable Notification Area + Activa l'àrea de notificació Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. - Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. + Habilita notificacions emergents no intrusives a sobre de l'àrea de notificacions de la barra d'estat. Les notificacions emergents es poden tancar manualment fent-hi clic i també es poden tancar automàticament especificant una durada màxima i mínima per a la seva visualització. -Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. +A més, les notificacions emergents es poden desactivar. En aquest cas, l'usuari encara pot utilitzar l'àrea de notificacions com a ubicació d'accés ràpid per veure les notificacions, sense la distracció d'una finestra emergent addicional. Enable Pop-Up Notifications - Enable Pop-Up Notifications + Activar notificacions emergents Minimum duration - Minimum duration + Durada mínima Maximum duration - Maximum duration + Durada màxima Maximum concurrent notification count - Maximum concurrent notification count + Nombre màxim de notificacions simultànies Notification bubble width - Notification bubble width + Ample de la pantalla de notificació @@ -10283,7 +10325,7 @@ Additionally, pop-up notifications can be disabled. In this case the user can st Additional Data Sources - Additional Data Sources + Orígens de dades addicionals @@ -10303,12 +10345,12 @@ Additionally, pop-up notifications can be disabled. In this case the user can st Notifications List - Notifications List + Llista de notificacions Maximum notification count - Maximum notification count + Nombre màxim de notificacions @@ -10357,55 +10399,54 @@ Additionally, pop-up notifications can be disabled. In this case the user can st <html><head/><body><p>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select <span style=" font-weight:600; font-style:italic;">Sort alphabetically</span>. Additional workbenches can be installed through the addon manager.</p><p> Currently installed workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select <span style=" font-weight:600; font-style:italic;">Sort alphabetically</span>. Additional workbenches can be installed through the addon manager.</p><p> -Currently installed workbenches:</p></body></html> + <html><head/><body><p>Podeu reorganitzar els bancs de treball arrossegant-los i deixant-los anar o ordenant-los fent clic dret sobre qualsevol banc de treball i seleccionar <span style=" font-weight:600; font-style:italic;">Ordenar Alfabèticament</span>. Es poden afegir bancs addicionals mitjançant el manegador de complements (Addon).</p><p> +Actualment, es disposa dels bancs de treball següents:</p></body></html> Selectors - Selectors + Selectors Workbench selector items style - Workbench selector items style + Tipus del selector del banc de treball Customizes how the items are displayed - Customizes how the items are displayed + Personalitza com es mostren els elements Workbench selector type - Workbench selector type + Tipus del selector del banc de treball Choose the workbench selector widget type (restart required) - Choose the workbench selector widget type (restart required) + Escull el tipus de giny del selector del banc de treball (cal reiniciar) Startup - Startup + Arrencar Default workbench - Default workbench + Banc de treball per defecte Changes which workbench will be activated and shown after FreeCAD launches - Changes which workbench will be activated and shown -after FreeCAD launches + Canvia quin banc de treball s'activarà i es mostrarà després de l'inici de FreeCAD Remembers which workbench is active for each tab of the viewport - Remembers which workbench is active for each tab of the viewport + Recorda quin banc de treball està actiu per a cada pestanya de l'àrea de visualització @@ -10418,7 +10459,7 @@ after FreeCAD launches Choose Orientation - Choose Orientation + Escollir orientació @@ -11492,22 +11533,22 @@ de la consola Python al tauler de Vista d'informes Vertical angle - Vertical angle + Angle vertical Horizontal angle - Horizontal angle + Angle horitzontal Fill light - Fill light + Llum d'emplenament Ambient light - Ambient light + Llum ambient @@ -11550,12 +11591,12 @@ Si està desactivat, es mostrarà fent clic al ratolí. Overlay layout delay - Overlay layout delay + Retard del disseny de superposició Automatically passes mouse wheel events through the transparent areas of an overlay panel - Automatically passes mouse wheel events through the transparent areas of an overlay panel + Passa automàticament els esdeveniments de la roda del ratolí a través de les àrees transparents d'un panell superposat @@ -11744,7 +11785,7 @@ la regió no són opacs. Shows the property view, which displays the properties of the selected object. - Shows the property view, which displays the properties of the selected object. + Mostra la vista de propietats, que mostra les propietats de l'objecte seleccionat. @@ -11752,7 +11793,7 @@ la regió no són opacs. Toggle Freeze - Toggle Freeze + Congela la commutació @@ -11773,7 +11814,7 @@ la regió no són opacs. &Reload Stylesheet - &Reload Stylesheet + &Recarrega el full d'estils @@ -11786,7 +11827,7 @@ la regió no són opacs. Add Property - Add Property + Afegir Propietat @@ -11821,27 +11862,27 @@ la regió no són opacs. Add a Property to %1 - Add a Property to %1 + Afegeix una propietat a %1 Invalid group name - Invalid group name + El nom de grup no és vàlid Invalid type name - Invalid type name + El tipus de fitxer no és vàlid Invalid property name '%1' - Invalid property name '%1' + El nom de propietat '%1' no és vàlid Property '%1' already exists - Property '%1' already exists + La propietat '%1' ja existeix en @@ -12051,7 +12092,7 @@ la regió no són opacs. Automatically passes mouse wheel events through the transparent areas of an overlay panel - Automatically passes mouse wheel events through the transparent areas of an overlay panel + Passa automàticament els esdeveniments de la roda del ratolí a través de les àrees transparents d'un panell superposat @@ -13038,12 +13079,12 @@ Proceed? Make Link - Make Link + Crear enllaç A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. - A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. + Un enllaç és un objecte que fa referència o enllaça a un altre objecte del mateix document o d'un altre document. A diferència dels clons, els enllaços fan referència directament a la forma original, fent-los més eficients en la memòria, cosa que ajuda a crear muntatges complexos. @@ -13051,12 +13092,12 @@ Proceed? Make Sub-Link - Make Sub-Link + Crear un subenllaç Creates a sub-object or sub-element link - Creates a sub-object or sub-element link + Crea un enllaç d'un subobjecte o subelement @@ -13064,12 +13105,12 @@ Proceed? Replace With Link - Replace With Link + Substitueix amb un enllaç Replaces the selected objects with links - Replaces the selected objects with links + Substitueix els objectes seleccionats amb enllaços @@ -13077,12 +13118,12 @@ Proceed? Import Links - Import Links + Importa enllaços Imports selected external links - Imports selected external links + Importa els enllaços externs seleccionats @@ -13090,12 +13131,12 @@ Proceed? Import All Links - Import All Links + Importa tots els enllaços Imports all links of the active document - Imports all links of the active document + Importa tots els enllaços del document actiu @@ -13103,12 +13144,12 @@ Proceed? &Go to Linked Object - &Go to Linked Object + &Ves a l'objecte enllaçat Selects the linked object and switches to its original document - Selects the linked object and switches to its original document + Selecciona l'objecte enllaçat i canvia al seu document original @@ -13116,12 +13157,12 @@ Proceed? Go to &Deepest Linked Object - Go to &Deepest Linked Object + Ves a l’objecte enllaçat més profun&d Selects the deepest linked object and switches to its original document - Selects the deepest linked object and switches to its original document + Selecciona l'objecte enllaçat més profund i canvia al seu document original @@ -13129,12 +13170,12 @@ Proceed? Select &All Links - Select &All Links + Seleccion&a tots els enllaços Selects all links to the current selected object - Selects all links to the current selected object + Selecciona tots els enllaços a l'objecte seleccionat actualment @@ -13142,12 +13183,12 @@ Proceed? Link Actions - Link Actions + Enllaça accions Commands that operate on link objects - Commands that operate on link objects + Ordres que operen sobre objectes d'enllaç @@ -13155,12 +13196,12 @@ Proceed? Ma&cros - Ma&cros + Ma&cros Opens a dialog to execute a recorded macro - Opens a dialog to execute a recorded macro + Obri un quadre de diàleg per a executar una macro gravada @@ -13168,12 +13209,12 @@ Proceed? &Execute Macro - &Execute Macro + &Executa la macro Executes the macro in the editor - Executes the macro in the editor + Executa la macro en l'editor @@ -13181,12 +13222,12 @@ Proceed? &Attach to Remote Debugger - &Attach to Remote Debugger + &Adjunta al depurador remot Attaches to a remotely running debugger - Attaches to a remotely running debugger + Adjunta a un depurador en execució de forma remota @@ -13194,12 +13235,12 @@ Proceed? &Debug Macro - &Debug Macro + &Depura la macro Starts the debugging of macros - Starts the debugging of macros + Inicia la depuració de macros @@ -13207,12 +13248,12 @@ Proceed? &Stop Debugging - &Stop Debugging + &Atura la depuració Stops the debugging of macros - Stops the debugging of macros + Atura la depuració de macros @@ -13220,12 +13261,12 @@ Proceed? Step &Over - Step &Over + Pas per s&obre Steps to the next line in this file - Steps to the next line in this file + Salta a la següent línia d'aquest fitxer @@ -13233,12 +13274,12 @@ Proceed? Step &Into - Step &Into + Passa d&ins Steps to the next line executed - Steps to the next line executed + Salta a la següent línia executada @@ -13246,12 +13287,12 @@ Proceed? Toggle &Breakpoint - Toggle &Breakpoint + Co&mmuta el punt d'interrupció Adds or removes a breakpoint at this position - Adds or removes a breakpoint at this position + Afegeix o elimina un punt d'interrupció (breakpoint) en aquesta posició @@ -13259,7 +13300,7 @@ Proceed? Open Macro Folder - Open Macro Folder + Obre la carpeta de macros @@ -13303,7 +13344,7 @@ Proceed? Opens a dialog to edit the preferences - Opens a dialog to edit the preferences + Obri un quadre de diàleg per a editar les preferències @@ -13311,12 +13352,12 @@ Proceed? Cu&stomize… - Cu&stomize… + Per&sonalitza… Opens a dialog to edit toolbars, shortcuts, and macros - Opens a dialog to edit toolbars, shortcuts, and macros + Obre un diàleg per editar barres d'eines, dreceres i macros @@ -13324,12 +13365,12 @@ Proceed? Command &Line - Command &Line + &Línia d’ordres Opens a command line interface in the console - Opens a command line interface in the console + Obre una interfície de línia d'ordres a la consola @@ -13337,12 +13378,12 @@ Proceed? Donate to FreeCA&D - Donate to FreeCA&D + Dona a FreeCA&D Support the FreeCAD development - Support the FreeCAD development + Contribueix al desenvolupament de FreeCAD @@ -13350,12 +13391,12 @@ Proceed? Developers Handbook - Developers Handbook + Manual per a desenvolupadors Handbook about FreeCAD development - Handbook about FreeCAD development + Manual sobre el desenvolupament de FreeCAD @@ -13363,12 +13404,12 @@ Proceed? Te&xt Document - Te&xt Document + Document de te&xt Adds a text document to the active document - Adds a text document to the active document + Afegeix un document de text al document actiu @@ -13376,12 +13417,12 @@ Proceed? &Units Converter - &Units Converter + &Convertidor d'unitats Starts the units converter - Starts the units converter + Inicia el convertidor d'unitats @@ -13389,12 +13430,12 @@ Proceed? Edit &Mode - Edit &Mode + &Mode d'edició Defines behavior when editing an object from the tree view - Defines behavior when editing an object from the tree view + Defineix el comportament en editar un objecte de l'arbre @@ -13407,7 +13448,7 @@ Proceed? Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. - Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. + Crea una peça, que és un contenidor d'ús general per agrupar objectes perquè actuïn com una unitat a la vista 3D. Està pensat per organitzar objectes que tenen una peça TopoShape, com ara primitives de peça, cossos de Part Design i altres peces. @@ -13428,7 +13469,7 @@ Proceed? Variable Set - Variable Set + Conjunt de Variables @@ -13649,7 +13690,7 @@ Proceed? Standard &Views - Standard &Views + &Vistes estàndard @@ -13667,7 +13708,7 @@ Proceed? Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Mostra la vista activa en pantalla completa, en mode desacoblat o acoblat @@ -13766,12 +13807,12 @@ Proceed? Issue Camera &Position - Issue Camera &Position + &Publica la posició de la càmera Issues the camera position to the console and to a macro, to easily recall this position - Issues the camera position to the console and to a macro, to easily recall this position + Publica la posició de la càmera en la consola i en una macro per tornar a cridar fàcilment aquesta posició @@ -13779,12 +13820,12 @@ Proceed? &Box Zoom - &Box Zoom + &Caixa de zoom Activates the box zoom tool - Activates the box zoom tool + Activa l'eina de la caixa de zoom @@ -13792,12 +13833,12 @@ Proceed? &Box Selection - &Box Selection + &Quadre de selecció Activates the box selection tool - Activates the box selection tool + Activa l'eina de selecció de quadres @@ -13805,12 +13846,12 @@ Proceed? Bo&x Element Selection - Bo&x Element Selection + Selecció d'elements de cai&xa Activates box element selection - Activates box element selection + Activa la selecció d'elements de la caixa @@ -13818,12 +13859,12 @@ Proceed? &Go to Selection - &Go to Selection + &Anar a la selecció Scrolls to the first selected item - Scrolls to the first selected item + Desplaça fins al primer element seleccionat @@ -13831,12 +13872,12 @@ Proceed? Collapse Selected Items - Collapse Selected Items + Contrau els elements seleccionats Collapses the currently selected tree items - Collapses the currently selected tree items + Contrau els elements d'arbre seleccionats actualment @@ -13844,12 +13885,12 @@ Proceed? Expand Selected Items - Expand Selected Items + Expandeix els elements seleccionats Expands the currently selected tree items - Expands the currently selected tree items + Expandeix els elements d'arbre seleccionats actualment @@ -13857,12 +13898,12 @@ Proceed? Select All Instances - Select All Instances + Selecciona totes les instàncies Selects all instances of the currently selected object - Selects all instances of the currently selected object + Selecciona totes les instàncies de l'objecte seleccionat actualment @@ -13870,12 +13911,12 @@ Proceed? Scene I&nspector - Scene I&nspector + I&nspector d'escena Opens the scene inspector - Opens the scene inspector + Obre l'inspector d'escenes @@ -13883,12 +13924,12 @@ Proceed? Text&ure Mapping - Text&ure Mapping + Mapatge de text&ura Maps textures to shapes - Maps textures to shapes + Mapa textures a formes @@ -13896,12 +13937,12 @@ Proceed? View &Turntable - View &Turntable + Visualitza la plataforma gira&tòria Opens a turntable view - Opens a turntable view + Obre una vista de plataforma giratòria @@ -13909,12 +13950,12 @@ Proceed? Selection &Back - Selection &Back + Selecció prèvia Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. - Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. + Restaura la selecció anterior de vista d'arbre. Només funciona si el mode Tree RecordSelection està activat. @@ -13922,7 +13963,7 @@ Proceed? Selection &Forward - Selection &Forward + Selecció e&ndavant diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index 9123428342..e6261ece51 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Přejmenovat - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ současně. Spustí se ten s nejvyšší prioritou. Gui::Dialog::DlgCustomToolbars - + Toolbars Panely nástrojů - + Category Kategorie - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Nový - + Rename Přejmenovat - + Delete Odstranit - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Pozn.:</span> Změny budou aktivní po restartu příslušného pracovního prostředí</p></body></html> @@ -6068,12 +6068,12 @@ Save all changes? Makra - + Macro file doesn't exist Soubor makra neexistuje - + No such macro file: '%1' Není soubor makra: '%1' @@ -6429,72 +6429,72 @@ V pravém pohledu jsou %2 body vybrány. Gui::PropertyEditor::PropertyEditor - + Edit Upravit - + property vlastnost - + Copy Kopírovat - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Výraz - + Property name Property name - + Rename property group Přejmenovat skupinu vlastností - + Group name: Jméno skupiny: @@ -7842,17 +7842,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Neplatná verze OpenGL - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Výjimka @@ -8440,12 +8489,12 @@ Zvolte 'Přerušit' pro zrušení Nelze otevřít systémový prohlížeč. - + Out of memory Nedostatek paměti - + Not enough memory available to display the data. Není dostatek paměti pro zobrazení dat. @@ -8461,7 +8510,7 @@ Zvolte 'Přerušit' pro zrušení Nelze najít soubor %1 %2 ani v %3 - + Navigation styles Styly navigace @@ -8511,11 +8560,6 @@ Zvolte 'Přerušit' pro zrušení Not allowed to delete system-wide macros Není povoleno mazat systémová makra - - - Origin - Počátek - Delete group content? diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index d4d175de85..419a78faf0 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -169,12 +169,12 @@ Toggle Transparency - Toggle Transparency + Transparenz umschalten Toggle Selectability - Toggle Selectability + Auswählbarkeit umschalten @@ -270,7 +270,7 @@ Global sensitivity - Global sensitivity + Globale Empfindlichkeit: @@ -280,12 +280,12 @@ Enable translations - Enable translations + Übersetzungen aktivieren Enable rotations - Enable rotations + Drehungen aktivieren @@ -417,7 +417,7 @@ Enter expression… (=) - Enter expression… (=) + Ausdruck eingeben… (=) @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Umbenennen - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -730,7 +730,7 @@ while doing a left or right click and move the mouse up or down Camera Settings - Camera Settings + Kameraeinstellungen @@ -760,7 +760,7 @@ while doing a left or right click and move the mouse up or down Current View - Current View + Aktuelle Ansicht @@ -918,7 +918,7 @@ while doing a left or right click and move the mouse up or down Add Property - Add Property + Eigenschaft hinzufügen @@ -1025,7 +1025,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Icon Folders - Icon Folders + Symbolordner @@ -1089,7 +1089,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Menu text - Menu text + Menütext @@ -1099,7 +1099,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Status text - Status text + Statustext @@ -1229,7 +1229,7 @@ same time. The one with the highest priority will be triggered. &Category - &Category + &Kategorie @@ -1306,7 +1306,7 @@ same time. The one with the highest priority will be triggered. Type to search… - Type to search… + Zum Suchen tippen… @@ -1347,72 +1347,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Symbolleisten - + Category Kategorie - + Move Right - Move Right + Nach rechts verschieben - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Nach oben verschieben - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Nach unten verschieben - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Neu - + Rename Umbenennen - + Delete Löschen - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hinweis:</span> Die Änderungen werden beim nächsten Laden des passenden Arbeitsbereiches aktiviert</p></body></html> @@ -1579,7 +1579,7 @@ same time. The one with the highest priority will be triggered. Execute Macro - Execute Macro + Makro ausführen @@ -1649,7 +1649,7 @@ same time. The one with the highest priority will be triggered. Opens the Addon Manager to download macros created by the community - Opens the Addon Manager to download macros created by the community + Öffnet den Addon-Manager, um von der Gemeinschaft erstellte Makros herunterzuladen @@ -1773,7 +1773,7 @@ Hinweis: Die Änderungen werden beim nächsten Wechsel im Arbeitsbereich wirksam Enter a file name: - Enter a file name: + Dateinamen eingeben: @@ -1799,7 +1799,7 @@ Hinweis: Die Änderungen werden beim nächsten Wechsel im Arbeitsbereich wirksam Enter new name - Enter new name + Neuen Namen eingeben @@ -1842,22 +1842,22 @@ Perhaps a file permission error? Record Macro - Record Macro + Makro aufzeichnen Macro Name - Macro Name + Makroname Macro Path - Macro Path + Makropfad Choose Folder - Choose Folder + Ordner auswählen @@ -2158,7 +2158,7 @@ Specify another directory. Search group - Search group + Gruppe suchen @@ -2181,7 +2181,7 @@ Specify another directory. Open Addon Manager - Open Addon Manager + Addon-Manager öffnen @@ -2269,7 +2269,7 @@ Specify another directory. Reset All - Reset All + Alle zurücksetzen @@ -2289,7 +2289,7 @@ Specify another directory. Restart Required - Restart Required + Neustart erforderlich @@ -2299,12 +2299,12 @@ Specify another directory. Restart Now - Restart Now + Jetzt neu starten Restart Later - Restart Later + Später neu starten @@ -2327,7 +2327,7 @@ Specify another directory. Document Information - Document Information + Dokumentinformationen @@ -2337,7 +2337,7 @@ Specify another directory. &Name - &Name + &Name @@ -2352,27 +2352,27 @@ Specify another directory. Program version - Program version + Programmversion Unit system - Unit system + Einheitensystem Created &by - Created &by + Erstellt &von Creation &date - Creation &date + Erstellungs&datum &Last modified by - &Last modified by + &Zuletzt geändert von @@ -2382,7 +2382,7 @@ Specify another directory. Com&pany - Com&pany + &Unternehmen @@ -2558,7 +2558,7 @@ Specify another directory. WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. - WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. + WARNUNG: Dieser Vorgang macht alle seit dem angegebenen Datum erfolgten Änderungen der Einstellungen rückgängig und setzt auch die aktuellen Dateien und Makros auf ihren Zustand an diesem Datum zurück. @@ -2869,7 +2869,7 @@ Der angegebene Wert ist ein Faktor, der mit der Größe des Begrenzungsrahmens d Camera Type - Camera Type + Kameratyp @@ -3019,7 +3019,7 @@ Der angegebene Wert ist ein Faktor, der mit der Größe des Begrenzungsrahmens d Check Now - Check Now + Jetzt prüfen @@ -3047,12 +3047,12 @@ Der angegebene Wert ist ein Faktor, der mit der Größe des Begrenzungsrahmens d Color Model - Color Model + Farbmodell &Gradient - &Gradient + &Gradient @@ -3156,7 +3156,7 @@ werden transparent angezeigt Ma&ximum - Ma&ximum + Ma&ximum @@ -3166,7 +3166,7 @@ werden transparent angezeigt Mi&nimum - Mi&nimum + Mi&nimum @@ -3373,7 +3373,7 @@ erhalten Datumssuffix im angegebenen Format Document Objects - Document Objects + Dokumentobjekte @@ -3576,32 +3576,32 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Image Settings - Image Settings + Bildeinstellungen Image Dimensions - Image Dimensions + Bildabmessungen Standard sizes - Standard sizes + Standardgrößen &Width - &Width + &Breite &Height - &Height + &Höhe Aspect ratio - Aspect ratio + Seitenverhältnis @@ -3646,22 +3646,22 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Image Properties - Image Properties + Bildeigenschaften Back&ground - Back&ground + Hinter&grund Creation method - Creation method + Erstellungsmethode Image Comment - Image Comment + Bildkommentar @@ -3752,12 +3752,12 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Macro Recording Settings - Macro Recording Settings + Einstellungen für das Aufzeichnen von Makros Macro Path - Macro Path + Makropfad @@ -3767,7 +3767,7 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Recorded macros will also contain user interface commands - Aufgenommene Makros enthalten auch Benutzeroberflächenbefehle + Aufgezeichnete Makros enthalten auch Befehle der Benutzeroberfläche @@ -3777,7 +3777,7 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Recorded macros will also contain user interface commands as comments - Aufgenommene Makros enthalten auch Benutzeroberflächenbefehle als Kommentare + Aufgezeichnete Makros enthalten auch Befehle der Benutzeroberfläche als Kommentare @@ -3807,7 +3807,7 @@ Es kann auch diese Form verwendet werden: Max Mustermann <max@mustermann.de&g Recent Macros Menu - Recent Macros Menu + Liste der aktuellen Makros @@ -4575,12 +4575,12 @@ Ein größerer Wert erleichtert die Auswahl von Elementen, verhindert aber die A Units Converter - Units Converter + Einheitenumrechner as - as + als @@ -4613,7 +4613,7 @@ Um eine Berechnung hinzuzufügen, die Eingabetaste im Werteingabefeld drücken Unit system - Unit system + Einheitensystem @@ -4896,7 +4896,7 @@ Die Spalte "Status" zeigt an, ob das Dokument wiederhergestellt werden konnte. Icon Folders - Icon Folders + Symbolordner @@ -5011,12 +5011,12 @@ Die Spalte "Status" zeigt an, ob das Dokument wiederhergestellt werden konnte. Remove Group - Remove Group + Gruppe entfernen Rename Group - Rename Group + Gruppe umbenennen @@ -5221,23 +5221,23 @@ Die Spalte "Status" zeigt an, ob das Dokument wiederhergestellt werden konnte. Yaw (around Z-axis) - Yaw (around Z-axis) + Gieren (um die Z-Achse) Pitch (around Y-axis) - Pitch (around Y-axis) + Nicken (um die Y-Achse) Roll (around X-axis) - Roll (around X-axis) + Rollen (um die X-Achse) Roll (around the X-axis) - Roll (around the X-axis) + Rollen (um die X-Achse) @@ -5283,7 +5283,7 @@ Die Spalte "Status" zeigt an, ob das Dokument wiederhergestellt werden konnte. Attach to Remote Debugger - Attach to Remote Debugger + Mit Remote-Debugger verbinden @@ -5347,7 +5347,7 @@ Die Spalte "Status" zeigt an, ob das Dokument wiederhergestellt werden konnte. Texture Mapping - Texture Mapping + Texturabbildung @@ -5521,7 +5521,7 @@ originally selected prior to opening this dialog Save As… - Save As… + Speichern unter… @@ -5573,7 +5573,7 @@ originally selected prior to opening this dialog Python Console - Python Console + Python-Konsole @@ -5636,7 +5636,7 @@ originally selected prior to opening this dialog To Python Console - To Python Console + Zur Python-Konsole @@ -5717,8 +5717,8 @@ This has been modified outside of the source editor. Reload it? The document has been modified. Save all changes? - The document has been modified. -Save all changes? + Das Dokument wurde geändert. +Alle Änderungen speichern? @@ -5766,7 +5766,7 @@ Save all changes? Save As - Save As + Speichern unter @@ -6063,12 +6063,12 @@ Save all changes? Makros - + Macro file doesn't exist Makro-Datei existiert nicht - + No such macro file: '%1' Keine solche Makrodatei: "%1" @@ -6421,72 +6421,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Bearbeiten - + property Eigenschaft - + Copy Kopieren - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Eigenschaft umbenennen - + Delete Property Eigenschaft löschen - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Ausdruck - + Property name Property name - + Rename property group Eigenschaften-Gruppe umbenennen - + Group name: Gruppenname: @@ -6544,7 +6544,7 @@ Exit without saving all data? Python Console - Python Console + Python-Konsole @@ -6871,7 +6871,7 @@ Specify another directory? Document window - Document window + Dokumentfenster @@ -7707,7 +7707,7 @@ Specify another directory? Python Console - Python Console + Python-Konsole @@ -7834,17 +7834,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Ungültige OpenGL-Version - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Ausnahme @@ -8030,7 +8079,7 @@ Continue? Save Image - Save Image + Bild speichern @@ -8289,12 +8338,12 @@ Die Datei unter einem anderen Namen speichern? Save document under new filename… - Save document under new filename… + Dokument unter neuem Dateinamen speichern… Save a copy of the document under new filename… - Save a copy of the document under new filename… + Speichert eine Kopie des Dokuments unter einem neuen Dateinamen… @@ -8432,12 +8481,12 @@ Choose 'Abort' to abort Kann Systembrowser nicht starten. - + Out of memory Nicht genügend Speicher - + Not enough memory available to display the data. Nicht genügend Speicher verfügbar, um die Daten darstellen zu können. @@ -8453,7 +8502,7 @@ Choose 'Abort' to abort Kann Datei %1 weder in %2 noch in %3 finden - + Navigation styles Navigationsstile @@ -8503,11 +8552,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Keine Berechtigung die systemweiten Makros zu löschen - - - Origin - Ursprung - Delete group content? @@ -9081,12 +9125,12 @@ the current copy will be lost. Record &Macro - Record &Macro + &Makro aufzeichnen Opens a dialog to record a macro - Öffnet einen Dialog zur Makroaufzeichnung + Öffnet einen Dialog zum Aufzeichnen eines Makros @@ -9104,7 +9148,7 @@ the current copy will be lost. &Panels - &Paneele + Fenster @@ -9117,7 +9161,7 @@ the current copy will be lost. Toggle &Edit Mode - Toggle &Edit Mode + B%earbeitungsmodus umschalten @@ -9130,7 +9174,7 @@ the current copy will be lost. &Export… - &Export… + &Exportieren… @@ -9145,7 +9189,7 @@ the current copy will be lost. Select objects to export before using the Export command. - Select objects to export before using the Export command. + Objekte zum Exportieren auswählen, bevor der Export-Befehl verwendet wird. @@ -9205,12 +9249,12 @@ the current copy will be lost. &Import… - &Import… + &Importieren… Imports a file into the active document - Imports a file into the active document + Importiert eine Datei in das aktive Dokument @@ -9228,7 +9272,7 @@ the current copy will be lost. &Link Navigation - &Link Navigation + &Verknüpfungsnavigation @@ -9254,12 +9298,12 @@ the current copy will be lost. &Merge Document - &Merge Document + &Dokument zusammenführen Merges another FreeCAD document into the active one - Merges another FreeCAD document into the active one + Führt ein weiteres FreeCAD-Dokument mit dem aktiven Dokument zusammen @@ -9289,12 +9333,12 @@ the current copy will be lost. &New Document - &New Document + &Neues Dokument Creates a new empty document - Creates a new empty document + Erstellt ein neues leeres Dokument @@ -9315,12 +9359,12 @@ the current copy will be lost. &Open… - &Open… + &Öffnen… Opens a document or imports files - Opens a document or imports files + Öffnet ein Dokument oder importiert Dateien @@ -9379,7 +9423,7 @@ the current copy will be lost. Displays the list of recently opened files - Displays the list of recently opened files + Zeigt die Liste der zuletzt geöffneten Dateien an @@ -9431,7 +9475,7 @@ the current copy will be lost. Saves all open documents - Saves all open documents + Speichert alle geöffneten Dokumente @@ -9465,7 +9509,7 @@ the current copy will be lost. Status Bar - Status Bar + Statusleiste @@ -9613,7 +9657,7 @@ the current copy will be lost. Switches stereo viewing to interleaved columns - Switches stereo viewing to interleaved columns + Wechselt die Stereo-Ansicht auf interleaved colums (vertikale Halbbilder) @@ -9626,7 +9670,7 @@ the current copy will be lost. Switches stereo viewing to interleaved rows - Switches stereo viewing to interleaved rows + Wechselt die Stereo-Ansicht auf interleaved rows (horizontale Halbbilder) @@ -9639,7 +9683,7 @@ the current copy will be lost. Switches stereo viewing off - Switches stereo viewing off + Schaltet die Stereo-Ansicht aus @@ -9730,7 +9774,7 @@ the current copy will be lost. Opens the documentation for the selected command - Opens the documentation for the selected command + Öffnet die Dokumentation für den ausgewählten Befehl @@ -9777,7 +9821,7 @@ the current copy will be lost. Orthographic View - Orthographic View + Orthogonale Ansicht @@ -9790,7 +9834,7 @@ the current copy will be lost. Perspective View - Perspective View + Perspektivische Ansicht @@ -9855,7 +9899,7 @@ the current copy will be lost. Save &Image… - Save &Image… + B&ild speichern… @@ -10095,7 +10139,7 @@ Save the document now? Standard &Views - Standard &Views + Standardansichten @@ -10722,7 +10766,7 @@ after FreeCAD launches &Load Image… - &Load Image… + Bild &laden… @@ -11169,12 +11213,12 @@ display the splash screen. Activate overlay handling of docked panels - Activate overlay handling of docked panels + Aktiviert den Überlagerungsmodus für angedockte Fenster Activate overlay panels - Activate overlay panels + Überlagerungsfenster aktivieren @@ -11772,7 +11816,7 @@ der Region nicht transparent sind. Toggle Freeze - Toggle Freeze + Einfrieren umschalten @@ -12120,12 +12164,12 @@ der Region nicht transparent sind. Python &Modules Documentation - Python &Modules Documentation + Dokumentation der Python-&Module Opens the Python Modules documentation - Öffnet die Python-Modul-Dokumentation + Öffnet die Dokumentation der Python-Module @@ -12364,7 +12408,7 @@ der Region nicht transparent sind. This is the PDF Version FreeCAD will use to export to PDF - This is the PDF Version FreeCAD will use to export to PDF + Dies ist die PDF-Version, die FreeCAD zum Exportieren in eine PDF-Datei verwendet @@ -12802,7 +12846,7 @@ der Region nicht transparent sind. Shows the dependency graph of the objects in the active document - Shows the dependency graph of the objects in the active document + Zeigt das Abhängigkeitsdiagramm der Objekte im aktiven Dokument an @@ -12810,7 +12854,7 @@ der Region nicht transparent sind. Dependency Graph - Dependency Graph + Abhängigkeitsdiagramm @@ -12818,12 +12862,12 @@ der Region nicht transparent sind. Export Dependency &Graph - Export Dependency &Graph + Abhängigkeitsdia&gramm exportieren Exports the dependency graph as a Graphviz (.gv) file - Exports the dependency graph as a Graphviz (.gv) file + Exportiert das Abhängigkeitsdiagramm als Graphviz-Datei (.gv-Datei) @@ -12831,12 +12875,12 @@ der Region nicht transparent sind. Save &As… - Save &As… + Speichern unter… Saves the active document under a new file name - Saves the active document under a new file name + Speichert das aktive Dokument unter einem neuen Dateinamen @@ -12849,7 +12893,7 @@ der Region nicht transparent sind. Saves a copy of the active document under a new file name - Saves a copy of the active document under a new file name + Speichert eine Kopie des aktiven Dokuments unter einem neuen Dateinamen @@ -12880,7 +12924,7 @@ der Region nicht transparent sind. Shows information about the active document - Shows information about the active document + Zeigt Informationen zu dem aktiven Dokument an @@ -12901,12 +12945,12 @@ der Region nicht transparent sind. &Print - &Print + &Drucken Prints the active document - Prints the active document + Druckt das aktive Dokument @@ -12914,12 +12958,12 @@ der Region nicht transparent sind. Print Previe&w - Print Previe&w + Druckvorscha&u Previews the active document before printing - Previews the active document before printing + Zeigt vor dem Drucken eine Vorschau des aktiven Dokuments @@ -12927,12 +12971,12 @@ der Region nicht transparent sind. Export P&DF - Export P&DF + P&DF exportieren Exports the active document as a PDF file - Exports the active document as a PDF file + Exportiert das aktive Dokument als PDF-Datei @@ -13019,12 +13063,12 @@ Proceed? Random &Color - Random &Color + Zufällige Farbe Assigns random diffuse colors for the selected objects - Assigns random diffuse colors for the selected objects + Weist ausgewählten Objekten zufällige Streufarben zu @@ -13097,12 +13141,12 @@ Proceed? Import Links - Import Links + Verknüpfungen importieren Imports selected external links - Imports selected external links + Importiert ausgewählte externe Verknüpfungen @@ -13110,12 +13154,12 @@ Proceed? Import All Links - Import All Links + Alle Verknüpfungen importieren Imports all links of the active document - Imports all links of the active document + Importiert alle Verknüpfungen des aktiven Dokuments @@ -13180,7 +13224,7 @@ Proceed? Opens a dialog to execute a recorded macro - Opens a dialog to execute a recorded macro + Öffnet einen Dialog zum Ausführen eines aufgezeichneten Makros @@ -13188,12 +13232,12 @@ Proceed? &Execute Macro - &Execute Macro + Makro ausführ&en Executes the macro in the editor - Executes the macro in the editor + Führt das im Editor befindliche Makro aus @@ -13201,12 +13245,12 @@ Proceed? &Attach to Remote Debugger - &Attach to Remote Debugger + Mit Remote-Debugger verbinden Attaches to a remotely running debugger - Attaches to a remotely running debugger + Verbindet mit einem entfernt laufenden Debugger @@ -13214,12 +13258,12 @@ Proceed? &Debug Macro - &Debug Macro + Makrofehler bereinigen Starts the debugging of macros - Starts the debugging of macros + Startet die Fehlerbereinigung der Makros @@ -13227,12 +13271,12 @@ Proceed? &Stop Debugging - &Stop Debugging + Fehlerbereinigung anhalten Stops the debugging of macros - Stops the debugging of macros + Hält die Fehlerbereinigung der Makros an @@ -13292,12 +13336,12 @@ Proceed? &Recent Macros - &Recent Macros + Aktuelle Mak&ros Displays the list of recently used macros - Displays the list of recently used macros + Zeigt die Liste der zuletzt verwendeten Makros an @@ -13310,7 +13354,7 @@ Proceed? Opens a dialog to edit the parameters - Opens a dialog to edit the parameters + Öffnet einen Dialog zum Bearbeiten der Parameter @@ -13357,7 +13401,7 @@ Proceed? Donate to FreeCA&D - Donate to FreeCA&D + An FreeCA&D spenden @@ -13370,7 +13414,7 @@ Proceed? Developers Handbook - Developers Handbook + Entwicklerhandbuch @@ -13388,7 +13432,7 @@ Proceed? Adds a text document to the active document - Adds a text document to the active document + Fügt dem aktiven Dokument ein Textdokument hinzu @@ -13396,12 +13440,12 @@ Proceed? &Units Converter - &Units Converter + Einheiten&umrechner Starts the units converter - Starts the units converter + Startet den Einheitenumrechner @@ -13409,7 +13453,7 @@ Proceed? Edit &Mode - Edit &Mode + Bearbeitungs&modus @@ -13500,12 +13544,12 @@ Proceed? &Draw Style - &Draw Style + &Darstellungsart Changes the draw style of the objects - Changes the draw style of the objects + Ändert die Darstellungsart von Objekten @@ -13526,7 +13570,7 @@ Proceed? Toggle Transparenc&y - Toggle Transparenc&y + Transparenz umschalten @@ -13669,12 +13713,12 @@ Proceed? Standard &Views - Standard &Views + Standardansichten Changes to a standard view - Changes to a standard view + Wechselt zu einer Standardansicht @@ -13721,12 +13765,12 @@ Proceed? Toggle Navigation/&Edit Mode - Toggle Navigation/&Edit Mode + Navigations-/B&earbeitungsmodus wechseln Toggles between navigation and edit mode - Toggles between navigation and edit mode + Wechselt zwischen Navigations- und Bearbeitungsmodus @@ -13739,7 +13783,7 @@ Proceed? Toggles the axis cross at the origin - Toggles the axis cross at the origin + Schaltet das Achsenkreuz im Ursprung ein bzw. aus @@ -13765,7 +13809,7 @@ Proceed? Switches stereo viewing to red/cyan - Switches stereo viewing to red/cyan + Wechselt die Stereo-Ansicht auf rot/cyan @@ -13778,7 +13822,7 @@ Proceed? Switches stereo viewing to quad buffer - Switches stereo viewing to quad buffer + Wechselt die Stereo-Ansicht auf Vierfachpuffer @@ -13812,12 +13856,12 @@ Proceed? &Box Selection - &Box Selection + &Rechteckauswahl Activates the box selection tool - Activates the box selection tool + Aktiviert das Rechteckauswahlwerkzeug @@ -13830,7 +13874,7 @@ Proceed? Activates box element selection - Activates box element selection + Aktiviert die Rechteckauswahl für Elemente @@ -13895,7 +13939,7 @@ Proceed? Opens the scene inspector - Opens the scene inspector + Öffnet den Szeneninspektor @@ -13916,12 +13960,12 @@ Proceed? View &Turntable - View &Turntable + Drehscheibe anzeigen Opens a turntable view - Opens a turntable view + Öffnet eine Drehscheibenansicht @@ -14046,7 +14090,7 @@ Proceed? Tree View Actions - Tree View Actions + Baumansicht-Aktionen @@ -14077,7 +14121,7 @@ Proceed? Toggled overlay mode for all docked panels - Toggled overlay mode for all docked panels + Schaltet den Überlagerungsmodus für alle angedockten Fenster um @@ -14091,8 +14135,8 @@ Proceed? Toggles transparent mode for all docked overlay panels. This makes the docked panels stay transparent at all times. - Toggles transparent mode for all docked overlay panels. -This makes the docked panels stay transparent at all times. + Schaltet den Transparenzmodus für alle angedockten Fenster im Überlagerungsmodus um. +Dadurch bleiben die angedockten Fenster jederzeit transparent. @@ -14105,7 +14149,7 @@ This makes the docked panels stay transparent at all times. Toggles overlay mode for the docked window under the cursor - Toggles overlay mode for the docked window under the cursor + Schaltet den Überlagerungsmodus für das angedockte Fenster unter dem Mauszeiger um @@ -14185,7 +14229,7 @@ This makes the docked panel stay transparent at all times. Bypasses all mouse events in docked overlay panels - Bypasses all mouse events in docked overlay panels + Lenkt alle Mausereignisse in angedockten Fenstern im Überlagerungsmodus um @@ -14193,12 +14237,12 @@ This makes the docked panel stay transparent at all times. Overlay Docked Panel - Overlay Docked Panel + Überlagerungsmodus angedockter Fenster Sets the docked panel in overlay mode - Sets the docked panel in overlay mode + Versetzt das angedockte Fenster in den Überlagerungsmodus @@ -14245,7 +14289,7 @@ This makes the docked panel stay transparent at all times. Choose Open &Window - Choose Open &Window + Zu öffnendes Fenster auswählen @@ -14356,38 +14400,38 @@ This makes the docked panel stay transparent at all times. Invalid property name: %1 - Invalid property name: %1 + Ungültiger Eigenschaftsname: %1 Unknown object - Unknown object + Unbekanntes Objekt the name cannot be empty - the name cannot be empty + der Name darf nicht leer sein %1 is a unit - %1 is a unit + %1 ist eine Einheit %1 is a constant - %1 is a constant + %1 ist eine Konstante %1 already exists - %1 already exists + %1 existiert bereits Invalid group name: %1 - Invalid group name: %1 + Ungültiger Gruppenname: %1 @@ -14421,7 +14465,7 @@ This makes the docked panel stay transparent at all times. All Theme Editor Parameters - All Theme Editor Parameters + Alle Theme-Editor-Parameter @@ -14507,12 +14551,12 @@ This makes the docked panel stay transparent at all times. Value out of range (%1 out of [%2, %3]) - Value out of range (%1 out of [%2, %3]) + Wert außerhalb des Bereichs (%1 außerhalb von [%2, %3]) Not a number - Not a number + Keine Zahl diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index 80470ff0c2..095a41243a 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Μετονομασία - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1347,72 +1347,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Γραμμές εργαλείων - + Category Κατηγορία - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Νέο - + Rename Μετονομασία - + Delete Διαγραφή - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Σημείωση:</span> Οι αλλαγές ενεργοποιούνται την επόμενη φορά που θα φορτώσετε τον κατάλληλο πάγκο εργασίας</p></body></html> @@ -6064,12 +6064,12 @@ Save all changes? Μακροεντολές - + Macro file doesn't exist Το αρχείο μακροεντολής δεν υπάρχει - + No such macro file: '%1' Δεν υπάρχει τέτοιο αρχείο μακροεντολής: '%1' @@ -6423,72 +6423,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Επεξεργασία - + property ιδιότητα - + Copy Αντιγραφή - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Rename property group - + Group name: Group name: @@ -7836,17 +7836,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Εξαίρεση @@ -8434,12 +8483,12 @@ Choose 'Abort' to abort Αδυναμία ανοίγματος του πλοηγού διαδικτύου του συστήματός σου. - + Out of memory Μνήμη πλήρης - + Not enough memory available to display the data. Δεν υπάρχει αρκετή μνήμη διαθέσιμη για την προβολή των δεδομένων. @@ -8455,7 +8504,7 @@ Choose 'Abort' to abort Αδυναμία εύρεσης του αρχείου %1 τόσο στο %2 όσο και στο %3 - + Navigation styles Τύποι μορφοποίησης πλοήγησης @@ -8505,11 +8554,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Δεν επιτρέπεται να διαγράψετε μακροεντολές συστήματος - - - Origin - Σημείο Τομής Αξόνων - Delete group content? diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index efbb692327..48976a22b0 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Renombrar - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Barras de herramientas - + Category Categoría - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Nuevo - + Rename Renombrar - + Delete Borrar - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> Los cambios se activarán la próxima vez que cargue el entorno apropiado</p></body></html> @@ -6067,12 +6067,12 @@ Save all changes? Macros - + Macro file doesn't exist No existe el archivo de la macro - + No such macro file: '%1' No hay tal archivo macro: '%1' @@ -6423,72 +6423,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Editar - + property propiedad - + Copy Copiar - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expresión - + Property name Property name - + Rename property group Renombrar grupo de propiedades - + Group name: Nombre del grupo: @@ -7836,17 +7836,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Versión OpenGL inválida - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Excepción @@ -8434,12 +8483,12 @@ Seleccione 'Abortar' para abortar Incapaz de abrir su navegador del sistema. - + Out of memory Memoria insuficiente - + Not enough memory available to display the data. Insuficiente memoria disponible para mostrar los datos. @@ -8455,7 +8504,7 @@ Seleccione 'Abortar' para abortar No se pueden encontrar los archivos %1 ni %2 ni %3 - + Navigation styles Estilos de navegación @@ -8505,11 +8554,6 @@ Seleccione 'Abortar' para abortar Not allowed to delete system-wide macros No se permite eliminar macros del sistema - - - Origin - Origen de coordenadas - Delete group content? diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index ab17b941fb..731842293d 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Aldatu izena - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Tresna-barrak - + Category Kategoria - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Berria - + Rename Aldatu izena - + Delete Ezabatu - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Oharra:</span> Lan-mahai egokia kargatzerakoan gaituko dira aldaketak</p></body></html> @@ -6070,12 +6070,12 @@ Save all changes? Makroak - + Macro file doesn't exist Makro-fitxategia ez da existitzen - + No such macro file: '%1' Ez dago makro fitxategi hori: '%1' @@ -6429,72 +6429,72 @@ Nola jarraitu nahi duzu? Gui::PropertyEditor::PropertyEditor - + Edit Editatu - + property propietatea - + Copy Kopiatu - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Adierazpena - + Property name Property name - + Rename property group Aldatu propietate-taldearen izena - + Group name: Taldearen izena: @@ -7842,17 +7842,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version OpenGL bertsio baliogabea - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Salbuespena @@ -8440,12 +8489,12 @@ Aukeratu 'Abortatu' abortatzeko. Ezin izan da zure sistemaren nabigatzailea ireki. - + Out of memory Memoria gutxiegi - + Not enough memory available to display the data. Ez dago nahiko memoriarik datuak bistaratzeko. @@ -8461,7 +8510,7 @@ Aukeratu 'Abortatu' abortatzeko. Ez da %1 fitxategia aurkitu ez %2 ez %3 tokietan - + Navigation styles Nabigazio-estiloak @@ -8511,11 +8560,6 @@ Aukeratu 'Abortatu' abortatzeko. Not allowed to delete system-wide macros Ezin dira ezabatu sistemako makroak - - - Origin - Jatorria - Delete group content? diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 746b0cf985..71d9f0e5bb 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Nimeä uudelleen - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ oleva käynnistetään. Gui::Dialog::DlgCustomToolbars - + Toolbars Työkalurivit - + Category Kategoria - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Uusi - + Rename Nimeä uudelleen - + Delete Poista - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Huomautus:</span> Muutokset aktivoituvat, kun lataat työpöydän</p></body></html> @@ -6071,12 +6071,12 @@ Save all changes? Makrot - + Macro file doesn't exist Makrotiedostoa ei ole olemassa - + No such macro file: '%1' Ei sellaista makrotiedostoa: '%1' @@ -6429,72 +6429,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Muokkaa - + property ominaisuus - + Copy Kopio - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Nimeä ominaisuusryhmä uudelleen - + Group name: Ryhmän nimi: @@ -7842,17 +7842,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Virheellinen OpenGL-versio - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Poikkeus @@ -8440,12 +8489,12 @@ Valitse 'Abort' keskeyttääksesi Järjestelmän selaimen avaaminen ei onnistu. - + Out of memory Muisti loppui - + Not enough memory available to display the data. Muisti ei riitä tietojen näyttämiseen. @@ -8461,7 +8510,7 @@ Valitse 'Abort' keskeyttääksesi Ei voida löytää tiedostoja %1, %2 ja %3 - + Navigation styles Navigointityylit @@ -8511,11 +8560,6 @@ Valitse 'Abort' keskeyttääksesi Not allowed to delete system-wide macros Järjestelmän laajuisten makrojen poistaminen ei ole sallittua - - - Origin - Origo - Delete group content? diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 4a4d3e5a51..752e020d7f 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -328,7 +328,7 @@ Store in VarSet... - Store in VarSet... + Enregistrer dans le jeu de variables... @@ -338,7 +338,7 @@ Variable Set - Variable Set + Jeu de variables @@ -558,22 +558,22 @@ avec le bouton gauche ou droit et déplacer la souris vers le haut ou vers le ba Gui::DAG::Model - + Rename Renommer - + Renames the object Renomme l'objet - + Finish Editing Terminer l'édition - + Finishes editing the object Termine l'édition de l'objet. @@ -1245,7 +1245,7 @@ same time. The one with the highest priority will be triggered. Multi-key sequence delay - Délai des séquences à touches multiples + Retard de séquence à touches multiples @@ -1348,76 +1348,76 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Barres d'outils - + Category Catégorie - + Move Right Déplacer vers la droite - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> Déplace l'élément sélectionné d'un niveau vers le bas. Cela changera également le niveau de l'élément parent. - + Move Left Déplacer vers la gauche - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> Déplace l'élément sélectionné d'un niveau vers le haut. Cela changera également le niveau de l'élément parent. - + Move Up Déplacer vers le haut - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> Déplace l'élément sélectionné vers le haut. L'élément sera déplacé au sein du niveau hiérarchique. - + Move Down Déplacer vers le bas - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> Déplace l'élément sélectionné vers le bas. L'élément sera déplacé au sein du niveau hiérarchique. - + New Nouveau - + Rename Renommer - + Delete Supprimer - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Remarque :</span> les modifications ne seront effectives qu'au prochain chargement de l'atelier approprié.</p></body></html> @@ -2076,7 +2076,7 @@ Specify another directory. Find What - Trouver quoi + Votre recherche @@ -3573,32 +3573,32 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Image Settings - Image Settings + Paramètres de l'image Image Dimensions - Image Dimensions + Tailles de l'image Standard sizes - Standard sizes + Tailles standards &Width - &Width + &Largeur &Height - &Height + &Hauteur Aspect ratio - Aspect ratio + Rapport d'affichage @@ -3643,22 +3643,22 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Image Properties - Image Properties + Propriétés de l’image Back&ground - Back&ground + &Arrière-plan Creation method - Creation method + Méthode de création Image Comment - Image Comment + Commentaire de l'image @@ -3701,12 +3701,12 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Offscreen (new) - Offscreen (new) + Offscreen (nouveau) Offscreen (old) - Offscreen (old) + Offscreen (ancien) @@ -3744,12 +3744,12 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> General Macro Settings - General Macro Settings + Paramètres globaux des macros Macro Recording Settings - Macro Recording Settings + Paramètres d'enregistrement des macros @@ -3759,7 +3759,7 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Gui Commands - Gui Commands + Commandes de l'interface graphique @@ -3799,12 +3799,12 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Log all commands issued by menus to file - Log all commands issued by menus to file + Enregistrer toutes les commandes transmises par les menus dans un fichier Recent Macros Menu - Recent Macros Menu + Menu des macros récentes @@ -3969,13 +3969,12 @@ Trackball Classic: moving the mouse will rotate the part allowing precession. Turntable: the part will be rotated around the Z-axis (with constrained axes). Free Turntable: the part will be rotated around the Z-axis. - Rotation orbit style. -Rounded Arcball: moving the mouse in the corners of the screen will only roll the part. -Trackball: moving the mouse horizontally will rotate the part around the Y-axis. -Trackball Classic: moving the mouse will rotate the part allowing precession. -Turntable: the part will be rotated around the Z-axis (with constrained axes). -Free Turntable: the part will be rotated around the Z-axis. - + Style d'orbite de rotation : +- Arcball arrondi : déplacer la souris dans les coins de l'écran ne fera que faire rouler la pièce. +- Trackball : déplacer la souris horizontalement fera tourner la pièce autour de l'axe Y. +- Trackball classique : déplacer la souris fera tourner la pièce en permettant la précession. +- Vue en rotation : la pièce tournera autour de l'axe Z (avec des axes contraints). +- Vue en rotation libre : la pièce tournera autour de l'axe Z. @@ -4074,19 +4073,19 @@ La valeur est le diamètre de la sphère qui rentre à l'écran. Prevents view tilting when pinch-zooming. Affects only Gesture navigation style. Mouse tilting is not disabled by this setting. - Prevents view tilting when pinch-zooming. -Affects only Gesture navigation style. -Mouse tilting is not disabled by this setting. + Empêche l'inclinaison de la vue lors du zoom par pincement. +N'affecte que le style de navigation Gesture. +L'inclinaison de la souris n'est pas désactivée par ce paramètre. Space Mouse - Space Mouse + SpaceMouse Enable support of legacy SpaceMouse devices - Enable support of legacy SpaceMouse devices + Activer la prise en charge des anciens périphériques SpaceMouse @@ -4106,17 +4105,17 @@ Mouse tilting is not disabled by this setting. Navigation Cube - Navigation Cube + Cube de navigation Corner where the navigation cube is displayed - Corner where the navigation cube is displayed + Coin où s'affiche le cube de navigation Rotates to nearest possible state when clicking a face of the cube - Rotates to nearest possible state when clicking a face of the cube + Fait pivoter vers l'état le plus proche possible lorsque l'on clique sur une face du cube. @@ -4126,24 +4125,24 @@ Mouse tilting is not disabled by this setting. Rotation Center Indicator - Rotation Center Indicator + Indicateur du centre de rotation 3D navigation - 3D navigation + Navigation 3D Lists the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - Lists the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + Répertorie les configurations des boutons de la souris pour chaque paramètre de navigation sélectionné. +Sélectionner un jeu, puis appuyez sur le bouton pour afficher les configurations correspondantes. Mouse Configuration - Mouse Configuration + Configuration de la souris @@ -4284,17 +4283,17 @@ horizontal space in Python console Python profiler interval (ms) - Python profiler interval (ms) + Intervalle du profileur Python (ms) The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. - The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. + Intervalle en millisecondes pendant lequel le profileur s'exécute lorsqu'il y a du code Python en cours d'exécution (pour que l'interface graphique continue de répondre). Réglez cette valeur sur 0 pour désactiver cette option. Path to external Python executable (optional) - Path to external Python executable (optional) + Chemin d'accès vers l'exécutable Python externe (optionnel) @@ -4323,7 +4322,7 @@ Il est détecté automatiquement s'il est requis et n'est pas spécifié. Viewport Selection Behavior - Viewport Selection Behavior + Comportement de la sélection de la fenêtre d'affichage @@ -4335,9 +4334,8 @@ Il est détecté automatiquement s'il est requis et n'est pas spécifié.Area for selecting elements in the 3D view. A larger value makes it easier to select elements, but may prevent selection of small features. - Area for selecting elements in the 3D view. -A larger value makes it easier to select elements, but may prevent selection of small features. - + Zone permettant de sélectionner des éléments dans la vue 3D. +Une valeur plus élevée facilite la sélection des éléments, mais peut empêcher la sélection de petits éléments. @@ -4352,17 +4350,17 @@ A larger value makes it easier to select elements, but may prevent selection of Preselect the object in the 3D view when hovering the cursor over the tree item - Preselect the object in the 3D view when hovering the cursor over the tree item + Présélectionner l'objet dans la vue 3D lorsque le curseur survole l'élément de l'arborescence Tree Selection Behavior - Tree Selection Behavior + Comportement de la sélection de l'arborescence Auto expand tree item when the corresponding object is selected in the 3D view - Auto expand tree item when the corresponding object is selected in the 3D view + Étendre automatiquement l'arborescence lorsque l'objet correspondant est sélectionné dans la vue 3D @@ -4455,19 +4453,19 @@ A larger value makes it easier to select elements, but may prevent selection of Background Color - Background Color + Couleur de l'arrière-plan Background will have the selected color - Background will have the selected color + L'arrière-plan aura la couleur sélectionnée. Background will have the selected color gradient - Background will have the selected color gradient + L'arrière-plan aura le dégradé de couleur sélectionné. @@ -4482,12 +4480,12 @@ A larger value makes it easier to select elements, but may prevent selection of Middle - Middle + Milieu Color gradient will get the selected color as middle color - Color gradient will get the selected color as middle color + Le dégradé de couleurs prendra la couleur sélectionnée comme couleur intermédiaire. @@ -4502,27 +4500,27 @@ A larger value makes it easier to select elements, but may prevent selection of Background color for objects in the tree view that are currently edited - Background color for objects in the tree view that are currently edited + Couleur d'arrière-plan pour les objets de la vue arborescente en cours d'édition Active container object - Active container object + Objet conteneur actif Background color for active containers (e.g. part or body) in the tree view - Background color for active containers (e.g. part or body) in the tree view + Couleur d'arrière-plan pour les conteneurs actifs (par exemple, pièce ou corps) dans la vue arborescence Color bar label text color (e.g. in Mesh and FEM) - Color bar label text color (e.g. in Mesh and FEM) + Couleur du texte des étiquettes des barres de couleur (par exemple dans les ateliers Mesh et FEM) Color bar label text size (e.g. in Mesh and FEM) - Color bar label text size (e.g. in Mesh and FEM) + Taille du texte des étiquettes des barres de couleur (par exemple dans les ateliers Mesh et FEM) @@ -4572,17 +4570,17 @@ A larger value makes it easier to select elements, but may prevent selection of Units Converter - Units Converter + Convertisseur d'unités as - as + en Input the unit for the result - Input the unit for the result + Saisir l'unité pour le résultat @@ -4616,33 +4614,33 @@ Pour ajouter une conversion, appuyez sur Valider dans le champ de saisie des val Unit system to be used for the Quantity. The preference system is the one set in the general preferences. - Unit system to be used for the Quantity. -The preference system is the one set in the general preferences. + Système d'unité à utiliser pour les quantités. +Le système de préférences est celui défini dans les préférences générales. Decimals - Decimals + Décimales Decimals for the quantity - Decimals for the quantity + Décimales pour les quantités Unit category - Unit category + Catégorie d'unités Unit category for the quantity - Unit category for the quantity + Catégorie des unités pour les quantités Copies the result to the clipboard - Copies the result to the clipboard + Copie le résultat dans le presse-papiers. @@ -4695,7 +4693,7 @@ La colonne "État" indique si le document a pu être récupéré. Status of recovered documents - Status of recovered documents + Statut des documents récupérés @@ -4747,22 +4745,22 @@ La colonne "État" indique si le document a pu être récupéré. Delete the selected transient directories? - Delete the selected transient directories? + Faut-il supprimer les répertoires temporaires sélectionnés ? When deleting the selected transient directory it is not possible to recover any files afterwards. - When deleting the selected transient directory it is not possible to recover any files afterwards. + Lorsque le répertoire transitoire sélectionné est supprimé, il n'est plus possible de récupérer les fichiers qu'il contenait. Delete all transient directories? - Delete all transient directories? + Faut-il supprimer tous les répertoires transitoires ? When deleting all transient directories it is not possible to recover any files afterwards. - When deleting all transient directories it is not possible to recover any files afterwards. + Lorsque les répertoires transitoires sont supprimés, il n'est plus possible de récupérer les fichiers qu'ils contenaient. @@ -4792,7 +4790,7 @@ La colonne "État" indique si le document a pu être récupéré. Open Containing Folder - Open Containing Folder + Ouvrir le répertoire contenant @@ -4865,7 +4863,7 @@ La colonne "État" indique si le document a pu être récupéré. Clean Up - Clean Up + Nettoyer @@ -4916,7 +4914,7 @@ La colonne "État" indique si le document a pu être récupéré. Removing a folder only takes effect after an application restart - Removing a folder only takes effect after an application restart + La suppression d'un dossier ne prendra effet qu'après le redémarrage de l'application. @@ -4924,7 +4922,7 @@ La colonne "État" indique si le document a pu être récupéré. Input Vector - Input Vector + Vecteur d'entrée @@ -4952,7 +4950,7 @@ La colonne "État" indique si le document a pu être récupéré. Mouse Buttons - Mouse Buttons + Boutons de la souris @@ -4967,7 +4965,7 @@ La colonne "État" indique si le document a pu être récupéré. Panning - Panning + Panoramique @@ -4977,7 +4975,7 @@ La colonne "État" indique si le document a pu être récupéré. Zooming - Zooming + Zoomer @@ -5003,37 +5001,37 @@ La colonne "État" indique si le document a pu être récupéré. Add Sub-Group - Add Sub-Group + Ajouter un sous-groupe Remove Group - Remove Group + Supprimer un groupe Rename Group - Rename Group + Renommer un groupe Export Parameter - Export Parameter + Exporter un paramètre Import Parameter - Import Parameter + Importer un paramètre Remove this parameter group? - Remove this parameter group? + Faut-il supprimer ce groupe de paramètres ? Import error - Import error + Erreur d'importation @@ -5091,42 +5089,42 @@ La colonne "État" indique si le document a pu être récupéré. Change Value - Change Value + Changer la valeur Remove Key - Remove Key + Supprimer une clé Rename Key - Rename Key + Renommer une clé New String Item - New String Item + Nouvelle chaîne de caractère New Float Item - New Float Item + Nouvelle variable flottante New Integer Item - New Integer Item + Nouvelle variable entière New Unsigned Item - New Unsigned Item + Nouvelle variable non signée New Boolean Item - New Boolean Item + Nouvelle variable booléenne @@ -5177,12 +5175,12 @@ La colonne "État" indique si le document a pu être récupéré. Shift-click for opposite direction - Shift-click for opposite direction + Cliquer tout en maintenant la touche Maj enfoncée pour obtenir l'effet inverse Apply Axial - Apply Axial + Appliquer l'axe @@ -5192,7 +5190,7 @@ La colonne "État" indique si le document a pu être récupéré. Selected Points - Selected Points + Points sélectionnés @@ -5202,7 +5200,7 @@ La colonne "État" indique si le document a pu être récupéré. Euler angles (Z–Y′–X″) - Euler angles (Z–Y′–X″) + Angle d'Euler (Z–Y′–X′) @@ -5218,23 +5216,23 @@ La colonne "État" indique si le document a pu être récupéré. Yaw (around Z-axis) - Yaw (around Z-axis) + Angle de lacet (autour de l'axe Z) Pitch (around Y-axis) - Pitch (around Y-axis) + Angle de tangage (autour de l'axe Y) Roll (around X-axis) - Roll (around X-axis) + Angle de roulis (autour de l'axe X) Roll (around the X-axis) - Roll (around the X-axis) + Angle de roulis (autour de l'axe X) @@ -5258,12 +5256,12 @@ Certaines informations sur les distances et les angles sont fournies dans la vue Incorrect Quantity - Incorrect Quantity + Valeur incorrecte There are input fields with incorrect input. Ensure valid placement values! - There are input fields with incorrect input. Ensure valid placement values! + Il y a des champs de saisie contenant des données incorrectes. Vérifier que les valeurs saisies sont valides ! @@ -5284,7 +5282,7 @@ Certaines informations sur les distances et les angles sont fournies dans la vue Attach to Remote Debugger - Attach to Remote Debugger + Se connecter au débogueur distant @@ -5304,7 +5302,7 @@ Certaines informations sur les distances et les angles sont fournies dans la vue Port - Port + Port @@ -5348,7 +5346,7 @@ Certaines informations sur les distances et les angles sont fournies dans la vue Texture Mapping - Texture Mapping + Appliquer une texture @@ -5405,7 +5403,7 @@ Certaines informations sur les distances et les angles sont fournies dans la vue The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. - The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. + Les objets sélectionnés contiennent d'autres dépendances. Sélectionner les objets à exporter. Toutes les dépendances sont sélectionnées automatiquement par défaut. @@ -5452,14 +5450,13 @@ Certaines informations sur les distances et les angles sont fournies dans la vue &Use Original Selection - &Use Original Selection + &Utiliser la sélection d'origine Ignore dependencies and proceed with the objects originally selected prior to opening this dialog - Ignore dependencies and proceed with the objects -originally selected prior to opening this dialog + Ignorer les dépendances et continuer avec les objets initialement sélectionnés avant l'ouverture de cette boîte de dialogue @@ -5490,44 +5487,44 @@ originally selected prior to opening this dialog Normal Messages - Normal Messages + Messages normaux Log Messages - Log Messages + Messages de log Critical Messages - Critical Messages + Messages critiques Redirect Python Output - Redirect Python Output + Rediriger la sortie Python Redirect Python Errors - Redirect Python Errors + Rediriger les erreurs Python Go to End - Go to End + Aller à la fin Save As… - Save As… + Enregistrer sous… Plain text files - Plain text files + Fichiers de texte brut @@ -5538,7 +5535,7 @@ originally selected prior to opening this dialog Display Message Types - Display Message Types + Afficher les types de messages @@ -5549,7 +5546,7 @@ originally selected prior to opening this dialog Show Report View On - Show Report View On + Afficher la vue rapport @@ -5574,7 +5571,7 @@ originally selected prior to opening this dialog Python Console - Python Console + Console Python @@ -5612,37 +5609,37 @@ originally selected prior to opening this dialog Select Only - Select Only + Sélectionner uniquement Zoom Fit - Zoom Fit + Ajustement du zoom Go to Selection - Go to Selection + Aller à la sélection Mark to Recompute - Mark to Recompute + Marquer pour recalculer Marks this object to be recomputed - Marks this object to be recomputed + Marque cet objet pour qu'il soit recalculé. To Python Console - To Python Console + Vers la console Python Duplicate Subshape - Duplicate Subshape + Dupliquer la sous-forme @@ -5710,16 +5707,14 @@ originally selected prior to opening this dialog %1. This has been modified outside of the source editor. Reload it? - %1. - -This has been modified outside of the source editor. Reload it? + %1. +Ceci a été modifié en dehors de l'éditeur source. Faut-il le recharger ? The document has been modified. Save all changes? - The document has been modified. -Save all changes? + Le document a été modifié. Faut-il enregistrer toutes les modifications ? @@ -5767,7 +5762,7 @@ Save all changes? Save As - Save As + Enregistrer sous @@ -5794,22 +5789,22 @@ Save all changes? Top Left - Top Left + En haut à gauche Bottom Left - Bottom Left + En bas à gauche Top Right - Top Right + En haut à droite Bottom Right - Bottom Right + En bas à droite @@ -5837,7 +5832,7 @@ Save all changes? Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR PgUp/PgDown on keyboard. + Pincer (placer deux doigts sur l'écran et les écarter ou les rapprocher) OU faire défiler la molette de la souris OU utiliser les touches Pg.Suiv/Pg.Préc du clavier @@ -5932,7 +5927,7 @@ Save all changes? Save Value - Save Value + Enregistrer la valeur @@ -5940,7 +5935,7 @@ Save all changes? Press Ctrl and left mouse button - Press Ctrl and left mouse button + Appuyer sur Ctrl et le bouton gauche de la souris @@ -6014,7 +6009,7 @@ Save all changes? User defined… - User defined… + Défini par l'utilisateur… @@ -6064,12 +6059,12 @@ Save all changes? Macros - + Macro file doesn't exist Le fichier de la macro n'existe pas - + No such macro file: '%1' Fichier inexistant de la macro : "%1" @@ -6285,17 +6280,17 @@ Sur la vue de gauche, %1 points ont été sélectionnés, sur la vue de droite, Drag screen with two fingers OR press Alt + middle mouse button. - Drag screen with two fingers OR press Alt + middle mouse button. + Faire glisser l'écran avec deux doigts OU appuyez sur Alt + bouton central de la souris Drag screen with one finger OR press Alr + left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press Alr + left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Faire glisser l'écran avec un doigt OU appuyer sur Alt + bouton gauche de la souris. Dans l'atelier Sketcher et d'autres modes d'édition, maintenir également la touche Alt enfoncée Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. + Pincer (placer deux doigts sur l'écran et les faire glisser vers l'extérieur ou vers l'intérieur) OU faire défiler la molette de la souris OU appuyer sur Alt + bouton droit de la souris OU les touches Pg.Suiv/Pg.Préc du clavier @@ -6326,7 +6321,7 @@ Sur la vue de gauche, %1 points ont été sélectionnés, sur la vue de droite, Press Ctrl and left mouse button - Press Ctrl and left mouse button + Appuyer sur Ctrl et le bouton gauche de la souris @@ -6362,7 +6357,7 @@ Sur la vue de gauche, %1 points ont été sélectionnés, sur la vue de droite, Save Value - Save Value + Enregistrer la valeur @@ -6422,72 +6417,72 @@ Sur la vue de gauche, %1 points ont été sélectionnés, sur la vue de droite, Gui::PropertyEditor::PropertyEditor - + Edit Éditer - + property propriété - + Copy Copier - + Add Property Ajouter une propriété - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Supprimer une propriété - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Renommer le groupe de propriétés - + Group name: Nom du groupe : @@ -6531,8 +6526,8 @@ Sur la vue de gauche, %1 points ont été sélectionnés, sur la vue de droite, The application is still running. Exit without saving all data? - The application is still running. -Exit without saving all data? + L'application est toujours en cours d'exécution. +Voulez-vous quitter sans enregistrer toutes les données ? @@ -6545,7 +6540,7 @@ Exit without saving all data? Python Console - Python Console + Console Python @@ -6570,17 +6565,17 @@ Exit without saving all data? &Copy Command - &Copy Command + &Copier la commande &Copy History - &Copy History + Copier l'&historique Save History As… - Save History As… + Enregistrer l'historique sous… @@ -6606,17 +6601,17 @@ Exit without saving all data? Clear Console - Clear Console + Effacer la console Insert File Name… - Insert File Name… + Insérer un nom de fichier… Word Wrap - Word Wrap + Retour à la ligne automatique @@ -7402,12 +7397,12 @@ Specify another directory? Mark to Recompute - Mark to Recompute + Marquer pour recalculer Marks this object to be recomputed - Marks this object to be recomputed + Marque cet objet pour qu'il soit recalculé. @@ -7704,7 +7699,7 @@ Specify another directory? Python Console - Python Console + Console Python @@ -7831,17 +7826,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Version d'OpenGL non valide - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Exception @@ -8108,7 +8152,7 @@ Continue? Enter text: - Enter text: + Entrer le texte : @@ -8118,12 +8162,12 @@ Continue? Enter number: - Enter number: + Entrer un numéro : New Unsigned Item - New Unsigned Item + Nouvelle variable non signée @@ -8156,7 +8200,7 @@ Continue? Change Value - Change Value + Changer la valeur @@ -8429,12 +8473,12 @@ Choisissez "Interrompre" pour annuler. Impossible d'ouvrir le navigateur système. - + Out of memory Mémoire insuffisante - + Not enough memory available to display the data. Mémoire insuffisante pour afficher les données. @@ -8450,7 +8494,7 @@ Choisissez "Interrompre" pour annuler. Impossible de trouver le fichier %1 ni dans %2 ni dans %3 - + Navigation styles Styles de navigation @@ -8500,11 +8544,6 @@ Choisissez "Interrompre" pour annuler. Not allowed to delete system-wide macros La suppression des macros de l'ensemble du système n'est pas autorisée. - - - Origin - Origine - Delete group content? @@ -11835,22 +11874,22 @@ Mettre à zéro pour remplir l'espace. Add a Property to %1 - Add a Property to %1 + Ajouter une propriété à %1 Invalid group name - Invalid group name + Nom de groupe invalide Invalid type name - Invalid type name + Nom de type invalide Invalid property name '%1' - Invalid property name '%1' + Nom de propriété invalide « %1 » @@ -13443,7 +13482,7 @@ Proceed? Variable Set - Variable Set + Jeu de variables @@ -13898,12 +13937,12 @@ Proceed? Text&ure Mapping - Text&ure Mapping + Appliq&uer une texture Maps textures to shapes - Maps textures to shapes + Applique des textures aux formes. @@ -14346,43 +14385,43 @@ This makes the docked panel stay transparent at all times. (Warning: unit discarded) - (Warning: unit discarded) + (Attention : unité annulée) Invalid property name: %1 - Invalid property name: %1 + Nom de propriété invalide : %1 Unknown object - Unknown object + Objet inconnu the name cannot be empty - the name cannot be empty + Le nom ne peut pas être vide. %1 is a unit - %1 is a unit + %1 est une unité. %1 is a constant - %1 is a constant + %1 est une constante. %1 already exists - %1 already exists + %1 existe déjà. Invalid group name: %1 - Invalid group name: %1 + Nom de groupe invalide : %1 @@ -14502,17 +14541,17 @@ This makes the docked panel stay transparent at all times. Value out of range (%1 out of [%2, %3]) - Value out of range (%1 out of [%2, %3]) + Valeur hors plage (%1 en dehors de [%2, %3]) Not a number - Not a number + Ce n'est pas un nombre. Unit mismatch between result and required unit - Unit mismatch between result and required unit + Incohérence entre l'unité du résultat et l'unité requise diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index fb59982959..4bf26d5d8a 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Preimenuj - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ isto vrijeme, pokrenut će se onaj s najvećim prioritetom. Gui::Dialog::DlgCustomToolbars - + Toolbars Alatne trake - + Category Kategorija - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Novi - + Rename Preimenuj - + Delete Izbriši - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Bilješka:</span> Promjene postaju aktivne sljedeći put kada učitate odgovarajuću radnu površinu</p></body></html> @@ -6091,12 +6091,12 @@ Save all changes? Makronaredbe - + Macro file doesn't exist Makro datoteke ne postoji - + No such macro file: '%1' Nema takve makronaredbe datoteke: '%1 ' @@ -6452,72 +6452,72 @@ Kako želite nastaviti? Gui::PropertyEditor::PropertyEditor - + Edit Uredi - + property svojstvo - + Copy Kopiraj - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Izraz - + Property name Property name - + Rename property group Preimenuj grupu svojstava - + Group name: Naziv grupe: @@ -7867,17 +7867,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Pogrešna OpenGL Verzija - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Iznimka @@ -8469,12 +8518,12 @@ Odaberite "Prekini" za prekid Ne mogu otvoriti vaš preglednik sustava. - + Out of memory Bez memorije - + Not enough memory available to display the data. Nema dovoljno dostupne memorije za prikaz podataka. @@ -8490,7 +8539,7 @@ Odaberite "Prekini" za prekid Ne mogu pronaći datoteku %1 niti u %2 niti u %3 - + Navigation styles Načini navigacije @@ -8540,11 +8589,6 @@ Odaberite "Prekini" za prekid Not allowed to delete system-wide macros Ne možete izbrisati cijeli sustav makronaredbe - - - Origin - Ishodište - Delete group content? diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 98ce699849..411b19f4e2 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Átnevezés - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Eszköztárak - + Category Kategória - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Új - + Rename Átnevezés - + Delete Törlés - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Megjegyzés:</span> A módosítások a megfelelő munkafelület következő betöltésekor válnak aktívvá</p></body></html> @@ -5525,7 +5525,7 @@ originally selected prior to opening this dialog Save As… - Save As… + Mentés másként… @@ -6067,12 +6067,12 @@ Save all changes? Makrók - + Macro file doesn't exist Makró fájl nem létezik - + No such macro file: '%1' Nincs ilyen makró fájl: '%1' @@ -6428,72 +6428,72 @@ a jobboldali nézetben %2 pont lett jelölve. Gui::PropertyEditor::PropertyEditor - + Edit Szerkesztés - + property tulajdonság - + Copy Másolás - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Kifejezés - + Property name Property name - + Rename property group Tulajdonságcsoport átnevezése - + Group name: Csoportnév: @@ -7841,17 +7841,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Érvénytelen OpenGL verzió - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Kivétel @@ -8439,12 +8488,12 @@ A 'Megszakítás' választásával megszakít Nem lehet megnyitni a rendszer böngészőt. - + Out of memory Kevés a memória - + Not enough memory available to display the data. Nincs elég memória az adatok megjelenítéséhez. @@ -8460,7 +8509,7 @@ A 'Megszakítás' választásával megszakít Nem talál fájlt %1 -ben %2 -ben, sem %3 -ban - + Navigation styles Navigációs stílusok @@ -8510,11 +8559,6 @@ A 'Megszakítás' választásával megszakít Not allowed to delete system-wide macros Nem szabad törölni a rendszer-területi makrókat - - - Origin - Kezdőpont - Delete group content? diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index dadf90732d..7a006c7354 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Rinomina - + Renames the object Rinomina oggetto - + Finish Editing Termina modifica - + Finishes editing the object Termina la modifica dell'oggetto @@ -1348,72 +1348,72 @@ con la stessa scorciatoia sono attivi contemporaneamente sarà usato il comando Gui::Dialog::DlgCustomToolbars - + Toolbars Barre degli strumenti - + Category Categoria - + Move Right Sposta a destra - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Nuovo - + Rename Rinomina - + Delete Elimina - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;">Nota:<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;"> Le modifiche saranno attive al prossimo avvio dell'ambiente di lavoro</span></p></body></html> @@ -3022,7 +3022,7 @@ del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. Check Now - Check Now + Controlla Adesso @@ -3045,7 +3045,7 @@ del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. Color Gradient Settings - Color Gradient Settings + Impostazioni Gradiente Colore @@ -6065,12 +6065,12 @@ Save all changes? Macro - + Macro file doesn't exist Il file di macro non esiste - + No such macro file: '%1' Nessun file macro: '%1' @@ -6423,72 +6423,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Modifica - + property proprietà - + Copy Copia - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rinomina Proprietà - + Delete Property Elimina proprietà - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Espressione - + Property name Property name - + Rename property group Rinomina gruppo proprietà - + Group name: Nome gruppo: @@ -7836,17 +7836,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Versione OpenGL Non Valida - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Eccezione @@ -8434,12 +8483,12 @@ Scegli 'Annulla' per interrompere Impossibile aprire il browser di sistema. - + Out of memory Memoria insufficiente - + Not enough memory available to display the data. Memoria disponibile insufficiente per visualizzare i dati. @@ -8455,7 +8504,7 @@ Scegli 'Annulla' per interrompere Impossibile trovare il file %1 nè in %2 nè in %3 - + Navigation styles Stile di navigazione @@ -8505,11 +8554,6 @@ Scegli 'Annulla' per interrompere Not allowed to delete system-wide macros Non è consentito eliminare le macro di sistema - - - Origin - Origine - Delete group content? diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index 4147c5ae98..1b729f61e3 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename 名前の変更 - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1349,72 +1349,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars ツールバー - + Category カテゴリ - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up 上へ移動 - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down 下へ移動 - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New 新規作成 - + Rename 名前の変更 - + Delete 削除 - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">注意:</span> 変更は次回、対応するワークベンチをロードした際に有効になります</p></body></html> @@ -6049,12 +6049,12 @@ Save all changes? マクロ - + Macro file doesn't exist マクロファイルが存在しません - + No such macro file: '%1' 以下のマクロファイルは存在しません: '%1' @@ -6405,72 +6405,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit 編集 - + property プロパティ - + Copy コピー - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression 式 - + Property name Property name - + Rename property group プロパティ・グループの名前を変更 - + Group name: グループ名: @@ -7818,17 +7818,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version 無効な OpenGL バージョンです。 - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception 例外 @@ -8416,12 +8465,12 @@ Choose 'Abort' to abort お使いのシステムのブラウザーを開くことができません。 - + Out of memory メモリ不足 - + Not enough memory available to display the data. データを表示するのに十分なメモリがありません。 @@ -8437,7 +8486,7 @@ Choose 'Abort' to abort %2 にも %3 にもファイル %1 が見つかりません。 - + Navigation styles ナビゲーションスタイル @@ -8487,11 +8536,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros システム全体のマクロを削除することはできません - - - Origin - 原点 - Delete group content? diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index 35ec26d95d..afdf84884a 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename სახელის გადარქმევა - + Renames the object Renames the object - + Finish Editing ჩასწორების დასრულება - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars ხელსაწყოთა ზოლები - + Category კატეგორია - + Move Right გაწევა მარჯვნივ - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left გაწევა მარცხნივ - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up აწევა - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down დაწევა - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New ახალი - + Rename გადარქმევა - + Delete წაშლა - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">შენიშვნა:</span>ცვლილებები ძალაში მხოლოდ შესაბამისი სამუშაო მაგიდის შემდეგი ჩატვირთვისას შევა</p></body></html> @@ -2793,7 +2793,7 @@ in the corner in % of height/width of the viewport Letter color - Letter color + ასოების ფერი @@ -4932,7 +4932,7 @@ The 'Status' column shows whether the document could be recovered. Input Vector - Input Vector + შეიყვანეთ ვექტორი @@ -5190,7 +5190,7 @@ The 'Status' column shows whether the document could be recovered. Apply Axial - Apply Axial + ღერძის გადატარება @@ -5616,7 +5616,7 @@ originally selected prior to opening this dialog Select Only - Select Only + მხოლოდ მონიშნული @@ -6068,12 +6068,12 @@ Save all changes? მაკროები - + Macro file doesn't exist მაკროს ფაილი არ არსებობს - + No such macro file: '%1' მაკროს ფაილი %1 არ არსებობს @@ -6427,72 +6427,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit ჩასწორება - + property თვისება - + Copy კოპირება - + Add Property თვისების დამატება - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property თვისების წაშლა - + Rename property Rename property - + Show Hidden დამალულების ჩვენება - + Auto-Expand ავტოგაფართოება - + Expression გამოთქმა - + Property name სასტუმროს სახელი - + Rename property group თვისებების ჯგუფის სახელის გადარქმევა - + Group name: ჯგუფის სახელი: @@ -7605,7 +7605,7 @@ Specify another directory? Grid snap in - Grid snap in + ბადის ბიბმა @@ -7840,17 +7840,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version არასწორი OpenGL-ის ვერსია - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception გამონაკლისი @@ -8127,7 +8176,7 @@ Continue? Enter number: - Enter number: + შეიყვანეთ ნომერი: @@ -8438,12 +8487,12 @@ Choose 'Abort' to abort სისტემური ბრაუზერის გაშვების შეცდომა. - + Out of memory მეხსიერება აღარ არის - + Not enough memory available to display the data. არ არის საკმარისი მეხსიერება მონაცემთა საჩვენებლად. @@ -8459,7 +8508,7 @@ Choose 'Abort' to abort ვერ ვიპოვე ფაილი %1, ვერც %2 და ვერც %3 - + Navigation styles ნავიგაციის სტილები @@ -8509,11 +8558,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros სისტემური მაკროების წაშლა აკრძალულია - - - Origin - საწყისი - Delete group content? @@ -12713,7 +12757,7 @@ the region are non-opaque. RadioButton - RadioButton + გადამრთველი @@ -14131,7 +14175,7 @@ This makes the docked panel stay transparent at all times. Toggle &Left - Toggle &Left + გადართვა მარ&ცხნივ @@ -14375,7 +14419,7 @@ This makes the docked panel stay transparent at all times. %1 is a unit - %1 is a unit + %1 საზომი ერთეულია @@ -14403,7 +14447,7 @@ This makes the docked panel stay transparent at all times. Numeric - Numeric + რიცხვითი @@ -14458,7 +14502,7 @@ This makes the docked panel stay transparent at all times. Toolbox Bars - Toolbox Bars + ხელსაწყოს ზოლები @@ -14515,7 +14559,7 @@ This makes the docked panel stay transparent at all times. Not a number - Not a number + რიცხვი არაა diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 927c32853b..35eb7817a7 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename 이름 바꾸기 - + Renames the object 대상체 이름 바꾸기 - + Finish Editing Finish Editing - + Finishes editing the object 대상체 편집 끝내기 @@ -1350,72 +1350,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars 도구 모음 - + Category 카테고리 - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New 새로 만들기 - + Rename 이름 바꾸기 - + Delete 삭제 - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">노트:</span> 다음 번에 적절한 워크벤치를 로드할 때 변경사항이 활성화됩니다.</p></body></html> @@ -6067,12 +6067,12 @@ Save all changes? 매크로 - + Macro file doesn't exist 매크로 파일이 없습니다. - + No such macro file: '%1' 해당 매크로 파일이 없습니다: '%1' @@ -6426,72 +6426,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit 편집 - + property 속성 - + Copy 복사하기 - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression 표현식 - + Property name Property name - + Rename property group 속성 그룹 이름 바꾸기 - + Group name: 그룹이름: @@ -7839,17 +7839,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception 예외 @@ -8435,12 +8484,12 @@ Choose 'Abort' to abort 시스템 브라우저를 열 수 없습니다. - + Out of memory 메모리 부족 - + Not enough memory available to display the data. 데이터를 화면표시하는 데 사용할 수 있는 메모리가 충분하지 않습니다. @@ -8456,7 +8505,7 @@ Choose 'Abort' to abort %2 또는 %3에서 %1 파일을 찾을 수 없습니다 - + Navigation styles 탐색 스타일 @@ -8506,11 +8555,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros 시스템 전체 매크로 삭제가 허용되지 않음 - - - Origin - 원점 - Delete group content? diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 696a4c6c32..0a47d08cef 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Hernoemen - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Werkbalken - + Category Categorie - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Nieuw - + Rename Hernoemen - + Delete Verwijderen - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> Opmerking: de aanpassingen worden pas doorgevoerd de eerstvolgende keer dat de betreffende werkbank wordt geladen @@ -6062,12 +6062,12 @@ Save all changes? Macro's - + Macro file doesn't exist Macro-bestand bestaat niet - + No such macro file: '%1' Geen dergelijke macro-bestand: '%1' @@ -6420,72 +6420,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Bewerken - + property eigenschap - + Copy Kopie - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expressie - + Property name Property name - + Rename property group Hernoem de groep eigenschappen - + Group name: Groepsnaam: @@ -7833,17 +7833,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Verkeerde OpenGL versie - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Uitzondering @@ -8431,12 +8480,12 @@ Kies 'Afbreken' om af te breken Kan uw standaard browser niet starten. - + Out of memory Onvoldoende geheugen - + Not enough memory available to display the data. Niet genoeg geheugen beschikbaar om de gegevens weer te geven. @@ -8452,7 +8501,7 @@ Kies 'Afbreken' om af te breken Kan bestand %1 niet vinden noch in %2, noch in %3 - + Navigation styles Navigatie stijlen @@ -8502,11 +8551,6 @@ Kies 'Afbreken' om af te breken Not allowed to delete system-wide macros Niet toegestaan om systeem macro's te verwijderen - - - Origin - Oorsprong - Delete group content? diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 0361338aba..9d42f56d4d 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -42,7 +42,7 @@ Test Console Output - Test Console Output + Testowanie wyjścia konsoli @@ -169,12 +169,12 @@ Toggle Transparency - Toggle Transparency + Przełącz przezroczystość Toggle Selectability - Toggle Selectability + Przełącz możliwość zaznaczenia @@ -247,7 +247,7 @@ Tree View - Tree View + Widok drzewa @@ -270,22 +270,22 @@ Global sensitivity - Global sensitivity + Czułość globalnie Dominant mode - Dominant mode + Tryb wymuszenia Enable translations - Enable translations + Zezwól na przekształcenia Enable rotations - Enable rotations + Zezwól na obroty @@ -323,12 +323,12 @@ Expression Editor - Expression Editor + Edytor wyrażeń Store in VarSet... - Store in VarSet... + Zapisz w zbiorze zmiennych … @@ -338,7 +338,7 @@ Variable Set - Variable Set + Zestaw zmiennych @@ -399,7 +399,7 @@ The object will have the color of its individual faces editable with the Appearance per Face command - The object will have the color of its individual faces editable with the Appearance per Face command + Obiekt będzie miał kolory poszczególnych ścian, które można edytować za pomocą polecenia Wygląd dla ściany. @@ -417,7 +417,7 @@ Enter expression… (=) - Enter expression… (=) + Wprowadź wyrażenie … (=) @@ -504,7 +504,7 @@ Press Shift and middle mouse button - Press Shift and middle mouse button + Naciśnij Shift i środkowy przycisk myszy @@ -532,14 +532,15 @@ Press middle+left or middle+right mouse button - Press middle+left or middle+right mouse button + Naciśnij środkowy + lewy +lub środkowy + prawy przycisk myszki Scroll mouse wheel or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll mouse wheel or keep middle button depressed -while doing a left or right click and move the mouse up or down + Przewiń kółkiem myszki lub przytrzymaj naciśnięty środkowy przycisk, +podczas kliknięcia lewym lub prawym przyciskiem i przesuwaj kursor w górę lub w dół. @@ -558,24 +559,24 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Zmień nazwę - + Renames the object - Renames the object + Zmień nazwę obiektu + + + + Finish Editing + Zakończ edycję - Finish Editing - Finish Editing - - - Finishes editing the object - Finishes editing the object + Kończy edycję obiektu @@ -1351,76 +1352,76 @@ wyzwolone zostanie to, które ma najwyższy priorytet. Gui::Dialog::DlgCustomToolbars - + Toolbars Paski narzędzi - + Category Kategoria - + Move Right Przesuń w prawo - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Przenosi zaznaczony element o jeden poziom w dół.</b> <p> Zmieniony zostanie także poziom pozycji nadrzędnej. </p> - + Move Left Przesuń w lewo - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Przenosi zaznaczony element o jeden poziom w górę.</b> <p> Zmieniony zostanie także poziom pozycji nadrzędnej. </p> - + Move Up Przesuń w górę - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Przenosi zaznaczony element w górę.</b> <p> Element zostanie przesunięty w ramach tego samego poziomu hierarchii.</p> - + Move Down Przesuń w dół - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Przenosi zaznaczony element w dół.</b> <p> Element zostanie przesunięty w ramach tego samego poziomu hierarchii.</p> - + New Nowy - + Rename Zmień nazwę - + Delete Usuń - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Uwaga:</span> Zmiany staną się aktywne przy następnym załadowaniu środowiska pracy.</p></body></html> @@ -1792,28 +1793,28 @@ a następnie Zamknij. Delete the macro '%1'? - Delete the macro '%1'? + Usunąć makrodefinicję '%1'? Walkthrough, Dialog 1 of 2 - Walkthrough, Dialog 1 of 2 + Przewodnik krok po kroku, okno dialogowe 1 z 2 Walkthrough, Dialog 1 of 1 - Walkthrough, Dialog 1 of 1 + Przewodnik krok po kroku, okno dialogowe 1 z 1 Walkthrough, Dialog 2 of 2 - Walkthrough, Dialog 2 of 2 + Przewodnik krok po kroku, okno dialogowe 2 z 2 Enter new name - Enter new name + Wprowadź nową nazwę @@ -1858,7 +1859,7 @@ Możliwy błąd dostępu do pliku? Record Macro - Record Macro + Nagrywaj makrodefinicję @@ -1868,12 +1869,12 @@ Możliwy błąd dostępu do pliku? Macro Path - Macro Path + Ścieżka do pliku makrodefinicji Choose Folder - Choose Folder + Wybierz katalog @@ -1903,22 +1904,25 @@ Możliwy błąd dostępu do pliku? Specify a place to save first. - Specify a place to save first. + Najpierw określ miejsce zapisu The macro directory does not exist. Choose another one. - The macro directory does not exist. Choose another one. + Katalog z makrodefinicjami nie istnieje. +Wybierz inny. The macro '%1' already exists. Overwrite it? - The macro '%1' already exists. Overwrite it? + Makrodefinicja '%1' już istnieje. +Nadpisać? You have no write permission for the directory. Choose another one. - You have no write permission for the directory. Choose another one. + Nie masz uprawnień zapisu do katalogu. +Wybierz inny. @@ -1951,7 +1955,7 @@ Możliwy błąd dostępu do pliku? Material Properties - Material Properties + Właściwości materiału @@ -1966,12 +1970,12 @@ Możliwy błąd dostępu do pliku? Ambient color - Ambient color + Kolor otoczenia Specular color - Specular color + Kolor odbicia @@ -1981,7 +1985,7 @@ Możliwy błąd dostępu do pliku? Emissive color - Emissive color + Kolor emisji @@ -1998,12 +2002,12 @@ Możliwy błąd dostępu do pliku? Online Help - Online Help + Pomoc online Help Viewer - Help Viewer + Przeglądarka pomocy @@ -2028,9 +2032,9 @@ Możliwy błąd dostępu do pliku? Access denied to '%1' Specify another directory. - Access denied to '%1' + Odmowa dostępu do '%1' -Specify another directory. +Określ inny katalog. @@ -2053,7 +2057,7 @@ Specify another directory. Enter a group name to search - Enter a group name to search + Wprowadź nazwę grupy do wyszukania @@ -2068,7 +2072,7 @@ Specify another directory. Search group - Search group + Szukaj grupy @@ -2097,7 +2101,7 @@ Specify another directory. Look At - Look At + Weź pod uwagę @@ -2117,7 +2121,7 @@ Specify another directory. Match exact string - Match exact string + Dopasuj dokładnie ciąg znaków @@ -2132,7 +2136,7 @@ Specify another directory. Cannot find the text: %1 - Cannot find the text: %1 + Nie można znaleźć tekstu: %1 @@ -2174,7 +2178,7 @@ Specify another directory. Search group - Search group + Szukaj grupy @@ -2197,7 +2201,7 @@ Specify another directory. Open Addon Manager - Open Addon Manager + Otwórz Menedżer dodatków @@ -2220,17 +2224,19 @@ Specify another directory. Deletes the user-saved preference pack '%1' - Deletes the user-saved preference pack '%1' + Usuwa paczkę preferencji zapisaną przez użytkownika '%1' Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) - Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) + Przełącza widoczność paczki preferencji dodatku '%1' +(użyj Menedżera dodatków, aby usunąć na stałe) Delete the preference pack named '%1'? This cannot be undone. - Delete the preference pack named '%1'? This cannot be undone. + Usunąć pakiet preferencji o nazwie '%1'? +Operacja jest nieodwracalna. @@ -2258,7 +2264,7 @@ Specify another directory. Search preferences... - Search preferences... + Ustawienia wyszukiwania … @@ -2270,7 +2276,7 @@ Specify another directory. Reset Page '%1' - Reset Page '%1' + Zresetuj ustawienia strony "%1" @@ -2280,47 +2286,47 @@ Specify another directory. Reset Group '%1' - Reset Group '%1' + Zresetuj ustawienia z grupy '%1' Reset All - Reset All + Zresetuj wszystko Clear User Settings - Clear User Settings + Wyczyść ustawienia użytkownika Clear all your user settings? - Clear all your user settings? + Wyczyścić wszystkie ustawienia użytkownika? All settings will be cleared. - All settings will be cleared. + Wszystkie ustawienia zostaną wyczyszczone. Restart Required - Restart Required + Wymagane ponowne uruchomienie Restart FreeCAD for changes to take effect. - Restart FreeCAD for changes to take effect. + Zrestartuj FreeCAD, aby zmiany odniosły skutek. Restart Now - Restart Now + Uruchom ponownie teraz Restart Later - Restart Later + Uruchom ponownie później @@ -2343,7 +2349,7 @@ Specify another directory. Document Information - Document Information + Informacje o dokumencie @@ -2353,7 +2359,7 @@ Specify another directory. &Name - &Name + &Nazwa @@ -2368,37 +2374,37 @@ Specify another directory. Program version - Program version + Wersja programu Unit system - Unit system + Układ jednostek Created &by - Created &by + &Utworzony przez: Creation &date - Creation &date + &Data utworzenia: &Last modified by - &Last modified by + &Ostatnio zmodyfikowany przez Last &modification date - Last &modification date + Data ostatniej &modyfikacji Com&pany - Com&pany + &Firma: @@ -2827,21 +2833,21 @@ can be rendered directly by the GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support. - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by the GPU. + Jeśli opcja jest zaznaczona, zostanie użyty Vertex Buffer Objects (VBO). +VBO jest funkcją OpenGL, która dostarcza metod do wysyłania +danych o punktach (pozycja, normalny wektor, kolor, itp.) do karty graficznej. +Używanie VBO zapewnia znaczny wzrost wydajności, ponieważ dane te znajdują się +w pamięci graficznej, a nie w pamięci systemowej, dlatego też +można bezpośrednio renderować używając GPU. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support. +Uwaga: Czasami ta funkcja może powodować różne problemy, od anomalii graficznych po awarie GPU. +Pamiętaj, aby zgłosić, że ustawienie jest włączone, jeśli będziesz szukać wsparcia. Method of multisample anti-aliasing - Method of multisample anti-aliasing + Metoda wielokrotnego próbkowania wygładzania krawędzi + @@ -2856,7 +2862,7 @@ report this setting as enabled when seeking support. Transparent objects - Transparent objects + Przezroczystość obiektów @@ -2867,13 +2873,13 @@ There are 3 options available to achieve this: 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - 'Render caching' is another way to say 'Rendering acceleration'. -There are 3 options available to achieve this: -1) 'Auto' (default), let Coin3D decide where to cache. -2) 'Distributed', manually turn on cache for all view provider root node. -3) 'Centralized', manually turn off cache in all nodes of all view provider, and -only cache at the scene graph root node. This offers the fastest rendering speed -but slower response to any scene changes. + "Buforowanie renderowania" to inny sposób "przyspieszania renderowania”. +Dostępne są 3 opcje: +1) „Automatycznie" (domyślnie), niech Coin3D zdecyduje gdzie buforować. +2) „Rozproszone", ręcznie włącz buforowanie dla wszystkich węzłów głównego dostawcy widoku. +3) „Scentralizowane", ręcznie wyłącz cache we wszystkich węzłach wszystkich dostawców widoków, oraz +tylko cache w głównym węźle graficznym obrazu. +Oferuje to najszybszą prędkość renderowania ale wolniej reaguje na każdą zmianę ujęcia. @@ -2887,12 +2893,12 @@ rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. Camera Type - Camera Type + Typ projekcji Objects will be in orthographic projection - Objects will be in orthographic projection + Podczas wyświetlania obiekty będą rzutowane w projekcji ortogonalnej @@ -2992,12 +2998,12 @@ rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. Location (read-only) - Location (read-only) + Lokalizacja (tylko do odczytu) Check periodically at program start - Check periodically at program start + Sprawdzaj okresowo przy starcie programu @@ -3032,12 +3038,12 @@ rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. Cache size limit - Cache size limit + Limit rozmiaru pamięci podręcznej Check Now - Check Now + Sprawdź teraz @@ -3060,37 +3066,37 @@ rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. Color Gradient Settings - Color Gradient Settings + Ustawienia kolorów gradientu Color Model - Color Model + Model kolorów &Gradient - &Gradient + &Gradient Red-yellow-green-cyan-blue - Red-yellow-green-cyan-blue + Czerwono-żółto-zielono-błękitno-niebieski Blue-cyan-green-yellow-red - Blue-cyan-green-yellow-red + Niebiesko-błękitno-zielono-żółto-czerwony White-black - White-black + Biało-czarny Black-white - Black-white + Czarno-biały @@ -3169,27 +3175,27 @@ będą wyświetlane z przezroczystością Parameter Range - Parameter Range + Zakres parametru Ma&ximum - Ma&ximum + Mak&simum &Labels - &Labels + &Etykiety Mi&nimum - Mi&nimum + Mi&nimum &Decimals - &Decimals + &Miejsca po przecinku @@ -3313,36 +3319,36 @@ oprócz paska kolorów Using undo/redo in documents - Using undo/redo in documents + Użyj Cofnij / Ponów w dokumentach Maximum undo/redo steps - Maximum undo/redo steps + Maksymalna ilość kroków Cofnij / Ponów How many undo/redo steps should be recorded - How many undo/redo steps should be recorded + Ile kroków Cofnij / Ponów powinno być zapisanych Allow user aborting document recomputation by pressing Esc. This feature may slightly increase recomputation time. - Allow user aborting document recomputation by pressing Esc. -This feature may slightly increase recomputation time. + Zezwalaj użytkownikowi na przerywanie przeliczania dokumentu poprzez naciśnięcie Esc. +Ta funkcja może nieznacznie zwiększyć czas przeliczania. Add thumbnail to project file when saving - Add thumbnail to project file when saving + Dodaj miniaturkę do pliku projektu podczas zapisywania Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512. - Sets the size of the thumbnail that is stored in the document. -Common sizes are 128, 256 and 512. + Ustawia rozmiar miniatury, która jest przechowywana w dokumencie. +Typowe rozmiary to 128, 256 i 512. @@ -3353,23 +3359,23 @@ Common sizes are 128, 256 and 512. If there is a recovery file available, the application will automatically run a file recovery when it is started - If there is a recovery file available, the application will -automatically run a file recovery when it is started + Jeśli dostępny jest plik odzyskiwania aplikacja +automatycznie uruchomi odzyskiwanie po uruchomieniu The program icon will be added to the thumbnail - The program icon will be added to the thumbnail + Logo programu zostanie dodane do miniaturki Add program icon to the generated thumbnail - Add program icon to the generated thumbnail + Dodaj logo programu do wygenerowanej miniatury Save auto-recovery information every - Save auto-recovery information every + Zapisz informacje automatycznego odzyskiwania co @@ -3390,7 +3396,7 @@ get date suffix according to the specified format Document Objects - Document Objects + Obiekty dokumentu @@ -3594,32 +3600,32 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Image Settings - Image Settings + Ustawienia obrazu Image Dimensions - Image Dimensions + Wymiary obrazu Standard sizes - Standard sizes + Rozmiary standardowe &Width - &Width + &Szerokość &Height - &Height + &Wysokość Aspect ratio - Aspect ratio + Proporcje obrazu @@ -3664,22 +3670,22 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Image Properties - Image Properties + Właściwości obrazu Back&ground - Back&ground + &Tło Creation method - Creation method + Metoda tworzenia Image Comment - Image Comment + Komentarz do obrazka @@ -3722,12 +3728,12 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Offscreen (new) - Offscreen (new) + Pozaekranowy (Nowy) Offscreen (old) - Offscreen (old) + Pozaekranowy (Stary) @@ -3765,22 +3771,22 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> General Macro Settings - General Macro Settings + Ustawienia ogólne dla makrodefinicji Macro Recording Settings - Macro Recording Settings + Ustawienia nagrywania makrodefinicji Macro Path - Macro Path + Ścieżka do pliku makrodefinicji Gui Commands - Gui Commands + Polecenia GUI @@ -3820,12 +3826,12 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Log all commands issued by menus to file - Log all commands issued by menus to file + Rejestruj wszystkie polecenia wydane przez menu do pliku Recent Macros Menu - Recent Macros Menu + Menu z ostatnio użytymi makrodefinicjami @@ -3990,12 +3996,12 @@ Trackball Classic: moving the mouse will rotate the part allowing precession. Turntable: the part will be rotated around the Z-axis (with constrained axes). Free Turntable: the part will be rotated around the Z-axis. - Rotation orbit style. -Rounded Arcball: moving the mouse in the corners of the screen will only roll the part. -Trackball: moving the mouse horizontally will rotate the part around the Y-axis. -Trackball Classic: moving the mouse will rotate the part allowing precession. -Turntable: the part will be rotated around the Z-axis (with constrained axes). -Free Turntable: the part will be rotated around the Z-axis. + Styl obrotu widoku. +Rounded Arcball: przesuwanie myszy w rogach ekranu powoduje jedynie obrót obiektu. +Trackball: przesuwanie myszy w poziomie obraca obiekt wokół osi Y. +Trackball Classic: przesuwanie myszy obraca obiekt z możliwością precesji. +Turntable: obiekt obraca się wokół osi Z (z ograniczonymi osiami). +Free Turntable: obiekt obraca się wokół osi Z @@ -4095,19 +4101,19 @@ Wartością jest średnica kuli, która ma zmieścić się na ekranie.Prevents view tilting when pinch-zooming. Affects only Gesture navigation style. Mouse tilting is not disabled by this setting. - Prevents view tilting when pinch-zooming. -Affects only Gesture navigation style. -Mouse tilting is not disabled by this setting. + Eliminuje obroty widoku podczas wykonywania gestu przybliż / oddal. +Dotyczy tylko nawigacji Gesture. +Obracanie przy pomocy myszki nie jest blokowane. Space Mouse - Space Mouse + SpaceMouse Enable support of legacy SpaceMouse devices - Enable support of legacy SpaceMouse devices + Włącz obsługę starszych urządzeń SpaceMouse @@ -4127,17 +4133,17 @@ Mouse tilting is not disabled by this setting. Navigation Cube - Navigation Cube + Kostka nawigacyjna Corner where the navigation cube is displayed - Corner where the navigation cube is displayed + Narożnik, w którym wyświetlana jest kostka nawigacji Rotates to nearest possible state when clicking a face of the cube - Rotates to nearest possible state when clicking a face of the cube + Obróć do najbliższego stanu po kliknięciu ściany kostki nawigacyjnej @@ -4147,24 +4153,24 @@ Mouse tilting is not disabled by this setting. Rotation Center Indicator - Rotation Center Indicator + Wskaźnik środka obrotu 3D navigation - 3D navigation + Styl nawigacji w przestrzeni 3D Lists the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - Lists the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + Lista konfiguracji przycisku myszki dla każdego wybranego ustawienia nawigacji. +Wybierz zestaw, a następnie naciśnij przycisk, w celu wyświetlenia konfiguracji. Mouse Configuration - Mouse Configuration + Konfiguracja myszki @@ -4306,17 +4312,18 @@ długość wiersza w konsoli Python Python profiler interval (ms) - Python profiler interval (ms) + Interwał profili Pythona (ms) The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. - The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. + Interwał w milisekundach, w którym działa profiler, gdy uruchomiony jest kod Python (aby GUI nadal reagowało). +Ustaw wartość 0, aby wyłączyć. Path to external Python executable (optional) - Path to external Python executable (optional) + Ścieżka do zewnętrznego pliku wykonywalnego Python (opcjonalnie) @@ -4345,7 +4352,7 @@ Wykrywana automatycznie, jeśli jest potrzebna i nie została określona. Viewport Selection Behavior - Viewport Selection Behavior + Sposób działania zaznaczenia widoku @@ -4357,9 +4364,8 @@ Wykrywana automatycznie, jeśli jest potrzebna i nie została określona.Area for selecting elements in the 3D view. A larger value makes it easier to select elements, but may prevent selection of small features. - Area for selecting elements in the 3D view. -A larger value makes it easier to select elements, but may prevent selection of small features. - + Obszar do zaznaczania elementów w widoku 3D. +Większa wartość ułatwia wybieranie elementów, ale może utrudniać zaznaczanie drobnych cech. @@ -4374,17 +4380,17 @@ A larger value makes it easier to select elements, but may prevent selection of Preselect the object in the 3D view when hovering the cursor over the tree item - Preselect the object in the 3D view when hovering the cursor over the tree item + Wstępny wybór obiektu w oknie Widoku 3D, po wskazaniu kursorem elementu drzewa Tree Selection Behavior - Tree Selection Behavior + Zachowanie zaznaczania w drzewie Auto expand tree item when the corresponding object is selected in the 3D view - Auto expand tree item when the corresponding object is selected in the 3D view + Automatycznie rozwiń drzewko, gdy odpowiedni obiekt jest zaznaczony w oknie widoku 3D @@ -4477,19 +4483,19 @@ A larger value makes it easier to select elements, but may prevent selection of Background Color - Background Color + Kolor tła Background will have the selected color - Background will have the selected color + Tło będzie miało wybrany kolor Background will have the selected color gradient - Background will have the selected color gradient + Tło będzie miało wybrany gradient kolorów @@ -4504,12 +4510,12 @@ A larger value makes it easier to select elements, but may prevent selection of Middle - Middle + Pośrodku Color gradient will get the selected color as middle color - Color gradient will get the selected color as middle color + Gradient otrzyma wybrany kolor jako kolor na środku @@ -4519,32 +4525,32 @@ A larger value makes it easier to select elements, but may prevent selection of Tree View - Tree View + Widok drzewa Background color for objects in the tree view that are currently edited - Background color for objects in the tree view that are currently edited + Kolor tła dla edytowanych obiektów w widoku drzewa Active container object - Active container object + Aktywny obiekt kontenera Background color for active containers (e.g. part or body) in the tree view - Background color for active containers (e.g. part or body) in the tree view + Kolor tła aktywnych kontenerów (np. części lub zawartości) w widoku drzewa Color bar label text color (e.g. in Mesh and FEM) - Color bar label text color (e.g. in Mesh and FEM) + Kolor tekstu paska kolorów (np. w środowisku roboczym Siatka i FEM) Color bar label text size (e.g. in Mesh and FEM) - Color bar label text size (e.g. in Mesh and FEM) + Rozmiar tekstu na etykiecie paska kolorów (np. w środowisku roboczym Siatka i FEM) @@ -4594,17 +4600,17 @@ A larger value makes it easier to select elements, but may prevent selection of Units Converter - Units Converter + Przelicznik jednostek as - as + na Input the unit for the result - Input the unit for the result + Wprowadź jednostkę dla wyniku @@ -4632,39 +4638,39 @@ Aby dodać obliczenie, naciśnij klawisz Enter w polu wprowadzania wartości Unit system - Unit system + Układ jednostek Unit system to be used for the Quantity. The preference system is the one set in the general preferences. - Unit system to be used for the Quantity. -The preference system is the one set in the general preferences. + System jednostek, który ma być używany dla ilości +System preferencji to ten, który jest ustawiony w preferencjach ogólnych. Decimals - Decimals + Miejsca po przecinku Decimals for the quantity - Decimals for the quantity + Miejsca dziesiętne dla ilości Unit category - Unit category + Kategoria jednostek Unit category for the quantity - Unit category for the quantity + Kategoria jednostki dla ilości Copies the result to the clipboard - Copies the result to the clipboard + Skopiuj wynik do schowka @@ -4717,12 +4723,12 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Status of recovered documents - Status of recovered documents + Status odzyskanych dokumentów Document name - Document name + Nazwa dokumentu @@ -4769,22 +4775,22 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Delete the selected transient directories? - Delete the selected transient directories? + Usunąć wybrane katalogi przejściowe? When deleting the selected transient directory it is not possible to recover any files afterwards. - When deleting the selected transient directory it is not possible to recover any files afterwards. + Po usunięciu wybranego katalogu przejściowego nie będziesz w stanie odzyskać żadnych plików. Delete all transient directories? - Delete all transient directories? + Usunąć wszystkie katalogi przejściowe? When deleting all transient directories it is not possible to recover any files afterwards. - When deleting all transient directories it is not possible to recover any files afterwards. + Po usunięciu wybranych katalogów przejściowych nie będziesz w stanie odzyskać żadnych plików. @@ -4814,7 +4820,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Open Containing Folder - Open Containing Folder + Otwórz katalog zawierający @@ -4887,7 +4893,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Clean Up - Clean Up + Wyczyść @@ -4938,7 +4944,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Removing a folder only takes effect after an application restart - Removing a folder only takes effect after an application restart + Usuwanie katalogu staje się skuteczne tylko po ponownym uruchomieniu aplikacji @@ -4946,7 +4952,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Input Vector - Input Vector + Wprowadź wektor @@ -4974,7 +4980,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Mouse Buttons - Mouse Buttons + Przyciski myszki @@ -4989,7 +4995,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Panning - Panning + Przesuwanie @@ -4999,7 +5005,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Zooming - Zooming + Przybliż / Oddal @@ -5025,37 +5031,37 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Add Sub-Group - Add Sub-Group + Dodaj grupę podrzędną Remove Group - Remove Group + Usuń grupę Rename Group - Rename Group + Zmień nazwę grupy Export Parameter - Export Parameter + Eksportuj parametr Import Parameter - Import Parameter + Importuj parametr Remove this parameter group? - Remove this parameter group? + Usunąć tę grupę parametrów? Import error - Import error + Błąd podczas importu @@ -5113,42 +5119,42 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Change Value - Change Value + Zmień wartość Remove Key - Remove Key + Usuń klucz Rename Key - Rename Key + Zmień nazwę klucza New String Item - New String Item + Nowy element tekstowy New Float Item - New Float Item + Nowy element liczby zmiennoprzecinkowej New Integer Item - New Integer Item + Nowy element liczby całkowitej New Unsigned Item - New Unsigned Item + Nowy element liczby całkowitej bez znaku New Boolean Item - New Boolean Item + Nowy element logiczny @@ -5199,12 +5205,12 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Shift-click for opposite direction - Shift-click for opposite direction + Przytrzymaj klawisz SHIFT, aby odwrócić kierunek Apply Axial - Apply Axial + Zastosuj wzdłuż osi @@ -5214,7 +5220,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Selected Points - Selected Points + Wybrane punkty @@ -5224,7 +5230,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Euler angles (Z–Y′–X″) - Euler angles (Z–Y′–X″) + Kąty Eulera (Z–Y′–X″) @@ -5271,17 +5277,19 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. + Wybierz 1, 2 lub 3 punkty przed kliknięciem na ten przycisk. Punktem może być wierzchołek, ściana lub krawędź. Jeśli zostanie wybrany punkt na ścianie lub na krawędzi, zostanie użyty punkt pozycji myszy na tej ścianie lub wzdłuż tej krawędzi. Jeśli zostanie wybrany 1 punkt, to zostanie on użyty jako środek obrotu. Jeśli zostaną wybrane 2 punkty, to punkt pomiędzy nimi zostanie wybrany jako środek obrotu, a te punkty utworzą nową oś, jeśli jest taka potrzeba. Jeśli zostaną wybrane 3 punkty to pierwszy punkt zostanie użyty jako środek obrotu i jako wierzchołek wektora normalnego do płaszczyzny zdefiniowanej przez te 3 punkty. Niektóre odległości i kąty są pokazane na widoku raportu, mogę być one pomocne przy dopasowywaniu obiektów. +Dla Twojej wygody, gdy naciśniesz Shift+Click, to odpowiednia odległość lub kąt są skopiowane do schowka. Incorrect Quantity - Incorrect Quantity + Nieprawidłowa ilość There are input fields with incorrect input. Ensure valid placement values! - There are input fields with incorrect input. Ensure valid placement values! + Istnieją pola wejściowe z nieprawidłowym wejściem. +Upewnij się, że wartości położenia są poprawne! @@ -5302,7 +5310,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Attach to Remote Debugger - Attach to Remote Debugger + Przełącz na debugger zewnętrzny @@ -5322,7 +5330,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Port - Port + Port @@ -5366,7 +5374,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Texture Mapping - Texture Mapping + Odwzorowanie tekstur @@ -5423,7 +5431,8 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. - The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. + Wybrane obiekty zawierają inne zależności. Wybierz, które obiekty mają być eksportowane. +Wszystkie zależności są domyślnie wybierane. @@ -5508,44 +5517,44 @@ wstępnie wybranymi przed otwarciem tego okna dialogowego Normal Messages - Normal Messages + Zwykłe komunikaty Log Messages - Log Messages + Komunikaty dziennika Critical Messages - Critical Messages + Komunikaty krytyczne Redirect Python Output - Redirect Python Output + Przekieruj wyjście z Pythona Redirect Python Errors - Redirect Python Errors + Przekieruj błędy Pythona Go to End - Go to End + Przejdź na koniec Save As… - Save As… + Zapisz jako … Plain text files - Plain text files + Pliki tekstowe @@ -5592,7 +5601,7 @@ wstępnie wybranymi przed otwarciem tego okna dialogowego Python Console - Python Console + Konsola Python @@ -5630,37 +5639,37 @@ wstępnie wybranymi przed otwarciem tego okna dialogowego Select Only - Select Only + Wybierz tylko Zoom Fit - Zoom Fit + Dopasuj powiększenie Go to Selection - Go to Selection + Przejdź do zaznaczenia Mark to Recompute - Mark to Recompute + Zaznacz do ponownej kalkulacji Marks this object to be recomputed - Marks this object to be recomputed + Zaznacza ten obiekt do ponownej kalkulacji To Python Console - To Python Console + Do konsoli Python Duplicate Subshape - Duplicate Subshape + Zduplikowany kształt podrzędny @@ -5728,16 +5737,17 @@ wstępnie wybranymi przed otwarciem tego okna dialogowego %1. This has been modified outside of the source editor. Reload it? - %1. + %1. -This has been modified outside of the source editor. Reload it? +Modyfikacja została wykonana poza edytorem źródłowym. +Załadować ponownie? The document has been modified. Save all changes? - The document has been modified. -Save all changes? + Dokument został zmodyfikowany. +Zapisać wszystkie zmiany? @@ -5785,7 +5795,7 @@ Save all changes? Save As - Save As + Zapisz jako @@ -5812,22 +5822,22 @@ Save all changes? Top Left - Top Left + Lewy górny Bottom Left - Bottom Left + Lewy dolny Top Right - Top Right + Prawy górny Bottom Right - Bottom Right + Prawy dolny @@ -5952,7 +5962,7 @@ bądź przyciskami PgUp / PgDown na klawiaturze. Save Value - Save Value + Zapisz wartość @@ -5960,7 +5970,7 @@ bądź przyciskami PgUp / PgDown na klawiaturze. Press Ctrl and left mouse button - Press Ctrl and left mouse button + Naciśnij klawisz Ctrl i lewy przycisk myszki @@ -6034,7 +6044,7 @@ bądź przyciskami PgUp / PgDown na klawiaturze. User defined… - User defined… + Wartość użytkownika … @@ -6084,12 +6094,12 @@ bądź przyciskami PgUp / PgDown na klawiaturze. Makrodefinicje - + Macro file doesn't exist Plik makrodefinicji nie istnieje - + No such macro file: '%1' Nie ma takiego pliku makroinstrukcji: '%1' @@ -6156,14 +6166,15 @@ bądź przyciskami PgUp / PgDown na klawiaturze. The exported object contains external link. Save the documentat least once before exporting. - The exported object contains external link. Save the documentat least once before exporting. + Wyeksportowany obiekt zawiera zewnętrzny odnośnik. +Proszę zapisać dokument przynajmniej raz przed wyeksportowaniem. To link to external objects, the document must be saved at least once. Save the document now? - To link to external objects, the document must be saved at least once. -Save the document now? + Aby powiązać z obiektami zewnętrznymi, dokument musi być zapisany co najmniej raz. +Zapisać dokument teraz? @@ -6195,17 +6206,17 @@ Save the document now? Select at least 1 point in the left and the right view - Select at least 1 point in the left and the right view + Wybierz co najmniej 1 punkt w lewym i prawym widoku Select at least %1 points in the left and the right view - Select at least %1 points in the left and the right view + Proszę, wybierz co najmniej %1 punkty/ów w lewym i prawym widoku Select points in the left and right view - Select points in the left and right view + Wybierz punkty w lewym i prawym widoku @@ -6283,12 +6294,12 @@ Jak chcesz kontynuować? &Remove Last Point - &Remove Last Point + &Usuń ostatni punkt &Synchronize Views - &Synchronize Views + &Synchronizuj widoki @@ -6306,17 +6317,20 @@ Jak chcesz kontynuować? Drag screen with two fingers OR press Alt + middle mouse button. - Drag screen with two fingers OR press Alt + middle mouse button. + Przeciągnij po ekranie dwoma palcami lub wciśnij Alt + kliknij prawym przyciskiem myszki. Drag screen with one finger OR press Alr + left mouse button. In Sketcher and other edit modes, hold Alt in addition. - Drag screen with one finger OR press Alr + left mouse button. In Sketcher and other edit modes, hold Alt in addition. + Przeciągnij po ekranie jednym palcem lub naciśnij klawisz ALT + lewy przycisk myszki. W innych trybach jak np. Szkicownik dodatkowo przytrzymaj wciśnięty klawisz Alt. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. - Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. + Uszczypnięcie (umieść dwa palce na ekranie i przesuń je od siebie lub do siebie) +lub przewijanie kółkiem myszy +lub naciśnięcie Alt + prawy przycisk myszy +lub klawisze PgUp/PgDown na klawiaturze. @@ -6337,17 +6351,17 @@ Jak chcesz kontynuować? Press Ctrl and middle mouse button - Press Ctrl and middle mouse button + Naciśnij klawisz CTRL i środkowy przycisk myszki Press Ctrl and right mouse button - Press Ctrl and right mouse button + Naciśnij klawisz Ctrl i prawy przycisk myszki Press Ctrl and left mouse button - Press Ctrl and left mouse button + Naciśnij klawisz Ctrl i lewy przycisk myszki @@ -6383,12 +6397,12 @@ Jak chcesz kontynuować? Save Value - Save Value + Zapisz wartość Clear List - Clear List + Wyczyść listę @@ -6406,7 +6420,7 @@ Jak chcesz kontynuować? Abort the operation? - Abort the operation? + Przerwać operację? @@ -6424,7 +6438,7 @@ Jak chcesz kontynuować? Abort the operation? - Abort the operation? + Przerwać operację? @@ -6443,72 +6457,72 @@ Jak chcesz kontynuować? Gui::PropertyEditor::PropertyEditor - + Edit Edycja - + property właściwość - + Copy Kopiuj - + Add Property Dodaj właściwość - + Rename Property Group - Rename Property Group + Zmień nazwę grupy właściwości - + Rename Property Zmień nazwę właściwości - + Delete Property Usuń właściwość - + Rename property - Rename property + Zmień nazwę właściwości - + Show Hidden - Show Hidden + Pokaż ukryte - + Auto-Expand - Auto-Expand + Rozwijaj automatycznie - + Expression Wyrażenie - + Property name - Property name + Nazwa właściwości - + Rename property group Zmień nazwę grupy właściwości - + Group name: Nazwa grupy: @@ -6552,8 +6566,8 @@ Jak chcesz kontynuować? The application is still running. Exit without saving all data? - The application is still running. -Exit without saving all data? + Aplikacja nadal działa. +Zakończyć bez zapisywania wszystkich danych? @@ -6566,7 +6580,7 @@ Exit without saving all data? Python Console - Python Console + Konsola Python @@ -6591,17 +6605,17 @@ Exit without saving all data? &Copy Command - &Copy Command + &Kopiuj polecenie &Copy History - &Copy History + &Kopiuj historię Save History As… - Save History As… + Zapisz historię jako … @@ -6627,17 +6641,17 @@ Exit without saving all data? Clear Console - Clear Console + Wyczyść okienko konsoli Insert File Name… - Insert File Name… + Wstaw nazwę pliku … Word Wrap - Word Wrap + &Zawijanie wierszy @@ -6670,7 +6684,7 @@ Exit without saving all data? Execute in Console - Execute in Console + Wykonaj w konsoli @@ -6679,7 +6693,7 @@ Exit without saving all data? Clear Recent Files Empties the list of recent files - Clear Recent Files + Wyczyść listę ostatnio używanych @@ -6715,7 +6729,7 @@ Exit without saving all data? Press Shift and middle mouse button - Press Shift and middle mouse button + Naciśnij Shift i środkowy przycisk myszy @@ -6751,7 +6765,7 @@ Exit without saving all data? Select Module - Select Module + Wybierz moduł @@ -6777,12 +6791,12 @@ Exit without saving all data? Download Online Help - Download Online Help + Pobierz pomoc online Downloads %1's online help - Downloads %1's online help + Pobrano %1 z pomocy online @@ -6794,18 +6808,17 @@ Exit without saving all data? The directory '%1' does not exist. Specify an existing directory? - The directory '%1' does not exist. + Katalog '%1' nie istnieje. -Specify an existing directory? +Chcesz wybrać istniejący katalog? You don't have write permission to '%1' Specify another directory? - You don't have write permission to '%1' - -Specify another directory? + Nie masz uprawnienie do zapisu w '%1' +Wybierz inny katalog? @@ -6839,7 +6852,7 @@ Specify another directory? Set Element Color - Set Element Color + Ustaw kolor elementu @@ -6864,17 +6877,17 @@ Specify another directory? Remove All - Remove All + Usuń wszystkie Box Select - Box Select + Zaznacz obszarem On top when selected - On top when selected + Na górze po wybraniu @@ -6893,12 +6906,12 @@ Specify another directory? Document window - Document window + Okno dokumentu Plot mode - Plot mode + Tryb kreślenia @@ -6987,17 +7000,17 @@ Specify another directory? Press Shift button - Press Shift button + Naciśnij klawisz Shift Press Alt button - Press Alt button + Naciśnij klawisz Alt Press Ctrl and Shift buttons - Press Ctrl and Shift buttons + Naciśnij klawisze Ctrl i Shift @@ -7220,7 +7233,7 @@ Specify another directory? Malay - Malay + malajski @@ -7261,37 +7274,38 @@ Specify another directory? Activate Document - Activate Document + Uaktywnij dokument Activates document %1 - Activates document %1 + Uaktywnij dokument %1 Tree Settings - Tree Settings + Ustawienia drzewa Show Description - Show Description + Pokaż opis Show Internal Name - Show Internal Name + Pokaż nazwę wewnętrzną Shows a description column for items. An item's description can be set by by editing the 'label2' property. - Shows a description column for items. An item's description can be set by by editing the 'label2' property. + Pokazuje kolumnę opisu dla elementów. +Opis elementu może być ustawiony poprzez edycję właściwości 'label2'. Shows an internal name column for items. - Shows an internal name column for items. + Pokazuje kolumnę wewnętrznej nazwy dla elementów. @@ -7332,117 +7346,117 @@ Specify another directory? Show Items Hidden in Tree View - Show Items Hidden in Tree View + Pokaż elementy ukryte w widoku drzewa Shows items that are marked as 'hidden' in the tree view - Shows items that are marked as 'hidden' in the tree view + Pokaż elementy, które są oznaczone jako "ukryte" w widoku drzewa Toggle Visibility in Tree View - Toggle Visibility in Tree View + Przełącz widoczność w widoku drzewa Create Group - Create Group + Utwórz Grupę Creates a group - Creates a group + Tworzy grupę Renames object - Renames object + Zmiana nazwę obiektu Finish Editing - Finish Editing + Zakończ edycję Finishes editing object - Finishes editing object + Kończy edycję obiektu Add Dependent Objects to Selection - Add Dependent Objects to Selection + Dodaj obiekty zależne do zaznaczenia Close Document - Close Document + Zamknij dokument Closes the document - Closes the document + Zamyka dokument Reveals the current file location in Finder - Reveals the current file location in Finder + Pokazuje bieżącą lokalizację pliku w okienku wyszukiwarki Opens the current file location - Opens the current file location + Otwiera bieżącą lokalizację pliku Reload Document - Reload Document + Przeładuj dokument Reloads a partially loaded document - Reloads a partially loaded document + Ładuje ponownie częściowo załadowany dokument Skip Recomputes - Skip Recomputes + Pomiń przeliczanie Enables or disables the recomputations of document - Enables or disables the recomputations of document + Włącza lub wyłącza ponowne przeliczenie dokumentu Allow Partial Recomputes - Allow Partial Recomputes + Zezwalaj na częściowe przeliczanie Enables or disables the recomputating editing object when 'skip recomputation' is enabled - Enables or disables the recomputating editing object when 'skip recomputation' is enabled + Włącza lub wyłącza przeliczanie obiektu edycji, gdy "pomijanie przeliczania" jest włączone Mark to Recompute - Mark to Recompute + Zaznacz do ponownej kalkulacji Marks this object to be recomputed - Marks this object to be recomputed + Zaznacza ten obiekt do ponownej kalkulacji Recompute Object - Recompute Object + Przelicz obiekt Recomputes the selected object - Recomputes the selected object + Przelicza wybrany obiekt @@ -7506,12 +7520,12 @@ Specify another directory? Copy Table - Copy Table + Kopiuj tabelę Paste Table - Paste Table + Wklej tabelę @@ -7542,7 +7556,7 @@ Specify another directory? Selects the '%1' workbench - Selects the '%1' workbench + Wybiera środowisko pracy "%1" @@ -7621,7 +7635,7 @@ Specify another directory? Grid snap in - Grid snap in + Przyciągnij do siatki @@ -7724,22 +7738,22 @@ Specify another directory? Report View - Report View + Widok raportu Python Console - Python Console + Konsola Python Tree View - Tree View + Widok drzewa Property View - Property View + Widok właściwości @@ -7829,16 +7843,18 @@ Specify another directory? Some documents require recomputation for migration purposes. It is highly recommended to perform a recomputation before any modification to avoid compatibility problems. Recompute now? - Some documents require recomputation for migration purposes. It is highly recommended to perform a recomputation before any modification to avoid compatibility problems. + Niektóre dokumenty wymagają ponownego przeliczenia do celów migracji. +Zalecane jest ponowne przeliczenie przed wykonaniem modyfikacji, +w celu uniknięcia problemów kompatybilności. -Recompute now? +Czy uruchomić przeliczanie teraz? Failed to recompute some documents. Check the report view for more details. - Failed to recompute some documents. -Check the report view for more details. + Nie udało się przeliczyć niektórych dokumentów. +Sprawdź widok raportu, aby uzyskać więcej informacji. @@ -7856,17 +7872,68 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. + W tym systemie działa OpenGL w wersji %1.%2. +FreeCAD wymaga OpenGL 2.0 lub nowszego. +W razie potrzeby zaktualizuj sterownik i / lub kartę graficzną. - + Invalid OpenGL Version Nieprawidłowa wersja OpenGL - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Wyjątek @@ -7907,39 +7974,40 @@ na temat obiektów, których to dotyczy. Printing… - Printing… + Drukowanie … Exporting PDF… - Exporting PDF… + Eksportowanie PDF … The exported object contains an external link. Save the document.at least once before exporting. - The exported object contains an external link. Save the document.at least once before exporting. + Wyeksportowany obiekt zawiera zewnętrzny odnośnik. +Proszę zapisać dokument przynajmniej raz przed wyeksportowaniem. Copy Selected - Copy Selected + Kopiuj wybrane Copy Active Document - Copy Active Document + Kopiuj aktywny dokument Copy All Documents - Copy All Documents + Kopiuj wszystkie dokumenty Failed to parse some of the expressions. Check the report view for more details. - Failed to parse some of the expressions. -Check the report view for more details. + Nie udało się przetworzyć niektórych wyrażeń. +Sprawdź widok raportu, aby uzyskać więcej informacji. @@ -7991,36 +8059,36 @@ Check the report view for more details. Restart FreeCAD and enter safe mode? - Restart FreeCAD and enter safe mode? + Zrestartować FreeCAD i przejść do trybu awaryjnego? Safe mode temporarily disables the configuration and addons. - Safe mode temporarily disables the configuration and addons. + Tryb awaryjny tymczasowo wyłącza konfigurację i dodatki. &Save Views… - &Save Views… + &Zapisz widoki … &Load Views… - &Load Views… + &Załaduj widoki … F&reeze View - F&reeze View + Z&amroź widoki &Clear Views - &Clear Views + &Wyczyść widoki @@ -8049,18 +8117,18 @@ Check the report view for more details. Importing the restored views would clear the already stored views. Continue? - Importing the restored views would clear the already stored views. -Continue? + Importowanie przywróconych widoków wyczyści już przechowywane widoki. +Kontynuować? Save Image - Save Image + Zapisz obrazek Choose an Image File to Open - Choose an Image File to Open + Wybierz plik obrazu do otwarcia @@ -8075,7 +8143,7 @@ Continue? Restore View &%1 - Restore View &%1 + Przywróć widok &%1 @@ -8136,7 +8204,7 @@ Continue? Enter text: - Enter text: + Wprowadź tekst: @@ -8146,12 +8214,12 @@ Continue? Enter number: - Enter number: + Wprowadź ilość: New Unsigned Item - New Unsigned Item + Nowy element liczby całkowitej bez znaku @@ -8184,7 +8252,7 @@ Continue? Change Value - Change Value + Zmień wartość @@ -8217,12 +8285,12 @@ Continue? Skip confirmation of further critical message notifications while loading the file? - Skip confirmation of further critical message notifications while loading the file? + Pomiń potwierdzenie kolejnych krytycznych powiadomień podczas ładowania pliku? Critical message - Critical message + Komunikat krytyczny @@ -8247,7 +8315,7 @@ Powiadomienia są pomijane! Check report view for more… - Check report view for more… + Sprawdź widok raportu, aby uzyskać więcej informacji … @@ -8315,12 +8383,12 @@ Czy chcesz zapisać plik pod inną nazwą? Save document under new filename… - Save document under new filename… + Zapisz dokument pod nową nazwą pliku … Save a copy of the document under new filename… - Save a copy of the document under new filename… + Zapisz kopię dokumentu pod nową nazwą pliku … @@ -8460,12 +8528,12 @@ Wybierz "Przerwij", aby zrezygnować Nie można otworzyć przeglądarki systemowej. - + Out of memory Przekroczono limit pamięci - + Not enough memory available to display the data. Za mało dostępnej pamięci, aby wyświetlić dane. @@ -8481,7 +8549,7 @@ Wybierz "Przerwij", aby zrezygnować Nie znaleziono pliku %1 w %2, ani w %3 - + Navigation styles Style nawigacji @@ -8494,17 +8562,17 @@ Wybierz "Przerwij", aby zrezygnować Unsaved Document - Unsaved Document + Niezapisany dokument Save all changes to document '%1' before closing? - Save all changes to document '%1' before closing? + Zapisać wszystkie zmiany do dokumentu '%1' przed zamknięciem? Save all changes to document before closing? - Save all changes to document before closing? + Zapisać wszystkie zmiany do dokumentu przed zamknięciem? @@ -8519,7 +8587,8 @@ Wybierz "Przerwij", aby zrezygnować Some documents could not be saved. Cancel closing? - Some documents could not be saved. Cancel closing? + Niektóre dokumenty nie mogły zostać zapisane. +Przerwać zamykanie dokumentów? @@ -8531,11 +8600,6 @@ Wybierz "Przerwij", aby zrezygnować Not allowed to delete system-wide macros Nie wolno usuwać makrodefinicji systemowych - - - Origin - Odniesienie położenia - Delete group content? @@ -8565,19 +8629,19 @@ Wybierz "Przerwij", aby zrezygnować Simple Group - Simple Group + Prosta grupa Group With Links - Group With Links + Grupa z łączami Group With Transform Links - Group With Transform Links + Grupa z łączami przekształceń @@ -8625,8 +8689,8 @@ Wybierz "Przerwij", aby zrezygnować The property or group name must only contain alphanumericals, underscore, and must not start with a digit. - The property or group name must only contain alphanumericals, -underscore, and must not start with a digit. + Nazwa właściwości lub nazwa grupy może zawierać tylko znaki alfanumeryczne, +podkreślenie i nie może zaczynać się od cyfry. @@ -8665,27 +8729,28 @@ underscore, and must not start with a digit. Setup Configurable Object - Setup Configurable Object + Konfiguracja obiektu parametrycznego Selects which object to copy or exclude when configuration changes. All external linked objects are excluded by default. - Selects which object to copy or exclude when configuration changes. All external linked objects are excluded by default. + Wybierz, które obiekty mają być kopiowane lub wykluczane przy zmianie konfiguracji. +Domyślnie wykluczane są wszystkie obiekty powiązane zewnętrznie. Select which objects to copy when the configuration is changed - Select which objects to copy when the configuration is changed + Wybierz, które obiekty mają być kopiowane po zmianie konfiguracji Applies the setting to all links - Applies the setting to all links + Stosuje ustawienia do wszystkich łączy Copy on Change - Copy on Change + Kopiuj przy zmianie @@ -8707,19 +8772,18 @@ underscore, and must not start with a digit. Copies the linked object when its configuration is changed. Also auto redo the copy if the original linked object is changed. - Copies the linked object when its configuration is changed. -Also auto redo the copy if the original linked object is changed. - + Kopiuje obiekt powiązany, gdy jego konfiguracja zostanie zmieniona. +Automatycznie ponawia kopiowanie, jeśli oryginalny obiekt powiązany ulegnie zmianie. Disable Copy on Change - Disable Copy on Change + Wyłącz kopiowanie przy zmianie Refresh Configurable Object - Refresh Configurable Object + Przelicz obiekt parametryczny @@ -8727,31 +8791,30 @@ Also auto redo the copy if the original linked object is changed. creating a new deep copy. Any changes made to the current copy will be lost. - Synchronizes the original configurable source object by -creating a new deep copy. Any changes made to -the current copy will be lost. + Synchronizuje oryginalny konfigurowalny obiekt źródłowy przez utworzenie nowej wiernej kopii. +Wszelkie zmiany dokonane w bieżącej kopii zostaną utracone. Toggle Array Elements - Toggle Array Elements + Przełącz elementy szyku Changes whether to show each link array element as individual objects - Changes whether to show each link array element as individual objects + Zmienia sposób wyświetlania elementów tablicy łączy — jako obiekty indywidualne Transforms the object at the origin of the placement - Transforms the object at the origin of the placement + Przekształca obiekt w miejscu pochodzenia umiejscowienia Override Colors - Override Colors + Zastąp kolory @@ -8897,7 +8960,7 @@ the current copy will be lost. Check navigation cube - Check navigation cube + Sprawdź kostkę nawigacji @@ -8917,13 +8980,13 @@ the current copy will be lost. Do not use it in a production environment. - Do not use it in a production environment. + Proszę nie używać tej wersji w środowisku produkcyjnym. Press Esc to hide hint - Press Esc to hide hint + Naciśnij Esc, aby ukryć podpowiedź @@ -8933,22 +8996,22 @@ the current copy will be lost. Change Image - Change Image + Zmień obrazek Active Object - Active Object + Aktywny obiekt Edit Text - Edit Text + Edytuj tekst Close this dialog? - Close this dialog? + Zamknąć to okno dialogowe? @@ -8984,7 +9047,7 @@ the current copy will be lost. Displays information about %1 - Displays information about %1 + Wyświetla informacje o %1 @@ -8997,7 +9060,7 @@ the current copy will be lost. Displays information about Qt - Displays information about Qt + Wyświetla informacje o %1 @@ -9005,12 +9068,12 @@ the current copy will be lost. &Next - &Następny + &Następne Activates the next window - Activates the next window + Uaktywnia następne okno. @@ -9018,12 +9081,12 @@ the current copy will be lost. &Previous - &Poprzedni + &Poprzednie Switches to the previously active window - Switches to the previously active window + Przełącza do okna aktywnego wcześniej @@ -9036,7 +9099,7 @@ the current copy will be lost. Tiles pragmatic - Tiles pragmatic + Okna kaskadowo, dopasowane @@ -9049,7 +9112,7 @@ the current copy will be lost. Closes the active window - Closes the active window + Zamknij aktywne okno @@ -9062,7 +9125,7 @@ the current copy will be lost. Closes all windows - Closes all windows + Zamyka wszystkie okna @@ -9075,7 +9138,7 @@ the current copy will be lost. Copies the selection to the clipboard - Copies the selection to the clipboard + Kopiuje zaznaczenie do schowka @@ -9088,7 +9151,7 @@ the current copy will be lost. Removes the selection and copies it to the clipboard - Removes the selection and copies it to the clipboard + Usuwa zaznaczenie i kopiuje do schowka @@ -9109,7 +9172,7 @@ the current copy will be lost. Record &Macro - Record &Macro + Nagrywaj &makrodefinicję @@ -9137,7 +9200,7 @@ the current copy will be lost. Lists available dock panels - Lists available dock panels + Lista dostępnych zadokowanych paneli @@ -9145,7 +9208,7 @@ the current copy will be lost. Toggle &Edit Mode - Toggle &Edit Mode + Przełącz tryb &Edycji @@ -9158,12 +9221,12 @@ the current copy will be lost. &Export… - &Export… + &Eksportuj … Exports an object in the active document - Exports an object in the active document + Eksportuje obiekt do aktywnego dokumentu @@ -9173,7 +9236,7 @@ the current copy will be lost. Select objects to export before using the Export command. - Select objects to export before using the Export command. + Wybierz obiekty do eksportu przed użyciem polecenia Eksportuj. @@ -9181,7 +9244,7 @@ the current copy will be lost. Expression Actions - Expression Actions + Akcje z wyrażeniami @@ -9199,7 +9262,7 @@ the current copy will be lost. Recomputes a feature or document - Recomputes a feature or document + Przelicza obiekt lub dokument @@ -9220,7 +9283,7 @@ the current copy will be lost. F&reeze Display - F&reeze Display + Z&amroź widok @@ -9233,12 +9296,12 @@ the current copy will be lost. &Import… - &Import… + &Importuj … Imports a file into the active document - Imports a file into the active document + Importuje plik do aktywnego dokumentu @@ -9256,7 +9319,7 @@ the current copy will be lost. &Link Navigation - &Link Navigation + &Nawigacja przy użyciu łączy @@ -9274,7 +9337,7 @@ the current copy will be lost. Unlinks the object by placing it directly in the container - Unlinks the object by placing it directly in the container + Odłącz obiekt poprzez umieszczenie go bezpośrednio w kontenerze @@ -9282,12 +9345,12 @@ the current copy will be lost. &Merge Document - &Merge Document + &Połącz dokument Merges another FreeCAD document into the active one - Merges another FreeCAD document into the active one + Przyłącza do aktywnego dokumentu inny dokument FreeCAD @@ -9317,12 +9380,12 @@ the current copy will be lost. &New Document - &New Document + &Nowy dokument Creates a new empty document - Creates a new empty document + Tworzy nowy pusty dokument @@ -9343,12 +9406,12 @@ the current copy will be lost. &Open… - &Open… + &Otwórz … Opens a document or imports files - Opens a document or imports files + Otwiera dokument lub importuje pliki @@ -9381,7 +9444,7 @@ the current copy will be lost. Pastes the contents of the clipboard - Pastes the contents of the clipboard + Wkleja zawartość schowka @@ -9407,7 +9470,7 @@ the current copy will be lost. Displays the list of recently opened files - Displays the list of recently opened files + Wyświetla listę ostatnio otwartych plików @@ -9446,7 +9509,7 @@ the current copy will be lost. Saves the active document - Saves the active document + Zapisuje aktywny dokument @@ -9459,7 +9522,7 @@ the current copy will be lost. Saves all open documents - Saves all open documents + Zapisuje wszystkie otwarte dokumenty @@ -9472,7 +9535,7 @@ the current copy will be lost. Selects all objects in the active document - Selects all objects in the active document + Zaznacza wszystkie obiekty w aktywnym dokumencie @@ -9550,7 +9613,7 @@ the current copy will be lost. Sets the camera to the bottom view - Sets the camera to the bottom view + Ustawia ujęcie widoku w widoku od dołu @@ -9563,7 +9626,7 @@ the current copy will be lost. Sets the camera to the dimetric view - Sets the camera to the dimetric view + Ustawia ujęcie widoku na widok dimetryczny @@ -9571,7 +9634,7 @@ the current copy will be lost. Inventor Example #1 - Inventor Example #1 + Inventor Przykład #1 @@ -9584,7 +9647,7 @@ the current copy will be lost. Inventor Example #2 - Inventor Example #2 + Inventor Przykład #2 @@ -9602,7 +9665,7 @@ the current copy will be lost. Sets the camera to the front view - Sets the camera to the front view + Ustawia ujęcie widoku w widoku od przodu @@ -9615,7 +9678,7 @@ the current copy will be lost. Sets the camera to the default home view - Sets the camera to the default home view + Ustawia ujęcie widoku w domyślnym widoku początkowym @@ -9628,7 +9691,7 @@ the current copy will be lost. Sets the camera to the isometric view - Sets the camera to the isometric view + Ustawia ujęcie widoku na widok izometryczny @@ -9641,7 +9704,7 @@ the current copy will be lost. Switches stereo viewing to interleaved columns - Switches stereo viewing to interleaved columns + Przełącza widok stereo na tryb z przeplotem kolumn @@ -9654,7 +9717,7 @@ the current copy will be lost. Switches stereo viewing to interleaved rows - Switches stereo viewing to interleaved rows + Przełącza widok stereo na tryb z przeplotem wierszy @@ -9667,7 +9730,7 @@ the current copy will be lost. Switches stereo viewing off - Switches stereo viewing off + Wyłącza widok stereo @@ -9680,7 +9743,7 @@ the current copy will be lost. Sets the camera to the left view - Sets the camera to the left view + Ustawia ujęcie widoku na lewy widok @@ -9693,7 +9756,7 @@ the current copy will be lost. Sets the camera to the rear view - Sets the camera to the rear view + Ustawia ujęcie widoku na widok z tyłu @@ -9706,7 +9769,7 @@ the current copy will be lost. Sets the camera to the right view - Sets the camera to the right view + Ustawia ujęcie widoku na prawy widok @@ -9719,7 +9782,7 @@ the current copy will be lost. Rotates the view by 90° counter-clockwise - Rotates the view by 90° counter-clockwise + Obraca widok o 90° w lewo @@ -9732,7 +9795,7 @@ the current copy will be lost. Sets the camera to the top view - Sets the camera to the top view + Ustawia ujęcie widoku na górny widok @@ -9745,7 +9808,7 @@ the current copy will be lost. Sets the camera to the trimetric view - Sets the camera to the trimetric view + Ustawia ujęcie widoku na widok trimetrii @@ -9758,7 +9821,7 @@ the current copy will be lost. Opens the documentation for the selected command - Opens the documentation for the selected command + Otwiera dokumentację dla wybranego polecenia @@ -9766,7 +9829,7 @@ the current copy will be lost. Activate Window - Activate Window + Uaktywnij okno @@ -9784,7 +9847,7 @@ the current copy will be lost. Switches between workbenches - Switches between workbenches + Przełącz Środowisko pracy @@ -9797,7 +9860,7 @@ the current copy will be lost. Displays the main window in fullscreen mode - Displays the main window in fullscreen mode + Wyświetla okno główne w trybie pełnoekranowym @@ -9805,7 +9868,7 @@ the current copy will be lost. Orthographic View - Orthographic View + Widok ortogonalny @@ -9818,7 +9881,7 @@ the current copy will be lost. Perspective View - Perspective View + Widok perspektywy @@ -9836,7 +9899,7 @@ the current copy will be lost. Expands the active document and collapses all others - Expands the active document and collapses all others + Wyświetla aktywny dokument i chowa pozostałe @@ -9849,7 +9912,7 @@ the current copy will be lost. Preselects the object in 3D view when hovering the cursor over the tree item - Preselects the object in 3D view when hovering the cursor over the tree item + Wstępny wybór obiektu w oknie Widoku 3D, po wskazaniu kursorem elementu drzewa @@ -9862,7 +9925,7 @@ the current copy will be lost. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Wyświetla aktywny widok w trybie pełnoekranowym, oddokowanym lub zadokowanym @@ -9875,7 +9938,7 @@ the current copy will be lost. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Wyświetla aktywny widok w trybie pełnoekranowym, oddokowanym lub zadokowanym @@ -9883,7 +9946,7 @@ the current copy will be lost. Save &Image… - Save &Image… + Zapisz &Obrazek … @@ -9901,7 +9964,7 @@ the current copy will be lost. Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Wyświetla aktywny widok w trybie pełnoekranowym, oddokowanym lub zadokowanym @@ -9914,7 +9977,7 @@ the current copy will be lost. Increases the zoom factor by a fixed amount - Increases the zoom factor by a fixed amount + Zwiększa współczynnik powiększenia o stałą wartość @@ -9927,7 +9990,7 @@ the current copy will be lost. Decreases the zoom factor by a fixed amount - Decreases the zoom factor by a fixed amount + Zmniejsza współczynnik powiększenia o stałą wartość @@ -9938,9 +10001,9 @@ the current copy will be lost. Continue? - The following referencing objects might break. + Następujące obiekty odniesienia mogą ulec zniszczeniu. -Continue? +Kontynuować? @@ -10033,8 +10096,8 @@ Continue? To link to external objects, the document must be saved at least once. Save the document now? - To link to external objects, the document must be saved at least once. -Save the document now? + Aby powiązać z obiektami zewnętrznymi, dokument musi być zapisany co najmniej raz. +Zapisać dokument teraz? @@ -10085,7 +10148,8 @@ Save the document now? Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled - Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled + Wyświetla ikonkę oka przed elementami widoku drzewa, pokazując ich stan widoczności. +Po kliknięciu widoczność jest przełączana @@ -10123,22 +10187,22 @@ Save the document now? Standard &Views - Standard &Views + Widoki &standardowe Individual Views - Individual Views + Poszczególne widoki &Online Help - &Online Help + &Pomoc online Link Actions - Link Actions + Akcje z łączami @@ -10260,41 +10324,41 @@ Save the document now? Enable Notification Area - Enable Notification Area + Włącz obszar powiadomień Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. - Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. + Włącza nieinwazyjne powiadomienia wyskakujące wyświetlane nad obszarem powiadomień na pasku stanu. Powiadomienia te można zamknąć samodzielnie, klikając na nie, a także automatycznie – określając minimalny i maksymalny czas ich wyświetlania. -Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. +Dodatkowo powiadomienia te mogą zostać całkowicie wyłączone. W takim przypadku użytkownik nadal może korzystać z obszaru powiadomień jako szybkiego miejsca dostępu do komunikatów, bez rozpraszających wyskakujących powiadomień. Enable Pop-Up Notifications - Enable Pop-Up Notifications + Włącz powiadomienia w dymkach Minimum duration - Minimum duration + Najkrótszy czas trwania Maximum duration - Maximum duration + Najdłuższy czas trwania Maximum concurrent notification count - Maximum concurrent notification count + Maksymalna liczba równoczesnych powiadomień Notification bubble width - Notification bubble width + Szerokość okienka powiadomień @@ -10329,7 +10393,7 @@ Additionally, pop-up notifications can be disabled. In this case the user can st Additional Data Sources - Additional Data Sources + Dodatkowe źródła danych @@ -10349,12 +10413,12 @@ Additionally, pop-up notifications can be disabled. In this case the user can st Notifications List - Notifications List + Lista zgłoszeń Maximum notification count - Maximum notification count + Maksymalna liczba powiadomień @@ -10403,55 +10467,54 @@ Additionally, pop-up notifications can be disabled. In this case the user can st <html><head/><body><p>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select <span style=" font-weight:600; font-style:italic;">Sort alphabetically</span>. Additional workbenches can be installed through the addon manager.</p><p> Currently installed workbenches:</p></body></html> - <html><head/><body><p>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select <span style=" font-weight:600; font-style:italic;">Sort alphabetically</span>. Additional workbenches can be installed through the addon manager.</p><p> -Currently installed workbenches:</p></body></html> + <html><head/><body><p>Można zmieniać kolejność środowisk pracy metodą "przeciągnij i upuść" lub posortować je, klikając prawym przyciskiem myszy dowolny obszar roboczy i wybierając <span style=" font-weight:600; font-style:italic;">Sortuj alfabetycznie</span>. Dodatkowe środowiska pracy można zainstalować poprzez menedżera dodatków.</p><p> +Obecnie zainstalowano następujące środowiska pracy:</p></body></html> Selectors - Selectors + Selektory Workbench selector items style - Workbench selector items style + Styl elementów selektora środowisk pracy Customizes how the items are displayed - Customizes how the items are displayed + Dostosuj sposób wyświetlania elementów Workbench selector type - Workbench selector type + Typ okienka wyboru środowiska pracy Choose the workbench selector widget type (restart required) - Choose the workbench selector widget type (restart required) + Wybierz typ widżetu selektora środowiska (wymagany restart) Startup - Startup + Uruchamianie Default workbench - Default workbench + Domyślne środowisko pracy Changes which workbench will be activated and shown after FreeCAD launches - Changes which workbench will be activated and shown -after FreeCAD launches + Zmienia, które środowisko pracy zostanie aktywowane i wyświetlone po uruchomieniu programu FreeCAD. Remembers which workbench is active for each tab of the viewport - Remembers which workbench is active for each tab of the viewport + Zapamiętuje, które środowisko pracy jest aktywne dla każdej karty widoku. @@ -10464,7 +10527,7 @@ after FreeCAD launches Choose Orientation - Choose Orientation + Wybierz orientację @@ -10517,7 +10580,7 @@ after FreeCAD launches Image Plane Settings - Image Plane Settings + Ustawienia płaszczyzny obrazu @@ -10542,12 +10605,12 @@ after FreeCAD launches X distance - X distance + Odległość X Y distance - Y distance + Odległość Y @@ -10562,7 +10625,7 @@ after FreeCAD launches Image Size - Image Size + Rozmiar obrazka @@ -10577,7 +10640,8 @@ after FreeCAD launches Scales the image interactively by setting a length between two points of the image - Scales the image interactively by setting a length between two points of the image + Skaluje obraz interaktywnie, +ustawiając długość pomiędzy dwoma punktami obrazu @@ -10610,22 +10674,22 @@ after FreeCAD launches Toggles the visibility of %1 in the available workbenches - Toggles the visibility of %1 in the available workbenches + Przełącza widoczność %1 w dostępnych środowiskach pracy This is the current startup module, and must be enabled - This is the current startup module, and must be enabled + Jest to aktualny moduł startowy i musi być włączany Shortcut to activate this workbench - Shortcut to activate this workbench + Skrót do aktywacji tego środowiska pracy Loads %1 automatically when FreeCAD starts - Loads %1 automatically when FreeCAD starts + Ładuje %1 automatycznie, podczas uruchamiania programu FreeCAD @@ -10653,7 +10717,7 @@ after FreeCAD launches Sort Alphabetically - Sort Alphabetically + Sortuj alfabetycznie @@ -10671,7 +10735,7 @@ after FreeCAD launches Icon and text - Icon and text + Ikonka i tekst @@ -10696,7 +10760,7 @@ after FreeCAD launches Delete User Notifications - Delete User Notifications + Usuń powiadomienia użytkownika @@ -10709,7 +10773,7 @@ after FreeCAD launches Delete User Notifications - Delete User Notifications + Usuń powiadomienia użytkownika @@ -10732,17 +10796,17 @@ after FreeCAD launches Fit to Window - Fit to Window + Dopasuj do okna Zoom In - Zoom In + Przybliż Zoom Out - Zoom Out + Oddal @@ -10750,7 +10814,7 @@ after FreeCAD launches &Load Image… - &Load Image… + &Wczytaj obraz … @@ -10763,7 +10827,7 @@ after FreeCAD launches Movable Navigation Cube - Movable Navigation Cube + Ruchoma kostka nawigacyjna @@ -10858,22 +10922,22 @@ after FreeCAD launches Tab size - Tab size + Rozmiar tabulacji Indent size - Indent size + Rozmiar wcięcia Display Items - Display Items + Wyświetl elementy Family - Family + Rodzina @@ -11079,7 +11143,7 @@ Może być zastąpiony przez określenie systemu jednostek projektu. Language and Number Format - Language and Number Format + Język i format liczb @@ -11089,7 +11153,7 @@ Może być zastąpiony przez określenie systemu jednostek projektu. Default unit system - Default unit system + Domyślny układ jednostek @@ -11099,26 +11163,25 @@ Może być zastąpiony przez określenie systemu jednostek projektu. Ignores document unit systems - Ignores document unit systems + Ignoruje układ jednostek z dokumentu Minimum fractional inch - Minimum fractional inch + Najmniejszy ułamek cala Number format - Number format + Format liczb Substitutes numerical keypad decimal separator with locale separator, except in the Python console and the macro editor where a dot/period will always be printed - Substitutes numerical keypad decimal separator with locale separator, except -in the Python console and the macro editor where a -dot/period will always be printed + Znak separatora dziesiętnego klawiatury numerycznej zostanie zastąpiony separatorem z ustawień lokalnych, +z wyjątkiem konsoli Python i edytora makrodefinicji, gdzie zawsze będzie wpisywany znak kropki / przecinka. @@ -11128,22 +11191,23 @@ dot/period will always be printed Customize the appearance of the user interface - Customize the appearance of the user interface + Dostosuj wygląd interfejsu użytkownika Looking for more themes? You can obtain them using the <a href="freecad:Std_AddonMgr">Addon Manager</a>. - Looking for more themes? You can obtain them using the <a href="freecad:Std_AddonMgr">Addon Manager</a>. + Szukasz więcej motywów? +Możesz je otrzymać za pomocą <a href="freecad:Std_AddonMgr">Menedżera dodatków</a>. Size of toolbar icons - Size of toolbar icons + Rozmiar ikonek paska narzędzi Icon size in the toolbar - Icon size in the toolbar + Rozmiar ikonki na pasku narzędzi @@ -11151,20 +11215,20 @@ dot/period will always be printed 'Combined': combine tree and property view into one panel. 'Independent': split tree and property view into separate panels. - Customize how the tree view is shown in the panel (restart required). + Dostosuj sposób wyświetlania widoku drzewa w panelu (wymagane ponowne uruchomienie). -'Combined': combine tree and property view into one panel. -'Independent': split tree and property view into separate panels. +"Połączony": połączenie widoku drzewa i widoku właściwości w jeden panel. +"Niezależny": rozdzielenie widoku drzewa i widoku właściwości na osobne panele. Size of recent file list - Size of recent file list + Rozmiar listy ostatnio używanych plików Background of the main window (when no document is opened) will consist of tiles of an image. - Background of the main window (when no document is opened) will consist of tiles of an image. + Tło głównego okna (gdy dokument nie jest otwarty) będzie składać się z kafelek obrazu. @@ -11186,39 +11250,39 @@ dot/period will always be printed A splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen. - A splash screen is a small loading window that is shown -when FreeCAD is launching. If this option is checked, FreeCAD will -display the splash screen. + Ekran powitalny to małe okno postępu ładowania, które jest wyświetlane +podczas uruchamiania FreeCAD. Jeśli ta opcja jest zaznaczona, FreeCAD +wyświetli ekran powitalny. Enable splash screen at start-up - Enable splash screen at start-up + Włącz ekran powitalny przy uruchamianiu Activate overlay handling of docked panels - Activate overlay handling of docked panels + Aktywuj obsługę nakładki paneli zadokowanych Activate overlay panels - Activate overlay panels + Aktywuj nakładki paneli Preference Packs - Preference Packs + Pakiety preferencji Import Configuration - Import Configuration + Importuj konfigurację Save as New - Save as New + Zapisz jako nowy @@ -11228,7 +11292,7 @@ display the splash screen. Revert - Revert + Przywróć @@ -11303,7 +11367,7 @@ display the splash screen. Applies the %1 preference pack - Applies the %1 preference pack + Stosuje paczkę preferencji %1 @@ -11326,7 +11390,7 @@ display the splash screen. Report View - Report View + Widok raportu @@ -11459,7 +11523,7 @@ wyświetlone na ekranie podczas wyświetlania komunikatu dziennika Python Interpreter - Python Interpreter + Interpreter Python @@ -11522,42 +11586,42 @@ z konsoli Python do panelu Widoku Raportu Pushes in - Pushes in + Przybliż Pulls out - Pulls out + Oddal Main light - Main light + Główne światło Backlight - Backlight + Podświetlenie Vertical angle - Vertical angle + Kąt pionowy Horizontal angle - Horizontal angle + Kąt poziomy Fill light - Fill light + Oświetlenie przednie Ambient light - Ambient light + Oświetlenie otoczenia @@ -11605,7 +11669,7 @@ Jeśli opcja jest wyłączona, pokazuje się po kliknięciu myszą. Automatically passes mouse wheel events through the transparent areas of an overlay panel - Automatically passes mouse wheel events through the transparent areas of an overlay panel + Automatycznie przekazuje zdarzenia kółka myszy przez przezroczyste obszary panelu nakładki @@ -11796,7 +11860,7 @@ Ustaw zero, aby wypełnić miejsce. Shows the property view, which displays the properties of the selected object. - Shows the property view, which displays the properties of the selected object. + Pokazuje widok właściwości, który wyświetla właściwości wybranego obiektu. @@ -11804,7 +11868,7 @@ Ustaw zero, aby wypełnić miejsce. Toggle Freeze - Toggle Freeze + Włącz / wyłącz zamrożenie @@ -11827,7 +11891,7 @@ gdy zmieniają się jego obiekty nadrzędne. &Reload Stylesheet - &Reload Stylesheet + &Przeładuj arkusz stylów @@ -11875,37 +11939,37 @@ gdy zmieniają się jego obiekty nadrzędne. Add a Property to %1 - Add a Property to %1 + Dodaj właściwość do %1 Invalid group name - Invalid group name + Nieprawidłowa nazwa grupy Invalid type name - Invalid type name + Nieprawidłowa nazwa typu Invalid property name '%1' - Invalid property name '%1' + Nieprawidłowa nazwa właściwości:"%1" Property '%1' already exists - Property '%1' already exists + Właściwość "%" już istnieje '%1' is a constant - '%1' is a constant + "%1" jest stałą '%1' is a unit - '%1' is a unit + "%1" jest jednostką @@ -11975,47 +12039,49 @@ gdy zmieniają się jego obiekty nadrzędne. Theme Customization - Theme Customization + Dostosowywanie motywu Customize the current theme. The offered settings are optional for theme developers so they may or may not have an effect in the current theme. - Customize the current theme. The offered settings are optional for theme developers so they may or may not have an effect in the current theme. + Dostosuj swój bieżący motyw. +Zaoferowane ustawienia są opcjonalne dla programistów motywów, więc mogą lub nie mieć wpływu na bieżący motyw. Style sheet (advanced) - Style sheet (advanced) + Arkusz stylów (opcje zaawansowane) Overlay style sheet - Overlay style sheet + Arkusz stylów nakładki Open Theme Editor - Open Theme Editor + Otwórz edytor motywu Tree View - Tree View + Widok drzewa Hide extra tree view column for internal names - Hide extra tree view column for internal names + Ukryj dodatkową kolumnę widoku drzewa z nazwami wewnętrznymi Hide internal names - Hide internal names + Ukryj wewnętrzne nazwy Displays an eye icon in front of the tree view items, showing their visibility status. When clicked the visibility is toggled. - Displays an eye icon in front of the tree view items, showing their visibility status. When clicked the visibility is toggled. + Wyświetla ikonkę oka przed elementami widoku drzewa, pokazując ich stan widoczności. +Po kliknięciu widoczność jest przełączana. @@ -12090,37 +12156,37 @@ gdy zmieniają się jego obiekty nadrzędne. Automatically hide overlaid dock panels when in non 3D view (e.g. TechDraw or Spreadsheet) - Automatically hide overlaid dock panels when in non 3D view (e.g. TechDraw or Spreadsheet) + Automatyczne ukrywanie nałożonych paneli dokujących w widoku innym niż 3D (np. Rysunku Technicznym lub Arkuszu kalkulacyjnym) Automatically hide in non-3D view - Automatically hide in non-3D view + Automatycznie ukryj w widoku innym niż 3D Automatically pass through of the mouse cursor - Automatically pass through of the mouse cursor + Automatyczne przepuszczanie kursora myszki Automatically passes mouse wheel events through the transparent areas of an overlay panel - Automatically passes mouse wheel events through the transparent areas of an overlay panel + Automatycznie przekazuje zdarzenia kółka myszy przez przezroczyste obszary panelu nakładki Automatically pass through of the mouse wheel - Automatically pass through of the mouse wheel + Automatyczne przekazywanie zdarzeń kółka myszki Suggested Actions - Suggested Actions + Sugerowane akcje Suggest actions in the task view based on the selection - Suggest actions in the task view based on the selection + Zaproponuj akcje w widoku zadania na podstawie wyboru @@ -12158,7 +12224,7 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Python &Modules Documentation - Python &Modules Documentation + Dokumentacja skryptów środowiska Python @@ -12228,7 +12294,7 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Opens the bugtracker to report an issue - Opens the bugtracker to report an issue + Otwiera bugtracker, aby zgłosić problem @@ -12241,7 +12307,7 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Transforms the selected object in the 3D view - Transforms the selected object in the 3D view + Przekształca zaznaczony obiekt w widoku 3D @@ -12254,7 +12320,7 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Coordinate system - Coordinate system + Układ współrzędnych @@ -12264,12 +12330,12 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Global coordinate system - Global coordinate system + Globalny układ współrzędnych Align dragger rotation with selected coordinate system - Align dragger rotation with selected coordinate system + Wyrównaj rotację przeciągania z wybranym układem współrzędnych @@ -12303,7 +12369,7 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Move to Other Object - Move to Other Object + Przenieś do innego obiektu @@ -12318,37 +12384,37 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: Match U/X - Match U/X + Dopasuj U/X Match V/Y - Match V/Y + Dopasuj V/Y Match W/Z - Match W/Z + Dopasuj W/Z Align U/X - Align U/X + Wyrównaj U/X Align V/Y - Align V/Y + Wyrównaj V/Y Align W/Z - Align W/Z + Wyrównaj W/Z Pick Reference - Pick Reference + Wybierz odniesienie @@ -12397,12 +12463,12 @@ W każdym wierszu muszą znajdować się 3 wartości oddzielone: PDF version - PDF version + Wersja PDF This is the PDF Version FreeCAD will use to export to PDF - This is the PDF Version FreeCAD will use to export to PDF + Jest to wersja PDF, której FreeCAD użyje do wykonania eksportu @@ -12463,7 +12529,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Center of mass / centroid - Center of mass / centroid + Środek ciężkości / środek geometryczny @@ -12483,17 +12549,17 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Pick Reference - Pick Reference + Wybierz odniesienie Move to Other Object - Move to Other Object + Przenieś do innego obiektu Select face, edge, or vertex… - Select face, edge, or vertex… + Wybierz ścianę, krawędź lub wierzchołek … @@ -12526,13 +12592,13 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Esc Keyboard key for Escape - Esc + Esc Tab ⭾ Keyboard key for Tab - Tab ⭾ + Tab ⭾ @@ -12592,67 +12658,67 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa ⇧ Shift Keyboard key for Shift on Windows & Linux - ⇧ Shift + ⇧ Shift Num0 Keyboard key for numpad 0 - Num0 + Num 0 Num1 Keyboard key for numpad 1 - Num1 + Num 1 Num2 Keyboard key for numpad 2 - Num2 + Num 2 Num3 Keyboard key for numpad 3 - Num3 + Num 3 Num4 Keyboard key for numpad 4 - Num4 + Num 4 Num5 Keyboard key for numpad 5 - Num5 + Num 5 Num6 Keyboard key for numpad 6 - Num6 + Num 6 Num7 Keyboard key for numpad 7 - Num7 + Num 7 Num8 Keyboard key for numpad 8 - Num8 + Num 8 Num9 Keyboard key for numpad 9 - Num9 + Num 9 @@ -12695,7 +12761,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Press Ctrl and middle mouse button - Press Ctrl and middle mouse button + Naciśnij klawisz CTRL i środkowy przycisk myszki @@ -12728,7 +12794,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Angle snap - Angle snap + Przyciąganie do kąta @@ -12736,7 +12802,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Theme Editor - Theme Editor + Edytor motywów @@ -12751,22 +12817,22 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa RadioButton - RadioButton + Przycisk opcji Item 1 - Item 1 + Element 1 Item 2 - Item 2 + Element 2 PushButton - PushButton + Przycisk polecenia @@ -12784,7 +12850,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa DOF - DOF + stopnie swobody @@ -12794,7 +12860,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Forces the recomputation of the active document - Forces the recomputation of the active document + Wymusza przeliczenie aktywnego dokumentu @@ -12807,22 +12873,22 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Built-in Parameters - Built-in Parameters + Parametry wbudowane Theme Parameters - Theme Parameters + Parametry motywu Theme Parameters - Fallback - Theme Parameters - Fallback + Parametry motywu – wartość domyślna User Parameters - User Parameters + Parametr użytkownika @@ -12830,7 +12896,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Wait until the auto-recovery file has been saved… - Wait until the auto-recovery file has been saved… + Poczekaj, aż plik automatycznego odzyskiwania zostanie zapisany … @@ -12838,12 +12904,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Dependency Gra&ph - Dependency Gra&ph + Gra&f zależności Shows the dependency graph of the objects in the active document - Shows the dependency graph of the objects in the active document + Pokazuje wykres zależności obiektów w aktywnym dokumencie @@ -12851,7 +12917,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Dependency Graph - Dependency Graph + Graf zależności @@ -12859,12 +12925,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Export Dependency &Graph - Export Dependency &Graph + Eksportuj &wykres zależności Exports the dependency graph as a Graphviz (.gv) file - Exports the dependency graph as a Graphviz (.gv) file + Eksportuje wykres zależności jako plik Graphviz (.gv) @@ -12872,12 +12938,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Save &As… - Save &As… + Zapisz &jako Saves the active document under a new file name - Saves the active document under a new file name + Zapisuje aktywny dokument pod nową nazwą @@ -12885,12 +12951,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Save Cop&y - Save Cop&y + Zapisz &kopię Saves a copy of the active document under a new file name - Saves a copy of the active document under a new file name + Zapisuje kopię aktywnego dokumentu pod nową nazwą @@ -12898,17 +12964,17 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Revert Document - Revert Document + Przywróć dokument This will discard all the changes since the last file save. - This will discard all the changes since the last file save. + Spowoduje to odrzucenie wszystkich zmian od ostatniego zapisu pliku. Continue? - Continue? + Kontynuować? @@ -12916,12 +12982,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Doc&ument Information - Doc&ument Information + Informacje o dok&umencie Shows information about the active document - Shows information about the active document + Pokazuje informacje o aktywnym dokumencie @@ -12929,12 +12995,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Do&cument Utility - Do&cument Utility + Narzędzie do&kumentu Extracts or creates document files - Extracts or creates document files + Wyodrębnia lub tworzy pliki dokumentów @@ -12942,12 +13008,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa &Print - &Print + &Drukuj Prints the active document - Prints the active document + Drukuje aktywny dokument @@ -12955,12 +13021,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Print Previe&w - Print Previe&w + Podgląd &wydruku Previews the active document before printing - Previews the active document before printing + Wyświetla aktywny dokument przed drukowaniem @@ -12968,12 +13034,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Export P&DF - Export P&DF + Eksportuj do formatu P&DF Exports the active document as a PDF file - Exports the active document as a PDF file + Eksportuje aktywny dokument jako plik PDF @@ -12981,12 +13047,12 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Duplicate Selecti&on - Duplicate Selecti&on + Powiel &zaznaczone Duplicates the selected objects to the active document - Duplicates the selected objects to the active document + Umieszcza kopie wybranych obiektów w aktywnym dokumencie @@ -12999,7 +13065,7 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Recomputes the active document - Recomputes the active document + Przelicza aktywny dokument @@ -13010,10 +13076,10 @@ Należy jednak pamiętać, że niektóre funkcje interaktywne mogą nie działa Check the report view for more details. Proceed? - The document contains dependency cycles. -Check the report view for more details. + Dokument zawiera cykle zależności. +Sprawdź widok raportu, aby uzyskać więcej informacji. -Proceed? +Kontynuować? @@ -13026,7 +13092,7 @@ Proceed? Transforms the selected object - Transforms the selected object + Przekształca zaznaczony obiekt @@ -13034,12 +13100,12 @@ Proceed? P&lacement - P&lacement + U&miejscowienie Opens the placement editor to adjust the placement of the selected object - Opens the placement editor to adjust the placement of the selected object + Otwiera edytor umiejscowienia, aby zmienić powiązanie wybranego obiektu. @@ -13047,12 +13113,12 @@ Proceed? Ali&gn To… - Ali&gn To… + Wyró&wnaj do … Aligns the selected objects - Aligns the selected objects + Wyrównuje zaznaczone obiekty @@ -13060,12 +13126,12 @@ Proceed? Random &Color - Random &Color + &Kolor losowo Assigns random diffuse colors for the selected objects - Assigns random diffuse colors for the selected objects + Przypisuje wybranym obiektom losowe kolory powierzchni. @@ -13073,12 +13139,12 @@ Proceed? Skip Recomputes - Skip Recomputes + Pomiń przeliczanie Enables or disables the recomputations of the document - Enables or disables the recomputations of the document + Włącza lub wyłącza ponowne przeliczenie dokumentu @@ -13086,12 +13152,12 @@ Proceed? Link Group - Link Group + Grupa łączy Creates a group of links - Creates a group of links + Tworzy grupę łączy @@ -13099,12 +13165,14 @@ Proceed? Make Link - Make Link + Utwórz łącze A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. - A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. + Łącze to obiekt, który odnosi się lub łączy z innym obiektem w tym samym dokumencie +lub w innym dokumencie. W przeciwieństwie do klonów Łącza odnoszą się bezpośrednio do oryginalnego kształtu, +co czyni je bardziej efektywnymi pod względem pamięciowym, co pomaga w tworzeniu złożonych zespołów. @@ -13112,12 +13180,12 @@ Proceed? Make Sub-Link - Make Sub-Link + Utwórz łącze względne Creates a sub-object or sub-element link - Creates a sub-object or sub-element link + Tworzy obiekt zależny lub łącze do elementu podrzędnego @@ -13125,12 +13193,12 @@ Proceed? Replace With Link - Replace With Link + Zastąp przez łącze Replaces the selected objects with links - Replaces the selected objects with links + Zastępuje zaznaczone obiekty łączem @@ -13138,12 +13206,12 @@ Proceed? Import Links - Import Links + Importuj łącza Imports selected external links - Imports selected external links + Importuje wybrane łącza zewnętrzne @@ -13151,12 +13219,12 @@ Proceed? Import All Links - Import All Links + Importuj wszystkie łącza Imports all links of the active document - Imports all links of the active document + Importuje wszystkie łącza aktywnego dokumentu @@ -13164,12 +13232,12 @@ Proceed? &Go to Linked Object - &Go to Linked Object + &Przejdź do połączonego obiektu Selects the linked object and switches to its original document - Selects the linked object and switches to its original document + Wybiera połączony obiekt i przełącza się na dokument źródłowy @@ -13177,12 +13245,12 @@ Proceed? Go to &Deepest Linked Object - Go to &Deepest Linked Object + Przejdź do &najgłębiej połączonego obiektu Selects the deepest linked object and switches to its original document - Selects the deepest linked object and switches to its original document + Wybiera najgłębszy połączony obiekt i przełącza się do dokumentu źródłowego @@ -13190,12 +13258,12 @@ Proceed? Select &All Links - Select &All Links + Wybierz &wszystkie linki Selects all links to the current selected object - Selects all links to the current selected object + Zaznacza wszystkie łącza dla aktualnie wybranego obiektu @@ -13203,12 +13271,12 @@ Proceed? Link Actions - Link Actions + Akcje z łączami Commands that operate on link objects - Commands that operate on link objects + Polecenia, które działają na obiektach łączy @@ -13216,12 +13284,12 @@ Proceed? Ma&cros - Ma&cros + Ma&krodefinicje Opens a dialog to execute a recorded macro - Opens a dialog to execute a recorded macro + Otwiera okno dialogowe umożliwiające uruchomienie nagranego makra @@ -13229,12 +13297,12 @@ Proceed? &Execute Macro - &Execute Macro + &Wykonaj makrodefinicję Executes the macro in the editor - Executes the macro in the editor + Wykonuje makrodefinicję w edytorze @@ -13242,12 +13310,12 @@ Proceed? &Attach to Remote Debugger - &Attach to Remote Debugger + &Przełącz na debugger zewnętrzny Attaches to a remotely running debugger - Attaches to a remotely running debugger + Przełącza do debuggera działającego zdalnie @@ -13255,12 +13323,12 @@ Proceed? &Debug Macro - &Debug Macro + &Debugowanie makrodefinicji Starts the debugging of macros - Starts the debugging of macros + Rozpoczyna debugowanie makrodefinicji @@ -13268,12 +13336,12 @@ Proceed? &Stop Debugging - &Stop Debugging + &Zatrzymaj debugowanie Stops the debugging of macros - Stops the debugging of macros + Zatrzymuje debugowanie makrodefinicji @@ -13281,12 +13349,12 @@ Proceed? Step &Over - Step &Over + Krok &dalej Steps to the next line in this file - Steps to the next line in this file + Krok do następnej linii w tym pliku @@ -13294,12 +13362,12 @@ Proceed? Step &Into - Step &Into + Krok d&o Steps to the next line executed - Steps to the next line executed + Przechodzi do następnej wykonywanej linii @@ -13307,12 +13375,12 @@ Proceed? Toggle &Breakpoint - Toggle &Breakpoint + Przełącz punkt &przerwania Adds or removes a breakpoint at this position - Adds or removes a breakpoint at this position + Dodaje lub usuwa punkt wstrzymania na tej pozycji @@ -13320,7 +13388,7 @@ Proceed? Open Macro Folder - Open Macro Folder + Otwórz katalog makrodefinicji @@ -13333,12 +13401,12 @@ Proceed? &Recent Macros - &Recent Macros + &Ostatnio użyte makrodefinicje Displays the list of recently used macros - Displays the list of recently used macros + Wyświetla listę ostatnio używanych makrodefinicji @@ -13346,12 +13414,12 @@ Proceed? E&dit Parameters - E&dit Parameters + E&dycja parametrów Opens a dialog to edit the parameters - Opens a dialog to edit the parameters + Otwiera okno dialogowe do edycji parametrów @@ -13359,12 +13427,12 @@ Proceed? Prefere&nces - Prefere&nces + &Preferencje Opens a dialog to edit the preferences - Opens a dialog to edit the preferences + Otwiera okno dialogowe do edycji preferencji @@ -13372,12 +13440,12 @@ Proceed? Cu&stomize… - Cu&stomize… + Do&stosuj … Opens a dialog to edit toolbars, shortcuts, and macros - Opens a dialog to edit toolbars, shortcuts, and macros + Otwiera okno dialogowe do edycji paska narzędzi, skrótów i makr @@ -13385,12 +13453,12 @@ Proceed? Command &Line - Command &Line + Wiersz po&leceń Opens a command line interface in the console - Opens a command line interface in the console + Otwiera interfejs wiersza poleceń w konsoli @@ -13398,12 +13466,12 @@ Proceed? Donate to FreeCA&D - Donate to FreeCA&D + Wspomóż FreeCA&D Support the FreeCAD development - Support the FreeCAD development + Wesprzyj rozwój FreeCAD @@ -13411,12 +13479,12 @@ Proceed? Developers Handbook - Developers Handbook + Podręcznik dla programistów Handbook about FreeCAD development - Handbook about FreeCAD development + Podręcznik na temat rozwoju FreeCAD @@ -13424,12 +13492,12 @@ Proceed? Te&xt Document - Te&xt Document + Dodaj dokument testowy Adds a text document to the active document - Adds a text document to the active document + Dodaje dokument tekstowy do aktywnego dokumentu @@ -13437,12 +13505,12 @@ Proceed? &Units Converter - &Units Converter + &Przelicznik jednostek Starts the units converter - Starts the units converter + Uruchamia konwerter jednostek @@ -13450,12 +13518,12 @@ Proceed? Edit &Mode - Edit &Mode + Tryb e&dycji Defines behavior when editing an object from the tree view - Defines behavior when editing an object from the tree view + Definiuje zachowanie podczas edycji obiektu w widoku drzewa @@ -13463,12 +13531,13 @@ Proceed? New Part - New Part + Nowa część Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. - Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. + Tworzy część, która jest kontenerem ogólnego przeznaczenia służącym do przechowywania grupy obiektów tak, aby działały jako całość w widoku 3D. +Służy do rozmieszczania obiektów, które mają kształt topologiczny, takich jak bryły pierwotne środowiska Część, obiekty Zawartości środowiska Projekt Części i inne części. @@ -13481,7 +13550,7 @@ Proceed? Creates a group, which is a general-purpose container to group objects in the tree view, regardless of their data type. It is a simple folder to organize the objects in a model. - Creates a group, which is a general-purpose container to group objects in the tree view, regardless of their data type. It is a simple folder to organize the objects in a model. + Tworzy grupę, która jest kontenerem ogólnego przeznaczenia do grupowania obiektów w Widoku drzewa, niezależnie od ich typu danych. To zwykły katalog do organizacji obiektów w modelu. @@ -13489,12 +13558,12 @@ Proceed? Variable Set - Variable Set + Zestaw zmiennych Creates a variable set, which is an object that maintains a set of properties to be used as variables - Creates a variable set, which is an object that maintains a set of properties to be used as variables + Tworzy zestaw zmiennych będący obiektem, który przechowuje zestaw właściwości używanych jako zmienne @@ -13502,12 +13571,12 @@ Proceed? Save Current Camera - Save Current Camera + Zapisz aktualne ujęcie widoku Saves the current camera settings - Saves the current camera settings + Zapisuje bieżące ustawienia ujęcia widoku @@ -13515,12 +13584,12 @@ Proceed? Restore Saved Camera - Restore Saved Camera + Przywróć zapisane ujęcie widoku Restores the saved camera settings - Restores the saved camera settings + Przywraca zapisane ustawienia ujęcia widoku @@ -13528,12 +13597,12 @@ Proceed? Clippin&g View - Clippin&g View + Wido&k przecięcia Toggles clipping of the active view - Toggles clipping of the active view + Przełącza płaszczyznę przecinania dla aktywnego widoku @@ -13541,12 +13610,12 @@ Proceed? &Draw Style - &Draw Style + &Styl kreślenia Changes the draw style of the objects - Changes the draw style of the objects + Zmienia styl rysowania obiektów @@ -13554,12 +13623,12 @@ Proceed? Toggle &Visibility - Toggle &Visibility + Przełącz &widoczność Toggles the visibility of the selection - Toggles the visibility of the selection + Włącza / wyłącza widoczność wybranego elementu @@ -13567,12 +13636,13 @@ Proceed? Toggle Transparenc&y - Toggle Transparenc&y + Przełącz p&rzezroczystość Toggles the transparency of the selected objects. Transparency can be fine-tuned in the appearance task dialog - Toggles the transparency of the selected objects. Transparency can be fine-tuned in the appearance task dialog + Włącza / wyłącza przezroczystość zaznaczonych obiektów. +Przejrzystość może być dopasowana w oknie wyświetlania zadań. @@ -13580,12 +13650,12 @@ Proceed? Toggle Se&lectability - Toggle Se&lectability + Przełącz m&ożliwość zaznaczenia Toggles the property of the objects to get selected in the 3D view - Toggles the property of the objects to get selected in the 3D view + Przełącza właściwość obiektów, które mają zostać wybrane w widoku 3D @@ -13593,12 +13663,12 @@ Proceed? Sho&w Selection - Sho&w Selection + &Pokaż zaznaczone Shows all selected objects - Shows all selected objects + Wyświetla wszystkie zaznaczone obiekty @@ -13606,12 +13676,12 @@ Proceed? &Hide Selection - &Hide Selection + &Ukryj zaznaczone Hides all selected objects - Hides all selected objects + Ukrywa wszystkie zaznaczone obiekty @@ -13619,12 +13689,12 @@ Proceed? &Select Visible Objects - &Select Visible Objects + &Wybierz widoczne obiekty Selects all visible objects in the active document - Selects all visible objects in the active document + Zaznacza wszystkie widoczne obiekty aktywnego dokumentu @@ -13632,12 +13702,12 @@ Proceed? To&ggle All Objects - To&ggle All Objects + Prz&ełącz widoczność wszystkich obiektów Toggles the visibility of all objects in the active document - Toggles the visibility of all objects in the active document + Przełącza widoczność wszystkich obiektów aktywnego dokumentu @@ -13645,12 +13715,12 @@ Proceed? Show &All Objects - Show &All Objects + Wyświetl &wszystkie obiekty Shows all objects in the document - Shows all objects in the document + Pokazuje wszystkie obiekty w dokumencie @@ -13658,12 +13728,12 @@ Proceed? Hide All &Objects - Hide All &Objects + Ukryj wszystkie &obiekty Hides all objects in the document - Hides all objects in the document + Ukrywa wszystkie obiekty w dokumencie @@ -13671,12 +13741,12 @@ Proceed? Rotates &Right - Rotates &Right + Obróć w &prawo Rotates the view by 90° clockwise - Rotates the view by 90° clockwise + Obraca widok o 90° w prawo @@ -13684,12 +13754,12 @@ Proceed? &Fit All - &Fit All + &Dopasuj wszystko Fits all content into the 3D view - Fits all content into the 3D view + Dopasuje całą zawartość do rozmiaru okna widoku 3D @@ -13697,12 +13767,12 @@ Proceed? Fit &Selection - Fit &Selection + Dopasuj do wy&boru Fits the selected content into the 3D view - Fits the selected content into the 3D view + Dopasuje wybraną zawartość do rozmiaru okna widoku 3D @@ -13710,12 +13780,12 @@ Proceed? Standard &Views - Standard &Views + Widoki &standardowe Changes to a standard view - Changes to a standard view + Zmienia widoki standardowe @@ -13723,12 +13793,12 @@ Proceed? D&ocument Window - D&ocument Window + Okn&o dokumentu Displays the active view either in fullscreen, undocked, or docked mode - Displays the active view either in fullscreen, undocked, or docked mode + Wyświetla aktywny widok w trybie pełnoekranowym, oddokowanym lub zadokowanym @@ -13736,12 +13806,12 @@ Proceed? FreeCAD VR - FreeCAD VR + FreeCAD VR Extends the FreeCAD 3D Window to a VR device - Extends the FreeCAD 3D Window to a VR device + Rozszerza okno 3D FreeCAD na urządzenie VR @@ -13749,12 +13819,12 @@ Proceed? New 3D View - New 3D View + Nowy widok 3D Opens a new 3D view window for the active document - Opens a new 3D view window for the active document + Otwiera nowe okno widoku 3D dla aktywnego dokumentu @@ -13762,12 +13832,12 @@ Proceed? Toggle Navigation/&Edit Mode - Toggle Navigation/&Edit Mode + Przełącz tryb nawigacja / &edycja Toggles between navigation and edit mode - Toggles between navigation and edit mode + Przełącza pomiędzy trybem nawigacji i edycji @@ -13775,12 +13845,12 @@ Proceed? Toggle A&xis Cross - Toggle A&xis Cross + Włącz / wyłącz krz&yż osi Toggles the axis cross at the origin - Toggles the axis cross at the origin + Włącza / wyłącza krzyż osi w punkcie zerowym @@ -13788,12 +13858,12 @@ Proceed? Inventor Example #3 - Inventor Example #3 + Przykład Inventor #3 Shows an animated texture - Shows an animated texture + Pokazuje animowaną teksturę @@ -13801,12 +13871,12 @@ Proceed? Stereo Re&d/Cyan - Stereo Re&d/Cyan + Stereo czer&wony / cyjan Switches stereo viewing to red/cyan - Switches stereo viewing to red/cyan + Przełącza oglądanie stereo na czerwony / cyjan @@ -13814,12 +13884,12 @@ Proceed? Stereo &Quad Buffer - Stereo &Quad Buffer + Poczwórny &bufor stereo Switches stereo viewing to quad buffer - Switches stereo viewing to quad buffer + Przełącza widok stereo na bufor poczwórny @@ -13827,12 +13897,12 @@ Proceed? Issue Camera &Position - Issue Camera &Position + Pokaż pozycję &ujęcia widoku Issues the camera position to the console and to a macro, to easily recall this position - Issues the camera position to the console and to a macro, to easily recall this position + Wysyłaj dane pozycji ujęcia widoku do konsoli i do makra, aby łatwo przywołać tę pozycję @@ -13840,12 +13910,12 @@ Proceed? &Box Zoom - &Box Zoom + &Powiększ obszarem Activates the box zoom tool - Activates the box zoom tool + Aktywuje narzędzie powiększenia obszaru @@ -13853,12 +13923,12 @@ Proceed? &Box Selection - &Box Selection + &Zaznacz obszarem Activates the box selection tool - Activates the box selection tool + Aktywuje narzędzie zaznaczania obszaru @@ -13866,12 +13936,12 @@ Proceed? Bo&x Element Selection - Bo&x Element Selection + Wy&bór elementów ramką zaznaczenia Activates box element selection - Activates box element selection + Aktywuje wybór elementów ramką zaznaczenia @@ -13879,12 +13949,12 @@ Proceed? &Go to Selection - &Go to Selection + &Przejdź do zaznaczenia Scrolls to the first selected item - Scrolls to the first selected item + Przewija do pierwszego zaznaczonego elementu @@ -13892,12 +13962,12 @@ Proceed? Collapse Selected Items - Collapse Selected Items + Zwiń zaznaczone elementy Collapses the currently selected tree items - Collapses the currently selected tree items + Zwija aktualnie wybrane elementy drzewa @@ -13905,12 +13975,12 @@ Proceed? Expand Selected Items - Expand Selected Items + Rozwiń zaznaczone elementy Expands the currently selected tree items - Expands the currently selected tree items + Rozwija aktualnie wybrane elementy drzewa @@ -13918,12 +13988,12 @@ Proceed? Select All Instances - Select All Instances + Wybierz wszystkie wystąpienia Selects all instances of the currently selected object - Selects all instances of the currently selected object + Zaznacza wszystkie wystąpienia w aktualnie wybranym obiekcie @@ -13931,12 +14001,12 @@ Proceed? Scene I&nspector - Scene I&nspector + I&nspektor sceny Opens the scene inspector - Opens the scene inspector + Otwiera inspektora sceny @@ -13944,12 +14014,12 @@ Proceed? Text&ure Mapping - Text&ure Mapping + Odwzorowanie tekst&ur Maps textures to shapes - Maps textures to shapes + Mapuje tekstury na kształtach @@ -13957,12 +14027,12 @@ Proceed? View &Turntable - View &Turntable + Widok &obrotowy Opens a turntable view - Opens a turntable view + Otwiera widok obrotowy @@ -13970,12 +14040,13 @@ Proceed? Selection &Back - Selection &Back + &Cofnij zaznaczenie Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. - Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. + Przywraca poprzednie zaznaczenie w Widoku drzewa. +Działa tylko wtedy, gdy włączony jest tryb zapisu zaznaczania w drzewku. @@ -13983,12 +14054,13 @@ Proceed? Selection &Forward - Selection &Forward + P&onów zaznaczenie Restores the next tree view selection. Only works if tree RecordSelection mode is switched on. - Restores the next tree view selection. Only works if tree RecordSelection mode is switched on. + Ponawia wybór w Widoku drzewa. +Działa tylko wtedy, gdy włączony jest tryb zapisu zaznaczania w drzewku. @@ -13996,12 +14068,12 @@ Proceed? &Single Document - &Single Document + &Pojedynczy dokument Displays only the active document in the tree view - Displays only the active document in the tree view + Wyświetla tylko aktywny dokument w widoku drzewa @@ -14009,12 +14081,12 @@ Proceed? &Multi Document - &Multi Document + &Wiele dokumentów Displays all documents in the tree view - Displays all documents in the tree view + Wyświetla wszystkie dokumenty w widoku drzewa @@ -14022,12 +14094,12 @@ Proceed? &1 Sync View - &1 Sync View + &1 Synchronizuj widok Switches to the 3D view containing the selected item from the tree view - Switches to the 3D view containing the selected item from the tree view + Przełącza do okna widoku 3D zawierającego zaznaczony element z drzewa @@ -14035,12 +14107,12 @@ Proceed? &2 Sync Selection - &2 Sync Selection + &2 Synchronizuj wybrane Expands the tree item when the corresponding object is selected in the 3D view - Expands the tree item when the corresponding object is selected in the 3D view + Automatycznie rozwinie drzewko, gdy odpowiedni obiekt jest zaznaczony w oknie widoku 3D @@ -14048,12 +14120,12 @@ Proceed? &3 Sync Placement - &3 Sync Placement + &3 Synchronizuj położenie Adjusts the placement on drag-and-drop of objects across coordinate systems (e.g. in part containers) - Adjusts the placement on drag-and-drop of objects across coordinate systems (e.g. in part containers) + Dostosowuje położenie przy przeciąganiu i upuszczaniu obiektów między układami współrzędnych (np. w kontenerach części) @@ -14061,12 +14133,12 @@ Proceed? &5 Record Selection - &5 Record Selection + &5 Zapisz zaznaczenie Records the selection in the tree view in order to go back/forward using the navigation buttons - Records the selection in the tree view in order to go back/forward using the navigation buttons + Zapisuje zaznaczenie w widoku drzewa, aby cofnąć / ponowić za pomocą przycisku nawigacji @@ -14074,12 +14146,12 @@ Proceed? Initiate &Dragging - Initiate &Dragging + Rozpocznij p&rzeciąganie Initiates dragging of the currently selected tree items - Initiates dragging of the currently selected tree items + Rozpoczyna przeciąganie aktualnie wybranych elementów drzewa @@ -14087,12 +14159,12 @@ Proceed? Tree View Actions - Tree View Actions + Akcje Widoku drzewa Tree view behavior options and actions - Tree view behavior options and actions + Opcje i akcje na Widoku drzewa @@ -14100,12 +14172,12 @@ Proceed? &Bounding Box - &Bounding Box + &Ramka otaczająca Shows selection bounding box - Shows selection bounding box + Pokazuje ramkę otaczającą znaczenia @@ -14113,12 +14185,12 @@ Proceed? Toggle Overl&ay for All Panels - Toggle Overl&ay for All Panels + Włącz/wyłącz n&akładkę dla wszystkich paneli Toggled overlay mode for all docked panels - Toggled overlay mode for all docked panels + Przełącz tryb nakładki dla wszystkich zadokowanych okien @@ -14126,14 +14198,14 @@ Proceed? Toggle Tra&nsparent Panels - Toggle Tra&nsparent Panels + Włącz / wyłącz tra&nsparentność paneli Toggles transparent mode for all docked overlay panels. This makes the docked panels stay transparent at all times. - Toggles transparent mode for all docked overlay panels. -This makes the docked panels stay transparent at all times. + Przełącza tryb przezroczystości dla wszystkich zadokowanych paneli nakładki. +Dzięki temu zadokowane panele pozostaną przezroczyste przez cały czas. @@ -14141,12 +14213,12 @@ This makes the docked panels stay transparent at all times. Toggle &Overlay - Toggle &Overlay + Włącz / wyłącz &nakładkę Toggles overlay mode for the docked window under the cursor - Toggles overlay mode for the docked window under the cursor + Przełącza tryb nakładki dla zadokowanego okna pod kursorem @@ -14154,14 +14226,14 @@ This makes the docked panels stay transparent at all times. Toggle Tran&sparent Mode - Toggle Tran&sparent Mode + Włącz / wyłącz tryb transparentności Toggles transparent mode for the docked panel under cursor. This makes the docked panel stay transparent at all times. - Toggles transparent mode for the docked panel under cursor. -This makes the docked panel stay transparent at all times. + Przełącza tryb transparentności dla panelu zadokowanego pod kursorem. +Dzięki temu zadokowany panel pozostanie przezroczysty przez cały czas. @@ -14169,12 +14241,12 @@ This makes the docked panel stay transparent at all times. Toggle &Left - Toggle &Left + Przełącz &lewy Toggles the visibility of the left overlay panel - Toggles the visibility of the left overlay panel + Przełącza widoczność lewego panelu nakładek @@ -14182,12 +14254,12 @@ This makes the docked panel stay transparent at all times. Toggle &Right - Toggle &Right + Przełącz &prawy Toggles the visibility of the right overlay panel - Toggles the visibility of the right overlay panel + Przełącza widoczność prawego panelu nakładek @@ -14195,12 +14267,12 @@ This makes the docked panel stay transparent at all times. Toggle &Top - Toggle &Top + Przełącz &górę Toggles the visibility of the top overlay panel - Toggles the visibility of the top overlay panel + Przełącza widoczność górnego panelu nakładek @@ -14208,12 +14280,12 @@ This makes the docked panel stay transparent at all times. Toggle &Bottom - Toggle &Bottom + Przełącz &dół Toggles the visibility of the bottom overlay panel - Toggles the visibility of the bottom overlay panel + Przełącza widoczność dolnego panelu nakładek @@ -14221,12 +14293,12 @@ This makes the docked panel stay transparent at all times. Bypass &Mouse Events in Overlay Panels - Bypass &Mouse Events in Overlay Panels + Ignoruj zdarzenia &myszki w panelach nakładki Bypasses all mouse events in docked overlay panels - Bypasses all mouse events in docked overlay panels + Pomija wszystkie zdarzenia myszki w zadokowanych panelach nakładki @@ -14234,12 +14306,12 @@ This makes the docked panel stay transparent at all times. Overlay Docked Panel - Overlay Docked Panel + Zadokowany panel nakładki Sets the docked panel in overlay mode - Sets the docked panel in overlay mode + Ustawia zadokowany panel w trybie nakładki @@ -14247,12 +14319,12 @@ This makes the docked panel stay transparent at all times. St&ore Working View - St&ore Working View + &Zachowaj widok roboczy Stores a temporary working view for the current document - Stores a temporary working view for the current document + Przechowuje tymczasowy widok roboczy dla bieżącego dokumentu @@ -14260,12 +14332,12 @@ This makes the docked panel stay transparent at all times. R&ecall Working View - R&ecall Working View + Przy&wróć widok roboczy Recalls a previously stored temporary working view - Recalls a previously stored temporary working view + Przywraca wcześniej zapisany tymczasowy widok roboczy @@ -14273,12 +14345,12 @@ This makes the docked panel stay transparent at all times. &Align to Selection - &Align to Selection + &Wyrównaj do zaznaczenia Aligns the camera view to the selected elements in the 3D view - Aligns the camera view to the selected elements in the 3D view + Wyrównuje widok kamery do zaznaczonych elementów w widoku 3D @@ -14286,12 +14358,12 @@ This makes the docked panel stay transparent at all times. Choose Open &Window - Choose Open &Window + Wybierz otwarte &okno Displays the open windows - Displays the open windows + Wyświetla otwarte okna @@ -14299,12 +14371,12 @@ This makes the docked panel stay transparent at all times. Dock Views - Dock Views + Widoki doku Docks all top-level views - Docks all top-level views + Dokuje wszystkie widoki najwyższego poziomu @@ -14312,12 +14384,12 @@ This makes the docked panel stay transparent at all times. Lock Toolbars - Lock Toolbars + Zablokuj paski narzędzi Locks toolbars so they are no longer moveable - Locks toolbars so they are no longer moveable + Blokuje paski narzędzi, aby nie można było ich przesuwać. @@ -14325,7 +14397,7 @@ This makes the docked panel stay transparent at all times. Exact Match - Exact Match + Dokładne dopasowanie @@ -14333,7 +14405,7 @@ This makes the docked panel stay transparent at all times. Exact Match - Exact Match + Dokładne dopasowanie @@ -14342,12 +14414,12 @@ This makes the docked panel stay transparent at all times. Select a File - Select a File + Wybierz plik Select a Directory - Select a Directory + Wybierz katalog @@ -14355,7 +14427,7 @@ This makes the docked panel stay transparent at all times. Download started… - Download started… + Rozpoczęto pobieranie … @@ -14363,7 +14435,8 @@ This makes the docked panel stay transparent at all times. Mouse pass through, Esc to stop - Mouse pass through, Esc to stop + Przemieszczanie myszką, +ESC, aby zakończyć @@ -14392,43 +14465,43 @@ This makes the docked panel stay transparent at all times. (Warning: unit discarded) - (Warning: unit discarded) + (Ostrzeżenie: jednostka odrzucona) Invalid property name: %1 - Invalid property name: %1 + Nieprawidłowa nazwa właściwości: %1 Unknown object - Unknown object + Nieznany obiekt the name cannot be empty - the name cannot be empty + nazwa nie może być pusta %1 is a unit - %1 is a unit + %1 jest jednostką %1 is a constant - %1 is a constant + %1 jest stałą %1 already exists - %1 already exists + %1 już istnieje Invalid group name: %1 - Invalid group name: %1 + Nieprawidłowa nazwa grupy: %1 @@ -14454,7 +14527,7 @@ This makes the docked panel stay transparent at all times. New parameter... - New parameter... + Nowy parametr … @@ -14462,12 +14535,12 @@ This makes the docked panel stay transparent at all times. All Theme Editor Parameters - All Theme Editor Parameters + Wszystkie parametry Edytora motywów Root - Root + Główny @@ -14496,7 +14569,7 @@ This makes the docked panel stay transparent at all times. Toolbox Bars - Toolbox Bars + Paski narzędzi @@ -14509,7 +14582,7 @@ This makes the docked panel stay transparent at all times. Press middle+right click - Press middle+right click + Naciśnij środkowy i prawy przycisk myszki @@ -14527,7 +14600,7 @@ This makes the docked panel stay transparent at all times. Changes the linked object - Changes the linked object + Zmienia połączony obiekt @@ -14548,17 +14621,17 @@ This makes the docked panel stay transparent at all times. Value out of range (%1 out of [%2, %3]) - Value out of range (%1 out of [%2, %3]) + Wartość poza zakresem (%1 z [%2, %3]) Not a number - Not a number + To nie liczba Unit mismatch between result and required unit - Unit mismatch between result and required unit + Niezgodność jednostek między wynikiem a wymaganą jednostką diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 388e4d5567..408f3d4017 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Renomear - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ simultaneamente. Aquele com a maior prioridade será acionado. Gui::Dialog::DlgCustomToolbars - + Toolbars Barras de ferramentas - + Category Categoria - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Novo - + Rename Renomear - + Delete Excluir - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> As mudanças terão efeito quando carregar novamente a mesa de trabalho apropriada</p></body></html> @@ -6065,12 +6065,12 @@ Save all changes? Macros - + Macro file doesn't exist Arquivo de macro não existe - + No such macro file: '%1' Não existe tal arquivo de macro: '%1' @@ -6424,72 +6424,72 @@ Deseja prosseguir? Gui::PropertyEditor::PropertyEditor - + Edit Editar - + property propriedade - + Copy Copiar - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expressão - + Property name Property name - + Rename property group Renomear grupo de propriedades - + Group name: Nome do grupo: @@ -7837,17 +7837,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Versão OpenGL inválida - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Exceção @@ -8435,12 +8484,12 @@ Escolha 'Abortar' para cancelar Não é possível abrir o navegador do sistema. - + Out of memory Memória insuficiente - + Not enough memory available to display the data. Não há memória suficiente para exibir os dados. @@ -8456,7 +8505,7 @@ Escolha 'Abortar' para cancelar Não é possível encontrar o arquivo %1 nem em %2, nem em %3 - + Navigation styles Estilos de navegação @@ -8506,11 +8555,6 @@ Escolha 'Abortar' para cancelar Not allowed to delete system-wide macros Não é permitido excluir macros do sistema - - - Origin - Origem - Delete group content? diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 9138cdb041..eb1da8213b 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Redenumire - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ acelasi timp. Va fi declanșat cel cu cea mai mare prioritate. Gui::Dialog::DlgCustomToolbars - + Toolbars Bare de instrumente - + Category Categorie - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Nou - + Rename Redenumire - + Delete Ştergeţi - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent: 0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Notă:</span> Modificările devin active data viitoare când încărcați bancul de lucru corespunzător</p ></body></html> @@ -6066,12 +6066,12 @@ Save all changes? Macro-uri - + Macro file doesn't exist Fișierul macro nu există - + No such macro file: '%1' Fișier macro inexistent: «%1 » @@ -6425,72 +6425,72 @@ Cum doresti sa continuam? Gui::PropertyEditor::PropertyEditor - + Edit Editare - + property proprietate - + Copy Copiere - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expresie - + Property name Property name - + Rename property group Redenumește grupul de proprietăți - + Group name: Nume grup: @@ -7838,17 +7838,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Versiune OpenGL invalidă - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Excepţie @@ -8436,12 +8485,12 @@ Alege 'Abandonează' pentru a abandona Imposibil de deschis browser-ul de sistem. - + Out of memory Memorie insuficientă - + Not enough memory available to display the data. Insuficientă memorie disponibilă pentru a afişa datele. @@ -8457,7 +8506,7 @@ Alege 'Abandonează' pentru a abandona Imposibil de găsit fișierul %1 la %2 nici în %3 - + Navigation styles Stiluri de navigare @@ -8507,11 +8556,6 @@ Alege 'Abandonează' pentru a abandona Not allowed to delete system-wide macros Nu sunteți autorizat să ștergeți macro comenzile sistèmului - - - Origin - Origine - Delete group content? diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 551fc45831..5cc38b7f51 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -149,7 +149,7 @@ Set Random Color - " Задать случайный цвет" + Задать случайный цвет @@ -174,7 +174,7 @@ Toggle Selectability - Откл/вкл выделяемость + Переключить выделяемость @@ -197,7 +197,7 @@ Link - Зависимость + Ссылка @@ -247,7 +247,7 @@ Tree View - Дерево документа + Дерево проекта @@ -275,7 +275,7 @@ Dominant mode - Доминантный режим + Доминирующий режим @@ -323,12 +323,12 @@ Expression Editor - Expression Editor + Редактор выражений Store in VarSet... - Store in VarSet... + Хранить в наборе переменных... @@ -338,7 +338,7 @@ Variable Set - Variable Set + Набор переменных @@ -389,7 +389,7 @@ Cu&tting - &Обрезание + &Обрезка @@ -399,12 +399,12 @@ The object will have the color of its individual faces editable with the Appearance per Face command - The object will have the color of its individual faces editable with the Appearance per Face command + Цвет отдельных граней объекта можно изменить с помощью команды Внешний вид грани The object will have its placement editable with the Std TransformManip command - Объекта будет иметь размещение, редактируемое с помощью команды Std TransformManip + Объекта будет иметь размещение, редактируемое с помощью стандартной команды Переместить (TransformManip) @@ -417,7 +417,7 @@ Enter expression… (=) - Enter expression… (=) + Введите выражение… (=) @@ -484,7 +484,7 @@ %1 help files not found (%2). You might need to install the %1 documentation package. - %1 Файлов подсказки не найдено (%2). Возможно, Вам необходимо установить пакет документации %1. + %1 файлов справки не найдено (%2). Возможно, Вам необходимо установить пакет документации %1. @@ -504,7 +504,7 @@ Press Shift and middle mouse button - Press Shift and middle mouse button + Нажмите Shift и среднюю кнопку мыши @@ -532,14 +532,14 @@ Press middle+left or middle+right mouse button - Press middle+left or middle+right mouse button + Нажмите среднюю+левую или среднюю+правую кнопку мыши Scroll mouse wheel or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll mouse wheel or keep middle button depressed -while doing a left or right click and move the mouse up or down + Прокрутите колесо мыши или удерживайте среднюю кнопку нажатой, + одновременно нажав левую или правую кнопку, и переместите мышь вверх или вниз @@ -558,24 +558,24 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Переименовать - + Renames the object - Renames the object + Переименовывает объект + + + + Finish Editing + Завершить редактирование - Finish Editing - Finish Editing - - - Finishes editing the object - Finishes editing the object + Завершает редактирование объекта @@ -614,7 +614,7 @@ while doing a left or right click and move the mouse up or down Copy to Clipboard - Copy to Clipboard + Копировать в буфер обмена @@ -648,7 +648,7 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of: - FreeCAD would not be possible without the contributions of: + FreeCAD не был бы возможен без вклада следующих людей: @@ -694,12 +694,12 @@ while doing a left or right click and move the mouse up or down Cache Directory - Cache Directory + Директория временных файлов The cache directory %1 exceeds the size of %2. - Каталог кэша %1 превышает размер %2. + Каталог временных файлов %1 превышает размер %2. @@ -709,7 +709,7 @@ while doing a left or right click and move the mouse up or down Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! - Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! + Предупреждение: Пожалуйста, убедитесь, что это единственный запущенный экземпляр %1 и что ни один документ не открыт, так как это может привести к потере данных! @@ -788,7 +788,7 @@ while doing a left or right click and move the mouse up or down Flip - инверт. + Разворот @@ -803,7 +803,7 @@ while doing a left or right click and move the mouse up or down Custom Clipping Direction - Направление обрезки + Пользовательское направление обрезки @@ -948,11 +948,11 @@ In this case the prefix will be automatically trimmed when shown in the property However, the property is still used in a script with the full name, like 'obj.Group_Name'. If this is not checked, the property must be uniquely named, and it is accessed like 'obj.Name'. - Prefix the property name with the group name in the form 'Group_Name' to avoid conflicts with an existing property. -In this case the prefix will be automatically trimmed when shown in the property editor. -However, the property is still used in a script with the full name, like 'obj.Group_Name'. + Добавьте к имени свойства префикс с именем группы в формате 'Group_Name', чтобы избежать конфликтов с существующим свойством. +В этом случае префикс будет автоматически удалён при отображении в редакторе свойств. +Однако свойство по-прежнему будет использоваться в скрипте с полным именем, например 'obj.Group_Name'. -If this is not checked, the property must be uniquely named, and it is accessed like 'obj.Name'. +Если этот флажок не установлен, свойство должно иметь уникальное имя, и доступ к нему осуществляется как 'obj.Name'. @@ -975,7 +975,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Site - Местность + Веб-сайт @@ -1157,7 +1157,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Could not find macro file '%1' - Could not find macro file '%1' + Не удалось найти файл макроса '%1' @@ -1167,7 +1167,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Specify the macro first - Specify the macro first + Сначала укажите макрос @@ -1179,7 +1179,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Specify the menu text first - Specify the menu text first + Сначала укажите текст меню @@ -1189,7 +1189,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Select a macro item first - Select a macro item first + Сначала выберите макрос @@ -1209,7 +1209,7 @@ If this is not checked, the property must be uniquely named, and it is accessed To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - Чтобы изменить текущий ярлык, введите новый ярлык в поле ниже и нажмите 'Назначить'. + Чтобы изменить текущее сочетание клавиш, введите новое сочетание в поле ниже и нажмите 'Назначить' @@ -1235,7 +1235,7 @@ same time. The one with the highest priority will be triggered. Current shortcut - Текущая комбинация клавиш + Текущее сочетание клавиш @@ -1307,7 +1307,7 @@ same time. The one with the highest priority will be triggered. Type to search… - Введите для поиска + Введите для поиска… @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Панели инструментов - + Category Категория - + Move Right Переместить вправо - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> + <b>Перемещает выбранный элемент на один уровень вниз.</b><p> Это также изменит уровень родительского элемента.</p> - + Move Left Переместить влево - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> + <b>Перемещает выбранный элемент на один уровень выше.</b><p> Это также изменит уровень родительского элемента.</p> - + Move Up Переместить вверх - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> + <b>Перемещает выбранный элемент вверх.</b><p> Элемент будет перемещён в пределах уровня иерархии.</p> - + Move Down Переместить вниз - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> + <b>Перемещает выбранный элемент вниз.</b><p> Элемент будет перемещен в пределах уровня иерархии.</p> - + New Новый - + Rename Переименовать - + Delete Удалить - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Примечание:</span> Изменения активируются при следующей загрузке соответствующего верстака</p></body></html> @@ -1504,7 +1504,7 @@ same time. The one with the highest priority will be triggered. No Spaceball present - No Spaceball present + Пространственный манипулятор не обнаружен @@ -1517,7 +1517,7 @@ same time. The one with the highest priority will be triggered. No Spaceball present - No Spaceball present + Пространственный манипулятор не обнаружен @@ -1645,7 +1645,7 @@ same time. The one with the highest priority will be triggered. Launches a guide on how to set up a macro in a custom global toolbar - Запустите руководство по настройке макроса на главной панели инструментов + Запускает руководство по настройке макроса на главной панели инструментов @@ -1660,7 +1660,7 @@ same time. The one with the highest priority will be triggered. Opens the macros folder in the system file manager - Opens the macros folder in the system file manager + Открывает папку макросов в системном файловом менеджере @@ -1675,7 +1675,7 @@ same time. The one with the highest priority will be triggered. Filter by file content, case-insensitive. Regular expressions are supported. - Filter by file content, case-insensitive. Regular expressions are supported. + Фильтровать по содержимому файла, без учёта регистра. Поддерживаются регулярные выражения. @@ -1741,7 +1741,7 @@ This file already exists. Note: your changes will be applied when you next switch workbenches - Это руководство поможет вам при настройке этого макроса в пользовательской глобальной панели инструментов. Инструкции будут в красном тексте диалога. + Это поможет вам настроить этот макрос в настраиваемой глобальной панели инструментов. Инструкции будут отображаться красным шрифтом в диалоговом окне. Примечание: ваши изменения будут применены при следующем переключении верстаков @@ -1789,18 +1789,18 @@ Note: your changes will be applied when you next switch workbenches Walkthrough, Dialog 1 of 1 - Walkthrough, Dialog 1 of 1 + Пошаговое руководство, диалоговое окно 1 из 1 Walkthrough, Dialog 2 of 2 - Walkthrough, Dialog 2 of 2 + Пошаговое руководство, диалоговое окно 2 из 2 Enter new name - Enter new name + Введите новое имя @@ -1844,7 +1844,7 @@ Perhaps a file permission error? Record Macro - Record Macro + Записать Макрос @@ -1854,12 +1854,12 @@ Perhaps a file permission error? Macro Path - Macro Path + Путь к макросу Choose Folder - Choose Folder + Выберите папку @@ -1889,22 +1889,22 @@ Perhaps a file permission error? Specify a place to save first. - Specify a place to save first. + Сначала укажите место для сохранения. The macro directory does not exist. Choose another one. - The macro directory does not exist. Choose another one. + Директория для макроса не существует. Выберите другую. The macro '%1' already exists. Overwrite it? - The macro '%1' already exists. Overwrite it? + Макрокоманда '%1' уже существует. Перезаписать её? You have no write permission for the directory. Choose another one. - You have no write permission for the directory. Choose another one. + У вас нет прав на запись в данную директорию. Выберите другую. @@ -1937,7 +1937,7 @@ Perhaps a file permission error? Material Properties - Material Properties + Свойства материала @@ -1952,12 +1952,12 @@ Perhaps a file permission error? Ambient color - Ambient color + Окружающий цвет Specular color - Specular color + Цвет зеркального отражения @@ -1967,7 +1967,7 @@ Perhaps a file permission error? Emissive color - Emissive color + Излучаемый цвет @@ -1984,12 +1984,12 @@ Perhaps a file permission error? Online Help - Online Help + Онлайн справка Help Viewer - Help Viewer + Просмотрщик справки @@ -2014,9 +2014,9 @@ Perhaps a file permission error? Access denied to '%1' Specify another directory. - Access denied to '%1' + Отказано в доступе к '%1' -Specify another directory. +Укажите другую директорию. @@ -2039,7 +2039,7 @@ Specify another directory. Enter a group name to search - Enter a group name to search + Введите имя группы для поиска @@ -2054,7 +2054,7 @@ Specify another directory. Search group - Search group + Поиск группы @@ -2078,12 +2078,12 @@ Specify another directory. Find What - Find What + Что будем искать Look At - Look At + Искать в @@ -2103,7 +2103,7 @@ Specify another directory. Match exact string - Match exact string + Точное соответствие строки @@ -2118,7 +2118,7 @@ Specify another directory. Cannot find the text: %1 - Cannot find the text: %1 + Не удалось найти текст: %1 @@ -2160,7 +2160,7 @@ Specify another directory. Search group - Search group + Поиск группы @@ -2183,7 +2183,7 @@ Specify another directory. Open Addon Manager - Open Addon Manager + Открыть менеджер дополнений @@ -2206,17 +2206,17 @@ Specify another directory. Deletes the user-saved preference pack '%1' - Deletes the user-saved preference pack '%1' + Удалит сохранённый пользователем набор настроек '%1' Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) - Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) + Переключает видимость пакета настроек дополнения '%1' (для окончательного удаления используйте Менеджер дополнений) Delete the preference pack named '%1'? This cannot be undone. - Delete the preference pack named '%1'? This cannot be undone. + Удалить пакет настроек с именем '%1'? Это действие нельзя отменить. @@ -2244,7 +2244,7 @@ Specify another directory. Search preferences... - Search preferences... + Поиск настроек... @@ -2256,7 +2256,7 @@ Specify another directory. Reset Page '%1' - Reset Page '%1' + Сбросить страницу '%1' @@ -2266,47 +2266,47 @@ Specify another directory. Reset Group '%1' - Reset Group '%1' + Сбросить группу '%1' Reset All - Reset All + Сбросить всё Clear User Settings - Clear User Settings + Очистить пользовательские настройки Clear all your user settings? - Clear all your user settings? + Очистить все настройки пользователя? All settings will be cleared. - All settings will be cleared. + Все настройки будут очищены. Restart Required - Restart Required + Требуется перезапуск Restart FreeCAD for changes to take effect. - Restart FreeCAD for changes to take effect. + Чтобы изменения вступили в силу, вам необходимо перезапустить FreeCAD. Restart Now - Restart Now + Перезапустить сейчас Restart Later - Restart Later + Перезапустить позже @@ -2316,7 +2316,7 @@ Specify another directory. Resets the user settings entirely - Сбрасывает настройки пользователя полностью + Полностью сбрасывает настройки пользователя @@ -2329,7 +2329,7 @@ Specify another directory. Document Information - Document Information + Информация о документе @@ -2359,7 +2359,7 @@ Specify another directory. Unit system - Система измерения + Система единиц измерения @@ -2394,12 +2394,12 @@ Specify another directory. Open in Browser - Открыть с помощью браузера + Открыть в браузере &Comment - &Закомментировать + &Комментарий @@ -2421,7 +2421,7 @@ Specify another directory. Document Utility - Document Utility + Инструменты документа @@ -2448,7 +2448,7 @@ Specify another directory. Create Document - Create Document + Создать документ @@ -2505,7 +2505,7 @@ Specify another directory. Link - Зависимость + Ссылка @@ -2515,7 +2515,7 @@ Specify another directory. Synchronizes the 3D view selection with the full object hierarchy - Synchronizes the 3D view selection with the full object hierarchy + Синхронизирует выбор в 3D виде со всей иерархией объектов @@ -2555,12 +2555,12 @@ Specify another directory. Revert to Backup Config - Вернуться к Конфигурации Резервного копирования + Вернуться к конфигурации из Резервной копии WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. - WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. + ВНИМАНИЕ: этот процесс отменит все изменения настроек, внесённые после указанной даты, а также сбросит ваши недавние файлы и макросы до состояния на эту дату. @@ -2650,17 +2650,17 @@ lower right corner within opened files X-axis color - Цвет по оси X + Цвет оси X Y-axis color - Цвет по оси Y + Цвет оси Y Z-axis color - Цвета Z-оси + Цвет оси Z @@ -2753,7 +2753,7 @@ will be shown at the lower left corner in opened files Render types of transparent objects - Отображение типов прозрачных объектов + Типы отрисовки прозрачных объектов @@ -2768,7 +2768,7 @@ will be shown at the lower left corner in opened files Size of vertices in the Sketcher, TechDraw and other workbenches - Размеры вершин в Sketcher, TechDraw и других верстаках + Размеры вершин в Скетчер (Sketcher), ТехническийЧертёж (TechDraw) и других верстаках @@ -2784,8 +2784,7 @@ will be shown at the lower left corner in opened files Size of main coordinate system representation in the corner in % of height/width of the viewport - Size of main coordinate system representation -in the corner in % of height/width of the viewport + Размер отображения основной системы координат в углу, выраженный в % от соотношения высоты/ширины окна просмотра @@ -2796,8 +2795,8 @@ in the corner in % of height/width of the viewport This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. - This option is useful for troubleshooting graphics card and driver problems. -Changing this option requires a restart of the application. + Эта опция полезна для устранения неполадок с видеокартой и драйверами. +Изменение этой опции требует перезапуска приложения. @@ -2811,21 +2810,16 @@ can be rendered directly by the GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support. - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by the GPU. + Если выбрано, будут использоваться объекты буфера вершин (VBO). +VBO — это функция OpenGL, которая предоставляет методы для загрузки данных вершин (положение, вектор нормали, цвет и т. д.) в графическую карту. +VBO обеспечивают значительное повышение производительности, поскольку данные хранятся в памяти графической карты, а не в системной памяти, и поэтому могут быть непосредственно отображены графическим процессором. -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support. +Примечание: Иногда эта функция может привести к целому ряду различных проблем, от графических аномалий до сбоев GPU. Не забудьте указать, что эта настройка включена, когда обращаетесь за поддержкой. Method of multisample anti-aliasing - Method of multisample anti-aliasing + Метод многократного сглаживания @@ -2840,7 +2834,7 @@ report this setting as enabled when seeking support. Transparent objects - Transparent objects + Прозрачные объекты @@ -2851,13 +2845,13 @@ There are 3 options available to achieve this: 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - 'Render caching' is another way to say 'Rendering acceleration'. -There are 3 options available to achieve this: -1) 'Auto' (default), let Coin3D decide where to cache. -2) 'Distributed', manually turn on cache for all view provider root node. -3) 'Centralized', manually turn off cache in all nodes of all view provider, and -only cache at the scene graph root node. This offers the fastest rendering speed -but slower response to any scene changes. + 'Кэширование рендера' - по-другому называется 'Ускорение рендера'. +Для его достижения доступно 3 опции: +1) 'Авто' (по умолчанию), пусть Coin3D сам решит, где кэшировать. +2) 'Распределённый', вручную включает кэш для всех корневых узлов провайдера. +3) 'Централизованный', вручную выключает кэш во всех узлах провайдера просмотра и +кэширует только в корневом узле графа сцены. Это обеспечивает самую высокую скорость визуализации, +но более медленную реакцию на любые изменения сцены. @@ -2870,12 +2864,12 @@ bounding box size of the 3D object that is currently displayed. Camera Type - Camera Type + Тип камеры Objects will be in orthographic projection - Objects will be in orthographic projection + Объекты будут отображаться в ортографической проекции @@ -2960,27 +2954,27 @@ bounding box size of the 3D object that is currently displayed. Cache - Кэш + Временные файлы Browse cache directory - Просмотр директории кэша + Просмотр директории временных файлов Cache Directory - Cache Directory + Директория временных файлов Location (read-only) - Location (read-only) + Расположение (только для чтения) Check periodically at program start - Check periodically at program start + Периодически проверять при запуске программы @@ -3015,7 +3009,7 @@ bounding box size of the 3D object that is currently displayed. Cache size limit - Cache size limit + Ограничение размера временных файлов @@ -3025,7 +3019,7 @@ bounding box size of the 3D object that is currently displayed. Notify the user if the cache size exceeds the specified limit - Уведомить пользователя, если размер кэша превышает установленное ограничение + Уведомить пользователя, если размер временных файлов превышает установленное ограничение @@ -3035,7 +3029,7 @@ bounding box size of the 3D object that is currently displayed. Current cache size: %1 - Текущий размер кэша: %1 + Текущий размер временных файлов: %1 @@ -3043,7 +3037,7 @@ bounding box size of the 3D object that is currently displayed. Color Gradient Settings - Настройки цветовой градиента + Настройки цветового градиента @@ -3291,12 +3285,12 @@ besides the color bar Show format documentation - Показать документацию по формату + Показать формат документации Using undo/redo in documents - Using undo/redo in documents + Использовать функции отменить/повторить в документах @@ -3306,26 +3300,25 @@ besides the color bar How many undo/redo steps should be recorded - How many undo/redo steps should be recorded + Сколько шагов отмены/повтора следует записывать Allow user aborting document recomputation by pressing Esc. This feature may slightly increase recomputation time. - Allow user aborting document recomputation by pressing Esc. -This feature may slightly increase recomputation time. + Разрешает пользователю прервать пересчёт документа нажатием клавиши Esc. Эта функция может немного увеличить время пересчёта. Add thumbnail to project file when saving - Add thumbnail to project file when saving + Добавить миниатюру к файлу проекта при сохранении Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512. - Sets the size of the thumbnail that is stored in the document. -Common sizes are 128, 256 and 512. + Устанавливает размер миниатюры, которая хранится в документе. +Обычные размеры: 128, 256 и 512. @@ -3336,23 +3329,23 @@ Common sizes are 128, 256 and 512. If there is a recovery file available, the application will automatically run a file recovery when it is started - If there is a recovery file available, the application will -automatically run a file recovery when it is started + Если файл восстановления доступен приложение +автоматически выполнит восстановление при его запуске The program icon will be added to the thumbnail - The program icon will be added to the thumbnail + Логотип программы будет добавлен к миниатюре Add program icon to the generated thumbnail - Add program icon to the generated thumbnail + Добавить логотип программы в генерируемую миниатюру Save auto-recovery information every - Save auto-recovery information every + Автосохранение каждые @@ -3374,12 +3367,12 @@ get date suffix according to the specified format Document Objects - Document Objects + Объекты документа Allow objects to have same label - Разрешить объектам иметь одинаковые имена + Разрешить объектам иметь одинаковые метки (Label) @@ -3394,8 +3387,8 @@ when a linked document is auto-opened together with the main document. A partially loaded document cannot be edited. Double click the document icon in the tree view to fully reload it. Позволяет частичную загрузку внешних связанных документов. -Затем будут загружены только ссылающиеся объекты и их зависимости при автооткрытии связанного документа вместе с основным документом. -Частично загруженный документ не может быть изменён. Дважды щёлкните на иконке документа в виде дерева, чтобы полностью перезагрузить его. +Тогда будут загружены только ссылающиеся объекты и их зависимости при автооткрытии связанного документа вместе с основным документом. +Частично загруженный документ не может быть изменён. Дважды щёлкните на иконке документа в дереве проекта, чтобы полностью перезагрузить его. @@ -3542,7 +3535,7 @@ You can also use the form: John Doe <john@doe.com> Show format documentation - Показать документацию по формату + Показать формат документации @@ -3576,32 +3569,32 @@ You can also use the form: John Doe <john@doe.com> Image Settings - Image Settings + Параметры изображения Image Dimensions - Image Dimensions + Размеры изображения Standard sizes - Standard sizes + Стандартные размеры &Width - &Width + &Ширина &Height - &Height + &Высота Aspect ratio - Aspect ratio + Соотношение сторон @@ -3646,22 +3639,22 @@ You can also use the form: John Doe <john@doe.com> Image Properties - Image Properties + Свойства изображения Back&ground - Back&ground + &Фон Creation method - Creation method + Метод создания Image Comment - Image Comment + Комментарий к изображению @@ -3704,22 +3697,22 @@ You can also use the form: John Doe <john@doe.com> Offscreen (new) - Offscreen (new) + Вне экрана (новое) Offscreen (old) - Offscreen (old) + Вне экрана (старое) Framebuffer (custom) - Framebuffer (пользовательский) + Видеобуфер (пользовательский) Framebuffer (as is) - Framebuffer (как есть) + Видеобуфер (как есть) @@ -3747,22 +3740,22 @@ You can also use the form: John Doe <john@doe.com> General Macro Settings - General Macro Settings + Общие параметры макросов Macro Recording Settings - Macro Recording Settings + Настройки записи макросов Macro Path - Macro Path + Куда записывать макросы Gui Commands - Gui Commands + Команды в графическом интерфейсе @@ -3802,12 +3795,12 @@ You can also use the form: John Doe <john@doe.com> Log all commands issued by menus to file - Log all commands issued by menus to file + Записывать все команды, выдаваемые меню, в файл Recent Macros Menu - Recent Macros Menu + Меню недавних макросов @@ -3921,7 +3914,7 @@ You can also use the form: John Doe <john@doe.com> Opacity of the navigation cube when not focused - Непрозрачность куба навигации, когда он не сфокусирован + Непрозрачность куба навигации, когда он вне фокуса @@ -3961,7 +3954,7 @@ You can also use the form: John Doe <john@doe.com> Orbit style - Вращение + Стиль вращения @@ -4500,7 +4493,7 @@ A larger value makes it easier to select elements, but may prevent selection of Tree View - Дерево документа + Дерево проекта @@ -4613,7 +4606,7 @@ To add a calculation press Return in the value input field Unit system - Система измерения + Система единиц измерения @@ -6063,12 +6056,12 @@ Save all changes? Макрос - + Macro file doesn't exist Файл макроса не существует - + No such macro file: '%1' Нет такого файла макроса: «%1» @@ -6421,72 +6414,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Редактировать - + property свойства - + Copy Копировать - + Add Property Добавить свойство - + Rename Property Group Переименовать группу свойств - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Переименовать свойство - + Show Hidden Показывать скрытые - + Auto-Expand Разворачивать автоматически - + Expression Выражение - + Property name Название свойства - + Rename property group Переименовать группу свойств - + Group name: Название группы: @@ -6693,7 +6686,7 @@ Exit without saving all data? Press Shift and middle mouse button - Press Shift and middle mouse button + Нажмите Shift и среднюю кнопку мыши @@ -7712,7 +7705,7 @@ Specify another directory? Tree View - Дерево документа + Дерево проекта @@ -7834,17 +7827,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Недопустимая версия OpenGL - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Исключение @@ -8432,12 +8474,12 @@ Choose 'Abort' to abort Не удается открыть ваш системный браузере. - + Out of memory Недостаточно памяти - + Not enough memory available to display the data. Недостаточно памяти для отображения данных. @@ -8453,7 +8495,7 @@ Choose 'Abort' to abort Не удается найти файл %1, ни в %2 ни в %3 - + Navigation styles Стили навигации @@ -8503,11 +8545,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Не разрешается удалять системные макросы - - - Origin - Начало координат - Delete group content? @@ -11966,7 +12003,7 @@ the region are non-opaque. Tree View - Дерево документа + Дерево проекта @@ -12748,7 +12785,7 @@ the region are non-opaque. Link - Зависимость + Ссылка @@ -13284,7 +13321,7 @@ Proceed? Opens the macros folder in the system file manager - Opens the macros folder in the system file manager + Открывает папку макросов в системном файловом менеджере @@ -13422,7 +13459,7 @@ Proceed? New Part - New Part + Новая Деталь @@ -13448,7 +13485,7 @@ Proceed? Variable Set - Variable Set + Набор переменных @@ -14338,7 +14375,7 @@ This makes the docked panel stay transparent at all times. Tree View - Дерево документа + Дерево проекта diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index fb7090b192..2fb099de62 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Preimenuj - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ tisti z višjo prednostjo. Gui::Dialog::DlgCustomToolbars - + Toolbars Orodne vrstice - + Category Skupina - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Novo - + Rename Preimenuj - + Delete Izbriši - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Opomba:</span> Spremembe stopijo v veljavo, ko naslednjič naložite odgovarjajoče delovno okolje</p></body></html> @@ -6067,12 +6067,12 @@ Save all changes? Makri - + Macro file doesn't exist Datoteka makra ne obstaja - + No such macro file: '%1' Ni datoteke makra: '%1' @@ -6426,72 +6426,72 @@ Kako želite nadaljevati? Gui::PropertyEditor::PropertyEditor - + Edit Uredi - + property lastnost - + Copy Kopiraj - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Izraz - + Property name Property name - + Rename property group Preimenuj skupino lastnosti - + Group name: Ime skupine: @@ -7839,17 +7839,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Neveljavna OpenGL različica - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Izjema @@ -8437,12 +8486,12 @@ Izberite "Prekini" za prekinitev Sistemskega brskalnika ni mogoče odpreti. - + Out of memory Zmanjkalo je pomnilnika - + Not enough memory available to display the data. Ni dovolj pomnilnika za prikaz podatkov. @@ -8458,7 +8507,7 @@ Izberite "Prekini" za prekinitev Datoteke %1 ni mogoče najti v %2 niti v %3 - + Navigation styles Slogi krmarjenja @@ -8508,11 +8557,6 @@ Izberite "Prekini" za prekinitev Not allowed to delete system-wide macros Sistemskih makrov ni dovoljeno izbrisati - - - Origin - Izhodišče - Delete group content? diff --git a/src/Gui/Language/FreeCAD_sr-CS.ts b/src/Gui/Language/FreeCAD_sr-CS.ts index f8799d56da..dbe4f0a266 100644 --- a/src/Gui/Language/FreeCAD_sr-CS.ts +++ b/src/Gui/Language/FreeCAD_sr-CS.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Preimenuj - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ pokrenuće se ona sa najvećim prioritetom. Gui::Dialog::DlgCustomToolbars - + Toolbars Palete alatki - + Category Kategorija - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Pomeri nagore - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Pomeri nadole - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Novi - + Rename Preimenuj - + Delete Obriši - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Napomena:</span> Promene će postati aktivne sledeći put kada učitate odgovarajuće radno okruženje​</p></body></html> @@ -6068,12 +6068,12 @@ Save all changes? Makro-i - + Macro file doesn't exist Makro datoteka ne postoji - + No such macro file: '%1' Nema takve macro datoteke: '%1' @@ -6427,72 +6427,72 @@ Kako želiš da nastaviš? Gui::PropertyEditor::PropertyEditor - + Edit Uredi - + property osobina - + Copy Kopiraj - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Preimenuj grupu osobina - + Group name: Naziv grupe: @@ -7840,17 +7840,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Pogrešna OpenGL verzija - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Izuzetak @@ -8438,12 +8487,12 @@ Izaberi „Prekini“ da bi prekinuo Ne mogu otvoriti vaš sistemski pregledač. - + Out of memory Nema dovoljno memorije - + Not enough memory available to display the data. Nema dovoljno memorije za prikazivanje podataka. @@ -8459,7 +8508,7 @@ Izaberi „Prekini“ da bi prekinuo Ne mogu pronaći datoteku %1 ni u %2 ni u %3 - + Navigation styles Navigacioni stilovi @@ -8509,11 +8558,6 @@ Izaberi „Prekini“ da bi prekinuo Not allowed to delete system-wide macros Nije dozvoljeno brisanje sistemskih makro-a - - - Origin - Koordinatni početak - Delete group content? diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 0e2f1119ef..dd45099e6e 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Преименуј - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Палете алатки - + Category Категорија - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Помери нагоре - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Помери надоле - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Нови - + Rename Преименуј - + Delete Обриши - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Напомена:</span> Промене ће постати активне следећи пут када учитате одговарајуц́е радно окружење</p></body></html> @@ -6068,12 +6068,12 @@ Save all changes? Макро-и - + Macro file doesn't exist Maкro датотека не постоји - + No such macro file: '%1' Нема такве maкro датотеке: '%1' @@ -6427,72 +6427,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Уреди - + property особина - + Copy Копирај - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Преименуј групу особина - + Group name: Назив групе: @@ -7840,17 +7840,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Погрешна OpenGL верзија - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Изузетак @@ -8438,12 +8487,12 @@ Choose 'Abort' to abort Не могу отворити ваш системски прегледач. - + Out of memory Нема довољно меморије - + Not enough memory available to display the data. Нема довољно меморије за приказивање података. @@ -8459,7 +8508,7 @@ Choose 'Abort' to abort Не могу пронаћи датотеку %1 ни у %2 ни у %3 - + Navigation styles Навигациони стилови @@ -8509,11 +8558,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Није дозвољено брисање системских макро-а - - - Origin - Координатни почетак - Delete group content? diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 736a5586bc..9b4a84affe 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Döp om - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1348,72 +1348,72 @@ samma gång. Den med högsta prioritet kommer att utlösas. Gui::Dialog::DlgCustomToolbars - + Toolbars Verktygslådor - + Category Kategori - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Ny - + Rename Döp om - + Delete Radera - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> Ändringarna blir aktiva nästa gång du laddar passande arbetsbänk</p></body></html> @@ -6067,12 +6067,12 @@ Save all changes? Makron - + Macro file doesn't exist Makrofil existerar inte - + No such macro file: '%1' Ingen sådan macrofil: '%1' @@ -6426,72 +6426,72 @@ Hur vill du fortsätta? Gui::PropertyEditor::PropertyEditor - + Edit Redigera - + property egenskap - + Copy Kopiera - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Uttryck - + Property name Property name - + Rename property group Byt namn på egenskapsgrupp - + Group name: Gruppnamn: @@ -7839,17 +7839,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Ogiltig OpenGL-version - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Undantag @@ -8437,12 +8486,12 @@ Välj "Avbryt" för att avbryta Kan inte öppna din systemwebbläsare. - + Out of memory Slut på minne - + Not enough memory available to display the data. Det finns inte tillräckligt med minne för att visa datan. @@ -8458,7 +8507,7 @@ Välj "Avbryt" för att avbryta Kan inte finna fil %1, varken i %2 eller i %3 - + Navigation styles Navigationsstilar @@ -8508,11 +8557,6 @@ Välj "Avbryt" för att avbryta Not allowed to delete system-wide macros Inte tillåtet att ta bort systemmakron - - - Origin - Origo - Delete group content? diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 6fcc2694eb..a2e85d3a4b 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Yeniden Adlandır - + Renames the object Renames the object - + Finish Editing Finish Editing - + Finishes editing the object Finishes editing the object @@ -1350,72 +1350,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Araç çubukları - + Category Kategori - + Move Right Move Right - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Yeni - + Rename Yeniden Adlandır - + Delete Sil - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> @@ -6070,12 +6070,12 @@ Save all changes? Makrolar - + Macro file doesn't exist Makro dosyası yok - + No such macro file: '%1' Böyle bir makro dosya: '%1' @@ -6430,72 +6430,72 @@ sağ görünümde %2 nokta seçili. Gui::PropertyEditor::PropertyEditor - + Edit Düzenle - + property özellik - + Copy Kopyala - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression İfade - + Property name Property name - + Rename property group Özellik grubunu yeniden adlandırın - + Group name: Grup adı: @@ -7843,17 +7843,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Özel durum(İstisna) @@ -8441,12 +8490,12 @@ Vazgeçmek için 'Vazgeç' i seçin Sistem tarayıcı açılamıyor. - + Out of memory Yetersiz bellek - + Not enough memory available to display the data. Verileri görüntülemek için yetersiz bellek. @@ -8462,7 +8511,7 @@ Vazgeçmek için 'Vazgeç' i seçin %1 Dosyası %2 veya %3 içinde bulunamıyor - + Navigation styles Gezinme şekilleri @@ -8512,11 +8561,6 @@ Vazgeçmek için 'Vazgeç' i seçin Not allowed to delete system-wide macros Sistemde makrolar silmek için izin verilmez - - - Origin - Orijin - Delete group content? diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 3cf435d8d8..9543b10f73 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -6,7 +6,7 @@ <empty> - <пусто> + <порожньо> @@ -34,7 +34,7 @@ Base - Основа + База @@ -42,7 +42,7 @@ Test Console Output - Test Console Output + Тестовий вивід у консолі @@ -169,12 +169,12 @@ Toggle Transparency - Toggle Transparency + Перемкнути прозорість Toggle Selectability - Toggle Selectability + Перемкнути вибірковість @@ -247,7 +247,7 @@ Tree View - Tree View + Деревовидний перегляд @@ -265,27 +265,27 @@ Flip Y/Z - Віддзеркалити Y/Z + Поміняти місцями Y/Z Global sensitivity - Global sensitivity + Глобальна чутливість Dominant mode - Dominant mode + Домінантний режим Enable translations - Enable translations + Увімкнути переміщення Enable rotations - Enable rotations + Увімкнути обертання @@ -315,7 +315,7 @@ Reverse - Зворотній напрямок + Зворотний напрямок @@ -323,12 +323,12 @@ Expression Editor - Expression Editor + Редактор виразів Store in VarSet... - Store in VarSet... + Зберегти у VarSet... @@ -338,7 +338,7 @@ Variable Set - Variable Set + Набір змінних (VarSet) @@ -389,7 +389,7 @@ Cu&tting - Cu&tting + Рі&зання @@ -399,7 +399,7 @@ The object will have the color of its individual faces editable with the Appearance per Face command - The object will have the color of its individual faces editable with the Appearance per Face command + Об'єкт отримає можливість редагування кольору окремих граней за допомогою команди "Зовнішній вигляд за гранню" @@ -417,7 +417,7 @@ Enter expression… (=) - Enter expression… (=) + Введіть вираз… (=) @@ -484,14 +484,14 @@ %1 help files not found (%2). You might need to install the %1 documentation package. - %1 файлів довідки не знайдено (%2). Швидше за все вам потрібно буде встановити %1 пакет документації. + %1 файлів довідки не знайдено (%2). Ймовірно, вам потрібно встановити пакет документації %1. Unable to launch Qt Assistant (%1) - Неможливо запустити Qt Assistant (%1) + Не вдалося запустити Qt Assistant (%1) @@ -504,7 +504,7 @@ Press Shift and middle mouse button - Press Shift and middle mouse button + Натисніть Shift і середню кнопку миші @@ -514,7 +514,7 @@ Scroll mouse wheel - Прокрутити колесо миші + Прокрутіть колесо миші @@ -532,14 +532,14 @@ Press middle+left or middle+right mouse button - Press middle+left or middle+right mouse button + Натисніть середню+ліву або середню+праву кнопку миші Scroll mouse wheel or keep middle button depressed while doing a left or right click and move the mouse up or down - Scroll mouse wheel or keep middle button depressed -while doing a left or right click and move the mouse up or down + Прокрутіть колесо миші або утримуйте натиснутою середню кнопку, +виконуючи лівий чи правий клік і переміщуючи мишу вгору чи вниз @@ -558,24 +558,24 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename Перейменувати - + Renames the object - Renames the object + Перейменовує об’єкт + + + + Finish Editing + Завершити редагування - Finish Editing - Finish Editing - - - Finishes editing the object - Finishes editing the object + Завершує редагування об’єкта @@ -584,7 +584,7 @@ while doing a left or right click and move the mouse up or down About - Про + Про програму @@ -614,7 +614,7 @@ while doing a left or right click and move the mouse up or down Copy to Clipboard - Copy to Clipboard + Копіювати в буфер обміну @@ -648,13 +648,13 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of: - FreeCAD would not be possible without the contributions of: + FreeCAD не був би можливим без внеску таких осіб: Individuals Header for the list of individual people in the Credits list. - Персон + Окремі особи @@ -694,7 +694,7 @@ while doing a left or right click and move the mouse up or down Cache Directory - Cache Directory + Каталог кешу @@ -704,12 +704,12 @@ while doing a left or right click and move the mouse up or down Clear it now? - Clear it now? + Очистити зараз? Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! - Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! + Увага: Переконайтеся, що це єдиний запущений екземпляр %1 і що жодні документи не відкриті, інакше можливі втрати даних! @@ -722,7 +722,7 @@ while doing a left or right click and move the mouse up or down Out of range - Out of range + Поза діапазоном @@ -730,7 +730,7 @@ while doing a left or right click and move the mouse up or down Camera Settings - Camera Settings + Налаштування камери @@ -760,7 +760,7 @@ while doing a left or right click and move the mouse up or down Current View - Current View + Поточний вигляд @@ -803,7 +803,7 @@ while doing a left or right click and move the mouse up or down Custom Clipping Direction - Custom Clipping Direction + Користувацький напрямок відсікання @@ -918,7 +918,7 @@ while doing a left or right click and move the mouse up or down Add Property - Add Property + Додати властивість @@ -939,7 +939,7 @@ while doing a left or right click and move the mouse up or down Verbose description of the new property - Verbose description of the new property + Розгорнутий опис нової властивості @@ -1089,7 +1089,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Menu text - Menu text + Текст у меню @@ -1099,17 +1099,17 @@ If this is not checked, the property must be uniquely named, and it is accessed Status text - Status text + Текст статусу What's this - What's this + Що це таке Accelerator - Accelerator + Гаряча клавіша @@ -1157,7 +1157,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Could not find macro file '%1' - Could not find macro file '%1' + Не вдалося знайти файл макросу '%1' @@ -1167,7 +1167,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Specify the macro first - Specify the macro first + Спершу вкажіть макрос @@ -1179,7 +1179,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Specify the menu text first - Specify the menu text first + Спершу вкажіть текст меню @@ -1189,7 +1189,7 @@ If this is not checked, the property must be uniquely named, and it is accessed Select a macro item first - Select a macro item first + Спершу виберіть елемент макросу @@ -1307,7 +1307,7 @@ same time. The one with the highest priority will be triggered. Type to search… - Type to search… + Введіть для пошуку… @@ -1348,72 +1348,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars Панелі інструментів - + Category Категорія - + Move Right - Move Right + Перемістити вправо - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left - Move Left + Перемістити вліво - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up - Move Up + Перемістити вгору - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down - Move Down + Перемістити вниз - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New Новий - + Rename Перейменувати - + Delete Видалити - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Примітка:</span> Зміни стануть активними під час наступного завантаження відповідного робочого простору</p></body></html> @@ -1504,7 +1504,7 @@ same time. The one with the highest priority will be triggered. No Spaceball present - No Spaceball present + Пристрій Spaceball не знайдено @@ -1517,7 +1517,7 @@ same time. The one with the highest priority will be triggered. No Spaceball present - No Spaceball present + Пристрій Spaceball не знайдено @@ -1532,7 +1532,7 @@ same time. The one with the highest priority will be triggered. Print Reference - Друкувати посилання + Друкувати довідку @@ -1580,22 +1580,22 @@ same time. The one with the highest priority will be triggered. Execute Macro - Execute Macro + Виконати макрос Macro Name - Macro Name + Назва макросу Find file - Find file + Знайти файл Find in files - Find in files + Шукати у файлах @@ -1655,7 +1655,7 @@ same time. The one with the highest priority will be triggered. User Macros Location - User Macros Location + Розташування користувацьких макросів @@ -1665,7 +1665,7 @@ same time. The one with the highest priority will be triggered. Open Folder - Open Folder + Відкрити теку @@ -1675,7 +1675,7 @@ same time. The one with the highest priority will be triggered. Filter by file content, case-insensitive. Regular expressions are supported. - Filter by file content, case-insensitive. Regular expressions are supported. + Фільтрувати за вмістом файлу, без урахування регістру. Підтримуються регулярні вирази. @@ -1728,12 +1728,12 @@ This file already exists. Do not show again - Не показувати знову + Більше не показувати Guided Walkthrough - Інтерактивний тур + Кероване налаштування @@ -1741,25 +1741,25 @@ This file already exists. Note: your changes will be applied when you next switch workbenches - Ви отримаєте інструкцію з налаштування цього макросу у Вашій глобальній панелі інструментів. Інструкції будуть виділені червоним текстом у вікні діалогу. + Ви отримаєте інструкцію з налаштування цього макросу у вашій глобальній панелі інструментів. Інструкції будуть виділені червоним текстом у вікні діалогу. -Примітка: ваші зміни будуть застосовані під час наступної зміни робочого середовища +Примітка: ваші зміни будуть застосовані під час наступної зміни робочого простору Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close - Покрокова Інструкція: Заповніть відсутні поля (опціонально) потім натисніть кнопку Додати, потім Закрити + Інструкція керованого налаштування: Заповніть відсутні поля (необов'язково), потім натисніть "Додати", потім "Закрити" Walkthrough instructions: Select macro from list, then click right arrow button (->), then Close. - Інструкція покроково: Виберіть макрос зі списку, натисніть кнопку зі стрілкою вправо (→), потім — Закрити. + Інструкція керованого налаштування: Виберіть макрос зі списку, натисніть кнопку зі стрілкою вправо (→), потім — "Закрити". Walkthrough instructions: Click New, select macro, then right arrow (->) button, then Close. - Walkthrough instructions: Click New, select macro, then right arrow (->) button, then Close. + Інструкція керованого налаштування: Натисніть "Створити", виберіть макрос, потім кнопку зі стрілкою вправо (→), потім — "Закрити". @@ -1769,38 +1769,38 @@ Note: your changes will be applied when you next switch workbenches Read-Only - Read-Only + Лише для читання Enter a file name: - Enter a file name: + Введіть ім'я файлу: Delete the macro '%1'? - Delete the macro '%1'? + Видалити макрос '%1'? Walkthrough, Dialog 1 of 2 - Walkthrough, Dialog 1 of 2 + Кероване налаштування, Діалог 1 з 2 Walkthrough, Dialog 1 of 1 - Walkthrough, Dialog 1 of 1 + Кероване налаштування, Діалог 1 з 1 Walkthrough, Dialog 2 of 2 - Walkthrough, Dialog 2 of 2 + Кероване налаштування, Діалог 2 з 2 Enter new name - Enter new name + Введіть нове ім'я @@ -1820,12 +1820,12 @@ Note: your changes will be applied when you next switch workbenches Failed to rename to '%1'. Perhaps a file permission error? Помилка перейменування '%1'. -Можливо помилка доступу до файлу? +Можливо, помилка дозволу доступу до файлу? Duplicate Macro - Створити копію макроса + Створити копію макросу @@ -1836,8 +1836,8 @@ Perhaps a file permission error? Failed to duplicate to '%1'. Perhaps a file permission error? - Помилка дублювання '%1'. -Можливо помилка доступу до файлу? + Помилка створення копії '%1'. +Можливо, помилка дозволу доступу до файлу? @@ -1850,7 +1850,7 @@ Perhaps a file permission error? Macro Name - Macro Name + Назва макросу @@ -2973,7 +2973,7 @@ bounding box size of the 3D object that is currently displayed. Cache Directory - Cache Directory + Каталог кешу @@ -3294,41 +3294,41 @@ besides the color bar Show format documentation - Show format documentation + Показати документацію формату Using undo/redo in documents - Using undo/redo in documents + Використання скасування/повторення в документах Maximum undo/redo steps - Maximum undo/redo steps + Максимальна кількість кроків скасування/повторення How many undo/redo steps should be recorded - How many undo/redo steps should be recorded + Скільки кроків скасування/повторення слід записувати Allow user aborting document recomputation by pressing Esc. This feature may slightly increase recomputation time. - Allow user aborting document recomputation by pressing Esc. -This feature may slightly increase recomputation time. + Дозволити користувачеві переривати перерахунок документа натисканням Esc. +Ця функція може дещо збільшити час перерахунку. Add thumbnail to project file when saving - Add thumbnail to project file when saving + Додавати мініатюру до файлу проєкту при збереженні Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512. - Sets the size of the thumbnail that is stored in the document. -Common sizes are 128, 256 and 512. + Встановлює розмір мініатюри, що зберігається в документі. +Звичайні розміри: 128, 256 та 512. @@ -3544,7 +3544,7 @@ You can also use the form: John Doe <john@doe.com> Show format documentation - Show format documentation + Показати документацію формату @@ -4136,19 +4136,19 @@ Mouse tilting is not disabled by this setting. 3D navigation - 3D navigation + 3D-навігація Lists the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - Lists the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + Показує конфігурації кнопок миші для кожного обраного налаштування навігації. +Виберіть набір і натисніть кнопку, щоб переглянути ці конфігурації. Mouse Configuration - Mouse Configuration + Конфігурація миші @@ -4460,7 +4460,7 @@ A larger value makes it easier to select elements, but may prevent selection of Background Color - Background Color + Колір тла @@ -4502,7 +4502,7 @@ A larger value makes it easier to select elements, but may prevent selection of Tree View - Tree View + Деревовидний перегляд @@ -4542,7 +4542,7 @@ A larger value makes it easier to select elements, but may prevent selection of Object being edited - Обʼєкт редагувався + Об'єкт, що редагується @@ -4577,7 +4577,7 @@ A larger value makes it easier to select elements, but may prevent selection of Units Converter - Units Converter + Конвертер одиниць виміру @@ -4587,7 +4587,7 @@ A larger value makes it easier to select elements, but may prevent selection of Input the unit for the result - Input the unit for the result + Введіть одиницю виміру для результату @@ -4621,33 +4621,33 @@ To add a calculation press Return in the value input field Unit system to be used for the Quantity. The preference system is the one set in the general preferences. - Unit system to be used for the Quantity. -The preference system is the one set in the general preferences. + Система одиниць, яка буде використовуватися для величини. +Бажана система - це та, що встановлена в загальних налаштуваннях. Decimals - Decimals + Знаків після коми Decimals for the quantity - Decimals for the quantity + Кількість знаків після коми для величини Unit category - Unit category + Категорія одиниць Unit category for the quantity - Unit category for the quantity + Категорія одиниць для величини Copies the result to the clipboard - Copies the result to the clipboard + Копіює результат у буфер обміну @@ -5491,44 +5491,44 @@ originally selected prior to opening this dialog Normal Messages - Normal Messages + Звичайні повідомлення Log Messages - Log Messages + Повідомлення журналу Critical Messages - Critical Messages + Критичні повідомлення Redirect Python Output - Redirect Python Output + Перенаправляти вивід Python Redirect Python Errors - Redirect Python Errors + Перенаправляти помилки Python Go to End - Go to End + Перейти до кінця Save As… - Save As… + Зберегти як… Plain text files - Plain text files + Текстові файли @@ -5539,7 +5539,7 @@ originally selected prior to opening this dialog Display Message Types - Display Message Types + Відображати типи повідомлень @@ -5550,7 +5550,7 @@ originally selected prior to opening this dialog Show Report View On - Show Report View On + Показувати панель звіту при: @@ -5956,7 +5956,7 @@ Save all changes? Scroll mouse wheel - Прокрутити колесо миші + Прокрутіть колесо миші @@ -6065,12 +6065,12 @@ Save all changes? Макроси - + Macro file doesn't exist Файл макросу не існує - + No such macro file: '%1' Немає такого макросу: '%1' @@ -6421,72 +6421,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit Редагувати - + property властивість - + Copy Копіювати - + Add Property Add Property - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property Delete Property - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group Перейменувати групу властивостей - + Group name: Назва Групи: @@ -6693,7 +6693,7 @@ Exit without saving all data? Press Shift and middle mouse button - Press Shift and middle mouse button + Натисніть Shift і середню кнопку миші @@ -6952,7 +6952,7 @@ Specify another directory? Scroll mouse wheel - Прокрутити колесо миші + Прокрутіть колесо миші @@ -7340,7 +7340,7 @@ Specify another directory? Finish Editing - Finish Editing + Завершити редагування @@ -7712,7 +7712,7 @@ Specify another directory? Tree View - Tree View + Деревовидний перегляд @@ -7834,17 +7834,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version Неправильна версія OpenGL - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception Виняток @@ -8432,12 +8481,12 @@ Choose 'Abort' to abort Не вдається відкрити Ваш системний браузер. - + Out of memory Не вистачає памʼяті - + Not enough memory available to display the data. Недостатньо памʼяті для показу даних. @@ -8453,7 +8502,7 @@ Choose 'Abort' to abort Не вдається знайти файл %1 ні в %2 , ні в %3 - + Navigation styles Стилі навігації @@ -8503,11 +8552,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros Не дозволено видаляти системні макроси - - - Origin - Початок координат - Delete group content? @@ -11970,7 +12014,7 @@ the region are non-opaque. Tree View - Tree View + Деревовидний перегляд @@ -12668,7 +12712,7 @@ the region are non-opaque. Scroll mouse wheel - Прокрутити колесо миші + Прокрутіть колесо миші @@ -13452,7 +13496,7 @@ Proceed? Variable Set - Variable Set + Набір змінних (VarSet) @@ -14342,7 +14386,7 @@ This makes the docked panel stay transparent at all times. Tree View - Tree View + Деревовидний перегляд @@ -14360,38 +14404,38 @@ This makes the docked panel stay transparent at all times. Invalid property name: %1 - Invalid property name: %1 + Некоректна назва властивості: %1 Unknown object - Unknown object + Невідомий об'єкт the name cannot be empty - the name cannot be empty + назва не може бути порожньою %1 is a unit - %1 is a unit + %1 є одиницею вимірювання %1 is a constant - %1 is a constant + %1 є константою %1 already exists - %1 already exists + %1 вже існує Invalid group name: %1 - Invalid group name: %1 + Некоректна назва групи: %1 @@ -14482,7 +14526,7 @@ This makes the docked panel stay transparent at all times. Scroll mouse wheel - Прокрутити колесо миші + Прокрутіть колесо миші @@ -14516,12 +14560,12 @@ This makes the docked panel stay transparent at all times. Not a number - Not a number + Це не число Unit mismatch between result and required unit - Unit mismatch between result and required unit + Невідповідність одиниці вимірювання між необхідною та результату diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 271de8ccdb..7725735da6 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -558,22 +558,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename 重命名 - + Renames the object 重命名对象 - + Finish Editing 完成编辑 - + Finishes editing the object 完成编辑对象 @@ -1349,72 +1349,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars 工具栏 - + Category 类别 - + Move Right 右移 - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left 左移 - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up 上移 - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down 下移 - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New 新建 - + Rename 重命名 - + Delete 删除 - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">注意：</span>更改将在下次加载相应的工作台时生效。</p></body></html> @@ -6061,12 +6061,12 @@ Save all changes? 宏 - + Macro file doesn't exist 宏文件不存在 - + No such macro file: '%1' 没有这样的宏文件: '%1' @@ -6417,72 +6417,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit 编辑 - + property 属性 - + Copy 复制 - + Add Property 添加属性 - + Rename Property Group Rename Property Group - + Rename Property Rename Property - + Delete Property 删除属性 - + Rename property Rename property - + Show Hidden Show Hidden - + Auto-Expand Auto-Expand - + Expression 表达式 - + Property name Property name - + Rename property group 重命名属性组 - + Group name: 组名: @@ -7830,17 +7830,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version 无效的 OpenGL 版本 - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception 异常 @@ -8428,12 +8477,12 @@ Choose 'Abort' to abort 无法打开您的系统浏览器. - + Out of memory 内存不足 - + Not enough memory available to display the data. 没有足够的可用内存来显示数据. @@ -8449,7 +8498,7 @@ Choose 'Abort' to abort 在 %2 或 %3 中找不到文件 %1 - + Navigation styles 导航模式 @@ -8499,11 +8548,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros 不允取删除系统自有宏 - - - Origin - 原点 - Delete group content? diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index daf4eac3b5..21144820f2 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -557,22 +557,22 @@ while doing a left or right click and move the mouse up or down Gui::DAG::Model - + Rename 重新命名 - + Renames the object 重新命名物件 - + Finish Editing 完成編輯 - + Finishes editing the object 完成編輯物件 @@ -1349,72 +1349,72 @@ same time. The one with the highest priority will be triggered. Gui::Dialog::DlgCustomToolbars - + Toolbars 工具列 - + Category 類別 - + Move Right 往右移動 - + <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level down.</b><p>This will also change the level of the parent item.</p> - + Move Left Move Left - + <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> <b>Moves the selected item one level up.</b><p>This will also change the level of the parent item.</p> - + Move Up Move Up - + <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - + Move Down Move Down - + <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> <b>Moves the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - + New 新增 - + Rename 重新命名 - + Delete 刪除 - + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">注意：</span> 此更改將在下次載入相對應的工作台時生效</p></body></html> @@ -6060,12 +6060,12 @@ Save all changes? 巨集 - + Macro file doesn't exist 巨集檔案不存在 - + No such macro file: '%1' 無 '%1'之巨集 @@ -6416,72 +6416,72 @@ How do you want to proceed? Gui::PropertyEditor::PropertyEditor - + Edit 編輯 - + property 屬性 - + Copy 拷貝 - + Add Property 增加屬性 - + Rename Property Group 重新命名屬性群組 - + Rename Property 重新命名屬性 - + Delete Property 刪除屬性 - + Rename property Rename property - + Show Hidden 顯示隱藏 - + Auto-Expand Auto-Expand - + Expression Expression - + Property name Property name - + Rename property group 重新命名屬性群組 - + Group name: 群組名稱： @@ -7825,17 +7825,66 @@ Check the report view for more details. %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. - + Invalid OpenGL Version 無效的 OpenGL 版本 - + + Welcome to %1 v%2.%3 + Welcome to %1 v%2.%3 + + + + Welcome to %1 v%2.%3 + + + Welcome to %1 v%2.%3 + + + + + + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + Configuration data and addons from previous program version found. Migrate the old configuration to this version? + + + + Migrating + Migrating + + + + Migrating configuration data and addons... + Migrating configuration data and addons... + + + + Migration complete. Restarting... + Migration complete. Restarting... + + + + Restarting + Restarting + + + + Migration failed + Migration failed + + + + Migration failed. See the Report View for details. + Migration failed. See the Report View for details. + + + Exception 異常 @@ -8419,12 +8468,12 @@ Choose 'Abort' to abort 無法打開您的系統瀏覽器。 - + Out of memory 記憶體不足 - + Not enough memory available to display the data. 沒有足夠的記憶體可用來顯示資料。 @@ -8440,7 +8489,7 @@ Choose 'Abort' to abort 在%2與%3中找不到檔案 %1 - + Navigation styles 導航模式 @@ -8490,11 +8539,6 @@ Choose 'Abort' to abort Not allowed to delete system-wide macros 不允取刪除系統範圍之巨集 - - - Origin - 原點 - Delete group content? diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly.ts index a19c3426c6..9647983845 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly.ts @@ -63,7 +63,7 @@ - + Active object @@ -862,20 +862,73 @@ The files are named "runPreDrag.asmt" and "dragging.log" and AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? - + Move part + + + ViewProviderAssembly + and %1 more + + + + + Empty Assembly + + + + + Over-constrained: + + + + + Malformed joints: + + + + + Redundant joints: + + + + + Partially redundant: + + + + + Solver failed to converge + + + + + Under-constrained: + + + + + %n Degrees of Freedom + + + + + + + Fully constrained + + Assembly_CreateJointScrew @@ -1432,4 +1485,32 @@ Grounding a part permanently locks its position in the assembly, preventing any + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + + + + + Click to select these conflicting joints. + + + + + Click to select these redundant joints. + + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + + Click to select these malformed joints. + + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_be.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_be.ts index 6561c56d15..0829b13715 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_be.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_be.ts @@ -65,7 +65,7 @@ Assembly - + Active object Бягучы аб'ект @@ -900,20 +900,76 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Аб'ект, які звязаны з адным ці некалькімі злучэннямі. - + Do you want to move the object and delete associated joints? Ці жадаеце вы перамясціць аб'ект і выдаліць звязаныя з ім злучэнні? - + Move part Рухаць дэталь + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Празмерна-абмежаваны: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Часткова залішнія: + + + + Solver failed to converge + Сродку рашэння не атрымалася сысціся + + + + Under-constrained: + Недастаткова абмежаваны: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Цалкам абмежаваны + Assembly_CreateJointScrew @@ -1487,4 +1543,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Уставіць кампанент + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.ts index 56cc166cb5..6481e09178 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ca.ts @@ -63,7 +63,7 @@ Assembly - + Active object Objecte actiu @@ -883,20 +883,76 @@ Els fitxers s'anomenen "runPreDrag.asmt" i "dragging.log" i es troben al directo AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. L'objecte està associat a una o més juntures. - + Do you want to move the object and delete associated joints? Vols moure l'objecte i eliminar les juntures associades? - + Move part Moure peça + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Sobre-restringit: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Parcialment redundant: + + + + Solver failed to converge + + +El solucionador no ha pogut convergir + + + + Under-constrained: + Sub-restringit: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Esbós completament restringit + Assembly_CreateJointScrew @@ -1454,4 +1510,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insereix un Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.ts index 079853ecbe..63945b434a 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_cs.ts @@ -63,7 +63,7 @@ Sestava - + Active object Aktivní objekt @@ -884,20 +884,76 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Objekt je přiřazen k jednomu nebo více spojům. - + Do you want to move the object and delete associated joints? Chcete objekt přesunout a odstranit související spoje? - + Move part Přesunout díl + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Převazbené: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Částečně nadbytečné: + + + + Solver failed to converge + Řešič nezkonvergoval + + + + Under-constrained: + Nedostatečně omezený: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Plně zavazbené + Assembly_CreateJointScrew @@ -1455,4 +1511,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Vložit komponent + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts index bdb5596216..30c7cb695e 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts @@ -63,7 +63,7 @@ Assembly - + Active object Aktives Objekt @@ -193,7 +193,7 @@ Select 2 elements from 2 separate parts - Select 2 elements from 2 separate parts + 2 Elemente von 2 separaten Bauteilen auswählen @@ -203,7 +203,7 @@ Thread pitch - Thread pitch + Gewindesteigung @@ -338,7 +338,7 @@ If the new document is not saved the new part cannot be linked in the assembly. - If the new document is not saved the new part cannot be linked in the assembly. + Wurde das neue Dokument noch nicht gespeichert, kann das neue Bauteil nicht in der Baugruppe verknüpft werden. @@ -353,7 +353,7 @@ Do not Link - Do not Link + Nicht verknüpfen @@ -363,7 +363,7 @@ In capital are variables that you need to replace with actual values. More details about each example in its tooltip. - In capital are variables that you need to replace with actual values. More details about each example in its tooltip. + Großgeschriebenen Variablen müssen durch richtige Werte ersetzt werden. Weitere Einzelheiten zu jedem Beispiel finden sich in den zugehörigen Quick-Infos. @@ -531,74 +531,74 @@ SLOPE definiert die Steilheit des Übergangs zwischen 0 und H1 und H2 auf 0 übe This is the local coordinate system within Reference1's object that will be used for the joint - This is the local coordinate system within Reference1's object that will be used for the joint + Dies ist das lokale Koordinatensystem im Objekt von Reference1, das für die Verbindung verwendet wird This prevents Placement1 from recomputing, enabling custom positioning of the placement - This prevents Placement1 from recomputing, enabling custom positioning of the placement + Dies verhindert die Neuberechnung der Eigenschaft Placement1, wodurch eine benutzerdefinierte Einstellung dieser Positionierung ermöglicht wird This is the attachment offset of the first connector of the joint - This is the attachment offset of the first connector of the joint + Dies ist der Befestigungsversatz an der ersten Verbindungsstelle der Verbindung This is the local coordinate system within Reference2's object that will be used for the joint - This is the local coordinate system within Reference2's object that will be used for the joint + Dies ist das lokale Koordinatensystem im Objekt von Reference2, das für die Verbindung verwendet wird This prevents Placement2 from recomputing, enabling custom positioning of the placement - This prevents Placement2 from recomputing, enabling custom positioning of the placement + Dies verhindert die Neuberechnung der Eigenschaft Placement2, wodurch eine benutzerdefinierte Einstellung dieser Positionierung ermöglicht wird This is the attachment offset of the second connector of the joint - This is the attachment offset of the second connector of the joint + Dies ist der Befestigungsversatz an der zweiten Verbindungsstelle der Verbindung Enable the minimum length limit of the joint - Enable the minimum length limit of the joint + Aktiviert den unteren Längengrenzwert der Verbindung Enable the maximum length limit of the joint - Enable the maximum length limit of the joint + Aktiviert den oberen Längengrenzwert der Verbindung Enable the minimum angle limit of the joint - Enable the minimum angle limit of the joint + Aktiviert den unteren Winkelgrenzwert der Verbindung Enable the maximum angle limit of the joint - Enable the maximum angle limit of the joint + Aktiviert den oberen Winkelgrenzwert der Verbindung This is the minimum limit for the length between both coordinate systems (along their z-axis) - This is the minimum limit for the length between both coordinate systems (along their z-axis) + Dies ist der untere Grenzwert für den Abstand zwischen beiden Koordinatensystemen (entlang ihrer Z-Achse) This is the maximum limit for the length between both coordinate systems (along their z-axis) - This is the maximum limit for the length between both coordinate systems (along their z-axis) + Dies ist der obere Grenzwert für den Abstand zwischen beiden Koordinatensystemen (entlang ihrer Z-Achse) This is the minimum limit for the angle between both coordinate systems (between their x-axis) - This is the minimum limit for the angle between both coordinate systems (between their x-axis) + Dies ist der untere Grenzwert für den Winkel zwischen beiden Koordinatensystemen (zwischen ihren X-Achsen) This is the maximum limit for the angle between both coordinate systems (between their x-axis) - This is the maximum limit for the angle between both coordinate systems (between their x-axis) + Dies ist der obere Grenzwert für den Winkel zwischen beiden Koordinatensystemen (zwischen ihren X-Achsen) @@ -884,20 +884,74 @@ Die Dateien heißen "runPreDrag.asmt" und "dragging.log" und befinden sich im St AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Das Objekt gehört zu einer oder mehreren Verbindungen. - + Do you want to move the object and delete associated joints? Soll das Objekt bewegt und zugehörige Verbindungen gelöscht werden? - + Move part Bauteil verschieben + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Überbestimmt: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Teilweise redundant: + + + + Solver failed to converge + Der Gleichungslöser konnte keine Lösung annähern + + + + Under-constrained: + Unterbestimmt: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Vollständig bestimmt + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Das Verankern eines Bauteils setzt seine Position in der Baugruppe fest und verh Komponente einfügen + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.ts index 72c9b99b95..4d6ae6d133 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_el.ts @@ -63,7 +63,7 @@ Assembly - + Active object Active object @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Μετακίνηση εξαρτήματος + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Over-constrained: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Εν μέρει περιττό: + + + + Solver failed to converge + Solver failed to converge + + + + Under-constrained: + Under-constrained: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Fully constrained + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.ts index 691c6f3029..7a7cd05269 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_es-ES.ts @@ -63,7 +63,7 @@ Ensamblaje - + Active object Objeto activo @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. El objeto es asociado a una o más articulaciones. - + Do you want to move the object and delete associated joints? ¿Quiere mover el objeto y eliminar las articulaciones asociadas? - + Move part Mover parte + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Sobre-restringido: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Parcialmente redundante: + + + + Solver failed to converge + El solver falló al converger + + + + Under-constrained: + Sub-restringido: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Totalmente restringido + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insertar componente + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.ts index 66c950dc22..a53df175e3 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_eu.ts @@ -63,7 +63,7 @@ Muntaketa - + Active object Objektu aktiboa @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Move part + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Over-constrained: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Partzialki erredundantea: + + + + Solver failed to converge + Ebazleak ezin izan du konbergitu + + + + Under-constrained: + Under-constrained: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Osorik murritua + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.ts index 6735cb42e5..a5d8473440 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fi.ts @@ -63,7 +63,7 @@ Kokoonpano - + Active object Aktivoi objekti @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Move part + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Ylirajoitettu: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Osittain tarpeettomat: + + + + Solver failed to converge + Ratkaisin epäonnistui yhdistämisessä + + + + Under-constrained: + Alirajoitettu: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Täysin rajoitettu + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Kokoonpano_LisääLinkki['Lisää Komponentti'] + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.ts index 8e636c2a1e..c2d12ad926 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_fr.ts @@ -63,7 +63,7 @@ Assemblage - + Active object Activer/désactiver l'objet @@ -884,20 +884,74 @@ Les fichiers sont nommés « runPreDrag.asmt » et « dragging.log » et se trou AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. L'objet est associé à une ou plusieurs liaisons. - + Do you want to move the object and delete associated joints? Voulez-vous déplacer l'objet et supprimer les liaisons associées ? - + Move part Déplacer une pièce + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Esquisse sur-contrainte : + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Esquisse avec contraintes partiellement redondantes : + + + + Solver failed to converge + Le solveur n'a pas pu converger + + + + Under-constrained: + L'esquisse manque de contraintes : + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Esquisse entièrement contrainte + Assembly_CreateJointScrew @@ -1460,4 +1514,32 @@ Le blocage d'une pièce verrouille définitivement sa position dans l'assemblage Insérer un composant + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.ts index 9778d25bac..60cda5362a 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hr.ts @@ -63,7 +63,7 @@ Montaža - + Active object Aktivni objekt @@ -884,20 +884,75 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Predmet je povezan s jednom ili više spojnica. - + Do you want to move the object and delete associated joints? Želite li premjestiti objekt i izbrisati povezane spojeve? - + Move part Premjesti dio + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Pretjerano ograničeno: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Djelomično suvišno: + + + + Solver failed to converge + Solver nije uspio konvergirati + + + + Under-constrained: + Premalo ograničen: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Potpuno ograničen + Assembly_CreateJointScrew @@ -1455,4 +1510,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Umetni Komponentu + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts index 577e8806f8..b9a59a09e6 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_hu.ts @@ -63,7 +63,7 @@ Összeállítás - + Active object Aktív objektum @@ -885,20 +885,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Az objektum egy vagy több csatlakozással rendelkezik. - + Do you want to move the object and delete associated joints? El akarja mozgatni az objektumot és törölni a hozzá tartozó csatlakozásokat? - + Move part Mozgassa a részt + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Eltúlzott kényszer: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Részben felesleges: + + + + Solver failed to converge + A megoldó nem tudott hasonlítani + + + + Under-constrained: + Nem eléggé kényszerített: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Teljesen kényszertett + Assembly_CreateJointScrew @@ -1456,4 +1510,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Összetevő beszúrás + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.ts index 97ec187c31..179e1d5fe5 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_it.ts @@ -63,7 +63,7 @@ Assembly - + Active object Oggetto attivo @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. L'oggetto è associato a uno o più vincoli. - + Do you want to move the object and delete associated joints? Si desidera spostare l'oggetto ed eliminare i vincoli associati? - + Move part Sposta parte + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Sovravincolato: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Parzialmente ridondante: + + + + Solver failed to converge + Risolutore impossibilitato a convergere + + + + Under-constrained: + Sottovincolato: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Completamente vincolato + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Inserisci componente + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.ts index 553cb0de30..f2248c4436 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ja.ts @@ -63,7 +63,7 @@ アセンブリ - + Active object アクティブなオブジェクト @@ -884,20 +884,73 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. オブジェクトは1つ以上のジョイントに関連付けられています。 - + Do you want to move the object and delete associated joints? オブジェクトを移動して関連付けられているジョイントを削除しますか？ - + Move part パーツを移動 + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + 過剰拘束: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + 部分的に冗長: + + + + Solver failed to converge + ソルバーの収束に失敗 + + + + Under-constrained: + 未拘束: + + + + %n Degrees of Freedom + + %n 自由度 + + + + + Fully constrained + 完全拘束 + Assembly_CreateJointScrew @@ -1455,4 +1508,32 @@ Grounding a part permanently locks its position in the assembly, preventing any コンポーネントを挿入 + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ka.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ka.ts index 0f6b258c77..4f9e5d09f5 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ka.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ka.ts @@ -63,7 +63,7 @@ Assembly - + Active object აქტიური ობიექტი @@ -193,7 +193,7 @@ Select 2 elements from 2 separate parts - Select 2 elements from 2 separate parts + აირჩიეთ 2 ელემენტი 2 განსხვავებული ნაწილიდან @@ -203,7 +203,7 @@ Thread pitch - Thread pitch + კუთხვილის ტონი @@ -338,7 +338,7 @@ If the new document is not saved the new part cannot be linked in the assembly. - If the new document is not saved the new part cannot be linked in the assembly. + თუ ახალი დოკუმენტი შენახული არაა, ახალი ნაწილის ანაწყობთან დაკავშირება შეუძლებელია. @@ -353,7 +353,7 @@ Do not Link - Do not Link + არ დააკავშირო @@ -363,7 +363,7 @@ In capital are variables that you need to replace with actual values. More details about each example in its tooltip. - In capital are variables that you need to replace with actual values. More details about each example in its tooltip. + დიდი ასოებით იწერება ცვლადები, რომლებიც საჭიროა, მიმდინარე მნიშვნელობებით ჩაანაცვლოთ. თითოეული მაგალითის მეტი დეტალები მინიშნებებში შეგიძლიათ, წაიკითხოთ. @@ -531,74 +531,74 @@ SLOPE აღწერს დახრილობას 0-დან H1-მდე This is the local coordinate system within Reference1's object that will be used for the joint - This is the local coordinate system within Reference1's object that will be used for the joint + ეს ლოკალური კოორდინატების სისტემაა მიმართვა1-ის ობიექტში, რომელიც შეერთებისთვის იქნება გამოყენებული This prevents Placement1 from recomputing, enabling custom positioning of the placement - This prevents Placement1 from recomputing, enabling custom positioning of the placement + ეს ხელს უშლის Placement1-ის თავიდან გამოთვლას, რითიც საშუალებას გაძლევთ, მოთავსების პოზიცია სურვილისამებრ მოირგოთ This is the attachment offset of the first connector of the joint - This is the attachment offset of the first connector of the joint + ეს მიიმაგრების წანაცვლებაა პირველი სახსრის დამკავშირებლისთვის This is the local coordinate system within Reference2's object that will be used for the joint - This is the local coordinate system within Reference2's object that will be used for the joint + ეს ლოკალური კოორდინატების სისტემაა მიმართვა2-ის ობიექტში, რომელიც შეერთებისთვის იქნება გამოყენებული This prevents Placement2 from recomputing, enabling custom positioning of the placement - This prevents Placement2 from recomputing, enabling custom positioning of the placement + ეს ხელს უშლის Placement2-ის თავიდან გამოთვლას, რითიც საშუალებას გაძლევთ, მოთავსების პოზიცია სურვილისამებრ მოირგოთ This is the attachment offset of the second connector of the joint - This is the attachment offset of the second connector of the joint + ეს მიიმაგრების წანაცვლებაა მეორე სახსრის დამკავშირებლისთვის Enable the minimum length limit of the joint - Enable the minimum length limit of the joint + სახსრის მინიმალური სიგრძის ლიმიტის ჩართვა Enable the maximum length limit of the joint - Enable the maximum length limit of the joint + სახსრის მაქსიმალური სიგრძის ლიმიტის ჩართვა Enable the minimum angle limit of the joint - Enable the minimum angle limit of the joint + სახსრის მინიმალური კუთხის ლიმიტის ჩართვა Enable the maximum angle limit of the joint - Enable the maximum angle limit of the joint + სახსრის მაქსიმალური კუთხის ლიმიტის ჩართვა This is the minimum limit for the length between both coordinate systems (along their z-axis) - This is the minimum limit for the length between both coordinate systems (along their z-axis) + ეს სიგრძის მინიმალური ზღვარია ორივე კოორდინატების სისტემისთვის (მათი Z ღერძის გასწვრივ) This is the maximum limit for the length between both coordinate systems (along their z-axis) - This is the maximum limit for the length between both coordinate systems (along their z-axis) + ეს სიგრძის მინიმალური ზღვარია ორივე კოორდინატების სისტემისთვის (მათი Z ღერძის გასწვრივ) This is the minimum limit for the angle between both coordinate systems (between their x-axis) - This is the minimum limit for the angle between both coordinate systems (between their x-axis) + ეს კუთხის მინიმალური ზღვარია ორივე კოორდინატების სისტემისთვის (მათ X ღერძებსის შორის) This is the maximum limit for the angle between both coordinate systems (between their x-axis) - This is the maximum limit for the angle between both coordinate systems (between their x-axis) + ეს კუთხის მინიმალური ზღვარია ორივე კოორდინატების სისტემისთვის (მათ X ღერძებსის შორის) @@ -883,20 +883,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. ობიექტი ასოცირებულია ერთ ან მეტ სახსართან. - + Do you want to move the object and delete associated joints? გნებავთ გადაიტანოთ ობიექტი და წაშალოთ ასოცირებული სახსრები? - + Move part ნაწილის გადატანა + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + ზედმეტად-შეზღუდული: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + ნაწილობრივ დამატებითი: + + + + Solver failed to converge + ამომხსნელის შეცდომა შეერთების დროს + + + + Under-constrained: + საკმარისზე ნაკლებად შეზღუდული: + + + + %n Degrees of Freedom + + %n თავისუფლების ხარისხი + %n თავისუფლების ხარისხი + + + + + Fully constrained + სრულად შეზღუდული + Assembly_CreateJointScrew @@ -1454,4 +1508,32 @@ Grounding a part permanently locks its position in the assembly, preventing any კომპონენტის ჩასმა + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts index d529d652f7..f2dad9f4c0 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ko.ts @@ -63,7 +63,7 @@ Assembly - + Active object 대상체 활성화 @@ -884,20 +884,73 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. 이 대상체는 하나 이상의 관절로 연결되어 있습니다. - + Do you want to move the object and delete associated joints? 관절 연결을 삭제하고 이 대상체를 이동시키겠습니까? - + Move part 부품 이동 + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + 과도한 구속: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + 부분적인 중복: + + + + Solver failed to converge + Solver failed to converge + + + + Under-constrained: + 구속되지 않음: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + + + + + Fully constrained + 완전히 구속됨 + Assembly_CreateJointScrew @@ -1455,4 +1508,32 @@ Grounding a part permanently locks its position in the assembly, preventing any 부품 삽입 + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.ts index e18e81071f..6e38c1bb95 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_nl.ts @@ -63,7 +63,7 @@ Samenstelling - + Active object Actief object @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Onderdeel verplaatsen + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Over-bepaald: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Gedeeltelijk overbodig: + + + + Solver failed to converge + Solver kon niet convergeren + + + + Under-constrained: + Onbepaald: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Volledig bepaald + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts index 49978fe697..0aefcef91e 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pl.ts @@ -63,7 +63,7 @@ Złożenie - + Active object Aktywny obiekt @@ -552,7 +552,7 @@ Wartości SLOPE = 1000 lub większe są odpowiednie. This is the attachment offset of the first connector of the joint - This is the attachment offset of the first connector of the joint + To jest odsunięcie dołączenia pierwszego łącznika połączenia @@ -568,7 +568,7 @@ Wartości SLOPE = 1000 lub większe są odpowiednie. This is the attachment offset of the second connector of the joint - This is the attachment offset of the second connector of the joint + To jest odsunięcie dołączenia drugiego łącznika połączenia @@ -753,12 +753,12 @@ Jest on używany tylko przez połączenie zębate do przechowywania drugiego pro Sets the attachment offset of the joint’s first marker (coordinate system) - Sets the attachment offset of the joint’s first marker (coordinate system) + Ustawia odsunięcie dołączenia pierwszego znacznika połączenia (układ współrzędnych) Sets the attachment offset of the second marker (coordinate system) of the joint - Sets the attachment offset of the second marker (coordinate system) of the joint + Ustawia odsunięcie dołączenia drugiego znacznika (układu współrzędnych) połączenia @@ -895,20 +895,76 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Obiekt jest powiązany z jednym lub większą liczbą połączeń. - + Do you want to move the object and delete associated joints? Czy chcesz przenieść obiekt i usunąć powiązane połączenia? - + Move part Przesuń część + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Wiązania nadmierne: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Częściowo nadmiarowe: + + + + Solver failed to converge + Solver nie osiągnął zbieżności + + + + Under-constrained: + Niedostatecznie związane: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + W pełni związany + Assembly_CreateJointScrew @@ -1466,4 +1522,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Wstaw komponent + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.ts index 69d2c03ee5..cf689671fb 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_pt-BR.ts @@ -63,7 +63,7 @@ Assemblagem - + Active object Objeto ativo @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. O objeto está associado a uma ou mais juntas. - + Do you want to move the object and delete associated joints? Você deseja mover o objeto e excluir juntas associadas? - + Move part Mover peça + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Sobre-restrito: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Parcialmente redundante: + + + + Solver failed to converge + O solucionador falhou na conversão + + + + Under-constrained: + Subrestrito: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Totalmente restrito + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Inserir componente + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.ts index 28cd917e24..eeb69bee53 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ro.ts @@ -63,7 +63,7 @@ Ansamblu - + Active object Obiect activ @@ -884,20 +884,75 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Move part + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Supraconstrânse: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Parţial redundant: + + + + Solver failed to converge + Rezolvitorul nu a putut converge + + + + Under-constrained: + Under-constrained: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Complet constrâns + Assembly_CreateJointScrew @@ -1455,4 +1510,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.ts index 6eea86286f..ea1a9cbb3b 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_ru.ts @@ -19,7 +19,7 @@ Inserts a component into the active assembly. This will create dynamic links to parts, bodies, primitives, and assemblies. To insert external components, make sure that the file is <b>open in the current session</b> - Inserts a component into the active assembly. This will create dynamic links to parts, bodies, primitives, and assemblies. To insert external components, make sure that the file is <b>open in the current session</b> + Вставляет компонент в активную сборку. При этом создаются динамические ссылки на детали, тела, примитивы и сборки. Чтобы вставить внешние компоненты, убедитесь, что файл <b>открыт в текущей сессии</b> @@ -52,7 +52,7 @@ Solves the currently active assembly. - Solves the currently active assembly. + Решает текущую активную сборку. @@ -63,7 +63,7 @@ Сборка - + Active object Активный объект @@ -75,17 +75,17 @@ Your sub-assembly is currently rigid. This will make it flexible instead. - Ваша подсборка в настоящее время жесткая. Это сделает ее гибкой. + Ваша подсборка в настоящее время жёсткая. Это сделает её гибкой. Turn rigid - Сделать жесткой + Сделать жёсткой Your sub-assembly is currently flexible. This will make it rigid instead. - Ваша подсборка в настоящее время гибкая. Это сделает ее жесткой. + Ваша подсборка в настоящее время гибкая. Это сделает её жёсткой. @@ -108,7 +108,7 @@ Assembly Joints - Монтажные соединения + Сопряжения @@ -121,12 +121,12 @@ Fixed - Исправлено + Зафиксировано Revolute - Вращение + Поворотное @@ -157,33 +157,33 @@ Perpendicular - Нормаль + Перпендикулярное Angle - Угол + Угловое RackPinion - Реечная шестерня + Реечное Screw - Винтовое + Резьбовое/Шнековое Gears - Шестерни + Шестерёнчатое Belt - Ремень + Ремённое/Цепное @@ -193,17 +193,17 @@ Select 2 elements from 2 separate parts - Select 2 elements from 2 separate parts + Выберите 2 элемента из 2 отдельных деталей Radius 1 - Радиус 1 + Радиус колеса 1 Thread pitch - Thread pitch + Шаг резьбы/витков @@ -273,17 +273,17 @@ Sub-assembly children: the children of sub-assemblies will be included in the bill of materials - Sub-assembly children: the children of sub-assemblies will be included in the bill of materials + Дочерние сборочные узлы: дочерние сборочные узлы будут включены в спецификацию Parts children: the children of parts will be added to the bill of materials - Parts children: the children of parts will be added to the bill of materials + Дочерние детали: дочерние компоненты деталей будут добавлены в спецификацию Only parts: adds only part containers and sub-assemblies to the bill of materials. Solids like Part Design bodies, fasteners, or Part workbench primitives are ignored. - Only parts: adds only part containers and sub-assemblies to the bill of materials. Solids like Part Design bodies, fasteners, or Part workbench primitives are ignored. + Только детали: добавляет в спецификацию только контейнеры деталей и подсборки. Твёрдые тела, такие как тела Проектной Детали (Part Design), крепёжные детали или примитивы верстака Деталь (Part), игнорируются. @@ -293,12 +293,12 @@ Custom columns : 'Description' and other custom columns you add by clicking on 'Add column' will not have their data overwritten. If a column name starts with '.' followed by a property name (e.g. '.Length'), it will be auto-populated with that property value. These columns can be renamed by double-clicking or pressing F2 (renaming a column will currently lose its data). - Custom columns : 'Description' and other custom columns you add by clicking on 'Add column' will not have their data overwritten. If a column name starts with '.' followed by a property name (e.g. '.Length'), it will be auto-populated with that property value. These columns can be renamed by double-clicking or pressing F2 (renaming a column will currently lose its data). + Пользовательские столбцы: данные в столбцах 'Описание' и других пользовательских столбцах, добавленных нажатием кнопки 'Добавить столбец' не будут перезаписаны. Если название столбца начинается с '.', за которым следует название свойства (например, '.Length'), оно будет автоматически заполнено значением этого свойства. Эти столбцы можно переименовать, дважды щёлкнув по ним или нажав клавишу F2 (при переименовании столбца его данные будут утеряны). Any column (custom or not), can be deleted by pressing the Delete key - Any column (custom or not), can be deleted by pressing the Delete key + Любой столбец (пользовательский или нет) можно удалить, нажав клавишу Delete @@ -308,17 +308,17 @@ The exported file format can be customized in the Spreadsheet workbench preferences - The exported file format can be customized in the Spreadsheet workbench preferences + Формат экспортируемого файла можно настроить в параметрах верстака Электронная Таблица (Spreadsheet) Auto columns : (Index, Quantity, Name...) are populated automatically. Any modification you make will be overridden. These columns cannot be renamed. - Автостолбцы: (Индекс, Количество, Имя...) заполняются автоматически. Любые внесенные вами изменения будут переопределены. Эти столбцы нельзя переименовать. + Автостолбцы: (Индекс, Количество, Имя...) заполняются автоматически. Любые внесённые вами изменения будут отменены. Эти столбцы нельзя переименовать. Part name - Наименование детали + Имя детали @@ -328,17 +328,17 @@ Create part in new file - Создать часть в новом файле + Создать деталь в новом файле Joint new part origin - Создание новой детали соединения + Присоединить начало координат новой детали If the new document is not saved the new part cannot be linked in the assembly. - If the new document is not saved the new part cannot be linked in the assembly. + Если новый документ не сохранён, новую деталь нельзя будет присоединить к сборке. @@ -353,7 +353,7 @@ Do not Link - Do not Link + Не создавать Ссылки @@ -363,12 +363,12 @@ In capital are variables that you need to replace with actual values. More details about each example in its tooltip. - In capital are variables that you need to replace with actual values. More details about each example in its tooltip. + В заголовках есть переменные, которые необходимо заменить фактическими значениями. Более подробная информация о каждом случае приведена в его всплывающей подсказке. - Linear: C + VEL*time - - Линейка: C + VEL*time + - Линейный: C + VEL*time @@ -378,7 +378,7 @@ - Harmonic: C + AMP*sin(VEL*time - PHASE) - - Гармоничный: C + AMP*sin(VEL*time - PHASE) + - Гармонический: C + AMP*sin(VEL*time - PHASE) @@ -388,24 +388,24 @@ - Smooth Step: L1 + (L2 - L1)*((1/2) + (1/pi)*arctan(SLOPE*(time - T0))) - - Плавный шаг: L1 + (L2 - L1)*(1/2) + (1/pi)*arctan(SLOPE*(время - T0))) + - Плавный шаг: L1 + (L2 - L1)*(1/2) + (1/pi)*arctan(УКЛОН*(время - T0))) - Smooth Square Impulse: (H/pi)*(arctan(SLOPE*(time - T1)) - arctan(SLOPE*(time - T2))) - - Плавный квадратный импульс: (H/pi)*(арктан(SLOPE*(время - T1)) - арктан(SLOPE*(время - T2))) + - Плавный квадратичный импульс: (H/pi)*(arctan(УКЛОН*(время - T1)) - arctan(УКЛОН*(время - T2))) - Smooth Ramp Top Impulse: ((1/pi)*(arctan(1000*(time - T1)) - arctan(1000*(time - T2))))*(((H2 - H1)/(T2 - T1))*(time - T1) + H1) - Плавный верхний импульс рампы: ((1/pi)*(arctan(1000*(time - T1)) - arctan(1000*(time - T2))))*(((H2 - H1)/(T2 - T1))*(time - T1) + H1) + Импульс с плавной верхней площадкой: ((1/pi)*(arctan(1000*(время - T1)) - arctan(1000*(время - T2))))*(((H2 - H1)/(T2 - T1))*(время - T1) + H1) C is a constant offset. VEL is a velocity or slope or gradient of the straight line. - C - константа. -VEL - это скорость или уклон или градиент прямой линии. + C - постоянное смещение. +VEL - скорость или уклон или градиент прямой линии. @@ -441,7 +441,7 @@ L2 is step level after time = T0. SLOPE defines the steepness of the transition between L1 and L2 about time = T0. Higher values gives sharper cornered steps. SLOPE = 1000 or greater are suitable. L1 — уровень ступени до времени = T0. L2 — уровень ступени после времени = T0. -SLOPE определяет крутизну перехода между L1 и L2 около времени = T0. Более высокие значения дают более острые угловые ступени. Подходят SLOPE = 1000 или больше. +УКЛОН (SLOPE) определяет крутизну перехода между L1 и L2 около времени = T0. Более высокие значения дают более острые угловые ступени. Подходит УКЛОН = 1000 или больше. @@ -452,7 +452,7 @@ SLOPE defines the steepness of the transition between 0 and H about time = T1 an H — высота импульса. T1 — начало импульса. T2 — конец импульса. -SLOPE определяет крутизну перехода между 0 и H относительно времени = T1 и T2. Более высокие значения дают более острые угловые импульсы. Подходят SLOPE = 1000 или больше. +УКЛОН (SLOPE) определяет крутизну перехода между 0 и H относительно времени = T1 и T2. Более высокие значения дают более острые угловые импульсы. Подходит УКЛОН = 1000 или больше. @@ -462,12 +462,12 @@ T2 is the end of the impulse. H1 is the height at T1 at the beginning of the ramp. H2 is the height at T2 at the end of the ramp. SLOPE defines the steepness of the transition between 0 and H1 and H2 to 0 about time = T1 and T2 respectively. Higher values gives sharper cornered impulses. SLOPE = 1000 or greater are suitable. - Это похоже на квадратный импульс, но сверху есть наклонный скат. Это хорошо для построения плавной кусочно-линейной функции путем добавления ряда из них. + Это похоже на квадратный импульс, но сверху есть наклонная площадка. Это хорошо для построения плавной фрагментно-линейной функции путём добавления ряда таких элементов. T1 — начало импульса. T2 — конец импульса. H1 — высота в точке T1 в начале ската. H2 — высота в точке T2 в конце ската. -SLOPE определяет крутизну перехода между 0 и H1 и H2 к 0 примерно за время = T1 и T2 соответственно. Более высокие значения дают более острые угловые импульсы. SLOPE = 1000 или больше подходят. +УКЛОН (SLOPE) определяет крутизну перехода между 0 и H1 и H2 к 0 примерно за время = T1 и T2 соответственно. Более высокие значения дают более острые угловые импульсы. Подходит УКЛОН = 1000 или больше. @@ -498,7 +498,7 @@ SLOPE определяет крутизну перехода между 0 и H1 Grounding - Grounding + Фиксация @@ -531,84 +531,84 @@ SLOPE определяет крутизну перехода между 0 и H1 This is the local coordinate system within Reference1's object that will be used for the joint - This is the local coordinate system within Reference1's object that will be used for the joint + Это локальная система координат внутри объекта Reference1 (Источник1), которая будет использоваться для создания соединения This prevents Placement1 from recomputing, enabling custom positioning of the placement - This prevents Placement1 from recomputing, enabling custom positioning of the placement + Это предотвращает пересчёт Placement1 (Размещение1), позволяя настроить индивидуальное расположение размещения This is the attachment offset of the first connector of the joint - This is the attachment offset of the first connector of the joint + Это смещение присоединения (attachment) первого коннектора соединения This is the local coordinate system within Reference2's object that will be used for the joint - This is the local coordinate system within Reference2's object that will be used for the joint + Это локальная система координат внутри объекта Reference2 (Источник2), которая будет использоваться для создания соединения This prevents Placement2 from recomputing, enabling custom positioning of the placement - This prevents Placement2 from recomputing, enabling custom positioning of the placement + Это предотвращает пересчёт Placement2 (Размещение2), позволяя настроить индивидуальное расположение размещения This is the attachment offset of the second connector of the joint - This is the attachment offset of the second connector of the joint + Это смещение присоединения (attachment) второго коннектора соединения Enable the minimum length limit of the joint - Enable the minimum length limit of the joint + Включить ограничение минимальной длины соединения Enable the maximum length limit of the joint - Enable the maximum length limit of the joint + Включить ограничение максимальной длины соединения Enable the minimum angle limit of the joint - Enable the minimum angle limit of the joint + Включить ограничение минимального угла соединения Enable the maximum angle limit of the joint - Enable the maximum angle limit of the joint + Включить ограничение максимального угла соединения This is the minimum limit for the length between both coordinate systems (along their z-axis) - This is the minimum limit for the length between both coordinate systems (along their z-axis) + Это минимальный предел длины между обеими системами координат (вдоль их осей z) This is the maximum limit for the length between both coordinate systems (along their z-axis) - This is the maximum limit for the length between both coordinate systems (along their z-axis) + Это максимальный предел длины между обеими системами координат (вдоль их осей z) This is the minimum limit for the angle between both coordinate systems (between their x-axis) - This is the minimum limit for the angle between both coordinate systems (between their x-axis) + Это минимальный допустимый угол между двумя системами координат (между их осями x) This is the maximum limit for the angle between both coordinate systems (between their x-axis) - This is the maximum limit for the angle between both coordinate systems (between their x-axis) + Это максимальный допустимый угол между двумя системами координат (между их осями x) The second reference of the joint - Вторая ссылка на совместное + Второй источник соединения The first object of the joint - Первый объект объединения + Первый объект соединения @@ -618,22 +618,22 @@ SLOPE определяет крутизну перехода между 0 и H1 This is the distance of the joint. It is used only by the Distance joint and Rack and Pinion (pitch radius), Screw and Gears and Belt (radius1) - Это расстояние соединения. Используется только дистанционным соединением и зубчатой ​​рейкой (радиус шага), винтом и шестернями и ремнем (радиус 1) + Это расстояние в сопряжении. Оно используется только в сопряжениях "Дистанционное", "Реечное" (радиус шага), "Резьбовое", "Шестерёнчатое" и "Ремённое/Цепное" (radius1 - радиус1) This is the second distance of the joint. It is used only by the gear joint to store the second radius. - Это второе расстояние сустава. Он используется только зубчатым соединением для хранения второго радиуса. + Это второе расстояние в сопряжении. Оно используется только в "Шестерёнчатом" сопряжении для хранения радиуса второго колеса. The {order} reference of the joint - Ссылка {order} на соединение + Ссылка {order} на сопряжение The object to ground - Объект для закрепления + Объект для фиксации @@ -644,32 +644,32 @@ SLOPE определяет крутизну перехода между 0 и H1 This is the movement of the move. The end placement is the result of the start placement * this placement. - Это движение движения. Конечное размещение является результатом начального размещения * этого размещения. + Это ход инструмента "Переместить". Конечное расположение является результатом начального размещения * данного размещения. The type of the move - Тип хода + Тип перемещения Simulation start time. - Время начала моделирования. + Время начала симуляции. Simulation end time. - Время окончания моделирования. + Время окончания симуляции. Simulation time step for output. - Шаг времени моделирования для вывода. + Шаг времени симуляции для вывода. Integration global error tolerance. - Интегральная глобальная ошибка допусков. + Глобальная точность погрешности интеграции. @@ -684,12 +684,12 @@ SLOPE определяет крутизну перехода между 0 и H1 The joint that is moved by the motion - Шарнир, который перемещается при движении + Сопряжение, которое перемещается при движении This is the formula of the motion. For example '1.0*time'. - Это формула движения. Например, «1.0 * время». + Это формула движения. Например '1,0 * время'. @@ -702,12 +702,12 @@ SLOPE определяет крутизну перехода между 0 и H1 Distance - Расстояние + Дистанционное Radius 2 - Радиус 2 + Радиус колеса 2 @@ -717,7 +717,7 @@ SLOPE определяет крутизну перехода между 0 и H1 Rotation - Вращение + Поворот @@ -737,22 +737,22 @@ SLOPE определяет крутизну перехода между 0 и H1 Joint - Joint + Сопряжение Sets the attachment offset of the joint’s first marker (coordinate system) - Sets the attachment offset of the joint’s first marker (coordinate system) + Устанавливает смещение привязки первого маркера соединения (системы координат) Sets the attachment offset of the second marker (coordinate system) of the joint - Sets the attachment offset of the second marker (coordinate system) of the joint + Устанавливает смещение привязки второго маркера соединения (системы координат) Reverse the direction of the joint - Reverse the direction of the joint + Развернуть направление соединения @@ -800,12 +800,12 @@ SLOPE определяет крутизну перехода между 0 и H1 Search parts… - Search parts… + Поиск деталей… Cannot find the part? - Cannot find the part? + Не удалось найти деталь? @@ -815,7 +815,7 @@ SLOPE определяет крутизну перехода между 0 и H1 Shows only parts in the list - Shows only parts in the list + Показать только детали из списка @@ -829,16 +829,16 @@ Rigid means that the added sub-assembly will be considered as a solid unit withi Flexible means that the added sub-assembly will allow movement of its individual components' joints within the parent assembly. You can change this behavior at any time by either right-clicking the sub-assembly on the document tree and toggling the 'Turn rigid'/'Turn flexible' command there, or by editing its Rigid property in the property editor. - Sets whether the inserted sub-assemblies will be rigid or flexible. -Rigid means that the added sub-assembly will be considered as a solid unit within the parent assembly. -Flexible means that the added sub-assembly will allow movement of its individual components' joints within the parent assembly. -You can change this behavior at any time by either right-clicking the sub-assembly on the document tree and toggling the -'Turn rigid'/'Turn flexible' command there, or by editing its Rigid property in the property editor. + Устанавливает, будут ли вставленные подсборки жёсткими или подвижными. +Жёсткие подсборки будут рассматриваться как единое целое внутри родительской сборки. +Подвижные подсборки позволяют отдельным компонентам двигаться внутри родительской сборки. +Вы можете изменить это поведение в любое время, щёлкнув правой кнопкой мыши по подсборке в дереве проекта и выбрав команду +'Сделать жёсткой (Turn rigid)'/'Сделать подвижной (Turn flexible)' или отредактировав её свойство Жёсткость (Rigid) в редакторе свойств. Rigid sub-assemblies - Жёсткие подсистемы + Жёсткие подсборки @@ -851,65 +851,121 @@ You can change this behavior at any time by either right-clicking the sub-assemb Allows leaving edit mode when pressing the Esc key - Allows leaving edit mode when pressing the Esc key + Позволяет выйти из режима редактирования при нажатии клавиши Esc Log the dragging steps of the solver. Useful to report a bug. The files are named "runPreDrag.asmt" and "dragging.log" and are located in the default directory of std::ofstream (on Windows it's the desktop) - Log the dragging steps of the solver. Useful to report a bug. -The files are named "runPreDrag.asmt" and "dragging.log" and are located in the default directory of std::ofstream (on Windows it's the desktop) + Записывать шаги решателя при перетаскивании. Полезно для регистрации сообщений об ошибках. +Файлы имеют имена "runPreDrag.asmt" и "dragging.log" и находятся в стандартном каталоге std::ofstream (в Windows это рабочий стол) Ground first part - Ground first part + Фиксировать первую деталь When inserting the first part in the assembly, it can be grounded automatically - When inserting the first part in the assembly, it can be grounded automatically + При вставке первой детали в сборку она может быть зафиксирована автоматически Esc leaves edit mode - Esc выйти из режима редактирования + Esc выходит из режима редактирования Log dragging steps - Шаги перетаскивания (Log) + Запись шагов перетаскивания в журнал AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Объект связан с одним или несколькими соединениями. - + Do you want to move the object and delete associated joints? Вы хотите переместить объект и удалить связанные соединения? - + Move part Переместить деталь + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Конфликтующие ограничения: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Частично избыточны: + + + + Solver failed to converge + Решатель не смог сместиться + + + + Under-constrained: + Недостаточно ограничен: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Полностью ограничен + Assembly_CreateJointScrew Screw Joint - Винтовое соединение + Резьбовое/Шнековое сопряжение Creates a screw joint that links a part with a sliding joint to a part with a revolute joint - Creates a screw joint that links a part with a sliding joint to a part with a revolute joint + Создаёт резьбовое/шнековое сопряжение, которое связывает деталь имеющую скользящее сопряжение с деталью имеющей поворотное сопряжение @@ -928,12 +984,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Gears/Belt Joint - Gears/Belt Joint + Шестерни/Ремни/Цепи Creates a gears or belt joint that links 2 rotating gears together - Creates a gears or belt joint that links 2 rotating gears together + Создаёт шестерёнчатое или ремённое соединение, которое соединяет две вращающиеся шестерни между собой @@ -946,32 +1002,32 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Exploded View - Exploded View + Разнесённый Вид If checked, parts will be selected as a single solid - If checked, parts will be selected as a single solid + Если этот флажок установлен, детали будут выбираться как единое целое Parts as single solid - Детали как одно тело + Детали как одно твёрдое тело Align Dragger - Align Dragger + Выравнивание Разнесения Select a feature to align. Press Esc to cancel. - Select a feature to align. Press Esc to cancel. + Выберите элемент для выравнивания. Нажмите Esc, чтобы отменить. Explode Radially - Explode Radially + Разнести Радиально @@ -981,32 +1037,32 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Parts children - Части детей + Дочерние части Деталей Bill of Materials - Спецификации материалов + Спецификация Includes children of sub-assemblies in the bill of materials - Includes children of sub-assemblies in the bill of materials + Включает дочерние элементы подсборок в спецификацию Include child parts in the bill of materials - Include child parts in the bill of materials + Включает дочерние части деталей в спецификацию Adds only part containers and sub-assemblies to the bill of materials. Solids (e.g. bodies, fasteners, primitives) are excluded. - Adds only part containers and sub-assemblies to the bill of materials. Solids (e.g. bodies, fasteners, primitives) are excluded. + Добавляет в спецификацию только детали контейнеры и сборочные узлы. Твёрдые тела (например, тела, крепёжные детали, примитивы) исключаются. Only parts - Только части + Только детали @@ -1016,7 +1072,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Add Column - Add Column + Добавить столбец @@ -1034,22 +1090,22 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Bill of Materials - Спецификации материалов + Спецификация Creates a bill of materials of the current assembly. If an assembly is active, it will be a BOM of this assembly. Else it will be a BOM of the whole document. - Creates a bill of materials of the current assembly. If an assembly is active, it will be a BOM of this assembly. Else it will be a BOM of the whole document. + Создаёт спецификацию для текущей сборки. Если сборка активна, то будет создана спецификация для этой сборки. В противном случае будет создана спецификация для всего документа. The BOM object is a document object that stores the settings of your BOM. It is also a spreadsheet object so you can easily visualize the BOM. If you do not need the BOM object to be saved as a document object, you can simply export and cancel the task. - The BOM object is a document object that stores the settings of your BOM. It is also a spreadsheet object so you can easily visualize the BOM. If you do not need the BOM object to be saved as a document object, you can simply export and cancel the task. + Объект спецификации (BOM) - это объект документа, в котором хранятся настройки вашей спецификации. Он также является объектом электронной таблицы, поэтому вы можете легко отобразить спецификацию. Если вам не нужно сохранять объект спецификации в качестве объекта документа, вы можете просто экспортировать его и отменить задачу. The columns 'Index', 'Name', 'File Name' and 'Quantity' are automatically generated on recompute. The 'Description' and custom columns are not overwritten. - Столбцы «Индекс», «Имя», «Имя файла» и «Количество» автоматически генерируются при пересчете. Столбцы «Описание» и пользовательские столбцы не перезаписываются. + Столбцы 'Индекс', 'Имя', 'Имя файла' и 'Количество' автоматически генерируются при пересчёте. Столбец 'Описание' и пользовательские столбцы не перезаписываются. @@ -1073,12 +1129,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the New Part - New Part + Новая Деталь Insert a new part into the active assembly. The new part's origin can be positioned in the assembly. - Вставить новую часть в активный монтаж. Источник новой части может находиться в монтаже. + Вставить новую деталь в активную сборку. Начало координат новой детали можно определить в сборке. @@ -1106,7 +1162,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Simulation Settings - Simulation Settings + Настройки Симулятора @@ -1117,7 +1173,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Start time of the simulation - Время начала моделирования + Время начала симуляции @@ -1128,7 +1184,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the End time of the simulation - Время окончания моделирования + Время окончания симуляции @@ -1139,23 +1195,23 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Time step - Time step + Период Global error tolerance - Global error tolerance + Допуск глобальной погрешности Animation Player - Animation Player + Проигрыватель Анимации Frames per second - Frames per second + Кадров в секунду @@ -1170,7 +1226,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Frame - Каркас + Кадр @@ -1195,7 +1251,7 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Play forward - Играть вперед + Воспроизвести вперёд @@ -1208,12 +1264,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the New Assembly - New Assembly + Новая Сборка Creates an assembly object in the current document, or in the current active assembly (if any). Limit of one root assembly per file. - Creates an assembly object in the current document, or in the current active assembly (if any). Limit of one root assembly per file. + Создаёт объект сборки в текущем документе или в текущей активной сборке (если таковая имеется). Ограничение: одна корневая сборка на файл. @@ -1222,17 +1278,17 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Activate Assembly - Activate Assembly + Активная Сборка Select an assembly to activate: - Select an assembly to activate: + Выберите сборку для активации: Sets an assembly as the active one for editing. - Sets an assembly as the active one for editing. + Устанавливает сборку в качестве активной для редактирования. @@ -1240,17 +1296,17 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Fixed Joint - Fixed Joint + Фиксированное сопряжение 1 - If an assembly is active : Creates a joint permanently locking two parts together, preventing any movement or rotation - 1 - If an assembly is active : Creates a joint permanently locking two parts together, preventing any movement or rotation + 1 - Если сборка активна: Создаёт сопряжение, постоянно фиксирующее две детали вместе, предотвращая любое взаимное движение или поворот 2 - If a part is active: Positions sub-parts by matching selected coordinate systems. The second part selected will move. - 2 - If a part is active: Positions sub-parts by matching selected coordinate systems. The second part selected will move. + 2 - Если деталь активна: Располагает подузлы, сопоставляя выбранные системы координат. Вторая выбранная деталь будет перемещена. @@ -1258,12 +1314,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Revolute Joint - Revolute Joint + Поворотное сопряжение Creates a revolute joint allowing rotation around a single axis between selected parts - Creates a revolute joint allowing rotation around a single axis between selected parts + Создаёт поворотное сопряжение, допускающее только вращение вокруг одной оси между выбранными деталями @@ -1271,12 +1327,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Cylindrical Joint - Цилиндрическое соединение + Цилиндрическое сопряжение Creates a cylindrical joint that allows rotation around and translation along a single axis between assembled parts - Creates a cylindrical joint that allows rotation around and translation along a single axis between assembled parts + Создаёт цилиндрическое сопряжение, которое допускает вращение вокруг одной оси и перемещение вдоль этой оси между соединёнными деталями @@ -1284,12 +1340,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Slider Joint - Слайдерное соединение + Скользящее сопряжение Creates a slider joint that allows linear movement along a single axis, but restricts rotation between selected parts - Creates a slider joint that allows linear movement along a single axis, but restricts rotation between selected parts + Создаёт скользящее сопряжение, которое допускает линейное перемещение вдоль одной оси, но ограничивает взаимное вращение выбранных деталей @@ -1297,12 +1353,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Ball Joint - Шаровое соединение + Шаровое сопряжение Creates a ball joint that connects parts at a point, allowing unrestricted movement as long as the connection points remain in contact - Creates a ball joint that connects parts at a point, allowing unrestricted movement as long as the connection points remain in contact + Создаёт шаровое сопряжение, которое соединяет детали в одной точке, допуская неограниченное взаимное движение, пока точки соединения остаются в контакте @@ -1310,17 +1366,17 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Distance Joint - Длина соединения + Дистанционное сопряжение Creates a distance joint that fixes the distance between the selected objects - Creates a distance joint that fixes the distance between the selected objects + Создаёт сопряжение на расстоянии/дистанции, которое фиксирует расстояние между выбранными объектами Creates one of several different joints based on the selectionFor example, a distance of 0 between a plane and a cylinder creates a tangent joint. A distance of 0 between planes will make them co-planar. - Creates one of several different joints based on the selectionFor example, a distance of 0 between a plane and a cylinder creates a tangent joint. A distance of 0 between planes will make them co-planar. + Создаёт одно из нескольких различных сопряжений в зависимости от выбора. Например, расстояние 0 между плоскостью и цилиндром создаёт касательное сопряжение. Расстояние 0 между плоскостями сделает их копланарными. @@ -1328,12 +1384,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Parallel Joint - Parallel Joint + Параллельное сопряжение Creates a parallel joint that makes the Z-axis of the selected coordinate systems parallel - Creates a parallel joint that makes the Z-axis of the selected coordinate systems parallel + Создаёт параллельное сопряжение, которое делает оси Z выбранных систем координат параллельными @@ -1341,12 +1397,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Perpendicular Joint - Перпендикулярное соединение + Перпендикулярное сопряжение Creates a perpendicular joint that makes the Z-axis of the selected coordinate systems perpendicular - Creates a perpendicular joint that makes the Z-axis of the selected coordinate systems perpendicular + Создаёт перпендикулярное сопряжение, которое делает оси Z выбранных систем координат взаимно перпендикулярными @@ -1354,12 +1410,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Angle Joint - Angle Joint + Угловое сопряжение Creates an angle joint that fixes the angle between the Z-axis of the selected coordinate systems - Creates an angle joint that fixes the angle between the Z-axis of the selected coordinate systems + Создаёт сопряжение под углом, которое фиксирует угол между осями Z выбранных систем координат @@ -1367,17 +1423,17 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Rack and Pinion Joint - Rack and Pinion Joint + Реечное сопряжение Creates a rack and pinion joint that links a part with a sliding joint to a part with a revolute joint - Creates a rack and pinion joint that links a part with a sliding joint to a part with a revolute joint + Создаёт реечное зубчатое сопряжение и сопряжение зацепления, которое связывает деталь имеющую скользящее соединение с деталью имеющей поворотное соединение Selects the same coordinate systems as the revolute and sliding joints. The pitch radius defines the movement ratio between the rack and the pinion. - Selects the same coordinate systems as the revolute and sliding joints. The pitch radius defines the movement ratio between the rack and the pinion. + Выбирайте те же системы координат, что и у соединений с поворотом и скольжением. Радиус шага определяет соотношение движения между рейкой и шестернёй. @@ -1385,12 +1441,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Gears Joint - Gears Joint + Шестерёнчатое сопряжение Creates a gears joint that links 2 rotating gears together. They will have inverse rotation direction. - Creates a gears joint that links 2 rotating gears together. They will have inverse rotation direction. + Создаёт сопряжение шестерён, которое связывает две вращающиеся шестерни. Они будут иметь взаимное противоположное направление вращения. @@ -1398,12 +1454,12 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Belt Joint - Ременное соединение + Ремённое/Цепное сопряжение Creates a belt joint that links 2 rotating objects together. They will have the same rotation direction. - Creates a belt joint that links 2 rotating objects together. They will have the same rotation direction. + Создаёт сопряжение с ремнём, которое связывает два вращающихся объекта. Они будут иметь одинаковое направление вращения. @@ -1411,14 +1467,13 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the Toggle Grounded - Toggle Grounded + Переключить глобальную фиксацию Toggles the grounding of a part. Grounding a part permanently locks its position in the assembly, preventing any movement or rotation. You need at least one grounded part before starting to assemble. - Toggles the grounding of a part. -Grounding a part permanently locks its position in the assembly, preventing any movement or rotation. You need at least one grounded part before starting to assemble. + Включает или выключает фиксацию детали. Фиксация детали блокирует её пространственное положение в сборке, предотвращая любое движение или поворот. Перед началом сборки необходимо зафиксировать хотя бы одну деталь. @@ -1431,7 +1486,7 @@ Grounding a part permanently locks its position in the assembly, preventing any Creates a new simulation of the current assembly - Creates a new simulation of the current assembly + Создаёт новую симуляцию текущей сборки @@ -1439,12 +1494,12 @@ Grounding a part permanently locks its position in the assembly, preventing any Exploded View - Exploded View + Разнесённый Вид Creates an exploded view of the current assembly - Creates an exploded view of the current assembly + Создаёт разнесённый (разборную схему) вид текущей сборки @@ -1452,7 +1507,35 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component - Вставить компонент + Вставить Компонент + + + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts index 048fbdc114..7589b1a95d 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sl.ts @@ -63,7 +63,7 @@ Assembly - + Active object Aktivni objekt @@ -884,20 +884,76 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Move part + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Over-constrained: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Delno čezmerno: + + + + Solver failed to converge + Reševalniku je zbliževanje spodletelo + + + + Under-constrained: + Under-constrained: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Polnoomejen + Assembly_CreateJointScrew @@ -1455,4 +1511,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Vstavi komponento + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr-CS.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr-CS.ts index 606ca03a6b..a6467533a0 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr-CS.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr-CS.ts @@ -63,7 +63,7 @@ Assembly - + Active object Aktivni objekat @@ -883,20 +883,75 @@ Datoteke se zovu „runPreDrag.asmt“ i „dragging.log“ i nalaze se u podraz AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Objektu su pridruženi jedan ili više spojeva. - + Do you want to move the object and delete associated joints? Da li želiš pomeriti objekat i obrisati pridružene spojeve? - + Move part Pomeri deo + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Previše ograničena: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Delimično suviše ograničena skica: + + + + Solver failed to converge + Solver nije uspeo da se približi + + + + Under-constrained: + Nedovoljno ograničena skica: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Potpuno ograničena skica + Assembly_CreateJointScrew @@ -1454,4 +1509,32 @@ Pravljenje dela nepokretnim trajno učvrsti poziciju dela u sklopu, sprečavajuc Umetni komponentu + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts index 357093f539..8278c7a866 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts @@ -63,7 +63,7 @@ Скупштина - + Active object Активни објекат @@ -883,20 +883,75 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Објекту су придружени један или више спојева. - + Do you want to move the object and delete associated joints? Да ли желиш померити објекат и обрисати придружене спојеве? - + Move part Помеи део + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Превише ограничена: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Делимично сувише ограничена скица: + + + + Solver failed to converge + Солвер није успео да се приближи + + + + Under-constrained: + Недовољно ограничена скица: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Потпуно ограничена скица + Assembly_CreateJointScrew @@ -1454,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Уметни компоненту + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.ts index 1fa7610372..c0ac3e872b 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sv-SE.ts @@ -63,7 +63,7 @@ Ihopsättning - + Active object Aktivt objekt @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Objektet är kopplat till en eller flera leder. - + Do you want to move the object and delete associated joints? Vill du flytta objektet och ta bort tillhörande leder? - + Move part Flytta del + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Överbelastad: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Delvis överflödig: + + + + Solver failed to converge + Lösaren lyckades inte konvergera + + + + Under-constrained: + Underbegränsad: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Fullständigt begränsad + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Infoga komponent + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.ts index 7daf5fc80a..4a07d0bd45 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_tr.ts @@ -63,7 +63,7 @@ Montaj - + Active object Active object @@ -884,20 +884,74 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. The object is associated to one or more joints. - + Do you want to move the object and delete associated joints? Do you want to move the object and delete associated joints? - + Move part Parçayı taşı + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Over-constrained: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Kısmen gereksiz: + + + + Solver failed to converge + Solver failed to converge + + + + Under-constrained: + Under-constrained: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Fully constrained + Assembly_CreateJointScrew @@ -1455,4 +1509,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Insert Component + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.ts index 4c3fe7ff41..72b43754b6 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_uk.ts @@ -63,7 +63,7 @@ Збірка - + Active object Активний об'єкт @@ -884,20 +884,76 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. Об'єкт пов'язаний з одним або декількома з'єднаннями. - + Do you want to move the object and delete associated joints? Ви хочете перемістити об'єкт і видалити пов'язані з ним з'єднання? - + Move part Перемістити деталь + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + Надлишково обмежено: + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + Частково надлишкові: + + + + Solver failed to converge + Рішення не сходиться + + + + Under-constrained: + Частково обмежений: + + + + %n Degrees of Freedom + + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + %n Degrees of Freedom + + + + + Fully constrained + Повністю обмежений + Assembly_CreateJointScrew @@ -1455,4 +1511,32 @@ Grounding a part permanently locks its position in the assembly, preventing any Вставити компонент + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.ts index bfde27a292..a395f7b01e 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-CN.ts @@ -63,7 +63,7 @@ 装配 - + Active object 活动对象 @@ -884,20 +884,73 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. 该对象与一个或多个配合有关联。 - + Do you want to move the object and delete associated joints? 您想要移动对象并删除关联的配合吗？ - + Move part 移动零件 + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + 过度约束： + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + 部分冗余： + + + + Solver failed to converge + 求解器未能收敛 + + + + Under-constrained: + 约束不足： + + + + %n Degrees of Freedom + + %n Degrees of Freedom + + + + + Fully constrained + 完全约束 + Assembly_CreateJointScrew @@ -1455,4 +1508,32 @@ Grounding a part permanently locks its position in the assembly, preventing any 插入零件 + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.ts index ff4199f3cf..51874ec49b 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_zh-TW.ts @@ -63,7 +63,7 @@ 程式集 - + Active object 作業中物件 @@ -884,20 +884,73 @@ The files are named "runPreDrag.asmt" and "dragging.log" and are located in the AssemblyGui::ViewProviderAssembly - + The object is associated to one or more joints. 該物件與一個或多個接頭相關聯. - + Do you want to move the object and delete associated joints? 您要移動物件並刪除關聯的接頭嗎? - + Move part 移動零件 + + + ViewProviderAssembly + and %1 more + ViewProviderAssembly + + + + Empty Assembly + Empty Assembly + + + + Over-constrained: + 過度拘束： + + + + Malformed joints: + Malformed joints: + + + + Redundant joints: + Redundant joints: + + + + Partially redundant: + 部份冗餘： + + + + Solver failed to converge + 求解器無法收斂 + + + + Under-constrained: + 拘束不足： + + + + %n Degrees of Freedom + + %n Degrees of Freedom + + + + + Fully constrained + 完全拘束 + Assembly_CreateJointScrew @@ -1455,4 +1508,32 @@ Grounding a part permanently locks its position in the assembly, preventing any 插入組件 + + AssemblyGui::TaskAssemblyMessages + + + Solver messages + Solver messages + + + + Click to select these conflicting joints. + Click to select these conflicting joints. + + + + Click to select these redundant joints. + Click to select these redundant joints. + + + + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + The assembly has unconstrained components giving rise to those Degrees Of Freedom. Click to select these unconstrained components. + + + + Click to select these malformed joints. + Click to select these malformed joints. + + diff --git a/src/Mod/BIM/Resources/translations/Arch.ts b/src/Mod/BIM/Resources/translations/Arch.ts index fe96da70fa..10b47e5c60 100644 --- a/src/Mod/BIM/Resources/translations/Arch.ts +++ b/src/Mod/BIM/Resources/translations/Arch.ts @@ -3692,72 +3692,67 @@ The default template is located at: Arch - Structure - - - - - + Beam - - + + Column - + StructuralSystem - + Create Structures From Selection - + Create Structural System - - + + Create Structure - + First point of the beam - + Base point of column - + Next point - + Structure options - + Category - + @@ -3767,7 +3762,7 @@ The default template is located at: - + Length @@ -3775,7 +3770,7 @@ The default template is located at: - + Width @@ -3784,157 +3779,157 @@ The default template is located at: - + Height - + Parameters of the structure - + Switch Length/Height - + Switch Length/Width - - + + This mesh is an invalid solid - + Facemaker returned an error - + Node Tools - + Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off - + Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object - + Error: The base shape could not be extruded along this tool object - + Reset Nodes - + Edit Nodes - + Extend Nodes - + Connect Nodes - + Toggle All Nodes - - + + Select Tool - + Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: - - + + The chosen object is not a Structure - - + + The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point - + Intersection found. - + Intersection found. - + Done @@ -3979,12 +3974,12 @@ The default template is located at: - + Profile - + Site @@ -4037,7 +4032,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Roof @@ -4108,7 +4103,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + External Reference @@ -4276,7 +4271,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Window @@ -4323,75 +4318,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - - + + Invert Opening Direction - - + + Invert Hinge Position - + This window has no defined opening - - + + Get selected edge - + Unable to create component - + Window elements - + Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected - + Create/Update Component - + Create new Component - + Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here @@ -4401,7 +4396,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove @@ -4410,7 +4405,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add @@ -4426,38 +4421,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit - + Base 2D object - - + + Wires - + Components - + Name - + Type @@ -4472,38 +4467,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset - + Hinge - + Opening mode - + + Frame property - + + Offset property - + Get Selected Edge - + Press to retrieve the selected edge @@ -4549,7 +4544,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Truss @@ -4604,17 +4599,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Project - + Stairs - + Railing @@ -4624,12 +4619,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' @@ -4941,7 +4936,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape @@ -5162,7 +5157,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Schedule @@ -5391,7 +5386,7 @@ Floor creation aborted. - + Rebar @@ -5407,7 +5402,7 @@ Floor creation aborted. - + Section @@ -5533,7 +5528,7 @@ Building creation aborted. - + Space @@ -5553,12 +5548,12 @@ Building creation aborted. - + Wall - + Walls can only be based on Part or Mesh objects @@ -5616,22 +5611,22 @@ Building creation aborted. - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall - + Flip Direction @@ -5848,12 +5843,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5861,12 +5856,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System - + Create a structural system from a selected structure and axis @@ -5874,12 +5869,12 @@ Building creation aborted. Arch_Structure - + Structure - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -5887,146 +5882,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element - + The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element - + A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not - + The width of the nodes line - + The size of the node points - + The color of the nodes line - + The type of structural node - + Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes @@ -6326,6 +6321,42 @@ Building creation aborted. Thickness of the legs + + + side size + + + + + Slot size + + + + + Thickness of the wall + + + + + t-nut slot width + + + + + t-nut slot depth + + + + + + Internal core size + + + + + fillet radius + + The base terrain of this site @@ -6763,7 +6794,7 @@ Building creation aborted. - + The number of the wire that defines the hole. A value of 0 means automatic @@ -7020,7 +7051,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads @@ -8158,7 +8189,7 @@ Building creation aborted. - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8167,12 +8198,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools - + Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_be.qm b/src/Mod/BIM/Resources/translations/Arch_be.qm index 7a4feb5fd5..e7dde33050 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_be.qm and b/src/Mod/BIM/Resources/translations/Arch_be.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_be.ts b/src/Mod/BIM/Resources/translations/Arch_be.ts index 15ce3370ac..29d067fc4d 100644 --- a/src/Mod/BIM/Resources/translations/Arch_be.ts +++ b/src/Mod/BIM/Resources/translations/Arch_be.ts @@ -762,7 +762,7 @@ of that project, no matter if they are expanded or not. Toggle Visibility - Toggle Visibility + Пераключыць бачнасць @@ -3786,72 +3786,67 @@ The default template is located at: Arch - Structure - Канструкцыя - - - - + Beam Бэлька - - + + Column Слупок - + StructuralSystem Канструкцыйная сістэма - + Create Structures From Selection Стварыць канструкцыю з абранага - + Create Structural System Стварыць канструкцыйную сістэму - - + + Create Structure Стварыць канструкцыю - + First point of the beam Пачатковая кропка на бэльцы - + Base point of column Асноўная кропка слупка - + Next point Наступная кропка - + Structure options Налады канструкцыі - + Category Катэгорыя - + @@ -3861,7 +3856,7 @@ The default template is located at: - + Length @@ -3869,7 +3864,7 @@ The default template is located at: - + Width @@ -3878,158 +3873,158 @@ The default template is located at: - + Height Вышыня - + Parameters of the structure Налады канструкцыі - + Switch Length/Height Пераключыць даўжыню/вышыню - + Switch Length/Width Пераключыць даўжыню/шырыню - - + + This mesh is an invalid solid Паліганальная сетка з'яўляецца хібным суцэльным целам - + Facemaker returned an error Майстар граняў вярнуў памылку - + Node Tools Інструмент для вузлоў - + Extends the nodes of this element to reach the nodes of another element Пашырае вузлы элемента, каб дасягнуць вузлоў іншага элемента - + Connects nodes of this element with the nodes of another element Злучае вузлы элемента з вузламі іншага элемента - + Toggles all structural nodes of the document on/off Пераключае ўсе канструкцыйныя вузлы дакумента - + Extrusion Tools Інструменты выдушвання - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Абраць іншы аб'ект канструкцыі: - - + + The chosen object is not a Structure Абраны аб'ект не з'яўляецца канструкцыяй - - + + The chosen object has no structural nodes Абраны аб'ект не мае канструкцыйных вузлоў - - + + One of these objects has more than 2 nodes Адзін з аб'ектаў мае больш за два вузла - - + + Unable to find a suitable intersection point Немагчыма знайсці прыдатную кропку скрыжавання - + Intersection found. Перасячэнне знойдзена. - + Intersection found. Перасячэнне знойдзена. - + Done Зроблена @@ -4074,12 +4069,12 @@ The default template is located at: Стварыць профіль - + Profile Профіль - + Site Мясцовасць @@ -4142,7 +4137,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Калі ласка, абярыце асноўны аб'ект - + Roof Дах @@ -4213,7 +4208,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Спераду - + External Reference Вонкавы спасылак @@ -4383,7 +4378,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Бібліятэку shapefile можна спампаваць па наступным URL-адрасе і ўсталяваць у каталог макрасаў: - + Window Акно @@ -4430,75 +4425,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Вышыня падаконніку - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Акно не мае пэўнага спосабу адкрыцця - - + + Get selected edge Атрымаць абранае рабро - + Unable to create component Немагчыма стварыць кампанент - + Window elements Элементы акна - + Hole wire Ломаная лінія адтуліны - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Колькасць ломаных ліній, які вызначае адтуліны ў аб'екце вузла. Калі 0, аўтаматычна прыме самую вялікую ломаную лінію - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4508,7 +4503,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Выдаліць @@ -4517,7 +4512,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Дадаць @@ -4533,38 +4528,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Змяніць - + Base 2D object Асноўны двухмерны аб'ект - - + + Wires Ломаныя лініі - + Components Кампаненты - + Name Назва - + Type Тып @@ -4579,38 +4574,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Зрушэнне - + Hinge Шарнір - + Opening mode Рэжым адкрыцця - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Націсніце, каб атрымаць абранае рабро @@ -4656,7 +4651,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Паспяхова запісана - + Truss Канструкцыя ферма @@ -4711,17 +4706,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Праект - + Stairs Лесвіца - + Railing Парэнчы @@ -4731,12 +4726,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Стварыць лесвіцу - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' выдалены ўласцівасці 'OutlineWireLeft' і 'OutlineWireRight', і дададзены ўласцівасці 'RailingLeft' і 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' зменены тып уласцівасцяў 'RailingLeft' і 'RailingRight' @@ -5048,7 +5043,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5269,7 +5264,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Адзінка вымярэння - + Schedule Наменклатура @@ -5510,7 +5505,7 @@ Floor creation aborted. Новы набор уласцівасцяў - + Rebar Арматура @@ -5526,7 +5521,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Перасек @@ -5660,7 +5655,7 @@ Building creation aborted. Стварыць Будынак - + Space Памяшканне @@ -5680,12 +5675,12 @@ Building creation aborted. Межы памяшкання - + Wall Сцяна - + Walls can only be based on Part or Mesh objects Сцены могуць быць заснаваныя толькі на аб'ектах Дэталь ці Паліганальная сетка @@ -5743,22 +5738,22 @@ Building creation aborted. Аб'яднаць сцены - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction зменена значэнне 'Normal' на [0, 0, 1], каб захаваць напрамак выдушвання - + Cannot compute blocks for wall Не атрымалася вылічыць блокі для сцен - + Error: Unable to modify the base object of this wall Памылка: немагчыма змяніць асноўны аб'ект сцяны - + Flip Direction Flip Direction @@ -5975,12 +5970,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Некалькі канструкцый - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5988,12 +5983,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Канструкцыйная сістэма - + Create a structural system from a selected structure and axis Стварае канструкцыйную сістэму на падставе абранай канструкцыі і восей @@ -6001,12 +5996,12 @@ Building creation aborted. Arch_Structure - + Structure Канструкцыя - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Стварае канструкцыю з нуля ці з абранага аб'екта (эскіз, ломаная лінія, грань ці суцэльнае цела) @@ -6014,146 +6009,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element Неабавязковы траекторыя выдушвання для элемента - + The computed length of the extrusion path Вылічаная даўжыня траекторыі выдушвання - + Start offset distance along the extrusion path (positive: extend, negative: trim) Пачатковая адлегласць зрушэння наўздоўж траекторыі выдушвання (станоўчае: выцягнуць, адмоўнае: абрэзаць) - + End offset distance along the extrusion path (positive: extend, negative: trim) Канцавая адлегласць зрушэння наўздоўж траекторыі выдушвання (станоўчае: выцягнуць, адмоўнае: абрэзаць) - + Automatically align the Base of the Structure perpendicular to the Tool axis Аўтаматычна выраўноўвае аснову канструкцыі перпендыкулярна восі інструмента - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Зрушэнне па восі X паміж асноўнай кропкай пачатку каардынат і воссю інструмента (ужываецца толькі ў тым выпадку, калі BasePerpendicularToTool зададзены ў True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Зрушэнне па восі Y паміж асноўнай кропкай пачатку каардынат і воссю інструмента (ужываецца толькі ў тым выпадку, калі BasePerpendicularToTool зададзены ў True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Сіметрычнае адлюстраванне асновы наўздоўж восі Y (ужываецца толькі ў тым выпадку, калі BasePerpendicularToTool зададзены ў True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Кручэнне асновы вакол восі інструмента (ужываецца толькі ў тым выпадку, калі BasePerpendicularToTool зададзены ў True) - + The length of this element, if not based on a profile Даўжыня элементу, калі не заснаваны на профілі - + The width of this element, if not based on a profile Шырыня элементу, калі не заснаваны на профілі - + The height or extrusion depth of this element. Keep 0 for automatic Вышыня ці глыбіня выдушвання элементу. Задайце 0 для аўтаматычнага вызначэння - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Вектар нармалі напрамку выдушвання аб'екту (пакіньце (0,0,0) для аўтаматычнага вектару нармалі) - + The structural nodes of this element Структурныя вузлы элемента - + A description of the standard profile this element is based upon Апісанне стандартнага профілю, на якім заснаваны элемент - + Offset distance between the centerline and the nodes line Адлегласць зрушэння паміж цэнтральнай ліній і лініяй вузлоў - + The facemaker type to use to build the profile of this object Тып майстра граняў, які ўжываецца для стварэння профілю аб'екта - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Абраныя рэбры (ці суполка рэбраў) асноўнага Эскізу архітэктуры для ўжывання пры стварэнні фігуры канструкцыі BIM (замест першапачатковага ўжывання ўсіх рэбраў асноўнай фігуры). Ўваходныя дадзеныя - гэта індэксныя нумары рэбраў ці суполак. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Абраць карыстальніцкі набор уласцівасцяў, які будзе ўжывацца пры стварэнні альтэрнатыўнай фігуры з тым жа Эскізам архітэктуры - + If the nodes are visible or not Бачныя вузлы, ці не - + The width of the nodes line Шырыня ліній вузлоў - + The size of the node points Памер кропак вузла - + The color of the nodes line Колер лініі вузлоў - + The type of structural node Тып канструкцыйнага вузла - + Axes systems this structure is built on Сістэмы восей, на якіх пабудавана канструкцыя - + The element numbers to exclude when this structure is based on axes Нумары элементаў, якія варта выключыць, калі канструкцыя заснаваная на восях - + If true the element are aligned with axes Калі птушка, элемент выраўнаваны па восях @@ -6453,6 +6448,42 @@ Building creation aborted. Thickness of the legs Таўшчыня апор + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6891,7 +6922,7 @@ Building creation aborted. Паказвае знакі адкрыцця вышыні, калі яны маюцца - + The number of the wire that defines the hole. A value of 0 means automatic Колькасць ломаных ліній, якая вызначае адтуліну. Значэнне 0 азначае - аўтаматычна @@ -7148,7 +7179,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads Перакрыцце косаураў над ніжняй часткай проступей @@ -8315,7 +8346,7 @@ Building creation aborted. Абраць карыстальніцкі набор уласцівасцяў, які будзе ўжывацца пры стварэнні альтэрнатыўнай фігуры, пластоў сцяны архітэктуры з тым жа Эскізам архітэктуры - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Ужываць асноўныя дадзеныя ArchSketch (калі яны ўжыаюцца) (напрыклад, шырыню, выраўноўванне, зрушэнне) замест уласцівасцяў сцены @@ -8324,12 +8355,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Інструменты канструкцыі @@ -10141,7 +10172,7 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet Toggle Visibility - Toggle Visibility + Пераключыць бачнасць diff --git a/src/Mod/BIM/Resources/translations/Arch_ca.qm b/src/Mod/BIM/Resources/translations/Arch_ca.qm index 1620dcd423..a57cfc003e 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ca.qm and b/src/Mod/BIM/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ca.ts b/src/Mod/BIM/Resources/translations/Arch_ca.ts index 945dc83361..0fa827197f 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ca.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ca.ts @@ -3757,72 +3757,67 @@ The default template is located at: Arch - Structure - Estructura - - - - + Beam Biga - - + + Column Columna - + StructuralSystem Sistema estructural - + Create Structures From Selection Crea estructures a partir de la selecció - + Create Structural System Crea un sistema estructural - - + + Create Structure Crea una estructura - + First point of the beam Primer punt de la biga - + Base point of column Punt d'origen de la columna - + Next point Punt següent - + Structure options Opcions de l'estructura - + Category Categoria - + @@ -3832,7 +3827,7 @@ The default template is located at: - + Length @@ -3840,7 +3835,7 @@ The default template is located at: - + Width @@ -3849,158 +3844,158 @@ The default template is located at: - + Height Alçària - + Parameters of the structure Paràmetres de l'estructura - + Switch Length/Height Intercanviar Longitud/Alçada - + Switch Length/Width Intercanviar Longitud/Amplada - - + + This mesh is an invalid solid Aquesta malla no és un sòlid vàlid - + Facemaker returned an error El generador de cares ha retornat un error - + Node Tools Eines de Node - + Extends the nodes of this element to reach the nodes of another element Estén els nodes d'aquest element per a arribar als nodes d'un altre element - + Connects nodes of this element with the nodes of another element Connecta els nodes d'aquest element amb els nodes d'un altre element - + Toggles all structural nodes of the document on/off Activa/desactiva tots els nodes estructurals en el document - + Extrusion Tools Eines d'extrusió - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Tria un altre objecte d'estructura: - - + + The chosen object is not a Structure L'objecte triat no és una Estructura - - + + The chosen object has no structural nodes L'objecte triat no té nodes estructurals - - + + One of these objects has more than 2 nodes Un d'aquests objectes té més de 2 nodes - - + + Unable to find a suitable intersection point No s'ha pogut trobar un punt d'intersecció adequat - + Intersection found. S'ha trobat una intersecció. - + Intersection found. Intersecció trobada. - + Done Fet @@ -4045,12 +4040,12 @@ The default template is located at: Crea un perfil - + Profile Perfil - + Site Lloc @@ -4113,7 +4108,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Seleccioneu un objecte base - + Roof Sostre @@ -4184,7 +4179,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Alçat - + External Reference Referència externa @@ -4352,7 +4347,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela La biblioteca de Shapefile es pot descarregar a la següent URL i instal·lar a la teva carpeta de macros: - + Window Finestra @@ -4399,75 +4394,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Alçada de suport - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Aquesta finestra no té obertura definida - - + + Get selected edge Obtingui la vora seleccionada - + Unable to create component No s'ha pogut crear el component - + Window elements Elements de finestra - + Hole wire Nombre de fils - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El nombre de fils que defineixen un forat en l'objecte amfitrió. Un valor de zero automàticament adoptarà el fil més gran - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4477,7 +4472,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Elimina @@ -4486,7 +4481,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Afegeix @@ -4502,38 +4497,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Edita - + Base 2D object Objecte base 2D - - + + Wires Filferros - + Components Components - + Name Nom - + Type Tipus @@ -4548,38 +4543,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Equidistància - + Hinge Frontissa - + Opening mode Mode d'obertura - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Premeu-ho per a recuperar la vora seleccionada @@ -4625,7 +4620,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela S'ha escrit correctament - + Truss Gelosia @@ -4680,17 +4675,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projecte - + Stairs Escales - + Railing Barana @@ -4700,12 +4695,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Crea unes escales - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' s'han eliminat les propietats 'OutlineWireLeft' i 'OutlineWireRight', i s'han afegit les propietats 'RailingLeft' i 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' s'ha canviat el tipus de les propietats 'RailingLeft' i 'RailingRight' @@ -5017,7 +5012,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5238,7 +5233,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unitat - + Schedule Guió @@ -5479,7 +5474,7 @@ S'interromp la creació de la planta. Conjunt de propietats nou - + Rebar Rebar @@ -5495,7 +5490,7 @@ S'interromp la creació de la planta. Select a base face on a structural object - + Section Secció @@ -5629,7 +5624,7 @@ S'avorta la creació de la construcció. Crea una construcció - + Space Espai @@ -5649,12 +5644,12 @@ S'avorta la creació de la construcció. Límits de l'espai - + Wall Mur - + Walls can only be based on Part or Mesh objects Els murs només es poden crear a partir d'objectes Peça o Malla @@ -5712,22 +5707,22 @@ S'avorta la creació de la construcció. Fusiona els murs - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction s'ha canviat 'Normal' a [0, 0, 1] per a conservar la direcció d'extrusió - + Cannot compute blocks for wall No es poden calcular els blocs pel mur - + Error: Unable to modify the base object of this wall Error: No es pot modificar l'objecte base d'aquest mur - + Flip Direction Flip Direction @@ -5944,12 +5939,12 @@ S'avorta la creació de la construcció. Arch_StructuresFromSelection - + Multiple Structures Estructures múltiples - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5957,12 +5952,12 @@ S'avorta la creació de la construcció. Arch_StructuralSystem - + Structural System Sistema estructural - + Create a structural system from a selected structure and axis Crea un sistema estructural a partir d'una estructura i un eix seleccionats @@ -5970,12 +5965,12 @@ S'avorta la creació de la construcció. Arch_Structure - + Structure Estructura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Crea una estructura des de zero o d'un objecte seleccionat (croquis, filferro, cara o sòlid) @@ -5983,146 +5978,146 @@ S'avorta la creació de la construcció. App::Property - - + + An optional extrusion path for this element Un camí d'extrusió opcional per a aquest element - + The computed length of the extrusion path La longitud calculada del camí d'extrusió - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distància de l'equidistància inicial al llarg del camí d'extrusió (positiva: allarga, negativa: escurça) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distància de l'equidistància final al llarg del camí d'extrusió (positiva: allarga, negativa: escurça) - + Automatically align the Base of the Structure perpendicular to the Tool axis Alinea automàticament la base de l'estructura perpendicularment a l'eix d'eines - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Equidistància X entre l'origen de Base i l'eix d'eines (només es fa servir si BasePerpendicularToTool és Cert) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Equidistància Y entre l'origen de Base i l'eix d'eines (només es fa servir si BasePerpendicularToTool és Cert) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Emmiralla la base al llarg del seu eix Y (només s'utilitza si BasePerpendicularToTool és Cert) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotació de Base al llarg de l'eix de l'Eina (només es fa servir si BasePerpendicularToTool és Cert) - + The length of this element, if not based on a profile La longitud d'aquest element, si no està basat en el perfil - + The width of this element, if not based on a profile L'amplada d'aquest element, si no està basat en el perfil - + The height or extrusion depth of this element. Keep 0 for automatic L'alçada o profunditat d'extrusió d'aquest element. Mantingui 0 per a automàtica - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direcció d'extrusió normal d'aquest objecte (mantingui (0,0,0) per a automàtica) - + The structural nodes of this element Els nodes estructurals d'aquest element - + A description of the standard profile this element is based upon Una descripció del perfil estàndard en què es basa aquest element - + Offset distance between the centerline and the nodes line Distància de separació entre la línia central i la línia de nodes - + The facemaker type to use to build the profile of this object El tipus de generador de cares que s'ha d'utilitzar per a construir el perfil d'aquest objecte - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Vores seleccionades (o grup de vores) de l'ArchSketch base, utilitzades per crear la forma d'aquesta estructura BIM (en lloc d'utilitzar totes les vores de la forma base de manera predeterminada). L'entrada és el nombre de vores o grups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Seleccioneu el conjunt de propietats definit per l'usuari per utilitzar-lo en la creació de formes variants, amb el mateix ArchSketch. - + If the nodes are visible or not Si els nodes són visibles o no - + The width of the nodes line L'amplada de la línia de nodes - + The size of the node points La mida dels punts de node - + The color of the nodes line El color de la línia de nodes - + The type of structural node El tipus de node estructural - + Axes systems this structure is built on Sistema d'eixos sobre el qual està construïda aquesta estructura - + The element numbers to exclude when this structure is based on axes El nombre d'elements que s'han d'excloure quan l'estructura es basa en eixos - + If true the element are aligned with axes Si s'estableix a cert, l'element s'alinea amb els eixos @@ -6422,6 +6417,42 @@ S'avorta la creació de la construcció. Thickness of the legs Gruix dels suports + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6859,7 +6890,7 @@ S'avorta la creació de la construcció. Mostra els símbols d'obertura de l'elevació, si està disponible - + The number of the wire that defines the hole. A value of 0 means automatic El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic @@ -7116,7 +7147,7 @@ S'avorta la creació de la construcció. - + The overlap of the stringers above the bottom of the treads La superposició dels travessers d'escala sobre la part inferior de les esteses @@ -8254,7 +8285,7 @@ S'avorta la creació de la construcció. Seleccioneu el conjunt de propietats definit per l'usuari per utilitzar-lo en la creació de formes variants, amb el mateix ArchSketch. - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Utilitzeu dades de Base ArchSketch (si s'utilitza) (p. ex., amplades, alineacions, desplaçaments) en lloc de les propietats de mur @@ -8263,12 +8294,12 @@ S'avorta la creació de la construcció. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Eines d'estructura diff --git a/src/Mod/BIM/Resources/translations/Arch_cs.qm b/src/Mod/BIM/Resources/translations/Arch_cs.qm index 188c1392ed..413efde06c 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_cs.qm and b/src/Mod/BIM/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_cs.ts b/src/Mod/BIM/Resources/translations/Arch_cs.ts index 46faf5ea6c..8c3a44f15f 100644 --- a/src/Mod/BIM/Resources/translations/Arch_cs.ts +++ b/src/Mod/BIM/Resources/translations/Arch_cs.ts @@ -3772,72 +3772,67 @@ The default template is located at: Arch - Structure - Struktura - - - - + Beam Nosník - - + + Column Sloupec - + StructuralSystem StrukturalSystém - + Create Structures From Selection Vytvořit struktury z výběru - + Create Structural System Vytvořit strukturální systém - - + + Create Structure Vytvořit strukturu - + First point of the beam První bod světla - + Base point of column Základní bod sloupce - + Next point Další bod - + Structure options Možnosti struktury - + Category Kategorie - + @@ -3847,7 +3842,7 @@ The default template is located at: - + Length @@ -3855,7 +3850,7 @@ The default template is located at: - + Width @@ -3864,158 +3859,158 @@ The default template is located at: - + Height Výška - + Parameters of the structure Parametry struktury - + Switch Length/Height Přepnout Délka/Výška - + Switch Length/Width Přepnout Délka/Šířka - - + + This mesh is an invalid solid Tato síť netvoří platné těleso - + Facemaker returned an error Fakulta vrátila chybu - + Node Tools Nástroje uzlu - + Extends the nodes of this element to reach the nodes of another element Rozšíří uzly tohoto prvku tak, aby se dostaly do uzlů jiného prvku - + Connects nodes of this element with the nodes of another element Spojuje uzly tohoto prvku s uzly jiného prvku - + Toggles all structural nodes of the document on/off Zapnout/vypnout všechny strukturální uzly dokumentu - + Extrusion Tools Nástroje pro extruzi - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Vyberte jiný objekt struktury: - - + + The chosen object is not a Structure Zvolený objekt není struktura - - + + The chosen object has no structural nodes Zvolený objekt nemá žádné strukturální uzly - - + + One of these objects has more than 2 nodes Jeden z těchto objektů má více než 2 uzly - - + + Unable to find a suitable intersection point Nelze najít vhodný průsečík - + Intersection found. Křížová sekce nalezena. - + Intersection found. Průsečík nalezen. - + Done Hotovo @@ -4060,12 +4055,12 @@ The default template is located at: Vytvořit profil - + Profile Profil - + Site Parcela @@ -4128,7 +4123,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Vyber základní objekt - + Roof Střecha @@ -4199,7 +4194,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Přední - + External Reference Externí odkaz @@ -4367,7 +4362,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Knihovnu shapefile lze stáhnout z následující adresy URL a nainstalovat do složky maker: - + Window Okno @@ -4414,75 +4409,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Výška parapetu - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Toto okno nemá žádné definované otevření - - + + Get selected edge Získat vybranou hranu - + Unable to create component Nepodařilo se vytvořit komponentu - + Window elements Prvky okna - + Hole wire Křivka otvoru - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Číslo křivky, která definuje otvor v hostitelském objektu. Nulová hodnota automaticky převezme největší křivku - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4492,7 +4487,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Odstranit @@ -4501,7 +4496,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Přidat @@ -4517,38 +4512,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Upravit - + Base 2D object Základní 2D objekt - - + + Wires Křivky - + Components Komponenty - + Name Název - + Type Typ @@ -4563,38 +4558,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Odsazení - + Hinge Závěs - + Opening mode Režim otevírání - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Stisknutím načíst vybraný okraj @@ -4640,7 +4635,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Úspěšně zapsáno - + Truss Vazník @@ -4695,17 +4690,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Schodiště - + Railing Zábradlí @@ -4715,12 +4710,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Vytvořit schody - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' odstraněny vlastnosti 'OutlineWireLeft' a 'OutlineWireright' a přidány vlastnosti 'RailingLeft' a 'Railingright' - + changed the type of properties 'RailingLeft' and 'RailingRight' změnil typ vlastností 'RailingLeft' a 'RailingRight @@ -5032,7 +5027,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5253,7 +5248,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Jednotka - + Schedule Plán @@ -5494,7 +5489,7 @@ Tvorba patra zrušena. Nová sada vlastností - + Rebar Výztuž @@ -5510,7 +5505,7 @@ Tvorba patra zrušena. Select a base face on a structural object - + Section Řez @@ -5644,7 +5639,7 @@ Tvorba stavby byla zrušena. Vytvořit budovu - + Space Prostor @@ -5664,12 +5659,12 @@ Tvorba stavby byla zrušena. Hranice prostoru - + Wall Stěna - + Walls can only be based on Part or Mesh objects Stěny mohou být založeny jen na objektech Dílu nebo Sítě @@ -5727,22 +5722,22 @@ Tvorba stavby byla zrušena. Sloučit stěny - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction 'Normála' změněna na [0, 0, 1] pro zachování směru vytažení - + Cannot compute blocks for wall Nelze vypočítat bloky pro stěnu - + Error: Unable to modify the base object of this wall Chyba: Nelze změnit základní objekt této stěny - + Flip Direction Flip Direction @@ -5959,12 +5954,12 @@ Tvorba stavby byla zrušena. Arch_StructuresFromSelection - + Multiple Structures Násobné konstrukce - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5972,12 +5967,12 @@ Tvorba stavby byla zrušena. Arch_StructuralSystem - + Structural System Konstrukční systém - + Create a structural system from a selected structure and axis Vytvořit konstrukční systém z vybrané konstrukce a osy @@ -5985,12 +5980,12 @@ Tvorba stavby byla zrušena. Arch_Structure - + Structure Struktura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Vytvořit strukturu od základu nebo z vybraného objektu (náčrt, křivka, plocha nebo těleso) @@ -5998,146 +5993,146 @@ Tvorba stavby byla zrušena. App::Property - - + + An optional extrusion path for this element Volitelná dráha vytažení pro tento prvek - + The computed length of the extrusion path Vypočtená délka dráhy vysunutí - + Start offset distance along the extrusion path (positive: extend, negative: trim) Odsazení počátku, podél dráhy vytažení (kladné: prodloužení, záporné: zkrácení) - + End offset distance along the extrusion path (positive: extend, negative: trim) Odsazení konce, podél dráhy vytažení (kladné: prodloužení, záporné: zkrácení) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automaticky zarovnat základnu konstrukce kolmo k ose nástroje - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X ofset mezi počátkem základny a osou nástroje (pouze, je-li zaškrtnuto BasePerpendicularToTool) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y ofset mezi počátkem základny a osou nástroje (pouze, je-li zaškrtnuto BasePerpendicularToTool) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Zrcadlit základnu podél její Y osy (pouze, je-li zaškrtnuto BasePerpendicularToTool) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotace základny kolem osy nástroje (pouze, je-li zaškrtnuto BasePerpendicularToTool) - + The length of this element, if not based on a profile Délka tohoto prvku, není-li založen na profilu - + The width of this element, if not based on a profile Šířka tohoto prvku, není-li založen na profilu - + The height or extrusion depth of this element. Keep 0 for automatic Výška či hloubka vytažení tohoto prvku. Ponechte 0 pro automatickou - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normálový směr vytažení tohoto objektu (pro (0,0,0) -> automatická normála) - + The structural nodes of this element Konstrukční uzly tohoto prvku - + A description of the standard profile this element is based upon Popis standardního profilu, na kterém je tento prvek založen - + Offset distance between the centerline and the nodes line Ofset mezi středovou osou a přímkou uzlů - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Vybrané hrany (nebo skupina hran) základového ArchSketch, použité pro vytvoření tvaru této BIM struktury (namísto výchozího použití všech hran základního tvaru). Vstupní údaje jsou indexy hran či skupin. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Jsou-li uzly viditelné, či nejsou - + The width of the nodes line Šířka čáry uzlů - + The size of the node points Velikost bodů uzlu - + The color of the nodes line Barva čáry uzlů - + The type of structural node Typ konstrukčního uzlu - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes Je-li "true", prvek je zarovnán s osami @@ -6437,6 +6432,42 @@ Tvorba stavby byla zrušena. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6874,7 +6905,7 @@ Tvorba stavby byla zrušena. Zobrazit symboly stoupání, jsou-li k dispozici - + The number of the wire that defines the hole. A value of 0 means automatic Číslo křivky, definující otvor. Hodnota 0 znamená automatický výpočet @@ -7131,7 +7162,7 @@ Tvorba stavby byla zrušena. - + The overlap of the stringers above the bottom of the treads Přesah schodnic nad spodní část nášlapů @@ -8269,7 +8300,7 @@ Tvorba stavby byla zrušena. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8278,12 +8309,12 @@ Tvorba stavby byla zrušena. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Nástroje struktury diff --git a/src/Mod/BIM/Resources/translations/Arch_de.qm b/src/Mod/BIM/Resources/translations/Arch_de.qm index 7116a1c5f1..bcda7062ce 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_de.qm and b/src/Mod/BIM/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_de.ts b/src/Mod/BIM/Resources/translations/Arch_de.ts index 125aa8ca02..18459f55ee 100644 --- a/src/Mod/BIM/Resources/translations/Arch_de.ts +++ b/src/Mod/BIM/Resources/translations/Arch_de.ts @@ -233,7 +233,7 @@ When dealing with native IFC objects, you can use FreeCAD properties name, ex: ' Add Row - Add Row + Zeile hinzufügen @@ -627,7 +627,7 @@ des Projekts zu erhalten egal, ob sie erweitert werden oder nicht. IFC Import Options - IFC Import Options + IFC-Importoptionen @@ -1999,7 +1999,7 @@ des Projekts zu erhalten egal, ob sie erweitert werden oder nicht. IFC Export - IFC Export + IFC-Export @@ -2237,7 +2237,7 @@ p, li { white-space: pre-wrap; } This screen lists all the windows of the current document. They can modified individually or together - This screen lists all the windows of the current document. They can modified individually or together + Dieser Bildschirm listet alle Fenster des aktuellen Dokuments auf. Sie können einzeln oder gemeinsam angepasst werden @@ -2404,7 +2404,7 @@ p, li { white-space: pre-wrap; } New Document - New Document + Neues Dokument @@ -2905,7 +2905,7 @@ a footprint display mode DEBUG: keep the construction geometries in the active document. Useful when debugging a failed import - DEBUG: keep the construction geometries in the active document. Useful when debugging a failed import + DEBUG: Behält die Hilfsgeometrien im aktiven Dokument. Nützlich für die Fehlersuche bei einem fehlgeschlagenen Import @@ -3135,7 +3135,7 @@ Ein Objekt ist das Bezugsobjekt, die restlichen sind Klone. IFC Import - IFC Import + IFC-Import @@ -3166,12 +3166,12 @@ if crashes occur when multiple cores are set. Do not import BIM objects - Do not import BIM objects + BIM-Objekte nicht importieren Import structure IFC objects as - Import structure IFC objects as + IFC-Strukturobjekte importieren als @@ -3373,7 +3373,7 @@ Wenn Netgen verwendet wird, sicherstellen, dass es verfügbar ist. Export Options - Export Options + Exportoptionen @@ -3598,7 +3598,7 @@ Warning: The IFC standard asks for at least one building in each file. By turnin IFC Export - IFC Export + IFC-Export @@ -3755,72 +3755,67 @@ The default template is located at: Arch - Structure - Struktur - - - - + Beam Balken - - + + Column Stütze - + StructuralSystem StrukturiertesSystem - + Create Structures From Selection Strukturen aus Auswahl erstellen - + Create Structural System Konstruktive Elemente erstellen - - + + Create Structure Struktur erzeugen - + First point of the beam Erster Punkt des Balkens - + Base point of column Basispunkt der Stütze - + Next point Nächster Punkt - + Structure options Strukturoptionen - + Category Kategorie - + @@ -3830,7 +3825,7 @@ The default template is located at: - + Length @@ -3838,7 +3833,7 @@ The default template is located at: - + Width @@ -3847,158 +3842,158 @@ The default template is located at: - + Height Höhe - + Parameters of the structure Parameter der Struktur - + Switch Length/Height Länge und Höhe tauschen - + Switch Length/Width Länge und Breite tauschen - - + + This mesh is an invalid solid Dieses Polygonnetz ist ein ungültiger Volumenkörper - + Facemaker returned an error Facemaker wurde mit Fehler beendet - + Node Tools Knotenwerkzeuge - + Extends the nodes of this element to reach the nodes of another element Verlängert die Knoten dieses Elements, um die Knoten eines anderen Elements zu erreichen - + Connects nodes of this element with the nodes of another element Verbindet die Knoten von diesem Element mit denen von einem anderen Element - + Toggles all structural nodes of the document on/off Schaltet alle Strukturknoten des Dokuments ein / aus - + Extrusion Tools Extrusionswerkzeuge - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Ein anderes Strukturobjekt auswählen: - - + + The chosen object is not a Structure Das ausgewählte Objekt ist keine Struktur - - + + The chosen object has no structural nodes Das ausgewählte Objekt hat keine Strukturknoten - - + + One of these objects has more than 2 nodes Eines dieser Objekte hat mehr als 2 Knoten - - + + Unable to find a suitable intersection point Es konnte kein geeigneter Schnittpunkt gefunden werden - + Intersection found. Schnittpunkt gefunden. - + Intersection found. Schnittpunkt gefunden. - + Done Fertig @@ -4043,12 +4038,12 @@ The default template is located at: Profil erstellen - + Profile Profil - + Site Grundstück @@ -4111,7 +4106,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Bitte ein Basisobjekt auswählen - + Roof Dach @@ -4182,7 +4177,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Vorne - + External Reference Externe Referenz @@ -4350,7 +4345,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Die Formdatei-Bibliothek kann von der folgenden URL heruntergeladen und im Makroordner installiert werden: - + Window Fenster @@ -4397,75 +4392,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Fensterbankhöhe - - + + Invert Opening Direction - Invert Opening Direction + Öffnungsrichtung umkehren - - + + Invert Hinge Position - Invert Hinge Position + Scharnierposition umkehren - + This window has no defined opening Das Fenster hat keine definierte Öffnung - - + + Get selected edge Ausgewählte Kante erhalten - + Unable to create component Komponente konnte nicht erstellt werden - + Window elements Fensterelemente - + Hole wire Kantenzug - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Die Nummer des Kantenzuges der das Loch im Host-Objekt definiert. Der Wert Null wählt automatisch den größten Kantenzug aus - + Pick Selected Pick Selected - + Create/Update Component - Create/Update Component + Komponente erstellen/aktualisiere - + Create new Component - Create new Component + Neue Komponente erstellen - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4475,7 +4470,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Entfernen @@ -4484,7 +4479,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Hinzufügen @@ -4500,38 +4495,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Bearbeiten - + Base 2D object 2D Basisobjekt - - + + Wires Kantenzüge - + Components Komponenten - + Name Name - + Type Typ @@ -4546,38 +4541,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Versatz - + Hinge Scharnier - + Opening mode Öffnungsmodus - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Drücken, um die ausgewählte Kante zu erhalten @@ -4623,7 +4618,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Erfolgreich geschrieben - + Truss Traverse @@ -4678,17 +4673,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Treppe - + Railing Geländer @@ -4698,12 +4693,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Treppe erstellen - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' Eigenschaften 'OutlineWireLeft' und 'OutlineWireRight' wurden entfernt und die Eigenschaften 'RailingLeft' und 'RailingRight' hinzugefügt - + changed the type of properties 'RailingLeft' and 'RailingRight' Typ der Eigenschaften 'RailingLeft' und 'RailingRight' geändert @@ -4732,7 +4727,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Merge Duplicates - Merge Duplicates + Duplikate zusammenführen @@ -5015,7 +5010,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5236,7 +5231,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Einheit - + Schedule Zeitplan @@ -5474,7 +5469,7 @@ Geschoß-Erstellung abgebrochen. Neue Eigenschaften-Gruppe - + Rebar Armierung @@ -5490,7 +5485,7 @@ Geschoß-Erstellung abgebrochen. Select a base face on a structural object - + Section Schnittebene @@ -5532,7 +5527,7 @@ Geschoß-Erstellung abgebrochen. Section plane placement: - Platzierung der Schnittebene: + Positionierung der Schnittebene: @@ -5624,7 +5619,7 @@ Gebäudeerstellung abgebrochen. Gebäude erstellen - + Space Raum @@ -5644,12 +5639,12 @@ Gebäudeerstellung abgebrochen. Bereichsgrenzen - + Wall Wand - + Walls can only be based on Part or Mesh objects Wände konnen nur aus Part- oder Mesh-Objekten bestehen @@ -5707,22 +5702,22 @@ Gebäudeerstellung abgebrochen. Wände vebinden - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction "Normal" zu [0, 0, 1] geändert, um die Extrusionsrichtung beizubehalten - + Cannot compute blocks for wall Blöcke für die Wand können nicht berechnet werden - + Error: Unable to modify the base object of this wall Fehler: Das Basisobjekt für diese Wand kann nicht geändert werden - + Flip Direction Richtung umkehren @@ -5939,12 +5934,12 @@ Gebäudeerstellung abgebrochen. Arch_StructuresFromSelection - + Multiple Structures Mehrfache Strukturen - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5952,12 +5947,12 @@ Gebäudeerstellung abgebrochen. Arch_StructuralSystem - + Structural System Strukturelles System - + Create a structural system from a selected structure and axis Erstelle ein Struktursystem aus einer ausgewählten Struktur und Achse @@ -5965,12 +5960,12 @@ Gebäudeerstellung abgebrochen. Arch_Structure - + Structure Struktur - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Erzeugt eine Struktur von Grund auf oder aus einem ausgewählten Objekt (Skizze, Draht, Fläche oder Festkörper) @@ -5978,146 +5973,146 @@ Gebäudeerstellung abgebrochen. App::Property - - + + An optional extrusion path for this element Ein optionaler Extrusionspfad für dieses Element - + The computed length of the extrusion path Die berechnete Länge des Extrusionspfades - + Start offset distance along the extrusion path (positive: extend, negative: trim) Startversatz entlang des Extrusionspfades (positiv: verlängern, negativ: trimmen) - + End offset distance along the extrusion path (positive: extend, negative: trim) Endversatz entlang des Extrusionspfades (positiv: verlängern, negativ: trimmen) - + Automatically align the Base of the Structure perpendicular to the Tool axis Die Basis der Struktur automatisch senkrecht zur Werkzeugachse ausrichten - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X-Versatz zwischen dem Basis-Ursprung und der Werkzeugachse (wird nur verwendet, wenn BasePerpendicularToTool auf True steht) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y-Versatz zwischen dem Basis-Ursprung und der Werkzeugachse (wird nur verwendet, wenn BasePerpendicularToTool auf True steht) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Basis entlang ihrer Y-Achse spiegeln (wird nur verwendet, wenn BasePerpendicularToTool auf True steht) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotation der Basis um die Werkzeug-Achse (funktioniert nur, wenn "Basis senkrecht zu Werkzeug"- aktiviert ist) - + The length of this element, if not based on a profile Die Länge dieses Elements, wenn es nicht auf einem Profil basiert - + The width of this element, if not based on a profile Die Breite dieses Elements, wenn es nicht auf einem Profil basiert - + The height or extrusion depth of this element. Keep 0 for automatic Die Höhe oder Extrusionstiefe dieses Elements. Für automatische Bestimmung 0 behalten - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normale Extrusionsrichtung dieses Objekts ((0,0,0) für die automatische Normale behalten) - + The structural nodes of this element Die Strukturknoten dieses Elements - + A description of the standard profile this element is based upon Eine Beschreibung des Standardprofils dieses Elements basiert darauf - + Offset distance between the centerline and the nodes line Versatzabstand zwischen der Mittellinie und der Knotenlinie - + The facemaker type to use to build the profile of this object Der Typ Flächenerzeuger, der verwendet werden soll, um das Profil dieses Objekts zu erstellen - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Ausgewählte Kanten (oder Gruppe von Kanten) der Basis-ArchSkizze verwenden, um die Form dieser BIM-Struktur zu erstellen (anstatt standardmäßig alle Kanten der Basis-Form zu verwenden). Dazu Indexnummern von Kanten oder Gruppen eingeben. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Ob die Knoten sichtbar sind - + The width of the nodes line Die Breite der Knotenlinie - + The size of the node points Die Größe der Knotenpunkte - + The color of the nodes line Die Farbe der Knotenlinie - + The type of structural node Die Art des Strukturknotens - + Axes systems this structure is built on Achsen-Systeme auf denen diese Struktur aufgebaut ist - + The element numbers to exclude when this structure is based on axes Die Elementanzahl, die ausgeschlossen werden sollen, wenn diese Struktur auf Achsen basiert - + If true the element are aligned with axes Wenn wahr, wird das Element an Achsen ausgerichtet @@ -6417,6 +6412,42 @@ Gebäudeerstellung abgebrochen. Thickness of the legs Dicke der Beine + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6595,7 +6626,7 @@ Gebäudeerstellung abgebrochen. Show the sun position for a specific date and time - Show the sun position for a specific date and time + Zeigt den Sonnenstand für ein bestimmtes Datum zu einer bestimmten Uhrzeit an @@ -6854,7 +6885,7 @@ Gebäudeerstellung abgebrochen. Zeige Elevationsöffnungssymbole, falls verfügbar - + The number of the wire that defines the hole. A value of 0 means automatic Die Nummer des Kantenzuges, die das Loch definieren. Der Wert 0 bedeutet automatisch @@ -6866,7 +6897,7 @@ Gebäudeerstellung abgebrochen. The placement of this axis system - Die Platzierung dieses Achsensystems + Die Positionierung dieses Achsensystems @@ -7111,7 +7142,7 @@ Gebäudeerstellung abgebrochen. - + The overlap of the stringers above the bottom of the treads Die Überlappung der Wangen über der Unterseite der Laufflächen @@ -7602,12 +7633,12 @@ Gebäudeerstellung abgebrochen. The number of panels - Die Anzahl der Panele + Die Anzahl der Platten The thickness of the panels - Die Dicke der Panele + Die Dicke der Platten @@ -8249,7 +8280,7 @@ Gebäudeerstellung abgebrochen. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Basis-ArchSketch (falls verwendet) Daten (z.B. Breiten, Ausrichtungen, Offsets) anstelle von Wandeigenschaften verwenden @@ -8258,12 +8289,12 @@ Gebäudeerstellung abgebrochen. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Strukturwerkzeuge @@ -9022,7 +9053,7 @@ Gebäudeerstellung abgebrochen. Toggle Subcomponents - Toggle Subcomponents + Unterkomponenten umschalten @@ -9650,7 +9681,7 @@ STRG + / um zwischen automatischem und manuellem Mosus umzuschalten Merge Duplicates - Merge Duplicates + Duplikate zusammenführen @@ -9950,7 +9981,7 @@ STRG + / um zwischen automatischem und manuellem Mosus umzuschalten Install them from menu Tools -> Addon Manager. - Install them from menu Tools -> Addon Manager. + Diese können über das Menü Werkzeuge -> Addon-Manager installiert werden. @@ -10005,7 +10036,7 @@ STRG + / um zwischen automatischem und manuellem Mosus umzuschalten Downloading images… - Downloading images… + Bilder werden heruntergeladen… @@ -10060,7 +10091,7 @@ STRG + / um zwischen automatischem und manuellem Mosus umzuschalten Add Proxy WP - Add Proxy WP + Proxy-Arbeitsebene hinzufügen @@ -10320,7 +10351,7 @@ Please check your FreeCAD installation or provide a custom template under menu P Deactivate Container - Deactivate Container + Behälter deaktivieren @@ -10924,7 +10955,7 @@ Please check your FreeCAD installation or provide a custom template under menu P New Page - Neue Seite + Neues Zeichnungsblatt @@ -11111,7 +11142,7 @@ Please check your FreeCAD installation or provide a custom template under menu P Save IFC File - Save IFC File + ICF-Datei speichern @@ -11124,7 +11155,7 @@ Please check your FreeCAD installation or provide a custom template under menu P Save IFC File As… - Save IFC File As… + IFC-Datei speichern als… @@ -11277,7 +11308,7 @@ Please check your FreeCAD installation or provide a custom template under menu P <html><head/><body><p>The preferred unit that will be used everywhere: in dialogs, measurements and dimensions. However, any other unit can be entered anytime. Changing the default unit system anytime will not cause any modification to the model. Location in preferences: <span style=" font-weight:600;">General &gt; Default unit system</span></p></body></html> - <html><head/><body><p>The preferred unit that will be used everywhere: in dialogs, measurements and dimensions. However, any other unit can be entered anytime. Changing the default unit system anytime will not cause any modification to the model. Location in preferences: <span style=" font-weight:600;">General &gt; Default unit system</span></p></body></html> + <html><head/><body><p>Die bevorzugte Einheit, die überall verwendet wird: in Dialogen, Messungen und Maßen. Allerdings kann jede andere Einheit jederzeit eingegeben werden. Das Ändern des Standard-Einheitssystems wird zu keiner Änderung des Modells führen. Standort in den Einstellungen: <span style=" font-weight:600;">Allgemein &gt; Standard-Einheitensystem</span></p></body></html> @@ -11302,7 +11333,7 @@ Please check your FreeCAD installation or provide a custom template under menu P <html><head/><body><p>The number of decimals preferred in the interface controls and measurements. Location in preferences: <span style=" font-weight:600;">General &gt; Units &gt; Number of decimals</span></p></body></html> - <html><head/><body><p>The number of decimals preferred in the interface controls and measurements. Location in preferences: <span style=" font-weight:600;">General &gt; Units &gt; Number of decimals</span></p></body></html> + <html><head/><body><p>Die Anzahl der Dezimalstellen, die in den Schnittstellensteuerungen und Messungen bevorzugt verwendet werden sollen. Standort in den Einstellungen: <span style=" font-weight:600;">Allgemein &gt; Einheiten &gt; Anzahl der Dezimalstellen</span></p></body></html> diff --git a/src/Mod/BIM/Resources/translations/Arch_el.qm b/src/Mod/BIM/Resources/translations/Arch_el.qm index c385d75fbc..16a5fc2244 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_el.qm and b/src/Mod/BIM/Resources/translations/Arch_el.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_el.ts b/src/Mod/BIM/Resources/translations/Arch_el.ts index 7da83b4175..ca224ea036 100644 --- a/src/Mod/BIM/Resources/translations/Arch_el.ts +++ b/src/Mod/BIM/Resources/translations/Arch_el.ts @@ -3770,72 +3770,67 @@ The default template is located at: Arch - Structure - Κατασκευή - - - - + Beam Δοκός - - + + Column Στήλη - + StructuralSystem StructuralSystem - + Create Structures From Selection Create Structures From Selection - + Create Structural System Create Structural System - - + + Create Structure Δημιουργία Δομής - + First point of the beam Πρώτο σημείο της δοκού - + Base point of column Σημείο βάσης στήλης - + Next point Επόμενο σημείο - + Structure options Επιλογές δομής - + Category Κατηγορία - + @@ -3845,7 +3840,7 @@ The default template is located at: - + Length @@ -3853,7 +3848,7 @@ The default template is located at: - + Width @@ -3862,158 +3857,158 @@ The default template is located at: - + Height Ύψος - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Αυτό το πλέγμα είναι ένα μη έγκυρο στερεό - + Facemaker returned an error Το Facemaker επέστρεψε ένα σφάλμα - + Node Tools κόμβος - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choose another Structure object: - - + + The chosen object is not a Structure The chosen object is not a Structure - - + + The chosen object has no structural nodes The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + Intersection found. Intersection found. - + Done Έγινε @@ -4058,12 +4053,12 @@ The default template is located at: Create Profile - + Profile Προφίλ - + Site Τοποθεσία @@ -4126,7 +4121,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Roof @@ -4197,7 +4192,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Εμπρόσθια - + External Reference External Reference @@ -4365,7 +4360,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Παράθυρο @@ -4412,75 +4407,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4490,7 +4485,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Αφαίρεση @@ -4499,7 +4494,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Προσθήκη @@ -4515,38 +4510,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Επεξεργασία - + Base 2D object Base 2D object - - + + Wires Wires - + Components Στοιχεία - + Name Όνομα - + Type Τύπος @@ -4561,38 +4556,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Μετατοπίστε - + Hinge Hinge - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4638,7 +4633,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Truss @@ -4693,17 +4688,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Έργο - + Stairs Σκαλιά - + Railing Railing @@ -4713,12 +4708,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Stairs - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5030,7 +5025,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5251,7 +5246,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Μονάδα - + Schedule Schedule @@ -5492,7 +5487,7 @@ Floor creation aborted. New property set - + Rebar Ράβδοι οπλισμού @@ -5508,7 +5503,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Τομή @@ -5642,7 +5637,7 @@ Building creation aborted. Create Building - + Space Χώρος @@ -5662,12 +5657,12 @@ Building creation aborted. Space boundaries - + Wall Wall - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5725,22 +5720,22 @@ Building creation aborted. Merge Walls - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5957,12 +5952,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Πολλαπλές Δομές - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5970,12 +5965,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Structural System - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5983,12 +5978,12 @@ Building creation aborted. Arch_Structure - + Structure Κατασκευή - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -5996,146 +5991,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6435,6 +6430,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6872,7 +6903,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7129,7 +7160,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8267,7 +8298,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8276,12 +8307,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_es-ES.qm b/src/Mod/BIM/Resources/translations/Arch_es-ES.qm index 96153d5a81..dba4cb275e 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_es-ES.qm and b/src/Mod/BIM/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_es-ES.ts b/src/Mod/BIM/Resources/translations/Arch_es-ES.ts index a39183a6dc..7c86db0586 100644 --- a/src/Mod/BIM/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/BIM/Resources/translations/Arch_es-ES.ts @@ -3764,72 +3764,67 @@ The default template is located at: Arch - Structure - Estructura - - - - + Beam Viga - - + + Column Columna - + StructuralSystem Sistema estructural - + Create Structures From Selection Crear estructuras a partir de la selección - + Create Structural System Crear Sistema Estructural - - + + Create Structure Crear estructura - + First point of the beam Primer punto de la viga - + Base point of column Punto base de la columna - + Next point Siguiente punto - + Structure options Opciones de la estructura - + Category Categoría - + @@ -3839,7 +3834,7 @@ The default template is located at: - + Length @@ -3847,7 +3842,7 @@ The default template is located at: - + Width @@ -3856,158 +3851,158 @@ The default template is located at: - + Height Altura - + Parameters of the structure Parámetros de la estructura - + Switch Length/Height Cambiar longitud/altura - + Switch Length/Width Cambiar longitud/ancho - - + + This mesh is an invalid solid Esta malla es un sólido no válido - + Facemaker returned an error Facemaker devolvió un error - + Node Tools Herramientas de nodo - + Extends the nodes of this element to reach the nodes of another element Extiende los nodos de este elemento para alcanzar los nodos de otro elemento - + Connects nodes of this element with the nodes of another element Conecta los nodos de este elemento con los nodos de otro elemento - + Toggles all structural nodes of the document on/off Activa/desactiva todos los nodos estructurales del documento - + Extrusion Tools Herramientas de extrusión - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Elegir otro objeto de estructura: - - + + The chosen object is not a Structure El objeto elegido no es una estructura - - + + The chosen object has no structural nodes El objeto seleccionado no tiene nodos estructurales - - + + One of these objects has more than 2 nodes Uno de estos objetos tiene más de 2 nodos - - + + Unable to find a suitable intersection point No se puede encontrar un punto de intersección adecuado - + Intersection found. Intersección encontrada. - + Intersection found. Intersección encontrada. - + Done Hecho @@ -4052,12 +4047,12 @@ The default template is located at: Crear Perfil - + Profile Perfíl - + Site Sitio @@ -4120,7 +4115,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Por favor, seleccione un objeto base - + Roof Cubierta @@ -4191,7 +4186,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Alzado - + External Reference Referencia Externa @@ -4359,7 +4354,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela La biblioteca shapefile puede descargarse desde la siguiente URL e instalarse en la carpeta de macros: - + Window Ventana @@ -4406,75 +4401,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Altura de antepecho - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Esta ventana no tiene una apertura definida - - + + Get selected edge Obtener arista seleccionada - + Unable to create component No es posible crear el componente - + Window elements Elementos de ventana - + Hole wire Agujero de alambre - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire El número del alambre que define un agujero en el objeto huésped. Un valor de cero adoptará automáticamente el alambre más grande - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4484,7 +4479,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Quitar @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Añadir @@ -4509,38 +4504,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar - + Base 2D object Objeto base 2D - - + + Wires Alambres - + Components Componentes - + Name Nombre - + Type Tipo @@ -4555,38 +4550,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Desfase - + Hinge Bisagra - + Opening mode Modo de apertura - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Presione para recuperar la arista seleccionada @@ -4632,7 +4627,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Escrito correctamente - + Truss Celosía @@ -4687,17 +4682,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Proyecto - + Stairs Escaleras - + Railing Barandilla @@ -4707,12 +4702,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Crear escalera - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' Se eliminaron las propiedades 'OutlineWireLeft' y 'OutlineWireright', y se añadieron propiedades 'RailingLeft' y 'RailingRight - + changed the type of properties 'RailingLeft' and 'RailingRight' Se cambió el tipo de propiedades 'RailingLeft' y 'RailingRight @@ -5024,7 +5019,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5245,7 +5240,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unidad - + Schedule Tabla de Planificación @@ -5486,7 +5481,7 @@ Creación de planta cancelada. Nuevo conjunto de propiedades - + Rebar Refuerzo @@ -5502,7 +5497,7 @@ Creación de planta cancelada. Select a base face on a structural object - + Section Sección @@ -5636,7 +5631,7 @@ Creación de Edificio cancelada. Crear Edificio - + Space Espacio @@ -5656,12 +5651,12 @@ Creación de Edificio cancelada. Fronteras de espacio - + Wall Muro - + Walls can only be based on Part or Mesh objects Los muros solo pueden basarse en objetos de tipo malla o parte @@ -5719,22 +5714,22 @@ Creación de Edificio cancelada. Combinar muros - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction se cambió 'Normal' a [0, 0, 1] para preservar la dirección de extrusión - + Cannot compute blocks for wall No se puede calcular los bloques para el muro - + Error: Unable to modify the base object of this wall Error: No se puede modificar el objeto base de este muro - + Flip Direction Flip Direction @@ -5951,12 +5946,12 @@ Creación de Edificio cancelada. Arch_StructuresFromSelection - + Multiple Structures Múltiples estructuras - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5964,12 +5959,12 @@ Creación de Edificio cancelada. Arch_StructuralSystem - + Structural System Sistema estructural - + Create a structural system from a selected structure and axis Crea un sistema estructural de una estructura seleccionada y de su eje @@ -5977,12 +5972,12 @@ Creación de Edificio cancelada. Arch_Structure - + Structure Estructura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Crea una estructura desde cero o desde un objeto seleccionado (sketch, alambre, cara o sólido) @@ -5990,146 +5985,146 @@ Creación de Edificio cancelada. App::Property - - + + An optional extrusion path for this element Una ruta de extrusión opcional para este elemento - + The computed length of the extrusion path La longitud calculada de la ruta de extrusión - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distancia de desfase inicial a lo largo de la ruta de extrusión (positiva: extiende, negativa: reduce) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distancia de desfase final a lo largo de la ruta de extrusión (positiva: extiende, negativa: reduce) - + Automatically align the Base of the Structure perpendicular to the Tool axis Alinear automáticamente la base de la estructura perpendicular al eje de herramienta - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Desfase X entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Desfase Y entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Simula la base a lo largo de su eje Y (sólo se utiliza si BasePerpendicularToTool es verdadero) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotación base alrededor del eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil - + The height or extrusion depth of this element. Keep 0 for automatic La altura o profundidad de extrusión de este elemento. Mantener 0 para automático - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The structural nodes of this element Los nodos estructurales de este elemento - + A description of the standard profile this element is based upon Una descripción del perfil estándar en el que este elemento se basa - + Offset distance between the centerline and the nodes line Distancia de desfase entre la línea central y la línea de nodos - + The facemaker type to use to build the profile of this object El tipo facemaker se usa para construir el perfil de este objeto - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Bordes seleccionados (o grupo de bordes) del ArchSketch base, para usar en la creación de la forma de esta Estructura BIM (en lugar de usar todos los bordes de la forma base por defecto). La entrada son números de índice de bordes o grupos. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Si los nodos son visibles o no - + The width of the nodes line El ancho de la línea de los nodos - + The size of the node points El tamaño de los puntos de nodo - + The color of the nodes line El color de la línea de nodos - + The type of structural node El tipo de nodo estructural - + Axes systems this structure is built on Sistemas de ejes sobre los que esta estructura está construida - + The element numbers to exclude when this structure is based on axes El número de elementos a excluir cuando esta estructura esta basada en ejes - + If true the element are aligned with axes Si es verdadero el elemento está alineado con los ejes @@ -6429,6 +6424,42 @@ Creación de Edificio cancelada. Thickness of the legs Espesor de los lados + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6866,7 +6897,7 @@ Creación de Edificio cancelada. Muestra los símbolos de apertura de la elevación si están disponibles - + The number of the wire that defines the hole. A value of 0 means automatic El número del alambre que define el agujero. Un valor de 0 significa automático @@ -7123,7 +7154,7 @@ Creación de Edificio cancelada. - + The overlap of the stringers above the bottom of the treads La superposición de los largueros sobre la parte inferior de las huellas @@ -8261,7 +8292,7 @@ Creación de Edificio cancelada. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Usar los datos Base ArchSketch (si se utiliza) como (anchuras, alineaciones, desfases) en lugar de las propiedades del muro @@ -8270,12 +8301,12 @@ Creación de Edificio cancelada. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Herramientas de estructura diff --git a/src/Mod/BIM/Resources/translations/Arch_eu.qm b/src/Mod/BIM/Resources/translations/Arch_eu.qm index 585e10d0b5..51a246c399 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_eu.qm and b/src/Mod/BIM/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_eu.ts b/src/Mod/BIM/Resources/translations/Arch_eu.ts index 92b8f666bd..807e6947d7 100644 --- a/src/Mod/BIM/Resources/translations/Arch_eu.ts +++ b/src/Mod/BIM/Resources/translations/Arch_eu.ts @@ -3773,72 +3773,67 @@ The default template is located at: Arch - Structure - Egitura - - - - + Beam Habea - - + + Column Zutabea - + StructuralSystem Egiturazko sistema - + Create Structures From Selection Sortu egiturak hautapenetik - + Create Structural System Sortu egiturazko sistema - - + + Create Structure Sortu azpiegitura - + First point of the beam Habearen lehen puntua - + Base point of column Zutabearen oinarri-puntua - + Next point Hurrengo puntua - + Structure options Egitura-aukerak - + Category Kategoria - + @@ -3848,7 +3843,7 @@ The default template is located at: - + Length @@ -3856,7 +3851,7 @@ The default template is located at: - + Width @@ -3865,158 +3860,158 @@ The default template is located at: - + Height Altuera - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Amaraun hau solido baliogabea da - + Facemaker returned an error Aurpegi-sortzaileak errorea eman du - + Node Tools Nodo-tresnak - + Extends the nodes of this element to reach the nodes of another element Elementu honen nodoak luzatzen ditu beste elementu bateko nodoetara iristeko - + Connects nodes of this element with the nodes of another element Elementu honen nodoak beste elementu bateko nodoekin konektatzen ditu - + Toggles all structural nodes of the document on/off Dokumentuaren egitura-nodo guztiak aktibatzen/desaktibatzen ditu - + Extrusion Tools Estrusio-tresnak - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Aukeratu beste egitura-objektu bat: - - + + The chosen object is not a Structure Aukeratutako objektua ez da egitura bat - - + + The chosen object has no structural nodes Aukeratutako objektuak ez du egitura-nodorik - - + + One of these objects has more than 2 nodes Objektu hauetako batek 2 nodo baino gehiago ditu - - + + Unable to find a suitable intersection point Ezin izan da ebakidura-puntu egoki bat aurkitu - + Intersection found. Ebakidura aurkitu da. - + Intersection found. Ebakidura aurkitu da. - + Done Egina @@ -4061,12 +4056,12 @@ The default template is located at: Sortu profila - + Profile Profila - + Site Gunea @@ -4129,7 +4124,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Hautatu oinarri-objektu bat - + Roof Teilatua @@ -4200,7 +4195,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Aurrekoa - + External Reference Kanpoko erreferentzia @@ -4368,7 +4363,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile liburutegia hurrengo URLtik deskargatu daiteke, zure makroen karpetan instalatu dadin: - + Window Leihoa @@ -4415,75 +4410,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Leiho-barrenaren altuera - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Leiho honek ez du irekierarik definituta - - + + Get selected edge Hartu hautatutako ertza - + Unable to create component Ezin izan da osagaia sortu - + Window elements Leiho-elementuak - + Hole wire Zulo-alanbrea - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Ostalari-objektuan zulo bat definitzen duen alanbrearen zenbakia. Zero balioak alanbrerik luzeena hartuko du automatikoki - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Kendu @@ -4502,7 +4497,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Gehitu @@ -4518,38 +4513,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editatu - + Base 2D object 2D oinarri-objektua - - + + Wires Alanbreak - + Components Osagaiak - + Name Izena - + Type Mota @@ -4564,38 +4559,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Desplazamendua - + Hinge Gontza - + Opening mode Irekitze modua - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Sakatu hautatutako ertza atzitzeko @@ -4641,7 +4636,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ongi idatzi da - + Truss Zurajea @@ -4696,17 +4691,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Proiektua - + Stairs Eskailera - + Railing Baranda @@ -4716,12 +4711,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sortu eskailera - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' 'OutlineWireLeft' eta 'OutlineWireRight' propietateak kendu dira eta'RailingLeft' eta 'RailingRight' propietateak gehitu dira - + changed the type of properties 'RailingLeft' and 'RailingRight' 'RailingLeft' eta 'RailingRight' propietateen mota aldatu da @@ -5033,7 +5028,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5254,7 +5249,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unitatea - + Schedule Programazioa @@ -5495,7 +5490,7 @@ Solairuaren sorrera utzi egin da. Propietate multzo berria - + Rebar Armadura-barra @@ -5511,7 +5506,7 @@ Solairuaren sorrera utzi egin da. Select a base face on a structural object - + Section Sekzioa @@ -5645,7 +5640,7 @@ Eraikinaren sorrera utzi egin da. Sortu eraikina - + Space Espazioa @@ -5665,12 +5660,12 @@ Eraikinaren sorrera utzi egin da. Espazio-mugak - + Wall Pareta - + Walls can only be based on Part or Mesh objects Pareten oinarrizko objektuak piezak edo amaraunak soilik izan daitezke @@ -5728,22 +5723,22 @@ Eraikinaren sorrera utzi egin da. Fusionatu paretak - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Ezin dira blokeak kalkulatu paretarako - + Error: Unable to modify the base object of this wall Errorea: Ezin izan da aldatu pareta honen oinarri-objektua - + Flip Direction Flip Direction @@ -5960,12 +5955,12 @@ Eraikinaren sorrera utzi egin da. Arch_StructuresFromSelection - + Multiple Structures Egitura anitz - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5973,12 +5968,12 @@ Eraikinaren sorrera utzi egin da. Arch_StructuralSystem - + Structural System Egiturazko sistema - + Create a structural system from a selected structure and axis Sortu egiturazko sistema bat hautatutako egitura bat eta ardatz bat erabilita @@ -5986,12 +5981,12 @@ Eraikinaren sorrera utzi egin da. Arch_Structure - + Structure Egitura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Egitura bat sortzen du, zerotik hasita edo hautatutako objektu batetik (krokis, alanbre, aurpegi edo solido bat) @@ -5999,146 +5994,146 @@ Eraikinaren sorrera utzi egin da. App::Property - - + + An optional extrusion path for this element Aukerako estrusio-bide bat elementu honetarako - + The computed length of the extrusion path Estrusio-bidearen luzera kalkulatua - + Start offset distance along the extrusion path (positive: extend, negative: trim) Hasierako desplazamendu-distantzia estrusio-bidean zehar (positiboa: luzatu, negatiboa: muxarratu) - + End offset distance along the extrusion path (positive: extend, negative: trim) Amaierako desplazamendu-distantzia estrusio-bidean zehar (positiboa: luzatu, negatiboa: muxarratu) - + Automatically align the Base of the Structure perpendicular to the Tool axis Lerrokatu automatikoki egituraren oinarria tresna-ardatzarekiko perpendikularrean - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X desplazamendua oinarri-jatorriaren eta tresna-ardatzaren artean (BasePerpendicularToTool egia bada soilik erabilia) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y desplazamendua oinarri-jatorriaren eta tresna-ardatzaren artean (BasePerpendicularToTool egia bada soilik erabilia) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Ispilatu oinarria bere Y ardatzaren luzeran (BasePerpendicularToTool egia bada soilik erabilia) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Oinarriaren biraketa tresna-ardatzaren inguruan (BasePerpendicularToTool egia bada soilik erabilia) - + The length of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago - + The width of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago - + The height or extrusion depth of this element. Keep 0 for automatic Elementu honen altuera edo estrusio-sakonera. Mantendu 0 balio automatikoa erabiltzeko - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Objektu honen estrusio-norabide normala (mantendu (0,0,0) normal automatikorako) - + The structural nodes of this element Elementu honen egiturazko nodoak - + A description of the standard profile this element is based upon Elementu honek oinarritzat duen profil estandarraren deskribapena - + Offset distance between the centerline and the nodes line Erdiko lerroaren eta nodo-lerroen arteko desplazamendu-distantzia - + The facemaker type to use to build the profile of this object Objektu honen profila eraikitzeko erabiliko den aurpegi-sortzailearen mota - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Nodoak ikusgai dauden ala ez - + The width of the nodes line Nodo-lerroaren zabalera - + The size of the node points Nodo-puntuen tamaina - + The color of the nodes line Nodo-lerroaren kolorea - + The type of structural node Egitura-nodoaren mota - + Axes systems this structure is built on Egitura honen oinarria diren ardatz-sistemak - + The element numbers to exclude when this structure is based on axes Egitura hau ardatzetan oinarrituta dagoenean baztertuko diren elementuen zenbakiak - + If true the element are aligned with axes Egia bada, elementuak ardatzekin lerrokatuta daude @@ -6438,6 +6433,42 @@ Eraikinaren sorrera utzi egin da. Thickness of the legs Hanken lodiera + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6875,7 +6906,7 @@ Eraikinaren sorrera utzi egin da. Erakutsi garaiera-irekiguneen ikurrak, erabilgarri badaude - + The number of the wire that defines the hole. A value of 0 means automatic Zuloa definitzen duen alanbrearen zenbakia. 0 balioak automatikoa esan nahi du @@ -7132,7 +7163,7 @@ Eraikinaren sorrera utzi egin da. - + The overlap of the stringers above the bottom of the treads Zankabeen gainjartzea mailagainen behealdearen gainetik @@ -8270,7 +8301,7 @@ Eraikinaren sorrera utzi egin da. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8279,12 +8310,12 @@ Eraikinaren sorrera utzi egin da. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Egitura-tresnak diff --git a/src/Mod/BIM/Resources/translations/Arch_fi.qm b/src/Mod/BIM/Resources/translations/Arch_fi.qm index efe595e1f5..deb3b8218f 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_fi.qm and b/src/Mod/BIM/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_fi.ts b/src/Mod/BIM/Resources/translations/Arch_fi.ts index 1d33311ace..4062de1abc 100644 --- a/src/Mod/BIM/Resources/translations/Arch_fi.ts +++ b/src/Mod/BIM/Resources/translations/Arch_fi.ts @@ -3774,72 +3774,67 @@ The default template is located at: Arch - Structure - Rakenne - - - - + Beam Palkki - - + + Column Pilari - + StructuralSystem RakenneJärjestelmä - + Create Structures From Selection Create Structures From Selection - + Create Structural System Create Structural System - - + + Create Structure Create Structure - + First point of the beam First point of the beam - + Base point of column Pilarin peruspiste - + Next point Next point - + Structure options Structure options - + Category Kategoria - + @@ -3849,7 +3844,7 @@ The default template is located at: - + Length @@ -3857,7 +3852,7 @@ The default template is located at: - + Width @@ -3866,158 +3861,158 @@ The default template is located at: - + Height Korkeus - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error - + Node Tools Node Tools - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choose another Structure object: - - + + The chosen object is not a Structure The chosen object is not a Structure - - + + The chosen object has no structural nodes The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + Intersection found. Intersection found. - + Done Valmis @@ -4062,12 +4057,12 @@ The default template is located at: Luo profiili - + Profile Profiili - + Site Sijainti @@ -4130,7 +4125,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Katto @@ -4201,7 +4196,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Etupuoli - + External Reference Ulkoinen viittaus @@ -4369,7 +4364,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Ikkuna @@ -4416,75 +4411,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4494,7 +4489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Poista @@ -4503,7 +4498,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Lisää @@ -4519,38 +4514,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Muokkaa - + Base 2D object Base 2D object - - + + Wires Wires - + Components Osat - + Name Nimi - + Type Tyyppi @@ -4565,38 +4560,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Siirtymä - + Hinge Hinge - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4642,7 +4637,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Truss @@ -4697,17 +4692,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekti - + Stairs Portaat - + Railing Kaide @@ -4717,12 +4712,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Stairs - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5034,7 +5029,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5255,7 +5250,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Yksikkö - + Schedule Schedule @@ -5496,7 +5491,7 @@ Floor creation aborted. New property set - + Rebar Raudoitustanko @@ -5512,7 +5507,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Leikkaus @@ -5646,7 +5641,7 @@ Building creation aborted. Luo rakennus - + Space Tila @@ -5666,12 +5661,12 @@ Building creation aborted. Space boundaries - + Wall Seinä - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5729,22 +5724,22 @@ Building creation aborted. Merge Walls - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5961,12 +5956,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Multiple Structures - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5974,12 +5969,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Structural System - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5987,12 +5982,12 @@ Building creation aborted. Arch_Structure - + Structure Rakenne - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -6000,146 +5995,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line Solmuviivojen leveys - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6439,6 +6434,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6876,7 +6907,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7133,7 +7164,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8271,7 +8302,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8280,12 +8311,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_fr.qm b/src/Mod/BIM/Resources/translations/Arch_fr.qm index c49ab2a622..af9f24e776 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_fr.qm and b/src/Mod/BIM/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_fr.ts b/src/Mod/BIM/Resources/translations/Arch_fr.ts index db496fa4c7..379e0de030 100644 --- a/src/Mod/BIM/Resources/translations/Arch_fr.ts +++ b/src/Mod/BIM/Resources/translations/Arch_fr.ts @@ -3797,72 +3797,67 @@ The default template is located at: Arch - Structure - Structure - - - - + Beam Poutre - - + + Column Colonne - + StructuralSystem Système structurel - + Create Structures From Selection Créer des structures à partir de la sélection - + Create Structural System Créer un système structurel - - + + Create Structure Créer une structure - + First point of the beam Premier point de la poutre - + Base point of column Coordonnées du point de base de la colonne - + Next point Point suivant - + Structure options Options de la structure - + Category Catégorie - + @@ -3872,7 +3867,7 @@ The default template is located at: - + Length @@ -3880,7 +3875,7 @@ The default template is located at: - + Width @@ -3889,157 +3884,157 @@ The default template is located at: - + Height Hauteur - + Parameters of the structure Paramètres de la structure - + Switch Length/Height Permuter longueur/hauteur - + Switch Length/Width Permuter longueur/largeur - - + + This mesh is an invalid solid Ce maillage n'est pas un solide valide - + Facemaker returned an error FaceMaker a retourné une erreur. - + Node Tools Outils pour les nœuds - + Extends the nodes of this element to reach the nodes of another element Étendre les nœuds de cet élément pour atteindre les nœuds d’un autre élément - + Connects nodes of this element with the nodes of another element Connecter les nœuds de cet élément avec les nœuds d’un autre élément - + Toggles all structural nodes of the document on/off Active/désactive tous les noeuds structurels du document - + Extrusion Tools Outils d'extrusion - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choisir un autre objet Structure : - - + + The chosen object is not a Structure L’objet sélectionné n’est pas une structure - - + + The chosen object has no structural nodes L’objet sélectionné n’a pas de nœuds structurels - - + + One of these objects has more than 2 nodes Un de ces objets possède plus de 2 nœuds - - + + Unable to find a suitable intersection point Impossible de trouver un point d’intersection adapté - + Intersection found. Intersection trouvée - + Intersection found. Intersection trouvée. - + Done Fait @@ -4084,12 +4079,12 @@ The default template is located at: Créer un profilé - + Profile Profilé - + Site Site @@ -4152,7 +4147,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sélectionner un objet de base - + Roof Toit @@ -4223,7 +4218,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Devant - + External Reference Référence externe @@ -4391,7 +4386,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela La bibliothèque Shapefile peut être téléchargée à partir de l'URL suivante et installée dans votre dossier des macros : - + Window Fenêtre @@ -4438,76 +4433,76 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Hauteur de l'allège - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Cette fenêtre n'a pas d'ouverture définie. - - + + Get selected edge Obtenir l’arête sélectionnée - + Unable to create component Impossible de créer le composant - + Window elements Éléments de la fenêtre - + Hole wire Nombre de lignes - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Le nombre de lignes qui définit une ouverture dans l'objet hôte. Une valeur de zéro adoptera automatiquement la ligne la plus grande. - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4517,7 +4512,7 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. - + Remove Supprimer @@ -4526,7 +4521,7 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. - + Add Ajouter @@ -4542,38 +4537,38 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. - + Edit Éditer - + Base 2D object Objet 2D de base - - + + Wires Polylignes - + Components Composants - + Name Nom - + Type Type @@ -4588,38 +4583,38 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. - + Offset Décaler - + Hinge Charnière - + Opening mode Mode d’ouverture - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Appuyer pour récupérer l’arête sélectionnée @@ -4665,7 +4660,7 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. Écrit avec succès - + Truss Treillis @@ -4720,17 +4715,17 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. View of {panel.Label} - + Project Projet - + Stairs Escaliers - + Railing Garde-corps @@ -4740,12 +4735,12 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. Créer un escalier - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' a supprimé les propriétés "OutlineWireLeft" et "OutlineWireRight" et a ajouté les propriétés "RailingLeft" et "RailingRight" - + changed the type of properties 'RailingLeft' and 'RailingRight' a changé le type de propriétés "RailingLeft" et "RailingRight" @@ -5057,7 +5052,7 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. - + Could not compute a shape Could not compute a shape @@ -5278,7 +5273,7 @@ valeur de zéro adoptera automatiquement la ligne la plus grande. Unité - + Schedule Nomenclature @@ -5514,7 +5509,7 @@ Floor creation aborted. Nouveau jeu de propriétés - + Rebar Armature @@ -5530,7 +5525,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Coupe @@ -5661,7 +5656,7 @@ La création du bâtiment est annulée. Créer un bâtiment - + Space Espace @@ -5681,12 +5676,12 @@ La création du bâtiment est annulée. Limites de l’espace - + Wall Mur - + Walls can only be based on Part or Mesh objects Les murs ne peuvent être créés qu'à l'aide d'objets de Part ou de Mesh @@ -5744,22 +5739,22 @@ La création du bâtiment est annulée. Fusionner des murs - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction a changé "Normal" en [0, 0, 1] pour préserver la direction de l'extrusion - + Cannot compute blocks for wall Le calcul des briques pour le mur n'est pas possible. - + Error: Unable to modify the base object of this wall Erreur : impossible de modifier l’objet base de ce mur - + Flip Direction Flip Direction @@ -5976,12 +5971,12 @@ La création du bâtiment est annulée. Arch_StructuresFromSelection - + Multiple Structures Structures multiples - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5989,12 +5984,12 @@ La création du bâtiment est annulée. Arch_StructuralSystem - + Structural System Système structurel - + Create a structural system from a selected structure and axis Créer un système structurel à partir d'une structure et d'un axe sélectionnés @@ -6002,12 +5997,12 @@ La création du bâtiment est annulée. Arch_Structure - + Structure Structure - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Créer une structure à partir de zéro ou à partir d'un objet sélectionné : esquisse, polyligne, face ou solide @@ -6015,146 +6010,146 @@ La création du bâtiment est annulée. App::Property - - + + An optional extrusion path for this element Une trajectoire d'extrusion facultative pour cet élément - + The computed length of the extrusion path La longueur calculée de la trajectoire d'extrusion - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distance du décalage au départ le long de la trajectoire de l'extrusion (positif : étendre ; négatif : rétrécir) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distance du décalage à la fin le long de la trajectoire de l'extrusion (positif : étendre ; négatif : rétrécir) - + Automatically align the Base of the Structure perpendicular to the Tool axis Aligner automatiquement la base de la structure perpendiculairement à l'axe de l'outil - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Décalage en X entre l'origine de la base et l'axe de l'outil (utilisé uniquement si BasePerpendicularToTool est mis à vrai) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Décalage en Y entre l'origine de la base et l'axe de l'outil (utilisé uniquement si BasePerpendicularToTool est mis à vrai) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Retourner la base le long de son axe Y (utilisé uniquement si BasePerpendicularToTool est mis à vrai) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Faire pivoter la base autour de l'axe de l'outil (utilisé uniquement si BasePerpendicularToTool est mis à vrai) - + The length of this element, if not based on a profile La longueur de cet élément s'il n'est pas basé sur un profil - + The width of this element, if not based on a profile La largeur de cet élément s'il n'est pas basé sur un profilé. - + The height or extrusion depth of this element. Keep 0 for automatic La hauteur ou profondeur d’extrusion de cet élément. Laisser à 0 pour un réglage automatique - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direction d'extrusion normale de cet objet (laisser à (0,0,0) pour une normale automatique) - + The structural nodes of this element Les nœuds structurels de cet élément - + A description of the standard profile this element is based upon Une description du profilé standard sur lequel cet élément est basé - + Offset distance between the centerline and the nodes line Décalage entre la ligne centrale et la ligne des nœuds - + The facemaker type to use to build the profile of this object Le type de générateur de surface à utiliser pour créer le profilé de cet objet - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Arêtes sélectionnées (ou groupe d'arêtes) de base d'ArchSketch, à utiliser pour créer la forme de cette structure BIM (au lieu d'utiliser toutes les arêtes de la forme de base par défaut). Les données saisies sont des numéros d'index des arêtes ou des groupes. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Sélectionner le jeu de propriétés défini par l'utilisateur à utiliser pour créer une variante de forme, avec le même ArchSketch - + If the nodes are visible or not Si les nœuds sont visibles ou pas - + The width of the nodes line La largeur de la ligne des nœuds - + The size of the node points La taille des points des nœuds - + The color of the nodes line La couleur de la ligne des nœuds - + The type of structural node Le type de nœud structurel - + Axes systems this structure is built on Les systèmes d'axes sur lesquels cette structure est construite - + The element numbers to exclude when this structure is based on axes Le nombre d’éléments à exclure lorsque cette structure est basée sur les axes - + If true the element are aligned with axes Si mis à vrai, l'élément est aligné avec les axes @@ -6454,6 +6449,42 @@ La création du bâtiment est annulée. Thickness of the legs Épaisseur des supports + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6893,7 +6924,7 @@ documentation du site pour savoir comment en obtenir un. Afficher les symboles des ouvertures en élévation s’ils sont disponibles - + The number of the wire that defines the hole. A value of 0 means automatic Le nombre de lignes qui définit le trou. Une valeur de 0 signifie automatique. @@ -7150,7 +7181,7 @@ documentation du site pour savoir comment en obtenir un. - + The overlap of the stringers above the bottom of the treads Le chevauchement des limons au-dessus du bas des marches @@ -8300,7 +8331,7 @@ Attention : non 'Toponaming-Tolerant' si Sketch est seulement utilisé.Sélectionner le jeu de propriétés défini par l'utilisateur à utiliser pour créer des variantes de forme, des couches du Arch mur avec le même ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Utiliser les données de base de ArchSketch (si utilisé) (ex : largeurs, alignements, décalages) au lieu des propriétés du mur @@ -8309,12 +8340,12 @@ Attention : non 'Toponaming-Tolerant' si Sketch est seulement utilisé. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Outils pour les structures diff --git a/src/Mod/BIM/Resources/translations/Arch_hr.qm b/src/Mod/BIM/Resources/translations/Arch_hr.qm index bb45be2178..a44274c65a 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_hr.qm and b/src/Mod/BIM/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_hr.ts b/src/Mod/BIM/Resources/translations/Arch_hr.ts index 7543b1f6ad..6f5e649822 100644 --- a/src/Mod/BIM/Resources/translations/Arch_hr.ts +++ b/src/Mod/BIM/Resources/translations/Arch_hr.ts @@ -3792,72 +3792,67 @@ The default template is located at: Arch - Structure - Struktura - - - - + Beam Zraka - - + + Column Stupac - + StructuralSystem StrukturniSustav - + Create Structures From Selection Izradite konstrukcije iz odabira - + Create Structural System Napravi konstrukcijski sustav - - + + Create Structure Izgradi Strukturu - + First point of the beam Prva točka nosača - + Base point of column Bazna točka stupca - + Next point Sljedeća točka - + Structure options Opcije Konstrukcije - + Category Kategorija - + @@ -3867,7 +3862,7 @@ The default template is located at: - + Length @@ -3875,7 +3870,7 @@ The default template is located at: - + Width @@ -3886,158 +3881,158 @@ The default template is located at: - + Height Visina - + Parameters of the structure Parametri strukture - + Switch Length/Height Zamijeni Dužina/Visina - + Switch Length/Width Zamijeni Dužina/Širina - - + + This mesh is an invalid solid Ova mreža je nevažeće čvrsto tijelo - + Facemaker returned an error Graditelj lica je vratio pogrešku - + Node Tools Alati Čvora - + Extends the nodes of this element to reach the nodes of another element Produžuje čvorove ovog elementa da dohvate čvorove drugog elementa - + Connects nodes of this element with the nodes of another element Povezuje čvorove ovog elementa sa čvorovima drugog elementa - + Toggles all structural nodes of the document on/off Uključuje/isključuje sve strukturne čvorove dokumenta - + Extrusion Tools Alati istiskivanja - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Odaberite drugi strukturni objekt: - - + + The chosen object is not a Structure Odabrani objekt nije struktura - - + + The chosen object has no structural nodes Odabrani objekt nema strukturna čvorišta - - + + One of these objects has more than 2 nodes Jedan od tih objekata ima više od 2 čvorišta - - + + Unable to find a suitable intersection point Nije moguće pronaći prikladno sjecište - + Intersection found. Sjecište našao. - + Intersection found. Sjecište našao. - + Done Gotovo @@ -4082,12 +4077,12 @@ The default template is located at: Napravi profil - + Profile Profili - + Site Lokacija @@ -4150,7 +4145,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Odaberite osnovni objekt - + Roof Krovište @@ -4221,7 +4216,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Prednje - + External Reference Vanjska referenca @@ -4395,7 +4390,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Window Prozor @@ -4444,77 +4439,77 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Visina prozorske klupčice - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Ovaj prozor nema definiran otvor - - + + Get selected edge Zadrži odabrani rub - + Unable to create component Nije moguće stvoriti komponentu - + Window elements Elementi prozora - + Hole wire Šuplja žica - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Broj žice ruba koji definira rupu u glavnom objektu. Vrijednost nula će automatski prihvatiti najdužu žicu ruba - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4524,7 +4519,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Ukloni @@ -4533,7 +4528,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -4549,38 +4544,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Uredi - + Base 2D object Osnovni 2D objekt - - + + Wires Žice - + Components Komponente - + Name Ime - + Type Tip @@ -4595,38 +4590,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Pomak - + Hinge Šarka - + Opening mode Način otvaranja - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Kliknite da biste dohvatili odabrani rub @@ -4674,7 +4669,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Uspješno napisan - + Truss Poprečna greda @@ -4729,17 +4724,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Stube - + Railing Ograda @@ -4749,12 +4744,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Napravi Stepenište - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' uklonjena svojstva 'OutlineWireLeft' and 'OutlineWireRight', i dodana svojstva 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' promijenio tip svojstava 'RailingLeft' i 'RailingRight' @@ -5066,7 +5061,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5289,7 +5284,7 @@ Here is a breakdown of the translation: Jedinica - + Schedule Raspored @@ -5530,7 +5525,7 @@ Stvaranje etaže prekinuto. Skup novih svojstava - + Rebar Građevinsko željezo @@ -5546,7 +5541,7 @@ Stvaranje etaže prekinuto. Select a base face on a structural object - + Section Odjeljak @@ -5680,7 +5675,7 @@ Stvaranje zgrade prekinuto. Izradi Zgradu - + Space Prostor @@ -5700,12 +5695,12 @@ Stvaranje zgrade prekinuto. Granice prostora - + Wall Zid - + Walls can only be based on Part or Mesh objects Zidovi mogu temeljiti samo na objektima Dio ili Mreža @@ -5763,22 +5758,22 @@ Stvaranje zgrade prekinuto. Spajanje zidova - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction promijenjena 'Normala' u [0, 0, 1] kako bi sačuvao smjer istiskivanja - + Cannot compute blocks for wall Ne može izračunati blokove za zid - + Error: Unable to modify the base object of this wall Pogreška: Nije moguće izmijeniti osnovni objekt ovog zida - + Flip Direction Flip Direction @@ -5995,12 +5990,12 @@ Stvaranje zgrade prekinuto. Arch_StructuresFromSelection - + Multiple Structures Višestruke Konstrukcije - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -6008,12 +6003,12 @@ Stvaranje zgrade prekinuto. Arch_StructuralSystem - + Structural System Konstrukcijski Sustav - + Create a structural system from a selected structure and axis Izrada konstrukcijskog sustava iz odabrane konstrukcije i osi @@ -6021,12 +6016,12 @@ Stvaranje zgrade prekinuto. Arch_Structure - + Structure Strukture - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Stvara konstrukcije od nule ili od odabranog objekta (skica, žica, površina ili tijelo) @@ -6034,150 +6029,150 @@ Stvaranje zgrade prekinuto. App::Property - - + + An optional extrusion path for this element Opcionalni put istiskivanje (extrusion) za ovaj element - + The computed length of the extrusion path Izračunana duljina puta istiskivanja - + Start offset distance along the extrusion path (positive: extend, negative: trim) Početni pomak duž puta istiskivanja (pozitivan: produži, negativan: skrati) - + End offset distance along the extrusion path (positive: extend, negative: trim) Udaljenost krajnjeg pomaka duž puta istiskivanja (pozitivno: produži, negativno: skrati) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatski poravnajte osnovu konstrukcije okomito na os alata - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X pomak između ishodišta osnove i osi alata (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y pomak između ishodišta osnove i osi alata (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Zrcali osnovu duž njene Y osi (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotacija osnove oko osi alata (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + The length of this element, if not based on a profile Dužina ovog elementa, ako se ne temelji na profilu - + The width of this element, if not based on a profile Širina ovog elementa, ako se ne temelji na profilu - + The height or extrusion depth of this element. Keep 0 for automatic Visine ili dubina istiskivanja ovog elementa. Držite 0 za automatsko - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Smjer normalnog istiskivanja objekta (zadrži (0,0,0) za automatsko normalno) - + The structural nodes of this element Strukturni čvorovi ovog elementa - + A description of the standard profile this element is based upon Opis standardnog profila ovog elementa temelji se na - + Offset distance between the centerline and the nodes line Udaljenost od centralne linije i čvora - + The facemaker type to use to build the profile of this object Vrsta dotjeravanja izgleda, koristi se za izgradnju profila ovog objekta - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Odabrani rubovi (ili grupa rubova) osnovnog ArchSketch-a za korištenje u stvaranju oblika ove BIM strukture (umjesto korištenja svih rubova osnovnog oblika prema zadanim postavkama). Unos su indeksni brojevi rubova ili grupa. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Da li su čvorovi vidljivi ili nisu - + The width of the nodes line Širina linije čvorova - + The size of the node points Veličina točke čvora - + The color of the nodes line Boja linije čvorova - + The type of structural node Vrsta strukturnog čvora - + Axes systems this structure is built on Sustavi osi na kojima se gradi ova struktura - + The element numbers to exclude when this structure is based on axes Broj elementa koje treba isključiti kada se ova konstrukcija temelji na osima - + If true the element are aligned with axes Ako je "istina", element je poravnat sa osi @@ -6482,6 +6477,42 @@ Stvaranje zgrade prekinuto. Thickness of the legs Debljina krakova + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6935,7 +6966,7 @@ Stvaranje zgrade prekinuto. Pokažite simbole visine otvaranja ako su dostupni - + The number of the wire that defines the hole. A value of 0 means automatic Broj profila koji definiraju otvore. Vrijednost 0 je podrazumijevana @@ -7192,7 +7223,7 @@ Stvaranje zgrade prekinuto. - + The overlap of the stringers above the bottom of the treads Preklapanje nosača stepenika iznad dna profila @@ -8339,7 +8370,7 @@ Stvaranje zgrade prekinuto. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Koristite podatke Base ArchSketch (ako se koriste) (npr. širine, poravnanja, odmaci) umjesto svojstava zida @@ -8348,12 +8379,12 @@ Stvaranje zgrade prekinuto. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Alati Konstrukcije diff --git a/src/Mod/BIM/Resources/translations/Arch_hu.qm b/src/Mod/BIM/Resources/translations/Arch_hu.qm index 40b28f8a4b..e190fce587 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_hu.qm and b/src/Mod/BIM/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_hu.ts b/src/Mod/BIM/Resources/translations/Arch_hu.ts index dd1c66ca58..ccda6f8730 100644 --- a/src/Mod/BIM/Resources/translations/Arch_hu.ts +++ b/src/Mod/BIM/Resources/translations/Arch_hu.ts @@ -469,7 +469,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Delete Selected Property/Property Set - Delete Selected Property/Property Set + Kiválasztott tulajdonság/tulajdonság készlet törlése @@ -558,7 +558,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Prevents further prompts when creating new FreeCAD documents. New documents will not be converted to IFC automatically, but conversion remains possible later via Utils → Create IFC Project. - Prevents further prompts when creating new FreeCAD documents. New documents will not be converted to IFC automatically, but conversion remains possible later via Utils → Create IFC Project. + Megakadályozza a további felszólításokat új FreeCAD dokumentumok létrehozásakor. Az új dokumentumok automatikusan nem lesznek IFC-vé konvertálva, de a konverzió később lehetséges ezzel: Eszközök → IFC terv készítése. @@ -669,7 +669,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Preloads IFC types that are connected to the objects. It is also possible to leave this setting disabled and double click later on the object to load the types. - Preloads IFC types that are connected to the objects. It is also possible to leave this setting disabled and double click later on the object to load the types. + Előzetesen betöltheti az objektumokhoz kapcsolódó IFC típusokat. Ezt a beállítást letilthatja, és később dupla kattintással betöltheti a típusokat az objektumra. @@ -689,7 +689,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Defines how IFC data is stored in the FreeCAD document. 'Single IFC document' treats the FreeCAD document itself as the IFC document, with all created content belonging to it. 'Use IFC document object' creates a separate object representing the IFC document, allowing both IFC and non-IFC content to coexist. - Defines how IFC data is stored in the FreeCAD document. 'Single IFC document' treats the FreeCAD document itself as the IFC document, with all created content belonging to it. 'Use IFC document object' creates a separate object representing the IFC document, allowing both IFC and non-IFC content to coexist. + Meghatározza, hogyan tárolják az IFC adatokat a FreeCAD dokumentumban. Az 'Egyetlen IFC dokumentum' a FreeCAD dokumentumot tekinti magának az IFC dokumentumnak, amelyhez minden létrehozott tartalom tartozik. A 'Használj IFC dokumentum objektumot' egy külön objektumot hoz létre, amely az IFC dokumentumot képviseli, lehetővé téve ezzel mind az IFC, mind a nem-IFC tartalom együttélését. @@ -751,7 +751,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Toggle Visibility - Toggle Visibility + Láthatóság kapcsolása @@ -1074,7 +1074,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér This dialog assists in creating and configuring a new BIM project in FreeCAD - This dialog assists in creating and configuring a new BIM project in FreeCAD + Ez a képernyő segít egy új BIM terv létrehozásában és konfigurálásában a FreeCAD-ben @@ -1355,27 +1355,27 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér FreeCAD is a complex application. For those new to FreeCAD, or without prior experience in 3D modelling or BIM, it is recommended to begin with the <a href="https://wiki.freecad.org/BIM_ingame_tutorial">BIM tutorial</a>. This can also be accessed under menu <span style=" font-weight:600;">Help -&gt; BIM Tutorial</span>. - FreeCAD is a complex application. For those new to FreeCAD, or without prior experience in 3D modelling or BIM, it is recommended to begin with the <a href="https://wiki.freecad.org/BIM_ingame_tutorial">BIM tutorial</a>. This can also be accessed under menu <span style=" font-weight:600;">Help -&gt; BIM Tutorial</span>. + A FreeCAD egy összetett alkalmazás. Azok számára, akik újonnan ismerkednek a FreeCAD-dal, vagy akiknek nincs előzetes tapasztalata a 3D modellezésben vagy a BIM-ben, ajánlott a <a href="https://wiki.freecad.org/BIM_ingame_tutorial">BIM oktatóanyag</a> a kezdéshez. Ez a <span style=" font-weight:600;">Súgó -&gt; BIM oktatóanyag</span> menü alatt is elérhető. The BIM workbench also has a <a href="https://wiki.freecad.org/BIM_Workbench">complete documentation</a> available under the Help menu. The "What's This?" button will open the help page of any tool from the toolbars. - The BIM workbench also has a <a href="https://wiki.freecad.org/BIM_Workbench">complete documentation</a> available under the Help menu. The "What's This?" button will open the help page of any tool from the toolbars. + A BIM munkafelület <a href="https://wiki.freecad.org/BIM_Workbench">teljes dokumentáció</a> is elérhető a Súgó menüben. A "Mi ez?" gombbal az eszköztárak bármelyik eszközének súgóoldala is megnyitható. A good way to start building a BIM model is by setting up basic characteristics of the project, under menu <span style=" font-weight:600;">Manage -&gt; Project setup</span>. Different floor plans for the project can be configured via <span style=" font-weight:600;">Manage -&gt; Levels.</span> - A good way to start building a BIM model is by setting up basic characteristics of the project, under menu <span style=" font-weight:600;">Manage -&gt; Project setup</span>. Different floor plans for the project can be configured via <span style=" font-weight:600;">Manage -&gt; Levels.</span> + A BIM-modell építését a terv alapvető jellemzőinek beállításával kezdheti el a <span style=" font-weight:600;">Kezelés -&gt; Terv beállítása</span> menüpont alatt. A különböző alaprajzokat közvetlenül is beállíthatja a projektjéhez, a következő menüpont alatt<span style=" font-weight:600;">Kezelés -&gt; Szintek.</span> There is no required workflow; walls and columns can be created directly, with levels organised later if preferred. - There is no required workflow; walls and columns can be created directly, with levels organised later if preferred. + Nincs kötelező munkafolyamat; a falak és oszlopok közvetlenül létrehozhatók, és a szintek később szervezhetők, ha úgy tetszik. <html><head/><body><p>An existing floor plan or 3D model created in another application can also be used as a starting point. Under menu <span style=" font-weight:600;">File -&gt; Import</span>, a wide range of file formats that can be imported into FreeCAD.</p></body></html> - <html><head/><body><p>An existing floor plan or 3D model created in another application can also be used as a starting point. Under menu <span style=" font-weight:600;">File -&gt; Import</span>, a wide range of file formats that can be imported into FreeCAD.</p></body></html> + <html><head/><body><p>Egy meglévő alaprajz vagy egy másik alkalmazásban létrehozott 3D modell is használható kiindulópontként. A menü <span style=" font-weight:600;">Fájl -&gt; Import</span> menüpontjában a FreeCAD-be importálható fájlformátumok széles választéka áll rendelkezésre.</p></body></html> @@ -1385,7 +1385,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Convert to IFC Type - Convert to IFC Type + Konvertálás IFC-típusra @@ -1400,12 +1400,12 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Do not ask again and use this setting - Do not ask again and use this setting + Ne kérdezze újra, és használja ezt a beállítást Add IFC Property - Add IFC Property + IFC tulajdonság hozzáadása @@ -1450,43 +1450,43 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Default Structure - Default Structure + Alapértelmezett felépítés Create a default structure (IfcProject, IfcSite, IfcBuilding and IfcBuildingStorey)? Replying "No" will only create an IfcProject. The structure can be added manually later. - Create a default structure (IfcProject, IfcSite, IfcBuilding and IfcBuildingStorey)? Replying "No" will only create an IfcProject. The structure can be added manually later. + Alapértelmezett szerkezet létrehozása (IfcProject, IfcSite, IfcBuilding és IfcBuildingStorey)? A "Nem" válasz csak egy IfcProjectet hoz létre. A szerkezet később manuálisan adható hozzá. One or more IFC documents contained in this FreeCAD document have been modified, but were not saved. They will automatically be saved now. - One or more IFC documents contained in this FreeCAD document have been modified, but were not saved. They will automatically be saved now. + A FreeCAD dokumentumban található egy vagy több IFC dokumentumot módosították, de nem mentették el. Most automatikusan elmentésre kerülnek. Ask again next time - Ask again next time + Kérdezz meg legközelebb is Choose a Material - Choose a Material + Válassz egy anyagot Test Results - Test Results + Teszt eredmények Results of test - Results of test + Teszt eredmények To Report Panel - To Report Panel + A jelentés panelhez @@ -1519,7 +1519,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér List of files to be committed - List of files to be committed + Közzétett fájlok listája @@ -1560,7 +1560,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Multi-Material Definition - Multi-Material Definition + Több anyagra vonatkozó meghatározás @@ -1570,7 +1570,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Composition - Composition + Összetétel @@ -1646,17 +1646,17 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Pick Selected - Pick Selected + Véletlenszerűen kiválasztott Add Selected - Add Selected + Kijelöltek hozzáadása The number of segments to divide non-linear edges into for calculations. If curved shapes overlap, try raising this value - The number of segments to divide non-linear edges into for calculations. If curved shapes overlap, try raising this value + A szegmensek száma, amelyekre a nem lineáris éleket a számításokhoz fel kell osztani. Ha az íves alakzatok átfedik egymást, próbálja meg növelni ezt az értéket @@ -1697,7 +1697,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Class Manager - Class Manager + Osztály kezelő @@ -1731,17 +1731,17 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Custom Properties - Custom Properties + Egyéni tulajdonságok A description of this property. Supports any language. - A description of this property. Supports any language. + Az ingatlan leírása. Bármilyen nyelven lehet. The property will be hidden in the interface, and can only be modified via Python scripting - The property will be hidden in the interface, and can only be modified via Python scripting + A tulajdonság el lesz rejtve a felületen, és csak Python szkripttel módosítható @@ -1811,12 +1811,12 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Library Browser - Library Browser + Könyvtár böngésző Links the selected object in the current document. Only works in offline mode. - Links the selected object in the current document. Only works in offline mode. + Összekapcsolja a kijelölt objektumokat az aktuális dokumentumban. Csak offline módban működik. @@ -1826,22 +1826,22 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér … - … + … Allows the library to be fetched online instead of requiring local installation. - Allows the library to be fetched online instead of requiring local installation. + Lehetővé teszi a könyvtár online lehívását ahelyett, hogy helyi telepítésre lenne szükség. Search using FreeCAD's web view - Search using FreeCAD's web view + Keresés a FreeCAD webes nézetének használatával Opens a 3D preview of the selected file - Opens a 3D preview of the selected file + Megnyitja a kiválasztott fájl 3D előnézetét @@ -1871,7 +1871,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér Save As… - Save As… + Mentés másként… @@ -1981,7 +1981,7 @@ Az IFC-terv nevének használatával a terv összes IFC-entitásához hozzáfér <html><head/><body><p>The following test will check the model or the selected object(s) and their children for conformity to IFC standards.</p><p><span style=" font-weight:600;">Important</span>: None of the failed tests below will prevent exporting IFC files, nor do these tests guarantee that the IFC files meets some specific quality or standard requirement. They are there to assess which elements are included or excluded from the exported file. Choose which item is of importance manually. Hovering the mouse over each description will show more information.</p><p>After a test is run, clicking the corresponding button will show more information to help fix the problems.</p><p>The <a href="http://www.buildingsmart-tech.org/specifications"><span style=" text-decoration: underline; color:#0000ff;">official IFC website</span></a> contains a lot of useful information about IFC standards.</p></body></html> - <html><head/><body><p>The following test will check the model or the selected object(s) and their children for conformity to IFC standards.</p><p><span style=" font-weight:600;">Important</span>: None of the failed tests below will prevent exporting IFC files, nor do these tests guarantee that the IFC files meets some specific quality or standard requirement. They are there to assess which elements are included or excluded from the exported file. Choose which item is of importance manually. Hovering the mouse over each description will show more information.</p><p>After a test is run, clicking the corresponding button will show more information to help fix the problems.</p><p>The <a href="http://www.buildingsmart-tech.org/specifications"><span style=" text-decoration: underline; color:#0000ff;">official IFC website</span></a> contains a lot of useful information about IFC standards.</p></body></html> + <html><head/><body><p>A következő teszt a modellt vagy a kiválasztott objektum(ok)at és azok alatti objektumait ellenőrzi az IFC-szabványoknak való megfelelés szempontjából.</p><p><span style=" font-weight:600;">Fontos</span>: Az alábbi tesztek egyike sem akadályozza meg az IFC-fájlok exportálását, és ezek a tesztek nem garantálják, hogy az IFC-fájlok megfelelnek bizonyos minőségi vagy szabványos követelményeknek. Feladatuk annak értékelése, hogy mely elemek szerepelnek vagy nem szerepelnek az exportált fájlban. Válassza ki manuálisan, hogy melyik elem fontos. Ha egérrel az egyes leírások fölé mozgatja az egérmutatót, további információk jelennek meg.</p><p>A teszt lefutása után a megfelelő gombra kattintva további információk jelennek meg, amelyek segíthetnek a problémák megoldásában.</p><p>A <a href="http://www.buildingsmart-tech.org/specifications"><span style=" text-decoration: underline; color:#0000ff;">hivatalos IFC weboldal</span></a> sok hasznos információt tartalmaz az IFC szabványokról.</p></body></html> @@ -3766,72 +3766,67 @@ The default template is located at: Arch - Structure - Felépítés - - - - + Beam Gerenda - - + + Column Oszlop - + StructuralSystem Szerkezeti rendszer - + Create Structures From Selection Struktúrák létrehozása kijelölt elemekből - + Create Structural System Szerkezeti rendszer létrehozása - - + + Create Structure Struktúra létrehozása - + First point of the beam Gerenda első pontja - + Base point of column Oszlop alappontja - + Next point Következő pont - + Structure options Szerkezeti lehetőségek - + Category Kategória - + @@ -3841,7 +3836,7 @@ The default template is located at: - + Length @@ -3849,7 +3844,7 @@ The default template is located at: - + Width @@ -3858,158 +3853,158 @@ The default template is located at: - + Height Magasság - + Parameters of the structure A szerkezet paraméterei - + Switch Length/Height Hossz/Magasság cseréje - + Switch Length/Width Hosszúság és szélesség cseréje - - + + This mesh is an invalid solid Ez a háló egy érvénytelen szilárd test - + Facemaker returned an error Felületlétrehozás hibával tért vissza - + Node Tools Csomópont eszközök - + Extends the nodes of this element to reach the nodes of another element Kiterjeszti ennek az elemnek a csomópontjait, hogy egy másik elem csomópontjait elérje - + Connects nodes of this element with the nodes of another element Csatlakoztatja ennek az elemnek a csomópontjait egy másik elem csomópontjaival - + Toggles all structural nodes of the document on/off A dokumentum összes szerkezeti csomópontjának átkapcsolása - + Extrusion Tools Kihúzás eszközök - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Válasszon ki egy másik szerkezeti objektumot: - - + + The chosen object is not a Structure A kiválasztott tárgy nem szerkezet - - + + The chosen object has no structural nodes A kiválasztott objektumnak nincsenek szerkezeti csomópontjai - - + + One of these objects has more than 2 nodes Egy ezek közül az objektumok közül több mint 2 csomóponttal rendelkezik - - + + Unable to find a suitable intersection point Nem képes találni egy megfelelő metszéspontot - + Intersection found. Metszéspontot talált. - + Intersection found. Metszéspontot talált. - + Done Kész @@ -4054,12 +4049,12 @@ The default template is located at: Profil létrehozása - + Profile Szelvény - + Site Oldal @@ -4122,7 +4117,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Kérjük válassza ki a forrásobjektumot - + Roof Tető @@ -4193,7 +4188,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Elölnézet - + External Reference Külső hivatkozás @@ -4361,7 +4356,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Az alakzatfájltár a következő URL-címről tölthető le, és a makrók mappájába telepíthető: - + Window Ablak @@ -4408,75 +4403,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Könyöklő magassága - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Ennek az ablakban nincs meghatározva a nyitása - - + + Get selected edge Kiválasztott élt kapja - + Unable to create component Nem sikerült létrehozni egy összetevőt - + Window elements Ablak elemek - + Hole wire Drótháló furat - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire A kiszolgáló objektumon lévő furat meghatározásához használt drótháló száma. A nulla értékkel automatikusan a legnagyobb dróthálót fogadja el - + Pick Selected - Pick Selected + Véletlenszerűen kiválasztott - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4486,7 +4481,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Törlés @@ -4495,7 +4490,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Hozzáad @@ -4511,38 +4506,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Szerkesztés - + Base 2D object 2D forrásobjektum - - + + Wires Drótvázak - + Components Összetevők - + Name Név - + Type Típus @@ -4557,38 +4552,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Eltolás - + Hinge Zsanér - + Opening mode Nyitás módja - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Nyomja meg a kiválasztott él lekéréséhez @@ -4634,7 +4629,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sikeresen kiírva - + Truss Kereszttartó @@ -4689,17 +4684,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Terv - + Stairs Lépcsők - + Railing Korlátok @@ -4709,12 +4704,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Lépcső létrehozás - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' eltávolította a 'OutlineWireLeft' és 'OutlineWireRight' tulajdonságokat, és hozzáadta a 'RailingLeft' és 'RailingRight' tulajdonságokat - + changed the type of properties 'RailingLeft' and 'RailingRight' megváltoztatta a 'RailingLeft' és 'RailingRight' tulajdonságok típusát @@ -5026,7 +5021,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5247,7 +5242,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Egység - + Schedule Ütemezés @@ -5488,7 +5483,7 @@ Szint létrehozása megszakítva. Új tulajdonságkészlet - + Rebar Újrahálózás @@ -5504,7 +5499,7 @@ Szint létrehozása megszakítva. Select a base face on a structural object - + Section Szakasz @@ -5638,7 +5633,7 @@ Building creation aborted. Épület létrehozás - + Space Térköz @@ -5658,12 +5653,12 @@ Building creation aborted. Terület határvonalak - + Wall Fal - + Walls can only be based on Part or Mesh objects Falat csak az Alkotórész vagy Háló objektumhoz húzhat @@ -5722,22 +5717,22 @@ Hozzon létre többet a faltípusok meghatározásához. Falak egyesítése - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction a 'Normal' értéket [0, 0, 1]-re változtattam, hogy megmaradjon a kihúzás iránya - + Cannot compute blocks for wall Képtelen blokkokat számolni a falhoz - + Error: Unable to modify the base object of this wall Hiba: Nem lehet módosítani ennek a falnak a forrásobjektumát - + Flip Direction Flip Direction @@ -5954,12 +5949,12 @@ Hozzon létre többet a faltípusok meghatározásához. Arch_StructuresFromSelection - + Multiple Structures Több szerkezet - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5967,12 +5962,12 @@ Hozzon létre többet a faltípusok meghatározásához. Arch_StructuralSystem - + Structural System Szerkezeti rendszer - + Create a structural system from a selected structure and axis Szerkezeti rendszer létrehozása kijelölt szerkezetekből és tengelyekből @@ -5980,12 +5975,12 @@ Hozzon létre többet a faltípusok meghatározásához. Arch_Structure - + Structure Felépítés - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Létrehoz egy felépítést skiccből vagy egy kijelölt objeltumból (vázlat, vonal, felület vagy szilárd test) @@ -5993,146 +5988,146 @@ Hozzon létre többet a faltípusok meghatározásához. App::Property - - + + An optional extrusion path for this element Egy választható kihúzási útvonalat ehhez az elemhez - + The computed length of the extrusion path A kihúzási útvonal számított hossza - + Start offset distance along the extrusion path (positive: extend, negative: trim) Kezdeti eltolási távolság a kihúzási útvonal mentén (pozitív: kiterjesztés, negatív: vágás) - + End offset distance along the extrusion path (positive: extend, negative: trim) Végponti eltolási távolság a kihúzás útvonal mentén (pozitív: hosszabbítás, negatív: vágás) - + Automatically align the Base of the Structure perpendicular to the Tool axis A szerszámtengelyre merőleges szerkezetalap automatikus igazítása - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X eltolás az alappont és a szerszámtengely között (csak akkor használható, ha a BasePerpendicularTool igaz) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y eltolás az alap eredete és a szerszámtengely között (csak akkor használható, ha a BasePerpendicularTool igaz) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Tükrözze az alap mentén az Y tengely (csak akkor használják, ha BasePerpendicularTool igaz) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Alap forgás a szerszámtengely körül (csak akkor használható, ha a BasePerpendicularTool igaz) - + The length of this element, if not based on a profile Ennek az elemnek a hossza, ha nem profilon áll - + The width of this element, if not based on a profile Ennek az elemnek a szélessége, ha nem profilon áll - + The height or extrusion depth of this element. Keep 0 for automatic Ez az elem magassága vagy kihúzás nagysága. 0 megtartása automatikushoz - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ennek az objektumnak az aktuális kihúzás iránya (automatikus (0,0,0) aktuális megtartása) - + The structural nodes of this element Ennek az elemnek a szerkezeti csomópontjai - + A description of the standard profile this element is based upon A szokásos profil leírása amin ez az elem alapszik - + Offset distance between the centerline and the nodes line A középtengely és az egyenes csomópontok közti eltolás - + The facemaker type to use to build the profile of this object Ennek az ibjektumnak a felület szelvényéhez használt felületlétrehozó típus - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Az alap Építészeti vázlat élei (vagy élcsoportja) vannak kiválasztva, amelyeket az adott BIM alakjának létrehozásához használni kell (ahelyett, hogy alapértelmezés szerint az alapforma összes élét használná). Az értékek az él- vagy csoportindexszámokként vannak megadva. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Válassza ki a felhasználói definiált tulajdonságkészletet, amelyet a variáns alakzat létrehozásához használ, ugyanazzal az ÉpítészetVázlattal - + If the nodes are visible or not Ha látja vagy nem látja a csomópontokat - + The width of the nodes line A csomópont egyenes vastagsága - + The size of the node points A csomópont pontok mérete - + The color of the nodes line A csomópont vonal színe - + The type of structural node Szerkezeti csomópont típusa - + Axes systems this structure is built on A tengelyrendszerek, amelyekre ez a szerkezet épül - + The element numbers to exclude when this structure is based on axes A kihúzandó elemek száma, ha az tengelyeken alapul - + If true the element are aligned with axes Ha igaz, akkor az elem tengelyekkel igazodik @@ -6432,6 +6427,42 @@ Hozzon létre többet a faltípusok meghatározásához. Thickness of the legs A tartók vastagsága + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6869,7 +6900,7 @@ Hozzon létre többet a faltípusok meghatározásához. Kijelzi a magassági nyitó szintek szimbólumait, ha rendelkezésre állnak - + The number of the wire that defines the hole. A value of 0 means automatic A furatokat meghatározó dróthálók száma. A 0 érték azt jelenti, hogy automatikus @@ -7126,7 +7157,7 @@ Hozzon létre többet a faltípusok meghatározásához. - + The overlap of the stringers above the bottom of the treads Az átfedés a futófelület aljától a tartógerendák tetejéig @@ -8264,7 +8295,7 @@ Hozzon létre többet a faltípusok meghatározásához. Válassza ki a Felhasználó által meghatározott tulajdonságkészleteket, amelyeket az ÉpítészetVázlattal azonos ÉpítészetVázlat formavariánsok, rétegek létrehozásához kell használni - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Az alap ArchSketch (ha használják) adatainak (pl. szélességek, igazítások, eltolások) használata a fal tulajdonságai helyett @@ -8273,12 +8304,12 @@ Hozzon létre többet a faltípusok meghatározásához. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Szerkezeti eszközök diff --git a/src/Mod/BIM/Resources/translations/Arch_it.qm b/src/Mod/BIM/Resources/translations/Arch_it.qm index 766433db4e..b1c3640741 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_it.qm and b/src/Mod/BIM/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_it.ts b/src/Mod/BIM/Resources/translations/Arch_it.ts index 177d179266..2617df7dc7 100644 --- a/src/Mod/BIM/Resources/translations/Arch_it.ts +++ b/src/Mod/BIM/Resources/translations/Arch_it.ts @@ -3768,72 +3768,67 @@ The default template is located at: Arch - Structure - Struttura - - - - + Beam Trave - - + + Column Colonna - + StructuralSystem Sistema strutturale - + Create Structures From Selection Crea una struttura dalla selezione - + Create Structural System Crea un sistema strutturale - - + + Create Structure Crea una nuova struttura - + First point of the beam Primo punto della linea - + Base point of column Punto di base della colonna - + Next point Punto successivo - + Structure options Opzioni della struttura - + Category Categoria - + @@ -3843,7 +3838,7 @@ The default template is located at: - + Length @@ -3851,7 +3846,7 @@ The default template is located at: - + Width @@ -3860,158 +3855,158 @@ The default template is located at: - + Height Altezza - + Parameters of the structure Parametri della struttura - + Switch Length/Height Inverti Lunghezza/Altezza - + Switch Length/Width Inverti Lunghezza/Larghezza - - + + This mesh is an invalid solid Questa mesh non è un solido valido - + Facemaker returned an error FaceMaker ha restituito un errore - + Node Tools Strumenti nodo - + Extends the nodes of this element to reach the nodes of another element Estendi i nodi di questo elemento per raggiungere i nodi di un altro elemento - + Connects nodes of this element with the nodes of another element Collega i nodi di questo elemento con i nodi di un altro elemento - + Toggles all structural nodes of the document on/off Attiva o disattiva tutti i nodi strutturali del documento - + Extrusion Tools Strumenti di estrusione - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Scegliere un altro oggetto struttura: - - + + The chosen object is not a Structure L'oggetto selezionato non è una struttura - - + + The chosen object has no structural nodes L'oggetto scelto non ha nodi strutturali - - + + One of these objects has more than 2 nodes Uno di questi oggetti possiede più di 2 nodi - - + + Unable to find a suitable intersection point Impossibile trovare un punto d'intersezione adatto - + Intersection found. Intersezione trovata. - + Intersection found. Intersezione trovata. - + Done Fatto @@ -4056,12 +4051,12 @@ The default template is located at: Crea un Profilo - + Profile Profilo - + Site Sito @@ -4124,7 +4119,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Selezionare un oggetto base - + Roof Tetto @@ -4195,7 +4190,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Di fronte - + External Reference Riferimento esterno @@ -4363,7 +4358,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela La libreria shapefile può essere scaricata dal seguente URL e installata nella cartella delle macro: - + Window Finestra @@ -4410,75 +4405,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Altezza soglia - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Questa finestra non ha alcuna apertura definita - - + + Get selected edge Ottieni il bordo selezionato - + Unable to create component Impossibile creare il componente - + Window elements Elementi della finestra - + Hole wire Contorno del foro - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Il numero del contorno che definisce un foro nell'oggetto ospite. Il valore zero adotta automaticamente il contorno più grande - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4488,7 +4483,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Rimuovi @@ -4497,7 +4492,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Aggiungi @@ -4513,38 +4508,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Modifica - + Base 2D object Oggetto 2D di base - - + + Wires Polilinee - + Components Componenti - + Name Nome - + Type Tipo @@ -4559,38 +4554,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Offset - + Hinge Cerniera - + Opening mode Modalità di apertura - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Premere per recuperare il bordo selezionato @@ -4636,7 +4631,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Scritto correttamente - + Truss Travatura @@ -4691,17 +4686,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Progetto - + Stairs Scale - + Railing Ringhiera @@ -4711,12 +4706,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Crea scale - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' rimosse le proprietà 'OutlineWireLeft' e 'OutlineWireRight', e aggiunte le proprietà 'RailingLeft' e 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' cambiato il tipo di proprietà 'RailingLeft' e 'RailingRight' @@ -5028,7 +5023,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5249,7 +5244,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unità - + Schedule Pianificazione @@ -5490,7 +5485,7 @@ Creazione del Piano interrotta. Nuovo set di proprietà - + Rebar Armatura @@ -5506,7 +5501,7 @@ Creazione del Piano interrotta. Select a base face on a structural object - + Section Seziona @@ -5640,7 +5635,7 @@ Creazione Edificio interrotta. Crea Edificio - + Space Spazio @@ -5660,12 +5655,12 @@ Creazione Edificio interrotta. Confini dello Spazio - + Wall Muro - + Walls can only be based on Part or Mesh objects I Muri possono essere basati solo su oggetti Parte o Mesh @@ -5723,22 +5718,22 @@ Creazione Edificio interrotta. Unisci Muri - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction cambiato 'Normale' in [0, 0, 1] per mantenere la direzione di estrusione - + Cannot compute blocks for wall Non è possibile calcolare i blocchi per il muro - + Error: Unable to modify the base object of this wall Errore: impossibile modificare l'oggetto base di questo muro - + Flip Direction Flip Direction @@ -5955,12 +5950,12 @@ Creazione Edificio interrotta. Arch_StructuresFromSelection - + Multiple Structures Strutture Multiple - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5968,12 +5963,12 @@ Creazione Edificio interrotta. Arch_StructuralSystem - + Structural System Sistema Strutturale - + Create a structural system from a selected structure and axis Crea un sistema strutturale da una struttura e un asse selezionati @@ -5981,12 +5976,12 @@ Creazione Edificio interrotta. Arch_Structure - + Structure Struttura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Crea un oggetto struttura da zero o da un oggetto selezionato (schizzo, filo, faccia o solido) @@ -5994,146 +5989,146 @@ Creazione Edificio interrotta. App::Property - - + + An optional extrusion path for this element Un tracciato di estrusione opzionale per questo elemento - + The computed length of the extrusion path La lunghezza calcolata del percorso di estrusione - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distanza di spostamento iniziale lungo il percorso di estrusione (positiva: estende, negativa: taglia) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distanza di spostamento finale lungo il percorso di estrusione (positiva: estensione, negativa: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Allinea automaticamente la Base della Struttura perpendicolare all'asse dello Strumento - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Spostamento X tra l'origine della Base e l'asse dello Strumento (usato solo se BasePerpendicularToTool è Vero) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Spostamento Y tra l'origine della Base e l'asse dello Strumento (usato solo se BasePerpendicularToTool è Vero) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Specchia la base lungo il suo asse Y (usato solo se BasePerpendicularToTool è Vero) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotazione della Base attorno all'asse dello Strumento (usata solo se BasePerpendicularToTool è Vero) - + The length of this element, if not based on a profile La lunghezza di questo elemento, se non è basato su un profilo - + The width of this element, if not based on a profile La larghezza di questo elemento, se non è basato su un profilo - + The height or extrusion depth of this element. Keep 0 for automatic L'altezza o la profondità di estrusione di questo elemento. Lasciare 0 per automatico - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The structural nodes of this element I nodi strutturali di questo elemento - + A description of the standard profile this element is based upon Una descrizione del profilo standard su cui è basato questo elemento - + Offset distance between the centerline and the nodes line Distanza di offset tra la linea centrale e la linea dei nodi - + The facemaker type to use to build the profile of this object Il tipo di Crea facce da utilizzare per creare il profilo di questo oggetto - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Se i nodi sono visibili o no - + The width of the nodes line La larghezza della linea dei nodi - + The size of the node points La dimensione dei punti nodo - + The color of the nodes line Il colore della linea dei nodi - + The type of structural node Il tipo di nodo strutturale - + Axes systems this structure is built on Sistemi assi su cui questa struttura è costruita - + The element numbers to exclude when this structure is based on axes I numeri degli elementi da escludere quando questa struttura è basata su assi - + If true the element are aligned with axes Se vero l'elemento è allineato con gli assi @@ -6433,6 +6428,42 @@ Creazione Edificio interrotta. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6870,7 +6901,7 @@ Creazione Edificio interrotta. Mostra i simboli di apertura di elevazione se possibile - + The number of the wire that defines the hole. A value of 0 means automatic Il numero della polilinea che definisce il foro. Un valore di 0 significa automatico @@ -7127,7 +7158,7 @@ Creazione Edificio interrotta. - + The overlap of the stringers above the bottom of the treads La sovrapposizione dei traversi nella parte inferiore dei gradini @@ -8265,7 +8296,7 @@ Creazione Edificio interrotta. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Usa i dati Base di ArchSketch (se utilizzati) (es. larghezze, allineamenti, offset) invece delle proprietà di Muro @@ -8274,12 +8305,12 @@ Creazione Edificio interrotta. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Strumenti di Struttura diff --git a/src/Mod/BIM/Resources/translations/Arch_ja.qm b/src/Mod/BIM/Resources/translations/Arch_ja.qm index 7f1ed91597..cc40cb3aa9 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ja.qm and b/src/Mod/BIM/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ja.ts b/src/Mod/BIM/Resources/translations/Arch_ja.ts index 8b262385d3..738c4d1cf4 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ja.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ja.ts @@ -3768,72 +3768,67 @@ The default template is located at: Arch - Structure - 構造体 - - - - + Beam 母屋 - - + + Column Column - + StructuralSystem StructuralSystem - + Create Structures From Selection Create Structures From Selection - + Create Structural System Create Structural System - - + + Create Structure Create Structure - + First point of the beam First point of the beam - + Base point of column Base point of column - + Next point Next point - + Structure options Structure options - + Category カテゴリ - + @@ -3843,7 +3838,7 @@ The default template is located at: - + Length @@ -3851,7 +3846,7 @@ The default template is located at: - + Width @@ -3860,158 +3855,158 @@ The default template is located at: - + Height 高さ - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error - + Node Tools Node Tools - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choose another Structure object: - - + + The chosen object is not a Structure The chosen object is not a Structure - - + + The chosen object has no structural nodes The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + Intersection found. Intersection found. - + Done 終了 @@ -4056,12 +4051,12 @@ The default template is located at: プロファイルを作成 - + Profile プロファイル - + Site サイト @@ -4124,7 +4119,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Roof @@ -4195,7 +4190,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 前面 - + External Reference External Reference @@ -4363,7 +4358,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window ウィンドウ @@ -4410,75 +4405,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4488,7 +4483,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove 削除 @@ -4497,7 +4492,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 追加 @@ -4513,38 +4508,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 編集 - + Base 2D object Base 2D object - - + + Wires Wires - + Components コンポーネント - + Name 名前 - + Type タイプ @@ -4559,38 +4554,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset オフセット - + Hinge ヒンジ - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4636,7 +4631,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Truss @@ -4691,17 +4686,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project プロジェクト - + Stairs 階段 - + Railing Railing @@ -4711,12 +4706,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Stairs - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5028,7 +5023,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5249,7 +5244,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 単位 - + Schedule Schedule @@ -5490,7 +5485,7 @@ Floor creation aborted. New property set - + Rebar 鉄筋 @@ -5506,7 +5501,7 @@ Floor creation aborted. Select a base face on a structural object - + Section セクション @@ -5640,7 +5635,7 @@ Building creation aborted. Create Building - + Space スペース @@ -5660,12 +5655,12 @@ Building creation aborted. Space boundaries - + Wall 壁 - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5723,22 +5718,22 @@ Building creation aborted. 壁を結合 - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction 押し出し方向を維持するために 'Normal' を [0, 0, 1] に変更しました - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5955,12 +5950,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Multiple Structures - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5968,12 +5963,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Structural System - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5981,12 +5976,12 @@ Building creation aborted. Arch_Structure - + Structure 構造体 - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -5994,146 +5989,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line 節間の線の色 - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6433,6 +6428,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6870,7 +6901,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7127,7 +7158,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8265,7 +8296,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8274,12 +8305,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_ka.qm b/src/Mod/BIM/Resources/translations/Arch_ka.qm index 6f38e400ae..cdb3ab5bc9 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ka.qm and b/src/Mod/BIM/Resources/translations/Arch_ka.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ka.ts b/src/Mod/BIM/Resources/translations/Arch_ka.ts index b5878b1f55..f762ece138 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ka.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ka.ts @@ -476,7 +476,7 @@ of that project, no matter if they are expanded or not. Delete Selected Property/Property Set - Delete Selected Property/Property Set + მონიშნული თვისების/თვისებების ნაკრების წაშლა @@ -1026,7 +1026,7 @@ of that project, no matter if they are expanded or not. An estimate building width. Keep the value as 0 to not specify this now. - An estimate building width. Keep the value as 0 to not specify this now. + შენობის დაახლოებითი სიგანე. დააყენეთ 0, თუ არ გნებავთ, ახლა მიუთითოთ. @@ -1041,7 +1041,7 @@ of that project, no matter if they are expanded or not. An estimate building length. Keep the value as 0 to not specify this now. - An estimate building length. Keep the value as 0 to not specify this now. + შენობის დაახლოებითი სიგრძე. დააყენეთ 0, თუ არ გნებავთ, ახლა მიუთითოთ. @@ -1081,7 +1081,7 @@ of that project, no matter if they are expanded or not. This dialog assists in creating and configuring a new BIM project in FreeCAD - This dialog assists in creating and configuring a new BIM project in FreeCAD + ეს დიალოგი გეხმარებათ FreeCAD-ში ახალი BIM პროექტის შექმნასა და მორგებაში @@ -1858,7 +1858,7 @@ of that project, no matter if they are expanded or not. Show available alternative file formats for library items (STEP, IFC, etc...) - Show available alternative file formats for library items (STEP, IFC, etc...) + ხელმისაწვდომი ალტერნატიული ფაილის ფორმატების ჩვენება ბიბლიოთეკის ელემენტებისთვის (STEP, IFC და ა. შ...) @@ -3178,7 +3178,7 @@ if crashes occur when multiple cores are set. Import structure IFC objects as - Import structure IFC objects as + IFC სტრუქტურული ობიექტის შემოტანა როგორც @@ -3388,7 +3388,7 @@ If using Netgen, make sure that it is available. Tessellation value to use with the Builtin and the Mefisto meshing program - Tessellation value to use with the Builtin and the Mefisto meshing program + ჩაშენებული და მეფისტო ბადის პროგრამის ტესელაციის მნიშვნელობა @@ -3767,72 +3767,67 @@ The default template is located at: Arch - Structure - სტრუქტურა - - - - + Beam ზურგი - - + + Column სვეტი - + StructuralSystem სტრუქუტურული სისტემა - + Create Structures From Selection მონიშნულისგან სტრუქტურის შექმნა - + Create Structural System სტრუქტურული სისტემის შექმნა - - + + Create Structure სტრუქტურის შექმნა - + First point of the beam კოჭის პირველი წერტილი - + Base point of column სვეტის საბაზისო წერტილი - + Next point შემდეგი წერტილი - + Structure options კონსტრუქციის მორგება - + Category კატეგორია - + @@ -3842,7 +3837,7 @@ The default template is located at: - + Length @@ -3850,7 +3845,7 @@ The default template is located at: - + Width @@ -3859,158 +3854,158 @@ The default template is located at: - + Height სიმაღლე - + Parameters of the structure სტრუქტურის პარამეტრები - + Switch Length/Height სიმაღლის/სიგანის მიმოცვლა - + Switch Length/Width სიგრძის/სიგანის მიმოცვლა - - + + This mesh is an invalid solid ეს პოლიხაზი არ წარმოადგენს შეკრულ სხეულს - + Facemaker returned an error Facemaker-მა დააბრუნა შეცდომა - + Node Tools კვანძის ხელსაწყოები - + Extends the nodes of this element to reach the nodes of another element სხვა ელემენტთან დასაკავშირებლად მიმდინარე ელემენტის კვანძების გაფართოება - + Connects nodes of this element with the nodes of another element მიმდინარე ელემენტის კვანძების სხვა ელემენტთან კავშირი - + Toggles all structural nodes of the document on/off ამ დოკუმენტის ყველა სტრუქტურული კვანძის ჩართ/გამორთ - + Extrusion Tools ექსტრუზიის ხელსაწყოები - + Select the base object first and then the edges to use as extrusion paths - Select the base object first and then the edges to use as extrusion paths + ჯერ აირჩიეთ საბაზისო ობიექტი, შემდეგ კი წიბოები მათი გამოწნევის ტრაექტორიებად გამოსაყენებლად - + Select at least an axis object აირჩიეთ, სულ ცოტა, ერთი ღერძის ობიექტი - + Error: The base shape could not be extruded along this tool object შეცდომა: საბაზისო მონახაზი ვერ გამოიწნევება ამ ხელსაწყოს ობიექტის გაწვრივ - + Reset Nodes კვანძების ჩამოყრა - + Edit Nodes კვანძების ჩასწორება - + Extend Nodes კვანძების დაგრძელება - + Connect Nodes კვანძების დაკავშირება - + Toggle All Nodes ყველა კვანძის გადართვა - - + + Select Tool აირჩიეთ ხელსაწყო - + Selects object or edges to be used as a tool (extrusion path) მონიშნავს ობიექტს ან წიბოებს მათი ხელსაწყოდ გამოსაყენებლად (გამოწნევის ტრაექტორია) - - + + Choose another Structure object: აირჩიეთ სხვა სტრუქტურული ობიექტი: - - + + The chosen object is not a Structure არჩეული ობიექტი სტრუქტურა არაა - - + + The chosen object has no structural nodes არჩეულ ობიექტს არ გააჩნია სტრუქტურული კვანძები - - + + One of these objects has more than 2 nodes ერთერთს ამ ობიექტებიდან ორზე მეტი კვანძი აქვს - - + + Unable to find a suitable intersection point გადაკვეთის შესაფერისი წერტილის პოვნა შეუძლებელია - + Intersection found. ნაპოვნია კვეთა. - + Intersection found. კვეთა ნაპოვნია. - + Done დასრულებულია @@ -4055,12 +4050,12 @@ The default template is located at: პროფილის შექმნა - + Profile პროფილი - + Site საიტი @@ -4123,7 +4118,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela გთხოვთ, აირჩიოთ საბაზისო ობიექტი - + Roof სახურავი @@ -4194,7 +4189,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela წინა - + External Reference გარე მიმართვა @@ -4362,7 +4357,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile ბიბლიოთეკის ჩამოტვირთვა შესაძლებელია შემდეგი URL-დან. დაინსტალირდება თქვენს მაკროების საქაღალდეში: - + Window ფანჯარა @@ -4409,75 +4404,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela რაფის სიმაღლე - - + + Invert Opening Direction - Invert Opening Direction + ღიობის მიმართულების შებრუნება - - + + Invert Hinge Position - Invert Hinge Position + ანჯამის მდებარეობის ინვერსია - + This window has no defined opening ამ ფანჯარას არ გააჩნია განსაზღვრული ღიობი - - + + Get selected edge მონიშნული წიბოს მიღება - + Unable to create component კომპონენტის შექმნა შეუძლებელია - + Window elements ფანჯრის ელემენტები - + Hole wire ნახვრეტის პოლიხაზი - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire პოლიხაზების რაოდენობა, რომელიც განსაზღვრავს ხვრელს მასპინძელ ობიექტში. ნულის მნიშვნელობა ავტომატურად მიიღებს ყველაზე დიდ პოლიხაზს - + Pick Selected მონიშნულის არჩევა - + Create/Update Component - Create/Update Component + კომპონენტის შექმნა/განახლება - + Create new Component - Create new Component + ახალი კომპონენტის შექმნა - + Frame depth ჩარჩოს სიღრმე - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4487,7 +4482,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove წაშლა @@ -4496,7 +4491,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add დამატება @@ -4512,38 +4507,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit ჩასწორება - + Base 2D object ბაზის 2D ობიექტი - - + + Wires პოლიხაზები - + Components კომპონენტები - + Name სახელი - + Type ტიპი @@ -4558,38 +4553,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset წანაცვლება - + Hinge ანჯამა - + Opening mode გახსნის რეჟიმი - + + Frame property - + Frame property + + ჩარჩოს თვისება - + + Offset property - + Offset property + + წანაცვლების თვისება + + + + Get Selected Edge + მონიშნული წიბოს მიღება - Get Selected Edge - Get Selected Edge - - - Press to retrieve the selected edge მონიშნული წიბოს მისაღებად დააწკაპუნეთ @@ -4635,7 +4630,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela წარმატებით ჩაიწერა - + Truss ფერმა @@ -4690,17 +4685,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela {panel.Label}-ის ხედი - + Project პროექტი - + Stairs კიბეები - + Railing მოაჯირი @@ -4710,12 +4705,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela კიბის შექმნა - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' წაიშალა თვისებები 'OutlineWireLeft' და 'OutlineWireRight'. დაემატა 'RailingLeft' და 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' შეიცვალა 'RailingLeft'-ის და 'RailingRight'-ის ტიპი @@ -4744,7 +4739,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Merge Duplicates - Merge Duplicates + დუბლიკატების შერწყმა @@ -4815,17 +4810,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Delete Column - Delete Column + სვეტის წაშლა Create Span - Create Span + მალის შექმნა Remove Span - Remove Span + მალის მოცილება @@ -5027,7 +5022,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape მოხაზულობის გამოთვლა შეუძლებელია @@ -5248,7 +5243,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela საზომი ერთეულები - + Schedule დაგეგმვა @@ -5381,17 +5376,17 @@ Floor creation aborted. Components of This Object - Components of This Object + ამ ობიექტის კომპონენტები Edit IFC Properties - Edit IFC Properties + IFC თვისებების ჩასწორება Edit Standard Code - Edit Standard Code + სტანდარტული კოდის ჩასწორება @@ -5489,7 +5484,7 @@ Floor creation aborted. ახალი თვისებების ჯგუფი - + Rebar არმატურა @@ -5505,7 +5500,7 @@ Floor creation aborted. მონიშნეთ საბაზისო ზედაპირი ან სტრუქტურული ობიექტი - + Section სექცია @@ -5639,7 +5634,7 @@ Building creation aborted. შენობის შექმნა - + Space გამოტოვება @@ -5659,12 +5654,12 @@ Building creation aborted. სივრცის საზღვრები - + Wall კედელი - + Walls can only be based on Part or Mesh objects კედლები შეიძლება დაფუძნებული იყოს ნაწილის ან ბადის ობიექტებზე @@ -5722,24 +5717,24 @@ Building creation aborted. კედლების შერწყმა - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction შეიცვალა 'Normal' მნიშვნელობაზე [0, 0, 1] გამოწნეხვის მიმართულების შესანარჩუნებლად - + Cannot compute blocks for wall კედლისთვის ბლოკების გამოთვლა შეუძლებელია - + Error: Unable to modify the base object of this wall შეცდომა: ამ კედლის ძირითადი ობიექტის შეცვლა შეუძლებელია - + Flip Direction - Flip Direction + გადაბრუნების მიმართულება @@ -5819,17 +5814,17 @@ Building creation aborted. Set Description - Set Description + აღწერის დაყენება Copy Total Length - Copy Total Length + ჯამური სიგრძის კოპირება Copy Total Area - Copy Total Area + ჯამური ფართის კოპირება @@ -5875,7 +5870,7 @@ Building creation aborted. The selected wall contains no subwalls to merge - The selected wall contains no subwalls to merge + მონიშნული კედელი არ შეიცავს ქვეკედლებს შერწყმისთვის @@ -5954,12 +5949,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures ბევრი სტრუქტურა - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5967,12 +5962,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System სტრუქტურული სისტემა - + Create a structural system from a selected structure and axis მონიშნული სტრუქტურისა და ღერძისაგან სტრუქტურული სისტემის შექმნა @@ -5980,12 +5975,12 @@ Building creation aborted. Arch_Structure - + Structure სტრუქტურა - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) ქმნის სტრუქტურას ნულიდან ან არჩეული ობიექტიდან (ესკიზი, პოლიხაზი, სიბრტყე ან მყარი სხეული) @@ -5993,146 +5988,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element ამ ელემენტის არასავალდებულო გამოწნევის გზა - + The computed length of the extrusion path ექსტრუზიის ბილიკის გამოთვლილი სიგრძე - + Start offset distance along the extrusion path (positive: extend, negative: trim) გამოწნევის ტრაექტორიის გასწვრივ მანძილის საწყისი წანაცვლება (დადებითი: გაგრძელება, უარყოფითი: მოჭრა) - + End offset distance along the extrusion path (positive: extend, negative: trim) გამოწნევის ტრაექტორიის გასწვრივ მანძილის საბოლოო წანაცვლება (დადებითი: გაგრძელება, უარყოფითი: მოჭრა) - + Automatically align the Base of the Structure perpendicular to the Tool axis სტრუქტურის ფუძის ხელსაწყოს ღერძთან პერპენდიკულურობის ავტომატური სწორება - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X წანაცვლება საბაზისო საწყისსა და ხელსაწყოს ღერძს შორის (გამოიყენება მხოლოდ იმ შემთხვევაში, თუ BasePerpendicularToTool არის True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y წანაცვლება საბაზისო საწყისსა და ხელსაწყოს ღერძს შორის (გამოიყენება მხოლოდ იმ შემთხვევაში, თუ BasePerpendicularToTool არის True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) ბაზის ასლი მისი Y ღერძის გასწვრივ (გამოიყენება მხოლოდ იმ შემთხვევაში, თუ BasePerpendicularTool დაყენებულია "True"-ზე) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) ბაზის მოტრიალება ხელსაწყოს ღერძის გარშემო (გამოიყენება მხოლოდ თუ BasePerpendicularToTool დაყენებულია "True"-ზე) - + The length of this element, if not based on a profile ამ ელემენტის სიგრძე, თუ არ არის დაფუძნებული პროფილზე - + The width of this element, if not based on a profile ამ ელემენტის სიგანე, თუ არ არის დაფუძნებული პროფილზე - + The height or extrusion depth of this element. Keep 0 for automatic ამ ელემენტის სიმაღლე ან გამოწნევის სიღრმე. ავტომატური მნიშვნელობისთვის დატოვეთ 0 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) ამ ობიექტის ნორმალის გამოწნეხვის მიმართულება (ავტომატური ნორმალისთვის დატოვეთ (0,0,0)) - + The structural nodes of this element ამ ელემენტის სტრუქტურული კვანძები - + A description of the standard profile this element is based upon ელემენტის სტანდარტული პროფილის აღწერის წყარო - + Offset distance between the centerline and the nodes line ცენტრალურ ხაზსა და საკვანძო ხაზს შორის წანაცვლებული მანძილი - + The facemaker type to use to build the profile of this object ობიექტის პროფილის შესაქმნელად გამოსაყენებელი facemaker-ის ტიპი - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. ArchSketch-ს ბაზის მონიშნული წიბოები (ან წიბოების ჯგუფები) ამ BIM სტრუქტურის მონახაზის შექმნისას გამოსაყენებლად (ნაგულისხმევად ყველა საბაზისო მონახაზის წიბოს მაგიერ). საჭიროებს წიბოების ან ჯგუფების ინდექსის ნომრებს. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not გამოჩნდეს თუ არა კვანძები - + The width of the nodes line საკვანძო ხაზის სიგანე - + The size of the node points საკვანძო წერტილების ზომა - + The color of the nodes line საკვანძო ხაზის ფერი - + The type of structural node სტრუქტურული კვანძის ტიპი - + Axes systems this structure is built on ღერძების სისტემები, რომლებზეც აგებულია ეს სტრუქტურა - + The element numbers to exclude when this structure is based on axes გამოსარიცხი ელემენტის ნომრები, როცა ეს სტრუქტურა დაფუძნებულია ღერძებზე - + If true the element are aligned with axes თუ ჩართულია, ელემენტი ღერძებთან იქნება სწორებული @@ -6432,6 +6427,42 @@ Building creation aborted. Thickness of the legs ფეხების სისქე + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6555,7 +6586,7 @@ Building creation aborted. The generated sun ray object - The generated sun ray object + დაგენერირებული მზის სხივის ობიექტი @@ -6610,42 +6641,42 @@ Building creation aborted. Show the sun position for a specific date and time - Show the sun position for a specific date and time + მზის მდებარეობის ჩვენება მითითებული თარიღისა და დროისთვის The month of the year to show the sun position - The month of the year to show the sun position + წლის თვე მზის მდებარეობის საჩვენებლად The day of the month to show the sun position - The day of the month to show the sun position + თვის დღე მზის მდებარეობის საჩვენებლად The hour of the day to show the sun position - The hour of the day to show the sun position + დღის საათი მზის მდებარეობის საჩვენებლად Show text labels for key hours on the sun path - Show text labels for key hours on the sun path + ტექსტური წარწერების ჩვენება საკვანძო საათებისთვის მზის ბილიკზე The altitude of the sun above the horizon - The altitude of the sun above the horizon + მზის სიმაღლე ჰორიზონტის ზემოთ The compass direction of the sun (0° is North) - The compass direction of the sun (0° is North) + მზის კომპასის მიმართულება (0° ჩრდილოეთია) The date and time for this sun position - The date and time for this sun position + დრო და თარიღი ამ მზის მდებარეობისთვის @@ -6875,7 +6906,7 @@ Building creation aborted. მათი არსებობის შემთხვევაში სიმაღლის ღიობების სიმბოლოების ჩვენება - + The number of the wire that defines the hole. A value of 0 means automatic პოლიხაზების რაოდენობა, რომელიც განსაზღვრავს ხვრელს. მნიშვნელობა 0 ნიშნავს ავტომატურს @@ -7047,7 +7078,7 @@ Building creation aborted. Last Segment (Flight or Landing) of Arch Stairs connecting to This Segment - Last Segment (Flight or Landing) of Arch Stairs connecting to This Segment + არქიტექტურული კიბეების ბოლო სეგმენტი (მარში ან ბაქანი), რომელიც ამ სეგმენტს უერთდება @@ -7132,7 +7163,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads კიბეების ქვედა ნაწილის კასაურებთან კვეთა @@ -8270,7 +8301,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8279,12 +8310,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools სტრუქტურის ხელსაწყოები - + Structure tools კონსტრუქციის ხელსაწყოები @@ -8983,7 +9014,7 @@ Building creation aborted. Closes holes in open shapes, turning them into solids - Closes holes in open shapes, turning them into solids + ხურავს ხვრელებს ღია მოხაზულობებში მათი მყარ ობიექტებად გადაქცევის გზით @@ -9644,37 +9675,37 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet Search Objects - Search Objects + ობიექტების ძებნა Searches for objects in the tree - Searches for objects in the tree + ეძებს ობიექტებს ხეში Material Operations - Material Operations + მასალის ოპერაციები New Material - New Material + ახალი მასალა Create new Multi-Material - Create new Multi-Material + ახალი მრავალკომპონენტიანი მასალის შექმნა Merge Duplicates - Merge Duplicates + დუბლიკატების შერწყმა Delete Unused - Delete Unused + გამოუყენებლების წაშლა @@ -9763,7 +9794,7 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet The version of Ifcopenshell installed on the system could not be parsed - The version of Ifcopenshell installed on the system could not be parsed + სისტემაში დაყენებული ifcopenshell-ის ვერსიის დამუშავება შეუძლებელია @@ -10074,12 +10105,12 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet Add Level - Add Level + დონი დამატება Add Proxy WP - Add Proxy WP + პროქსი სამუშაო დაფის დამატება @@ -10089,12 +10120,12 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet Save View Position - Save View Position + ხედის მდებარეობის შენახვა Toggles the visibility of selected items - Toggles the visibility of selected items + მონიშნული ელემენტების ხილვადობის გადართვა @@ -10274,7 +10305,7 @@ CTRL+PgUp to extend extrusionCTRL+PgDown to shrink extrusionCTRL+/ to switch bet No section view, Draft object, or page found or selected in the document - No section view, Draft object, or page found or selected in the document + დოკუმენტში ჭრილის ხედი, მონახაზი ან გვერდები აღმოჩენილი ან მონიშნული არაა @@ -10339,68 +10370,68 @@ Please check your FreeCAD installation or provide a custom template under menu P Deactivate Container - Deactivate Container + კონტეინერის დეაქტივაცია Make Active Container - Make Active Container + აქტიური კონტეინერის შექმნა Expand Children - Expand Children + შვილების გაფართოება Collapse Children - Collapse Children + შვილების ჩამოშლა Remove Shape - Remove Shape + მოხაზულობის წაშლა Load Shape - Load Shape + მოხაზულობის ჩატვირთვა Load Representation - Load Representation + რეპრეზენტაციის ჩატვირთვა Add Geometry Properties - Add Geometry Properties + გეომეტრიის თვისებების დამატება Show Geometry Tree - Show Geometry Tree + გეომეტრიის ხის ჩვენება Expand Property Sets - Expand Property Sets + თვისების სეტების გაფართოება Load Material - Load Material + მასალის ჩატვირთვა Convert to Type - Convert to Type + გადაყვანა ტიპში View Diff - View Diff + სხვაობის ნახვა @@ -10621,7 +10652,7 @@ Please check your FreeCAD installation or provide a custom template under menu P Deletes all objects from the trash bin that are not used by any other - Deletes all objects from the trash bin that are not used by any other + წაშლის ყველა იმ ობიექტს ნაგვის ყუთში, რომლებიც არ გამოიყენება სხვების მიერ diff --git a/src/Mod/BIM/Resources/translations/Arch_ko.qm b/src/Mod/BIM/Resources/translations/Arch_ko.qm index 0dc64c5039..f643d3317b 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ko.qm and b/src/Mod/BIM/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ko.ts b/src/Mod/BIM/Resources/translations/Arch_ko.ts index 2c0a927062..57903f586f 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ko.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ko.ts @@ -3765,72 +3765,67 @@ The default template is located at: Arch - Structure - 구조 - - - - + Beam 빔 - - + + Column 기둥 - + StructuralSystem 구조 시스템 - + Create Structures From Selection 선택 항목에서 구조 만들기 - + Create Structural System 구조 시스템 만들기 - - + + Create Structure 구조 만들기 - + First point of the beam 보의 첫번째 지점 - + Base point of column 기둥의 기준점 - + Next point 다음 지점 - + Structure options 구조 옵션 - + Category 카테고리 - + @@ -3840,7 +3835,7 @@ The default template is located at: - + Length @@ -3848,7 +3843,7 @@ The default template is located at: - + Width @@ -3857,158 +3852,158 @@ The default template is located at: - + Height 높이 - + Parameters of the structure 구조의 매개변수 - + Switch Length/Height 길이 / 높이 변경 - + Switch Length/Width 길이 / 너비 맞바꾸기 - - + + This mesh is an invalid solid 이 메시는 유효하지 않은 솔리드입니다 - + Facemaker returned an error 페이스메이커가 오류를 반환했습니다 - + Node Tools 노드 도구 - + Extends the nodes of this element to reach the nodes of another element 이 엘리먼트의 노드를 확장하여 다른 엘리먼트의 노드에 도달합니다 - + Connects nodes of this element with the nodes of another element 이 엘리먼트의 노드를 다른 엘리먼트의 노드와 연결합니다 - + Toggles all structural nodes of the document on/off 문서의 모든 구조 노드를 켜기/끄기 합니다 - + Extrusion Tools 압출 도구 - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: 다른 구조 객체를 선택하세요: - - + + The chosen object is not a Structure 선택한 객체가 구조가 아닙니다 - - + + The chosen object has no structural nodes 선택한 객체에 구조적 노드가 없습니다 - - + + One of these objects has more than 2 nodes 이 객체들 중 하나에 노드가 2개 이상 있습니다 - - + + Unable to find a suitable intersection point 적합한 교차점을 찾을 수 없음 - + Intersection found. 교차점을 찾았습니다. - + Intersection found. 교차점을 찾았습니다. - + Done 완료 @@ -4053,12 +4048,12 @@ The default template is located at: 프로필 만들기 - + Profile 윤곽 - + Site 사이트 @@ -4121,7 +4116,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 기본 객체를 선택 하십시오 - + Roof 지붕 @@ -4192,7 +4187,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 정면 - + External Reference 외부 참조 @@ -4360,7 +4355,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile 라이브러리는 다음 URL에서 다운로드하여 매크로 폴더에 설치할 수 있습니다: - + Window 작업창 @@ -4407,75 +4402,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 턱 높이 - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening 이 창에는 정의된 열림이 없습니다 - - + + Get selected edge 선택한 모서리 가져오기 - + Unable to create component 구성 요소를 만들 수 없습니다 - + Window elements 창 엘리먼트 - + Hole wire 홀 와이어 - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire 호스트 객체에 구멍을 정의하는 와이어의 수입니다. 값이 0이면 가장 큰 와이어가 자동으로 채택됩니다 - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4485,7 +4480,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove 제거 @@ -4494,7 +4489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 추가하기 @@ -4510,38 +4505,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 편집 - + Base 2D object 기본 2D 객체 - - + + Wires 철사 - + Components 구성 요소 - + Name 이름 - + Type 유형 @@ -4556,38 +4551,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset 편차 - + Hinge 경첩 - + Opening mode 열기모드 - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge 선택한 에지를 얻으려면 누르세요 @@ -4633,7 +4628,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 작성을 성공했습니다 - + Truss 트러스 @@ -4688,17 +4683,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project 프로젝트 - + Stairs 계단 - + Railing 난간 @@ -4708,12 +4703,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 계단 만들기 - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' 'OutlineWireLeft' 및 'OutlineWireRight' 속성을 제거하고 'RailingLeft' 및 'RailingRight' 속성을 추가했습니다 - + changed the type of properties 'RailingLeft' and 'RailingRight' 속성의 유형을 'Railing Left'와 'Railing Right'로 변경했습니다 @@ -5025,7 +5020,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5246,7 +5241,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 단위 - + Schedule 일정 @@ -5487,7 +5482,7 @@ Floor creation aborted. 새로운 속성 집합 - + Rebar 철근 @@ -5503,7 +5498,7 @@ Floor creation aborted. Select a base face on a structural object - + Section 단면 @@ -5637,7 +5632,7 @@ Building creation aborted. 건물 만들기 - + Space 공간 @@ -5657,12 +5652,12 @@ Building creation aborted. 공간 경계 - + Wall 벽 - + Walls can only be based on Part or Mesh objects 벽은 Part 또는 Mesh 객체만 기준으로 할 수 있습니다 @@ -5720,22 +5715,22 @@ Building creation aborted. 벽 합치기 - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall 벽에 대한 블록을 계산할 수 없습니다 - + Error: Unable to modify the base object of this wall 오류: 이 벽의 기본 객체를 수정할 수 없습니다 - + Flip Direction Flip Direction @@ -5952,12 +5947,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures 다중 구조물 - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5965,12 +5960,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System 구조 시스템 - + Create a structural system from a selected structure and axis 선택한 구조물 및 축에서 구조 시스템 만들기 @@ -5978,12 +5973,12 @@ Building creation aborted. Arch_Structure - + Structure 구조 - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) 처음부터 또는 선택한 객체(스케치, 와이어, 페이스 또는 솔리드) 에서 구조물을 만듭니다 @@ -5991,146 +5986,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element 이 엘리먼트의 선택 가능한 압출 경로 - + The computed length of the extrusion path 돌출 경로의 계산된 길이 - + Start offset distance along the extrusion path (positive: extend, negative: trim) 돌출 경로를 따라 거리 띄우기 시작(양수: 확장, 음수: 축소) - + End offset distance along the extrusion path (positive: extend, negative: trim) 돌출 경로를 따라 거리 띄우기 종료(양수: 확장, 음수: 축소) - + Automatically align the Base of the Structure perpendicular to the Tool axis 구조물의 바닥면을 도구 축에 수직으로 자동 정렬 - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) 바닥면 원점과 도구 축 사이의 X 오프셋 (도구에 수직인 바닥면이 참인 경우에만 사용됨) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) 바닥면 원점과 도구 축 사이의 Y 오프셋 (도구에 수직인 바닥면이 참인 경우에만 사용됨) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Y 축을 따라 베이스를 미러링합니다(BasePerpendicularToTool 이 참인 경우에만 사용) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) 공구 축을 중심으로 한 베이스 회전(BasePerpendicularToTool 이 참인 경우에만 사용) - + The length of this element, if not based on a profile 프로파일에서 지원하지 않는 경우, 엘리먼트의 길이임. - + The width of this element, if not based on a profile 프로파일에서 지원하지 않는 경우, 엘리먼트의 폭임. - + The height or extrusion depth of this element. Keep 0 for automatic 엘리먼트의 높이 또는 돌출 깊이, 자동은 0를 유지합니다. - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 객체의 일반적인 돌출 방향(자동의 경우 (0,0,0) 를 유지) - + The structural nodes of this element 이 원소의 구조적 노드 - + A description of the standard profile this element is based upon 이 엘리먼트의 기준이 되는 표준 프로파일에 대한 설명 - + Offset distance between the centerline and the nodes line 중심선과 노드 선 사이의 오프셋 거리 - + The facemaker type to use to build the profile of this object 이 객체의 프로파일을 작성하는 데 사용할 페이스메이커 유형 - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not 노드가 표시되는지 여부 - + The width of the nodes line 노드 선의 너비 - + The size of the node points 노드 점의 크기 - + The color of the nodes line 노드 선의 색상 - + The type of structural node 구조 노드의 유형 - + Axes systems this structure is built on 축 시스템은 이 구조물을 기반으로 합니다 - + The element numbers to exclude when this structure is based on axes 이 구조가 축을 기준으로 할 때 제외할 엘리먼트 번호 - + If true the element are aligned with axes 참이면 엘리먼트가 축과 정렬됩니다 @@ -6430,6 +6425,42 @@ Building creation aborted. Thickness of the legs 다리의 두께 + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6867,7 +6898,7 @@ Building creation aborted. 사용 가능한 경우 고도 열림 기호 표시 - + The number of the wire that defines the hole. A value of 0 means automatic 구멍을 정의하는 와이어의 수. 값이 0이면 자동입니다 @@ -7124,7 +7155,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads 트레드 바닥 위에 있는 스트링어의 겹침 @@ -8262,7 +8293,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8271,12 +8302,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools 구조 도구 diff --git a/src/Mod/BIM/Resources/translations/Arch_nl.qm b/src/Mod/BIM/Resources/translations/Arch_nl.qm index 147fa1de4f..6bbf5a3ad1 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_nl.qm and b/src/Mod/BIM/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_nl.ts b/src/Mod/BIM/Resources/translations/Arch_nl.ts index 9f350e4a89..8b087878f5 100644 --- a/src/Mod/BIM/Resources/translations/Arch_nl.ts +++ b/src/Mod/BIM/Resources/translations/Arch_nl.ts @@ -3771,72 +3771,67 @@ The default template is located at: Arch - Structure - Structuur - - - - + Beam Balk - - + + Column Kolom - + StructuralSystem ConstructieSysteem - + Create Structures From Selection Structuren maken van selectie - + Create Structural System Creëer Structureel Systeem - - + + Create Structure Structuur aanmaken - + First point of the beam Eerste punt van de balk - + Base point of column Base point of column - + Next point Volgend punt - + Structure options Structuuropties - + Category Categorie - + @@ -3846,7 +3841,7 @@ The default template is located at: - + Length @@ -3854,7 +3849,7 @@ The default template is located at: - + Width @@ -3863,158 +3858,158 @@ The default template is located at: - + Height Hoogte - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Dit net vormt een ongeldige solid - + Facemaker returned an error Facemaker gaf een foutmelding - + Node Tools Knooppunt gereedschap - + Extends the nodes of this element to reach the nodes of another element Breidt de knooppunten van dit element uit om de knooppunten van een ander element te bereiken - + Connects nodes of this element with the nodes of another element Verbindt knooppunten van dit element met het knooppunt van een ander element - + Toggles all structural nodes of the document on/off Alle structurele knooppunten van het document in-/ uitschakelen - + Extrusion Tools Extrusie gereedschap - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Kies een ander Structuur-object: - - + + The chosen object is not a Structure Het gekozen object is geen Structuur-object - - + + The chosen object has no structural nodes Het gekozen object heeft geen structurele knooppunten - - + + One of these objects has more than 2 nodes Een van deze objecten heeft meer dan 2 knooppunten - - + + Unable to find a suitable intersection point Kan geen geschikt snijpunt vinden - + Intersection found. Snijpunt gevonden. - + Intersection found. Snijpunt gevonden. - + Done Klaar @@ -4059,12 +4054,12 @@ The default template is located at: Profiel aanmaken - + Profile Profiel - + Site Bouwterrein @@ -4127,7 +4122,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Selecteer een basisobject - + Roof Dak @@ -4198,7 +4193,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Voorzijde - + External Reference Externe referentie @@ -4366,7 +4361,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Raam @@ -4413,75 +4408,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Dit raam heeft geen gedefiniëerde opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4491,7 +4486,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Verwijderen @@ -4500,7 +4495,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Toevoegen @@ -4516,38 +4511,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Bewerken - + Base 2D object Base 2D object - - + + Wires Draden - + Components Onderdelen - + Name Naam - + Type Type @@ -4562,38 +4557,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Verschuiving - + Hinge Hinge - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4639,7 +4634,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Met succes geschreven - + Truss Truss @@ -4694,17 +4689,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Project - + Stairs Trap - + Railing Railing @@ -4714,12 +4709,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Trap maken - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5031,7 +5026,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5252,7 +5247,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Eenheid - + Schedule Planning @@ -5493,7 +5488,7 @@ Floor creation aborted. Nieuwe eigenschapset - + Rebar Wapening @@ -5509,7 +5504,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Deel @@ -5643,7 +5638,7 @@ Building creation aborted. Create Building - + Space Ruimte @@ -5663,12 +5658,12 @@ Building creation aborted. Space boundaries - + Wall Muur - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5726,22 +5721,22 @@ Building creation aborted. Muren samenvoegen - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5958,12 +5953,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Meerdere structuren - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5971,12 +5966,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Structureel systeem - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5984,12 +5979,12 @@ Building creation aborted. Arch_Structure - + Structure Structuur - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -5997,146 +5992,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6436,6 +6431,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6873,7 +6904,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7130,7 +7161,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8268,7 +8299,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8277,12 +8308,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_pl.qm b/src/Mod/BIM/Resources/translations/Arch_pl.qm index 658d414b87..0a91ce68bc 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_pl.qm and b/src/Mod/BIM/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_pl.ts b/src/Mod/BIM/Resources/translations/Arch_pl.ts index 6d6bd7e1de..531a12b1e0 100644 --- a/src/Mod/BIM/Resources/translations/Arch_pl.ts +++ b/src/Mod/BIM/Resources/translations/Arch_pl.ts @@ -1885,7 +1885,7 @@ Pliki FCStd i IFC zostaną umieszczone w miejscach zdefiniowanych w pliku. Save As… - Save As… + Zapisz jako … @@ -3794,72 +3794,67 @@ The default template is located at: Arch - Structure - Konstrukcja - - - - + Beam Belka - - + + Column Słup - + StructuralSystem System Konstrukcyjny - + Create Structures From Selection Utwórz konstrukcje z zaznaczonych elementów - + Create Structural System Utwórz układ konstrukcyjny - - + + Create Structure Utwórz konstrukcję - + First point of the beam Punkt początkowy belki - + Base point of column Punkt bazowy kolumny - + Next point Następny punkt - + Structure options Opcje konstrukcyjne - + Category Kategoria - + @@ -3869,7 +3864,7 @@ The default template is located at: - + Length @@ -3877,7 +3872,7 @@ The default template is located at: - + Width @@ -3886,158 +3881,158 @@ The default template is located at: - + Height Wysokość - + Parameters of the structure Parametry konstrukcji - + Switch Length/Height Przełącz długość/wysokość - + Switch Length/Width Przełącz długość/szerokość - - + + This mesh is an invalid solid Ta siatka nie jest poprawną bryłą - + Facemaker returned an error Kreator ścian zwrócił błąd - + Node Tools Narzędzia węzłów - + Extends the nodes of this element to reach the nodes of another element Rozszerza punkty węzłów tego elementu, aby dosięgnąć punktów węzłów innego elementu - + Connects nodes of this element with the nodes of another element Łączy węzły tego elementu z węzłami innego elementu - + Toggles all structural nodes of the document on/off Włącza / wyłącza wszystkie węzły konstrukcyjne dokumentu - + Extrusion Tools Narzędzia do wyciągania - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Wybierz inny obiekt konstrukcji: - - + + The chosen object is not a Structure Wybrany obiekt nie jest konstrukcją - - + + The chosen object has no structural nodes Wybrany obiekt nie ma węzłów konstrukcyjnych - - + + One of these objects has more than 2 nodes Jeden z tych obiektów ma więcej niż 2 węzły - - + + Unable to find a suitable intersection point Nie można znaleźć odpowiedniego punktu przecięcia - + Intersection found. Znaleziono przecięcie. - + Intersection found. Znaleziono przecięcie. - + Done Gotowe @@ -4082,12 +4077,12 @@ The default template is located at: Utwórz profil - + Profile Kontur - + Site Teren @@ -4150,7 +4145,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wybierz obiekt bazowy - + Roof Dach @@ -4222,7 +4217,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Przed - + External Reference Odniesienie zewnętrzne @@ -4390,7 +4385,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Biblioteka shapefile może zostać pobrana z następującego adresu URL i zainstalowana w folderze makrodefinicji: - + Window Okno @@ -4437,75 +4432,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wysokość parapetu - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening To okno nie ma określonego sposobu otwierania - - + + Get selected edge Pobierz wybraną krawędź - + Unable to create component Nie można utworzyć komponentu - + Window elements Elementy okna - + Hole wire Szkielet otworu - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numer polilinii definiującej otwór w obiekcie nadrzędnym. Wartość zero automatycznie przyjmie najdłuższą polilinię - + Pick Selected - Pick Selected + Wybierz zaznaczone - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4515,7 +4510,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Usuń @@ -4524,7 +4519,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -4540,38 +4535,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Edytuj - + Base 2D object Podstawowy obiekt 2D - - + + Wires Polilinie - + Components Komponenty - + Name Nazwa - + Type Typ @@ -4586,38 +4581,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Odsunięcie - + Hinge Zawias - + Opening mode Rodzaj otwierania - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Naciśnij, aby odzyskać wybraną krawędź @@ -4663,7 +4658,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Zapisano pomyślnie - + Truss Wiązar @@ -4718,17 +4713,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Schody - + Railing Balustrada @@ -4738,12 +4733,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Utwórz schody - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' usunięto właściwości "OutlineWireLeft" i "OutlineWireRight" i dodano właściwości "RailingLeft" oraz "RailingRight" - + changed the type of properties 'RailingLeft' and 'RailingRight' zmieniono typ właściwości "PoręczLewa" oraz "PoręczPrawa" @@ -4828,7 +4823,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add Row - Add Row + Dodaj wiersz @@ -4838,17 +4833,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add Column - Add Column + Dodaj kolumnę Delete Column - Delete Column + Usuń kolumnę Create Span - Create Span + Utwórz zakres @@ -5055,7 +5050,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5276,7 +5271,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Jednostka - + Schedule Obmiar @@ -5517,7 +5512,7 @@ Tworzenie piętra zostało przerwane. Nowy zestaw właściwości - + Rebar Zbrojenie @@ -5533,7 +5528,7 @@ Tworzenie piętra zostało przerwane. Select a base face on a structural object - + Section Przekrój @@ -5667,7 +5662,7 @@ Tworzenie budynku zostało przerwane. Utwórz budynek - + Space Przestrzeń @@ -5687,12 +5682,12 @@ Tworzenie budynku zostało przerwane. Granice przestrzeni - + Wall Ściana - + Walls can only be based on Part or Mesh objects Ściany mogą być oparta wyłącznie na obiektach Części lub Siatki @@ -5751,22 +5746,22 @@ Utwórz kilka, aby zdefiniować typy ścian. Połącz ściany - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction zmieniono "Normalny" na [0, 0, 1], aby zachować kierunek wyciągnięcia - + Cannot compute blocks for wall Nie można obliczyć bloków dla ściany - + Error: Unable to modify the base object of this wall Błąd: Nie można zmodyfikować obiektu podstawowego tej ściany - + Flip Direction Flip Direction @@ -5793,7 +5788,7 @@ Utwórz kilka, aby zdefiniować typy ścian. {0} is mapped to {1}, removing the former's Attachment Support to avoid cyclic dependency. - {0} is mapped to {1}, removing the former's Attachment Support to avoid cyclic dependency. + {0} jest mapowany na {1}, usunięto więc jego Podparcie Dołączenia, aby uniknąć cyklicznej zależności. @@ -5983,12 +5978,12 @@ Utwórz kilka, aby zdefiniować typy ścian. Arch_StructuresFromSelection - + Multiple Structures Wiele konstrukcji - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5996,12 +5991,12 @@ Utwórz kilka, aby zdefiniować typy ścian. Arch_StructuralSystem - + Structural System Układ konstrukcyjny - + Create a structural system from a selected structure and axis Utwórz obiekt Układu konstrukcyjnego z wybranej konstrukcji i osi @@ -6009,12 +6004,12 @@ Utwórz kilka, aby zdefiniować typy ścian. Arch_Structure - + Structure Konstrukcja - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Utwórz obiekt Konstrukcja od zera lub z wybranych obiektów (szkic, polilinia, ściana lub bryła) @@ -6022,148 +6017,148 @@ Utwórz kilka, aby zdefiniować typy ścian. App::Property - - + + An optional extrusion path for this element Opcjonalna ścieżka wyciągnięcia dla tego elementu - + The computed length of the extrusion path Obliczona długość ścieżki wyciągnięcia - + Start offset distance along the extrusion path (positive: extend, negative: trim) Rozpocznij odległość odsunięcia wzdłuż ścieżki wyciągnięcia (dodatnie: wydłuż, ujemne: przytnij) - + End offset distance along the extrusion path (positive: extend, negative: trim) Zakończ odległość odsunięcia wzdłuż ścieżki wyciągnięcia (dodatnie: wydłuż, ujemne: przytnij) - + Automatically align the Base of the Structure perpendicular to the Tool axis Wyrównaj automatycznie podstawę konstrukcji prostopadle do osi narzędzia - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Odsunięcie w kierunku X pomiędzy punktem bazowym i osią narzędzia (używane wyłącznie, gdy parametr BasePerpendicularToTool ma wartość Prawda) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Przesunięcie w kierunku Y pomiędzy punktem bazowym i osią narzędzia (używane wyłącznie, gdy parametr BasePerpendicularToTool ma wartość Prawda) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Odbicie lustrzane bazy wzdłuż jej osi Y (używane tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Obrót bazy wokół osi narzędzia (używany, tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) - + The length of this element, if not based on a profile Długość tego elementu, jeśli nie jest oparta na profilu - + The width of this element, if not based on a profile Szerokość tego elementu, jeśli nie jest oparta na profilu - + The height or extrusion depth of this element. Keep 0 for automatic Wysokość lub głębokość wyciągnięcia tego elementu. Zostaw 0 dla automatycznej wartości - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Kierunek normalny wyciągnięcia tego obiektu (zostaw (0,0,0) dla automatycznego kierunku normalnego) - + The structural nodes of this element Węzły konstrukcyjne tego elementu - + A description of the standard profile this element is based upon Opis standardowego profilu, na ktorym ten element jest oparty - + Offset distance between the centerline and the nodes line Odległość odsunięcia między linią środkową a linią węzłów - + The facemaker type to use to build the profile of this object Typ kreatora ścian używany do utworzenia profilu tego obiektu - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Wybrano krawędzie (lub grupę krawędzi) bazowego Szkicu Architektonicznego, aby użyć ich do tworzenia kształtu tej konstrukcji BIM (zamiast używać domyślnie wszystkich krawędzi kształtu podstawowego). Dane wejściowe to numery indeksów krawędzi lub grup. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Wybierz zestaw właściwości zdefiniowany przez użytkownika, który ma zostać użyty przy tworzeniu kształtu wariantowego z tym samym ArchSketch Wybierz właściwość użytkownika PropertySet do użycia przy tworzeniu wariantu kształtu, z tym samym obiektem ArchSketch - + If the nodes are visible or not Jeśli węzły są widoczne lub nie - + The width of the nodes line Szerokość linii węzłów - + The size of the node points Rozmiar punktów węzła - + The color of the nodes line Kolor linii węzłów - + The type of structural node Typ węzła strukturalnego - + Axes systems this structure is built on Systemy osi, na których zbudowana jest ta struktura - + The element numbers to exclude when this structure is based on axes Numery elementów do wykluczenia, gdy konstrukcja oparta jest na osiach - + If true the element are aligned with axes Jeśli to prawda, element jest wyrównany z osiami @@ -6464,6 +6459,42 @@ jeśli wysokość tych obiektów jest ustawiona na 0 Thickness of the legs Grubość podpór + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6903,7 +6934,7 @@ ma pierwszeństwo przed automatycznie generowaną objętością podrzędną.Wyświetl symbole pokazujące rzędne, jeśli są dostępne - + The number of the wire that defines the hole. A value of 0 means automatic Numer polilinii definiującej otwór. Wartość 0 oznacza automatyczny @@ -7160,7 +7191,7 @@ ma pierwszeństwo przed automatycznie generowaną objętością podrzędną. - + The overlap of the stringers above the bottom of the treads Nakładanie się podłużnic powyżej dołu bieżnika @@ -8329,7 +8360,7 @@ Narzędzie GUI „Edytuj segment ściany” jest dostępne w zewnętrznym dodatk Wybierz zestaw właściwości zdefiniowany przez użytkownika, który ma zostać użyty do utworzenia wariantu kształtu, warstw ściany Arch Wall z tym samym szkicem ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Użyj danych bazowych ArchSketch (jeśli są używane) (np. szerokości, wyrównania, odsunięcia) zamiast właściwości ściany. @@ -8338,12 +8369,12 @@ Narzędzie GUI „Edytuj segment ściany” jest dostępne w zewnętrznym dodatk Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Narzędzia konstrukcyjne @@ -10434,7 +10465,7 @@ Sprawdź swoją instalację FreeCAD lub wprowadź niestandardowy szablon w menu Load Shape - Load Shape + Wczytaj kształt @@ -10540,7 +10571,7 @@ Sprawdź swoją instalację FreeCAD lub wprowadź niestandardowy szablon w menu Shape Builder - Shape Builder + Konstruktor kształtu @@ -10910,7 +10941,7 @@ Sprawdź swoją instalację FreeCAD lub wprowadź niestandardowy szablon w menu 2D Offset - 2D Offset + Odsunięcie 2D diff --git a/src/Mod/BIM/Resources/translations/Arch_pt-BR.qm b/src/Mod/BIM/Resources/translations/Arch_pt-BR.qm index 4b452595c8..6d3510bf45 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_pt-BR.qm and b/src/Mod/BIM/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_pt-BR.ts b/src/Mod/BIM/Resources/translations/Arch_pt-BR.ts index 6c70d3a2c7..db068b49c1 100644 --- a/src/Mod/BIM/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/BIM/Resources/translations/Arch_pt-BR.ts @@ -3753,72 +3753,67 @@ The default template is located at: Arch - Structure - Estrutura - - - - + Beam Viga - - + + Column Coluna - + StructuralSystem Sistema Estrutural - + Create Structures From Selection Criar estruturas a partir da seleção - + Create Structural System Criar sistema estrutural - - + + Create Structure Criar estrutura - + First point of the beam Primeiro ponto da viga - + Base point of column Ponto base da coluna - + Next point Próximo ponto - + Structure options Opções de estruturas - + Category Categoria - + @@ -3828,7 +3823,7 @@ The default template is located at: - + Length @@ -3836,7 +3831,7 @@ The default template is located at: - + Width @@ -3845,157 +3840,157 @@ The default template is located at: - + Height Altura - + Parameters of the structure Parâmetros da estrutura - + Switch Length/Height Inverter comprimento e altura - + Switch Length/Width Inverter comprimento e largura - - + + This mesh is an invalid solid Esta malha não é um sólido válido - + Facemaker returned an error O FaceMaker retornou um erro - + Node Tools Ferramentas de nó - + Extends the nodes of this element to reach the nodes of another element Estende os nós deste elemento até os nós de um outro elemento - + Connects nodes of this element with the nodes of another element Conecta os nós deste elemento com os nós de um outro elemento - + Toggles all structural nodes of the document on/off Alternar todos os nós estruturais do documento - + Extrusion Tools Ferramentas de extrusão - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Escolha outro objeto de estrutura: - - + + The chosen object is not a Structure O objeto escolhido não é uma Estrutura. - - + + The chosen object has no structural nodes O objeto escolhido não possui nós estruturais - - + + One of these objects has more than 2 nodes Um desses objetos tem mais de 2 nós - - + + Unable to find a suitable intersection point Incapaz de encontrar um ponto de interseção adequado - + Intersection found. Interseção encontrada. - + Intersection found. Interseção encontrada. - + Done Feito @@ -4040,12 +4035,12 @@ The default template is located at: Criar perfil - + Profile Perfil - + Site Sítio @@ -4108,7 +4103,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Por favor, selecione um objeto de base - + Roof Telhado @@ -4179,7 +4174,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Frente - + External Reference Referência externa @@ -4347,7 +4342,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela A biblioteca de shapefile pode ser baixada da seguinte URL e instalada na sua pasta de macros: - + Window Janela @@ -4394,75 +4389,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Altura do peitoril - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Essa janela não tem abertura definida - - + + Get selected edge Usar a aresta selecionada - + Unable to create component Não é possível criar componente - + Window elements Elementos da janela - + Hole wire Arame para o furo - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire O número do arame que define um furo no objeto hospedeiro. Um valor de zero selecionará automaticamente o maior arame - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4472,7 +4467,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Remover @@ -4481,7 +4476,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Adicionar @@ -4497,38 +4492,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editar - + Base 2D object Objeto base 2D - - + + Wires Arames - + Components Componentes - + Name Nome - + Type Tipo @@ -4543,38 +4538,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Deslocamento - + Hinge Dobradiça - + Opening mode Modo de abertura - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Pressione para recuperar a aresta selecionada @@ -4620,7 +4615,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Gravado com sucesso - + Truss Treliça @@ -4675,17 +4670,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projeto - + Stairs Escada - + Railing Corrimão @@ -4695,12 +4690,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Criar Escada - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removidas propriedades 'OutlineWireLeft' e 'OutlineWireRight', e adicionadas propriedades 'RailingLeft' e 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' alteradas os tipos de propriedades 'RailingLeft' e 'RailingRight' @@ -5012,7 +5007,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5233,7 +5228,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unidade - + Schedule Agendar @@ -5466,7 +5461,7 @@ Floor creation aborted. Novo conjunto de propriedades - + Rebar Ferragem @@ -5482,7 +5477,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Seção @@ -5610,7 +5605,7 @@ Criação de edifício abortada. Criar o edifício - + Space Espaço @@ -5630,12 +5625,12 @@ Criação de edifício abortada. Limites do espaço - + Wall Parede - + Walls can only be based on Part or Mesh objects Paredes só podem basear-se em objetos de malha ou parte (peça) @@ -5693,22 +5688,22 @@ Criação de edifício abortada. Mesclar paredes - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction mudou 'Normal' para [0, 0, 1] para preservar a direção de extrusão - + Cannot compute blocks for wall Não e possível calcular blocos para esta parede - + Error: Unable to modify the base object of this wall Erro: Não foi possível modificar o objeto base desta parede - + Flip Direction Flip Direction @@ -5925,12 +5920,12 @@ Criação de edifício abortada. Arch_StructuresFromSelection - + Multiple Structures Múltiplas Estruturas - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5938,12 +5933,12 @@ Criação de edifício abortada. Arch_StructuralSystem - + Structural System Criar sistema estrutural - + Create a structural system from a selected structure and axis Criar um sistema estrutural para a estrutura e eixo selecionado @@ -5951,12 +5946,12 @@ Criação de edifício abortada. Arch_Structure - + Structure Estrutura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Criar uma estrutura do zero ou a partir de um objeto selecionado (esboço, linha, face ou sólido) @@ -5964,146 +5959,146 @@ Criação de edifício abortada. App::Property - - + + An optional extrusion path for this element Um caminho de extrusão opcional para este elemento - + The computed length of the extrusion path O comprimento calculado do caminho de extrusão - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distância inicial do offset no caminho de extrusão (valor positivo: extensão, negativo: redução) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distância final do offset no caminho de extrusão (valor positivo: extensão, negativo: redução) - + Automatically align the Base of the Structure perpendicular to the Tool axis Alinha automaticamente a Base da Estrutura perpendicular ao eixo da ferramenta - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Offset do eixo X entre a origem da base e o eixo da ferramenta (usar apenas se BasePerpendicularToTool for verdade) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Offset do eixo Y entre a origem da base e o eixo da ferramenta (usado apenas se BasePerpendicularToTool for Verdadeiro) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Espelha a Base ao longo do seu eixo Y (usado apenas se BasePerpendicularToTool for verdadeiro) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotação da Base em torno do eixo da ferramenta (usado somente se BasePerpendicularToTool for Verdadeiro) - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado em um perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado em um perfil - + The height or extrusion depth of this element. Keep 0 for automatic A profundidade ou altura de extrusão deste elemento. Mantenha 0 para automático - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The structural nodes of this element Os nós estruturais deste elemento - + A description of the standard profile this element is based upon Uma descrição do perfil padrão no qual este elemento é baseado - + Offset distance between the centerline and the nodes line A distância o eixo central e a linha de nós - + The facemaker type to use to build the profile of this object O tipo de gerador de faces a ser usado para construir o perfil deste objeto - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Arestas selecionadas (ou grupo de arestas) do ArchSketch, usadas para gerar a forma desta estrutura (em vez de usar todas as arestas da Base por padrão). Lista de índices de arestas ou grupos. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Se os nós estão visíveis ou não - + The width of the nodes line A largura da linha de nós - + The size of the node points O tamanho dos pontos de nó - + The color of the nodes line A cor da linha de nós - + The type of structural node O tipo de nó estrutural - + Axes systems this structure is built on Sistemas de eixos sobre os quais esta estrutura é construída - + The element numbers to exclude when this structure is based on axes Os números dos elementos a excluir quando essa estrutura for baseada em eixos - + If true the element are aligned with axes Se verdadeiro, os elementos estarão alinhados com os eixos @@ -6403,6 +6398,42 @@ Criação de edifício abortada. Thickness of the legs Espessura das pernas + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6840,7 +6871,7 @@ Criação de edifício abortada. Mostra símbolos de abertura em elevação se disponível - + The number of the wire that defines the hole. A value of 0 means automatic O número do arame que define o furo. Um valor de 0 significa automática @@ -7097,7 +7128,7 @@ Criação de edifício abortada. - + The overlap of the stringers above the bottom of the treads A distância das longarinas acima da base do degrau @@ -8235,7 +8266,7 @@ Criação de edifício abortada. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Usar os dados do ArchSketch (por exemplo, larguras, alinhamentos, deslocamentos) em vez das propriedades da parede @@ -8244,12 +8275,12 @@ Criação de edifício abortada. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Ferramentas de estrutura diff --git a/src/Mod/BIM/Resources/translations/Arch_ro.qm b/src/Mod/BIM/Resources/translations/Arch_ro.qm index c416616012..852bbed2aa 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ro.qm and b/src/Mod/BIM/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ro.ts b/src/Mod/BIM/Resources/translations/Arch_ro.ts index 46fc783a4d..48c4563fbb 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ro.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ro.ts @@ -3774,72 +3774,67 @@ The default template is located at: Arch - Structure - Structură - - - - + Beam Grindă - - + + Column Coloana - + StructuralSystem Sistem structural - + Create Structures From Selection Creează structuri din selecţie - + Create Structural System Creare sistem structural - - + + Create Structure Crează structură - + First point of the beam Primul punct al grinzii - + Base point of column Punctul de bază al coloanei - + Next point Următorul punct - + Structure options Opțiuni structură - + Category Categorie - + @@ -3849,7 +3844,7 @@ The default template is located at: - + Length @@ -3857,7 +3852,7 @@ The default template is located at: - + Width @@ -3866,157 +3861,157 @@ The default template is located at: - + Height Înălţime - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Această plasă este un solid nevalid - + Facemaker returned an error Facemaker a returnat o eroare - + Node Tools Unelte de modul - + Extends the nodes of this element to reach the nodes of another element Extinde nodurile acestui element pentru a ajunge la nodurile altui element - + Connects nodes of this element with the nodes of another element Conectează nodurile acestui element cu nodurile altui element - + Toggles all structural nodes of the document on/off Activează/dezactivează toate nodurile structurale ale documentului pornit/oprit - + Extrusion Tools Instrumente de extracție - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Alege alt obiect Structura: - - + + The chosen object is not a Structure Obiectul ales nu este o Structură - - + + The chosen object has no structural nodes Obiectul ales nu are noduri structurale - - + + One of these objects has more than 2 nodes Unul dintre aceste obiecte are mai mult de 2 noduri - - + + Unable to find a suitable intersection point Nu s-a putut găsi un punct potrivit de intersecție - + Intersection found. S-a găsit intersecția. - + Intersection found. S-a găsit intersecția. - + Done Gata @@ -4061,12 +4056,12 @@ The default template is located at: Crează profil - + Profile Profil - + Site Teren @@ -4129,7 +4124,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Selectați un obiect de bază - + Roof Acoperiș @@ -4200,7 +4195,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Din față - + External Reference Referință externă @@ -4368,7 +4363,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Biblioteca de forma poate fi descarcata de la urmatorul URL si instalata in folderul macro: - + Window Fereastră @@ -4415,75 +4410,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Înălțime de umplere - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Această fereastră nu are o deschidere definită - - + + Get selected edge Obține marginea selectată - + Unable to create component Imposibil de creat componenta - + Window elements Elemente fereastră - + Hole wire Gaura firului - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numărul de fir care defineşte o gaură în obiectul gazdă. O valoare de zero va adopta automat firul cel mai mare - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Elimină @@ -4502,7 +4497,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Adaugă @@ -4518,38 +4513,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Editare - + Base 2D object Obiectul 2D de bază - - + + Wires Fir - + Components Componente - + Name Nume - + Type Tip @@ -4564,38 +4559,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Compensare - + Hinge Balama - + Opening mode Mod de deschidere - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Apăsați pentru a prelua marginea selectată @@ -4641,7 +4636,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Scris cu succes - + Truss Adevărat @@ -4696,17 +4691,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Proiect - + Stairs Scări - + Railing Cale @@ -4716,12 +4711,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Crează scări - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' a eliminat proprietăți 'OutlineWireLeft' și 'OutlineWireright' și proprietăți adăugate 'RailingLeft' și 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' a schimbat tipul de proprietăți 'RailingLeft' și 'RailingRight' @@ -5033,7 +5028,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5254,7 +5249,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unitate - + Schedule Programare @@ -5495,7 +5490,7 @@ Crearea etajelor a fost întreruptă. Set nou de proprietăți - + Rebar Armatură @@ -5511,7 +5506,7 @@ Crearea etajelor a fost întreruptă. Select a base face on a structural object - + Section Secţiune @@ -5645,7 +5640,7 @@ Crearea de construcții a fost întreruptă. Creează o clădire - + Space Spaţiu @@ -5665,12 +5660,12 @@ Crearea de construcții a fost întreruptă. Limitele spațiului - + Wall Perete - + Walls can only be based on Part or Mesh objects Zidurile pot fi bazate numai pe obiecte Piesă sau Plasă @@ -5728,22 +5723,22 @@ Crearea de construcții a fost întreruptă. Îmbinare pereți - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Nu se pot calcula blocurile pentru perete - + Error: Unable to modify the base object of this wall Eroare: Nu se poate modifica obiectul de bază al acestui perete - + Flip Direction Flip Direction @@ -5960,12 +5955,12 @@ Crearea de construcții a fost întreruptă. Arch_StructuresFromSelection - + Multiple Structures Structuri multiple - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5973,12 +5968,12 @@ Crearea de construcții a fost întreruptă. Arch_StructuralSystem - + Structural System Sistem structural - + Create a structural system from a selected structure and axis Creează un sistem structural dintr-o structură selectată și o axă @@ -5986,12 +5981,12 @@ Crearea de construcții a fost întreruptă. Arch_Structure - + Structure Structură - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creează o structură de la zero sau de la un obiect selectat (schiță, cablu, față sau solid) @@ -5999,146 +5994,146 @@ Crearea de construcții a fost întreruptă. App::Property - - + + An optional extrusion path for this element O cale opțională de extrudare pentru acest element - + The computed length of the extrusion path Lungimea calculată a traiectoriei de extrudare - + Start offset distance along the extrusion path (positive: extend, negative: trim) Distanța de decalaj de-a lungul traseului de extrudare (pozitiv: extindere, negativ: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) Distanța de compensare de-a lungul traseului de extrudare (pozitiv: extindere, negativ: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Aliniere automată a bazei structurii perpendiculare pe axa sculei - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset între originea de bază și axa sculei (utilizată numai dacă BasePerpendicularTool este adevărat) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Decalaj Y între originea de bază și axa sculei (folosit numai dacă BasePerpendicularTool este adevărat) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Oglindiți baza de-a lungul axei Y (folosită numai dacă BasePerpendicularTool este adevărat) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Rotația de bază în jurul axei sculei (utilizată numai dacă BasePerpendicularTool este adevărat) - + The length of this element, if not based on a profile Lungimea acestui element, dacă nu este bazat pe un profil - + The width of this element, if not based on a profile Lățimea acestui element, dacă nu este bazat pe un profil - + The height or extrusion depth of this element. Keep 0 for automatic Înălțimea sau adâncimea de extrudare a acestui element. Păstrați 0 pentru automat - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Direcția normală de extrudare a acestui obiect (păstrează (0,0,0) pentru normalizare automată) - + The structural nodes of this element Nodurile structurale ale acestui element - + A description of the standard profile this element is based upon O descriere a profilului standard pe care acest element se bazează - + Offset distance between the centerline and the nodes line Compensează distanța dintre linia centrală și linia de noduri - + The facemaker type to use to build the profile of this object Tipul de facemaker folosit pentru a construi profilul acestui obiect - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Dacă nodurile sunt vizibile sau nu - + The width of the nodes line Lăţimea liniei de noduri - + The size of the node points Mărimea nodului - + The color of the nodes line Culoarea liniei de noduri - + The type of structural node Tipul nodului structural - + Axes systems this structure is built on Sisteme de axe pe care această structură este construită - + The element numbers to exclude when this structure is based on axes Numerele elementelor de exclus atunci când această structură este bazată pe axe - + If true the element are aligned with axes Dacă este adevărat, elementul este aliniat cu axele @@ -6438,6 +6433,42 @@ Crearea de construcții a fost întreruptă. Thickness of the legs Grosimea picioarelor + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6875,7 +6906,7 @@ Crearea de construcții a fost întreruptă. Arată simbolurile de deschidere a planului dacă este disponibil - + The number of the wire that defines the hole. A value of 0 means automatic Numărul de fir care definește gaura. O valoare de 0 înseamnă automat @@ -7132,7 +7163,7 @@ Crearea de construcții a fost întreruptă. - + The overlap of the stringers above the bottom of the treads Suprapunerea şirurilor de deasupra fundului benzii de rulare @@ -8270,7 +8301,7 @@ Crearea de construcții a fost întreruptă. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8279,12 +8310,12 @@ Crearea de construcții a fost întreruptă. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Unelte de structură diff --git a/src/Mod/BIM/Resources/translations/Arch_ru.qm b/src/Mod/BIM/Resources/translations/Arch_ru.qm index 4d73841e6b..668793303a 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_ru.qm and b/src/Mod/BIM/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_ru.ts b/src/Mod/BIM/Resources/translations/Arch_ru.ts index c39fcb6f2a..76dff5f7bc 100644 --- a/src/Mod/BIM/Resources/translations/Arch_ru.ts +++ b/src/Mod/BIM/Resources/translations/Arch_ru.ts @@ -16,7 +16,7 @@ BIM Material - BIM Material + Материал BIM @@ -3762,72 +3762,67 @@ The default template is located at: Arch - Structure - Структура - - - - + Beam Балка - - + + Column Колонна - + StructuralSystem Структурная система - + Create Structures From Selection Создать структуры из выделенного - + Create Structural System Создать структурную систему - - + + Create Structure Создать структуру - + First point of the beam Первая точка балки - + Base point of column Точка основания колонны - + Next point Следующая точка - + Structure options Параметры конструкции - + Category Категория - + @@ -3837,7 +3832,7 @@ The default template is located at: - + Length @@ -3845,7 +3840,7 @@ The default template is located at: - + Width @@ -3854,158 +3849,158 @@ The default template is located at: - + Height Высота - + Parameters of the structure Параметры структуры - + Switch Length/Height Переключить Длина/Высота - + Switch Length/Width Переключить Длина/Ширина - - + + This mesh is an invalid solid Эта сетка является недействительным телом - + Facemaker returned an error Генератор граней вернул ошибку - + Node Tools Инструменты узлов - + Extends the nodes of this element to reach the nodes of another element Расширяет узлы элемента для доступа к узлам другого элемента - + Connects nodes of this element with the nodes of another element Соединяет узлы элемента с узлами другого элемента - + Toggles all structural nodes of the document on/off Включает/выключает все структурные узлы документа - + Extrusion Tools Инструменты выдавливания - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Выберите другой объект структуры: - - + + The chosen object is not a Structure Выбранный объект не является структурой - - + + The chosen object has no structural nodes Выбранный объект не имеет структурных узлов - - + + One of these objects has more than 2 nodes Один из объектов имеет более 2-х узлов - - + + Unable to find a suitable intersection point Не удаётся найти подходящую точку пересечения - + Intersection found. Пересечение найдено. - + Intersection found. Пересечение найдено. - + Done Готово @@ -4050,12 +4045,12 @@ The default template is located at: Создать профиль - + Profile Профиль - + Site Местность @@ -4118,7 +4113,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Пожалуйста, выберите базовый объект - + Roof Крыша @@ -4189,7 +4184,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Спереди - + External Reference Внешняя ссылка @@ -4357,7 +4352,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile библиотека может быть загружена и установлена в папку макросов по следующему адресу: - + Window Окно @@ -4404,75 +4399,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Высота подоконника - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Это окно не имеет определённого проёма - - + + Get selected edge Выбрать край - + Unable to create component Невозможно создать компонент - + Window elements Элементы окна - + Hole wire Направляющая отверстия - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Число направляющих, которое определяет отверстие в основном объекте. При нулевом значении автоматически принимается самая большая направляющая - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4482,7 +4477,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Удалить @@ -4491,7 +4486,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Добавить @@ -4507,38 +4502,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Редактировать - + Base 2D object Базовый 2D-объект - - + + Wires Направляющие - + Components Компоненты - + Name Название - + Type Тип @@ -4553,38 +4548,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Смещение - + Hinge Петли - + Opening mode Способ открывания - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Нажмите, чтобы поставить выделенный край @@ -4630,7 +4625,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Успешно записано - + Truss Ферма @@ -4685,17 +4680,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Проект - + Stairs Лестница - + Railing Перила @@ -4705,12 +4700,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Добавить лестницу - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' удалены свойства OutlineWireLeft и OutlineWireRight и добавлены свойства RailingLeft и RailingRight - + changed the type of properties 'RailingLeft' and 'RailingRight' изменён тип свойств 'RailingLeft' и 'RailingRight' @@ -4805,7 +4800,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add Column - Add Column + Добавить столбец @@ -5022,7 +5017,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5243,7 +5238,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Единица измерения - + Schedule Опись @@ -5484,7 +5479,7 @@ Floor creation aborted. Новый набор свойств - + Rebar Арматура @@ -5500,7 +5495,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Разрез (Сечение) @@ -5634,7 +5629,7 @@ Building creation aborted. Создать Здание - + Space Пространство @@ -5654,12 +5649,12 @@ Building creation aborted. Границы зоны - + Wall Стена - + Walls can only be based on Part or Mesh objects Стены могут основываться только на объектах Part или Mesh @@ -5717,22 +5712,22 @@ Building creation aborted. Объединить стенки - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction изменено «Normal» на [0, 0, 1] для сохранения направления выдавливания - + Cannot compute blocks for wall Не удается вычислить блоки для стен - + Error: Unable to modify the base object of this wall Ошибка: Не удается изменить базовый объект этой стены - + Flip Direction Flip Direction @@ -5949,12 +5944,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Множество структур - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5962,12 +5957,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Конструктивная система - + Create a structural system from a selected structure and axis Создайте структурную систему из выбранной конструкции и оси @@ -5975,12 +5970,12 @@ Building creation aborted. Arch_Structure - + Structure Структура - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Создает структуру с нуля или из выбранного объекта (эскиза, проволоки, грани или твердого тела) @@ -5988,146 +5983,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element Необязательный путь выдавливания для этого элемента - + The computed length of the extrusion path Расчетная длина пути выдавливания - + Start offset distance along the extrusion path (positive: extend, negative: trim) Начало смещения вдоль пути выдавливания (положительное: длиннее, отрицательное: короче) - + End offset distance along the extrusion path (positive: extend, negative: trim) Расстояние конечного смещения вдоль траектории выдавливания (положительное значение: удлинение, отрицательное значение: обрезка) - + Automatically align the Base of the Structure perpendicular to the Tool axis Автоматически выравнивать основание конструкции перпендикулярно оси инструмента - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Смещение по оси X между базовой базой и осью инструмента (используется, только если BasePerpendicularToTool равен True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Смещение по оси Y между базовой базой и осью инструмента (используется, только если BasePerpendicularToTool равен True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Зеркальное отображение базы по оси Y (используется только если BasePerpendicularToTool равен True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Вращение базы вокруг оси инструмента (используется только если BasePerpendicularToTool равен True) - + The length of this element, if not based on a profile Длина элемента, если не определена в профиле - + The width of this element, if not based on a profile Ширина элемента, если она не определена в профиле - + The height or extrusion depth of this element. Keep 0 for automatic Высота или глубина выдавливания элемента. Задайте 0 для автоматического определения - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Нормальное направление выдавливания для этого объекта (оставить (0,0,0) для задания автоматической нормали) - + The structural nodes of this element Структурные узлы этого элемента - + A description of the standard profile this element is based upon Описание стандартного профиля, на котором основан элемент - + Offset distance between the centerline and the nodes line Расстояние смещения между осевой и узловой линией - + The facemaker type to use to build the profile of this object Facemaker тип, используемый для построения профиля объекта - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Выбранные края (или группа краев) основного ArchSketch, для создания формы этой арки (вместо использования по умолчанию всех краев базовой фигуры). Введенные данные - это число краев или групп. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Выберите пользовательский определенный набор свойств для использования при создании формы варианта, с тем же архивированием - + If the nodes are visible or not Видны ли узлы или нет - + The width of the nodes line Ширина узловых линий - + The size of the node points Размер узловых точек - + The color of the nodes line Цвет линии узлов - + The type of structural node Тип конструкционного узла - + Axes systems this structure is built on Структура системы осей построена на - + The element numbers to exclude when this structure is based on axes Число исключающихся элементов при построении структуры на осях - + If true the element are aligned with axes Если истина, элемент выравнивается по осям @@ -6427,6 +6422,42 @@ Building creation aborted. Thickness of the legs Толщина стержней + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6864,7 +6895,7 @@ Building creation aborted. Показать символы показа фасада, если они доступны - + The number of the wire that defines the hole. A value of 0 means automatic Номер направляющей, определяющей отверстие. Значение 0 означает автоматическое @@ -7121,7 +7152,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads Нахлест несущих по низу ступеней @@ -8259,7 +8290,7 @@ Building creation aborted. Выберите пользовательский определенный набор свойств для использования при создании формы варианта, слои стены, с тем же архивированием - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Использовать данные Base ArchSketch (если используются) (например, ширину, выравнивание, смещения) вместо свойств стены @@ -8268,12 +8299,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Инструменты конструкции diff --git a/src/Mod/BIM/Resources/translations/Arch_sl.qm b/src/Mod/BIM/Resources/translations/Arch_sl.qm index 1d8448512c..47f6c7efb9 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_sl.qm and b/src/Mod/BIM/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_sl.ts b/src/Mod/BIM/Resources/translations/Arch_sl.ts index 05dffa08b0..ea436c9f08 100644 --- a/src/Mod/BIM/Resources/translations/Arch_sl.ts +++ b/src/Mod/BIM/Resources/translations/Arch_sl.ts @@ -3774,72 +3774,67 @@ The default template is located at: Arch - Structure - Konstrukcija - - - - + Beam Nosilec - - + + Column Steber - + StructuralSystem Konstrukcijski sistem - + Create Structures From Selection Ustvari konstrukcije iz izbora - + Create Structural System Ustvari konstrukcijski sklop - - + + Create Structure Ustvari konstrukcijo - + First point of the beam Prva točka nosilca - + Base point of column Izhodišče stebra - + Next point Naslednja točka - + Structure options Možnosti konstrukcije - + Category Skupina - + @@ -3849,7 +3844,7 @@ The default template is located at: - + Length @@ -3857,7 +3852,7 @@ The default template is located at: - + Width @@ -3866,158 +3861,158 @@ The default template is located at: - + Height Višina - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid To ploskovje ni veljavno telo - + Facemaker returned an error Ploskovnik je vrnil napako - + Node Tools Orodja vozlišč - + Extends the nodes of this element to reach the nodes of another element Podaljša oglišča tega gradnika do oglišč drugega gradnika - + Connects nodes of this element with the nodes of another element Stakne oglišča tega predmeta z oglišči drugega predmeta - + Toggles all structural nodes of the document on/off Vklaplja/izklaplja vsa konstrukcijska vozlišča dokumenta - + Extrusion Tools Izrivalna orodja - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Izberite drugi konstrukcijski predmet: - - + + The chosen object is not a Structure Izbran predmet ni konstrukcija - - + + The chosen object has no structural nodes Izbrani predmet nima konstrukcijskih vozlišč - - + + One of these objects has more than 2 nodes Eden od predmetov ima več kot 2 vozlišči - - + + Unable to find a suitable intersection point Ni mogoče najti primernega presečišča - + Intersection found. Presečišče najdeno. - + Intersection found. Presečišče najdeno. - + Done Končano @@ -4062,12 +4057,12 @@ The default template is located at: Ustvari presek - + Profile Profil - + Site Lokacija @@ -4130,7 +4125,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Izberite osnovni objekt - + Roof Streha @@ -4201,7 +4196,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Spredaj - + External Reference Zunanji sklic @@ -4369,7 +4364,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Knjižnico z oblikovnimi (shape) datotekami je mogoče prenesti s sledečga naslova in namestiti v vašo mapo z makri: - + Window Okno @@ -4416,75 +4411,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Višina okenske police - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening To okno nima določenega odpiranja - - + + Get selected edge Dobi izbrani rob - + Unable to create component Sestavine ni mogoče ustvariti - + Window elements Deli oken - + Hole wire Črtovje preboja - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Številka črtovja, ki določa preboj v gostuječem predmetu. Pri vrednosti nič bo samodejno upoštevano največje črtovje - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4494,7 +4489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Odstrani @@ -4503,7 +4498,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -4519,38 +4514,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Uredi - + Base 2D object Izhodiščni 2D predmet - - + + Wires Črtovja - + Components Sestavine - + Name Ime - + Type Vrsta @@ -4565,38 +4560,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Odmik - + Hinge Tečaj - + Opening mode Način odpiranja - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Pritisnite da povrnete izbrani rob @@ -4642,7 +4637,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Uspešno zapisano - + Truss Paličje @@ -4697,17 +4692,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Stopnice - + Railing Ograja @@ -4717,12 +4712,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ustvari stopnišče - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' odstranjeni lastnosti Zunanji levi obris "OutlineWireLeft" in Zunanji desni obris "OutlineWireRight" ter dodani lastnosti Leva ograja "RailingLeft" in Desna ograja "RailingRight" - + changed the type of properties 'RailingLeft' and 'RailingRight' spremenjna vrsta lastnosti Leva ograja "RailingLeft" in Desna ograja "RailingRight" @@ -5034,7 +5029,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5255,7 +5250,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Enota - + Schedule Popis @@ -5496,7 +5491,7 @@ Ustvarjanje etaže prekinjeno. Nov nabor lastnosti - + Rebar Armaturna palica @@ -5512,7 +5507,7 @@ Ustvarjanje etaže prekinjeno. Select a base face on a structural object - + Section Presek @@ -5644,7 +5639,7 @@ Ustvarjanj stavbe prekinjeno. Ustvari stavbo - + Space Prostor @@ -5664,12 +5659,12 @@ Ustvarjanj stavbe prekinjeno. Meje prostora - + Wall Stena - + Walls can only be based on Part or Mesh objects Stene so lahko osnovane le na delih (part) ali ploskovjih @@ -5727,22 +5722,22 @@ Ustvarjanj stavbe prekinjeno. Združi stene - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Ni mogoče izračunavati zidakov za steno - + Error: Unable to modify the base object of this wall Napaka: preoblikovanje tlorisa tega zidu ni mogoče - + Flip Direction Flip Direction @@ -5959,12 +5954,12 @@ Ustvarjanj stavbe prekinjeno. Arch_StructuresFromSelection - + Multiple Structures Več konstrukcij - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5972,12 +5967,12 @@ Ustvarjanj stavbe prekinjeno. Arch_StructuralSystem - + Structural System Konstrukcijski sklop - + Create a structural system from a selected structure and axis Ustvari konstrukcijski sklop iz izbrane konstrukcije in osi @@ -5985,12 +5980,12 @@ Ustvarjanj stavbe prekinjeno. Arch_Structure - + Structure Konstrukcija - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Ustvari konstrukcijo od začetka ali iz izbranega predmeta (očrta, črtovja, ploskve ali telesa) @@ -5998,146 +5993,146 @@ Ustvarjanj stavbe prekinjeno. App::Property - - + + An optional extrusion path for this element Neobvezna pot izrivanja te prvine - + The computed length of the extrusion path Izračunana dolžina poti izrivanja - + Start offset distance along the extrusion path (positive: extend, negative: trim) Razdalja začetnega zamika vzdolž poti izrivanja (pozitivno: podaljša, negativno: skrajša) - + End offset distance along the extrusion path (positive: extend, negative: trim) Razdalja končnega zamika vzdolž poti izrivanja (pozitivno: podaljša, negativno: skrajša) - + Automatically align the Base of the Structure perpendicular to the Tool axis Samodejna naravnaj osnovo konstrukcije pravokotno na os orodja - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X zamik izhodišča osnove od osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y zamik izhodišča osnove od osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Prezrcali osnovo skozi njeno os Y (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Sukanje osnove okoli osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + The length of this element, if not based on a profile Dolžina tega gradnika, če ne izhaja iz preseka - + The width of this element, if not based on a profile Širina tega gradnika, če ne izhaja iz preseka - + The height or extrusion depth of this element. Keep 0 for automatic Višina oziroma globina izriva tega gradnika. Pustite 0 za samodejnost - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normala smeri izrivanja tega predmeta (pustite (0,0,0) za samodejno smer) - + The structural nodes of this element Konstrukcijska vozlišča tega gradnika - + A description of the standard profile this element is based upon Opis standardnega preseka, na katerem je osnovan ta gradnik - + Offset distance between the centerline and the nodes line Odmik med središčnico in vozliščno črto - + The facemaker type to use to build the profile of this object Vrsta "facemaker" uporabljena za izgradnjo profila predmeta - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Če so vozlišča vidna ali ne - + The width of the nodes line Debelina črte vozlišča - + The size of the node points Velikost točk vozlišča - + The color of the nodes line Barva vozliščne črte - + The type of structural node Vrsta konstrukcijskega vozlišča - + Axes systems this structure is built on Osni sistem, ki je osnova te konstrukcije - + The element numbers to exclude when this structure is based on axes Neupoštevane številke gradnika, ko je ta konstrukcija izhaja iz osi - + If true the element are aligned with axes Če drži, so gradniki poravnani z osjo @@ -6437,6 +6432,42 @@ Ustvarjanj stavbe prekinjeno. Thickness of the legs Debelina krakov + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6874,7 +6905,7 @@ Ustvarjanj stavbe prekinjeno. Prikazovanje oznak odprtin v pogledu, če so te razpoložljive - + The number of the wire that defines the hole. A value of 0 means automatic Število črtovij, ki določajo preboj. Če je 0, se vrednost samodejno izračuna @@ -7131,7 +7162,7 @@ Ustvarjanj stavbe prekinjeno. - + The overlap of the stringers above the bottom of the treads Prekrivanje nosilcev preko dna nastopnic @@ -8269,7 +8300,7 @@ Ustvarjanj stavbe prekinjeno. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8278,12 +8309,12 @@ Ustvarjanj stavbe prekinjeno. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Konstrukcijska orodja diff --git a/src/Mod/BIM/Resources/translations/Arch_sr-CS.qm b/src/Mod/BIM/Resources/translations/Arch_sr-CS.qm index f3fd76b3e0..6383b3aab0 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_sr-CS.qm and b/src/Mod/BIM/Resources/translations/Arch_sr-CS.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_sr-CS.ts b/src/Mod/BIM/Resources/translations/Arch_sr-CS.ts index 5739429566..aec84818ab 100644 --- a/src/Mod/BIM/Resources/translations/Arch_sr-CS.ts +++ b/src/Mod/BIM/Resources/translations/Arch_sr-CS.ts @@ -3774,72 +3774,67 @@ The default template is located at: Arch - Structure - Struktura - - - - + Beam Greda - - + + Column Stub - + StructuralSystem Strukturni sistem - + Create Structures From Selection Create Structures From Selection - + Create Structural System Create Structural System - - + + Create Structure Create Structure - + First point of the beam First point of the beam - + Base point of column Base point of column - + Next point Sledeća tačka - + Structure options Structure options - + Category Kategorija - + @@ -3849,7 +3844,7 @@ The default template is located at: - + Length @@ -3857,7 +3852,7 @@ The default template is located at: - + Width @@ -3866,158 +3861,158 @@ The default template is located at: - + Height Visina - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid This mesh is an invalid solid - + Facemaker returned an error Tvorac stranica je vratio grešku - + Node Tools Node Tools - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choose another Structure object: - - + + The chosen object is not a Structure The chosen object is not a Structure - - + + The chosen object has no structural nodes The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + Intersection found. Intersection found. - + Done Gotovo @@ -4062,12 +4057,12 @@ The default template is located at: Napravi profil - + Profile Presek - + Site Gradilište @@ -4130,7 +4125,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Krov @@ -4201,7 +4196,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Spreda - + External Reference Spoljašnji objekat @@ -4369,7 +4364,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Prozor @@ -4416,75 +4411,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4494,7 +4489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Ukloni @@ -4503,7 +4498,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Dodaj @@ -4519,38 +4514,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Uredi - + Base 2D object Base 2D object - - + + Wires Wires - + Components Komponente - + Name Ime - + Type Vrsta @@ -4565,38 +4560,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Odmak - + Hinge Šarka - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4642,7 +4637,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Rešetkasti krovni nosač @@ -4697,17 +4692,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekat - + Stairs Stepenište - + Railing Railing @@ -4717,12 +4712,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Napravi stepenište - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5034,7 +5029,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5255,7 +5250,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Merna jedinica - + Schedule Raspoređivanje podataka @@ -5496,7 +5491,7 @@ Floor creation aborted. New property set - + Rebar Armatura @@ -5512,7 +5507,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Presek @@ -5646,7 +5641,7 @@ Building creation aborted. Create Building - + Space Prostor @@ -5666,12 +5661,12 @@ Building creation aborted. Space boundaries - + Wall Zid - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5729,22 +5724,22 @@ Building creation aborted. Spoji zidove - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction da bi se sačuvao pravac ekstruzije 'Normala' promenjena u [0, 0, 1] - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5961,12 +5956,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Više struktura - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5974,12 +5969,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Strukturni sistem - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5987,12 +5982,12 @@ Building creation aborted. Arch_Structure - + Structure Struktura - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -6000,146 +5995,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object Vrsta tvorca stranica koja će se koristiti za pravljenje profila ovog objekta - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6439,6 +6434,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6876,7 +6907,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7133,7 +7164,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8271,7 +8302,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8280,12 +8311,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Alatke za strukture diff --git a/src/Mod/BIM/Resources/translations/Arch_sr.qm b/src/Mod/BIM/Resources/translations/Arch_sr.qm index ccf58ddf41..67ac3f5489 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_sr.qm and b/src/Mod/BIM/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_sr.ts b/src/Mod/BIM/Resources/translations/Arch_sr.ts index 85eadb075d..b664e0c7cd 100644 --- a/src/Mod/BIM/Resources/translations/Arch_sr.ts +++ b/src/Mod/BIM/Resources/translations/Arch_sr.ts @@ -3774,72 +3774,67 @@ The default template is located at: Arch - Structure - Структура - - - - + Beam Греда - - + + Column Стуб - + StructuralSystem Cтруктурни Cиcтем - + Create Structures From Selection Create Structures From Selection - + Create Structural System Create Structural System - - + + Create Structure Create Structure - + First point of the beam First point of the beam - + Base point of column Base point of column - + Next point Следећа тачка - + Structure options Structure options - + Category Категорија - + @@ -3849,7 +3844,7 @@ The default template is located at: - + Length @@ -3857,7 +3852,7 @@ The default template is located at: - + Width @@ -3866,158 +3861,158 @@ The default template is located at: - + Height Висина - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid This mesh is an invalid solid - + Facemaker returned an error Творац страница је вратио грешку - + Node Tools Node Tools - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Choose another Structure object: - - + + The chosen object is not a Structure The chosen object is not a Structure - - + + The chosen object has no structural nodes The chosen object has no structural nodes - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Intersection found. - + Intersection found. Intersection found. - + Done Готово @@ -4062,12 +4057,12 @@ The default template is located at: Направи профил - + Profile Профил - + Site Градилиште @@ -4130,7 +4125,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Кров @@ -4201,7 +4196,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Спреда - + External Reference Спољашњи објекат @@ -4369,7 +4364,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Прозор @@ -4416,75 +4411,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4494,7 +4489,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Уклони @@ -4503,7 +4498,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Додај @@ -4519,38 +4514,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Уреди - + Base 2D object Base 2D object - - + + Wires Wires - + Components Компоненте - + Name Име - + Type Врста @@ -4565,38 +4560,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Одмак - + Hinge Шарка - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4642,7 +4637,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Решеткасти кровни носач @@ -4697,17 +4692,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Пројекат - + Stairs Степениште - + Railing Railing @@ -4717,12 +4712,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Направи степениште - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5034,7 +5029,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5255,7 +5250,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Мерна јединица - + Schedule Распоређивање података @@ -5496,7 +5491,7 @@ Floor creation aborted. New property set - + Rebar Арматура @@ -5512,7 +5507,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Пресек @@ -5646,7 +5641,7 @@ Building creation aborted. Create Building - + Space Простор @@ -5666,12 +5661,12 @@ Building creation aborted. Space boundaries - + Wall Зид - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5729,22 +5724,22 @@ Building creation aborted. Споји зидове - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction да би се сачувао правац екструзије 'Нормала' промењена у [0, 0, 1] - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5961,12 +5956,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Више структура - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5974,12 +5969,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Cтруктурни Cиcтем - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5987,12 +5982,12 @@ Building creation aborted. Arch_Structure - + Structure Структура - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -6000,146 +5995,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object Врста творца страница која ће се користити за прављење профила овог објекта - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6439,6 +6434,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6876,7 +6907,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7133,7 +7164,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8271,7 +8302,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8280,12 +8311,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Алатке за структуре diff --git a/src/Mod/BIM/Resources/translations/Arch_sv-SE.qm b/src/Mod/BIM/Resources/translations/Arch_sv-SE.qm index faedef5293..168c294885 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_sv-SE.qm and b/src/Mod/BIM/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_sv-SE.ts b/src/Mod/BIM/Resources/translations/Arch_sv-SE.ts index a3e2cd654a..c7b77fecb0 100644 --- a/src/Mod/BIM/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/BIM/Resources/translations/Arch_sv-SE.ts @@ -3773,72 +3773,67 @@ The default template is located at: Arch - Structure - Struktur - - - - + Beam Balk - - + + Column Kolumn - + StructuralSystem Strukturellt system - + Create Structures From Selection Skapa strukturer från urval - + Create Structural System Skapa strukturellt system - - + + Create Structure Skapa struktur - + First point of the beam Balkens första punkt - + Base point of column Baspunkt för kolumn - + Next point Nästa punkt - + Structure options Strukturalternativ - + Category Kategori - + @@ -3848,7 +3843,7 @@ The default template is located at: - + Length @@ -3856,7 +3851,7 @@ The default template is located at: - + Width @@ -3865,158 +3860,158 @@ The default template is located at: - + Height Höjd - + Parameters of the structure Parametrar för strukturen - + Switch Length/Height Brytarens längd/höjd - + Switch Length/Width Brytarens längd/bredd - - + + This mesh is an invalid solid Detta nät är en ogiltig solid - + Facemaker returned an error Facemaker returnerade ett fel - + Node Tools Nodverktyg - + Extends the nodes of this element to reach the nodes of another element Förlänger noderna i detta element för att nå noderna i ett annat element - + Connects nodes of this element with the nodes of another element Kopplar samman noder i detta element med noder i ett annat element - + Toggles all structural nodes of the document on/off Slår på/av alla strukturella noder i dokumentet - + Extrusion Tools Verktyg för extrudering - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Välj ett annat strukturobjekt: - - + + The chosen object is not a Structure Det valda objektet är inte en struktur - - + + The chosen object has no structural nodes Det valda objektet har inga strukturella noder - - + + One of these objects has more than 2 nodes Ett av dessa objekt har fler än 2 noder - - + + Unable to find a suitable intersection point Det går inte att hitta en lämplig korsningspunkt - + Intersection found. Gatukorsning hittades. - + Intersection found. Korsning hittad. - + Done Färdig @@ -4061,12 +4056,12 @@ The default template is located at: Skapa profil - + Profile Profil - + Site Plats @@ -4129,7 +4124,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Vänligen välj ett basobjekt - + Roof Tak @@ -4200,7 +4195,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Front - + External Reference Extern referens @@ -4368,7 +4363,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile-biblioteket kan laddas ner från följande URL och installeras i din macros-mapp: - + Window Fönster @@ -4415,75 +4410,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Höjd på tröskel - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Det här fönstret har ingen definierad öppning - - + + Get selected edge Hämta markerad kant - + Unable to create component Kunde inte skapa komponent - + Window elements Fönsterelement - + Hole wire Håltråd - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Numret på den tråd som definierar ett hål i värdobjektet. Ett värde på noll kommer automatiskt att anta den största tråden - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Ta bort @@ -4502,7 +4497,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Lägg till @@ -4518,38 +4513,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Redigera - + Base 2D object Bas 2D-objekt - - + + Wires Trådar - + Components Komponenter - + Name Namn - + Type Typ @@ -4564,38 +4559,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Offset - + Hinge Gångjärn - + Opening mode Öppningsläge - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Tryck för att hämta den valda kanten @@ -4641,7 +4636,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Framgångsrikt skriven - + Truss Fackverk @@ -4696,17 +4691,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Projekt - + Stairs Trappa - + Railing Räcke @@ -4716,12 +4711,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Skapa trappor - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' tog bort egenskaperna 'OutlineWireLeft' och 'OutlineWireRight' och lade till egenskaperna 'RailingLeft' och 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' ändrade typen av egenskaper 'RailingLeft' och 'RailingRight' @@ -5033,7 +5028,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5254,7 +5249,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Enhet - + Schedule Schema @@ -5495,7 +5490,7 @@ Skapandet av våningen avbröts. Nya fastigheter - + Rebar armeringsjärn @@ -5511,7 +5506,7 @@ Skapandet av våningen avbröts. Select a base face on a structural object - + Section Sektionering @@ -5645,7 +5640,7 @@ Skapandet av byggnaden avbröts. Skapa byggnad - + Space Utrymme @@ -5665,12 +5660,12 @@ Skapandet av byggnaden avbröts. Utrymmets gränser - + Wall Vägg - + Walls can only be based on Part or Mesh objects Väggar kan endast baseras på Part- eller Mesh-objekt @@ -5728,22 +5723,22 @@ Skapandet av byggnaden avbröts. Sammanfoga väggar - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction ändrade 'Normal' till [0, 0, 1] för att bibehålla extruderingsriktningen - + Cannot compute blocks for wall Det går inte att beräkna block för vägg - + Error: Unable to modify the base object of this wall Felmeddelande: Det går inte att modifiera basobjektet för denna vägg - + Flip Direction Flip Direction @@ -5960,12 +5955,12 @@ Skapandet av byggnaden avbröts. Arch_StructuresFromSelection - + Multiple Structures Flera strukturer - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5973,12 +5968,12 @@ Skapandet av byggnaden avbröts. Arch_StructuralSystem - + Structural System Strukturellt system - + Create a structural system from a selected structure and axis Skapa ett strukturellt system från en vald struktur och axel @@ -5986,12 +5981,12 @@ Skapandet av byggnaden avbröts. Arch_Structure - + Structure Struktur - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Skapar en struktur från grunden eller från ett utvalt objekt (skiss, tråd, yta eller solid) @@ -5999,146 +5994,146 @@ Skapandet av byggnaden avbröts. App::Property - - + + An optional extrusion path for this element En valfri extruderingsväg för detta element - + The computed length of the extrusion path Den beräknade längden på extruderingsbanan - + Start offset distance along the extrusion path (positive: extend, negative: trim) Startförskjutningsavstånd längs extruderingsbanan (positivt: förlänga, negativt: minska) - + End offset distance along the extrusion path (positive: extend, negative: trim) Slutförskjutningsavstånd längs extruderingsbanan (positivt: förlänga, negativt: minska) - + Automatically align the Base of the Structure perpendicular to the Tool axis Rikta automatiskt in strukturens bas vinkelrätt mot verktygsaxeln - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X-offset mellan basens ursprung och verktygets axel (används endast om BasePerpendicularToTool är True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y-offset mellan basens ursprung och verktygets axel (används endast om BasePerpendicularToTool är True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Spegla basen längs dess Y-axel (används endast om BasePerpendicularToTool är True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Basrotation runt verktygsaxeln (används endast om BasePerpendicularToTool är True) - + The length of this element, if not based on a profile Längden på detta element, om det inte baseras på en profil - + The width of this element, if not based on a profile Bredden på detta element, om det inte är baserat på en profil - + The height or extrusion depth of this element. Keep 0 for automatic Höjden eller extruderingsdjupet för detta element. Behåll 0 för automatisk - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Den normala extruderingsriktningen för detta objekt (behåll (0,0,0) för automatisk normal) - + The structural nodes of this element De strukturella noderna för detta element - + A description of the standard profile this element is based upon En beskrivning av den standardprofil som detta element är baserat på - + Offset distance between the centerline and the nodes line Offset-avstånd mellan mittlinjen och nodlinjen - + The facemaker type to use to build the profile of this object Den facemaker-typ som ska användas för att bygga upp profilen för detta objekt - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Valda kanter (eller grupp av kanter) på ArchSketch-basen, som ska användas för att skapa formen på denna BIM-struktur (istället för att använda alla kanter på basformen som standard). Inmatning är indexnummer för kanter eller grupper. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Välj användardefinierad egenskapsuppsättning som ska användas för att skapa en variantform med samma ArchSketch - + If the nodes are visible or not Om noderna är synliga eller inte - + The width of the nodes line Bredden på nodernas linje - + The size of the node points Storleken på nodpunkterna - + The color of the nodes line Färgen på nodernas linje - + The type of structural node Typ av strukturell nod - + Axes systems this structure is built on Axelsystem som denna struktur är byggd på - + The element numbers to exclude when this structure is based on axes Elementnummer som ska uteslutas när denna struktur är baserad på axlar - + If true the element are aligned with axes Om sant är elementet inriktat mot axlarna @@ -6438,6 +6433,42 @@ Skapandet av byggnaden avbröts. Thickness of the legs Tjocklek på benen + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6875,7 +6906,7 @@ Skapandet av byggnaden avbröts. Visa öppningssymboler på höjden om sådana finns - + The number of the wire that defines the hole. A value of 0 means automatic Numret på den tråd som definierar hålet. Ett värde på 0 innebär automatisk @@ -7132,7 +7163,7 @@ Skapandet av byggnaden avbröts. - + The overlap of the stringers above the bottom of the treads Överlappningen av vangstyckena ovanför fotstegens nederkant @@ -8270,7 +8301,7 @@ Skapandet av byggnaden avbröts. Välj användardefinierad PropertySet som ska användas för att skapa variantform, lager av bågväggen med samma ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Använd data från Base ArchSketch (om sådan används) (t.ex. bredder, inriktningar, förskjutningar) i stället för väggens egenskaper @@ -8279,12 +8310,12 @@ Skapandet av byggnaden avbröts. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Strukturverktyg diff --git a/src/Mod/BIM/Resources/translations/Arch_tr.qm b/src/Mod/BIM/Resources/translations/Arch_tr.qm index acb8295031..262a05733e 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_tr.qm and b/src/Mod/BIM/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_tr.ts b/src/Mod/BIM/Resources/translations/Arch_tr.ts index e575ed8b9a..26a1528e02 100644 --- a/src/Mod/BIM/Resources/translations/Arch_tr.ts +++ b/src/Mod/BIM/Resources/translations/Arch_tr.ts @@ -3773,72 +3773,67 @@ The default template is located at: Arch - Structure - Yapı - - - - + Beam Işın - - + + Column Kolon - + StructuralSystem StructuralSystem - + Create Structures From Selection Seçimden Yapılar Oluşturun - + Create Structural System Yapısal sistemi oluştur - - + + Create Structure Yapı Oluştur - + First point of the beam Işının ilk noktası - + Base point of column Bir kolonun temel noktası - + Next point Bir sonraki nokta - + Structure options Yapısal seçenekler - + Category Kategori - + @@ -3848,7 +3843,7 @@ The default template is located at: - + Length @@ -3856,7 +3851,7 @@ The default template is located at: - + Width @@ -3865,158 +3860,158 @@ The default template is located at: - + Height Yükseklik - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Bu kafes hatalı bir katıdır - + Facemaker returned an error Facemaker bir hata döndürdü - + Node Tools Düğüm araçları - + Extends the nodes of this element to reach the nodes of another element Extends the nodes of this element to reach the nodes of another element - + Connects nodes of this element with the nodes of another element Connects nodes of this element with the nodes of another element - + Toggles all structural nodes of the document on/off Toggles all structural nodes of the document on/off - + Extrusion Tools Extrusion Tools - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Başka bir Yapı nesnesi seçin: - - + + The chosen object is not a Structure Seçilen nesne bir Yapı değildir - - + + The chosen object has no structural nodes Seçilen nesnenin yapısal düğümleri yok - - + + One of these objects has more than 2 nodes One of these objects has more than 2 nodes - - + + Unable to find a suitable intersection point Unable to find a suitable intersection point - + Intersection found. Kesişim bulundu. - + Intersection found. Kesişim bulundu. - + Done Bitti @@ -4061,12 +4056,12 @@ The default template is located at: Create Profile - + Profile Yan görünüm - + Site Alan @@ -4129,7 +4124,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select a base object - + Roof Roof @@ -4200,7 +4195,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ön - + External Reference External Reference @@ -4368,7 +4363,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela The shapefile library can be downloaded from the following URL and installed in your macros folder: - + Window Pencere @@ -4415,75 +4410,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Sill height - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening This window has no defined opening - - + + Get selected edge Get selected edge - + Unable to create component Unable to create component - + Window elements Window elements - + Hole wire Hole wire - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Kaldır @@ -4502,7 +4497,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Ekle @@ -4518,38 +4513,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Düzenle - + Base 2D object Base 2D object - - + + Wires Wires - + Components Bileşenler - + Name Isim - + Type Türü @@ -4564,38 +4559,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Uzaklaşma - + Hinge Hinge - + Opening mode Opening mode - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Press to retrieve the selected edge @@ -4641,7 +4636,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Successfully written - + Truss Truss @@ -4696,17 +4691,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Proje - + Stairs Merdivenler - + Railing Railing @@ -4716,12 +4711,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Stairs - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' changed the type of properties 'RailingLeft' and 'RailingRight' @@ -5033,7 +5028,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5254,7 +5249,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Birim - + Schedule Schedule @@ -5495,7 +5490,7 @@ Floor creation aborted. New property set - + Rebar İnşaat demiri @@ -5511,7 +5506,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Kesişim @@ -5645,7 +5640,7 @@ Building creation aborted. Create Building - + Space Uzay, Boşluk, Alan @@ -5665,12 +5660,12 @@ Building creation aborted. Space boundaries - + Wall Wall - + Walls can only be based on Part or Mesh objects Walls can only be based on Part or Mesh objects @@ -5728,22 +5723,22 @@ Building creation aborted. Merge Walls - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Cannot compute blocks for wall - + Error: Unable to modify the base object of this wall Error: Unable to modify the base object of this wall - + Flip Direction Flip Direction @@ -5960,12 +5955,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Multiple Structures - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5973,12 +5968,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Structural System - + Create a structural system from a selected structure and axis Create a structural system from a selected structure and axis @@ -5986,12 +5981,12 @@ Building creation aborted. Arch_Structure - + Structure Yapı - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Creates a structure from scratch or from a selected object (sketch, wire, face or solid) @@ -5999,146 +5994,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) End offset distance along the extrusion path (positive: extend, negative: trim) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6438,6 +6433,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6875,7 +6906,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7132,7 +7163,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8270,7 +8301,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8279,12 +8310,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_uk.qm b/src/Mod/BIM/Resources/translations/Arch_uk.qm index 17525cb038..4df99a752b 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_uk.qm and b/src/Mod/BIM/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_uk.ts b/src/Mod/BIM/Resources/translations/Arch_uk.ts index ea665940b1..f57ef222a3 100644 --- a/src/Mod/BIM/Resources/translations/Arch_uk.ts +++ b/src/Mod/BIM/Resources/translations/Arch_uk.ts @@ -3783,72 +3783,67 @@ The default template is located at: Arch - Structure - Структура - - - - + Beam Промінь - - + + Column Колонка - + StructuralSystem Структура системи - + Create Structures From Selection Створити Структуру з обраного - + Create Structural System Створити структурну систему - - + + Create Structure Створити структуру - + First point of the beam Перша точка балки - + Base point of column Базова точка колони - + Next point Наступна точка - + Structure options Опції структури - + Category Категорія - + @@ -3858,7 +3853,7 @@ The default template is located at: - + Length @@ -3866,7 +3861,7 @@ The default template is located at: - + Width @@ -3875,158 +3870,158 @@ The default template is located at: - + Height Висота - + Parameters of the structure Parameters of the structure - + Switch Length/Height Switch Length/Height - + Switch Length/Width Switch Length/Width - - + + This mesh is an invalid solid Ця сітка не може бути тілом - + Facemaker returned an error Генератор граней повернув помилку - + Node Tools Інструменти для вузлів - + Extends the nodes of this element to reach the nodes of another element Розширює вузли цього елемента до вузлів іншого елемента - + Connects nodes of this element with the nodes of another element З’єднує вузли цього елемента з вузлами іншого елемента - + Toggles all structural nodes of the document on/off Увімкнути/вимкнути всі структурні вузли документа - + Extrusion Tools Інструменти видавлювання - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: Виберіть інший Конструктивний об'єкт: - - + + The chosen object is not a Structure Обраний об'єкт не є структурою - - + + The chosen object has no structural nodes Обраний об'єкт не має структурних вузлів - - + + One of these objects has more than 2 nodes Один з цих об'єктів має понад 2 вузли - - + + Unable to find a suitable intersection point Не вдалося знайти відповідну точку перетину - + Intersection found. Виявлено перетин. - + Intersection found. Виявлено перетин. - + Done Готово @@ -4071,12 +4066,12 @@ The default template is located at: Створити профіль - + Profile Профіль - + Site Ділянка @@ -4139,7 +4134,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Будь ласка, виберіть базовий об'єкт - + Roof Дах @@ -4210,7 +4205,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Спереду - + External Reference Зовнішній референс @@ -4378,7 +4373,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Бібліотеку shapefile можна завантажити за вказаною нижче URL-адресою та встановити у теці macros: - + Window Вікно @@ -4425,75 +4420,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Висота підвіконня - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening Це вікно не має визначеного відкриття - - + + Get selected edge Отримати вибране ребро - + Unable to create component Не вдалося створити компонент - + Window elements Елементи вікна - + Hole wire Сітка отвору - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire Щільність сітки, що визначає отвір у хост-об'єкті. Значення нуля автоматично приймає найбільшу сітку - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4503,7 +4498,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove Вилучити @@ -4512,7 +4507,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add Додати @@ -4528,38 +4523,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit Редагувати - + Base 2D object Базовий двовимірний об’єкт - - + + Wires Сітки - + Components Компоненти - + Name Назва - + Type Тип @@ -4574,38 +4569,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset Зсув - + Hinge Шарнір - + Opening mode Режим відкриття - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge Натисніть, щоб виправити вибране ребро @@ -4651,7 +4646,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Записано успішно - + Truss Ферма @@ -4706,17 +4701,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project Проєкт - + Stairs Сходи - + Railing Поручні @@ -4726,12 +4721,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Створити сходи - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' вилучено властивості OutlineWireLeft та OutlineWireRight, а також додано властивості RailingLeft та RailingRight - + changed the type of properties 'RailingLeft' and 'RailingRight' змінено тип властивостей 'RailingLeft' та 'RailingRight' @@ -5043,7 +5038,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5264,7 +5259,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Одиниця - + Schedule Розклад @@ -5505,7 +5500,7 @@ Floor creation aborted. Новий набір властивостей - + Rebar Арматура @@ -5521,7 +5516,7 @@ Floor creation aborted. Select a base face on a structural object - + Section Розріз @@ -5655,7 +5650,7 @@ Building creation aborted. Створити Будівлю - + Space Проміжок @@ -5675,12 +5670,12 @@ Building creation aborted. Просторові кордони - + Wall Стіна - + Walls can only be based on Part or Mesh objects Стіни можуть бути створені лише на основі об'єктів "Частина" або "Сітка" @@ -5738,22 +5733,22 @@ Building creation aborted. Об'єднати Стіни - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction changed 'Normal' to [0, 0, 1] to preserve extrusion direction - + Cannot compute blocks for wall Неможливо обчислити блоки для стіни - + Error: Unable to modify the base object of this wall Помилка: Неможливо змінити базовий об'єкт цієї стіни - + Flip Direction Flip Direction @@ -5970,12 +5965,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Множинні Структури - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5983,12 +5978,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System Структурна система - + Create a structural system from a selected structure and axis Створити структурну систему з вибраної структури та осі @@ -5996,12 +5991,12 @@ Building creation aborted. Arch_Structure - + Structure Структура - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) Створює структуру з нуля або з вибраного об'єкта (ескіз, сітка, поверхня або суцільне тіло) @@ -6009,146 +6004,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element Додатковий шлях витіснення для цього елемента - + The computed length of the extrusion path Розрахована довжина шляху витіснення - + Start offset distance along the extrusion path (positive: extend, negative: trim) Початкова відстань зміщення вздовж лінії витіснення (позитивне значення: розширити, негативне: обрізати) - + End offset distance along the extrusion path (positive: extend, negative: trim) Кінцева відстань зміщення вздовж лінії витискування (позитивне значення: розширити, негативне значення: обрізати) - + Automatically align the Base of the Structure perpendicular to the Tool axis Автоматичне вирівнювання основи структури перпендикулярно до осі інструмента - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Зміщення X між базовою віссю та віссю інструмента (використовується тільки якщо значення BasePerpendicularToTool рівне True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Зсув по Y між базовою віссю та віссю інструмента (використовується тільки якщо BasePerpendicularToTool має значення True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Віддзеркалити основу вздовж осі Y (використовується тільки якщо BasePerpendicularToTool має значення True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Обертання основи навколо осі інструмента (використовується тільки якщо BasePerpendicularToTool має значення True) - + The length of this element, if not based on a profile Довжина цього елемента, якщо він не базується на профілі - + The width of this element, if not based on a profile Ширина цього елемента, якщо він не базується на профілі - + The height or extrusion depth of this element. Keep 0 for automatic Висота або глибина екструзії цього елемента. Залишити 0 для автоматичного визначення - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Напрямок нормальної екструзії цього об'єкта (для автоматичної нормальної екструзії зберігайте (0,0,0)) - + The structural nodes of this element Структурні вузли цього елемента - + A description of the standard profile this element is based upon Опис стандартного профілю, на якому базується цей елемент - + Offset distance between the centerline and the nodes line Відстань зміщення між центральною лінією та лінією вузлів - + The facemaker type to use to build the profile of this object Тип фейсмейкера, який буде використано для побудови профілю цього об'єкта - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not Якщо вузли видно чи ні - + The width of the nodes line Ширина лінії вузлів - + The size of the node points Розмір вузлових точок - + The color of the nodes line Колір лінії вузлів - + The type of structural node Тип структурного вузла - + Axes systems this structure is built on Системи осей, на яких побудована ця структура - + The element numbers to exclude when this structure is based on axes Номери елементів, які слід виключити, коли структура базується на осях - + If true the element are aligned with axes Якщо істина, то елементи вирівнюються за осями @@ -6448,6 +6443,42 @@ Building creation aborted. Thickness of the legs Товщина ніжок + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6885,7 +6916,7 @@ Building creation aborted. Показати символи відкриття висоти, якщо вони доступні - + The number of the wire that defines the hole. A value of 0 means automatic Кількість сітки, яка визначає отвір. Значення 0 означає автоматичне @@ -7142,7 +7173,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads Перекриття стрингерів над нижньою частиною сходинок @@ -8280,7 +8311,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8289,12 +8320,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Структурні інструменти diff --git a/src/Mod/BIM/Resources/translations/Arch_zh-CN.qm b/src/Mod/BIM/Resources/translations/Arch_zh-CN.qm index f3c8f3ae86..a3af36fc72 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_zh-CN.qm and b/src/Mod/BIM/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_zh-CN.ts b/src/Mod/BIM/Resources/translations/Arch_zh-CN.ts index 142214646e..fdc811df7c 100644 --- a/src/Mod/BIM/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/BIM/Resources/translations/Arch_zh-CN.ts @@ -3769,72 +3769,67 @@ The default template is located at: Arch - Structure - 结构 - - - - + Beam 梁 - - + + Column 柱 - + StructuralSystem 结构系统 - + Create Structures From Selection 选中以创建结构 - + Create Structural System 创建结构系统 - - + + Create Structure 创建结构 - + First point of the beam 梁的第一点 - + Base point of column 柱的基点 - + Next point 下一点 - + Structure options 结构选项 - + Category 类别 - + @@ -3844,7 +3839,7 @@ The default template is located at: - + Length @@ -3852,7 +3847,7 @@ The default template is located at: - + Width @@ -3861,158 +3856,158 @@ The default template is located at: - + Height 高度 - + Parameters of the structure 结构参数 - + Switch Length/Height 切换长度/高度 - + Switch Length/Width 切换长度/宽度 - - + + This mesh is an invalid solid 该网格是无效实体 - + Facemaker returned an error 服务器返回了一个错误 - + Node Tools 节点工具 - + Extends the nodes of this element to reach the nodes of another element 扩展将此元素的节点到另一个元素的节点 - + Connects nodes of this element with the nodes of another element 将此元素的节点与另一个元素的节点连接 - + Toggles all structural nodes of the document on/off 打开/关闭文件的所有结构节点 - + Extrusion Tools 挤压工具 - + Select the base object first and then the edges to use as extrusion paths 首先选择基础对象，然后选择要用作挤出路径的边缘 - + Select at least an axis object 至少选择一个轴对象 - + Error: The base shape could not be extruded along this tool object 错误：无法沿此工具对象挤压基本形状 - + Reset Nodes 重置节点 - + Edit Nodes 编辑节点 - + Extend Nodes 延伸节点 - + Connect Nodes 连接节点 - + Toggle All Nodes 切换所有节点 - - + + Select Tool 选择工具 - + Selects object or edges to be used as a tool (extrusion path) 选择要用作工具的对象或边缘（挤压路径） - - + + Choose another Structure object: 选取另一个结构对象 - - + + The chosen object is not a Structure 所选对象不是结构 - - + + The chosen object has no structural nodes 所选对象没有结构节点 - - + + One of these objects has more than 2 nodes 其中一个对象有超过 2 个节点 - - + + Unable to find a suitable intersection point 找不到合适的交点 - + Intersection found. 找到交集 - + Intersection found. 找到交集 - + Done 完成 @@ -4057,12 +4052,12 @@ The default template is located at: 创建配置文件 - + Profile 轮廓 - + Site 场地 @@ -4126,7 +4121,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 请选择一个基物体 - + Roof 屋顶 @@ -4197,7 +4192,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 前 - + External Reference 外部参考 @@ -4365,7 +4360,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile 库可以从下面的 URL 下载并安装在您的宏文件夹中： - + Window 窗口 @@ -4412,75 +4407,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 台体高度 - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening 此窗口没有定义为打开 - - + + Get selected edge 获取选中的边缘 - + Unable to create component 无法创建组件 - + Window elements 窗口元素 - + Hole wire 孔线 - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire 线的数目在主体对象中定义一个孔。值为零时将自动采用最大线数 - + Pick Selected 选取所选 - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth 框架深度 - + If this is checked, the window's Frame property value will be added to the value entered here 如果选中此项，窗口的框架属性值将添加到此处输入的值 - + If this is checked, the window's Offset property value will be added to the value entered here 如果选中此项，窗口的偏移属性值将添加到此处输入的值 @@ -4490,7 +4485,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove 移除 @@ -4499,7 +4494,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 添加 @@ -4515,38 +4510,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 编辑 - + Base 2D object 基础2D对象 - - + + Wires 线框 - + Components 组件 - + Name 名称 - + Type 类型 @@ -4561,38 +4556,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset 偏移 - + Hinge 铰链 - + Opening mode 开口模式 - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge 点击搜索选中的边 @@ -4638,7 +4633,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 写入成功 - + Truss 桁架 @@ -4693,17 +4688,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela {panel.Label} 的视图 - + Project 项目 - + Stairs 楼梯 - + Railing 栏杆 @@ -4713,12 +4708,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 创建楼梯 - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' 移除了属性“OutlineWireLeft”和“OutlineWireRight”，并添加了属性“RailingLeft”和“RailingRight” - + changed the type of properties 'RailingLeft' and 'RailingRight' 更改了“RailingLeft”和“RailingRight”属性的类型 @@ -5030,7 +5025,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape 无法计算形状 @@ -5251,7 +5246,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 单位 - + Schedule 计划 @@ -5488,7 +5483,7 @@ Floor creation aborted. 新建属性集 - + Rebar 钢筋 @@ -5504,7 +5499,7 @@ Floor creation aborted. 选择结构对象上的基本面 - + Section 剖面 @@ -5635,7 +5630,7 @@ Building creation aborted. 创建建筑物 - + Space 空间 @@ -5655,12 +5650,12 @@ Building creation aborted. 空间边界 - + Wall 墙壁 - + Walls can only be based on Part or Mesh objects 墙壁只能基于零件或网格对象 @@ -5718,22 +5713,22 @@ Building creation aborted. 合并墙 - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction 将 '正常' 更改为 [0, 0, 1] 以保持拉伸方向 - + Cannot compute blocks for wall 无法计算墙块 - + Error: Unable to modify the base object of this wall 错误：无法修改此墙的基础对象 - + Flip Direction Flip Direction @@ -5950,12 +5945,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures 多个结构 - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path 从选定的基础创建多个 BIM 结构，使用每个选定的边缘作为挤压路径 @@ -5963,12 +5958,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System 结构系统 - + Create a structural system from a selected structure and axis 根据选定的结构和轴创建结构系统 @@ -5976,12 +5971,12 @@ Building creation aborted. Arch_Structure - + Structure 结构 - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) 从头开始或从选定的对象（草图、线、面或实体）创建结构 @@ -5989,146 +5984,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element An optional extrusion path for this element - + The computed length of the extrusion path The computed length of the extrusion path - + Start offset distance along the extrusion path (positive: extend, negative: trim) Start offset distance along the extrusion path (positive: extend, negative: trim) - + End offset distance along the extrusion path (positive: extend, negative: trim) 沿挤压路径末端偏移距离(正值：扩张，负值：剪切) - + Automatically align the Base of the Structure perpendicular to the Tool axis Automatically align the Base of the Structure perpendicular to the Tool axis - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element - + A description of the standard profile this element is based upon A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch Select User Defined PropertySet to use in creating variant shape, with same ArchSketch - + If the nodes are visible or not If the nodes are visible or not - + The width of the nodes line The width of the nodes line - + The size of the node points The size of the node points - + The color of the nodes line The color of the nodes line - + The type of structural node The type of structural node - + Axes systems this structure is built on Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes If true the element are aligned with axes @@ -6428,6 +6423,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6865,7 +6896,7 @@ Building creation aborted. Show elevation opening symbols if available - + The number of the wire that defines the hole. A value of 0 means automatic The number of the wire that defines the hole. A value of 0 means automatic @@ -7122,7 +7153,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads The overlap of the stringers above the bottom of the treads @@ -8260,7 +8291,7 @@ Building creation aborted. Select User Defined PropertySet to use in creating variant shape, layers of the Arch Wall with same ArchSketch - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties @@ -8269,12 +8300,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools Structure tools diff --git a/src/Mod/BIM/Resources/translations/Arch_zh-TW.qm b/src/Mod/BIM/Resources/translations/Arch_zh-TW.qm index 4e2d9e9fa3..517100aa63 100644 Binary files a/src/Mod/BIM/Resources/translations/Arch_zh-TW.qm and b/src/Mod/BIM/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/BIM/Resources/translations/Arch_zh-TW.ts b/src/Mod/BIM/Resources/translations/Arch_zh-TW.ts index ab4ddd22ab..893fb4599a 100644 --- a/src/Mod/BIM/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/BIM/Resources/translations/Arch_zh-TW.ts @@ -3764,72 +3764,67 @@ The default template is located at: Arch - Structure - 結構 - - - - + Beam 樑 - - + + Column 柱 - + StructuralSystem 結構系統 - + Create Structures From Selection 從選擇中建立結構 - + Create Structural System 建立結構系統 - - + + Create Structure 建立結構 - + First point of the beam 樑的第一點 - + Base point of column 柱的基準點 - + Next point 下一個點 - + Structure options 結構選項 - + Category 類別 - + @@ -3839,7 +3834,7 @@ The default template is located at: - + Length @@ -3847,7 +3842,7 @@ The default template is located at: - + Width @@ -3856,158 +3851,158 @@ The default template is located at: - + Height 高度 - + Parameters of the structure 該結構的參數 - + Switch Length/Height 切換長度/高度 - + Switch Length/Width 切換長度/寬度 - - + + This mesh is an invalid solid 此網格為無效實體 - + Facemaker returned an error Facemaker 回傳錯誤 - + Node Tools 節點工具 - + Extends the nodes of this element to reach the nodes of another element 延伸此元件之節點以到達另一個元件之節點 - + Connects nodes of this element with the nodes of another element 連接此元件之節點與另一個元件之節點 - + Toggles all structural nodes of the document on/off 切換文件中所有結構節點開/關 - + Extrusion Tools 擠壓工具 - + Select the base object first and then the edges to use as extrusion paths Select the base object first and then the edges to use as extrusion paths - + Select at least an axis object Select at least an axis object - + Error: The base shape could not be extruded along this tool object Error: The base shape could not be extruded along this tool object - + Reset Nodes Reset Nodes - + Edit Nodes Edit Nodes - + Extend Nodes Extend Nodes - + Connect Nodes Connect Nodes - + Toggle All Nodes Toggle All Nodes - - + + Select Tool Select Tool - + Selects object or edges to be used as a tool (extrusion path) Selects object or edges to be used as a tool (extrusion path) - - + + Choose another Structure object: 選擇另一個結構物件： - - + + The chosen object is not a Structure 所選物件不是結構 - - + + The chosen object has no structural nodes 被選擇物件沒有結構節點 - - + + One of these objects has more than 2 nodes 這些物件其中之一有多於 2 個節點 - - + + Unable to find a suitable intersection point 無法找到合適的交點 - + Intersection found. 發現交集。 - + Intersection found. 發現交集。 - + Done 完成 @@ -4052,12 +4047,12 @@ The default template is located at: 建立輪廓 - + Profile 輪廓 - + Site 基地 @@ -4120,7 +4115,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 請選擇一個基礎物件 - + Roof 屋頂 @@ -4191,7 +4186,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 前視圖 - + External Reference 外部參考 @@ -4359,7 +4354,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Shapefile 函式庫可以自以下網址下載並安裝在您的巨集目錄： - + Window 窗 @@ -4406,75 +4401,75 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 窗臺高度 - - + + Invert Opening Direction Invert Opening Direction - - + + Invert Hinge Position Invert Hinge Position - + This window has no defined opening 此窗戶有沒定義的開口 - - + + Get selected edge 取得選定的邊 - + Unable to create component 無法建立組件 - + Window elements 窗戶元件 - + Hole wire 孔線 - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire 定義宿主物件內孔洞的線段編號。數值為零時將自動採用最大的線段 - + Pick Selected Pick Selected - + Create/Update Component Create/Update Component - + Create new Component Create new Component - + Frame depth Frame depth - + If this is checked, the window's Frame property value will be added to the value entered here If this is checked, the window's Frame property value will be added to the value entered here - + If this is checked, the window's Offset property value will be added to the value entered here If this is checked, the window's Offset property value will be added to the value entered here @@ -4484,7 +4479,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove 移除 @@ -4493,7 +4488,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Add 新增 @@ -4509,38 +4504,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Edit 編輯 - + Base 2D object 基礎 2D 物件 - - + + Wires 線 - + Components 組件 - + Name 名稱 - + Type 類型 @@ -4555,38 +4550,38 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Offset 偏移 - + Hinge 轉軸 - + Opening mode 開啟模式 - + + Frame property + Frame property - + + Offset property + Offset property - + Get Selected Edge Get Selected Edge - + Press to retrieve the selected edge 按此鍵擷取選定的邊緣 @@ -4632,7 +4627,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 成功寫入 - + Truss 桁架 @@ -4687,17 +4682,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela View of {panel.Label} - + Project 專案 - + Stairs 樓梯 - + Railing 扶手 @@ -4707,12 +4702,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 建立樓梯 - + removed properties 'OutlineWireLeft' and 'OutlineWireRight', and added properties 'RailingLeft' and 'RailingRight' 移除了屬性 'OutlineWireLeft' 和 'OutlineWireRight'，並添加了屬性 'RailingLeft' 和 'RailingRight' - + changed the type of properties 'RailingLeft' and 'RailingRight' 更改了屬性 'RailingLeft' 和 'RailingRight' 的類型 @@ -5024,7 +5019,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Could not compute a shape Could not compute a shape @@ -5245,7 +5240,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 單位 - + Schedule 排程 @@ -5486,7 +5481,7 @@ Floor creation aborted. 新增屬性集 - + Rebar 鋼筋 @@ -5502,7 +5497,7 @@ Floor creation aborted. Select a base face on a structural object - + Section 剖面 @@ -5634,7 +5629,7 @@ Building creation aborted. 建立建築物 - + Space 空間 @@ -5654,12 +5649,12 @@ Building creation aborted. 空間邊界 - + Wall 牆 - + Walls can only be based on Part or Mesh objects 牆壁只能基於零件或網格物件 @@ -5717,22 +5712,22 @@ Building creation aborted. 合併牆 - + changed 'Normal' to [0, 0, 1] to preserve extrusion direction 將「正常」改為 [0, 0, 1] 以保留擠壓方向 - + Cannot compute blocks for wall 無法計算牆塊 - + Error: Unable to modify the base object of this wall 錯誤：無法更改此牆壁的基礎物件 - + Flip Direction Flip Direction @@ -5949,12 +5944,12 @@ Building creation aborted. Arch_StructuresFromSelection - + Multiple Structures Multiple Structures - + Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path Creates multiple BIM Structures from a selected base, using each selected edge as an extrusion path @@ -5962,12 +5957,12 @@ Building creation aborted. Arch_StructuralSystem - + Structural System 結構系統 - + Create a structural system from a selected structure and axis 從選定的結構和軸建立結構系統 @@ -5975,12 +5970,12 @@ Building creation aborted. Arch_Structure - + Structure 結構 - + Creates a structure from scratch or from a selected object (sketch, wire, face or solid) 從頭開始或從選取的物件（草圖、線、面或實心）建立結構 @@ -5988,146 +5983,146 @@ Building creation aborted. App::Property - - + + An optional extrusion path for this element 此元件的可選擠壓路徑 - + The computed length of the extrusion path 擠壓路徑的計算長度 - + Start offset distance along the extrusion path (positive: extend, negative: trim) 沿擠壓路徑的起始偏移距離（正：延伸，負：修剪） - + End offset distance along the extrusion path (positive: extend, negative: trim) 沿擠壓路徑的結束偏移距離（正：延伸，負：修剪） - + Automatically align the Base of the Structure perpendicular to the Tool axis 自動對齊垂直於工具軸的結構基底 - + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) 基礎原點與工具軸之間的 X 偏移（僅在 BasePerpendicularToTool 為真時使用） - + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) 基礎原點與工具軸之間的 Y 偏移（僅在 BasePerpendicularToTool 為真時使用） - + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) 基礎鏡像圍繞著 Y 軸(只有當 BasePerpendicularTo 工具為真時使用) - + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) 基礎旋轉圍繞著工具軸(只有當 BasePerpendicularTo 工具為真時使用) - + The length of this element, if not based on a profile 該元件的長度，如果不是基於輪廓 - + The width of this element, if not based on a profile 該元件的寬度，如果不是基於輪廓 - + The height or extrusion depth of this element. Keep 0 for automatic 此元件之高或擠壓深度。自動保持為0 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 此物件的正常擠壓方向（保持為 (0,0,0) 以自動設定正常方向） - + The structural nodes of this element 此元件之結構節點 - + A description of the standard profile this element is based upon 此元件所基於的標準配置文件描述 - + Offset distance between the centerline and the nodes line 中心線與節點線之偏移距離 - + The facemaker type to use to build the profile of this object 用於建構該物件輪廓的facemaker類型 - - + + Selected edges (or group of edges) of the base ArchSketch, to use in creating the shape of this BIM Structure (instead of using all the Base shape's edges by default). Input are index numbers of edges or groups. 選擇基礎 ArchSketch 的邊緣（或邊緣群組），以用於建立此 BIM 結構的形狀（而不是使用預設的所有基礎形狀邊緣）。輸入為邊緣或邊緣群組的索引號碼。 - + Select User Defined PropertySet to use in creating variant shape, with same ArchSketch 選擇使用者定義 PropertySet 來建立變體形狀，使用相同的 ArchSketch - + If the nodes are visible or not 此節點可視與否 - + The width of the nodes line 節點線之寬度 - + The size of the node points 節點的大小 - + The color of the nodes line 節點線的顏色 - + The type of structural node 結構節點的類型 - + Axes systems this structure is built on 建構此結構之軸系統 - + The element numbers to exclude when this structure is based on axes 當該結構基於軸時要排除的元件編號 - + If true the element are aligned with axes 若為真，則元件與座標軸對齊 @@ -6427,6 +6422,42 @@ Building creation aborted. Thickness of the legs Thickness of the legs + + + side size + side size + + + + Slot size + Slot size + + + + Thickness of the wall + Thickness of the wall + + + + t-nut slot width + t-nut slot width + + + + t-nut slot depth + t-nut slot depth + + + + + Internal core size + Internal core size + + + + fillet radius + fillet radius + The base terrain of this site @@ -6864,7 +6895,7 @@ Building creation aborted. 在可獲得的情況下顯示立面圖開口符號 - + The number of the wire that defines the hole. A value of 0 means automatic 定義孔的導線數量。值為 0 表示自動 @@ -7121,7 +7152,7 @@ Building creation aborted. - + The overlap of the stringers above the bottom of the treads 踏板底部上方的縱樑重疊部分 @@ -8259,7 +8290,7 @@ Building creation aborted. 選擇使用者定義 PropertySet 來建立具有相同 ArchSketch 的拱牆變體形狀和圖層 - + Use Base ArchSketch (if used) data (e.g. widths, aligns, offsets) instead of Wall's properties 使用 Base ArchSketch（如果使用）資料（例如寬度、對齊、偏移）而不是牆的屬性 @@ -8268,12 +8299,12 @@ Building creation aborted. Arch_StructureTools - + Structure Tools Structure Tools - + Structure tools 結構工具 diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM.ts b/src/Mod/CAM/Gui/Resources/translations/CAM.ts index 922cb2933c..2d753278c4 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM.ts @@ -299,61 +299,10 @@ For stock from the base object's bounding box it means the extra material i - - Controller - - - - - Controller Name / Tool Number - - - - - Horizontal feed - - - - - Vertical feed - - - - - Horizontal rapid - - - - - Vertical rapid - - - - - Spindle - - - - - Forward - - - - - Reverse - - - - Tool - - - Any modifications only affect this ToolController! - - Tool Editor @@ -943,7 +892,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -957,49 +906,49 @@ Reset deletes all current items from the list and fills the list with all circul - + Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry - + Angle of the helix entry cone @@ -1017,130 +966,149 @@ Larger values (further to the right) will calculate faster; smaller values (furt - + + + + + + + + + + + + + + + + Edit Tool Controller + + + + Accuracy vs performance - + Force clearing inside-out - + Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave - + Helix ramp angle - - + + Use outline - + Operation type - + Keep tool down ratio - + Helix cone angle - + Lift distance - + Cut region - + Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region - + Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) - + Stop - - - - + + + + Direction - + CW - + CCW - + Round joint - + Miter joint - - + + @@ -1154,22 +1122,22 @@ This option changes that behavior to cut each discrete area to its full depth be - + Width of chamfer cut - + Extra depth of tool immersion - + Join: - + TextLabel @@ -1184,43 +1152,43 @@ This option changes that behavior to cut each discrete area to its full depth be - + Peck - + Extend depth - + Drill tip - + 2x drill tip - + Depth - + Retract - + Chip break - + Dwell @@ -1231,7 +1199,7 @@ This option changes that behavior to cut each discrete area to its full depth be - + Time @@ -1258,61 +1226,61 @@ This option changes that behavior to cut each discrete area to its full depth be - + None - + Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move - + Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside - + Outside - + The direction for the helix, clockwise or counterclockwise - - + + Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent @@ -1382,36 +1350,36 @@ This option changes that behavior to cut each discrete area to its full depth be - + Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode - - + + Climb - - + + Conventional - + Pattern @@ -1453,266 +1421,266 @@ The latter can be used to face of the entire stock area to ensure uniform height - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material - + ZigZag - + Spiral - + ZigZagOffset - + Line - + Grid - + Triangle - + Angle - + Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance - + The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point - - + + Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges - + Min travel - + Check to skip machining regions that have already been cleared by previous operations - + Use rest machining - + Use Start Point - + Probe grid points - + X: - + Y: - + Probe - + X offset - + Y offset - + File name - + Output - + Enter the filename where the probe points should be written - + ProbePoints.txt - - + + PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape - + Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover - + If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation - + Process Perimeter - - + + Vertex - + End Feature Reference - + Choose what point to use on the first selected feature @@ -1722,307 +1690,307 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Start feature reference - - + + Center of mass - - + + Center of bounding box - - + + Lowest point - - + + Highest point - + Long edge - + Short edge - + Choose what point to use on the second selected feature - + No base geometry Selected - + No base geometry selected - + Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab - + Extend path start - - - + + + Layer mode - + Path orientation - + Choose the path orientation with regard to the features selected - + Start to end - + Positive extends the beginning of the path, negative shortens - + Extend Path End - + Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass - + Multi-pass - + Perpendicular - + Enable to reverse the cut direction of the slot path - + Reverse cut direction - - + + Bounding box - - + + Select the overall boundary for the operation - + Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern - - + + Set the geometric clearing pattern to use for the operation - + Profile edges - + Profile the edges of the selection - + Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis - + Drop cutter direction - + Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface - + Stepover - + Set to true if specifying a start point - - + + Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement - + Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment - + Step over - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval @@ -2136,114 +2104,119 @@ Default: 3 mm - + Thread - + Orientation - + Type - + Fit - + Major diameter - + Minor diameter - + Lead in/out - + Pitch - + + The tool and its settings to be used for this operation. + + + + TPI - + Operation - + Passes - + Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections - + Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements - + Algorithm @@ -2400,17 +2373,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul - + G-Code - + Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start @@ -3151,7 +3124,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add @@ -3191,126 +3163,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From - - - Surface - - - - - Remove - - - - - Base geometry - - - - - Drag to reorder, then update - - - - - Add item selected in window - - - - - Remove item selected in list, then update - - - - - Update the path with the removed and reordered items - - - - - Update - - - - - All objects will be profiled using the same depth and speed settings - - - - - Depths - - - - - Start depth - - - - - Final depth - - - - - Step down - - - - - Finish step down - - - - - Safe height - - - - - Clearance height - - - - - Tool controller - - - - - Coolant mode - - - - - OCL dropcutter - - - - - OCL waterline - - - - - Heights - - - - - Operation - - - - - The tool and its settings to be used for this operation. - - - - - Algorithm - - Z Depth Correction @@ -4024,17 +3876,17 @@ Default: 3 mm - + Drag Slider to Simulate - + Save Project As - + CAMotics Project (*.camotics) @@ -4071,17 +3923,17 @@ Default: 3 mm - + Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4129,12 +3981,12 @@ Default: 3 mm - + %s not supported for flipping - + Zero working area to process. Check your selection and settings. @@ -4310,8 +4162,8 @@ Default: 3 mm - - + + The base toolpath to modify @@ -4332,90 +4184,90 @@ Default: 3 mm - + Calculate roll-on to toolpath - + Calculate roll-off from toolpath - + Keep the tool down in toolpath - - + + Length or radius of the approach - + Length or radius of the exit - - + + The style of motion into the toolpath - - + + The style of motion out of the toolpath - + Extends lead in distance - + Extends lead out distance - + Apply Lead in/out to layers within an operation - + Perform plunges with G0 - + Angle of ramp - + Ramping Method - + Which feed rate to use for ramping - + Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6215,79 +6067,79 @@ Use property KeepToolDown to change this - + Edit - + Base Geometry - + Multiple operations are labeled as - + Base Location - + Heights - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths - + Diameters - + AreaOp Operation - + Operation - + Uncreate AreaOp Operation - + Start Point Selection - + Selects the start point - + No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation @@ -6498,51 +6350,51 @@ Aborting op creation - - + + Arc - - + + Tangent - - + + Perpendicular - - + + Length/radius positive not Null - + Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object - + Select a Profile object - + The selected object is not a toolpath @@ -6710,67 +6562,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 - + RampMethod2 - + RampMethod3 - + Helix - + Horizontal Feed Rate - + Vertical Feed Rate - + Ramp Feed Rate - + Custom - + Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object - + Select a Profile object - + The selected object is not a toolpath @@ -7444,6 +7296,21 @@ Aborting op creation Mist + + + Copy {0}… + + + + + New tool controller… + + + + + This tool controller is used by {0} other operations. + + CAM @@ -8622,27 +8489,27 @@ Aborting op creation - + Tool Selector - + Open Library Editor - + Add to Job - + No Job Found - + Please create a Job first. @@ -8663,12 +8530,12 @@ Aborting op creation CAM_Camotics - + CAMotics - + Simulates using CAMotics @@ -8957,28 +8824,15 @@ Aborting op creation - - CAM_ToolBitDock - - - Toolbit Dock - - - - - Toggles the toolbit dock - - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor - + Opens an editor to manage toolbit libraries @@ -9268,4 +9122,60 @@ Aborting op creation + + Frame + + + Controller Name / Tool Number + + + + + Horizontal feed + + + + + Vertical feed + + + + + Horizontal rapid + + + + + Vertical rapid + + + + + Spindle + + + + + Forward + + + + + Reverse + + + + + CAM_ToolBitSelection + + + Add toolbit… + + + + + Opens the toolbit selection dialog + + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_be.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_be.ts index c9e9bc4a4f..7b558a7f03 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_be.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_be.ts @@ -16,7 +16,7 @@ Creates a feature area from the selected objects - Creates a feature area from the selected objects + Стварае вобласць характарыстык з абраных аб'ектаў @@ -29,12 +29,12 @@ Area Workplane - Area Workplane + Плошча працоўнай плоскасці Selects a workplane for a feature area - Selects a workplane for a feature area + Абірае плошчу працоўнай плоскасці для вобласці характарыстык @@ -52,7 +52,7 @@ Creates a compound from the selected toolpaths - Creates a compound from the selected toolpaths + Стварае злучэнне з абраных траекторый руху інструмента @@ -106,7 +106,7 @@ New Job - New Job + Новае заданне @@ -116,7 +116,9 @@ Select a template for the job. Templates are creatable from an existing job's context menu. Template files use the `job_*.json` naming convention and are stored in the macro or path directory (path configurable in preferences). - Select a template for the job. Templates are creatable from an existing job's context menu. Template files use the `job_*.json` naming convention and are stored in the macro or path directory (path configurable in preferences). + Абраць шаблон для задання. +Шаблоны можна стварыць з кантэкстнага меню існуючага задання. +У файлах шаблонаў ужываецца пагадненне аб назвах ' job_*.json', і яны захоўваюцца ў каталогу макрасаў ці шляху (шлях наладжваецца ў перавагах). @@ -126,7 +128,7 @@ Base Model Selection - Base Model Selection + Выбар асноўнай мадэлі @@ -166,57 +168,58 @@ If enabled, include all post processing settings in the template - If enabled, include all post processing settings in the template + Калі птушка, уключыць усе налады пасляапрацоўкі ў шаблон Hint about the current post processing configuration - Hint about the current post processing configuration + Падказка пра бягучую наладу пасляапрацоўкі If enabled, tool controller definitions are stored in the template - If enabled, tool controller definitions are stored in the template + Калі птушка, вызначэнне кантролеру інструментаў захоўваецца ў шаблоне Check all tool controllers which should be included in the template - Check all tool controllers which should be included in the template + Праверыць усе кантралёры інструментаў, якія павінны быць уключаныя ў шаблон Includes SetupSheet values in the template. Any SetupSheet values modified from their default are preselected. - Includes SetupSheet values in the template. Any SetupSheet values modified from their default are preselected. + Уключае ў шаблон значэння налады аркуша. +Усе значэнні налады аркуша, якія змененыя ў параўнанні з іх першапачатковым значэннем, выбіраюцца папярэдне. Enable to include the default heights for operations in the template - Enable to include the default heights for operations in the template + Уключыць, каб змясціць першапачатковыя вышыні для аперацый у шаблоне Operation heights - Operation heights + Аперацыі вышыні Operation depths - Operation depths + Аперацыі глыбіні Enable to include the default rapid tool speeds in the template - Enable to include the default rapid tool speeds in the template + Уключыць, каб змясціць хуткасць падачы першапачатковага інструменту ў шаблоне Tool rapid speeds - Tool rapid speeds + Хуткасць падачы хуткага інструмента Enable to include the default coolant mode in the template - Enable to include the default coolant mode in the template + Уключыць, каб змясціць першапачатковы рэжым астуджэння ў шаблоне @@ -257,11 +260,12 @@ Note that this option is disabled if a stock object from an existing solid is us For box and cylinder stocks this means the actual size of the stock solid being created. For stock from the base object's bounding box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's base object and apply the stored extra settings. - If enabled, the current size settings for the stock object are included in the template. + Калі ўключана, бягучыя налады памеру для аб'екта прыпуску ўключаны ў шаблон. -For box and cylinder stocks this means the actual size of the stock solid being created. +Для загатоўкі паралелепіпеда і цыліндра гэта азначае фактычны памер створанага аб'екта прыпуску. -For stock from the base object's bounding box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's base object and apply the stored extra settings. +Для загатоўкі з габарытаў асноўнага аб'екту гэта азначае дадатковы матэрыял ва ўсіх напрамках. +Аб'ект загатоўкі, які створаны на аснове такога шаблону, атрымае свой асноўны памер з асноўнага аб'екта новага задання, і прыменіць захаваныя дадатковыя налады. @@ -271,12 +275,12 @@ For stock from the base object's bounding box it means the extra material i Hint about the current stock extent setting - Hint about the current stock extent setting + Падказка пра бягучую наладу ступені загатоўкі If enabled, the current placement of the stock solid is stored in the template - If enabled, the current placement of the stock solid is stored in the template + Калі птушка, бягучае размяшчэнне загатоўкі суцэльнага цела захоўваецца ў шаблоне @@ -286,7 +290,7 @@ For stock from the base object's bounding box it means the extra material i Hint about the current stock placement - Hint about the current stock placement + Падказка пра бягучае размяшчэнне загатоўкі @@ -301,7 +305,9 @@ For stock from the base object's bounding box it means the extra material i Displays available post processors. FreeCAD includes several pre-installed post processors. At least one post processor must be enabled in preferences. - Displays available post processors. FreeCAD includes several pre-installed post processors. At least one post processor must be enabled in preferences. + Адлюстроўвае даступныя пасляапрацоўкі. +FreeCAD уключае ў сябе некалькі прадусталяваных пасляапрацоўкі. +У наладах павінен быць уключаны хоць бы адна пасляапрацоўка. @@ -309,61 +315,10 @@ For stock from the base object's bounding box it means the extra material i Рэдактар кантролера інструментаў - - Controller - Кантролер - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Шпіндаль - - - - Forward - Наперад - - - - Reverse - Перавярнуць - - - Tool Інструмент - - - Any modifications only affect this ToolController! - Любыя змены закранаюць толькі гэты кантролер інструмента! - Tool Editor @@ -382,12 +337,14 @@ For stock from the base object's bounding box it means the extra material i Name of the property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces "Mixed Case" - Name of the property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces "Mixed Case" + Назва ўласцівасці. +Можа змяшчаць толькі літары, лічбы і падкрэслены знак. +Складовыя назвы будуць адлюстраваныя з прабеламі 'Змешаныя літары' The category group the property belongs to - The category group the property belongs to + Суполка катэгорый, да якой належыць уласцівасць @@ -397,7 +354,7 @@ For stock from the base object's bounding box it means the extra material i The type of the property value - The type of the property value + Тып значэння ўласцівасці @@ -412,7 +369,7 @@ For stock from the base object's bounding box it means the extra material i ToolTip to be displayed when user hovers mouse over property - ToolTip to be displayed when user hovers mouse over property + Парада, якая будзе адлюстраваная пры навядзенні паказальніка мышы на ўласцівасць @@ -427,7 +384,7 @@ For stock from the base object's bounding box it means the extra material i Check to create several properties in a batch - Check to create several properties in a batch + Праверыць, каб стварыць некалькі ўласцівасцяў у пакетным рэжыме @@ -452,7 +409,7 @@ For stock from the base object's bounding box it means the extra material i Adds the existing tool bit to the library - Adds the existing tool bit to the library + Дадае такарны разец, які існуе, у бібліятэку @@ -462,7 +419,7 @@ For stock from the base object's bounding box it means the extra material i Deletes the selected tool bits from the library - Deletes the selected tool bits from the library + Выдаляе абраныя такарныя разцы з бібліятэкі @@ -472,22 +429,22 @@ For stock from the base object's bounding box it means the extra material i Add new tool table - Add new tool table + Дадаць новыую табліцу інструментаў Save the current library - Save the current library + Захаваць бягучую бібліятэку Table of tool bits of the library - Table of tool bits of the library + Табліца такарных разцоў у бібліятэцы Close the library editor - Close the library editor + Зачыніце сродак праўкі бібліятэкі @@ -497,22 +454,22 @@ For stock from the base object's bounding box it means the extra material i Tool Parameter Editor - Tool Parameter Editor + Сродак праўкі налад інструментаў Notes - Notes + Заўвага Coating - Coating + Пакрыццё Hardness - Hardness + Цвёрдасць @@ -522,7 +479,7 @@ For stock from the base object's bounding box it means the extra material i Supplier - Supplier + Пастаўшчык @@ -540,17 +497,17 @@ For stock from the base object's bounding box it means the extra material i CAM Job Selection - CAM Job Selection + Выбар задання CAM Tool Controller Selection - Tool Controller Selection + Выбар кантролеру інструмента Tool controller - Tool controller + Кантролер інструментаў @@ -558,7 +515,7 @@ For stock from the base object's bounding box it means the extra material i Processor Selection - Processor Selection + Выбар пасляапрацоўкі @@ -586,12 +543,12 @@ For stock from the base object's bounding box it means the extra material i Create box - Create box + Стварыць паралелепіпед Create cylinder - Create cylinder + Стварыць цыліндр @@ -964,7 +921,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -978,12 +935,12 @@ Reset deletes all current items from the list and fills the list with all circul Астуджальная вадкасць - + Type of adaptive operation Тып адаптыўнай аперацыі - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -992,41 +949,41 @@ Larger values (further to the right) will calculate faster; smaller values (furt Вялікія значэнні (размешчаныя справа) паскараюць вылічэнні; меншыя значэнні (размешчаныя злева) забяспечваюць больш дакладныя траекторыі руху інструмента. - + Cut inside or outside of the selected shapes Выразаць унутры ці звонку абраных фігур - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Калі значэнне больш за нуль, гэта абмяжоўвае дыяметр нахілу спіралі. У адваротным выпадку ўжываецца 75% дыяметру інструмента - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Як высока вы павінны ўздымаць інструмент пры хуткіх злучальных рухах над вычышчанымі абласцямі. Калі злучальная траекторыя не вольная, інструмент уздымаецца да вышыні зазору. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Найбольшая даўжыня спуску інструмента ў адносінах да прамой адлегласці паміж кропкамі. У выпадку перавышэння, прывязка будзе ажыццяўляцца шляхам узняцця інструмента на вышыню зазору. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Велічыня, на якую інструмент ссоўваецца ўбок пры кожным цыкле шаблону, паказваецца ў адсотках ад дыяметра інструмента. Пераход на 100% не прыводзіць да перакрыцця двух розных цыклаў. - + Angle of the helix ramp entry Вугал уваходу спіралі - + Angle of the helix entry cone Вугал уваходу конусу спіралі @@ -1041,76 +998,95 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - Tool controller + Кантролер інструментаў - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1119,57 +1095,57 @@ This option changes that behavior to cut each discrete area to its full depth be Змяняе гэтыя паводзіны, каб выразаць кожную асобную вобласць на поўную глыбіню перад пераходам да наступнай. - + Order cuts by region Парадак рэзкі па рэгіёнах - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Колькі матэрыялу пакінуць наўздоўж восі Z (гэта значыць для фінішнай апрацоўкі) - + Stop Спыніць - - - - + + + + Direction Напрамак - + CW па гадзінніку - + CCW супраць гадзінніка - + Round joint Закругленае аб'яднанне - + Miter joint Дыяганальнае аб'яднанне - - + + @@ -1183,22 +1159,22 @@ This option changes that behavior to cut each discrete area to its full depth be мм - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Аб'яднаць: - + TextLabel Тэкставы надпіс @@ -1213,43 +1189,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Даўбёжнае свідраванне - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Глыбіня - + Retract Адвод - + Chip break Chip break - + Dwell Невялічкая паўза @@ -1260,7 +1236,7 @@ This option changes that behavior to cut each discrete area to its full depth be Форма - + Time Час @@ -1268,12 +1244,12 @@ This option changes that behavior to cut each discrete area to its full depth be Tap tip - Tap tip + Разьбавы кончык 2x tap tip - 2x tap tip + 2х разьбавы кончык @@ -1287,62 +1263,62 @@ This option changes that behavior to cut each discrete area to its full depth be Кантролер інструмента - + None Адсутнічае - + Feed retract Адвод падачы - + G85: Retract from the hole at the given feedrate instead of rapid move G85: адвод з адтуліны з зададзенай хуткасцю падачы замест хуткага перамяшчэння - + Start from Пачаць з - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center + Пакажыце, ці павінна аперацыя спіралі пачынацца знутры і прасоўвацца вонкі, альбо пачынацца звонку і прасоўвацца да цэнтра - + Inside Унутры - + Outside Звонку - + The direction for the helix, clockwise or counterclockwise - The direction for the helix, clockwise or counterclockwise + Напрамак вярчэння спіралі - па гадзінніку ці супраць - - + + Extra offset - Extra offset + Дадатковае зрушэнне - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Пакажыце адсотак дыяметра інструмента, пры якім кожная спіраль будзе зрушаная адносна папярэдняй. Крок, які перавышае 100%, азначае адсутнасць перакрыцця асобнай апрацоўкі. - - - + + + Step over percent Крок наперад у адсотках @@ -1385,7 +1361,7 @@ This option changes that behavior to cut each discrete area to its full depth be Enable extensions - Enable extensions + Уключыць пашырэнне @@ -1396,17 +1372,18 @@ This option changes that behavior to cut each discrete area to its full depth be Extend corners - Extend corners + Выцягнуць куты Default length - Default length + Першапачатковая даўжыня Set the extent of the dimension. The default value is half the tool diameter. - Set the extent of the dimension. The default value is half the tool diameter. + Задае дыяпазон вымярэння. +Першапачатковае значэнне складае палову дыяметра інструмента. @@ -1414,38 +1391,38 @@ This option changes that behavior to cut each discrete area to its full depth be Адключыць - + Boundary Shape Фігура мяжы - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. + Пакажыце, ці павінна абліцоўка абмяжоўвацца фактычнай фігурай абранай грані (ці дэталі, калі грань не абраная), альбо калі габарыты павінны быць звернутымі ў бок. -The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. +Апошняе можна ўжываць для абліцоўкі ўсёй вобласці загатоўкі, каб забяспечыць раўнамерную вышыню для наступных аперацый. - + Cut Mode Рэжым апрацоўкі - - + + Climb Узбірацца - - + + Conventional Звычайны - + Pattern Шаблон @@ -1484,274 +1461,275 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - Coolant mode + Рэжым астуджэння - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Рэжым апрацоўкі мяркуе, што апрацоўкі на адным баку такарным разцом уяўляе сабой атрыманую дэталь, а другі бок альбо ўжо адздрабнены, альбо будзе выдалены пазней. Рэжым уздыму - калі такарны разец рухаецца ў разрэз пры кожным вярчэнні, тады як у звычайным рэжыме вярчэнне такарных разцоў і бакавы рух інструментаў адбываюцца ў адным напрамку - + Pattern the tool bit is moved in to clear the material Шаблон, у якім такарны разец рухаецца ўнутр, каб ачысціць матэрыял - + ZigZag Зігзаг - + Spiral Спіраль - + ZigZagOffset Зрушэнне зігзагу - + Line Лінія - + Grid Сетка - + Triangle Трыкутнік - + Angle Вугал - + Angle in which the pattern is applied Вугал, пад якім прымяняецца шаблон - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Велічыня, на якую інструмент ссоўваецца ўбок пры кожным цыкле шаблону, паказваецца ў адсотках ад дыяметра інструмента. Пераход на 100% не прыводзіць да перакрыцця двух розных цыклаў - + Material allowance - Material allowance + Дапаможнік матэрыялу - + The amount of material that should be left by this operation in relation to the target shape Колькасць матэрыялу, якое павінна застацца ў выніку гэтай аперацыі, у адносінах да мэтавай фігуры - + Specify if this operation uses a starting point Пакажыце, ці ўжываецца ў аперацыі пачатковая кропка - - + + Use start point - Use start point + Ужыць пачатковую кропку - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Калі абрана, аперацыя ўжывае контур абранай асноўнай геаметрыі і прапускае ўсе адтуліны і астраўкі - - - Clear edges - Clear edges - - Min travel - Min travel + Clear edges + Ачысціць рэбры + Min travel + Найменшы ход + + + Check to skip machining regions that have already been cleared by previous operations Праверце, ці не прапускаюцца вобласці апрацоўкі, якія ўжо былі ачышчаны папярэднімі аперацыямі - + Use rest machining - Use rest machining + Ужываць механічную апрацоўку - + Use Start Point Ужыць пачатковую кропку - + Probe grid points - Probe grid points + Кропкі на сетцы зонда - + X: X: - + Y: Y: - + Probe Зонд - + X offset - X offset + Зрушэнне ў напрамку восі X - + Y offset - Y offset + Зрушэнне ў напрамку восі Y - + File name - File name + Імя файла - + Output Вывад - + Enter the filename where the probe points should be written Увядзіце імя файла, куды павінны быць запісаныя кропкі зонду - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER ЗАПАЎНЯЛЬНІК - - + + The direction in which the profile is performed, clockwise or counterclockwise Напрамак, у якім выконваецца профіль, па гадзінніку ці супраць - + The amount of extra material left by this operation in relation to the target shape Колькасць дадатковага матэрыялу, які пакінуты ў выніку гэтай аперацыі, у адносінах да мэтавай фігуры - - - Cut side - Cut side - - Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). + Cut side + Апрацаваць бок - + + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). + Пакажыце, ці варта ўжываць профіль унутры ці звонку асноўных геаметрычных характарыстык. +Гэта мае значэнне толькі калі ўключаная налада 'Ужываецца кампенсацыя' (першапачаткова). + + + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass Пры выкананні некалькіх праходаў патрабуецца дадатковае зрушэнне кожнага дадатковага праходу - + Check if this operation should use a starting point Праверце, ці павінна ўжываць гэтая аперацыя пачатковую кропку - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Правярае, ці павінна гэтая аперацыя прафілявання таксама апрацоўваць адтуліны ў асноўнай геаметрыі. Знойдзеныя адтуліны аўтаматычна ссоўваюцца на супрацьлеглы бок апрацоўкі, і выконваецца ў супрацьлеглым напрамку ад перыметраў. Звярніце ўвагу, што не ўключаюцца круглыя адтуліны, бо мяркуецца, што яны будуць прасвідраваныя - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Праверце, ці павінна гэтая аперацыя прафілявання таксама апрацоўваць вонкавы перыметр асноўных геаметрычных фігур - + Use Compensation Ужыць кампенсацыю - + Process Perimeter Тэхналагічны перыметр - - + + Vertex Вяршыня - + End Feature Reference Канчатковы спасылак характарыстык - + Choose what point to use on the first selected feature Абраць, якую кропку ўжываць для першай абранай характарыстыкі @@ -1761,300 +1739,300 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Цэнтр масы - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Абраць, якую кропку ўжываць для другой абранай характарыстыкі - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Станоўчае значэнне выцягвае пачатак траекторыі, адмоўнае - скарачае - + Extend Path End Выцягнуць канец траекторыі - + Positive extends the end of the path, negative shortens Станоўчае значэнне выцягвае канец траекторыі, адмоўнае - скарачае - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Завершае аперацыю за адзін праход на глыбіню, альбо за некалькі праходаў да канчатковай глыбіні - + Single-pass Адзін праход - + Multi-pass Шмат праходаў - + Perpendicular Перпендыкулярна - + Enable to reverse the cut direction of the slot path Уключыць, каб змяніць напрамак апрацоўкі траекторыі паза ў зваротным напрамку - + Reverse cut direction Адваротны напрамак апрацоўкі - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Дадатковае зрушэнне габарытаў X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Лініі фрэзеравання ствараць паралельна дадзенай восі. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Задаць дазвол выбаркі. Меншыя значэння хутка павялічваюць час апрацоўкі. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Уключыць аптымізацыю лінейных траекторый (калінеарных кропак). Выдаляе непатрэбныя калінеарныя кропкі з вываду G-code. - + Enable separate optimization of transitions between, and breaks within, each step over path. Уключыць асобную аптымізацыю пераходаў паміж кожным крокам па траекторыі і пераходаў унутры яго. - + Depth offset Зрушэнне глыбіні - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Пераступіць - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2062,8 +2040,8 @@ A step over of 100% results in no overlap between two different cycles. Пераход на 100% не прыводзіць да перакрыцця двух розных цыклаў. - - + + Sample interval Інтэрвал выбаркі @@ -2184,117 +2162,122 @@ Default: 3 mm Па вертыкалі - + Thread Разьба - + Orientation Арыентацыя - + Type Тып - + Fit Запаўненне - + Major diameter Вонкавы дыяметр - + Minor diameter Унутраны дыяметр - + Lead in/out Lead in/out - + Pitch Крок - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI Крок (віткоў на цалю) - + Operation Аперацыя - + Passes Прапусціць - + Discretization Deflection Адхіленне дыскрэтызацыі - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Гэтае значэнне ўжываецца пры падзеле дуг на адрэзкі. Меншыя значэнні прывядуць да павелічэння памеру G-code. Вялікія значэнні могуць прывесці да з'яўлення непажаданых адрэзкаў на траекторыі сярэдняй лініі. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Завяршальны праход з зрушэннем Z - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Зрушэнне канцавога фрэзеравання для канцавога праходу. Ужывайце невялікае значэнне, напрыклад -0.2 мм, каб ачысціць "недакладную паверхню" ці іншыя недахопы. - + After carving, travel again the path to remove artifacts and imperfections Пасля выразання зноў прайдзіце па гэтым шляху, каб выдаліць артэфакты і дэфекты - + Finishing pass Фінішны праход - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Аптымізаваць рух - + Algorithm Алгарытм @@ -2455,17 +2438,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Стваральнік перамычак - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -2690,12 +2673,12 @@ See the file save policy below on how to deal with name conflicts. Create box - Create box + Стварыць паралелепіпед Create cylinder - Create cylinder + Стварыць цыліндр @@ -3253,7 +3236,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Дадаць @@ -3297,126 +3279,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Капіраваць з - - - Surface - Паверхня - - - - Remove - Выдаліць - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Абнавіць - - - - All objects will be profiled using the same depth and speed settings - Усе аб'екты будуць апрацаваныя з аднолькавымі наладамі глыбіні і хуткасці - - - - Depths - Глыбіні - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Вышыні - - - - Operation - Аперацыя - - - - The tool and its settings to be used for this operation. - Інструмент і яго налады, якія будуць ужывацца для дадзенай аперацыі. - - - - Algorithm - Алгарытм - Z Depth Correction @@ -3741,12 +3603,12 @@ FreeCAD не ведае, дзе існуе пэўная сістэма каар Create box - Create box + Стварыць паралелепіпед Create cylinder - Create cylinder + Стварыць цыліндр @@ -3897,7 +3759,7 @@ FreeCAD не ведае, дзе існуе пэўная сістэма каар Coolant mode - Coolant mode + Рэжым астуджэння @@ -4175,17 +4037,17 @@ Default: 3 mm Змяніць - + Drag Slider to Simulate Перацягнуць паўзунок для мадэлявання - + Save Project As Захаваць праект як - + CAMotics Project (*.camotics) Праект CAMotics (*.camotics) @@ -4222,17 +4084,17 @@ Default: 3 mm Частата кручэння шпіндаля - + Selected tool is not a drill Абраны інструмент не з'яўляецца дрылём - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Хібны вугал рэжучага рабра %.2f, павінен быць болей 0° і меней 180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Вугал рэжучага рабра (%.2f) прыводзіць да адмоўнай даўжыні кончыка інструмента @@ -4280,12 +4142,12 @@ Default: 3 mm isHorizontal(%s) не падтрымліваецца - + %s not supported for flipping %s не падтрымліваецца для павароту - + Zero working area to process. Check your selection and settings. Нулявая працоўная зона для апрацоўкі. Праверце свой выбар і налады. @@ -4461,8 +4323,8 @@ Default: 3 mm - - + + The base toolpath to modify Асноўная траекторыя руху інструмента для змены @@ -4483,90 +4345,90 @@ Default: 3 mm Вышыня, якую трэба падняць пры павароце - + Calculate roll-on to toolpath Разлічыць накат на траекторыю руху інструмента - + Calculate roll-off from toolpath Разлічыць адкат ад траекторыі руху інструмента - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Выканаць апусканне з дапамогай G0 - + Angle of ramp Angle of ramp - + Ramping Method Метад нарастання магутнасці - + Which feed rate to use for ramping Якую ўжываць хуткасць падачы для набору магутнасці - + Custom feed rate Карыстальніцкая хуткасць падачы - + Should the dressup ignore motion commands above DressupStartDepth Ці павінна аздабленне ігнараваць каманды руху, якія прыведзеныя вышэй DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Глыбіня, на якой уключана аздабленне ўваходных перамычак. Вышэй гэтай глыбіні перамычкі не ствараецца, але каманды руху перадаюцца як ёсць. @@ -6379,81 +6241,81 @@ Use property KeepToolDown to change this Задаць False, каб прадухіліць стварэнне G-code для аперацыі - + Edit Змяніць - + Base Geometry Асноўная геаметрыя - + Multiple operations are labeled as Некалькі аперацый пазначаныя як - + Base Location Асноўнае месцазнаходжанне - + Heights Вышыні - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Канчатковая глыбіня не можа быць зменена для гэтай аперацыі. Калі неабходна задаць канчатковую глыбіню ўручную, калі ласка, абярыце іншую аперацыю. - + Depths Глыбіні - + Diameters Дыяметры - + AreaOp Operation Аперацыя AreaOp - + Operation Аперацыя - + Uncreate AreaOp Operation Аперацыя адмены AreaOp - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Не знойдзены прыдатны кантролер інструментаў. Перапыненне аперацыі стварэння - + No tool controller, aborting op creation Адсутнічае кантролер інструментаў, перапыняецца аперацыя стварэння @@ -6664,51 +6526,51 @@ Aborting op creation Пакінуць інструмент апушчаным па траекторыі - - + + Arc Дуга - - + + Tangent Датычная - - + + Perpendicular Перпендыкуляр - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Уваход/выхад - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Абраны аб'ект не з'яўляецца траекторыяй руху інструмента @@ -6878,67 +6740,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 Метад нарошчвання магутнасці 1 - + RampMethod2 Метад нарошчвання магутнасці 2 - + RampMethod3 Метад нарошчвання магутнасці 3 - + Helix Спіраль - + Horizontal Feed Rate Хуткасць гарызантальнай падачы - + Vertical Feed Rate Хуткасць вертыкальнай падачы - + Ramp Feed Rate Павелічэнне хуткасць падачы нарастання магутнасці - + Custom Карыстальніцкі - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Абраны аб'ект не з'яўляецца траекторыяй руху інструмента @@ -7142,7 +7004,7 @@ Aborting op creation New Job - New Job + Новае заданне @@ -7614,6 +7476,21 @@ Aborting op creation Mist Распыліць + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8688,7 +8565,7 @@ Aborting op creation Forward - Наперад + Forward @@ -8794,27 +8671,27 @@ Aborting op creation Фігура - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8835,12 +8712,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9129,28 +9006,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9440,4 +9304,60 @@ Aborting op creation Кішэнь + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Шпіндаль + + + + Forward + Forward + + + + Reverse + Перавярнуць + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ca.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ca.ts index 2e7630e963..1c5ca5adb3 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ca.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ca.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Controller - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Fus - - - - Forward - Forward - - - - Reverse - Revers - - - Tool Eina - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Refrigerant - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Atura - - - - + + + + Direction Direcció - + CW Sentit horari - + CCW Sentit antihorari - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel Etiqueta de text @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Profunditat - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Forma - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Cap - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Interior - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Desactiva - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Mode de tall - - + + Climb Climb - - + + Conventional Convencional - + Pattern Patró @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Espiral - + ZigZagOffset ZigZagOffset - + Line Línia - + Grid Quadrícula - + Triangle Triangle - + Angle Angle - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Sortida - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centre de massa - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi passada - + Perpendicular Perpendicular - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Passa al següent - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Vertical - + Thread Thread - + Orientation Orientació - + Type Tipus - + Fit ajusta - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pas - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operació - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Afegeix @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Superfície - - - - Remove - Elimina - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Actualitza - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Profunditats - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Alçàries - - - - Operation - Operació - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Edita - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Edita - + Base Geometry Geometria de base - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Alçàries - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Profunditats - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operació - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Arc - - + + Tangent Tangent - - + + Perpendicular Perpendicular - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Hèlix - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Personalitzat - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Buidar + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Fus + + + + Forward + Forward + + + + Reverse + Revers + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_cs.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_cs.ts index bfc331909a..446f40fc6d 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_cs.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_cs.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Editor Řadiče nástrojů - - Controller - Řadič nástrojů - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Vřeteno - - - - Forward - Dopředu - - - - Reverse - Zpětný chod - - - Tool Nástroj - - - Any modifications only affect this ToolController! - Jakékoli úpravy se týkají pouze tohoto Řadiče nástrojů! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Chladivo - + Type of adaptive operation Typ adaptivní operace - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Řezat uvnitř nebo vně vybraných tvarů - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Pokud je větší než nula, omezuje průměr nájezdu šroubovice, jinak se použije 75 % průměru nástroje - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Jak moc zvednout nástroj při propojovacích rychlopřejezdech přes obrobené oblasti. Pokud není dráha propojení volná, zvedne se nástroj do Přejezdové výšky. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Maximální délka propojovací trasy v Keep-tool-down módu v porovnání s přímou vzdáleností mezi body. Při překročení této délky se propojení provede zvednutím nástroje do Přejezdové výšky. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Velikost bočního posunu nástroje v každém průchodu cyklu, zadaný v % průměru nástroje. Krok přes 100% vede k tomu, že se dva různé průchody nepřekrývají. - + Angle of the helix ramp entry Úhel nájezdu na šroubovici - + Angle of the helix entry cone Úhel vstupního kužele šroubovice @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Stop - - - - + + + + Direction Směr - + CW Pravotočivý - + CCW Levotočivý - + Round joint Kruhový spoj - + Miter joint Úkosový spoj - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Spojit: - + TextLabel Textový popisek @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Výplach - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Hloubka - + Retract Odjezd - + Chip break Chip break - + Dwell Prodleva @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Návrh - + Time Čas @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Ovladač nástrojů - + None Žádný - + Feed retract Posuv odjezdu - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Odjezd z otvoru rychlostí posuvu namísto rychloposuvu - + Start from Začít od - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Uvnitř - + Outside Vně - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Zadejte procento průměru nástroje, o které bude každá šroubovice odsazena vůči předchozí. Odsazení o více než 100% znamená, že se jednotlivé řezy nepřekrývají. - - - + + + Step over percent Krok procentem @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Vypnout - + Boundary Shape Tvar hranice - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Režim řezu - - + + Climb Sousledně - - + + Conventional Nesousledně - + Pattern Vzor @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Režim řezu - předpokládejme na jedné straně nástroje řez, představující výsledný díl, a na druhé straně nástroje buď již ofrézovanou část nebo materiál odstraňovaný až následně. V Climb módu břit nástroje postupuje s každou otáčkou od plného materiálu směrem k řezu (sousledně), zatímco v Conventional módu postupuje břit nástroje od řezu do plného materiálu (nesousledně) - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag Pendlovat - + Spiral Spirála - + ZigZagOffset Pendlovat s ofsetem - + Line Čára - + Grid Mřížka - + Triangle Trojúhelník - + Angle Úhel - + Angle in which the pattern is applied Úhel, pod kterým je aplikován vzor - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Velikost bočního posunu nástroje v každém průchodu cyklu, zadaný v % průměru nástroje. Krok přes 100 % vede k tomu, že se dva různé průchody nepřekrývají - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Množství materiálu, které by mělo zůstat po této operaci vzhledem k cílovému tvaru - + Specify if this operation uses a starting point Určete, zda tato operace používá počáteční bod - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Pokud je tato možnost vybrána, operace používá obrys vybrané základní geometrie a ignoruje všechny otvory a ostrůvky - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Zaškrtněte, zda chcete vynechat oblasti obrábění, které již byly zpracovány předchozími operacemi - + Use rest machining Use rest machining - + Use Start Point Použít počáteční bod - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Výstup - + Enter the filename where the probe points should be written Zadejte název souboru, kam mají být zapsány body sondy - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER Zástupce - - + + The direction in which the profile is performed, clockwise or counterclockwise Směr, ve kterém se profil provádí, pravotočivě nebo levotočivě - + The amount of extra material left by this operation in relation to the target shape Množství zbytkového materiálu, které zůstane po této operaci ve vztahu k cílovému tvaru - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Zaškrtnout, jestli má tato operace používat počáteční bod - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Zaškrtnout, jestli má tato profilová operace zpracovávat také otvory v základní geometrii. Nalezené otvory jsou automaticky odsazeny na opačnou stranu řezu a provedeny v opačném směru jako obvody. Všimněte si, že se toto netýká válcových otvorů, protože se předpokládá, že se budou vrtat - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Zaškrtnout, pokud má tato profilová operace zpracovávat také vnější obvod základních geometrických tvarů - + Use Compensation Použít kompenzaci - + Process Perimeter Zpracovat obvod - - + + Vertex Vrchol - + End Feature Reference Konec reference prvku - + Choose what point to use on the first selected feature Vyberte, který bod se má použít na prvním vybraném prvku @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Těžiště - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Vyberte, který bod se má použít na druhém vybraném prvku - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Kladný prodlužuje začátek dráhy, záporný zkracuje - + Extend Path End Prodloužit konec dráhy - + Positive extends the end of the path, negative shortens Kladná hodnota prodlužuje začátek dráhy, záporná ji zkracuje - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Dokončit operaci jedním průchodem v dané hloubce, nebo více průchody do konečné hloubky - + Single-pass Jeden průchod - + Multi-pass Více průchodů - + Perpendicular Kolmý - + Enable to reverse the cut direction of the slot path Povolit obrácení směru řezu dráhy drážky - + Reverse cut direction Obrátit směr řezu - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Dodatečné X, Y odsazení ohraničujícího kvádru - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Čáry kapkového nástroje jsou vytvořeny rovnoběžně s touto osou. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Nastavení rozlišení vzorkování. Menší hodnoty rychle prodlužují dobu zpracování. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Povolit optimalizaci lineárních drah (kolineární body). Odstraní nepotřebné kolineární body z výstupu G-kódu. - + Enable separate optimization of transitions between, and breaks within, each step over path. Povolit samostatnou optimalizaci přechodů mezi jednotlivými kroky a přerušení v rámci každého kroku. - + Depth offset Ofset hloubky - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Překrytí kroků - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Krok 100% vede k tomu, že se dva různé cykly nepřekrývají. - - + + Sample interval Interval vzoru @@ -2174,114 +2142,119 @@ Výchozí: 3 mm Vertikálně - + Thread Závit - + Orientation Orientace - + Type Typ - + Fit Přizpůsobení - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Stoupání - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operace - + Passes Průchodů - + Discretization Deflection Odklon diskretizace - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Z-offset Dokončovacího průchodu - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Ofset frézy při dokončovacím průchodu. Použijte malou hodnotu jako -0,2 mm, která pomůže odstranit "chlupatý povrch" nebo jiné artefakty. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Dokončovací průchod - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimalizuj pohyby - + Algorithm Algoritmus @@ -2444,17 +2417,17 @@ Pokud je poloměr větší než ten, který podporuje samotný tvar štítku, v Generování značek - + G-Code G-kód - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Přidat @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopírovat z - - - Surface - Povrch - - - - Remove - Odstranit - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Aktualizovat - - - - All objects will be profiled using the same depth and speed settings - Všechny objekty budou profilovány pomocí stejného nastavení hloubky a rychlosti - - - - Depths - Hloubky - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Výšky - - - - Operation - Operace - - - - The tool and its settings to be used for this operation. - Nástroj a jeho nastavení pro tuto operaci. - - - - Algorithm - Algoritmus - Z Depth Correction @@ -4147,17 +3999,17 @@ Výchozí: 3 mm Upravit - + Drag Slider to Simulate Přetáhnout posuvník k simulaci - + Save Project As Uložit projekt jako - + CAMotics Project (*.camotics) Projekt CAMotics (*.camotics) @@ -4194,17 +4046,17 @@ Výchozí: 3 mm Otáčky vřetena - + Selected tool is not a drill Vybraný nástroj není vrták - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Neplatný úhel řezné hrany %.2f, musí být >0° a <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Úhel řezné hrany (%.2f) má za následek zápornou délku hrotu nástroje @@ -4252,12 +4104,12 @@ Výchozí: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s není podporováno pro převrácení - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4433,8 +4285,8 @@ Výchozí: 3 mm - - + + The base toolpath to modify Základní dráha pro k úpravě @@ -4455,90 +4307,90 @@ Výchozí: 3 mm Výška ke zvednutí během rohové akce - + Calculate roll-on to toolpath Vypočítat příjezd k dráze nástroje - + Calculate roll-off from toolpath Vypočítat odjezd od dráhy nástroje - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Vlastní rychlost posuvu - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6343,81 +6195,81 @@ Use property KeepToolDown to change this Pro zabránění operaci v generování kódu, přepněte na False - + Edit Upravit - + Base Geometry Základní geometrie - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Umístění základny - + Heights Výšky - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth nelze pro tuto operaci upravit. Pokud je nutné nastavit FinalDepth ručně, vyberte prosím jinou operaci. - + Depths Hloubky - + Diameters Průměry - + AreaOp Operation Operace AreaOp - + Operation Operace - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6628,51 +6480,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Oblouk - - + + Tangent Tečna - - + + Perpendicular Kolmý - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Zavedení vstup/výstup - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Vybraný objekt není dráha @@ -6842,67 +6694,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Spirála - + Horizontal Feed Rate Horizontální rychlost posuvu - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Vlastní - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Vybraný objekt není dráha @@ -7578,6 +7430,21 @@ Aborting op creation Mist Mlha + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8650,7 +8517,7 @@ Aborting op creation Forward - Dopředu + Forward @@ -8756,27 +8623,27 @@ Aborting op creation Útvar - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8797,12 +8664,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9091,28 +8958,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9402,4 +9256,60 @@ Aborting op creation Kapsa + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Vřeteno + + + + Forward + Forward + + + + Reverse + Obrátit + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_de.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_de.ts index d0b3abbbb0..38d9004f00 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_de.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_de.ts @@ -309,61 +309,10 @@ Für Rohmaterial aus dem Begrenzungsrahmen des Basis-Objekts bedeutet es zusätz Werkzeugsteuerungs-Editor - - Controller - Steuerung - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindel - - - - Forward - vorwärts - - - - Reverse - Umkehren - - - Tool Werkzeug - - - Any modifications only affect this ToolController! - Änderungen betreffen nur diese Werkzeugsteuerung! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Kühlmittel - + Type of adaptive operation Art des adaptiven Vorgangs - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Innerhalb oder außerhalb der ausgewählten Formen schneiden - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Ist der Wert größer als Null, wird der Durchmesser der Helixrampe begrenzt, ansonsten werden 75 Prozent des Werkzeugdurchmessers verwendet - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Wie weit soll das Werkzeug bei schnellen Verbindungsfahrten über freien Flächen angehoben werden? Wenn der Weg für die Verbindungsfahrt nicht frei ist, wird das Werkzeug auf den voreingestellten vertikalen Sicherheitsabstand (Clearance Height) angehoben. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Maximale Länge des Verbindungsweges wenn das Werkzeug auf dem Verbindungsweg möglichst niedrig gehalten werden soll. Sie wird mit der Länge einer direkten Fahrt zwischen Start- und Endpunkt des Verbindungsweges verglichen. Wird diese überschritten, dann wird das Werkzeug auf eine unbedenkliche Höhe (clearance height) angehoben und der Zielpunkt direkt angefahren. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Der Betrag, um den das Werkzeug bei jedem Durchlauf des Musters seitlich verschoben wird, angegeben in Prozent des Werkzeugdurchmessers. Ein Versatz von 100 % führt zu keiner Überlappung zwischen zwei verschiedenen Zyklen. - + Angle of the helix ramp entry Winkel der Helixrampen-Anfahrt - + Angle of the helix entry cone Winkel des Helix-Eintrittskonus @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Beenden - - - - + + + + Direction Richtung - + CW Im Uhrzeigersinn - + CCW Gegen den Uhrzeigersinn - + Round joint Runde Fuge - + Miter joint Gehrungsfuge - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Verbinden: - + TextLabel TextLabel @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Spahnen - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Tiefe - + Retract Rückzug - + Chip break Chip break - + Dwell Verweilzeit @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Form - + Time Zeit @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Werkzeugsteuerung - + None Kein - + Feed retract Vorschub zurückziehen - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Zurückziehen aus dem Loch mit der angegebenen Vorschubgeschwindigkeit statt schneller Bewegung - + Start from Starten ab - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Innen - + Outside Außen - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Den Prozentsatz des Werkzeugdurchmessers angeben, den jede Helix zur vorhergehenden versetzt wird. Ein Schritt über 100% bedeutet keine Überlappung der einzelnen Schnitte. - - - + + + Step over percent Überlappungs-Prozentsatz @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Deaktivieren - + Boundary Shape Begrenzungsform - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Fräsmodus - - + + Climb Gleichlauf - - + + Conventional Gegenlauf - + Pattern Muster @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Der Schneidemodus geht davon aus, dass der Schnitt auf einer Seite des Werkzeugs das resultierende Teil darstellt und die andere Seite entweder bereits weggefräst ist oder später entfernt wird. Im Gleichlaufmodus (Climb mode) wird das Werkzeug bei jeder Umdrehung in den Schnitt bewegt, während im Gegenlaufmodus (Conventional mode) die Drehung des Werkzeuges und die Bewegung des Werkzeugs in dieselbe Richtung gehen - + Pattern the tool bit is moved in to clear the material Werkzeugpfad, auf dem das Werkzeug bewegt wird, um das Material zu entfernen - + ZigZag ZickZack - + Spiral Spirale - + ZigZagOffset ZickZack mit Versatz - + Line Linie - + Grid Raster - + Triangle Dreieck - + Angle Winkel - + Angle in which the pattern is applied Winkel in dem das Muster angewendet wird - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Der Betrag, um den das Werkzeug bei jedem Zyklus des Musters seitlich verschoben wird, angegeben in Prozent des Werkzeugdurchmessers. Ein Versatz von 100 % führt zu keiner Überlappung zwischen zwei verschiedenen Zyklen - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Die Menge an Material, das von dieser Bearbeitung in Bezug auf die Zielform übrig bleiben soll - + Specify if this operation uses a starting point Festlegen, ob diese Bearbeitung einen Startpunkt nutzt - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Wenn aktiviert, verwendet die Bearbeitung die Kontur der ausgewählten Basisgeometrie und ignoriert alle Löcher und Inseln - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Aktivieren, um Bearbeitungsbereiche zu überspringen, die bereits durch vorherige Bearbeitungen entfernt wurden - + Use rest machining Use rest machining - + Use Start Point Startpunkt verwenden - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sondieren - + X offset X offset - + Y offset Y offset - + File name File name - + Output Ausgabe - + Enter the filename where the probe points should be written Den Dateinamen eingeben, unter dem die Messpunkte gespeichert werden sollen - + ProbePoints.txt Sondierungspunkte.txt - - + + PLACEHOLDER PLATZHALTER - - + + The direction in which the profile is performed, clockwise or counterclockwise Die Richtung, in der das Profil ausgeführt wird, im oder gegen den Uhrzeigersinn - + The amount of extra material left by this operation in relation to the target shape Die Menge an zusätzlichem Material, das von dieser Bearbeitung in Bezug auf die Zielform übrig bleibt - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass Bei mehreren Durchgängen der zusätzliche Versatz für jeden weiteren Durchgang - + Check if this operation should use a starting point Festlegen, ob diese Bearbeitung einen Startpunkt nutzt - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Festlegen, ob diese Profilbearbeitung auch Löcher in der Basisgeometrie bearbeiten soll. Gefundene Löcher werden automatisch auf der gegenüberliegenden Schnittseite versetzt und in der entgegengesetzten Richtung als Aussenkontur ausgeführt. Beachten, dass dies nicht für zylindrische Löcher gilt, da davon ausgegangen wird, dass diese gebohrt werden - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Festlegen, ob diese Profilbearbeitung auch den äußeren Umfang der Basisgeometrieformen bearbeiten soll - + Use Compensation Kompensation benutzen - + Process Perimeter Kontur verarbeiten - - + + Vertex Knoten - + End Feature Reference Referenz für End-Feature - + Choose what point to use on the first selected feature Auswählen, welcher Punkt auf das erste ausgewählte Merkmal angewendet werden soll @@ -1742,307 +1710,307 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Massenmittelpunkt - - + + Center of bounding box Mittelpunkt des Begrenzungsrahmens - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Auswählen, welcher Punkt auf dem zweiten ausgewählten Merkmal benutzt werden soll - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Verwendet derzeit benutzerdefinierte Punkteingaben auf der Registerkarte Daten der Eigenschaften-Ansicht - + Currently using custom point inputs available in the property view of the data tab Verwendet derzeit benutzerdefinierte Punkteingaben, die auf der Registerkarte Daten der Eigenschaften-Ansicht vorhanden sind - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positiv verlängert den Anfang des Werkzeugweges, negativ kürzt es - + Extend Path End Pfadende erweitern - + Positive extends the end of the path, negative shortens Positiv erweitert das Ende des Werkzeugwegs, negativ verkürzt ihn - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Die Bearbeitung in einem Durchgang der ausgewählten Tiefe durchführen, oder in mehreren Durchgängen bis zur Zieltiefe - + Single-pass Einzelner Durchlauf - + Multi-pass Mehrfachdurchlauf - + Perpendicular Senkrecht - + Enable to reverse the cut direction of the slot path Aktivieren, um die Schnittrichtung der Nut umzukehren - + Reverse cut direction Fräsrichtung umkehren - - + + Bounding box Begrenzungsrahmen - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Zusätzlicher X-, Y-Versatz des Begrenzungsrahmens - + Additional offset to the selected bounding box along the X axis Zusätzlicher Abstand zum ausgewählten Begrenzungsrahmen entlang der X-Achse - + Additional offset to the selected bounding box along the Y axis Zusätzlicher Abstand zum ausgewählten Begrenzungsrahmen entlang der Y-Achse - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Die Dropcutter-Linien werden parallel zu dieser Achse erstellt. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Setzt die Auflösung der Abtastrate. Kleinere Werte erhöhen schnell die Bearbeitungszeit. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Optimierung linearer Pfade aktivieren (kolineare Punkte). Entfernt unnötige kolineare Punkte aus G-Code-Ausgabe. - + Enable separate optimization of transitions between, and breaks within, each step over path. Die separate Optimierung von Übergängen zwischen überlappenden Pfaden aktivieren. - + Depth offset Tiefenversatz - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Einen Schritt weiter - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Der Betrag, um den das Werkzeug bei jedem Zyklus des Musters seitlich verschoben wird, angegeben in Prozent des Werkzeugdurchmessers. Ein Versatz von 100 % führt zu keiner Überlappung zwischen zwei verschiedenen Zyklen. - - + + Sample interval Messintervall @@ -2170,114 +2138,119 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Vertikal - + Thread Gewinde - + Orientation Ausrichtung - + Type Typ - + Fit Passung - + Major diameter Außendurchmesser - + Minor diameter Innendurchmesser - + Lead in/out Lead in/out - + Pitch Steigung - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI Gewindegänge pro Zoll (inch) - + Operation Bearbeitung - + Passes Durchläufe - + Discretization Deflection Diskretisierungsabweichung - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Dieser Wert wird für die Unterteilung der Bögen in Segmente verwendet. Kleinere Werte führen zu einem größeren G-Code. Größere Werte können zu unerwünschten Segmenten im Linienverlauf führen. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Abschlussdurchlauf Z-Versatz - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Schaftfräser-Versatz fur den Abschlussdurchlauf. Kleine Werte wie beispielsweise -0,2 mm verwenden, um eine "ungleichmäßige Außenhaut" oder andere Artefakte zu säubern. - + After carving, travel again the path to remove artifacts and imperfections Nach dem Fräsen wieder denselben Werkzeugweg abfahren, um Artefakte und Unregelmäßigkeiten zu entfernen - + Finishing pass Abschlussdurchlauf - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Bewegungen optimieren - + Algorithm Algorithmus @@ -2440,17 +2413,17 @@ Wenn der Radius größer ist als der Radius, den der Steg selbst unterstützt, w Steg-Erzeugung - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3223,7 +3196,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Hinzufügen @@ -3263,126 +3235,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopieren von - - - Surface - Oberfläche - - - - Remove - Entfernen - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Aktualisieren - - - - All objects will be profiled using the same depth and speed settings - Alle Objekte werden mit der selben Tiefe und Bewegungsgeschwindigkeit profiliert - - - - Depths - Tiefen - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Höhen - - - - Operation - Bearbeitung - - - - The tool and its settings to be used for this operation. - Das Werkzeug und seine Einstellungen, die für diese Bearbeitung verwendet werden sollen. - - - - Algorithm - Algorithmus - Z Depth Correction @@ -4147,17 +3999,17 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Bearbeiten - + Drag Slider to Simulate Schieberegler zum Simulieren ziehen - + Save Project As Projekt speichern als - + CAMotics Project (*.camotics) CAMotics Projekt (*.camotics) @@ -4194,17 +4046,17 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Spindel-Drehzahl - + Selected tool is not a drill Ausgewähltes Werkzeug ist kein Bohrer - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein - + Cutting Edge Angle (%.2f) results in negative tool tip length Schneidkantenwinkel (%.2f) führt zu negativer Länge der Werkzeugspitze @@ -4252,12 +4104,12 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm isHorizontal(%s) nicht unterstützt - + %s not supported for flipping %s unterstützt keine Spiegelung - + Zero working area to process. Check your selection and settings. Kein verarbeitbarer Arbeitsbereich. Auswahl und Einstellungen überprüfen. @@ -4433,8 +4285,8 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm - - + + The base toolpath to modify Zu ändernder Basis-Werkzeugweg @@ -4455,90 +4307,90 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Anhebehöhe bei Eckenprozess - + Calculate roll-on to toolpath Anfahrt des Werkzeugwegs berechnen - + Calculate roll-off from toolpath Wegfahrt des Werkzeugwegs berechnen - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Schnelles Eintauchen mit G0 - + Angle of ramp Angle of ramp - + Ramping Method Rampenmethode - + Which feed rate to use for ramping Vorschubgeschwindigkeit für die Rampe - + Custom feed rate Benutzerdefinierte Vorschubgeschwindigkeit - + Should the dressup ignore motion commands above DressupStartDepth Sollen Bewegungsbefehle oberhalb von DressupStartDepth ignoriert werden - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Die Tiefe, in der die Rampen aktiviert sind. Darüber hinaus werden Rampen nicht erzeugt, Bewegungsbefehle werden jedoch unverändert weitergegeben. @@ -6342,81 +6194,81 @@ Use property KeepToolDown to change this Abwählen, damit die Bearbeitung keinen Code generiert - + Edit Bearbeiten - + Base Geometry Basisgeometrie - + Multiple operations are labeled as Mehrere Bearbeitungen sind gekennzeichnet als - + Base Location Ausgangsposition - + Heights Höhen - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Die endgültige Tiefe kann für diese Bearbeitung nicht geändert werden. Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, bitte einen anderen Vorgang wählen. - + Depths Tiefen - + Diameters Durchmesser - + AreaOp Operation "AreaOp"-Bearbeitung - + Operation Bearbeitung - + Uncreate AreaOp Operation Rückgängigmachen der "AreaOp" Bearbeitung - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Keine passende Werkzeugsteuerung gefunden. Abbruch der OP-Erstellung - + No tool controller, aborting op creation Keine Werkzeugsteuerung, Abbruch der OP-Erstellung @@ -6627,51 +6479,51 @@ Abbruch der OP-Erstellung Werkzeug auf dem Pfad halten - - + + Arc Kreisbogen - - + + Tangent Tangential - - + + Perpendicular Rechtwinklig - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out An/Abfahrt - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Das ausgewählte Objekt ist kein Werkzeugweg @@ -6841,67 +6693,67 @@ Abbruch der OP-Erstellung CAM_DressupRampEntry - + RampMethod1 RampMethode1 - + RampMethod2 RampMethode2 - + RampMethod3 RampMethode3 - + Helix Wendel - + Horizontal Feed Rate Horizontale Vorschubgeschwindigkeit - + Vertical Feed Rate Vertikale Vorschubgeschwindigkeit - + Ramp Feed Rate Rampen-Vorschubgeschwindigkeit - + Custom Benutzerdefiniert - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Das ausgewählte Objekt ist kein Werkzeugweg @@ -7577,6 +7429,21 @@ Abbruch der OP-Erstellung Mist Nebel + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8649,7 +8516,7 @@ Abbruch der OP-Erstellung Forward - vorwärts + Forward @@ -8755,27 +8622,27 @@ Abbruch der OP-Erstellung Form - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8796,12 +8663,12 @@ Abbruch der OP-Erstellung CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9091,28 +8958,15 @@ oder TPI (Gewindegänge pro Zoll) The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9402,4 +9256,60 @@ oder TPI (Gewindegänge pro Zoll) Vertiefung + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindel + + + + Forward + Forward + + + + Reverse + Umkehren + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_el.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_el.ts index 22e5540907..d331a39a60 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_el.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_el.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Controller - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindle - - - - Forward - Εμπρός - - - - Reverse - Αντιστροφή - - - Tool Εργαλείο - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Coolant - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Διακοπή - - - - + + + + Direction Κατεύθυνση - + CW CW (Δεξιόστροφα) - + CCW CCW (Αριστερόστροφα) - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be χιλιοστά - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel Ετικέτα κειμένου @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Βάθος - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Μορφή - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Κανένα - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inside - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Απενεργοποίηση - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern Μοτίβο @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Σπειροειδές - + ZigZagOffset ZigZagOffset - + Line Γραμμή - + Grid Κάναβος - + Triangle Τρίγωνο - + Angle Γωνία - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Έξοδος - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Κέντρο μάζας - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular Κάθετο - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Αντιστροφή κατεύθυνσης διαδρομής - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Υπέρθεση - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Κατακόρυφα - + Thread Thread - + Orientation Προσανατολισμός - + Type Τύπος - + Fit Προσαρμογή - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Προσθήκη @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Επιφάνεια - - - - Remove - Αφαίρεση - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Ενημέρωση - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Βάθη - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Ύψη - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Επεξεργασία - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Επεξεργασία - + Base Geometry Γεωμετρία Βάσης - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Ύψη - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Βάθη - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Τόξο - - + + Tangent Εφαπτόμενη - - + + Perpendicular Κάθετο - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Έλικα - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Επιλογή - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - Εμπρός + Forward @@ -8758,27 +8625,27 @@ Aborting op creation Σχήμα - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Δημιουργία οπής σε στερεό + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + Αντιστροφή + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_es-ES.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_es-ES.ts index 5c5ef15822..b99b497f69 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_es-ES.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_es-ES.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Editor de Controlador de Herramienta - - Controller - Controlador - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Husillo - - - - Forward - Adelante - - - - Reverse - Invertir - - - Tool Herramienta - - - Any modifications only affect this ToolController! - ¡Cualquier modificación solo afecta a este Controlador de Herramientas! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Refrigerante - + Type of adaptive operation Tipo de operación adaptativa - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cortar por dentro o por fuera de las formas seleccionadas - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Si es mayor de cero, limita el diámetro de rampa de hélice, de lo contrario se utiliza el 75 por ciento del diámetro de la herramienta - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Cuánto levantar la herramienta durante los movimientos rápidos sobre las regiones despejadas. Si la trayectoria de enlace no está despejada se eleva a la altura de seguridad. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Longitud máxima de la trayectoria de enlace de mantenimiento de herramientas hacia abajo en comparación con la distancia directa entre puntos. Si se excede, el enlace se hará elevando la herramienta a la altura de seguridad. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. La cantidad que la herramienta se desplaza lateralmente en cada pasada de las trayectorias, especificado en el porcentaje del diámetro de la herramienta. Un paso del 100% resulta en una no superposición entre dos ciclos diferentes. - + Angle of the helix ramp entry Ángulo de la entrada de la rampa de hélice - + Angle of the helix entry cone Ángulo del cono de entrada de hélice @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Parar - - - - + + + + Direction Dirección - + CW CW - + CCW Sentido antihorario - + Round joint Esquina redondeada - + Miter joint Esquina en pinta - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Unir: - + TextLabel Etiqueta Texto @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Picotear - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Profundidad - + Retract Retraer - + Chip break Chip break - + Dwell Interrupción @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Formulario - + Time Tiempo @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ControladorDeHerramientas - + None Ninguno - + Feed retract Avance de la retracción - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Salida del agujero a la velocidad de avance especificada en lugar de un movimiento rápido - + Start from Empezar desde - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Interior - + Outside Fuera - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Especifica el porcentaje del diámetro de la herramienta que cada pasada de la hélice será desfasado al anterior. Un paso de 100% significa que no hay superposición de los cortes individuales. - - - + + + Step over percent Porcentaje de Pasada @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Deshabilitar - + Boundary Shape Forma Límite - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Modo de Corte - - + + Climb En concordancia - - + + Conventional Convencional - + Pattern Patrón @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction El modo de corte asume que el corte en un lado de la punta de la herramienta muestra la parte resultante y el otro ya está fresado o será eliminado más adelante. El modo en concordancia es cuando la punta de la herramienta se mueve hacia el corte en cada rotación, mientras que en el modo convencional/en oposición la rotación de la punta' de la herramienta y el movimiento lateral de la herramienta están en la misma dirección - + Pattern the tool bit is moved in to clear the material Trayectoria que sigue la punta de la herramienta para quitar el material - + ZigZag ZigZag - + Spiral Espiral - + ZigZagOffset ZigZagDesfase - + Line Línea - + Grid Cuadrícula - + Triangle Triángulo - + Angle Ángulo - + Angle in which the pattern is applied Ángulo en el que se aplica el patrón - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles La cantidad que la herramienta se desplaza en cada pasada lateral del ciclo, especificada en el porcentaje del diámetro de la herramienta. Una pasada por encima del 100% resulta en una no superposición entre dos ciclos diferentes - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape La cantidad de material que debe dejar esta operación en relación con la forma deseada - + Specify if this operation uses a starting point Especificar si esta operación utiliza coordenada de superficie - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Si se selecciona la operación utiliza el contorno de la geometría base seleccionada e ignora todos los agujeros e islas - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Marcar para omitir regiones de mecanizado que ya han sido mecanizadas en operaciones anteriores - + Use rest machining Use rest machining - + Use Start Point Usar Punto Inicial - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Salida - + Enter the filename where the probe points should be written Introduzca el nombre del archivo donde deben escribirse los puntos de la palpación - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER Marcador de posición - - + + The direction in which the profile is performed, clockwise or counterclockwise La dirección en la que se realiza el perfil, en sentido horario o en sentido antihorario - + The amount of extra material left by this operation in relation to the target shape La cantidad de demasía en esta operación en relación con la forma final - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass Si se hacen múltiples pasadas, el desfase extra de cada pasada adicional - + Check if this operation should use a starting point Compruebe si esta operación debe usar una coordenada de partida - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Compruebe si esta operación de perfil también debe procesar agujeros en la geometría base. Los orificios encontrados se desfasan automáticamente en el lado opuesto del corte y se realizan en la dirección opuesta como perímetros. Tenga en cuenta que esto no incluye agujeros cilíndricos, asumiendo que serán perforados - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Evalúa si esta operación de perfil también debe procesar el perímetro exterior de las formas de geometría base - + Use Compensation Usar Compensación - + Process Perimeter Procesar Perímetro - - + + Vertex Vértice - + End Feature Reference Finalizar Referencia de Características - + Choose what point to use on the first selected feature Elija el punto a utilizar en la primera característica seleccionada @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centro de masas - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Elija el punto a utilizar en la segunda característica seleccionada - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Un valor positivo extiende el comienzo de la trayectoria, un valor negativo la acorta - + Extend Path End Extender Trayectoria Final - + Positive extends the end of the path, negative shortens Un valor positivo extiende el final de la trayectoria, un valor negativo la acorta - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Completar la operación en una sola pasada de profundidad, o en múltiples pasadas hasta la profundidad final - + Single-pass Pasada única - + Multi-pass Multi pasada - + Perpendicular Perpendicular - + Enable to reverse the cut direction of the slot path Activar para invertir la dirección de corte de la trayectoria de la ranura - + Reverse cut direction Invertir dirección de corte - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Desfase extra X, Y del cuadro delimitador - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Las líneas de corte se crean paralelas a este eje. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Establece la resolución de muestreo. Los valores más pequeños aumentan rápidamente el tiempo de procesamiento. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Habilitar la optimización de trayectorias lineales (puntos colineales). Elimina puntos colineales innecesarios a partir del código de salida. - + Enable separate optimization of transitions between, and breaks within, each step over path. Habilitar la optimización por separado de las transiciones entre, y las pausas en, cada pasada sobre la trayectoria. - + Depth offset Desfase de profundidad - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Pasar al siguiente - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Un paso por encima del 100% da como resultado que no haya superposición entre dos pasadas diferentes. - - + + Sample interval Intervalo de Muestra @@ -2172,114 +2140,119 @@ Por defecto: 3 mm Vertical - + Thread Rosca - + Orientation Orientación - + Type Tipo - + Fit Ajustar - + Major diameter Diámetro mayor - + Minor diameter Diámetro menor - + Lead in/out Lead in/out - + Pitch Paso - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI Hilos por pulgada - + Operation Operación - + Passes Pasadas - + Discretization Deflection Deflexión de Discretización - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Desfase Z para pasada de acabado - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Desfase de la fresa para la pasada de acabado. Utilice un valor pequeño como -0,2 mm para ayudar a limpiar las vibraciones u otras imperfecciones. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Pasada de acabado - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimizar movimientos - + Algorithm Algoritmo @@ -2442,17 +2415,17 @@ Si el radio es mayor que el que soporta la forma de la etiqueta, la forma result Generación de Etiquetas - + G-Code Código G - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Añadir @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copiar Desde - - - Surface - Superficie - - - - Remove - Quitar - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Actualizar - - - - All objects will be profiled using the same depth and speed settings - Todos los objetos serán perfilados usando la misma profundidad y configuración de velocidad - - - - Depths - Profundidades - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Alturas - - - - Operation - Operación - - - - The tool and its settings to be used for this operation. - La herramienta y sus ajustes que se usarán para esta operación. - - - - Algorithm - Algoritmo - Z Depth Correction @@ -4149,17 +4001,17 @@ Por defecto: 3 mm Editar - + Drag Slider to Simulate Arrastre la barra para simular - + Save Project As Guardar Proyecto Como - + CAMotics Project (*.camotics) Proyecto CAMotics (*.camotics) @@ -4196,17 +4048,17 @@ Por defecto: 3 mm RPM del husillo - + Selected tool is not a drill La herramienta seleccionada no es un taladro - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Ángulo de corte no válido %.2f, debe ser >0° y <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length El ángulo de esquina de corte (%.2f) da como resultado una longitud de punta negativa de la herramienta @@ -4254,12 +4106,12 @@ Por defecto: 3 mm isHorizontal(%s) no soportado - + %s not supported for flipping %s no es compatible para voltear - + Zero working area to process. Check your selection and settings. No hay áreas de trabajo que procesar. Compruebe la selección y la configuración. @@ -4435,8 +4287,8 @@ Por defecto: 3 mm - - + + The base toolpath to modify La trayectoria de herramienta base a modificar @@ -4457,90 +4309,90 @@ Por defecto: 3 mm Altura a levantar durante la acción de la esquina - + Calculate roll-on to toolpath Calcular entrada gradual hacia trayectoria de herramienta - + Calculate roll-off from toolpath Calcular salida gradual desde trayectoria de herramienta - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Realizar profundizaciones con G0 - + Angle of ramp Angle of ramp - + Ramping Method Tipo de rampa - + Which feed rate to use for ramping Qué velocidad de avance usar para la rampa - + Custom feed rate Avance personalizado - + Should the dressup ignore motion commands above DressupStartDepth El constructor puede detener el comando de movimiento antes de DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. La profundidad a la que se permite la entrada en rampa. Por encima de esto, no se crean rampas, pero se pasan los comandos de movimiento. @@ -6345,80 +6197,80 @@ Use property KeepToolDown to change this Marcar como falso, para evitar que la operación genere código - + Edit Editar - + Base Geometry Base de la geometría - + Multiple operations are labeled as Múltiples operaciones están etiquetadas como - + Base Location Ubicación base - + Heights Alturas - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth no se puede modificar para esta operación. Si es necesario ajustar manualmente el FinalDepth por favor, seleccione una operación diferente. - + Depths Profundidades - + Diameters Diámetros - + AreaOp Operation Operación AreaOp - + Operation Operación - + Uncreate AreaOp Operation Revertir operación AreaOp - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No se ha encontrado ningún controlador de herramienta adecuado. Abortando la creación de la op - + No tool controller, aborting op creation Ningún controlador de herramienta, abortando la op de creación @@ -6629,51 +6481,51 @@ Abortando la creación de la op Conserva la herramienta en el camino - - + + Arc Arco - - + + Tangent Tangente - - + + Perpendicular Perpendicular - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Llevar dentro/afuera - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath El objeto seleccionado no es una trayectoria de herramienta @@ -6843,67 +6695,67 @@ Abortando la creación de la op CAM_DressupRampEntry - + RampMethod1 Modo de rampa 1 - + RampMethod2 Modo de rampa 2 - + RampMethod3 Modo de rampa 3 - + Helix Hélice - + Horizontal Feed Rate Velocidad de avance horizontal - + Vertical Feed Rate Velocidad de avance vertical - + Ramp Feed Rate Velocidad de avance de rampa - + Custom Personalizado - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath El objeto seleccionado no es una trayectoria de herramienta @@ -7579,6 +7431,21 @@ Abortando la creación de la op Mist Neblina + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8651,7 +8518,7 @@ Abortando la creación de la op Forward - Adelante + Forward @@ -8757,27 +8624,27 @@ Abortando la creación de la op Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8798,12 +8665,12 @@ Abortando la creación de la op CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9092,28 +8959,15 @@ Abortando la creación de la op The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9403,4 +9257,60 @@ Abortando la creación de la op Vaciado + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Husillo + + + + Forward + Forward + + + + Reverse + Invertir + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_eu.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_eu.ts index 004e07d780..4cc34cff0e 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_eu.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_eu.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tresna-kontrolagailuaren editorea - - Controller - Kontrolagailua - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Haxa - - - - Forward - Aurrera - - - - Reverse - Alderantzizkatu - - - Tool Tresna - - - Any modifications only affect this ToolController! - Edozein aldaketak tresna-kontrolagailu honi soilik eragiten dio! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Hozgarria - + Type of adaptive operation Eragiketa moldakorraren mota - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Moztu hautatutako formen barrutik edo kanpotik - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Zero baino handiagoa bada, helize-arrapalaren diametroa mugatzen du; bestela, tresna-diametroaren ehuneko 75a erabiliko da - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Zenbat jasoko den tresna eskualde garbituen gaineko estekatze-mugimendu azkarretan. Estekatze-bidea ez badago argi, tresna garbitze-altuerara jasoko da. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Tresna behean mantentzeko esteka-bidearen luzera maximoa, puntuen arteko distantzia zuzenarekin konparatuta. Gainditzen bada, tresna garbitze-altueraraino igota sortuko da esteka. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Tresna saiheska zenbat desplazatuko den ereduaren ziklo bakoitzean. Gainditzea % 100ekoa bada, ez da gainjartzerik egongo zikloen artean. - + Angle of the helix ramp entry Helize-arrapalaren sarreraren angelua - + Angle of the helix entry cone Helizearen sarrera-konoaren angelua @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Gelditu - - - - + + + + Direction Norabidea - + CW erlojuaren noranzkoan - + CCW erlojuaren noranzkoaren aurka - + Round joint Elkargune biribildua - + Miter joint Elkargune zorrotza - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Elkartzea: - + TextLabel Testu-etiketa @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Txirbiltzea - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Sakonera - + Retract Atzeratu - + Chip break Chip break - + Dwell Itxaron @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Inprimakia - + Time Denbora @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Tresna-kontrolagailua - + None Bat ere ez - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Hasi hemendik: - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Barruan - + Outside Kanpoan - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Zehaztu helize bakoitza tresna-diametroaren zein ehunekotan desplazatuko den aurreko helizearekiko.Gainditzea % 100ekoa bada, ez da gainjartzerik egongo banakako mozteen artean. - - - + + + Step over percent Gainditze-ehunekoa @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Desgaitu - + Boundary Shape Muga-forma - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Mozte-modua - - + + Climb Igoera - - + + Conventional Konbentzionala - + Pattern Eredua @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Tresna atalak materiala garbitzeko erabiliko duen eredua - + ZigZag Sigi-saga - + Spiral Espirala - + ZigZagOffset ZigZag desplazamendua - + Line Lerroa - + Grid Sareta - + Triangle Triangelua - + Angle Angelua - + Angle in which the pattern is applied Eredua zein angelurekin aplikatuko den - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Tresna saiheska zenbat desplazatuko den ereduaren ziklo bakoitzean. Gainditzea % 100ekoa bada, ez da gainjartzerik egongo bi ziklo desberdinen artean - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Eragiketa honek utzi beharko duen material gehigarriaren kantitatea, helburuko formarekin alderatuta - + Specify if this operation uses a starting point Zehaztu eragiketa honek hasierako puntu bat erabiltzen duen - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Hau hautatuta badago, eragiketak hautatutako oinarri-geometriaren eskema erabiliko du eta zulo eta uharte guztiei ez ikusiarena egingo die - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Markatu hau aurreko eragiketekin garbitu diren mekanizazio-eskualdeak saltatzeko - + Use rest machining Use rest machining - + Use Start Point Erabili hasiera-puntua - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Haztatu - + X offset X offset - + Y offset Y offset - + File name File name - + Output Irteera - + Enter the filename where the probe points should be written Sartu hemen haztatze-puntuak idazteko erabiliko den fitxategiaren izena - + ProbePoints.txt HaztatzePuntuak.txt - - + + PLACEHOLDER LEKU-MARKA - - + + The direction in which the profile is performed, clockwise or counterclockwise Profila sortzeko erabiliko den den norabidea, erloju-orratzen noranzkoan edo aurka - + The amount of extra material left by this operation in relation to the target shape Eragiketa honek utzi duen material gehigarriaren kantitatea, helburuko formarekin alderatuta - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Markatu hau eragiketa honek hasierako puntu bat erabiliko badu - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Markatu hau profilatze-eragiketak oinarri-geometriako zuloak ere prozesatu behar baditu. Aurkitutako zuloak automatikoki aurkako mozte-aldera desplazatuko dira eta aurkako norabidean gauzatuko dira perimetro gisa. Kontuan izan horrek ez dituela zulo zilindrikoak hartzen, horiek zulatu egingo direla suposatzen baita - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Markatu profil-eragiketa honek oinarrizko geometria-formen kanpoko perimetroa ere prozesatu beharko balu - + Use Compensation Erabili konpentsazioa - + Process Perimeter Prozesatu perimetroa - - + + Vertex Erpina - + End Feature Reference Amaierako ezaugarri-erreferentzia - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Masa-zentroa - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Luzatu bidearen amaiera - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Pasaldi bakarra - + Multi-pass Pasaldi anitz - + Perpendicular Perpendikularra - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Alderantzikatu mozte-norabidea - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Muga-koadroaren X, Y desplazamendu gehigarria - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Erortze-ebakigailuaren lerroak ardatz honen paraleloan sortzen dira. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Ezarri laginketa-bereizmena. Balio txikiagoak prozesatze-denbora asko handitzen dute. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Gaitu bide linealen optimizazioa (puntu lerrokideak). Beharrezkoak ez diren puntu lerrokideak kentzen ditu G-code irteeratik. - + Enable separate optimization of transitions between, and breaks within, each step over path. Gaitu gainditze-bide bakoitzeko tarteko trantsizioen eta barneko etenen optimizazio bereiztuak. - + Depth offset Sakoneraren desplazamendua - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Urrats bat aurrera - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Gainditzea % 100ekoa bada, ez da gainjartzerik egongo zikloen artean. - - + + Sample interval Lagin-tartea @@ -2172,114 +2140,119 @@ Balio lehenetsia: 3 mm Bertikala - + Thread Haria - + Orientation Orientazioa - + Type Mota - + Fit Doitu - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Buruzkatze - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Eragiketa - + Passes Pasaldiak - + Discretization Deflection Diskretizazio-makurdura - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algoritmoa @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Etiketen sorrera - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Gehitu @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopiatu hemendik: - - - Surface - Gainazala - - - - Remove - Kendu - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Eguneratu - - - - All objects will be profiled using the same depth and speed settings - Objektu guztiak sakonera- eta abiadura-ezarpen berak erabilita profilatuko dira - - - - Depths - Sakonerak - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Altuerak - - - - Operation - Eragiketa - - - - The tool and its settings to be used for this operation. - Eragiketa honetan erabiliko den tresna eta bere ezarpenak. - - - - Algorithm - Algoritmoa - Z Depth Correction @@ -4149,17 +4001,17 @@ Balio lehenetsia: 3 mm Editatu - + Drag Slider to Simulate Arrastatu graduatzailea simulatzeko - + Save Project As Gorde proiektua honela: - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Balio lehenetsia: 3 mm Haxaren RPMa - + Selected tool is not a drill Hautatutako tresna ez da zulagailua - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du - + Cutting Edge Angle (%.2f) results in negative tool tip length Mozte-ertzaren angeluak (%.2f) tresna-puntaren luzera negatiboa ematen du @@ -4254,12 +4106,12 @@ Balio lehenetsia: 3 mm isHorizontal(%s) ez da onartzen - + %s not supported for flipping %s ez da onartzen iraulketarako - + Zero working area to process. Check your selection and settings. Ez dago laneko arearik prozesatzeko. Begiratu zure hautapena eta ezarpenak. @@ -4435,8 +4287,8 @@ Balio lehenetsia: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Balio lehenetsia: 3 mm Izkina-ekintzan igoko den altuera - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Murgiltzeak gauzatzen ditu G0-rekin - + Angle of ramp Angle of ramp - + Ramping Method Arrapala sortzeko metodoa - + Which feed rate to use for ramping Zein elikatze-abiadura erabili arrapala sortzeko - + Custom feed rate Elikatze-abiadura pertsonalizatua - + Should the dressup ignore motion commands above DressupStartDepth Jantziak jantziaren hasierako sakonera baino handiagoak diren mugimendu-komandoak ezikusiko dituen ala ez - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Arrapalaren jantzia zein sakoneran gaituko den. Honetatik gora, arrapalak ez dira sortzen, baina mugimendu-komandoak bere horretan igarotzen dira. @@ -6344,81 +6196,81 @@ Use property KeepToolDown to change this Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu - + Edit Editatu - + Base Geometry Oinarri-geometria - + Multiple operations are labeled as Eragiketa anitz honela etiketatu dira: - + Base Location Oinarri-kokapena - + Heights Altuerak - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Azken sakonera ezin da aldatu eragiketa honetarako. Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat. - + Depths Sakonerak - + Diameters Diametroak - + AreaOp Operation AreaOp eragiketa - + Operation Eragiketa - + Uncreate AreaOp Operation Desegin AreaOp eragiketa - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Ez da tresna-kontrolagailu egokirik aurkitu. Aukeren sorrera abortatzen - + No tool controller, aborting op creation Ez dago tresna-kontrolagailurik, aukeren sorrera abortatzen @@ -6629,51 +6481,51 @@ Aukeren sorrera abortatzen Mantendu tresna bidean - - + + Arc Arkua - - + + Tangent Tangentea - - + + Perpendicular Perpendikularra - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Sarrera/Irteera - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6843,67 +6695,67 @@ Aukeren sorrera abortatzen CAM_DressupRampEntry - + RampMethod1 1. arrapala-metodoa - + RampMethod2 2. arrapala-metodoa - + RampMethod3 3. arrapala-metodoa - + Helix Helizea - + Horizontal Feed Rate Elikatze-tasa horizontala - + Vertical Feed Rate Elikatze-tasa bertikala - + Ramp Feed Rate Arrapalaren elikatze-tasa - + Custom Pertsonalizatua - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7579,6 +7431,21 @@ Aukeren sorrera abortatzen Mist Lanbroa + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8651,7 +8518,7 @@ Aukeren sorrera abortatzen Forward - Aurrera + Forward @@ -8757,27 +8624,27 @@ Aukeren sorrera abortatzen Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8798,12 +8665,12 @@ Aukeren sorrera abortatzen CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9092,28 +8959,15 @@ Aukeren sorrera abortatzen The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9403,4 +9257,60 @@ Aukeren sorrera abortatzen Poltsa + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Haxa + + + + Forward + Forward + + + + Reverse + Alderantzizkatu + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_fi.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_fi.ts index 5158a25d18..2cd146f9cf 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_fi.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_fi.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Controller - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindle - - - - Forward - Forward - - - - Reverse - Käänteinen - - - Tool Työkalu - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Coolant - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Pysäytä - - - - + + + + Direction Suunta - + CW VP - + CCW Vastapäivään - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel TekstiSelite @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Syvyys - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Lomake - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Ei mitään - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inside - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Ota pois käytöstä - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern Pattern @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Spiraali - + ZigZagOffset ZigZagOffset - + Line Viiva - + Grid Ruudukko - + Triangle Kolmio - + Angle Kulma - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Tuloste - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Kärkipiste - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Massakeskipiste - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular Kohtisuora - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Askella yli - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Pystysuora - + Thread Thread - + Orientation Suunta - + Type Tyyppi - + Fit Sovita - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Lisää @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Pinta - - - - Remove - Poista - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Päivitä - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Syvyydet - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Korkeudet - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Muokkaa - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Tallenna projekti nimellä - + CAMotics Project (*.camotics) CAMotics-projekti (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Muokkaa - + Base Geometry Base Geometry - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Korkeudet - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Syvyydet - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Kaari - - + + Tangent Tangenttina - - + + Perpendicular Kohtisuora - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Kierre - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Mukautettu - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation Muoto - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Tasku + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + Käänteinen + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_fr.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_fr.ts index 6645606c75..e2e310f476 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_fr.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_fr.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Éditeur du contrôleur d'outil - - Controller - Contrôleur - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Vitesse de la broche - - - - Forward - Sens horaire - - - - Reverse - Sens anti-horaire - - - Tool Outil - - - Any modifications only affect this ToolController! - Les modifications n'affectent que ce contrôleur d'outil ! - Tool Editor @@ -957,7 +906,7 @@ La réinitialisation supprime tous les éléments de la liste et remplit la list - + Tool Controller @@ -971,12 +920,12 @@ La réinitialisation supprime tous les éléments de la liste et remplit la list Refroidissement - + Type of adaptive operation Type d'opération adaptative - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -986,37 +935,37 @@ Des valeurs plus élevées (plus à droite) permettent de calculer plus rapideme Des valeurs plus petites (plus à gauche) permettent des parcours d'outils plus précis. - + Cut inside or outside of the selected shapes Couper à l'intérieur ou à l'extérieur des formes sélectionnées - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Si plus grand que zéro, cela limite le diamètre de la rampe hélicoïdale sinon 75 % du diamètre de l'outil est utilisé - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Hauteur à laquelle il faut élever l'outil lors des déplacements de liaison rapides au-dessus des régions détourées. Si le parcours de liaison n'est pas détouré, l'outil est relevé à la hauteur de détourage. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Longueur maximale du parcours de l'outil maintenu en bas comparé à la distance directe entre les points. En cas de dépassement, la liaison sera effectuée en relevant l'outil à la hauteur du dégagement. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. La quantité de déplacement latéral de l'outil à chaque cycle du modèle, spécifiée en pourcentage du diamètre de l'outil. Un recouvrement de 100% n'entraîne aucun chevauchement entre deux cycles différents. - + Angle of the helix ramp entry Angle de l'entrée de la rampe hélicoïdale - + Angle of the helix entry cone Angle du cône d'entrée hélicoïdal @@ -1034,73 +983,92 @@ Des valeurs plus petites (plus à gauche) permettent des parcours d'outils plus Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1109,57 +1077,57 @@ This option changes that behavior to cut each discrete area to its full depth be Cette option modifie ce comportement pour couper chaque zone discrète sur toute sa profondeur avant de passer à la suivante. - + Order cuts by region Ordonner les coupes par région - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Quantité de matière à laisser suivant l'axe Z (par ex. pour l'opération de finition) - + Stop Arrêter - - - - + + + + Direction Direction - + CW Sens horaire - + CCW dans le sens contraire des aiguilles d'une montre - + Round joint Raccord arrondi - + Miter joint Raccord en onglet - - + + @@ -1173,22 +1141,22 @@ Cette option modifie ce comportement pour couper chaque zone discrète sur toute mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Raccorder : - + TextLabel Étiquette du texte @@ -1203,43 +1171,43 @@ Cette option modifie ce comportement pour couper chaque zone discrète sur toute Keep tool down - + Peck Perçage par débourrage - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Profondeur - + Retract Rétracter - + Chip break Chip break - + Dwell Temporisation @@ -1250,7 +1218,7 @@ Cette option modifie ce comportement pour couper chaque zone discrète sur toute Forme - + Time Temps @@ -1277,61 +1245,61 @@ Cette option modifie ce comportement pour couper chaque zone discrète sur toute Contrôleur d'outils - + None Aucun - + Feed retract Retrait à la vitesse d'avance - + G85: Retract from the hole at the given feedrate instead of rapid move G85 : retrait du trou à la vitesse d'avance indiquée au lieu d'un déplacement rapide - + Start from Démarrer à partir de - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Intérieur - + Outside Extérieur - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Spécifier le pourcentage du diamètre de l'outil que chaque hélice sera décalée par rapport à la précédente. Un recouvrement de 100 % signifie que chaque découpe ne se chevauche pas. - - - + + + Step over percent Pourcentage de recouvrement @@ -1401,12 +1369,12 @@ Cette option modifie ce comportement pour couper chaque zone discrète sur toute Désactiver - + Boundary Shape Forme de la limite - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1415,24 +1383,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Mode de coupe - - + + Climb Avalant - - + + Conventional En opposition - + Pattern Motif @@ -1474,266 +1442,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Le mode de coupe suppose que la coupe d'un côté de l'outil coupant représente la pièce résultante et que l'autre côté est soit déjà fraisé, soit sera enlevé plus tard. On parle de mode avalant lorsque l'outil coupant est déplacé dans la coupe à chaque rotation, alors qu'en mode en opposition, la rotation de l'outil coupant et le mouvement latéral de l'outil sont dans la même direction. - + Pattern the tool bit is moved in to clear the material Motif dans lequel l'outil se déplace pour nettoyer le matériau - + ZigZag Zigzag - + Spiral Spirale - + ZigZagOffset Décalage du zigzag - + Line Ligne - + Grid Grille - + Triangle Triangle - + Angle Angle - + Angle in which the pattern is applied Angle dans lequel le motif est appliqué - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles La valeur du déplacement latéral de l'outil à chaque cycle du motif, spécifiée en pourcentage du diamètre de l'outil. Un recouvrement de 100% n'entraîne aucun chevauchement entre deux cycles différents. - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape La quantité de matériau qui devrait être laissée par cette opération par rapport à la forme cible - + Specify if this operation uses a starting point Spécifier si cette opération utilise un point de départ - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Si cette option est sélectionnée, l'opération utilise le contour de la géométrie de base sélectionnée et ignore tous les trous et îlots - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Vérifier que les zones d'usinage qui ont déjà été détourées par des opérations précédentes seront ignorées - + Use rest machining Use rest machining - + Use Start Point Utiliser le point de départ - + Probe grid points Probe grid points - + X: X : - + Y: Y : - + Probe Sonde - + X offset X offset - + Y offset Y offset - + File name File name - + Output Résultat - + Enter the filename where the probe points should be written Entrer le nom du fichier où les points de la sonde doivent être écrits - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER EMPLACEMENT - - + + The direction in which the profile is performed, clockwise or counterclockwise Le sens dans lequel le profilage est effectué, sens horaire ou anti-horaire - + The amount of extra material left by this operation in relation to the target shape La quantité supplémentaire de matière laissée par cette opération par rapport à la forme prévue - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass En cas de passes multiples, le décalage supplémentaire de chaque passe supplémentaire. - + Check if this operation should use a starting point Vérifier si cette opération doit utiliser un point de départ - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Vérifier si cette opération de profilage doit également traiter les trous dans la géométrie de base. Les trous trouvés sont automatiquement décalés sur le côté coupé opposé et réalisés dans la direction opposée en tant que périmètres. Remarquez que cela n'inclut pas les trous cylindriques, l'hypothèse étant qu'ils seront percés - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Vérifier si cette opération de profilage doit également traiter le périmètre extérieur des formes de géométrie de base - + Use Compensation Utiliser la compensation - + Process Perimeter Traiter le périmètre - - + + Vertex Sommet - + End Feature Reference Référence de l'élément de fin - + Choose what point to use on the first selected feature Choisir le point à utiliser sur la première entité sélectionnée @@ -1743,299 +1711,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centre d'inertie - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choisir le point à utiliser sur la seconde entité sélectionnée - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positif étend le début du parcours, négatif le raccourcit - + Extend Path End Prolonger la fin du parcours - + Positive extends the end of the path, negative shortens Positif étend la fin du parcours, négatif la raccourcit - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Terminer l’opération en une seule passe à la profondeur ou en plusieurs passes jusqu’à la profondeur finale - + Single-pass Une seule passe - + Multi-pass Multi-passes - + Perpendicular Perpendiculaire - + Enable to reverse the cut direction of the slot path Activer l’inversion du sens de la coupe du parcours de la rainure - + Reverse cut direction Inverser la direction de coupe - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Décalage supplémentaire en X, Y de la boîte englobante - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Des lignes du couteau oscillant sont créées parallèlement à cet axe. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Définir la résolution d'échantillonnage. Des valeurs très petites augmentent rapidement le temps de traitement. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Activer l'optimisation des parcours linéaires (points colinéaires). Supprime les points colinéaires inutiles de la génération du G-code. - + Enable separate optimization of transitions between, and breaks within, each step over path. Permettre l'optimisation séparément des transitions entre les étapes et les sauts à l'intérieur à chaque parcours de recouvrement. - + Depth offset Décalage de la profondeur - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Recouvrement - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2044,8 +2012,8 @@ A step over of 100% results in no overlap between two different cycles. Un recouvrement de 100% n'entraîne aucun chevauchement entre deux cycles différents. - - + + Sample interval Intervalle d'échantillonnage @@ -2173,119 +2141,124 @@ Par défaut : 3 mm Vertical - + Thread Filetage - + Orientation Orientation - + Type Type - + Fit Ajuster - + Major diameter Diamètre principal Diamètre nominal Grand diamètre - + Minor diameter Petit diamètre Diamètre secondaire - + Lead in/out Lead in/out - + Pitch Pas - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Opération - + Passes Passes - + Discretization Deflection Écart de discrétisation - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Cette valeur est utilisée pour diviser les arcs en segments. Des valeurs plus petites se traduiront par un G-code plus important. Des valeurs plus élevées peuvent provoquer des segments non désirés dans le parcours de la ligne médiane. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Décalage en Z de la passe de finition - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Décalage de la fraise pour la passe de finition. Utilisez une petite valeur comme -0.2 mm pour nettoyer les "surfaces rugueuses" ou d'autres artefacts. - + After carving, travel again the path to remove artifacts and imperfections Après la gravure, refaire le parcours pour éliminer les artefacts et les imperfections. - + Finishing pass Passe de finition - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimiser les déplacements - + Algorithm Algorithme @@ -2448,17 +2421,17 @@ Si le rayon est plus grand que celui que la forme de l'attache elle-même prend Génération des attaches - + G-Code G-code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3240,7 +3213,6 @@ Si cette liste est vide, cela signifie probablement que vous essayez de créer d - Add Ajouter @@ -3283,126 +3255,6 @@ Les attaches sont automatiquement désactivées si elles se chevauchent avec l'a Copy From Copier depuis - - - Surface - Surface - - - - Remove - Supprimer - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Mettre à jour - - - - All objects will be profiled using the same depth and speed settings - Tous les objets seront profilés en utilisant les mêmes paramètres de profondeur et de vitesse - - - - Depths - Profondeurs - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Hauteurs - - - - Operation - Opération - - - - The tool and its settings to be used for this operation. - L'outil et ses paramètres à utiliser pour cette opération - - - - Algorithm - Algorithme - Z Depth Correction @@ -4164,17 +4016,17 @@ Par défaut : 3 mm Éditer - + Drag Slider to Simulate Glisser le curseur pour simuler - + Save Project As Enregistrer le projet sous - + CAMotics Project (*.camotics) Projet CAMotics (*.camotics) @@ -4211,17 +4063,17 @@ Par défaut : 3 mm Vitesse de rotation du mandrin - + Selected tool is not a drill L’outil sélectionné n’est pas un foret - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° L'angle du bord coupant est non valide %.2f, il doit être > 0° et ≤ 180° - + Cutting Edge Angle (%.2f) results in negative tool tip length L'angle du bord coupant (%.2f) entraîne une longueur négative de la pointe de l'outil @@ -4269,12 +4121,12 @@ Par défaut : 3 mm isHorizontal(%s) non pris en charge - + %s not supported for flipping %s non pris en charge pour le retournement - + Zero working area to process. Check your selection and settings. Aucune zone de travail à traiter. Vérifier vos sélections et réglages. @@ -4450,8 +4302,8 @@ Par défaut : 3 mm - - + + The base toolpath to modify Le parcours de base à modifier @@ -4472,90 +4324,90 @@ Par défaut : 3 mm Hauteur à s'élever lors de l'action aux coins - + Calculate roll-on to toolpath Calculer la transition du parcours - + Calculate roll-off from toolpath Calculer la transition à partir du parcours - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Effectuer des descentes avec G0 - + Angle of ramp Angle of ramp - + Ramping Method Méthode de rampe - + Which feed rate to use for ramping Quelle vitesse d'avance utiliser pour la rampe - + Custom feed rate Personnaliser la vitesse d'avance - + Should the dressup ignore motion commands above DressupStartDepth Si la finition doit ignorer les commandes de mouvement par-dessus la profondeur de départ du parcours de finition - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. La profondeur à laquelle la finition de la rampe d'entrée est activé. Au-dessus de cette profondeur, les rampes ne sont pas générées, mais les commandes de mouvement sont transmises telles quelles. @@ -6360,81 +6212,81 @@ Rotationnel : balayage rotationnel sur le 4ᵉ axe. Mettre à False pour empêcher l'opération de générer du code - + Edit Éditer - + Base Geometry Géométrie de base - + Multiple operations are labeled as Plusieurs opérations sont étiquetées comme - + Base Location Position de base - + Heights Hauteurs - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. La profondeur finale ne peut pas être modifiée pour cette opération. S'il est nécessaire de régler manuellement la profondeur finale, sélectionner une autre opération. - + Depths Profondeurs - + Diameters Diamètres - + AreaOp Operation Opération sur la zone disponible - + Operation Opération - + Uncreate AreaOp Operation Annuler la création de l'opération sur la zone disponible - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Aucun contrôleur d'outils adapté n'a été trouvé. Annulation de la création de l'opération - + No tool controller, aborting op creation Aucun contrôleur d'outil, annulation de la création de l'opération @@ -6645,51 +6497,51 @@ Annulation de la création de l'opération Maintenir l’outil en bas lors du parcours - - + + Arc Arc - - + + Tangent Tangent - - + + Perpendicular Perpendiculaire - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Entrée/sortie - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath L'objet sélectionné n'est pas un parcours d'outil @@ -6858,67 +6710,67 @@ Annulation de la création de l'opération CAM_DressupRampEntry - + RampMethod1 Méthode rampe 1 - + RampMethod2 Méthode rampe 2 - + RampMethod3 Méthode rampe 3 - + Helix Détourer hélicoïdalement - + Horizontal Feed Rate Vitesse d'avance horizontale - + Vertical Feed Rate Vitesse d'avance verticale - + Ramp Feed Rate Vitesse d'avance dans la rampe - + Custom Personnaliser - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath L'objet sélectionné n'est pas un parcours d'outil @@ -7593,6 +7445,21 @@ Annulation de la création de l'opération Mist Brouillard + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8665,7 +8532,7 @@ Annulation de la création de l'opération Forward - Sens horaire + Forward @@ -8771,27 +8638,27 @@ Annulation de la création de l'opération Forme - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8812,12 +8679,12 @@ Annulation de la création de l'opération CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9106,28 +8973,15 @@ Annulation de la création de l'opération The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9419,4 +9273,60 @@ Grand diamètre Cavité + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Vitesse de broche + + + + Forward + Forward + + + + Reverse + Inverser + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_hr.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_hr.ts index 371ad8b257..d93fcd830e 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_hr.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_hr.ts @@ -309,63 +309,10 @@ For stock from the base object's bounding box it means the extra material i Uređivač kontrolera alata - - Controller - Kontroler - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Vreteno - - - - Forward - Naprijed - - - - Reverse - Obrnuto - - - Tool Alat - - - Any modifications only affect this ToolController! - Sve izmjene utječu samo na ovaj Kontroler alata - - - Tool Editor @@ -959,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -973,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Rashladno sredstvo - + Type of adaptive operation Vrsta prilagođene operacije - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -987,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Rezanje odabranog oblika izvana ili iznutra - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Ako je veći od nule, ograničava promjer rampe spirale, inače se koristi 75 posto promjera alata. - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Koliko podići alat tijekom brzih povezujućih pomicanja preko očišćenih područja. Ako putanja povezivanja nije jasna, alat se podiže na visinu prohodnosti. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Maksimalna dužina putanje povezivanja s fiksiranim alatom u odnosu na direktnu udaljenost između točaka. Ako je pređena, povezivanje će se izvršiti podizanjem alata na visinu prohodnosti. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Količina pomaka alata u bočnom smjeru u svakom ciklusu preklapanja uzorka (step over), specificirana u procentima promjera alata. Preklapanje od 100% rezultira bez preklapanja između dva različita ciklusa. - + Angle of the helix ramp entry Kut ulazane rampe spirale (helix) - + Angle of the helix entry cone Kut ulaznog stošca spirale (helix) @@ -1035,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1110,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Stop - - - - + + + + Direction Smjer - + CW u smjeru kazaljke sata - + CCW suprotno smjeru kazaljke sata - + Round joint Zaobljena fuga - + Miter joint Kosa fuga - - + + @@ -1174,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Pridruži: - + TextLabel Tekst oznaka @@ -1204,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Prekidanje - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Dubina - + Retract Povlačenje - + Chip break Chip break - + Dwell Mirovanje @@ -1251,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Obrazac - + Time Vrijeme @@ -1278,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Upravljač alata - + None Prazno - + Feed retract Povlačenje pomaka - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Povlačenje iz rupe zadanom brzinom napredovanja umjesto brzog pomaka - + Start from Počni od - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Unutra - + Outside Vanjsko - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specificirajte postotak promjera alata za koji će se svaki spiralni zavoj pomaknuti u odnosu na prethodni. Preklapanje od 100% znači da nema preklapanja pojedinačnih rezova. - - - + + + Step over percent Preklapanje u procentima @@ -1402,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Onemogući - + Boundary Shape Oblik ograničenja - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1416,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Način rezanja - - + + Climb Uspon - - + + Conventional Konvencionalno - + Pattern Uzorak @@ -1475,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Način rezanja pretpostavlja da rez na jednoj strani nastavka alata predstavlja rezultirajući dio, a druga strana je ili već izbrušena ili će biti uklonjena kasnije. Način sinhronizirano (Climb mode) je kada se nastavak alata pomiče u rez pri svakoj rotaciji, dok su u konvencionalnom načinu rada rotacija alata i bočno pomicanje alata u istom smjeru - + Pattern the tool bit is moved in to clear the material Uzorak za uklanjanje materijala u kome će se pomjerati alatni nastavak - + ZigZag CikCak - + Spiral Spirala - + ZigZagOffset CikCak Pomak - + Line Linija - + Grid Mreža - + Triangle Trokut - + Angle Kut - + Angle in which the pattern is applied Kut sa kojim se primjenjuje uzorak - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Količina pomaka alata u bočnom smjeru u svakom ciklusu uzorka (preklapanje), specificirana u procentima promjera alata. Preklapanje od 100% rezultira bez preklapanja između dva različita ciklusa. - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Količina materijala koja bi trebala ostati nakon ove operacije u odnosu na oblik cilja - + Specify if this operation uses a starting point Odredite treba li ova operacija koristiti početnu točku - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Ako je odabrano, operacija koristi konturu odabrane podloge i ignorira sve rupe i otoke - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Aktivira se preskakanje obrađenih područja koja su već očišćena u prethodnim operacijama - + Use rest machining Use rest machining - + Use Start Point Koristi početnu točku - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Izlaz - + Enter the filename where the probe points should be written Unesite naziv datoteke u koju bi trebali zapisati točke ispitivanja - + ProbePoints.txt TočkeSondiranja.txt - - + + PLACEHOLDER PROSTORNIK - - + + The direction in which the profile is performed, clockwise or counterclockwise Smjer u kojem se profil izvodi, u smjeru kazaljke na satu ili suprotno od smjera kazaljke na satu - + The amount of extra material left by this operation in relation to the target shape Količina od dodatnog materijala koja bi trebala ostati nakon ove operacije u odnosu na oblik cilja - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Provjerite treba li ova operacija koristiti početnu točku - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Provjerite treba li ova operacija profila također obrađivati rupe u osnovnoj geometriji. Pronađene rupe se automatski poravnaju na suprotnoj strani reza i izvode u suprotnom smjeru od perimetara. Imajte na umu da to ne uključuje cilindrične rupe, pretpostavlja se da će se one izbušiti - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Provjerite treba li ova operacija profila također obrađivati vanjski perimetar oblika osnovne geometrije - + Use Compensation Koristi kompenzaciju - + Process Perimeter Obradi opseg (perimetar) - - + + Vertex Vrh - + End Feature Reference Krajnja referenca svojstva - + Choose what point to use on the first selected feature Odaberite točku koju ćete koristiti na prvoj odabranoj značajci. @@ -1746,301 +1712,301 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centar mase - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Odaberite točku koja će se koristiti za drugu odabranu značajku - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Pozitivno produžuje početak staze, negativno skraćuje - + Extend Path End Produži kraj staze - + Positive extends the end of the path, negative shortens Pozitivno produžuje završetak staze, negativno skraćuje - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Dovršite operaciju u jednom prolazu na dubini ili višestrukim prolazima do krajnje dubine - + Single-pass Jedan prolaz - + Multi-pass višestruki prolaz - + Perpendicular Okomito - + Enable to reverse the cut direction of the slot path Omogućite obrtanje smjera glodanja staze utora - + Reverse cut direction Obrnuti smjer glodanja - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Granični okvir dodatni pomak X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Linije spuštajućeg (drop-cutter) glodala stvaraju se paralelno s ovom osi. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Postavite rezoluciju uzorkovanja. Manje vrijednosti brzo povećavaju vrijeme naknadne obrade. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Omogućiti optimizaciju linearnih staza (kolinearnih točaka). Uklanja nepotrebne kolinearne točke iz izvoza G-koda. - + Enable separate optimization of transitions between, and breaks within, each step over path. Omogućite zasebnu optimizaciju prijelaza između i unutar svakog preklapanja staze. - + Depth offset Pomak dubine - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Preklapanje - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2049,8 +2015,8 @@ A step over of 100% results in no overlap between two different cycles. Preklapanje od 100% rezultira bez preklapanja između dva različita ciklusa. - - + + Sample interval Korak uzorka @@ -2178,114 +2144,119 @@ Zadano: "3mm" Okomito - + Thread Navoj - + Orientation Orijentacija - + Type Tip - + Fit ispuni - + Major diameter Vanjski promjer - + Minor diameter Unutarnji promjer - + Lead in/out Lead in/out - + Pitch Otklon - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operacija - + Passes Prolaza - + Discretization Deflection Odstupanje kod diskretizacije - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Završna obrada Z-pomak - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Pomak krajnjeg glodala za završni prolaz. Koristite malu vrijednost kao što je -0,2 mm da biste lakše očistili "mahnu kožu" ili druge artefakte. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Završna obrada - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimizirajte pokrete - + Algorithm Algoritam @@ -2449,17 +2420,17 @@ Ako je polumjer veći od onoga što ga oblik oznake može podržati, rezultantna Stvaranje potpornih mostića - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3232,7 +3203,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Dodaj @@ -3272,126 +3242,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopiraj iz - - - Surface - Površina - - - - Remove - Ukloniti - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Ažuriraj - - - - All objects will be profiled using the same depth and speed settings - Svi objekti bit će profilirani koristeći iste postavke dubine i brzine - - - - Depths - Dubine - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Visine - - - - Operation - Operacija - - - - The tool and its settings to be used for this operation. - Alat i njegove postavke za ovu operaciju. - - - - Algorithm - Algoritam - Z Depth Correction @@ -4155,17 +4005,17 @@ Zadano: "3mm" Uredi - + Drag Slider to Simulate Povući klizač za simulaciju - + Save Project As Spremi projekt kao - + CAMotics Project (*.camotics) Projekt CAMotics (*.camotics) @@ -4202,17 +4052,17 @@ Zadano: "3mm" Brzina vretena Obr./min - + Selected tool is not a drill Odabrani alat nije za bušenje - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Nevažeći kut rezanja ruba %.2f, mora biti >0 ° i <=180 ° - + Cutting Edge Angle (%.2f) results in negative tool tip length Kut rezanja ruba (%.2f) rezultira negativnom duljinom vrha alata @@ -4260,12 +4110,12 @@ Zadano: "3mm" isHorizontal(%s) nije podržano - + %s not supported for flipping %s ne podržava preokreni - + Zero working area to process. Check your selection and settings. Nijedno radno područje za obradu. Provjerite svoj odabir i postavke. @@ -4447,8 +4297,8 @@ Visina potpornih mostića. - - + + The base toolpath to modify Osnovna staza obrade za modifikaciju @@ -4469,90 +4319,90 @@ Visina potpornih mostića. Visina podizanja kod akcije kuta - + Calculate roll-on to toolpath Izračunaj prilaženje do staze obrade - + Calculate roll-off from toolpath Izračunaj odlaženje od staze obrade - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Brzo upuštanje sa GO - + Angle of ramp Angle of ramp - + Ramping Method Metoda Rampe - + Which feed rate to use for ramping Brzina pomicanja za kosinu (rampu) - + Custom feed rate Korisnički prilagođena brzina pomicanja - + Should the dressup ignore motion commands above DressupStartDepth Treba li priprema ignorirati naredbe pokreta iznad DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Dubina na kojoj je omogućeno korištenje rampe. Iznad ove dubine, rampe se ne generiraju, već se naredbe za kretanje propuštaju nepromijenjene. @@ -6375,81 +6225,81 @@ Staza obrade koju treba kopirati Postavite na netočno, da bi spriječili generiranje koda - + Edit Uredi - + Base Geometry Osnovna geometrija - + Multiple operations are labeled as Višestruke operacije označene su kao - + Base Location Osnovna lokacija - + Heights Visine - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Krajnja Dubina se ne može mijenjati za ovu operaciju. Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite drugu operaciju. - + Depths Dubine - + Diameters Promjeri - + AreaOp Operation AreaOp operacija - + Operation Operacija - + Uncreate AreaOp Operation Poništi rad AreaOp operacije - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Nijedno prikladno upravljačko sučelje alata nije pronađeno. Prekidam OP-stvaranje. - + No tool controller, aborting op creation Nema upravljačkog sučelja alata. Prekidam OP-stvaranje. @@ -6660,51 +6510,51 @@ Prekidam OP-stvaranje. Zadrži alat dolje na stazi - - + + Arc Luk - - + + Tangent Tangenta - - + + Perpendicular Okomito - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Primicanje/Odmicanje - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Odabrani objekt nije staza obrade @@ -6873,67 +6723,67 @@ Prekidam OP-stvaranje. CAM_DressupRampEntry - + RampMethod1 RampaMod1 - + RampMethod2 RampaMod2 - + RampMethod3 RampaMod3 - + Helix Spirala - + Horizontal Feed Rate Vodoravna brzina pomaka - + Vertical Feed Rate Okomita brzina pomaka - + Ramp Feed Rate Rampa Brzina pomaka - + Custom Prilagođeno - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Odabrani objekt nije staza obrade @@ -7611,6 +7461,21 @@ Razmotrite specificiranje Materijala obrade Mist Magla + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8689,7 +8554,7 @@ Razmotrite specificiranje Materijala obrade Forward - Naprijed + Forward @@ -8795,27 +8660,27 @@ Razmotrite specificiranje Materijala obrade Oblik - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8836,12 +8701,12 @@ Razmotrite specificiranje Materijala obrade CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9130,28 +8995,15 @@ Razmotrite specificiranje Materijala obrade The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9441,4 +9293,60 @@ Razmotrite specificiranje Materijala obrade Utor + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Vreteno + + + + Forward + Forward + + + + Reverse + Obrnuto + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_hu.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_hu.ts index db0dcc327b..c075109977 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_hu.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_hu.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Szerszámvezérlő szerkesztő - - Controller - Vezérlő - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Orsó - - - - Forward - Előre - - - - Reverse - Fordított - - - Tool Eszköz - - - Any modifications only affect this ToolController! - Bármilyen módosítás csak erre az eszközvezérlőre vonatkozik! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Hűtőfolyadék - + Type of adaptive operation Az adaptív működés típusa - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes A kijelölt alakzatokon belüli vagy kívüli vágás - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used A 75 érték korlátozza a spirál rámpa átmérőjét, különben a szerszám átmérőjének 75% -át használja - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Milyen magasra kell emelni a szerszámot a tisztított területeken végzett gyors összekötő mozgások során. Ha az összekötő út nem szabad, a szerszámot a távolságtartó magasságra emeli. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. A szerszámot lefelé tartó összekötő útvonal maximális hossza a pontok közötti közvetlen távolsághoz képest. Ha túllépi, az összekötés a szerszámnak a biztonsági magasságba történő felemelésével történik. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Az az érték, amellyel a szerszámot oldalirányban mozgatják az egyes mintaciklusokban, a szerszámátmérő százalékában megadva. A 100%-os eltolás megakadályozza, hogy két különböző ciklus átfedje egymást. - + Angle of the helix ramp entry A spirál rámpa belépési szöge - + Angle of the helix entry cone A spirál belépő kúp szöge @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Megállít - - - - + + + + Direction Irány - + CW Órajárás iránya - + CCW Órajárással ellentétes irány - + Round joint Körkörös csatlakozás - + Miter joint Gérvágott kötések - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Csatlakoztatás: - + TextLabel Szövegfelirat @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Vágás - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Mélység - + Retract Visszahúz - + Chip break Chip break - + Dwell Tartózkodik @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Űrlap - + Time Idő @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Eszközvezérlő - + None Egyik sem - + Feed retract Adagolás visszahúzása - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Gyors mozgás helyett visszahúzás a furatból a megadott előtolási sebességgel - + Start from Kezdés innen - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Belső - + Outside Külső - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Adja meg a szerszám átmérőjének százalékát, mellyel minden egyes csavarvonal eltolódik az előzőhöz. A 100%-os túllépése azt jelenti, hogy nincs átfedés az egyes vágások között. - - - + + + Step over percent Lépés a százalék felett @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Letilt - + Boundary Shape Szegély alakzata - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Vágási mód - - + + Climb Emelkedés - - + + Conventional Konvencionális - + Pattern Minta @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction A vágási üzemmód feltételezi, hogy a szerszámhegy egyik oldalán lévő vágás jelenti a keletkező alkatrészt, a másik oldal pedig vagy már el van marva, vagy később kerül eltávolításra. A mászó üzemmód az, amikor a szerszámhegy minden egyes forgásnál a vágásba kerül, míg a hagyományos üzemmódban a szerszámhegy forgása és a szerszám oldalirányú mozgása azonos irányú - + Pattern the tool bit is moved in to clear the material Minta, amelyben a szerszám betétet mozgatják az anyag tisztításához - + ZigZag Cikcakk - + Spiral Spirál - + ZigZagOffset Cikcakk-eltolás - + Line Vonal - + Grid Rács - + Triangle Háromszög - + Angle Szög - + Angle in which the pattern is applied A minta felvitelének szöge - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Az az érték, amellyel a szerszámot oldalirányban mozgatják az egyes mintaciklusokban, a szerszámátmérő százalékában megadva. A 100%-os eltolás megakadályozza, hogy két különböző ciklus átfedje egymást - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Az anyag mennyisége, amely a művelet után a célalakzathoz viszonyítva megmarad - + Specify if this operation uses a starting point Adja meg, hogy ez a művelet kezdőpontot használ-e - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Ha ezt a beállítást választja, a művelet a kijelölt alapgeometria körvonalát használja, és figyelmen kívül hagyja az összes furatot és szigetet - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Ellenőrizze, hogy kihagyja-e azokat a megmunkálási területeket, amelyeket előző műveletekkel már töröltek - + Use rest machining Use rest machining - + Use Start Point Kezdőpont használata - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Szonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Kimenet - + Enter the filename where the probe points should be written Adja meg annak a fájlnak a nevét, amelybe az ellenőrizendő pontokat menteni kell - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER HELYKITÖLTŐ - - + + The direction in which the profile is performed, clockwise or counterclockwise A szelvény végrehajtásának iránya az óramutató járásával megegyező vagy az óramutató járásával ellentétes irányban - + The amount of extra material left by this operation in relation to the target shape A művelet által hátrahagyott többletanyag mennyisége a cél alakzathoz viszonyítva - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass Ha több menetet végez, akkor minden egyes további menet extra eltolódása - + Check if this operation should use a starting point Ellenőrizze, hogy ennek a műveletnek kell-e kiindulási pontot használnia - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled El kell érnie, hogy ez a szelvény művelet az alapgeometriában lévő furatokat is feldolgozza. A megtalált furatok automatikusan eltolódnak a vágás ellentétes oldalára, és a kerülettel ellentétes irányban kerülnek végrehajtásra. Megjegyzendő, hogy ez nem vonatkozik a kör alakú furatokra, mivel ezekről feltételezzük, hogy átfúrva vannak - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Vizsgálja meg, hogy ez a szelvényezési művelet az alapul szolgáló geometriai alakzatok külső kerületét is feldolgozza-e - + Use Compensation Kompenzáció használata - + Process Perimeter Folyamat kontúrja - - + + Vertex Végpont - + End Feature Reference Jellemzők hivatkozás vége - + Choose what point to use on the first selected feature Válassza ki, hogy melyik elemet alkalmazza az első kiválasztott jellemzőre @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Tömegközéppont - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Válassza ki, hogy melyik elemet alkalmazza a második kiválasztott jellemzőre - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Pozitív meghosszabbítja az út elejét, negatív pedig lerövidíti - + Extend Path End Útvonal kiterjesztés vége - + Positive extends the end of the path, negative shortens Pozitív meghosszabbítja az út végét, negatív pedig lerövidíti - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Fejezze be a műveletet egyetlen lépésben a mélységig, vagy több lépésben a végső mélységig - + Single-pass Egyszeres áthaladás - + Multi-pass Több fázisú - + Perpendicular Merőleges - + Enable to reverse the cut direction of the slot path A horony vágási irányának megfordításához aktiválja - + Reverse cut direction Fordított vágási irány - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y A határolókeret extra eltolása X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. A legördülő vonalak ezzel a tengelyekkel párhuzamosan jönnek létre. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Állítsa be a mintavételi sebesség felbontását. A kisebb értékek felgyorsítják a feldolgozási időt. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Megvalósítja az egyenes vonalú pályák (egy vonalba eső pontok) optimalizálását. Eltávolítja a felesleges egy vonalba eső pontokat a generált G-kódból. - + Enable separate optimization of transitions between, and breaks within, each step over path. Engedélyezze az átmenetek külön optimalizálását és törését a pálya minden egyes lépésekkor. - + Depth offset Mélységi eltolás - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Átlép - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A 100%-os eltolás megakadályozza, hogy két különböző ciklus átfedje egymást. - - + + Sample interval Mintavételezés @@ -2170,114 +2138,119 @@ Default: 3 mm Függőleges - + Thread Menet - + Orientation Tájolás - + Type Típus - + Fit Illesztés - + Major diameter Max átmérő - + Minor diameter Min átmérő - + Lead in/out Lead in/out - + Pitch Lejtés - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI Menet per coll (inch) - + Operation Művelet - + Passes Áthaladások - + Discretization Deflection Eltérés az elhajlás miatt - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Ezt az értéket az íves szakaszokra való felosztásakor használjuk. A kisebb értékek nagyobb G-kód fájlt eredményeznek. A nagyobb értékek nem kívánt szakaszokat eredményezhetnek a középvonal útvonalában. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Befejező áthaladás Z eltolás - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. A végfutás befejező passzusának eltolása. Használjon kis értéket, például -0,2 mm-t a " pontatlan hártya " vagy más rendellenességek megtisztításához. - + After carving, travel again the path to remove artifacts and imperfections Metszés után újra járja be az utat, hogy eltávolítsa a maradványokat és a hiányosságokat - + Finishing pass Befejező lépés - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Mozgások optimalizálása - + Algorithm Algoritmus @@ -2440,17 +2413,17 @@ Ha a sugár nagyobb, mint amit maga a címke alakja támogat, akkor az eredmény Csatolási mező generálása - + G-Code G-kód - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3223,7 +3196,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Hozzáad @@ -3263,126 +3235,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Másolás innen - - - Surface - Felület - - - - Remove - Törlés - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Frissítés - - - - All objects will be profiled using the same depth and speed settings - Minden tárgyat ugyanazokkal a mélység- és sebességbeállításokkal szerelvényezünk - - - - Depths - Mélység - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Magasságok - - - - Operation - Művelet - - - - The tool and its settings to be used for this operation. - A művelethez használandó szerszám és beállításai. - - - - Algorithm - Algoritmus - Z Depth Correction @@ -4145,17 +3997,17 @@ Default: 3 mm Szerkesztés - + Drag Slider to Simulate Csúszka húzása a szimuláláshoz - + Save Project As Terv mentése mint - + CAMotics Project (*.camotics) CAMotics terv (*.camotics) @@ -4192,17 +4044,17 @@ Default: 3 mm Orsó fordulatszáma - + Selected tool is not a drill A kijelölt eszköz nem fúró - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közti kell - + Cutting Edge Angle (%.2f) results in negative tool tip length Forgácsoló él szög (%.2f) eredménye negatív szerszám csúcs hossz @@ -4250,12 +4102,12 @@ Default: 3 mm isHorizontal(%s) nem támogatott - + %s not supported for flipping %s nem támogatott az átfordításhoz - + Zero working area to process. Check your selection and settings. Nulla munkaterület a feldolgozáshoz. Ellenőrizze a kiválasztást és a beállításokat. @@ -4431,8 +4283,8 @@ Default: 3 mm - - + + The base toolpath to modify A megváltoztatni kívánt alap pálya útvonal @@ -4453,90 +4305,90 @@ Default: 3 mm Sarok műveletek alatti emelési magasság - + Calculate roll-on to toolpath Előregörgetés kiszámítása az útvonalhoz - + Calculate roll-off from toolpath Visszagörgetés kiszámítása az útvonaltól - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Gyors süllyesztés a G0-val - + Angle of ramp Angle of ramp - + Ramping Method Rámpa módszer - + Which feed rate to use for ramping Futtatáshoz használt adagolási ráta - + Custom feed rate Egyéni előtolási sebesség - + Should the dressup ignore motion commands above DressupStartDepth BeállIndulásiMélység előtt a felépítő megállíthatja a mozgási parancsot - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. A mélység, ahol a rámpa felépítés engedélyezve van. E felett a rámpákat nem hozzák létre, de mozgás parancsok áthaladnak. @@ -6341,81 +6193,81 @@ Use property KeepToolDown to change this Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson - + Edit Szerkesztés - + Base Geometry Alap geometria - + Multiple operations are labeled as Számos művelet van így megjelölve - + Base Location Alap helyzet - + Heights Magasságok - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Végleges-Mélység nem módosítható ehhez a művelethez. Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy másik műveletet. - + Depths Mélység - + Diameters Átmérők - + AreaOp Operation AreaOp művelet - + Operation Művelet - + Uncreate AreaOp Operation Megsemmisített AreaOp művelet - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Nem található megfelelő szerszámvezérlő. Az op-létrehozás megszakítása - + No tool controller, aborting op creation Nincs eszközvezérlő, megszakítja az op létrehozását @@ -6626,51 +6478,51 @@ Az op-létrehozás megszakítása Az eszköz leszorítása az útvonalon - - + + Arc Ív - - + + Tangent Érintő - - + + Perpendicular Merőleges - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Belépés/kilépés - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath A kijelölt tárgy nem szerszámpálya útvonal @@ -6840,67 +6692,67 @@ Az op-létrehozás megszakítása CAM_DressupRampEntry - + RampMethod1 Rámpa mód 1 - + RampMethod2 Rámpa mód 2 - + RampMethod3 Rámpa mód 3 - + Helix Csigavonal - + Horizontal Feed Rate Vízszintes adagolási sebesség - + Vertical Feed Rate Függőleges adagolási sebesség - + Ramp Feed Rate Rámpa adagolási sebesség - + Custom Egyéni - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath A kijelölt objektum nem szerszámpálya útvonal @@ -7576,6 +7428,21 @@ Az op-létrehozás megszakítása Mist Pára + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8648,7 +8515,7 @@ Az op-létrehozás megszakítása Forward - Előre + Forward @@ -8754,27 +8621,27 @@ Az op-létrehozás megszakítása Alakzat - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8795,12 +8662,12 @@ Az op-létrehozás megszakítása CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9089,28 +8956,15 @@ Az op-létrehozás megszakítása The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9400,4 +9254,60 @@ Az op-létrehozás megszakítása Üreg + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Orsó + + + + Forward + Forward + + + + Reverse + Fordított + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_it.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_it.ts index 09860e0ff8..144902f629 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_it.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_it.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Editor Controllore Strumenti - - Controller - Controllore - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Mandrino - - - - Forward - Avanti - - - - Reverse - Inverti - - - Tool Utensile - - - Any modifications only affect this ToolController! - Qualsiasi modifica incide solo questo ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Refrigerante - + Type of adaptive operation Tipo di operazione adattativa - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Valori più grandi (più a destra) saranno calcolati più velocemente; valori più piccoli (più a sinistra) si tradurranno in percorsi strumenti più accurati. - + Cut inside or outside of the selected shapes Taglia all'interno o all'esterno delle forme selezionate - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Se maggiore di zero limita il diametro della rampa dell'elica, altrimenti viene utilizzato il 75 per cento del diametro dell'utensile - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Quanto si deve sollevare l'utensile durante lo spostamento rapido sulle regioni sgomberate. Se percorso non è libero, lo strumento viene innalzato allo sgombero. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Massima distanza del mantenimento basso dell'utensile comparata alla distanza diretta tra i punti. Se viene superato, il collegamento sarà fatto alzando lo strumento all'altezza di sgombero. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Lo spostamento laterale dello strumento su ogni ciclo della ripetizione del percorso, specificato in percentuale del diametro dell'utensile. Un valore oltre il 100% non produce in sovrapposizioni tra due cicli successivi. - + Angle of the helix ramp entry Angolo di entrata della spirale - + Angle of the helix entry cone Angolo conico di entrata della spirale @@ -1033,73 +982,92 @@ Valori più grandi (più a destra) saranno calcolati più velocemente; valori pi Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua piena profondità prima di passare alla successiva. - + Order cuts by region Ordina tagli per regione - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Quanto materiale da lasciare nell'asse Z (per operazioni di finitura) - + Stop Ferma - - - - + + + + Direction Direzione - + CW CW - + CCW CCW - + Round joint Giunto arrotondato - + Miter joint Giunto di mitragliatura - - + + @@ -1172,22 +1140,22 @@ Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua p mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Unisci: - + TextLabel Etichetta Testo @@ -1202,43 +1170,43 @@ Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua p Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Profondità - + Retract Ritira - + Chip break Chip break - + Dwell Pausa(fermata) @@ -1249,7 +1217,7 @@ Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua p Modulo - + Time Tempo @@ -1276,61 +1244,61 @@ Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua p ToolController - + None Nessuno - + Feed retract Retrazione del feed - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retrazione dal foro alla velocità di feed impostata invece del movimento rapido - + Start from Inizia da - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Interno - + Outside Esterno - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specifica la percentuale del diametro dell'utensile che ogni elica sarà spostata rispetto a quella precedente. Un passo oltre il 100% significa che i singili tagli non si sovrappongono. - - - + + + Step over percent Percentuale di sovrapposizione @@ -1400,12 +1368,12 @@ Questa opzione cambia il comportamento di tagliare ogni area discreta alla sua p Disabilita - + Boundary Shape Forma di contorno - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Modalità di Taglio - - + + Climb Salita - - + + Conventional Convenzionale - + Pattern Motivo @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction La modalità di taglio indica in che modo viene eseguita la rotazione del taglio rispetto all'avanzamento dell'utensile. La modalità di salita è quando l'utensile si muove contrariamente al verso del tagliente sul pezzo lavorato, mentre in modalità convenzionale la rotazione dell'utensile e il verso di tagliente sono nella stessa direzione - + Pattern the tool bit is moved in to clear the material Sequenza dove l'utensile è spostato per sgomberare il materiale - + ZigZag ZigZag - + Spiral Spirale - + ZigZagOffset Offset a zig zag - + Line Linea - + Grid Griglia - + Triangle Triangolo - + Angle Angolo - + Angle in which the pattern is applied Angolo su cui la sequenza di percorso viene applicata - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles La quantità di spostamento laterale dell'utensile su ogni ciclo del modello, specificata in percentuale del diametro dell'utensile. Un valore oltre il 100% non produce sovrapposizioni di taglio tra due cicli successivi - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape La quantità di materiale che dovrebbe essere lasciato da questa operazione in relazione alla forma obiettivo - + Specify if this operation uses a starting point Specifica se questa operazione utilizza un punto di partenza - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Se selezionata, l'operazione utilizza il contorno della geometria di base selezionata e ignora tutti i fori e le isole - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Spunta la casella per saltare le regioni di lavorazione che sono già state cancellate dalle operazioni precedenti - + Use rest machining Use rest machining - + Use Start Point Usa Punto Iniziale - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Output - + Enter the filename where the probe points should be written Inserisci il nome del file in cui i punti della sonda devono essere scritti - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER SEGNAPOSTO - - + + The direction in which the profile is performed, clockwise or counterclockwise La direzione in cui la profilatura viene eseguita, in senso orario o antiorario - + The amount of extra material left by this operation in relation to the target shape La quantità di materiale aggiuntivo lasciato da questa operazione in relazione alla forma di destinazione - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Verifica se questa operazione deve usare un punto di partenza - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Controllare se questa operazione di profilatura dovrebbe anche elaborare fori nella geometria di base. I fori trovati vengono automaticamente spostati sul lato di taglio opposto ed eseguiti nella direzione opposta come perimetri. Si noti che questo non include fori cilindrici, il presupposto è che saranno forati - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Verifica se questa operazione di rifilatura dovrebbe anche elaborare il perimetro esterno delle forme geometriche di base - + Use Compensation Usa Compensazione - + Process Perimeter Processa Perimetro - - + + Vertex Vertice - + End Feature Reference Fine del componente di riferimento - + Choose what point to use on the first selected feature Scegliere quale punto usare per la prima funzione selezionata @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centro di massa - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Scegliere quale punto usare per la seconda funzione selezionata - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positivo estende l'inizio del percorso, negativo lo accorcia - + Extend Path End Estendi Fine Percorso - + Positive extends the end of the path, negative shortens Positivo estende la fine del percorso, negativo lo accorcia - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Completa l'operazione con un singolo passaggio in profondità o con più passaggi fino alla profondità finale - + Single-pass Passaggio Singolo - + Multi-pass Multi-pass - + Perpendicular Perpendicolare - + Enable to reverse the cut direction of the slot path Abilita per invertire la direzione del taglio dell'asola - + Reverse cut direction Invertire la direzione di taglio - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Offset extra X,Y del riquadro di delimitazione - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Le linee di taglio sono create parallele a questo asse. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Imposta la risoluzione di campionamento. Valori più piccoli aumentano il tempo di elaborazione. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Abilita l'ottimizzazione dei senti lineari (punti co-lineari). Rimuove punti co-lineari non necessari dall'uscita del G-code. - + Enable separate optimization of transitions between, and breaks within, each step over path. Abilita l'ottimizzazione separata delle transizioni tra un passo e l'altro ad ogni passaggio sul tracciato. - + Depth offset Offset di profondità - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Passo successivo - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Un passo superiore al 100% non comporta sovrapposizioni tra due cicli diversi. - - + + Sample interval Esempio d'intervallo @@ -2172,114 +2140,119 @@ Default: 3 mm Verticale - + Thread Thread - + Orientation Orientamento - + Type Tipo - + Fit Adatta - + Major diameter Diametro maggiore - + Minor diameter Diametro minore - + Lead in/out Lead in/out - + Pitch Passo - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operazione - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Spostamento Z del passaggio finale - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Passo di finitura - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Ottimizza i movimenti - + Algorithm Algoritmo @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3223,7 +3196,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Aggiungi @@ -3263,126 +3235,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copia Da - - - Surface - Superficie - - - - Remove - Rimuovi - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Aggiorna - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Profondità - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Altezze - - - - Operation - Operazione - - - - The tool and its settings to be used for this operation. - Lo strumento e le sue impostazioni da utilizzare per questa operazione. - - - - Algorithm - Algoritmo - Z Depth Correction @@ -4147,17 +3999,17 @@ Default: 3 mm Modifica - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Salva Progetto Come - + CAMotics Project (*.camotics) Progetto CAMotics (*.camotics) @@ -4194,17 +4046,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill L'utensile selezionato non è una punta di foratura - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Angolo di Taglio non valido %.2f, deve essere compreso tra >0° e <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4252,12 +4104,12 @@ Default: 3 mm isHorizontal(%s) non supportato - + %s not supported for flipping %s non supportato per il ribaltamento - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4433,8 +4285,8 @@ Default: 3 mm - - + + The base toolpath to modify Il percorso utensile di base da modificare @@ -4455,90 +4307,90 @@ Default: 3 mm Altezza di sollevamento durante l'azione di angolo - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Esegui le discese con G0 - + Angle of ramp Angle of ramp - + Ramping Method Metodo della rampa - + Which feed rate to use for ramping Quale velocità di avanzamento usare per creare la rampa - + Custom feed rate Velocità di avanzamento personalizzata - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. La profondità a cui è attivata la traiettoria aggiuntiva per la rampa. Al di sopra di essa le rampe non vengono generate, ma i comandi di movimento sono mantenuti così come sono. @@ -6343,81 +6195,81 @@ Use property KeepToolDown to change this Rendere False, per escludere l'operazione dalla generazione del codice - + Edit Modifica - + Base Geometry Geometria Base - + Multiple operations are labeled as Le operazioni multiple sono contrassegnate come - + Base Location Posizione Base - + Heights Altezze - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Profondità - + Diameters Diametri - + AreaOp Operation AreaOp Operation - + Operation Operazione - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Nessun controller di utensile adatto trovato. Interruzione creazione op - + No tool controller, aborting op creation Nessun controller di utensile, interruzione della creazione dell'op @@ -6628,51 +6480,51 @@ Interruzione creazione op Mantenere l'utensile basso nel percorso - - + + Arc Arco - - + + Tangent Tangente - - + + Perpendicular Perpendicolare - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath L'oggetto selezionato non è un percorso utensile @@ -6842,67 +6694,67 @@ Interruzione creazione op CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Elica - + Horizontal Feed Rate Velocità Avanzamento Orizzontale - + Vertical Feed Rate Velocità Avanzamento Verticale - + Ramp Feed Rate Velocità di avanzamento in rampa - + Custom Personalizza - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath L'oggetto selezionato non è un percorso utensile @@ -7578,6 +7430,21 @@ Interruzione creazione op Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8650,7 +8517,7 @@ Interruzione creazione op Forward - Avanti + Forward @@ -8756,27 +8623,27 @@ Interruzione creazione op Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8797,12 +8664,12 @@ Interruzione creazione op CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9091,28 +8958,15 @@ Interruzione creazione op The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9402,4 +9256,60 @@ Interruzione creazione op Tasca + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Mandrino + + + + Forward + Forward + + + + Reverse + Inverti + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ja.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ja.ts index bc4f6fed61..72dbd4b352 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ja.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ja.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i ツールコント ローラーエディター - - Controller - コントローラー - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - スピンドル - - - - Forward - 前進 - - - - Reverse - 反転 - - - Tool ツール - - - Any modifications only affect this ToolController! - 変更はこのツールコントローラーにのみ影響します！ - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul 冷却 - + Type of adaptive operation 自動工程のタイプ - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes 選択した形状の内側または外側を切削 - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used 0より大きい場合はらせん傾斜直径を制限します。それ以外の場合はツール直径の75%が使用されます。 - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. クリア領域上を高速リンク移動する間にどれだけツールを引き上げるか。 リンクパスがクリアでない場合、ツールはクリアランス高さまで上がります。 - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. 点間の直線距離と比較したツール降下維持でのリンク経路の最大長さ。超える場合、リンクはツールをクリアランス高さに上げることで処理されます。 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry らせん傾斜進入の角度 - + Angle of the helix entry cone らせん進入円錐の角度 @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop 停止 - - - - + + + + Direction 方向 - + CW 時計回り - + CCW 反時計回り - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel テキストラベル @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck ペック - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth 深さ - + Retract 引き上げ - + Chip break Chip break - + Dwell 休止 @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be フォーム - + Time 時刻 @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ツールコントローラー - + None なし - + Feed retract 送り速度で引き上げ - + G85: Retract from the hole at the given feedrate instead of rapid move G85: 高速移動の代わりに指定された送り速度で穴から引き上げ - + Start from 開始位置 - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside 内側 - + Outside 外側 - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. ツール直径に対するパーセントを指定。各らせんは直前のらせんからその分だけずれます。重なり率100%は各切削が重ならないことを意味します。 - - - + + + Step over percent 重なり率（％） @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be 無効化 - + Boundary Shape 境界形状 - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode 切削モード - - + + Climb クライム - - + + Conventional 従来型 - + Pattern パターン @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction 切削モードでは、ツールビットの一方の側が切削結果部分を表し、もう一方がすでに切削除去された部分、または後で除去される部分と仮定します。 クライムモードでは、ツールビットを各回転へ切り込む方向へ移動させます。 従来型モードでは、ツールビットの回転とツールの横移動は同じ方向になります。 - + Pattern the tool bit is moved in to clear the material 材料除去でのツールビットの移動パターン - + ZigZag ジグザグ線 - + Spiral 渦巻 - + ZigZagOffset ジグザグのオフセット - + Line 直線 - + Grid グリッド - + Triangle 三角形 - + Angle 角度 - + Angle in which the pattern is applied パターンが適用される角度 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape 対象形状に関連づけられたこの工程によって残される材料の量 - + Specify if this operation uses a starting point この工程が開始点を使用するかどうかを指定 - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point 開始点を使用 - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe プローブ - + X offset X offset - + Y offset Y offset - + File name File name - + Output 出力 - + Enter the filename where the probe points should be written プローブ点を書き込むファイルの名前を入力 - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise プロファイルが実行される方向。時計回りまたは反時計回り。 - + The amount of extra material left by this operation in relation to the target shape 対象形状に関連づけられたこの工程によって残された余分な材料の量 - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point この操作が開始点を使用するかどうかを確認 - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled このプロファイル工程でベースジオメトリーの穴も処理する場合、チェック。 検出された穴は自動的に反対側の切削面にオフセットされ、外周同様に反対方向に処理されます。ドリル処理されることが前提の円筒形の穴は含まれないことに注意してください。 - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes このプロファイル工程がベースジオメトリー形状の外周も処理する場合、チェック - + Use Compensation 補正を使用 - + Process Perimeter 外周を処理 - - + + Vertex 頂点 - + End Feature Reference フィーチャー参照を終了 - + Choose what point to use on the first selected feature 1番目に選択したフィーチャーでどのポイントを使用するか選択 @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass 重心 - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature 2番目に選択したフィーチャーでどのポイントを使用するか選択 - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens 正の値でパス始端を延長、負の値で短縮 - + Extend Path End パス延長の終了 - + Positive extends the end of the path, negative shortens 正の値でパス終端を延長、負の値で短縮 - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth 工程をある深さでの単一パスで完了するか、最終深さまで複数パスで完了するか - + Single-pass 単一パス - + Multi-pass マルチパス - + Perpendicular 直交する|鉛直な - + Enable to reverse the cut direction of the slot path スロットパスの切削方向反転を有効化 - + Reverse cut direction 切削方向を反転 - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y バウンディングボックス追加オフセット X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. ドロップカッターラインは、この軸と平行に作成されます。 - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. サンプリング分解能を設定します。小さい値ほど処理時間が急激に増加します。 - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. 直線パス (同一直線上の点) の最適化を有効化。Gコード出力から不要な同一直線上の点を削除。 - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset 深さオフセット - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over ステップオーバー - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval サンプル間隔 @@ -2172,114 +2140,119 @@ Default: 3 mm 垂直方向 - + Thread ねじ山 - + Orientation 向き - + Type タイプ - + Fit フィット|ぴったり合う|一致する|適合する - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch ピッチ - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI 1インチあたりの山数 - + Operation 工程 - + Passes パス - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. この値は円弧を線分に離散化する際に使用されます。値を小さくするほどGコードは大きくなります。 値を大きくすると内部線パスで望ましくない線分が生じることがあります。 - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset 仕上げパスのZオフセット - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. 仕上げパス実行時のエンドミルのオフセット。「ファジースキン」やその他の加工をきれいにする場合は -0.2 mmといった小さな値を使用してください。 - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass 仕上げパス - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements 動作を最適化 - + Algorithm アルゴリズム @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul タグの生成 - + G-Code Gコード - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add 追加 @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From コピー元 - - - Surface - サーフェス - - - - Remove - 削除 - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - 更新 - - - - All objects will be profiled using the same depth and speed settings - すべてのオブジェクトが同じ深さと速度の設定を使用してプロファイルされます。 - - - - Depths - 深さ - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - 高さ - - - - Operation - 工程 - - - - The tool and its settings to be used for this operation. - この工程で使用されるツールとその設定 - - - - Algorithm - アルゴリズム - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm 編集 - + Drag Slider to Simulate スライダーをドラッグしてシミュレート - + Save Project As 名前を付けてプロジェクトを保存 - + CAMotics Project (*.camotics) CAMoticsプロジェクト (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm スピンドルのRPM - + Selected tool is not a drill 選択されたツールはドリルではありません - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length 切れ刃角 (%.2f) では刃先距離がマイナスになります @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal (%s) はサポートされていません - + %s not supported for flipping %s は反転をサポートしていません - + Zero working area to process. Check your selection and settings. 作業領域がゼロです。選択範囲と設定を確認してください。 @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify 変更するベースツールパス @@ -4457,90 +4309,90 @@ Default: 3 mm コーナーアクション中の上昇高さ - + Calculate roll-on to toolpath ロールオンからツールパスを計算 - + Calculate roll-off from toolpath ツールパスからロールオフを計算 - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 G0でプランジ加工を実行 - + Angle of ramp Angle of ramp - + Ramping Method ランピング加工 - + Which feed rate to use for ramping ランプに使用する送り速度 - + Custom feed rate カスタム送り速度 - + Should the dressup ignore motion commands above DressupStartDepth DressupStartDepth の上ではドレスアップはモーションコマンドを無視します - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this 生成されたコードの工程を止めるにはFalseにします。 - + Edit 編集 - + Base Geometry ベースジオメトリ - + Multiple operations are labeled as 複数の工程が以下のようにラベル付けされています: - + Base Location ベース位置 - + Heights 高さ - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. この操作のためにFinalDepthを変更することができません。 FinalDepthを手動で設定する必要がある場合は別の操作を選択してください。 - + Depths 深さ - + Diameters 直径 - + AreaOp Operation AreaOp工程 - + Operation 工程 - + Uncreate AreaOp Operation AreaOp工程を破棄 - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation パス内のツール降下を維持 - - + + Arc 円弧 - - + + Tangent 正接 - - + + Perpendicular 直交する|鉛直な - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix 螺旋 - + Horizontal Feed Rate 水平方向の送り速度 - + Vertical Feed Rate 垂直方向の送り速度 - + Ramp Feed Rate ランプの送り速度 - + Custom カスタム - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath 選択されたオブジェクトはツールパスではありません @@ -7580,6 +7432,21 @@ Aborting op creation Mist ミスト + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - 前進 + Forward @@ -8758,27 +8625,27 @@ Aborting op creation シェイプ - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation ポケット + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + 反転 + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ka.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ka.ts index 7f51cb044d..a678907ce4 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ka.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ka.ts @@ -29,12 +29,12 @@ Area Workplane - Area Workplane + სამუშაო ფართობი Selects a workplane for a feature area - Selects a workplane for a feature area + მონიშნავს სამუშაო მაგიდას თვისებების ალაგისთვის @@ -126,7 +126,7 @@ Base Model Selection - Base Model Selection + საბაზისო მოდელის არჩევანი @@ -196,12 +196,12 @@ Operation heights - Operation heights + ოპერაციის სიმაღლეები Operation depths - Operation depths + ოპერაციის სიღრმეები @@ -211,7 +211,7 @@ Tool rapid speeds - Tool rapid speeds + ხელსაწყოს სწრაფი გადაადგილების სიჩქარეები @@ -271,7 +271,7 @@ For stock from the base object's bounding box it means the extra material i Hint about the current stock extent setting - Hint about the current stock extent setting + მინიშნება მიმდინარე ყალიბის მასშტაბის პარამეტრზე @@ -286,7 +286,7 @@ For stock from the base object's bounding box it means the extra material i Hint about the current stock placement - Hint about the current stock placement + მინიშნება მიმდინარე ყალიბის მდებარეობაზე @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i ხელსაწყოს კონტროლერის რედაქტორი - - Controller - კონტროლერი - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - შპინდელი - - - - Forward - წინ - - - - Reverse - პირიქით - - - Tool ხელსაწყო - - - Any modifications only affect this ToolController! - ნებოსმიერი ცვლილება მოქმედებს მხოლოდ ამ კონტროლერზე! - Tool Editor @@ -387,7 +336,7 @@ For stock from the base object's bounding box it means the extra material i The category group the property belongs to - The category group the property belongs to + კატეგორიების ჯგუფი, რომელსაც თვისება მიეკუთვნება @@ -397,7 +346,7 @@ For stock from the base object's bounding box it means the extra material i The type of the property value - The type of the property value + თვისების მნიშვნელობის ტიპი @@ -427,7 +376,7 @@ For stock from the base object's bounding box it means the extra material i Check to create several properties in a batch - Check to create several properties in a batch + ჩართეთ, რომ ერთზე მეტი თვისება ერთდროულად შექმნათ @@ -452,7 +401,7 @@ For stock from the base object's bounding box it means the extra material i Adds the existing tool bit to the library - Adds the existing tool bit to the library + დაამატებს არსებულ ხელსაწყოს მჭრელი იარაღს ბიბლიოთეკაში @@ -472,22 +421,22 @@ For stock from the base object's bounding box it means the extra material i Add new tool table - Add new tool table + ახალი ხელსაწყოს ცხრილის დამატება Save the current library - Save the current library + მიმდინარე ბიბლიოთეკის შენახვა Table of tool bits of the library - Table of tool bits of the library + ბიბლიოთეკის ხელსაწყოს მჭრელი იარაღების ცხრილი Close the library editor - Close the library editor + ბიბლიოთეკის რედაქტორის დახურვა @@ -497,7 +446,7 @@ For stock from the base object's bounding box it means the extra material i Tool Parameter Editor - Tool Parameter Editor + ხელსაწყოს პარამეტრების რედაქტორი @@ -540,17 +489,17 @@ For stock from the base object's bounding box it means the extra material i CAM Job Selection - CAM Job Selection + CAM-ის დავალებების არჩევანი Tool Controller Selection - Tool Controller Selection + ხელსაწყოს კონტროლერის არჩევანი Tool controller - Tool controller + ხელსაწყოს კონტროლერი @@ -558,7 +507,7 @@ For stock from the base object's bounding box it means the extra material i Processor Selection - Processor Selection + პოსტპროცესორის არჩევანი @@ -591,17 +540,17 @@ For stock from the base object's bounding box it means the extra material i Create cylinder - Create cylinder + ცილინდრის შექმნა Extend model's bounding box - Extend model's bounding box + მოდელის შემომსაზღვრელი ჩარჩოს გაფართოება Use existing solid - Use existing solid + არსებული მყარი სხეულის გამოყენება @@ -656,7 +605,7 @@ For stock from the base object's bounding box it means the extra material i Constrained to inside - Constrained to inside + შიგნითკენ შეზღუდული @@ -666,7 +615,7 @@ For stock from the base object's bounding box it means the extra material i Radius of the cylinder - Radius of the cylinder + ცილინდრის რადიუსი @@ -677,7 +626,7 @@ For stock from the base object's bounding box it means the extra material i Height of the cylinder - Height of the cylinder + ცილინდრის სიმაღლე @@ -687,7 +636,7 @@ For stock from the base object's bounding box it means the extra material i Length of the box - Length of the box + ჩარჩოს სიგრძე @@ -697,12 +646,12 @@ For stock from the base object's bounding box it means the extra material i Width of the box - Width of the box + ჩარჩოს სიგანე Height of the box - Height of the box + ჩარჩოს სიმაღლე @@ -818,7 +767,7 @@ Reset deletes all current items from the list and fills the list with all circul List of locations to be processed - List of locations to be processed + დასამუშავებელი მდებარეობების სია @@ -833,12 +782,12 @@ Reset deletes all current items from the list and fills the list with all circul Opens a dialog to add arbitrary locations - Opens a dialog to add arbitrary locations + გახსნის დიალოგს სასურველი მდებარეობების დასამატებლად Edit selected location - Edit selected location + მონიშნული მდებარეობის ჩასწორება @@ -904,7 +853,7 @@ Reset deletes all current items from the list and fills the list with all circul Finish step down - Finish step down + ქვემო ნაბიჯის დასრულება @@ -939,7 +888,7 @@ Reset deletes all current items from the list and fills the list with all circul Clearance height - Clearance height + გაბარიტული სიმაღლე @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul გამაგრილებელი - + Type of adaptive operation ადაპტიური ოპერაციის ტიპი - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes მონიშნული მოხაზულობების შიგნით ან გარეთ ამოჭრა - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry შესვლის სპირალის ბიჯის კუთხე - + Angle of the helix entry cone სპირალის კონუსის შესვლის კუთხე @@ -1030,76 +979,95 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - Tool controller + ხელსაწყოს კონტროლერი - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance - Accuracy vs performance + სიზუსტე vs წარმადობა - + Force clearing inside-out - Force clearing inside-out - - - - Finishing profile - Finishing profile + შიგნიდან-გარეთ ძალით გასუფთავება + Finishing profile + დამასრულებელი პროფილი + + + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave - XY stock to leave - - - - Helix ramp angle - Helix ramp angle + XY დასატოვებელი ნედლეული - + Helix ramp angle + სპირალის რამპის კუთხე + + + + Use outline კიდის გამოყენება - + Operation type - Operation type + ოპერაციის ტიპი - + Keep tool down ratio - Keep tool down ratio + ხელსაწყოს დაბლა დაკავების დონე - + Helix cone angle - Helix cone angle - - - - Lift distance - Lift distance + სპირალის კონუსის კუთხე + Lift distance + აწევის მანძილი + + + Cut region რეგიონის ამოჭრა - + Helix max diameter - Helix max diameter + სპირალის მაქს. დიამეტრი - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region ამოჭრების შეკვეთა რეგიონების მიედვით - + Z stock to leave - Z stock to leave + Z დასატოვებელი ნედლეული - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop შეჩერება - - - - + + + + Direction მიმართულება - + CW სმ - + CCW სსს - + Round joint მომრგვალებული შეერთება - + Miter joint ირიბპირა შეერთება - - + + @@ -1172,73 +1140,73 @@ This option changes that behavior to cut each discrete area to its full depth be მმ - + Width of chamfer cut - Width of chamfer cut + კუთხის ნაზოლის ამოჭრის სიგანე - + Extra depth of tool immersion - Extra depth of tool immersion + ხელსაწყოს ჩაძირვის დამატებითი სიღრმე - + Join: შეერთება: - + TextLabel ტექსტური ჭდე Do not retract after every hole - Do not retract after every hole + ყოველი ხვრელის შემდეგ გამოწევა არ მოხდება Keep tool down - Keep tool down + ხელსაწყოს დაბლა დაკავება - + Peck G83 ციკლი - + Extend depth სიღრმის მომატება - + Drill tip ბურღის წვერი - + 2x drill tip 2x ბურღის წვერი - + Depth სიღრმე - + Retract რეტრაქტი - + Chip break ნაფხვენის მოცილება - + Dwell დაყოვნება @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be ფორმა - + Time დრო @@ -1257,7 +1225,7 @@ This option changes that behavior to cut each discrete area to its full depth be Tap tip - Tap tip + შიგსახრახნის ბუნიკი @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ხელსაწყოს კონტროლერი - + None არაფერი - + Feed retract ნაკადის გამოწევა - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from დასაწყისი - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside შიგნით - + Outside გარედან - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset დამატებითი წანაცვლება - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent მიწოდების ბიჯის პროცენტულობა @@ -1372,7 +1340,7 @@ This option changes that behavior to cut each discrete area to its full depth be Enable extensions - Enable extensions + გაფართოებების ჩართვა @@ -1382,12 +1350,12 @@ This option changes that behavior to cut each discrete area to its full depth be Extend corners - Extend corners + კუთხეების გაფართოება Default length - Default length + ნაგულისხმევი სიგრძე @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be გამორთვა - + Boundary Shape საზღვრის მონახაზი - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode ამოჭრის რეჟიმი - - + + Climb აღმართი - - + + Conventional მიღებული - + Pattern შაბლონი @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height გამაგრილებლის რეჟიმი - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction + ამოჭრის რეჟიმი გულისხმობს, რომ ამოჭრა ხელსაწყოს მჭრელი იარაღის ერთ მხარეს წარმოადგენს შედეგობრივ ნაწილს და მეორე მხარეს ან უკვე დაფრეზილია, ან მოგვიანებით წაიშლება. აღმართის რეჟიმია, როცა ხელსაწყოს მჭრელი იარაღი შედის ამოჭრაში თითოეული ბრუნვისას, როცა მღებულ რეჟიმში ხელსაწყოს 'მჭრელი იარაღის ბრუნვა' და ხელსაწყოს გვერდითი მოძრაობა იგივე მიმართულებით ხდება - + Pattern the tool bit is moved in to clear the material ნიმუში, როგორ მოძრაობს ხელსაწყოს მჭრელი იარაღი შიგნით მასალის გასასუფთავებლად - + ZigZag ზიგზაგი - + Spiral სპირალური - + ZigZagOffset ზიგზაგის წანაცვლება - + Line ხაზი - + Grid ბადე - + Triangle სამკუთხედი - + Angle კუთხე - + Angle in which the pattern is applied კუთხე, რომლითაც შაბლონი გადატარდება - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance - Material allowance + მასალის დასაშვებობა - + The amount of material that should be left by this operation in relation to the target shape მასალის რაოდენობა სამიზნე ფორმასთან მიმართებაში, რომელიც ოპერაციის მიერ უნდა იქნას დატოვებული - + Specify if this operation uses a starting point მიუთითეთ, ეს ოპერაცია იყენებს საწყის წერტილს, თუ არა - - + + Use start point - Use start point + საწყისი წერტილის გამოყენება - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges წიბოების გასუფთავება - + Min travel მინიმალური გზა - + Check to skip machining regions that have already been cleared by previous operations ჩართეთ იმ რეგიონების გამოსატოვებლად, რომლებიც წინა ოპერაციების მიერ უკვე გასუფთავდა - + Use rest machining - Use rest machining + ნარჩენის დამუშავების გამოყენება - + Use Start Point სასტარტო წერტილის გამოყენება - + Probe grid points - Probe grid points + ბადის წერტილების ზონდირება - + X: X: - + Y: Y: - + Probe სინჯი - + X offset X-წანაცვლება - + Y offset Y-წანაცვლება - + File name ფაილის სახელი - + Output გამოტანა - + Enter the filename where the probe points should be written შეიყვანეთ ზონდირების წერტილების ჩასაწერი ფაილის სახელი - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER ადგილის დამკავებელი - - + + The direction in which the profile is performed, clockwise or counterclockwise მიმართულება, რომლითაც პროფილი შესრულდება. საათის, თუ საათის საწინააღმდეგო მიმართულებით - + The amount of extra material left by this operation in relation to the target shape ამ ოპერაციის შედეგად დარჩენილი დამატებითი მასალის რაოდენობა სამიზნე ფორმასთან მიმართებაში - + Cut side გვერდის ჭრა - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes - Number of passes + გავლების რაოდენობა - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover - Pass stepover + გავლის გადაბიჯება - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point შეამოწმეთ, ამ ოპერაციამ უნდა გამოიყენოს საწყისი წერტილი, თუ არა - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes - Process holes + ნახვრეტების დამუშავება - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles - Process circles + წრეების დამუშავება - + Check if this profile operation should also process the outside perimeter of the base geometry shapes ჩართეთ, თუ ამ პროფილის ოპერაციებმა საბაზისო გეომეტრული ფიგურების გარე პერიმეტრიც უნდა დაამუშაონ - + Use Compensation კომპენსაციის გამოყენება - + Process Perimeter პერიმეტრის დამუშავება - - + + Vertex წვერო - + End Feature Reference თვისების ბმის დასრულება - + Choose what point to use on the first selected feature მონიშნეთ რომელი წერტილი იქნება გამოყენებული პირველ მონიშნულ თვისებაზე @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference - Start feature reference + თვისების მიბმის დასაწყისი - - + + Center of mass მასის ცენტრი - - + + Center of bounding box - Center of bounding box + შემომსაზღვრელი ჩარჩოს ცენტრი - - + + Lowest point ყველაზე დაბალი წერტილი - - + + Highest point - Highest point + უმაღლესი წერტილი - + Long edge გრძელი წიბო - + Short edge მოკლე წიბო - + Choose what point to use on the second selected feature აირჩიეთ, რომელი წერტილი გამოიყენოთ მეორე არჩეულ თვისებაზე - + No base geometry Selected - No base geometry Selected + საბაზისო გეომეტრია არჩეული არაა - + No base geometry selected - No base geometry selected + საბაზისო გეომეტრია არჩეული არაა - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start - Extend path start + ტრაექტორიის დასაწყისის გაგრძელება - - - + + + Layer mode ფენის რეჟიმი - + Path orientation - Path orientation + ტრაექტორიის ორიენტაცია - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end დასაწყისიდან დასასრულამდე - + Positive extends the beginning of the path, negative shortens დადებითი მნიშვნელობა დააგრძელებს ტრაექტორიის დასაწყისს, უარყოფითი კი დაამოკლებს - + Extend Path End ტრაექტორიის ბოლოს დაგრძელება - + Positive extends the end of the path, negative shortens დადებითი მნიშვნელობა დააგრძელებს ტრაექტორიის ბოლოს, უარყოფითი კი დაამოკლებს - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth ოპერაციის სიღრმეზე ერთი გავლის დასრულება. ან აირჩიეთ მრავალი გავლა, სრული სიღრმის მისაღწევად - + Single-pass ერთი-გავლით - + Multi-pass მრავალგავლადი - + Perpendicular მართობულად - + Enable to reverse the cut direction of the slot path ჩართეთ, რომ შემოაბრუნოთ სლოტის ტრაექტორიის ამოჭრის მიმართულება - + Reverse cut direction უკუღმა ჭრის მიმართულება - - + + Bounding box შემომსაზღვრელი ჩარჩო - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type სკანირების ტიპი - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern ნიმუშის ამოჭრა - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - - - Profile edges - Profile edges - - Profile the edges of the selection - Profile the edges of the selection + Profile edges + პროფილის წიბოები - Avoid last X faces - Avoid last X faces + Profile the edges of the selection + მონიშნულის წიბოების პროფილირება + Avoid last X faces + ბოლო X ზედაპირების თავიდან აცილება + + + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y შემომსაზღვრელი ჩარჩოს დამატებითი წანაცვლების X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction - Drop cutter direction + ამოჭრის მიმართულება - + Dropcutter lines are created parallel to this axis. ფრეზირების ხაზები ამ ღერძის პარალელურად შეიქმნება. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover გადაბიჯება - + Set to true if specifying a start point - Set to true if specifying a start point - - - - - Optimize linear paths - Optimize linear paths + დააყენეთ ჭეშმარიტზე, თუ უთითებთ საწყის წერტილს + + Optimize linear paths + წრფივი ტრაექტორიების ოპტიმიზაცია + + + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement - Boundary enforcement + ნაძალადევი შემოსაზღვრა - + Optimize stepover transitions - Optimize stepover transitions + გადაბიჯების გადასვლების ოპტიმიზაცია - - + + Set the sampling resolution. Smaller values quickly increase processing time. დააყენეთ სამპლინგის გაფართოება. მცირე მნიშვნელობები სწრაფად ზრდიან დამუშავების დროს. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. ტრაექტორიის თითოეული ბიჯის, მათ შორის გადასვლის და ჩატეხვების ცალცალკე გაუმჯობესება. - + Depth offset სიღრმის წანაცვლება - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment - Boundary adjustment + საზღვრის მორგება - + Step over გადაბიჯება - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval სინჯის ინტერვალი @@ -2172,114 +2140,119 @@ Default: 3 mm შვეული - + Thread ძაფი - + Orientation ორიენტაცია - + Type ტიპი - + Fit ჩატევა - + Major diameter ძირითადი დიამეტრი - + Minor diameter მცირე დიამეტრი - + Lead in/out შეყვანა/გამოყვანა - + Pitch ჩაწოდების ბიჯი - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation ოპერაცია - + Passes გავლები - + Discretization Deflection ანარეკლის დისკრეტიზაცია - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines - Filter colinear lines + თანახაზობრივი ხაზების გაფილტვრა - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset ბოლო გავლის Z წანაცვლება - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass ბოლო გავლა - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements გადაადგილებების ოპტიმიზაცია - + Algorithm ალგორითმი @@ -2336,7 +2309,7 @@ Default: 3 mm Length offset - Length offset + სიგრძის წანაცვლება @@ -2346,17 +2319,17 @@ Default: 3 mm Corner radius - Corner radius + მოხვევის რადიუსი Point/tip angle - Point/tip angle + წერტილის/ბუნიკის კუთხე Cutting edge height - Cutting edge height + მჭრელი წიბოს სიმაღლე @@ -2377,7 +2350,7 @@ Default: 3 mm Default width - Default width + ნაგულისხმევი სიგანე @@ -2391,7 +2364,7 @@ If the width is set to 0 the dressup will try to guess a reasonable value based Default height - Default height + ნაგულისხმევი სიმაღლე @@ -2405,7 +2378,7 @@ If the specified height is 0 the dressup will use half the height of the part. S Default angle - Default angle + ნაგულისხმევი კუთხე @@ -2415,12 +2388,12 @@ If the specified height is 0 the dressup will use half the height of the part. S Default radius - Default radius + ნაგულისხმევი რადიუსი Initial # tags - Initial # tags + ჭდეების საწყისი # @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul ჭდის გენერაცია - + G-Code G-code - + Start at vertex - Start at vertex + წვეროსთან დაწყება - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -2606,7 +2579,7 @@ See the file save policy below on how to deal with name conflicts. Default geometry tolerance - Default geometry tolerance + ნაგულისხმევი გეომეტრიის ცდომილება @@ -2616,12 +2589,12 @@ See the file save policy below on how to deal with name conflicts. Default curve accuracy - Default curve accuracy + ნაგულისხმევი რკალის სიზუსტე Post processor - Post processor + პოსტპროცესორი @@ -2631,27 +2604,27 @@ See the file save policy below on how to deal with name conflicts. File save policy - File save policy + ფაილის შენახვის პოლიტიკა Open file dialog - Open file dialog + ფაილის გახსნის დიალოგი Open file dialog on conflict - Open file dialog on conflict + კონფლიქტისას ფაილის გახსნის ფანჯრის ჩვენება Post processors selection - Post processors selection + პოსტპროცესორის არჩევანი Default post processor - Default post processor + ნაგულისხმევი პოსტპროცესორი @@ -2661,7 +2634,7 @@ See the file save policy below on how to deal with name conflicts. Default arguments - Default arguments + ნაგულისხმევი არგუმენტები @@ -2676,12 +2649,12 @@ See the file save policy below on how to deal with name conflicts. Create cylinder - Create cylinder + ცილინდრის შექმნა Extend model's bounding box - Extend model's bounding box + მოდელის შემომსაზღვრელი ჩარჩოს გაფართოება @@ -2813,7 +2786,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Path selection style - Path selection style + ტრაექტორიის მონიშვნის სტილი @@ -2823,17 +2796,17 @@ Should multiple tools or tool shapes with the same name exist in different direc Task panel layout - Task panel layout + ამოცანის პანელის განლაგება Multi-panel - Multi-panel + მრავალპანელიანი Multi-panel - reversed - Multi-panel - reversed + მულტი ზოლი - შებრუნებული @@ -2858,7 +2831,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Default Path Colors - Default Path Colors + ნაგულისხმევი ტრაექტორიის ფერები @@ -3009,7 +2982,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Axis mapping - Axis mapping + ღერძის ასახვა @@ -3210,7 +3183,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Width of the resulting holding tag - Width of the resulting holding tag + მიღებული სამაგრის სიგანე @@ -3224,7 +3197,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add დამატება @@ -3264,126 +3236,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From კოპირების წყარო - - - Surface - ზედაპირი - - - - Remove - წაშლა - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - განახლება - - - - All objects will be profiled using the same depth and speed settings - ყველა ობიექტი ერთი და იგივე სიღრმისა და სიჩქარის პარამეტრებით გამოყენებით იქნება პროფილირებული - - - - Depths - სიღრმეები - - - - Start depth - საწყისი სიღრმე - - - - Final depth - საბოლოო სიღრმე - - - - Step down - ნაბიჯით დაბლა - - - - Finish step down - Finish step down - - - - Safe height - უსაფრთხო სიმაღლე - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - გამაგრილებლის რეჟიმი - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - სიმაღლეები - - - - Operation - ოპერაცია - - - - The tool and its settings to be used for this operation. - ხელსაწყო და ამ ოპერაციაში გამოყენებული მისი პარამეტრები. - - - - Algorithm - ალგორითმი - Z Depth Correction @@ -3430,7 +3282,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Activate/resume simulation - Activate/resume simulation + სიმულაციის დაწყება/გაგრძელება @@ -3506,7 +3358,7 @@ Should multiple tools or tool shapes with the same name exist in different direc New CAMotics File - New CAMotics File + ახალი CAMotics-ის ფაილი @@ -3677,7 +3529,7 @@ FreeCAD has no knowledge of where a particular coordinate system exists within t Template export - Template export + შაბლონის გატანა @@ -3707,22 +3559,22 @@ FreeCAD has no knowledge of where a particular coordinate system exists within t Create cylinder - Create cylinder + ცილინდრის შექმნა Extend model's bounding box - Extend model's bounding box + მოდელის შემომსაზღვრელი ჩარჩოს გაფართოება Use existing solid - Use existing solid + არსებული მყარი სხეულის გამოყენება Assign stock material - Assign stock material + ნახევარფაბრიკატი მასალის მინიჭება @@ -3838,7 +3690,7 @@ FreeCAD has no knowledge of where a particular coordinate system exists within t Default values - Default values + ნაგულისხმევი მნიშვნელობები @@ -3922,7 +3774,7 @@ If <span style=" font-style:italic;">order by</span> is se Link stock and model - Link stock and model + მოდელისა და ნედლეულის მიბმა @@ -4015,12 +3867,12 @@ Default: 3 mm Horizontal feed - Horizontal feed + ჰოტიზონტალური მიწოდება Vertical feed - Vertical feed + ვერტიკალური მიწოდება @@ -4147,17 +3999,17 @@ Default: 3 mm ჩასწორება - + Drag Slider to Simulate გადაათრიეთ ჩოჩია სიმულაციისთვის - + Save Project As პროექტის შენახვა, როგორც - + CAMotics Project (*.camotics) CAMotics-ის პროექტი (*.camotics) @@ -4194,17 +4046,17 @@ Default: 3 mm შპინდელის ბრ/წთ - + Selected tool is not a drill მონიშნული ხელსაწყო ბურღი არაა - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° არასწორი მჭრელი წიბოს კუთხე %.2f. უნდა იყოს >0° და <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length მჭრელი წიბოს კუთხე (%.2f) უარყოფით ხელსაწყოს მჭრელი თავის სიგრძემდე მივყავართ @@ -4252,12 +4104,12 @@ Default: 3 mm isHorizontal(%s) მხარდაჭერილი არაა - + %s not supported for flipping %s-ს არ აქვს გადაბრუნების მხარდაჭერა - + Zero working area to process. Check your selection and settings. დასამუშავებელი სამუშაო ფართობი ნულის ტოლია. შეამოწმეთ თქვენი მონიშნული და პარამეტრები. @@ -4433,8 +4285,8 @@ Default: 3 mm - - + + The base toolpath to modify ჩასასწორებელი საბაზისო ხელსაწყოს მოძრაობის ტრაექტორია @@ -4455,90 +4307,90 @@ Default: 3 mm კუთხის მოქმედებისას აწევის სიმაღლე - + Calculate roll-on to toolpath ხელსაწყოს მოძრაობის ტრაექტორიამდე გადასვლის გამოთვლა - + Calculate roll-off from toolpath ხელსაწყოს მოძრაობის ტრაექტორიიდან გადახვევის გამოთვლა - + Keep the tool down in toolpath - Keep the tool down in toolpath + ხელსაწყოს მოძრაობის ტრაექტორიაში ხელსაწყოს დაბლა შეკავება - - + + Length or radius of the approach - Length or radius of the approach + მიდგომის რადიუსის სიგრძე - + Length or radius of the exit - Length or radius of the exit + გამოსვლის რადიუსის სიგრძე - - + + The style of motion into the toolpath - The style of motion into the toolpath + ხელსაწყოს მოძრაობის ტრაექტორიაში მოძრაობის სტილი - - + + The style of motion out of the toolpath - The style of motion out of the toolpath + ხელსაწყოს მოძრაობის ტრაექტორიის გარეთ მოძრაობის სტილი - + Extends lead in distance - Extends lead in distance + ადიდებს შეყვანის მანძილს - + Extends lead out distance - Extends lead out distance + ადიდებს გამოყვანის მანძილს - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 ჩაძირვის G0-ით შესრულება - + Angle of ramp - Angle of ramp + რამპის კუთხე - + Ramping Method რამპის მეთოდი - + Which feed rate to use for ramping რომელი მიწოდების სიჩქარე იქნება გამოყენებული დახრისთვის - + Custom feed rate მიწოდების სიჩქარის ხელით მითითება - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -4833,7 +4685,7 @@ Larger values (further to the right) will calculate faster; smaller values (furt Orders cuts by region instead of depth. - Orders cuts by region instead of depth. + ალაგებს ამოჭრებს რეგიონის მიხედვით სიღრმის მაგიერ. @@ -5217,12 +5069,12 @@ Use property KeepToolDown to change this Number of points to probe in X-direction - Number of points to probe in X-direction + X მიმართულებით ზონდირებადი წერტილების რაოდენობა Number of points to probe in Y-direction - Number of points to probe in Y-direction + Y მიმართულებით ზონდირებადი წერტილების რაოდენობა @@ -5699,7 +5551,7 @@ Use property KeepToolDown to change this The toolpaths to array - The toolpaths to array + ხელსაწყოს მოძრაობის ტრაექტორიებიდან მასივამდე @@ -5711,7 +5563,7 @@ Use property KeepToolDown to change this Total angle in polar pattern - Total angle in polar pattern + ჯამური კუთხე პოლარულ შაბლონში @@ -5723,7 +5575,7 @@ Use property KeepToolDown to change this The centre of rotation in polar pattern - The centre of rotation in polar pattern + პოლარულ შაბლონში ბრუნვის ცენტრი @@ -5736,7 +5588,7 @@ Use property KeepToolDown to change this Operations cycle time estimation - Operations cycle time estimation + ოპერაციის ციკლის დროს შეფასება @@ -5746,12 +5598,12 @@ Use property KeepToolDown to change this The unique ID of the tool shape (.fcstd) - The unique ID of the tool shape (.fcstd) + ხელსაწყოს მოხაზულობის უნიკალური ID (.fcstd) The tool shape type - The tool shape type + ხელსაწყოს მოხაზულობის ტიპი @@ -5761,17 +5613,17 @@ Use property KeepToolDown to change this The unique ID of the toolbit - The unique ID of the toolbit + ხელსაწყოს უნიკალური ID Tool material - Tool material + ხელსაწყოს მასალა Custom property from shape: {name} - Custom property from shape: {name} + მორგებული თვისება მოხაზულობიდან: {name} @@ -5842,17 +5694,17 @@ Use property KeepToolDown to change this Bones that are not dressed up - Bones that are not dressed up + კუთხის გარშემო შემოჭრები, რომლებსაც ზღუდარი არ აქვთ An optional comment for this operation - An optional comment for this operation + ამ ოპერაციის არასავალდებულო კომენტარი User assigned label - User assigned label + მომხმარებლის მიერ მინიჭებული ჭდე @@ -5862,7 +5714,7 @@ Use property KeepToolDown to change this Chipload per tooth - Chipload per tooth + ჩიპდატვირთვა თითოეული კბილისთვის @@ -6343,81 +6195,81 @@ Use property KeepToolDown to change this გამორთეთ ოპერაციისთვის კოდის გენერაციის ხელის შესაშლელად - + Edit ჩასწორება - + Base Geometry ბაზური გეომეტრია - + Multiple operations are labeled as ოპერაციების ჯგუფი მონიშნულია, როგორც - + Base Location ბაზური მდებარეობა - + Heights სიმაღლეები - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths სიღრმეები - + Diameters დიამეტრები - + AreaOp Operation ოპერაცია AreaOp - + Operation ოპერაცია - + Uncreate AreaOp Operation AreaOp ოპერაციის გაუქმება - + Start Point Selection - Start Point Selection + საწყისი წერტილის არჩევანი - + Selects the start point - Selects the start point + მონიშნავს საწყის წერტილს - + No suitable tool controller found. Aborting op creation ხელსაწყოს შესატყვისი კონტროლერი ნაპოვნი არაა. ოპის შექმნა გაუქმებულია - + No tool controller, aborting op creation ხელსაწყოს კონტროლერი ნაპოვნი არაა. ოპერაციის შექმნა შეჩერებულია @@ -6432,7 +6284,7 @@ Aborting op creation Base is empty or an invalid object. - Base is empty or an invalid object. + ბაზა ცარიელი, ან არასწორი ობიექტია. @@ -6442,7 +6294,7 @@ Aborting op creation Arrays not compatible with coolant modes. - Arrays not compatible with coolant modes. + მასივები გამაგრილებლის რეჟიმებთან თავსებადი არაა. @@ -6483,7 +6335,7 @@ Aborting op creation Please check lines: %s - Please check lines: %s + შეამოწმეთ ხაზები: %s @@ -6542,12 +6394,12 @@ Aborting op creation Enable lead-in move - Enable lead-in move + შეყვანის გადაადგილების ჩართვა Enable lead-in - Enable lead-in + შეყვანის ჩართვა @@ -6559,37 +6411,37 @@ Aborting op creation Length/radius - Length/radius + სიგრძე/რადიუსი Length or radius of the lead-in - Length or radius of the lead-in + შეყვანის სიგრძე ან რადიუსი Extends the lead-in distance - Extends the lead-in distance + ზრდის შეყვანის მანძილს Enable lead-out move - Enable lead-out move + გამოყვანის გადაადგილების ჩართვა Enable lead out - Enable lead out + გამოყვანის ჩართვა Length or radius of the lead-out - Length or radius of the lead-out + გამოყვანის რადიუსის სიგრძე Extends the lead-out distance - Extends the lead-out distance + ზრდის გამოყვანის მანძილს @@ -6599,17 +6451,17 @@ Aborting op creation Apply lead-in/out on all layers - Apply lead-in/out on all layers + შეყვანა/გამოყვანის გადატარება ყველა ფენაზე Include layers - Include layers + ფენების ჩათვლით Keep tool down - Keep tool down + ხელსაწყოს დაბლა დაკავება @@ -6628,51 +6480,51 @@ Aborting op creation ხელსაწყოს ტრაექტორიაში დაბლა შეკავება - - + + Arc რკალი - - + + Tangent მხები - - + + Perpendicular პერპენდიკულარული - - + + Length/radius positive not Null - Length/radius positive not Null + სიგრძე/რადიუსი ნულზე მეტი უნდა იყოს - + Lead In/Out შეყვანა/გამოყვანა - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი - + Select a Profile object - Select a Profile object + აირჩიეთ პროფილი ობიექტი - + The selected object is not a toolpath მონიშნული ობიექტი ხელსაწყოს მოძრაობის ტრაექტორია არაა @@ -6715,7 +6567,7 @@ Aborting op creation Select a profile object - Select a profile object + აირჩიეთ პროფილი ობიექტი @@ -6748,7 +6600,7 @@ Aborting op creation Remaps one axis to another - Remaps one axis to another + ერთი ღერძის მეორეზე მიბმა @@ -6758,7 +6610,7 @@ Aborting op creation Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -6772,7 +6624,7 @@ Aborting op creation Select a toolpath object - Select a toolpath object + აირჩიეთ ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -6793,7 +6645,7 @@ Aborting op creation Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -6807,7 +6659,7 @@ Aborting op creation Drag Knife - Drag Knife + გადასათრევი დანა @@ -6817,12 +6669,12 @@ Aborting op creation Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი Select a toolpath object - Select a toolpath object + აირჩიეთ ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -6841,67 +6693,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 დახრის მეთოდი 1 - + RampMethod2 დახრის მეთოდი 2 - + RampMethod3 დახრის მეთოდი 3 - + Helix სპირალები - + Horizontal Feed Rate ჰორიზონტალური მიწოდების სიჩქარე - + Vertical Feed Rate ვერტიკალური მიწოდების სიჩქარე - + Ramp Feed Rate რამპის მიწოდების სიჩქარე - + Custom მომხმარებლის - + Ramp Entry რამპის შესასვლელი - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი - + Select a Profile object - Select a Profile object + აირჩიეთ პროფილი ობიექტი - + The selected object is not a toolpath მონიშნული ობიექტი ხელსაწყოს მოძრაობის ტრაექტორია არაა @@ -6945,7 +6797,7 @@ Aborting op creation Corrects Z depth using a probe map - Corrects Z depth using a probe map + ასწორებს Z სირღმეს ზონდის რუკის გამოყენებით @@ -7065,12 +6917,12 @@ Aborting op creation Warning: Incompatible Unit Schema - Warning: Incompatible Unit Schema + გაფრთხილება: არათავსებადი ერთეულების სქემა Don't show this warning again - Don't show this warning again + მეტჯერ აღარ აჩვენო ეს გაფრთხილება @@ -7110,7 +6962,7 @@ Aborting op creation Creates a CAM job - Creates a CAM job + ქმნის CAM დავალებას @@ -7123,7 +6975,7 @@ Aborting op creation Creates a fixture offset - Creates a fixture offset + ქმნის ჩამჭერის წანაცვლებას @@ -7138,7 +6990,7 @@ Aborting op creation Inspect Toolpath - Inspect Toolpath + ხელსაწყოს მოძრაობის ტრაექტორიiის ნახვა @@ -7149,7 +7001,7 @@ Aborting op creation Select exactly one path object - Select exactly one path object + აირჩიეთ ზუსტად ერთი ტრაექტორიის ობიექტი @@ -7273,7 +7125,7 @@ Aborting op creation Tool Controller - Tool Controller + ხელსაწყოს კონტროლერი @@ -7490,7 +7342,7 @@ Aborting op creation Checks the CAM job for common errors - Checks the CAM job for common errors + შეამოწმებს CAM დავალებას გავრცელებულ შეცდომებზე @@ -7518,13 +7370,13 @@ Aborting op creation Legacy CAM Simulator - Legacy CAM Simulator + მოძველებული CAM სიმულატორი Simulates G-code on stock - Simulates G-code on stock + G-Code-ის სიმულაცია ნედლეულზე @@ -7577,6 +7429,21 @@ Aborting op creation Mist ბურუსი + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -7712,7 +7579,7 @@ Aborting op creation Refactored Masso G3 post processor - Refactored Masso G3 post processor + გადამუშავებული პოსტპროცესორი Masso G3 @@ -7722,22 +7589,22 @@ Aborting op creation SVG post processor - SVG post processor + SVG-ის პოსტპროცესორი Camotics Tool Library - Camotics Tool Library + ხელსაწყოს ბიბლიოთეკა Camotics FreeCAD Tool Library - FreeCAD Tool Library + FreeCAD-ის ხელსაწყოების ბიბლიოთეკა LinuxCNC Tool Table - LinuxCNC Tool Table + LinuxCNC ხელსაწყოს ტიპი @@ -7762,7 +7629,7 @@ Aborting op creation Unknown custom toolbit type - Unknown custom toolbit type + უცნობი მომხმარებლის ხელსაწყოს ტიპი @@ -7817,7 +7684,7 @@ Aborting op creation Camotics Tool - Camotics Tool + ხელსაწყო Camotics @@ -7842,7 +7709,7 @@ Aborting op creation Select Tool Bit - Select Tool Bit + აირჩიეთ ხელსაწყოს მჭრელი იარაღი @@ -8461,7 +8328,7 @@ Aborting op creation Creates an array from selected toolpaths - Creates an array from selected toolpaths + მონიშნული ხელსაწყოს მოძრაობის ტრაექტორიებისგან მასივის შექმნა @@ -8479,7 +8346,7 @@ Aborting op creation Adds a Comment to the CNC program - Adds a Comment to the CNC program + ამატებს კომენტარს CNC პროგრამას @@ -8589,7 +8456,7 @@ Aborting op creation Select exactly one toolpath object - Select exactly one toolpath object + მონიშნეთ ზუსტად ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -8610,7 +8477,7 @@ Aborting op creation Waterline - ვათერხაზი + წყალხაზი @@ -8628,7 +8495,7 @@ Aborting op creation Post Processes the selected job - Post Processes the selected job + მონიშნული დავალების პოსტპროცესი @@ -8649,7 +8516,7 @@ Aborting op creation Forward - წინ + Forward @@ -8664,12 +8531,12 @@ Aborting op creation Tool Controller - Tool Controller + ხელსაწყოს კონტროლერი Adds a new tool controller to the active job - Adds a new tool controller to the active job + დაამატებს ახალ ხელსაწყოს კონტროლერს აქტიურ დავალებას @@ -8682,7 +8549,7 @@ Aborting op creation Saves an existing toolbit object to a file - Saves an existing toolbit object to a file + შეინახავს არსებულ ხელსაწყოს ობიექტს ფაილში @@ -8695,7 +8562,7 @@ Aborting op creation Loads an existing toolbit object from a file - Loads an existing toolbit object from a file + არსებული ხელსაწყოს ობიექტის ფაილიდან ჩატვირთვა @@ -8705,44 +8572,44 @@ Aborting op creation No Library Loaded - No Library Loaded + ჩატვირთული ბიბლიოთეკის გარეშე Load or create a tool library first. - Load or create a tool library first. + ჯერ ჩატვირთეთ ან შექმენით ხელსაწყოს ბიბლიოთეკა. Error Creating Toolbit - Error Creating Toolbit + ხელსაწყოს შექმნის შეცდომა Error Adding Imported Toolbit - Error Adding Imported Toolbit + შემოტანილი ხელსაწყოს დამატების შეცდომა Error Editing Toolbit - Error Editing Toolbit + ხელსაწყოს ჩასწორების შეცდომა New Tool Library - New Tool Library + ახალი ხელსაწყოების ბიბლიოთეკა Enter a name for the new library: - Enter a name for the new library: + შეიყვანეთ სახელი ახალი ბიბლიოთეკისთვის: Error Saving Library - Error Saving Library + ბიბლიოთეკის შენახვის შეცდომა @@ -8755,29 +8622,29 @@ Aborting op creation ფიგურა - + Tool Selector - Tool Selector + ხელსაწყოს არჩევა - + Open Library Editor - Open Library Editor + ბიბლიოთეკის რედაქტორის გახსნა - + Add to Job დავალებაში ჩამატება - + No Job Found დავალებები აღმოჩენილი არაა - + Please create a Job first. - Please create a Job first. + ჯერ შექმენით დავალება. @@ -8796,14 +8663,14 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics - Simulates using CAMotics + სიმულაცია CAMotics-ით @@ -8896,12 +8763,12 @@ Aborting op creation Creates an array from a selected toolpath - Creates an array from a selected toolpath + შექმნის მასივს მონიშნული ხელსაწყოს მოძრაობის ტრაექტორიიდან Select one toolpath object - Select one toolpath object + აირჩიეთ ერთი ხელსაწყოს მოძრაობის ტრაექტორიის ობიექტი @@ -8939,17 +8806,17 @@ Aborting op creation Toggle turn table animation - Toggle turn table animation + მბრუნავი ცხრილის ანიმაციის გადართვა Toggle ambient occlusion - Toggle ambient occlusion + გარემოს შთანთქმის გადართვა Toggle view simulation/model - Toggle view simulation/model + ხედის სიმულაციის/მოდელის გადართვა @@ -8970,12 +8837,12 @@ Aborting op creation Toggle Operation - Toggle Operation + ოპერაციის გადართვა Toggles the active state of the operation - Toggles the active state of the operation + გადართავს ოპერაციის აქტიურ მდგომარეობას @@ -8983,12 +8850,12 @@ Aborting op creation Copy Operation - Copy Operation + ოპერაციის კოპირება Copies the operation in the job - Copies the operation in the job + აკოპირებს ოპერაციას დავალებაში @@ -9012,12 +8879,12 @@ Aborting op creation Tool Shape Selection - Tool Shape Selection + ხელსაწყოს მოხაზულობის არჩევანი Standard tools - Standard tools + სტანდარტული ხელსაწყოები @@ -9043,7 +8910,7 @@ Aborting op creation Path From Shape TC - Path From Shape TC + ტრაექტორია მოხაზულობის TC-დან @@ -9062,7 +8929,7 @@ Aborting op creation Asset Directory: - Asset Directory: + აქტივის საქაღალდე: @@ -9077,7 +8944,7 @@ Aborting op creation Select Asset Directory - Select Asset Directory + აირჩიეთ აქტივების საქაღალდე @@ -9087,33 +8954,20 @@ Aborting op creation The selected asset path is not writable. - The selected asset path is not writable. - - - - CAM_ToolBitDock - - - Toolbit Dock - ხელსაწყოების ზოლი - - - - Toggles the toolbit dock - Toggles the toolbit dock + მონიშნული აქტივი ტრაექტორია ჩაწერადი არაა. CAM_ToolBitLibraryOpen - + Toolbit Library Editor - Toolbit Library Editor + ხელსაწყოს მჭრელი იარაღის ბიბლიოთეკის რედაქტორი - + Opens an editor to manage toolbit libraries - Opens an editor to manage toolbit libraries + ხსნის რედაქტორს ხელსაწყოა ბიბლიოთეკების სამართავად @@ -9126,7 +8980,7 @@ Aborting op creation Cutting edge height - Cutting edge height + მჭრელი წიბოს სიმაღლე @@ -9169,7 +9023,7 @@ Aborting op creation Overall tool length - Overall tool length + ხელსაწყოს სრული სიგრძე @@ -9183,12 +9037,12 @@ Aborting op creation Shank diameter - Shank diameter + ბოლოვანას დიამეტრი Ballend - Ballend + მრგვალი ბოლო @@ -9204,13 +9058,13 @@ Aborting op creation Cutting edge angle - Cutting edge angle + მჭრელი წიბოს კუთხე Tip diameter - Tip diameter + ბუნიკის დიამეტრი @@ -9220,24 +9074,24 @@ Aborting op creation Unknown custom shape - Unknown custom shape + უცნობი მორგებული მოხაზულობა Crest height - Crest height + წვეროს სიმაღლე Cutting angle - Cutting angle + ამოჭრის კუთხე Dovetail height - Dovetail height + მაკრატელასებრი კოტის სიმაღლე @@ -9249,7 +9103,7 @@ Aborting op creation Neck diameter - Neck diameter + ყელის დიამეტრი @@ -9266,12 +9120,12 @@ Aborting op creation Tip angle - Tip angle + ბუნიკის კუთხე Endmill - Endmill + ტორსული ფრეზა @@ -9286,22 +9140,22 @@ Aborting op creation Filleted Chamfer - Filleted Chamfer + მომრგვალებული კუთხის ნაზოლი Ball diameter - Ball diameter + ბურთის დიამეტრი Length of probe - Length of probe + ზონდის სიგრძე Shaft diameter - Shaft diameter + ლილვის დიამეტრი @@ -9316,7 +9170,7 @@ Aborting op creation Blade thickness - Blade thickness + დანის პირის სისქე @@ -9326,32 +9180,32 @@ Aborting op creation Cap height - Cap height + თავსახურის სიმაღლე Slitting Saw - Slitting Saw + მჭრელი ხერხი Cutting edge length - Cutting edge length + მჭრელი წიბოს სიგრძე Tap diameter - Tap diameter + შიგსახრახნის დიამეტრი Overall length of tap - Overall length of tap + შიგსახრახნის საერთო სიგრძე Tap - შეხება + შიგსახრახნი @@ -9369,7 +9223,7 @@ Aborting op creation Shank diameter - Shank diameter + ბოლოვანას დიამეტრი @@ -9382,7 +9236,7 @@ Aborting op creation Creates a new toolbit object - Creates a new toolbit object + ხელსაწყოს ახალი მჭრელი იარაღის ობიექტის შექმნა @@ -9390,7 +9244,7 @@ Aborting op creation Save Tool As… - Save Tool As… + ხელსაწყოს შენახვა როგორც… @@ -9401,4 +9255,60 @@ Aborting op creation ამოჭრა + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + შპინდელი + + + + Forward + Forward + + + + Reverse + რევერსი + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ko.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ko.ts index b34d2f4572..675b76e0a5 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ko.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ko.ts @@ -308,61 +308,10 @@ For stock from the base object's bounding box it means the extra material i 공구제어편집 - - Controller - Controller - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - 회전속도 - - - - Forward - Forward - - - - Reverse - 반대로 - - - Tool 도구 - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -956,7 +905,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -970,12 +919,12 @@ Reset deletes all current items from the list and fills the list with all circul 절삭유 - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -984,37 +933,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1032,73 +981,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1107,57 +1075,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop 중지 - - - - + + + + Direction 방향 - + CW 시계방향 - + CCW CCW - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1171,22 +1139,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel 텍스트 라벨 @@ -1201,43 +1169,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth 깊이 - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1248,7 +1216,7 @@ This option changes that behavior to cut each discrete area to its full depth be 양식 - + Time Time @@ -1275,61 +1243,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None 없음 - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inside - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1399,12 +1367,12 @@ This option changes that behavior to cut each discrete area to its full depth be 비활성화 - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1413,24 +1381,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern Pattern @@ -1472,266 +1440,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral 나선형 - + ZigZagOffset 지그재그 편차 - + Line 선 - + Grid 격자 - + Triangle 삼각형 - + Angle 각 - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output 출력 - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1741,299 +1709,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass 무게중심 - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End 끝경로 늘리기 - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass 단일-경로 - + Multi-pass 다중-경로 - + Perpendicular 직교 - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset 깊이 편차 - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over 한 단계 진행 - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2042,8 +2010,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2171,114 +2139,119 @@ Default: 3 mm 세로 - + Thread Thread - + Orientation 방향 - + Type 유형 - + Fit Fit - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass 정삭경로 - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm 연산법 @@ -2441,17 +2414,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-코드 - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3224,7 +3197,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add 추가하기 @@ -3264,126 +3236,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - 표면 - - - - Remove - 제거 - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - 업데이트 - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - 깊이 - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - - - - - Operation - 작업 - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - 연산법 - Z Depth Correction @@ -4148,17 +4000,17 @@ Default: 3 mm 편집 - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4195,17 +4047,17 @@ Default: 3 mm 회전속도 RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4253,12 +4105,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4434,8 +4286,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4456,90 +4308,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6344,81 +6196,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit 편집 - + Base Geometry 기본 도형 - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths 깊이 - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6629,51 +6481,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc 호 - - + + Tangent 접선 - - + + Perpendicular 직교 - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6843,67 +6695,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix 나선 - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom 사용자 정의 - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7579,6 +7431,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8757,27 +8624,27 @@ Aborting op creation 셰이프 - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8798,12 +8665,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9092,28 +8959,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9403,4 +9257,60 @@ Aborting op creation 오목 자리 + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + 반대로 + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_nl.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_nl.ts index c842f992f2..57f16277de 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_nl.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_nl.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Regelaar - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spoel - - - - Forward - Forward - - - - Reverse - Omdraaien - - - Tool Gereedschap - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Koelvloeistof - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Stop - - - - + + + + Direction Richting - + CW Rechtsom - + CCW Linksom - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel Tekstbenaming @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Diepte - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Vorm - + Time Tijd @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Geen - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start vanaf - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Binnen - + Outside Buiten - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Uitschakelen - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Klimmen - - + + Conventional Conventioneel - + Pattern Patroon @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Spiraal - + ZigZagOffset ZigZagOffset - + Line Lijn - + Grid Raster - + Triangle Driehoek - + Angle Hoek - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Gebruik startpunt - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonde - + X offset X offset - + Y offset Y offset - + File name File name - + Output Uitvoer - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Zwaartepunt massa - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Meerdere-passages - + Perpendicular Loodrecht - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Stap over - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Verticaal - + Thread Thread - + Orientation Oriëntatie - + Type Type - + Fit pas - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Toonhoogte - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Bewerking - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algoritme @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag genereren - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Toevoegen @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopiëren van - - - Surface - Oppervlak - - - - Remove - Verwijderen - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Update - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Diepten - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Hoogtes - - - - Operation - Bewerking - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algoritme - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Bewerken - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Project Opslaan Als - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Bewerken - + Base Geometry Basisgeometrie - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Basislocatie - + Heights Hoogtes - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Diepten - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Bewerking - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Boog - - + + Tangent Raaklijn - - + + Perpendicular Loodrecht - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Schroef - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Eigen - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation Vorm - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Uitsparing + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spoel + + + + Forward + Forward + + + + Reverse + Omdraaien + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_pl.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_pl.ts index 6d65841a8e..c7ec0476e3 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_pl.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_pl.ts @@ -211,7 +211,7 @@ Tool rapid speeds - Tool rapid speeds + Prędkość szybkiego posuwu narzędzia @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Edytor kontrolera narzędzi - - Controller - Kontroler - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Wrzeciono - - - - Forward - Do przodu - - - - Reverse - Do tyłu - - - Tool Narzędzie - - - Any modifications only affect this ToolController! - Wszelkie modyfikacje dotyczą tylko tego kontrolera narzędzi! - Tool Editor @@ -958,7 +907,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -972,12 +921,12 @@ Reset deletes all current items from the list and fills the list with all circul Chłodziwo - + Type of adaptive operation Rodzaj operacji adaptacyjnej - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -987,37 +936,37 @@ Większe wartości (bardziej w prawo) skutkują szybszymi obliczeniami; mniejsze wartości (bardziej w lewo) dają dokładniejsze ścieżki narzędzia. - + Cut inside or outside of the selected shapes Wytnij wewnątrz lub na zewnątrz zaznaczonych kształtów - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Jeśli wartość jest większa od zera, ogranicza średnicę helisy zejścia po rampie, w przeciwnym razie używane jest 75% średnicy narzędzia - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Jak wysoko należy unieść narzędzie podczas szybkich ruchów łączących nad oczyszczonymi obszarami. Jeśli ścieżka łączenia nie jest dostępna, narzędzie jest podnoszone do odstępu bezpieczeństwa. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Maksymalna długość ścieżki łączącej "trzymaj narzędzie w dół" w porównaniu do bezpośredniej odległości między punktami. Jeśli zostanie przekroczona, połączenie zostanie wykonane przez podniesienie narzędzia do odstępu bezpieczeństwa. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Wielkość, o jaką narzędzie jest przesuwane na boki w każdym cyklu wzorca, określona w procentach średnicy narzędzia. Szerokość skrawania 100% powoduje, że dwa różne cykle nie nakładają się na siebie. - + Angle of the helix ramp entry Kąt helisy zejścia po rampie - + Angle of the helix entry cone Kąt stożka wejścia helisy @@ -1035,73 +984,92 @@ mniejsze wartości (bardziej w lewo) dają dokładniejsze ścieżki narzędzia.< Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) Ilość materiału do pozostawienia w płaszczyźnie XY (np. na operację wykańczającą) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1110,57 +1078,57 @@ This option changes that behavior to cut each discrete area to its full depth be Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do pełnej głębokości, zanim przejdzie się do następnego. - + Order cuts by region Porządkuj obróbkę według regionu - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Ilość materiału do pozostawienia w płaszczyźnie Z (np. na operację wykańczającą) - + Stop Zatrzymaj - - - - + + + + Direction Kierunek - + CW Zgodnie ze wskazówkami zegara - + CCW Przeciwnie do ruchu wskazówek zegara - + Round joint Połączenie okrągłe - + Miter joint Połączenie ukośne - - + + @@ -1174,22 +1142,22 @@ Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Dołącz: - + TextLabel Etykieta @@ -1204,43 +1172,43 @@ Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do Keep tool down - + Peck Zagłębienie - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Głębokość - + Retract Wycofaj - + Chip break Chip break - + Dwell Postój @@ -1251,7 +1219,7 @@ Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do Formularz - + Time Czas @@ -1278,61 +1246,61 @@ Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do Kontroler narzędzi - + None Brak - + Feed retract Szybkość posuwu wycofania - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Wycofanie z otworu z podaną prędkością posuwu zamiast posuwu szybkiego - + Start from Rozpocznij od - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Wewnątrz - + Outside Na zewnątrz - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Określa procent średnicy narzędzia, o jaki każda spirala będzie przesunięta względem poprzedniej. Szerokość skrawania 100% oznacza brak nakładania się poszczególnych operacji frezowania. - - - + + + Step over percent Procent szerokości skrawania @@ -1402,12 +1370,12 @@ Ta opcja zmienia to zachowanie, tak że każde oddzielne pole jest obrabiane do Wyłącz - + Boundary Shape Kształt granicy - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1416,24 +1384,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Sposób obróbki - - + + Climb Współbieżnie - - + + Conventional Przeciwbieżnie - + Pattern Wzór @@ -1475,267 +1443,267 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Tryb obróbki zakłada, że skrawanie po jednej stronie końcówki narzędzia reprezentuje powstałą część, a druga strona jest już obrobiona lub zostanie wykończona później. Tryb podejścia oznacza, że końcówka narzędzia jest przesuwana podczas obróbki przy każdym obrocie, podczas gdy w trybie konwencjonalnym obrót końcówki narzędzia i ruch boczny narzędzia następują w tym samym kierunku. - + Pattern the tool bit is moved in to clear the material Wzór, który wykonuje narzędzie, aby usunąć materiał - + ZigZag Zygzak - + Spiral Spiralnie - + ZigZagOffset Odsunięcie zygzaka - + Line Liniowo - + Grid Siatka - + Triangle Trójkąt - + Angle Kąt - + Angle in which the pattern is applied Kąt, pod którym stosowany jest wzór - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Wartość, o jaką narzędzie jest przesuwane na boki w każdym cyklu wzoru, określona w procentach średnicy narzędzia. Szerokość skrawania 100% powoduje, że dwa różne cykle nie nakładają się na siebie - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Ilość materiału, która powinna pozostać po tej operacji w stosunku do kształtu docelowego - + Specify if this operation uses a starting point Określa, czy ta operacja używa punktu początkowego - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands W przypadku wybrania tej opcji operacja wykorzystuje kontur wybranej geometrii bazowej i ignoruje wszystkie otwory i wyspy - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Sprawdź, czy pominąć obszary obróbki, które zostały już oczyszczone przez poprzednie operacje - + Use rest machining Use rest machining - + Use Start Point Użyj punktu początkowego - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Wyjście - + Enter the filename where the probe points should be written Wprowadź nazwę pliku, w którym powinny być zapisywane sprawdzane punkty - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER MIEJSCE - - + + The direction in which the profile is performed, clockwise or counterclockwise Kierunek, w którym profil jest wykonywany, zgodnie lub przeciwnie do ruchu wskazówek zegara - + The amount of extra material left by this operation in relation to the target shape Ilość materiału dodatkowego pozostałego po tej operacji w stosunku do kształtu docelowego - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass W przypadku wielokrotnego przejścia dodatkowe przesunięcie każdego dodatkowego przejazdu - + Check if this operation should use a starting point Sprawdź, czy ta operacja powinna używać punktu początkowego - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Wybierz, czy ta operacja profilowania powinna również przetwarzać otwory w geometrii bazowej. Znalezione otwory są automatycznie przesuwane na przeciwległą stronę skrawania i wykonywane w przeciwnym kierunku niż ich obwody. Należy pamiętać, że nie obejmuje to otworów cylindrycznych, ponieważ zakłada się, że zostaną one wywiercone - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Sprawdź, czy ta operacja profilu powinna również przetwarzać zewnętrzny obwód kształtów geometrii bazowej - + Use Compensation Użyj kompensacji - + Process Perimeter Przetwórz obwód - - + + Vertex Wierzchołek - + End Feature Reference Zakończ odniesienie cechy - + Choose what point to use on the first selected feature Wybierz punkt, który ma być użyty na pierwszej z zaznaczonych cech @@ -1745,299 +1713,299 @@ Tryb podejścia oznacza, że końcówka narzędzia jest przesuwana podczas obró The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Środek ciężkości - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Wybierz punkt, który ma być użyty na drugiej z zaznaczonych cech - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Wartość dodatnia wydłuża początek ścieżki, ujemna skraca - + Extend Path End Końcowy zakres ścieżki - + Positive extends the end of the path, negative shortens Wartość dodatnia wydłuża koniec ścieżki, ujemna skraca - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Wykonaj operację w jednym przejściu na określoną głębokość lub w kilku przejściach do głębokości końcowej - + Single-pass Pojedyncze przejście - + Multi-pass Wielokrotne przejście - + Perpendicular Prostopadle - + Enable to reverse the cut direction of the slot path Włącz, aby odwrócić kierunek skrawania ścieżki rowka - + Reverse cut direction Odwróć kierunek skrawania - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Dodatkowe odsunięcie X, Y obiektu Ramki otaczającej - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Linie frezowania wgłębnego tworzone są równoległe do tej osi. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Ustaw rozdzielczość próbkowania. Im mniejsza wartość, tym dłuższy czas przetwarzania. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Włącz optymalizację ścieżek liniowych (punktów współliniowych). Usuwa niepotrzebne punkty współliniowe z wygenerowanego G-Code. - + Enable separate optimization of transitions between, and breaks within, each step over path. Włącz optymalizację przejść i przerw pomiędzy każdym krokiem w ścieżce. - + Depth offset Głębokość przesunięcia - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Szerokość skrawania - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2046,8 +2014,8 @@ A step over of 100% results in no overlap between two different cycles. Szerokość skrawania 100% powoduje, że dwa różne cykle nie nakładają się na siebie. - - + + Sample interval Odstęp między próbkami @@ -2175,118 +2143,123 @@ Domyślnie: 3 mm Pionowo - + Thread Gwint - + Orientation Orientacja - + Type Typ - + Fit Dopasuj - + Major diameter Średnica zewnętrzna - + Minor diameter Średnica wewnętrzna - + Lead in/out Lead in/out - + Pitch Odstęp - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operacja - + Passes Przejścia - + Discretization Deflection Odchylenie spowodowane ugięciem - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Wartość ta jest używana przy dzieleniu łuków na segmenty. Mniejsze wartości będą skutkowały zwiększeniem pliku G-code. Większe wartości mogą powodować niechciane segmenty na ścieżce linii środkowej. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Odsunięcie Z przejścia wykańczającego - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Przesunięcie frezowania końcowego dla przejścia końcowego. Użyj małej wartości, takiej jak -0,2 mm, aby wyczyścić "rozmytą powierzchnię" lub inne niedoskonałości. - + After carving, travel again the path to remove artifacts and imperfections Po wycięciu ponownie przejdź ścieżkę, aby usunąć wszelkie defekty i niedoskonałości. - + Finishing pass Przejście wykańczające - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optymalizacja ruchów - + Algorithm Algorytm @@ -2450,17 +2423,17 @@ wynikowy kształt będzie kopułą. Generowanie pól mocujących - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3238,7 +3211,6 @@ Lista ta jest określana na podstawie narożników w profilu i wybranej<span - Add Dodaj @@ -3282,126 +3254,6 @@ Znaczniki są automatycznie wyłączane, jeśli nakładają się na poprzedni zn Copy From Kopiuj z - - - Surface - Powierzchnia - - - - Remove - Usuń - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Aktualizuj - - - - All objects will be profiled using the same depth and speed settings - Wszystkie obiekty będą profilowane przy użyciu tych samych ustawień głębokości i prędkości - - - - Depths - Głębokość - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Wysokości - - - - Operation - Operacja - - - - The tool and its settings to be used for this operation. - Narzędzie i jego ustawienia, które będą używane do tej operacji. - - - - Algorithm - Algorytm - Z Depth Correction @@ -4158,17 +4010,17 @@ Domyślnie: 3 mm Edytuj - + Drag Slider to Simulate Przeciągnij suwak aby symulować - + Save Project As Zapisz projekt jako - + CAMotics Project (*.camotics) Projekt CAMotics (*.camotics) @@ -4205,17 +4057,17 @@ Domyślnie: 3 mm RPM wrzeciona - + Selected tool is not a drill Wybrane narzędzie nie jest wiertłem - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Nieprawidłowy kąt krawędzi cięcia %.2f musi być >0° i <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Kąt krawędzi skrawającej (%.2f) daje ujemną długość końcówki narzędzia @@ -4263,12 +4115,12 @@ Domyślnie: 3 mm isHorizontal(%s) nie obsługiwana - + %s not supported for flipping %s jest nieobsługiwane przy odwracaniu - + Zero working area to process. Check your selection and settings. Brak obszaru do obróbki. Sprawdź wybór i ustawienia. @@ -4444,8 +4296,8 @@ Domyślnie: 3 mm - - + + The base toolpath to modify Bazowa ścieżka narzędzia do modyfikacji @@ -4466,90 +4318,90 @@ Domyślnie: 3 mm Wysokość do podniesienia podczas akcji narożnika - + Calculate roll-on to toolpath Oblicza najazd na ścieżkę - + Calculate roll-off from toolpath Obliczanie odchyleń od ścieżki - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Wykonuj zagłębienia za pomocą G0 - + Angle of ramp Angle of ramp - + Ramping Method Metoda zejścia po rampie - + Which feed rate to use for ramping Prędkość posuwu szybkiego, z jaką odbędzie się zejście po rampie - + Custom feed rate Niestandardowa szybkość posuwu - + Should the dressup ignore motion commands above DressupStartDepth Czy operacja wykańczająca powinna ignorować polecenia ruchu powyżej głębokości rozpoczęcia wykańczania - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Głębokość, na której włączona jest obróbka wykańczająca dla zejścia po rampie. Powyżej niej zejścia po rampie nie jest generowane, ale polecenia ruchu są przekazywane bez zmian. @@ -4672,32 +4524,32 @@ Domyślnie: 3 mm Extra allowance from part bound box in negative X-direction - Extra allowance from part bound box in negative X-direction + Dodatkowy naddatek od obrysu części w kierunku ujemnym osi X. Extra allowance from part bound box in positive X-direction - Extra allowance from part bound box in positive X-direction + Dodatkowy naddatek od obrysu części w kierunku dodatnim osi X. Extra allowance from part bound box in negative Y-direction - Extra allowance from part bound box in negative Y-direction + Dodatkowy naddatek od obrysu części w kierunku ujemnym osi Y. Extra allowance from part bound box in positive Y-direction - Extra allowance from part bound box in positive Y-direction + Dodatkowy naddatek od obrysu części w kierunku dodatnim osi Y. Extra allowance from part bound box in negative Z-direction - Extra allowance from part bound box in negative Z-direction + Dodatkowy naddatek od obrysu części w kierunku ujemnym osi Z. Extra allowance from part bound box in positive Z-direction - Extra allowance from part bound box in positive Z-direction + Dodatkowy naddatek od obrysu części w kierunku dodatnim osi Z. @@ -5230,12 +5082,12 @@ lub przeciwnie do ruchu wskazówek zegara (konwencjonalnie) Number of points to probe in X-direction - Number of points to probe in X-direction + Liczba punktów zbieranych sondą w kierunku X Number of points to probe in Y-direction - Number of points to probe in Y-direction + Liczba punktów zbieranych sondą w kierunku Y @@ -5683,18 +5535,18 @@ OL Dropcutter* lub Eksperymentalny (nieoparty na OCL). The number of copies in X-direction in linear pattern - The number of copies in X-direction in linear pattern + Liczba kopii w kierunku X wzoru liniowego The number of copies in Y-direction in linear pattern - The number of copies in Y-direction in linear pattern + Liczba kopii w kierunku Y wzoru liniowego Make copies in X-direction before Y in linear 2D pattern - Make copies in X-direction before Y in linear 2D pattern + Wykonaj kopie w kierunku X przed Y w liniowym wzorze 2D @@ -6364,80 +6216,80 @@ Użyj wbudowanego systemu materiałów, aby przypisać właściwość MateriałK Zaznacz "Fałsz”, jeśli chcesz uniemożliwić operacji generowanie jakiegokolwiek kodu - + Edit Edycja - + Base Geometry Geometria podstawowa - + Multiple operations are labeled as Operacje wielokrotne są nazywane jako - + Base Location Położenie punktu bazowego - + Heights Wysokości - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Dla tej operacji nie można zmodyfikować głębokości końcowej. Jeśli konieczne jest ręczne ustawienie głębokości końcowej, wybierz inną operację. - + Depths Głębokość - + Diameters Średnice - + AreaOp Operation Operacja AreaOp - + Operation Operacja - + Uncreate AreaOp Operation Nieistniejąca operacja AreaOp - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Nie znaleziono odpowiedniego kontrolera narzędzia. Przerwanie procesu tworzenia - + No tool controller, aborting op creation Nie znaleziono kontrolera narzędzia. Przerwanie procesu tworzenia @@ -6649,51 +6501,51 @@ Przerwanie procesu tworzenia Trzymaj narzędzie na ścieżce w dole - - + + Arc Łuk - - + + Tangent Stycznie - - + + Perpendicular Prostopadle - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Wprowadzenie do / z - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Wybrany obiekt nie jest ścieżką narzędzia @@ -6794,7 +6646,7 @@ Przerwanie procesu tworzenia Select a toolpath object - Select a toolpath object + Wybierz obiekt ścieżki narzędzia @@ -6829,7 +6681,7 @@ Przerwanie procesu tworzenia Drag Knife - Drag Knife + Nóż wleczony @@ -6839,12 +6691,12 @@ Przerwanie procesu tworzenia Select one toolpath object - Select one toolpath object + Wybierz jeden obiekt ścieżki narzędzia Select a toolpath object - Select a toolpath object + Wybierz obiekt ścieżki narzędzia @@ -6863,67 +6715,67 @@ Przerwanie procesu tworzenia CAM_DressupRampEntry - + RampMethod1 Metoda zejścia po rampie 1 - + RampMethod2 Metoda zejścia po rampie 2 - + RampMethod3 Metoda zejścia po rampie 3 - + Helix Helisa - + Horizontal Feed Rate Prędkość posuwu w poziomie - + Vertical Feed Rate Prędkość posuwu w pionie - + Ramp Feed Rate Szybkość posuwu zejścia po rampie - + Custom Użytkownika - + Ramp Entry - Ramp Entry + Wejście po rampie - + Creates a ramp entry dress-up object from a selected toolpath - Creates a ramp entry dress-up object from a selected toolpath + Tworzy obiekt wykończenia wejścia po rampie na podstawie wybranej ścieżki narzędzia. - + Select one toolpath object - Select one toolpath object + Wybierz jeden obiekt ścieżki narzędzia - + Select a Profile object - Select a Profile object + Wybierz obiekt profilu - + The selected object is not a toolpath Wybrany obiekt nie jest ścieżką narzędzia @@ -6967,7 +6819,7 @@ Przerwanie procesu tworzenia Corrects Z depth using a probe map - Corrects Z depth using a probe map + Koryguje głębokość w osi Z przy użyciu mapy sondy. @@ -7127,12 +6979,12 @@ Przerwanie procesu tworzenia New Job - New Job + Nowe zadanie Creates a CAM job - Creates a CAM job + Tworzy zadanie CAM @@ -7145,7 +6997,7 @@ Przerwanie procesu tworzenia Creates a fixture offset - Creates a fixture offset + Tworzy przesunięcie mocowania. @@ -7154,13 +7006,13 @@ Przerwanie procesu tworzenia <b>Note</b>: This dialog shows path commands in FreeCAD base units (mm/s). Values will be converted to the desired unit during post processing. - <b>Note</b>: This dialog shows path commands in FreeCAD base units (mm/s). - Values will be converted to the desired unit during post processing. + <b>Uwaga</b>: To okno pokazuje polecenia środowiska CAM w podstawowych jednostkach dla FreeCAD (mm/s). + Wartości zostaną przekonwertowane na żądaną jednostkę podczas przetwarzania końcowego. Inspect Toolpath - Inspect Toolpath + Sprawdź ścieżkę narzędzia @@ -7171,7 +7023,7 @@ Przerwanie procesu tworzenia Select exactly one path object - Select exactly one path object + Wybierz dokładnie jeden obiekt ścieżki @@ -7184,7 +7036,7 @@ Przerwanie procesu tworzenia Exports the CAM job as a template to be used for other jobs - Exports the CAM job as a template to be used for other jobs + Eksportuje zadanie CAM jako szablon do wykorzystania w innych miejscach pracy @@ -7295,7 +7147,7 @@ Przerwanie procesu tworzenia Tool Controller - Tool Controller + Kontroler narzędzi @@ -7420,7 +7272,7 @@ Przerwanie procesu tworzenia Machine - Maszyna + Architektura komputera @@ -7541,13 +7393,13 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Legacy CAM Simulator - Legacy CAM Simulator + Starszy symulator CAM Simulates G-code on stock - Simulates G-code on stock + Symulacja G-code na półfabrykacie @@ -7600,6 +7452,21 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAMMist Mgiełka + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -7745,27 +7612,27 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM SVG post processor - SVG post processor + Post-procesor SVG Camotics Tool Library - Camotics Tool Library + Biblioteka narzędzi Camotics FreeCAD Tool Library - FreeCAD Tool Library + Biblioteka narzędzi FreeCAD LinuxCNC Tool Table - LinuxCNC Tool Table + Tabela narzędzi LinuxCNC Drill - Drill + Wiertło @@ -7840,12 +7707,12 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Camotics Tool - Camotics Tool + Narzędzie Camotics FreeCAD Tool - FreeCAD Tool + Narzędzie FreeCAD @@ -7860,7 +7727,7 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Add Tool - Add Tool + Dodaj narzędzie @@ -8614,7 +8481,7 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Select exactly one toolpath object - Select exactly one toolpath object + Wybierz dokładnie jeden obiekt ścieżki narzędzia @@ -8674,7 +8541,7 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Forward - Do przodu + Forward @@ -8689,7 +8556,7 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM Tool Controller - Tool Controller + Kontroler narzędzi @@ -8780,27 +8647,27 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAMKształt - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8821,12 +8688,12 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9117,28 +8984,15 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9210,7 +9064,7 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Shank diameter - Shank diameter + Średnica trzonu @@ -9293,17 +9147,17 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Tip angle - Tip angle + Kąt wierzchołka Endmill - Endmill + Frez czołowy Crown height - Crown height + Wysokość korony @@ -9313,22 +9167,22 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Filleted Chamfer - Filleted Chamfer + Faza z zaokrągleniem Ball diameter - Ball diameter + Średnica kuli Length of probe - Length of probe + Długość sondy Shaft diameter - Shaft diameter + Średnica wałka @@ -9338,42 +9192,42 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Reamer - Reamer + Rozwiertak Blade thickness - Blade thickness + Grubość ostrza Cap diameter - Cap diameter + Średnica główki narzędzia Cap height - Cap height + Wysokość główki narzędzia Slitting Saw - Slitting Saw + Piła szczelinowa Cutting edge length - Cutting edge length + Długość krawędzi skrawającej Tap diameter - Tap diameter + Średnica gwintownika Overall length of tap - Overall length of tap + Całkowita długość gwintownika @@ -9383,12 +9237,12 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Thread Mill - Thread Mill + Frezowanie gwintów V-Bit - V-Bit + Frez do rowków V @@ -9396,7 +9250,7 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Shank diameter - Shank diameter + Średnica trzonu @@ -9428,4 +9282,60 @@ ponieważ teraz wykorzystywana jest właściwość "TrybChłodzenia" podstawowej Kieszeń + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Wrzeciono + + + + Forward + Forward + + + + Reverse + Odwróć + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_pt-BR.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_pt-BR.ts index 205647de24..0149c2f175 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_pt-BR.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_pt-BR.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Editor do controlador de ferramentas - - Controller - Controlador - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Eixo motor - - - - Forward - Avançar - - - - Reverse - Reverter - - - Tool Ferramenta - - - Any modifications only affect this ToolController! - Qualquer modificação afeta somente este controlador de ferramentas! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Líquido de refrigeração - + Type of adaptive operation Tipo de operação adaptável - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Recorta dentro ou fora das formas selecionadas - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Se maior que zero ele limita o diâmetro da rampa de helicoidal, caso contrário 75% do diâmetro da ferramenta é usado - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Quanto para levantar a ferramenta durante o vínculo rápido e desloca sobre as regiões limpas. Se o caminho associado não estiver claro, a ferramenta será elevada à distância da altura. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Comprimento máximo do caminho para manter a ferramenta de ligação em comparação com a distância direta entre pontos. Se excedido a ligação será feito elevando a ferramenta à distância da altura. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Quantidade pela qual a ferramenta é deslocada lateralmente em cada ciclo do padrão, especificado em porcentagem do diâmetro da ferramenta. Um passo acima de 100% resulta em nenhuma sobreposição entre dois ciclos diferentes. - + Angle of the helix ramp entry Ângulo da entrada da rampa helicoidal - + Angle of the helix entry cone Ângulo de entrada do cone da helicoidal @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Parar - - - - + + + + Direction Direção - + CW Sentido Horário - + CCW Sentido Anti-horário - + Round joint Junta redonda - + Miter joint Junta reta - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Juntar: - + TextLabel Rótulo de texto @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Debicar - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Profundidade - + Retract Retrair - + Chip break Chip break - + Dwell Espera @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Formulário - + Time Tempo @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Controlador de Ferramentas - + None Nenhum - + Feed retract Alimente retrair - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retrai o furo pela taxa de alimentação em vez de um movimento rápido - + Start from Iniciar de - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Lado de Dentro - + Outside Lado de Fora - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Especifique a porcentagem do diâmetro da ferramenta no qual cada hélice será deslocada em relação à anterior. Um avanço de 100% significa que não haverá sobreposição dos cortes individuais. - - - + + + Step over percent Porcentagem de profundidade de corte @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Desativar - + Boundary Shape Forma limite - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Modo de Corte - - + + Climb Subir - - + + Conventional Convencional - + Pattern Padrão @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction O modo de corte assume que o corte de um lado da ferramenta representa a parte resultante e o outro lado ou já foi totalmente usinado ou será removido mais tarde. O modo de subida é quando a ferramenta é empurrada na direção do corte em cada rotação, enquanto no modo convencional a rotação da ferramenta e o movimento lateral dela estão na mesma direção - + Pattern the tool bit is moved in to clear the material Padrão que a ferramenta segue para limpar o material - + ZigZag Zigue-zague - + Spiral Espiral - + ZigZagOffset Offset de ZigZag - + Line Linha - + Grid Grade - + Triangle Triângulo - + Angle Ângulo - + Angle in which the pattern is applied Ângulo em que o padrão é aplicado - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Quantidade de deslocamento lateral que ferramenta adota em cada ciclo do padrão, especificado em porcentagem do diâmetro da ferramenta. Um passo acima de 100% significa nenhuma sobreposição entre dois ciclos diferentes - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape A quantidade de material que deve ser deixado por esta operação em relação à forma alvo - + Specify if this operation uses a starting point Especifica se esta operação utiliza um ponto de partida - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Se selecionada, a operação usa apenas o contorno da geometria de base e ignora todos os furos e ilhas - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Marque isto para ignorar regiões que já foram usinadas pelas operações anteriores - + Use rest machining Use rest machining - + Use Start Point Usar ponto inicial - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sonda - + X offset X offset - + Y offset Y offset - + File name File name - + Output Saída - + Enter the filename where the probe points should be written Digite o nome do arquivo onde os pontos de sonda devem ser salvos - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise A direção na qual o perfil é executado, no sentido horário ou anti-horário - + The amount of extra material left by this operation in relation to the target shape A quantidade de material extra que deve ser deixado por esta operação em relação à forma alvo - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Marque isto se esta operação tem que usar um ponto de partida - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Verifique se esta operação de perfil também deve processar furos na geometria base. Buracos encontrados são automaticamente deslocados no lado oposto e executados na direção oposta como perímetros. Observe que isto não inclui buracos cilíndricos, assumindo que eles serão perfurados - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Verifique se esta operação de perfil também deve processar o perímetro externo das formas de geometria base - + Use Compensation Usar compensação - + Process Perimeter Trabalhar perímetro - - + + Vertex Vértice - + End Feature Reference Final do recurso de referência - + Choose what point to use on the first selected feature Escolha qual ponto usar no primeiro objeto selecionado @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centro de massa - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Escolha qual ponto usar no segundo objeto selecionado - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Valores positivos estendem o início da trajetória, valores negativos encurtam - + Extend Path End Estender o Caminho final - + Positive extends the end of the path, negative shortens Valores positivos estendem o fim da trajetória, valores negativos encurtam - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Realiza a operação em um único passo de profundidade, ou passos múltiplos para a profundidade final - + Single-pass Passe único - + Multi-pass Multi-passe - + Perpendicular Perpendicular - + Enable to reverse the cut direction of the slot path Ativar para inverter a direção de corte da trajetória do rebaixo - + Reverse cut direction Inverter a direção do corte - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Deslocamento suplementar X, Y da caixa de delimitação - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Linhas de Dropcutter são criadas em paralelo a este eixo. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Defina a resolução de amostragem. Valores menores aumentarão o tempo de processamento. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Habilitar otimização de trajetórias lineares (pontos co-lineares). Remove pontos co-lineares desnecessários da saída G-Code. - + Enable separate optimization of transitions between, and breaks within, each step over path. Habilitar otimização separada das transições internas e quebras internas em cada etapa da trajetória. - + Depth offset Deslocamento da profundidade - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Avançar - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Um passo acima de 100% não resultará em nenhuma sobreposição entre dois ciclos diferentes. - - + + Sample interval Intervalo de amostragem @@ -2173,114 +2141,119 @@ Padrão: 3 mm Vertical - + Thread Rosca - + Orientation Orientação - + Type Tipo - + Fit Ajustar - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Passo do dente - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPP - + Operation Operação - + Passes Passa - + Discretization Deflection Desvio de discreção - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Deslocamento no eixo Z no passo de acabamento - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Deslocamento da fresa para passo de acabamento. Use um valor pequeno como -0,2 mm para ajudar a limpar "superfície difusa" ou outros artefatos. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Passo de acabamento - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Otimizar movimentos - + Algorithm Algoritmo @@ -2443,17 +2416,17 @@ Se o raio for maior do que aquele que a etiqueta molda em si, a forma resultante Geração de Etiquetas - + G-Code G-Código - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3226,7 +3199,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Adicionar @@ -3266,126 +3238,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copiar de - - - Surface - Superfície - - - - Remove - Remover - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Atualizar - - - - All objects will be profiled using the same depth and speed settings - Todos os objetos serão perfilados com a mesma profundidade e configuração de velocidade - - - - Depths - Profundidades - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Alturas - - - - Operation - Operação - - - - The tool and its settings to be used for this operation. - A ferramenta e suas configurações a serem utilizadas para esta operação. - - - - Algorithm - Algoritmo - Z Depth Correction @@ -4154,17 +4006,17 @@ Padrão: 3 mm Editar - + Drag Slider to Simulate Arraste a barra deslizante para simular - + Save Project As Salvar Projeto como - + CAMotics Project (*.camotics) Projeto CAMotics (*.camotics) @@ -4201,17 +4053,17 @@ Padrão: 3 mm RPM do eixo - + Selected tool is not a drill A ferramenta selecionada não é uma broca - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Ângulo de corte de aresta (%.2f) resulta num Comprimento de Ponta da ferramenta negativa @@ -4259,12 +4111,12 @@ Padrão: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s não é suportado para inversão - + Zero working area to process. Check your selection and settings. Nenhuma área trabalhável para processar. Verifique a sua seleção e as configurações. @@ -4440,8 +4292,8 @@ Padrão: 3 mm - - + + The base toolpath to modify O caminho de base para modificar @@ -4462,90 +4314,90 @@ Padrão: 3 mm Altura a subir durante a ação de canto - + Calculate roll-on to toolpath Calcular rolagem para o percurso da ferramenta - + Calculate roll-off from toolpath Calcula o afastamento à trajetória - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Executar mergulhos com G0 - + Angle of ramp Angle of ramp - + Ramping Method Método de subida - + Which feed rate to use for ramping Qual taxa de alimentação usar para rampa - + Custom feed rate Taxa de alimentação personalizada - + Should the dressup ignore motion commands above DressupStartDepth Deve esta operação ignorar comandos de movimento acima de DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. A profundidade onde a rampa está ativada. Acima desta rampa não é gerada, mas os comandos de movimento são passados como está. @@ -6350,80 +6202,80 @@ Use property KeepToolDown to change this Tornar False, para evitar que a operação gere código - + Edit Editar - + Base Geometry Geometria base - + Multiple operations are labeled as Várias operações são rotuladas como - + Base Location Posição de base - + Heights Alturas - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. A profundidade final não pode ser modificado para esta operação. Se for necessário definir essa profundidade manualmente, por favor selecione uma operação diferente. - + Depths Profundidades - + Diameters Diâmetros - + AreaOp Operation Operação AreaOp - + Operation Operação - + Uncreate AreaOp Operation Elimina Operação de AreaOp - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Nenhum controle de ferramenta adequado encontrado. Abortando criação de operação - + No tool controller, aborting op creation Sem controlador de ferramenta, abortando criação de op @@ -6634,51 +6486,51 @@ Abortando criação de operação Manter a ferramenta abaixada no caminho da ferramenta - - + + Arc Arco - - + + Tangent Tangente - - + + Perpendicular Perpendicular - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Avanço de Entrada/Saída - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6848,67 +6700,67 @@ Abortando criação de operação CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Hélice - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Personalizado - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7584,6 +7436,21 @@ Abortando criação de operação Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8656,7 +8523,7 @@ Abortando criação de operação Forward - Avançar + Forward @@ -8762,27 +8629,27 @@ Abortando criação de operação Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8803,12 +8670,12 @@ Abortando criação de operação CAM_Camotics - + CAMotics CAmotica - + Simulates using CAMotics Simulates using CAMotics @@ -9097,28 +8964,15 @@ Abortando criação de operação The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9408,4 +9262,60 @@ Abortando criação de operação Perfuração + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Eixo motor + + + + Forward + Forward + + + + Reverse + Inverter + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ro.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ro.ts index d8023ef9a8..99750ed500 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ro.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ro.ts @@ -309,62 +309,10 @@ For stock from the base object's bounding box it means the extra material i Editor de controler de instrumente - - Controller - inspector - - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Ax - - - - Forward - Înainte - - - - Reverse - Invers - - - Tool Instrument - - - Any modifications only affect this ToolController! - Orice modificare afectează numai acest Inspector de instrumente! - Tool Editor @@ -959,7 +907,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -973,12 +921,12 @@ Reset deletes all current items from the list and fills the list with all circul Coolant - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -987,37 +935,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1035,73 +983,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1110,57 +1077,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Stop - - - - + + + + Direction Direcţia - + CW CW - + CCW CCW - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1174,22 +1141,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel TextLabel @@ -1204,43 +1171,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Ia - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Adâncimea - + Retract Retragere - + Chip break Chip break - + Dwell Zbor @@ -1251,7 +1218,7 @@ This option changes that behavior to cut each discrete area to its full depth be Formular - + Time Timp @@ -1278,61 +1245,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Niciunul - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Pornire de la - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside În interior - + Outside În afara - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Pas peste procentaj @@ -1402,12 +1369,12 @@ This option changes that behavior to cut each discrete area to its full depth be Dezactivare - + Boundary Shape Formă limită - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1416,24 +1383,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Mod de tăiere - - + + Climb Urcare - - + + Conventional Convențional - + Pattern Model @@ -1475,266 +1442,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Spirală - + ZigZagOffset ZigZagOffset - + Line Linie - + Grid Grilă - + Triangle Triunghi - + Angle Unghi - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Folosește punctul de pornire - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Ieşire - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1744,299 +1711,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centrul de masă - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular Perpendicular - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Caseta de încadrare extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Activează optimizarea căilor liniare (puncte co-liniare). Elimină puncte co-liniare inutile de la ieșirea prin codul G. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Deplasare adâncime - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over A ieși din - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2045,8 +2012,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Intervalul de eșantionare @@ -2174,114 +2141,119 @@ Default: 3 mm Verticală - + Thread Discuchar@@0ie - + Orientation Orientarea - + Type Tip - + Fit potrivește - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pas - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operațiune - + Passes Pase - + Discretization Deflection Deficit de discretizare - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algoritm @@ -2444,17 +2416,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3227,7 +3199,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Adaugă @@ -3267,126 +3238,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Suprafață - - - - Remove - Elimină - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Actualizare - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Adâncimea - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Înălţimi - - - - Operation - Operațiune - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algoritm - Z Depth Correction @@ -4151,17 +4002,17 @@ Default: 3 mm Editare - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4198,17 +4049,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4256,12 +4107,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4437,8 +4288,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4459,90 +4310,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6347,81 +6198,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Editare - + Base Geometry Geometria de bază - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Înălţimi - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Adâncimea - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operațiune - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6632,51 +6483,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Arc - - + + Tangent Tangenta - - + + Perpendicular Perpendicular - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Plumb in/Iesit - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6846,67 +6697,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Spirala - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Personalizat - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7582,6 +7433,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8654,7 +8520,7 @@ Aborting op creation Forward - Înainte + Forward @@ -8760,27 +8626,27 @@ Aborting op creation Forma - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8801,12 +8667,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9095,28 +8961,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9406,4 +9259,60 @@ Aborting op creation Buzunar + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Ax + + + + Forward + Forward + + + + Reverse + Invers + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_ru.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_ru.ts index 9c26e52709..db07cdd5d0 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_ru.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_ru.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Редактор инструментов - - Controller - Контроллер - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Обороты - - - - Forward - Вперёд - - - - Reverse - Реверс - - - Tool Инструмент - - - Any modifications only affect this ToolController! - Любые изменения затрагивают только этот контроллер инструмента! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Охлаждающая жидкость - + Type of adaptive operation Тип адаптивной операции - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Большие значения (кроме справа) будут вычисляться быстрее; меньшие значения (далее слева) позволят получить более точные пути инструментов. - + Cut inside or outside of the selected shapes Вырезать внутри или снаружи выбранных фигур - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Если он больше нуля, он ограничивает диаметр наклона спирали, в противном случае используется 75 процентов диаметра инструмента - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. На сколько поднимать инструмент во время быстрых связующих перемещений по расчищенным участкам. Если путь соединения не свободен, инструмент поднимается на безопасную высоту. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Максимальная длина пути соединения удерживающего инструмента в нижнем положении по сравнению с прямым расстоянием между точками. В случае превышения звено будет выполнено путем подъема инструмента на безопасную высоту. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Величина, на которую инструмент смещается вбок в каждом цикле шаблона, указывается в процентах от диаметра инструмента. Шаг свыше 100% приводит к отсутствию перекрытия между двумя разными циклами. - + Angle of the helix ramp entry Угол шага спирали входа - + Angle of the helix entry cone Угол входного конуса спирали @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be Эта опция изменяет это поведение, чтобы вырезать каждую область до полной глубины до перехода к следующей. - + Order cuts by region Организовать обработку по регионам - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Сколько материала оставлять по оси Z (т.е. для отделки зданий) - + Stop Остановить - - - - + + + + Direction Направление - + CW ПЧ - + CCW ПРЧ - + Round joint Круглый стык - + Miter joint Угловое соединение - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be мм - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Соединить: - + TextLabel Текстовая надпись @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Долбить[Клевать] - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Глубина - + Retract Втянуть - + Chip break Chip break - + Dwell Задержка(Остановка) @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Форма - + Time Время @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Контроллер инструментов - + None Ничего - + Feed retract Втягивание подачи - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Отвод из отверстия с заданной скоростью подачи вместо быстрого перемещения - + Start from От - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Внутри - + Outside Снаружи - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Укажите процент от диаметра инструмента, на который каждая спираль будет смещена по отношению к предыдущей. Шаг 100% означает отсутствие перекрытия отдельных резов. - - - + + + Step over percent Шаг с обходом в процентах @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Отключить - + Boundary Shape Граница формы - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Режим резки - - + + Climb Подъём - - + + Conventional Общепринятый - + Pattern Шаблон @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Режим резки предполагает, что резка на одной стороне резца представляет собой результирующую часть, а другая сторона либо уже отфрезерована, либо будет удалена позже. Режим подъема — это когда резец перемещается в резку при каждом повороте, тогда как в обычном режиме вращение резца и боковое движение инструмента происходят в одном направлении - + Pattern the tool bit is moved in to clear the material Шаблон, в который перемещается насадка инструмента, чтобы очистить материал - + ZigZag ZigZag - + Spiral Спираль - + ZigZagOffset ZigZag смещение - + Line Линия - + Grid Сетка - + Triangle Треугольник - + Angle Угол - + Angle in which the pattern is applied Угол, под которым наносится рисунок - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Величина, на которую инструмент смещается вбок в каждом цикле шаблона, указывается в процентах от диаметра инструмента. Шаг свыше 100 % приводит к отсутствию перекрытия между двумя разными циклами - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Количество материала, которое должно быть оставлено этой операцией по отношению к целевой форме - + Specify if this operation uses a starting point Укажите, использует ли эта операция начальную точку - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Если выбрано, операция использует контур выбранной базовой геометрии и игнорирует все отверстия и островки - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Установите этот флажок, чтобы пропустить области обработки, которые уже были очищены предыдущими операциями - + Use rest machining Use rest machining - + Use Start Point Использовать начальную точку - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Пробник - + X offset X offset - + Y offset Y offset - + File name File name - + Output Вывод - + Enter the filename where the probe points should be written Введите имя файла, в котором должны быть записаны точки зондирования - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER МЕСТО - - + + The direction in which the profile is performed, clockwise or counterclockwise Направление, в котором выполняется профиль, по часовой стрелке или против часовой стрелки - + The amount of extra material left by this operation in relation to the target shape Количество дополнительного материала, оставленного этой операцией по отношению к целевой форме - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass При выполнении нескольких проездов, дополнительное смещение каждого дополнительного пропуска - + Check if this operation should use a starting point Проверьте, должна ли эта операция использовать начальную точку - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Проверьте, должна ли эта операция профиля также обрабатывать отверстия в базовой геометрии. Найденные отверстия автоматически смещаются на противоположную сторону разреза и выполняются в противоположном направлении как периметры. Обратите внимание, что это не включает цилиндрические отверстия, предполагается, что они будут просверлены - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Проверьте, должна ли эта операция профиля также обрабатывать внешний периметр фигур базовой геометрии - + Use Compensation Использовать Компенсацию - + Process Perimeter Делать периметр - - + + Vertex Вершина - + End Feature Reference Закрыть справочник параметров - + Choose what point to use on the first selected feature Выберите, какую точку использовать на первом выбранном объекте @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Центр масс - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Выберите, какую точку использовать на втором выбранном объекте - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Положительное значение удлиняет начало пути, отрицательное — укорачивает - + Extend Path End Завершение траектории - + Positive extends the end of the path, negative shortens Положительное значение расширяет конец пути, отрицательное — сокращает - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Завершите операцию за один проход на глубину или за несколько проходов до конечной глубины - + Single-pass Одноразовый переход - + Multi-pass Многопроходный - + Perpendicular Перпендикулярно - + Enable to reverse the cut direction of the slot path Включите, чтобы изменить направление резки траектории прорези - + Reverse cut direction Поменять направление обработки - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Дополнительное смещение габаритов детали X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Линии отреза создаются параллельно этой оси. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Установите разрешение выборки. Меньшие значения быстро увеличивают время обработки. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Включить оптимизацию линейных путей (коллинеарных точек). Удаляет ненужные коллинеарные точки из вывода G-кода. - + Enable separate optimization of transitions between, and breaks within, each step over path. Включить отдельную оптимизацию переходов между частями операции. - + Depth offset Смещение Глубины - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Шаг с обходом - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Шаг свыше 100% приводит к отсутствию перекрытия между двумя разными циклами. - - + + Sample interval Пример интервала @@ -2172,114 +2140,119 @@ Default: 3 mm Вертикальный - + Thread Резьба - + Orientation Ориентация - + Type Тип - + Fit Посадка - + Major diameter Основной диаметр - + Minor diameter Малый диаметр - + Lead in/out Lead in/out - + Pitch Шаг подачи - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI Шаг на дюйм - + Operation Операция - + Passes Проходы - + Discretization Deflection Отклонение дискретизации - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Это значение используется для дискретизации дуг на сегменты. Меньшие значения приведут к большему gcode. Большие значения могут привести к нежелательным сегментам на траектории средней линии. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Смещение Z при чистовом проходе - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Смещение концевой фрезы для чистового прохода. Используйте небольшое значение, например -0,2 мм, чтобы помочь убрать «ворсистую кожу» или другие артефакты. - + After carving, travel again the path to remove artifacts and imperfections После резьбы пройдитесь еще раз по тропинке, чтобы удалить артефакты и несовершенства - + Finishing pass Финишный проход - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Оптимизировать движения - + Algorithm Алгоритм @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Генерация тегов (перемычек, держателей) - + G-Code G-код - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3222,7 +3195,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Добавить @@ -3262,126 +3234,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Копировать из - - - Surface - Поверхность - - - - Remove - Убрать - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Обновить - - - - All objects will be profiled using the same depth and speed settings - Все объекты будут обработаны с одинаковыми настройками глубины и скорости - - - - Depths - Глубины - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Высоты - - - - Operation - Операция - - - - The tool and its settings to be used for this operation. - Инструмент и его настройки, которые будут использоваться для этой операции. - - - - Algorithm - Алгоритм - Z Depth Correction @@ -4143,17 +3995,17 @@ Default: 3 mm Редактировать - + Drag Slider to Simulate Перетащите слайдер для симуляции - + Save Project As Сохранить проект как - + CAMotics Project (*.camotics) Проект CAMotics (*.camotics) @@ -4190,17 +4042,17 @@ Default: 3 mm Обороты шпинделя - + Selected tool is not a drill Выбранный инструмент не является сверлом - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Недопустимый угол резки %.2f, должен быть >0° и <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Угол режущей кромки (%.2f) приводит к отрицательной длине наконечника инструмента @@ -4248,12 +4100,12 @@ Default: 3 mm isHorizontal(%s) не поддерживается - + %s not supported for flipping %s не поддерживает переворот - + Zero working area to process. Check your selection and settings. Нулевая рабочая зона для обработки. Проверьте свой выбор и настройки. @@ -4429,8 +4281,8 @@ Default: 3 mm - - + + The base toolpath to modify Базовая траектория инструмента, которую нужно изменить @@ -4451,90 +4303,90 @@ Default: 3 mm Высота подъема при повороте - + Calculate roll-on to toolpath Рассчитать переход к траектории инструмента - + Calculate roll-off from toolpath Рассчитать скат по траектории инструмента - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Выполнить подходы (погружение, вгрызание) со скоростью G0 - + Angle of ramp Angle of ramp - + Ramping Method Метод входа - + Which feed rate to use for ramping Какую подачу использовать для врезания - + Custom feed rate Заданная скорость подачи - + Should the dressup ignore motion commands above DressupStartDepth Следует ли игнорировать команды движения над глубиной перемычек DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Глубина, на которой разрешена перемычка. Выше этого перемычки не генерируются, но команды движения передаются как есть. @@ -6339,81 +6191,81 @@ Use property KeepToolDown to change this Установите значение в False, чтобы предотвратить генерацию G-кода для операции - + Edit Редактировать - + Base Geometry Базовая Геометрия - + Multiple operations are labeled as Множественные операции обозначены как - + Base Location Базовое Расположение - + Heights Высоты - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. Конечная глубина не может быть изменена для этой операции. Если необходимо установить конечную глубину вручную, выберите другую операцию. - + Depths Глубины - + Diameters Диаметры - + AreaOp Operation Операции на доступном пространстве - + Operation Операция - + Uncreate AreaOp Operation Отменить операцию на пространстве - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Не найден подходящий контроллер инструментов. Прерываем команду - + No tool controller, aborting op creation Нет контроллера инструмента, отмена создания команды @@ -6624,51 +6476,51 @@ Aborting op creation Держите инструмент ниже на пути - - + + Arc Дуга - - + + Tangent Касательная - - + + Perpendicular Перпендикулярно - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Подача/Отвод инструмента - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Выбранный объект не является траекторией инструмента @@ -6838,67 +6690,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 Метод уклона(ramp) 1 - + RampMethod2 Метод уклона 2 - + RampMethod3 Метод уклона 3 - + Helix Спираль - + Horizontal Feed Rate Скорость горизонтальной подачи - + Vertical Feed Rate Скорость вертикальной подачи - + Ramp Feed Rate Скорость линейной подачи - + Custom Произвольный - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Выбранный объект не является траекторией инструмента @@ -7574,6 +7426,21 @@ Aborting op creation Mist Распыление + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8646,7 +8513,7 @@ Aborting op creation Forward - Вперёд + Forward @@ -8752,27 +8619,27 @@ Aborting op creation Фигура(ы) - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8793,12 +8660,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9087,28 +8954,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9398,4 +9252,60 @@ Aborting op creation Карман + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Обороты + + + + Forward + Forward + + + + Reverse + Развернуть + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_sl.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_sl.ts index f6b5f437c4..28ef671522 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_sl.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_sl.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Urejevalnik orodnega krmilnika - - Controller - Krmilnik - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Vreteno - - - - Forward - Naprej - - - - Reverse - Obrni - - - Tool Orodje - - - Any modifications only affect this ToolController! - Katerakoli sprememba vpliva le na ta orodni krmilnik! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Hladilo - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Rezkanje po notranji ali zunanji strani izbranih oblik - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Če je večji od nič, omejuje premer vijačnega dviganja, v nasprotnem primeru pa se upošteva 75 odstotkov premera orodja - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Koliko se dvigne orodje pri hitrih povezovalnih premikih nad prostimi območji. Če povezovalna pot ni prosta, se orodje dvigne na prosto višino. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Največja dolžina povezovalne poti v načinu "ohranjanja spuščenega orodja" v primerjavi z ravno razdaljo med točkama. Če je navečja dolžina presežena, bo povezava izvedena z dvigom orodja na prosto višino. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Koliko se orodje vodoravno zmakne pri vsaki ponovitvi vzorca je določeno v odstotnem deležu premera orodja. Stoodstotni zmik pomeni, da se pri ponovitvi vzorec ne prekriva. - + Angle of the helix ramp entry Kot vstopanja v vijačno klančino - + Angle of the helix entry cone Kot stožca vijačnega vstopa @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Ustavi - - - - + + + + Direction Smer - + CW SUK, v smeri urinega kazalca - + CCW NSUK, v nasprotni smeri urinega kazalca - + Round joint Zaokrožen spoj - + Miter joint Spoj na zajero - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Spoji: - + TextLabel Besedilna oznaka @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Kljuvanje - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Globina - + Retract Vračanje - + Chip break Chip break - + Dwell Mirovanje @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Oblika - + Time Čas @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Orodni krmilnik - + None Brez - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Začni od - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Znotraj - + Outside Zunaj - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Določi zamik vsake vijačnice glede na predhodnjo kot odstotek premera orodja. Stoodstotni zmik pomeni, da se rezi med seboj ne prekrivajo. - - - + + + Step over percent Odstotek zmika @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Onemogoči - + Boundary Shape Mejna oblika - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Rezalni način - - + + Climb Plezanje, Istosmerno (način rezkanja, nasproten od protismernega -convetional) - - + + Conventional Običajen, Protismerno (način rezkanja, nasproten od istosmernega -climb) - + Pattern Vzorec @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Vzorec s katerim orodje napreduje, da umika gradivo - + ZigZag Cikcak - + Spiral Viba - + ZigZagOffset CikcakOdmik - + Line Črta - + Grid Mreža - + Triangle Trikotnik - + Angle Kot - + Angle in which the pattern is applied Kot razpostavljanja - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Koliko se orodje vodoravno zmakne pri vsaki ponovitvi vzorca je določeno v odstotnem deležu premera orodja. Več kot stoodstotni zmik pomeni, da se pri ponovitvi vzorec ne prekriva - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Količina gradiva v odnosu na željeno obliko, ki naj po končanem dejanju ostane - + Specify if this operation uses a starting point Določi, če ima to dejanje izhodišče - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Če je označeno, dejanje uporabi le zunanji obris izbrane izhodiščne geometrije ter prezre vse luknje in otoke - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Uporabi začetno točko - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Tipalo - + X offset X offset - + Y offset Y offset - + File name File name - + Output Izpis - + Enter the filename where the probe points should be written Vnesite ime datoteke, v katero želite shraniti tipalne točke - + ProbePoints.txt TipalneTočke.txt - - + + PLACEHOLDER PROSTORNIK - - + + The direction in which the profile is performed, clockwise or counterclockwise Smer izvajanje orisa; v smeri urinega kazalca ali v nasprotni smeri urinega kazalca - + The amount of extra material left by this operation in relation to the target shape Količina gradiva v odnosu na željeno obliko, ki po končanem dejanju ostane - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Označite, če želite, da to dejanje uporabi izhodišče - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Označite, če želite, da to dejanje orisa obdela tudi luknje v izhodiščni geometriji. Prepoznane luknje se samodejno odmakne na nasprotno stran rezanja in izvede v drugi smeri od oboda. Opomba: to ne vključuje valjastih lukenj, saj je predvideno, da se bodo vrtale - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Označite, če želite, da orisno dejanje obdela tudi zunanji obod oblik izhodiščne geometrije - + Use Compensation Uporabi izravnavo - + Process Perimeter Obdelaj obod - - + + Vertex Oglišče - + End Feature Reference Končni sklic značilnsoti - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Težišče - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Podaljšanje konca poti - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Enoprehodno - + Multi-pass Večprehodno - + Perpendicular Pravokoten - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Obratna smer rezanja - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Dodatni odmik očrtnega kvadra po x in y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Poteze spustnega rezkanja bodo vzporedne tej osi. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Določite ločlivost vzorčenja. Z manjšanjem vrednosti se hitro povečuje obdelovalni čas. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Omogoči optimiranje premih poti (sopreme točke). Odstrani iz izvoza G-Code nepotrebne sopreme točke. - + Enable separate optimization of transitions between, and breaks within, each step over path. Omogoči ločeno izboljševanje prehodov med vsako zmaknjeno potjo in prekinitvami znotraj nje. - + Depth offset Zamik globine - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Zmik - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Več kot stoodstotni zmik pomeni, da se pri ponovitvi vzorec ne prekriva. - - + + Sample interval Vzorčni korak @@ -2172,114 +2140,119 @@ Privzeto: 3 mm Navpično - + Thread Navoj - + Orientation Usmerjenost - + Type Vrsta - + Fit Prileganje - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Naklon, korak (pri navoju in verižnikih) - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI NNP - + Operation Dejanje - + Passes Preleti - + Discretization Deflection Odmik pri odsekovni poenostavitvi - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Zamik zaključnega prehoda po Z-ju - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Odmik čelnega rezkarja pri dokončevalnem prehodu. Z določitvijo manjših vrednosti, kot npr. -0,2 mm, lahko odstranite "vlaknatost površine" ali druge pokvarbe. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Dokončevalni prehod - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algoritem @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Ustvarjanje mostičkov - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Dodaj @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopiraj z - - - Surface - Površina - - - - Remove - Odstrani - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Posodobi - - - - All objects will be profiled using the same depth and speed settings - Vsi predmeti bodo orisani z enakimi globinskimi in hitrostnimi nastavitvami - - - - Depths - Globine - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Višine - - - - Operation - Dejanje - - - - The tool and its settings to be used for this operation. - Orodje in njegove nastavitve za to dejanje. - - - - Algorithm - Algoritem - Z Depth Correction @@ -4149,17 +4001,17 @@ Privzeto: 3 mm Uredi - + Drag Slider to Simulate Za priustvarjanje vlecite drsnik - + Save Project As Shrani projekt kot - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Privzeto: 3 mm Obr./min vretena - + Selected tool is not a drill Izbrano orodje ni sveder - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Kót rezilnega roba (%.2f) ima za posledico negativno dolžino konice orodja @@ -4254,12 +4106,12 @@ Privzeto: 3 mm isHorizontal(%s) ni podprt - + %s not supported for flipping %s ne podpira preobračanja - + Zero working area to process. Check your selection and settings. Nič delovne površine za obdelovanje. Preverite vaš izbor in nastavitve. @@ -4435,8 +4287,8 @@ Privzeto: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Privzeto: 3 mm Višina na katero naj se dvigne med kotnim dejanjem - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Izvedi zarivanja z G0 - + Angle of ramp Angle of ramp - + Ramping Method Klančinski način - + Which feed rate to use for ramping Katero podajalno hitrost uporabiti za klančino - + Custom feed rate Podjalna hitrost po meri - + Should the dressup ignore motion commands above DressupStartDepth Bi morala dodelava prezreti ukaze gibanja nad ZačetnoGlobinoDodelave - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Globina, pri kateri je dodelava s spustno klančino omogočena. Nad to globino spustne klančine niso ustvarjene in navodila za gibanja so posredovana takšna, kot so. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Spremeni v Napak, da se opravilu prepreči ustvarjanje kode - + Edit Uredi - + Base Geometry Osnovna Geometrija - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Višine - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Globine - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Dejanje - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Ohrani orodje spuščeno na poti - - + + Arc Lok - - + + Tangent Dotikalnica - - + + Perpendicular Pravokoten - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Vstopanje/Izstopanje - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Vijačnica - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Po meri - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - Naprej + Forward @@ -8758,27 +8625,27 @@ Aborting op creation Oblika(e) - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Ugrez + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Vreteno + + + + Forward + Forward + + + + Reverse + Obrni + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_sr-CS.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_sr-CS.ts index d56be76b51..f041d4ea42 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_sr-CS.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_sr-CS.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Kontroler - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindle - - - - Forward - Forward - - - - Reverse - Obrnuto - - - Tool Alatka - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Rashladna tečnost - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Zaustavi - - - - + + + + Direction Pravac - + CW SKS - + CCW SSKS - + Round joint Round joint - + Miter joint Spoj pod 45 stepeni - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel Tekstualna oznaka @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Dubina - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Obrazac - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Nijedan - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inside - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Onemogući - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern Pattern @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Spirala - + ZigZagOffset ZigZagOffset - + Line Duž - + Grid Koordinatna mreža - + Triangle Trougao - + Angle Ugao - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Izlaz - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Centar mase - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular Upravnost - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Dodatni odmak X i Y granične kutije - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Step over - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Vertikalnost - + Thread Navoj - + Orientation Orijentacija - + Type Vrsta - + Fit Fit - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Dodaj @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Površ - - - - Remove - Ukloni - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Ažuriranje - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Depths - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Heights - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Uredi - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Uredi - + Base Geometry Base Geometry - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Heights - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Depths - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Kružni luk - - + + Tangent Tangenta - - + + Perpendicular Upravnost - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Zavojnica - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Sopstvena - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation Oblik - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Udubljenje + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + Obrnuto + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_sr.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_sr.ts index 7424406b6b..d57482750c 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_sr.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_sr.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Контролер - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindle - - - - Forward - Forward - - - - Reverse - Обрнуто - - - Tool Алатка - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Расхладна течност - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Заустави - - - - + + + + Direction Правац - + CW СКС - + CCW ССКС - + Round joint Round joint - + Miter joint Спој под 45 степени - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be мм - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel Текстуална ознака @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Дубина - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Образац - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None Ниједан - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inside - + Outside Outside - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Онемогући - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern Pattern @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Спирала - + ZigZagOffset ZigZagOffset - + Line Дуж - + Grid Координатна мрежа - + Triangle Троугао - + Angle Угао - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Излаз - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Центар масе - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular Управан - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Додатни одмак X и Y граничне кутије - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Step over - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm Вертикалност - + Thread Навој - + Orientation Оријентација - + Type Врста - + Fit Fit - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Додај @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Површ - - - - Remove - Уклони - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Ажурирање - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Depths - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Heights - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Уреди - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Уреди - + Base Geometry Base Geometry - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Heights - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Depths - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Кружни лук - - + + Tangent Тангента - - + + Perpendicular Управан - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Завојница - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Сопствена - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation Облик - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Удубљење + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + Обрнуто + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_sv-SE.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_sv-SE.ts index e20ef0cf3c..fbeed199b1 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_sv-SE.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_sv-SE.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Tool Controller Editor - - Controller - Kontroller - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Spindel - - - - Forward - Framåt - - - - Reverse - Omvänd - - - Tool Verktyg - - - Any modifications only affect this ToolController! - Eventuella ändringar påverkar endast denna ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Kylmedel - + Type of adaptive operation Typ av adaptiv operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Större värden (längre till höger) ger snabbare beräkningar; mindre värden (längre till vänster) ger mer exakta verktygsbanor. - + Cut inside or outside of the selected shapes Skär på insidan eller utsidan av de valda formerna - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used Om den är större än noll begränsar den helixrampens diameter, annars används 75 procent av verktygets diameter - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. Hur mycket verktyget ska lyftas upp under de snabba länkningsrörelserna över röjda områden. Om länkningsvägen inte är fri lyfts verktyget till fri höjd. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max längd på länkvägen för att hålla verktyget nere jämfört med det direkta avståndet mellan punkterna. Om detta överskrids kommer länkningen att ske genom att verktyget lyfts till fri höjd. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Det mått med vilket verktyget förskjuts i sidled vid varje cykel av mönstret, angivet i procent av verktygets diameter. Ett step over på 100% r resulterar i att det inte blir någon överlappning mellan två olika cykler. - + Angle of the helix ramp entry Vinkel på helixrampens ingång - + Angle of the helix entry cone Vinkel på helixens ingångskon @@ -1033,73 +982,92 @@ Större värden (längre till höger) ger snabbare beräkningar; mindre värden Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be Detta alternativ ändrar detta beteende så att varje diskret område skärs till sitt fulla djup innan man går vidare till nästa. - + Order cuts by region Orderminskningar per region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) Hur mycket material som ska lämnas kvar längs Z-axeln (t.ex. för efterbearbetning) - + Stop Stopp - - - - + + + + Direction Riktning - + CW Medurs - + CCW Moturs - + Round joint Rund led - + Miter joint Geringsfog - - + + @@ -1172,22 +1140,22 @@ Detta alternativ ändrar detta beteende så att varje diskret område skärs til mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Gå med: - + TextLabel TextLabel @@ -1202,43 +1170,43 @@ Detta alternativ ändrar detta beteende så att varje diskret område skärs til Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Djup - + Retract Dra tillbaka - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ Detta alternativ ändrar detta beteende så att varje diskret område skärs til Form - + Time Tid @@ -1276,61 +1244,61 @@ Detta alternativ ändrar detta beteende så att varje diskret område skärs til VerktygsController - + None Inget - + Feed retract Matningsretract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Dra tillbaka från hålet med den angivna matningshastigheten istället för snabbdragning - + Start from Starta från - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Inuti - + Outside Utanför - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Ange hur många procent av verktygsdiametern som varje spiral ska förskjutas i förhållande till den föregående. En förskjutning på 100% innebär ingen överlappning av de enskilda snitten. - - - + + + Step over percent Steg över procent @@ -1400,12 +1368,12 @@ Detta alternativ ändrar detta beteende så att varje diskret område skärs til Avaktivera - + Boundary Shape Gränsernas form - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Klippläge - - + + Climb Klättra - - + + Conventional Konventionell - + Pattern Mönster @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Skärläget förutsätter att skäret på ena sidan av verktygsbiten representerar den resulterande delen och att den andra sidan antingen redan är bortfräst eller kommer att tas bort senare. I klättringsläget flyttas verktygsbiten in i skäret vid varje rotation, medan verktygsbitens rotation och verktygets sidoförflyttning i konventionellt läge sker i samma riktning - + Pattern the tool bit is moved in to clear the material Mönster verktygsbiten förs in för att rensa materialet - + ZigZag Sicksack - + Spiral Spiral - + ZigZagOffset ZigZagOffset - + Line Linje - + Grid Rutnät - + Triangle Triangel - + Angle Vinkel - + Angle in which the pattern is applied Vinkel i vilken mönstret appliceras - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Det mått med vilket verktyget förskjuts i sidled vid varje cykel av mönstret, angivet i procent av verktygets diameter. Ett step over på 100% r resulterar i ingen överlappning mellan två olika cykler - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape Den mängd material som ska lämnas kvar av denna operation i förhållande till målformen - + Specify if this operation uses a starting point Ange om denna operation använder en startpunkt - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Om detta väljs använder operationen konturen av den valda basgeometrin och ignorerar alla hål och öar - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Kontroll för att hoppa över bearbetningsområden som redan har rensats av tidigare operationer - + Use rest machining Use rest machining - + Use Start Point Använd startpunkt - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Sond - + X offset X offset - + Y offset Y offset - + File name File name - + Output Utmatning - + Enter the filename where the probe points should be written Ange filnamnet där probepunkterna ska skrivas - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLATSINNEHAVARE - - + + The direction in which the profile is performed, clockwise or counterclockwise Den riktning i vilken profilen utförs, medurs eller moturs - + The amount of extra material left by this operation in relation to the target shape Mängden extra material som lämnas kvar av denna operation i förhållande till målformen - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass Om du gör flera passeringar, extra offset för varje ytterligare passering - + Check if this operation should use a starting point Kontrollera om denna operation ska använda en startpunkt - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Kontrollera om denna profiloperation även ska bearbeta hål i basgeometrin. Hittade hål förskjuts automatiskt till den motsatta skärsidan och utförs i motsatt riktning som omkretsar. Observera att detta inte inkluderar cylindriska hål, eftersom de antas bli borrade - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Kontrollera om denna profiloperation också ska bearbeta den yttre omkretsen av basgeometriformerna - + Use Compensation Använd kompensation - + Process Perimeter Processens perimeter - - + + Vertex Hörn - + End Feature Reference Referens för slutfunktion - + Choose what point to use on the first selected feature Välj vilken punkt som ska användas på den första valda funktionen @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Masscentrum - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Välj vilken punkt som ska användas på den andra valda funktionen - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positivt förlänger början av vägen, negativt förkortar - + Extend Path End Förläng stigen Slut - + Positive extends the end of the path, negative shortens Positivt förlänger slutet på vägen, negativt förkortar - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Slutför operationen i en enda passage på djupet, eller flera passager till slutligt djup - + Single-pass Enkel passage - + Multi-pass Multi-pass - + Perpendicular Vinkelrät - + Enable to reverse the cut direction of the slot path Gör det möjligt att vända klippriktningen för spårbanan - + Reverse cut direction Omvänd klippriktning - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter-linjerna skapas parallellt med denna axel. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Ställ in upplösningen för provtagningen. Mindre värden ökar snabbt bearbetningstiden. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Möjliggör optimering av linjära banor (co-linjära punkter). Tar bort onödiga co-linjära punkter från G-kodutmatningen. - + Enable separate optimization of transitions between, and breaks within, each step over path. Möjliggör separat optimering av övergångar mellan, och pauser inom, varje steg över banan. - + Depth offset Förskjutning i djup - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Stega förbi - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Ett step over på 100% r resulterar i att det inte blir någon överlappning mellan två olika cykler. - - + + Sample interval Provtagningsintervall @@ -2172,114 +2140,119 @@ Standard: 3 mm Lodrät - + Thread Tråd - + Orientation Orientering - + Type Typ - + Fit Anpassa - + Major diameter Större diameter - + Minor diameter Mindre diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Godkänns - + Discretization Deflection Diskretisering Avböjning - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. Detta värde används för att dela upp bågar i segment. Mindre värden resulterar i större G-kod. Större värden kan orsaka oönskade segment i den mediala linjebanan. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Avslutande pass Z-offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Slutfräsens offset för den avslutande passagen. Använd ett litet värde som -0,2 mm för att rensa bort "luddig hud" eller andra artefakter. - + After carving, travel again the path to remove artifacts and imperfections Efter snidning, resa igen vägen för att ta bort artefakter och brister - + Finishing pass Avslutande pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimera rörelser - + Algorithm Algoritm @@ -2442,17 +2415,17 @@ Om radien är större än den som själva taggformen stöder, kommer den resulte Tagggenerering - + G-Code G-kod - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Lägg till @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Kopiera från - - - Surface - Yta - - - - Remove - Ta bort - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Uppdatera - - - - All objects will be profiled using the same depth and speed settings - Alla objekt kommer att profileras med samma djup- och hastighetsinställningar - - - - Depths - Djup - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Höjder - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - Det verktyg och dess inställningar som ska användas för denna operation. - - - - Algorithm - Algoritm - Z Depth Correction @@ -4149,17 +4001,17 @@ Standard: 3 mm Redigera - + Drag Slider to Simulate Dra reglaget för att simulera - + Save Project As Spara projekt som - + CAMotics Project (*.camotics) CAMotics-projekt (*.camotics) @@ -4196,17 +4048,17 @@ Standard: 3 mm Spindelvarvtal - + Selected tool is not a drill Valt verktyg är inte en borrmaskin - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Ogiltig skärkantsvinkel %.2f, måste vara >0° och <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Skärkantsvinkel (%.2f) resulterar i negativ verktygsspetslängd @@ -4254,12 +4106,12 @@ Standard: 3 mm isHorizontal(%s) stöds inte - + %s not supported for flipping %s stöds inte för vändning - + Zero working area to process. Check your selection and settings. Noll arbetsyta att bearbeta. Kontrollera ditt val och dina inställningar. @@ -4435,8 +4287,8 @@ Standard: 3 mm - - + + The base toolpath to modify Den grundläggande verktygsvägen för att modifiera @@ -4457,90 +4309,90 @@ Standard: 3 mm Höjd att höja vid hörnrörelse - + Calculate roll-on to toolpath Beräkna roll-on till verktygsbana - + Calculate roll-off from toolpath Beräkna avrullning från verktygsbanan - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Utför dykningar med G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping-metod - + Which feed rate to use for ramping Vilken matningshastighet ska användas för rampning - + Custom feed rate Anpassad matningshastighet - + Should the dressup ignore motion commands above DressupStartDepth Ska dressupen ignorera rörelsekommandon ovanför DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. Det djup där rampförberedelsen är aktiverad. Ovanför detta genereras inga ramper, utan rörelsekommandon skickas igenom som vanligt. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Gör False, för att förhindra att operationen genererar kod - + Edit Redigera - + Base Geometry Basgeometri - + Multiple operations are labeled as Flera operationer betecknas som - + Base Location Basläge - + Heights Höjder - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth kan inte ändras för denna operation. Om det är nödvändigt att ställa in FinalDepth manuellt, välj en annan operation. - + Depths Djup - + Diameters Diametrar - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Återskapa AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation Ingen lämplig verktygskontroller hittades. Avbryter skapandet av operatör - + No tool controller, aborting op creation Ingen verktygsstyrning, avbruten op-skapelse @@ -6630,51 +6482,51 @@ Avbryter skapandet av operatör Håll verktyget nere i vägen - - + + Arc Cirkelbåge - - + + Tangent Tangens - - + + Perpendicular Vinkelrät - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Ledning in/ut - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Det valda objektet är inte en verktygsbana @@ -6844,67 +6696,67 @@ Avbryter skapandet av operatör CAM_DressupRampEntry - + RampMethod1 RampMetod1 - + RampMethod2 RampMetod2 - + RampMethod3 RampMetod3 - + Helix Helix - + Horizontal Feed Rate Horisontell matningshastighet - + Vertical Feed Rate Vertikal matningshastighet - + Ramp Feed Rate Rampmatningshastighet - + Custom Anpassad - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath Det valda objektet är inte en verktygsbana @@ -7580,6 +7432,21 @@ Avbryter skapandet av operatör Mist Dimmigt + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Avbryter skapandet av operatör Form - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Avbryter skapandet av operatör CAM_Camotics - + CAMotics KAMOTIK - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Avbryter skapandet av operatör The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Avbryter skapandet av operatör Ficka + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindel + + + + Forward + Forward + + + + Reverse + Omvänd + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_tr.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_tr.ts index ddfc821e72..649af9ec66 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_tr.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_tr.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Takım Denetleyici Düzenleyicisi - - Controller - Denetleyici - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Mil - - - - Forward - İleri - - - - Reverse - Ters çevir - - - Tool Araç - - - Any modifications only affect this ToolController! - Herhangi bir değişiklik sadece bu Takım Kontrolcüsü'nü etkiler! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Soğutma sıvısı - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Dur - - - - + + + + Direction Yön - + CW Saat Yönü - + CCW Saat Yönünün Tersi - + Round joint Yuvarlak eklem - + Miter joint Gönye birleştirme - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Birleştir: - + TextLabel MetinEtiketi @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Gagalama ile delik delmek - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth Derinlik - + Retract Geri Çekme - + Chip break Chip break - + Dwell Kesinti @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Şekil: - + Time Zaman @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be Takım Kontrolcüsü - + None Hiçbiri - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from 'dan başlayınız - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside İçeride - + Outside Dışarıda - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Yüzde üzerinden adımla @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Devre dışı - + Boundary Shape Sınır Şekli - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Kesim Modu - - + + Climb Tırmanma - - + + Conventional Geleneksel - + Pattern Desen @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag Zikzak - + Spiral Sarmal - + ZigZagOffset ZikzakÖtelemesi - + Line Çizgi - + Grid Izgara - + Triangle Üçgen - + Angle Açı - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Başlangıç Noktasını Kullan - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Prob - + X offset X offset - + Y offset Y offset - + File name File name - + Output Çıktı - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt SondaNoktaları.txt - - + + PLACEHOLDER YER TUTUCU - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Telafiyi Kullan - + Process Perimeter Çevreyi İşle - - + + Vertex Vertex - + End Feature Reference Özellik Referansını Bitiriniz - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Kitlesel merkez kullanın - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End İzin Sonunu Uzatınız - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Tek geçiş - + Multi-pass Çoklu geçiş - + Perpendicular Dik - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Kesme yönünü ters çevir - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Derinlik sapması - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Üzerinden atla - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval Örnekle aralığı @@ -2172,114 +2140,119 @@ Default: 3 mm Dikey - + Thread Vida dişi - + Orientation Yönlendirme - + Type Türü - + Fit Uydurunuz - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Eğim - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation İşlem - + Passes Geçişler/Pasolar - + Discretization Deflection Ayrıştırma Sapması - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algoritma @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Etiket Üretimi - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Ekle @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Şuradan Kopyalayınız - - - Surface - Yüzey - - - - Remove - Kaldır - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Güncelle - - - - All objects will be profiled using the same depth and speed settings - Tüm nesneler aynı derinlik ve sürat ayarları kullanılarak profillendirilecektir - - - - Depths - Derinlik - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Yükseklik - - - - Operation - İşlem - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algoritma - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Düzenle - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Mil Devir Sayısı - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Düzenle - + Base Geometry Tahta geometrisi - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Yükseklik - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Derinlik - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation İşlem - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Yay - - + + Tangent Teğet - - + + Perpendicular Dik - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Temel Giriş/Çıkış - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampaYöntemi1 - + RampMethod2 RampaYöntemi2 - + RampMethod3 RampaYöntemi3 - + Helix Helis - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom Özel - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - İleri + Forward @@ -8758,27 +8625,27 @@ Aborting op creation Şekil - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Boşluk + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Mil + + + + Forward + Forward + + + + Reverse + Ters çevir + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_uk.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_uk.ts index 77cbf6080d..2ad1c123fd 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_uk.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_uk.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i Редактор інструментів - - Controller - Контролер - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - Шпиндель - - - - Forward - Вперед - - - - Reverse - Зворотній напрямок - - - Tool Інструмент - - - Any modifications only affect this ToolController! - Any modifications only affect this ToolController! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul Охолоджувальна рідина - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Величина, на яку інструмент зміщується вбік на кожному циклі деталі, вказана у відсотках від діаметра інструмента. Крок більше 100% призводить до відсутності перекриття між двома різними циклами. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop Стоп - - - - + + + + Direction Напрямок - + CW за годинниковою стрілкою - + CCW проти годинникової стрілки - + Round joint Кругле з'єднання - + Miter joint З'єднання мітерів - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be мм - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: З'єднати: - + TextLabel ТекстовийНадпис @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Переривчасте свердління - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth На глибину - + Retract Відведення - + Chip break Chip break - + Dwell Затримка @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be Форма - + Time Час @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be КонтролерІнструментів - + None Немає - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside Всередині - + Outside Ззовні - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be Вимкнути - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Звичайний - + Pattern Шаблон @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction Режим різання передбачає, що зріз на одній стороні фрези являє собою одержувану деталь, а інша сторона або вже відфрезерована, або буде видалена пізніше. Режим підйому - це коли фреза переміщується в розріз на кожному оберті, в той час як в звичайному режимі обертання фрези і бічний рух інструменту відбуваються в одному напрямку - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag ZigZag - + Spiral Спіраль - + ZigZagOffset ZigZagOffset - + Line Лінія - + Grid Сітка - + Triangle Трикутник - + Angle Кут - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles Величина, на яку інструмент зміщується в бік на кожному циклі деталі, вказана у відсотках від діаметра інструмента. Крок більше 100% призводить до відсутності перекриття між двома різними циклами - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Використовувати початкову точку - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output Вивід - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape Кількість додаткового матеріалу, залишеного цією операцією по відношенню до цільової форми - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Перевірте, чи повинна ця операція профілювання також обробляти отвори в геометрії основи. Знайдені отвори автоматично зміщуються на сторону, протилежну стороні розрізу, і виконуються в протилежному напрямку як периметри. Зверніть увагу, що це не стосується циліндричних отворів, оскільки передбачається, що вони будуть просвердлені - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes Check if this profile operation should also process the outside perimeter of the base geometry shapes - + Use Compensation Використовувати компенсацію - + Process Perimeter Process Perimeter - - + + Vertex Вершина - + End Feature Reference End Feature Reference - + Choose what point to use on the first selected feature Choose what point to use on the first selected feature @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass Центр мас - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature Choose what point to use on the second selected feature - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Багатопрохідний - + Perpendicular Перпендикулярний - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over Крок за кроком - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. Крок більше 100% призводить до відсутності перекриття між двома різними циклами. - - + + Sample interval Sample interval @@ -2172,114 +2140,119 @@ Default: 3 mm По вертикалі - + Thread Thread - + Orientation Орієнтація - + Type Тип - + Fit підходити - + Major diameter Major diameter - + Minor diameter Minor diameter - + Lead in/out Lead in/out - + Pitch Pitch - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add Додати @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From Copy From - - - Surface - Поверхня - - - - Remove - Видалити - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - Оновити - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Depths - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Висоти - - - - Operation - Operation - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - Algorithm - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm Правка - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Частота обертання шпинделя, об/хв - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit Правка - + Base Geometry Базова Геометрія - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Висоти - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Depths - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc Дуга - - + + Tangent Дотичний - - + + Perpendicular Перпендикулярний - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out Lead In/Out - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix Гвинт - + Horizontal Feed Rate Горизонтальна швидкість подачі - + Vertical Feed Rate Вертикальна швидкість подачі - + Ramp Feed Rate Ramp Feed Rate - + Custom Підлаштувати - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - Вперед + Forward @@ -8758,27 +8625,27 @@ Aborting op creation Форма - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation Виріз + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + Spindle + + + + Forward + Forward + + + + Reverse + Зворотній напрямок + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_zh-CN.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_zh-CN.ts index 2d5be2b6b6..a92f63ab98 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_zh-CN.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_zh-CN.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i 刀具控制器编辑器 - - Controller - 控制器 - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - 主轴 - - - - Forward - 正转 - - - - Reverse - 反转 - - - Tool 刀具 - - - Any modifications only affect this ToolController! - 任何修改都只影响当前刀具控制器！ - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul 冷却液 - + Type of adaptive operation 自适应加工类型 - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes 在选定形状的内部或外部切割 - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used 如果大于零，则限制螺旋斜面直径，否则使用工具直径的75% - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. 在清除的区域上快速链接移动期间，刀具的提升量。如果链接刀轨不干净 ，则将刀具提升到净空高度。 - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. 将保持刀具向下链接刀轨的最大长度，与点之间的直接距离比较。如果超过直线距离，将通过将刀具升高到净空高度进行连接。 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. 在加工样式的每个循环中，刀具横向位移的量，以刀具直径的百分比指定。100%的步距导致两个不同循环之间没有重叠。 - + Angle of the helix ramp entry 螺旋坡道入口的角度 - + Angle of the helix entry cone 螺旋入口锥角度 @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop 停止 - - - - + + + + Direction 方向 - + CW 顺时针 - + CCW 逆时针 - + Round joint 平滑 - + Miter joint 斜接 - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: 连接: - + TextLabel 文本标签 @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck 啄钻 - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth 深度 - + Retract 收回 - + Chip break Chip break - + Dwell 驻留 @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be 窗体 - + Time 时间 @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be 工具控制器 - + None 无 - + Feed retract 进给回退 - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from 开始于 - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside 内部 - + Outside 外部 - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. 指定每个螺旋相对于上一个螺旋的偏移距离(按刀具直径的百分比)。超过100%意味着单个切割没有重叠。 - - - + + + Step over percent 步距百分比 @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be 禁用 - + Boundary Shape 边界形状 - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode 切割模式 - - + + Climb 顺铣 - - + + Conventional 逆铣 - + Pattern 模式 @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction 切削模式假设刀具一侧的切口代表产生的零件，而另一侧要么已经被铣削掉，要么稍后将被移除。顺铣是指每次旋转时将刀具移动到切口中，而在逆铣模式中，刀具的旋转和刀具的横向移动方向相同 - + Pattern the tool bit is moved in to clear the material 将刀头切入以清除材料 - + ZigZag 之字形 - + Spiral 螺旋 - + ZigZagOffset 之字形+偏移 - + Line 直线 - + Grid 网格 - + Triangle 三角形 - + Angle 角度 - + Angle in which the pattern is applied 应用样式的角度 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles 在图案的每个循环中，刀具横向位移的量，以刀具直径的百分比指定。100%的步距导致两个不同循环之间没有重叠 - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape 此加工相对于目标形状应保留的材料量 - + Specify if this operation uses a starting point 指定此加工是否使用起点 - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands 如果选中，加工将使用选定基础几何图形的轮廓，并忽略所有孔和孤岛 - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations 选中可跳过先前加工已清除的加工区域 - + Use rest machining Use rest machining - + Use Start Point 使用起点 - + Probe grid points Probe grid points - + X: X: - + Y: Y: - + Probe 探测 - + X offset X offset - + Y offset Y offset - + File name File name - + Output 输出 - + Enter the filename where the probe points should be written 输入应写入探测点的文件名 - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise 执行轮廓铣的方向，顺时针或逆时针 - + The amount of extra material left by this operation in relation to the target shape 此加工相对于目标形状保留的额外材料余量 - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point 选择此加工是否应使用起点 - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled 选择此轮廓加工是否也应处理基础几何图形中的孔。发现的孔会自动在相反的切割面上偏移，并作为边缘在相反的方向上执行。请注意，这不包括圆柱形孔，假设它们将被按钻孔加工 - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes 选择此轮廓加工是否也应处理基础几何形状的外边缘 - + Use Compensation 使用补偿 - + Process Perimeter 加工外围 - - + + Vertex 顶点 - + End Feature Reference 结束特征引用 - + Choose what point to use on the first selected feature 选择要在第一个选定特征上使用的点 @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass 质心 - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature 选择要在第二个选定特征上使用的点 - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens 正值延长刀轨的起点，负值缩短刀轨的起点 - + Extend Path End 扩展刀轨终点 - + Positive extends the end of the path, negative shortens 正值延伸刀轨的终点，负值缩短刀轨的终点 - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass 一次成型 - + Multi-pass 多次递进 - + Perpendicular 垂直 - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction 反转切割方向 - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y 边界框额外偏移X，Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. 创建的Dropcutter线与该轴平行。 - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. 设置采样分辨率。较小的值会迅速增加处理时间。 - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. 启用线性刀轨（共线点）的优化。从G代码输出中删除不必要的共线点。 - + Enable separate optimization of transitions between, and breaks within, each step over path. 实现刀轨上每一步之间的跳转和步距的单独优化。 - + Depth offset 深度偏移 - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over 步距 - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. 100%的步距导致两个不同循环之间没有重叠。 - - + + Sample interval 采样间隔 @@ -2172,114 +2140,119 @@ Default: 3 mm 垂直 - + Thread 螺纹铣 - + Orientation 方向 - + Type 类型 - + Fit 适应 - + Major diameter 大径 - + Minor diameter 小径 - + Lead in/out Lead in/out - + Pitch 螺距 - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI(螺纹数/英寸) - + Operation 加工 - + Passes Passes - + Discretization Deflection 离散化偏差 - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm 算法 @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul 标记生成 - + G-Code G-代码 - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add 添加 @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From 复制自 - - - Surface - 面 - - - - Remove - 删除 - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - 更新 - - - - All objects will be profiled using the same depth and speed settings - 将使用相同的深度和速度设置对所有对象进行分析 - - - - Depths - 深度 - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - 高度 - - - - Operation - 加工 - - - - The tool and its settings to be used for this operation. - 用于此操作的刀具及其设置。 - - - - Algorithm - 算法 - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm 编辑 - + Drag Slider to Simulate 拖动滑块进行模拟 - + Save Project As 项目另存为 - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm 主轴转速(转/分) - + Selected tool is not a drill 所选刀具不是钻头 - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° 无效的切削刃角度 %.2f, must be >0° 和 <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length 切削刃角度 (%.2f) 导致刀尖长度为负 @@ -4254,12 +4106,12 @@ Default: 3 mm 不支持isHorizontal(%s) - + %s not supported for flipping %s不支持翻转 - + Zero working area to process. Check your selection and settings. 零工作区加工。检查您的选择和设置。 @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify The base toolpath to modify @@ -4457,90 +4309,90 @@ Default: 3 mm 转角动作时要升高的高度 - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 使用 G0 执行骤降 - + Angle of ramp Angle of ramp - + Ramping Method 斜下刀方法 - + Which feed rate to use for ramping 用于斜下刀的进给速率 - + Custom feed rate 自定义进给速度 - + Should the dressup ignore motion commands above DressupStartDepth 修整是否忽略修整起始深度上方的运动命令 - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. 启用斜坡修饰的深度。 在此斜坡上方不会生成，但会按原样传递运动命令。 @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this 设为False，以防止加工生成代码 - + Edit 编辑 - + Base Geometry 基本几何图形 - + Multiple operations are labeled as 多个加工标记为 - + Base Location 基准位置 - + Heights 高度 - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. 无法为此加工修改FinalDepth。 如果需要手动设置FinalDepth，请选择其他加工。 - + Depths 深度 - + Diameters 直径 - + AreaOp Operation AreaOp加工 - + Operation 加工 - + Uncreate AreaOp Operation 取消创建AreaOp加工 - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation 找不到合适的刀具控制器。 正在中止加工创建 - + No tool controller, aborting op creation 没有刀具控制器，正在中止加工作创建 @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc 圆弧 - - + + Tangent 相切 - - + + Perpendicular 垂直 - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out 驶入/出 - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix 螺旋体 - + Horizontal Feed Rate 水平进给速度 - + Vertical Feed Rate 垂直进给速度 - + Ramp Feed Rate 斜坡进给速率 - + Custom 自定义 - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist 喷雾 + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8652,7 +8519,7 @@ Aborting op creation Forward - 正转 + Forward @@ -8758,27 +8625,27 @@ Aborting op creation 形状 - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation 凹坑 + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + 主轴 + + + + Forward + Forward + + + + Reverse + 反转 + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/CAM/Gui/Resources/translations/CAM_zh-TW.ts b/src/Mod/CAM/Gui/Resources/translations/CAM_zh-TW.ts index 3e7833f5c6..7313e1548b 100644 --- a/src/Mod/CAM/Gui/Resources/translations/CAM_zh-TW.ts +++ b/src/Mod/CAM/Gui/Resources/translations/CAM_zh-TW.ts @@ -309,61 +309,10 @@ For stock from the base object's bounding box it means the extra material i 刀具控制器編輯器 - - Controller - 控制器 - - - - Controller Name / Tool Number - Controller Name / Tool Number - - - - Horizontal feed - Horizontal feed - - - - Vertical feed - Vertical feed - - - - Horizontal rapid - Horizontal rapid - - - - Vertical rapid - Vertical rapid - - - - Spindle - 主軸 - - - - Forward - 正轉 - - - - Reverse - 反向 - - - Tool 工具 - - - Any modifications only affect this ToolController! - 任何修改僅影響此刀具控制器! - Tool Editor @@ -957,7 +906,7 @@ Reset deletes all current items from the list and fills the list with all circul - + Tool Controller @@ -971,12 +920,12 @@ Reset deletes all current items from the list and fills the list with all circul 冷卻劑 - + Type of adaptive operation Type of adaptive operation - + Influences calculation performance vs stability and accuracy. Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. @@ -985,37 +934,37 @@ Larger values (further to the right) will calculate faster; smaller values (furt Larger values (further to the right) will calculate faster; smaller values (further to the left) will result in more accurate toolpaths. - + Cut inside or outside of the selected shapes Cut inside or outside of the selected shapes - + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used - + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. 在快速連接移動到已清理區域的過程中，將工具抬起多少。如果連接路徑不暢通，則工具將升高至間隙高度。 - + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. 保持工具向下連結路徑的最大長度與點之間的直接距離相比。如果超過，將透過將工具升高到間隙高度來完成連結。 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Angle of the helix ramp entry Angle of the helix ramp entry - + Angle of the helix entry cone Angle of the helix entry cone @@ -1033,73 +982,92 @@ Larger values (further to the right) will calculate faster; smaller values (furt Tool controller - + + + + + + + + + + + + + + + + Edit Tool Controller + Edit Tool Controller + + + Accuracy vs performance Accuracy vs performance - + Force clearing inside-out Force clearing inside-out - + Finishing profile Finishing profile - + How much material to leave in the XY-plane (i.e. for finishing operation) How much material to leave in the XY-plane (i.e. for finishing operation) - + XY stock to leave XY stock to leave - + Helix ramp angle Helix ramp angle - - + + Use outline Use outline - + Operation type Operation type - + Keep tool down ratio Keep tool down ratio - + Helix cone angle Helix cone angle - + Lift distance Lift distance - + Cut region Cut region - + Helix max diameter Helix max diameter - + After calculating toolpaths, the default cut order is by depth- all regions at a given stepdown are cleared before moving to the next stepdown. This option changes that behavior to cut each discrete area to its full depth before moving on to the next. @@ -1108,57 +1076,57 @@ This option changes that behavior to cut each discrete area to its full depth be This option changes that behavior to cut each discrete area to its full depth before moving on to the next. - + Order cuts by region Order cuts by region - + Z stock to leave Z stock to leave - + How much material to leave along the Z axis (i.e. for finishing operation) How much material to leave along the Z axis (i.e. for finishing operation) - + Stop 停止 - - - - + + + + Direction 方向 - + CW 順時針 - + CCW 逆時針 - + Round joint Round joint - + Miter joint Miter joint - - + + @@ -1172,22 +1140,22 @@ This option changes that behavior to cut each discrete area to its full depth be mm - + Width of chamfer cut Width of chamfer cut - + Extra depth of tool immersion Extra depth of tool immersion - + Join: Join: - + TextLabel 文字標籤 @@ -1202,43 +1170,43 @@ This option changes that behavior to cut each discrete area to its full depth be Keep tool down - + Peck Peck - + Extend depth Extend depth - + Drill tip Drill tip - + 2x drill tip 2x drill tip - + Depth 深度 - + Retract Retract - + Chip break Chip break - + Dwell Dwell @@ -1249,7 +1217,7 @@ This option changes that behavior to cut each discrete area to its full depth be 格式 - + Time Time @@ -1276,61 +1244,61 @@ This option changes that behavior to cut each discrete area to its full depth be ToolController - + None 無 - + Feed retract Feed retract - + G85: Retract from the hole at the given feedrate instead of rapid move G85: Retract from the hole at the given feedrate instead of rapid move - + Start from Start from - + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center - + Inside 裡面 - + Outside 外面 - + The direction for the helix, clockwise or counterclockwise The direction for the helix, clockwise or counterclockwise - - + + Extra offset Extra offset - + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. - - - + + + Step over percent Step over percent @@ -1400,12 +1368,12 @@ This option changes that behavior to cut each discrete area to its full depth be 停用 - + Boundary Shape Boundary Shape - + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. @@ -1414,24 +1382,24 @@ The latter can be used to face of the entire stock area to ensure uniform height The latter can be used to face of the entire stock area to ensure uniform heights for the following operations. - + Cut Mode Cut Mode - - + + Climb Climb - - + + Conventional Conventional - + Pattern 圖樣 @@ -1473,266 +1441,266 @@ The latter can be used to face of the entire stock area to ensure uniform height Coolant mode - + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction - + Pattern the tool bit is moved in to clear the material Pattern the tool bit is moved in to clear the material - + ZigZag 之字形 - + Spiral 螺旋 - + ZigZagOffset ZigZagOffset - + Line 線 - + Grid 格線 - + Triangle 三角形 - + Angle 角度 - + Angle in which the pattern is applied Angle in which the pattern is applied - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles - + Material allowance Material allowance - + The amount of material that should be left by this operation in relation to the target shape The amount of material that should be left by this operation in relation to the target shape - + Specify if this operation uses a starting point Specify if this operation uses a starting point - - + + Use start point Use start point - + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands If selected the operation uses the outline of the selected base geometry and ignores all holes and islands - + Clear edges Clear edges - + Min travel Min travel - + Check to skip machining regions that have already been cleared by previous operations Check to skip machining regions that have already been cleared by previous operations - + Use rest machining Use rest machining - + Use Start Point Use Start Point - + Probe grid points Probe grid points - + X: X： - + Y: Y： - + Probe Probe - + X offset X offset - + Y offset Y offset - + File name File name - + Output 輸出 - + Enter the filename where the probe points should be written Enter the filename where the probe points should be written - + ProbePoints.txt ProbePoints.txt - - + + PLACEHOLDER PLACEHOLDER - - + + The direction in which the profile is performed, clockwise or counterclockwise The direction in which the profile is performed, clockwise or counterclockwise - + The amount of extra material left by this operation in relation to the target shape The amount of extra material left by this operation in relation to the target shape - + Cut side Cut side - + Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). Specify if the profile should be performed inside or outside the base geometry features. This only matters if 'Use compensation' is checked (the default). - + Number of passes Number of passes - + The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. The number of passes to do. If more than one, requires a non-zero value for 'Pass stepover'. - + Pass stepover Pass stepover - + If doing multiple passes, the extra offset of each additional pass If doing multiple passes, the extra offset of each additional pass - + Check if this operation should use a starting point Check if this operation should use a starting point - + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled 檢查此輪廓操作是否也應處理基礎幾何體中的孔。找到的孔會自動在相反的切割側偏移，並在與週長相反的方向上執行。請注意，這不包括圓柱形孔，假設它們將被鑽孔 - + Process holes Process holes - + If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. If checked, the profile operation is offset by the tool radius. The offset direction is determined by 'Cut side'. - + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values. - + Process circles Process circles - + Check if this profile operation should also process the outside perimeter of the base geometry shapes 檢查此輪廓操作是否還應處理基本幾何形狀的外周長 - + Use Compensation Use Compensation - + Process Perimeter Process Perimeter - - + + Vertex Vertex - + End Feature Reference 結束結徵參考 - + Choose what point to use on the first selected feature 選擇在第一個選定特徵上使用哪個點 @@ -1742,299 +1710,299 @@ The latter can be used to face of the entire stock area to ensure uniform height The tool and its settings to be used for this operation - + Start feature reference Start feature reference - - + + Center of mass 質心 - - + + Center of bounding box Center of bounding box - - + + Lowest point Lowest point - - + + Highest point Highest point - + Long edge Long edge - + Short edge Short edge - + Choose what point to use on the second selected feature 選擇在第二個選定特徵上使用哪個點 - + No base geometry Selected No base geometry Selected - + No base geometry selected No base geometry selected - + Currently using custom point inputs in the property view of the data tab Currently using custom point inputs in the property view of the data tab - + Currently using custom point inputs available in the property view of the data tab Currently using custom point inputs available in the property view of the data tab - + Extend path start Extend path start - - - + + + Layer mode Layer mode - + Path orientation Path orientation - + Choose the path orientation with regard to the features selected Choose the path orientation with regard to the features selected - + Start to end Start to end - + Positive extends the beginning of the path, negative shortens Positive extends the beginning of the path, negative shortens - + Extend Path End Extend Path End - + Positive extends the end of the path, negative shortens Positive extends the end of the path, negative shortens - - - + + + Complete the operation in a single pass at depth, or multiple passes to final depth Complete the operation in a single pass at depth, or multiple passes to final depth - + Single-pass Single-pass - + Multi-pass Multi-pass - + Perpendicular 垂直 - + Enable to reverse the cut direction of the slot path Enable to reverse the cut direction of the slot path - + Reverse cut direction Reverse cut direction - - + + Bounding box Bounding box - - + + Select the overall boundary for the operation Select the overall boundary for the operation - + Scan type Scan type - + Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. Planar: flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - + + Cut pattern Cut pattern - - + + Set the geometric clearing pattern to use for the operation Set the geometric clearing pattern to use for the operation - + Profile edges Profile edges - + Profile the edges of the selection Profile the edges of the selection - + Avoid last X faces Avoid last X faces - + Avoid cutting the last 'n' faces in the base geometry list of selected faces Avoid cutting the last 'n' faces in the base geometry list of selected faces - + Bounding box extra offset X, Y Bounding box extra offset X, Y - + Additional offset to the selected bounding box along the X axis Additional offset to the selected bounding box along the X axis - + Additional offset to the selected bounding box along the Y axis Additional offset to the selected bounding box along the Y axis - + Drop cutter direction Drop cutter direction - + Dropcutter lines are created parallel to this axis. Dropcutter lines are created parallel to this axis. - - + + Set the Z-axis depth offset from the target surface Set the Z-axis depth offset from the target surface - + Stepover Stepover - + Set to true if specifying a start point Set to true if specifying a start point - - + + Optimize linear paths Optimize linear paths - + If true, the cutter will remain inside the boundaries of the model or selected faces If true, the cutter will remain inside the boundaries of the model or selected faces - + Boundary enforcement Boundary enforcement - + Optimize stepover transitions Optimize stepover transitions - - + + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. - - + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. - + Enable separate optimization of transitions between, and breaks within, each step over path. Enable separate optimization of transitions between, and breaks within, each step over path. - + Depth offset Depth offset - + Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). Select the algorithm to use: 'OCL Dropcutter*', or 'Experimental' (not OCL based). - + Boundary adjustment Boundary adjustment - + Step over 跨越 - - + + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -2043,8 +2011,8 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - - + + Sample interval 採樣間隔 @@ -2172,114 +2140,119 @@ Default: 3 mm 垂直 - + Thread Thread - + Orientation 定位 - + Type 類型 - + Fit Fit - + Major diameter 大徑 - + Minor diameter 小徑 - + Lead in/out Lead in/out - + Pitch 螺距 - + + The tool and its settings to be used for this operation. + The tool and its settings to be used for this operation. + + + TPI TPI - + Operation Operation - + Passes Passes - + Discretization Deflection Discretization Deflection - + This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. This value is used in discretizing arcs into segments. Smaller values will result in larger G-code. Larger values may cause unwanted segments in the medial line path. - + Filter colinear lines Filter colinear lines - + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 - + Finishing pass Z offset Finishing pass Z offset - + Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. Endmill offset for the finishing pass run. Use small value like -0.2 mm to help clean "fuzzy skin" or other artefacts. - + After carving, travel again the path to remove artifacts and imperfections After carving, travel again the path to remove artifacts and imperfections - + Finishing pass Finishing pass - + Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. Optimize path to avoid raising endmill when moving to adjacent edges. May result in sub-millimeter inaccuracies. - + Optimize movements Optimize movements - + Algorithm Algorithm @@ -2442,17 +2415,17 @@ If the radius is bigger than that which the tag shape itself supports, the resul Tag Generation - + G-Code G-Code - + Start at vertex Start at vertex - + Specify the vertex number of the underlying shape string at which engraving should start Specify the vertex number of the underlying shape string at which engraving should start @@ -3225,7 +3198,6 @@ Should multiple tools or tool shapes with the same name exist in different direc - Add 新增 @@ -3265,126 +3237,6 @@ Should multiple tools or tool shapes with the same name exist in different direc Copy From 拷貝自 - - - Surface - 面 - - - - Remove - 移除 - - - - Base geometry - Base geometry - - - - Drag to reorder, then update - Drag to reorder, then update - - - - Add item selected in window - Add item selected in window - - - - Remove item selected in list, then update - Remove item selected in list, then update - - - - Update the path with the removed and reordered items - Update the path with the removed and reordered items - - - - Update - 更新 - - - - All objects will be profiled using the same depth and speed settings - All objects will be profiled using the same depth and speed settings - - - - Depths - Depths - - - - Start depth - Start depth - - - - Final depth - Final depth - - - - Step down - Step down - - - - Finish step down - Finish step down - - - - Safe height - Safe height - - - - Clearance height - Clearance height - - - - Tool controller - Tool controller - - - - Coolant mode - Coolant mode - - - - OCL dropcutter - OCL dropcutter - - - - OCL waterline - OCL waterline - - - - Heights - Heights - - - - Operation - 作業 - - - - The tool and its settings to be used for this operation. - The tool and its settings to be used for this operation. - - - - Algorithm - 演算法 - Z Depth Correction @@ -4149,17 +4001,17 @@ Default: 3 mm 編輯 - + Drag Slider to Simulate Drag Slider to Simulate - + Save Project As Save Project As - + CAMotics Project (*.camotics) CAMotics Project (*.camotics) @@ -4196,17 +4048,17 @@ Default: 3 mm Spindle RPM - + Selected tool is not a drill Selected tool is not a drill - + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - + Cutting Edge Angle (%.2f) results in negative tool tip length Cutting Edge Angle (%.2f) results in negative tool tip length @@ -4254,12 +4106,12 @@ Default: 3 mm isHorizontal(%s) not supported - + %s not supported for flipping %s not supported for flipping - + Zero working area to process. Check your selection and settings. Zero working area to process. Check your selection and settings. @@ -4435,8 +4287,8 @@ Default: 3 mm - - + + The base toolpath to modify 要修改的基礎刀具路徑 @@ -4457,90 +4309,90 @@ Default: 3 mm Height to raise during corner action - + Calculate roll-on to toolpath Calculate roll-on to toolpath - + Calculate roll-off from toolpath Calculate roll-off from toolpath - + Keep the tool down in toolpath Keep the tool down in toolpath - - + + Length or radius of the approach Length or radius of the approach - + Length or radius of the exit Length or radius of the exit - - + + The style of motion into the toolpath The style of motion into the toolpath - - + + The style of motion out of the toolpath The style of motion out of the toolpath - + Extends lead in distance Extends lead in distance - + Extends lead out distance Extends lead out distance - + Apply Lead in/out to layers within an operation Apply Lead in/out to layers within an operation - + Perform plunges with G0 Perform plunges with G0 - + Angle of ramp Angle of ramp - + Ramping Method Ramping Method - + Which feed rate to use for ramping Which feed rate to use for ramping - + Custom feed rate Custom feed rate - + Should the dressup ignore motion commands above DressupStartDepth Should the dressup ignore motion commands above DressupStartDepth - + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. @@ -6345,81 +6197,81 @@ Use property KeepToolDown to change this Make False, to prevent operation from generating code - + Edit 編輯 - + Base Geometry Base Geometry - + Multiple operations are labeled as Multiple operations are labeled as - + Base Location Base Location - + Heights Heights - + FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. FinalDepth cannot be modified for this operation. If it is necessary to set the FinalDepth manually please select a different operation. - + Depths Depths - + Diameters Diameters - + AreaOp Operation AreaOp Operation - + Operation Operation - + Uncreate AreaOp Operation Uncreate AreaOp Operation - + Start Point Selection Start Point Selection - + Selects the start point Selects the start point - + No suitable tool controller found. Aborting op creation No suitable tool controller found. Aborting op creation - + No tool controller, aborting op creation No tool controller, aborting op creation @@ -6630,51 +6482,51 @@ Aborting op creation Keep the tool down in the path - - + + Arc 弧 - - + + Tangent 切線 - - + + Perpendicular 垂直 - - + + Length/radius positive not Null Length/radius positive not Null - + Lead In/Out 引入/出 - + Creates a cutter radius compensation G41/G42 entry dressup object from a selected path Creates a cutter radius compensation G41/G42 entry dressup object from a selected path - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -6844,67 +6696,67 @@ Aborting op creation CAM_DressupRampEntry - + RampMethod1 RampMethod1 - + RampMethod2 RampMethod2 - + RampMethod3 RampMethod3 - + Helix 螺旋 - + Horizontal Feed Rate Horizontal Feed Rate - + Vertical Feed Rate Vertical Feed Rate - + Ramp Feed Rate Ramp Feed Rate - + Custom 自訂 - + Ramp Entry Ramp Entry - + Creates a ramp entry dress-up object from a selected toolpath Creates a ramp entry dress-up object from a selected toolpath - + Select one toolpath object Select one toolpath object - + Select a Profile object Select a Profile object - + The selected object is not a toolpath The selected object is not a toolpath @@ -7580,6 +7432,21 @@ Aborting op creation Mist Mist + + + Copy {0}… + Copy {0}… + + + + New tool controller… + New tool controller… + + + + This tool controller is used by {0} other operations. + This tool controller is used by {0} other operations. + CAM @@ -8758,27 +8625,27 @@ Aborting op creation 造型 - + Tool Selector Tool Selector - + Open Library Editor Open Library Editor - + Add to Job Add to Job - + No Job Found No Job Found - + Please create a Job first. Please create a Job first. @@ -8799,12 +8666,12 @@ Aborting op creation CAM_Camotics - + CAMotics CAMotics - + Simulates using CAMotics Simulates using CAMotics @@ -9093,28 +8960,15 @@ Aborting op creation The selected asset path is not writable. - - CAM_ToolBitDock - - - Toolbit Dock - Toolbit Dock - - - - Toggles the toolbit dock - Toggles the toolbit dock - - CAM_ToolBitLibraryOpen - + Toolbit Library Editor Toolbit Library Editor - + Opens an editor to manage toolbit libraries Opens an editor to manage toolbit libraries @@ -9404,4 +9258,60 @@ Aborting op creation 凹陷 + + Frame + + + Controller Name / Tool Number + Controller Name / Tool Number + + + + Horizontal feed + Horizontal feed + + + + Vertical feed + Vertical feed + + + + Horizontal rapid + Horizontal rapid + + + + Vertical rapid + Vertical rapid + + + + Spindle + 主軸 + + + + Forward + Forward + + + + Reverse + 反向 + + + + CAM_ToolBitSelection + + + Add toolbit… + Add toolbit… + + + + Opens the toolbit selection dialog + Opens the toolbit selection dialog + + diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 44a3fddd28..3de95ae5ba 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -1470,16 +1470,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list - - - If checked, instructions are displayed in the Report view when using Draft commands - - - - - Show prompts in the Report view - - If checked, base objects, instead of created copies, are selected after copying @@ -1578,6 +1568,16 @@ accidentally and modifying the entered value. Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + + + + + Show prompts in the Report View + + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1770,6 +1770,12 @@ pattern definitions to be added to the standard patterns Dimension line overshoot + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + + Texts @@ -1805,12 +1811,6 @@ pattern definitions to be added to the standard patterns Annotations - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - - Font name @@ -2511,11 +2511,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - - Grid @@ -2785,16 +2780,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius - - - If checked, the Draft snap toolbar will only be visible during commands - - - - - Show the Snap widget in the Draft Workbench - - E @@ -2925,19 +2910,34 @@ if they match the X, Y or Z axis of the global coordinate system UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + + + + + Only show the Draft Snap toolbar during commands + + - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3537,44 +3537,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. - + Wrong input: object {} not in document. - + Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. - + image is Null - + filename does not exist on the system or in the resource file - + unable to load texture - + Does not have 'ViewObject.RootNode'. @@ -3948,12 +3948,12 @@ or try saving to a lower DWG version. - + Create Arc From 3 Points - + @@ -3961,13 +3961,13 @@ or try saving to a lower DWG version. - + %1 pick second point - + %1 pick third point @@ -4476,7 +4476,7 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve + Cubic Bézier Curve @@ -5093,38 +5093,38 @@ The final angle will be the base angle plus this amount. - - + + Points: - + Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. - + Placement: - + Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. - + Cannot generate shape: @@ -7884,12 +7884,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools - + Tools to create various types of circular arcs @@ -8343,7 +8343,7 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_be.qm b/src/Mod/Draft/Resources/translations/Draft_be.qm index 0119f4bd72..9d45194714 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_be.qm and b/src/Mod/Draft/Resources/translations/Draft_be.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_be.ts b/src/Mod/Draft/Resources/translations/Draft_be.ts index c0460667e3..57b4ee52aa 100644 --- a/src/Mod/Draft/Resources/translations/Draft_be.ts +++ b/src/Mod/Draft/Resources/translations/Draft_be.ts @@ -37,7 +37,7 @@ Layers Manager - Layers Manager + Кіраўнік пластоў @@ -47,7 +47,7 @@ Toggle Visibility - Toggle Visibility + Пераключыць бачнасць @@ -171,17 +171,18 @@ Style Name - Style Name + Назва стылю The name of the style. Existing style names can be edited. - The name of the style. Existing style names can be edited. + Назва стылю. +Існуючыя назвы стыляў можна змяніць. Add new… - Add new… + Дадаць новы… @@ -192,12 +193,12 @@ The type of the starting arrows or markers to use for dimensions and labels - The type of the starting arrows or markers to use for dimensions and labels + Тып пачатковых стрэлак ці маркераў, якія варта ўжываць для вымярэнняў і метак Start arrow type - Start arrow type + Тып пачатковай стрэлкі @@ -209,34 +210,34 @@ The size of the starting arrows or markers in system units - The size of the starting arrows or markers in system units + Памер пачатковых стрэлак ці маркераў у сістэмных адзінках вымярэння Start arrow size - Start arrow size + Памер пачатковай стрэлкі The type of the ending arrows or markers to use for dimensions and labels - The type of the ending arrows or markers to use for dimensions and labels + Тып канцавых стрэлак ці маркераў, якія варта ўжываць для вымярэнняў і метак End arrow type - End arrow type + Тып канцавой стрэлкі The size of the ending arrows or markers in system units - The size of the ending arrows or markers in system units + Памер канцавых стрэлак ці маркераў у сістэмных адзінках вымярэння End arrow size - End arrow size + Памер канцавой стрэлкі @@ -268,7 +269,7 @@ Dimension Details - Dimension Details + Звесткі пра вымярэнне @@ -299,13 +300,13 @@ Lines and Arrows - Lines and Arrows + Лініі і стрэлкі Displays the dimension line - Displays the dimension line + Адлюстроўвае лінію вымярэння @@ -350,7 +351,7 @@ Shows the unit next to the dimension value - Shows the unit next to the dimension value + Паказвае адзінку вымярэння побач са значэннем вымярэння @@ -374,13 +375,13 @@ Circular Array - Circular Array + Кругавы масіў Distance from one layer of objects to the next layer of objects - Distance from one layer of objects to the next layer of objects + Адлегласць ад аднаго пласта аб'ектаў да наступнага пласта аб'ектаў @@ -404,22 +405,22 @@ It cannot be zero. The number of symmetry lines in the circular array - The number of symmetry lines in the circular array + Колькасць ліній сіметрыі ў кругавым масіве Center of Rotation - Center of Rotation + Цэнтр вярчэння Resets the coordinates of the center of rotation - Resets the coordinates of the center of rotation + Скідвае каардынаты цэнтру вярчэння Reset Point - Reset Point + Скінуць кропку @@ -431,13 +432,13 @@ It cannot be zero. Number of concentric circles to create, including a copy of the original object. It must be at least 2. - Number of concentric circles to create, including a copy of the original object. -It must be at least 2. + Колькасць канцентрычных акружнасцяў, якія ствараюцца, разам з копіяй зыходнага аб'екта. +Іх павінна быць не менш чым 2. Number of concentric circles - Number of concentric circles + Колькасць канцентрычных акружнасцяў @@ -541,82 +542,82 @@ Negative values will result in copies produced in the negative direction. Orthogonal Array - Orthogonal Array + Артаганальны масіў Toggles between orthogonal and linear mode - Toggles between orthogonal and linear mode + Пераключэнне паміж артаганальным і лінейным рэжымамі Switch to Linear Mode - Switch to Linear Mode + Пераключыць у лінейны рэжым X axis - X axis + Вось X Y axis - Y axis + Вось Y Z axis - Z axis + Вось Z Number of Elements - Number of Elements + Колькасць элементаў Currently selected axis - Currently selected axis + Абраная ў бягучы час вось Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the X-direction. -Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Адлегласць паміж элементамі ў напрамку X. +Звычайна патрабуецца толькі значэнне X; два іншых значэнні могуць даць дадатковы зрух у адпаведных напрамках. +Адмоўныя значэнні прывядуць да стварэння копій у адмоўным напрамку. X Intervals - X Intervals + Адлегласць у напрамку X Resets the distances - Resets the distances + Скідвае адлегласці Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Y-direction. -Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Адлегласць паміж элементамі ў напрамку Y. +Звычайна патрабуецца толькі значэнне Y; два іншых значэнні могуць даць дадатковы зрух у адпаведных напрамках. +Адмоўныя значэнні прывядуць да стварэння копій у адмоўным напрамку. Y Intervals - Y Intervals + Адлегласць у напрамку Y Z Intervals - Z Intervals + Адлегласць у напрамку Z @@ -653,7 +654,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Polar Array - Polar Array + Палярная сетка @@ -693,17 +694,17 @@ Change the direction of the axis itself in the property editor. Center of Rotation - Center of Rotation + Цэнтр вярчэння Resets the coordinates of the center of rotation - Resets the coordinates of the center of rotation + Скідвае каардынаты цэнтру вярчэння Reset Point - Reset Point + Скінуць кропку @@ -794,17 +795,17 @@ Uncheck to use working plane coordinate system Enter coordinates or pick a point with the mouse - Enter coordinates or pick a point with the mouse + Увядзіце каардынаты ці выбраць кропку мышшу Resets the picked point - Resets the picked point + Скідае выбраную кропку Reset Point - Reset Point + Скінуць кропку @@ -852,32 +853,33 @@ Uncheck to use working plane coordinate system Working Plane Setup - Working Plane Setup + Налады працоўнай плоскасці Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. - Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. + Абірае адзін з варыянтаў ніжэй. +Альбо ўсталяваць працоўную плоскасць, калі выбраць тры вяршыні, адну ці больш фігур, або прамежкавы варыянт рабочай плоскасці, а затым пацвердзіць гэтае з дапамогай пстрычкі мышы ў трохмерным прадстаўленні. Sets the working plane to the XY-plane (ground plane) - Sets the working plane to the XY-plane (ground plane) + Задае працоўную плоскасць да плоскасці XY (гарызантальная плоскасць) Sets the working plane to the XZ-plane (front plane) - Sets the working plane to the XZ-plane (front plane) + Задае працоўную плоскасць да плоскасці XZ (пярэдняя плоскасць) Sets the working plane to the YZ-plane (side plane) - Sets the working plane to the YZ-plane (side plane) + Задае працоўную плоскасць да плоскасці YZ (бакавая плоскасць) Align to View - Align to View + Выраўнаваць да выгляду @@ -922,8 +924,7 @@ of the buttons above Centers the working plane on the current view when pressing one of the buttons above - Centers the working plane on the current view when pressing one -of the buttons above + Цэнтруе працоўную вобласць на бягучым выглядзе пры націску адной з кнопак вышэй @@ -942,7 +943,7 @@ will be moved to the center of the view. Move Working Plane - Move Working Plane + Рухаць працоўную плоскасць @@ -992,7 +993,7 @@ will be moved to the center of the view. Center View - Center View + Цэнтраваць выгляд @@ -1013,7 +1014,7 @@ will be moved to the center of the view. The number of squares in the X- and Y-direction of the grid - The number of squares in the X- and Y-direction of the grid + Колькасць квадратаў у напрамку X і Y сеткі @@ -1226,7 +1227,7 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. Start arrow type - Start arrow type + Тып пачатковай стрэлкі @@ -1261,17 +1262,17 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. Start arrow size - Start arrow size + Памер пачатковай стрэлкі End arrow type - End arrow type + Тып канцавой стрэлкі End arrow size - End arrow size + Памер канцавой стрэлкі @@ -1331,27 +1332,27 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. Style Settings - Style Settings + Налады стылю Saves the current style as a preset - Saves the current style as a preset + Захоўвае бягучы стыль як набор стыляў Shape Appearance - Shape Appearance + Знешні выгляд фігуры Lines and Arrows - Lines and Arrows + Лініі і стрэлкі Adds a unit symbol to dimension texts - Adds a unit symbol to dimension texts + Дадае знак адзінкі вымярэння да тэкстаў вымярэння @@ -1428,16 +1429,16 @@ for linear dimensions. Align to face - Align to face + Выраўнаваць да грані Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. - Aligns the pattern with the base object. -Otherwise, the pattern aligns with the global coordinate system. -This setting modifies the Translate property. + Выраўноўвае шаблон па асноўным аб'екце. +У адваротным выпадку, шаблон выраўноўваецца па глабальнай сістэме каардынат. +Змяняе ўласцівасць 'Перанос' (Translate). @@ -1509,16 +1510,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Уключыць суполкі ў спіс пластоў - - - If checked, instructions are displayed in the Report view when using Draft commands - Калі птушка, інструкцыі адлюстроўваюцца ў праглядзе справаздачы пры выкарыстанні каманд Чарнавіка - - - - Show prompts in the Report view - Паказаць падказкі ў праглядзе справаздачы - If checked, base objects, instead of created copies, are selected after copying @@ -1615,12 +1606,22 @@ accidentally and modifying the entered value. Show working plane orientation - Show working plane orientation + Паказвае арыентацыю працоўнай плоскасці Command Options - Command Options + Налады каманды + + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View @@ -1642,7 +1643,7 @@ This allows indicating a direction and then type a distance. Maximum number of editable objects - Maximum number of editable objects + Найбольшая колькасць аб'ектаў, якія змяняюцца @@ -1672,7 +1673,7 @@ This allows indicating a direction and then type a distance. SVG Patterns - SVG Patterns + Шаблоны SVG @@ -1698,7 +1699,7 @@ pattern definitions to be added to the standard patterns Drawing View Line Definitions - Drawing View Line Definitions + Вызначэнне лініі ў выглядзе чарцяжа @@ -1747,17 +1748,17 @@ pattern definitions to be added to the standard patterns Lines and Arrows - Lines and Arrows + Лініі і стрэлкі Start arrow type - Start arrow type + Тып пачатковай стрэлкі The default symbol displayed at the start of dimension lines - The default symbol displayed at the start of dimension lines + Першапачатковы знак, які адлюстроўваецца на пачатках ліній вымярэння @@ -1768,32 +1769,32 @@ pattern definitions to be added to the standard patterns Start arrow size - Start arrow size + Памер пачатковай стрэлкі The default starting arrow size - The default starting arrow size + Першапачатковы пачатковы памер стрэлкі End arrow type - End arrow type + Тып канцавой стрэлкі The default symbol displayed at the end of dimension lines - The default symbol displayed at the end of dimension lines + Першапачатковы знак, які адлюстроўваецца на канцах ліній вымярэння End arrow size - End arrow size + Памер канцавой стрэлкі The default ending arrow size - The default ending arrow size + Першапачатковы канцавы памер стрэлкі @@ -1803,7 +1804,7 @@ pattern definitions to be added to the standard patterns Dimension Details - Dimension Details + Звесткі пра вымярэнне @@ -1815,6 +1816,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Перакрыццё лініі вымярэння + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1843,21 +1851,13 @@ pattern definitions to be added to the standard patterns Texts and Dimensions - Texts and Dimensions + Тэксты і вымярэнні Annotations Заметкі - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Першапачатковы множнік маштабу заметкі. -З'яўляецца велічынёй, якая зваротная маштабу, які зададзены ў фішцы маштабу заметак. -Калі маштаб роўны 1: 100, множнік роўны 100. - Font name @@ -2063,19 +2063,18 @@ One unit in the SVG file will be interpreted as one millimeter. Method for importing SVG object colors - Method for importing SVG object colors + Метад імпартавання колераў аб'ектаў SVG If face generation results in a degenerated face, a raw wire from the original shape is added - If face generation results in a degenerated face, -a raw wire from the original shape is added + Калі ў выніку стварэння грані грань атрымліваецца дэфармаванай, дадаецца неапрацаваная ломаная лінія зыходнай фігуры Check to cut shapes according to the even/odd SVG fill rule - Check to cut shapes according to the even/odd SVG fill rule + Праверыць, каб выразаць фігуры ў адпаведнасці з правілам залівання SVG цотны/няцотны @@ -2123,12 +2122,12 @@ a raw wire from the original shape is added Convert white line color to black - Convert white line color to black + Пераўтварыць белы колер лініі ў чорны Maximum segment length for discretized arcs - Maximum segment length for discretized arcs + Найбольшая даўжыня адрэзкаў дыскрэтызацыі дуг @@ -2148,12 +2147,12 @@ This value is the maximum segment length. Import Options - Import Options + Налады імпартавання Imports the areas (3D faces) too - Imports the areas (3D faces) too + Таксама імпартуюцца вобласці (трохмерныя грані) @@ -2178,7 +2177,7 @@ This value is the maximum segment length. All objects containing faces will be exported as 3D polyface meshes - All objects containing faces will be exported as 3D polyface meshes + Усе аб'екты, якія змяшчаюць грані, будуць экспартаваныя ў выглядзе трохмерных шматграннай паверхні сеткі @@ -2219,52 +2218,52 @@ This value is the maximum segment length. If checked, this preferences dialog will be shown each time you import or export a DXF file. - If checked, this preferences dialog will be shown each time you import or export -a DXF file. + Калі птушка, дыялогавае акно пераваг будзе паказвацца пры кожным імпартаванні ці экспартаванні файла фармату DXF. Show the importer dialog when importing a file - Show the importer dialog when importing a file + Паказаць дыялогавае акно сродку імпартавання пры імпартаванні файла Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. - Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. + Ужываць састарэлы сродак імпартавання Python. +Дадзены сродак імпартавання больш функцыянальны, але працуе павольней і патрабуе наяўнасці вонкавай бібліятэкі. Use legacy importer - Use legacy importer + Ужыць састарэлы сродак імпартавання Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. - Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. + Ужываць састарэлы сродак экспартавання Python. +Дадзены сродак экспартавання больш функцыянальны, але працуе павольней і патрабуе наяўнасці вонкавай бібліятэкі. Use legacy exporter - Use legacy exporter + Ужыць састарэлы сродак экспартавання Automatic Update (Legacy Only) - Automatic Update (Legacy Only) + Аўтаматычнае абнаўленне (толькі састарэлы) If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. - If checked, FreeCAD is allowed to download and update the Python libraries -required by the legacy importer. This can also be done manually by installing -the 'dxf_library' addon from the Addon Manager. + Калі птушка, FreeCAD дазволена загружаць і абнаўляць бібліятэкі Python, якія патрэбныя састарэламу сродку імпартавання. +Гэтае таксама можна зрабіць уручную, калі ўсталяваць дадатак 'dxf_library' з кіраўніка дадаткаў. Import As - Import As + Імпартаваць як @@ -2272,15 +2271,14 @@ the 'dxf_library' addon from the Addon Manager. reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. - Creates fully parametric Draft objects. Block definitions are imported as -reusable objects (Part Compounds) and instances become `App::Link` objects, -maintaining the block structure. Best for full integration with the Draft -workbench. + Стварае цалкам параметрычныя аб'екты чарнавіка. +Вызначэнні блокаў імпартуюцца як аб'екты шматразовага ўжывання (злучэнні дэталяў), а асобнікі становяцца аб'ектамі 'App:: Link', якія захоўваць структуру блокаў. +Лепш за ўсё падыходзіць для поўнай інтэграцыі з варштатам чарнавіка. Editable Draft objects (highest fidelity, slowest) - Editable Draft objects (highest fidelity, slowest) + Змяняемыя аб'екты чарнавіка (самая высокая дакладнасць, запавольна) @@ -2288,7 +2286,7 @@ workbench. DxfImportMode - DxfImportMode + DxfImportMode @@ -2296,53 +2294,52 @@ workbench. definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. - Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block -definitions are imported as reusable objects (Part Compounds) and instances -become `App::Link` objects, maintaining the block structure. Best for -script-based post-processing and Part workbench integration. + Стварае параметрычныя аб'екты-дэталі (напрыклад, 'Part::Line', 'Part::Circle'). +Вызначэнні блокаў імпартуюцца як аб'екты шматразовага ўжывання (злучэнні дэталяў), а асобнікі становяцца аб'ектамі 'App:: Link', якія захоўваюць структуру блокаў. +Лепш за ўсё падыходзіць для пасляапрацоўкі на аснове сцэнараў і інтэграцыі з варштатам дэталяў. Editable Part primitives (high fidelity, slower) - Editable Part primitives (high fidelity, slower) + Змяняемыя першасныя дэталі (высокая дакладнасць, запаволена) Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. - Creates a non-parametric shape for each DXF entity. Block definitions are -imported as reusable objects (Part Compounds) and instances become `App::Link` -objects, maintaining the block structure. Good for referencing and measuring. + Стварае непараметрычную фігуру для кожнага аб'екта DXF. +Вызначэнні блокаў імпартуюцца як аб'екты шматразовага ўжывання (злучэнні дэталяў), а асобнікі становяцца аб'ектамі 'App:: Link', якія захоўваюць структуру блокаў. +Зручна для спасылак і вымярэнняў. Individual Part shapes (balanced, recommended) - Individual Part shapes (balanced, recommended) + Фігуры асобных дэталяў (збалансаваныя, рэкамендуемыя) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. - Merges all geometry per layer into a single, non-editable shape. Block -structures are not preserved; their geometry becomes part of the layer's -shape. Best for importing and viewing very large files with maximum performance. + Аб'ядноўвае ўсю геаметрыю пласта ў адзіную, нязменную фігуру. +Структуры блокаў не захоўваюцца; іх геаметрыя становіцца часткай фігуры пласта. +Лепш за ўсё падыходзіць для імпартавання і прагляду вельмі вялікіх файлаў з найбольшай эфектыўнасцю. Fused Part shapes (lowest fidelity, fastest) - Fused Part shapes (lowest fidelity, fastest) + Фігуры аб'яднаных дэталяў (самая нізкая дакладнасць, хутка) Import Settings - Import Settings + Налады імпартавання Global scaling factor - Global scaling factor + Глабальны каэфіцыент маштабавання @@ -2350,20 +2347,19 @@ shape. Best for importing and viewing very large files with maximum performance. between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 - Scale factor to apply to DXF files on import. The factor is the conversion -between the DXF file's unit and millimeters. Example: for files in -millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, -in feet: 304.8 + Маштабны каэфіцыент, які ўжываецца да файлаў DXF пры імпартаванні. +Значэнне каэфіцыента залежыць ад пераўтварэння адзінак вымярэння файла DXF у міліметры. +Напрыклад: для файлаў у міліметрах: 1, у сантыметрах: 10, у метрах: 1000, у цалях: 25.4, у футах: 304.8 If checked, text, mtext, and dimension entities will be imported as Draft objects - If checked, text, mtext, and dimension entities will be imported as Draft objects + Калі птушка, аб'екты тэкст, мтэкст і вымярэнне ўудуць імпартаваныя як аб'екты чарнавіка If checked, point entities will be imported - If checked, point entities will be imported + Калі птушка, кропкавыя аб'екты будуць імпартаваныя @@ -2374,37 +2370,37 @@ in feet: 304.8 If checked, entities from the paper space will also be imported. By default, only model space is imported - If checked, entities from the paper space will also be imported. By default, -only model space is imported + Калі птушка, аб'екты з вобласць паперы таксама будуць імпартаваныя. +Безумоўна імпартуецца толькі прастора мадэлі Paper space objects - Paper space objects + Аб'екты вобласці паперы If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions - If checked, anonymous blocks (whose names begin with *) will also be imported. -These are often used for hatches and dimensions + Калі птушка, ананімныя блокі (назвы якіх пачынаюцца з *) таксама будуць імпартаваныя. +Яны часта ўжываюцца для штрыховак і вымярэнняў Anonymous blocks (*-blocks) - Anonymous blocks (*-blocks) + Ананімныя блокі (*-блокі) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) - If checked, the boundaries of hatch objects will be imported as closed wires. -(Legacy importer only) + Калі птушка, межы аб'ектаў штрыхоўкі будуць імпартаваныя ў выглядзе замкнёных ліній. +(толькі для састарэлага сродку імпартавання) Hatch boundaries - Hatch boundaries + Межы штрыхоўкі @@ -2415,62 +2411,64 @@ These are often used for hatches and dimensions If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied - If checked, colors will be set as specified in the DXF file whenever -possible. Otherwise, default FreeCAD colors are applied + Калі птушка, колеры будуць па магчымасці адпавядаць названым у файле DXF. +У адваротным выпадку прымяняюцца першапачатковыя колеры FreeCAD If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) - If checked, imported texts will get the standard Draft text size, instead of -the size defined in the DXF document. (Legacy importer only) + Калі птушка, тэксты, якия импартуюцца, будуць мець стандартны памер тэксту чарнавіка, а не памер, які вызначаны ў дакуменце DXF. +(толькі для састарэлага сродку імпартавання) Advanced processing - Advanced processing + Удасканаленая апрацоўка If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) - If checked, the legacy importer will attempt to join coincident geometric -objects into wires. This can be slow for large files. (Legacy importer only) + Калі птушка, састарэлы сродак імпартавання паспрабуе аб'яднаць геаметрычныя аб'екты, якія супадаюць, ў ломаныя лініі. +Можа быць павольным працэсам для вялікіх файлаў. +(толькі для састарэлага сродку імпартавання) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) - If checked, polylines that have a width property will be rendered as faces -representing that width. (Legacy importer only) + Калі птушка, ломаныя лініі, якія маюць уласцівасць шырыня, будуць адлюстроўвацца як грані, якія прадстаўляюць гэтую шырыню. +(толькі для састарэлага сродку імпартавання) If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting - If checked, the legacy importer will attempt to create Sketcher objects -instead of Draft or Part objects. This overrides the 'Import As' setting + Калі птушка, састарэлы сродак імпартавання паспрабуе стварыць аб'екты эскіза замест аб'ектаў чарцяжа ці дэталі. +Перавызначае наладу 'Імпартаваць як' Create sketches - Create sketches + Стварыць эскіз Export Options - Export Options + Налады экспартавання Maximum spline segment - Maximum spline segment + Найбольшы адрэзак сплайну Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. - Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. + Найбольшая даўжыня кожнага з адрэзкаў ломанай лініі. +Калі '0', увесь сплайн апрацоўваецца як прамы сегмент. @@ -2509,7 +2507,7 @@ This might fail for post DXF R12 templates. Grid and Snapping - Grid and Snapping + Сетка і намагнічванне @@ -2539,7 +2537,7 @@ Major grid lines are thicker than minor grid lines. Snapping and Modifier Keys - Snapping and Modifier Keys + Клавішы прывязкі і мадыфікатары @@ -2597,11 +2595,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time Найбольшая колькасць аб'ектаў для змены Чарнавіка, якія дазволена апрацаваць адначасова - - - Only show the Draft snap toolbar during commands - Панэль інструментаў прывязкі Чарнавіка адлюстроўваецца толькі падчас выканання каманд - Grid @@ -2664,7 +2657,7 @@ if they match the X, Y or Z axis of the global coordinate system The number of squares in the X- and Y-direction of the grid - The number of squares in the X- and Y-direction of the grid + Колькасць квадратаў у напрамку X і Y сеткі @@ -2684,7 +2677,7 @@ if they match the X, Y or Z axis of the global coordinate system The constrain modifier key - The constrain modifier key + Клавіша мадыфікатара абмежавання @@ -2752,12 +2745,12 @@ if they match the X, Y or Z axis of the global coordinate system DWG Conversion - DWG Conversion + Пераўтварэнне DWG Conversion method - Conversion method + Метад пераўтварэння @@ -2874,16 +2867,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Паменшыць радыус - - - If checked, the Draft snap toolbar will only be visible during commands - Калі птушка, панэль інструментаў прывязкі Чарнавіка будзе бачная толькі падчас выканання каманд - - - - Show the Snap widget in the Draft Workbench - Паказаць фішку прывязкі ў варштату Чарнавіка - E @@ -2922,7 +2905,7 @@ if they match the X, Y or Z axis of the global coordinate system In-Command Shortcuts - In-Command Shortcuts + Спалучэнні клавішаў каманднага рэжыму @@ -3012,22 +2995,37 @@ if they match the X, Y or Z axis of the global coordinate system UI Options - UI Options + Налады інтэрфейсу карыстальніка + + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands - If checked, the Snap widget is displayed in the Draft status bar - Калі птушка, фішка прывязкі будзе бачная ў радку стана Чарнавіка + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3051,12 +3049,12 @@ if they match the X, Y or Z axis of the global coordinate system If checked, the command will not finish until pressing the command button again - If checked, the command will not finish until pressing the command button again + Калі птушка, каманда не завершыцца, пакуль зноў не націснеце кнопку каманды If checked, the next dimension will be placed in a chain with the previously placed Dimension - If checked, the next dimension will be placed in a chain with the previously placed Dimension + Калі птушка, наступнае вымярэнне будзе змешчана ў ланцуг з раней размешчаным вымярэннем @@ -3071,7 +3069,7 @@ if they match the X, Y or Z axis of the global coordinate system Select Edge - Select Edge + Абраць рабро @@ -3091,12 +3089,12 @@ if they match the X, Y or Z axis of the global coordinate system All shapes must be coplanar - All shapes must be coplanar + Усе фігуры павінны быць у адной плоскасці Selected shapes must define a plane - Selected shapes must define a plane + Абраныя фігуры павінны вызначаць плоскасць @@ -3181,7 +3179,7 @@ if they match the X, Y or Z axis of the global coordinate system X coordinate of the point - X coordinate of the point + Каардыната X кропкі @@ -3218,22 +3216,22 @@ if they match the X, Y or Z axis of the global coordinate system Creates the text object and finishes the command - Creates the text object and finishes the command + Стварае тэкставы аб'ект і завяршае выкананне каманды Changes the default style for new objects - Changes the default style for new objects + Змяняе першапачатковы стыль да новых аб'ектаў Toggles construction mode - Toggles construction mode + Пераключае будаўнічы рэжым Label Type - Label Type + Тып меткі @@ -3249,32 +3247,32 @@ if is the first point to set Y coordinate of the point - Y coordinate of the point + Каардыната Y кропкі Z coordinate of the point - Z coordinate of the point + Каардыната Z кропкі Enter Point - Enter Point + Увядзіце кропку Length of the current segment - Length of the current segment + Даўжыня бягучага адрэзку Angle of the current segment - Angle of the current segment + Вугал бягучага адрэзку Locks the current angle - Locks the current angle + Блакуе бягучы вугал нахілу @@ -3301,12 +3299,12 @@ Uncheck to use working plane coordinate system Modify Objects - Modify Objects + Змяніць аб'екты Facebinder Elements - Facebinder Elements + Элементы злучаных паверхняў @@ -3559,10 +3557,9 @@ Not available if the 'Use Part Primitives' preference is enabled Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences - No suitable external DWG converter has been found. -Please set one manually under menu Edit → Preferences → Import/Export → DWG -For more information see: -https://wiki.freecad.org/Import_Export_Preferences + Не знойдзены прыдатны вонкавы сродак пераўтварэння DWG. +Калі ласка, задайце яго ўручную ў меню Праўка → Перавагі → Імпартаваць/экспартаваць → DWG +Каб атрымаць дадатковую інфармацыі, глядзіце: https://wiki.freecad.org/Import_Export_Preferences @@ -3592,24 +3589,24 @@ or try saving to a lower DWG version. Set Custom Scale - Set Custom Scale + Задаць карыстальніцкі маштаб Draft Scale Widget A context menu action used to show or hide this toolbar widget - Draft Scale Widget + Фішка маштабу чарнавіка Set the scale used by Draft annotation tools - Set the scale used by Draft annotation tools + Задаць маштаб, які ўжываецца інструментамі заметкі чарнавіка Draft Snap Widget A context menu action used to show or hide this toolbar widget - Draft Snap Widget + Фішкі прывязкі чарнавіка @@ -3632,44 +3629,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Без бягучага дакументу. Перарываецца. - + Wrong input: object {} not in document. Няправільны ўвод: аб'ект {} адсутнічае ў дакуменце. - + Unable to insert new object into a scaled part Немагчыма ўставіць новы аб'ект у маштабаваную дэталь - + Symbol not implemented. Using a default symbol. Знак не рэалізаваны. Ужыты першапачатковы знак. - + image is Null выява пустая - + filename does not exist on the system or in the resource file імя файла не існуе ні ў сістэме, ні ў файле рэсурсаў - + unable to load texture немагчыма загрузіць тэкстуру - + Does not have 'ViewObject.RootNode'. Не мае 'ViewObject.RootNode'. @@ -3790,7 +3787,7 @@ or try saving to a lower DWG version. Edges do not intersect! - Edges do not intersect! + Рэбры не перасякаюцца! @@ -4046,12 +4043,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4059,13 +4056,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 выбраць другую кропку - + %1 pick third point %1 pick third point @@ -4455,107 +4452,107 @@ The final angle will be the base angle plus this amount. Add Point - Add Point + Дадаць кропку Open Wire - Open Wire + Разамкнуць ломаную лінію Close Wire - Close Wire + Замкнуць ломаную лінію Reverse Wire - Reverse Wire + Павярнуць ломаную лінію Active object must have more than 2 points or nodes - Active object must have more than 2 points or nodes + Бягучы аб'ект павінен мець больш чым дзве кропкі ці вузла Open Spline - Open Spline + Разамкнуць сплайн Close Spline - Close Spline + Замкнуць сплайн Reverse Spline - Reverse Spline + Павярнуць сплайн Move Arc - Move Arc + Рухаць дугу Set First Angle - Set First Angle + Задаць першы вугал Set Last Angle - Set Last Angle + Задаць апошні вугал Set Radius - Set Radius + Задаць радыус Invert Arc - Invert Arc + Інвертаваць дугу Make Sharp - Make Sharp + Зрабіць вострым Make Tangent - Make Tangent + Зрабіць датычным Make Symmetric - Make Symmetric + Зрабіць сіметрычным Reverse Curve - Reverse Curve + Павярнуць крывую Open Curve - Open Curve + Адамкнуць крывую Close Curve - Close Curve + Замкнуць крывую Selection is not a knot - Selection is not a knot + Абраны элемент не вузел Endpoint of Bézier curve cannot be smoothed - Endpoint of Bézier curve cannot be smoothed + Канчатковая кропка крывой Без'е не можа быць згладжаная @@ -4565,18 +4562,18 @@ The final angle will be the base angle plus this amount. Bézier Curve - Bézier Curve + Крывая Без'е Create Bézier Curve - Create Bézier Curve + Стварыць крывую Без'е - Cubic Bézier curve - Кубічная крывая Без'е + Cubic Bézier Curve + Cubic Bézier Curve @@ -4587,12 +4584,12 @@ The final angle will be the base angle plus this amount. %1 click and drag to define first point and knot - %1 click and drag to define first point and knot + %1 націснуць і перацягнуць, каб вызначыць першую кропку і вузел %1 click and drag to define next point and knot - %1 click and drag to define next point and knot + %1 націснуць і перацягнуць, каб вызначыць наступную кропку і вузел @@ -4615,7 +4612,7 @@ The final angle will be the base angle plus this amount. %1 pick opposite point - %1 pick opposite point + %1 выбраць супрацьлеглую кропку @@ -4683,12 +4680,12 @@ The final angle will be the base angle plus this amount. Pick the opposite point of the selection rectangle - Pick the opposite point of the selection rectangle + Выбраць супрацьлеглую кропку абранага прастакутніка Turning a rectangle into a wire - Turning a rectangle into a wire + Ператварэнне прастакутніка ў ломаную лінію @@ -4749,12 +4746,12 @@ The final angle will be the base angle plus this amount. Cannot clone objects without a shape, aborting - Cannot clone objects without a shape, aborting + Немагчыма дубліраваць аб'екты без фігуры, перапыняецца Cannot clone objects without a shape, skipping them - Cannot clone objects without a shape, skipping them + Немагчыма дубліраваць аб'екты без фігуры, прапусціць @@ -4810,12 +4807,12 @@ The final angle will be the base angle plus this amount. Polar Array - Polar Array + Палярная сетка Number of elements must be at least 2 - Number of elements must be at least 2 + Колькасць элементаў павінна быць не менш за два @@ -4830,7 +4827,7 @@ The final angle will be the base angle plus this amount. Create Polar Array - Create Polar Array + Стварыць палярны масіў @@ -4863,28 +4860,28 @@ The final angle will be the base angle plus this amount. Orthogonal Array - Orthogonal Array + Артаганальны масіў Number of elements must be at least 1 - Number of elements must be at least 1 + Колькасць элементаў павінна быць не менш за адзін In linear mode, at least 1 axis must be selected - In linear mode, at least 1 axis must be selected + У лінейным рэжыме неабходна выбраць па меншай меры адну вось Create Orthogonal Array - Create Orthogonal Array + Стварыць артаганальны масіў Create link array: - Create link array: + Стварыць сетку спасылак: @@ -4919,7 +4916,7 @@ The final angle will be the base angle plus this amount. Switch to Ortho Mode - Switch to Ortho Mode + Пераключыць у артаганальны рэжым @@ -4942,7 +4939,7 @@ The final angle will be the base angle plus this amount. Switch to Linear Mode - Switch to Linear Mode + Пераключыць у лінейны рэжым @@ -4952,7 +4949,7 @@ The final angle will be the base angle plus this amount. Interval - Interval + Інтэрвал @@ -4977,31 +4974,31 @@ The final angle will be the base angle plus this amount. Circular Array - Circular Array + Кругавы масіў At least 1 element must be selected - At least 1 element must be selected + Павінны быць абраны, па меншай меры, адзін элемент Number of layers must be at least 2 - Number of layers must be at least 2 + Колькасць пластоў павінна быць не менш за два Selection is not suitable for array - Selection is not suitable for array + Выбар не падыходзіць для масіву Tangential distance cannot be 0 - Tangential distance cannot be 0 + Тангенцыйная адлегласць не можа быць нулявой @@ -5011,7 +5008,7 @@ The final angle will be the base angle plus this amount. Create Circular Array - Create Circular Array + Стварыць круглы масіў @@ -5026,7 +5023,7 @@ The final angle will be the base angle plus this amount. Number of concentric circles: - Number of concentric circles: + Колькасць канцентрычных акружнасцяў: @@ -5087,12 +5084,12 @@ The final angle will be the base angle plus this amount. migrated view properties - migrated view properties + мігрыгаваныя ўласцівасці выгляду , path object does not have 'Edges'. - , path object does not have 'Edges'. + , аб'ект траекторыі не мае 'Рэбраў'. @@ -5119,23 +5116,27 @@ The final angle will be the base angle plus this amount. Start Offset too large for path length. Using 0 instead. - Start Offset too large for path length. Using 0 instead. + Пачатковае зрушэнне занадта вялікае для даўжыні траекторыі. +Замест гэтага ўжываецца нуль. End Offset too large for path length minus Start Offset. Using 0 instead. - End Offset too large for path length minus Start Offset. Using 0 instead. + Канчатковае зрушэнне занадта вялікае для даўжыні траекторыі за мінусам пачатковага зрушэння. +Замест гэтага ўжываецца нуль. Length of tangent vector is 0. Copy not aligned. - Length of tangent vector is 0. Copy not aligned. + Даўжыня датычнага вектару - нуль. +Копія не выраўнаваная. Length of normal vector is 0. Using a default axis instead. - Length of normal vector is 0. Using a default axis instead. + Даўжыня вектару нармалі - нуль. +Замест гэтага ўжываецца першапачатковая вось. @@ -5193,38 +5194,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Кропкі: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Размяшчэнне: - + Wrong input: incorrect type of placement. Няправільны ўвод: няправільны тып размяшчэння. - + Wrong input: incorrect type of points. Няправільны ўвод: няправільны тып кропак. - + Cannot generate shape: Не атрымалася зрабіць фігуру: @@ -5417,7 +5418,7 @@ The final angle will be the base angle plus this amount. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. - Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. + Няправільны ўвод: у аб'екта няма хаця б аднаго элемента ў 'Вяршынях', якія можна ўжываць для вымярэння. @@ -5656,7 +5657,7 @@ The final angle will be the base angle plus this amount. Found 1 non-parametric object: replacing it with a Draft object - Found 1 non-parametric object: replacing it with a Draft object + Знойдзены адзін непараметрычны аб'ект: замяніць яго на аб'ект чарнавіка @@ -5738,12 +5739,12 @@ The final angle will be the base angle plus this amount. Opening Multiple Links - Opening Multiple Links + Адкрыццё множных інтэрнэт-спасылак Multiple links found - Multiple links found + Знойдзена мноства інтэрнэт-спасылак @@ -5804,12 +5805,12 @@ of existing objects in all opened documents? Remove From Layer - Remove From Layer + Выдаліць з пласта Add to New Layer - Add to New Layer + Дадаць у новы пласт @@ -5839,33 +5840,33 @@ of existing objects in all opened documents? Flip Dimension - Flip Dimension + Павярнуць вымярэнне Toggle Grid - Toggle Grid + Пераключыць сетку Change Slope - Change Slope + Змяніць ухіл Select exactly 2 objects, the base object and the path object, before calling this command - Select exactly 2 objects, the base object and the path object, before calling this command + Абраць толькі два аб'екта: асноўны аб'ект і аб'ект траекторыі, перад выклікам каманды Create Path Array - Create Path Array + Стварыць вобласць траекторыі Create Path Twisted Array - Create Path Twisted Array + Стварыць скручаны масіў траекторый @@ -6152,12 +6153,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Y-factor - Y-factor + Каэфіцыент Y Z-factor - Z-factor + Каэфіцыент Z @@ -6182,12 +6183,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick From/To Points - Pick From/To Points + Выбраць кропкі пачатку/канца Edit Scale - Edit Scale + Змяніць маштаб @@ -6228,7 +6229,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Draw Style - Draw Style + Стыль прадстаўлення @@ -6238,12 +6239,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Face Color - Face Color + Колер грані Line Print Color - Line Print Color + Колер друку лініі @@ -6328,26 +6329,26 @@ To enabled FreeCAD to download these libraries, answer Yes. Choose a base object before using this command - Choose a base object before using this command + Абраць асноўны аб'ект перад ужываннем дадзенай каманды Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. - Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. + Напрамак зрушэння не вызначана. +Спачатку навядзіце паказальнік мышы на любы бок ад аб'екта, каб паказаць напрамак. Point object does not have a discrete point, it cannot be used for an array - Point object does not have a discrete point, it cannot be used for an array + Кропкавы аб'ект не мае дыскрэтнай кропкі, ён не можа быць ужыты для масіваў Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager - Download of DXF libraries failed. -Please install the DXF Library addon manually -from menu Tools → Addon Manager + Не атрымалася спампаваць бібліятэкі DXF. +Усталюйце дадатак бібліятэкі DXF уручную з меню Інструменты → Кіраванне дадаткамі @@ -6394,7 +6395,7 @@ from menu Tools → Addon Manager Creates a label, optionally attached to a selected object or subelement - Creates a label, optionally attached to a selected object or subelement + Стварае метку, пры неабходнасці прымацоўваецца да абранага аб'екту ці ўкладзенаму элементу @@ -6407,7 +6408,7 @@ from menu Tools → Addon Manager Creates a 2-point line - Creates a 2-point line + Стварае прастакутнік з дзвюх кропак @@ -6420,7 +6421,7 @@ from menu Tools → Addon Manager Creates a polyline - Creates a polyline + Стварае ломаную лінію @@ -6447,8 +6448,8 @@ from menu Tools → Addon Manager Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. - Joins the selected lines or polylines into a single object. -The lines must share a common point at the start or at the end. + Аб'ядноўвае абраныя лініі ці ломаныя лінія ў адзіны аб'ект. +Лініі павінны мець агульную кропку ў пачатку ці ў канцы. @@ -6461,7 +6462,7 @@ The lines must share a common point at the start or at the end. Creates a multi-line annotation - Creates a multi-line annotation + Стварае шматрадковую заметку @@ -6475,8 +6476,8 @@ The lines must share a common point at the start or at the end. Moves the selected objects. If the "Copy" option is active, it creates displaced copies. - Moves the selected objects. -If the "Copy" option is active, it creates displaced copies. + Перамяшчае абраныя аб'екты. +Калі актыўная налада 'Капіраваць', ствараюцца перамешчаныя копіі. @@ -6489,7 +6490,7 @@ If the "Copy" option is active, it creates displaced copies. Creates a circular arc from a center point and a radius - Creates a circular arc from a center point and a radius + Стварае кругавую дугу з цэнтральнай кропкі і радыусу @@ -6502,7 +6503,7 @@ If the "Copy" option is active, it creates displaced copies. Edits the active object - Edits the active object + Змяняе бягучы аб'ект @@ -6515,7 +6516,7 @@ If the "Copy" option is active, it creates displaced copies. Creates a point - Creates a point + Стварае кропку @@ -6529,8 +6530,8 @@ If the "Copy" option is active, it creates displaced copies. Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. - Rotates the selected objects. -If the "Copy" option is active, it will create rotated copies. + Перамяшчае абраныя аб'екты. +Калі налада 'Капіраваць' актыўная, будуць створаныя перамешчаныя копіі. @@ -6543,7 +6544,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a fillet between 2 selected edges - Creates a fillet between 2 selected edges + Стварае акругленне паміж двума абранымі рэбрамі @@ -6556,7 +6557,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a regular polygon (triangle, square, pentagon…) - Creates a regular polygon (triangle, square, pentagon…) + Стварае правільны шматкутнік (трыкутнік, квадрат, пяцікутнік…) @@ -6569,7 +6570,7 @@ If the "Copy" option is active, it will create rotated copies. Splits the selected line or polyline at a specified point - Splits the selected line or polyline at a specified point + Падзяляе абраную лінію ці ламаную лінію ў названай кропцы @@ -6582,7 +6583,7 @@ If the "Copy" option is active, it will create rotated copies. Trims or extends the selected object, or extrudes single faces - Trims or extends the selected object, or extrudes single faces + Абразае ці выцягвае абраны аб'ект, а таксама выдушвае адзінкавыя грані @@ -6595,7 +6596,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a circle (full circular arc) - Creates a circle (full circular arc) + Стварае акружнасць (поўную дугу акружнасці) @@ -6608,7 +6609,7 @@ If the "Copy" option is active, it will create rotated copies. Creates an ellipse - Creates an ellipse + Стварае эліпс @@ -6621,7 +6622,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a facebinder from the selected faces - Creates a facebinder from the selected faces + Стварае збор паверхняў з абраных граняў @@ -6634,7 +6635,7 @@ If the "Copy" option is active, it will create rotated copies. Creates copies of the selected object in an orthogonal pattern - Creates copies of the selected object in an orthogonal pattern + Стварае копіі абранага аб'екта ў выглядзе артаганальнай шаблону @@ -6647,7 +6648,7 @@ If the "Copy" option is active, it will create rotated copies. Scales the selected objects from a base point - Scales the selected objects from a base point + Маштабаванне абраных аб'ектаў ад асноўнай кропкі @@ -6675,7 +6676,7 @@ Objects added to this layer can share the same visual properties. Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges - Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges + Стварае лінейнае вымярэнне для прамога рабра, закругленага рабра ці дзвюх выбраных кропак, а таксама вуглавога вымярэння для двух прамых рэбраў @@ -6688,7 +6689,7 @@ Objects added to this layer can share the same visual properties. Stretches the selected objects - Stretches the selected objects + Расцягвае абраныя аб'екты @@ -6701,7 +6702,7 @@ Objects added to this layer can share the same visual properties. Creates a 2-point rectangle - Creates a 2-point rectangle + Стварае прастакутнік з дзьвух кропак @@ -6714,7 +6715,7 @@ Objects added to this layer can share the same visual properties. Mirrors the selected objects along a line defined by 2 points - Mirrors the selected objects along a line defined by 2 points + Сіметрычнае пераўтварэнне абраных аб'ектаў наўздоўж лініі, якая вызначаная двюма кропкамі @@ -6727,7 +6728,7 @@ Objects added to this layer can share the same visual properties. Creates a clone of the selected objects - Creates a clone of the selected objects + Стварае дублікаты на абраныя аб'екты @@ -6759,8 +6760,8 @@ convert closed edges into filled faces and parametric polygons, and merge faces Offsets the selected object. It can also create an offset copy of the original object. - Offsets the selected object. -It can also create an offset copy of the original object. + Зрушае абраны аб'ект. +Таксама можна стварыць зрушаную копію зыходнага аб'екта. @@ -6775,9 +6776,8 @@ It can also create an offset copy of the original object. Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. - Heals faulty Draft objects saved with an earlier version of FreeCAD. -If an object is selected it tries to heal only that object, -otherwise it tries to heal all objects in the active document. + Выпраўляе няспраўныя аб'екты чарнавіка, якія захаваныя з дапамогай больш ранняй версіі FreeCAD. +Калі аб'ект абраны, будзе спроба аднавіць толькі дадзены аб'ект, у адваротным выпадку будзе спроба аднавіць усе аб'екты ў бягучым дакуменце. @@ -6792,9 +6792,10 @@ otherwise it tries to heal all objects in the active document. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. - Downgrades the selected objects into simpler shapes. -The result of the operation depends on the types of objects, which may be downgraded several times in a row. -For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. + Пераўтварае абраныя аб'екты ў больш простыя фігуры. +Вынік аперацыі залежыць ад тыпаў аб'ектаў, якія могуць быць паніжаныя некалькі разоў запар. +Напрыклад, суцэльнае трохмернае цела разбіваецца на асобныя грані, ломаныя лініі, і потым рэбры. +Грані таксама могуць быць аднятыя. @@ -7113,14 +7114,13 @@ For other types, the string will be calculated automatically from the object def For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. - The type of information displayed by this label. + Тып інфармацыі, якая адлюстроўваецца меткай. -If 'Custom' is chosen, the contents of 'Custom Text' will be used. -For other types, the string will be calculated automatically from the object defined in 'Target'. -'Tag' and 'Material' only work for objects that have these properties, like BIM objects. +Калі абрана 'Карыстальніцкі', будзе ўжывацца змест 'Карыстальніцкага тэксту'. +Для іншых тыпаў радок будзе вылічаны аўтаматычна з аб'екту, які вызначаны ў 'Мэце'. +'Метка' і 'Матэрыял' працуюць толькі для аб'ектаў, якія валодаюць гэтымі ўласцівасцямі, такіх як аб'екты BIM. -For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', -or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. +Для 'Становішча', 'Даўжыня' і 'Плошча' гэтыя ўласцівасці будуць вынятыя з асноўнага аб'екту ў 'Мэце', альбо з укладзенага элементу 'ВяршыняN', 'РаброN' ці 'ГраньN' адпаведна, калі яны паказаныя. @@ -7155,7 +7155,7 @@ Leave this property empty to create copies along the entire 'Path Object'. Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode - Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode + Прымусовае ўжыванне 'Вертыкальнага вектарў' у якасці лакальнага напрамку Z пры ўжыванні рэжыму выраўноўвання ''Зыходны' ці 'Датычны' @@ -7248,10 +7248,10 @@ Otherwise the copies will have the same orientation as the original Base object. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. - The type of array to create. -- Ortho: places the copies in the direction of the global X, Y, Z axes. -- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. -- Circular: places the copies in concentric circles around the base object. + Тып масіва для стварэння. +- Артаганальнай: размяшчае копіі ў напрамку глабальных восей X, Y, Z. +- Палярны: размяшчае копіі па дузе акружнасці з дакладнасцю да зададзенага вугла і з пэўнай арыентацыяй, якая вызначаецца цэнтрам і воссю. +- Кругавы: размяшчае копіі канцэнтрычнымі акружнасці вакол асноўнага аб'екту. @@ -7264,32 +7264,32 @@ Otherwise the copies will have the same orientation as the original Base object. Number of copies in X-direction - Number of copies in X-direction + Колькасць копій у напрамку восі X Number of copies in Y-direction - Number of copies in Y-direction + Колькасць копій у напрамку восі Y Number of copies in Z-direction - Number of copies in Z-direction + Колькасць копій у напрамку восі Z Distance and orientation of intervals in X-direction - Distance and orientation of intervals in X-direction + Адлегласць і арыентацыя інтэрвалаў у напрамку восі X Distance and orientation of intervals in Y-direction - Distance and orientation of intervals in Y-direction + Адлегласць і арыентацыя інтэрвалаў у напрамку восі Y Distance and orientation of intervals in Z-direction - Distance and orientation of intervals in Z-direction + Адлегласць і арыентацыя інтэрвалаў у напрамку восі Z @@ -7330,17 +7330,18 @@ Leave this property empty to be able to set 'Axis' and 'Center' manually. Distance between concentric circles - Distance between concentric circles + Адлегласць паміж канцэнтрычнымі акружнасцямі Distance between copies in the same circle - Distance between copies in the same circle + Адлегласць паміж копіямі ў адной і той жа акружнасці Number of concentric circle. The 'Base' object counts as one circle. - Number of concentric circle. The 'Base' object counts as one circle. + Колькасць канцентрычных акружнасцяў. +Аб'ект 'Аснова' лічыцца адной акружнасцю. @@ -8083,12 +8084,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8111,7 +8112,7 @@ beyond the dimension line Bézier Curve - Bézier Curve + Крывая Без'е @@ -8152,7 +8153,7 @@ Control points and properties of each knot can be edited after creation. Circular Array - Circular Array + Кругавы масіў @@ -8165,7 +8166,7 @@ Control points and properties of each knot can be edited after creation. Flip Dimension - Flip Dimension + Павярнуць вымярэнне @@ -8430,7 +8431,7 @@ straight Draft lines that are drawn on the XY-plane. Polar Array - Polar Array + Палярная сетка @@ -8553,8 +8554,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge @@ -8788,7 +8789,7 @@ The initial projection direction is the opposite of the current active view dire Import As - Import As + Імпартаваць як @@ -8827,9 +8828,9 @@ script-based post-processing. Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. - Creates a non-parametric shape for each DXF entity. Block definitions are -imported as reusable objects (Part Compounds) and instances become `App::Link` -objects, maintaining the block structure. Good for referencing and measuring. + Стварае непараметрычную фігуру для кожнага аб'екта DXF. +Вызначэнні блокаў імпартуюцца як аб'екты шматразовага ўжывання (злучэнні дэталяў), а асобнікі становяцца аб'ектамі 'App:: Link', якія захоўваюць структуру блокаў. +Зручна для спасылак і вымярэнняў. diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 7ee8a01607..0f4b9a6a48 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index c5e28e3cfa..57f17dbc7f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -1497,16 +1497,6 @@ Els objectes també es poden afegir automàticament als grups. Include groups in layer list Incloure grups a la llista de capes - - - If checked, instructions are displayed in the Report view when using Draft commands - Si està marcada, les instruccions es mostren a la vista Informe quan s'utilitzen les comandes d'Esbós - - - - Show prompts in the Report view - Mostra les indicacions a la vista Informe - If checked, base objects, instead of created copies, are selected after copying @@ -1608,6 +1598,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1801,6 +1801,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Superació de la línia de dimensió + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1836,13 +1843,6 @@ pattern definitions to be added to the standard patterns Annotations Anotacions - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - El multiplicador d'escala d'anotació predeterminat. Aquest és la inversa de l'escala establerta en el -Giny d'escala d'anotacions. Si l'escala és 1:100, el multiplicador és 100. - Font name @@ -2573,11 +2573,6 @@ Utilitzeu Commuta la graella de l'Esbós per canviar-ho per a la vista activa.The maximum number of objects Draft Edit is allowed to process at the same time Nombre màxim d'objectes d'Edició d'Esbós que es poden processar a la vegada - - - Only show the Draft snap toolbar during commands - Mostra només la barra d'eines de l'ajust d'Esbós durant les comandes - Grid @@ -2849,16 +2844,6 @@ si coincideixen amb l'eix X, Y o Z del sistema de coordenades globalDecrease radius Disminuir radi - - - If checked, the Draft snap toolbar will only be visible during commands - Si està marcat, la barra d'eines de l'ajust d'Esbós només serà visible durant les comandes - - - - Show the Snap widget in the Draft Workbench - Mostra el giny Ajust al banc de treball d'Esbós - E @@ -2989,20 +2974,35 @@ si coincideixen amb l'eix X, Y o Z del sistema de coordenades globalUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Si està marcat, el giny Ajust es mostra a la barra d'estat d'Esbós + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3605,44 +3605,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Cap document actiu. Avortant. - + Wrong input: object {} not in document. Entrada incorrecta: l'objecte {} no es troba al document. - + Unable to insert new object into a scaled part No es pot inserir un nou objecte a una part escalada - + Symbol not implemented. Using a default symbol. Símbol no implementat. Utilitzant un símbol per defecte. - + image is Null la imatge és nul·la - + filename does not exist on the system or in the resource file nom de fitxer no existeix al sistema ni al fitxer de recursos - + unable to load texture no es pot carregar la textura - + Does not have 'ViewObject.RootNode'. No té "ViewObject.RootNode". @@ -4016,12 +4016,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4029,13 +4029,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4545,8 +4545,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Corba de Bézier cúbica + Cubic Bézier Curve + Cubic Bézier Curve @@ -5162,38 +5162,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Punts: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Posicionament: - + Wrong input: incorrect type of placement. Entrada incorrecta: tipus de posicionament incorrecte. - + Wrong input: incorrect type of points. Entrada incorrecta: tipus de punts incorrecte. - + Cannot generate shape: No es pot generar la forma: @@ -8069,12 +8069,12 @@ més enllà de la línia de cota Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8539,8 +8539,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index a67d7c7643..f4616566a9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 30ec89ff41..0a4de2bcbf 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -1509,16 +1509,6 @@ Objekty pak mohou být automaticky přidány i do skupin. Include groups in layer list Zahrnout skupiny do seznamu vrstev - - - If checked, instructions are displayed in the Report view when using Draft commands - Je-li zaškrtnuto, při použití příkazů Návrhu se pokyny zobrazují v Zobrazení reportu - - - - Show prompts in the Report view - Nápověda v Zobrazení reportu - If checked, base objects, instead of created copies, are selected after copying @@ -1624,6 +1614,16 @@ jedné sekundy, aby se předešlo náhodné modifikaci vložené hodnoty.Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1818,6 +1818,13 @@ vzorů, které mají být přidány do standardních vzorů Dimension line overshoot Přesah kótovací čáry + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1853,13 +1860,6 @@ vzorů, které mají být přidány do standardních vzorů Annotations Poznámky - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Výchozí multiplikátor měřítka poznámek. Ten je inverzní k měřítku nastavenému pomocí widgetu -Měřítko poznámek. Pokud je měřítko 1:100, multiplikátor je 100. - Font name @@ -2597,11 +2597,6 @@ Použijte Přepnout mřížku v Návrhu pro změnu v aktivním zobrazení.The maximum number of objects Draft Edit is allowed to process at the same time Maximální počet objektů, které je možno upravovat v Návrhu současně - - - Only show the Draft snap toolbar during commands - Zobrazovat panel přichytávání Návrhu pouze během příkazů - Grid @@ -2874,16 +2869,6 @@ pokud odpovídají osám X, Y, nebo Z globální souřadnicové soustavyDecrease radius Zmenšit poloměr - - - If checked, the Draft snap toolbar will only be visible during commands - Je-li zaškrtnuto, nástrojová lišta přichytávání v Návrhu bude viditelná pouze během příkazů - - - - Show the Snap widget in the Draft Workbench - Zobrazit widget Přichytávání v pracovním prostředí Návrhu - E @@ -3014,20 +2999,35 @@ pokud odpovídají osám X, Y, nebo Z globální souřadnicové soustavyUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Pokud zaškrtnuto, widget přitáhnutí je zobrazen ve stavovém řádku návrhu + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3634,44 +3634,44 @@ nebo zkuste uložit do nižší verze DWG. - + No active document. Aborting. Žádný aktivní dokument. Přerušení. - + Wrong input: object {} not in document. Chybný vstup: objekt {} není v dokumentu. - + Unable to insert new object into a scaled part Nelze vložit nový objekt do upravené součásti - + Symbol not implemented. Using a default symbol. Symbol není implementován. Použití výchozího symbolu. - + image is Null obrázek je Null - + filename does not exist on the system or in the resource file název_souboru neexistuje v systému ani v souboru prostředků - + unable to load texture nelze načíst texturu - + Does not have 'ViewObject.RootNode'. Nemá 'ViewObject.RootNode'. @@ -4045,12 +4045,12 @@ nebo zkuste uložit do nižší verze DWG. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4058,13 +4058,13 @@ nebo zkuste uložit do nižší verze DWG. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4574,8 +4574,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Kubická Bézierova křivka + Cubic Bézier Curve + Cubic Bézier Curve @@ -5191,38 +5191,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Body: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Umístění: - + Wrong input: incorrect type of placement. Špatné zadání: nesprávný typ umístění. - + Wrong input: incorrect type of points. Špatné zadání: nesprávný typ bodů. - + Cannot generate shape: Nelze vygenerovat tvar: @@ -8104,12 +8104,12 @@ za kótovací čárou Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8574,8 +8574,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index aad310454e..c6c42fea99 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index ca44a4287d..a26bd6dfab 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -305,7 +305,7 @@ Displays the dimension line - Displays the dimension line + Zeigt die Maßlinie an @@ -1505,16 +1505,6 @@ Objekte können dann automatisch auch zu Gruppen hinzugefügt werden.Include groups in layer list Gruppen in Ebenenliste einbeziehen - - - If checked, instructions are displayed in the Report view when using Draft commands - Wenn aktiviert, werden Anweisungen im Ausgabefenster angezeigt, während Befehle des Arbeitsbereichs Draft ausgeführt werden - - - - Show prompts in the Report view - Nachrichten der Eingabezeile im Ausgabefenster anzeigen - If checked, base objects, instead of created copies, are selected after copying @@ -1622,6 +1612,16 @@ wird die Bewegung der Maus so lange deaktiviert, bis der Befehl beendet ist.Command Options Befehlsoptionen + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1816,6 +1816,13 @@ Muster enthält, die zu den Standardmustern hinzugefügt werden sollenDimension line overshoot Maßlinienüberstand + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1851,13 +1858,6 @@ Muster enthält, die zu den Standardmustern hinzugefügt werden sollenAnnotations Beschriftungen - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Der Standard-Multiplikator für den Beschriftungsmaßstab. Dies ist der Kehrwert -des Maßstabs im Widget Beschriftungsmaßstab. Ist der Maßstab 1:100, ist der Multiplikator 100. - Font name @@ -2262,7 +2262,7 @@ the 'dxf_library' addon from the Addon Manager. Import As - Import As + Importieren als @@ -2335,12 +2335,12 @@ shape. Best for importing and viewing very large files with maximum performance. Import Settings - Import Settings + Import-Einstellungen Global scaling factor - Global scaling factor + Globaler Skalierungsfaktor @@ -2420,8 +2420,8 @@ possible. Otherwise, default FreeCAD colors are applied If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) - If checked, imported texts will get the standard Draft text size, instead of -the size defined in the DXF document. (Legacy importer only) + Wenn aktiviert, erhalten importierte Texte die Draft-Standardschriftgröße, statt ihrer +im DXF-Dokument festgelegten Größe (Nur Legacy-Importer) @@ -2452,18 +2452,18 @@ instead of Draft or Part objects. This overrides the 'Import As' setting Create sketches - Create sketches + Skizzen erstellen Export Options - Export Options + Exportoptionen Maximum spline segment - Maximum spline segment + Maximale Länge eines Spline-Segments @@ -2507,7 +2507,7 @@ Dies kann bei neueren als DXF R12 Vorlagen fehlschlagen. Grid and Snapping - Grid and Snapping + Raster und Einrasten @@ -2537,7 +2537,7 @@ Hauptrasterlinien sind breiter als Nebenrasterlinien. Snapping and Modifier Keys - Snapping and Modifier Keys + Einrasten und Umschalttasten @@ -2595,11 +2595,6 @@ Draft Raster ein-/ausblenden verwenden, um dies für die aktive Ansicht zu ände The maximum number of objects Draft Edit is allowed to process at the same time Die maximale Anzahl von Objekten, die Draft-Bearbeiten gleichzeitig bearbeiten darf - - - Only show the Draft snap toolbar during commands - Die Symbolleiste Draft-Einrasten nur während der Ausführung von Befehlen anzeigen - Grid @@ -2684,7 +2679,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems The constrain modifier key - The constrain modifier key + Die Umschalttaste für den Randbedingungsmodus @@ -2750,12 +2745,12 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems DWG Conversion - DWG Conversion + DWG-Konvertierung Conversion method - Conversion method + Konvertierungsmethode @@ -2872,16 +2867,6 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems Decrease radius Radius verkleinern - - - If checked, the Draft snap toolbar will only be visible during commands - Wenn aktiviert, wird die Symbolleiste Draft-Einrasten nur während der Ausführung von Befehlen sichtbar sein - - - - Show the Snap widget in the Draft Workbench - Das Widget Einrasten im Arbeitsbereich Draft anzeigen - E @@ -2920,7 +2905,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems In-Command Shortcuts - In-Command Shortcuts + Befehlsinterne Tastaturkürzel @@ -3010,22 +2995,37 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems UI Options - UI Options + Optionen der Benutzerschnittstelle + + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands - If checked, the Snap widget is displayed in the Draft status bar - Wenn aktiviert, wird das Widget Einrasten in der Draft-Statusleiste angezeigt + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3049,12 +3049,12 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems If checked, the command will not finish until pressing the command button again - If checked, the command will not finish until pressing the command button again + Wenn aktiviert, wird der Befehl nicht beendet, bis die Befehlsschaltfläche erneut gedrückt wird If checked, the next dimension will be placed in a chain with the previously placed Dimension - If checked, the next dimension will be placed in a chain with the previously placed Dimension + Wenn aktiviert, wird das nächste Maß in einer Reihe mit dem zuvor positionierten Maß verkettet @@ -3069,7 +3069,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems Select Edge - Select Edge + Kante auswählen @@ -3089,12 +3089,12 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems All shapes must be coplanar - All shapes must be coplanar + Alle Formen müssen komplanar sein Selected shapes must define a plane - Selected shapes must define a plane + Die ausgewählten Formen müssen eine Ebene festlegen @@ -3179,7 +3179,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems X coordinate of the point - X coordinate of the point + X-Koordinate des Punktes @@ -3216,7 +3216,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems Creates the text object and finishes the command - Creates the text object and finishes the command + Erstellt das Textobjekt und schließt den Befehl ab @@ -3226,7 +3226,7 @@ gefärbt, wenn sie mit der X-, Y- oder Z-Achse des globalen Koordinatensystems Toggles construction mode - Toggles construction mode + Konstruktionsmodus umschalten @@ -3247,17 +3247,17 @@ if is the first point to set Y coordinate of the point - Y coordinate of the point + Y-Koordinate des Punktes Z coordinate of the point - Z coordinate of the point + Z-Koordinate des Punktes Enter Point - Enter Point + Punkt eingeben @@ -3272,7 +3272,7 @@ if is the first point to set Locks the current angle - Locks the current angle + Sperrt den aktuellen Winkel @@ -3299,12 +3299,12 @@ Deaktivieren um das Koordinatensystem der aktuellen Arbeitsebene zu verwenden Modify Objects - Modify Objects + Objekte ändern Facebinder Elements - Facebinder Elements + Flächenverbinder-Elemente @@ -3371,7 +3371,7 @@ Steht nicht zur Verfügung, wenn die Einstellung 'Part-Grundkörper verwenden' a Selects an existing edge to be measured by this dimension - Wählt eine vorhandene Kante aus, die von dieser Dimension aus gemessen werden soll + Wählt eine vorhandene Kante aus, die mit diesem Maß gemessen werden soll @@ -3596,7 +3596,7 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Draft Scale Widget A context menu action used to show or hide this toolbar widget - Draft Scale Widget + Draft-Widget Skalieren @@ -3607,7 +3607,7 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Draft Snap Widget A context menu action used to show or hide this toolbar widget - Draft Snap Widget + Draft-Widget Einrasten @@ -3630,44 +3630,44 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis - + No active document. Aborting. Kein aktives Dokument. Abbruch. - + Wrong input: object {} not in document. Falsche Eingabe: Objekt {} nicht im Dokument. - + Unable to insert new object into a scaled part Kann kein neues Objekt in einen skaliertes Teil einfügen - + Symbol not implemented. Using a default symbol. Symbol nicht implementiert. Ein Standardsymbol wird verwendet. - + image is Null Bild ist Null - + filename does not exist on the system or in the resource file Dateiname existiert nicht auf dem System oder in der Ressourcendatei - + unable to load texture Textur kann nicht geladen werden - + Does not have 'ViewObject.RootNode'. Hat keinen 'ViewObject.RootNode'. @@ -3800,17 +3800,17 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis %1 pick next point, snap to first point to close - %1 pick next point, snap to first point to close + %1 nächsten Punkt auswählen, zum Schließen auf den ersten Punkt einrasten %1 pick next point - %1 pick next point + %1 nächsten Punkt auswählen Unable to create a wire from the selected objects - Unable to create a wire from the selected objects + Es kann kein Kantenzug aus den ausgewählten Objekten erstellt werden @@ -3843,12 +3843,12 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Join Lines - Join Lines + Linien verbinden Only Draft lines and wires can be joined - Only Draft lines and wires can be joined + Nur Draft-Linien und -Linienzüge können verbunden werden @@ -3869,7 +3869,7 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Select an object to convert - Select an object to convert + Ein Objekt zum Umwandeln auswählen @@ -3960,17 +3960,17 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis %1 constrain - %1 constrain + %1 ausrichten %1 snap - %1 snap + %1 einrasten %1/%2/%3 switch constraint - %1/%2/%3 switch constraint + %1/%2/%3 Ausrichtung wechseln @@ -4032,37 +4032,37 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis %1 pick start angle - %1 pick start angle + %1 Startwinkel auswählen Arc From 3 Points - Arc From 3 Points + Kreisbogen aus 3 Punkten - + Create Arc From 3 Points - Create Arc From 3 Points + Kreisbogen aus 3 Punkten erstellen - + %1 pick first point - %1 pick first point + %1 ersten Punkt auswählen - + %1 pick second point - %1 pick second point + %1 zweiten Punkt auswählen - + %1 pick third point - %1 pick third point + %1 dritten Punkt auswählen @@ -4077,12 +4077,12 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Edit Node - Edit Node + Knoten bearbeiten Too many objects selected, maximum number set to: - Too many objects selected, maximum number set to: + Zu viele Objekte ausgewählt, die maximale Anzahl beträgt: @@ -4097,7 +4097,7 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis Annotation Style Editor - Annotation Style Editor + Beschriftungsstil-Editor @@ -4191,7 +4191,7 @@ Bitte die DWG-Datei in einen Verzeichnispfad ohne Leerzeichen und nicht-lateinis %1 pick point - %1 pick point + %1 Punkt auswählen @@ -4244,12 +4244,12 @@ The final angle will be the base angle plus this amount. Add to New Group - Add to New Group + Zu neuer Gruppe hinzufügen Add to Group - Add to Group + Zur Gruppe hinzufügen @@ -4267,7 +4267,7 @@ The final angle will be the base angle plus this amount. Layer name - Layer name + Name der Ebene @@ -4294,7 +4294,7 @@ The final angle will be the base angle plus this amount. Group name - Group name + Gruppenname @@ -4331,12 +4331,12 @@ The final angle will be the base angle plus this amount. Enter radius - Enter radius + Radius eingeben Create Fillet - Create Fillet + Verrundung erstellen @@ -4366,7 +4366,7 @@ The final angle will be the base angle plus this amount. This object is not supported - This object is not supported + Dieses Objekt wird nicht unterstützt @@ -4386,12 +4386,12 @@ The final angle will be the base angle plus this amount. These objects do not intersect - These objects do not intersect + Diese Objekte überschneiden sich nicht Too many intersection points - Too many intersection points + Zu viele Schnittpunkte @@ -4427,7 +4427,7 @@ The final angle will be the base angle plus this amount. Create B-Spline - Create B-Spline + B-Spline erstellen @@ -4444,13 +4444,13 @@ The final angle will be the base angle plus this amount. Delete Point - Delete Point + Punkt löschen Add Point - Add Point + Punkt hinzufügen @@ -4490,62 +4490,62 @@ The final angle will be the base angle plus this amount. Move Arc - Move Arc + Kreisbogen verschieben Set First Angle - Set First Angle + Ersten Winkel festlegen Set Last Angle - Set Last Angle + Letzten Winkel festlegen Set Radius - Set Radius + Radius festlegen Invert Arc - Invert Arc + Kreisbogen invertieren Make Sharp - Make Sharp + Scharf machen Make Tangent - Make Tangent + Zu Tangente machen Make Symmetric - Make Symmetric + Symmetrisch machen Reverse Curve - Reverse Curve + Kurve umkehren Open Curve - Open Curve + Kurve öffnen Close Curve - Close Curve + Kurve schließen Selection is not a knot - Selection is not a knot + Auswahl ist kein Knoten @@ -4560,18 +4560,18 @@ The final angle will be the base angle plus this amount. Bézier Curve - Bézier Curve + Bézierkurve Create Bézier Curve - Create Bézier Curve + Bézierkurve erstellen - Cubic Bézier curve - Kubische Bézierkurve + Cubic Bézier Curve + Cubic Bézier Curve @@ -4582,12 +4582,12 @@ The final angle will be the base angle plus this amount. %1 click and drag to define first point and knot - %1 click and drag to define first point and knot + %1 klicken und ziehen, um den ersten Punkt und Knoten festzulegen %1 click and drag to define next point and knot - %1 click and drag to define next point and knot + %1 klicken und ziehen, um den nächsten Punkt und Knoten festzulegen @@ -4610,7 +4610,7 @@ The final angle will be the base angle plus this amount. %1 pick opposite point - %1 pick opposite point + %1 gegenüberliegenden Punkt auswählen @@ -4873,13 +4873,13 @@ The final angle will be the base angle plus this amount. Create Orthogonal Array - Create Orthogonal Array + Rechtwinklige Anordnung erstellen Create link array: - Create link array: + Verknüpfungsanordnung erstellen: @@ -4947,7 +4947,7 @@ The final angle will be the base angle plus this amount. Interval - Interval + Intervall @@ -4979,7 +4979,7 @@ The final angle will be the base angle plus this amount. At least 1 element must be selected - At least 1 element must be selected + Es muss mindestens 1 Element ausgewählt werden @@ -5187,38 +5187,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Punkte: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: - Platzierung: + Positionierung: - + Wrong input: incorrect type of placement. Falsche Eingabe: Falscher Art der Platzierung. - + Wrong input: incorrect type of points. Falsche Eingabe: Falsche Art der Punkte. - + Cannot generate shape: Kann Form nicht erzeugen: @@ -5406,7 +5406,7 @@ The final angle will be the base angle plus this amount. Wrong input: object doesn't have a 'Shape' to measure. - Falsche Eingabe: Objekt hat keine 'Form' um zu messen. + Falsche Eingabe: Das Objekt enthält keine 'Form' zum Messen. @@ -5839,12 +5839,12 @@ of existing objects in all opened documents? Toggle Grid - Toggle Grid + Raster umschalten Change Slope - Change Slope + Neigung ändern @@ -5890,17 +5890,17 @@ of existing objects in all opened documents? Construction Mode - Construction Mode + Konstruktionsmodus Toggle Display Mode - Toggle Display Mode + Anzeigemodus umschalten 2 edges are needed - 2 edges are needed + 2 Kanten sind erforderlich @@ -6142,17 +6142,17 @@ To enabled FreeCAD to download these libraries, answer Yes. X-factor - X-factor + X-Faktor Y-factor - Y-factor + Y-Faktor Z-factor - Z-factor + Z-Faktor @@ -6497,7 +6497,7 @@ If the "Copy" option is active, it creates displaced copies. Edits the active object - Edits the active object + Bearbeitet das aktive Objekt @@ -6510,7 +6510,7 @@ If the "Copy" option is active, it creates displaced copies. Creates a point - Creates a point + Erstellt einen Punkt @@ -6603,7 +6603,7 @@ If the "Copy" option is active, it will create rotated copies. Creates an ellipse - Creates an ellipse + Erstellt eine Ellipse @@ -6696,7 +6696,7 @@ Objekte, die dieser Ebene hinzugefügt wurden, können die gleichen visuellen Ei Creates a 2-point rectangle - Creates a 2-point rectangle + Erstellt ein Rechteck über 2 Punkte @@ -7275,17 +7275,17 @@ Andernfalls haben die Kopien dieselbe Ausrichtung wie das ursprüngliche Basisob Number of copies in X-direction - Number of copies in X-direction + Anzahl der Kopien in X-Richtung Number of copies in Y-direction - Number of copies in Y-direction + Anzahl der Kopien in Y-Richtung Number of copies in Z-direction - Number of copies in Z-direction + Anzahl der Kopien in Z-Richtung @@ -7569,7 +7569,7 @@ Diese Eigenschaft ist schreibgeschützt, da die Zahl von den Punkten im 'Punkt O The object measured by this dimension - The object measured by this dimension + Das mit diesem Maß gemessene Objekt @@ -7645,13 +7645,13 @@ from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. - Der Wert der Messung. + Der Messwert. -Diese Eigenschaft ist schreibgeschützt. Der Wert wird -aus den Eigenschaften 'Start' und 'Ende' berechnet. +Diese Eigenschaft ist schreibgeschützt, da der Wert aus +den Eigenschaften 'Start' und 'End' berechnet. -Wenn die 'Verknüpfte Geometrie' ein Bogen oder Kreis ist, ist diese 'Entfernung' -je nach der Eigenschaft 'Durchmesser' der Radius oder Durchmesser. +Wenn die 'Verknüpfte Geometrie' ein Bogen oder Kreis ist, ist diesr 'Abstand' +der Radius oder der Durchmesser, entsprechend der Eigenschaft 'Diameter'. @@ -7680,10 +7680,10 @@ Der Bogen wird gegen den Uhrzeigersinn gezeichnet. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. - Der Mittelpunkt der Bemassungslinie, die ein kreisförmiger Bogen ist. + Der Mittelpunkt der Maßlinie, die ein kreisförmiger Bogen ist. Dies ist normalerweise der Punkt, an dem sich zwei Liniensegmente oder deren Erweiterungen -kreuzen, was zum gemessenen 'Winkel' zwischen ihnen führt. +kreuzen und den zwischen ihnen gemessenen 'Winkel' ergeben. @@ -7691,10 +7691,10 @@ kreuzen, was zum gemessenen 'Winkel' zwischen ihnen führt. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. - Der Wert der Messung. + Der Messwert. -Diese Eigenschaft ist schreibgeschützt, da der Wert von -den Werten der 'Erster Winkel' und 'Letzter Winkel' abhängig ist. +Diese Eigenschaft ist schreibgeschützt, da der Wert aus +den Werten der Eigenschaften 'Erster Winkel' und 'Letzter Winkel' berechnet wird. @@ -8103,12 +8103,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools - Arc Tools + Kreisbogenwerkzeuge - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8131,7 +8131,7 @@ beyond the dimension line Bézier Curve - Bézier Curve + Bézierkurve @@ -8159,7 +8159,7 @@ Control points and properties of each knot can be edited after creation. Bézier Tools - Bézier Tools + Bézierwerkzeuge @@ -8217,7 +8217,7 @@ However, a single sketch with disconnected traces is converted into several indi Toggle Grid - Toggle Grid + Raster umschalten @@ -8230,7 +8230,7 @@ However, a single sketch with disconnected traces is converted into several indi Add to Group… - Add to Group… + Zur Gruppe hinzufügen… @@ -8243,7 +8243,7 @@ However, a single sketch with disconnected traces is converted into several indi Select Group - Select Group + Gruppe auswählen @@ -8286,7 +8286,7 @@ The construction group is created if it does not exist. New Named Group - New Named Group + Neue benannte Gruppe @@ -8476,7 +8476,7 @@ straight Draft lines that are drawn on the XY-plane. Set Style - Set Style + Stil festlegen @@ -8504,7 +8504,7 @@ The initial projection direction is the opposite of the current active view dire Shape From Text - Shape From Text + Form aus Text @@ -8556,7 +8556,7 @@ The initial projection direction is the opposite of the current active view dire Snap Grid - Snap Grid + Einrasten auf Raster @@ -8569,12 +8569,12 @@ The initial projection direction is the opposite of the current active view dire Snap Intersection - Snap Intersection + Einrasten auf Schnittpunkt - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge @@ -8738,7 +8738,7 @@ The initial projection direction is the opposite of the current active view dire Apply Current Style - Apply Current Style + Aktuellen Style anwenden @@ -8751,7 +8751,7 @@ The initial projection direction is the opposite of the current active view dire Highlight Subelements - Highlight Subelements + Unterelemente hervorheben @@ -8764,12 +8764,12 @@ The initial projection direction is the opposite of the current active view dire Toggle Construction Mode - Toggle Construction Mode + Konstruktionsmodus umschalten Toggles the construction mode - Toggles the construction mode + Schaltet den Konstruktionsmodus um @@ -8803,12 +8803,12 @@ The initial projection direction is the opposite of the current active view dire DXF Import - DXF Import + DXF-Import Import As - Import As + Importieren als diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 66e2166602..24aa419a3a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index 4f1b0cc4d0..16aeb96beb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -1503,16 +1503,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Συμπεριλάβετε ομάδες στη λίστα επιπέδων - - - If checked, instructions are displayed in the Report view when using Draft commands - Εάν επιλεχθεί, εμφανίζονται οδηγίες στην προβολή Αναφοράς κατά τη χρήση εντολών Σχεδίων - - - - Show prompts in the Report view - Εμφάνιση ερωτήσεων στην προβολή αναφοράς - If checked, base objects, instead of created copies, are selected after copying @@ -1618,6 +1608,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1812,6 +1812,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Υπέρβαση γραμμής διάστασης + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1847,12 +1854,6 @@ pattern definitions to be added to the standard patterns Annotations Περιγραφές - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Πολλαπλασιαστής κλίμακας σχολιασμού είναι το αντίστροφο της κλίμακας που ορίζεται στο Γραφικό στοιχείο κλίμακας σχολιασμού. Εάν η κλίμακα είναι 1:100, ο πολλαπλασιαστής είναι 100. - Font name @@ -2590,11 +2591,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2866,16 +2862,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Μείωση ακτίνας - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3006,20 +2992,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options Επιλογές διεπαφής χρήστη + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3624,44 +3625,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Δεν υπάρχει ενεργό έγγραφο. Εγκατάλειψη. - + Wrong input: object {} not in document. Λάθος είσοδος: αυτό το {} αντικείμενο δεν είναι στο έγγραφο. - + Unable to insert new object into a scaled part Δεν είναι δυνατή η εισαγωγή νέου αντικειμένου σε ένα κλιμακούμενο τμήμα - + Symbol not implemented. Using a default symbol. Το σύμβολο δεν έχει υλοποιηθεί. Χρησιμοποιήστε ένα προεπιλεγμένο σύμβολο. - + image is Null Η εικόνα είναι κενή - + filename does not exist on the system or in the resource file Το όνομα αρχείου δεν υπάρχει στο σύστημα ή στο αρχείο - + unable to load texture Αδυναμία φόρτωσης υφής - + Does not have 'ViewObject.RootNode'. Δεν έχει 'ViewObject.RootNode'. @@ -4035,12 +4036,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4048,13 +4049,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4564,8 +4565,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Cubic Bézier curve + Cubic Bézier Curve + Cubic Bézier Curve @@ -5181,38 +5182,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Σημεία: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Τοποθέτηση: - + Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Αδυναμία δημιουργίας σχήματος: @@ -8092,12 +8093,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8562,8 +8563,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index d0e30b6b6a..b4a485acb6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 3198fc215a..9472c6b163 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -1509,16 +1509,6 @@ Los objetos también pueden ser añadidos automáticamente a los grupos.Include groups in layer list Incluir grupos en la lista de capas - - - If checked, instructions are displayed in the Report view when using Draft commands - Si está marcado, las instrucciones se muestran en la vista de informe cuando se utilizan comandos de Draft - - - - Show prompts in the Report view - Mostrar sugerencias en la vista de informe - If checked, base objects, instead of created copies, are selected after copying @@ -1625,6 +1615,16 @@ accidentalmente y modificar el valor introducido. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1819,6 +1819,13 @@ definiciones de patrones para ser añadido a los patrones estándarDimension line overshoot Prolongación de línea de cota + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1854,13 +1861,6 @@ definiciones de patrones para ser añadido a los patrones estándarAnnotations Anotaciones - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Multiplicador de escala de anotación por defecto. Este es el inverso de la escala establecida -en el widget de escala de anotación. Si la escala es 1:100 el multiplicador es 100. - Font name @@ -2598,11 +2598,6 @@ Utilice la Draft ToggleGrid para cambiar esto para la vista activa.The maximum number of objects Draft Edit is allowed to process at the same time El número máximo de objetos Draft que Editar puede procesar al mismo tiempo - - - Only show the Draft snap toolbar during commands - Sólo mostrar la barra de herramientas de ajuste de Draft durante los comandos - Grid @@ -2875,16 +2870,6 @@ si coinciden con el eje X, Y o Z del sistema global de coordenadas Decrease radius Disminuir radio - - - If checked, the Draft snap toolbar will only be visible during commands - Si está marcado, la barra de herramientas de ajuste de Draft sólo será visible durante los comandos - - - - Show the Snap widget in the Draft Workbench - Mostrar el widget de ajuste en el banco de trabajo Draft - E @@ -3015,20 +3000,35 @@ si coinciden con el eje X, Y o Z del sistema global de coordenadas UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3634,44 +3634,44 @@ Intente mover el archivo DWG a un directorio cuyo camino no contenga espacios ni - + No active document. Aborting. No hay documento activo. Abortando. - + Wrong input: object {} not in document. Entrada incorrecta: el objeto {} no se encuentra en el documento. - + Unable to insert new object into a scaled part Imposible insertar un nuevo objeto en una parte escalada - + Symbol not implemented. Using a default symbol. Símbolo no implementado. Usando un símbolo por defecto. - + image is Null imagen nula - + filename does not exist on the system or in the resource file filename no existe en el sistema ni en el archivo de recursos - + unable to load texture imposible cargar la textura - + Does not have 'ViewObject.RootNode'. No tiene 'ViewObject.RootNode'. @@ -4045,12 +4045,12 @@ Intente mover el archivo DWG a un directorio cuyo camino no contenga espacios ni Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4058,13 +4058,13 @@ Intente mover el archivo DWG a un directorio cuyo camino no contenga espacios ni %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4574,8 +4574,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Curva de Bézier cúbica + Cubic Bézier Curve + Cubic Bézier Curve @@ -5191,38 +5191,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Puntos: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Emplazamiento: - + Wrong input: incorrect type of placement. Entrada incorrecta: tipo de emplazamiento incorrecto. - + Wrong input: incorrect type of points. Entrada incorrecta: tipo de puntos incorrecto. - + Cannot generate shape: No se puede generar forma: @@ -8101,12 +8101,12 @@ más allá de la línea de cota Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8571,8 +8571,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 2464cda9df..a2beccef4a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index 025e9b6daf..929cb987af 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -1506,16 +1506,6 @@ Objektuak taldeei ere automatikoki gehitu ahal zaizkie horrela. Include groups in layer list Sartu taldeak geruzen zerrendan - - - If checked, instructions are displayed in the Report view when using Draft commands - Markatuta badago, argibideak txosten-bistan bistaratuko dira zirriborro-komandoak erabiltzean - - - - Show prompts in the Report view - Erakutsi gonbitak txosten-bistan - If checked, base objects, instead of created copies, are selected after copying @@ -1622,6 +1612,16 @@ aldatu ez dadin. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1816,6 +1816,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Kota-lerroaren soberakina + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1851,13 +1858,6 @@ pattern definitions to be added to the standard patterns Annotations Oharpenak - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Font name @@ -2595,11 +2595,6 @@ Erabili zirriborroen sareta-txandakatzea hau bista aktiborako aldatzeko.The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2872,16 +2867,6 @@ koordenatu-sistema globalaren X, Y edo Z ardatzekin bat badatoz Decrease radius Txikitu erradioa - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3012,20 +2997,35 @@ koordenatu-sistema globalaren X, Y edo Z ardatzekin bat badatoz UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3632,44 +3632,44 @@ direktorio-bide batera, edo saiatu DGW bertsio zaharrago batean gordetzen. - + No active document. Aborting. Ez dago dokumentu aktiborik. Abortatzen. - + Wrong input: object {} not in document. Okerreko sarrera: {} objektua ez dago dokumentuan. - + Unable to insert new object into a scaled part Ezin izan da objektu berria txertatu eskalatutako piezan - + Symbol not implemented. Using a default symbol. Ikurra ez dago inplementatuta. Ikur lehenetsia erabiliko da. - + image is Null Irudia nulua da - + filename does not exist on the system or in the resource file Fitxategi-izena ez da existitzen sisteman edo baliabideen fitxategian - + unable to load texture Ezin da testura kargatu - + Does not have 'ViewObject.RootNode'. Ez dauka 'ViewObject.RootNode'. @@ -4043,12 +4043,12 @@ direktorio-bide batera, edo saiatu DGW bertsio zaharrago batean gordetzen.Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4056,13 +4056,13 @@ direktorio-bide batera, edo saiatu DGW bertsio zaharrago batean gordetzen.%1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4572,8 +4572,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Bézier kurba kubikoa + Cubic Bézier Curve + Cubic Bézier Curve @@ -5189,38 +5189,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Puntuak: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Kokapena: - + Wrong input: incorrect type of placement. Okerreko sarrera: kokapen mota okerra. - + Wrong input: incorrect type of points. Okerreko sarrera: puntu mota okerra. - + Cannot generate shape: Ezin da forma sortu: @@ -8102,12 +8102,12 @@ haratago duen luzera Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8572,8 +8572,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index 5a6322b8a5..edc3cb25ee 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index adbfc56ed7..f9a47c238e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -1505,16 +1505,6 @@ Objektit voidaan lisätä automaattisesti myös ryhmiin. Include groups in layer list Näytä ryhmät tasoluettelossa - - - If checked, instructions are displayed in the Report view when using Draft commands - Jos valittu, ohjeet näytetään raporttinäkymässä kun Draft -komentoja käytetään - - - - Show prompts in the Report view - Näytä kehotteet raporttinäkymässä - If checked, base objects, instead of created copies, are selected after copying @@ -1621,6 +1611,16 @@ vahingossa ja muuttamasta annettua arvoa. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1814,6 +1814,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Mittaviivan jatke + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1849,12 +1856,6 @@ pattern definitions to be added to the standard patterns Annotations Merkinnät - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Merkintöjen mittakaavan kerroin. Merkintöjen skaala- vimpaimessa asetetun asteikon käänteisarvo. Jos asteikko on 1:100, kerroin on 100. - Font name @@ -2591,11 +2592,6 @@ Käytä Ruudukko käytössä -painiketta vaihtaaksesi ruudukon näkymään tai p The maximum number of objects Draft Edit is allowed to process at the same time Maksimimäärä objekteja, joita voidaan muokata samaan aikaan - - - Only show the Draft snap toolbar during commands - Näytä kohdistamisen työkalupalkki vain komentojen aikana - Grid @@ -2868,16 +2864,6 @@ jos ne vastaavat globaalin koordinaattijärjestelmän X, Y tai Z -akseliaDecrease radius Pienennä sädettä - - - If checked, the Draft snap toolbar will only be visible during commands - Jos valittu, Draftin Tartunta -työkalupalkki näytetään vain komentojen aikana - - - - Show the Snap widget in the Draft Workbench - Näytä Tarttuminen -valinta tilarivillä - E @@ -3008,20 +2994,35 @@ jos ne vastaavat globaalin koordinaattijärjestelmän X, Y tai Z -akseliaUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Jos valittu, Tarttumisen valinta näytetään Draft -työtilassa tilarivillä + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3628,44 +3629,44 @@ tai yritä tallentaa alempaan DWG-versioon. - + No active document. Aborting. Ei aktiivista asiakirjaa. Keskeytetään. - + Wrong input: object {} not in document. Väärä syöte: objekti {} ei ole asiakirjassa. - + Unable to insert new object into a scaled part Uutta objektia ei voi lisätä skaalattuun osaan - + Symbol not implemented. Using a default symbol. Symbolia ei voi käytää. Käytetään oletussymbolia. - + image is Null kuva on Null - + filename does not exist on the system or in the resource file tiedostonimeä ei ole järjestelmässä tai resurssitiedostossa - + unable to load texture tekstuuria ei voitu ladata - + Does not have 'ViewObject.RootNode'. Objektilla ei ole 'ViewObject.RootNode'. @@ -4039,12 +4040,12 @@ tai yritä tallentaa alempaan DWG-versioon. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4052,13 +4053,13 @@ tai yritä tallentaa alempaan DWG-versioon. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4568,8 +4569,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Neljän pisteen Bézier-käyrä + Cubic Bézier Curve + Cubic Bézier Curve @@ -5185,38 +5186,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Pisteet: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Sijainti: - + Wrong input: incorrect type of placement. Väärä syöte: virheellinen sijoitustyyppi. - + Wrong input: incorrect type of points. Väärä syöte: väärä pistetyyppi. - + Cannot generate shape: Muotoa ei voi luoda: @@ -8091,12 +8092,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8561,8 +8562,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 8adef3a0c6..e7b761743b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 34b29ea2e6..10917392d1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -1505,17 +1505,6 @@ Les objets peuvent alors être automatiquement ajoutés aux groupes.Include groups in layer list Inclure des groupes dans la liste des calques - - - If checked, instructions are displayed in the Report view when using Draft commands - Si cette option est cochée, les instructions seront affichées dans -la vue rapport lors de l'utilisation des commandes de Draft. - - - - Show prompts in the Report view - Afficher les instructions dans la vue rapport - If checked, base objects, instead of created copies, are selected after copying @@ -1620,6 +1609,16 @@ pendant une seconde, afin d'éviter de déplacer la souris accidentellement et d Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1814,6 +1813,13 @@ contenant des définitions de motifs à ajouter aux motifs standard.Dimension line overshoot Dépassement des lignes de dimension + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1850,13 +1856,6 @@ sur plusieurs lignes (par rapport à la taille de la police) Annotations Annotations - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Facteur d'échelle d'annotation par défaut. C'est l'inverse de l'échelle définie dans le -widget d'échelle d'annotation du projet. Si l'échelle est 1:100, le facteur est 100. - Font name @@ -2594,11 +2593,6 @@ Utiliser Activer/désactiver la grille de Draft pour modifier ce paramètre pour The maximum number of objects Draft Edit is allowed to process at the same time Le nombre maximum d'objets éditables autorisé à être traités en même temps. - - - Only show the Draft snap toolbar during commands - Afficher la barre d'outils d'aimantation de Draft uniquement pendant les commandes - Grid @@ -2874,16 +2868,6 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. Decrease radius Diminuer un rayon - - - If checked, the Draft snap toolbar will only be visible during commands - Si cette option est cochée, la barre d'outils d'aimantation de Draft ne sera visible que pendant les commandes. - - - - Show the Snap widget in the Draft Workbench - Afficher le widget d'aimantation dans l'atelier Draft - E @@ -3014,20 +2998,35 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Si cette option est cochée, le widget d'aimantation sera affiché dans la barre d'état de Draft. + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3633,44 +3632,44 @@ Essayez de déplacer le fichier DWG vers un chemin d'accès sans espaces ni cara - + No active document. Aborting. Aucun document actif. Interruption. - + Wrong input: object {} not in document. Mauvaise saisie : l'objet {} n'est pas dans le document. - + Unable to insert new object into a scaled part Impossible d'insérer un nouvel objet dans une pièce redimensionnée - + Symbol not implemented. Using a default symbol. Symbole non implémenté. Un symbole par défaut est utilisé. - + image is Null l'image est vide - + filename does not exist on the system or in the resource file le nom du fichier n'existe ni dans le système ni dans le fichier source - + unable to load texture impossible de charger la texture - + Does not have 'ViewObject.RootNode'. N'a pas de "ViewObject.RootNode". @@ -4044,12 +4043,12 @@ Essayez de déplacer le fichier DWG vers un chemin d'accès sans espaces ni cara Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4057,13 +4056,13 @@ Essayez de déplacer le fichier DWG vers un chemin d'accès sans espaces ni cara %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4573,8 +4572,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Courbe de Bézier cubique + Cubic Bézier Curve + Cubic Bézier Curve @@ -5190,38 +5189,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Points : - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Emplacement : - + Wrong input: incorrect type of placement. Mauvaise saisie : type d'emplacement incorrect. - + Wrong input: incorrect type of points. Mauvaise saisie : type de points incorrect. - + Cannot generate shape: Impossible de générer une forme : @@ -8091,12 +8090,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8561,8 +8560,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index c5f02db8e8..1e88a64d83 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 584f638c00..b3d42b6b5a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -1525,16 +1525,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Uključi grupe u listu sloja - - - If checked, instructions are displayed in the Report view when using Draft commands - Ako je označeno, upute će se prikazati u prikazu izvješća pri korištenju naredbi nacrta - - - - Show prompts in the Report view - - If checked, base objects, instead of created copies, are selected after copying @@ -1641,6 +1631,16 @@ slučajno i mijenjanje unesene vrijednosti. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1835,6 +1835,13 @@ sadrže definicije uzoraka koje će se dodati standardnim uzorcima Dimension line overshoot Linija dimenzije prekoračenje + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1870,13 +1877,6 @@ sadrže definicije uzoraka koje će se dodati standardnim uzorcima Annotations Napomene - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Zadani množitelj skale oznake. Ovo je inverzna vrijednost skale postavljene u -skalarnoj oznaci . Ako je skala 1:100, množitelj je 100. - Font name @@ -2614,11 +2614,6 @@ Koristite Nacrt Pokaži/Sakrij rešetku za promjenu ove opcije za aktivni pogled Najveći broj objekata za uređivanje Nacrta koji se može istovremeno obraditi - - - Only show the Draft snap toolbar during commands - Prikaži samo alatnu traku Privuci na tijekom naredbi. - Grid @@ -2895,16 +2890,6 @@ ako odgovaraju osi X, Y ili Z globalnog koordinatnog sustava Decrease radius Smanji polumjer - - - If checked, the Draft snap toolbar will only be visible during commands - Ako je označeno, Nacrt-Uhvati alatna traka bit će vidljiva samo tijekom naredbi - - - - Show the Snap widget in the Draft Workbench - Prikaži dodatak Uhvati u radnom prostoru Nacrt - E @@ -3035,20 +3020,35 @@ ako odgovaraju osi X, Y ili Z globalnog koordinatnog sustava UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3655,44 +3655,44 @@ ili pokušajte spremiti u nižu DWG verziju. - + No active document. Aborting. Nema aktivnog dokumenta. Prekid. - + Wrong input: object {} not in document. Pogrešan unos: objekt {} nije u dokumentu. - + Unable to insert new object into a scaled part Nije moguće umetnuti novi objekt u skalirani dio - + Symbol not implemented. Using a default symbol. Simbol nije implementiran. Korištenje zadanog simbola. - + image is Null slika je Ništavna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sustavu ili u datoteci resursa - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Nema 'ViewObject.RootNode'. @@ -4066,12 +4066,12 @@ ili pokušajte spremiti u nižu DWG verziju. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4079,13 +4079,13 @@ ili pokušajte spremiti u nižu DWG verziju. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4595,8 +4595,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Kubična Bezierova krivulja + Cubic Bézier Curve + Cubic Bézier Curve @@ -5213,38 +5213,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Točke: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Postavljanje: - + Wrong input: incorrect type of placement. Pogrešan unos: netočna vrsta položaja. - + Wrong input: incorrect type of points. Pogrešan unos: netočna vrsta točaka. - + Cannot generate shape: Nije moguće generirati oblik: @@ -8133,12 +8133,12 @@ izvan linije dimenzije Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8603,8 +8603,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index e732003efa..0232231992 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 696b8967eb..898072cb86 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -1508,16 +1508,6 @@ Ekkor az objektumok automatikusan hozzáadhatók a csoportokhoz is.Include groups in layer list Csoportok felvétele a réteglistába - - - If checked, instructions are displayed in the Report view when using Draft commands - Ha bejelölt, akkor a Tervezet parancsok használatakor a jelentés nézetben utasítások jelennek meg - - - - Show prompts in the Report view - Azonnaliak megjelenítése a jelentésnézetben - If checked, base objects, instead of created copies, are selected after copying @@ -1624,6 +1614,16 @@ mozgatását és a beírt érték módosítását. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1818,6 +1818,13 @@ a szabványos mintákhoz hozzáadandó mintadefiníciókkal Dimension line overshoot Méret segédvonal túllépése + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1853,13 +1860,6 @@ a szabványos mintákhoz hozzáadandó mintadefiníciókkal Annotations Magyarázó szövegek - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - A megjegyzések alapértelmezett méretarány szorzója. A skála fordítottja, a -megjegyzések méretarány modulban beállított skálának. Ha a méretarány 1:100, a szorzó 100. - Font name @@ -2597,11 +2597,6 @@ A tervrajz rácskapcsoló segítségével ezt az aktív nézetre vonatkozóan m The maximum number of objects Draft Edit is allowed to process at the same time Objektumok maximális száma, amelyet a tervrajz szerkesztő egyszerre feldolgozhat - - - Only show the Draft snap toolbar during commands - Csak a tervrajz illeszt eszköztár megjelenítése a parancsok alatt - Grid @@ -2874,16 +2869,6 @@ ha a globális koordináta-rendszer X, Y vagy Z tengelyekkel megegyeznekDecrease radius Sugár csökkentése - - - If checked, the Draft snap toolbar will only be visible during commands - Ha bejelölt, a tervrajz illeszt eszköztár csak a parancsok alatt lesz látható - - - - Show the Snap widget in the Draft Workbench - Az illeszt modul megjelenítése a tervrajz munkafelületen - E @@ -3014,20 +2999,35 @@ ha a globális koordináta-rendszer X, Y vagy Z tengelyekkel megegyeznekUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Ha bejelölt, a illeszt modul megjelenik a tervrajz állapotsoron + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3634,44 +3634,44 @@ vagy próbáld meg alacsonyabb DWG verzióra menteni. - + No active document. Aborting. Nincs aktív dokumentum. Megszakítás. - + Wrong input: object {} not in document. Helytelen bemenet: {} objektum nincs a dokumentumban. - + Unable to insert new object into a scaled part Nem lehet új objektum elemet beszúrni egy méretezett alkatrészbe - + Symbol not implemented. Using a default symbol. A szimbólum nincs megvalósítva. Alapértelmezett szimbólum használata. - + image is Null a kép üres - + filename does not exist on the system or in the resource file a fájlnév nem létezik a rendszeren vagy a forrásfájlban - + unable to load texture anyagminta betöltése sikertelen - + Does not have 'ViewObject.RootNode'. Nincs 'ViewObject.RootNode'. @@ -4045,12 +4045,12 @@ vagy próbáld meg alacsonyabb DWG verzióra menteni. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4058,13 +4058,13 @@ vagy próbáld meg alacsonyabb DWG verzióra menteni. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4574,8 +4574,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Köbös bezier görbe + Cubic Bézier Curve + Cubic Bézier Curve @@ -5191,38 +5191,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Pontok: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Elhelyezés: - + Wrong input: incorrect type of placement. Helytelen bemenet: helytelen elhelyezés. - + Wrong input: incorrect type of points. Helytelen bemenet: helytelen pont. - + Cannot generate shape: Alakzat nem hozható létre: @@ -8101,12 +8101,12 @@ a méretvonalon túl Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8571,8 +8571,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 04adb15bdf..19e371b526 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index a39e22ef23..3e0e48d84c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -1513,16 +1513,6 @@ possono essere aggiunti automaticamente anche ai gruppi. Include groups in layer list Includi gruppi nella lista dei layer - - - If checked, instructions are displayed in the Report view when using Draft commands - Se selezionato, le istruzioni vengono visualizzate nella vista Report quando si usano i comandi Draft - - - - Show prompts in the Report view - Mostra le richieste nella vista Report - If checked, base objects, instead of created copies, are selected after copying @@ -1629,6 +1619,16 @@ accidentalmente e modificare il valore inserito. Command Options Opzioni di comando + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1823,6 +1823,13 @@ da aggiungere ai motivi standard Dimension line overshoot Estensione della linea di misura + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1858,13 +1865,6 @@ da aggiungere ai motivi standard Annotations Annotazioni - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Il moltiplicatore di scala di annotazione predefinito. Questo è l'inverso della scala -nel widget scala di annotazione. Se la scala è 1:100 il moltiplicatore è 100. - Font name @@ -2602,11 +2602,6 @@ Usa Draft Attiva/disattiva griglia per cambiarla per la vista attiva.The maximum number of objects Draft Edit is allowed to process at the same time Il numero massimo di oggetti che è consentito a Draft Modifica di elaborare allo stesso tempo - - - Only show the Draft snap toolbar during commands - Mostra la barra Draft aggancio solo durante i comandi - Grid @@ -2878,16 +2873,6 @@ se corrispondono agli assi X, Y o Z del sistema di coordinate globaliDecrease radius Diminuisci raggio - - - If checked, the Draft snap toolbar will only be visible during commands - Se selezionato, la barra degli strumenti di aggancio Draft sarà visibile solo durante i comandi - - - - Show the Snap widget in the Draft Workbench - Mostra il widget di Aggancio nell'ambiente di lavoro Draft - E @@ -3018,20 +3003,35 @@ se corrispondono agli assi X, Y o Z del sistema di coordinate globaliUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Se selezionato, il widget di aggancio viene visualizzato nella barra di stato Draft + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3185,7 +3185,7 @@ se corrispondono agli assi X, Y o Z del sistema di coordinate globali X coordinate of the point - X coordinate of the point + Coordinata X del punto @@ -3636,44 +3636,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Nessun documento attivo, operazione fallita. - + Wrong input: object {} not in document. Immissione errata: oggetto {} non nel documento. - + Unable to insert new object into a scaled part Impossibile inserire il nuovo oggetto in una parte scalata - + Symbol not implemented. Using a default symbol. Simbolo non implementato. Usare un simbolo predefinito. - + image is Null l'immagine è Null - + filename does not exist on the system or in the resource file il nome file non esiste nel sistema o nei file risorsa - + unable to load texture impossibile caricare la texture - + Does not have 'ViewObject.RootNode'. Non ha 'ViewObject.RootNode'. @@ -4047,12 +4047,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4060,13 +4060,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4576,8 +4576,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Curva di Bézier cubica + Cubic Bézier Curve + Cubic Bézier Curve @@ -5193,38 +5193,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Punti: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Posizionamento: - + Wrong input: incorrect type of placement. Input errato: tipo di posizionamento errato. - + Wrong input: incorrect type of points. Input errato: tipo di punti non corretto. - + Cannot generate shape: Impossibile generare la forma: @@ -6503,7 +6503,7 @@ If the "Copy" option is active, it creates displaced copies. Edits the active object - Edits the active object + Modifica l'oggetto attivo @@ -6609,7 +6609,7 @@ If the "Copy" option is active, it will create rotated copies. Creates an ellipse - Creates an ellipse + Crea un'ellisse @@ -7274,17 +7274,17 @@ Altrimenti le copie avranno lo stesso orientamento dell'oggetto Base originale.< Number of copies in X-direction - Number of copies in X-direction + Numero di copie in direzione X Number of copies in Y-direction - Number of copies in Y-direction + Numero di copie in direzione Y Number of copies in Z-direction - Number of copies in Z-direction + Numero di copie in direzione Z @@ -8097,12 +8097,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8567,8 +8567,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 8967dfc043..468f5a8c1c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 363775f153..109b3d5dba 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -1499,16 +1499,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list レイヤーリストにグループを含める - - - If checked, instructions are displayed in the Report view when using Draft commands - チェックされている場合、ドラフトコマンドの使用時にレポートビューに使用方法説明が表示されます。 - - - - Show prompts in the Report view - レポートビューにプロンプトを表示 - If checked, base objects, instead of created copies, are selected after copying @@ -1609,6 +1599,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1802,6 +1802,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot 寸法線の超過量 + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1837,12 +1844,6 @@ pattern definitions to be added to the standard patterns Annotations 注釈 - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - デフォルトの注釈スケールの倍率。これは注釈スケールウィジェットで設定された拡大縮小率の逆数です。スケールが1:100の場合、倍率は100になります。 - Font name @@ -2575,11 +2576,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time ドラフト編集で同時に処理できるオブジェクトの最大数 - - - Only show the Draft snap toolbar during commands - ドラフトスナップツールバーはコマンド中のみ表示 - Grid @@ -2851,16 +2847,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius 半径を小さくする - - - If checked, the Draft snap toolbar will only be visible during commands - チェックされている場合、ドラフトスナップツールバーはコマンド中にのみ表示されます - - - - Show the Snap widget in the Draft Workbench - ドラフトワークベンチにスナップウィジェットを表示 - E @@ -2991,20 +2977,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - チェックされている場合、スナップウィジェットがドラフトのステータスバーに表示されます。 + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3608,44 +3609,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. アクティブなドキュメントがありません。中止しています。 - + Wrong input: object {} not in document. 誤った入力: オブジェクト {} がドキュメント内にありません。 - + Unable to insert new object into a scaled part 拡大縮小したパーツに新しいオブジェクトを挿入できません。 - + Symbol not implemented. Using a default symbol. 記号が実装されていません。デフォルトの記号を使用しています。 - + image is Null 画像が未定義です。 - + filename does not exist on the system or in the resource file ファイル名がシステムまたはリソースファイルに存在しません。 - + unable to load texture テクスチャーを読み込めません。 - + Does not have 'ViewObject.RootNode'. 'ViewObject.RootNode' はありません。 @@ -4019,12 +4020,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4032,13 +4033,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4548,8 +4549,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - 3次ベジェ曲線 + Cubic Bézier Curve + Cubic Bézier Curve @@ -5165,38 +5166,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: 点: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: 配置: - + Wrong input: incorrect type of placement. 誤った入力: 配置タイプが正しくありません。 - + Wrong input: incorrect type of points. 誤った入力: 点タイプが正しくありません。 - + Cannot generate shape: シェイプを生成できません: @@ -8060,12 +8061,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8530,8 +8531,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.qm b/src/Mod/Draft/Resources/translations/Draft_ka.qm index ac365a3342..b3b5c2c602 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ka.qm and b/src/Mod/Draft/Resources/translations/Draft_ka.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index 0118456661..d6585cd883 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -197,7 +197,7 @@ Start arrow type - Start arrow type + დასაწყისი ისრის ტიპი @@ -214,7 +214,7 @@ Start arrow size - Start arrow size + დასაწყისი ისრის ზომა @@ -225,7 +225,7 @@ End arrow type - End arrow type + ბოლო ისრის ტიპი @@ -236,7 +236,7 @@ End arrow size - End arrow size + ბოლო ისრის ზომა @@ -551,7 +551,7 @@ Negative values will result in copies produced in the negative direction. Switch to Linear Mode - Switch to Linear Mode + გადართვა წრფივ რეჟიმზე @@ -576,7 +576,7 @@ Negative values will result in copies produced in the negative direction. Currently selected axis - Currently selected axis + ამჟამად მონიშნული ღერძი @@ -597,7 +597,7 @@ Negative values will result in copies produced in the negative direction. Resets the distances - Resets the distances + ჩამოყრის დაშორებებს @@ -799,7 +799,7 @@ Uncheck to use working plane coordinate system Resets the picked point - Resets the picked point + ჩამოყრის არჩეულ წერტილს @@ -852,7 +852,7 @@ Uncheck to use working plane coordinate system Working Plane Setup - Working Plane Setup + სამუშაო სიბრტყის მორგება @@ -1229,7 +1229,7 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. Start arrow type - Start arrow type + დასაწყისი ისრის ტიპი @@ -1264,17 +1264,17 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. Start arrow size - Start arrow size + დასაწყისი ისრის ზომა End arrow type - End arrow type + ბოლო ისრის ტიპი End arrow size - End arrow size + ბოლო ისრის ზომა @@ -1513,16 +1513,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list ჯგუფების ჩასმა ფენების სიაში - - - If checked, instructions are displayed in the Report view when using Draft commands - თუ ჩართულია, ინსტრუქციები, მონახაზის ბრძანებების გამოყენებისას ანგარიშის ხედში გამოჩნდება - - - - Show prompts in the Report view - კითხვების ჩვენება ანგარიშის ხედში - If checked, base objects, instead of created copies, are selected after copying @@ -1629,6 +1619,16 @@ accidentally and modifying the entered value. Command Options ბრძანების პარამეტრები + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1760,7 +1760,7 @@ pattern definitions to be added to the standard patterns Start arrow type - Start arrow type + დასაწყისი ისრის ტიპი @@ -1776,7 +1776,7 @@ pattern definitions to be added to the standard patterns Start arrow size - Start arrow size + დასაწყისი ისრის ზომა @@ -1786,7 +1786,7 @@ pattern definitions to be added to the standard patterns End arrow type - End arrow type + ბოლო ისრის ტიპი @@ -1796,7 +1796,7 @@ pattern definitions to be added to the standard patterns End arrow size - End arrow size + ბოლო ისრის ზომა @@ -1823,6 +1823,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot ზომის ხაზის გადახურვა + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1851,20 +1858,13 @@ pattern definitions to be added to the standard patterns Texts and Dimensions - Texts and Dimensions + ტექსტები და განზომილებები Annotations ანოტაციები - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - ანოტაციის მასშტაბის ნაგულისხმევი მამრავლი. ეს ანოტაციის მასშტაბის ვიჯეტში დაყენებული -მნიშვნელობის ინვერსიაა. თუ მასშტაბი 1:100-ია, მამრავლი 100-ის ტოლი იქნება. - Font name @@ -2047,7 +2047,7 @@ used for linear dimensions. Use original SVG style - Use original SVG style + ორიგინალი SVG სტილის გამოყენება @@ -2059,7 +2059,7 @@ One unit in the SVG file will be interpreted as one millimeter. Disable unit scaling - Disable unit scaling + საზომი ერთეულების მასშტაბირების გამორთვა @@ -2240,7 +2240,7 @@ a DXF file. Use legacy importer - Use legacy importer + მოძველებული შემომტანის გამოყენება @@ -2250,7 +2250,7 @@ a DXF file. Use legacy exporter - Use legacy exporter + მოძველებული გამტანის გამოყენება @@ -2347,7 +2347,7 @@ shape. Best for importing and viewing very large files with maximum performance. Global scaling factor - Global scaling factor + გლობალური მასშტაბის კოეფიციენტი @@ -2385,7 +2385,7 @@ only model space is imported Paper space objects - Paper space objects + ქაღალდის სივრცის ობიექტები @@ -2433,7 +2433,7 @@ the size defined in the DXF document. (Legacy importer only) Advanced processing - Advanced processing + დამატებითი დამუშავება @@ -2470,7 +2470,7 @@ instead of Draft or Part objects. This overrides the 'Import As' setting Maximum spline segment - Maximum spline segment + სპლაინის მაქს. სეგმენტები @@ -2514,7 +2514,7 @@ This might fail for post DXF R12 templates. Grid and Snapping - Grid and Snapping + ბადე და მიბმა @@ -2602,11 +2602,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time ობიექტების მაქსიმალური რაოდენობა, რომლების ერთდროულად დამუშავების უფლებაც აქვს მონახაზის ჩასწორებას - - - Only show the Draft snap toolbar during commands - ბრძანების შესრულებისას, მხოლოდ, მონახაზის მიმაგრების პანელის ჩვენება - Grid @@ -2879,16 +2874,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius რადიუსის შემცირება - - - If checked, the Draft snap toolbar will only be visible during commands - თუ ჩართულია, მონახაზის მიმაგრების პანელი, მხოლოდ, ბრძანების შესრულებისას იქნება ხილული - - - - Show the Snap widget in the Draft Workbench - მიბმის ვიჯეტის ჩვენება მონახაზის სამუშაო მაგიდაზე - E @@ -2927,7 +2912,7 @@ if they match the X, Y or Z axis of the global coordinate system In-Command Shortcuts - In-Command Shortcuts + ბრძანების რეჟიმის მალსახმობები @@ -3019,20 +3004,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options ინტერფეისის მორგება + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - თუ ჩართულია, მიბმის ვიჯეტი მონახაზის სტატუსის ზოლში იქნება ნაჩვენები + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3280,7 +3280,7 @@ if is the first point to set Locks the current angle - Locks the current angle + ჩაკეტავს მიმდინარე კუთხეს @@ -3312,7 +3312,7 @@ Uncheck to use working plane coordinate system Facebinder Elements - Facebinder Elements + წიბოზე ზედაპირების მიმაგრების ელემენტები @@ -3603,7 +3603,7 @@ or try saving to a lower DWG version. Draft Scale Widget A context menu action used to show or hide this toolbar widget - Draft Scale Widget + მონახაზის მასშტაბის ვიჯეტი @@ -3614,7 +3614,7 @@ or try saving to a lower DWG version. Draft Snap Widget A context menu action used to show or hide this toolbar widget - Draft Snap Widget + მონახაზის მდგომარეობის ღილაკის მიბმა @@ -3637,44 +3637,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. აქტიური დოკუმენტის გარეშე. გაუქმება. - + Wrong input: object {} not in document. არასწორი შეყვანა: ობიექტი {} დოკუმენტში არაა. - + Unable to insert new object into a scaled part მასშტაბირებად ნაწილში ახალი ობიექტის ჩასმა შეუძლებელია - + Symbol not implemented. Using a default symbol. სიმბოლო განხორციელებული არაა. გამოიყენება ნაგულისხმევი სიმბოლო. - + image is Null ნულოვანი გამოსახულება - + filename does not exist on the system or in the resource file ფაილი არ არსებობს არც სისტემაში არც რესურსის ფაილში - + unable to load texture ტექსტურის ჩატვირთვის შეცდომა - + Does not have 'ViewObject.RootNode'. არ აქვს 'ViewObject.RootNode'. @@ -3792,7 +3792,7 @@ or try saving to a lower DWG version. Edges do not intersect! - Edges do not intersect! + წიბოები არ იკვეთებიან! @@ -3967,12 +3967,12 @@ or try saving to a lower DWG version. %1 constrain - %1 constrain + %1 შეზღუდვა %1 snap - %1 snap + %1 მიმაგრება @@ -3982,7 +3982,7 @@ or try saving to a lower DWG version. %1 toggle relative - %1 toggle relative + %1 გადართვა შეფარდებით @@ -3992,7 +3992,7 @@ or try saving to a lower DWG version. %1 toggle continue - %1 toggle continue + %1 გადართვის გაგრძელება @@ -4039,7 +4039,7 @@ or try saving to a lower DWG version. %1 pick start angle - %1 pick start angle + %1 აირჩიეთ საწყისი კუთხე @@ -4048,12 +4048,12 @@ or try saving to a lower DWG version. რკალი 3 წერტილიდან - + Create Arc From 3 Points - Create Arc From 3 Points + რკალის შექმნა 3 წერტილით - + @@ -4061,15 +4061,15 @@ or try saving to a lower DWG version. %1 მიუთითეთ პირველი წერტილი - + %1 pick second point %1 მიუთითეთ მეორე წერტილი - + %1 pick third point - %1 pick third point + %1 აირჩიეთ მესამე წერტილი @@ -4104,7 +4104,7 @@ or try saving to a lower DWG version. Annotation Style Editor - Annotation Style Editor + ანოტაციის სტილის რედაქტორი @@ -4333,7 +4333,7 @@ The final angle will be the base angle plus this amount. Radius of the fillet - Radius of the fillet + მომრგვალებული ნაზოლის რადიუსი @@ -4552,7 +4552,7 @@ The final angle will be the base angle plus this amount. Selection is not a knot - Selection is not a knot + მონიშნული კვანძი არაა @@ -4573,11 +4573,11 @@ The final angle will be the base angle plus this amount. Create Bézier Curve - Create Bézier Curve + ბეზიეს მრუდის შექმნა - Cubic Bézier curve + Cubic Bézier Curve კუბური ბეზიეს მრუდი @@ -4617,7 +4617,7 @@ The final angle will be the base angle plus this amount. %1 pick opposite point - %1 pick opposite point + %1 საპირისპირო წერტილის არჩევა @@ -4832,7 +4832,7 @@ The final angle will be the base angle plus this amount. Create Polar Array - Create Polar Array + პოლარული მასივის შექმნა @@ -4880,13 +4880,13 @@ The final angle will be the base angle plus this amount. Create Orthogonal Array - Create Orthogonal Array + ორთოგონალური მასივის შექმნა Create link array: - Create link array: + ბმულების მასივის შექმნა: @@ -4921,7 +4921,7 @@ The final angle will be the base angle plus this amount. Switch to Ortho Mode - Switch to Ortho Mode + გადართვა ორთოგონალურ რეჟიმზე @@ -4944,7 +4944,7 @@ The final angle will be the base angle plus this amount. Switch to Linear Mode - Switch to Linear Mode + გადართვა წრფივ რეჟიმზე @@ -5013,7 +5013,7 @@ The final angle will be the base angle plus this amount. Create Circular Array - Create Circular Array + მრგვალი მასივის შექმნა @@ -5048,7 +5048,7 @@ The final angle will be the base angle plus this amount. Font file not found - Font file not found + ფონტის ფაილი აღმოჩენილი არაა @@ -5089,7 +5089,7 @@ The final angle will be the base angle plus this amount. migrated view properties - migrated view properties + მიგრირებული ხედის თვისება @@ -5194,38 +5194,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: წერტილები: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: მდებარეობა: - + Wrong input: incorrect type of placement. არასწორი შეყვანა: განლაგების არასწორი ტიპი. - + Wrong input: incorrect type of points. არასწორი შეყვანა: წერტილების არასწორი ტიპი. - + Cannot generate shape: მოხაზულობის გენერაცია შეუძლებელია: @@ -5739,12 +5739,12 @@ The final angle will be the base angle plus this amount. Opening Multiple Links - Opening Multiple Links + გაიხსნება ერთზე მეტი ბმული Multiple links found - Multiple links found + აღმოჩენილია ერთზე მეტი ბმული @@ -5877,7 +5877,7 @@ of existing objects in all opened documents? Create Point Array - Create Point Array + წერტილების მასივის შექმნა @@ -5892,7 +5892,7 @@ of existing objects in all opened documents? No active Draft toolbar - No active Draft toolbar + აქტიური მონახაზის ხელსაწყოების ზოლის გარეშე @@ -5902,12 +5902,12 @@ of existing objects in all opened documents? Toggle Display Mode - Toggle Display Mode + ჩვენების რეჟიმის გადართვა 2 edges are needed - 2 edges are needed + საჭიროა ორი წიბო @@ -5947,7 +5947,7 @@ of existing objects in all opened documents? Select Layer Contents - Select Layer Contents + აირჩიეთ ფენის შემცელობა @@ -5964,7 +5964,7 @@ of existing objects in all opened documents? Merge Layer Duplicates - Merge Layer Duplicates + ფენის დუბლიკატების შერწყმა @@ -5988,7 +5988,7 @@ To enabled FreeCAD to download these libraries, answer Yes. PAT file not found - PAT file not found + PAT ფაილი ვერ მოიძებნა @@ -6008,7 +6008,7 @@ To enabled FreeCAD to download these libraries, answer Yes. removed view properties - removed view properties + წაშლილი ხედის თვისება @@ -6026,7 +6026,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Draft Modification - Draft Modification + მონახაზის მოდიფიკაცია @@ -6099,7 +6099,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Name of this new style - Name of this new style + ამ ახალი სტილის სახელი @@ -6184,7 +6184,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick From/To Points - Pick From/To Points + აირჩიეთ საწყისი და საბოლოო წერტილები @@ -6409,7 +6409,7 @@ from menu Tools → Addon Manager Creates a 2-point line - Creates a 2-point line + ქმნის 2-წერტილიან ხაზს @@ -6422,7 +6422,7 @@ from menu Tools → Addon Manager Creates a polyline - Creates a polyline + შექმნის პოლიხაზს @@ -6504,7 +6504,7 @@ If the "Copy" option is active, it creates displaced copies. Edits the active object - Edits the active object + ჩაასწორებს აქტიურ ობიექტს @@ -6610,7 +6610,7 @@ If the "Copy" option is active, it will create rotated copies. Creates an ellipse - Creates an ellipse + შექმნის ოვალს @@ -6918,7 +6918,7 @@ set True for fusion or False for compound Always create a compound - Always create a compound + ყოველთვის შეიქმნას გადაბმა @@ -7207,7 +7207,7 @@ To get better results with 'Original' or 'Tangent' you may have to set 'Force Ve Walk the path backwards. - Walk the path backwards. + ტრაექტორიის უკუგავლა. @@ -8099,12 +8099,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools რკალის ხელსაწყოები - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8140,7 +8140,7 @@ beyond the dimension line Cubic Bézier Curve - Cubic Bézier Curve + კუბური ბეზიეს მრუდი @@ -8300,7 +8300,7 @@ The construction group is created if it does not exist. Opens linked documents - Opens linked documents + გახსნის მიბმულ დოკუმენტებს @@ -8381,7 +8381,7 @@ straight Draft lines that are drawn on the XY-plane. Twisted Path Array - Twisted Path Array + დახვეული ბილიკების მასივი @@ -8394,7 +8394,7 @@ straight Draft lines that are drawn on the XY-plane. Twisted Path Link Array - Twisted Path Link Array + დახვეული ბილიკის ბმულების მასივი @@ -8407,7 +8407,7 @@ straight Draft lines that are drawn on the XY-plane. Working Plane Proxy - Working Plane Proxy + სამუშაო სიბრტყის პროქსი @@ -8433,7 +8433,7 @@ straight Draft lines that are drawn on the XY-plane. Point Link Array - Point Link Array + წერტილების მასივების მიბმა @@ -8539,7 +8539,7 @@ The initial projection direction is the opposite of the current active view dire Snap Perpendicular - Snap Perpendicular + მართკუთხად მიმაგრება @@ -8569,8 +8569,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge @@ -8695,7 +8695,7 @@ The initial projection direction is the opposite of the current active view dire Snap Working Plane - Snap Working Plane + სამუშაო სიბრტყის მიმაგრება @@ -8734,7 +8734,7 @@ The initial projection direction is the opposite of the current active view dire Apply Current Style - Apply Current Style + მიმდინარე სტილის გადატარება @@ -8747,7 +8747,7 @@ The initial projection direction is the opposite of the current active view dire Highlight Subelements - Highlight Subelements + ქვეელემენტების გამოკვეთა @@ -8786,7 +8786,7 @@ The initial projection direction is the opposite of the current active view dire Convert Wire/B-Spline - Convert Wire/B-Spline + პოლიხაზის/B-სპლაინის გადაყვანა @@ -8820,7 +8820,7 @@ workbench. Editable Draft objects - Editable Draft objects + ჩასწორებადი მონახაზი ობიექტები diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index c88f689c1b..965f2180f1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index 0a8ad173e7..07b1501d78 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -1510,16 +1510,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Include groups in layer list - - - If checked, instructions are displayed in the Report view when using Draft commands - If checked, instructions are displayed in the Report view when using Draft commands - - - - Show prompts in the Report view - Show prompts in the Report view - If checked, base objects, instead of created copies, are selected after copying @@ -1626,6 +1616,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1820,6 +1820,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Dimension line overshoot + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1855,13 +1862,6 @@ pattern definitions to be added to the standard patterns Annotations 주석 - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Font name @@ -2599,11 +2599,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2876,16 +2871,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Decrease radius - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3016,20 +3001,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3636,44 +3636,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. 잘못된 입력: 대상체 {}가 문서에 없습니다. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null 화상이 비어 있음 - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4047,12 +4047,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4060,13 +4060,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4576,8 +4576,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Cubic Bézier curve + Cubic Bézier Curve + Cubic Bézier Curve @@ -5193,38 +5193,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Points: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Placement: - + Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Cannot generate shape: @@ -8106,12 +8106,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8576,8 +8576,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index 1ed5006959..252b585769 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index c5bd528747..15c13e855d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -1502,16 +1502,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Include groups in layer list - - - If checked, instructions are displayed in the Report view when using Draft commands - If checked, instructions are displayed in the Report view when using Draft commands - - - - Show prompts in the Report view - Show prompts in the Report view - If checked, base objects, instead of created copies, are selected after copying @@ -1618,6 +1608,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1812,6 +1812,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Afmetingslijnoverschrijding + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1847,13 +1854,6 @@ pattern definitions to be added to the standard patterns Annotations Aantekeningen - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Font name @@ -2591,11 +2591,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2868,16 +2863,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Decrease radius - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3008,20 +2993,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3626,44 +3626,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4037,12 +4037,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4050,13 +4050,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4566,8 +4566,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Cubic Bézier curve + Cubic Bézier Curve + Cubic Bézier Curve @@ -5183,38 +5183,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Punten: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Placement: - + Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Kan geen vorm genereren: @@ -8096,12 +8096,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8566,8 +8566,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index e9e30e6e2b..eeb8099b06 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 6b1ec22f8c..7d70de5041 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -583,9 +583,9 @@ Przy wartościach ujemnych kopie tworzone będą w kierunku przeciwnym.Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the X-direction. -Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Odległość między elementami w kierunku X. +Zazwyczaj tylko wartość X jest potrzebna; podanie pozostałych dwóch wartości spowoduje dodatkowe przesunięcie w danych kierunkach. +Przy wartościach ujemnych kopie tworzone będą w kierunku przeciwnym. @@ -604,9 +604,9 @@ Negative values will result in copies produced in the negative direction.Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. - Distance between the elements in the Y-direction. -Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. -Negative values will result in copies produced in the negative direction. + Odległość między elementami w kierunku Y. +Zazwyczaj tylko wartość Y jest potrzebna; podanie pozostałych dwóch wartości spowoduje dodatkowe przesunięcie w danych kierunkach. +Przy wartościach ujemnych kopie tworzone będą w kierunku przeciwnym. @@ -1014,7 +1014,7 @@ zostanie przeniesiona do środka widoku. The number of squares in the X- and Y-direction of the grid - The number of squares in the X- and Y-direction of the grid + Liczba pól w kierunku X i Y siatki @@ -1510,16 +1510,6 @@ Obiekty mogą być automatycznie dodawane do grup. Include groups in layer list Dołącz grupy do listy warstw - - - If checked, instructions are displayed in the Report view when using Draft commands - Jeśli ta opcja jest zaznaczona, instrukcje są wyświetlane w widoku Raportu podczas używania poleceń środowiska Rysunek Roboczy - - - - Show prompts in the Report view - Pokaż powiadomienia w oknie Widoku raportu - If checked, base objects, instead of created copies, are selected after copying @@ -1628,6 +1618,16 @@ aby uniknąć przypadkowego poruszenia myszą i modyfikacji wprowadzonej wartoś Command Options Opcje polecenia + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1822,6 +1822,13 @@ definicje wzorów, do dodania do standardowych wzorów Dimension line overshoot Przedłużenie linii wymiaru + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1857,13 +1864,6 @@ definicje wzorów, do dodania do standardowych wzorów Annotations Adnotacje - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Domyślny mnożnik skali adnotacji. Jest to odwrotność skali ustawionej -w widżecie Skala adnotacji. Jeśli skala wynosi 1:100, mnożnik wynosi 100. - Font name @@ -2464,13 +2464,13 @@ instead of Draft or Part objects. This overrides the 'Import As' setting Create sketches - Create sketches + Utwórz szkic Export Options - Export Options + Opcje eksportu @@ -2519,7 +2519,7 @@ Eksport może zawieść w przypadku szablonów DXF w wersji nowszej od R12. Grid and Snapping - Grid and Snapping + Siatka i przyciąganie @@ -2549,7 +2549,7 @@ Główne linie siatki są grubsze niż linie pomocnicze. Snapping and Modifier Keys - Snapping and Modifier Keys + Przyciąganie i klawisze modyfikujące @@ -2607,12 +2607,6 @@ Przełącz widoczność siatki środowiska Rysunek Roboczy, aby zmienić to dla The maximum number of objects Draft Edit is allowed to process at the same time Ustawia maksymalną liczbę obiektów do edycji środowiska Rysunek Roboczy, jaką można przetwarzać w tym samym czasie - - - Only show the Draft snap toolbar during commands - Pasek narzędzi przyciągania środowiska Rysunek Roboczy -jest wyświetlany tylko podczas wykonywania poleceń - Grid @@ -2678,7 +2672,7 @@ jeśli pasują do osi X, Y lub Z globalnego układu współrzędnych. The number of squares in the X- and Y-direction of the grid - The number of squares in the X- and Y-direction of the grid + Liczba pól w kierunku X i Y siatki @@ -2698,7 +2692,7 @@ jeśli pasują do osi X, Y lub Z globalnego układu współrzędnych. The constrain modifier key - The constrain modifier key + Klawisz zmieniający przyciąganie @@ -2764,12 +2758,12 @@ jeśli pasują do osi X, Y lub Z globalnego układu współrzędnych. DWG Conversion - DWG Conversion + Konwersja DWG Conversion method - Conversion method + Metoda konwersji @@ -2886,17 +2880,6 @@ jeśli pasują do osi X, Y lub Z globalnego układu współrzędnych.Decrease radius Zmniejsz promień - - - If checked, the Draft snap toolbar will only be visible during commands - Jeśli ta opcja jest zaznaczona, pasek narzędzi przyciągania -będzie widoczny tylko podczas wykonywania poleceń - - - - Show the Snap widget in the Draft Workbench - Pokaż widżet przyciągania środowiska Rysunek Roboczy - E @@ -3027,20 +3010,35 @@ będzie widoczny tylko podczas wykonywania poleceń UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Jeśli ta opcja jest zaznaczona, widżet przyciągania jest wyświetlany na pasku stanu środowiska Rysunek Roboczy + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3263,12 +3261,12 @@ jeśli jest to pierwszy punkt do ustawienia Y coordinate of the point - Y coordinate of the point + Współrzędna Y punktu Z coordinate of the point - Z coordinate of the point + Współrzędna Z punktu @@ -3278,17 +3276,17 @@ jeśli jest to pierwszy punkt do ustawienia Length of the current segment - Length of the current segment + Długość aktualnego odcinka Angle of the current segment - Angle of the current segment + Kąt bieżącego segmentu Locks the current angle - Locks the current angle + Blokuje bieżący kąt @@ -3315,7 +3313,7 @@ Należy usunąć zaznaczenie, aby używać układu współrzędnych płaszczyzny Modify Objects - Modify Objects + Modyfikuj obiekty @@ -3647,44 +3645,44 @@ lub spróbuj zapisać do niższej wersji DWG. - + No active document. Aborting. Brak aktywnego dokumentu — przerwano. - + Wrong input: object {} not in document. Nieprawidłowe dane wejściowe: obiektu {} nie ma w dokumencie. - + Unable to insert new object into a scaled part Nie można wstawić nowego obiektu do przeskalowanej części - + Symbol not implemented. Using a default symbol. Symbol nie został zaimplementowany. Użyj symbolu domyślnego. - + image is Null brak obrazu - + filename does not exist on the system or in the resource file nazwa pliku nie istnieje w systemie lub w zasobach - + unable to load texture nie można załadować tekstury - + Does not have 'ViewObject.RootNode'. Nie ma "ViewObject.RootNode". @@ -3862,7 +3860,7 @@ przyciągnij do pierwszego punktu, aby zamknąć Join Lines - Join Lines + Złącz linie @@ -4057,15 +4055,15 @@ przyciągnij do pierwszego punktu, aby zamknąć Arc From 3 Points - Arc From 3 Points + Łuk przez 3 punkty - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4073,13 +4071,13 @@ przyciągnij do pierwszego punktu, aby zamknąć %1 wybierz pierwszy punkt - + %1 pick second point %1 wybierz kolejny punkt - + %1 pick third point %1 wybierz trzeci punkt @@ -4116,7 +4114,7 @@ przyciągnij do pierwszego punktu, aby zamknąć Annotation Style Editor - Annotation Style Editor + Edytor stylów wymiarowania @@ -4591,8 +4589,8 @@ Zaznacz grupy, które nie są puste lub obiekty wewnątrz grup. - Cubic Bézier curve - Sześcienna krzywa Béziera + Cubic Bézier Curve + Cubic Bézier Curve @@ -5209,38 +5207,38 @@ Przerwano działanie. All shapes must be planar - - + + Points: Punkty: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Umiejscowienie: - + Wrong input: incorrect type of placement. Nieprawidłowe dane wejściowe: nieprawidłowy typ umiejscowienia. - + Wrong input: incorrect type of points. Nieprawidłowe dane wejściowe: nieprawidłowy typ punktów. - + Cannot generate shape: Nie można wygenerować kształtu: @@ -5823,12 +5821,12 @@ istniejących obiektów we wszystkich otwartych dokumentach? Remove From Layer - Remove From Layer + Usuń z warstwy Add to New Layer - Add to New Layer + Dodaj do nowej warstwy @@ -5904,7 +5902,7 @@ istniejących obiektów we wszystkich otwartych dokumentach? Split Line - Split Line + Podziel linię @@ -5924,12 +5922,12 @@ istniejących obiektów we wszystkich otwartych dokumentach? 2 edges are needed - 2 edges are needed + Potrzebne są dwie krawędzie Edges are not connected or radius is too large - Edges are not connected or radius is too large + Krawędzie nie są połączone lub promień jest zbyt duży @@ -6532,7 +6530,7 @@ If the "Copy" option is active, it creates displaced copies. Creates a point - Creates a point + Utwórz punkt @@ -6546,8 +6544,8 @@ If the "Copy" option is active, it creates displaced copies. Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. - Rotates the selected objects. -If the "Copy" option is active, it will create rotated copies. + Obraca wybrane obiekty. +Jeśli opcja "Kopiuj" jest aktywna, to utworzy obracane kopie. @@ -6560,7 +6558,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a fillet between 2 selected edges - Creates a fillet between 2 selected edges + Tworzy zaokrąglenie pomiędzy dwoma wybranymi krawędziami @@ -6573,7 +6571,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a regular polygon (triangle, square, pentagon…) - Creates a regular polygon (triangle, square, pentagon…) + Tworzy wielokąt regularny (trójkąt, kwadrat, pięciokąt…) @@ -6586,7 +6584,7 @@ If the "Copy" option is active, it will create rotated copies. Splits the selected line or polyline at a specified point - Splits the selected line or polyline at a specified point + Dzieli zaznaczoną linię lub polilinię w określonym punkcie @@ -6612,7 +6610,7 @@ If the "Copy" option is active, it will create rotated copies. Creates a circle (full circular arc) - Creates a circle (full circular arc) + Tworzy okrąg (pełny łuk kołowy) @@ -7184,7 +7182,7 @@ Pozostawienie pustej właściwości spowoduje tworzenie kopii wzdłuż całego " Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode - Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode + Wymuś użycie "Wektora pionowego" jako lokalnego kierunku Z podczas używania trybu wyrównywania "Oryginalny" lub "Styczny" @@ -7293,32 +7291,32 @@ W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginaln Number of copies in X-direction - Number of copies in X-direction + Liczba kopii w kierunku X Number of copies in Y-direction - Number of copies in Y-direction + Liczba kopii w kierunku Y Number of copies in Z-direction - Number of copies in Z-direction + Liczba kopii w kierunku Z Distance and orientation of intervals in X-direction - Distance and orientation of intervals in X-direction + Dystans i orientacja interwałów w kierunku X Distance and orientation of intervals in Y-direction - Distance and orientation of intervals in Y-direction + Dystans i orientacja interwałów w kierunku Y Distance and orientation of intervals in Z-direction - Distance and orientation of intervals in Z-direction + Dystans i orientacja interwałów w kierunku Z @@ -8121,12 +8119,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Narzędzia łuku - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8218,7 +8216,7 @@ If other objects are selected they are ignored. Draft to Sketch - Draft to Sketch + Rysunek roboczy do szkicu @@ -8248,7 +8246,7 @@ However, a single sketch with disconnected traces is converted into several indi Add to Group… - Add to Group… + Dodaj do grupy ... @@ -8261,12 +8259,14 @@ However, a single sketch with disconnected traces is converted into several indi Select Group - Select Group + Wybierz grupę Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. - Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. + Wybiera zawartość zaznaczonych grup. +W przypadku wybranych obiektów spoza grupy +wybierana jest zawartość grupy, w której się znajdują. @@ -8274,12 +8274,12 @@ However, a single sketch with disconnected traces is converted into several indi Auto-Group - Auto-Group + Auto-grupowanie Adds new Draft and BIM objects to the selected layer or group - Adds new Draft and BIM objects to the selected layer or group + Dodaje nowe obiekty Draft i BIM do wybranej warstwy lub grupy @@ -8343,7 +8343,7 @@ The construction group is created if it does not exist. Manage Layers - Manage Layers + Zarządzaj warstwami @@ -8591,8 +8591,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 85e110c087..0db47fd8ae 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index d6a90634a1..8eae14df54 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -1505,16 +1505,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Incluir grupos na lista de camadas - - - If checked, instructions are displayed in the Report view when using Draft commands - Se marcada, as instruções são exibidas na Vista de Relatório ao usar comandos de Rascunho - - - - Show prompts in the Report view - Mostrar avisos na visualização de relatório - If checked, base objects, instead of created copies, are selected after copying @@ -1616,6 +1606,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1810,6 +1810,13 @@ a serem adicionadas aos padrões de base Dimension line overshoot Ultrapassagem da linha de dimensão + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1845,13 +1852,6 @@ a serem adicionadas aos padrões de base Annotations Anotações - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - O multiplicador padrão de escala de anotação. Isso é o inverso do conjunto de escala -no widget da escala de anotação. Se a escala for de 1:100, o multiplicador será de 100. - Font name @@ -2588,11 +2588,6 @@ Use o comando Draft ToggleGrid para mudar isto na vista atual. The maximum number of objects Draft Edit is allowed to process at the same time O número máximo de objetos que podem ser editados pelo modo de edição do Draft ao mesmo tempo - - - Only show the Draft snap toolbar during commands - Mostrar a barra de ferramentas de snap somente durante comandos - Grid @@ -2865,16 +2860,6 @@ correspondendo aos eixos X, Y ou Z do sistema de coordenadas globalDecrease radius Diminuir raio - - - If checked, the Draft snap toolbar will only be visible during commands - Se ativado, a barra de ferramentas de snap só será visível durante os comandos - - - - Show the Snap widget in the Draft Workbench - Mostrar o widget de snap na bancada Draft - E @@ -3005,20 +2990,35 @@ correspondendo aos eixos X, Y ou Z do sistema de coordenadas globalUI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3624,44 +3624,44 @@ Tente mover o arquivo DWG para um caminho de diretório sem espaços e caractere - + No active document. Aborting. Nenhum documento ativo. Abortando. - + Wrong input: object {} not in document. Entrada errada: o objeto {} não está no documento. - + Unable to insert new object into a scaled part Não foi possível inserir novo objeto em uma peça em escala - + Symbol not implemented. Using a default symbol. Símbolo não implementado. Usando um símbolo padrão. - + image is Null imagem é nula - + filename does not exist on the system or in the resource file nome do arquivo não existe no sistema ou no arquivo de recursos - + unable to load texture não foi possível carregar a textura - + Does not have 'ViewObject.RootNode'. Não tem 'ViewObject.RootNode'. @@ -4035,12 +4035,12 @@ Tente mover o arquivo DWG para um caminho de diretório sem espaços e caractere Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4048,13 +4048,13 @@ Tente mover o arquivo DWG para um caminho de diretório sem espaços e caractere %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4564,8 +4564,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Curva de Bézier cúbica + Cubic Bézier Curve + Cubic Bézier Curve @@ -5181,38 +5181,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Pontos: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Posicionamento: - + Wrong input: incorrect type of placement. Entrada errada: tipo incorreto de posicionamento. - + Wrong input: incorrect type of points. Entrada errada: tipo incorreto de pontos. - + Cannot generate shape: Não é possível gerar uma forma: @@ -8092,12 +8092,12 @@ além da linha de cota Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8562,8 +8562,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index f271785f69..da3e7260b9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 5d16e4a49e..d5da1d23ab 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -1506,16 +1506,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Include groups in layer list - - - If checked, instructions are displayed in the Report view when using Draft commands - If checked, instructions are displayed in the Report view when using Draft commands - - - - Show prompts in the Report view - Show prompts in the Report view - If checked, base objects, instead of created copies, are selected after copying @@ -1622,6 +1612,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1816,6 +1816,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Dimensiunea liniei depăşiri + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1851,13 +1858,6 @@ pattern definitions to be added to the standard patterns Annotations Annotations (Automatic Copy) - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Font name @@ -2595,11 +2595,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2872,16 +2867,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Decrease radius - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3012,20 +2997,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3632,44 +3632,44 @@ sau încercați să salvați într-o versiune DWG mai mică. - + No active document. Aborting. Niciun document activ. Abandonat. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Imposibil de inserat un obiect nou într-o parte scalată - + Symbol not implemented. Using a default symbol. Simbol neimplementat. Folosind un simbol implicit. - + image is Null imaginea este nulă - + filename does not exist on the system or in the resource file numele fișierului nu există în sistem sau în fișierul de resurse - + unable to load texture nu se poate încărca textura - + Does not have 'ViewObject.RootNode'. Nu are 'ViewObject.RootNode'. @@ -4043,12 +4043,12 @@ sau încercați să salvați într-o versiune DWG mai mică. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4056,13 +4056,13 @@ sau încercați să salvați într-o versiune DWG mai mică. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4572,8 +4572,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Cubic Bézier curve + Cubic Bézier Curve + Cubic Bézier Curve @@ -5189,38 +5189,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Points: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Placement: - + Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Cannot generate shape: @@ -8102,12 +8102,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8572,8 +8572,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 5a5b434c8d..3d2302c7d8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 19c38419c4..e864ff60b4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -1506,16 +1506,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Включить группы в список слоев - - - If checked, instructions are displayed in the Report view when using Draft commands - Если флажок установлен, инструкции отображаются в отчете при использовании команды Draft - - - - Show prompts in the Report view - Показывать подсказки в просмотре отчета - If checked, base objects, instead of created copies, are selected after copying @@ -1621,6 +1611,16 @@ accidentally and modifying the entered value. Command Options Параметры команды + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1814,6 +1814,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Нахлёст размерной линии + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1849,13 +1856,6 @@ pattern definitions to be added to the standard patterns Annotations Заметки - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Множитель масштаба аннотаций по умолчанию. Это инверсия масштабного набора -в виджете Масштаб аннотаций. Если масштаб 1:100, множитель равен 100. - Font name @@ -2593,11 +2593,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time Максимальное количество объектов, которые Draft Edit может обрабатываться одновременно - - - Only show the Draft snap toolbar during commands - Показывать панель инструментов «Привязка» только во время команд - Grid @@ -2870,16 +2865,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Уменьшить радиус - - - If checked, the Draft snap toolbar will only be visible during commands - Если этот флажок установлен, панель инструментов «Привязка уклона» будет видна только во время выполнения команд - - - - Show the Snap widget in the Draft Workbench - Показать виджет Привязка в Draft Workbench - E @@ -3010,20 +2995,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options Настройки интерфейса + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Если этот флажок установлен, виджет «Привязка» отображается в строке состояния «Черновик» + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - Если этот флажок установлен, виджет «Масштаб аннотаций» отображается в строке состояния «Чертеж» + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Отображение виджета «Масштаб аннотаций» в верстаке Draft + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3627,44 +3627,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Нет активного документа. Прерывание. - + Wrong input: object {} not in document. "Неправильный ввод: объект не является документом". - + Unable to insert new object into a scaled part Невозможно вставить новый объект в масштабированную деталь - + Symbol not implemented. Using a default symbol. Символ не поддерживается. Испольуйте базовые символы. - + image is Null изображение пустое - + filename does not exist on the system or in the resource file имя файла не существует в системе или в файле ресурсов - + unable to load texture невозможно загрузить текстуру - + Does not have 'ViewObject.RootNode'. Не имеет 'ViewObject.RootNode'. @@ -4038,12 +4038,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Создать дугу из 3 точек - + @@ -4051,13 +4051,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4567,7 +4567,7 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve + Cubic Bézier Curve Кубическая кривая Безье @@ -5184,38 +5184,38 @@ The final angle will be the base angle plus this amount. Все фигуры должны лежать в одной плоскости - - + + Points: Точки: - + Wrong input: must be a list or tuple of 3 points exactly. Неверный ввод: должен быть список или кортеж из ровно 3 точек. - + Wrong input: must be list or tuple of 3 points exactly. Неправильный ввод: должен быть список или кортеж ровно из трех точек. - + Placement: Расположение: - + Wrong input: incorrect type of placement. Неверный ввод: неверный тип размещения. - + Wrong input: incorrect type of points. Неправильный ввод: неверный тип точек. - + Cannot generate shape: Невозможно создать форму: @@ -8090,12 +8090,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Инструменты дуги - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8560,8 +8560,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 519996dcc8..2443a6568f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index 1b8ca4780b..ed8d7c8125 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -1509,16 +1509,6 @@ V tem primeru je tudi mogoče predmete samodejno dodati skupinam. Include groups in layer list Vključi v seznam plasti tudi skupine - - - If checked, instructions are displayed in the Report view when using Draft commands - Če je označeno, se navodila med izvajanje ukazov Risarja (Draft) izpišejo v poročevalnem pogledu - - - - Show prompts in the Report view - Prikaži pozive v poročevalnem pogledu - If checked, base objects, instead of created copies, are selected after copying @@ -1625,6 +1615,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1819,6 +1819,13 @@ kateri bodo dodani med stalne vzorce Dimension line overshoot Prekoračitev kotirne črte + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1854,13 +1861,6 @@ kateri bodo dodani med stalne vzorce Annotations Pripisi - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Privzeti množilnik velikosti pripisov je obratna vrednost merila, nastavljenega -v Gradniku velikosti pripisov. Če je merilo 1:100, je množilnik 100. - Font name @@ -2595,11 +2595,6 @@ To lahko za dejavno okno spremenite v Risarjevem (Draft) ukazu PreklopiMrežo.The maximum number of objects Draft Edit is allowed to process at the same time Največje število predmetov, ki jih lahko izrisni (Draft) urejevalnik obdeluje istočasno - - - Only show the Draft snap toolbar during commands - Orodno vrstico pripenjanja prikaži le med ukazi - Grid @@ -2872,16 +2867,6 @@ občega koordinatnega sistema, obarvajo rdeče, zeleno ali modro Decrease radius Zmanjšaj domet - - - If checked, the Draft snap toolbar will only be visible during commands - Če je označeno, bo Risarjeva (draft) orodna vrstica pripenjanja vidna le med ukazi - - - - Show the Snap widget in the Draft Workbench - Prikaži Gradnik pripenjanja v delovnem okolju Risar (Draft) - E @@ -3012,20 +2997,35 @@ občega koordinatnega sistema, obarvajo rdeče, zeleno ali modro UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Če je označeno, se Gradnik pripenjanja prikaže v vrstici stanja Risarja (Draft) + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3632,44 +3632,44 @@ ali poskusite shraniti v starejšo različico DWGja. - + No active document. Aborting. Ni dejavnega dokumenta. Prekinjanje. - + Wrong input: object {} not in document. Napačen vnos: predmeta {} ni v dokumentu. - + Unable to insert new object into a scaled part Novega predmeta ni mogoče vstaviti v prevelikosten del - + Symbol not implemented. Using a default symbol. Znak ni uveden. Uporabljanje privzetega znaka. - + image is Null slika je ničelna - + filename does not exist on the system or in the resource file imena datoteke ni v sistemu ali v mapi z viri - + unable to load texture ustroja ni mogoče naložiti - + Does not have 'ViewObject.RootNode'. Nima 'ViewObject.RootNode' (KorenskoVozlišče.PogledaPredmeta). @@ -4043,12 +4043,12 @@ ali poskusite shraniti v starejšo različico DWGja. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4056,13 +4056,13 @@ ali poskusite shraniti v starejšo različico DWGja. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4572,8 +4572,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Kubična bezierova krivulja + Cubic Bézier Curve + Cubic Bézier Curve @@ -5189,38 +5189,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Točke: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Postavitev: - + Wrong input: incorrect type of placement. Nepravilen vnos: napačna vrsta postavitve. - + Wrong input: incorrect type of points. Nepravilen vnos: napačna vrsta točk. - + Cannot generate shape: Ni mogoče ustvariti oblike: @@ -8097,12 +8097,12 @@ preko kotnice Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8567,8 +8567,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm index df7b14304d..fdd4c2fb20 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm and b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts index 19225e3a15..b08d56991d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts @@ -1503,16 +1503,6 @@ Objekti se u tom slučaju mogu automatski dodavati i grupama. Include groups in layer list Uključite grupe u listu slojeva - - - If checked, instructions are displayed in the Report view when using Draft commands - Ako je potvrđeno, prilikom upotrebe komandi okruženja Crtanje u Pregledaču objava će se prikazivati instrukcije - - - - Show prompts in the Report view - Prikaži odzivnik u Pregledaču objava - If checked, base objects, instead of created copies, are selected after copying @@ -1615,6 +1605,16 @@ miš neće moći uticati na sadržaj polja tokom trajanja jedne sekunde. Ovime s Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1807,6 +1807,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Produžetak kotne linije + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1842,12 +1849,6 @@ pattern definitions to be added to the standard patterns Annotations Napomene - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Podrazumevani množilac razmere napomene. Inverzan je razmeri podešenoj u vidžetu za podešavanje razmere napomene. Ako je razmera 1:100, množilac je 100. - Font name @@ -2582,11 +2583,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2859,16 +2855,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Smanji poluprečnik - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -2999,20 +2985,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Ako je potvrđeno, grafički element hvatanja će se prikazivati u statusnoj traci okruženja Crtanje + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3616,44 +3617,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Nema aktivnog dokumenta. Obustavljanje. - + Wrong input: object {} not in document. Pogrešan unos: objekat {} nije u dokumentu. - + Unable to insert new object into a scaled part Nije moguće umetnuti novi objekat u skalirani deo - + Symbol not implemented. Using a default symbol. Simbol nije primenjen. Koristi se unapred zadati simbol. - + image is Null slika je prazna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sistemu ili u resursnoj datoteci - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4027,12 +4028,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4040,13 +4041,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4556,8 +4557,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Kubna Bezjeova kriva + Cubic Bézier Curve + Cubic Bézier Curve @@ -5173,38 +5174,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Tačke: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Položaj: - + Wrong input: incorrect type of placement. Pogrešan unos: pogrešna vrsta Položaja. - + Wrong input: incorrect type of points. Pogrešan unos: pogrešna vrsta Tačaka. - + Cannot generate shape: Nije moguće generisati oblik: @@ -8083,12 +8084,12 @@ iznad kotne linije Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8553,8 +8554,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index e22a5e1c5e..820d4b43ab 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 376a61f277..a4b5fb6789 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -1505,16 +1505,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Укључите групе у листу слојева - - - If checked, instructions are displayed in the Report view when using Draft commands - Ако је потврђено, приликом употребе команди Draft радног окружења у Прегледачу објава ће се приказивати инструкције - - - - Show prompts in the Report view - Прикажи одзивник у Прегледачу објава - If checked, base objects, instead of created copies, are selected after copying @@ -1617,6 +1607,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1809,6 +1809,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Продужетак котне линије + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1844,12 +1851,6 @@ pattern definitions to be added to the standard patterns Annotations Напомене - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Подразумевани множилац размере напомене. Инверзан је размери подешеној у прозору за подешавање размере напомене. Ако је размера 1:100, множилац је 100. - Font name @@ -2584,11 +2585,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time - - - Only show the Draft snap toolbar during commands - Only show the Draft snap toolbar during commands - Grid @@ -2861,16 +2857,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Смањи полупречник - - - If checked, the Draft snap toolbar will only be visible during commands - If checked, the Draft snap toolbar will only be visible during commands - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3001,20 +2987,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Ако је потврђено, графички елемент хватања ће се приказивати у статусној траци окружења Цртање + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3618,44 +3619,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Нема активног документа. Обустављање. - + Wrong input: object {} not in document. Погрешан унос: објекат {} није у документу. - + Unable to insert new object into a scaled part Није могуће уметнути нови објекат у скалирани део - + Symbol not implemented. Using a default symbol. Симбол није примењен. Користи се унапред задати симбол. - + image is Null слика је празна - + filename does not exist on the system or in the resource file назив датотеке не постоји на систему или у ресурсној датотеци - + unable to load texture није могуће учитати текстуру - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4029,12 +4030,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4042,13 +4043,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4558,8 +4559,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Кубна Безјеова крива + Cubic Bézier Curve + Cubic Bézier Curve @@ -5175,38 +5176,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Тачке: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Положај: - + Wrong input: incorrect type of placement. Погрешан унос: погрешна врста Положаја. - + Wrong input: incorrect type of points. Погрешан унос: погрешна врста Тачака. - + Cannot generate shape: Није могуће генерисати облик: @@ -8085,12 +8086,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8555,8 +8556,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index dc119b98fc..487aa515cd 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 1d44e5148a..3117dbebf6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -192,7 +192,7 @@ The type of the starting arrows or markers to use for dimensions and labels - The type of the starting arrows or markers to use for dimensions and labels + Typ av startpilar eller markörer att använda för mått och etiketter @@ -1504,16 +1504,6 @@ Föremål kan då även läggas till i grupper automatiskt. Include groups in layer list Inkludera grupper i lagerlista - - - If checked, instructions are displayed in the Report view when using Draft commands - Om markerad visas instruktioner i rapportvyn när du använder Draft-kommandon - - - - Show prompts in the Report view - Visa uppmaningar i rapportvyn - If checked, base objects, instead of created copies, are selected after copying @@ -1620,6 +1610,16 @@ musen av misstag och ändra det inmatade värdet. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1814,6 +1814,13 @@ mönsterdefinitioner som ska läggas till standardmönstren Dimension line overshoot Överskjut på måttsättningslinje + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1849,13 +1856,6 @@ mönsterdefinitioner som ska läggas till standardmönstren Annotations Annoteringar - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Standardmultiplikatorn för annoteringsskalan. Detta är inversen av den skala som ställts in -i widgeten Annoteringsskala. Om skalan är 1:100 är multiplikatorn 100. - Font name @@ -2593,11 +2593,6 @@ Använd Draft ToggleGrid för att ändra detta för den aktiva vyn.The maximum number of objects Draft Edit is allowed to process at the same time Det maximala antalet objekt som Draft Edit får bearbeta samtidigt - - - Only show the Draft snap toolbar during commands - Visa bara verktygsfältet Draft snap under kommandon - Grid @@ -2868,16 +2863,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Minska radie - - - If checked, the Draft snap toolbar will only be visible during commands - Om den är markerad är verktygsfältet Draft snap endast synligt under kommandon - - - - Show the Snap widget in the Draft Workbench - Visa widgeten Snap i arbetsbänken för utkast - E @@ -3008,20 +2993,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - Om den är markerad visas Snap-widgeten i statusfältet för utkast + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3628,44 +3628,44 @@ eller försök spara till en lägre DWG-version. - + No active document. Aborting. Inget aktivt dokument. Avbryter. - + Wrong input: object {} not in document. Fel inmatning: objekt {} finns inte i dokumentet. - + Unable to insert new object into a scaled part Det går inte att infoga ett nytt objekt i en skalad del - + Symbol not implemented. Using a default symbol. Symbolen är inte implementerad. Använd en standardsymbol. - + image is Null bilden är noll - + filename does not exist on the system or in the resource file filnamnet finns inte på systemet eller i resursfilen - + unable to load texture kan inte ladda textur - + Does not have 'ViewObject.RootNode'. Har inte 'ViewObject.RootNode'. @@ -4039,12 +4039,12 @@ eller försök spara till en lägre DWG-version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4052,13 +4052,13 @@ eller försök spara till en lägre DWG-version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4568,8 +4568,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Kubisk Bézier-kurva + Cubic Bézier Curve + Cubic Bézier Curve @@ -5185,38 +5185,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Punkter: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Placering: - + Wrong input: incorrect type of placement. Fel inmatning: felaktig typ av placering. - + Wrong input: incorrect type of points. Fel inmatning: felaktig typ av punkter. - + Cannot generate shape: Kan inte generera form: @@ -8098,12 +8098,12 @@ bortom dimensionslinjen Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8568,8 +8568,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 4f6ccd767f..910e752b3d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index d8927fbea0..e185b555e6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -220,7 +220,7 @@ The type of the ending arrows or markers to use for dimensions and labels - The type of the ending arrows or markers to use for dimensions and labels + Boyutlar ve etiketler için kullanılacak bitiş ​​oklarının veya işaretleyicilerin türü @@ -1507,16 +1507,6 @@ Daha sonra nesneler otomatik olarak gruplara da eklenebilir. Include groups in layer list Grupları katman listesine dahil et - - - If checked, instructions are displayed in the Report view when using Draft commands - İşaretlenirse, Taslak komutları kullanılırken Rapor görünümünde talimatlar görüntülenir - - - - Show prompts in the Report view - İstemleri Rapor görünümünde göster - If checked, base objects, instead of created copies, are selected after copying @@ -1620,6 +1610,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1813,6 +1813,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Ölçülendirme çizgisi aşımı + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1848,12 +1855,6 @@ pattern definitions to be added to the standard patterns Annotations Açıklamalar - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Varsayılan açıklama ölçek çarpanı. Bu, Açıklama ölçek widget'ında ayarlanan ölçeğin tersidir. Ölçek 1:100 ise çarpan 100'dür. - Font name @@ -2586,11 +2587,6 @@ Etkin görünüm için bunu değiştirmek üzere Taslak Izgarası Aç/Kapat öge The maximum number of objects Draft Edit is allowed to process at the same time Aynı anda Taslak Düzenle işlevinin işlemesi için izin verilen nesnelerin sayısı - - - Only show the Draft snap toolbar during commands - Taslak tuttarma araç çubuğunu yalnızca komutlar sırasında göster - Grid @@ -2861,16 +2857,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Yarıçapı azalt - - - If checked, the Draft snap toolbar will only be visible during commands - İşaretlenirse, Taslak yakalama araç çubuğu yalnızca komutlar sırasında görünür olacaktır - - - - Show the Snap widget in the Draft Workbench - Show the Snap widget in the Draft Workbench - E @@ -3001,20 +2987,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3621,44 +3622,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -4032,12 +4033,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4045,13 +4046,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4561,8 +4562,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Cubic Bézier curve + Cubic Bézier Curve + Cubic Bézier Curve @@ -5178,38 +5179,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Points: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Placement: - + Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Cannot generate shape: @@ -8091,12 +8092,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8561,8 +8562,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 61d7dd6e2c..79ff07df5d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index 71bf7ebb56..21adb3d228 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -1512,16 +1512,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list Включити групи до списку шарів - - - If checked, instructions are displayed in the Report view when using Draft commands - Якщо позначено, у поданні Звіт відображатимуться інструкції під час використання команд Чернетка - - - - Show prompts in the Report view - Показати підказки у поданні Звіт - If checked, base objects, instead of created copies, are selected after copying @@ -1628,6 +1618,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1822,6 +1822,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot Перевищення розмірної лінії + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1857,13 +1864,6 @@ pattern definitions to be added to the standard patterns Annotations Анотація - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - Множник масштабу анотацій за замовчуванням. Це величина, обернена до масштабу, встановленого -у віджеті Масштаб анотацій. Якщо масштаб 1:100, множник дорівнює 100. - Font name @@ -2603,11 +2603,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time Максимальна кількість об'єктів, яку Draft Edit може обробляти одночасно - - - Only show the Draft snap toolbar during commands - Показувати панель інструментів прив'язки чернетки лише під час виконання команд - Grid @@ -2880,16 +2875,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius Зменшити радіус - - - If checked, the Draft snap toolbar will only be visible during commands - Якщо позначено, панель інструментів прив'язки чернетки буде видимою лише під час виконання команд - - - - Show the Snap widget in the Draft Workbench - Показати віджет "Прив'язка" у Workbench чернетки - E @@ -3020,20 +3005,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - If checked, the Snap widget is displayed in the Draft status bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3640,44 +3640,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. Немає активного документа. Відмінити. - + Wrong input: object {} not in document. Неправильне введення: об'єкт {} не в документі. - + Unable to insert new object into a scaled part Неможливо вставити новий об'єкт у масштабовану деталь - + Symbol not implemented. Using a default symbol. Символ не реалізовано. Використовується символ за замовчуванням. - + image is Null зображення пусте - + filename does not exist on the system or in the resource file ім'я файлу не існує в системі або у файлі ресурсів - + unable to load texture неможливо завантажити текстуру - + Does not have 'ViewObject.RootNode'. Не має 'ViewObject.RootNode'. @@ -4051,12 +4051,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4064,13 +4064,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4580,8 +4580,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - Кубічна крива Безьє + Cubic Bézier Curve + Cubic Bézier Curve @@ -5197,38 +5197,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: Точки: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: Розміщення: - + Wrong input: incorrect type of placement. Неправильне введення: хибний тип розміщення. - + Wrong input: incorrect type of points. Wrong input: incorrect type of points. - + Cannot generate shape: Не можна створити форму: @@ -7280,32 +7280,32 @@ Otherwise the copies will have the same orientation as the original Base object. Number of copies in X-direction - Number of copies in X-direction + Кількість копій у напрямку осі X Number of copies in Y-direction - Number of copies in Y-direction + Кількість копій у напрямку осі Y Number of copies in Z-direction - Number of copies in Z-direction + Кількість копій у напрямку осі Z Distance and orientation of intervals in X-direction - Distance and orientation of intervals in X-direction + Відстань та орієнтація інтервалів у напрямку осі X Distance and orientation of intervals in Y-direction - Distance and orientation of intervals in Y-direction + Відстань та орієнтація інтервалів у напрямку осі Y Distance and orientation of intervals in Z-direction - Distance and orientation of intervals in Z-direction + Відстань та орієнтація інтервалів у напрямку осі Z @@ -8110,12 +8110,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8580,8 +8580,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index dc5095329e..455048ffed 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 18496eb4ff..451dd72ca1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -1498,16 +1498,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list 在图层列表中包含组 - - - If checked, instructions are displayed in the Report view when using Draft commands - 如果选中，则使用草稿命令时会在报告视图中显示说明 - - - - Show prompts in the Report view - 在报表视图中显示提示 - If checked, base objects, instead of created copies, are selected after copying @@ -1610,6 +1600,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1803,6 +1803,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot 尺寸线过度 + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1838,12 +1845,6 @@ pattern definitions to be added to the standard patterns Annotations 注释 - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - 默认的注释缩放倍数，是注释缩放部件中设置的缩放比例的倒数。 如果比例为1:100，则倍数为100。 - Font name @@ -2579,11 +2580,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time 允许同时处理的最大对象草稿编辑数量 - - - Only show the Draft snap toolbar during commands - 仅在命令执行期间显示草图吸附工具栏 - Grid @@ -2856,16 +2852,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius 减小半径 - - - If checked, the Draft snap toolbar will only be visible during commands - 如果选中，则草稿捕捉工具栏仅在命令期间可见 - - - - Show the Snap widget in the Draft Workbench - 在草稿工作台中显示捕捉小部件 - E @@ -2996,20 +2982,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - 如果选中，捕捉小组件将显示在草图状态栏中 + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3616,44 +3617,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. 没有活动文档。中止。 - + Wrong input: object {} not in document. 输入错误：对象 {} 不在文档中。 - + Unable to insert new object into a scaled part 无法将新对象插入缩放部分 - + Symbol not implemented. Using a default symbol. 符号未实现。使用默认符号。 - + image is Null 图像为空 - + filename does not exist on the system or in the resource file 文件名在系统或资源文件中不存在 - + unable to load texture 无法加载纹理 - + Does not have 'ViewObject.RootNode'. 没有'ViewObject.RootNode'。 @@ -4027,12 +4028,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4040,13 +4041,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4556,8 +4557,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - 三次贝塞尔曲线 + Cubic Bézier Curve + Cubic Bézier Curve @@ -5173,38 +5174,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: 点: - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: 位置： - + Wrong input: incorrect type of placement. 输入错误：位置类型不正确。 - + Wrong input: incorrect type of points. 输入错误：点类型不正确。 - + Cannot generate shape: 无法生成形状： @@ -8074,12 +8075,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8544,8 +8545,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index f2727a9a79..061a36bc39 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index b7a92e03c9..294699c959 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -1498,16 +1498,6 @@ Objects can then automatically be added to groups as well. Include groups in layer list 將群組加入圖層列表中 - - - If checked, instructions are displayed in the Report view when using Draft commands - 若被勾選，當使用草稿指令時，說明會顯示在報表檢視中。 - - - - Show prompts in the Report view - 在報告檢視中顯示提示符號 - If checked, base objects, instead of created copies, are selected after copying @@ -1608,6 +1598,16 @@ accidentally and modifying the entered value. Command Options Command Options + + + If checked, instructions are displayed in the Report View when using Draft commands + If checked, instructions are displayed in the Report View when using Draft commands + + + + Show prompts in the Report View + Show prompts in the Report View + If checked, Length input, instead of the X coordinate, will have the initial focus. @@ -1801,6 +1801,13 @@ pattern definitions to be added to the standard patterns Dimension line overshoot 標註線超越量 + + + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + The default annotation scale multiplier. This is the inverse of the scale set +in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. + Texts @@ -1836,13 +1843,6 @@ pattern definitions to be added to the standard patterns Annotations 註解 - - - The default annotation scale multiplier. This is the inverse of the scale set -in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - 預設註解比例乘數。這是比例尺集的倒數 -在註解比例小工具中。如果比例為 1:100，則乘數為 100。 - Font name @@ -2579,11 +2579,6 @@ Use Draft ToggleGrid to change this for the active view. The maximum number of objects Draft Edit is allowed to process at the same time 草稿編輯允許同時處理的最大物件數 - - - Only show the Draft snap toolbar during commands - 僅在指令期間顯示草稿鎖點工具列 - Grid @@ -2856,16 +2851,6 @@ if they match the X, Y or Z axis of the global coordinate system Decrease radius 減少半徑 - - - If checked, the Draft snap toolbar will only be visible during commands - 若被勾選，草稿鎖點工具列將僅在命令期間可見 - - - - Show the Snap widget in the Draft Workbench - 在草稿工作台顯示鎖點小工具 - E @@ -2996,20 +2981,35 @@ if they match the X, Y or Z axis of the global coordinate system UI Options UI Options + + + If checked, the Draft Snap toolbar will only be visible during commands + If checked, the Draft Snap toolbar will only be visible during commands + + + + Only show the Draft Snap toolbar during commands + Only show the Draft Snap toolbar during commands + - If checked, the Snap widget is displayed in the Draft status bar - 若被勾選，鎖點小工具將顯示在草稿狀態列中 + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + If checked, the Draft Snap Widget is displayed in the Draft Status Bar + + + + Show the Draft Snap Widget in the Draft Workbench + Show the Draft Snap Widget in the Draft Workbench - If checked, the annotation scale widget is displayed in the Draft status bar - If checked, the annotation scale widget is displayed in the Draft status bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar + If checked, the Draft Scale Widget is displayed in the Draft Status Bar - Show the Annotation Scale Widget in the Draft Workbench - Show the Annotation Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench + Show the Draft Scale Widget in the Draft Workbench @@ -3614,44 +3614,44 @@ or try saving to a lower DWG version. - + No active document. Aborting. 無活動中文件。中止。 - + Wrong input: object {} not in document. 錯誤輸入：物件 {} 不在文件中。 - + Unable to insert new object into a scaled part 無法將新物件插入到已縮放的零件中 - + Symbol not implemented. Using a default symbol. 符號尚未被實作出來。使用一預設符號。 - + image is Null 影像為空 - + filename does not exist on the system or in the resource file 檔名在系統中或資源檔案中不存在 - + unable to load texture 無法載入紋理 - + Does not have 'ViewObject.RootNode'. 沒有 'ViewObject.RootNode' 屬性。 @@ -4025,12 +4025,12 @@ or try saving to a lower DWG version. Arc From 3 Points - + Create Arc From 3 Points Create Arc From 3 Points - + @@ -4038,13 +4038,13 @@ or try saving to a lower DWG version. %1 pick first point - + %1 pick second point %1 pick second point - + %1 pick third point %1 pick third point @@ -4554,8 +4554,8 @@ The final angle will be the base angle plus this amount. - Cubic Bézier curve - 三次方貝茲曲線 + Cubic Bézier Curve + Cubic Bézier Curve @@ -5171,38 +5171,38 @@ The final angle will be the base angle plus this amount. All shapes must be planar - - + + Points: 點： - + Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. - + Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. - + Placement: 放置： - + Wrong input: incorrect type of placement. 錯誤輸入：放置類型不正確。 - + Wrong input: incorrect type of points. 錯誤輸入：點的類型不正確。 - + Cannot generate shape: 無法產生形狀： @@ -8058,12 +8058,12 @@ beyond the dimension line Draft_ArcTools - + Arc Tools Arc Tools - + Tools to create various types of circular arcs Tools to create various types of circular arcs @@ -8528,8 +8528,8 @@ The initial projection direction is the opposite of the current active view dire - Snaps to the intersection of 2 edges - Snaps to the intersection of 2 edges + Snaps to the intersection of 2 edges, and the intersection of a face and an edge + Snaps to the intersection of 2 edges, and the intersection of a face and an edge diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 0418d54ec0..e08b89299c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -1675,9 +1675,9 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1768,7 +1768,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error @@ -1808,7 +1808,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error @@ -1824,7 +1824,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error @@ -1966,17 +1966,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error @@ -1987,15 +1987,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! @@ -2007,25 +2007,25 @@ Specify another file. - - - + + + Selected object is not a part! - - - Only faces can be picked + + + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! - + Only one master face for a contact constraint! @@ -2287,29 +2287,29 @@ Specify another file. - - - - + + + + Selection error - + Nothing selected! - + Selected object is not a part! - - - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) @@ -2361,27 +2361,27 @@ Specify another file. - - - + + + Selection error - + Nothing selected! - + Selected object is not a part! - - Only faces can be picked + + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts index d6837f92f0..d38f4b6c0a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts @@ -931,32 +931,32 @@ External editor - External editor + Вонкавы сродак праўкі Analysis Defaults - Analysis Defaults + Першапачатковае даследаванне Solver Defaults - Solver Defaults + Першапачатковы сродак рашэння Initial time step - Initial time step + Пачатковы часовы крок End time - End time + Час заканчэння Number of CPUs to use - Number of CPUs to use + Колькасць ужытых ядраў цэнтральнага працэсара @@ -986,7 +986,7 @@ Minimum time step - Minimum time step + Найменшы час кроку @@ -1011,7 +1011,7 @@ Maximum time step - Maximum time step + Найбольшы час кроку @@ -1098,10 +1098,8 @@ Only takes effect if 'Pipeline only' is enabled '%1' does not exist! Specify another file. - The specified executable -'%1' - does not exist! -Specify another file. + Двайковы файл '%1' не існуе! +Пакажыце іншы файл. @@ -1125,17 +1123,17 @@ Specify another file. Multithreading - Multithreading + Шматпаточнасць CPU cores to be used - CPU cores to be used + Будуць ужытыя ядра цэнтральнага працэсару Multi-core CPU support - Multi-core CPU support + Падтрымка шмат'ядравага цэнтральнага працэсару @@ -1191,7 +1189,7 @@ will be merged to make the volume boundaries invisible. Elmer Binaries - Elmer Binaries + Двайковы файл Elmer @@ -1224,10 +1222,8 @@ will be merged to make the volume boundaries invisible. '%1' does not exist! Specify another file. - The specified executable -'%1' - does not exist! -Specify another file. + Двайковы файл '%1' не існуе! +Пакажыце іншы файл. @@ -1275,12 +1271,13 @@ Highest: Only the highest elements will be exported. This means volumes for a vo FEM: Only FEM elements will be exported. This means only edges not belonging to faces and faces not belonging to volumes. - All: All elements will be exported. + Усе: усе элементы будуць экспартаваныя. -Highest: Only the highest elements will be exported. This means volumes for a volume mesh and faces for a shell mesh. +Самыя высокія: будуць экспартаваныя толькі самыя высокія элементы. +Для аб'ёмаў ужываецца аб'ёмная сетка, для граняў - паліганальная сетка абалонкі. -FEM: Only FEM elements will be exported. This means only edges -not belonging to faces and faces not belonging to volumes. +МКЭ: будуць экспартаваныя толькі элементы МКЭ. +Экспартуюцца толькі рэбры, якія не належаць да граняў, і грані, якія не належаць да аб'ёмаў. @@ -1372,7 +1369,7 @@ the constraint or material is applied. Working Directory for Solving Analysis and Gmsh Meshing - Working Directory for Solving Analysis and Gmsh Meshing + Працоўны каталог для даследавання рашэнняў і пабудовы сеткі Gmsh @@ -1382,7 +1379,7 @@ the constraint or material is applied. Create mesh groups for analysis reference shapes (experimental) - Create mesh groups for analysis reference shapes (experimental) + Стварыць суполку паліганальнай сеткі для даследавання апорных фігур (эксперыментальна) @@ -1454,7 +1451,7 @@ adding an analysis container Gmsh Binary - Gmsh Binary + Двайковы файл Gmsh @@ -1507,10 +1504,8 @@ adding an analysis container '%1' does not exist! Specify another file. - The specified executable -'%1' - does not exist! -Specify another file. + Двайковы файл '%1' не існуе! +Пакажыце іншы файл. @@ -1596,7 +1591,7 @@ exported from FreeCAD. Mystran Binary - Mystran Binary + Двайковы файл Mystran @@ -1634,10 +1629,8 @@ exported from FreeCAD. '%1' does not exist! Specify another file. - The specified executable -'%1' - does not exist! -Specify another file. + Двайковы файл '%1' не існуе! +Пакажыце іншы файл. @@ -1665,12 +1658,12 @@ Specify another file. Z88 Binary - Z88 Binary + Двайковы файл Z88 Solver Settings - Solver Settings + Налады сродку рашэння @@ -1704,17 +1697,19 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Найбольшая колькасць кропак у матрыцы калянасці. -Магчыма, вам спатрэбіцца павялічыць гэтае значэнне пры ўжыванні сродку рашэння Халецкага, інакш вы атрымаеце паведамленне пра памылку, што "MAXGS" неабходна павялічыць. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. Maximum places in coincidence vector - Maximum places in coincidence vector + Найбольшая колькасць кропак у вектары супадзення @@ -1741,10 +1736,8 @@ that "MAXKOI" needs to be increased. '%1' does not exist! Specify another file. - The specified z88r executable -'%1' - does not exist! -Specify another file. + Двайковы файл z88r '%1' не існуе! +Пакажыце іншы файл. @@ -1804,7 +1797,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Памылка ўводу @@ -1844,7 +1837,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Памылка ўводу @@ -1860,7 +1853,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Памылка ўводу @@ -1931,7 +1924,7 @@ Specify another file. Analysis Feature Properties - Analysis Feature Properties + Уласцівасці элементаў аналізу @@ -1959,7 +1952,7 @@ Specify another file. Use only a single reference for bearing constraint - Use only a single reference for bearing constraint + Ужыць толькі адзін спасылак для абмежавання падшыпніка @@ -2002,17 +1995,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Памылка выбару @@ -2023,15 +2016,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Толькі адна галоўная грань і адна залежная грань для абмежавання кантакту! - - - + + + Nothing selected! Нічога не абрана! @@ -2043,25 +2036,25 @@ Specify another file. - - - + + + Selected object is not a part! Абраны аб'ект не з'яўляецца дэталлю! - - - Only faces can be picked - Можна абраць толькі грані + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Толькі адна асноўная грань для абмежавання кантакту! - + Only one master face for a contact constraint! Толькі адна асноўная грань для абмежавання кантакту! @@ -2190,7 +2183,7 @@ Specify another file. Select an edge or a face. - Select an edge or a face. + Абраць рабро ці грань. @@ -2290,7 +2283,7 @@ Specify another file. Select an edge or a face. - Select an edge or a face. + Абраць рабро ці грань. @@ -2323,30 +2316,30 @@ Specify another file. - - - - + + + + Selection error Памылка выбару - + Nothing selected! Нічога не абрана! - + Selected object is not a part! Абраны аб'ект не з'яўляецца дэталлю! - - - Selection must only consist of faces! - Выбар павінен складацца толькі з граняў! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2397,28 +2390,28 @@ Specify another file. - - - + + + Selection error Памылка выбару - + Nothing selected! Нічога не абрана! - + Selected object is not a part! Абраны аб'ект не з'яўляецца дэталлю! - - Only faces can be picked - Можна абраць толькі грані + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked @@ -2539,7 +2532,8 @@ Specify another file. The transformable faces have changed. Add only the transformable faces and remove non-transformable faces! - The transformable faces have changed. Add only the transformable faces and remove non-transformable faces! + Пераўтваральныя грані змяніліся. +Дадаць толькі пераўтваральныя грані і выдаляць непераўтваральныя! @@ -2557,7 +2551,7 @@ Specify another file. Data Along a Line Options - Data Along a Line Options + Налады дадзеных наўздоўж лініі @@ -2571,7 +2565,7 @@ Specify another file. Data at Point Options - Data at Point Options + Налады дадзеных у кропцы @@ -2623,12 +2617,12 @@ Specify another file. FEM Material - FEM Material + Матэрыял МКЭ Density - Density + Шчыльнасць @@ -2638,32 +2632,32 @@ Specify another file. Young's modulus - Young's modulus + Модуль Юнга Poisson ratio - Poisson ratio + Каэфіцыент Пуасона Thermal conductivity - Thermal conductivity + Цеплаправоднасць Expansion coefficient - Expansion coefficient + Каэфіцыент пашырэння Reference temperature - Reference temperature + Кантрольная тэмпература Specific heat capacity - Specific heat capacity + Удзельная цеплаёмістасць @@ -2673,7 +2667,7 @@ Specify another file. Kinematic viscosity - Kinematic viscosity + Кінематычная глейкасць @@ -2712,7 +2706,7 @@ Specify another file. Liquid section parameter - Liquid section parameter + Налады падзелу асяроддзя @@ -2722,34 +2716,34 @@ Specify another file. Pipe area - Pipe area + Паверхня трубы Hydraulic radius - Hydraulic radius + Гідраўлічны радыус Manning coefficient - Manning coefficient + Каэфіцыент Манінга Initial area - Initial area + Пачатковая вобласць Enlarged area - Enlarged area + Павялічаная вобласць Contracted area - Contracted area + Паменшаная вобласць @@ -2799,12 +2793,12 @@ Specify another file. Entrance area - Entrance area + Уваходная вобласць Diaphragm area - Diaphragm area + Вобласць дыяфрагмы @@ -3276,7 +3270,7 @@ Note: has no effect if a solid was selected Analysis Feature Properties - Analysis Feature Properties + Уласцівасці элементаў аналізу @@ -3346,7 +3340,7 @@ with harmonic/oscillating driving current Density - Density + Шчыльнасць @@ -3894,27 +3888,27 @@ For possible variables, see the description box below. medium princ. stress vector: s2x, s2y, s2z - medium princ. stress vector: s2x, s2y, s2z + сярэдні вектар механічнага напружання: s2x, s2y, s2z medium principal stress: P2 - medium principal stress: P2 + сярэдняе механічнае напружанне: P2 minimum princ. stress vector: s1x, s1y, s1z - minimum princ. stress vector: s1x, s1y, s1z + найменшы вектар механічнага напружання: s1x, s1y, s1z minimum principal stress: P3 - minimum principal stress: P3 + сярэдняе механічнае напружанне: P2 Mohr-Coulomb: mc - Mohr-Coulomb: mc + Мор-Кулон: mc @@ -3924,12 +3918,12 @@ For possible variables, see the description box below. Hints User-Defined Equations - Hints User-Defined Equations + Падказкі для вызначаных карыстальнікам ураўненняў Available Result Types - Available Result Types + Даступныя тыпы выніку @@ -3942,7 +3936,7 @@ For possible variables, see the description box below. Mechanical Analysis - Mechanical Analysis + Механічнае даследаванне @@ -3952,7 +3946,7 @@ For possible variables, see the description box below. Analysis Type - Analysis Type + Тып даследавання @@ -3982,12 +3976,12 @@ For possible variables, see the description box below. Write .inp File - Write .inp File + Запісаць файл .inp Edit .inp File - Edit .inp File + Змяніць файл .inp @@ -4041,7 +4035,7 @@ For possible variables, see the description box below. Meshes - Meshes + Паліганальных сетак @@ -4089,12 +4083,12 @@ For possible variables, see the description box below. Angle-Search - Angle-Search + Пошук вугла Stop angle - Stop angle + Вугал прыпынку @@ -4107,7 +4101,7 @@ For possible variables, see the description box below. Add Reference - Add Reference + Дадаць спасылак @@ -4155,7 +4149,7 @@ For possible variables, see the description box below. Add Reference - Add Reference + Дадаць спасылак @@ -4250,27 +4244,27 @@ For possible variables, see the description box below. Contact stiffness - Contact stiffness + Калянасць кантакту Clearance adjustment - Clearance adjustment + Рэгуляванне зазору Enable friction - Enable friction + Уключыць трэнне Friction coefficient - Friction coefficient + Каэфіцыент трэння Stick slope - Stick slope + Ухіл крывой адгезіі @@ -4308,7 +4302,7 @@ for the Elmer solver Click Add or Remove and select geometric elements - Click Add or Remove and select geometric elements + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце геаметрычныя элементы @@ -4346,22 +4340,22 @@ generated by the flow Rotations are only valid for beam and shell elements - Rotations are only valid for beam and shell elements + Вярчэнне дапушчальна толькі для элементаў бэлькі і абалонкі Rotation X - Rotation X + Вярчэнне па восі X Rotation Y - Rotation Y + Вярчэнне па восі Y Rotation Z - Rotation Z + Вярчэнне па восі Z @@ -4369,7 +4363,7 @@ generated by the flow Click Add or Remove and select geometric elements - Click Add or Remove and select geometric elements + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце геаметрычныя элементы @@ -4453,7 +4447,7 @@ normal vector of the face is used as direction Select multiple faces, click Add or Remove - Select multiple faces, click Add or Remove + Абярыце некалькі граняў, націсніце 'Дадаць' ці 'Выдаліць' @@ -4501,7 +4495,7 @@ normal vector of the face is used as direction Click Add or Remove and select geometric elements - Click Add or Remove and select geometric elements + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце геаметрычныя элементы @@ -4550,12 +4544,12 @@ normal vector of the face is used as direction Task Heat Flux Load - Task Heat Flux Load + Задача нагрузкі цеплавым патокам Click Add or Remove and select faces - Click Add or Remove and select faces + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце грані @@ -4575,18 +4569,18 @@ normal vector of the face is used as direction Surface heat flux - Surface heat flux + Канвекцыя цеплавога патоку Film coefficient - Film coefficient + Каэфіцыент канвекцыйнага цеплаабмену Ambient temperature - Ambient temperature + Тэмпература навакольнага асяроддзя @@ -4630,7 +4624,7 @@ normal vector of the face is used as direction Click Add or Remove and select faces - Click Add or Remove and select faces + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце грані @@ -4658,7 +4652,7 @@ normal vector of the face is used as direction Click Add or Remove and select faces - Click Add or Remove and select faces + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце грані @@ -4673,12 +4667,12 @@ normal vector of the face is used as direction Normal stiffness - Normal stiffness + Калянасць у напрамку нармалі Stiffness used for the Elmer solver - Stiffness used for the Elmer solver + Калянасць, якая ўжываецца для сродку рашэння Elmer @@ -4689,7 +4683,7 @@ normal vector of the face is used as direction Tangential stiffness - Tangential stiffness + Калянасць у напрамку датычнай @@ -4702,7 +4696,7 @@ normal vector of the face is used as direction Click Add or Remove and select geometric elements - Click Add or Remove and select geometric elements + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце геаметрычныя элементы @@ -4786,7 +4780,7 @@ normal vector of the face is used as direction Transformable Surfaces - Transformable Surfaces + Пераўтваральныя паверхні @@ -4799,12 +4793,12 @@ normal vector of the face is used as direction Inside out - Inside out + Унутры Cut cells - Cut cells + Выразаць клеткі @@ -5003,12 +4997,12 @@ normal vector of the face is used as direction Minimum scalar - Minimum scalar + Найменшы скалярны Maximum scalar - Maximum scalar + Найбольшы скалярны @@ -5036,12 +5030,12 @@ normal vector of the face is used as direction Minimum warp - Minimum warp + Найменшая дэфармаванасць Maximum warp - Maximum warp + Найбольшая дэфармаванасць @@ -5059,12 +5053,12 @@ normal vector of the face is used as direction Maximum size - Maximum size + Найбольшы памер Minimum size - Minimum size + Найменшы памер @@ -5104,12 +5098,12 @@ normal vector of the face is used as direction Growth rate - Growth rate + Тэмп росту Number of segments per edge - Number of segments per edge + Колькасць адрэзкаў на рабро @@ -5119,17 +5113,17 @@ normal vector of the face is used as direction Node count - Node count + Колькасць вузлоў Triangle count - Triangle count + Колькасць трыкутнікаў Tetrahedron count - Tetrahedron count + Колькасць тэтраэдраў @@ -5182,72 +5176,72 @@ normal vector of the face is used as direction Electrostatic Boundary Conditions - Electrostatic Boundary Conditions + Межавыя ўмовы электрастатычнасці &Electrostatic Boundary Conditions - &Electrostatic Boundary Conditions + Межавыя ўмовы &электрастатычнасці Fluid Boundary Conditions - Fluid Boundary Conditions + Межавая ўмова вадкасці &Fluid Boundary Conditions - &Fluid Boundary Conditions + &Межавая ўмова вадкасці Electromagnetic Boundary Conditions - Electromagnetic Boundary Conditions + Межавыя ўмовы электрамагнетычнасці &Electromagnetic Boundary Conditions - &Electromagnetic Boundary Conditions + Межавыя ўмовы электра&магнетычнасці Geometrical Analysis Features - Geometrical Analysis Features + Геаметрычныя элементы аналізу &Geometrical Analysis Features - &Geometrical Analysis Features + &Геаметрычныя элементы аналізу Mechanical Boundary Conditions and Loads - Mechanical Boundary Conditions and Loads + Механічныя межавыя ўмовы і нагрузкі &Mechanical Boundary Conditions and Loads - &Mechanical Boundary Conditions and Loads + &Механічныя межавыя ўмовы і нагрузкі Thermal Boundary Conditions and Loads - Thermal Boundary Conditions and Loads + Цеплавыя межавыя ўмовы і нагрузкі &Thermal Boundary Conditions and Loads - &Thermal Boundary Conditions and Loads + &Цеплавыя межавыя ўмовы і нагрузкі Analysis Features Without Solver - Analysis Features Without Solver + Элементы аналізу без сродку рашэння &Analysis Features Without Solver - &Analysis Features Without Solver + &Элементы аналізу без сродку рашэння @@ -5257,7 +5251,7 @@ normal vector of the face is used as direction &Filter Functions - &Filter Functions + &Функцыі фільтру @@ -5339,7 +5333,7 @@ normal vector of the face is used as direction New Analysis - New Analysis + Новы аналіз @@ -5352,7 +5346,7 @@ normal vector of the face is used as direction Remove all Clipping Planes - Remove all Clipping Planes + Выдаліць усе плоскасці перасеку @@ -5365,7 +5359,7 @@ normal vector of the face is used as direction FEM Examples - FEM Examples + Прыклады МКЭ @@ -5391,7 +5385,7 @@ normal vector of the face is used as direction Reinforced Material (Concrete) - Reinforced Material (Concrete) + Арміраваны матэрыял (бетон) @@ -5404,7 +5398,7 @@ normal vector of the face is used as direction FEM Mesh to Mesh - FEM Mesh to Mesh + Паліганальная сетка МКЭ у паліганальную сетку @@ -5417,7 +5411,7 @@ normal vector of the face is used as direction Display Mesh Info - Display Mesh Info + Адлюстраваць інфармацыю пра паліганальную сетку @@ -5430,7 +5424,7 @@ normal vector of the face is used as direction Mesh From Shape by Gmsh - Mesh From Shape by Gmsh + Паліганальная сетка ад фігуры Gmsh @@ -5443,7 +5437,7 @@ normal vector of the face is used as direction Mesh From Shape by Netgen - Mesh From Shape by Netgen + Паліганальная сетка ад фігуры Netgen @@ -5469,7 +5463,7 @@ normal vector of the face is used as direction Solver Job Control - Solver Job Control + Кіраваць заданнямі сродку рашэння @@ -5508,7 +5502,7 @@ normal vector of the face is used as direction Run Solver - Run Solver + Запусціць сродак рашэння @@ -5883,167 +5877,167 @@ No matching module was found in the current Python path. The data table that stores the extracted data - The data table that stores the extracted data + Табліца дадзеных, у якой захоўваюцца вынятыя дадзеныя The data source from which the data is extracted - The data source from which the data is extracted + Крыніца дадзеных, з якога здабываюцца дадзеныя The field to use as X data - The field to use as X data + Поле, якое будзе ўжывацца ў якасці дадзеных X Which part of the X field vector to use for the X axis - Which part of the X field vector to use for the X axis + Якую частку вектара поля X ужываць для восі X The field to use as Y data - The field to use as Y data + Поле, якое будзе ўжывацца ў якасці дадзеных Y Which part of the Y field vector to use for the Y axis - Which part of the Y field vector to use for the Y axis + Якую частку вектара поля Y ужываць для восі Y Specify if the field shall be extracted for every available frame - Specify if the field shall be extracted for every available frame + Вызначыць, ці павінна поле здабывацца для кожнага даступнага кадра Specify for which index the data should be extracted - Specify for which index the data should be extracted + Вызначыць, для якога індэкса павінны быць вынятыя дадзеныя Specify for which point index the data should be extracted - Specify for which point index the data should be extracted + Вызначыць, для якога індэкса кропкі павінны быць вынятыя дадзеныя Edit {} - Edit {} + Змяніць {} Show Plot - Show Plot + Паказаць графік Show Data - Show Data + Паказаць дадзеныя Histogram Data - Histogram Data + Дадзеныя гістаграмы Histogram View Settings - Histogram View Settings + Налады выгляду гістаграмы Lineplot Data - Lineplot Data + Дадзеныя лінейнай дыяграмы Lineplot View Settings - Lineplot View Settings + Налады выгляду лінейнай дыяграмы Show Table - Show Table + Паказаць табліцу Table Data - Table Data + Дадзеныя табліцы The name used in the plots legend - The name used in the plots legend + Назва, якая ўжываецца ў легендзе графіка The color the data bin area is drawn with - The color the data bin area is drawn with + Колер, якім чэрцяць вобласць слупкоў дадзеных The hatch pattern drawn in the bar - The hatch pattern drawn in the bar + Шаблон штрыхоўкі, які намаляваны на панэлі The line width of the hatch) - The line width of the hatch) + Шырыня лініі штрыхоўкі The width of the bar, between 0 and 1 (1 being without gaps) - The width of the bar, between 0 and 1 (1 being without gaps) + Шырыня панэлі ад 0 да 1 (калі 1 - без прабелаў) The style the line is drawn in - The style the line is drawn in + Стыль, у якім намаляваная лінія If the bars should show the cumulative sum left to right - If the bars should show the cumulative sum left to right + Калі панэлі павінны паказваць сумарную суму злева направа The type of histogram plotted - The type of histogram plotted + Тып пабудаванай гістаграмы The line width of all drawn hatch patterns - The line width of all drawn hatch patterns + Шырыня лініі ўсіх начэрчаных шаблонаў штрыхоўкі The number of bins the data is split into - The number of bins the data is split into + Колькасць слупкоў, на якія падзяляюцца дадзеныя The histogram plot title - The histogram plot title + Загаловак графіка гістаграмы The label shown for the histogram X axis - The label shown for the histogram X axis + Метка, якая паказаная на восі X гістаграмы The label shown for the histogram Y axis - The label shown for the histogram Y axis + Метка, якая паказаная на восі Y гістаграмы @@ -6051,42 +6045,43 @@ No matching module was found in the current Python path. Determines if the legend is plotted - Determines if the legend is plotted + Вызначае, ці нанесена легенда на графік The color the line and the markers are drawn with - The color the line and the markers are drawn with + Колер, якім начэрчаныя лінія і маркеры The width the line is drawn with - The width the line is drawn with + Шырыня, якой начэрчаная лінія The style the data markers are drawn with - The style the data markers are drawn with + Стыль, у якім начэрчаныя маркеры дадзеных The size the data markers are drawn in - The size the data markers are drawn in + Памер, якім начэрчаныя маркеры дадзеных If be the bars should show the cumulative sum left to right - If be the bars should show the cumulative sum left to right + Калі так, панэлі павінны паказваць сумарную суму злева направа The scale the axis are drawn in - The scale the axis are drawn in + Маштаб, у якім намаляваныя восі The name used in the table header. Default name is used if empty - The name used in the table header. Default name is used if empty + Назва, якая ўжываецца ў загалоўку табліцы. +Першапачатковая назва ўжываецца, калі яна пустая @@ -6104,7 +6099,7 @@ No matching module was found in the current Python path. Electromagnetic Boundary Conditions - Electromagnetic Boundary Conditions + Электрамагнетычныя межавыя ўмовы @@ -6160,7 +6155,7 @@ No matching module was found in the current Python path. Electromagnetic Equations - Electromagnetic Equations + Ураўненні электрамагнітнага полю @@ -6178,7 +6173,7 @@ No matching module was found in the current Python path. Contours Filter - Contours Filter + Фільтр контураў @@ -6270,7 +6265,7 @@ No matching module was found in the current Python path. Mechanical Equations - Mechanical Equations + Ураўненні механікі @@ -6283,7 +6278,7 @@ No matching module was found in the current Python path. Body Heat Source - Body Heat Source + Крыніца цяпла цела @@ -6296,7 +6291,7 @@ No matching module was found in the current Python path. Centrifugal Load - Centrifugal Load + Цэнтрабежная нагрузка @@ -6309,7 +6304,7 @@ No matching module was found in the current Python path. Current Density Boundary Condition - Current Density Boundary Condition + Межавая ўмова шчыльнасці току @@ -6322,7 +6317,7 @@ No matching module was found in the current Python path. Electrostatic Potential Boundary Condition - Electrostatic Potential Boundary Condition + Межавая ўмова электрастатычнага патэнцыялу @@ -6335,7 +6330,7 @@ No matching module was found in the current Python path. Flow Velocity Boundary Condition - Flow Velocity Boundary Condition + Межавая ўмова хуткасці патоку @@ -6348,7 +6343,7 @@ No matching module was found in the current Python path. Initial Pressure Condition - Initial Pressure Condition + Пачатковая ўмова ціску @@ -6361,7 +6356,7 @@ No matching module was found in the current Python path. Magnetization Boundary Condition - Magnetization Boundary Condition + Межавая ўмова намагнічанасці @@ -6446,7 +6441,7 @@ No matching module was found in the current Python path. Click Add or Remove and select geometric elements - Click Add or Remove and select geometric elements + Націсніце 'Дадаць' ці 'Выдаліць', і абярыце геаметрычныя элементы @@ -6725,7 +6720,7 @@ No matching module was found in the current Python path. Growth rate - Growth rate + Тэмп росту @@ -7379,12 +7374,12 @@ No matching module was found in the current Python path. Fluid Section for 1D Flow - Fluid Section for 1D Flow + Секцыя вадкасці для аднамернага патоку Creates a fluid section for 1D flow - Creates a fluid section for 1D flow + Стварае секцыю вадкасці для аднамернага патоку @@ -7418,12 +7413,12 @@ No matching module was found in the current Python path. Beam Rotation - Beam Rotation + Вярчэнне бэлькі Creates a beam rotation - Creates a beam rotation + Стварае вярчэнне бэлькі @@ -7431,12 +7426,12 @@ No matching module was found in the current Python path. Deformation Equation - Deformation Equation + Ураўненне дэфармацыі Creates an equation for deformation (nonlinear elasticity) - Creates an equation for deformation (nonlinear elasticity) + Стварае ўраўненне для дэфармацыі (нелінейная эластычнасць) @@ -7444,12 +7439,12 @@ No matching module was found in the current Python path. Elasticity Equation - Elasticity Equation + Ураўненне эластычнасці Creates an equation for elasticity (stress) - Creates an equation for elasticity (stress) + Стварае ўраўненне для эластычнасці (напружання) @@ -7457,12 +7452,12 @@ No matching module was found in the current Python path. Electricforce Equation - Electricforce Equation + Ураўненне электрычнай сілы Creates an equation for electric forces - Creates an equation for electric forces + Стварае ўраўненне для электрычных сіл @@ -7470,12 +7465,12 @@ No matching module was found in the current Python path. Electrostatic Equation - Electrostatic Equation + Ураўненне электрастатычнасці Creates an equation for electrostatic - Creates an equation for electrostatic + Стварае ўраўненне для электрастатычнасці @@ -7483,12 +7478,12 @@ No matching module was found in the current Python path. Flow Equation - Flow Equation + Ураўненне расходу Creates an equation for flow - Creates an equation for flow + Стварае ўраўненне для расходу @@ -7496,12 +7491,12 @@ No matching module was found in the current Python path. Flux Equation - Flux Equation + Ураўненне патоку Creates an equation for flux - Creates an equation for flux + Стварае ўраўненне для патоку @@ -7509,12 +7504,12 @@ No matching module was found in the current Python path. Heat Equation - Heat Equation + Ураўненне цеплаправоднасці Creates an equation for heat - Creates an equation for heat + Стварае ўраўненне для цеплаправоднасці @@ -7522,12 +7517,12 @@ No matching module was found in the current Python path. Magnetodynamic Equation - Magnetodynamic Equation + Ураўненне магнітадынамікі Creates an equation for magnetodynamic forces - Creates an equation for magnetodynamic forces + Стварае ўраўненне для магнітадынамічных сіл @@ -7535,12 +7530,12 @@ No matching module was found in the current Python path. Magnetodynamic 2D Equation - Magnetodynamic 2D Equation + Двухмернае ўраўненне магнітадынамікі Creates an equation for 2D magnetodynamic forces - Creates an equation for 2D magnetodynamic forces + Стварае ўраўненне для двухмерных магнітадынамічных сіл @@ -7548,12 +7543,12 @@ No matching module was found in the current Python path. Static Current Equation - Static Current Equation + Ураўненне статычнага току Creates an equation for static current - Creates an equation for static current + Стварае ўраўненне для статычнага току @@ -7561,12 +7556,12 @@ No matching module was found in the current Python path. Fluid Material - Fluid Material + Матэрыял вадкасці Creates a fluid material - Creates a fluid material + Стварае матэрыял вадкасці @@ -7574,12 +7569,12 @@ No matching module was found in the current Python path. Non-Linear Mechanical Material - Non-Linear Mechanical Material + Нелінейны механічны матэрыял Creates a non-linear mechanical material - Creates a non-linear mechanical material + Стварае нелінейны механічны матэрыял @@ -7587,12 +7582,12 @@ No matching module was found in the current Python path. Solid Material - Solid Material + Суцэльны матэрыял Creates a solid material - Creates a solid material + Стварае суцэльны матэрыял @@ -7600,12 +7595,12 @@ No matching module was found in the current Python path. Mesh Boundary Layer - Mesh Boundary Layer + Мяжа пласту паліганальнай сеткі Creates a mesh boundary layer - Creates a mesh boundary layer + Стварае мяжу пласту паліганальнай сеткі @@ -7613,12 +7608,12 @@ No matching module was found in the current Python path. Clear FEM Mesh - Clear FEM Mesh + Ачысціць паліганальную сетку МКЭ Clears the mesh of a FEM mesh object - Clears the mesh of a FEM mesh object + Ачышчае паліганальную сетку аб'екта паліганальнай сеткі МКЭ @@ -7626,12 +7621,12 @@ No matching module was found in the current Python path. Mesh Group - Mesh Group + Суполка паліганальнай сеткі Creates a mesh group - Creates a mesh group + Стварае суполку паліганальнай сеткі @@ -7639,12 +7634,12 @@ No matching module was found in the current Python path. Show Result - Show Result + Паказаць вынік Shows and visualizes the selected result data - Shows and visualizes the selected result data + Паказвае і візуалізуе абраныя выніковыя дадзеныя @@ -7652,12 +7647,12 @@ No matching module was found in the current Python path. Purge Results - Purge Results + Ачысціць вынікі Purges all results from the active analysis - Purges all results from the active analysis + Ачышчае ўсе вынікі бягучага даследавання @@ -7665,12 +7660,12 @@ No matching module was found in the current Python path. Glyph Filter - Glyph Filter + Фільтр гліфаў Adds a post-processing filter that adds glyphs to the mesh vertices for vertex data visualization - Adds a post-processing filter that adds glyphs to the mesh vertices for vertex data visualization + Дадае фільтр пасляапрацоўкі, які дадае гліфы да вяршынь паліганальнай сеткі для візуалізацыі дадзеных пра вяршыні @@ -7685,28 +7680,28 @@ No matching module was found in the current Python path. Data Summary - Data Summary + Зводка дадзеных Show Data - Show Data + Паказаць дадзеныя Data used in - Data used in + Дадзеныя, якія ўжытыя ў Add data to - Add data to + Дадаць дадзеныя ў Create and add - Create and add + Стварыць і дадаць @@ -7722,7 +7717,7 @@ No matching module was found in the current Python path. Outline draw style (None does not draw outlines) - Outline draw style (None does not draw outlines) + Стыль чарчэння контураў (налада 'Не' не малюе контуры) @@ -7736,13 +7731,13 @@ No matching module was found in the current Python path. Width of all lines (outline and hatch) - Width of all lines (outline and hatch) + Шырыня ўсіх ліній (контур і штрыхоўка) Hatch pattern - Hatch pattern + Шаблон штрыхоўкі @@ -7752,18 +7747,18 @@ No matching module was found in the current Python path. Density of hatch pattern - Density of hatch pattern + Шчыльнасць шаблону штрыхоўкі Bars - Bars + Панэлі Legend - Legend + Легенда diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index c4453bfe9c..5acaf9f2a7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -1713,14 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Llocs màxims a la matriu de rigidesa. -És possible que hàgiu d'augmentar-ho en utilitzar -el solucionador de Cholesky i obtingueu el missatge -d'error que s'ha d'augmentar "MAXGS". + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Error d'entrada @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Error d'entrada @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Error d'entrada @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Error de selecció @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Només hi ha una cara mestra i una cara esclava per a una restricció de contacte! - - - + + + Nothing selected! No s'ha seleccionat cap element. @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! L'objecte seleccionat no és una peça. - - - Only faces can be picked - Únicament es poden seleccionar cares + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Només hi ha una mestra per a una restricció de contacte! - + Only one master face for a contact constraint! Només hi ha una cara mestra per a una restricció de contacte! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Error de selecció - + Nothing selected! No s'ha seleccionat cap element. - + Selected object is not a part! L'objecte seleccionat no és una peça. - - - Selection must only consist of faces! - La selecció només ha de contenir cares! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Error de selecció - + Nothing selected! No s'ha seleccionat cap element. - + Selected object is not a part! L'objecte seleccionat no és una peça. - - Only faces can be picked - Únicament es poden seleccionar cares + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index f8602c9483..fd472c1da7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -1712,12 +1712,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximální počet bodů v matici tuhosti. -Pokud při použití Choleského řešiče obdržíte chybovou zprávu, že "MAXGS" je potřeba zvýšit, navyšte tuto hodnotu. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1813,7 +1815,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Chyba zadání @@ -1853,7 +1855,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Chyba zadání @@ -1869,7 +1871,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Chyba zadání @@ -2011,17 +2013,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Chyba výběru @@ -2032,15 +2034,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Pouze jedna hlavní plocha a jedna podřízená plocha pro vazbu kontaktu! - - - + + + Nothing selected! Nic není vybráno! @@ -2052,25 +2054,25 @@ Specify another file. - - - + + + Selected object is not a part! Vybraný objekt není součást! - - - Only faces can be picked - Mohou být vybrány jen plochy + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Pouze jeden master pro vazbu kontaktu! - + Only one master face for a contact constraint! Pouze jedna hlavní plocha pro vazbu kontaktu! @@ -2332,30 +2334,30 @@ Specify another file. - - - - + + + + Selection error Chyba výběru - + Nothing selected! Nic není vybráno! - + Selected object is not a part! Vybraný objekt není součást! - - - Selection must only consist of faces! - Výběr se smí obsahovat pouze plochy! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2406,28 +2408,28 @@ Specify another file. - - - + + + Selection error Chyba výběru - + Nothing selected! Nic není vybráno! - + Selected object is not a part! Vybraný objekt není součást! - - Only faces can be picked - Mohou být vybrány jen plochy + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 74908e1741..f3634d028a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -655,7 +655,7 @@ Make Spring Constraint - Make Spring Constraint + Feder-Randbedingung erstellen @@ -1706,12 +1706,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximale Anzahl an Punkten in einer Steifigkeitsmatrix. -Wenn die Fehlermeldung "MAXGS", bei der Verwendung des Cholesky Solvers, angezeigt wird, muss dieser Wert erhöht werden. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1809,7 +1811,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Eingabefehler @@ -1849,7 +1851,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Eingabefehler @@ -1865,7 +1867,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Eingabefehler @@ -1936,7 +1938,7 @@ Specify another file. Analysis Feature Properties - Analysis Feature Properties + Eigenschaften des Analyseelements @@ -2007,17 +2009,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Auswahlfehler @@ -2028,15 +2030,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Nur eine Hauptfläche und eine untergeordnete Fläche für eine Kontakt-Randbedingung! - - - + + + Nothing selected! Nichts ausgewählt! @@ -2048,25 +2050,25 @@ Specify another file. - - - + + + Selected object is not a part! Ausgewähltes Objekt ist kein Teil! - - - Only faces can be picked - Es können nur Flächen ausgewählt werden + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Nur ein Master für eine Kontakt-Randbedingung! - + Only one master face for a contact constraint! Nur eine Hauptfläche für eine Kontakt-Randbedingung! @@ -2328,30 +2330,30 @@ Specify another file. - - - - + + + + Selection error Auswahlfehler - + Nothing selected! Nichts ausgewählt! - + Selected object is not a part! Ausgewähltes Objekt ist kein Teil! - - - Selection must only consist of faces! - Auswahl darf nur aus Flächen bestehen! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2402,28 +2404,28 @@ Specify another file. - - - + + + Selection error Auswahlfehler - + Nothing selected! Nichts ausgewählt! - + Selected object is not a part! Ausgewähltes Objekt ist kein Teil! - - Only faces can be picked - Es können nur Flächen ausgewählt werden + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked @@ -3281,7 +3283,7 @@ Hinweis: Hat keine Auswirkung, wenn ein Festkörper ausgewählt wurde Analysis Feature Properties - Analysis Feature Properties + Eigenschaften des Analyseelements @@ -5759,7 +5761,7 @@ Bitte zuerst einen Ergebnistyp auswählen. Result mesh is empty - Result mesh is empty + Ergebnisnetz ist leer @@ -7874,7 +7876,7 @@ No matching module was found in the current Python path. Name of the object - Name of the object + Name des Objekts diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 23a4c662de..1e6a94c289 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -1713,11 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Μέγιστες θέσεις στη μήτρα ακαμψίας. Ίσως, χρειαστεί να το αυξήσετε όταν χρησιμοποιείτε το Cholesky και λαμβάνετε το μήνυμα σφάλματος ότι το "MAXGS" πρέπει να αυξηθεί. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1815,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Σφάλμα εισαγωγής @@ -1855,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Σφάλμα εισαγωγής @@ -1871,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Σφάλμα εισαγωγής @@ -2013,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Σφάλμα επιλογής @@ -2034,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Τίποτα δεν επιλέχθηκε! @@ -2054,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Το επιλεγμένο αντικείμενο δεν είναι εξάρτημα! - - - Only faces can be picked - Μόνο όψεις μπορούν να επιλεχθούν + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2334,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Σφάλμα επιλογής - + Nothing selected! Τίποτα δεν επιλέχθηκε! - + Selected object is not a part! Το επιλεγμένο αντικείμενο δεν είναι εξάρτημα! - - - Selection must only consist of faces! - Η επιλογή πρέπει να αποτελείται μόνο από Επιφάνειες! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2408,28 +2411,28 @@ Specify another file. - - - + + + Selection error Σφάλμα επιλογής - + Nothing selected! Τίποτα δεν επιλέχθηκε! - + Selected object is not a part! Το επιλεγμένο αντικείμενο δεν είναι εξάρτημα! - - Only faces can be picked - Μόνο όψεις μπορούν να επιλεχθούν + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 8863b12e2b..6ed5b33f1a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -1713,14 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Lugares máximos en la matriz de rigidez. -Puede que necesite aumentar esto cuando uses el -solver de Cholesky y reciba el mensaje de error -de que "MAXGS" necesita ser aumentado. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Error de entrada @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Error de entrada @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Error de entrada @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Error de selección @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! ¡Solo una cara maestra y una cara esclavizada para una restricción de contacto! - - - + + + Nothing selected! ¡Nada seleccionado! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! ¡El objeto seleccionado no es una pieza! - - - Only faces can be picked - Se pueden seleccionar caras únicamente + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! ¡Solo un maestro por una restricción de contacto! - + Only one master face for a contact constraint! ¡Solo una cara maestra para restricción de contacto! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Error de selección - + Nothing selected! ¡Nada seleccionado! - + Selected object is not a part! ¡El objeto seleccionado no es una pieza! - - - Selection must only consist of faces! - ¡La selección solo debe consistir en caras! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Error de selección - + Nothing selected! ¡Nada seleccionado! - + Selected object is not a part! ¡El objeto seleccionado no es una pieza! - - Only faces can be picked - Se pueden seleccionar caras únicamente + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 16ca5ad47a..61f975e428 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -1713,14 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Kokagune kopuru maximoa zurruntasun-matrizean. -Hau handitu behar izan daiteke Cholesky ebazlea -erabiltzean "MAXGS" handitu behar dela -dioen mezua jasotzen bada. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Sarrera-errorea @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Sarrera-errorea @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Sarrera-errorea @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Hautapen-errorea @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Aurpegi nagusi bakarra eta mendeko aurpegi bakarra kontaktu-murrizketako! - - - + + + Nothing selected! Ez da ezer hautatu! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Hautatutako objektua ez da pieza bat! - - - Only faces can be picked - Aurpegiak soilik aukera daitezke + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Nagusi bakarra kontaktu-murrizketako! - + Only one master face for a contact constraint! Aurpegi nagusi bakarra kontaktu-murrizketako! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Hautapen-errorea - + Nothing selected! Ez da ezer hautatu! - + Selected object is not a part! Hautatutako objektua ez da pieza bat! - - - Selection must only consist of faces! - Hautapenean aurpegiak soilik onartzen dira! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Hautapen-errorea - + Nothing selected! Ez da ezer hautatu! - + Selected object is not a part! Hautatutako objektua ez da pieza bat! - - Only faces can be picked - Aurpegiak soilik aukera daitezke + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index dcf11b066a..9a6d0522bc 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Syötteen virhe @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Syötteen virhe @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Syötteen virhe @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Valintavirhe @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Mitään ei ole valittu! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Valittu objekti ei ole osa (part)! - - - Only faces can be picked - Vain tahkoja voidaan poimia + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Valintavirhe - + Nothing selected! Mitään ei ole valittu! - + Selected object is not a part! Valittu objekti ei ole osa (part)! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Valintavirhe - + Nothing selected! Mitään ei ole valittu! - + Selected object is not a part! Valittu objekti ei ole osa (part)! - - Only faces can be picked - Vain tahkoja voidaan poimia + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index f0d6585550..871c29044e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -1704,13 +1704,14 @@ Spécifier un autre fichier - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Taille maximale dans la matrice de raideur. -Vous pouvez avoir besoin d'augmenter cette valeur lorsque vous utilisez le solveur Cholesky -et que vous avez le message d'erreur que "MAXGS" doit être augmenté. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1803,7 +1804,7 @@ Spécifier un autre fichier FemGui::TaskDlgFemConstraintContact - + Input error Erreur de saisie @@ -1843,7 +1844,7 @@ Spécifier un autre fichier FemGui::TaskDlgFemConstraintHeatflux - + Input error Erreur de saisie @@ -1859,7 +1860,7 @@ Spécifier un autre fichier FemGui::TaskDlgFemConstraintPressure - + Input error Erreur de saisie @@ -2001,17 +2002,17 @@ Spécifier un autre fichier - - - - - - - - - - - + + + + + + + + + + + Selection error Erreur de sélection @@ -2022,15 +2023,15 @@ Spécifier un autre fichier - + Only one master face and one slave face for a contact constraint! Une seule face maître et une seule face esclave pour une contrainte de contact! - - - + + + Nothing selected! Aucune sélection ! @@ -2042,25 +2043,25 @@ Spécifier un autre fichier - - - + + + Selected object is not a part! L'objet sélectionné n'est pas un élément ! - - - Only faces can be picked - Seules des faces peuvent être selectionnées + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Un seul maître pour une contrainte de contact! - + Only one master face for a contact constraint! Une seule face maître pour une contrainte de contact! @@ -2322,30 +2323,30 @@ Spécifier un autre fichier - - - - + + + + Selection error Erreur de sélection - + Nothing selected! Rien n'a été sélectionné ! - + Selected object is not a part! L'objet sélectionné n'est pas une pièce ! - - - Selection must only consist of faces! - La sélection ne doit se composer que de faces ! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2383,7 +2384,7 @@ Spécifier un autre fichier Only faces can be picked - Seules des faces peuvent être sélectionnées + Seules des faces peuvent être selectionnées @@ -2396,28 +2397,28 @@ Spécifier un autre fichier - - - + + + Selection error Erreur de sélection - + Nothing selected! Rien n'a été sélectionné ! - + Selected object is not a part! L'objet sélectionné n'est pas une pièce ! - - Only faces can be picked - Seules des faces peuvent être sélectionnées + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 79a55c34ec..229cb6ff09 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -1714,14 +1714,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maksimalan broj mjesta u matrici krutosti. -Možda ćete to morati povećati kada koristite -Choleskyov rješavač i dobijete poruku o pogrešci -da se "MAXGS" mora povećati." + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1819,7 +1819,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Pogreška na ulazu @@ -1859,7 +1859,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Pogreška na ulazu @@ -1875,7 +1875,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Pogreška na ulazu @@ -2017,17 +2017,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Greška odabira @@ -2038,15 +2038,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Samo jedna glavna površina i jedna podređena površina za ograničenje kontakta! - - - + + + Nothing selected! Ništa nije odabrano! @@ -2058,25 +2058,25 @@ Specify another file. - - - + + + Selected object is not a part! Odabrani objekt nije jedan dio! - - - Only faces can be picked - Samo naličja se mogu odabrati + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Samo jedan glavni za ograničenje kontakta! - + Only one master face for a contact constraint! Samo jedna glavna površina za ograničenje kontakta! @@ -2338,30 +2338,30 @@ Specify another file. - - - - + + + + Selection error Greška odabira - + Nothing selected! Ništa nije odabrano! - + Selected object is not a part! Odabrani objekt nije jedan dio! - - - Selection must only consist of faces! - Odabrati možete samo plohe! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2412,28 +2412,28 @@ Specify another file. - - - + + + Selection error Greška odabira - + Nothing selected! Ništa nije odabrano! - + Selected object is not a part! Odabrani objekt nije jedan dio! - - Only faces can be picked - Samo naličja se mogu odabrati + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 4f010dafe7..6aba8b334b 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -1708,12 +1708,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - A merevségi mátrix pontjainak maximális száma. -Ha a Cholesky megoldó használatakor a "MAXGS" hibaüzenet jelenik meg, ezt az értéket növelni kell. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1811,7 +1813,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Bemeneti hiba @@ -1851,7 +1853,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Bemeneti hiba @@ -1867,7 +1869,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Bemeneti hiba @@ -2009,17 +2011,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Kiválasztási hiba @@ -2030,15 +2032,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Csak egy fő felület és egy másodlagos felület a kényszer érintkezéséhez! - - - + + + Nothing selected! Semmi sincs kiválasztva! @@ -2050,25 +2052,25 @@ Specify another file. - - - + + + Selected object is not a part! A kijelölt objektum nem alkotórész! - - - Only faces can be picked - Csak felületek választhatók ki + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Csak egy mester egy érintkezési kényszerhez! - + Only one master face for a contact constraint! Csak egy fő felület a kényszer érintkezéséhez! @@ -2330,30 +2332,30 @@ Specify another file. - - - - + + + + Selection error Kiválasztási hiba - + Nothing selected! Semmi sincs kiválasztva! - + Selected object is not a part! A kijelölt objektum nem alkatrész! - - - Selection must only consist of faces! - A kiválasztás csak felületekből állhat! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2404,28 +2406,28 @@ Specify another file. - - - + + + Selection error Kiválasztási hiba - + Nothing selected! Semmi sincs kiválasztva! - + Selected object is not a part! A kijelölt objektum nem alkatrész! - - Only faces can be picked - Csak felületek választhatók ki + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked @@ -6972,7 +6974,7 @@ No matching module was found in the current Python path. … - … + … diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 09fdb54447..d7b5416ff9 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -1713,14 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Numero massimo di punti in una matrice di rigidità. -Potrebbe essere necessario aumentare questo valore -quando si utilizza il solutore Cholesky e si ottiene il -messaggio di errore che "MAXGS" deve essere aumentato. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Errore di input @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Errore di input @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Errore di input @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Errore di selezione @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Solo una faccia principale e una faccia secondaria per un vincolo di contatto! - - - + + + Nothing selected! Nessuna selezione! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! L'oggetto selezionato non è una parte! - - - Only faces can be picked - Si possono selezionare solo le facce + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Solo un master per un vincolo di contatto! - + Only one master face for a contact constraint! Solo una faccia principale per un vincolo di contatto! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Errore di selezione - + Nothing selected! Nessuna selezione! - + Selected object is not a part! L'oggetto selezionato non è una parte! - - - Selection must only consist of faces! - La selezione deve contenere solo facce! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Errore di selezione - + Nothing selected! Nessuna selezione! - + Selected object is not a part! L'oggetto selezionato non è una parte! - - Only faces can be picked - Si possono selezionare solo le facce + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 6ec87b6da5..b2c4de37c6 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -1702,13 +1702,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - 剛性行列の最大位置。 - -コレスキーソルバーを使用していて「MAXGS」を増やす必要があるというエラーメッセージが表示される場合は、これを増やす必要があるかもしれません。 + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1804,7 +1805,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error 入力エラー @@ -1844,7 +1845,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error 入力エラー @@ -1860,7 +1861,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error 入力エラー @@ -2002,17 +2003,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error 選択エラー @@ -2023,15 +2024,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! 接触拘束に使用できるのは1つのマスター面と1つのスレーブ面だけです! - - - + + + Nothing selected! 何も選択されていません! @@ -2043,25 +2044,25 @@ Specify another file. - - - + + + Selected object is not a part! 選択されたオブジェクトはパーツではありません！ - - - Only faces can be picked - 面のみを選択できます。 + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! 接触拘束に使用できるのは1つのマスターだけです! - + Only one master face for a contact constraint! 接触拘束に使用できるのは1つのマスター面だけです! @@ -2323,30 +2324,30 @@ Specify another file. - - - - + + + + Selection error 選択エラー - + Nothing selected! 何も選択されていません! - + Selected object is not a part! 選択されたオブジェクトはパーツではありません！ - - - Selection must only consist of faces! - 面のみを選択する必要があります! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2397,28 +2398,28 @@ Specify another file. - - - + + + Selection error 選択エラー - + Nothing selected! 何も選択されていません! - + Selected object is not a part! 選択されたオブジェクトはパーツではありません！ - - Only faces can be picked - 面のみを選択できます。 + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index d9eebb5e86..e621010a2d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -1708,14 +1708,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - მაქსიმალური ადგილები სიმყიფის მატრიცაში. -შეიძლება დაგჭირდეთ ამ პარამეტრის გაზრდა, როცა -ქოლესკის ამომხსნელს იყენებთ და იღებთ შეცდომას, რომ -საჭიროა "MAXGS"-ის გაზრდა. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1813,7 +1813,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error შეყვანის შეცდომა @@ -1853,7 +1853,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error შეყვანის შეცდომა @@ -1869,7 +1869,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error შეყვანის შეცდომა @@ -2011,17 +2011,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error მონიშნულის შეცდომა @@ -2032,15 +2032,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! კონტაქტის შეზღუდვას მხოლოდ ერთი მთავარი და ერთი მეორადი ზედაპირი შეიძლება ჰქონდეს! - - - + + + Nothing selected! არაფერია მონიშნული! @@ -2052,25 +2052,25 @@ Specify another file. - - - + + + Selected object is not a part! მონიშნული ობიექტი ნაწილი არაა! - - - Only faces can be picked - შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! კონტაქტის შეზღუდვას მხოლოდ ერთი მთავარი ობიექტი შეიძლება ჰქონდეს! - + Only one master face for a contact constraint! კონტაქტის შეზღუდვას მხოლოდ ერთი მთავარი ზედაპირი შეიძლება ჰქონდეს! @@ -2332,30 +2332,30 @@ Specify another file. - - - - + + + + Selection error მონიშნულის შეცდომა - + Nothing selected! არაფერია მონიშნული! - + Selected object is not a part! მონიშნული ობიექტი ნაწილი არაა! - - - Selection must only consist of faces! - აირჩიეთ მხოლოდ ზედაპირები! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2406,28 +2406,28 @@ Specify another file. - - - + + + Selection error მონიშნულის შეცდომა - + Nothing selected! არაფერია მონიშნული! - + Selected object is not a part! მონიშნული ობიექტი ნაწილი არაა! - - Only faces can be picked - შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked @@ -7198,7 +7198,7 @@ No matching module was found in the current Python path. Bins - Bins + უჯრედები @@ -7764,7 +7764,7 @@ No matching module was found in the current Python path. Bars - Bars + პანელები diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index 6db97e5b0d..105e6b282f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error 입력 오류 @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error 입력 오류 @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error 입력 오류 @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Selection error @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Nothing selected! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Selected object is not a part! - - - Only faces can be picked - Only faces can be picked + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Selection error - + Nothing selected! Nothing selected! - + Selected object is not a part! Selected object is not a part! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Selection error - + Nothing selected! Nothing selected! - + Selected object is not a part! Selected object is not a part! - - Only faces can be picked - Only faces can be picked + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index 80208a2bb4..33c0cc316c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Invoerfout @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Invoerfout @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Invoerfout @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Selectiefout @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Niets geselecteerd! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Geselecteerd object is geen deel! - - - Only faces can be picked - Alleen vlakken kunnen geselecteerd worden + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Selectiefout - + Nothing selected! Niets geselecteerd! - + Selected object is not a part! Geselecteerd object is geen deel! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Selectiefout - + Nothing selected! Niets geselecteerd! - + Selected object is not a part! Geselecteerd object is geen deel! - - Only faces can be picked - Alleen vlakken kunnen geselecteerd worden + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index a77bd42864..f08257071a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -1714,14 +1714,14 @@ Wskaż inny plik. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maksymalna liczba miejsc w macierzy sztywności. -Być może będziesz musiał to zwiększyć, gdy używasz -solvera Cholesky i otrzymasz komunikat o błędzie, -że "MAXGS" musi zostać zwiększony. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1819,7 +1819,7 @@ Wskaż inny plik. FemGui::TaskDlgFemConstraintContact - + Input error Błąd danych wejściowych @@ -1859,7 +1859,7 @@ Wskaż inny plik. FemGui::TaskDlgFemConstraintHeatflux - + Input error Błąd danych wejściowych @@ -1875,7 +1875,7 @@ Wskaż inny plik. FemGui::TaskDlgFemConstraintPressure - + Input error Błąd danych wejściowych @@ -2017,17 +2017,17 @@ Wskaż inny plik. - - - - - - - - - - - + + + + + + + + + + + Selection error Błąd zaznaczenia @@ -2038,15 +2038,15 @@ Wskaż inny plik. - + Only one master face and one slave face for a contact constraint! Tylko jedna powierzchnia główna i jedna powierzchnia drugorzędna dla kontaktu! - - - + + + Nothing selected! Nic nie wybrano! @@ -2058,25 +2058,25 @@ Wskaż inny plik. - - - + + + Selected object is not a part! Wybrany obiekt nie jest częścią! - - - Only faces can be picked - Można wybrać tylko ściany + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Tylko jedna powierzchnia główna dla kontaktu! - + Only one master face for a contact constraint! Tylko jedna powierzchnia główna dla kontaktu! @@ -2338,30 +2338,30 @@ Wskaż inny plik. - - - - + + + + Selection error Błąd wyboru - + Nothing selected! Nic nie wybrano! - + Selected object is not a part! Wybrany obiekt nie jest częścią! - - - Selection must only consist of faces! - Wybór musi składać się tylko z powierzchni! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2412,28 +2412,28 @@ Wskaż inny plik. - - - + + + Selection error Błąd wyboru - + Nothing selected! Nic nie wybrano! - + Selected object is not a part! Wybrany obiekt nie jest częścią! - - Only faces can be picked - Można wybrać tylko ściany + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked @@ -2558,7 +2558,7 @@ Wskaż inny plik. Only faces can be picked - Można wybrać tylko powierzchnie + Można wybrać tylko ściany diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index e6fd503759..d14b62cfb0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -1711,14 +1711,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Locais máximos na matriz de rigidez. -Você pode precisar aumentar isso ao usar o -Solver Cholesky e você receberá uma mensagem de erro -que "MAXGS" precisa ser aumentada. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1816,7 +1816,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Erro de entrada @@ -1856,7 +1856,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Erro de entrada @@ -1872,7 +1872,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Erro de entrada @@ -2014,17 +2014,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Erro de seleção @@ -2035,15 +2035,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Apenas uma face mestre e uma face subordinada para restrição de contato! - - - + + + Nothing selected! Nada selecionado! @@ -2055,25 +2055,25 @@ Specify another file. - - - + + + Selected object is not a part! O objeto selecionado não é uma peça! - - - Only faces can be picked - Somente as faces podem ser selecionadas + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Apenas um mestre para restrições de contato! - + Only one master face for a contact constraint! Apenas uma face mestre para restrições de contato! @@ -2335,30 +2335,30 @@ Specify another file. - - - - + + + + Selection error Erro de seleção - + Nothing selected! Nada selecionado! - + Selected object is not a part! O objeto selecionado não é uma peça! - - - Selection must only consist of faces! - A seleção deve conter apenas faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2409,28 +2409,28 @@ Specify another file. - - - + + + Selection error Erro de seleção - + Nothing selected! Nada selecionado! - + Selected object is not a part! O objeto selecionado não é uma peça! - - Only faces can be picked - Somente as faces podem ser selecionadas + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index d1466aa4b1..84f50ebc3d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Eroare de intrare @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Eroare de intrare @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Eroare de intrare @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Eroare de selecție @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Nicio selecție! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Obiectul selectat nu este o Part! - - - Only faces can be picked - Numai fețele pot fi ridicate + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Eroare de selecție - + Nothing selected! Nicio selecție! - + Selected object is not a part! Obiectul selectat nu este o Part! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Eroare de selecție - + Nothing selected! Nicio selecție! - + Selected object is not a part! Obiectul selectat nu este o Part! - - Only faces can be picked - Numai fețele pot fi ridicate + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index f6bf2ba6b4..eec339bbda 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -1708,12 +1708,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Максимальный размер матрицы жесткости. -Возможно, вам потребуется увеличить это значение при использовании решателя Холецкого, иначе вы получите сообщение об ошибке, что «MAXGS» необходимо увеличить. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1812,7 +1814,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Ошибка ввода @@ -1852,7 +1854,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Ошибка ввода @@ -1868,7 +1870,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Ошибка ввода @@ -2010,17 +2012,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Ошибка выбора @@ -2031,15 +2033,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Только одна основная геометрическая грань и одна зависимая геометрическая грань для ограничения связи! - - - + + + Nothing selected! Ничего не выбрано! @@ -2051,25 +2053,25 @@ Specify another file. - - - + + + Selected object is not a part! Выделенный объект не является деталью! - - - Only faces can be picked - Можно выбрать только грани + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Только один мастер для ограничения контакта! - + Only one master face for a contact constraint! Только одно главное лицо для ограничения контакта! @@ -2331,30 +2333,30 @@ Specify another file. - - - - + + + + Selection error Ошибка выбора - + Nothing selected! Ничего не выбрано! - + Selected object is not a part! Выделенный объект не является деталью! - - - Selection must only consist of faces! - Выбирать можно только грани! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2405,28 +2407,28 @@ Specify another file. - - - + + + Selection error Ошибка выбора - + Nothing selected! Ничего не выбрано! - + Selected object is not a part! Выделенный объект не является деталью! - - Only faces can be picked - Можно выбрать только грани + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index f54ccf3acd..327670b85a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Napaka vnosa @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Napaka vnosa @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Napaka vnosa @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Napaka izbire @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! Nič ni izbrano! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Izbrani predmet ni del! - - - Only faces can be picked - Izberete lahko samo ploskve + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Napaka izbire - + Nothing selected! Nič ni izbrano! - + Selected object is not a part! Izbrani predmet ni del! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Napaka izbire - + Nothing selected! Nič ni izbrano! - + Selected object is not a part! Izbrani predmet ni del! - - Only faces can be picked - Izberete lahko samo ploskve + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts index 45b11158be..2766ecc4c6 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Input error @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Input error @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Input error @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Greška prilikom izbora @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Samo jedna glavna stranica i jedna sporedna stranica za ograničenje kontakta! - - - + + + Nothing selected! Ništa nije izabrano! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Izabrani objekat nije deo! - - - Only faces can be picked - Mogu ce birati samo stranice + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Samo jedan glavni za ograničenje kontakta! - + Only one master face for a contact constraint! Samo jedna glavna stranica za ograničenje kontakta! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Greška prilikom izbora - + Nothing selected! Ništa nije izabrano! - + Selected object is not a part! Izabrani objekat nije deo! - - - Selection must only consist of faces! - Možete izabrati samo stranice! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Greška prilikom izbora - + Nothing selected! Ništa nije izabrano! - + Selected object is not a part! Izabrani objekat nije deo! - - Only faces can be picked - Mogu ce birati samo stranice + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index 377a6070ef..329c8e092e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Грешка приликом уноса @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Грешка приликом уноса @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Грешка приликом уноса @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Грешка приликом избора @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Само једна главна страница и једна споредна страница за ограничење контакта! - - - + + + Nothing selected! Ништа није изабрано! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Изабрани објекат није део! - - - Only faces can be picked - Могу се бирати само странице + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Само један главни за ограничење контакта! - + Only one master face for a contact constraint! Само једна главна страница за ограничење контакта! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Грешка приликом избора - + Nothing selected! Ништа није изабрано! - + Selected object is not a part! Изабрани објекат није део! - - - Selection must only consist of faces! - Можете изабрати само странице! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Грешка приликом избора - + Nothing selected! Ништа није изабрано! - + Selected object is not a part! Изабрани објекат није део! - - Only faces can be picked - Могу се бирати само странице + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 257a44ae11..cd525f84c1 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -1713,14 +1713,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximala platser i stiffnesmatrisen. -Du kan behöva öka detta när du använder -Cholesky-lösaren och du får felmeddelandet -att "MAXGS" behöver ökas. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Inmatningsfel @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Inmatningsfel @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Inmatningsfel @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Markeringsfel @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Endast en masteryta och en slavyta för en kontaktbegränsning! - - - + + + Nothing selected! Inget markerat! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! Markerad objekt är inte en komponent! - - - Only faces can be picked - Endast ytor kan väljas + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Endast en master för en kontaktbegränsning! - + Only one master face for a contact constraint! Endast ett masterface för en kontaktbegränsning! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error Markeringsfel - + Nothing selected! Inget markerat! - + Selected object is not a part! Markerad objekt är inte en komponent! - - - Selection must only consist of faces! - Urvalet får bara bestå av ansikten! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error Markeringsfel - + Nothing selected! Inget markerat! - + Selected object is not a part! Markerad objekt är inte en komponent! - - Only faces can be picked - Endast ytor kan väljas + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 8c2c19de18..8bce6d6548 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -1708,13 +1708,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1813,7 +1813,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Girdi hatası @@ -1853,7 +1853,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Girdi hatası @@ -1869,7 +1869,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Girdi hatası @@ -2011,17 +2011,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Seçim hatası @@ -2032,15 +2032,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Bir iletişim kısıtlaması için yalnızca bir asıl geometrik yüz ve bir bağımlı geometrik yüz! - - - + + + Nothing selected! Seçim yok! @@ -2052,25 +2052,25 @@ Specify another file. - - - + + + Selected object is not a part! Temel nesne bir parçası olmadığını! - - - Only faces can be picked - Sadece modelin yüzleri seçilebilir + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Bir iletişim kısıtlaması için yalnızca bir asıl yönetici! - + Only one master face for a contact constraint! Bir iletişim kısıtlaması için yalnızca bir asıl geometrik yüz! @@ -2332,30 +2332,30 @@ Specify another file. - - - - + + + + Selection error Seçim hatası - + Nothing selected! Seçim yok! - + Selected object is not a part! Temel nesne bir parçası olmadığını! - - - Selection must only consist of faces! - Seçim sadece yüzlerden oluşmalıdır! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2406,28 +2406,28 @@ Specify another file. - - - + + + Selection error Seçim hatası - + Nothing selected! Seçim yok! - + Selected object is not a part! Temel nesne bir parçası olmadığını! - - Only faces can be picked - Sadece modelin yüzleri seçilebilir + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index a44a716a64..609c47481e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -1715,14 +1715,14 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Максимальне місце матриці стіффнів. -Можливо вам доведеться збільшити це, при використанні -розв'язувача Холеського, і ви отримаєте повідомлення про помилку -, що "МАКГС" потрібно збільшити. + Maximum places in the stiffness matrix. +You might need to increase this when using the +Cholesky solver and getting the error message +that "MAXGS" needs to be increased. @@ -1820,7 +1820,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error Помилка вводу @@ -1860,7 +1860,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error Помилка вводу @@ -1876,7 +1876,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error Помилка вводу @@ -2018,17 +2018,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error Помилка виділення @@ -2039,15 +2039,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Тільки одна основна та одна допоміжна грані для обмеження контакту! - - - + + + Nothing selected! Нічого не вибрано! @@ -2059,25 +2059,25 @@ Specify another file. - - - + + + Selected object is not a part! Вибраний об'єкт не є деталлю! - - - Only faces can be picked - Можливо обрати лише грані + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Тільки один майстер для обмеження контактів! - + Only one master face for a contact constraint! Тільки одна основна грань для обмеження контакту! @@ -2339,30 +2339,30 @@ Specify another file. - - - - + + + + Selection error Помилка виділення - + Nothing selected! Нічого не вибрано! - + Selected object is not a part! Вибраний об'єкт не є деталлю! - - - Selection must only consist of faces! - Відбір повинен складатися тільки з граней! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2400,7 +2400,7 @@ Specify another file. Only faces can be picked - Можна вибирати тільки грані + Можливо обрати лише грані @@ -2413,28 +2413,28 @@ Specify another file. - - - + + + Selection error Помилка виділення - + Nothing selected! Нічого не вибрано! - + Selected object is not a part! Вибраний об'єкт не є деталлю! - - Only faces can be picked - Можна вибирати тільки грані + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index ee798d1556..6cf1c605e7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error 输入错误 @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error 输入错误 @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error 输入错误 @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error 选择错误 @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! 未选择任何内容 ！ @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! 所选之物件并非零件! - - - Only faces can be picked - 仅可以选取面 + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! 接触约束只能有一个主面！ @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error 选择错误 - + Nothing selected! 未选择任何内容 ！ - + Selected object is not a part! 所选之物件并非零件! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error 选择错误 - + Nothing selected! 未选择任何内容 ！ - + Selected object is not a part! 所选之物件并非零件! - - Only faces can be picked - 仅可以选取面 + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 11014efc01..e8d8ced0fa 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -1713,13 +1713,13 @@ Specify another file. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. + Maximum places in the stiffness matrix. You might need to increase this when using the -Cholesky solver and you get the error message +Cholesky solver and getting the error message that "MAXGS" needs to be increased. @@ -1818,7 +1818,7 @@ Specify another file. FemGui::TaskDlgFemConstraintContact - + Input error 輸入錯誤 @@ -1858,7 +1858,7 @@ Specify another file. FemGui::TaskDlgFemConstraintHeatflux - + Input error 輸入錯誤 @@ -1874,7 +1874,7 @@ Specify another file. FemGui::TaskDlgFemConstraintPressure - + Input error 輸入錯誤 @@ -2016,17 +2016,17 @@ Specify another file. - - - - - - - - - - - + + + + + + + + + + + Selection error 選取錯誤 @@ -2037,15 +2037,15 @@ Specify another file. - + Only one master face and one slave face for a contact constraint! Only one master face and one slave face for a contact constraint! - - - + + + Nothing selected! 尚未選取 ! @@ -2057,25 +2057,25 @@ Specify another file. - - - + + + Selected object is not a part! 所選之物件並非零件 ! - - - Only faces can be picked - 僅可以選取面 + + + Only faces can be picked (edges in 2D models) + Only faces can be picked (edges in 2D models) - + Only one master for a contact constraint! Only one master for a contact constraint! - + Only one master face for a contact constraint! Only one master face for a contact constraint! @@ -2337,30 +2337,30 @@ Specify another file. - - - - + + + + Selection error 選取錯誤 - + Nothing selected! 尚未選取 ! - + Selected object is not a part! 所選之物件並非零件 ! - - - Selection must only consist of faces! - Selection must only consist of faces! + + + Selection must only consist of faces! (edges in 2D models) + Selection must only consist of faces! (edges in 2D models) @@ -2411,28 +2411,28 @@ Specify another file. - - - + + + Selection error 選取錯誤 - + Nothing selected! 尚未選取 ! - + Selected object is not a part! 所選之物件並非零件 ! - - Only faces can be picked - 僅可以選取面 + + Only faces (edges in 2D models) can be picked + Only faces (edges in 2D models) can be picked diff --git a/src/Mod/Help/Resources/translations/Help_ca.qm b/src/Mod/Help/Resources/translations/Help_ca.qm index d05887840a..026fd83afc 100644 Binary files a/src/Mod/Help/Resources/translations/Help_ca.qm and b/src/Mod/Help/Resources/translations/Help_ca.qm differ diff --git a/src/Mod/Help/Resources/translations/Help_ca.ts b/src/Mod/Help/Resources/translations/Help_ca.ts index 59997dfb1c..d8c98ea5d9 100644 --- a/src/Mod/Help/Resources/translations/Help_ca.ts +++ b/src/Mod/Help/Resources/translations/Help_ca.ts @@ -17,8 +17,8 @@ Fetches the documentation from pages rendered on GitHub. This is currently not available. - Fetches the documentation from pages rendered on GitHub. -This is currently not available. + Obtenir la documentació de les pàgines renderitzades a GitHub. +Actualment aquesta opció no està disponible. @@ -62,16 +62,15 @@ Documentation can be downloaded for offline use via the Addon Manager and instal "offline-documentation" addon. If this field is left blank, FreeCAD will automatically search for the help files at the default location ($USERAPPDATADIR/Mod/offline-documentation). - Set this to a custom URL or the folder where the help files are located. -Documentation can be downloaded for offline use via the Addon Manager and installing the -"offline-documentation" addon. If this field is left blank, FreeCAD will -automatically search for the help files at the default location -($USERAPPDATADIR/Mod/offline-documentation). + Establiu-ho a un URL personalitzat o a un directori on es troben els fitxers d'ajuda. +Podeu descarregar la documentació per utilitzar-la fora de línia mitjançant el Gestor de Complements i instal·lar el complement "documentació fora de línia". Si aquest camp es deixa en blanc, FreeCAD +buscarà automàticament els fitxers d'ajuda a +la ubicació per defecte ($USERAPPDATADIR/Mod/offline-documentation). Translation suffix - Translation suffix + Sufix de traducció @@ -101,41 +100,41 @@ custom stylesheet below and can look nicer than the wiki option. The 'Markd Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. - Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. + Nota: si el sistema no troba els components web PySide, les pàgines d'ajuda s'obriran al navegador web predeterminat, independentment de les opcions següents. The documentation will open in the default web browser - The documentation will open in the default web browser + El document s'obrirà amb el navegador per defecte In the default web browser - In the default web browser + En el navegador per defecte The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. - The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. + La documentació s'obrirà en una pestanya nova dins de la interfície FreeCAD. Això requereix el component QtWebengineWidgets de PySide. Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. Requires the PySide QtWebengineWidgets component. - Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. -Requires the PySide QtWebengineWidgets component. + La documentació s'obre en un diàleg acoblable dins de FreeCAD, que permet treballar simultàniament dins la vista 3D. +Necessita el component QtWebengineWidgets de PySide. Custom stylesheet - Custom stylesheet + Full d'estils personalitzat Specify the path to an alternative CSS file for styling Markdown pages. This only applies if Markdown is selected above. - Specify the path to an alternative CSS file for styling Markdown pages. -This only applies if Markdown is selected above. + Especifica la ruta d'un fitxer CSS alternatiu per a estilitzar les pàgines en Markdown. +Només aplica si s'ha seleccionat Markdown a sobre. @@ -158,12 +157,12 @@ This only applies if Markdown is selected above. Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help - Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help + No s'ha pogut obtenir el contingut d'aquesta pàgina. Si us plau, comprovi les preferències al menú Edita → Preferències → General → Ajuda Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help - Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help + No s'ha pogut determinar la ubicació dels fitxers d'ajuda. Si us plau, comprovi les preferències en el menú Editar- Preferències - General - Ajuda diff --git a/src/Mod/Help/Resources/translations/Help_de.qm b/src/Mod/Help/Resources/translations/Help_de.qm index d07697fcb9..6b85f67b66 100644 Binary files a/src/Mod/Help/Resources/translations/Help_de.qm and b/src/Mod/Help/Resources/translations/Help_de.qm differ diff --git a/src/Mod/Help/Resources/translations/Help_de.ts b/src/Mod/Help/Resources/translations/Help_de.ts index c8dbdc137c..bb53e5d059 100644 --- a/src/Mod/Help/Resources/translations/Help_de.ts +++ b/src/Mod/Help/Resources/translations/Help_de.ts @@ -58,11 +58,7 @@ Documentation can be downloaded for offline use via the Addon Manager and instal "offline-documentation" addon. If this field is left blank, FreeCAD will automatically search for the help files at the default location ($USERAPPDATADIR/Mod/offline-documentation). - Set this to a custom URL or the folder where the help files are located. -Documentation can be downloaded for offline use via the Addon Manager and installing the -"offline-documentation" addon. If this field is left blank, FreeCAD will -automatically search for the help files at the default location -($USERAPPDATADIR/Mod/offline-documentation). + Hier eine eigene URL oder den Ordner angeben, wo sich die Hilfedateien befinden. Die Dokumentation kann für die Offline-Verwendung mit dem Addon-Manager heruntergeladen und das "Offline-Documentation"-Addon installiert werden. Bleibt dieses Feld leer, wird FreeCAD die Hilfedateien automatisch an dem voreingestellten Ablageort suchen ($USERAPPDATADIR/Mod/offline-documentation). @@ -158,12 +154,12 @@ This only applies if Markdown is selected above. Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help - Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help + Inhalte für diese Seite konnten nicht abgerufen werden. Bitte die Einstellungen im Menü Bearbeiten → Einstellungen → Allgemein → Hilfe überprüfen Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help - Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help + Der Speicherort der Hilfedateien konnte nicht ermittelt werden. Bitte die Einstellungen im Menü Bearbeiten → Einstellungen → Allgemein → Hilfe überprüfen diff --git a/src/Mod/Help/Resources/translations/Help_pl.qm b/src/Mod/Help/Resources/translations/Help_pl.qm index 36f6672490..ce36217e31 100644 Binary files a/src/Mod/Help/Resources/translations/Help_pl.qm and b/src/Mod/Help/Resources/translations/Help_pl.qm differ diff --git a/src/Mod/Help/Resources/translations/Help_pl.ts b/src/Mod/Help/Resources/translations/Help_pl.ts index 2ac18b0f03..cec155329b 100644 --- a/src/Mod/Help/Resources/translations/Help_pl.ts +++ b/src/Mod/Help/Resources/translations/Help_pl.ts @@ -17,8 +17,8 @@ Fetches the documentation from pages rendered on GitHub. This is currently not available. - Fetches the documentation from pages rendered on GitHub. -This is currently not available. + Pobiera dokumentację ze stron renderowanych na GitHub. +To nie jest obecnie dostępne. @@ -60,16 +60,15 @@ Documentation can be downloaded for offline use via the Addon Manager and instal "offline-documentation" addon. If this field is left blank, FreeCAD will automatically search for the help files at the default location ($USERAPPDATADIR/Mod/offline-documentation). - Set this to a custom URL or the folder where the help files are located. -Documentation can be downloaded for offline use via the Addon Manager and installing the -"offline-documentation" addon. If this field is left blank, FreeCAD will -automatically search for the help files at the default location -($USERAPPDATADIR/Mod/offline-documentation). + Ustaw to na niestandardowy adres URL lub folder, w którym znajdują się pliki pomocy. +Dokumentację można pobrać do użytku offline, korzystając z Menedżera dodatków +i instalując dodatek "offline-documentation". Jeśli to pole pozostanie puste, FreeCAD automatycznie wyszuka +pliki pomocy w domyślnej lokalizacji ($USERAPPDATADIR/Mod/offline-documentation). Translation suffix - Translation suffix + Przyrostek tłumaczenia @@ -98,41 +97,40 @@ custom stylesheet below and can look nicer than the wiki option. The 'Markd Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. - Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. + Uwaga: Jeśli komponenty Web PySide nie zostaną znalezione w systemie, strony pomocy zostaną otwarte w domyślnej przeglądarce internetowej niezależnie od poniższych opcji. The documentation will open in the default web browser - The documentation will open in the default web browser + Dokumentacja zostanie otwarta w domyślnej przeglądarce internetowej In the default web browser - In the default web browser + W domyślnej przeglądarce internetowej The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. - The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. + Dokumentacja zostanie otwarta w nowej karcie wewnątrz interfejsu FreeCAD. Wymaga to komponentu PySide QtWebengineWidgets. Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. Requires the PySide QtWebengineWidgets component. - Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. -Requires the PySide QtWebengineWidgets component. + Dokumentacja otwiera się w oknie dialogowym w obrębie FreeCAD, umożliwiając jednoczesną pracę w widoku 3D. Wymaga komponentu PySide QtWebengineWidgets. Custom stylesheet - Custom stylesheet + Niestandardowy arkusz stylów Specify the path to an alternative CSS file for styling Markdown pages. This only applies if Markdown is selected above. - Specify the path to an alternative CSS file for styling Markdown pages. -This only applies if Markdown is selected above. + Określ ścieżkę do alternatywnego pliku CSS do stylizacji stron Markdown. +Działa to tylko wtedy, gdy Markdown jest wybrany powyżej. diff --git a/src/Mod/Help/Resources/translations/Help_uk.qm b/src/Mod/Help/Resources/translations/Help_uk.qm index 28f93938da..e65b679f7f 100644 Binary files a/src/Mod/Help/Resources/translations/Help_uk.qm and b/src/Mod/Help/Resources/translations/Help_uk.qm differ diff --git a/src/Mod/Help/Resources/translations/Help_uk.ts b/src/Mod/Help/Resources/translations/Help_uk.ts index f1d8bc94e8..2da39a8341 100644 --- a/src/Mod/Help/Resources/translations/Help_uk.ts +++ b/src/Mod/Help/Resources/translations/Help_uk.ts @@ -11,14 +11,14 @@ Source - З файлу + Джерело Fetches the documentation from pages rendered on GitHub. This is currently not available. - Fetches the documentation from pages rendered on GitHub. -This is currently not available. + Отримує документацію зі сторінок, що відображаються на GitHub. +Наразі це недоступно. @@ -27,30 +27,33 @@ You can easily download the documentation for offline use by using the Addon Manager and installing the "offline-documentation" addon. If this field is left blank, FreeCAD will automatically search for the help files at the default location ($USERAPPDATADIR/Mod/offline-documentation). - Установіть для цього спеціальну URL-адресу або папку де розташовані файли довідки. Ви можете з легкістю завантажити документацію для використання в автономному режимі з допомогою Addon -Manager та встановлення "офлайн-документації" додатку. Якщо це поле залишене порожнім, FreeCAD автоматично шукатиме файли довідкиза адресою -розташування за умовчанням. ($USERAPPDATADIR/Mod/offline-documentation). + Вкажіть тут спеціальну URL-адресу або теку, де розташовані файли довідки. +Ви можете легко завантажити документацію для автономного використання за допомогою Менеджера +додатків, встановивши додаток "offline-documentation". Якщо це поле залишити +порожнім, FreeCAD автоматично шукатиме файли довідки в типовому розташуванні +($USERAPPDATADIR/Mod/offline-documentation). Custom location - Налаштування розташування + Спеціальне розташування FreeCAD Wiki (online) - FreeCAD Wiki (в режимі онлайн) + FreeCAD Wiki (онлайн) GitHub (online) - GitHub (в режимі онлайн) + GitHub (онлайн) A translation suffix to use, for example "fr" to get French translation of the documentation. - Суфікс для перекладу, наприклад "fr", щоб отримати французький переклад документації. + Суфікс перекладу для використання, наприклад "fr", +щоб отримати французький переклад документації. @@ -59,22 +62,23 @@ Documentation can be downloaded for offline use via the Addon Manager and instal "offline-documentation" addon. If this field is left blank, FreeCAD will automatically search for the help files at the default location ($USERAPPDATADIR/Mod/offline-documentation). - Set this to a custom URL or the folder where the help files are located. -Documentation can be downloaded for offline use via the Addon Manager and installing the -"offline-documentation" addon. If this field is left blank, FreeCAD will -automatically search for the help files at the default location + Вкажіть тут спеціальну URL-адресу або теку, де розташовані файли довідки. +Документацію можна завантажити для автономного використання через Менеджер додатків, встановивши +додаток "offline-documentation". Якщо це поле залишити порожнім, FreeCAD +автоматично шукатиме файли довідки в типовому розташуванні ($USERAPPDATADIR/Mod/offline-documentation). Translation suffix - Translation suffix + Суфікс перекладу The documentation pages will be fetched from the official FreeCADwiki at https://wiki.freecad.org - Сторінки документації буде взято з офіційного облікового запису FreeCADwiki за адресою https://wiki.freecad.org + Сторінки документації будуть отримані з офіційної +FreeCADwiki за адресою https://wiki.freecad.org @@ -82,13 +86,15 @@ FreeCADwiki at https://wiki.freecad.org of the FreeCAD wiki,hosted on FreeCAD's GitHub account. This can be styled with a custom stylesheet below and can look nicer than the wiki option. The 'Markdown' or 'Pandoc' Python module should be installed for optimal results. - Сторінки документації буде взято з автоматичної конвертації Markdown вікі-сторінки FreeCAD, розміщеної на обліковому записі GitHub FreeCAD. Це можна стилізувати за допомогою -спеціальною таблицею стилів нижче, і вона може виглядати краще, ніж вікі-версія. Слід встановити 'Markdown' або 'Pandoc' Python модуль для досягнення оптимальних результатів. + Сторінки документації будуть отримані з автоматичного перетворення Markdown +вікі FreeCAD, що розміщене в обліковому записі GitHub FreeCAD. Це можна стилізувати за допомогою +спеціальної таблиці стилів нижче, і це може виглядати краще, ніж варіант з вікі. Для отримання +оптимальних результатів слід встановити модуль Python 'Markdown' або 'Pandoc'. Markdown version (online) - Версія Markdown (в режимі онлайн) + Версія Markdown (онлайн) @@ -98,41 +104,41 @@ custom stylesheet below and can look nicer than the wiki option. The 'Markd Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. - Note: if PySide Web components are not found on the system, help pages will open in the default web browser regardless of the options below. + Примітка: якщо компоненти PySide Web не знайдено в системі, сторінки довідки відкриватимуться в типовому веб-браузері незалежно від наведених нижче параметрів. The documentation will open in the default web browser - The documentation will open in the default web browser + Документація відкриватиметься в типовому веб-браузері In the default web browser - In the default web browser + У типовому веб-браузері The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. - The documentation will open in a new tab inside the FreeCAD interface. This requires the PySide QtWebengineWidgets component. + Документація відкриватиметься в новій вкладці всередині інтерфейсу FreeCAD. Для цього потрібен компонент PySide QtWebengineWidgets. Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. Requires the PySide QtWebengineWidgets component. - Documentation opens in a dockable dialog within FreeCAD, allowing simultaneous work in the 3D view. -Requires the PySide QtWebengineWidgets component. + Документація відкривається в закріплюваному діалоговому вікні в FreeCAD, що дозволяє одночасно працювати в 3D-виду. +Вимагає компонента PySide QtWebengineWidgets. Custom stylesheet - Custom stylesheet + Спеціальна таблиця стилів Specify the path to an alternative CSS file for styling Markdown pages. This only applies if Markdown is selected above. - Specify the path to an alternative CSS file for styling Markdown pages. -This only applies if Markdown is selected above. + Вкажіть шлях до альтернативного CSS-файлу для стилізації сторінок Markdown. +Застосовується лише якщо вибрано Markdown вище. @@ -155,12 +161,12 @@ This only applies if Markdown is selected above. Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help - Contents for this page could not be retrieved. Please check settings under menu Edit → Preferences → General → Help + Не вдалося отримати вміст цієї сторінки. Перевірте налаштування в меню Редагувати → Параметри → Загальні → Довідка Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help - Help files location could not be determined. Please check settings under menu Edit → Preferences → General → Help + Не вдалося визначити розташування файлів довідки. Перевірте налаштування в меню Редагувати → Параметри → Загальні → Довідка @@ -170,7 +176,7 @@ This only applies if Markdown is selected above. There is no Markdown renderer installed on your system, so this help page is rendered as is. Please install the Markdown or Pandoc Python modules to improve the rendering of this page. - У вашій системі не встановлено візуалізатор Markdown, тому ця сторінка довідки відображається як є. Будь ласка, встановіть модулі Markdown або Pandoc Python, щоб покращити вигляд цієї сторінки. + У вашій системі не встановлено засіб візуалізації Markdown, тому ця сторінка довідки відображається як є. Будь ласка, встановіть модулі Python Markdown або Pandoc, щоб покращити відображення цієї сторінки. diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm index e2880b3258..19f8afa973 100644 Binary files a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts index 74a4fd5270..95acf072ae 100644 --- a/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_pl.ts @@ -11,12 +11,12 @@ Inspection… - Inspection… + Kontrola… Inspects distance information - Inspects distance information + Sprawdza informacje o odległości @@ -29,12 +29,12 @@ Visual Inspection… - Visual Inspection… + Kontrola wizualna… Inspects the objects visually - Inspects the objects visually + Sprawdza obiekty wizualnie @@ -110,7 +110,7 @@ Leave Info Mode - Leave Info Mode + Opuść tryb informacyjny diff --git a/src/Mod/Material/Gui/Resources/translations/Material_ca.ts b/src/Mod/Material/Gui/Resources/translations/Material_ca.ts index 34b264d509..e39456c515 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_ca.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_ca.ts @@ -6,12 +6,12 @@ Inspect Appearance - Inspect Appearance + Inspeccionar l'aparença Inspects the appearance properties of the selected object - Inspects the appearance properties of the selected object + Inspecciona les propietats d'aparença de l'objecte seleccionat @@ -24,12 +24,12 @@ Inspect Material - Inspect Material + Inspeccionar el material Inspects the material properties of the selected object - Inspects the material properties of the selected object + Inspecciona les propietats del material de l'objecte seleccionat @@ -52,7 +52,7 @@ Context Menu - Context Menu + Menú contextual @@ -72,7 +72,7 @@ Context Menu - Context Menu + Menú contextual @@ -84,7 +84,7 @@ Delete the row? - Delete the row? + Suprimir la fila? @@ -123,22 +123,22 @@ Display Properties - Display Properties + Mostra les propietats Viewing Mode - Viewing Mode + Mode de visualització Document window - Document window + Finestra del document Plot mode - Plot mode + Mode del gràfic @@ -168,12 +168,12 @@ Color plot - Color plot + Color de la traça Custom appearance - Custom appearance + Aparença personalitzada @@ -211,12 +211,12 @@ Document name - Document name + Nom del document Label / internal name - Label / internal name + Etiqueta / nom intern @@ -246,22 +246,22 @@ Diffuse color - Diffuse color + Color difús Ambient color - Ambient color + Color ambient Emissive color - Emissive color + Color emissiu Specular color - Specular color + Color especular @@ -294,12 +294,12 @@ Document name - Document name + Nom del document Label / internal name - Label / internal name + Etiqueta / nom intern @@ -319,7 +319,7 @@ Copy to Clipboard - Copy to Clipboard + Copiar al porta-retalls @@ -334,7 +334,7 @@ Internal name: - Internal name: + Nom intern: @@ -380,37 +380,37 @@ Library directory: - Library directory: + Directori de la biblioteca: Subdirectory: - Subdirectory: + Subdirectori: Sub directory: - Sub directory: + Sub directori: Appearance models: - Appearance models: + Models d'aparença: Physical models: - Physical models: + Models físics: Appearance properties: - Appearance properties: + Propietats d'aparença: Physical properties: - Physical properties: + Propietats físiques: @@ -486,47 +486,47 @@ Card Resources - Card Resources + Recursos de la targeta The cards built-in to FreeCAD will be listed as available - The cards built-in to FreeCAD will be listed as available + Les targetes integrades a FreeCAD apareixeran com a disponibles Use materials added by external workbenches - Use materials added by external workbenches + Utilitzeu materials afegits per bancs de treball externs Cards from FreeCAD’s preferences directory are also listed as available - Cards from FreeCAD’s preferences directory are also listed as available + Les targetes del directori de preferències de FreeCAD també es llistaran com a disponibles Use materials from the Materials preference directory - Use materials from the Materials preference directory + Utilitzar materials del directori de preferències de material Material cards from the specified directory will also be listed as available - Material cards from the specified directory will also be listed as available + Les targetes del directori especificat també es llistaran com a disponibles Use materials from user-defined directory - Use materials from user-defined directory + Utilitzeu materials del directori definit per l'usuari Card Sorting and Duplicates - Card Sorting and Duplicates + Ordenació i duplicació de targetes Duplicate cards will be deleted from the displayed material card list - Duplicate cards will be deleted from the displayed material card list + Les targetes duplicades se suprimiran de la llista de targetes de material mostrada @@ -665,7 +665,7 @@ Si no es marca, s'ordenaran pel seu nom. Library - Library + Biblioteca @@ -675,7 +675,7 @@ Si no es marca, s'ordenaran pel seu nom. Save as inherited - Save as inherited + Desar com a heretat @@ -700,32 +700,32 @@ Si no es marca, s'ordenaran pel seu nom. Save over '%1'? - Save over '%1'? + Voleu desar-ho sobreescrivint "%1"? Confirm Save as New Material - Confirm Save as New Material + Confirma Desar com a material nou This material already exists in this library. Save as a new material? - This material already exists in this library. Save as a new material? + Aquest material ja existeix en aquesta biblioteca. Desar-ho com a material nou? Confirm Save as Copy - Confirm Save as Copy + Confirma Desar com a còpia Save as copy - Save as copy + Desar com a còpia Saving a copy is not recommended as it can break other documents. It is recommended to save as a new material. - Saving a copy is not recommended as it can break other documents. It is recommended to save as a new material. + No es recomana desar com a còpia, ja que pot trencar altres documents. Es recomana que ho desis com a un material nou. @@ -741,12 +741,12 @@ Si no es marca, s'ordenaran pel seu nom. New folder - New folder + Carpeta nova Context Menu - Context Menu + Menú contextual @@ -754,7 +754,7 @@ Si no es marca, s'ordenaran pel seu nom. Launch Editor - Launch Editor + Inicia l'editor @@ -814,17 +814,17 @@ Si no es marca, s'ordenaran pel seu nom. Source reference - Source reference + Bibliografia de les fonts Adds or removes to/from favorites - Adds or removes to/from favorites + Afegeix o suprimeix a/de preferits Toggle Favorite - Toggle Favorite + Alterna preferits @@ -933,17 +933,17 @@ Si no es marca, s'ordenaran pel seu nom. Context Menu - Context Menu + Menú contextual Inherit From - Inherit From + Heretar de Inherit New Material - Inherit New Material + Heretar material nou @@ -983,12 +983,12 @@ Si no es marca, s'ordenaran pel seu nom. Adds or removes to/from favorites - Adds or removes to/from favorites + Afegeix o suprimeix a/de preferits Toggle Favorites - Toggle Favorites + Alterna preferits @@ -1046,7 +1046,7 @@ Si no es marca, s'ordenaran pel seu nom. Material Card - Material Card + Targeta de material @@ -1066,32 +1066,32 @@ Si no es marca, s'ordenaran pel seu nom. Open… - Open… + Obrir… Save As… - Save As… + Anomena i desa… Material Parameter - Material Parameter + Paràmetre del material Add/Remove Parameter - Add/Remove Parameter + Afegir/Suprimir paràmetre Add Property - Add Property + Afegir Propietat Delete Property - Delete Property + Eliminar Propietat @@ -1112,7 +1112,7 @@ Si no es marca, s'ordenaran pel seu nom. Material Workbench - Material Workbench + Banc de treball de Material @@ -1135,7 +1135,7 @@ Si no es marca, s'ordenaran pel seu nom. Delete '%1'? - Delete '%1'? + Esborrar '%1'? @@ -1145,7 +1145,7 @@ Si no es marca, s'ordenaran pel seu nom. Save the material before using it. - Save the material before using it. + Deseu el material abans d'utilitzar-lo. @@ -1155,12 +1155,12 @@ Si no es marca, s'ordenaran pel seu nom. Save changes to the material before closing? - Save changes to the material before closing? + Desar canvis del material abans de tancar? Otherwise, all changes will be lost. - Otherwise, all changes will be lost. + Altrament, es perdran tots els canvis. @@ -1173,7 +1173,7 @@ Si no es marca, s'ordenaran pel seu nom. Delete the row? - Delete the row? + Suprimir la fila? @@ -1181,7 +1181,7 @@ Si no es marca, s'ordenaran pel seu nom. &Appearance - &Appearance + &Aparença @@ -1195,7 +1195,7 @@ Si no es marca, s'ordenaran pel seu nom. &Material - &Material + &Material @@ -1232,12 +1232,12 @@ Si no es marca, s'ordenaran pel seu nom. Select material libraries - Select material libraries + Seleccioneu biblioteques de materials Select model libraries - Select model libraries + Seleccioneu biblioteques de models @@ -1270,7 +1270,7 @@ Si no es marca, s'ordenaran pel seu nom. External interface - External interface + Interfície externa @@ -1280,18 +1280,18 @@ Si no es marca, s'ordenaran pel seu nom. Model cache size - Model cache size + Mida de la memòria cau del model Hit rate - Hit rate + Taxa d'encert Material cache size - Material cache size + Mida de la memòria cau del material @@ -1304,7 +1304,7 @@ Si no es marca, s'ordenaran pel seu nom. Migrating models… - Migrating models… + Migrant models… @@ -1325,23 +1325,23 @@ Si no es marca, s'ordenaran pel seu nom. Validating models… - Validating models… + Validant models… Migrating materials… - Migrating materials… + Migrant materials… Validating materials… - Validating materials… + Validant materials… Unknown exception - aborted - Unknown exception - aborted + Excepció desconeguda - avortat @@ -1368,7 +1368,7 @@ Si no es marca, s'ordenaran pel seu nom. Edits material properties - Edits material properties + Edita les propietats del material @@ -1381,7 +1381,7 @@ Si no es marca, s'ordenaran pel seu nom. Migrates the materials to the external materials manager - Migrates the materials to the external materials manager + Migra els materials al gestor de materials extern @@ -1394,17 +1394,17 @@ Si no es marca, s'ordenaran pel seu nom. Basic appearance - Basic appearance + Aparença bàsica Texture appearance - Texture appearance + Aparença de textura All materials - All materials + Tots els Materials diff --git a/src/Mod/Material/Gui/Resources/translations/Material_de.ts b/src/Mod/Material/Gui/Resources/translations/Material_de.ts index d8535b9e52..1b1eba93d1 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_de.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_de.ts @@ -133,7 +133,7 @@ Document window - Document window + Dokumentfenster @@ -715,17 +715,17 @@ Wenn deaktiviert, werden sie nach ihrem Namen sortiert. Confirm Save as Copy - Confirm Save as Copy + Speichern als Kopie bestätigen Save as copy - Save as copy + Speichern als Kopie Saving a copy is not recommended as it can break other documents. It is recommended to save as a new material. - Saving a copy is not recommended as it can break other documents. It is recommended to save as a new material. + Das Speichern einer Kopie wird nicht empfohlen, da dies andere Dokumente beschädigen kann. Es wird empfohlen, als neues Material zu speichern. diff --git a/src/Mod/Material/Gui/Resources/translations/Material_hu.ts b/src/Mod/Material/Gui/Resources/translations/Material_hu.ts index edb874c771..61b97feb92 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_hu.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_hu.ts @@ -1071,7 +1071,7 @@ Ha le van tiltva, név szerint vannak rendezve. Save As… - Save As… + Mentés másként… diff --git a/src/Mod/Material/Gui/Resources/translations/Material_it.ts b/src/Mod/Material/Gui/Resources/translations/Material_it.ts index 98fc7ee58b..dcff09bbeb 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_it.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_it.ts @@ -1066,7 +1066,7 @@ Se non selezionato, saranno ordinate per il loro nome. Open… - Open… + Apri… diff --git a/src/Mod/Material/Gui/Resources/translations/Material_pl.ts b/src/Mod/Material/Gui/Resources/translations/Material_pl.ts index 279daf6186..ac255267da 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_pl.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_pl.ts @@ -6,12 +6,12 @@ Inspect Appearance - Inspect Appearance + Sprawdź wygląd Inspects the appearance properties of the selected object - Inspects the appearance properties of the selected object + Sprawdza właściwości wyglądu wybranego obiektu @@ -24,12 +24,12 @@ Inspect Material - Inspect Material + Sprawdź materiał Inspects the material properties of the selected object - Inspects the material properties of the selected object + Sprawdza właściwości materiału wybranego obiektu @@ -52,7 +52,7 @@ Context Menu - Context Menu + Menu podręczne @@ -72,7 +72,7 @@ Context Menu - Context Menu + Menu podręczne @@ -84,7 +84,7 @@ Delete the row? - Delete the row? + Usunąć wiersz? @@ -123,22 +123,22 @@ Display Properties - Display Properties + Wyświetl właściwości Viewing Mode - Viewing Mode + Tryb widoku Document window - Document window + Okno dokumentu Plot mode - Plot mode + Tryb kreślenia @@ -168,12 +168,12 @@ Color plot - Color plot + Kolor kreślenia Custom appearance - Custom appearance + Wygląd użytkownika @@ -211,12 +211,12 @@ Document name - Document name + Nazwa dokumentu Label / internal name - Label / internal name + Etykieta / nazwa wewnętrzna @@ -251,17 +251,17 @@ Ambient color - Ambient color + Kolor otoczenia Emissive color - Emissive color + Kolor emisji Specular color - Specular color + Kolor odbicia @@ -294,12 +294,12 @@ Document name - Document name + Nazwa dokumentu Label / internal name - Label / internal name + Etykieta / nazwa wewnętrzna @@ -334,7 +334,7 @@ Internal name: - Internal name: + Nazwa wewnętrzna: @@ -380,37 +380,37 @@ Library directory: - Library directory: + Katalog biblioteki: Subdirectory: - Subdirectory: + Katalog podrzędny: Sub directory: - Sub directory: + Katalog podrzędny: Appearance models: - Appearance models: + Modele wyglądu: Physical models: - Physical models: + Modele fizyczne: Appearance properties: - Appearance properties: + Właściwości wyglądu: Physical properties: - Physical properties: + Właściwości fizyczne: @@ -486,47 +486,48 @@ Card Resources - Card Resources + Zasoby karty The cards built-in to FreeCAD will be listed as available - The cards built-in to FreeCAD will be listed as available + Karty wbudowane w FreeCAD będą wyświetlane jako dostępne Use materials added by external workbenches - Use materials added by external workbenches + Użyj materiałów dodanych przez zewnętrzne środowiska pracy Cards from FreeCAD’s preferences directory are also listed as available - Cards from FreeCAD’s preferences directory are also listed as available + Karty z katalogu preferencji FreeCAD również zostaną wymienione jako dostępne Use materials from the Materials preference directory - Use materials from the Materials preference directory + Użyj materiałów z katalogu preferencji środowiska Materiałów Material cards from the specified directory will also be listed as available - Material cards from the specified directory will also be listed as available + Karty materiałów z podanego katalogu również +zostaną wyświetlone jako dostępne Use materials from user-defined directory - Use materials from user-defined directory + Użyj materiałów z katalogu zdefiniowanego przez użytkownika Card Sorting and Duplicates - Card Sorting and Duplicates + Sortowanie kart i duplikaty Duplicate cards will be deleted from the displayed material card list - Duplicate cards will be deleted from the displayed material card list + Powielone karty zostaną usunięte z wyświetlanej listy kart materiałowych @@ -701,7 +702,7 @@ Nie jest to zalecane. Save over '%1'? - Save over '%1'? + Nadpisać "%1"? diff --git a/src/Mod/Material/Gui/Resources/translations/Material_ru.ts b/src/Mod/Material/Gui/Resources/translations/Material_ru.ts index 94530e3119..75331d0e6b 100644 --- a/src/Mod/Material/Gui/Resources/translations/Material_ru.ts +++ b/src/Mod/Material/Gui/Resources/translations/Material_ru.ts @@ -1275,7 +1275,7 @@ If unchecked, they will be sorted by their name. Cache - Кэш + Временные файлы diff --git a/src/Mod/Measure/Gui/Resources/translations/Measure.ts b/src/Mod/Measure/Gui/Resources/translations/Measure.ts index 5d68353101..ead8b79d9c 100644 --- a/src/Mod/Measure/Gui/Resources/translations/Measure.ts +++ b/src/Mod/Measure/Gui/Resources/translations/Measure.ts @@ -64,7 +64,7 @@ - + Nominal distance: %1 @@ -80,39 +80,95 @@ - Total length: %1 + Area: %1, Diameter: %2 - - Angle: %1, Total length: %2 - - - - - Length: %1 + + Total area: %1, Axis distance: %2 + Total area: %1, Axis distance: %2, Axis angle: %3 + + + + + Total length: %1 + + + + + Angle: %1, Total length: %2 + + + + + Length: %1 + + + + Radius: %1 - + + Diameter: %1 + + + + Distance: %1 - + Minimum distance: %1 + + + Minimum distance: %1, Axis distance: %2 + + + + + Minimum distance: %1, Center distance: %2 + + + + + + Total length: %1, Center distance: %2 + + + + + Total length: %1, Center distance: %2, Axis angle: %3 + + + + + Center surface distance: %1 + + + + + Center axis distance: %1 + + + + + Center axis distance: %1, Axis angle: %2 + + QObject - + Measure diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts index b8b20cdb15..83df889f26 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts @@ -1542,39 +1542,39 @@ to a smoother appearance. Frontal - - - Frontal Quad - - Parallelograms - - Quasi-structured Quad + + Frontal quad - - + + Quasi-structured quad + + + + + Time: - + Running Gmsh… - + Failed to start - + Error @@ -1701,17 +1701,22 @@ to a smoother appearance. - + + Leave empty to use default gmsh executable + + + + Kill - + Time - + Clear diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts index fea87bd66f..9874336919 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_be.ts @@ -1551,39 +1551,39 @@ to a smoother appearance. Frontal Пярэдні - - - Frontal Quad - Пярэдні чатырохкутнік - Parallelograms Паралелаграмы - - Quasi-structured Quad - Квазіструктураваны квадрант + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Час: - + Running Gmsh… Запуск Gmsh… - + Failed to start Не атрымалася запусціць - + Error Памылка @@ -1710,17 +1710,22 @@ to a smoother appearance. Траекторыя - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Забіць - + Time Час - + Clear Ачысціць @@ -2229,7 +2234,7 @@ Visit https://openscad.org/ to install it. Fill holes with maximum number of edges - Fill holes with maximum number of edges + Запаўняе адтуліны з найбольшай колькасцю рэбраў diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index 52f75a7c75..4e07b108af 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -11,12 +11,12 @@ Add Triangle - Add Triangle + Afegir triangle Adds a triangle manually to a mesh - Adds a triangle manually to a mesh + Afegeix manualment un triangle a una malla @@ -29,12 +29,12 @@ Bounding Box Info - Bounding Box Info + Informació de la caixa de delimitació Shows the bounding box coordinates of the selected mesh - Shows the bounding box coordinates of the selected mesh + Mostra les coordenades de la caixa de delimitació de la malla seleccionada @@ -65,12 +65,12 @@ Cross-Sections - Cross-Sections + Seccions transversals Creates cross-sections of the mesh - Creates cross-sections of the mesh + Crea una secció transversal de la malla @@ -83,7 +83,7 @@ Decimate - Decimate + Simplificació @@ -106,7 +106,7 @@ Creates a boolean difference of the selected meshes - Creates a boolean difference of the selected meshes + Crea una diferència booleana de les malles seleccionades @@ -119,12 +119,12 @@ Face Info - Face Info + Informació de la cara Displays information about the selected faces - Displays information about the selected faces + Mostra informació sobre les cares seleccionades @@ -137,7 +137,7 @@ Evaluate Solid - Evaluate Solid + Avaluar sòlid @@ -155,7 +155,7 @@ Evaluate and Repair - Evaluate and Repair + Avaluar i reparar @@ -173,12 +173,12 @@ Export Mesh… - Export Mesh… + Exporta la malla… Exports a mesh to a file - Exports a mesh to a file + Exporta una malla a un fitxer @@ -191,12 +191,12 @@ Close Hole - Close Hole + Tancar forat Closes a hole interactively in the mesh - Closes a hole interactively in the mesh + Tanca interactivament un forat de la malla @@ -209,12 +209,12 @@ Fill Holes - Fill Holes + Emplenar forats Fills holes in the mesh - Fills holes in the mesh + Emplena forats de la malla @@ -227,12 +227,12 @@ Flip Normals - Flip Normals + Inverteix les normals Flips the normals of the selected mesh - Flips the normals of the selected mesh + Inverteix les normals de la malla seleccionada @@ -245,12 +245,12 @@ Mesh From Geometry - Mesh From Geometry + Malla a partir de la geometria Creates a mesh from the selected geometry - Creates a mesh from the selected geometry + Crea una malla a partir de la geometria seleccionada @@ -263,12 +263,12 @@ Mesh From Shape - Mesh From Shape + Malla a partir de forma Tessellates the selected shape to a mesh - Tessellates the selected shape to a mesh + Tessel·la la forma seleccionada a una malla @@ -281,7 +281,7 @@ Harmonize Normals - Harmonize Normals + Harmonitza les normals @@ -299,12 +299,12 @@ Import Mesh… - Import Mesh… + Importa la malla… Imports a mesh from a file - Imports a mesh from a file + Importa una malla d'un fitxer @@ -322,7 +322,7 @@ Creates a boolean intersection from the selected meshes - Creates a boolean intersection from the selected meshes + Crea una intersecció booleana de les malles seleccionades @@ -358,7 +358,7 @@ Cuts the mesh with a selected polygon - Cuts the mesh with a selected polygon + Talla la malla amb un polígon seleccionat @@ -394,7 +394,7 @@ Splits a mesh into 2 meshes - Splits a mesh into 2 meshes + Divideix una malla en 2 malles @@ -412,7 +412,7 @@ Trims a mesh with a selected polygon - Trims a mesh with a selected polygon + Retalla una malla amb un polígon seleccionat @@ -430,12 +430,12 @@ Refinement - Refinement + Refinament Refines an existing mesh - Refines an existing mesh + Refina una malla existent @@ -448,12 +448,12 @@ Remove Components Manually - Remove Components Manually + Elimina components manualment Marks a component to remove it from the mesh - Marks a component to remove it from the mesh + Marca un component per a eliminar-lo de la malla @@ -466,12 +466,12 @@ Remove Components - Remove Components + Eliminar components Removes topologically independent components from the mesh - Removes topologically independent components from the mesh + Suprimeix els components topològics independents de la malla @@ -489,7 +489,7 @@ Scales the selected mesh objects - Scales the selected mesh objects + Escala els objectes malla seleccionats @@ -502,12 +502,12 @@ Section From Plane - Section From Plane + Secció a partir d'un pla Sections the mesh with the selected plane - Sections the mesh with the selected plane + Secciona la malla amb el pla seleccionat @@ -525,7 +525,7 @@ Creates new mesh segments from the mesh - Creates new mesh segments from the mesh + Crea segments de malla nous a partir de la malla @@ -538,12 +538,12 @@ Segmentation From Best-Fit Surfaces - Segmentation From Best-Fit Surfaces + Segmentació a partir de les superfícies que s'ajusten millor Creates new mesh segments from the best-fit surfaces - Creates new mesh segments from the best-fit surfaces + Crea segments de malla a partir de les superfícies que s'ajusten millor @@ -556,12 +556,12 @@ Smooth - Smooth + Suavitza Smoothes the selected meshes - Smoothes the selected meshes + Suavitza les malles seleccionades @@ -574,12 +574,12 @@ Split by Components - Split by Components + Dividir per components Splits the selected mesh into its components - Splits the selected mesh into its components + Divideix la malla seleccionades en els seus components @@ -592,12 +592,12 @@ Trim With Plane - Trim With Plane + Retalla amb el pla Trims a mesh by removing faces on one side of a selected plane - Trims a mesh by removing faces on one side of a selected plane + Retalla una malla eliminant les cares d'un costat del pla seleccionat @@ -615,7 +615,7 @@ Unites the selected meshes - Unites the selected meshes + Uneix les malles seleccionades @@ -628,7 +628,7 @@ Curvature Plot - Curvature Plot + Gràfic de curvatura @@ -646,12 +646,12 @@ Curvature Info - Curvature Info + Informació de la curvatura Displays information about the curvature - Displays information about the curvature + Mostra informació sobre la curvatura @@ -764,7 +764,7 @@ Repair Mesh - Repair Mesh + Reparar malla @@ -868,7 +868,7 @@ Mesh Information - Mesh Information + Informació de malla @@ -878,7 +878,7 @@ Number of edges - Number of edges + Nombre d'arestes @@ -1139,7 +1139,7 @@ Evaluation Settings - Evaluation Settings + Preferències d'avaluació @@ -1231,7 +1231,7 @@ Edge length - Edge length + Longitud de la vora @@ -1240,7 +1240,7 @@ Sampling - Sampling + Mostreig @@ -1442,12 +1442,12 @@ is used when writing a file in AMF format Mesh View - Mesh View + Vista de malla Default Appearance for New Meshes - Default Appearance for New Meshes + Aparença predeterminada per a malles noves @@ -1519,12 +1519,12 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Lambda - Lambda + Lambda Mu - Mu + Mu @@ -1549,39 +1549,39 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suauFrontal Frontal - - - Frontal Quad - Quadrilàter frontal - Parallelograms Paral·lelograms - - Quasi-structured Quad - Quad quasiestructurat + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Temps: - + Running Gmsh… - Running Gmsh… + S'està executant el Gmsh… - + Failed to start No s'ha pogut iniciar - + Error Error @@ -1591,12 +1591,12 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Add Triangle - Add Triangle + Afegir triangle Flip Normal - Flip Normal + Inverteix les normals @@ -1622,7 +1622,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Surface Fit - Surface Fit + Ajustament de la superfície @@ -1685,12 +1685,12 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Max element size (0.0 = Auto) - Max element size (0.0 = Auto) + Mida màxima de l'element (0.0 = Auto) Min element size (0.0 = Auto) - Min element size (0.0 = Auto) + Mida mínima de l'element (0.0 = Auto) @@ -1708,17 +1708,22 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suauCamí - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Finalitza - + Time - Time + Temps - + Clear Neteja @@ -1728,7 +1733,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Remove Components - Remove Components + Eliminar components @@ -1762,17 +1767,17 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Pick Triangle - Pick Triangle + Seleccioneu un triangle Region Options - Region Options + Opcions de regió Respect only triangles with screen-facing normals - Respect only triangles with screen-facing normals + Respecta només els triangles amb les normals mirant cap a la pantalla @@ -1805,7 +1810,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh Segmentation - Mesh Segmentation + Segmentació de malla @@ -1847,22 +1852,22 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Tolerance (flat) - Tolerance (flat) + Tolerància (plana) Tolerance (curved) - Tolerance (curved) + Tolerància (corbada) Maximum curvature - Maximum curvature + Curvatura màxima Minimum curvature - Minimum curvature + Curvatura mínima @@ -1885,7 +1890,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh Segmentation - Mesh Segmentation + Segmentació de malla @@ -1972,7 +1977,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Respect only triangles with screen-facing normals - Respect only triangles with screen-facing normals + Respecta només els triangles amb les normals mirant cap a la pantalla @@ -2042,8 +2047,8 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau OpenSCAD cannot be found on the system. Visit https://openscad.org/ to install it. - OpenSCAD cannot be found on the system. -Visit https://openscad.org/ to install it. + No s'ha trobat l'OpenSCAD al sistema. +Visiteu https://openscad.org/ per a instal·lar-lo. @@ -2187,7 +2192,7 @@ Visit https://openscad.org/ to install it. Export Mesh - Export Mesh + Exportar malla @@ -2222,12 +2227,12 @@ Visit https://openscad.org/ to install it. Fill Holes - Fill Holes + Emplenar forats Fill holes with maximum number of edges - Fill holes with maximum number of edges + Emplenar els forats amb un nombre màxim d'arestes @@ -2247,23 +2252,23 @@ Visit https://openscad.org/ to install it. Display Components - Display Components + Mostra els components Display Segments - Display Segments + Mostra els segments Display Colors - Display Colors + Mostra els colors Leave Info Mode - Leave Info Mode + Surt del mode d'informació @@ -2273,22 +2278,22 @@ Visit https://openscad.org/ to install it. Leave Hole-Filling Mode - Leave Hole-Filling Mode + Surt del mode d'emplenament de forats Leave Removal Mode - Leave Removal Mode + Surt del mode de supressió Delete Selected Faces - Delete Selected Faces + Elimina les cares seleccionades Clear Selected Faces - Clear Selected Faces + Esborra les cares seleccionades @@ -2303,27 +2308,27 @@ Visit https://openscad.org/ to install it. Number of facets - Number of facets + Nombre de facetes Minimum bound - Minimum bound + Límit mínim Maximum bound - Maximum bound + Límit màxim Mesh Info Box - Mesh Info Box + Caixa d'informació de la malla Mesh Info - Mesh Info + Info de la malla @@ -2351,12 +2356,12 @@ Visit https://openscad.org/ to install it. Mesh Tools - Mesh Tools + Eines de malla Mesh Modify - Mesh Modify + Modifica la malla @@ -2366,17 +2371,17 @@ Visit https://openscad.org/ to install it. Mesh Cutting - Mesh Cutting + Tall de la malla Mesh Segmentation - Mesh Segmentation + Segmentació de malla Mesh Analyze - Mesh Analyze + Anàlisis de la malla diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index 53ce75dc14..8432ee9b01 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -1554,39 +1554,39 @@ to a smoother appearance. Frontal Frontal - - - Frontal Quad - Frontal Quad - Parallelograms Parallelograms - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Čas: - + Running Gmsh… Running Gmsh… - + Failed to start Nepodařilo se spustit - + Error Chyba @@ -1713,17 +1713,22 @@ to a smoother appearance. Dráha - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Vynuceně ukončit - + Time Čas - + Clear Vyčistit diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index 01809e906d..d96657347b 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -173,12 +173,12 @@ Export Mesh… - Export Mesh… + Netz exportieren… Exports a mesh to a file - Exports a mesh to a file + Exportiert ein Netz in eine Datei @@ -191,12 +191,12 @@ Close Hole - Close Hole + Loch schließen Closes a hole interactively in the mesh - Closes a hole interactively in the mesh + Schließt ein Loch im Netz interaktiv @@ -299,12 +299,12 @@ Import Mesh… - Import Mesh… + Netz importieren… Imports a mesh from a file - Imports a mesh from a file + Importiert ein Netz aus einer Datei @@ -592,7 +592,7 @@ Trim With Plane - Trim With Plane + An Ebene trimmen @@ -1554,39 +1554,39 @@ Flächenwinkel < SickenWinkel, wird glattes Schattieren angewendetFrontal Frontal - - - Frontal Quad - Frontales Quad - Parallelograms Parallelogramme - - Quasi-structured Quad - Quasi-strukturierter Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Zeit: - + Running Gmsh… Running Gmsh… - + Failed to start Start fehlgeschlagen - + Error Fehler @@ -1713,17 +1713,22 @@ Flächenwinkel < SickenWinkel, wird glattes Schattieren angewendetGmsh-Pfad - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Abbruch (erzwingen) - + Time Zeit - + Clear Leeren @@ -2047,8 +2052,8 @@ Flächenwinkel < SickenWinkel, wird glattes Schattieren angewendet OpenSCAD cannot be found on the system. Visit https://openscad.org/ to install it. - OpenSCAD cannot be found on the system. -Visit https://openscad.org/ to install it. + OpenSCAD kann auf dem System nicht gefunden werden. +Siehe https://openscad.org/, um es zu installieren. @@ -2192,7 +2197,7 @@ Visit https://openscad.org/ to install it. Export Mesh - Export Mesh + Netz exportieren diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts index ebe777cb11..23da71e2e9 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts @@ -1551,39 +1551,39 @@ to a smoother appearance. Frontal Μετωπικό - - - Frontal Quad - Μετωπικό Τετράγωνο - Parallelograms Παραλληλόγραμμα - - Quasi-structured Quad - Dημιουργίας Tετραπλεύρου πλέγματος + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Ώρα: - + Running Gmsh… Running Gmsh… - + Failed to start Αποτυχία εκκίνησης - + Error Σφάλμα @@ -1710,17 +1710,22 @@ to a smoother appearance. Διαδρομή - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Τερματισμός - + Time Time - + Clear Εκκαθάριση diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts index b8c9eb5052..ec0f9db667 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Frontal - - - Frontal Quad - Cuadro frontal - Parallelograms Paralelogramos - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Tiempo: - + Running Gmsh… Running Gmsh… - + Failed to start Fallo al iniciar - + Error Error @@ -1714,17 +1714,22 @@ to a smoother appearance. Trayectoria - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Matar - + Time Tiempo - + Clear Limpiar diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts index 4b6f3deb34..7e8d88f41d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Aurrekoa - - - Frontal Quad - Aurreko karratua - Parallelograms Paralelogramoak - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Denbora: - + Running Gmsh… Running Gmsh… - + Failed to start Hasierak huts egin du - + Error Errorea @@ -1714,17 +1714,22 @@ to a smoother appearance. Bidea - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Hil - + Time Denbora - + Clear Garbitu diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts index 1e7fa3d641..6c9a4e6bde 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Etuosa - - - Frontal Quad - Etuosan nelikkö (quad) - Parallelograms Suunnikkaat - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Aika: - + Running Gmsh… Running Gmsh… - + Failed to start Käynnistäminen epäonnistui - + Error Virhe @@ -1714,17 +1714,22 @@ to a smoother appearance. Rata - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Tuhoa - + Time Time - + Clear Tyhjennä diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index 488b6117c9..c4bd580f47 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -1549,39 +1549,39 @@ Avec l'ombrage plat, les normales de la surface ne sont pas définies par les so Frontal Frontal - - - Frontal Quad - Quadrilatéral frontal - Parallelograms Parallélogrammes - - Quasi-structured Quad - Quadrilatéral quasi-structuré + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Temps : - + Running Gmsh… Lancer Gmsh… - + Failed to start Échec du démarrage - + Error Erreur @@ -1708,17 +1708,22 @@ Avec l'ombrage plat, les normales de la surface ne sont pas définies par les so Chemin d'accès - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Arrêter - + Time Temps - + Clear Supprimer @@ -2227,7 +2232,7 @@ Consulter le site https://openscad.org/ pour l'installer. Fill holes with maximum number of edges - Fill holes with maximum number of edges + Remplir les trous avec un nombre maximum de contours  diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts index fb54aef70e..59bc7514b6 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Čeoni - - - Frontal Quad - Čeoni Četverokut - Parallelograms Paralelogrami - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Vrijeme: - + Running Gmsh… Running Gmsh… - + Failed to start Neuspjelo pokretanje - + Error Pogreška @@ -1714,17 +1714,22 @@ to a smoother appearance. Staza - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Ugasi - + Time Vrijeme - + Clear Brisanje diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts index ae37d128de..884825b316 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts @@ -1554,39 +1554,39 @@ Ha a felület szöge ≥ gyűrődésszögét, a feület árnyékolást használj Frontal Elülső - - - Frontal Quad - Elülső négyoldalú - Parallelograms Parallelogramma - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Idő: - + Running Gmsh… Running Gmsh… - + Failed to start Nem sikerült elindítani - + Error Hiba @@ -1713,17 +1713,22 @@ Ha a felület szöge ≥ gyűrődésszögét, a feület árnyékolást használj Szerszámpálya - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Blokkol - + Time Idő - + Clear Törlés diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts index 0f3c0fc06d..c4d39b4154 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Frontale - - - Frontal Quad - Quad frontale - Parallelograms Parallelogrammi - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Tempo: - + Running Gmsh… Running Gmsh… - + Failed to start Avvio fallito - + Error Errore @@ -1714,17 +1714,22 @@ to a smoother appearance. Percorso - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Termina - + Time Tempo - + Clear Pulisci diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts index d3cff6cbbb..05e5fd52d3 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts @@ -1549,39 +1549,39 @@ to a smoother appearance. Frontal フロンタル法 - - - Frontal Quad - フロンタル・クアッド法 - Parallelograms 平行四辺形 - - Quasi-structured Quad - 準構造化四辺形 + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: 時間： - + Running Gmsh… Running Gmsh… - + Failed to start 開始に失敗しました - + Error エラー @@ -1708,17 +1708,22 @@ to a smoother appearance. パス - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill 作業を中止 - + Time 時刻 - + Clear クリア diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts index 059fee1656..69c031f9db 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts @@ -191,7 +191,7 @@ Close Hole - Close Hole + ხვრელის დახურვა @@ -1554,39 +1554,39 @@ to a smoother appearance. Frontal წინა - - - Frontal Quad - წინა კვადრატი - Parallelograms პარალელოგრამები - - Quasi-structured Quad - კვაზისტრუქტურული კვადრატი + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: დრო: - + Running Gmsh… Gmsh-ის გაშვება… - + Failed to start გაშვების შეცდომა - + Error შეცდომა @@ -1713,17 +1713,22 @@ to a smoother appearance. ტრაექტორია - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill შეწყვეტა - + Time დრო - + Clear გასუფთავება diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts index 157c9f4ce3..f61fe9bf02 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ko.ts @@ -1554,39 +1554,39 @@ to a smoother appearance. Frontal 정면 - - - Frontal Quad - 정면 사각형 - Parallelograms 평행사변형 - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: 시간: - + Running Gmsh… Running Gmsh… - + Failed to start 시작에 실패함 - + Error 오류 @@ -1713,17 +1713,22 @@ to a smoother appearance. 경로 - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill 종료 - + Time Time - + Clear 지우기 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index fce7d3bc41..8b156a23a3 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -1556,39 +1556,39 @@ to a smoother appearance. Frontal Frontaal - - - Frontal Quad - Frontale vierhoek - Parallelograms Parallellogrammen - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Tijd: - + Running Gmsh… Running Gmsh… - + Failed to start Starten mislukt - + Error Fout @@ -1715,17 +1715,22 @@ to a smoother appearance. Pad - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Afbreken - + Time Tijd - + Clear Wissen diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index fa9de32e27..11c2976718 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -11,12 +11,12 @@ Add Triangle - Add Triangle + Dodaj trójkąt Adds a triangle manually to a mesh - Adds a triangle manually to a mesh + Dodaje trójkąt do siatki ręcznie @@ -29,12 +29,12 @@ Bounding Box Info - Bounding Box Info + Informacje o ramce ograniczającej Shows the bounding box coordinates of the selected mesh - Shows the bounding box coordinates of the selected mesh + Pokazuje współrzędne ramki ograniczającej wybranej siatki @@ -65,12 +65,12 @@ Cross-Sections - Cross-Sections + Przekroje poprzeczne Creates cross-sections of the mesh - Creates cross-sections of the mesh + Tworzy przekroje poprzeczne siatki @@ -83,7 +83,7 @@ Decimate - Decimate + Redukuj @@ -106,7 +106,7 @@ Creates a boolean difference of the selected meshes - Creates a boolean difference of the selected meshes + Tworzy różnicę logiczną wybranych siatek @@ -119,12 +119,12 @@ Face Info - Face Info + Informacje o ścianie Displays information about the selected faces - Displays information about the selected faces + Wyświetla informacje o wybranych ścianach @@ -137,7 +137,7 @@ Evaluate Solid - Evaluate Solid + Oceń bryłę @@ -155,7 +155,7 @@ Evaluate and Repair - Evaluate and Repair + Oceń i napraw @@ -173,12 +173,12 @@ Export Mesh… - Export Mesh… + Eksport siatki… Exports a mesh to a file - Exports a mesh to a file + Eksportuje siatkę do pliku @@ -191,12 +191,12 @@ Close Hole - Close Hole + Zamknij otwór Closes a hole interactively in the mesh - Closes a hole interactively in the mesh + Interaktywnie zamyka otwór w siatce @@ -209,12 +209,12 @@ Fill Holes - Fill Holes + Wypełnij otwory Fills holes in the mesh - Fills holes in the mesh + Wypełnia otwory w siatce @@ -227,12 +227,12 @@ Flip Normals - Flip Normals + Odwróć wektory normalne Flips the normals of the selected mesh - Flips the normals of the selected mesh + Odwraca wektory normalne wybranej siatki @@ -245,12 +245,12 @@ Mesh From Geometry - Mesh From Geometry + Siatka z geometrii Creates a mesh from the selected geometry - Creates a mesh from the selected geometry + Tworzy siatkę z wybranej geometrii @@ -263,12 +263,12 @@ Mesh From Shape - Mesh From Shape + Siatka z kształtu Tessellates the selected shape to a mesh - Tessellates the selected shape to a mesh + Dokonuje teselacji wybranego kształtu do siatki @@ -281,7 +281,7 @@ Harmonize Normals - Harmonize Normals + Porządkuj wektory normalne @@ -299,12 +299,12 @@ Import Mesh… - Import Mesh… + Importuj siatkę… Imports a mesh from a file - Imports a mesh from a file + Importuje siatkę z pliku @@ -322,7 +322,7 @@ Creates a boolean intersection from the selected meshes - Creates a boolean intersection from the selected meshes + Tworzy przecięcie logiczne z wybranych siatek @@ -358,7 +358,7 @@ Cuts the mesh with a selected polygon - Cuts the mesh with a selected polygon + Przecina siatkę wybranym wielokątem @@ -394,7 +394,7 @@ Splits a mesh into 2 meshes - Splits a mesh into 2 meshes + Rozdziela siatkę na 2 siatki @@ -412,7 +412,7 @@ Trims a mesh with a selected polygon - Trims a mesh with a selected polygon + Przycina siatkę za pomocą wybranego wielokąta @@ -430,12 +430,12 @@ Refinement - Refinement + Zagęszczenie Refines an existing mesh - Refines an existing mesh + Zagęszcza istniejącą siatkę @@ -448,12 +448,12 @@ Remove Components Manually - Remove Components Manually + Usuń komponenty ręcznie Marks a component to remove it from the mesh - Marks a component to remove it from the mesh + Oznacza komponent do usunięcia z siatki @@ -466,12 +466,12 @@ Remove Components - Remove Components + Usuń komponenty Removes topologically independent components from the mesh - Removes topologically independent components from the mesh + Usuwa topologicznie niezależne komponenty z siatki @@ -489,7 +489,7 @@ Scales the selected mesh objects - Scales the selected mesh objects + Skaluje wybrane obiekty siatki @@ -502,12 +502,12 @@ Section From Plane - Section From Plane + Przekrój z płaszczyzny Sections the mesh with the selected plane - Sections the mesh with the selected plane + Tworzy przekrój siatki z wybraną płaszczyzną @@ -525,7 +525,7 @@ Creates new mesh segments from the mesh - Creates new mesh segments from the mesh + Tworzy nowe segmenty siatki z siatki @@ -538,12 +538,12 @@ Segmentation From Best-Fit Surfaces - Segmentation From Best-Fit Surfaces + Segmentacja z powierzchni najlepszego dopasowania Creates new mesh segments from the best-fit surfaces - Creates new mesh segments from the best-fit surfaces + Tworzy nowe segmenty siatki z powierzchni najlepszego dopasowania @@ -556,12 +556,12 @@ Smooth - Smooth + Wygładź Smoothes the selected meshes - Smoothes the selected meshes + Wygładza wybrane siatki @@ -574,12 +574,12 @@ Split by Components - Split by Components + Rozdziel według komponentów Splits the selected mesh into its components - Splits the selected mesh into its components + Rozdziela wybraną siatkę na jej komponenty @@ -592,12 +592,12 @@ Trim With Plane - Trim With Plane + Przytnij płaszczyzną Trims a mesh by removing faces on one side of a selected plane - Trims a mesh by removing faces on one side of a selected plane + Przycina siatkę usuwając ściany po jednej stronie wybranej płaszczyzny @@ -615,7 +615,7 @@ Unites the selected meshes - Unites the selected meshes + Ujednolica wybrane siatki @@ -628,7 +628,7 @@ Curvature Plot - Curvature Plot + Wykres krzywizny @@ -646,12 +646,12 @@ Curvature Info - Curvature Info + Informacje o krzywiźnie Displays information about the curvature - Displays information about the curvature + Wyświetla informacje o krzywiźnie @@ -764,7 +764,7 @@ Repair Mesh - Repair Mesh + Napraw siatkę @@ -868,7 +868,7 @@ Mesh Information - Mesh Information + Informacje o siatce @@ -878,7 +878,7 @@ Number of edges - Number of edges + Liczba krawędzi @@ -1139,7 +1139,7 @@ Evaluation Settings - Evaluation Settings + Ustawienia ewaluacji @@ -1231,7 +1231,7 @@ Edge length - Edge length + Długość krawędzi @@ -1240,7 +1240,7 @@ Sampling - Sampling + Próbkowanie @@ -1443,12 +1443,12 @@ jest używana przy zapisywaniu pliku w formacie AMF Mesh View - Mesh View + Widok siatki Default Appearance for New Meshes - Default Appearance for New Meshes + Domyślny wygląd dla nowych siatek @@ -1525,12 +1525,12 @@ do gładszego wyglądu. Lambda - Lambda + Lambda Mu - Mu + Mu @@ -1555,39 +1555,39 @@ do gładszego wyglądu. Frontal Frontal - - - Frontal Quad - Przedni czworobok - Parallelograms Równoległoboki - - Quasi-structured Quad - Quasi-ustrukturyzowane czworoboki + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Czas: - + Running Gmsh… - Running Gmsh… + Uruchamianie Gmsh… - + Failed to start Nie udało się uruchomić - + Error Błąd @@ -1602,7 +1602,7 @@ do gładszego wyglądu. Flip Normal - Flip Normal + Odwróć wektory normalne @@ -1628,7 +1628,7 @@ do gładszego wyglądu. Surface Fit - Surface Fit + Dopasowanie powierzchni @@ -1691,12 +1691,12 @@ do gładszego wyglądu. Max element size (0.0 = Auto) - Max element size (0.0 = Auto) + Maksymalny rozmiar elementu (0.0 = Auto) Min element size (0.0 = Auto) - Min element size (0.0 = Auto) + Minimalny rozmiar elementu (0,0 = Auto) @@ -1714,17 +1714,22 @@ do gładszego wyglądu. Ścieżka - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Zatrzymaj - + Time Czas - + Clear Wyczyść @@ -1734,7 +1739,7 @@ do gładszego wyglądu. Remove Components - Remove Components + Usuń komponenty @@ -1768,17 +1773,17 @@ do gładszego wyglądu. Pick Triangle - Pick Triangle + Wybierz trójkąt Region Options - Region Options + Opcje regionu Respect only triangles with screen-facing normals - Respect only triangles with screen-facing normals + Akceptuj tylko trójkąty o kierunkach normalnych zwróconych w stronę ekranu @@ -1811,7 +1816,7 @@ do gładszego wyglądu. Mesh Segmentation - Mesh Segmentation + Segmentacja siatki @@ -1853,22 +1858,22 @@ do gładszego wyglądu. Tolerance (flat) - Tolerance (flat) + Tolerancja (płaszczyzny) Tolerance (curved) - Tolerance (curved) + Tolerancja (krzywizny) Maximum curvature - Maximum curvature + Maksymalna krzywizna Minimum curvature - Minimum curvature + Minimalna krzywizna @@ -1891,7 +1896,7 @@ do gładszego wyglądu. Mesh Segmentation - Mesh Segmentation + Segmentacja siatki @@ -1978,7 +1983,7 @@ do gładszego wyglądu. Respect only triangles with screen-facing normals - Respect only triangles with screen-facing normals + Akceptuj tylko trójkąty o kierunkach normalnych zwróconych w stronę ekranu @@ -2193,7 +2198,7 @@ Odwiedź https://openscad.org żeby go zainstalować. Export Mesh - Export Mesh + Eksportuj siatkę @@ -2228,12 +2233,12 @@ Odwiedź https://openscad.org żeby go zainstalować. Fill Holes - Fill Holes + Wypełnij otwory Fill holes with maximum number of edges - Fill holes with maximum number of edges + Wypełnij otwory maksymalną liczbą krawędzi @@ -2253,23 +2258,23 @@ Odwiedź https://openscad.org żeby go zainstalować. Display Components - Display Components + Wyświetl komponenty Display Segments - Display Segments + Wyświetl segmenty Display Colors - Display Colors + Wyświetl kolory Leave Info Mode - Leave Info Mode + Opuść tryb informacyjny @@ -2279,22 +2284,22 @@ Odwiedź https://openscad.org żeby go zainstalować. Leave Hole-Filling Mode - Leave Hole-Filling Mode + Opuść tryb wypełniania otworów Leave Removal Mode - Leave Removal Mode + Opuść tryb usuwania Delete Selected Faces - Delete Selected Faces + Usuń zaznaczone ściany Clear Selected Faces - Clear Selected Faces + Wyczyść zaznaczone ściany @@ -2309,27 +2314,27 @@ Odwiedź https://openscad.org żeby go zainstalować. Number of facets - Number of facets + Liczba ścianek Minimum bound - Minimum bound + Minimalna wartość graniczna Maximum bound - Maximum bound + Maksymalna wartość graniczna Mesh Info Box - Mesh Info Box + Panel informacji o siatce Mesh Info - Mesh Info + Informacje o siatce @@ -2357,12 +2362,12 @@ Odwiedź https://openscad.org żeby go zainstalować. Mesh Tools - Mesh Tools + Narzędzia siatki Mesh Modify - Mesh Modify + Modyfikacja siatki @@ -2372,17 +2377,17 @@ Odwiedź https://openscad.org żeby go zainstalować. Mesh Cutting - Mesh Cutting + Cięcie siatki Mesh Segmentation - Mesh Segmentation + Segmentacja siatki Mesh Analyze - Mesh Analyze + Analiza siatki diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index 375f1d0e56..16fa17a1f6 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Frontal - - - Frontal Quad - Quadrângulo frontal - Parallelograms Paralelogramos - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Tempo: - + Running Gmsh… Running Gmsh… - + Failed to start Falha ao iniciar - + Error Erro @@ -1714,17 +1714,22 @@ to a smoother appearance. Trajetória - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Abortar - + Time Tempo - + Clear Limpar diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index 851be2fa16..a10545ff3e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -1554,39 +1554,39 @@ to a smoother appearance. Frontal Față - - - Frontal Quad - Quad frontal - Parallelograms Paralelograme - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Timp: - + Running Gmsh… Running Gmsh… - + Failed to start Pornirea a eșuat - + Error Eroare @@ -1713,17 +1713,22 @@ to a smoother appearance. Drum - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Termina - + Time Timp - + Clear Șterge diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index b9fe647817..8c719bd0e0 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -1247,14 +1247,14 @@ Radius 1 - Радиус 1 + Радиус колеса 1 Radius 2 - Радиус 2 + Радиус колеса 2 @@ -1552,39 +1552,39 @@ to a smoother appearance. Frontal Фронтальный - - - Frontal Quad - Передний квадрат - Parallelograms Параллелограммы - - Quasi-structured Quad - Квазиструктурированный четырехугольник + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Время: - + Running Gmsh… Running Gmsh… - + Failed to start Не удалось запустить - + Error Ошибка @@ -1711,17 +1711,22 @@ to a smoother appearance. Траектория - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Завершить принудительно - + Time Время - + Clear Очистить diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts index 4e33b6cbb9..eb6927d017 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Čelno - - - Frontal Quad - Čelni četverokotnik - Parallelograms Paralelogrami - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Čas: - + Running Gmsh… Running Gmsh… - + Failed to start Zagon spodletel - + Error Napaka @@ -1714,17 +1714,22 @@ to a smoother appearance. Pot - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Prekini - + Time Čas - + Clear Počisti diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts index 41dcd4b426..4df0fa9d84 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr-CS.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Prednji - - - Frontal Quad - Prednji četvorougao - Parallelograms Paralelogrami - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Vreme: - + Running Gmsh… Running Gmsh… - + Failed to start Pokretanje nije uspelo - + Error Greška @@ -1714,17 +1714,22 @@ to a smoother appearance. Putanja - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Stopiraj - + Time Time - + Clear Obriši diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts index e853297013..c7bb686c07 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Предњи - - - Frontal Quad - Предњи четвороугао - Parallelograms Паралелограми - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Време: - + Running Gmsh… Running Gmsh… - + Failed to start Покретање није успело - + Error Грешка @@ -1714,17 +1714,22 @@ to a smoother appearance. Путања - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Стопирајте - + Time Time - + Clear Обриши diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index 15f1fe3b54..c0ce2b24cc 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -1555,39 +1555,39 @@ till ett mjukare utseende. Frontal Frontal - - - Frontal Quad - Frontal kvadrant - Parallelograms Parallelogram - - Quasi-structured Quad - Kvasi-strukturerad Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Tid: - + Running Gmsh… Running Gmsh… - + Failed to start Det gick inte att starta - + Error Fel @@ -1714,17 +1714,22 @@ till ett mjukare utseende. Bana - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Döda - + Time Tid - + Clear Rensa diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts index 5726d6f1cd..15f1251983 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts @@ -1554,39 +1554,39 @@ Yüz açısı < kıvrım açısı ise, pürüzsüz gölgeleme kullanılırFrontal Cephe - - - Frontal Quad - Ön Dörtlü - Parallelograms Paralelkenarlar - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Zaman: - + Running Gmsh… Running Gmsh… - + Failed to start Başlatma başarısız - + Error Hata @@ -1713,17 +1713,22 @@ Yüz açısı < kıvrım açısı ise, pürüzsüz gölgeleme kullanılırPath - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Bitir - + Time Zaman - + Clear Temizle diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts index 7885510d8e..68687fde86 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Фронтальний - - - Frontal Quad - Фронтальний квадрат - Parallelograms Паралелограми - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: Час: - + Running Gmsh… Running Gmsh… - + Failed to start Не вдалося почати - + Error Помилка @@ -1714,17 +1714,22 @@ to a smoother appearance. Траєкторія - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Знищити - + Time Час - + Clear Очистити @@ -2228,12 +2233,12 @@ Visit https://openscad.org/ to install it. Fill Holes - Fill Holes + Заповнити отвори Fill holes with maximum number of edges - Fill holes with maximum number of edges + Заповнити отвори максимальною кількістю ребер diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts index ac339e4f3f..1aedbc7e6e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts @@ -1548,39 +1548,39 @@ to a smoother appearance. Frontal 正面 - - - Frontal Quad - 正面四边形 - Parallelograms 平行四边形 - - Quasi-structured Quad - 准结构化四边形网格 + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: 时间： - + Running Gmsh… 运行 Gmsh… - + Failed to start 未能启动 - + Error 错误 @@ -1707,17 +1707,22 @@ to a smoother appearance. 路径 - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill 使终止 - + Time 时间 - + Clear 清除 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 8441a87234..784742e701 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -1555,39 +1555,39 @@ to a smoother appearance. Frontal Frontal - - - Frontal Quad - Frontal Quad - Parallelograms Parallelograms - - Quasi-structured Quad - Quasi-structured Quad + + Frontal quad + Frontal quad - - + + Quasi-structured quad + Quasi-structured quad + + + + Time: 時間: - + Running Gmsh… Running Gmsh… - + Failed to start Failed to start - + Error 錯誤 @@ -1714,17 +1714,22 @@ to a smoother appearance. 路徑 - + + Leave empty to use default gmsh executable + Leave empty to use default gmsh executable + + + Kill Kill - + Time Time - + Clear 清除 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts index b50b09ef34..7c7b44fffe 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts @@ -11,12 +11,12 @@ Cross-Sections - Cross-Sections + Seccions transversals Applies cross-sections to the mesh - Applies cross-sections to the mesh + Aplica seccions transversals a la malla @@ -29,12 +29,12 @@ Curve on Mesh - Curve on Mesh + Corba en malla Creates an approximated curve on top of a mesh object - Creates an approximated curve on top of a mesh object + Crea una corba aproximada sobre un objecte de malla @@ -47,7 +47,7 @@ Mesh From Shape - Mesh From Shape + Malla a partir de forma @@ -65,7 +65,7 @@ Creates a section from a mesh and plane - Creates a section from a mesh and plane + Crea una secció a partir d'una malla i un pla @@ -83,7 +83,7 @@ Trim Mesh - Trim Mesh + Retalla la malla @@ -109,12 +109,12 @@ Cross Sections - Cross Sections + Seccions transversals Guiding Plane - Guiding Plane + Pla guia @@ -134,7 +134,7 @@ Position - Position + Posició @@ -197,12 +197,12 @@ Wrong mesh selected - Wrong mesh selected + S'ha seleccionat una malla incorrecta No point was selected - No point was selected + No s'ha seleccionat cap punt @@ -210,16 +210,16 @@ Curve on Mesh - Curve on Mesh + Corba en malla Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. This command only works with a Mesh object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh workbench. - Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. + Premeu 'Inicia', després trieu punts de la malla. Quan hagueu triat prou punts, cliqueu amb el botó dret i escolliu 'Crea'. Repetiu aquest procés per crear més splines. Tanqueu aquest panell de tasques per completar l'operació. -This command only works with a Mesh object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh workbench. +Aquesta ordre només funciona amb objectes 'malla', no amb cares o superfícies normals. Per convertir un objecte en malla, feu servir les eines del banc de treball Malla. @@ -334,29 +334,28 @@ this feature (e.g. the format OBJ). Meshing Options - Meshing Options + Opcions de mallat Surface deviation - Surface deviation + Desviació de superfície Angular deviation - Angular deviation + Desviació angular The maximal linear deviation of a mesh segment will be the specified surface deviation multiplied by the length of the current mesh segment (edge) - The maximal linear deviation of a mesh segment will be the specified -surface deviation multiplied by the length of the current mesh segment (edge) + La desviació lineal màxima d'un segment de malla serà la desviació de les superfícies especificada multiplicada per la longitud del segment de malla actual (aresta) Maximum edge length - Maximum edge length + Longitud màxima de l'aresta @@ -417,17 +416,17 @@ The smallest value is 0. Mesh size grading - Mesh size grading + Talla de la malla Elements per edge - Elements per edge + Elements per aresta Elements per curvature radius - Elements per curvature radius + Elements per radi de curvatura @@ -492,15 +491,15 @@ A value in the range of 0.2-10. Error: body without a tip selected. Either set the tip of the body or select a different shapee. - Error: body without a tip selected. -Either set the tip of the body or select a different shapee. + Error: s'ha seleccionat un cos sense punta. +Estableix la punta del cos o seleccioni una forma diferent. Error: shape without faces selected. Select a different shape. - Error: shape without faces selected. -Select a different shape. + Error: s'ha seleccionat una forma sense cares. +Seleccioni una forma diferent. @@ -518,7 +517,7 @@ Select a different shape. Select a plane to section the mesh with. - Select a plane to section the mesh with. + Seleccioni un pla amb el qual es farà la secció de malla. @@ -531,17 +530,17 @@ Select a different shape. Select a plane to trim the mesh with. - Select a plane to trim the mesh with. + Seleccioni un pla amb el qual es retallarà la malla. Trim With Plane - Trim With Plane + Retalla amb el pla Select the side to keep - Select the side to keep + Seleccioneu la cara a conservar @@ -572,12 +571,12 @@ Select a different shape. Unwrap Mesh - Unwrap Mesh + Desembolica la malla Finds a flat representation of a mesh - Finds a flat representation of a mesh + Troba una representació plana d'una malla @@ -585,12 +584,12 @@ Select a different shape. Unwrap Face - Unwrap Face + Desembolica la cara Finds a flat representation of a face - Finds a flat representation of a face + Troba una representació plana d'una cara diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts index 51b6ab5e85..f05cf02e4a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts @@ -539,12 +539,12 @@ Select a different shape. Trim With Plane - Trim With Plane + An Ebene trimmen Select the side to keep - Select the side to keep + Die Seite auswählen, die erhalten bleiben soll diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index f63c1ec46f..bbb201efbc 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -11,12 +11,12 @@ Cross-Sections - Cross-Sections + Przekroje poprzeczne Applies cross-sections to the mesh - Applies cross-sections to the mesh + Stosuje przekroje poprzeczne do siatki @@ -29,12 +29,12 @@ Curve on Mesh - Curve on Mesh + Krzywa na siatce Creates an approximated curve on top of a mesh object - Creates an approximated curve on top of a mesh object + Tworzy aproksymowaną krzywą na górze obiektu siatki @@ -47,7 +47,7 @@ Mesh From Shape - Mesh From Shape + Siatka z kształtu @@ -65,7 +65,7 @@ Creates a section from a mesh and plane - Creates a section from a mesh and plane + Utwórz przekrój z siatki i płaszczyzny @@ -83,7 +83,7 @@ Trim Mesh - Trim Mesh + Przytnij siatkę @@ -109,12 +109,12 @@ Cross Sections - Cross Sections + Przekroje poprzeczne Guiding Plane - Guiding Plane + Płaszczyzna prowadząca @@ -197,12 +197,12 @@ Wrong mesh selected - Wrong mesh selected + Wybrano nieodpowiednią siatkę No point was selected - No point was selected + Nie wybrano żadnego punktu @@ -210,16 +210,16 @@ Curve on Mesh - Curve on Mesh + Krzywa na siatce Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. This command only works with a Mesh object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh workbench. - Press 'Start', then pick points on the mesh; when enough points have been set, right-click and choose 'Create'. Repeat this process to create more splines. Close this task panel to complete the operation. + Naciśnij 'Start', a następnie wybierz punkty na siatce; gdy zaznaczona jest wystarczająca liczba punktów, kliknij prawym przyciskiem myszy i wybierz 'Utwórz'. Powtórz ten proces, aby utworzyć więcej krzywych złożonych. Zamknij ten panel zadań, aby zakończyć operację. -This command only works with a Mesh object, not a regular face or surface. To convert an object to a mesh use the tools of the Mesh workbench. +Ta komenda działa tylko z obiektem 'Mesh', a nie zwykłą płaszczyzną lub powierzchnią. Aby przekształcić obiekt na siatkę, użyj narzędzi w środowisku pracy Siatka. @@ -336,29 +336,29 @@ tę funkcję (np. format OBJ). Meshing Options - Meshing Options + Opcje tworzenia siatki Surface deviation - Surface deviation + Odchylenie powierzchni Angular deviation - Angular deviation + Odchylenie kątowe The maximal linear deviation of a mesh segment will be the specified surface deviation multiplied by the length of the current mesh segment (edge) - The maximal linear deviation of a mesh segment will be the specified -surface deviation multiplied by the length of the current mesh segment (edge) + Maksymalne odchylenie liniowe segmentu siatki będzie określone jako +odchylenie powierzchniowe pomnożone przez długość aktualnego segmentu siatki (krawędzi) Maximum edge length - Maximum edge length + Maksymalna długość krawędzi @@ -420,17 +420,17 @@ Najmniejszą wartością jest 0. Mesh size grading - Mesh size grading + Stopniowanie rozmiaru siatki Elements per edge - Elements per edge + Liczba elementów na krawędź Elements per curvature radius - Elements per curvature radius + Liczba elementów na promień krzywizny @@ -497,15 +497,15 @@ Wartość w zakresie 0,2–10. Error: body without a tip selected. Either set the tip of the body or select a different shapee. - Error: body without a tip selected. -Either set the tip of the body or select a different shapee. + Błąd: zawartość bez wskazanego czubka. +Wstaw czubek zawartości lub wybierz inny kształt. Error: shape without faces selected. Select a different shape. - Error: shape without faces selected. -Select a different shape. + Błąd: wybrano kształt bez ścian. +Wybierz inny kształt. @@ -523,7 +523,7 @@ Select a different shape. Select a plane to section the mesh with. - Select a plane to section the mesh with. + Wybierz płaszczyznę do utworzenia przekroju siatki. @@ -536,7 +536,7 @@ Select a different shape. Select a plane to trim the mesh with. - Select a plane to trim the mesh with. + Wybierz płaszczyznę do przycinania siatki. @@ -546,7 +546,7 @@ Select a different shape. Select the side to keep - Select the side to keep + Wybierz stronę do zachowania @@ -577,12 +577,12 @@ Select a different shape. Unwrap Mesh - Unwrap Mesh + Rozwiń siatkę Finds a flat representation of a mesh - Finds a flat representation of a mesh + Znajduje płaską reprezentację siatki @@ -590,12 +590,12 @@ Select a different shape. Unwrap Face - Unwrap Face + Rozwiń ścianę Finds a flat representation of a face - Finds a flat representation of a face + Znajduje płaską reprezentację ściany diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm index 8115294bf7..65cf0253ab 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts index ecfd2512d3..b57874eb48 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts @@ -6,7 +6,7 @@ General OpenSCAD Settings - Configuració General de OpenSCAD + Configuració General d'OpenSCAD @@ -108,22 +108,22 @@ OpenSCAD Import - OpenSCAD Import + Importar OpenSCAD Use ViewProviders in Tree View - Use ViewProviders in Tree View + Utilitzar ViewProviders a la Vista d'Arbre Send to OpenSCAD via - Send to OpenSCAD via + Enviar a OpenSCAD via OpenSCAD Export - OpenSCAD Export + Exportació d'OpenSCAD @@ -227,32 +227,32 @@ Converts edges to faces - Converts edges to faces + Convertir les vores en cares Select 3 objects first - Select 3 objects first + Seleccioneu 3 objectes primer Clear Code - Clear Code + Netejar codi Open… - Open… + Obrir… Save… - Save… + Desar… as mesh - as mesh + com a malla @@ -320,7 +320,7 @@ Explodes a fusion or compound and applies random colors - Explodes a fusion or compound and applies random colors + Descompon una fusió o un compost i aplica colors aleatoris @@ -333,7 +333,7 @@ Colors shapes by validity and type - Colors shapes by validity and type + Acolorir les formes per validesa i tipus @@ -346,7 +346,7 @@ Creates a refined shape - Creates a refined shape + Crea una forma refinada @@ -359,7 +359,7 @@ Creates a feature to increase the tolerance - Creates a feature to increase the tolerance + Crea una característica per a incrementar la tolerància @@ -372,7 +372,7 @@ Expands all placements downwards in the Tree View - Expands all placements downwards in the Tree View + Expandeix totes les col·locacions cap avall a la vista en arbre @@ -385,7 +385,7 @@ Replaces an object in the Tree View - Replaces an object in the Tree View + Substitueix un objecte a la vista en arbre @@ -393,12 +393,12 @@ Remove Objects and Children - Remove Objects and Children + Eliminar objectes i els seus fills Removes the selected objects and all children that are not referenced by other objects - Removes the selected objects and all children that are not referenced by other objects + Elimina els objectes seleccionats i tots els fills que no són referenciats per a altres objectes @@ -411,7 +411,7 @@ Creates a hull - Creates a hull + Crea una closca @@ -432,7 +432,7 @@ Convert Edges to Faces - Convert Edges to Faces + Converteix les vores en cares @@ -445,7 +445,7 @@ Mirrors the mesh - Mirrors the mesh + Reflecteix la malla @@ -453,12 +453,12 @@ Scale Mesh Feature - Scale Mesh Feature + Escalat de la malla Scales the mesh - Scales the mesh + Escala la malla @@ -466,12 +466,12 @@ Resize Mesh Feature - Resize Mesh Feature + Redimensionat de la malla Resizes the mesh - Resizes the mesh + Redimensiona la malla @@ -484,7 +484,7 @@ Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary - Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary + Afegeix un element OpenSCAD basat en el codi d'OpenSCAD entrat, utilitzant el binari d'OpenSCAD @@ -497,7 +497,7 @@ Performs a boolean operation using the OpenSCAD binary - Performs a boolean operation using the OpenSCAD binary + Realitza una operació binària utilitzant el binari d'OpenSCAD @@ -505,12 +505,12 @@ Minkowski Sum - Minkowski Sum + Suma Minkowski Creates a Minkowski sum - Creates a Minkowski sum + Crea una suma Minkowski diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm index d5ec0e803e..99b2faa01f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts index 8249377fa7..04ea73877f 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts @@ -320,7 +320,7 @@ Explodes a fusion or compound and applies random colors - Explodes a fusion or compound and applies random colors + Sprengt eine Vereinigung oder ein Verbundobjekt und wendet zufällige Farben an @@ -484,7 +484,7 @@ Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary - Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary + Fügt ein OpenSCAD-Element hinzu, das auf eingegebenen OpenSCAD-Code basiert, der die OpenSCAD-Binärdatei verwendet @@ -497,7 +497,7 @@ Performs a boolean operation using the OpenSCAD binary - Performs a boolean operation using the OpenSCAD binary + Führt eine boolesche Verknüpfung unter Verwendung der OpenSCAD-Binärdatei aus diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm index fba7140689..0ef0643d72 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts index c343cef7e0..3dad35a95d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts @@ -227,12 +227,12 @@ Converts edges to faces - Converts edges to faces + Converte i bordi in facce Select 3 objects first - Select 3 objects first + Seleziona prima 3 oggetti @@ -242,17 +242,17 @@ Open… - Open… + Apri… Save… - Save… + Salva… as mesh - as mesh + come mesh diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm index c462f95ca7..a573f383f4 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index c5755edb32..95df8d08d3 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -109,7 +109,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa OpenSCAD Import - OpenSCAD Import + Import z OpenSCAD @@ -119,12 +119,12 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Send to OpenSCAD via - Send to OpenSCAD via + Wyślij do OpenSCAD przez OpenSCAD Export - OpenSCAD Export + Eksport do OpenSCAD @@ -228,32 +228,32 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Converts edges to faces - Converts edges to faces + Przekształca krawędzie na ściany Select 3 objects first - Select 3 objects first + Najpierw wybierz 3 obiekty Clear Code - Clear Code + Czyść kod Open… - Open… + Otwórz… Save… - Save… + Zapisz… as mesh - as mesh + jako siatka @@ -335,7 +335,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Colors shapes by validity and type - Colors shapes by validity and type + Koloruje kształty według prawidłowości i typu @@ -348,7 +348,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Creates a refined shape - Creates a refined shape + Tworzy udoskonalony kształt @@ -387,7 +387,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Replaces an object in the Tree View - Replaces an object in the Tree View + Zastępuje obiekt w widoku drzewa @@ -395,12 +395,12 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Remove Objects and Children - Remove Objects and Children + Usuń obiekty i podrzędne Removes the selected objects and all children that are not referenced by other objects - Removes the selected objects and all children that are not referenced by other objects + Usuwa wybrane obiekty wraz ze wszystkimi obiektami podrzędnymi, do których nie odnoszą się inne obiekty @@ -413,7 +413,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Creates a hull - Creates a hull + Tworzy kadłub @@ -434,7 +434,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Convert Edges to Faces - Convert Edges to Faces + Przekształć krawędzie na ściany @@ -447,7 +447,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Mirrors the mesh - Mirrors the mesh + Odbija siatkę @@ -455,12 +455,12 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Scale Mesh Feature - Scale Mesh Feature + Funkcja skalowania siatki Scales the mesh - Scales the mesh + Skaluje siatkę @@ -468,12 +468,12 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Resize Mesh Feature - Resize Mesh Feature + Funkcja zmiany rozmiaru siatki Resizes the mesh - Resizes the mesh + Zmienia rozmiar siatki @@ -486,7 +486,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary - Adds an OpenSCAD element based on entered OpenSCAD code using the OpenSCAD binary + Dodaje element OpenSCAD na podstawie wprowadzonego kodu OpenSCAD za pomocą pliku binarnego OpenSCAD @@ -499,7 +499,7 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Performs a boolean operation using the OpenSCAD binary - Performs a boolean operation using the OpenSCAD binary + Wykonuje operację logiczną przy użyciu pliku binarnego OpenSCAD @@ -507,12 +507,12 @@ funkcje będą wymagać swoich elementów podrzędnych w widoku drzewa Minkowski Sum - Minkowski Sum + Suma Minkowskiego Creates a Minkowski sum - Creates a Minkowski sum + Tworzy sumę Minkowskiego diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 30d0703b57..5e8c496325 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -2218,7 +2218,7 @@ of the projection. - + Edit attachment @@ -4065,22 +4065,37 @@ Check one or more edge entities first. - + + Show final result by default when editing features + + + + + Show transparent preview overlay by default when editing features + + + + + Highlight the profile used to create features + + + + Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features - + Disable recompute while dragging @@ -4094,19 +4109,8 @@ Check one or more edge entities first. Preview - - - Show final result by default when editing feature - - - - - Show transparent preview overlay by default when editing feature - - - Allow multiple solids in Part Design bodies by default @@ -4819,11 +4823,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System - - - In x-direction - - @@ -4832,14 +4831,19 @@ only created cuts will be visible of the object being attached + + + In X-direction + + - In y-direction + In Y-direction - In z-direction + In Z-direction @@ -4886,82 +4890,82 @@ of the object being attached. - + OCC error: %1 - + unknown error - + Attachment mode failed: %1 - + Not attached - + Attached with mode %1 - + Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): - + Selecting… - + Face - + Edge - + Vertex - + Reference%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: - + %1 (add %2) - + %1 (add more references) @@ -5255,12 +5259,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment - + Datum dialog: input error @@ -5483,23 +5487,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness - + Select faces of the source object and press 'Done' - + Done - + Input error @@ -5594,8 +5598,8 @@ Continue? - - + + No reference selected @@ -7085,7 +7089,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_be.ts b/src/Mod/Part/Gui/Resources/translations/Part_be.ts index 3cfbcd81a9..a5f8729384 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_be.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_be.ts @@ -878,37 +878,40 @@ Align XY-plane to osculating circle of an edge. Optional vertex link defines where. Attachment3D mode tooltip - Align XY-plane to osculating circle of an edge. Optional vertex link defines where. + Выраўнаваць плоскасць XY да датыкальнай акружнасці рабра. +Неабавязковая сувязь на вяршыню вызначае, дзе кропка дотыку. XY-plane by 3 points Attachment3D mode caption - XY-plane by 3 points + Плоскасць XY па трох кропках Align XY-plane to pass through three vertices. Attachment3D mode tooltip - Align XY-plane to pass through three vertices. + Выраўноўваць плоскасць XY так, каб яна праходзіла праз тры вяршыні. XZ-plane by 3 points Attachment3D mode caption - XZ-plane by 3 points + Плоскасць XZ па трох кропках Align XZ-plane to pass through 3 points; X axis will pass through two first points. Attachment3D mode tooltip - Align XZ-plane to pass through 3 points; X axis will pass through two first points. + Выраўнаваць плоскасць XZ так, каб яна праходзіла праз тры кропкі; вось X пройдзе праз дзве першыя кропкі. Specialty mode for folding polyhedra. Select 4 edges in order: foldable edge, fold line, other fold line, other foldable edge. XY-plane will be aligned to folding the first edge. Attachment3D mode tooltip - Specialty mode for folding polyhedra. Select 4 edges in order: foldable edge, fold line, other fold line, other foldable edge. XY-plane will be aligned to folding the first edge. + Спецыяльны рэжым для складання шматкантовікаў. +Абярыце чатыры рабра па парадку: рабро складання, лінія згіну, іншая лінія згіну, іншае рабро складання. +Плоскасць XY будзе выраўнаваная па складанню першага рабра. @@ -1792,7 +1795,7 @@ Picks a curve network - Picks a curve network + Выбірае сеткі крывых @@ -1805,12 +1808,12 @@ Points From Shape - Points From Shape + Кропкі з фігуры Creates distributed points from the selected shape - Creates distributed points from the selected shape + Стварае размеркаваныя кропкі на абранай фігуры @@ -1828,7 +1831,7 @@ Creates solid geometric primitives parametrically - Creates solid geometric primitives parametrically + Стварае суцэльныя геаметрычныя першасныя целы параметрычнымі @@ -1841,7 +1844,7 @@ Project on Surface - Project on Surface + Праект на паверхні @@ -1849,10 +1852,8 @@ onto a face of another shape. The camera view determines the direction of the projection. - Projects edges, wires, or faces of one shape -onto a face of another shape. -The camera view determines the direction -of the projection. + Праекцыя рэбраў, ломаных ліній ці граняў адной фігуры на грань іншай фігуры. +Выгляд камеры вызначае напрамак праецыравання. @@ -1865,12 +1866,12 @@ of the projection. Refine Shape - Refine Shape + Удасканаліць фігуру Creates a refined copy of the selected shapes - Creates a refined copy of the selected shapes + Стварае ўдасканаленую копію абраных фігур @@ -1883,12 +1884,12 @@ of the projection. Reverse Shapes - Reverse Shapes + Перавярнуць фігуры Reverses the orientation of the selected shapes - Reverses the orientation of the selected shapes + Змяняе арыентацыю абраных фігур на супрацьлеглы @@ -1906,7 +1907,7 @@ of the projection. Revolves the selected shape - Revolves the selected shape + Вярчэнне абранай фігуры @@ -1919,12 +1920,12 @@ of the projection. Ruled Surface - Ruled Surface + Лінейная паверхня Creates a ruled surface between 2 selected wires - Creates a ruled surface between 2 selected wires + Стварае лінейную паверхню паміж дзвюма абранымі ломанымі лініямі @@ -1942,7 +1943,7 @@ of the projection. Sections 2 selected shapes - Sections 2 selected shapes + Перасякае дзве абраныя фігуры @@ -1955,12 +1956,12 @@ of the projection. Shape From Mesh - Shape From Mesh + Фігура з паліганальнай сеткі Creates a shape from the selected mesh - Creates a shape from the selected mesh + Стварае фігуру з абранай паліганальнай сеткі @@ -1978,7 +1979,7 @@ of the projection. Creates a simple non-parametric copy of the selected shapes - Creates a simple non-parametric copy of the selected shapes + Стварае простую непараметрычную копію абранай фігуры @@ -2016,7 +2017,7 @@ of the projection. Creates a solid sphere - Creates a solid sphere + Стварае суцэльную сферу @@ -2034,7 +2035,7 @@ of the projection. Sweeps profiles along a wire - Sweeps profiles along a wire + Перамяшчае профілі наўздоўж ломанай лініі @@ -2052,7 +2053,7 @@ of the projection. Removes the selected faces and offsets the remaining shape outward to add thickness - Removes the selected faces and offsets the remaining shape outward to add thickness + Выдаляе абраныя грані і рухае астатнюю фігуру вонкі, каб дадаць таўшчыню @@ -2082,7 +2083,7 @@ of the projection. Creates a solid torus - Creates a solid torus + Стварае суцэльны тор @@ -2095,12 +2096,12 @@ of the projection. Transformed Copy - Transformed Copy + Пераўтварэнне цела Creates a non-parametric copy with transformed placement of the selected shapes - Creates a non-parametric copy with transformed placement of the selected shapes + Стварае непараметрычную копію з пераўтвораным размяшчэннем абраных фігур @@ -2144,7 +2145,7 @@ of the projection. Import Curve Net - Import Curve Net + Імпартаваць сетку крывых @@ -2179,27 +2180,27 @@ of the projection. Add coordinate system - Add coordinate system + Дадаць сістэму каардынат Add datum plane - Add datum plane + Дадаць апорную плоскасць Add datum line - Add datum line + Дадаць апорную лінію Add datum point - Add datum point + Дадаць апорную кропку Create Cylinder - Create Cylinder + Стварыць цыліндр @@ -2222,7 +2223,7 @@ of the projection. Пераўтварыць паліганальную сетку - + Edit attachment Змяніць мацаванне @@ -2275,7 +2276,7 @@ of the projection. Edit mirror - Edit mirror + Змяніць сіметрычна @@ -2308,48 +2309,48 @@ of the projection. Attachment mode - Attachment mode + Рэжым мацавання Attachment Offset in its Local Coordinate System - Attachment Offset in its Local Coordinate System + Зрушэнне прымацавання ў лакальнай сістэме каардынат Around X-axis - Around X-axis + Вакол восі X Rotation around the X-axis Note: The placement is expressed in local space of object being attached. - Rotation around the X-axis -Note: The placement is expressed in local space of object being attached. + Вярчэнне вакол восі X +Заўвага: размяшчэнне выяўляецца ў лакальнай прасторы прымацаванага аб'екту. Around Y-axis - Around Y-axis + Вакол восі Y Rotation around the Y-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Y-axis -Note: The placement is expressed in local space of object being attached. + Вярчэнне вакол восі Y +Заўвага: размяшчэнне выяўляецца ў лакальнай прасторы прымацаванага аб'екту. Around Z-axis - Around Z-axis + Вакол восі Z Rotation around the Z-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Z-axis -Note: The placement is expressed in local space of object being attached. + Вярчэнне вакол восі Z +Заўвага: размяшчэнне выяўляецца ў лакальнай прасторы прымацаванага аб'екту. @@ -2361,17 +2362,17 @@ Note: The placement is expressed in local space of object being attached. In X-direction - In X-direction + Па напрамку восі X In Y-direction - In Y-direction + Па напрамку восі Y In Z-direction - In Z-direction + Па напрамку восі Z @@ -2434,7 +2435,7 @@ Note: The placement is expressed in local space of object being attached. Cannot compute cross-sections - Cannot compute cross-sections + Не атрымалася вылічыць папярочныя перасекі @@ -2502,7 +2503,7 @@ Note: The placement is expressed in local space of object being attached. Swap Selection - Swap Selection + Інвертаваць выбар @@ -2517,7 +2518,7 @@ Note: The placement is expressed in local space of object being attached. First, select a shape on the left side - First, select a shape on the left side + Спачатку абярыце фігуру з левага боку @@ -3556,23 +3557,23 @@ Check one or more edge entities first. U parameter - U parameter + Налада U V parameters - V parameters + Налады V Radius 3 - Radius 3 + Радыус 3 V parameter - V parameter + Налада V @@ -3584,32 +3585,32 @@ Check one or more edge entities first. Circumradius - Circumradius + Радыус акружнасці X min/max - X min/max + X мін/макс Y min/max - Y min/max + Y мін/макс Z min/max - Z min/max + Z мін/макс X2 min/max - X2 min/max + X2 мін/макс Z2 min/max - Z2 min/max + Z2 мін/макс @@ -3619,7 +3620,7 @@ Check one or more edge entities first. Coordinate system - Coordinate system + Сістэма каардынат @@ -3629,34 +3630,34 @@ Check one or more edge entities first. Number of rotations - Number of rotations + Колькасць абаротаў Angle 1 - Angle 1 + Вугал 1 Angle 2 - Angle 2 + Вугал 2 From 3 Points - From 3 Points + З трох кропак Major radius - Major radius + Вялікая паўвось Minor radius - Minor radius + Малая паўвось @@ -3751,7 +3752,7 @@ Check one or more edge entities first. Project on Surface - Project on Surface + Праект на паверхні @@ -3885,7 +3886,7 @@ Check one or more edge entities first. Select Reference - Select Reference + Абраць апорны элемент @@ -3895,7 +3896,7 @@ Check one or more edge entities first. Extends the revolution forwards and backwards by half the angle - Extends the revolution forwards and backwards by half the angle + Выцягвае хуткасць кручэння наперад і назад на палову вугла @@ -4090,22 +4091,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Эксперыментальная - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4119,19 +4135,8 @@ Check one or more edge entities first. Preview Папярэдні выгляд - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4141,7 +4146,7 @@ Check one or more edge entities first. Shape Appearance - Shape Appearance + Знешні выгляд фігуры @@ -4351,17 +4356,17 @@ will be used or black. X-component of direction vector - X-component of direction vector + Кампанента X вектара напрамку Y-component of direction vector - Y-component of direction vector + Кампанента Y вектара напрамку Z-component of direction vector - Z-component of direction vector + Кампанента Z вектара напрамку @@ -4843,17 +4848,12 @@ only created cuts will be visible Attachment mode - Attachment mode + Рэжым мацавання Attachment Offset in its Local Coordinate System - Attachment Offset in its Local Coordinate System - - - - In x-direction - In x-direction + Зрушэнне прымацавання ў лакальнай сістэме каардынат @@ -4864,20 +4864,25 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + Па напрамку восі X + - In y-direction - In y-direction + In Y-direction + Па напрамку восі Y - In z-direction - In z-direction + In Z-direction + Па напрамку восі Z Around X-axis - Around X-axis + Вакол восі X @@ -4889,7 +4894,7 @@ of the object being attached. Around Y-axis - Around Y-axis + Вакол восі Y @@ -4901,7 +4906,7 @@ of the object being attached. Around Z-axis - Around Z-axis + Вакол восі Z @@ -4921,82 +4926,82 @@ of the object being attached. Павярнуць бакі - + OCC error: %1 Памылка OpenCASCADE: %1 - + unknown error невядомая памылка - + Attachment mode failed: %1 Памылка рэжыму прымацавання: %1 - + Not attached Не прымацаваны - + Attached with mode %1 Прымацаваны ў рэжыме %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Грань - + Edge Рабро - + Vertex Вяршыня - + Reference%1 Апора%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Недаступны для змены, паколькі вярчэнне Зрушэння прымацавання абмежавана выразамі. - + Reference combinations: Камбінацыі арыенціраў: - + %1 (add %2) %1 (дадаць %2) - + %1 (add more references) %1 (дадаць болей арыенціраў) @@ -5300,12 +5305,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Прымацаваць - + Datum dialog: input error Datum dialog: input error @@ -5359,7 +5364,7 @@ Individual boolean operation checks: Recto verso - Recto verso + Абодва бакі @@ -5529,23 +5534,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Таўшчыня - + Select faces of the source object and press 'Done' Абярыце грані зыходнага аб'екта і націсніце 'Гатова' - + Done Гатова - + Input error Памылка ўводу @@ -5641,8 +5646,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Без абраных спасылак @@ -5944,12 +5949,12 @@ Continue? Edit Fillet - Edit Fillet + Змяніць акругленне Edit Chamfer - Edit Chamfer + Змяніць фаску @@ -6027,7 +6032,7 @@ Continue? Boolean Tools - Boolean Tools + Лагічныя інструменты @@ -6957,7 +6962,7 @@ Overlapping volumes of the shapes will be removed. Shape From Mesh - Shape From Mesh + Фігура з паліганальнай сеткі @@ -7140,7 +7145,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 2cf067f4a0..3eec160be7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -1478,7 +1478,7 @@ Cross-Sections - Cross-Sections + Seccions transversals @@ -2221,7 +2221,7 @@ of the projection. Convertir malla - + Edit attachment Editar adjunt @@ -2383,12 +2383,12 @@ Note: The placement is expressed in local space of object being attached. Cross Sections - Cross Sections + Seccions transversals Guiding Plane - Guiding Plane + Pla guia @@ -4084,22 +4084,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4113,19 +4128,8 @@ Check one or more edge entities first. Preview Previsualització - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4846,11 +4850,6 @@ només seran visibles els talls creats Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4860,15 +4859,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4917,82 +4921,82 @@ of the object being attached. Dos cares - + OCC error: %1 OCC error: %1 - + unknown error error desconegut - + Attachment mode failed: %1 Mode d'afecció ha fallat: %1 - + Not attached No adjuntes - + Attached with mode %1 S'adjunta amb mode de %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Cara - + Edge Vora - + Vertex Vèrtex - + Reference%1 Reference%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. No es pot editar perquè la rotació Equidistància adjunt està restringida per les expressions. - + Reference combinations: Combinacions de referència: - + %1 (add %2) %1 (afegir %2) - + %1 (add more references) %1 (afegir més referències) @@ -5288,12 +5292,12 @@ Comprovacions d'operació booleana individual: PartGui::TaskDlgAttacher - + Attachment Adjunt - + Datum dialog: input error Datum dialog: input error @@ -5517,23 +5521,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Gruix - + Select faces of the source object and press 'Done' Seleccionar cares del objecta d'origen y pulsar 'Fet' - + Done Fet - + Input error Error d'entrada @@ -5629,8 +5633,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Cap referència seleccionat @@ -6627,7 +6631,7 @@ Overlapping volumes of the shapes will be removed. Custom appearance - Custom appearance + Aparença personalitzada @@ -7126,7 +7130,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index b3cd77bf26..ad26eee351 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -2221,7 +2221,7 @@ of the projection. Převést síť - + Edit attachment Upravit připojení @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimentální - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Náhled - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ budou viditelné pouze vytvořené řezy Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Otočit strany - + OCC error: %1 OCC chyba: %1 - + unknown error neznámá chyba - + Attachment mode failed: %1 Režim připojení selhal: %1 - + Not attached Není připojeno - + Attached with mode %1 Připojené v módu %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Plocha - + Edge Hrana - + Vertex Vrchol - + Reference%1 Reference%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Není upravitelné, protože otočení odsazeného připojení je vázáno výrazy. - + Reference combinations: Kombinace referencí: - + %1 (add %2) %1 (přidat %2) - + %1 (add more references) %1 (přidat více referencí) @@ -5302,12 +5306,12 @@ Jednotlivé kontroly booleovských operací: PartGui::TaskDlgAttacher - + Attachment Připojení - + Datum dialog: input error Datum dialog: input error @@ -5531,23 +5535,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Tloušťka - + Select faces of the source object and press 'Done' Vyberte stěny zdrojového objektu a stiskněte tlačítko "Hotovo" - + Done Hotovo - + Input error Chyba zadání @@ -5643,8 +5647,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Není vybrána reference @@ -7140,7 +7144,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 93cc077777..93070da15c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -1181,7 +1181,7 @@ Box Selection - Box Selection + Rechteckauswahl @@ -1575,7 +1575,7 @@ Exports to a CAD file - In CAD-Datei exportieren + Exportiert in eine CAD-Datei @@ -2221,7 +2221,7 @@ of the projection. Netz umwandeln - + Edit attachment Befestigung bearbeiten @@ -2323,8 +2323,8 @@ of the projection. Rotation around the X-axis Note: The placement is expressed in local space of object being attached. - Rotation around the X-axis -Note: The placement is expressed in local space of object being attached. + Drehung um die X-Achse +Hinweis: Die Positionierung wird im lokalen Raum des befestigten Objekts dargestellt. @@ -2335,8 +2335,8 @@ Note: The placement is expressed in local space of object being attached. Rotation around the Y-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Y-axis -Note: The placement is expressed in local space of object being attached. + Drehung um die Y-Achse +Hinweis: Die Positionierung wird im lokalen Raum des befestigten Objekts dargestellt. @@ -2347,8 +2347,8 @@ Note: The placement is expressed in local space of object being attached. Rotation around the Z-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Z-axis -Note: The placement is expressed in local space of object being attached. + Drehung um die Z-Achse +Hinweis: Die Positionierung wird im lokalen Raum des befestigten Objekts dargestellt. @@ -2360,17 +2360,17 @@ Note: The placement is expressed in local space of object being attached. In X-direction - In X-direction + In X-Richtung In Y-direction - In Y-direction + In Y-Richtung In Z-direction - In Z-direction + In Z-Richtung @@ -2433,7 +2433,7 @@ Note: The placement is expressed in local space of object being attached. Cannot compute cross-sections - Cannot compute cross-sections + Querschnitte können nicht berechnet werden @@ -3869,17 +3869,17 @@ Check one or more edge entities first. X-Direction - X-Direction + X-Richtung Y-Direction - Y-Direction + Y-Richtung Z-Direction - Z-Direction + Z-Richtung @@ -4086,22 +4086,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimentell - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4115,19 +4130,8 @@ Check one or more edge entities first. Preview Vorschau - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4662,7 +4666,7 @@ nur die beschnittenen Objeke sichtbar Box selection for shells is not supported - Boxauswahl für Hüllen wird nicht unterstützt + Rechteckauswahl wird für Hüllen nicht unterstützt @@ -4850,11 +4854,6 @@ nur die beschnittenen Objeke sichtbar Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4864,15 +4863,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-Richtung + - In y-direction - In y-direction + In Y-direction + In Y-Richtung - In z-direction - In z-direction + In Z-direction + In Z-Richtung @@ -4883,8 +4887,8 @@ of the object being attached Rotation around the local X-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local X-axis. The offset is expressed in the local coordinate system -of the object being attached. + Drehung um die lokale X-Achse. Der Versatz wird im lokalen Koordinatensystem +des befestigten Objekts dargestellt. @@ -4895,8 +4899,8 @@ of the object being attached. Rotation around the local Y-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local Y-axis. The offset is expressed in the local coordinate system -of the object being attached. + Drehung um die lokale Y-Achse. Der Versatz wird im lokalen Koordinatensystem +des befestigten Objekts dargestellt. @@ -4907,8 +4911,8 @@ of the object being attached. Rotation around the local Z-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local Z-axis. The offset is expressed in the local coordinate system -of the object being attached. + Drehung um die lokale Z-Achse. Der Versatz wird im lokalen Koordinatensystem +des befestigten Objekts dargestellt. @@ -4921,82 +4925,82 @@ of the object being attached. Seiten spiegeln - + OCC error: %1 OCC-Fehler: %1 - + unknown error unbekannter Fehler - + Attachment mode failed: %1 Bindungsmethode fehlgeschlagen: %1 - + Not attached Nicht befestigt - + Attached with mode %1 Befestigungsverfahren: %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Fläche - + Edge Kante - + Vertex Knoten - + Reference%1 Referenz%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nicht editierbar, da der Rotationsteil des Befestigungsversatzes durch Ausdrücke gebunden ist. - + Reference combinations: Referenz-Kombinationen: - + %1 (add %2) %1 (%2 hinzufügen) - + %1 (add more references) %1 (weitere Referenzen hinzufügen) @@ -5294,12 +5298,12 @@ Einzelne Überprüfungen boolescher Verknüpfungen: PartGui::TaskDlgAttacher - + Attachment Befestigen - + Datum dialog: input error Datum dialog: input error @@ -5453,7 +5457,7 @@ Einzelne Überprüfungen boolescher Verknüpfungen: Box Selection - Box Selection + Rechteckauswahl @@ -5523,23 +5527,23 @@ für die Spine-Kurve in der 3D-Ansicht auswählen. PartGui::ThicknessWidget - - + + Thickness Dicke - + Select faces of the source object and press 'Done' Flächen des Ausgangsobjekts auswählen und 'Fertig' drücken - + Done Fertig - + Input error Eingabefehler @@ -5635,8 +5639,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Keine ausgewählten Referenzen @@ -5978,7 +5982,7 @@ Continue? Appearance per Face - Appearance per Face + Aussehen per Fläche @@ -6016,7 +6020,7 @@ Continue? Part Tools - Part Tools + Part-Werkzeuge @@ -6579,7 +6583,7 @@ Overlapping volumes of the shapes will be removed. Supports making planar faces with holes with islands in them - Supports making planar faces with holes with islands in them + Unterstützt das Erstellen ebener Flächen mit Löchern und Inseln darin @@ -6592,7 +6596,7 @@ Overlapping volumes of the shapes will be removed. Supports making planar faces with holes, but no islands inside holes - Supports making planar faces with holes, but no islands inside holes + Unterstützt das Erstellen ebener Flächen mit Löchern, aber ohne Inseln darin @@ -6613,7 +6617,7 @@ Overlapping volumes of the shapes will be removed. Appearance per Face - Appearance per Face + Aussehen flächenweise festlegen @@ -6653,7 +6657,7 @@ Overlapping volumes of the shapes will be removed. Box Selection - Box Selection + Rechteckauswahl @@ -6972,7 +6976,7 @@ Overlapping volumes of the shapes will be removed. Supports making planar faces with holes and holes as faces - Supports making planar faces with holes and holes as faces + Unterstützt das Erstellen ebener Flächen mit Löchern und Löchern als Flächen @@ -7132,7 +7136,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 565c330d7d..e66b0b40be 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -2221,7 +2221,7 @@ of the projection. Convert mesh - + Edit attachment Edit attachment @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Προεπισκόπηση - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Αντιστροφή πλευρών - + OCC error: %1 Σφάλμα OCC: %1 - + unknown error άγνωστο σφάλμα - + Attachment mode failed: %1 Η λειτουργία συνημμένων απέτυχε: %1 - + Not attached Δεν επισυνάπτεται - + Attached with mode %1 Επισυνάπτεται με τη χρήση της λειτουργίας %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Όψη - + Edge Ακμή - + Vertex Vertex - + Reference%1 Αναφορά%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: Reference combinations: - + %1 (add %2) %1 (προσθήκη του %2) - + %1 (add more references) %1 (προσθήκη περισσοτέρων αναφορών) @@ -5299,12 +5303,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Συνημμένο - + Datum dialog: input error Datum dialog: input error @@ -5528,23 +5532,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Πάχος - + Select faces of the source object and press 'Done' Επιλέξτε όψεις του πηγαίου αντικειμένου και πιέστε την επιλογή 'Έγινε' - + Done Έγινε - + Input error Σφάλμα εισαγωγής @@ -5640,8 +5644,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Δεν επιλέχθηκε κανένα αντικείμενο αναφοράς @@ -7137,7 +7141,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 96df7cbb68..70cd512647 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -2221,7 +2221,7 @@ of the projection. Convertir malla - + Edit attachment Editar adjunto @@ -4087,22 +4087,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4116,19 +4131,8 @@ Check one or more edge entities first. Preview Pre-visualizar - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4851,11 +4855,6 @@ solo los cortes creados serán visibles Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4865,15 +4864,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4922,82 +4926,82 @@ of the object being attached. Voltear caras - + OCC error: %1 Error OCC: %1 - + unknown error error desconocido - + Attachment mode failed: %1 Modo de conexión falló: %1 - + Not attached No adjuntado - + Attached with mode %1 Atado con el modo %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Cara - + Edge Arista - + Vertex Vértice - + Reference%1 Referencia%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. No editable porque la rotación del DesfaseAdjunto está vinculada por expresiones. - + Reference combinations: Combinaciones de referencia: - + %1 (add %2) %1 (Añadir %2) - + %1 (add more references) %1 (añadir más referencias) @@ -5295,12 +5299,12 @@ Comprobación de operaciones booleanas individuales: PartGui::TaskDlgAttacher - + Attachment Adjunto - + Datum dialog: input error Datum dialog: input error @@ -5524,23 +5528,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Espesor - + Select faces of the source object and press 'Done' Seleccionar caras del objeto de origen y pulse 'Hecho' - + Done Hecho - + Input error Error de entrada @@ -5636,8 +5640,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Ninguna referencia seleccionada @@ -7133,7 +7137,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index ed5f24e70e..402e6166e3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -2221,7 +2221,7 @@ of the projection. Bihurtu amarauna - + Edit attachment Editatu eranskina @@ -4087,22 +4087,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Esperimentala - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4116,19 +4131,8 @@ Check one or more edge entities first. Preview Aurrebista - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4851,11 +4855,6 @@ sortutako mozketak soilik daude ikusgai Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4865,15 +4864,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4922,82 +4926,82 @@ of the object being attached. Irauli aldeak - + OCC error: %1 OCC errorea: %1 - + unknown error errore ezezaguna - + Attachment mode failed: %1 Eranste moduak huts egin du: %1 - + Not attached Ez erantsia - + Attached with mode %1 %1 moduan erantsia - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Aurpegia - + Edge Ertza - + Vertex Erpina - + Reference%1 %1. erreferentzia - + Not editable because rotation of AttachmentOffset is bound by expressions. Ezin da editatu eranskin-desplazamenduaren biraketa adierazpenez mugatuta dagoelako. - + Reference combinations: Erreferentzia-konbinazioak: - + %1 (add %2) %1 (gehitu %2) - + %1 (add more references) %1 (gehitu erreferentzia gehiago) @@ -5298,12 +5302,12 @@ Eragiketa boolearren banakako egiaztatzeak: PartGui::TaskDlgAttacher - + Attachment Eranskina - + Datum dialog: input error Datum dialog: input error @@ -5527,23 +5531,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Lodiera - + Select faces of the source object and press 'Done' Hautatu iturburu-objektuko aurpegiak eta sakatu 'Eginda' - + Done Egina - + Input error Sarrera-errorea @@ -5639,8 +5643,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Ez da erreferentziarik hautatu @@ -7136,7 +7140,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index e355c3b635..8ab9b1da7c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -2221,7 +2221,7 @@ of the projection. Convert mesh - + Edit attachment Muokkaa liitettä @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Esikatselu - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Vaihda puolet - + OCC error: %1 OCC-virhe: %1 - + unknown error tuntematon virhe - + Attachment mode failed: %1 Liitosmoodi epäonnistui: %1 - + Not attached Ei liitetty - + Attached with mode %1 Liitetty moodilla %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Pinta - + Edge Reuna - + Vertex Kärkipiste - + Reference%1 Viittaus%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: Viittausten yhdistelmät: - + %1 (add %2) %1 (lisää %2) - + %1 (add more references) %1 (lisää viitteitä) @@ -5300,12 +5304,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Liitos - + Datum dialog: input error Datum dialog: input error @@ -5529,23 +5533,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Paksuus - + Select faces of the source object and press 'Done' Valitse lähdeobjektin pintatahkoja ja paina 'Valmis' - + Done Valmis - + Input error Syötteen virhe @@ -5641,8 +5645,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Ei viittausta valittuna @@ -7138,7 +7142,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 062a8a1121..ef9308e29e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -2252,7 +2252,7 @@ La vue de la caméra détermine la direction de la projection. Convertir le maillage - + Edit attachment Modifier l'ancrage @@ -2391,17 +2391,17 @@ Remarque : le placement est exprimé dans l'espace local de l'objet auquel il es In X-direction - In X-direction + Dans la direction X In Y-direction - In Y-direction + Dans la direction Y In Z-direction - In Z-direction + Dans la direction Z @@ -3897,17 +3897,17 @@ Vérifier d'abord une ou plusieurs arrête(s). X-Direction - X-Direction + Direction X Y-Direction - Y-Direction + Direction Y Z-Direction - Z-Direction + Direction Z @@ -4116,24 +4116,39 @@ Vérifier d'abord une ou plusieurs arrête(s). Passer au panneau des tâches lors de l'accès à l'atelier PartDesign - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Expérimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors - These settings are experimental and may result in decreased stability, problems and undefined behaviors + Ces paramètres sont expérimentaux et peuvent entraîner une diminution de la stabilité, des problèmes et des comportements inconnus. - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging - Disable recompute while dragging + Désactiver le recalcul lors des glissements @@ -4145,19 +4160,8 @@ Vérifier d'abord une ou plusieurs arrête(s). Preview Aperçu - - - Show final result by default when editing feature - Afficher par défaut le résultat final lors de la modification d'une fonction - - - - Show transparent preview overlay by default when editing feature - Afficher par défaut un aperçu transparent lors de la modification d'une fonction - - Allow multiple solids in Part Design bodies by default Permettre par défaut que plusieurs solides soient dans des corps de PartDesign @@ -4874,11 +4878,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Décalage de l'ancrage dans son système de coordonnées locales. - - - In x-direction - Dans la direction X - @@ -4887,14 +4886,19 @@ only created cuts will be visible of the object being attached Le décalage est exprimé dans le système de coordonnées local de l'objet auquel il est ancré. + + + In X-direction + Dans la direction X + - In y-direction + In Y-direction Dans la direction Y - In z-direction + In Z-direction Dans la direction Z @@ -4944,82 +4948,82 @@ Remarque : le décalage est exprimé dans le système de coordonnées local de l Inverser les côtés - + OCC error: %1 Erreur OCC : %1 - + unknown error erreur inconnue - + Attachment mode failed: %1 Le mode d'ancrage a échoué : %1 - + Not attached Non ancré - + Attached with mode %1 Ancré par le mode %1 - + Attachment offset (in its local coordinate system): Décalage de l'ancrage (dans son système de coordonnées locales) : - + Attachment offset (inactive - not attached): Décalage de l'ancrage (inactif et non ancré) : - + Selecting… Sélectionner… - + Face Face - + Edge Arête - + Vertex Sommet - + Reference%1 Référence%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Non modifiable parce que la rotation du décalage de l'ancrage est définie par des expressions. - + Reference combinations: Combinaisons de référence : - + %1 (add %2) %1 (ajouter %2) - + %1 (add more references) %1 (ajouter plus de références) @@ -5333,12 +5337,12 @@ Valeur par défaut : true PartGui::TaskDlgAttacher - + Attachment Ancrage - + Datum dialog: input error Boîte de dialogue de la référence : erreur de saisie @@ -5561,23 +5565,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Paramètres de l'évidemment - + Select faces of the source object and press 'Done' Sélectionner des faces de l'objet source et cliquer sur "Valider" - + Done Valider - + Input error Erreur de saisie @@ -5673,8 +5677,8 @@ Voulez-vous continuer ? Sélectionner 2 arêtes ou 2 polylignes - - + + No reference selected Aucune référence sélectionnée @@ -7117,7 +7121,7 @@ Ancrage Reverse the direction of the pattern. - Reverse the direction of the pattern. + Inverser la direction du motif @@ -7143,7 +7147,7 @@ Ancrage Add spacing to create spacing patterns. - Add spacing to create spacing patterns. + Ajouter des espaces pour créer des motifs d'espacement @@ -7159,18 +7163,18 @@ Ancrage Spacing %1 - Spacing %1 + Espacement %1 Remove this spacing definition. - Remove this spacing definition. + Supprimer cette définition d'espacement PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. L'affichage de l'aperçu a échoué : %1. Cela indique généralement une erreur au niveau du modèle. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index fc54328e36..9503d7c5e3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -2221,7 +2221,7 @@ of the projection. Pretvori mrežu - + Edit attachment Uređivanje privitka @@ -4091,22 +4091,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Eksperimentalno - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4120,19 +4135,8 @@ Check one or more edge entities first. Preview Pregled - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4857,11 +4861,6 @@ bit će vidljivi samo stvoreni rezovi Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4871,15 +4870,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4930,82 +4934,82 @@ of the object being attached. Prebaci strane - + OCC error: %1 OCC greška: %1 - + unknown error nepoznata greška - + Attachment mode failed: %1 Dodavanje nije uspjelo: %1 - + Not attached Nije dodano - + Attached with mode %1 Pričvršćen u načinu rada %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Površina - + Edge Rub - + Vertex Vrh - + Reference%1 Referenca%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nije moguće uređivati rotaciju pomaka pridruženja jer je ograničena sa izrazom. - + Reference combinations: Kombinacija referenci: - + %1 (add %2) %1 (dodaj %2) - + %1 (add more references) %1 (dodaj više referenci) @@ -5307,12 +5311,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Dodatak - + Datum dialog: input error Datum dialog: input error @@ -5536,23 +5540,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Debljina - + Select faces of the source object and press 'Done' Odaberite povrčšine izvornog objekta i pritisnite 'Gotovo' - + Done Gotovo - + Input error Pogreška na ulazu @@ -5648,8 +5652,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Referenca još nije postavljena @@ -7169,7 +7173,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 17ea3cbd18..97fd8975cb 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -2221,7 +2221,7 @@ of the projection. Rács konvertálása - + Edit attachment Csatolmány szerkesztése @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Kísérleti - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Előnézet - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4851,11 +4855,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4865,15 +4864,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4922,82 +4926,82 @@ of the object being attached. Oldalak megfordítása - + OCC error: %1 OCC hiba: %1 - + unknown error ismeretlen hiba - + Attachment mode failed: %1 Csatolási mód sikertelen: %1 - + Not attached Nem csatolt - + Attached with mode %1 Csatolt ezzel a móddal %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Felület - + Edge Él - + Vertex Végpont - + Reference%1 Hivatkozás%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nem szerkeszthető, mert a csatolt eltolás elforgatás egy kifejezéssel kényszerített. - + Reference combinations: Hivatkozás kombinációk: - + %1 (add %2) %1 (hozzáad %2) - + %1 (add more references) %1 (további hivatkozás hozzáadása) @@ -5296,12 +5300,12 @@ Egyedi logikai művelet ellenőrzés: PartGui::TaskDlgAttacher - + Attachment Melléklet - + Datum dialog: input error Datum dialog: input error @@ -5525,23 +5529,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Vastagság - + Select faces of the source object and press 'Done' Válassza ki a forrásobjektum felületeit, és kattintson a 'Kész' gombra - + Done Kész - + Input error Bemeneti hiba @@ -5637,8 +5641,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Nincs kijelölt hivatkozás @@ -7134,7 +7138,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 92511adad0..091c7f02ce 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -1714,7 +1714,7 @@ Convert to Solid - Convert to Solid + Converti in Solido @@ -2221,7 +2221,7 @@ of the projection. Converti mesh - + Edit attachment Modifica associazione @@ -3588,27 +3588,27 @@ Check one or more edge entities first. X min/max - X min/max + X min/max Y min/max - Y min/max + Y min/max Z min/max - Z min/max + Z min/max X2 min/max - X2 min/max + X2 min/max Z2 min/max - Z2 min/max + Z2 min/max @@ -3618,7 +3618,7 @@ Check one or more edge entities first. Coordinate system - Coordinate system + Sistema di coordinate @@ -3760,12 +3760,12 @@ Check one or more edge entities first. Add Face - Add Face + Aggiungi Faccia Add Wire - Add Wire + Aggiungi Polilinea @@ -3775,7 +3775,7 @@ Check one or more edge entities first. Show edges - Show edges + Mostra bordi @@ -3795,7 +3795,7 @@ Check one or more edge entities first. Get Current Camera Direction - Get Current Camera Direction + Ottieni Direzione Fotocamera Corrente @@ -4085,22 +4085,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Sperimentale - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4114,19 +4129,8 @@ Check one or more edge entities first. Preview Anteprima - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4849,11 +4853,6 @@ saranno visibili solo i tagli creati Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4863,15 +4862,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4920,82 +4924,82 @@ of the object being attached. Capovolgi le facce - + OCC error: %1 Errore OCC: %1 - + unknown error errore sconosciuto - + Attachment mode failed: %1 Modalità di associazione non riuscita: %1 - + Not attached Non associato - + Attached with mode %1 Associato con modalità %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Faccia - + Edge Bordo - + Vertex Vertice - + Reference%1 Riferimento%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Non modificabile perché la rotazione di AttachmentOffset è vincolata da espressioni. - + Reference combinations: Combinazioni di riferimenti: - + %1 (add %2) %1 (aggiungere %2) - + %1 (add more references) %1 (aggiungere ulteriori riferimenti) @@ -5296,12 +5300,12 @@ Controlli individuali delle operazioni booleane: PartGui::TaskDlgAttacher - + Attachment Associazione - + Datum dialog: input error Datum dialog: input error @@ -5525,23 +5529,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Spessore - + Select faces of the source object and press 'Done' Selezionare le facce dell'oggetto di origine e premere 'OK' - + Done Fatto - + Input error Errore di input @@ -5637,8 +5641,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Nessun riferimento selezionato @@ -5825,12 +5829,12 @@ Continue? Not closed - Not closed + Non chiuso Not connected - Not connected + Non connesso @@ -5840,7 +5844,7 @@ Continue? Bad orientation - Bad orientation + Orientamento errato @@ -6082,7 +6086,7 @@ Continue? Bad Selection - Bad Selection + Selezione Errata @@ -6130,7 +6134,7 @@ Continue? Bad Selection - Bad Selection + Selezione Errata @@ -6180,7 +6184,7 @@ for collision or distance filtering. Bad Selection - Bad Selection + Selezione Errata @@ -6213,7 +6217,7 @@ for collision or distance filtering. Bad Selection - Bad Selection + Selezione Errata @@ -6673,7 +6677,7 @@ Overlapping volumes of the shapes will be removed. Bad Selection - Bad Selection + Selezione Errata @@ -7134,7 +7138,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 3a02dd83a9..1792049dcb 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -2221,7 +2221,7 @@ of the projection. メッシュを変換 - + Edit attachment 添付ファイルを編集 @@ -4085,22 +4085,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental 実験的機能 - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4114,19 +4129,8 @@ Check one or more edge entities first. Preview プレビュー - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4845,11 +4849,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4859,15 +4858,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4916,82 +4920,82 @@ of the object being attached. 面を反転 - + OCC error: %1 OCCエラー: %1 - + unknown error 不明なエラー - + Attachment mode failed: %1 アタッチメントモード失敗: %1 - + Not attached アタッチされていません。 - + Attached with mode %1 モード %1 でアタッチ - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face 面 - + Edge エッジ - + Vertex 頂点 - + Reference%1 参照 %1 - + Not editable because rotation of AttachmentOffset is bound by expressions. AttachmentOffsetの回転が式によって束縛されているため、編集できません。 - + Reference combinations: 参照の組み合わせ: - + %1 (add %2) %1（%2を追加） - + %1 (add more references) %1（さらに参照を追加） @@ -5287,12 +5291,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment アタッチメント - + Datum dialog: input error Datum dialog: input error @@ -5516,23 +5520,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness 厚み - + Select faces of the source object and press 'Done' 元となるオブジェクトの面を選択して「終了」を押してください - + Done 終了 - + Input error 入力エラー @@ -5628,8 +5632,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected 参照が選択されていません。 @@ -7125,7 +7129,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts index 114698e2cc..e637430873 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts @@ -2220,7 +2220,7 @@ of the projection. მრავალკუთხა ბადის გარდაქმნა - + Edit attachment მიმაგრების ჩასწორება @@ -3866,17 +3866,17 @@ Check one or more edge entities first. X-Direction - X-Direction + X მიმართულება Y-Direction - Y-Direction + Y მიმართულება Z-Direction - Z-Direction + Z მიმართულება @@ -4086,22 +4086,37 @@ Check one or more edge entities first. ამოცანის პანელზე გადართვა ნაწილის შექმნის სამუშაო მაგიდაზე გადართვისას - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental ექსპერიმენტული - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4115,19 +4130,8 @@ Check one or more edge entities first. Preview გადახედვა - - - Show final result by default when editing feature - საბოლოო შედეგის ნაგულისხმევად ჩვენება თვისების ჩასწორებისას - - - - Show transparent preview overlay by default when editing feature - გამჭვირვალე მინიატურის განლაგების ნაგულისხმევად ჩვენება თვისების ჩასწორებისას - - Allow multiple solids in Part Design bodies by default ერთზე მეტი მყარი სხეულის ნაგულისხმევი დაშვება ნაწილის შექმნის სხეულებში @@ -4849,11 +4853,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System მიმაგრების წანაცვლება მის ლოკალურ კოორდინატების სისტემაში - - - In x-direction - X მიმართულებით - @@ -4863,15 +4862,20 @@ of the object being attached წანაცვლება გამოისახება იმ ობიექტის ლოკალურ კოორდინატების სისტემაში, რომლის მიმაგრებაც მიმდინარეობს + + + In X-direction + In X-direction + - In y-direction - Y მიმართულებით + In Y-direction + In Y-direction - In z-direction - Z მიმართულებით + In Z-direction + In Z-direction @@ -4920,82 +4924,82 @@ of the object being attached. გვერდებისთვის ადგილის გაცვლა - + OCC error: %1 OCC-ის შეცდომა: %1 - + unknown error გაურკვეველი შეცდომა - + Attachment mode failed: %1 მიმაგრების რეჟიმის შეცდომა: %1 - + Not attached არაა მიმაგრებული - + Attached with mode %1 მიბმულია რეჟიმში %1 - + Attachment offset (in its local coordinate system): მიმაგრების წანაცვლება (მის ლოკალურ კოორდინატების სისტემაში): - + Attachment offset (inactive - not attached): მიმაგრების წანაცვლება (არააქტიური - არაფერია მიმაგრებული): - + Selecting… არჩევა… - + Face ზედაპირი - + Edge წიბო - + Vertex წვერო - + Reference%1 ორიენტირი %1 - + Not editable because rotation of AttachmentOffset is bound by expressions. არაა ჩასწორებადი იმიტომ, რომ AttachmentOffset-ის ტრიალი ჩაკეტილი გამონათქვამებით. - + Reference combinations: ბმის კომბინაციები: - + %1 (add %2) %1 (%2-ის დამატება) - + %1 (add more references) %1 (დაამატეთ მეტი ბმა) @@ -5294,12 +5298,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment დანართი - + Datum dialog: input error სიდიდის დიალოგი: შეყვანის შეცდომა @@ -5523,23 +5527,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness სისქე - + Select faces of the source object and press 'Done' მონიშნეთ წყარო ობიექტის ზედაპირები და დააწექით 'მზადაა' - + Done მზადაა - + Input error შეყვანის შეცდომა @@ -5635,8 +5639,8 @@ Continue? მონიშნეთ ან 2 წიბო, ან 2 პოლიხაზი. - - + + No reference selected მიბმა არჩეული არაა @@ -6016,7 +6020,7 @@ Continue? Part Tools - Part Tools + ნაწილის ხელსაწყოები @@ -7121,7 +7125,7 @@ Overlapping volumes of the shapes will be removed. Spacing %1 - Spacing %1 + დაშორება %1 @@ -7132,7 +7136,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. მინიატურის რენდერი ჩავარდა: %1. ეს, ჩვეულებრივ, მოდელის შეცდომას ნიშნავს. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index dd18ab040b..2a779780ec 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -2221,7 +2221,7 @@ of the projection. Convert mesh - + Edit attachment 부착 정보 편집 @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental 실험적 - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview 미리보기 - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4852,11 +4856,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4866,15 +4865,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4923,82 +4927,82 @@ of the object being attached. 반대쪽으로 - + OCC error: %1 OCC 오류: %1 - + unknown error 알 수 없는 오류 - + Attachment mode failed: %1 부착 방식 실패: %1 - + Not attached 부착되지 않음 - + Attached with mode %1 %1 방식으로 부착됨 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face 면 - + Edge 모서리 - + Vertex 꼭지점 - + Reference%1 참조%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: 참조 결합: - + %1 (add %2) %1 (add %2) - + %1 (add more references) %1 (add more references) @@ -5298,12 +5302,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment 부착 - + Datum dialog: input error Datum dialog: input error @@ -5527,23 +5531,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness 두께 - + Select faces of the source object and press 'Done' 원본 대상체의 면을 선택하고 '완료' 클릭 - + Done 완료 - + Input error 입력 오류 @@ -5639,8 +5643,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected 아무 참조도 선택되지 않음 @@ -7136,7 +7140,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index ee5ec752c1..92278f0044 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -2221,7 +2221,7 @@ of the projection. Convert mesh - + Edit attachment Bijlage bewerken @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimenteel - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Voorbeeldweergave - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Zijden spiegelen - + OCC error: %1 OCC fout: %1 - + unknown error onbekende fout - + Attachment mode failed: %1 Bijlage mode heeft gefaald: %1 - + Not attached Niet toegevoegd - + Attached with mode %1 Toegevoegd met mode %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Vlak - + Edge Rand - + Vertex Hoekpunt - + Reference%1 Referentie%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: Referentie combinaties: - + %1 (add %2) %1 (Voeg toe %2) - + %1 (add more references) %1 (Voeg meer referenties toe) @@ -5300,12 +5304,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Bijlage - + Datum dialog: input error Datum dialog: input error @@ -5529,23 +5533,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Dikte - + Select faces of the source object and press 'Done' Selecteer de oppervlakken van het bronobject en druk op 'Gereed' - + Done Klaar - + Input error Invoerfout @@ -5641,8 +5645,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Geen referentie geselecteerd @@ -7138,7 +7142,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index b951caff16..931732ba78 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -883,37 +883,44 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Align XY-plane to osculating circle of an edge. Optional vertex link defines where. Attachment3D mode tooltip - Align XY-plane to osculating circle of an edge. Optional vertex link defines where. + Wyrównuje płaszczyznę XY do okręgu krzywizny krawędzi. +Opcjonalne powiązanie z wierzchołkiem określa miejsce wyrównania. XY-plane by 3 points Attachment3D mode caption - XY-plane by 3 points + Płaszczyzna XY wyznaczona przez trzy punkty Align XY-plane to pass through three vertices. Attachment3D mode tooltip - Align XY-plane to pass through three vertices. + Wyrównaj płaszczyznę XY by przechodziła przez trzy wierzchołki. XZ-plane by 3 points Attachment3D mode caption - XZ-plane by 3 points + Płaszczyzna XZ wyznaczona przez trzy punkty Align XZ-plane to pass through 3 points; X axis will pass through two first points. Attachment3D mode tooltip - Align XZ-plane to pass through 3 points; X axis will pass through two first points. + Wyrównaj płaszczyznę XZ by przechodziła przez trzy wierzchołki. +Oś X będzie przechodzić przez dwa pierwsze punkty. Specialty mode for folding polyhedra. Select 4 edges in order: foldable edge, fold line, other fold line, other foldable edge. XY-plane will be aligned to folding the first edge. Attachment3D mode tooltip - Specialty mode for folding polyhedra. Select 4 edges in order: foldable edge, fold line, other fold line, other foldable edge. XY-plane will be aligned to folding the first edge. + Tryb specjalny dla składania wielościanów. Wybierz cztery krawędzie w porządku: +- składana krawędź, +- zagięcie linii, +- kolejne zagięcie linii, +- kolejne składana krawędź. +Płaszczyzna XY będzie wyrównana do składania pierwszej krawędzi. @@ -1067,12 +1074,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Block Definition - Block Definition + Definicja bloku First Limit - First Limit + Pierwsze ograniczenie @@ -1120,7 +1127,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Limit - Limit + Ograniczenie @@ -1130,7 +1137,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Second Limit - Second Limit + Drugie ograniczenie @@ -1187,12 +1194,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Box Selection - Box Selection + Zaznacz obszarem Selects elements in the 3D view using a box selection - Selects elements in the 3D view using a box selection + Wybiera elementy w widoku 3D używając obszaru zaznaczenia @@ -1215,7 +1222,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Analyzes the selected shapes for errors - Analyzes the selected shapes for errors + Analizuje wybrane kształty pod kątem błędów @@ -1228,12 +1235,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Appearance per &Face - Appearance per &Face + Wygląd dla ś&ciany Sets the appearance of individual faces of the selected object - Sets the appearance of individual faces of the selected object + Ustawia wygląd poszczególnych ścian wybranego obiektu @@ -1251,7 +1258,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Applies a boolean operations with the selected shapes - Applies a boolean operations with the selected shapes + Wykonuje operacje logiczne na wybranych kształtach @@ -1271,7 +1278,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Creates a solid cube - Creates a solid cube + Tworzy bryłę sześcianu @@ -1284,12 +1291,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Box Fix 1 - Box Fix 1 + Pole poprawki 1 Creates a solid box - Creates a solid box + Tworzy bryłę prostopadłościanu @@ -1302,12 +1309,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Box Fix 2 - Box Fix 2 + Pole poprawki 2 Creates a solid box - Creates a solid box + Tworzy bryłę prostopadłościanu @@ -1320,7 +1327,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Shape Builder - Shape Builder + Konstruktor kształtu @@ -1343,7 +1350,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Chamfers the selected edges of a shape - Chamfers the selected edges of a shape + Fazuje wybrane krawędzie obiektu @@ -1361,7 +1368,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Intersects the selected shapes - Intersects the selected shapes + Przecina zaznaczone kształty @@ -1374,12 +1381,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Compound Tools - Compound Tools + Narzędzia złożeń Compound tools for working with multiple shapes - Compound tools for working with multiple shapes + Narzędzia złożeń do pracy z wieloma kształtami @@ -1392,12 +1399,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Join Shapes - Join Shapes + Łączy kształty Joins the selected walled shapes - Joins the selected walled shapes + Łączy wybrane kształty otoczone ściankami @@ -1428,12 +1435,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Split Shapes - Split Shapes + Podziel kształty Shape splitting and compsolid creation tools - Shape splitting and compsolid creation tools + Narzędzia do dzielenia kształtu i tworzenia brył zespolonych @@ -1451,7 +1458,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Compounds the selected shapes - Compounds the selected shapes + Wykonuje złożenia z wybranych kształtów @@ -1471,7 +1478,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Creates a solid cone - Creates a solid cone + Tworzy bryłę stożka @@ -1484,12 +1491,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Cross-Sections - Cross-Sections + Przekroje poprzeczne Creates cross-sections - Creates cross-sections + Tworzy przekroje poprzeczne @@ -1507,7 +1514,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Cuts 2 selected shapes - Cuts 2 selected shapes + Przecina 2 wybrane kształty @@ -1527,7 +1534,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Creates a solid cylinder - Creates a solid cylinder + Tworzy bryłę walca @@ -1545,7 +1552,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Removes the selected features from a shape - Removes the selected features from a shape + Usuwa wybrane cechy z kształtu @@ -1558,12 +1565,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Shape Element Copy - Shape Element Copy + Kopiuj kształt elementu Creates a non-parametric copy of the selected shape element - Creates a non-parametric copy of the selected shape element + Tworzy nieparametryczną kopię wybranego kształtu @@ -1576,7 +1583,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Export CAD File - Export CAD File + Eksportuj plik CAD @@ -1599,7 +1606,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Extrudes the selected sketch or profile - Extrudes the selected sketch or profile + Wyciąga zaznaczony szkic lub profil @@ -1617,7 +1624,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Fillets the selected edges of a shape - Fillets the selected edges of a shape + Tworzy zaokrąglenie wybranych krawędzi obiektu @@ -1635,7 +1642,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Unites the selected shapes - Unites the selected shapes + Scala wybrane kształty @@ -1648,7 +1655,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Import CAD File - Import CAD File + Importuj plik CAD @@ -1666,12 +1673,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Import Curve Network - Import Curve Network + Importuj sieć krzywych Imports a curve network - Imports a curve network + Importuje sieć krzywych @@ -1689,7 +1696,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Lofts the selected profiles - Lofts the selected profiles + Wyciągnięcie przez profile zaznaczonych profili @@ -1702,12 +1709,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Face From Wires - Face From Wires + Ściana z krzywej złożonej Creates a face from the selected wires (e.g. from a sketch) - Creates a face from the selected wires (e.g. from a sketch) + Tworzy ścianę z wybranych linii złożonych (np. ze szkicu) @@ -1720,12 +1727,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Convert to Solid - Convert to Solid + Przekształć na bryłę Converts the selected shell or compound to a solid - Converts the selected shell or compound to a solid + Konwertuje zaznaczoną powłokę lub złożenie na bryłę @@ -1743,7 +1750,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Mirrors the selected shape - Mirrors the selected shape + Tworzy odbicie lustrzane wybranego kształtu @@ -1756,12 +1763,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. 3D Offset - 3D Offset + Odsunięcie 3D Offsets shapes in 3D - Offsets shapes in 3D + Odsunięcie kształtów w przestrzeni 3D @@ -1774,12 +1781,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. 2D Offset - 2D Offset + Odsunięcie 2D Offsets planar shapes in 2D - Offsets planar shapes in 2D + Odsunięcie kształtów planarnych w przestrzeni 2D @@ -1792,12 +1799,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Pick Curve Network - Pick Curve Network + Wybierz sieć krzywych Picks a curve network - Picks a curve network + Wybiera sieć krzywych @@ -1810,12 +1817,12 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Points From Shape - Points From Shape + Punkty z kształtu Creates distributed points from the selected shape - Creates distributed points from the selected shape + Tworzy rozproszone punkty z wybranego kształtu @@ -1833,7 +1840,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Creates solid geometric primitives parametrically - Creates solid geometric primitives parametrically + Tworzy parametryczne prymitywy geometryczne @@ -1846,7 +1853,7 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. Project on Surface - Project on Surface + Rzut na powierzchnię @@ -1854,10 +1861,9 @@ Płaszczyzna będzie wyrównana do składania pierwszej krawędzi. onto a face of another shape. The camera view determines the direction of the projection. - Projects edges, wires, or faces of one shape -onto a face of another shape. -The camera view determines the direction -of the projection. + Rzutuje krawędzie, krzywe złożone lub powierzchnie jednego kształtu +na powierzchnię innego kształtu. +Widok ujęcie widoku określa kierunek rzutu. @@ -1870,12 +1876,12 @@ of the projection. Refine Shape - Refine Shape + Udoskonal kształt Creates a refined copy of the selected shapes - Creates a refined copy of the selected shapes + Tworzy ulepszoną kopię zaznaczonych kształtów @@ -1888,12 +1894,12 @@ of the projection. Reverse Shapes - Reverse Shapes + Odwróć kształty Reverses the orientation of the selected shapes - Reverses the orientation of the selected shapes + Odwraca orientację wybranych kształtów @@ -1911,7 +1917,7 @@ of the projection. Revolves the selected shape - Revolves the selected shape + Wyciąga przez obrót wybrany kształt @@ -1924,12 +1930,12 @@ of the projection. Ruled Surface - Ruled Surface + Powierzchnia prostokreślna Creates a ruled surface between 2 selected wires - Creates a ruled surface between 2 selected wires + Tworzy powierzchnię prostokreślną pomiędzy 2 wybranymi liniami złożonymi @@ -1947,7 +1953,7 @@ of the projection. Sections 2 selected shapes - Sections 2 selected shapes + Przekroje dwóch zaznaczonych kształtów @@ -1960,12 +1966,12 @@ of the projection. Shape From Mesh - Shape From Mesh + Kształt z siatki Creates a shape from the selected mesh - Creates a shape from the selected mesh + Tworzy kształt z zaznaczonej siatki @@ -1983,7 +1989,7 @@ of the projection. Creates a simple non-parametric copy of the selected shapes - Creates a simple non-parametric copy of the selected shapes + Tworzy prostą nieparametryczną kopię zaznaczonych kształtów @@ -2001,7 +2007,7 @@ of the projection. Creates a solid cylinder - Creates a solid cylinder + Tworzy bryłę walca @@ -2021,7 +2027,7 @@ of the projection. Creates a solid sphere - Creates a solid sphere + Tworzy bryłę sfery @@ -2039,7 +2045,7 @@ of the projection. Sweeps profiles along a wire - Sweeps profiles along a wire + Przeciąga profile wzdłuż krzywej złożonej @@ -2057,7 +2063,7 @@ of the projection. Removes the selected faces and offsets the remaining shape outward to add thickness - Removes the selected faces and offsets the remaining shape outward to add thickness + Usuwa wybrane powierzchnie i przesuwa pozostały kształt na zewnątrz, aby dodać grubość. @@ -2087,7 +2093,7 @@ of the projection. Creates a solid torus - Creates a solid torus + Tworzy bryłę torusa @@ -2100,12 +2106,12 @@ of the projection. Transformed Copy - Transformed Copy + Przekształcona kopia Creates a non-parametric copy with transformed placement of the selected shapes - Creates a non-parametric copy with transformed placement of the selected shapes + Tworzy nieparametryczną kopię z przekształconym umiejscowieniem wybranych kształtów @@ -2149,7 +2155,7 @@ of the projection. Import Curve Net - Import Curve Net + Importuj sieć krzywych @@ -2184,27 +2190,27 @@ of the projection. Add coordinate system - Add coordinate system + Dodaj układ współrzędnych Add datum plane - Add datum plane + Dodaj płaszczyznę odniesienia Add datum line - Add datum line + Dodaj linię odniesienia Add datum point - Add datum point + Dodaj punkt odniesienia Create Cylinder - Create Cylinder + Utwórz walec @@ -2227,7 +2233,7 @@ of the projection. Konwertuj siatkę - + Edit attachment Edytuj dołączenie @@ -2280,7 +2286,7 @@ of the projection. Edit mirror - Edit mirror + Edytuj odbicie lustrzane @@ -2313,48 +2319,48 @@ of the projection. Attachment mode - Attachment mode + Tryb dołączenia Attachment Offset in its Local Coordinate System - Attachment Offset in its Local Coordinate System + Przesunięcie dołączenia w lokalnym systemie współrzędnych Around X-axis - Around X-axis + Wokół osi Z Rotation around the X-axis Note: The placement is expressed in local space of object being attached. - Rotation around the X-axis -Note: The placement is expressed in local space of object being attached. + Obrót wokół osi X +Uwaga: Położenie jest wyrażone w przestrzeni lokalnej dołączanego obiektu. Around Y-axis - Around Y-axis + Wokół osi Y Rotation around the Y-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Y-axis -Note: The placement is expressed in local space of object being attached. + Obrót wokół osi Y +Uwaga: Położenie jest wyrażone w przestrzeni lokalnej dołączanego obiektu. Around Z-axis - Around Z-axis + Wokół osi Z Rotation around the Z-axis Note: The placement is expressed in local space of object being attached. - Rotation around the Z-axis -Note: The placement is expressed in local space of object being attached. + Obrót wokół osi Z +Uwaga: Położenie jest wyrażone w przestrzeni lokalnej dołączanego obiektu. @@ -2366,17 +2372,17 @@ Note: The placement is expressed in local space of object being attached. In X-direction - In X-direction + W kierunku X In Y-direction - In Y-direction + W kierunku Y In Z-direction - In Z-direction + W kierunku Z @@ -2389,12 +2395,12 @@ Note: The placement is expressed in local space of object being attached. Cross Sections - Cross Sections + Przekroje poprzeczne Guiding Plane - Guiding Plane + Płaszczyzna prowadząca @@ -2439,7 +2445,7 @@ Note: The placement is expressed in local space of object being attached. Cannot compute cross-sections - Cannot compute cross-sections + Nie można obliczyć przekrojów @@ -2507,7 +2513,7 @@ Note: The placement is expressed in local space of object being attached. Swap Selection - Swap Selection + Odwróć zaznaczenie @@ -2522,17 +2528,17 @@ Note: The placement is expressed in local space of object being attached. First, select a shape on the left side - First, select a shape on the left side + Najpierw wybierz kształt po lewej stronie First, select a shape on the right side - First, select a shape on the right side + Najpierw wybierz kształt po prawej stronie One of the selected objects does not exist anymore - One of the selected objects does not exist anymore + Jeden z zaznaczonych obiektów już nie istnieje @@ -2563,7 +2569,7 @@ Note: The placement is expressed in local space of object being attached. If not empty, field contents will be used in the STEP file header - If not empty, field contents will be used in the STEP file header + Jeśli pole nie jest puste, jego zawartość zostanie użyta w nagłówku pliku STEP @@ -2619,10 +2625,9 @@ Note: The placement is expressed in local space of object being attached. - Keeps the placement information when exporting -a single object. When importing back the STEP file, the -placement will be encoded into the shape geometry, instead of keeping -it inside the placement property. + Zachowuje informacje o położeniu podczas eksportowania pojedynczego obiektu. +Należy pamiętać, że podczas ponownego importu pliku STEP, umiejscowienie zostanie zakodowane +w geometrii kształtu, zamiast wewnątrz właściwości Umiejscowienie. @@ -2718,27 +2723,27 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Extrudes perpendicularly to the plane of the input shape - Extrudes perpendicularly to the plane of the input shape + Wyciąga prostopadle do płaszczyzny kształtu wejściowego Along edge - Along edge + Wzdłuż krawędzi Reverses the direction of the extrusion - Reverses the direction of the extrusion + Odwraca kierunek wyciągania Starts the selection of edges in the 3D view - Starts the selection of edges in the 3D view + Rozpoczyna wybór krawędzi w oknie widoku 3D Specify direction manually using X, Y, Z values - Specify direction manually using X, Y, Z values + Określ kierunek samodzielnie, używając wartości X, Y, Z @@ -2763,22 +2768,22 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Along - Along + Wzdłuż Against - Against + Przeciwnie Length to extrude against the direction (can be negative) - Length to extrude against the direction (can be negative) + Długość do wyciągnięcia przeciwnie do kierunku (może być ujemna) Distributes the extrusion length equally to both sides - Distributes the extrusion length equally to both sides + Rozkłada długość wyciągnięcia równomiernie na obie strony @@ -2808,7 +2813,7 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Results in solids if wires are closed, otherwise in shells - Results in solids if wires are closed, otherwise in shells + Tworzy bryły, jeśli kontury są zamknięte, w przeciwnym razie powłoki @@ -2828,7 +2833,7 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Selecting… - Selecting… + Wybieranie … @@ -2839,7 +2844,7 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Creating extrusion failed. %1 - Creating extrusion failed. + Tworzenie wyciągnięcia nie powiodło się. %1 @@ -2857,14 +2862,15 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru No shapes selected for extrusion. - No shapes selected for extrusion. + Nie wybrano kształtów do wyciągnięcia. Cannot determine normal vector of shape to be extruded. Use other mode. (%1) - Cannot determine normal vector of shape to be extruded. Use other mode. + Nie można określić wektora normalnego kształtu do wyciągnięcia. +Użyj innego trybu. (%1) @@ -2919,7 +2925,7 @@ Wymagana wartość musi być różna od zera. Selected shape - Selected shape + Wybrany kształt @@ -2994,7 +3000,7 @@ Wymagana wartość musi być różna od zera. Chamfer parameters - Chamfer parameters + Parametry sfazowania @@ -3014,7 +3020,7 @@ Wymagana wartość musi być różna od zera. Fillet parameter - Fillet parameter + Parametry zaokrąglania @@ -3052,15 +3058,15 @@ Wymagana wartość musi być różna od zera. No valid shape is selected. Select a valid shape in the drop-down box first. - No valid shape is selected. -Select a valid shape in the drop-down box first. + Nie wybrano prawidłowego kształtu. +Najpierw wybierz prawidłowy kształt z rozwijanej listy. No edge entity is checked to fillet. Check one or more edge entities first. - No edge entity is checked to fillet. -Check one or more edge entities first. + Nie zaznaczono żadnej krawędzi do fazowania. +Najpierw zaznacz jedną lub więcej krawędzi. @@ -3124,17 +3130,17 @@ Check one or more edge entities first. Export Solids and Shells As - Export Solids and Shells As + Eksportuj bryły i powłoki jako Solids will be exported as manifold solid B-rep object, shells as shell - Solids will be exported as manifold solid B-rep object, shells as shell + Bryły zostaną wyeksportowane jako obiekt B-rep bryły spójnej, a powłoki jako powłoka. Solids (type 186) and shells (type 514) / B-rep mode - Solids (type 186) and shells (type 514) / B-rep mode + Bryły (typ 186) i Powłoki (typ 514) / tryb B-REP @@ -3197,22 +3203,22 @@ Check one or more edge entities first. Merges compounds during file reading (slower but higher details) - Merges compounds during file reading (slower but higher details) + Łączenie związków podczas odczytu pliku (wolniejsze, ale wyższe szczegóły) Enable STEP compound merge - Enable STEP compound merge + Włącz scalanie złożonych obiektów STEP Select this to use App::LinkGroup as group container, or else use App::Part - Select this to use App::LinkGroup as group container, or else use App::Part + Wybierz tę opcję, aby używać App::LinkGroup jako kontenera grupy, w przeciwnym razie używany będzie App::Part. Select this to import invisible objects - Select this to import invisible objects + Wybierz tę opcję, aby zaimportować niewidoczne obiekty @@ -3297,7 +3303,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Cylinder Definition - Cylinder Definition + Definicja walca @@ -3345,7 +3351,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a IGES Input File - IGES Input File + Plik w formacie IGES @@ -3355,7 +3361,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Search File - Search File + Szukaj pliku @@ -3376,7 +3382,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a STEP Input File - STEP Input File + Plik w formacie STEP @@ -3386,7 +3392,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Search File - Search File + Szukaj pliku @@ -3564,23 +3570,23 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a U parameter - U parameter + Parametr U V parameters - V parameters + Parametry V Radius 3 - Radius 3 + Promień 3 V parameter - V parameter + Parametr V @@ -3592,32 +3598,32 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Circumradius - Circumradius + Promień okręgu opisanego X min/max - X min/max + X min / max Y min/max - Y min/max + Y min / max Z min/max - Z min/max + Z min / max X2 min/max - X2 min/max + X2 min / max Z2 min/max - Z2 min/max + Z2 min / max @@ -3627,7 +3633,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Coordinate system - Coordinate system + Układ współrzędnych @@ -3637,34 +3643,34 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Number of rotations - Number of rotations + Liczba obrotów Angle 1 - Angle 1 + Kąt 1 Angle 2 - Angle 2 + Kąt 2 From 3 Points - From 3 Points + Przez trzy punkty Major radius - Major radius + Promień główny Minor radius - Minor radius + Promień pomocniczy @@ -3759,22 +3765,22 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Project on Surface - Project on Surface + Rzut na powierzchnię Select Projection Surface - Select Projection Surface + Wybierz powierzchnię rzutu Add Face - Add Face + Dodaj ścianę Add Wire - Add Wire + Dodaj linię złożoną @@ -3784,7 +3790,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Show edges - Show edges + Pokaż krawędzie @@ -3804,7 +3810,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Get Current Camera Direction - Get Current Camera Direction + Pobierz aktualny kierunek ujęcia widoku @@ -3824,7 +3830,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Projection object - Projection object + Obiekt do rzutowania @@ -3834,7 +3840,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Cannot create a projection object - Cannot create a projection object + Nie można utworzyć obiektu projekcji @@ -3852,48 +3858,48 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Revolution Axis - Revolution Axis + Oś obrotu Center X - Center X + X środka Center Y - Center Y + Y środka Center Z - Center Z + Z środka Sets this as axis - Sets this as axis + Ustawia jako oś X-Direction - X-Direction + Kierunek X Y-Direction - Y-Direction + Kierunek Y Z-Direction - Z-Direction + Kierunek Z Select Reference - Select Reference + Wybierz odniesienie @@ -3903,12 +3909,12 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Extends the revolution forwards and backwards by half the angle - Extends the revolution forwards and backwards by half the angle + Rozszerza obrót do przodu i do tyłu o połowę kąta Creates a solid. Otherwise it results in a shell. - Creates a solid. Otherwise it results in a shell. + Tworzy bryłę. W przeciwnym razie powstaje powłoka. @@ -3933,7 +3939,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Select a shape for revolution. - Select a shape for revolution. + Najpierw wybierz kształt do przekształcenia przez obrót. @@ -3974,7 +3980,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Selecting… (line or arc) - Selecting… (line or arc) + Wybieranie ….(linia lub łuk) @@ -3982,7 +3988,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Shape View - Shape View + Widok kształtu @@ -4022,7 +4028,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Angle deflection - Angle deflection + Odchylenie kątowe @@ -4055,22 +4061,22 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Model Settings - Model Settings + Ustawienia modelu Automatically refine model after applying operations - Automatically refine model after applying operations + Automatycznie udoskonalaj model po zastosowaniu operacji Object Naming - Object Naming + Nazewnictwo obiektów Features Settings - Features Settings + Ustawienia cech @@ -4095,53 +4101,58 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Switch to task panel when entering Part Design workbench - Switch to task panel when entering Part Design workbench + Przełącz na panel zadań podczas przechodzenia do środowiska Projekt Części - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Eksperymentalne - + These settings are experimental and may result in decreased stability, problems and undefined behaviors - These settings are experimental and may result in decreased stability, problems and undefined behaviors + Te ustawienia są eksperymentalne i mogą powodować zmniejszoną stabilność, +problemy oraz nieokreślone zachowania. - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging - Disable recompute while dragging + Wyłącz przeliczanie podczas przeciągania Automatically switch to the task panel when the Part Design workbench is activated - Automatically switch to the task panel when the Part Design workbench is activated + Automatycznie przełączaj się do panelu zadań po aktywowaniu środowiska pracy Projekt Części. Preview Podgląd - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default - Allow multiple solids in Part Design bodies by default + Domyślnie zezwalaj na wiele brył w zawartości środowiska Projekt Części @@ -4154,7 +4165,7 @@ Opcja przydatna w przypadku niektórych starszych plików STEP, z nieistotnymi a Default Shape Appearance Properties - Default Shape Appearance Properties + Domyślne właściwości wyglądu kształtu @@ -4305,7 +4316,7 @@ Użyty zostanie albo kolor podświetlenia albo czarny. Default Annotation Color - Default Annotation Color + Domyślny kolor adnotacji @@ -4356,22 +4367,22 @@ Użyty zostanie albo kolor podświetlenia albo czarny. Rotation Axis - Rotation Axis + Oś obrotu X-component of direction vector - X-component of direction vector + Składowa X wektora kierunku Y-component of direction vector - Y-component of direction vector + Składowa Y wektora kierunku Z-component of direction vector - Z-component of direction vector + Składowa Z wektora kierunku @@ -4406,7 +4417,7 @@ zostanie użyty wektor normalnej płaszczyzny szkicu At least 2 vertices, edges, wires, or faces are required. - At least 2 vertices, edges, wires, or faces are required. + Wymagane są co najmniej dwa wierzchołki, krawędzie, linie złożone lub płaszczyzny. @@ -4434,7 +4445,7 @@ zostanie użyty wektor normalnej płaszczyzny szkicu Base Point - Base Point + Punkt bazowy @@ -4454,7 +4465,7 @@ zostanie użyty wektor normalnej płaszczyzny szkicu Mirror plane - Mirror plane + Płaszczyzna odbicia lustrzanego @@ -4500,7 +4511,7 @@ zostanie użyty wektor normalnej płaszczyzny szkicu Select a shape for mirroring. - Select a shape for mirroring. + Wybierz kształt do odbicia lustrzanego. @@ -4539,7 +4550,7 @@ zostanie użyty wektor normalnej płaszczyzny szkicu Persistent Section Cut - Persistent Section Cut + Wycinek przekroju @@ -4573,13 +4584,13 @@ zostanie użyty wektor normalnej płaszczyzny szkicu Cut Face - Cut Face + Powierzchnia cięcia Color of the cut face - Color of the cut face + Kolor przeciętej ściany @@ -4588,26 +4599,26 @@ zostanie użyty wektor normalnej płaszczyzny szkicu from the cut objects. Works only properly if all objects have the same values. - Takes the color and transparency -from the cut objects. -Works only properly if all objects -have the same values. + Przyjmuje kolor i przezroczystość +z ciętych obiektów. +Działa poprawnie tylko wtedy, gdy wszystkie obiekty +mają takie same wartości. Transparency of the cut face - Transparency of the cut face + Przezroczystość ciętej powierzchni Cut Intersecting Objects - Cut Intersecting Objects + Przetnij obiekty zachodzące na siebie Refresh View - Refresh View + Aktualizuj podgląd @@ -4696,27 +4707,27 @@ only created cuts will be visible Select at least 1 edge - Select at least 1 edge + Wybierz co najmniej jedną krawędź Select at least 2 faces - Select at least 2 faces + Wybierz co najmniej dwie ściany Select only 1 shape object - Select only 1 shape object + Wybierz tylko jeden obiekt kształtu Select vertices - Select vertices + Wybierz wierzchołki Select a closed loop of edges - Select a closed loop of edges + Wybierz zamkniętą pętlę krawędzi @@ -4774,7 +4785,7 @@ only created cuts will be visible Select at least 1 edge from a single object. - Select at least 1 edge from a single object. + Wybierz co najmniej jedną krawędź z pojedynczego obiektu. @@ -4854,17 +4865,12 @@ only created cuts will be visible Attachment mode - Attachment mode + Tryb dołączenia Attachment Offset in its Local Coordinate System - Attachment Offset in its Local Coordinate System - - - - In x-direction - In x-direction + Przesunięcie dołączenia w lokalnym systemie współrzędnych @@ -4872,54 +4878,59 @@ only created cuts will be visible The offset is expressed in the local coordinate system of the object being attached - The offset is expressed in the local coordinate system -of the object being attached + Przesunięcie jest wyrażone w systemie współrzędnych lokalnych +dołączonego obiektu + + + + In X-direction + W kierunku X - In y-direction - In y-direction + In Y-direction + W kierunku Y - In z-direction - In z-direction + In Z-direction + W kierunku Z Around X-axis - Around X-axis + Wokół osi Z Rotation around the local X-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local X-axis. The offset is expressed in the local coordinate system -of the object being attached. + Obrót wokół lokalnej osi X. Przesunięcie jest wyrażone w lokalnym układzie współrzędnych +dołączanego obiektu. Around Y-axis - Around Y-axis + Wokół osi Y Rotation around the local Y-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local Y-axis. The offset is expressed in the local coordinate system -of the object being attached. + Obrót wokół lokalnej osi Y. Przesunięcie jest wyrażone w lokalnym układzie współrzędnych +dołączanego obiektu. Around Z-axis - Around Z-axis + Wokół osi Z Rotation around the local Z-axis. The offset is expressed in the local coordinate system of the object being attached. - Rotation around the local Z-axis. The offset is expressed in the local coordinate system -of the object being attached. + Obrót wokół lokalnej osi Z. Przesunięcie jest wyrażone w lokalnym układzie współrzędnych +dołączanego obiektu. @@ -4932,82 +4943,82 @@ of the object being attached. Odwróć strony - + OCC error: %1 Błąd OCC:%1 - + unknown error nieznany błąd - + Attachment mode failed: %1 Tryb mocowania nie powiódł się: %1 - + Not attached Nie dołączono - + Attached with mode %1 Dołączony w trybie %1 - + Attachment offset (in its local coordinate system): - Attachment offset (in its local coordinate system): + Przesunięcie dołączenia (w lokalnym systemie współrzędnych): - + Attachment offset (inactive - not attached): - Attachment offset (inactive - not attached): + Odsunięcie dołączenia: (nieaktywny - nie dołączono): - + Selecting… - Selecting… + Wybieranie … - + Face Ściana - + Edge Krawędź - + Vertex Wierzchołek - + Reference%1 Referencja%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nie można edytować, ponieważ obrót Odsunięcia Dołączenia jest związany przez wyrażenia. - + Reference combinations: Kombinacje odniesienia: - + %1 (add %2) %1 (dodaj %2) - + %1 (add more references) %1 (dodaj więcej odniesień) @@ -5154,7 +5165,7 @@ Pojedyncze kontrole operacji logicznych: Skip this settings page and run the geometry check automatically - Skip this settings page and run the geometry check automatically + Pomiń tę stronę ustawień i uruchom kontrolę geometrii automatycznie @@ -5217,12 +5228,12 @@ Pojedyncze kontrole operacji logicznych: Check is running… - Check is running… + Sprawdzanie jest uruchomione … Boolean operation check… - Boolean operation check… + Sprawdzanie operacji logicznych … @@ -5278,22 +5289,22 @@ Pojedyncze kontrole operacji logicznych: to report view. - to report view. + do Widoku raportu. Global minimum - Global minimum + Globalne minimum Global average - Global average + Globalna średnia Global maximum - Global maximum + Globalne maksimum @@ -5309,14 +5320,14 @@ Pojedyncze kontrole operacji logicznych: PartGui::TaskDlgAttacher - + Attachment Dołączenie - + Datum dialog: input error - Datum dialog: input error + Dialog punktu odniesienia: Błąd wejściowy @@ -5368,7 +5379,7 @@ Pojedyncze kontrole operacji logicznych: Recto verso - Recto verso + Obie strony @@ -5418,7 +5429,7 @@ Pojedyncze kontrole operacji logicznych: Create Shape - Create Shape + Utwórz kształt @@ -5468,7 +5479,7 @@ Pojedyncze kontrole operacji logicznych: Box Selection - Box Selection + Zaznacz obszarem @@ -5502,8 +5513,7 @@ Pojedyncze kontrole operacji logicznych: Select at least 1 profile and an edge or wire in the 3D view for the sweep path. - Select at least 1 profile and an edge or wire -in the 3D view for the sweep path. + Wybierz co najmniej jeden profil oraz krawędź lub ścieżkę w widoku 3D jako tor wyciągnięcia. @@ -5538,23 +5548,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Grubość - + Select faces of the source object and press 'Done' Wybierz ścianę obiektu źródłowego i kliknij "Gotowe" - + Done Gotowe - + Input error Błąd danych wejściowych @@ -5608,7 +5618,7 @@ in the 3D view for the sweep path. Select 2 shapes - Select 2 shapes + Wybierz dwa kształty @@ -5616,23 +5626,24 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Continue? - The use of non-solids for boolean operations may lead to unexpected results. -Continue? + Użycie obiektów niebędących bryłami dla operacji logicznych może doprowadzić do nieoczekiwanych rezultatów. +Czy chcesz kontynuować? Select at least 2 shapes. Alternatively, select 1 compound containing 2 or more shapes to compute the intersection between. - Select at least 2 shapes. Alternatively, select 1 compound containing 2 or more shapes to compute the intersection between. + Wybierz co najmniej dwa kształty. Alternatywnie, wybierz jeden złożony obiekt zawierający dwa lub więcej kształtów, aby obliczyć ich przecięcie. Select at least 2 shapes. Alternatively, select 1 compound containing 2 or more shapes to be fused. - Select at least 2 shapes. Alternatively, select 1 compound containing 2 or more shapes to be fused. + Zaznacz co najmniej dwa kształty. +Alternatywnie możesz zaznaczyć jeden złożony obiekt zawierający dwa lub więcej kształtów do scalenia. Select at least one shape - Select at least one shape + Wybierz przynajmniej jeden kształt @@ -5647,11 +5658,11 @@ Continue? Select either 2 edges or 2 wires. - Select either 2 edges or 2 wires. + Wybierz dowolne dwie krawędzie lub dwie linie złożone. - - + + No reference selected Nie wybrano odniesienia @@ -5678,7 +5689,7 @@ Continue? Compound solid - Compound solid + Bryła złożona @@ -5703,42 +5714,42 @@ Continue? No error - No error + Brak błędów Invalid point on curve - Invalid point on curve + Nieprawidłowy punkt na krzywej Invalid point on curve on surface - Invalid point on curve on surface + Nieprawidłowy punkt na krzywej na powierzchni Invalid point on surface - Invalid point on surface + Nieprawidłowy punkt na powierzchni No 3D curve - No 3D curve + Brak krzywej 3D Multiple 3D curves - Multiple 3D curves + Wielokrotna krzywa 3D Invalid 3D curve - Invalid 3D curve + Nieprawidłowa krzywa 3D No curve on surface - No curve on surface + Brak krzywej na powierzchni @@ -5748,192 +5759,192 @@ Continue? Invalid curve on closed surface - Invalid curve on closed surface + Nieprawidłowa krzywa na powierzchni zamkniętej Invalid same range flag - Invalid same range flag + Nieprawidłowy znacznik tego samego zakresu Invalid same parameter flag - Invalid same parameter flag + Nieprawidłowy znacznik tego samego parametru Invalid degenerated flag - Invalid degenerated flag + Nieprawidłowy znacznik degeneracji Free edge - Free edge + Wolna krawędź Invalid multi-connexity - Invalid multi-connexity + Nieprawidłowa wielokrotność połączeń Invalid range - Invalid range + Nieprawidłowy zakres Empty wire - Empty wire + Pusta linia złożona Redundant edge - Redundant edge + Nadmierna krawędź Self-intersecting wire - Self-intersecting wire + Samo przecinające się linia złożona No surface - No surface + Brak powierzchni Invalid wire - Invalid wire + Nieprawidłowa linia złożona Redundant wire - Redundant wire + Nadmiarowa linia złożona Intersecting wires - Intersecting wires + Przecinające się linie złożone Invalid imbrication of wires - Invalid imbrication of wires + Nieprawidłowe zagnieżdżenie konturów Empty shell - Empty shell + Pusta powłoka Redundant face - Redundant face + Nadmiarowa ściana Unorientable shape - Unorientable shape + Kształt nieposiadający orientacji Not closed - Not closed + Nie zamknięte Not connected - Not connected + Nie połączono Sub-shape not in shape - Sub-shape not in shape + Kształt podrzędny nie jest częścią kształtu Bad orientation - Bad orientation + Niewłaściwa orientacja Bad orientation of sub-shape - Bad orientation of sub-shape + Niewłaściwa orientacja kształtu podrzędnego Invalid tolerance value - Invalid tolerance value + Nieprawidłowa wartość tolerancji Check failed - Check failed + Sprawdzanie nie powiodło się No result - No result + Brak rezultatów Out of enum range: - Out of enum range: + Poza zakresem wyliczenia: Boolean operation: unknown check - Boolean operation: unknown check + Operacja logiczna: nieznana kontrola Boolean operation: bad type - Boolean operation: bad type + Operacja logiczna: nieprawidłowy typ Boolean operation: self-intersection found - Boolean operation: self-intersection found + Operacja logiczna: Znaleziono samo przecięcie Boolean operation: edge too small - Boolean operation: edge too small + Operacja logiczna: zbyt mała krawędź Boolean operation: non-recoverable face - Boolean operation: non-recoverable face + Operacja logiczna: ściana nieodzyskiwalna Boolean operation: incompatibility of vertex - Boolean operation: incompatibility of vertex + Operacja logiczna: niekompatybilność wierzchołka Boolean operation: incompatibility of edge - Boolean operation: incompatibility of edge + Operacja logiczna: niekompatybilność krawędzi Boolean operation: incompatibility of face - Boolean operation: incompatibility of face + Operacja logiczna: niekompatybilność ściany Boolean operation: aborted - Boolean operation: aborted + Operacja logiczna: przerwano Boolean operation: invalid curve on surface - Boolean operation: invalid curve on surface + Operacja logiczna: nieprawidłowa krzywa na powierzchni Boolean operation: not valid - Boolean operation: not valid + Operacja logiczna: Nieprawidłowa @@ -5948,17 +5959,17 @@ Continue? Edit Mirror Plane - Edit Mirror Plane + Edytuj płaszczyznę lustrzaną Edit Fillet - Edit Fillet + Edycja funkcji zaokrąglenia Edit Chamfer - Edit Chamfer + Edycja funkcji sfazowania @@ -5988,22 +5999,22 @@ Continue? Attachment Editor - Attachment Editor + Edytor dołączania Appearance per Face - Appearance per Face + Wygląd dla ściany Edit Projection - Edit Projection + Edycja rzutu Show Control Points - Show Control Points + Pokaż punkty kontrolne @@ -6031,12 +6042,12 @@ Continue? Part Tools - Part Tools + Narzędzia środowiska Część Boolean Tools - Boolean Tools + Narzędzia operacji logicznych @@ -6095,7 +6106,7 @@ Continue? Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6143,7 +6154,7 @@ Continue? Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6186,16 +6197,16 @@ Jeśli wybrany zostanie tylko jeden kształt złożony, jego części składowe area, or length, or by choosing specific items. If a second object is selected, it will be used as reference, for example, for collision or distance filtering. - Filters out objects from the selected compound by characteristics like volume, -area, or length, or by choosing specific items. -If a second object is selected, it will be used as reference, for example, -for collision or distance filtering. + Filtruje obiekty z wybranego złożenia według cech takich jak objętość, powierzchnia lub długość +albo poprzez wybranie konkretnych elementów. +Jeśli wybrany zostanie drugi obiekt, zostanie on użyty jako punkt odniesienia, +na przykład do filtrowania kolizji lub odległości. Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6213,12 +6224,13 @@ for collision or distance filtering. Explode Compound - Explode Compound + Rozbij kształt złożony Splits up a compound of shapes into separate objects, creating a compound filter for each shape - Splits up a compound of shapes into separate objects, creating a compound filter for each shape + Rozdziela obiekt złożony składający się z wielu kształtów na osobne obiekty, +tworząc oddzielny filtr złożony dla każdego kształtu. @@ -6228,7 +6240,7 @@ for collision or distance filtering. Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6251,7 +6263,9 @@ for collision or distance filtering. {} is not attachable. The attachment editor can still be used to align the object, but the attachment will not be parametric. - {} is not attachable. The attachment editor can still be used to align the object, but the attachment will not be parametric. + {} nie może zostać dołączony. +Edytor dołączania nadal może być użyty do wyrównania obiektu, jednak samo dołączenie nie będzie parametryczne. + @@ -6303,7 +6317,7 @@ for collision or distance filtering. Selecting… - Selecting… + Wybieranie … @@ -6466,9 +6480,8 @@ for collision or distance filtering. Performs an 'exclusive OR' boolean operation with two or more selected objects, or with the shapes inside a compound. Overlapping volumes of the shapes will be removed. - Performs an 'exclusive OR' boolean operation with two or more selected objects, -or with the shapes inside a compound. -Overlapping volumes of the shapes will be removed. + Wykonuje operację logiczną "exclusive OR" na dwóch lub więcej wybranych obiektach lub na kształtach znajdujących się w obiekcie złożonym. +Zachodzące na siebie części kształtów zostaną usunięte. @@ -6486,12 +6499,12 @@ Overlapping volumes of the shapes will be removed. X factor - X factor + Współczynnik X Z factor - Z factor + Współczynnik Z @@ -6506,22 +6519,22 @@ Overlapping volumes of the shapes will be removed. Y factor - Y factor + Współczynnik Y Specify a different scale factor for each cardinal direction - Specify a different scale factor for each cardinal direction + Określ indywidualny współczynnik skalowania dla każdego głównego kierunku Non-uniform scaling - Non-uniform scaling + Skalowanie nierównomierne Select shapes to be scaled - Select shapes to be scaled + Wybierz kształty do przeskalowania @@ -6543,7 +6556,7 @@ Overlapping volumes of the shapes will be removed. Creating scale failed. %1 - Creating scale failed. + Operacja skalowania nie powiodła się. %1 @@ -6562,7 +6575,7 @@ Overlapping volumes of the shapes will be removed. Scales the selected shape - Scales the selected shape + Wykonuje transformację skali wybranego kształtu @@ -6599,7 +6612,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Supports making planar faces with holes with islands in them - Supports making planar faces with holes with islands in them + Umożliwia tworzenie płaskich powierzchni z otworami, w których znajdują się wyspy. @@ -6612,7 +6625,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Supports making planar faces with holes, but no islands inside holes - Supports making planar faces with holes, but no islands inside holes + Umożliwia tworzenie płaskich powierzchni z otworami, bez wysp wewnątrz otworów. @@ -6633,12 +6646,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Appearance per Face - Appearance per Face + Wygląd dla ściany Select the faces in the 3D view - Select the faces in the 3D view + Wybierz ściany w oknie widoku 3D @@ -6653,7 +6666,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Custom appearance - Custom appearance + Wygląd użytkownika @@ -6663,17 +6676,17 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Set to Default - Set to Default + Ustaw jako domyślny Allows the selection of multiple faces by dragging a rectangle in the 3D view - Allows the selection of multiple faces by dragging a rectangle in the 3D view + Pozwala na zaznaczanie wielu ścian poprzez przeciągnięcie prostokąta w widoku 3D. Box Selection - Box Selection + Zaznacz obszarem @@ -6691,7 +6704,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6709,12 +6722,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Creates a parametric copy of the selected object with all contained tolerances set to at least a certain minimum value - Creates a parametric copy of the selected object with all contained tolerances set to at least a certain minimum value + Tworzy parametryczną kopię wybranego obiektu, ustawiając wszystkie zawarte tolerancje na co najmniej określoną wartość minimalną. Bad Selection - Bad Selection + Nieprawidłowy wybór @@ -6737,7 +6750,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Creates a coordinate system that can be attached to other objects - Creates a coordinate system that can be attached to other objects + Tworzy układ współrzędnych, który może być dołączony do innych obiektów @@ -6755,7 +6768,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Creates a datum object (coordinate system, plane, line, or point) that can be attached to other objects - Creates a datum object (coordinate system, plane, line, or point) that can be attached to other objects + Tworzy obiekt odniesienia (układ współrzędnych, płaszczyzna, linia lub punkt), który może być dołączony do innych obiektów @@ -6776,12 +6789,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Datum Plane - Datum Plane + Płaszczyzna odniesienia Creates a datum plane that can be attached to other objects - Creates a datum plane that can be attached to other objects + Tworzy płaszczyznę odniesienia, która może być dołączona do innych obiektów @@ -6794,12 +6807,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Datum Line - Datum Line + Linia odniesienia Creates a datum line that can be attached to other objects - Creates a datum line that can be attached to other objects + Tworzy linię odniesienia, która może być dołączona do innych obiektów @@ -6812,12 +6825,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Datum Point - Datum Point + Punkt odniesienia Creates a datum point that can be attached to other objects - Creates a datum point that can be attached to other objects + Tworzy punkt odniesienia, który może być dołączony do innych obiektów @@ -6830,7 +6843,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Opens the attachment editor to change the attachment of the selected object - Opens the attachment editor to change the attachment of the selected object + Otwiera edytor dołączania, aby zmienić powiązanie wybranego obiektu. @@ -6838,12 +6851,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Connect Shapes - Connect Shapes + Połącz kształty Fuses shapes, taking care to preserve voids - Fuses shapes, taking care to preserve voids + Łączy obiekty, dbając o zachowanie pustych przestrzeni @@ -6851,12 +6864,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Embed Shapes - Embed Shapes + Osadź kształty Fuses one shape into another, taking care to preserve voids - Fuses one shape into another, taking care to preserve voids + Przełącza jeden kształt do innych, dbając o zachowanie pustych przestrzeni @@ -6864,12 +6877,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Cutout Shape - Cutout Shape + Wycinanie kształtu Creates a cutout in the selected shape to fit another shape - Creates a cutout in the selected shape to fit another shape + Tworzy wycięcie w wybranym kształcie, aby dopasować do niego inny kształt. @@ -6877,12 +6890,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Boolean Fragments - Boolean Fragments + Fragmentacja funkcją logiczną Creates a boolean union which is sliced at the intersections of the selected shapes - Creates a boolean union which is sliced at the intersections of the selected shapes + Tworzy sumę logiczną, docinaną w przecięciach wybranych kształtów. @@ -6890,12 +6903,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Slice to Compound - Slice to Compound + Rozbij na kształty złożone Slices the selected object by using other objects as cutting tools and storing the results in one compound - Slices the selected object by using other objects as cutting tools and storing the results in one compound + Rozciąga wybrany obiekt za pomocą innych obiektów jako narzędzia cięcia i przechowuje wyniki w jednym złożeniu @@ -6903,12 +6916,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Slice Apart - Slice Apart + Rozbij Slices the selected object by other objects, and splits it apart, creating a compound filter for each slide - Slices the selected object by other objects, and splits it apart, creating a compound filter for each slide + Kroi wybrany obiekt przy użyciu innych obiektów i dzieli go na części, tworząc oddzielny filtr złożony dla każdej wyciętej części. @@ -6916,7 +6929,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Box Definition - Box Definition + Definicja prostopadłościanu @@ -6969,17 +6982,17 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Shape From Mesh - Shape From Mesh + Kształt z siatki Sew Shape - Sew Shape + Zszyj kształt Tolerance for sewing the shape - Tolerance for sewing the shape + Tolerancja scalania kształtu @@ -6987,12 +7000,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Ring facemaker - Ring facemaker + Kreator powierzchni pierścieniowych Supports making planar faces with holes and holes as faces - Supports making planar faces with holes and holes as faces + Umożliwia tworzenie płaskich powierzchni z otworami oraz traktowanie otworów jako osobnych powierzchni @@ -7000,12 +7013,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Persiste&nt Section Cut - Persiste&nt Section Cut + Wyci&nek przekroju Creates a new object as a boolean intersection of all visible shapes and the selected axis planes - Creates a new object as a boolean intersection of all visible shapes and the selected axis planes + Tworzy nowy obiekt jako część wspólną (operację logiczną) wszystkich widocznych kształtów oraz wybranych płaszczyzn osiowych @@ -7013,12 +7026,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Selection Filter - Selection Filter + Filtr wyboru Changes the selection filter - Changes the selection filter + Zmienia filtr wyboru @@ -7026,12 +7039,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Vertex Selection - Vertex Selection + Wybór wierzchołka Only allows the selection of vertices - Only allows the selection of vertices + Zezwala tylko na wybór wierzchołków @@ -7039,12 +7052,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Edge Selection - Edge Selection + Wybór krawędzi Only allows the selection of edges - Only allows the selection of edges + Zezwala tylko na wybór krawędzi @@ -7052,12 +7065,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Face Selection - Face Selection + Wybór ściany Only allows the selection of faces - Only allows the selection of faces + Zezwala tylko na wybór ścian @@ -7065,12 +7078,12 @@ Polilinie mogą znajdować się na różnych płaszczyznach. No Selection Filters - No Selection Filters + Brak filtrów zaznaczenia Clears all selection filters - Clears all selection filters + Czyści wszystkie wybrane filtry @@ -7078,7 +7091,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Do not show this dialog again - Do not show this dialog again + Nie pokazuj ponownie tego okna dialogowego @@ -7086,7 +7099,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Do not show this dialog again - Do not show this dialog again + Nie pokazuj ponownie tego okna dialogowego @@ -7099,7 +7112,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Reverse the direction of the pattern. - Reverse the direction of the pattern. + Odwróć kierunek wzorca. @@ -7125,7 +7138,7 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Add spacing to create spacing patterns. - Add spacing to create spacing patterns. + Dodaj odstępy, aby utworzyć wzorce odstępów. @@ -7141,20 +7154,21 @@ Polilinie mogą znajdować się na różnych płaszczyznach. Spacing %1 - Spacing %1 + Odstęp %1 Remove this spacing definition. - Remove this spacing definition. + Usuń tę definicję odstępów. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. - Failure while rendering preview: %1. That usually indicates an error with model. + Błąd podczas renderowania podglądu: %1. +Zazwyczaj oznacza to błąd modelu. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 098b54d8ba..93c1d09788 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -2221,7 +2221,7 @@ of the projection. Converter malha - + Edit attachment Editar anexo @@ -4082,22 +4082,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4111,19 +4126,8 @@ Check one or more edge entities first. Preview Pré-visualização - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4843,11 +4847,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4857,15 +4856,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4914,82 +4918,82 @@ of the object being attached. Inverter os lados - + OCC error: %1 Erro OCC: %1 - + unknown error erro desconhecido - + Attachment mode failed: %1 Modo de fixação falhou: %1 - + Not attached Não fixado - + Attached with mode %1 Fixado com o modo %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Face - + Edge Aresta - + Vertex Vértice - + Reference%1 Referência%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Não é editável, porque a rotação do anexo deslocado foi definida por expressões. - + Reference combinations: Combinações de referência: - + %1 (add %2) %1 (adicione %2) - + %1 (add more references) %1 (adicione mais referências) @@ -5288,12 +5292,12 @@ Verificações de operações booleanas individuais: PartGui::TaskDlgAttacher - + Attachment Fixação - + Datum dialog: input error Datum dialog: input error @@ -5517,23 +5521,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Espessura - + Select faces of the source object and press 'Done' Selecione as faces do objeto de origem e pressione 'Feito' - + Done Feito - + Input error Erro de entrada @@ -5629,8 +5633,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Nenhuma referência selecionada @@ -7126,7 +7130,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index c573fcf697..03b9f71925 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -2221,7 +2221,7 @@ of the projection. Convertește plasa - + Edit attachment Editare atașament @@ -4085,22 +4085,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4114,19 +4129,8 @@ Check one or more edge entities first. Preview Previzualizare - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4849,11 +4853,6 @@ doar comenzile create vor fi vizibile Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4863,15 +4862,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4920,82 +4924,82 @@ of the object being attached. Întoarce fața - + OCC error: %1 OCC eroare: %1 - + unknown error eroare necunoscută - + Attachment mode failed: %1 Modul de atașare a eșuat: %1 - + Not attached Ne e atașat - + Attached with mode %1 Ataşat cu modul %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Faţă - + Edge Margine - + Vertex Vârf - + Reference%1 Referinţă%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nu este editabil pentru că rotaţia de AttachmentOffset este legată de expresii. - + Reference combinations: Combinaţii de referinţă: - + %1 (add %2) %1 (a se adăuga %2) - + %1 (add more references) %1 (a se adăuga mai multe referinte) @@ -5297,12 +5301,12 @@ Operarea testului boolean individual: PartGui::TaskDlgAttacher - + Attachment Ataşament - + Datum dialog: input error Datum dialog: input error @@ -5526,23 +5530,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Grosime - + Select faces of the source object and press 'Done' Selecteaza fetele obiectului sursa si apasati "Gata" - + Done Gata - + Input error Eroare de intrare @@ -5638,8 +5642,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Nicio referință selecționată @@ -7135,7 +7139,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index c84724e5ac..e466cf11c9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -2221,7 +2221,7 @@ of the projection. Конвертировать сетку - + Edit attachment Изменить вложение @@ -3534,14 +3534,14 @@ Check one or more edge entities first. Radius 1 - Радиус 1 + Радиус колеса 1 Radius 2 - Радиус 2 + Радиус колеса 2 @@ -4088,22 +4088,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Экспериментальная - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4117,19 +4132,8 @@ Check one or more edge entities first. Preview Предварительный просмотр - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4851,11 +4855,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4865,15 +4864,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4922,82 +4926,82 @@ of the object being attached. Поменять стороны - + OCC error: %1 Ошибка openCASCADE: %1 - + unknown error неизвестная ошибка - + Attachment mode failed: %1 Ошибка режима присоединения: %1 - + Not attached Не присоединен - + Attached with mode %1 Присоединен в режиме %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Грань - + Edge Ребро - + Vertex Вершина - + Reference%1 Ориентир%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Неизменяемое, потому что вращательная часть положения присоединения ограничена уравнениями. - + Reference combinations: Комбинации ориентиров: - + %1 (add %2) %1 (и %2) - + %1 (add more references) %1 (и более ориентиров) @@ -5298,12 +5302,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Вложение - + Datum dialog: input error Datum dialog: input error @@ -5527,23 +5531,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Толщина - + Select faces of the source object and press 'Done' Выберите поверхность исходного объекта и нажмите "Продолжить" - + Done Готово - + Input error Ошибка ввода @@ -5639,8 +5643,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Не выбрано ни одного ориентира @@ -7136,7 +7140,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 90da91205e..06377f4f02 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -2221,7 +2221,7 @@ of the projection. Pretvori ploskovje - + Edit attachment Uredi pripetek @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Predogled - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ bodo prikazane le prerezne ploskve Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Obrni stranice - + OCC error: %1 OCC napaka: %1 - + unknown error neznana napaka - + Attachment mode failed: %1 Napaka v načinu pripetka: %1 - + Not attached Ni pripeto - + Attached with mode %1 Pripeto v načinu %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Ploskev - + Edge Rob - + Vertex Oglišče - + Reference%1 Sklic%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Neuredljivo, ker je sukanje Odmika pripetka omejeno z izrazi. - + Reference combinations: Kombinacije sklicev: - + %1 (add %2) %1 (dodaj%2) - + %1 (add more references) %1 (dodaj več sklicev) @@ -5302,12 +5306,12 @@ Preverjanja posamezne logične operacije: PartGui::TaskDlgAttacher - + Attachment Pripetek - + Datum dialog: input error Datum dialog: input error @@ -5531,23 +5535,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Debelina - + Select faces of the source object and press 'Done' Izberite ploskve izvornega objekta in pritisnite 'Končano' - + Done Končano - + Input error Napaka vnosa @@ -5643,8 +5647,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Noben sklic ni izbran @@ -7140,7 +7144,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts index 720d9613e3..b7008664d6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts @@ -2221,7 +2221,7 @@ projekcije. Pretvori mrežu - + Edit attachment Uredi pridruživanje @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Pregled - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4852,11 +4856,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4866,15 +4865,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4923,82 +4927,82 @@ of the object being attached. Obrni strane - + OCC error: %1 OCC greška: %1 - + unknown error nepoznata greška - + Attachment mode failed: %1 Režim pridruživanja nije uspeo: %1 - + Not attached Nije pridruženo - + Attached with mode %1 Attached with mode %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Stranica - + Edge Ivica - + Vertex Teme - + Reference%1 Referenca%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Nije moguće uređivati jer je roracija AttachmentOffset vezana izrazima. - + Reference combinations: Kombinacije referenci: - + %1 (add %2) %1 (dodaj %2) - + %1 (add more references) %1 (dodaj više referenci) @@ -5300,12 +5304,12 @@ Provera pojedinačnih bulovih operacija: PartGui::TaskDlgAttacher - + Attachment Pridruživanje - + Datum dialog: input error Datum dialog: input error @@ -5529,23 +5533,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Tankozidni objekat - + Select faces of the source object and press 'Done' Izaberi stranice izvornog objekta i pritisni 'Gotovo' - + Done Gotovo - + Input error Greška pri unosu @@ -5641,8 +5645,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Nije izabrana referenca @@ -7138,7 +7142,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index 7ac8b96cce..d7c99689b9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -2221,7 +2221,7 @@ of the projection. Претвори мрежу - + Edit attachment Уреди придруживање @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Преглед - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4852,11 +4856,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4866,15 +4865,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4923,82 +4927,82 @@ of the object being attached. Обрни стране - + OCC error: %1 OCC грешка: %1 - + unknown error непозната грешка - + Attachment mode failed: %1 Режим придруживања није успео: %1 - + Not attached Није придружено - + Attached with mode %1 Attached with mode %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Страница - + Edge Ивица - + Vertex Теме - + Reference%1 Референца%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Није могуће уређивати јер је ротација AttachmentOffset везана изразима. - + Reference combinations: Комбинације референци: - + %1 (add %2) %1 (додај %2) - + %1 (add more references) %1 (додај више референци) @@ -5300,12 +5304,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Прилог - + Datum dialog: input error Datum dialog: input error @@ -5529,23 +5533,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Танкозидни објекат - + Select faces of the source object and press 'Done' Изабери странице изворног објекта и притисни 'Готово' - + Done Готово - + Input error Грешка приликом уноса @@ -5641,8 +5645,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Није изабрана референца @@ -7138,7 +7142,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 89ac273d2e..9c1fadc1cc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -2221,7 +2221,7 @@ of the projection. Konvertera nät - + Edit attachment Redigera bifogad fil @@ -4089,22 +4089,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimentell - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4118,19 +4133,8 @@ Check one or more edge entities first. Preview Förhandsvisning - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4853,11 +4857,6 @@ kommer endast skapade snitt att vara synliga Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4867,15 +4866,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4924,82 +4928,82 @@ of the object being attached. Vänd sidor - + OCC error: %1 OCC-fel: %1 - + unknown error okänt fel - + Attachment mode failed: %1 Kopplingsläge misslyckades: %1 - + Not attached Inte kopplad - + Attached with mode %1 Kopplad med läge %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Yta - + Edge Kant - + Vertex Hörn - + Reference%1 Referens%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Ej redigerbar eftersom rotationen av AttachmentOffset är bunden av uttryck. - + Reference combinations: Referenskombinationer: - + %1 (add %2) %1 (lägg till %2) - + %1 (add more references) %1 (lägg till fler referenser) @@ -5300,12 +5304,12 @@ Individuella booleska operationskontroller: PartGui::TaskDlgAttacher - + Attachment Koppling - + Datum dialog: input error Datum dialog: input error @@ -5529,23 +5533,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Tjocklek - + Select faces of the source object and press 'Done' Markera ytorna i källobjektet och tryck på "Klar" - + Done Färdig - + Input error Inmatningsfel @@ -5641,8 +5645,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Ingen referens markerad @@ -7138,7 +7142,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 1259816fc7..5e5437e9d8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -2221,7 +2221,7 @@ of the projection. Metal örgüyü dönüştür - + Edit attachment Ek dosyayı düzenle @@ -4086,22 +4086,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental Experimental - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4115,19 +4130,8 @@ Check one or more edge entities first. Preview Önizleme - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4850,11 +4854,6 @@ yalnızca oluşturulan kesimler görünür Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4864,15 +4863,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4921,82 +4925,82 @@ of the object being attached. Yönlerini çevirin - + OCC error: %1 OCC hatası: %1 - + unknown error bilinmeyen hata - + Attachment mode failed: %1 Ek modu başarısız: %1 - + Not attached Ekli değil - + Attached with mode %1 %1 modu ile ekli - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Yüz - + Edge Kenar - + Vertex Vertex - + Reference%1 Referans%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. AttachmentOffset'in döndürülmesi ifadelere bağlı olduğundan düzenlenemez. - + Reference combinations: Referans kombinasyonları: - + %1 (add %2) %1 (%2 ekle) - + %1 (add more references) %1 (daha fazla referans ekleyin) @@ -5295,12 +5299,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Eklenti - + Datum dialog: input error Datum dialog: input error @@ -5524,23 +5528,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Kalınlık - + Select faces of the source object and press 'Done' Kaynak nesnenin yüzlerini seçin ve 'Tamamlandı' tuşuna basın - + Done Bitti - + Input error Girdi hatası @@ -5636,8 +5640,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Seçilen referans yok @@ -7133,7 +7137,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index 269aa81b1e..85b7af5ced 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -2221,7 +2221,7 @@ of the projection. Перетворення сітки - + Edit attachment Редагувати приєднання @@ -2361,17 +2361,17 @@ Note: The placement is expressed in local space of object being attached. In X-direction - In X-direction + У напрямку осі X In Y-direction - In Y-direction + У напрямку осі Y In Z-direction - In Z-direction + У напрямку осі Z @@ -3870,17 +3870,17 @@ Check one or more edge entities first. X-Direction - X-Direction + Напрямок по осі X Y-Direction - Y-Direction + Напрямок по осі Y Z-Direction - Z-Direction + Напрямок по осі Z @@ -4090,24 +4090,39 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental - Experimental + Експериментальний - + These settings are experimental and may result in decreased stability, problems and undefined behaviors - These settings are experimental and may result in decreased stability, problems and undefined behaviors + Ці налаштування є експериментальними і можуть призвести до зменшення стабільності, проблем та невизначеної поведінки - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging - Disable recompute while dragging + Вимкнути переобчислення під час перетягування @@ -4119,19 +4134,8 @@ Check one or more edge entities first. Preview Попередній перегляд - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4854,11 +4858,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4868,15 +4867,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + У напрямку осі X + - In y-direction - In y-direction + In Y-direction + У напрямку осі Y - In z-direction - In z-direction + In Z-direction + У напрямку осі Z @@ -4925,82 +4929,82 @@ of the object being attached. Перевернути сторони - + OCC error: %1 Помилка OCC %1 - + unknown error невідома помилка - + Attachment mode failed: %1 Attachment mode failed: %1 - + Not attached Привʼязка відсутня - + Attached with mode %1 Режим приєднання: %1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face Грань - + Edge Ребро - + Vertex Вершина - + Reference%1 Орієнтир%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: Комбінації орієнтирів: - + %1 (add %2) %1 (додати %2) - + %1 (add more references) %1 (додати більше орієнтирів) @@ -5303,12 +5307,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment Приєднання - + Datum dialog: input error Datum dialog: input error @@ -5532,23 +5536,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness Товщина - + Select faces of the source object and press 'Done' Оберіть поверхні на вихідному об'єкті на нажміть "Готово" - + Done Готово - + Input error Помилка вводу @@ -5644,8 +5648,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected Не вибрано орієнтира @@ -7141,7 +7145,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index 739e2e86ed..393d420bfc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -2221,7 +2221,7 @@ of the projection. 转换网格 - + Edit attachment 编辑附加 @@ -4086,22 +4086,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental 试验性 - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4115,19 +4130,8 @@ Check one or more edge entities first. Preview 预览 - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4850,11 +4854,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4864,15 +4863,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4921,82 +4925,82 @@ of the object being attached. 翻转面 - + OCC error: %1 OCC 错误： %1 - + unknown error 未知错误。 - + Attachment mode failed: %1 附加模式失败: %1 - + Not attached 没附档 - + Attached with mode %1 附加模式%1 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face 面 - + Edge 边 - + Vertex 顶点 - + Reference%1 参照 %1 - + Not editable because rotation of AttachmentOffset is bound by expressions. Not editable because rotation of AttachmentOffset is bound by expressions. - + Reference combinations: 参照组合： - + %1 (add %2) %1 (添加 %2) - + %1 (add more references) %1 （添加更多参照） @@ -5296,12 +5300,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment 附件 - + Datum dialog: input error Datum dialog: input error @@ -5525,23 +5529,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness 厚度 - + Select faces of the source object and press 'Done' 选择源对象的面并按'完成' - + Done 完成 - + Input error 输入错误 @@ -5637,8 +5641,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected 没有参照被选中 @@ -7134,7 +7138,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 7daceebba5..e0de50a754 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -2221,7 +2221,7 @@ of the projection. 轉換網格 - + Edit attachment 編輯附件 @@ -4084,22 +4084,37 @@ Check one or more edge entities first. Switch to task panel when entering Part Design workbench - + + Show final result by default when editing features + Show final result by default when editing features + + + + Show transparent preview overlay by default when editing features + Show transparent preview overlay by default when editing features + + + + Highlight the profile used to create features + Highlight the profile used to create features + + + Experimental 實驗性功能 - + These settings are experimental and may result in decreased stability, problems and undefined behaviors These settings are experimental and may result in decreased stability, problems and undefined behaviors - - Show interactive draggers during Part Design tasks - Show interactive draggers during Part Design tasks + + Show interactive draggers when editing features + Show interactive draggers when editing features - + Disable recompute while dragging Disable recompute while dragging @@ -4113,19 +4128,8 @@ Check one or more edge entities first. Preview 預覽 - - - Show final result by default when editing feature - Show final result by default when editing feature - - - - Show transparent preview overlay by default when editing feature - Show transparent preview overlay by default when editing feature - - Allow multiple solids in Part Design bodies by default Allow multiple solids in Part Design bodies by default @@ -4842,11 +4846,6 @@ only created cuts will be visible Attachment Offset in its Local Coordinate System Attachment Offset in its Local Coordinate System - - - In x-direction - In x-direction - @@ -4856,15 +4855,20 @@ of the object being attached The offset is expressed in the local coordinate system of the object being attached + + + In X-direction + In X-direction + - In y-direction - In y-direction + In Y-direction + In Y-direction - In z-direction - In z-direction + In Z-direction + In Z-direction @@ -4913,82 +4917,82 @@ of the object being attached. 翻面 - + OCC error: %1 OCC 錯誤：%1 - + unknown error 未知錯誤 - + Attachment mode failed: %1 連接模式失敗：%1 - + Not attached 未連接任何物件 - + Attached with mode %1 以模式 %1 連接 - + Attachment offset (in its local coordinate system): Attachment offset (in its local coordinate system): - + Attachment offset (inactive - not attached): Attachment offset (inactive - not attached): - + Selecting… Selecting… - + Face 面 - + Edge 邊 - + Vertex 頂點 - + Reference%1 參考%1 - + Not editable because rotation of AttachmentOffset is bound by expressions. 因為AttachmentOffset的旋轉受到表達式的約束，所以無法編輯。 - + Reference combinations: 參考組合: - + %1 (add %2) %1(加 %2) - + %1 (add more references) %1 (加更多參考) @@ -5283,12 +5287,12 @@ Individual boolean operation checks: PartGui::TaskDlgAttacher - + Attachment 附件 - + Datum dialog: input error Datum dialog: input error @@ -5512,23 +5516,23 @@ in the 3D view for the sweep path. PartGui::ThicknessWidget - - + + Thickness 厚度 - + Select faces of the source object and press 'Done' 選擇來源物件之面並按下'結束' - + Done 完成 - + Input error 輸入錯誤 @@ -5624,8 +5628,8 @@ Continue? Select either 2 edges or 2 wires. - - + + No reference selected 尚未選擇參考之物件 @@ -7121,7 +7125,7 @@ Overlapping volumes of the shapes will be removed. PartGui::ViewProviderPreviewExtension - + Failure while rendering preview: %1. That usually indicates an error with model. Failure while rendering preview: %1. That usually indicates an error with model. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index e213c049f3..4214511023 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -904,18 +904,18 @@ so that self intersection is avoided. - + Sketch on Face - + Make copy - - + + New Sketch @@ -1571,17 +1571,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list - + The body list cannot be empty - + Boolean: Accept: Input error @@ -1691,13 +1691,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected - + Face @@ -1707,63 +1707,63 @@ If zero, it is equal to Radius2 - + Preview - + Select Faces - + Select reference… - + No shape selected - + Sketch normal - + Face normal - - + + Custom direction - + Click on a shape in the model - + One sided - + Two sided - + Symmetric - + Click on a face in the model @@ -3171,50 +3171,49 @@ measured along the specified direction - + Several sub-elements selected - + Select a single face as support for a sketch! - + Select a face as support for a sketch! - + Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on - + No support face selected - + No planar support - + No valid planes in this document - + - A dialog is already open in the task panel @@ -3257,9 +3256,8 @@ measured along the specified direction - + - Close this dialog? @@ -3646,7 +3644,7 @@ Although you will be able to migrate any moment later with 'Part Design -&g - + Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts index 76c7c03810..2fc07bdb02 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts @@ -884,17 +884,17 @@ False = унутраная шасцярня Edit Shape Binder - Edit Shape Binder + Змяніць злучную фігуру Create Shape Binder - Create Shape Binder + Стварыць злучную фігуру Create Sub-Shape Binder - Create Sub-Shape Binder + Стварыць злучную ўкладзеную фігуру @@ -904,26 +904,26 @@ False = унутраная шасцярня Make Copy - Make Copy + Зрабіць копію Convert to Multi-Transform feature - Convert to Multi-Transform feature + Пераўтварыць элемент множнага пераўтварэння - + Sketch on Face - Sketch on Face + Эскіз у грань - + Make copy Зрабіць копію - - + + New Sketch Новы эскіз @@ -941,17 +941,17 @@ False = унутраная шасцярня Migrate legacy Part Design features to bodies - Migrate legacy Part Design features to bodies + Мігрыраваць элементы асаблівасцяў састарэлага праектавання дэталі ў цела Duplicate a Part Design object - Duplicate a Part Design object + Паўтарыць аб'ект праектавання дэталі Move a feature inside body - Move a feature inside body + Рухаць элемент унутры цела @@ -1009,12 +1009,12 @@ False = унутраная шасцярня Sketch belongs to another body feature - Sketch belongs to another body feature + Эскіз належыць да іншага элемента цела Feature is located after the tip of the body - Feature is located after the tip of the body + Элемент размешчаны пасля кончыка цела @@ -1027,27 +1027,27 @@ False = унутраная шасцярня Face Tools - Face Tools + Інструменты грані Edge Tools - Edge Tools + Інструменты рабра Boolean Tools - Boolean Tools + Лагічныя інструменты Helper Tools - Helper Tools + Дапаможныя інструменты Modeling Tools - Modeling Tools + Інструменты мадэлявання @@ -1060,27 +1060,27 @@ False = унутраная шасцярня Involute Parameter - Involute Parameter + Налада эвальвентнага зачаплення Number of teeth - Number of teeth + Колькасць зубцоў Module - Module + Модуль Pressure angle - Pressure angle + Вугал зачаплення High precision - High precision + Высокая дакладнасць @@ -1097,27 +1097,27 @@ False = унутраная шасцярня External gear - External gear + Вонкавая шасцярня Addendum coefficient - Addendum coefficient + Каэфіцыент вышыні галоўкі зуба зубчастага кола Dedendum coefficient - Dedendum coefficient + Каэфіцыент вышыні ножкі зуба зубчастага кола Root fillet coefficient - Root fillet coefficient + Каэфіцыент акруглення ў западзін зуба зубчатага кола Profile shift coefficient - Profile shift coefficient + Каэфіцыент зруху профілю @@ -1131,13 +1131,13 @@ False = унутраная шасцярня To create a new Part Design object, there must be an active body in the document. Select a body from below, or create a new body. - To create a new Part Design object, there must be an active body in the document. -Select a body from below, or create a new body. + Каб стварыць новы аб'ект праектавання дэталі, у дакуменце павінен быць бягучы аб'ект цела. +Абярыце цела з спісу ніжэй, альбо стварыце новае цела. Create New Body - Create New Body + Стварыць новае цела @@ -1228,12 +1228,12 @@ Select a body from below, or create a new body. U parameter - U parameter + Налада U V parameters - V parameters + Налады V @@ -1243,35 +1243,35 @@ Select a body from below, or create a new body. Radius in local X-direction - Radius in local X-direction + Радыус у лакальным напрамку восі X Radius 3 - Radius 3 + Радыус 3 Radius in local Y-direction If zero, it is equal to Radius2 - Radius in local Y-direction -If zero, it is equal to Radius2 + Радыус у лакальным напрамку восі Y +Калі 0, ён аднолькавы з Радыус2 V parameter - V parameter + Налада V Radius in local XY-plane - Radius in local XY-plane + Радыус у лакальнай плоскасці XY Radius in local XZ-plane - Radius in local XZ-plane + Радыус у лакальнай плоскасці XZ @@ -1283,32 +1283,32 @@ If zero, it is equal to Radius2 Circumradius - Circumradius + Радыус акружнасці X min/max - X min/max + X мін/макс Y min/max - Y min/max + Y мін/макс Z min/max - Z min/max + Z мін/макс X2 min/max - X2 min/max + X2 мін/макс Z2 min/max - Z2 min/max + Z2 мін/макс @@ -1318,7 +1318,7 @@ If zero, it is equal to Radius2 Coordinate system - Coordinate system + Сістэма каардынат @@ -1328,34 +1328,34 @@ If zero, it is equal to Radius2 Number of rotations - Number of rotations + Колькасць абаротаў Angle 1 - Angle 1 + Вугал 1 Angle 2 - Angle 2 + Вугал 2 From 3 Points - From 3 Points + З трох кропак Major radius - Major radius + Вялікая паўвось Minor radius - Minor radius + Малая паўвось @@ -1440,12 +1440,12 @@ If zero, it is equal to Radius2 Add Body - Add Body + Дадаць цела Remove Body - Remove Body + Выдаліць цела @@ -1465,7 +1465,7 @@ If zero, it is equal to Radius2 Boolean Parameters - Boolean Parameters + Налады лагічнай аперацыі @@ -1478,7 +1478,7 @@ If zero, it is equal to Radius2 Primitive Parameters - Primitive Parameters + Налады першаснага цела @@ -1513,7 +1513,7 @@ If zero, it is equal to Radius2 Toggles between selection and preview mode - Toggles between selection and preview mode + Пераключае паміж выбарам і рэжымам прагляду @@ -1550,12 +1550,12 @@ If zero, it is equal to Radius2 Flips the direction - Flips the direction + Паварочвае напрамак Use all edges - Use all edges + Ужыць усе рэбры @@ -1576,24 +1576,24 @@ If zero, it is equal to Radius2 Empty chamfer created! - Empty chamfer created! + Створана пустая фаска! PartDesignGui::TaskDlgBooleanParameters - + Empty body list Пусты спіс цел - + The body list cannot be empty Спіс цел не можа быць пустым - + Boolean: Accept: Input error Лагічная аперацыя: Прыняць: Памылка ўводу @@ -1603,7 +1603,7 @@ If zero, it is equal to Radius2 Incompatible Reference Set - Incompatible Reference Set + Несумяшчальны набор апорных элементаў @@ -1632,7 +1632,7 @@ If zero, it is equal to Radius2 Toggles between selection and preview mode - Toggles between selection and preview mode + Пераключае паміж выбарам і рэжымам прагляду @@ -1654,12 +1654,12 @@ If zero, it is equal to Radius2 Neutral Plane - Neutral Plane + Нейтральная плоскасць Pull Direction - Pull Direction + Напрамак выцягвання @@ -1670,7 +1670,7 @@ If zero, it is equal to Radius2 Empty draft created! - Empty draft created! + Створаны пусты чарнавік! @@ -1684,17 +1684,17 @@ If zero, it is equal to Radius2 Confirm Selection - Confirm Selection + Пацвердзіць выбар Add All Edges - Add All Edges + Дадаць усе рэбры Adds all edges to the list box (only when in add selection mode) - Adds all edges to the list box (only when in add selection mode) + Дадае ўсе рэбры ў спіс (толькі ў рэжыме дадання выбару) @@ -1705,13 +1705,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Грань не абраная - + Face Грань @@ -1721,63 +1721,63 @@ If zero, it is equal to Radius2 Выдаліць - + Preview Папярэдні выгляд - + Select Faces - Select Faces + Абраць грані - + Select reference… - Select reference… + Абраць апорны элемент… - + No shape selected Фігура не абраная - + Sketch normal Вектар нармалі эскізу - + Face normal Вектар нармалі грані - - + + Custom direction Адвольны напрамак - + Click on a shape in the model Пстрыкнуць па фігуры ў мадэлі - - - One sided - One sided - - Two sided - Two sided + One sided + Аднабаковы + Two sided + Двухбаковы + + + Symmetric Сіметрычна - + Click on a face in the model Пстрыкнуць па грані ў мадэлі @@ -1792,7 +1792,7 @@ If zero, it is equal to Radius2 Allow External Features - Allow External Features + Дазволіць вонкавыя элементы @@ -1862,7 +1862,7 @@ If zero, it is equal to Radius2 Feature is located after the tip of the body - Feature is located after the tip of the body + Элемент размешчаны пасля кончыка цела @@ -1875,7 +1875,7 @@ If zero, it is equal to Radius2 Toggles between selection and preview mode - Toggles between selection and preview mode + Пераключае паміж выбарам і рэжымам прагляду @@ -1897,7 +1897,7 @@ If zero, it is equal to Radius2 Use all edges - Use all edges + Ужыць усе рэбры @@ -1916,19 +1916,19 @@ If zero, it is equal to Radius2 Base X-axis - Base X-axis + Асноўная вось X Base Y-axis - Base Y-axis + Асноўная вось Y Base Z-axis - Base Z-axis + Асноўная вось Z @@ -1962,7 +1962,7 @@ If zero, it is equal to Radius2 Select reference… - Select reference… + Абраць апорны элемент… @@ -2002,22 +2002,22 @@ If zero, it is equal to Radius2 Turns - Turns + Віткі Cone angle - Cone angle + Вугал конусу Radial growth - Radial growth + Радыяльны прырост Recompute on change - Recompute on change + Пералічыць пры змене @@ -2037,7 +2037,7 @@ If zero, it is equal to Radius2 Helix Parameters - Helix Parameters + Налады спіралі @@ -2080,7 +2080,7 @@ If zero, it is equal to Radius2 Hole Parameters - Hole Parameters + Налады адтуліны @@ -2232,12 +2232,12 @@ If zero, it is equal to Radius2 Recompute on change - Recompute on change + Пералічыць пры змене Loft Parameters - Loft Parameters + Налады профілю @@ -2283,37 +2283,37 @@ If zero, it is equal to Radius2 Add Mirror Transformation - Add Mirror Transformation + Дадаць сіметрычнае пераўтварэнне Add Linear Pattern - Add Linear Pattern + Дадаць лінейны шаблон Add Polar Pattern - Add Polar Pattern + Дадаць палярны шаблон Add Scale Transformation - Add Scale Transformation + Дадаць маштабнае пераўтварэнне Move Up - Move Up + Рухаць уверх Move Down - Move Down + Рухаць уніз Right-click to add a transformation - Right-click to add a transformation + Пстрыкніце <правай кнопкай мышы>, каб дадаць пераўтварэнне @@ -2321,17 +2321,17 @@ If zero, it is equal to Radius2 Pad Parameters - Pad Parameters + Налады выцягвання Offset the pad from the face at which the pad will end on side 1 - Offset the pad from the face at which the pad will end on side 1 + Зрушыць выцягванне ад грані, на якой выцягванне будзе заканчвацца на баку 1 Offset the pad from the face at which the pad will end on side 2 - Offset the pad from the face at which the pad will end on side 2 + Зрушыць выцягванне ад грані, на якой выцягванне будзе заканчвацца на баку 2 @@ -2405,12 +2405,12 @@ If zero, it is equal to Radius2 Select Face - Select Face + Абраць грань Side 2 - Side 2 + Бок 2 @@ -2462,7 +2462,7 @@ measured along the specified direction Toggles between selection and preview mode - Toggles between selection and preview mode + Пераключае паміж выбарам і рэжымам прагляду @@ -2472,12 +2472,12 @@ measured along the specified direction Direction/edge - Direction/edge + Напрамак/рабро Select reference… - Select reference… + Абраць апорны элемент… @@ -2487,7 +2487,7 @@ measured along the specified direction X-component of direction vector - X-component of direction vector + Кампанента X вектара напрамку @@ -2497,7 +2497,7 @@ measured along the specified direction Y-component of direction vector - Y-component of direction vector + Кампанента Y вектара напрамку @@ -2507,7 +2507,7 @@ measured along the specified direction Z-component of direction vector - Z-component of direction vector + Кампанента Z вектара напрамку @@ -2523,7 +2523,7 @@ measured along the specified direction Side 1 - Side 1 + Бок 1 @@ -2535,18 +2535,18 @@ measured along the specified direction Select Shape - Select Shape + Абраць фігуру Selects all faces of the shape - Selects all faces of the shape + Абірае ўсе грані фігуры Recompute on change - Recompute on change + Пералічыць пры змене @@ -2629,7 +2629,7 @@ measured along the specified direction Section Orientation - Section Orientation + Арыентацыя перасеку @@ -2653,22 +2653,22 @@ measured along the specified direction Corner transition - Corner transition + Пераход кута Right corner - Right corner + Правы кут Round corner - Round corner + Закруглены кут Path to Sweep Along - Path to Sweep Along + Траекторыя да выцягвання @@ -2678,7 +2678,7 @@ measured along the specified direction Remove edge - Remove edge + Выдаліць рабро @@ -2688,7 +2688,7 @@ measured along the specified direction Pipe Parameters - Pipe Parameters + Налады траекторыі @@ -2742,7 +2742,7 @@ measured along the specified direction Section Transformation - Section Transformation + Пераўтварэнне перасеку @@ -2755,17 +2755,17 @@ measured along the specified direction Pocket Parameters - Pocket Parameters + Налады кішэні Offset from the selected face at which the pocket will end on side 1 - Offset from the selected face at which the pocket will end on side 1 + Зрушэнне ад абранай мяжы, на якой кішэня будзе заканчвацца на баку 1 Offset from the selected face at which the pocket will end on side 2 - Offset from the selected face at which the pocket will end on side 2 + Зрушэнне ад абранай мяжы, на якой кішэня будзе заканчвацца на баку 2 @@ -2815,19 +2815,19 @@ measured along the specified direction Base X-axis - Base X-axis + Асноўная вось X Base Y-axis - Base Y-axis + Асноўная вось Y Base Z-axis - Base Z-axis + Асноўная вось Z @@ -2863,7 +2863,7 @@ measured along the specified direction Select reference… - Select reference… + Абраць апорны элемент… @@ -2880,7 +2880,7 @@ measured along the specified direction Recompute on change - Recompute on change + Пералічыць пры змене @@ -2946,7 +2946,7 @@ measured along the specified direction Shape Binder Parameters - Shape Binder Parameters + Налады злучанй фігуры @@ -2967,7 +2967,7 @@ measured along the specified direction Toggles between selection and preview mode - Toggles between selection and preview mode + Пераключае паміж выбарам і рэжымам прагляду @@ -3004,7 +3004,7 @@ measured along the specified direction Recto verso - Recto verso + Абодва бакі @@ -3031,7 +3031,7 @@ measured along the specified direction Empty thickness created! - Empty thickness created! + Створана пустая таўшчыня! @@ -3066,38 +3066,38 @@ measured along the specified direction Base X-axis - Base X-axis + Асноўная вось X Base Y-axis - Base Y-axis + Асноўная вось Y Base Z-axis - Base Z-axis + Асноўная вось Z Base XY-plane - Base XY-plane + Асноўная плоскасць XY Base YZ-plane - Base YZ-plane + Асноўная плоскасць YZ Base XZ-plane - Base XZ-plane + Асноўная плоскасць XZ Select reference… - Select reference… + Абраць апорны элемент… @@ -3112,17 +3112,17 @@ measured along the specified direction Add Feature - Add Feature + Дадаць элемент Remove Feature - Remove Feature + Выдаліць элемент Recompute on change - Recompute on change + Пералічыць пры змене @@ -3135,7 +3135,7 @@ measured along the specified direction Select Body - Select Body + Абраць цела @@ -3158,12 +3158,12 @@ measured along the specified direction Move Tip - Move Tip + Рухаць кончык Set tip to last feature? - Set tip to last feature? + Ці задаць падказку на апошні элемент? @@ -3191,50 +3191,49 @@ measured along the specified direction Памылка - + Several sub-elements selected Некалькі абраных укладзеных элементаў - + Select a single face as support for a sketch! - Select a single face as support for a sketch! + Абраць адну грань у якасці падтрымкі для эскізу! - + Select a face as support for a sketch! - Select a face as support for a sketch! + Абраць грань у якасці падтрымкі для эскізу! - + Need a planar face as support for a sketch! - Need a planar face as support for a sketch! + Патрэбна абраць плоскую грань у якасці падтрымкі для эскізу! - + Create a plane first or select a face to sketch on - Create a plane first or select a face to sketch on + Стварыць плоскасць, альбо абраць грань на эскізе - + No support face selected Не абрана грань падтрымкі - + No planar support Адсутнічае плоская падтрымка - + No valid planes in this document У дакуменце дапушчальныя плоскасці адсутнічаюць - + - A dialog is already open in the task panel @@ -3258,12 +3257,13 @@ measured along the specified direction There is no active body. Please activate a body before inserting a datum entity. - There is no active body. Please activate a body before inserting a datum entity. + Бягучага цела адсутнічае. +Актывуйце цела перад устаўкай апорнага аб'екта. Sub-shape binder - Sub-shape binder + Злучнае рэчыва ўкладзенай фігуры @@ -3277,13 +3277,12 @@ measured along the specified direction - + - Close this dialog? - Close this dialog? + Ці зачыніць дыялогавае акно? @@ -3300,12 +3299,12 @@ measured along the specified direction Selection is not in the active body - Selection is not in the active body + Выбар не знаходзіцца ў бягучы целе Shape of the selected part is empty - Shape of the selected part is empty + Фігура абранай дэталі пустая @@ -3315,7 +3314,7 @@ measured along the specified direction Consider using a shape binder or a base feature to reference external geometry in a body - Consider using a shape binder or a base feature to reference external geometry in a body + Разглядзіце магчымасць ужыць злучную фігуру ці асноўны элемент для спасылкі на вонкавую геаметрыю ў целе @@ -3353,12 +3352,12 @@ measured along the specified direction A body cannot be based on a Part Design feature. - A body cannot be based on a Part Design feature. + Цела не можа быць заснавана на элеменце праектаванне дэталі. %1 already belongs to a body and cannot be used as a base feature for another body. - %1 already belongs to a body and cannot be used as a base feature for another body. + %1 ужо належыць да цела, і не можа ўжывацца як асноўны элемент для іншага цела. @@ -3416,17 +3415,17 @@ This may lead to unexpected results. Select exactly one Part Design feature or a body. - Select exactly one Part Design feature or a body. + Абраць толькі адзін элемент праектавання дэталі ці цела. Could not determine a body for the selected feature '%s'. - Could not determine a body for the selected feature '%s'. + Не атрымалася вызначыць цела для абранага аб'екта '%s'. Only features of a single source body can be moved - Only features of a single source body can be moved + Можна рухаць толькі элементы з аднаго зыходнага цела @@ -3436,7 +3435,7 @@ This may lead to unexpected results. No Part Design features without body found Nothing to migrate. - No Part Design features without body found Nothing to migrate. + Не знойдзена ніводнай элемента праектавання дэталі без цела, якую можна было б перанесці. @@ -3545,14 +3544,16 @@ This may lead to unexpected results. To use Part Design, an active body is required in the document. Activate a body (double-click) or create a new one. For legacy documents with Part Design objects lacking a body, use the migrate function in Part Design to place them into a body. - To use Part Design, an active body is required in the document. Activate a body (double-click) or create a new one. + Каб ужываць праектаванне дэталі, у дакуменце павінна быць бягучае цела. +Актывуйце цела (падвоеная пстрычка) ці стварыце новае цела. -For legacy documents with Part Design objects lacking a body, use the migrate function in Part Design to place them into a body. +Для састарэлых дакументаў, у якіх аб'екты праектавання дэталі не маюць асноўнай часткі, ужывайце функцыю пераносу ў праектаванне дэталі, каб змясціць іх у цела. To create a new Part Design object, an active body is required in the document. Activate an existing body (double-click) or create a new one. - To create a new Part Design object, an active body is required in the document. Activate an existing body (double-click) or create a new one. + Для стварэння новага аб'екта праектавання дэталі ў дакуменце патрабуецца бягучае цела. +Актывуйце існае цела (падвоеная пстрычка) ці стварыце новае цела. @@ -3585,7 +3586,7 @@ For legacy documents with Part Design objects lacking a body, use the migrate fu Set Face Colors - Set Face Colors + Задаць колер грані @@ -3613,7 +3614,7 @@ For legacy documents with Part Design objects lacking a body, use the migrate fu Edit Datum - Edit Datum + Змяніць кропку адліку @@ -3624,13 +3625,13 @@ For legacy documents with Part Design objects lacking a body, use the migrate fu %1 misses a base feature. This feature is broken and cannot be edited. - %1 misses a base feature. -This feature is broken and cannot be edited. + %1 не мае асноўнага элементу. +Элемент не працуе, і не можа быць зменены. Edit Shape Binder - Edit Shape Binder + Змяніць злучную фігуру @@ -3640,27 +3641,27 @@ This feature is broken and cannot be edited. Select Bound Object - Select Bound Object + Абраць звязаны аб'ект The document "%1" you are editing was designed with an old version of Part Design workbench. - The document "%1" you are editing was designed with an old version of Part Design workbench. + Дакумент "%1", які вы мяняеце, быў спраектаваны з ужываннем старой версіі варштата праектавання дэталі. Migrate in order to use modern Part Design features? - Migrate in order to use modern Part Design features? + Ці мігрыраваць, каб ужыць сучасныя асаблівасці праектавання дэталі? The document "%1" seems to be either in the middle of the migration process from legacy Part Design or have a slightly broken structure. - The document "%1" seems to be either in the middle of the migration process from legacy Part Design or have a slightly broken structure. + Дакумент "%1", відаць, знаходзіцца ў сярэдзіне працэсу міграцыі з састарэлага праектавання дэталі, альбо мае злёгку парушаную структуру. Make the migration automatically? - Make the migration automatically? + Ці выканаць міграцыю аўтаматычна? @@ -3674,52 +3675,52 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - Migrate Manually + Мігрыраваць уручную - + Edit Boolean - Edit Boolean + Змяніць лагічную аперацыю Edit Chamfer - Edit Chamfer + Змяніць фаску Edit Draft - Edit Draft + Змяніць чарнавік Edit Fillet - Edit Fillet + Змяніць акругленне Edit Groove - Edit Groove + Змяніць паз Edit Helix - Edit Helix + Змяніць спіраль Edit Hole - Edit Hole + Змяніць адтуліну Edit Linear Pattern - Edit Linear Pattern + Змяніць лінейны шаблон Edit Loft - Edit Loft + Змяніць профіль @@ -3729,47 +3730,47 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit Multi-Transform - Edit Multi-Transform + Змяніць множнае пераўтварэнне Edit Pad - Edit Pad + Змяніць выцягванне Edit Pipe - Edit Pipe + Змяніць траекторыю Edit Pocket - Edit Pocket + Змяніць кішэнь Edit Polar Pattern - Edit Polar Pattern + Змяніць палярны шаблон Edit Primitive - Edit Primitive + Змяніць першаснае цела Edit Revolution - Edit Revolution + Змяніць вярчэнне Edit Scale - Edit Scale + Змяніць маштаб Edit Thickness - Edit Thickness + Змяніць таўшчыню @@ -3777,17 +3778,17 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Parameters - Sprocket Parameters + Налады ланцуговага кола Number of teeth - Number of teeth + Колькасць зубцоў Sprocket reference - Sprocket reference + Апорнае ланцуговае кола @@ -3862,27 +3863,27 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Bicycle with derailleur - Bicycle with derailleur + Ровар з перамыкачам хуткасцей Bicycle without derailleur - Bicycle without derailleur + Ровар без перамыкача хуткасцей Chain pitch - Chain pitch + Крок ланцуга Chain roller diameter - Chain roller diameter + Дыяметр роліка ланцуга Tooth width - Tooth width + Шырыня зуба @@ -3987,42 +3988,42 @@ Note that the calculation can take some time Head type - Head type + Тып галоўкі Depth type - Depth type + Тып глыбіні Head diameter - Head diameter + Дыяметр галоўкі Head depth - Head depth + Глыбіня галоўкі Clearance / Passthrough - Clearance / Passthrough + Зазор / праходжанне Tap drill (to be threaded) - Tap drill (to be threaded) + Свердзел-метчык (для наразання разьбы) Modeled thread - Modeled thread + Мадэль разьбы Hole type - Hole type + Тып адтуліны @@ -4100,7 +4101,7 @@ Only available for holes without thread Hole Parameters - Hole Parameters + Налады адтуліны @@ -4253,7 +4254,7 @@ over 90: larger hole radius at the bottom Datums - З велічынёй + З кропкі адліку @@ -4268,27 +4269,27 @@ over 90: larger hole radius at the bottom Dress-Up Features - Dress-Up Features + Элементы аздаблення Transformation Features - Transformation Features + Элементы пераўтварэння Sprocket… - Sprocket… + Ланцуговае кола (зорачка)… Involute Gear - Involute Gear + Эвальвентная шасцярня Shaft Design Wizard - Shaft Design Wizard + Майстар праектавання валу @@ -4361,7 +4362,7 @@ over 90: larger hole radius at the bottom Shaft Wizard - Shaft Wizard + Майстар валоў @@ -4435,12 +4436,13 @@ over 90: larger hole radius at the bottom Missing Module - Missing Module + Адсутныя модулі The Plot add-on is not installed. Install it to enable this feature. - The Plot add-on is not installed. Install it to enable this feature. + Дадатак графіка не ўсталяванаы. +Усталюйце яе, каб уключыць дадзеную функцыю. @@ -4525,7 +4527,7 @@ over 90: larger hole radius at the bottom Result has multiple solids: enable 'Allow Compounds' in the active body. - Result has multiple solids: enable 'Allow Compounds' in the active body. + У выніку атрымліваецца мноства цвёрдых рэчываў: уключыце функцыю 'Дапускаць злучэнні' ў бягучым целе. @@ -4541,22 +4543,22 @@ over 90: larger hole radius at the bottom Cannot create a pad with a total length of zero. - Cannot create a pad with a total length of zero. + Не атрымалася стварыць выцягванне з агульнай даўжынёй, якая роўная нулю. Cannot create a pocket with a total length of zero. - Cannot create a pocket with a total length of zero. + Не атрымалася стварыць кішэнь з агульнай даўжынёй, якая роўная нулю. No extrusion geometry was generated. - No extrusion geometry was generated. + Геаметрыя выдушвання не была створаная. Resulting fused extrusion is null. - Resulting fused extrusion is null. + Выніковае выдушванне аб'яднання роўная нулю. @@ -4906,7 +4908,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Pipe: All sections need to be Part features - Pipe: All sections need to be Part features + Траекторыя: усе перасекі павінны быць элементамі дэталі @@ -5154,12 +5156,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Involute Gear - Involute Gear + Эвальвентная шасцярня Creates or edits the involute gear definition - Creates or edits the involute gear definition + Стварае ці змяняе вызначэнне эвальвентнай шасцярні @@ -5167,12 +5169,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Sprocket - Sprocket + Ланцуговае кола (зорачка) Creates or edits the sprocket definition. - Creates or edits the sprocket definition. + Стварае ці змяняе вызначэнне ланцуговага кола. @@ -5180,12 +5182,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Show final result - Show final result + Паказаць канчатковы вынік Show preview overlay - Show preview overlay + Паказаць накладанне папярэдняга прагляду @@ -5198,12 +5200,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Shaft Design Wizard - Shaft Design Wizard + Майстар праектавання валу Starts the shaft design wizard - Starts the shaft design wizard + Запускае майстар праектавання валу @@ -5211,12 +5213,13 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Failure while computing removed volume preview: %1 - Failure while computing removed volume preview: %1 + Памылка пры вылічэнні выдаленага папярэдняга прагляду аб'ёма: %1 Resulting shape is empty. That may indicate that no material will be removed or a problem with the model. - Resulting shape is empty. That may indicate that no material will be removed or a problem with the model. + Выніковая форма пустая. +Гэтае сведчыць, што матэрыял не будзе выдалены, альбо праблема з мадэллю. @@ -5224,12 +5227,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Create Datum - Create Datum + Стварыць кропку адліку Creates a datum object or local coordinate system - Creates a datum object or local coordinate system + Стварае аб'ект кропкі адліку ці лакальную сістэму каардынат @@ -5237,12 +5240,12 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Create Datum - Create Datum + Стварыць кропку адліку Creates a datum object or local coordinate system - Creates a datum object or local coordinate system + Стварае аб'ект кропкі адліку ці лакальную сістэму каардынат @@ -5344,7 +5347,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Revolution Parameters - Revolution Parameters + Налады вярчэння @@ -5352,7 +5355,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Groove Parameters - Groove Parameters + Налада пазу @@ -5360,7 +5363,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Transformed Feature Messages - Transformed Feature Messages + Паведамленні функцыі пераўтварэння @@ -5368,7 +5371,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Active Body - Active Body + Бягучае цела @@ -5384,22 +5387,22 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Datum Plane Parameters - Datum Plane Parameters + Налады апорнай плоскасці Datum Line Parameters - Datum Line Parameters + Налады апорнай лініі Datum Point Parameters - Datum Point Parameters + Налады апорнай кропкі Local Coordinate System Parameters - Local Coordinate System Parameters + Налады лакальнай сістэмы каардынат @@ -5407,7 +5410,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Draft Parameters - Draft Parameters + Налады чарнавіка @@ -5415,7 +5418,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Fillet Parameters - Fillet Parameters + Налады акруглення @@ -5423,7 +5426,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Linear Pattern Parameters - Linear Pattern Parameters + Налады лінейнага шаблону @@ -5431,7 +5434,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Mirror Parameters - Mirror Parameters + Налады сіметрычнага адлюстравання @@ -5439,7 +5442,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Multi-Transform Parameters - Multi-Transform Parameters + Налады множнага пераўтварэння @@ -5447,7 +5450,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Polar Pattern Parameters - Polar Pattern Parameters + Налады палярнага шаблону @@ -5455,7 +5458,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Scale Parameters - Scale Parameters + Налады маштабавання @@ -5463,7 +5466,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Thickness Parameters - Thickness Parameters + Налады таўшчыні @@ -5471,17 +5474,18 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Direction 2 - Direction 2 + Напрамак 2 Select a direction reference (edge, face, datum line) - Select a direction reference (edge, face, datum line) + Абраць апорны напрамак (рабро, грань, апорная лінія) Invalid selection. Select an edge, planar face, or datum line. - Invalid selection. Select an edge, planar face, or datum line. + Хібны выбар. +Абярыце рабро, плоскую грань ці апорную лінію. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index 1b6e6c1f73..1bb55af4c1 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -910,18 +910,18 @@ de manera que s'evita l'autointersecció. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Fer còpia - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list La llista de cossos és buida - + The body list cannot be empty La llista de cossos no pot ser buida - + Boolean: Accept: Input error Boolean: Acceptar: error d'entrada @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Cap cara seleccionada - + Face Cara @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Elimina - + Preview Previsualització - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Forma no seleccionada - + Sketch normal Croquis normal - + Face normal Cara Normal - - + + Custom direction Direcció personalitzada - + Click on a shape in the model Clica en una forma del model - + One sided One sided - + Two sided Two sided - + Symmetric Simetría - + Click on a face in the model Clica en una cara del model @@ -3189,50 +3189,49 @@ mesurada al llarg de la direcció especificada Error - + Several sub-elements selected S'han seleccionat diversos sub-elements - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected No s'ha seleccionat una cara de suport - + No planar support No hi ha suport pla - + No valid planes in this document Esbossos no vàlids en aquest document - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ mesurada al llarg de la direcció especificada - + - Close this dialog? @@ -3673,7 +3671,7 @@ Tot i que podreu migrar en qualsevol moment més tard amb 'Disseny de peces -> Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index 95abc10612..09375a4d9b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -910,18 +910,18 @@ aby se zabránilo sebe. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Vytvořit kopii - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Prázdný seznam těles - + The body list cannot be empty Seznam těles nemůže být prázdný - + Boolean: Accept: Input error Boolean: Přijetí: Chyba vstupu @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nevybrána žádná plocha - + Face Plocha @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Odstranit - + Preview Náhled - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Není vybrán útvar - + Sketch normal Normála náčrtu - + Face normal Normála plochy - - + + Custom direction Vlastní směr - + Click on a shape in the model Klikněte na tvar v modelu - + One sided One sided - + Two sided Two sided - + Symmetric Symetrické - + Click on a face in the model Klikněte na plochu v modelu @@ -3189,50 +3189,49 @@ měřena ve stanoveném směru Chyba - + Several sub-elements selected Několik pod-elementů vybráno - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Není vybrána podkladová plocha - + No planar support Žádný rovinný podklad - + No valid planes in this document V tomto dokumentu nejsou platné roviny - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ měřena ve stanoveném směru - + - Close this dialog? @@ -3675,7 +3673,7 @@ Přesto můžete provést migraci kdykoliv později pomocí 'PartDesign -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 0147452c39..ae90ccf750 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -201,7 +201,7 @@ damit eine Selbstdurchdringung vermieden wird. Creates a new body and activates it - Creates a new body and activates it + Erstellt einen neuen Körper und aktiviert ihn @@ -911,18 +911,18 @@ damit eine Selbstdurchdringung vermieden wird. Convert to Multi-Transform feature - + Sketch on Face Skizze auf Fläche - + Make copy Kopie erstellen - - + + New Sketch Neue Skizze @@ -1130,8 +1130,8 @@ damit eine Selbstdurchdringung vermieden wird. To create a new Part Design object, there must be an active body in the document. Select a body from below, or create a new body. - To create a new Part Design object, there must be an active body in the document. -Select a body from below, or create a new body. + Um ein neues Part-Design-Objekt zu erstellen, muss ein aktiver Körper in diesem Dokument vorhanden sein. +Unten einen der vorhandenen Körper auswählen oder einen neuen Körper erstellen. @@ -1242,7 +1242,7 @@ Select a body from below, or create a new body. Radius in local X-direction - Radius in local X-direction + Radius in lokaler X-Richtung @@ -1582,17 +1582,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Leere Körperliste - + The body list cannot be empty Die Körperliste darf nicht leer sein - + Boolean: Accept: Input error Boolean: Akzeptieren: Eingabefehler @@ -1669,7 +1669,7 @@ If zero, it is equal to Radius2 Empty draft created! - Leerer Entwurf erstellt! + Leere Formschräge erstellt! @@ -1693,7 +1693,7 @@ If zero, it is equal to Radius2 Adds all edges to the list box (only when in add selection mode) - Adds all edges to the list box (only when in add selection mode) + Fügt alle Kanten zum Listenfeld hinzu (nur im Auswahlmodus Hinzufügen) @@ -1704,13 +1704,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Keine Fläche ausgewählt - + Face Fläche @@ -1720,63 +1720,63 @@ If zero, it is equal to Radius2 Entfernen - + Preview Vorschau - + Select Faces Flächen auswählen - + Select reference… Referenz auswählen… - + No shape selected Keine Form gewählt - + Sketch normal Skizzennormale - + Face normal Flächennormale - - + + Custom direction Benutzerdefinierte Richtung - + Click on a shape in the model Auf eine Form im Modell klicken - + One sided Einseitig - + Two sided Zweiseitig - + Symmetric Symmetrisch - + Click on a face in the model Auf eine Fläche im Modell klicken @@ -2404,7 +2404,7 @@ If zero, it is equal to Radius2 Select Face - Select Face + Fläche auswählen @@ -2540,7 +2540,7 @@ entlang der angegebenen Richtung gemessen Selects all faces of the shape - Selects all faces of the shape + Wählt alle Flächen der Form aus @@ -2945,7 +2945,7 @@ entlang der angegebenen Richtung gemessen Shape Binder Parameters - Shape Binder Parameters + Parameter des Formbinders @@ -3190,50 +3190,49 @@ entlang der angegebenen Richtung gemessen Fehlermeldungen - + Several sub-elements selected Mehrere Unter-Elemente selektiert - + Select a single face as support for a sketch! Eine einzelne Fläche als Auflage für eine Skizze auswählen! - + Select a face as support for a sketch! Eine Fläche als Auflage für eine Skizze auswählen! - + Need a planar face as support for a sketch! Benötigt eine ebene Fläche als Auflage für eine Skizze! - + Create a plane first or select a face to sketch on Zuerst eine Ebene erstellen oder eine Fläche auswählen, um darauf eine Skizze zu erstellen - + No support face selected Keine Fläche als Auflage selektiert - + No planar support Keine ebene Auflage - + No valid planes in this document Keine gültigen Ebenen in diesem Dokument - + - A dialog is already open in the task panel @@ -3276,9 +3275,8 @@ entlang der angegebenen Richtung gemessen - + - Close this dialog? @@ -3433,7 +3431,7 @@ This may lead to unexpected results. No Part Design features without body found Nothing to migrate. - No Part Design features without body found Nothing to migrate. + Keine Part-Design-Objekte gefunden, die nicht zu einem Körper gehören. Nichts zu migrieren. @@ -3542,9 +3540,9 @@ This may lead to unexpected results. To use Part Design, an active body is required in the document. Activate a body (double-click) or create a new one. For legacy documents with Part Design objects lacking a body, use the migrate function in Part Design to place them into a body. - To use Part Design, an active body is required in the document. Activate a body (double-click) or create a new one. + Um Part-Design zu verwenden, ist ein aktiver Körper im Dokument erforderlich. Einen Körper aktivieren (Doppelklick) oder einen neuen erstellen. -For legacy documents with Part Design objects lacking a body, use the migrate function in Part Design to place them into a body. +Für veraltete Dokumente mit Part-Design-Objekten ohne Körper wird in Part-Design die Funktion Migrieren eingesetzt, um sie in einen Körper einzufügen. @@ -3674,7 +3672,7 @@ Es kann später jederzeit mit 'Part Design -> Migrieren...' migriert werden.< Migrate Manually - + Edit Boolean Boolesche Verknüpfung bearbeiten @@ -4522,7 +4520,7 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Result has multiple solids: enable 'Allow Compounds' in the active body. - Result has multiple solids: enable 'Allow Compounds' in the active body. + Das Ergebnis enthält mehrere Festkörper: 'Verbundobjekte zulassen' im aktiven Körper aktivieren. @@ -4538,22 +4536,22 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Cannot create a pad with a total length of zero. - Cannot create a pad with a total length of zero. + Ein Block mit einer Gesamtlänge von Null kann nicht erstellt werden. Cannot create a pocket with a total length of zero. - Cannot create a pocket with a total length of zero. + Eine Vertiefung mit einer Gesamtlänge von null kann nicht erstellt werden. No extrusion geometry was generated. - No extrusion geometry was generated. + Es wurde keine Extrusionsgeometrie erstellt. Resulting fused extrusion is null. - Resulting fused extrusion is null. + Die resultierende vereinigte Extrusion ist null. @@ -5468,7 +5466,7 @@ Skizzenobjekte dürfen einander nicht schneiden und auch mehrfache Flächen sind Direction 2 - Direction 2 + Richtung 2 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index 54e457c477..449ac1eb41 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -909,18 +909,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Δημιουργία αντιγράφου - - + + New Sketch New Sketch @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Κενή λίστα σωμάτων - + The body list cannot be empty Η λίστα σωμάτων δεν δύναται να είναι κενή - + Boolean: Accept: Input error Χρήση Λειτουργιών Boole: Αποδοχή: Σφάλμα εισαγωγής @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Δεν επιλέχθηκε καμία όψη - + Face Όψη @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 Αφαίρεση - + Preview Προεπισκόπηση - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Δεν έχει επιλεχθεί κανένα σχήμα - + Sketch normal Κανονικό σκαρίφημα - + Face normal Κανονικό πρόσωπο - - + + Custom direction Προσαρμοσμένη κατεύθυνση - + Click on a shape in the model Κάντε κλικ σε ένα σχήμα στο μοντέλο - + One sided One sided - + Two sided Two sided - + Symmetric Συμμετρική - + Click on a face in the model Κάντε κλικ σε μια όψη στο μοντέλο @@ -3188,50 +3188,49 @@ measured along the specified direction Σφάλμα - + Several sub-elements selected Επιλέχθηκαν διάφορα επιμέρους στοιχεία - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Δεν επιλέχθηκε όψη υποστήριξης - + No planar support Χωρίς επίπεδη υποστήριξη - + No valid planes in this document Δεν υπάρχουν έγκυρα επίπεδα σε αυτό το έγγραφο - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3674,7 +3672,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 66f0a9fb03..5fef6ec780 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -910,18 +910,18 @@ para que se evite la auto intersección. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Hacer copia - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Lista de cuerpos vacía - + The body list cannot be empty La lista de cuerpos no puede estar vacía - + Boolean: Accept: Input error Booleano: Aceptar: error de entrada @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Sin cara seleccionada - + Face Cara @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Quitar - + Preview Pre-visualizar - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected No hay forma seleccionada - + Sketch normal Croquis normal - + Face normal Normal de la cara - - + + Custom direction Dirección personalizada - + Click on a shape in the model Haga clic en una forma en el modelo - + One sided One sided - + Two sided Two sided - + Symmetric Simétrico - + Click on a face in the model Haga clic en una cara en el modelo @@ -3188,50 +3188,49 @@ measured along the specified direction Error - + Several sub-elements selected Varios sub-elementos seleccionados - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected No se ha seleccionado una cara de apoyo - + No planar support No hay soporte plano - + No valid planes in this document No hay planos válidos en este documento - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3670,7 +3668,7 @@ Aunque podrá migrar en cualquier momento después con 'Part Design -> Migrat Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 212213ca8a..1868bfa4ac 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -909,18 +909,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Egin kopia - - + + New Sketch New Sketch @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Gorputzen zerrenda hutsik - + The body list cannot be empty Gorputzen zerrenda ezin da hutsik egon - + Boolean: Accept: Input error Boolearra: Onartu: Sarrera-errorea @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Ez da aurpegirik hautatu - + Face Aurpegia @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 Kendu - + Preview Aurrebista - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Ez da formarik hautatu - + Sketch normal Krokisaren normala - + Face normal Aurpegiaren normala - - + + Custom direction Norabide pertsonalizatua - + Click on a shape in the model Click on a shape in the model - + One sided One sided - + Two sided Two sided - + Symmetric Simetrikoa - + Click on a face in the model Egin klik ereduaren aurpegietako batean @@ -3188,50 +3188,49 @@ zehaztutako norabidean Errorea - + Several sub-elements selected Azpielementu bat baino gehiago hautatu da - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Ez da euskarri-aurpegirik hautatu - + No planar support Ez dago euskarri planarrik - + No valid planes in this document Ez dago baliozko planorik dokumentu honetan - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ zehaztutako norabidean - + - Close this dialog? @@ -3672,7 +3670,7 @@ Geroago ere egin dezakezu migrazioa, 'Part Design -> Migratu' erabilita.Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index 6292cd997e..bd149cd748 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -910,18 +910,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Tee kopio - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Tyhjennä kappalelista - + The body list cannot be empty Kappalelista ei voi olla tyhjä - + Boolean: Accept: Input error Boolean: Hyväksy: Virhe syöttöarvoissa @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Yhtään pintaa ei ole valittu - + Face Pinta @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Poista - + Preview Esikatselu - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Ei valittua muotoa - + Sketch normal Sketsin normaali - + Face normal Pinnan normaali - - + + Custom direction Mukautettu suunta - + Click on a shape in the model Napsauta mallissa olevaa muotoa - + One sided One sided - + Two sided Two sided - + Symmetric Symmetrinen - + Click on a face in the model Napsauta mallin pintaa @@ -3189,50 +3189,49 @@ valittuun suuntaan Virhe - + Several sub-elements selected Valittu useita alielementtejä - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Pintaa ei ole valittu - + No planar support Ei tukea tasoille - + No valid planes in this document Asiakirjassa ei ole soveltuvaa tasomuotoa - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ valittuun suuntaan - + - Close this dialog? @@ -3675,7 +3673,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index c596d42ea3..2128baff46 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -911,18 +911,18 @@ False = engrenage planétaire Transformation multiple - + Sketch on Face Créer une esquisse sur une face - + Make copy Créer une copie - - + + New Sketch Créer une esquisse @@ -1242,7 +1242,7 @@ Sélectionner un corps parmi ceux ci-dessous ou créer en un nouveau. Radius in local X-direction - Radius in local X-direction + Rayon dans la direction X locale @@ -1253,8 +1253,8 @@ Sélectionner un corps parmi ceux ci-dessous ou créer en un nouveau. Radius in local Y-direction If zero, it is equal to Radius2 - Radius in local Y-direction -If zero, it is equal to Radius2 + Rayon dans la direction Y locale +S'il est égal à zéro, il est égal à Radius2. @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Liste de corps vide - + The body list cannot be empty La liste de corps ne peut pas être vide. - + Boolean: Accept: Input error Opération booléenne : Accepter : erreur de saisie @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Aucune face sélectionnée - + Face Face @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 Supprimer - + Preview Aperçu - + Select Faces Sélectionner des faces - + Select reference… Sélectionner une référence… - + No shape selected Aucune forme sélectionnée - + Sketch normal Normale à l'esquisse - + Face normal Face normale - - + + Custom direction Direction personnalisée  - + Click on a shape in the model Cliquer sur une forme dans le modèle - + One sided Unilatéral - + Two sided Bilatéral - + Symmetric Symétrique - + Click on a face in the model Cliquer sur une face du modèle @@ -3185,50 +3185,49 @@ measured along the specified direction Erreur - + Several sub-elements selected Plusieurs sous-éléments sélectionnés - + Select a single face as support for a sketch! Sélectionnez une seule face comme support pour une esquisse ! - + Select a face as support for a sketch! Sélectionnez une face comme support pour une esquisse ! - + Need a planar face as support for a sketch! Il est nécessaire d'avoir d'une face plane comme support pour une esquisse ! - + Create a plane first or select a face to sketch on Il faut d'abord créer un plan ou sélectionner une face où placer l'esquisse. - + No support face selected Aucune face de support sélectionnée - + No planar support Aucun plan de support - + No valid planes in this document Pas de plan valide dans le document - + - A dialog is already open in the task panel @@ -3271,9 +3270,8 @@ measured along the specified direction - + - Close this dialog? @@ -3663,7 +3661,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrer manuellement - + Edit Boolean Éditer l'opération booléenne @@ -4891,7 +4889,7 @@ Les entités d'esquisse qui se croisent ou les faces multiples dans une esquisse Pipe: All sections need to be Part features - Balayage : toutes les sections doivent être des fonctions de PartDesign. + Balayage : toutes les sections doivent être des fonctions de Part. @@ -5456,17 +5454,17 @@ Les entités d'esquisse qui se croisent ou les faces multiples dans une esquisse Direction 2 - Direction 2 + Direction 2 Select a direction reference (edge, face, datum line) - Select a direction reference (edge, face, datum line) + Sélectionner une référence de direction (arête, face, ligne de référence) Invalid selection. Select an edge, planar face, or datum line. - Invalid selection. Select an edge, planar face, or datum line. + La sélection est non valide. Sélectionner une arête, une face planaire ou une ligne de référence. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index b9d09307af..009c859f45 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -910,18 +910,18 @@ tako da je izbjegnuto samopresjecanje. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Napravi kopiju - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Prazna lista tijela - + The body list cannot be empty Tijelo, lista ne može biti prazna - + Boolean: Accept: Input error Booleov operator: Prihvatiti: ulazne pogreške @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nije odabrana niti jedna površina - + Face Površina @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Ukloniti - + Preview Pregled - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nema odabranih oblika - + Sketch normal Normalna skica - + Face normal Normala lica - - + + Custom direction Prilagođeni smjer - + Click on a shape in the model Kliknite na oblik u modelu - + One sided One sided - + Two sided Two sided - + Symmetric Simetrično - + Click on a face in the model Kliknite na lice u modelu @@ -3189,50 +3189,49 @@ mjereno duž navedenog smjera Pogreška - + Several sub-elements selected Nekoliko pod-elemenata odabrano - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nije odabrana površina za podršku - + No planar support Nema planarni podršku - + No valid planes in this document Nema valjanih ravnina u ovom dokumentu - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ mjereno duž navedenog smjera - + - Close this dialog? @@ -3675,7 +3673,7 @@ Iako ćete moći migrirati u bilo svakom trenutku kasnije s 'Dizajn dijela -> Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index b4401eb7f1..75aeefe9f4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -910,18 +910,18 @@ az önmetszés elkerülése érdekében. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Másolat készítése - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Test listájának ürítése - + The body list cannot be empty Test listája nem lehet üres - + Boolean: Accept: Input error Logikai: Fogadja el: beviteli hiba @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nincs kijelölve felület - + Face Felület @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Törlés - + Preview Előnézet - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nincs kijelölve alakzat - + Sketch normal Normál vektor vázlata - + Face normal Aktuális felület - - + + Custom direction Egyéni irány - + Click on a shape in the model Kattintson egy alakzatra a modellben - + One sided One sided - + Two sided Two sided - + Symmetric Szimmetrikus - + Click on a face in the model Kattintson a modell felületére @@ -3188,50 +3188,49 @@ measured along the specified direction Hiba - + Several sub-elements selected Több al-elemet jelölt ki - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected A kijelölt felület nem támogatott - + No planar support Nem támogatott sík - + No valid planes in this document Ebben a dokumentumban nincs érvényes sík - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3674,7 +3672,7 @@ Viszont később is bármikor áttelepítheti a 'AlkatrészTervező -> Áttel Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index f57cc8b616..8efd9ec567 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -910,18 +910,18 @@ in modo da evitare l'intersezione automatica. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Fà una copia - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list La lista dei corpi è vuota - + The body list cannot be empty La lista dei corpi non può essere vuota - + Boolean: Accept: Input error Booleana: Accettare: errore di Input @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nessuna faccia selezionata - + Face Faccia @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Rimuovi - + Preview Anteprima - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nessuna forma selezionata - + Sketch normal Normale allo schizzo - + Face normal Faccia normale - - + + Custom direction Direzione personalizzata - + Click on a shape in the model Fare clic su una forma nel modello - + One sided One sided - + Two sided Two sided - + Symmetric Simmetrica - + Click on a face in the model Fare clic su una faccia nel modello @@ -3189,50 +3189,49 @@ misurata lungo la direzione specificata Errore - + Several sub-elements selected Diversi sottoelementi selezionati - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nessuna faccia di supporto selezionata - + No planar support Nessun supporto planare - + No valid planes in this document In questo documento non c'è nessun piano valido - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ misurata lungo la direzione specificata - + - Close this dialog? @@ -3669,7 +3667,7 @@ Comunque si può decidere di migrare in ogni momento con 'Part Design -> Migr Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index 93b0f54750..dec8a1c148 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -909,18 +909,18 @@ so that self intersection is avoided. マルチ変換フィーチャーに変換 - + Sketch on Face 面上にスケッチ - + Make copy コピーの作成 - - + + New Sketch 新しいスケッチ @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list ボディーのリストを空にする - + The body list cannot be empty このボディーのリストは空にできません - + Boolean: Accept: Input error ブーリアン: 許可: 入力エラー @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected 面が選択されていません - + Face 面 @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 削除 - + Preview プレビュー - + Select Faces 面を選択 - + Select reference… 参照を選択... - + No shape selected シェイプが選択されていません - + Sketch normal スケッチ法線 - + Face normal 面の法線 - - + + Custom direction カスタム方向 - + Click on a shape in the model モデルのシェイプをクリック - + One sided 片側 - + Two sided 両側 - + Symmetric 対称 - + Click on a face in the model モデルの面をクリック @@ -3188,50 +3188,49 @@ measured along the specified direction エラー - + Several sub-elements selected いくつかのサブ要素が選択されています - + Select a single face as support for a sketch! スケッチのサポートとして1つの面を選択してください！ - + Select a face as support for a sketch! スケッチのサポートとして面を選択してください！ - + Need a planar face as support for a sketch! スケッチのサポートとして平らな面が必要です！ - + Create a plane first or select a face to sketch on まず平面を作成するか、またはスケッチを描く面を選択してください。 - + No support face selected サポート面が選択されていません - + No planar support 平面のサポートがありません - + No valid planes in this document このドキュメントには有効な平面がありません。 - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3668,7 +3666,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi 手動で移行 - + Edit Boolean ブーリアンを編集 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts index 167ad3deaf..94fc05b047 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts @@ -482,7 +482,7 @@ so that self intersection is avoided. Set Tip - Set Tip + ბუნიკის დაყენება @@ -909,18 +909,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy ასლის გადაღება - - + + New Sketch ახალი ესკიზი @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list სხეულების სია ცარიელია - + The body list cannot be empty სხეულების სია არ შეიძლება ცარიელი იყოს - + Boolean: Accept: Input error ლოგიკური მნიშვნელობა: შეყვანის შეცდომა @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected ზედაპირი არჩეული არაა - + Face სიბრტყე @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 წაშლა - + Preview მინიატურა - + Select Faces აირჩიეთ ზედაპირები - + Select reference… Select reference… - + No shape selected მოხაზულობა მონიშნული არაა - + Sketch normal ნორმალური ესკიზი - + Face normal ზედაპირის ნორმალი - - + + Custom direction მიმართულების ხელით მითითება - + Click on a shape in the model დააწკაპუნეთ მოხაზულობაზე მოდელში - - - One sided - One sided - - Two sided - Two sided + One sided + ერთმხრიანი + Two sided + ორმხრიანი + + + Symmetric სიმეტრიული - + Click on a face in the model დააწკაპუნეთ ზედაპირზე მოდელში @@ -1913,19 +1913,19 @@ If zero, it is equal to Radius2 Base X-axis - Base X-axis + საბაზისო X ღერძი Base Y-axis - Base Y-axis + საბაზისო Y ღერძი Base Z-axis - Base Z-axis + საბაზისო Z ღერძი @@ -2402,12 +2402,12 @@ If zero, it is equal to Radius2 Select Face - Select Face + აირჩიეთ ზედაპირი Side 2 - Side 2 + მხარე 2 @@ -2520,7 +2520,7 @@ measured along the specified direction Side 1 - Side 1 + მხარე 1 @@ -2532,7 +2532,7 @@ measured along the specified direction Select Shape - Select Shape + აირჩიეთ მოხაზულობა @@ -2812,19 +2812,19 @@ measured along the specified direction Base X-axis - Base X-axis + საბაზისო X ღერძი Base Y-axis - Base Y-axis + საბაზისო Y ღერძი Base Z-axis - Base Z-axis + საბაზისო Z ღერძი @@ -3063,17 +3063,17 @@ measured along the specified direction Base X-axis - Base X-axis + საბაზისო X ღერძი Base Y-axis - Base Y-axis + საბაზისო Y ღერძი Base Z-axis - Base Z-axis + საბაზისო Z ღერძი @@ -3132,7 +3132,7 @@ measured along the specified direction Select Body - Select Body + აირჩიეთ სხეული @@ -3188,50 +3188,49 @@ measured along the specified direction შეცდომა - + Several sub-elements selected მონიშნულია რამდენიმე ქვე-ელემენტი - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected საყრდენი ზედაპირი არჩეული არაა - + No planar support არაბრტყელი საყრდენი - + No valid planes in this document დოკუმენტში არ არსებობს სწორი სიბრტყეები - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3674,9 +3672,9 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean - Edit Boolean + ბულევური ოპერაციის ჩასწორება @@ -3869,7 +3867,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Chain pitch - Chain pitch + ჯაჭვის ბიჯი @@ -3879,7 +3877,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Tooth width - Tooth width + კბილის სიგანე @@ -5470,7 +5468,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Direction 2 - Direction 2 + მიმართულება 2 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts index 35e6cd4e01..e625db07e0 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts @@ -907,18 +907,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy 사본 만들기 - - + + New Sketch New Sketch @@ -1578,17 +1578,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list 비어 있는 몸통 목록 - + The body list cannot be empty 몸통 목록은 비어있을 수 없습니다 - + Boolean: Accept: Input error 불리언: 수락: 입력 오류 @@ -1700,13 +1700,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected 선택된 면 없음 - + Face 면 @@ -1716,63 +1716,63 @@ If zero, it is equal to Radius2 제거 - + Preview 미리보기 - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected 선택된 형상이 없습니다. - + Sketch normal 스케치면에 수직 - + Face normal 면에 수직 - - + + Custom direction 사용자 정의 방향 - + Click on a shape in the model 모형에서 형상을 클릭하세요 - + One sided One sided - + Two sided Two sided - + Symmetric 대칭 - + Click on a face in the model 모형의 면을 클릭하세요 @@ -3183,50 +3183,49 @@ measured along the specified direction 오류 - + Several sub-elements selected 하부 요소들이 선택되었습니다. - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected 선택된 받침면이 없습니다. - + No planar support 평평한 받침이 없음 - + No valid planes in this document 이 문서에는 유효한 평면이 없습니다. - + - A dialog is already open in the task panel @@ -3269,9 +3268,8 @@ measured along the specified direction - + - Close this dialog? @@ -3669,7 +3667,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 7fa5b3aa67..315bf2fb2d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -908,18 +908,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Maak een kopie - - + + New Sketch New Sketch @@ -1579,17 +1579,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Leeg lichaam lijst - + The body list cannot be empty Deze lichaam lijst mag niet leeg zijn - + Boolean: Accept: Input error Boolean: Accept: Input error @@ -1701,13 +1701,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Geen vlak geselecteerd - + Face Vlak @@ -1717,63 +1717,63 @@ If zero, it is equal to Radius2 Verwijderen - + Preview Voorbeeldweergave - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Geen vorm geselecteerd - + Sketch normal Schets normaal - + Face normal Loodrecht - - + + Custom direction Aangepaste richting - + Click on a shape in the model Klik op een vorm in het model - + One sided One sided - + Two sided Two sided - + Symmetric Symmetrisch - + Click on a face in the model Klik op een vlak in het model @@ -3187,50 +3187,49 @@ gemeten in de opgegeven richting Fout - + Several sub-elements selected Verschillende sub-elementen geselecteerd - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Geen basisvlak geselecteerd - + No planar support Geen platvlak - + No valid planes in this document Geen geldige werk-vlakken in dit document - + - A dialog is already open in the task panel @@ -3273,9 +3272,8 @@ gemeten in de opgegeven richting - + - Close this dialog? @@ -3673,7 +3671,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index f14ea538ba..91555fc25d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -377,7 +377,7 @@ wartość Fałsz = uzębienie wewnętrzne Datum Line - Datum Line + Linia odniesienia @@ -557,7 +557,7 @@ wartość Fałsz = uzębienie wewnętrzne Datum Plane - Datum Plane + Płaszczyzna odniesienia @@ -593,7 +593,7 @@ wartość Fałsz = uzębienie wewnętrzne Datum Point - Datum Point + Punkt odniesienia @@ -912,18 +912,18 @@ wartość Fałsz = uzębienie wewnętrzne Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Utwórz kopię - - + + New Sketch New Sketch @@ -1037,7 +1037,7 @@ wartość Fałsz = uzębienie wewnętrzne Boolean Tools - Boolean Tools + Narzędzia operacji logicznych @@ -1228,12 +1228,12 @@ Select a body from below, or create a new body. U parameter - U parameter + Parametr U V parameters - V parameters + Parametry V @@ -1243,25 +1243,25 @@ Select a body from below, or create a new body. Radius in local X-direction - Radius in local X-direction + Promień w kierunku lokalnej osi X Radius 3 - Radius 3 + Promień 3 Radius in local Y-direction If zero, it is equal to Radius2 - Radius in local Y-direction -If zero, it is equal to Radius2 + Promień w kierunku lokalnej osi Y +Jeśli wartość wynosi zero, jest równa wartości promienia 2 V parameter - V parameter + Parametr V @@ -1283,32 +1283,32 @@ If zero, it is equal to Radius2 Circumradius - Circumradius + Promień okręgu opisanego X min/max - X min/max + X min / max Y min/max - Y min/max + Y min / max Z min/max - Z min/max + Z min / max X2 min/max - X2 min/max + X2 min / max Z2 min/max - Z2 min/max + Z2 min / max @@ -1318,7 +1318,7 @@ If zero, it is equal to Radius2 Coordinate system - Coordinate system + Układ współrzędnych @@ -1328,24 +1328,24 @@ If zero, it is equal to Radius2 Number of rotations - Number of rotations + Liczba obrotów Angle 1 - Angle 1 + Kąt 1 Angle 2 - Angle 2 + Kąt 2 From 3 Points - From 3 Points + Przez trzy punkty @@ -1583,17 +1583,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Lista zawartości jest pusta - + The body list cannot be empty Lista zawartości nie może być pusta - + Boolean: Accept: Input error Funkcja logiczna: Akceptuj: Błąd danych wejściowych @@ -1706,13 +1706,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nie zaznaczono ściany - + Face Powierzchnia @@ -1722,63 +1722,63 @@ If zero, it is equal to Radius2 Usuń - + Preview Podgląd - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Brak wybranych kształtów - + Sketch normal Wektor normalny szkicu - + Face normal Wektor normalny ściany - - + + Custom direction Kierunek niestandardowy - + Click on a shape in the model Kliknij kształt modelu - - - One sided - One sided - - Two sided - Two sided + One sided + W jednym kierunku + Two sided + W dwóch kierunkach + + + Symmetric Symetrycznie - + Click on a face in the model Kliknij ścianę modelu @@ -2411,7 +2411,7 @@ If zero, it is equal to Radius2 Side 2 - Side 2 + Strona 2 @@ -2488,7 +2488,7 @@ mierzona wzdłuż podanego kierunku X-component of direction vector - X-component of direction vector + Składowa X wektora kierunku @@ -2498,7 +2498,7 @@ mierzona wzdłuż podanego kierunku Y-component of direction vector - Y-component of direction vector + Składowa Y wektora kierunku @@ -2508,7 +2508,7 @@ mierzona wzdłuż podanego kierunku Z-component of direction vector - Z-component of direction vector + Składowa Z wektora kierunku @@ -2524,7 +2524,7 @@ mierzona wzdłuż podanego kierunku Side 1 - Side 1 + Strona 1 @@ -2536,7 +2536,7 @@ mierzona wzdłuż podanego kierunku Select Shape - Select Shape + Wybierz kształt @@ -2816,13 +2816,13 @@ mierzona wzdłuż podanego kierunku Base X-axis - Base X-axis + Bazowa oś X Base Y-axis - Base Y-axis + Bazowa oś Y @@ -3192,50 +3192,49 @@ mierzona wzdłuż podanego kierunku Błąd - + Several sub-elements selected Wybrano kilka podelementów - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nie wybrano ściany bazowej - + No planar support Brak płaskiej powierzchni - + No valid planes in this document Brak prawidłowej płaszczyzny w tym dokumencie - + - A dialog is already open in the task panel @@ -3278,13 +3277,12 @@ mierzona wzdłuż podanego kierunku - + - Close this dialog? - Close this dialog? + Zamknąć to okno dialogowe? @@ -3679,14 +3677,14 @@ Migracja będzie możliwa w każdej chwili za pomocą "Projekt części -> Mi Migrate Manually - + Edit Boolean Edit Boolean Edit Chamfer - Edit Chamfer + Edycja funkcji sfazowania @@ -3696,7 +3694,7 @@ Migracja będzie możliwa w każdej chwili za pomocą "Projekt części -> Mi Edit Fillet - Edit Fillet + Edycja funkcji zaokrąglenia @@ -5475,17 +5473,18 @@ Przecinające się elementy szkicu lub wiele ścian w szkicu nie są dozwolone.< Direction 2 - Direction 2 + Kierunek 2 Select a direction reference (edge, face, datum line) - Select a direction reference (edge, face, datum line) + Wybierz odniesienie kierunku (krawędź, ścianę, linię odniesienia). Invalid selection. Select an edge, planar face, or datum line. - Invalid selection. Select an edge, planar face, or datum line. + Nieprawidłowy wybór. +Wybierz krawędź, płaszczyznę lub linię odniesienia. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index 1b4ca59828..a86a9a7029 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -909,18 +909,18 @@ para que a auto-interseção seja evitada. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Fazer cópia - - + + New Sketch New Sketch @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Lista de corpos vazia - + The body list cannot be empty A lista de corpos não pode estar vazia - + Boolean: Accept: Input error Booleano: Aceitar: erro de entrada @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nenhuma face selecionada - + Face Face @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 Remover - + Preview Pré-visualização - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nenhuma forma selecionada - + Sketch normal Nornal do sketch - + Face normal Face normal - - + + Custom direction Direção personalizada - + Click on a shape in the model Clique em uma forma no modelo - + One sided One sided - + Two sided Two sided - + Symmetric Simétrico - + Click on a face in the model Clique em uma face no modelo @@ -3188,50 +3188,49 @@ medido ao longo da direção especificada Erro - + Several sub-elements selected Vários sub-elementos selecionados - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nenhuma face de suporte selecionada - + No planar support Nenhum suporte planar - + No valid planes in this document Não há planos válidos neste documento - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ medido ao longo da direção especificada - + - Close this dialog? @@ -3670,7 +3668,7 @@ Embora você possa migrar a qualquer momento mais tarde com 'Part Design -> M Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 8fb955209e..7c73c2a623 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -910,18 +910,18 @@ astfel încât intersecția de sine să fie evitată. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Fă o copie - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Lista cu corpurile vide - + The body list cannot be empty Lista corpurilor nu poate fi goală - + Boolean: Accept: Input error Boolean: Accepta: eroare de intrare @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nici o faţă selectată - + Face Faţă @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Elimină - + Preview Previzualizare - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nici o forma selectata - + Sketch normal Schiță normală - + Face normal Faţă normală - - + + Custom direction Direcție personalizată - + Click on a shape in the model Click on a shape in the model - + One sided One sided - + Two sided Two sided - + Symmetric Simetrice - + Click on a face in the model Faceți clic pe o față din model @@ -3189,50 +3189,49 @@ măsurată de-a lungul direcției specificate Eroare - + Several sub-elements selected Mai multe sub-elemente selectate - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nici o faţă suport selectată - + No planar support Nici un plan suport - + No valid planes in this document Nu sunt plane valabile în acest document - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ măsurată de-a lungul direcției specificate - + - Close this dialog? @@ -3671,7 +3669,7 @@ Deși veți putea migra în orice moment mai târziu cu „Part Design -> Mig Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index b4acf34459..f4f8e3e435 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -910,18 +910,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Сделать копию - - + + New Sketch New Sketch @@ -1206,14 +1206,14 @@ Select a body from below, or create a new body. Radius 1 - Радиус 1 + Радиус колеса 1 Radius 2 - Радиус 2 + Радиус колеса 2 @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Пустой список тел - + The body list cannot be empty Список тел не может быть пустым - + Boolean: Accept: Input error Логическое значение: Принять: Ошибка ввода @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Грань не выбрана - + Face Грань @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Убрать - + Preview Предварительный просмотр - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Профиль не выбран - + Sketch normal Нормаль эскиза - + Face normal Нормаль грани - - + + Custom direction Произвольное направление - + Click on a shape in the model Нажмите на форму в модели - + One sided One sided - + Two sided Two sided - + Symmetric Симметрично - + Click on a face in the model Выберите грань внутри модели @@ -3187,50 +3187,49 @@ measured along the specified direction Ошибка - + Several sub-elements selected Неправильное выделение - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Не выбрана грань - + No planar support Неплоская грань - + No valid planes in this document В документе нет корректных плоскостей - + - A dialog is already open in the task panel @@ -3273,9 +3272,8 @@ measured along the specified direction - + - Close this dialog? @@ -3671,7 +3669,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 2b5d1fe6e6..c7453f37f9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -910,18 +910,18 @@ da se izogne samosečnosti. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Naredi kopijo - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Izprazni seznam teles - + The body list cannot be empty Seznam teles ne more biti prazen - + Boolean: Accept: Input error Logične vrednosti: Potrdi: Vnosna napaka @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Nobena ploskev ni izbrana - + Face Ploskev @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Odstrani - + Preview Predogled - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Nobena oblika ni izbrana - + Sketch normal Normala na očrt - + Face normal Ploskvina normala - - + + Custom direction Smer po meri - + Click on a shape in the model Kliknite na obliko v oblikovancu - + One sided One sided - + Two sided Two sided - + Symmetric Somerno - + Click on a face in the model Klikni na ploskev v modelu @@ -3189,50 +3189,49 @@ merjena vzdolž določene smeri Napaka - + Several sub-elements selected Izbranih več podelementov - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nobena podporna ploskev ni izbrana - + No planar support Ni ravninske podpore - + No valid planes in this document Ni veljavnih ravnin v tem dokumentu - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ merjena vzdolž določene smeri - + - Close this dialog? @@ -3675,7 +3673,7 @@ Neglede na to je selitev v bodoče z "Snovanje delov -> Preseli" mogoča kada Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts index 8eda172443..e2c2c9b317 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts @@ -910,18 +910,18 @@ vrednost za korak na osnovu graničnog okvira oko profila. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Napravi kopiju - - + + New Sketch Nova skica @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Lista sa telima je prazna - + The body list cannot be empty Lista sa telima ne može da bude prazna - + Boolean: Accept: Input error Bulova: Prihvati: Greška u unosu @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Stranica nije izabrana - + Face Stranica @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Ukloni - + Preview Pregled - + Select Faces Izaberi stranice - + Select reference… Izaberi referencu… - + No shape selected Nema odabranih oblika - + Sketch normal Normala na skicu - + Face normal Normala na stranicu - - + + Custom direction Sopstveni smer - + Click on a shape in the model Klikni na neki oblik na modelu - + One sided One sided - + Two sided Two sided - + Symmetric Simetrično - + Click on a face in the model Klikni na stranicu modela @@ -3189,50 +3189,49 @@ merena duž zadatog pravca Greška - + Several sub-elements selected Nekoliko pod-elemenata izabrano - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Nije izabrana stranica kao osnova - + No planar support Nema ravni kao osnove - + No valid planes in this document Nema važećih ravni u ovom dokumentu - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ merena duž zadatog pravca - + - Close this dialog? @@ -3675,7 +3673,7 @@ Mada, moći ćeš da migriraš u bilo kom trenutku kasnije pomoću 'Konstruisanj Migriraj ručno - + Edit Boolean Uredi bulovu operaciju diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index 9915a9011c..6edb1e6fe2 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -910,18 +910,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Направи копију - - + + New Sketch Нова скица @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Листа са телима је празна - + The body list cannot be empty Листа са телима не може да буде празна - + Boolean: Accept: Input error Булова: Прихвати: Грешка у уносу @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Страница није изабрана - + Face Страница @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Уклони - + Preview Преглед - + Select Faces Изабери странице - + Select reference… Изабери референцу… - + No shape selected Нема одабраних облика - + Sketch normal Нормала на скицу - + Face normal Нормала на страницу - - + + Custom direction Сопствени смер - + Click on a shape in the model Кликни на неки обик на моделу - + One sided One sided - + Two sided Two sided - + Symmetric Симетрично - + Click on a face in the model Кликни на страницу модела @@ -3189,50 +3189,49 @@ measured along the specified direction Грешка - + Several sub-elements selected Неколико под-елемената изабрано - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Није одабрана страница као основа - + No planar support Нема равни као основе - + No valid planes in this document Нема важећих равни у овом документу - + - A dialog is already open in the task panel @@ -3275,9 +3274,8 @@ measured along the specified direction - + - Close this dialog? @@ -3675,7 +3673,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Мигрирај ручно - + Edit Boolean Уреди булову операцију diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index 67489b6b7a..1aca9f8148 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -909,18 +909,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Skapa kopia - - + + New Sketch New Sketch @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Töm kropplista - + The body list cannot be empty Kropplistan får ej vara tom - + Boolean: Accept: Input error Boolean: Acceptera: Felinmatning @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Inget yta vald - + Face Yta @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 Ta bort - + Preview Förhandsvisning - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Ingen form har valts - + Sketch normal Skiss normal - + Face normal Ansikte normalt - - + + Custom direction Anpassad riktning - + Click on a shape in the model Klicka på en form i modellen - + One sided One sided - + Two sided Two sided - + Symmetric Symmetrisk - + Click on a face in the model Klicka på ett ansikte i modellen @@ -3188,50 +3188,49 @@ mätas längs den angivna riktningen Fel - + Several sub-elements selected Flera underelement valda - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Ingen stödyta vald - + No planar support Inget planärt stöd - + No valid planes in this document Inga giltiga plan i detta dokument - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ mätas längs den angivna riktningen - + - Close this dialog? @@ -3670,7 +3668,7 @@ Om du vägrar att migrera kommer du inte att kunna använda nya PartDesign-funkt Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index 68c4c5e413..2349f1b050 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -911,18 +911,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Kopya oluştur - - + + New Sketch Yeni eskiz @@ -1582,17 +1582,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Boş gövde listesi - + The body list cannot be empty Gövde listesi boş olamaz - + Boolean: Accept: Input error Boolean: Kabul Ediyorum: Giriş hatası @@ -1704,13 +1704,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Seçili yüz yok - + Face Yüz @@ -1720,63 +1720,63 @@ If zero, it is equal to Radius2 Kaldır - + Preview Önizleme - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Şekil seçilmedi - + Sketch normal Eskize dik - + Face normal Yüzey normali - - + + Custom direction Özel yön - + Click on a shape in the model Click on a shape in the model - + One sided One sided - + Two sided Two sided - + Symmetric Simetrik - + Click on a face in the model Modeldeki bir yüzeye tıklayın @@ -3190,50 +3190,49 @@ belirlenen yön boyunca ölçülecek Hata - + Several sub-elements selected Birkaç alt eleman seçildi - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Desteklenmeyen bir yüz seçili - + No planar support Düzlemsel desteği yok - + No valid planes in this document Bu belgede geçerli uçaklar yok - + - A dialog is already open in the task panel @@ -3276,9 +3275,8 @@ belirlenen yön boyunca ölçülecek - + - Close this dialog? @@ -3676,7 +3674,7 @@ Buna karşın, daha sonra istediğiniz an 'ParçaTasarımı->Geçiş...' 'Par Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index 5b0b1a13c5..ef21db27bc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -910,18 +910,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy Зробити копію - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list Пустий список тіл - + The body list cannot be empty Список тіл не може бути пустим - + Boolean: Accept: Input error Логічне значення: Прийняти: Помилка введення @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected Грань не виділена - + Face Грань @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 Видалити - + Preview Попередній перегляд - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected Немає обраної форми - + Sketch normal Нормаль Ескізу - + Face normal Нормаль Грані - - + + Custom direction Довільний напрямок - + Click on a shape in the model Натисніть на фігуру в моделі - + One sided One sided - + Two sided Two sided - + Symmetric Симетрично - + Click on a face in the model Натисніть на грань в моделі @@ -3188,50 +3188,49 @@ measured along the specified direction Помилка - + Several sub-elements selected Обрано декілька під-елементів - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected Не обрано базової грані - + No planar support Площина підтримки відсутня - + No valid planes in this document В цьому документі відсутні коректні площини - + - A dialog is already open in the task panel @@ -3274,9 +3273,8 @@ measured along the specified direction - + - Close this dialog? @@ -3674,7 +3672,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index 658d98ba7f..b0e2c057c2 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -909,18 +909,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy 制作副本 - - + + New Sketch New Sketch @@ -1580,17 +1580,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list 空的实体列表 - + The body list cannot be empty 实体列表不能空 - + Boolean: Accept: Input error 布尔值： 接受： 输入错误 @@ -1702,13 +1702,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected 未选择任何面 - + Face 面 @@ -1718,63 +1718,63 @@ If zero, it is equal to Radius2 移除 - + Preview 预览 - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected 无选定的形状 - + Sketch normal 草图法向 - + Face normal 面法线 - - + + Custom direction 自定义方向： - + Click on a shape in the model 点击模型中的形状 - + One sided One sided - + Two sided Two sided - + Symmetric 对称 - + Click on a face in the model 点击模型中的一个面 @@ -3187,50 +3187,49 @@ measured along the specified direction 错误 - + Several sub-elements selected 若干子元素被选择 - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected 未选中支持面 - + No planar support 无支持平面 - + No valid planes in this document 文档中无有效平面 - + - A dialog is already open in the task panel @@ -3273,9 +3272,8 @@ measured along the specified direction - + - Close this dialog? @@ -3671,7 +3669,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index 0f3e921625..8c0dc3ba81 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -910,18 +910,18 @@ so that self intersection is avoided. Convert to Multi-Transform feature - + Sketch on Face Sketch on Face - + Make copy 製作拷貝 - - + + New Sketch New Sketch @@ -1581,17 +1581,17 @@ If zero, it is equal to Radius2 PartDesignGui::TaskDlgBooleanParameters - + Empty body list 清空主體清單 - + The body list cannot be empty 主體列表不能空白 - + Boolean: Accept: Input error 布林值: 接受: 輸出錯誤 @@ -1703,13 +1703,13 @@ If zero, it is equal to Radius2 PartDesignGui::TaskExtrudeParameters - + No face selected 無選定之面 - + Face 面 @@ -1719,63 +1719,63 @@ If zero, it is equal to Radius2 移除 - + Preview 預覽 - + Select Faces Select Faces - + Select reference… Select reference… - + No shape selected 無選取物件 - + Sketch normal 草圖法線 - + Face normal 面法線 - - + + Custom direction 自訂方向 - + Click on a shape in the model 點擊模型中的形狀 - + One sided One sided - + Two sided Two sided - + Symmetric 對稱 - + Click on a face in the model 點擊模型中的一個面 @@ -3186,50 +3186,49 @@ measured along the specified direction 錯誤 - + Several sub-elements selected 多個次元素被選取 - + Select a single face as support for a sketch! Select a single face as support for a sketch! - + Select a face as support for a sketch! Select a face as support for a sketch! - + Need a planar face as support for a sketch! Need a planar face as support for a sketch! - + Create a plane first or select a face to sketch on Create a plane first or select a face to sketch on - + No support face selected 未選取基礎面 - + No planar support 無平面之基礎面 - + No valid planes in this document 在本文件的非法平面 - + - A dialog is already open in the task panel @@ -3272,9 +3271,8 @@ measured along the specified direction - + - Close this dialog? @@ -3670,7 +3668,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Migrate Manually - + Edit Boolean Edit Boolean diff --git a/src/Mod/Points/Gui/Resources/translations/Points.ts b/src/Mod/Points/Gui/Resources/translations/Points.ts index f763730cff..e7773ee6be 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points - + Convert to Points - + Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points - + Export Points… - - + + Exports a point cloud @@ -59,17 +59,17 @@ CmdPointsMerge - + Points - + Merge Point Clouds - + Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points - + Cut Point Cloud - + Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points - + Structured Point Cloud - + Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points - + Transform Points - + Performs tests to transform a point cloud @@ -136,12 +136,12 @@ - + Transform points - + Convert to points @@ -286,33 +286,33 @@ QObject - + Point formats - + All Files - + Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance - + Enter maximum distance: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_be.ts b/src/Mod/Points/Gui/Resources/translations/Points_be.ts index c4cff429dd..a48f8e811c 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_be.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_be.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Кропкі - + Convert to Points Пераўтварыць у кропкі - + Converts to points Пераўтварае ў кропкі @@ -22,18 +22,18 @@ CmdPointsExport - + Points Кропкі - + Export Points… Экспартаваць кропкі… - - + + Exports a point cloud Экспарт воблака кропак @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Кропкі - + Merge Point Clouds Аб'яднаць воблака кропак - + Merges several point clouds into one Аб'ядноўвае некалькі воблакаў кропак у адно воблака @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Кропкі - + Cut Point Cloud Выразаць воблака кропак - + Cuts a point cloud with a selected polygon Выразаць воблака кропак, якое абмежавана абраным шматкутнікам @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Кропкі - + Structured Point Cloud Воблакі структураваных кропак - + Converts points to a structured point cloud Пераўтварае кропкі ў воблака структураваных кропак @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Кропкі - + Transform Points Пераўтварэнне Кропак - + Performs tests to transform a point cloud Выконвае тэсты для пераўтварэння воблака кропак @@ -136,12 +136,12 @@ Імпарт кропак - + Transform points Пераўтварэнне кропак - + Convert to points Пераўтварыць у кропкі @@ -286,34 +286,34 @@ QObject - + Point formats Фарматы кропкі - + All Files Усе файлы - + Points not at Origin Кропкі, якія не знаходзяцца ў пачатку каардынат - + The bounding box of the imported points does not contain the origin. Translate it to the origin? Габарыты імпартаваных кропак не змяшчаюць кропку пачатка каардынат. Ці перанесці яе ў пачатак каардынат? - + Distance Адлегласць - + Enter maximum distance: Увядзіце найбольшую адлегласць: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ca.ts b/src/Mod/Points/Gui/Resources/translations/Points_ca.ts index a006677727..a656065d0f 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ca.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ca.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Punts - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Punts - + Export Points… Export Points… - - + + Exports a point cloud Exporta un núvol de punts @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Punts - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Punts - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Punts - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Punts - + Transform Points Transforma els punts - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importa els punts - + Transform points Transforma els punts - + Convert to points Convertir en punts @@ -286,33 +286,33 @@ QObject - + Point formats Formats de punt - + All Files Tots els fitxers - + Points not at Origin Els punts no estan a l'origen - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distància - + Enter maximum distance: Introduïu la distància màxima: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_cs.ts b/src/Mod/Points/Gui/Resources/translations/Points_cs.ts index e450936dab..1b289f1051 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_cs.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_cs.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Body - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Body - + Export Points… Export Points… - - + + Exports a point cloud Export množiny bodů @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Body - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Body - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Body - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Body - + Transform Points Transfomovat body - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importovat body - + Transform points Transformovat body - + Convert to points Převést na body @@ -286,33 +286,33 @@ QObject - + Point formats Formáty bodů - + All Files Všechny soubory - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Vzdálenost - + Enter maximum distance: Zadejte maximální vzdálenost: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_de.ts b/src/Mod/Points/Gui/Resources/translations/Points_de.ts index 10d40e501c..943058bd40 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_de.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_de.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Punkte - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Punkte - + Export Points… - Export Points… + Punkte exportieren… - - + + Exports a point cloud Exportiert eine Punktwolke @@ -48,7 +48,7 @@ Import Points… - Import Points… + Punkte importieren… @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Punkte - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Punkte - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Punkte - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Punkte - + Transform Points Punkte transformieren - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Punkte importieren - + Transform points Punkte transformieren - + Convert to points Wandelt ausgewählte Objekte in Punkte um @@ -286,33 +286,33 @@ QObject - + Point formats Punkt-Formate - + All Files Alle Dateien - + Points not at Origin Punkte nicht am Ursprung - + The bounding box of the imported points does not contain the origin. Translate it to the origin? Der Begrenzungsrahmen der importierten Punkte enthält den Ursprung nicht. Zum Ursprung verschieben? - + Distance Entfernung - + Enter maximum distance: Maximale Entfernung eingeben: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_el.ts b/src/Mod/Points/Gui/Resources/translations/Points_el.ts index bf4c6b7b19..4445e27096 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_el.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_el.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Σημεία - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Σημεία - + Export Points… Export Points… - - + + Exports a point cloud Πραγματοποιεί εξαγωγή ενός νέφους σημείων @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Σημεία - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Σημεία - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Σημεία - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Σημεία - + Transform Points Μετατόπιση Σημείων - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Import points - + Transform points Μετατόπιση Σημείων - + Convert to points Μετατροπή σε σημεία @@ -286,33 +286,33 @@ QObject - + Point formats Μορφές σημείων - + All Files Όλα τα Αρχεία - + Points not at Origin Σημεία που δεν προέρχονται από την αρχική - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Απόσταση - + Enter maximum distance: Εισαγωγή μέγιστης απόστασης: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_es-ES.ts b/src/Mod/Points/Gui/Resources/translations/Points_es-ES.ts index 7175598a3a..02a0e7c12f 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_es-ES.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_es-ES.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Puntos - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Puntos - + Export Points… Export Points… - - + + Exports a point cloud Exporta una nube de puntos @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Puntos - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Puntos - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Puntos - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Puntos - + Transform Points Trasformar puntos - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importar puntos - + Transform points Transformar puntos - + Convert to points Convertir a puntos @@ -286,33 +286,33 @@ QObject - + Point formats Formatos de los puntos - + All Files Todos los Archivos - + Points not at Origin Puntos no en el origen - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distancia - + Enter maximum distance: Pon la distancia máxima: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_eu.ts b/src/Mod/Points/Gui/Resources/translations/Points_eu.ts index 83de38215b..170c8051c1 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_eu.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_eu.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Puntuak - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Puntuak - + Export Points… Export Points… - - + + Exports a point cloud Esportatu puntuen hodei bat @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Puntuak - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Puntuak - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Puntuak - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Puntuak - + Transform Points Transformatu puntuak - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Inportatu puntuak - + Transform points Transformatu puntuak - + Convert to points Bihurtu puntuetara @@ -286,33 +286,33 @@ QObject - + Point formats Puntu-formatuak - + All Files Fitxategi guztiak - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distantzia - + Enter maximum distance: Sartu distantzia maximoa: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fi.ts b/src/Mod/Points/Gui/Resources/translations/Points_fi.ts index b7e97ae5ed..4273313b4d 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_fi.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_fi.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Pisteet - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Pisteet - + Export Points… Export Points… - - + + Exports a point cloud Vie pistepilven @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Pisteet - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Pisteet - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Pisteet - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Pisteet - + Transform Points Muunna pisteet - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Tuo pisteet - + Transform points Muuta pisteet - + Convert to points Muunna pisteiksi @@ -286,33 +286,33 @@ QObject - + Point formats Pisteen muodot - + All Files Kaikki tiedostot - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Etäisyys - + Enter maximum distance: Syötä enimmäisetäisyys: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_fr.ts b/src/Mod/Points/Gui/Resources/translations/Points_fr.ts index e9038bd631..6edfa12177 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_fr.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_fr.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Points - + Convert to Points Convertir en points - + Converts to points Convertir en points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Points - + Export Points… Exporter les points… - - + + Exports a point cloud Exporter un nuage de points @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Points - + Merge Point Clouds Fusionner des nuages de points - + Merges several point clouds into one Fusionner plusieurs nuages de points en un seul @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Points - + Cut Point Cloud Couper un nuage de points - + Cuts a point cloud with a selected polygon Couper un nuage de points à l'aide d'un polygone sélectionné @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Points - + Structured Point Cloud Convertir en un nuage de points structuré - + Converts points to a structured point cloud Convertir des points en un nuage de points structuré @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Points - + Transform Points Transformer les points - + Performs tests to transform a point cloud Effectuer des tests pour transformer un nuage de points @@ -136,12 +136,12 @@ Importer des points - + Transform points Transformer des points - + Convert to points Convertir en points @@ -286,33 +286,33 @@ QObject - + Point formats Formats des points - + All Files Tous les fichiers - + Points not at Origin Les points ne sont pas à l'origine. - + The bounding box of the imported points does not contain the origin. Translate it to the origin? La boîte englobante des points importés ne contient pas l'origine. Faut-il la déplacée à l'origine ? - + Distance Distance - + Enter maximum distance: Entrer la distance maximale : diff --git a/src/Mod/Points/Gui/Resources/translations/Points_hr.ts b/src/Mod/Points/Gui/Resources/translations/Points_hr.ts index 7516bbeaeb..72d8c8a964 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_hr.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_hr.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Točke - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Točke - + Export Points… Export Points… - - + + Exports a point cloud prenesi pokazni oblak @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Točke - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Točke - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Točke - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Točke - + Transform Points Promijeni točke - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Uvoz točaka - + Transform points Transformacija točaka - + Convert to points Pretvori u točke @@ -286,33 +286,33 @@ QObject - + Point formats Formati točaka - + All Files Sve datoteke - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Udaljenost - + Enter maximum distance: Unesite maksimalnu udaljenost: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_hu.ts b/src/Mod/Points/Gui/Resources/translations/Points_hu.ts index 9df71b550e..4ca349f407 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_hu.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_hu.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Pontok - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Pontok - + Export Points… Export Points… - - + + Exports a point cloud Pontfelhő exportálása @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Pontok - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Pontok - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Pontok - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Pontok - + Transform Points Pontok átalakítása - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Pontokat importál - + Transform points Pontokat alakít át - + Convert to points Pontokká alakít @@ -286,33 +286,33 @@ QObject - + Point formats Pont formátumok - + All Files Összes fájl - + Points not at Origin Pontok nem a kiindulási helyen vannak - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Távolság - + Enter maximum distance: Maximális távolság beírása: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_it.ts b/src/Mod/Points/Gui/Resources/translations/Points_it.ts index b05f0d0b5e..a1b99f7380 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_it.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_it.ts @@ -4,36 +4,36 @@ CmdPointsConvert - + Points Punti - + Convert to Points - Convert to Points + Converti in Punti - + Converts to points - Converts to points + Converte in punti CmdPointsExport - + Points Punti - + Export Points… - Export Points… + Esporta Punti… - - + + Exports a point cloud Esporta una nuvola di punti @@ -48,7 +48,7 @@ Import Points… - Import Points… + Importa Punti… @@ -59,53 +59,53 @@ CmdPointsMerge - + Points Punti - + Merge Point Clouds - Merge Point Clouds + Unisci Nuvole Punti - + Merges several point clouds into one - Merges several point clouds into one + Unisce diverse nuvole di punti in una sola CmdPointsPolyCut - + Points Punti - + Cut Point Cloud - Cut Point Cloud + Taglia Nuvola Punti - + Cuts a point cloud with a selected polygon - Cuts a point cloud with a selected polygon + Taglia una nuvola di punti con un poligono selezionato CmdPointsStructure - + Points Punti - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Punti - + Transform Points Trasforma punti - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importa punti - + Transform points Trasforma punti - + Convert to points Converti in punti @@ -286,33 +286,33 @@ QObject - + Point formats Formato dei punti - + All Files Tutti i file - + Points not at Origin Punti non all'origine - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distanza - + Enter maximum distance: Immettere la distanza massima: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ja.ts b/src/Mod/Points/Gui/Resources/translations/Points_ja.ts index 0d168598db..84057e5995 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ja.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ja.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points 点群 - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points 点群 - + Export Points… Export Points… - - + + Exports a point cloud 点群をエクスポート @@ -59,17 +59,17 @@ CmdPointsMerge - + Points 点群 - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points 点群 - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points 点群 - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points 点群 - + Transform Points 点群を変換 - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ 点群をインポート - + Transform points 点群を変換 - + Convert to points 点に変換 @@ -286,33 +286,33 @@ QObject - + Point formats 点群の形式 - + All Files すべてのファイル - + Points not at Origin 原点にない点群 - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance 距離 - + Enter maximum distance: 最大距離を入力： diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ka.ts b/src/Mod/Points/Gui/Resources/translations/Points_ka.ts index a40f64d416..37be7c3928 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ka.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ka.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points წერტილები - + Convert to Points წერტილებად გარდაქმნა - + Converts to points გადაიყვანს წერტილებში @@ -22,18 +22,18 @@ CmdPointsExport - + Points წერტილები - + Export Points… წერტილების გატანა… - - + + Exports a point cloud წერტილების ღრუბლის გატანა @@ -59,17 +59,17 @@ CmdPointsMerge - + Points წერტილები - + Merge Point Clouds წერტილის ღრუბლების შერწყმა - + Merges several point clouds into one შეაერთებს რამდენიმე წერტილის ღრუბელს ერთში @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points წერტილები - + Cut Point Cloud წერტილების ღრუბლის ამოჭრა - + Cuts a point cloud with a selected polygon წერტილების ღრუბლის მონიშნული პოლიგონით ამოჭრა @@ -95,17 +95,17 @@ CmdPointsStructure - + Points წერტილები - + Structured Point Cloud დალაგებული წერტილების ღრუბელი - + Converts points to a structured point cloud წერტილების დალაგებული წერტილების ღრუბლად გარდაქმნა @@ -113,17 +113,17 @@ CmdPointsTransform - + Points წერტილები - + Transform Points წერტლების გარდაქმნა - + Performs tests to transform a point cloud წერტილების ღრუბლად გარდაქმნის ტესტი @@ -136,12 +136,12 @@ წერტილების შემოტანა - + Transform points წერტლების გარდაქმნა - + Convert to points წერტილებად გარდაქმნა @@ -286,33 +286,33 @@ QObject - + Point formats წერტილის ფორმატები - + All Files ყველა ფაილი - + Points not at Origin წერტილები კოორდინატების საწყისისთან არაა - + The bounding box of the imported points does not contain the origin. Translate it to the origin? შემოტანილი წერტილების შემომსაზღვრელი ჩარჩო კოორდინატების საწყისს არ შეიცავს. გნებავთ მისი მოძრაობითი გადატანა კოორდინატების საწყისთან? - + Distance დაშორება - + Enter maximum distance: შეიყვანეთ მაქსიმალური მანძილი: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ko.ts b/src/Mod/Points/Gui/Resources/translations/Points_ko.ts index 26a1b560f4..fb2a68c424 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ko.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ko.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points 점 - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points 점 - + Export Points… Export Points… - - + + Exports a point cloud 점 집합을 추출한다 @@ -59,17 +59,17 @@ CmdPointsMerge - + Points 점 - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points 점 - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points 점 - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points 점 - + Transform Points 점 변환 - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ 점 가져오기 - + Transform points 점 변환 - + Convert to points 점으로 변환 @@ -286,33 +286,33 @@ QObject - + Point formats 점 표현방식들 - + All Files 모든 파일 - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance 거리 - + Enter maximum distance: 최대 거리를 입력 diff --git a/src/Mod/Points/Gui/Resources/translations/Points_nl.ts b/src/Mod/Points/Gui/Resources/translations/Points_nl.ts index a7188d74b6..640f8fa451 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_nl.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_nl.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Punten - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Punten - + Export Points… Export Points… - - + + Exports a point cloud Exporteert een puntenwolk @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Punten - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Punten - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Punten - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Punten - + Transform Points Transformeer Punten - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importeer punten - + Transform points Transformeer punten - + Convert to points Converteer naar punten @@ -286,33 +286,33 @@ QObject - + Point formats Puntformaten - + All Files Alle bestanden - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Afstand - + Enter maximum distance: Geef maximale afstand op: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pl.ts b/src/Mod/Points/Gui/Resources/translations/Points_pl.ts index bcf78a8e72..85ab21773d 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_pl.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_pl.ts @@ -4,36 +4,36 @@ CmdPointsConvert - + Points Punkty - + Convert to Points - Convert to Points + Przekształć do punktów - + Converts to points - Converts to points + Przekształca do punktów CmdPointsExport - + Points Tylko punkty - + Export Points… - Export Points… + Eksportuj punkty… - - + + Exports a point cloud Eksportuje chmurę punktów @@ -48,7 +48,7 @@ Import Points… - Import Points… + Importuj punkty… @@ -59,73 +59,73 @@ CmdPointsMerge - + Points Tylko punkty - + Merge Point Clouds - Merge Point Clouds + Scal chmury punktów - + Merges several point clouds into one - Merges several point clouds into one + Scala kilka chmur punktów w jedną CmdPointsPolyCut - + Points Punkty - + Cut Point Cloud - Cut Point Cloud + Przetnij chmurę punktów - + Cuts a point cloud with a selected polygon - Cuts a point cloud with a selected polygon + Przecina chmurę punktów wybranym wielokątem CmdPointsStructure - + Points Punkty - + Structured Point Cloud - Structured Point Cloud + Uporządkowana chmura punktów - + Converts points to a structured point cloud - Converts points to a structured point cloud + Przekształca punkty do uporządkowanej chmury punktów CmdPointsTransform - + Points Punkty - + Transform Points Przekształć Punkty - + Performs tests to transform a point cloud - Performs tests to transform a point cloud + Przeprowadza testy w celu przekształcenia chmury punktów @@ -136,12 +136,12 @@ Importuj punkty - + Transform points Przekształć punkty - + Convert to points Konwertuj na punkty @@ -187,7 +187,7 @@ ASCII Points Import - ASCII Points Import + Import punktów ASCII @@ -197,44 +197,44 @@ Special Lines - Special Lines + Linie specjalne First Line - First Line + Pierwsza linia Cluster by lines starting with - Cluster by lines starting with + Grupuj według linii zaczynających się od Ignore lines starting with - Ignore lines starting with + Ignoruj ​​linie zaczynające się od Point Format - Point Format + Format punktu Number separator - Number separator + Separator dziesiętny Points format - Points format + Format punktów Next block - Next block + Następny blok @@ -269,12 +269,12 @@ I (gray value) - I (gray value) + I (wartość szara) Number of previewed lines - Number of previewed lines + Liczba podglądanych linii @@ -286,33 +286,33 @@ QObject - + Point formats Formaty punktu - + All Files Wszystkie pliki - + Points not at Origin Punkty poza początkiem - + The bounding box of the imported points does not contain the origin. Translate it to the origin? - The bounding box of the imported points does not contain the origin. Translate it to the origin? + Ramka otaczająca importowanych punktów nie zawiera początku. Czy chcesz przesunąć ją do początku? - + Distance Odległość - + Enter maximum distance: Największa odległość: @@ -322,7 +322,7 @@ Points Tools - Points Tools + Narzędzia punktów diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.ts b/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.ts index d98c1fa4fa..e3c3d99dd0 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_pt-BR.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Pontos - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Pontos - + Export Points… Export Points… - - + + Exports a point cloud Exporta uma nuvem de pontos @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Pontos - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Pontos - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Pontos - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Pontos - + Transform Points Transformar pontos - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importar pontos - + Transform points Transformar pontos - + Convert to points Converter em pontos @@ -286,33 +286,33 @@ QObject - + Point formats Formatos de pontos - + All Files Todos os Arquivos - + Points not at Origin Pontos que estão fora da origem - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distância - + Enter maximum distance: Digite a distância máxima: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ro.ts b/src/Mod/Points/Gui/Resources/translations/Points_ro.ts index 2ec14751be..d101ea298a 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ro.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ro.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Puncte - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Puncte - + Export Points… Export Points… - - + + Exports a point cloud Exportă un nor de puncte @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Puncte - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Puncte - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Puncte - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Puncte - + Transform Points Transformaţi Punctele - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importă puncte - + Transform points Transformă puncte - + Convert to points Conversia în puncte @@ -286,33 +286,33 @@ QObject - + Point formats Formate de puncte - + All Files Toate fișierele - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distanță - + Enter maximum distance: Introduceţi distanţa maximă: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_ru.ts b/src/Mod/Points/Gui/Resources/translations/Points_ru.ts index 42b218ef6d..4cd8b70376 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_ru.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_ru.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Точки - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Точки - + Export Points… Export Points… - - + + Exports a point cloud Экспортировать облако точек @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Точки - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Точки - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Точки - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Точки - + Transform Points Преобразование точек - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Импортировать точки - + Transform points Преобразовать точки - + Convert to points Преобразовать в точки @@ -286,33 +286,33 @@ QObject - + Point formats Форматы точек - + All Files Все файлы - + Points not at Origin Точки не в начале координат - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Расстояние - + Enter maximum distance: Введите максимальное расстояние: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sl.ts b/src/Mod/Points/Gui/Resources/translations/Points_sl.ts index a85d5768c3..17cf882259 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_sl.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_sl.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Točke - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Točke - + Export Points… Export Points… - - + + Exports a point cloud Izvozi točkovni oblak @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Točke - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Točke - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Točke - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Točke - + Transform Points Preoblikuj točke - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Uvozi točke - + Transform points Preoblikuj točke - + Convert to points Pretvori v točke @@ -286,33 +286,33 @@ QObject - + Point formats Formati točk - + All Files Vse datoteke - + Points not at Origin Točke niso v izhodišču - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Razdalja - + Enter maximum distance: Vnesite največjo razdaljo: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sr-CS.ts b/src/Mod/Points/Gui/Resources/translations/Points_sr-CS.ts index e7cfc75014..0c6e9a406f 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_sr-CS.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_sr-CS.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Tačke - + Convert to Points Pretvori u tačke - + Converts to points Pretvori u tačke @@ -22,18 +22,18 @@ CmdPointsExport - + Points Tačke - + Export Points… Izvezi tačke… - - + + Exports a point cloud Izvozi oblak tačaka @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Tačke - + Merge Point Clouds Objedini oblake tačaka - + Merges several point clouds into one Objedini nekoliko oblaka tačaka u jedan @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Tačke - + Cut Point Cloud Iseci oblak tačaka - + Cuts a point cloud with a selected polygon Iseci oblaka tačaka sa izabranim mnogouglom @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Tačke - + Structured Point Cloud Strukturirani oblak tačaka - + Converts points to a structured point cloud Pretvori tačke u strukturirani oblak tačaka @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Tačke - + Transform Points Transformiši Tačke - + Performs tests to transform a point cloud Test za transformisanje oblaka tačaka @@ -136,12 +136,12 @@ Uvezi tačke - + Transform points Transformiši tačke - + Convert to points Pretvori u tačke @@ -286,33 +286,33 @@ QObject - + Point formats Formati tačke - + All Files Sve datoteke - + Points not at Origin Tačke nisu u koordinatnom početku - + The bounding box of the imported points does not contain the origin. Translate it to the origin? Koordinatni početak se ne nalazi unutar granične kutije uvezenih tačaka. Da li želiš da ih pomerim u koordinatni početak? - + Distance Rastojanje - + Enter maximum distance: Unesi maksimalno rastojanje: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sr.ts b/src/Mod/Points/Gui/Resources/translations/Points_sr.ts index fabcb55fec..bfec954403 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_sr.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_sr.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Тачке - + Convert to Points Претвори у тачке - + Converts to points Претвори у тачке @@ -22,18 +22,18 @@ CmdPointsExport - + Points Тачке - + Export Points… Извези тачке… - - + + Exports a point cloud Извози облак тачака @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Тачке - + Merge Point Clouds Обједини облаке тачака - + Merges several point clouds into one Обједини неколико облака тачака у један @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Тачке - + Cut Point Cloud Исеци облак тачака - + Cuts a point cloud with a selected polygon Исеци облак тачака са изабраним многоуглом @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Тачке - + Structured Point Cloud Cтруктурирани облак тачака - + Converts points to a structured point cloud Претвори тачке у структурирани облак тачака @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Тачке - + Transform Points Трансформиши Тачке - + Performs tests to transform a point cloud Тест за трансформисање облака тачака @@ -136,12 +136,12 @@ Увези тачке - + Transform points Трансформиши тачке - + Convert to points Претвори у тачке @@ -286,33 +286,33 @@ QObject - + Point formats Формати тачке - + All Files Све датотеке - + Points not at Origin Тачке нису у координатном почетку - + The bounding box of the imported points does not contain the origin. Translate it to the origin? Координатни почетак се не налази унутар граничне кутије увезених тачака. Да ли желиш да их померим у координатни почетак? - + Distance Растојање - + Enter maximum distance: Унеси максимално растојање: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.ts b/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.ts index 570949b8c6..15484e7365 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_sv-SE.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Punkter - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Punkter - + Export Points… Export Points… - - + + Exports a point cloud Exporterar ett punktmoln @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Punkter - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Punkter - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Punkter - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Punkter - + Transform Points Omvandla punkter - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Importera punkter - + Transform points Omvandla punkter - + Convert to points Omvandla till punkter @@ -286,33 +286,33 @@ QObject - + Point formats Punkt-format - + All Files Alla filer - + Points not at Origin Poäng inte vid Ursprung - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Distans - + Enter maximum distance: Ange maximalt avstånd: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_tr.ts b/src/Mod/Points/Gui/Resources/translations/Points_tr.ts index ae28592840..d567b7dbe0 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_tr.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_tr.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Noktalar - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Noktalar - + Export Points… Export Points… - - + + Exports a point cloud Bir nokta bulutunu dışarı aktarır @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Noktalar - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Noktalar - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Noktalar - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Noktalar - + Transform Points Noktaları dönüştür - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Noktaları içeri aktar - + Transform points Noktaları dönüştürün - + Convert to points Noktalarına dönüştür @@ -286,33 +286,33 @@ QObject - + Point formats Nokta biçimleri - + All Files Tüm Dosyalar - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Uzaklık - + Enter maximum distance: Maksimum uzaklığı girin: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_uk.ts b/src/Mod/Points/Gui/Resources/translations/Points_uk.ts index d288694728..81ed6997d8 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_uk.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_uk.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points Точки - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points Точки - + Export Points… Export Points… - - + + Exports a point cloud Експорт хмари точок @@ -59,17 +59,17 @@ CmdPointsMerge - + Points Точки - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points Точки - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points Точки - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points Точки - + Transform Points Перетворення точок - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ Імпортувати точки - + Transform points Трансформувати точки - + Convert to points Конвертувати в точки @@ -286,33 +286,33 @@ QObject - + Point formats Формат точок - + All Files Всі файли - + Points not at Origin Вказує не на джерело - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance Відстань - + Enter maximum distance: Введіть максимальну відстань: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.ts b/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.ts index 8d1bbb3918..f5b5358b9f 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_zh-CN.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points 点 - + Convert to Points 转换为点 - + Converts to points 转换为点 @@ -22,18 +22,18 @@ CmdPointsExport - + Points 点 - + Export Points… 导出点… - - + + Exports a point cloud 导出点云 @@ -59,17 +59,17 @@ CmdPointsMerge - + Points 点 - + Merge Point Clouds 合并点云 - + Merges several point clouds into one 将多个点云合并为一个 @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points 点 - + Cut Point Cloud 切割点云 - + Cuts a point cloud with a selected polygon 使用选定的多边形切割点云 @@ -95,17 +95,17 @@ CmdPointsStructure - + Points 点 - + Structured Point Cloud 结构化点云 - + Converts points to a structured point cloud 将点转换为结构化点云 @@ -113,17 +113,17 @@ CmdPointsTransform - + Points 点 - + Transform Points 变换点 - + Performs tests to transform a point cloud 执行测试以变换点云 @@ -136,12 +136,12 @@ 导入点 - + Transform points 变换点 - + Convert to points 转换为点 @@ -286,33 +286,33 @@ QObject - + Point formats 点格式 - + All Files 所有文件 - + Points not at Origin 点不在原点 - + The bounding box of the imported points does not contain the origin. Translate it to the origin? 导入点的边界框不包含原点。是否要将其平移至原点？ - + Distance 距离 - + Enter maximum distance: 输入的最大距离： diff --git a/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.ts b/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.ts index c6b90f90af..b62d2e86f0 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_zh-TW.ts @@ -4,17 +4,17 @@ CmdPointsConvert - + Points 點 - + Convert to Points Convert to Points - + Converts to points Converts to points @@ -22,18 +22,18 @@ CmdPointsExport - + Points 點 - + Export Points… Export Points… - - + + Exports a point cloud 匯出點雲 @@ -59,17 +59,17 @@ CmdPointsMerge - + Points 點 - + Merge Point Clouds Merge Point Clouds - + Merges several point clouds into one Merges several point clouds into one @@ -77,17 +77,17 @@ CmdPointsPolyCut - + Points 點 - + Cut Point Cloud Cut Point Cloud - + Cuts a point cloud with a selected polygon Cuts a point cloud with a selected polygon @@ -95,17 +95,17 @@ CmdPointsStructure - + Points 點 - + Structured Point Cloud Structured Point Cloud - + Converts points to a structured point cloud Converts points to a structured point cloud @@ -113,17 +113,17 @@ CmdPointsTransform - + Points 點 - + Transform Points 切換點 - + Performs tests to transform a point cloud Performs tests to transform a point cloud @@ -136,12 +136,12 @@ 匯入點 - + Transform points 轉換點 - + Convert to points 轉換為點 @@ -286,33 +286,33 @@ QObject - + Point formats 點格式 - + All Files 所有檔案 - + Points not at Origin Points not at Origin - + The bounding box of the imported points does not contain the origin. Translate it to the origin? The bounding box of the imported points does not contain the origin. Translate it to the origin? - + Distance 距離 - + Enter maximum distance: 輸入最大距離： diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts index 832bac410b..ea9ef2533d 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts @@ -16,7 +16,7 @@ Approximates a cylinder - Approximates a cylinder + Aproksymuje walec @@ -34,7 +34,7 @@ Approximates a plane - Approximates a plane + Aproksymuje płaszczyznę @@ -47,12 +47,12 @@ Polynomial Surface - Polynomial Surface + Powierzchnia wielomianowa Approximates a polynomial surface - Approximates a polynomial surface + Aproksymuje powierzchnię wielomianową @@ -70,7 +70,7 @@ Approximates a sphere - Approximates a sphere + Aproksymuje sferę @@ -83,12 +83,12 @@ Approximate B-Spline Surface… - Approximate B-Spline Surface… + Aproksymuj powierzchnię z krzywych złożonych… Approximates a B-spline surface - Approximates a B-spline surface + Aproksymuje powierzchnię z krzywych złożonych @@ -101,12 +101,12 @@ Wire From Mesh Boundary… - Wire From Mesh Boundary… + Polilinia z brzegów siatki… Creates a wire from mesh boundaries - Creates a wire from mesh boundaries + Tworzy polilinię z brzegów siatki @@ -119,12 +119,12 @@ Poisson… - Poisson… + Poisson… Performs Poisson surface reconstruction - Performs Poisson surface reconstruction + Dokonuje rekonstrukcji powierzchni Poissona @@ -137,12 +137,12 @@ Mesh Segmentation… - Mesh Segmentation… + Segmentacja siatki… Creates separate mesh segments based on surface types - Creates separate mesh segments based on surface types + Tworzy oddzielne segmenty siatki w oparciu o typy powierzchni @@ -155,12 +155,12 @@ From Components - From Components + Z komponentów Creates mesh segments from components - Creates mesh segments from components + Tworzy segmenty siatki z komponentów @@ -173,12 +173,12 @@ Manual Segmentation… - Manual Segmentation… + Ręczna segmentacja… Creates mesh segments manually - Creates mesh segments manually + Tworzy segmenty siatki ręcznie @@ -191,12 +191,12 @@ Structured Point Clouds - Structured Point Clouds + Uporządkowane chmury punktów Triangulates structured point clouds - Triangulates structured point clouds + Triangulacja uporządkowanych chmur punktów @@ -270,17 +270,17 @@ Fit B-Spline Surface - Fit B-Spline Surface + Dopasuj powierzchnię z krzywej złożonej U-Direction - U-Direction + Kierunek U V-Direction - V-Direction + Kierunek V @@ -305,12 +305,12 @@ Create Placement - Create Placement + Utwórz umiejscowienie Total weight - Total weight + Ciężar całkowity @@ -349,7 +349,7 @@ Select a single placement object to get the local orientation. - Select a single placement object to get the local orientation. + Wybierz pojedynczy obiekt umiejscowienia, aby uzyskać lokalną orientację. @@ -397,17 +397,17 @@ Select a point cloud. - Select a point cloud. + Wybierz chmurę punktów. Select a point cloud or mesh. - Select a point cloud or mesh. + Wybierz chmurę punktów lub siatkę. Select a single point cloud. - Select a single point cloud. + Wybierz pojedynczą chmurę punktów. @@ -423,7 +423,7 @@ Mesh Segmentation - Mesh Segmentation + Segmentacja siatki @@ -491,12 +491,12 @@ Manual Mesh Segmentation - Manual Mesh Segmentation + Ręczna segmentacja siatki Pick Triangle - Pick Triangle + Wybierz trójkąt @@ -547,12 +547,12 @@ Region Options - Region Options + Opcje regionu Respect only triangles with screen-facing normals - Respect only triangles with screen-facing normals + Akceptuj tylko trójkąty o kierunkach normalnych zwróconych w stronę ekranu @@ -596,7 +596,7 @@ Fit B-Spline Curve - Fit B-Spline Curve + Dopasuj krzywą złożoną @@ -709,12 +709,12 @@ Approximate B-Spline Curve… - Approximate B-Spline Curve… + Aproksymuj krzywą złożoną… Approximates a B-spline curve - Approximates a B-spline curve + Aproksymuje krzywą złożoną diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts index 7a17eac108..1f31cc00ee 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts @@ -299,7 +299,7 @@ Simulate Trajectory - Simulate Trajectory + Simula Traiettoria @@ -563,7 +563,7 @@ Hide/Show - Hide/Show + Nascondi/Mostra @@ -869,7 +869,7 @@ Speed & acceleration - Speed & acceleration + Velocità e accelerazione @@ -879,7 +879,7 @@ Acceleration - Acceleration + Accelerazione @@ -899,27 +899,27 @@ Position and orientation - Position and orientation + Posizione e orientamento Don not change position & orientation - Don not change position & orientation + Non cambiare posizione & orientamento Use orientation - Use orientation + Usa orientamento Add position - Add position + Aggiungi posizione Add orientation - Add orientation + Aggiungi orientamento @@ -937,7 +937,7 @@ Export Trajectory - Export Trajectory + Esporta Traiettoria diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts index 1038457ea1..460cd46035 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts @@ -16,7 +16,7 @@ Adds a tool shape to the robot - Adds a tool shape to the robot + Dodaje kształt narzędzia do robota @@ -29,12 +29,12 @@ Place Robot - Place Robot + Umieść robota Places a robot in the scene - Places a robot in the scene + Umieszcza robota na scenie @@ -52,7 +52,7 @@ Creates a new empty trajectory - Creates a new empty trajectory + Tworzy nową pustą trajektorię @@ -65,12 +65,12 @@ Edge to Trajectory - Edge to Trajectory + Krawędź na trajektorię Generates a trajectory from the selected edges - Generates a trajectory from the selected edges + Generuje trajektorię z wybranych krawędzi @@ -83,12 +83,12 @@ Kuka Compact Subroutine - Kuka Compact Subroutine + Kompaktowa podprocedura Kuka Exports the trajectory as a compact KRL subroutine - Exports the trajectory as a compact KRL subroutine + Eksportuje trajektorię jako kompaktową podprocedurę KRL @@ -101,12 +101,12 @@ Kuka Full Subroutine - Kuka Full Subroutine + Pełna podprocedura Kuka Exports the trajectory as a full KRL subroutine - Exports the trajectory as a full KRL subroutine + Eksportuje trajektorię jako pełną podprocedurę KRL @@ -124,7 +124,7 @@ Inserts a Kuka IR125 robot into the scene - Inserts a Kuka IR125 robot into the scene + Wstawia robota Kuka IR125 na scenę @@ -142,7 +142,7 @@ Inserts a Kuka IR16 robot into the scene - Inserts a Kuka IR16 robot into the scene + Wstawia robota Kuka IR16 na scenę @@ -160,7 +160,7 @@ Inserts a Kuka IR210 robot into the scene - Inserts a Kuka IR210 robot into the scene + Wstawia robota Kuka IR210 na scenę @@ -178,7 +178,7 @@ Inserts a Kuka IR500 into the document - Inserts a Kuka IR500 into the document + Wstawia Kuka IR500 do dokumentu @@ -191,12 +191,12 @@ Insert in Trajectory - Insert in Trajectory + Wstaw do trajektorii Inserts the robot tool location into the trajectory - Inserts the robot tool location into the trajectory + Wstawia lokalizację narzędzia robota do trajektorii @@ -209,12 +209,12 @@ Insert in Trajectory - Insert in Trajectory + Wstaw do trajektorii Inserts the preselection position into the trajectory (W) - Inserts the preselection position into the trajectory (W) + Wstawia pozycję preselekcji do trajektorii (W) @@ -227,12 +227,12 @@ Move to Home - Move to Home + Przejdź do pozycji startowej Moves to the home position - Moves to the home position + Przenosi się do pozycji startowej @@ -245,12 +245,12 @@ Set Default Orientation - Set Default Orientation + Ustaw domyślną orientację Sets the default orientation for subsequent commands for waypoint creation - Sets the default orientation for subsequent commands for waypoint creation + Ustawia domyślną orientację dla kolejnych poleceń do tworzenia punktów trasy @@ -263,12 +263,12 @@ Set Default Values - Set Default Values + Ustaw domyślne wartości Sets the default values for speed, acceleration, and continuity for subsequent commands of waypoint creation - Sets the default values for speed, acceleration, and continuity for subsequent commands of waypoint creation + Ustawia domyślne wartości prędkości, przyspieszenia i ciągłości dla kolejnych poleceń tworzenia punktów nawigacyjnych @@ -281,12 +281,12 @@ Set Home Position - Set Home Position + Ustaw pozycję startową Sets the home position - Sets the home position + Ustawia pozycję startową @@ -299,12 +299,12 @@ Simulate Trajectory - Simulate Trajectory + Symuluj trajektorię Simulates robot movement along a selected trajectory - Simulates robot movement along a selected trajectory + Symuluje ruch robota wzdłuż wybranej trajektorii @@ -317,12 +317,12 @@ Trajectory Compound - Trajectory Compound + Złożenie trajektorii Groups and connects multiple trajectories into one - Groups and connects multiple trajectories into one + Grupuje i łączy kilka trajektorii w jedną @@ -335,12 +335,12 @@ Dress-Up Trajectory - Dress-Up Trajectory + Trajektoria ulepszenia Creates a dress-up object that overrides aspects of a trajectory - Creates a dress-up object that overrides aspects of a trajectory + Tworzy obiekt ulepszenia, który nadpisuje pewne aspekty trajektorii @@ -348,12 +348,12 @@ Trajectory Tools - Trajectory Tools + Narzędzia trajektorii Robot Tools - Robot Tools + Narzędzia robota @@ -492,7 +492,7 @@ Visit %1 and copy the files to %2 - Visit %1 and copy the files to %2 + Odwiedź %1 i skopiuj pliki do %2 @@ -563,7 +563,7 @@ Hide/Show - Hide/Show + Ukryj/Pokaż @@ -578,7 +578,7 @@ Sizing Value - Sizing Value + Wartość zmiany rozmiaru @@ -869,7 +869,7 @@ Speed & acceleration - Speed & acceleration + Prędkość i przyspieszenie @@ -879,12 +879,12 @@ Acceleration - Acceleration + Przyspieszenie Do not change continuous mode - Do not change continuous mode + Nie zmieniaj trybu ciągłego @@ -899,27 +899,27 @@ Position and orientation - Position and orientation + Pozycja i orientacja Don not change position & orientation - Don not change position & orientation + Nie zmieniaj pozycji i orientacji Use orientation - Use orientation + Użyj orientacji Add position - Add position + Dodaj pozycję Add orientation - Add orientation + Dodaj orientację @@ -937,7 +937,7 @@ Export Trajectory - Export Trajectory + Eksportuj trajektorię diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 2e984cc94b..d303b51970 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -850,27 +850,27 @@ invalid constraints, and degenerate geometry - + Drag Point - + Drag Curve - + Drag geometries - + Drag Constraint - + Modify sketch constraints @@ -895,17 +895,17 @@ invalid constraints, and degenerate geometry - + Rotate geometries - + Scale geometries - + Translate geometries @@ -3082,48 +3082,49 @@ This setting is only for the toolbar. Whichever you choose, all tools are always - + Font size - + + px - + View scale ratio - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - + Segments per geometry - + Ask for value after creating a dimensional constraint - + Geometry creation "Continue Mode" - + Constraint creation "Continue Mode" - + Hide base length units for supported unit systems @@ -3133,118 +3134,133 @@ Supports all unit systems except 'US customary' and 'Building US/ - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + + Use custom constraint symbol size + + + + + Pixel size used to render constraint symbols + + + + Scales the 3D view based on this factor - + The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format - + %N = %V - + Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation - + Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3253,47 +3269,47 @@ Defaults to: %N = %V - + Use system decimals setting for cursor coordinates - + Hide all objects that depend on the sketch - + Show objects used for external geometry - + Show objects that the sketch is attached to - + Restore camera position after editing - + Force orthographic camera when entering edit - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - + Unexpected C++ exception - + Sketcher @@ -3853,119 +3869,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. - + The following constraint is partially redundant: - + The following constraints are partially redundant: - + Edit Sketch - + Close this dialog? - + Invalid Sketch - + Open the sketch validation tool? - + Remove the following constraint: - + Remove at least one of the following constraints: - + Remove the following redundant constraint: - + Remove the following redundant constraints: - + Remove the following malformed constraint: - + Remove the following malformed constraints: - + Empty sketch - + Over-constrained: - + Malformed constraints: - + Redundant constraints: - + Partially redundant: - + Solver failed to converge - + Under-constrained: - + %n Degrees of Freedom - + Fully constrained @@ -4439,7 +4455,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more @@ -4680,12 +4696,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error @@ -4819,11 +4835,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted @@ -4900,17 +4916,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - + Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + + + + Failed to scale - + Failed to translate @@ -5068,12 +5089,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - + Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. @@ -5437,7 +5458,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') @@ -5458,7 +5479,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) @@ -5479,7 +5500,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') @@ -5487,7 +5508,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') @@ -5630,12 +5651,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. @@ -7784,25 +7805,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint - + %1 set start angle Sketcher Rotate: hint - + %1 set rotation angle Sketcher Rotate: hint - + Rotate parameters @@ -7810,17 +7831,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point - + %1 set scale factor - + Scale parameters @@ -7869,24 +7890,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters - + %1 pick reference point Sketcher Translate: hint - + %1 set translation vector Sketcher Translate: hint - + %1 set second translation vector Sketcher Translate: hint diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts index a8a9164d27..b659bb99cf 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts @@ -850,27 +850,27 @@ invalid constraints, and degenerate geometry Пераназваць абмежаванні эскізу - + Drag Point Перацягнуць кропку - + Drag Curve Перацягнуць крывую - + Drag geometries Перацягнуць геаметрыю - + Drag Constraint Перацягнуць абмежаванні - + Modify sketch constraints Змяніць абмежаванні эскізу @@ -895,17 +895,17 @@ invalid constraints, and degenerate geometry Дадаць эскіз дугі паза - + Rotate geometries Павярнуць геаметрыі - + Scale geometries Маштабаваць геаметрыю - + Translate geometries Геаметрыя пераносу @@ -3106,49 +3106,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Праецыраванне - + Font size Памер шрыфту - + + px px - + View scale ratio Паказаць маштабны каэфіцыент - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Адзінкі вымярэння асноўнай даўжыні не будуць адлюстроўвацца ў абмежаваннях ці каардынатах паказальніка. Падтрымліваюцца ўсе сістэмы адзінак вымярэння, акрамя 'US customary' і 'Building US/Euro'. - + Segments per geometry Адрэзкі для геаметрыі - + Ask for value after creating a dimensional constraint Запытаць значэнне пасля стварэння памернага абмежавання - + Geometry creation "Continue Mode" Стварэнне геаметрыі "Бесперапынны рэжым" - + Constraint creation "Continue Mode" Стварэнне абмежавання "Бесперапынны рэжым" - + Hide base length units for supported unit systems Схаваць асноўныя адзінкі вымярэння даўжыні для сістэм адзінак вымярэння, якія падтрымліваюцца @@ -3158,119 +3159,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Паказаць імя памернага абмежавання ў фармаце - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3283,47 +3299,47 @@ Defaults to: %N = %V %V - значэнне вымярэння - + Use system decimals setting for cursor coordinates Ужыць сістэмную наладу для дзесятковых знакаў для каардынатаў паказальніка - + Hide all objects that depend on the sketch Схаваць усе аб'екты, якія залежаць ад эскіза - + Show objects used for external geometry Паказаць аб'екты, якія ўжываюцца для вонкавай геаметрыі - + Show objects that the sketch is attached to Паказаць аб'екты, да якіх прымацаваны эскіз - + Restore camera position after editing Аднавіць становішча камеры пасля змены - + Force orthographic camera when entering edit Прымусова ўжыць артаганальную камеру пры ўводзе змены - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Заўвага: першапачатковыя налады ўжываюцца на новых эскізах. Паводзіны запамінаюцца для кожнага эскіза паасобку як уласцівасці на ўкладцы Выгляд. - + Unexpected C++ exception Нечаканае выключэнне C++ - + Sketcher Варштат эскізу @@ -3890,112 +3906,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. Эскіз хібны і не можа быць зменены. - + The following constraint is partially redundant: Наступнае абмежаванне часткова залішняе: - + The following constraints are partially redundant: Наступныя абмежаванні часткова залішнія: - + Edit Sketch Edit Sketch - + Close this dialog? - Close this dialog? + Ці зачыніць дыялогавае акно? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Пусты эскіз - + Over-constrained: Празмерна-абмежаваны: - + Malformed constraints: Скажоныя абмежаванні: - + Redundant constraints: Залішнія абмежаванні: - + Partially redundant: Часткова залішнія: - + Solver failed to converge Сродку рашэння не атрымалася сысціся - + Under-constrained: Недастаткова абмежаваны: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4005,7 +4021,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Цалкам абмежаваны @@ -4487,7 +4503,7 @@ Eigen Sparse QR - аптымізаваны для разрэджаных мат ViewProviderSketch - + and %1 more і яшчэ %1 @@ -4731,12 +4747,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Памылка @@ -4871,11 +4887,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Выкананне інструмента перапынена @@ -4956,17 +4972,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Немагчыма дадаць эліпс - + Failed to rotate Не атрымалася павярнуць - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Не атрымалася маштабаваць - + Failed to translate Не атрымалася перанесці @@ -5124,12 +5145,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Выдаліць зыходныя геаметрыі (U) - + Apply equal constraints Прымяніць аднолькавыя абмежаванні - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Калі абрана, памерныя абмежаванні выключаюцца з аперацыі. @@ -5494,7 +5515,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Копіі (+'U'/-'J') @@ -5515,7 +5536,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Пакінуць зыходныя геаметрыі (U) @@ -5536,7 +5557,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Копіі (+'U'/-'J') @@ -5544,7 +5565,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Радкі (+'R'/-'F') @@ -5687,12 +5708,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Прымяніць аднолькавыя абмежаванні - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Калі абрана, памерныя абмежаванні выключаюцца з аперацыі. @@ -7844,25 +7865,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Налады павароту @@ -7870,17 +7891,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Налады маштабавання @@ -7929,24 +7950,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Налады пераносу - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index 064a0e0df7..4a789dc94d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Reanomena restricció del croquis - + Drag Point Arrossega el punt - + Drag Curve Arrossega la corba - + Drag geometries Arrossegar geometries - + Drag Constraint Arrossega la restricció - + Modify sketch constraints Modifica les restriccions del croquis @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Afegiu una ranura d'arc al croquis - + Rotate geometries Girar geometries - + Scale geometries Escalar geometries - + Translate geometries Tradueix geometries @@ -3099,48 +3099,49 @@ Aquesta configuració només és per a la barra d'eines. Trieu el que trieu, tot Visualització - + Font size Mida del tipus de lletra - + + px px - + View scale ratio Mostra la ràtio d'escalat - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Les unitats de longitud de base no es mostraran en les restriccions ni en les coordenades del cursor. És compatible amb tots els sistemes d'unitats, excepte el «Sistema anglosaxó d'unitats» i el «Building US / Euro». - + Segments per geometry Segments per geometria - + Ask for value after creating a dimensional constraint Demana el valor després de crear una restricció de dimensió - + Geometry creation "Continue Mode" Creació de geometria "Mode continu" - + Constraint creation "Continue Mode" Creació de la restricció «Mode continu» - + Hide base length units for supported unit systems Amaga les unitats de longitud de base del sistemes d'unitats compatibles @@ -3150,119 +3151,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Mostrar nom de la restricció de dimensió amb format - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3275,47 +3291,47 @@ Per defecte: %N = %V %V - valor de dimensió - + Use system decimals setting for cursor coordinates Utilitzar configuració de decimals del sistema per a les coordenades del cursor - + Hide all objects that depend on the sketch Amaga tots els objectes que depenen del croquis - + Show objects used for external geometry Mostra els objectes utilitzats per a la geometria externa - + Show objects that the sketch is attached to Mostra els objectes als quals el croquis està unit - + Restore camera position after editing Restaura la posició de la càmera després de l'edició - + Force orthographic camera when entering edit Forçar la vista ortogràfica de la càmera en entrar al mode edició - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Nota: aquests paràmetres són aplicats per defecte als nous croquis. El comportament és recordat per a cada croquis individualment, com a propietats a la pestanya Vista. - + Unexpected C++ exception S'ha produït una excepció inesperada de C++ - + Sketcher Esbossos @@ -3882,114 +3898,114 @@ Això es fa mitjançant l'anàlisi de les geometries i restriccions de l'esbós. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. El croquis no és vàlid i no es pot editar. - + The following constraint is partially redundant: La restricció següent és parcialment redundant: - + The following constraints are partially redundant: Les següents restriccions són parcialment redundants: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Croquis buit - + Over-constrained: Sobre-restringit: - + Malformed constraints: Restriccions mal formades: - + Redundant constraints: Restriccions redundants: - + Partially redundant: Parcialment redundant: - + Solver failed to converge El solucionador no ha pogut convergir - + Under-constrained: Sub-restringit: - + %n Degrees of Freedom %n Degrees of Freedom @@ -3997,7 +4013,7 @@ El solucionador no ha pogut convergir - + Fully constrained Esbós completament restringit @@ -4478,7 +4494,7 @@ L'algoritme Eigen Sparse QR està optimitzat per a matrius escasses; generalment ViewProviderSketch - + and %1 more i % 1 més @@ -4722,12 +4738,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Error @@ -4861,11 +4877,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted S'ha avortat l'execució de l'eina @@ -4942,17 +4958,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.No s'ha pogut afegir l'el·lipse - + Failed to rotate No s'ha pogut girar - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale No s'ha pogut escalar - + Failed to translate No s'ha pogut traslladar @@ -5110,12 +5131,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Eliminar geometries originals (U) - + Apply equal constraints Aplicar restriccions d'igualtat - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si aquesta opció està seleccionada, les restriccions de dimensió seran excloses de l'operació. @@ -5480,7 +5501,7 @@ En el seu lloc, s'aplicaran restriccions d'igualtat entre els objectes originals TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/-'J') @@ -5501,7 +5522,7 @@ En el seu lloc, s'aplicaran restriccions d'igualtat entre els objectes originals TaskSketcherTool_c1_scale - + Keep original geometries (U) Mantenir geometries originals (U) @@ -5522,7 +5543,7 @@ En el seu lloc, s'aplicaran restriccions d'igualtat entre els objectes originals TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Còpies (+'U'/-'J') @@ -5530,7 +5551,7 @@ En el seu lloc, s'aplicaran restriccions d'igualtat entre els objectes originals TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Files (+'R'/-'F') @@ -5673,12 +5694,12 @@ En el seu lloc, s'aplicaran restriccions d'igualtat entre els objectes originals TaskSketcherTool_c1_translate - + Apply equal constraints Aplicar restriccions d'igualtat - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si aquesta opció està seleccionada, les restriccions de dimensió seran excloses de l'operació. @@ -7830,25 +7851,25 @@ Els punts s’han d’establir més a prop que una cinquena part de l'espaiat de SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Paràmetres de rotació @@ -7856,17 +7877,17 @@ Els punts s’han d’establir més a prop que una cinquena part de l'espaiat de SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Paràmetres d'escalat @@ -7915,24 +7936,24 @@ Els punts s’han d’establir més a prop que una cinquena part de l'espaiat de SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Paràmetres de translació - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index 163246a80a..2bda15c183 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Přejmenovat vazbu náčrtu - + Drag Point Přetáhnout bod - + Drag Curve Přetáhnout křivku - + Drag geometries Drag geometries - + Drag Constraint Přetáhnout vazbu - + Modify sketch constraints Upravit vazby náčrtu @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Přidat náčrt obloukové drážky - + Rotate geometries Otočit geometrii - + Scale geometries Měřítko geometrie - + Translate geometries Posunout geometrii @@ -3104,49 +3104,50 @@ Toto nastavení je pouze pro panel nástrojů. Ať už si vyberete cokoliv, vše Zobrazení - + Font size Velikost písma - + + px px - + View scale ratio Měřítko pohledu - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Jednotky základní délky nebudou zobrazeny ve vazbách nebo souřadnicích kurzoru. Podporuje všechny jednotkové systémy kromě „US obvyklé“ a „Budování USA/Euro“. - + Segments per geometry Segmentů na geometrii - + Ask for value after creating a dimensional constraint Zeptat se na hodnotu při vytvoření vazby vzdálenosti - + Geometry creation "Continue Mode" Vytváření geometrie v "kontinuálním módu" - + Constraint creation "Continue Mode" Vytváření vazeb v "kontinuálním módu" - + Hide base length units for supported unit systems Skrýt základní délkové jednotky pro podporované jednotkové soustavy @@ -3156,119 +3157,134 @@ Podporuje všechny jednotkové systémy kromě „US obvyklé“ a „Budování Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Zobrazit název rozměrových vazeb s formátem - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Výchozí nastavení: %N = %V %V - hodnota rozměru - + Use system decimals setting for cursor coordinates Pro souřadnice kurzoru použijte nastavení systémových desetinných míst - + Hide all objects that depend on the sketch Skrýt všechny objekty, které závisí na náčrtu - + Show objects used for external geometry Zobrazit objekty použité pro vnější geometrii - + Show objects that the sketch is attached to Zobrazit objekty, ke kterým je náčrt připojený - + Restore camera position after editing Obnovit polohu kamery po úpravě - + Force orthographic camera when entering edit Vynutit ortografický pohled na začátku editace - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Poznámka: tato nastavení jsou výchozí pro nové náčrty. Chování je uloženo individuálně pro každý náčrt jako vlastnost v záložce Pohled. - + Unexpected C++ exception Neočekávaná C++ vyjímka - + Sketcher Náčrt @@ -3888,112 +3904,112 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - + The sketch is invalid and cannot be edited. Náčrt není platný a nemůže být upravován. - + The following constraint is partially redundant: Toto omezení je částečně nadbytečné: - + The following constraints are partially redundant: Tato omezení jsou částečně nadbytečná: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Prázdný náčrt - + Over-constrained: Převazbené: - + Malformed constraints: Poškozené vazby: - + Redundant constraints: Nadbytečné vazby: - + Partially redundant: Částečně nadbytečné: - + Solver failed to converge Řešič nezkonvergoval - + Under-constrained: Nedostatečně omezený: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4003,7 +4019,7 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. - + Fully constrained Plně zavazbené @@ -4484,7 +4500,7 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl ViewProviderSketch - + and %1 more a %1 další @@ -4728,12 +4744,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Chyba @@ -4867,11 +4883,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Spuštění nástroje přerušeno @@ -4948,17 +4964,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Přidání elipsy se nezdařilo - + Failed to rotate Nepodařilo se otočit - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Nepodařilo se změnit měřítko - + Failed to translate Nepodařilo se posunout @@ -5116,12 +5137,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Odstranit původní geometrii (U) - + Apply equal constraints Použít vazby rovnosti - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Pokud je vybrána tato možnost, rozměrové vazby jsou z operace vyloučeny. @@ -5486,7 +5507,7 @@ Místo toho jsou mezi původními objekty a jejich kopiemi aplikovány vazby sho TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Kopie (+'U'/ -'J') @@ -5507,7 +5528,7 @@ Místo toho jsou mezi původními objekty a jejich kopiemi aplikovány vazby sho TaskSketcherTool_c1_scale - + Keep original geometries (U) Zachovat původní geometrii (U) @@ -5528,7 +5549,7 @@ Místo toho jsou mezi původními objekty a jejich kopiemi aplikovány vazby sho TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Kopie (+'U'/-'J') @@ -5536,7 +5557,7 @@ Místo toho jsou mezi původními objekty a jejich kopiemi aplikovány vazby sho TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Řádky (+'R'/-'F') @@ -5679,12 +5700,12 @@ Místo toho jsou mezi původními objekty a jejich kopiemi aplikovány vazby sho TaskSketcherTool_c1_translate - + Apply equal constraints Použít vazby rovnosti - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Pokud je vybrána tato možnost, rozměrové vazby jsou z operace vyloučeny. @@ -7836,25 +7857,25 @@ Body musí být k lince mřížky blíže než pětina rozteče mřížky, aby s SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Parametry otáčení @@ -7862,17 +7883,17 @@ Body musí být k lince mřížky blíže než pětina rozteče mřížky, aby s SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parametry měřítka @@ -7921,24 +7942,24 @@ Body musí být k lince mřížky blíže než pětina rozteče mřížky, aby s SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parametry posunutí - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 590886d3a9..345c38b83c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -88,7 +88,7 @@ Converts the selected geometry to B-splines - Converts the selected geometry to B-splines + Wandelt die ausgewählte Geometrie in einen B-Spline um @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Sketcher-Randbedingung umbenannt - + Drag Point Punkt ziehen - + Drag Curve Kurve ziehen - + Drag geometries Geometrien ziehen - + Drag Constraint Randbedingung ziehen - + Modify sketch constraints Sketcher-Randbedingung geändert @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Bogennut hinzufügen - + Rotate geometries Geometrien gedreht - + Scale geometries Geometrien skaliert - + Translate geometries Geometrien verschoben @@ -936,14 +936,14 @@ invalid constraints, and degenerate geometry Add Auto-Constraints - Add Auto-Constraints + Automatische Randbedingungen hinzufügen Add Sketch B-Spline - Add Sketch B-Spline + Skizzen-B-Spline hinzufügen @@ -1699,7 +1699,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun %1 pick point - %1 pick point + %1 Punkt auswählen @@ -1722,7 +1722,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun %1 pick second point - %1 pick second point + %1 zweiten Punkt auswählen @@ -2942,12 +2942,12 @@ Erfordert das erneute aktivieren des Bearbeitungsmodus. Closed loops will automatically generate internal faces which are selectable to be used with other tools - Closed loops will automatically generate internal faces which are selectable to be used with other tools + Geschlossene Konturen generieren automatisch interne Flächen, die ausgewählt werden können, um sie mit anderen Werkzeugen zu verwenden Generate internal faces - Generate internal faces + Interne Flächen generieren @@ -3105,49 +3105,50 @@ Diese Einstellung ist nur für die Werkzeugleiste. Unabhängig von der Auswahl s Anzeige - + Font size Schriftgröße - + + px px - + View scale ratio Skalierungsverhältnis anzeigen - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Basislängeneinheiten werden in Beschränkungen oder Koordinaten des Eingabezeigers nicht angezeigt. Unterstützt alle Einheitssysteme außer 'US Customary' und 'US/Euro-Bauwesen'. - + Segments per geometry Segmente pro Geometrie - + Ask for value after creating a dimensional constraint Wert erfragen, nach Erstellung einer maßlichen Randbedingung - + Geometry creation "Continue Mode" Geometrie im "Fortsetzen-Modus" erstellen - + Constraint creation "Continue Mode" Randbedingungen im "Fortsetzen-Modus" erstellen - + Hide base length units for supported unit systems Basislängeneinheiten für unterstützte Einheitensysteme ausblenden @@ -3157,119 +3158,134 @@ Unterstützt alle Einheitssysteme außer 'US Customary' und 'US/Euro-Bauwesen'.< Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Namen der maßlichen Randbedingungen in Maßeinträgen anzeigen - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - Forces the camera to an orthographic view when editing a sketch. -Works only when "Restore camera position after editing" is enabled. + Zwingt die Kamera in eine orthogonale Ansicht, wenn eine Skizze bearbeitet wird. +Funktioniert nur, wenn "Kameraposition nach dem Bearbeiten wiederherstellen" aktiviert ist. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3282,47 +3298,47 @@ Standardmäßig: %N = %V %V - Wert der Maßzahl - + Use system decimals setting for cursor coordinates Benutze die dezimalen Einstellungen des Systems für Koordinaten des Eingabezeigers - + Hide all objects that depend on the sketch Alle Objekte verstecken, die von der Skizze abhängen - + Show objects used for external geometry Objekte für externe Geometrie anzeigen - + Show objects that the sketch is attached to Objekte anzeigen, an denen die Skizze befestigt ist - + Restore camera position after editing Kameraposition nach der Bearbeitung wiederherstellen - + Force orthographic camera when entering edit Orthogonale Kamera bei Aktivierung des Bearbeitungsmodus festlegen - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Hinweis: Dieses sind die Standardeinstellungen, die für neue Skizzen verwendet werden. Das Verhalten wird für jede Skizze separat als Eigenschaften auf der Registerkarte Ansicht gespeichert. - + Unexpected C++ exception Unerwartete C++ - Ausnahme - + Sketcher Sketcher @@ -3889,112 +3905,112 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Ein Dialog im Arbeitspanel ist bereits geöffnet - + The sketch is invalid and cannot be edited. Die Skizze ist ungültig und kann nicht bearbeitet werden. - + The following constraint is partially redundant: Die folgende Randbedingung ist teilweise überflüssig: - + The following constraints are partially redundant: Die folgenden Randbedingungen sind teilweise überflüssig: - + Edit Sketch Edit Sketch - + Close this dialog? Diesen Dialog schließen? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Leere Skizze - + Over-constrained: Überbestimmt: - + Malformed constraints: Fehlerhafte Randbedingungen: - + Redundant constraints: Überflüssige Randbedingungen: - + Partially redundant: Teilweise redundant: - + Solver failed to converge Der Gleichungslöser konnte keine Lösung annähern - + Under-constrained: Unterbestimmt: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4002,7 +4018,7 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. - + Fully constrained Vollständig bestimmt @@ -4483,7 +4499,7 @@ Eigen Sparse QR ein Algorithmus, der für dünn besetzte Matrizen optimiert ist; ViewProviderSketch - + and %1 more und %1 mehr @@ -4508,7 +4524,7 @@ Eigen Sparse QR ein Algorithmus, der für dünn besetzte Matrizen optimiert ist; Edit Mode - Edit Mode + Bearbeitungsmodus @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Fehlermeldungen @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Werkzeugausführung abgebrochen @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Konnte Ellipse nicht hinzufügen - + Failed to rotate Drehen fehlgeschlagen - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Skalieren fehlgeschlagen - + Failed to translate Translation fehlgeschlagen @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Originalgeometrien löschen (U) - + Apply equal constraints Gleichheit(en) übernehmen - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Wenn diese Option ausgewählt ist, werden maßliche Randbedingungen vom Vorgang ausgenommen. @@ -5424,7 +5445,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und Line Type - Line Type + Linienart @@ -5444,7 +5465,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und Line pattern of external reference edges - Line pattern of external reference edges + Linienart der externen Bezugskanten @@ -5485,7 +5506,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Anzahl der Kopien (+'U' /- 'J') @@ -5506,7 +5527,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und TaskSketcherTool_c1_scale - + Keep original geometries (U) Originalgeometrie behalten (U) @@ -5527,7 +5548,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Anzahl der Kopien (+'U' / -'J') @@ -5535,7 +5556,7 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Reihen (+'R' / -'F') @@ -5678,12 +5699,12 @@ Stattdessen werden Gleichheits-Randbedingungen zwischen den Originalobjekten und TaskSketcherTool_c1_translate - + Apply equal constraints Gleichheit(en) übernehmen - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Wenn diese Option ausgewählt ist, werden maßliche Randbedingungen vom Vorgang ausgenommen. @@ -7686,14 +7707,14 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset %1 pick first point - %1 pick first point + %1 ersten Punkt auswählen %1 pick second point - %1 pick second point + %1 zweiten Punkt auswählen @@ -7701,12 +7722,12 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset %1 pick first point - %1 pick first point + %1 ersten Punkt auswählen %1 pick next point - %1 pick next point + %1 nächsten Punkt auswählen @@ -7835,25 +7856,25 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Parameter der bogenförmigen Anordnung @@ -7861,17 +7882,17 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parameter der Skalierung @@ -7920,24 +7941,24 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parameter der linearen Anordnung - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts index 262062b906..609c2c3265 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Μετονομασία περιορισμού σχεδίου - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag geometries Drag geometries - + Drag Constraint Drag Constraint - + Modify sketch constraints Τροποποίηση περιορισμών σχεδίου @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Add sketch arc slot - + Rotate geometries Rotate geometries - + Scale geometries Scale geometries - + Translate geometries Translate geometries @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Απεικόνιση - + Font size Μέγεθος γραμματοσειράς - + + px px - + View scale ratio Προβολή αναλογίας κλίμακας - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - + Segments per geometry Τμήματα ανά γεωμετρικό στοιχείο - + Ask for value after creating a dimensional constraint Ερώτηση για την τιμή, μετά από τη δημιουργία ενός περιορισμού των διαστάσεων - + Geometry creation "Continue Mode" Δημιουργία γεωμετρίας "Συνέχεια λειτουργίας" - + Constraint creation "Continue Mode" Δημιουργία περιορισμών "Συνέχεια Λειτουργίας" - + Hide base length units for supported unit systems Απόκρυψη μονάδων μήκους βάσης για συστήματα υποστηριζόμενων μονάδων @@ -3156,119 +3157,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'.Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Εμφάνιση ονόματος περιορισμού διαστάσεων με μορφή - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Defaults to: %N = %V %V - dimension value - + Use system decimals setting for cursor coordinates Use system decimals setting for cursor coordinates - + Hide all objects that depend on the sketch Απόκρυψη όλων των αντικειμένων που εξαρτώνται από το σχέδιο - + Show objects used for external geometry Εμφάνιση των αντικειμένων που χρησιμοποιούνται ως εξωτερική γεωμετρία - + Show objects that the sketch is attached to Εμφάνιση αντικειμένων στα οποία είναι συνδεδεμένο το σχέδιο - + Restore camera position after editing Επαναφορά της θέσης της κάμερας μετά την επεξεργασία - + Force orthographic camera when entering edit Επιβολή ορθογραφικής κάμερας κατά την εισαγωγή επεξεργασίας - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Σημείωση: αυτές οι ρυθμίσεις είναι προεπιλεγμένες που εφαρμόζονται σε νέα σχέδια. Η ενέργεια απομνημονεύεται για κάθε σκίτσο ξεχωριστά ως ιδιότητες στην καρτέλα Προβολή. - + Unexpected C++ exception Απρόσμενη εξαίρεση C++ - + Sketcher Σχεδιασμός @@ -3888,112 +3904,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. Το σχέδιο είναι μη έγκυρο και δε δύναται να υποστεί επεξεργασία. - + The following constraint is partially redundant: Ο ακόλουθος περιορισμός είναι εν μέρει περιττός: - + The following constraints are partially redundant: Οι ακόλουθοι περιορισμοί είναι εν μέρει περιττοί: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Κενό σχέδιο - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Περιττοί περιορισμοί: - + Partially redundant: Εν μέρει περιττό: - + Solver failed to converge Solver failed to converge - + Under-constrained: Under-constrained: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -4483,7 +4499,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more και %1 ακόμη @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Σφάλμα @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Failed to add ellipse - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Failed to translate @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Διαγραφή αρχικών γεωμετριών (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5485,7 +5506,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Αντίγραφα (+'U'/ -'J') @@ -5506,7 +5527,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Διατηρήστε τις αρχικές γεωμετρίες (U) @@ -5527,7 +5548,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Αντίγραφα (+'U'/ -'J') @@ -5535,7 +5556,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Σειρές (+'R'/-'F') @@ -5678,12 +5699,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7835,25 +7856,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotate parameters @@ -7861,17 +7882,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Scale parameters @@ -7920,24 +7941,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Translate parameters - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index 7a5b5a0d21..dcebf0af05 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Renombrar restricción de croquis - + Drag Point Punto de arrastre - + Drag Curve Arrastrar curva - + Drag geometries Arrastrar geometrías - + Drag Constraint Restricción de arrastre - + Modify sketch constraints Modificar restricciones de croquis @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Agregar croquis de ranura de arco - + Rotate geometries Girar geometrías - + Scale geometries Aplicar escala a geometrías - + Translate geometries Traducir geometrías @@ -3103,49 +3103,50 @@ Estos ajustes solo son para la barra de herramientas. Cualquiera que sea el que Visualización - + Font size Tamaño de la fuente - + + px px - + View scale ratio Ver razón de escala - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Las unidades de longitud base no se mostrarán en las restricciones ni en las coordenadas del cursor. Admite todos los sistemas de unidades excepto 'US custom' y 'Building US/Euro'. - + Segments per geometry Segmentos por geometría - + Ask for value after creating a dimensional constraint Solicitar valor tras crear restricción dimensional - + Geometry creation "Continue Mode" Creación de geometría "Modo Continuo" - + Constraint creation "Continue Mode" Creación de restricciones "Modo Continuo" - + Hide base length units for supported unit systems Ocultar unidades de longitud de base para los sistemas de unidades soportadas @@ -3155,119 +3156,134 @@ Admite todos los sistemas de unidades excepto 'US custom' y 'Building US/Euro'.< Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Mostrar nombre de restricción de cota con formato - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3280,47 +3296,47 @@ Por defecto en: %N = %V %V - valor de la cota - + Use system decimals setting for cursor coordinates Utilizar la configuración de decimales del sistema para las coordenadas del cursor - + Hide all objects that depend on the sketch Ocultar todos los objetos que dependen del croquis - + Show objects used for external geometry Mostrar objetos utilizados para la geometría externa - + Show objects that the sketch is attached to Mostrar los objetos a los que está conectado el croquis - + Restore camera position after editing Restablecer la posición de la cámara después de editar - + Force orthographic camera when entering edit Forzar cámara ortogonal al entrar en modo edición - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Nota: estos valores son aplicados por defecto a nuevos croquis. El comportamiento se recuerda para cada croquis individualmente como propiedades en el menú Ver. - + Unexpected C++ exception Excepción de C++ inesperada - + Sketcher Sketcher @@ -3887,112 +3903,112 @@ Esto se hace al analizar las geometrías y restricciones del croquis. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + The following constraint is partially redundant: La siguiente restricción es parcialmente redundante: - + The following constraints are partially redundant: Las siguientes restricciones son parcialmente redundantes: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Croquis vacío - + Over-constrained: Sobre-restringido: - + Malformed constraints: Restricciones malformadas: - + Redundant constraints: Restricciones redundantes: - + Partially redundant: Parcialmente redundante: - + Solver failed to converge El solver falló al converger - + Under-constrained: Sub-restringido: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4000,7 +4016,7 @@ Esto se hace al analizar las geometrías y restricciones del croquis. - + Fully constrained Totalmente restringido @@ -4481,7 +4497,7 @@ El algoritmo QR de Eigen Sparse está optimizado para matrices dispersas; genera ViewProviderSketch - + and %1 more y %1 más @@ -4725,12 +4741,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Error @@ -4864,11 +4880,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Se interrumpió la ejecución de la herramienta @@ -4945,17 +4961,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Fallo al añadir elipse - + Failed to rotate No se pudo girar - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Fallo al dar escala - + Failed to translate Error al traducir @@ -5113,12 +5134,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Eliminar geometrías originales (U) - + Apply equal constraints Aplicar restricciones de igualdad - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si esta opción es seleccionada las restricciones dimensionales se excluyen de la operación. @@ -5483,7 +5504,7 @@ En su lugar, se aplican restricciones de igualdad entre los objetos originales y TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copias (+'U'/-'J') @@ -5504,7 +5525,7 @@ En su lugar, se aplican restricciones de igualdad entre los objetos originales y TaskSketcherTool_c1_scale - + Keep original geometries (U) Mantener geometrías originales (U) @@ -5525,7 +5546,7 @@ En su lugar, se aplican restricciones de igualdad entre los objetos originales y TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copias (+'U'/-'J') @@ -5533,7 +5554,7 @@ En su lugar, se aplican restricciones de igualdad entre los objetos originales y TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Filas (+'R'/-'F') @@ -5676,12 +5697,12 @@ En su lugar, se aplican restricciones de igualdad entre los objetos originales y TaskSketcherTool_c1_translate - + Apply equal constraints Aplicar restricciones de igualdad - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si esta opción es seleccionada las restricciones dimensionales se excluyen de la operación. @@ -7833,25 +7854,25 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Girar parámetros @@ -7859,17 +7880,17 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parámetros de escala @@ -7918,24 +7939,24 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parámetros de traducción - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index f8f353ebaa..9c1f160276 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Aldatu krokis-murrizketaren izena - + Drag Point Arrastatu puntua - + Drag Curve Arrastatu kurba - + Drag geometries Drag geometries - + Drag Constraint Arrastatu murrizketa - + Modify sketch constraints Aldatu krokis-murrizketak @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Add sketch arc slot - + Rotate geometries Biratu geometriak - + Scale geometries Scale geometries - + Translate geometries Translate geometries @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Bistaratzea - + Font size Letra-tamaina - + + px px - + View scale ratio Ikusi eskala-erlazioa - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Oinarri-luzeraren unitateak ez dira bistaratuko murrizketetan edo kurtsore-koordenatuetan. Unitate-sistema guztiak onartzen ditu, 'US customary' eta 'Building US/Euro' salbu. - + Segments per geometry Segmentuak geometria bakoitzeko - + Ask for value after creating a dimensional constraint Eskatu balioa kota-murrizketa bat sortu ondoren - + Geometry creation "Continue Mode" "Modu jarraituko" geometria-sorrera - + Constraint creation "Continue Mode" "Modu jarraituko" murrizketa-sorrera - + Hide base length units for supported unit systems Ezkutatu oinarri-luzeraren unitateak onartutako unitate-sistemetan @@ -3156,119 +3157,134 @@ Unitate-sistema guztiak onartzen ditu, 'US customary' eta 'Building US/Euro' sal Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Erakutsi kota-murrizketaren izena formatuarekin - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Lehenetsia: %N = %V %V - kota-balioa - + Use system decimals setting for cursor coordinates Erabili sistemaren dezimalen ezarpena kurtsore-koordenatuetan - + Hide all objects that depend on the sketch Ezkutatu krokisaren mendekoak diren objektu guztiak - + Show objects used for external geometry Erakutsi kanpo-geometriarako erabili diren objektuak - + Show objects that the sketch is attached to Erakutsi krokisa erantsita duten objektuak - + Restore camera position after editing Berrezarri kameraren posizioa edizioaren ondoren - + Force orthographic camera when entering edit Behartu kamera ortografikoa edizioa hastean - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Oharra: ezarpen hauek krokis berriei aplikatutako balio lehenetsiak dira. Portaera 'Ikusi' fitxan gogoratuko dira, propietate gisa eta krokis bakoitzerako bereak. - + Unexpected C++ exception Espero ez zen C++ salbuespena - + Sketcher Krokisgilea @@ -3888,112 +3904,112 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - + The sketch is invalid and cannot be edited. Krokisa baliogabea da eta ezin da editatu. - + The following constraint is partially redundant: Honako murrizketa partzialki erredundantea da: - + The following constraints are partially redundant: Honako murrizketak partzialki erredundanteak dira: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Krokis hutsa - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Murrizketa erredundanteak: - + Partially redundant: Partzialki erredundantea: - + Solver failed to converge Ebazleak ezin izan du konbergitu - + Under-constrained: Under-constrained: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. - + Fully constrained Osorik murritua @@ -4483,7 +4499,7 @@ Eigen Sparse QR algoritmoa matrize sakabanatuetarako optimizatuta dago; normalea ViewProviderSketch - + and %1 more eta %1 gehiago @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Errorea @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Failed to add ellipse - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Failed to translate @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Delete original geometries (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5484,7 +5505,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5505,7 +5526,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Keep original geometries (U) @@ -5526,7 +5547,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copies (+'U'/-'J') @@ -5534,7 +5555,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rows (+'R'/-'F') @@ -5677,12 +5698,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7834,25 +7855,25 @@ Puntuak sareta-tartearen bosten bat baino hurbilago ezarri behar dira lerro bate SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotate parameters @@ -7860,17 +7881,17 @@ Puntuak sareta-tartearen bosten bat baino hurbilago ezarri behar dira lerro bate SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Scale parameters @@ -7919,24 +7940,24 @@ Puntuak sareta-tartearen bosten bat baino hurbilago ezarri behar dira lerro bate SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Translate parameters - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 85b4303ad4..ec909c5fb5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Nimeä rajoite uudelleen - + Drag Point Raahaa pistettä - + Drag Curve Raahaa käyrää - + Drag geometries Vedä geometrioita - + Drag Constraint Raahaa rajoitetta - + Modify sketch constraints Muokkaa luonnoksen rajoitteita @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Luo kaarislotti - + Rotate geometries Kierrä geometrioita - + Scale geometries Skaalaa geometrioita - + Translate geometries Muunna geometrioita @@ -3110,49 +3110,50 @@ Tämä asetus vaikuttaa vain työkaluriviin. Valitsit kummin tahansa, kaikki ty Näyttö - + Font size Fonttikoko - + + px px - + View scale ratio Näkymän skaalaussuhde - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Perusmittayksiköitä ei näytetä rajoitteissa tai osoittimenkoordinaateissa. Koskee kaikkia yksikköjärjestelmiä paitsi 'USA:n yksikköjärjestelmä' ja 'Rakentaminen USA'. - + Segments per geometry Segmentit geometriaa kohden - + Ask for value after creating a dimensional constraint Pyydä arvo mittarajoitteen luomisen jälkeen - + Geometry creation "Continue Mode" Geometrian luonnin jatkuva tila - + Constraint creation "Continue Mode" Rajoitteitten luonnin jatkuva tila - + Hide base length units for supported unit systems Piilota tuettujen yksikköjärjestelmien peruspituusyksikkö @@ -3162,119 +3163,134 @@ Koskee kaikkia yksikköjärjestelmiä paitsi 'USA:n yksikköjärjestelmä' ja 'R Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Näytä mittarajoitteitten nimi muodossa - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3287,47 +3303,47 @@ Oletus: %N = %V %V - mitta-arvo - + Use system decimals setting for cursor coordinates Käytä järjestelmän desimaaliasetuksia kohdistimen koordinaateille - + Hide all objects that depend on the sketch Piilota kaikki objektit, jotka ovat riippuvaisia luonnoksesta - + Show objects used for external geometry Näytä ulkoiseen geometriaan käytetyt objektit - + Show objects that the sketch is attached to Näytä objektit, joihin sketsi on liitetty - + Restore camera position after editing Palauta kameran sijainti muokkaamisen jälkeen - + Force orthographic camera when entering edit Pakota ortograafinen kamera kun tullaan muokkaustilaan - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Huom: nämä asetukset ovat uusien sketsien oletus. Sketsien asetukset tallentuvat ja niitä voi muuttaa Näytä -valikossa. - + Unexpected C++ exception Odottamaton C++-poikkeus - + Sketcher Sketcher @@ -3894,112 +3910,112 @@ Etsintä tapahtuu tutkimalla sketsin geometriaa ja rajoitteita. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - + The sketch is invalid and cannot be edited. Sketsi on virheellinen eikä sitä voi muokata. - + The following constraint is partially redundant: Seuraava rajoite on osittain tarpeeton: - + The following constraints are partially redundant: Seuraavat rajoitteet ovat osittain tarpeettomia: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Tyhjä sketsi - + Over-constrained: Ylirajoitettu: - + Malformed constraints: Väärinmuodostetut rajoitteet: - + Redundant constraints: Tarpeettomat rajoitteet: - + Partially redundant: Osittain tarpeettomat: - + Solver failed to converge Ratkaisin epäonnistui yhdistämisessä - + Under-constrained: Alirajoitettu: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4007,7 +4023,7 @@ Etsintä tapahtuu tutkimalla sketsin geometriaa ja rajoitteita. - + Fully constrained Täysin rajoitettu @@ -4489,7 +4505,7 @@ Eigen-Sparse-QR -algoritmi on optimoitu matriiseille jotka ovat harvoja; yleens ViewProviderSketch - + and %1 more ja %1 lisää @@ -4733,12 +4749,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Virhe @@ -4872,11 +4888,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Työkalun suoritus keskeytetty @@ -4953,17 +4969,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Ellipsiä ei voitu luoda - + Failed to rotate Kiertäminen ei onnistu - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Skaalaaminen ei onnistu - + Failed to translate Muuntaminen ei onnistu @@ -5121,12 +5142,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Poista alkuperäiset geometriat (U) - + Apply equal constraints Aseta yhtenevyysrajoite - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Jos tämä valinta on valittu, mittojen rajoitteita ei sovelleta. @@ -5491,7 +5512,7 @@ Sen sijaan kopiot ja alkuperäiset rajoitetaan yhteneviksi. TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Kopiot (+'U'/ -'J') @@ -5512,7 +5533,7 @@ Sen sijaan kopiot ja alkuperäiset rajoitetaan yhteneviksi. TaskSketcherTool_c1_scale - + Keep original geometries (U) Säilytä alkuperäiset geometriat (U) @@ -5533,7 +5554,7 @@ Sen sijaan kopiot ja alkuperäiset rajoitetaan yhteneviksi. TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Kopiot (+'U'/-'J') @@ -5541,7 +5562,7 @@ Sen sijaan kopiot ja alkuperäiset rajoitetaan yhteneviksi. TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rivit (+'R'/-'F') @@ -5684,12 +5705,12 @@ Sen sijaan kopiot ja alkuperäiset rajoitetaan yhteneviksi. TaskSketcherTool_c1_translate - + Apply equal constraints Aseta yhtenevyysrajoite - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Jos tämä valinta on valittu, mittojen rajoitteita ei sovelleta. @@ -7841,25 +7862,25 @@ Pisteen täyty olla lähempänä kuin ruudukkovälin viidesosa, jotta tarttumine SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Kierron parametrit @@ -7867,17 +7888,17 @@ Pisteen täyty olla lähempänä kuin ruudukkovälin viidesosa, jotta tarttumine SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Skaalauksen parametrit @@ -7926,24 +7947,24 @@ Pisteen täyty olla lähempänä kuin ruudukkovälin viidesosa, jotta tarttumine SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Muunnoksen parametrit - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 8e1c445941..a644bdc2bd 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Renommer la contrainte d'esquisse - + Drag Point Faire glisser le point - + Drag Curve Faire glisser la courbe - + Drag geometries Faire glisser les géométries - + Drag Constraint Faire glisser la contrainte - + Modify sketch constraints Modifier les contraintes d'esquisse @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Ajouter une rainure en arc dans l'esquisse - + Rotate geometries Faire pivoter les géométries - + Scale geometries Mettre à l'échelle les géométries - + Translate geometries Translater des géométries @@ -2285,7 +2285,7 @@ Combinaisons acceptées : deux courbes ; une extrémité et une courbe ; deux ex Change Value - Change Value + Changer la valeur @@ -3105,49 +3105,50 @@ Ce paramètre ne concerne que la barre d'outils. Quel que soit votre choix, tous Affichage - + Font size Taille de la police - + + px px - + View scale ratio Échelle de la vue - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Les unités de longueur de base ne seront pas affichées dans les contraintes ou les coordonnées du curseur. Cela prend en charge tous les systèmes d'unités sauf les "unités états-uniennes" et celles des "constructions états-uniennes/européennes". - + Segments per geometry Segments par géométrie - + Ask for value after creating a dimensional constraint Demander la valeur après la création d'une contrainte de dimension - + Geometry creation "Continue Mode" Créer des géométries en mode continu - + Constraint creation "Continue Mode" Créer des contraintes en mode continu - + Hide base length units for supported unit systems Masquer les unités de longueur de base pour les systèmes d’unités pris en charge @@ -3157,119 +3158,134 @@ Cela prend en charge tous les systèmes d'unités sauf les "unités états-unien Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Afficher le nom des contraintes de dimension avec le format - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3282,47 +3298,47 @@ Par défaut : %N = %V %V - valeur de la dimension - + Use system decimals setting for cursor coordinates Utiliser les décimales du système pour les coordonnées du curseur - + Hide all objects that depend on the sketch Masquer tous les objets qui dépendent de l’esquisse - + Show objects used for external geometry Afficher les objets utilisés pour la géométrie externe - + Show objects that the sketch is attached to Afficher les objets auxquels l'esquisse est ancrée - + Restore camera position after editing Restaurer la position de la caméra après l’édition - + Force orthographic camera when entering edit Forcer la caméra orthographique lors du passage en mode édition - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Remarque : ces paramètres sont des valeurs par défaut appliquées aux nouvelles esquisses. Le comportement est mémorisé pour chaque esquisse en tant que propriétés dans l'onglet Vue. - + Unexpected C++ exception Exception C++ inattendue - + Sketcher Sketcher @@ -3889,112 +3905,112 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Une fenêtre de dialogue est déjà ouverte dans le panneau des tâches - + The sketch is invalid and cannot be edited. L'esquisse n'est pas valide et ne peut pas être éditée. - + The following constraint is partially redundant: La contrainte suivante est partiellement redondante : - + The following constraints are partially redundant: Les contraintes suivantes sont partiellement redondantes : - + Edit Sketch Edit Sketch - + Close this dialog? Voulez-vous fermer cette boîte de dialogue ? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Esquisse vide - + Over-constrained: Esquisse sur-contrainte : - + Malformed constraints: Esquisse avec contraintes défectueuses : - + Redundant constraints: Esquisse avec contraintes redondantes : - + Partially redundant: Esquisse avec contraintes partiellement redondantes : - + Solver failed to converge Le solveur n'a pas pu converger - + Under-constrained: L'esquisse manque de contraintes : - + %n Degrees of Freedom %n Degrees of Freedom @@ -4002,7 +4018,7 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. - + Fully constrained Esquisse entièrement contrainte @@ -4482,7 +4498,7 @@ L'algorithme Eigen Sparse QR est optimisé pour les matrices peu denses, génér ViewProviderSketch - + and %1 more et %1 de plus @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Erreur @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted L'exécution de l'outil a été interrompue. @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Impossible d'ajouter une ellipse - + Failed to rotate Impossible de faire pivoter - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Impossible de mettre à l'échelle - + Failed to translate Impossible de créer une matrice d'objets @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Supprimer les géométries d'origine (U) - + Apply equal constraints Appliquer des contraintes d'égalité - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si cette option est sélectionnée, les contraintes dimensionnelles sont exclues de l'opération. @@ -5484,7 +5505,7 @@ Au lieu de cela, des contraintes d'égalité sont appliquées entre les objets o TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Nombre de copies (+ U / - J) @@ -5505,7 +5526,7 @@ Au lieu de cela, des contraintes d'égalité sont appliquées entre les objets o TaskSketcherTool_c1_scale - + Keep original geometries (U) Garder les géométries d'origine (U) @@ -5526,7 +5547,7 @@ Au lieu de cela, des contraintes d'égalité sont appliquées entre les objets o TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Nombre de copies (+ U / - J) @@ -5534,7 +5555,7 @@ Au lieu de cela, des contraintes d'égalité sont appliquées entre les objets o TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Nombre de rangées (+ R / - F) @@ -5677,12 +5698,12 @@ Au lieu de cela, des contraintes d'égalité sont appliquées entre les objets o TaskSketcherTool_c1_translate - + Apply equal constraints Appliquer des contraintes d'égalité - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Si cette option est sélectionnée, les contraintes dimensionnelles sont exclues de l'opération. @@ -7834,25 +7855,25 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Paramètres de rotation @@ -7860,17 +7881,17 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Paramètres de l'échelle @@ -7919,24 +7940,24 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Paramètres de la matrice - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 6320aca604..70699e169c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -888,29 +888,29 @@ invalid constraints, and degenerate geometry Preimenujte ograničenja skica - + Drag Point Povucite točku - + Drag Curve Povucite krivulju - + Drag geometries Drag geometries - + Drag Constraint Povucite ograničenje - + Modify sketch constraints Izmijenite ograničenja skica @@ -935,17 +935,17 @@ invalid constraints, and degenerate geometry Dodaj lučni utor skice - + Rotate geometries Rotiraj geometrije - + Scale geometries Skaliranje geometrije - + Translate geometries Premještanje geometrije @@ -3160,49 +3160,50 @@ Ova postavka vrijedi samo za alatnu traku. Bez obzira što ste odabrali, svi ala Prikaz - + Font size Veličina Pisma - + + px px - + View scale ratio Omjer skaliranja pogleda - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Jedinice osnovne duljine neće se prikazivati ​​u ograničenjima ili koordinatama pokazivača. Podržava sve jedinice jedinice, osim 'US customary' i "Izgradnja US / Euro". - + Segments per geometry Segmenata po geometriji - + Ask for value after creating a dimensional constraint Pitati za vrijednost nakon stvaranja dimenzionalna ograničenja - + Geometry creation "Continue Mode" Stvaranje Geometrija "Kontinuirani Mod" - + Constraint creation "Continue Mode" Stvaranje Ograničenja "Kontinuirani Mod" - + Hide base length units for supported unit systems Sakrij jedinice dužine za potporu sustava jedinica @@ -3212,119 +3213,134 @@ Podržava sve jedinice jedinice, osim 'US customary' i "Izgradnja US / Euro".Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Prikaz naziva ograničenja dimenzija s formatom - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3337,47 +3353,47 @@ Zadano na: %N = %V %V - vrijednost dimenzije - + Use system decimals setting for cursor coordinates Koristite postavku decimala sustava za koordinate kursora - + Hide all objects that depend on the sketch Sakri sve objekte koji ovise o skici - + Show objects used for external geometry Prikaži objekte korištene za vanjske geometrije - + Show objects that the sketch is attached to Prikaži objekt(e) kojima je skica pridružena - + Restore camera position after editing Vratiti položaj kamere nakon uređivanja - + Force orthographic camera when entering edit Prisilna ortografska kamera pri ulasku u uređivanje - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Napomena: ove postavke su zadane postavke primijenjene na nove skice. Karakteristika se pamti za svaku skicu pojedinačno kao svojstva kartice Pogleda. - + Unexpected C++ exception Neočekivani C++ izuzetak - + Sketcher Skica @@ -3954,112 +3970,112 @@ To se radi analizom geometrije i ograničenja skice. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - + The sketch is invalid and cannot be edited. Skica je neispravna i ne može se uređivati. - + The following constraint is partially redundant: Sljedeće ograničenje je djelomično suvišno: - + The following constraints are partially redundant: Sljedeća ograničenja su djelomično suvišna: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Prazan skica - + Over-constrained: Pretjerano ograničeno: - + Malformed constraints: Deformirana ograničenja: - + Redundant constraints: Suvišna ograničenja: - + Partially redundant: Djelomično suvišno: - + Solver failed to converge Solver nije uspio konvergirati - + Under-constrained: Premalo ograničen: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4068,7 +4084,7 @@ To se radi analizom geometrije i ograničenja skice. - + Fully constrained Potpuno ograničen @@ -4560,7 +4576,7 @@ Eigen Sparse QR algoritam optimiziran je za rijetke matrice; obično brže ViewProviderSketch - + and %1 more i %1 još @@ -4807,12 +4823,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Pogreška @@ -4947,11 +4963,11 @@ Greška kod brisanja zadnjeg pola/čvora - - + + - + Tool execution aborted Prekinuto izvršavanje alata @@ -5028,17 +5044,22 @@ Greška kod brisanja zadnjeg pola/čvora Nije uspjelo dodavanje elipse - + Failed to rotate Neuspjelo okretanje - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Neuspjelo skaliranje - + Failed to translate Neuspjelo premještanje @@ -5196,12 +5217,12 @@ Greška kod brisanja zadnjeg pola/čvora Izbriši originalne geometrije (U) - + Apply equal constraints Primijenite jednaka ograničenja - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ako je ova opcija odabrana, dimenzijska ograničenja su isključena iz operacije. @@ -5568,7 +5589,7 @@ Umjesto toga, primjenjuju se jednaka ograničenja između izvornih objekata i nj TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Broj kopija (+'U'/ -'J') @@ -5589,7 +5610,7 @@ Umjesto toga, primjenjuju se jednaka ograničenja između izvornih objekata i nj TaskSketcherTool_c1_scale - + Keep original geometries (U) Zadrži originalne geometrije (U) @@ -5610,7 +5631,7 @@ Umjesto toga, primjenjuju se jednaka ograničenja između izvornih objekata i nj TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Broj kopija (+'U'/-'J') @@ -5618,7 +5639,7 @@ Umjesto toga, primjenjuju se jednaka ograničenja između izvornih objekata i nj TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Redci (+'R'/-'F') @@ -5761,12 +5782,12 @@ Umjesto toga, primjenjuju se jednaka ograničenja između izvornih objekata i nj TaskSketcherTool_c1_translate - + Apply equal constraints Primijenite jednaka ograničenja - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ako je ova opcija odabrana, dimenzijska ograničenja su isključena iz operacije. @@ -7922,25 +7943,25 @@ Točke moraju biti postavljene bliže od petine razdaljine rešetke kako bi se p SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotiraj parametre @@ -7948,17 +7969,17 @@ Točke moraju biti postavljene bliže od petine razdaljine rešetke kako bi se p SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parametri skaliranja @@ -8007,24 +8028,24 @@ Točke moraju biti postavljene bliže od petine razdaljine rešetke kako bi se p SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parametri premještanja - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index 80f8046999..34d984288f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Vázlat kényszer átnevezése - + Drag Point Pont húzása - + Drag Curve Ív húzása - + Drag geometries Geometriák húzása - + Drag Constraint Kényszer húzása - + Modify sketch constraints Vázlat kényszer módosítása @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Vázlat íves rés hozzáadása - + Rotate geometries Geometriák elforgatása - + Scale geometries Geometriák méretezése - + Translate geometries Geometriák fordítása @@ -3104,49 +3104,50 @@ Ez a beállítás csak az eszköztárra vonatkozik. A kiválasztástól függetl Megjelenítés - + Font size Betűméret - + + px px - + View scale ratio Méretezési arány megtekintése - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Az alaphosszegységek nem jelennek meg kényszerítésekben vagy kurzorkoordinátákban. Támogatja az összes egységrendszert, kivéve az 'USA szokásos' és az 'USA/euró építése' elemeket. - + Segments per geometry Geometriánkénti szakaszok - + Ask for value after creating a dimensional constraint Távolság kényszer létrehozása után kérjen értéket - + Geometry creation "Continue Mode" Geometria létrehozása "Folytatás mód" - + Constraint creation "Continue Mode" Megkötés létrehozása "Folytatódó mód" - + Hide base length units for supported unit systems A támogatott mértékegység rendszerek alap mértékegységeinek elrejtése @@ -3156,119 +3157,134 @@ Támogatja az összes egységrendszert, kivéve az 'USA szokásos' és az 'USA/e Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Méretezett kényszer nevének megjelenítése formátummal - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Alapértelmezett érték: %N = %V %V - méretérték - + Use system decimals setting for cursor coordinates A kurzor koordinátáinak rendszertizedesjegy-beállításának használata - + Hide all objects that depend on the sketch Minden objektum elrejtése, amely függ a vázlattól - + Show objects used for external geometry Mutassa az külső geometriához használt objektumokat - + Show objects that the sketch is attached to Olyan objektumok megjelenítése, amelyekhez a vázlat csatolva van - + Restore camera position after editing Kamera helyzetének visszaállítása a szerkesztés után - + Force orthographic camera when entering edit Függőleges vetületI kamera kényszer szerkesztési mód bekapcsolásakor - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Megjegyzés: Ezek az új vázlatok alapértelmezett beállításai. A rendszer minden vázlathoz külön-külön tárolja a viselkedést tulajdonságokként a Nézet lapon. - + Unexpected C++ exception Váratlan C++ kivétel - + Sketcher Vázlatkészítő @@ -3888,112 +3904,112 @@ Ez a vázlat geometriáinak és kényszerek elemzésével történik. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - + The sketch is invalid and cannot be edited. A vázlat érvénytelen, és nem szerkeszthető. - + The following constraint is partially redundant: A következő kényszer részben felesleges: - + The following constraints are partially redundant: A következő kényszerek részben feleslegesek: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Üres vázlat - + Over-constrained: Eltúlzott kényszer: - + Malformed constraints: Hibásan formázott kényszer: - + Redundant constraints: Felesleges kényszer: - + Partially redundant: Részben felesleges: - + Solver failed to converge A megoldó nem tudott hasonlítani - + Under-constrained: Nem eléggé kényszerített: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Ez a vázlat geometriáinak és kényszerek elemzésével történik. - + Fully constrained Teljesen kényszertett @@ -4482,7 +4498,7 @@ Az Eigen Sparse QR algoritmus ritka mátrixokra van optimalizálva; általában ViewProviderSketch - + and %1 more és további %1 @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Hiba @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Az eszköz végrehajtása megszakadt @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Sikertelen az ellipszis hozzáadása - + Failed to rotate Nem sikerült forgatni - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Nem sikerült méretezni - + Failed to translate Sikertelen fordítás @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Eredeti geometriák törlése (U) - + Apply equal constraints Egyenlő kényszerek alkalmazása - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ha ez a lehetőség bejelölt, a méretkényszerek kizárásra kerülnek a műveletből. @@ -5484,7 +5505,7 @@ Ehelyett az eredeti objektumok és másolataik között egyenlő kényszereket a TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Másolatok (+'U'/-'J') @@ -5505,7 +5526,7 @@ Ehelyett az eredeti objektumok és másolataik között egyenlő kényszereket a TaskSketcherTool_c1_scale - + Keep original geometries (U) Eredeti geometriák megtartása (U) @@ -5526,7 +5547,7 @@ Ehelyett az eredeti objektumok és másolataik között egyenlő kényszereket a TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Másolatok (+'U'/-'J') @@ -5534,7 +5555,7 @@ Ehelyett az eredeti objektumok és másolataik között egyenlő kényszereket a TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Sorok (+'R'/-'F') @@ -5677,12 +5698,12 @@ Ehelyett az eredeti objektumok és másolataik között egyenlő kényszereket a TaskSketcherTool_c1_translate - + Apply equal constraints Egyenlőség kényszerek alkalmazása - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ha ez a lehetőség bejelölt, a méretkényszerek kizárásra kerülnek a műveletből. @@ -7834,25 +7855,25 @@ A pontokat a rácsháló távolságának egyötödénél közelebb kell állíta SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Paraméterek elforgatása @@ -7860,17 +7881,17 @@ A pontokat a rácsháló távolságának egyötödénél közelebb kell állíta SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Méretezési paraméterek @@ -7919,24 +7940,24 @@ A pontokat a rácsháló távolságának egyötödénél közelebb kell állíta SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Paraméterek fordítása - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index ea9d4a19ba..f4a3128dd8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Rinomina il vincolo dello schizzo - + Drag Point Trascina Punto - + Drag Curve Trascina Curva - + Drag geometries Trascina geometrie - + Drag Constraint Trascina Vincolo - + Modify sketch constraints Modifica i vincoli dello schizzo @@ -898,19 +898,19 @@ invalid constraints, and degenerate geometry Aggiungi schizzo asola ad arco - + Rotate geometries Ruota geometrie - + Scale geometries Scalatura geometrie - + Translate geometries - Traduci geometrie + Trasla le geometrie @@ -2705,7 +2705,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Select Mirror Axis or Point - Select Mirror Axis or Point + Selezionare il punto o l'asse di specchiatura @@ -3104,49 +3104,50 @@ Questa impostazione è solo per la barra degli strumenti. Qualunque sia la scelt Visualizzazione - + Font size Dimensione del carattere - + + px px - + View scale ratio Visualizza rapporto scala - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Le unità di lunghezza di base non saranno visualizzate in vincoli o coordinate del cursore. Supporta tutti i sistemi di unità tranne 'US customary' e 'Building US/Euro'. - + Segments per geometry Segmenti per ogni geometria - + Ask for value after creating a dimensional constraint Richiedi il valore dopo la creazione di un vincolo dimensionale - + Geometry creation "Continue Mode" Crea la geometria usando la "Modalità continua" - + Constraint creation "Continue Mode" Creazione dei vincoli con "Modalità continua" - + Hide base length units for supported unit systems Nascondi le unità di lunghezza di base per i sistemi di unità supportati @@ -3156,119 +3157,134 @@ Supporta tutti i sistemi di unità tranne 'US customary' e 'Building US/Euro'.Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Mostra il nome del vincolo dimensionale con formato - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Applica agli Schizzi Esistenti - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Predefinito a: %N = %V %V - valore di dimensione - + Use system decimals setting for cursor coordinates Usa le impostazioni decimali di sistema per le coordinate del cursore - + Hide all objects that depend on the sketch Nascondi tutti gli oggetti che dipendono dallo schizzo - + Show objects used for external geometry Visualizza gli oggetti utilizzati per la geometria esterna - + Show objects that the sketch is attached to Visualizza oggetti a cui è associato lo schizzo - + Restore camera position after editing Ripristina la posizione della fotocamera dopo la modifica - + Force orthographic camera when entering edit Forza la fotocamera ortografica quando si inserisce la modifica - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Nota: queste impostazioni predefinite sono applicate a nuovi schizzi. Il comportamento viene ricordato individualmente per ogni schizzo come proprietà nella scheda Visualizza. - + Unexpected C++ exception Eccezione imprevista di C++ - + Sketcher Sketcher @@ -3888,112 +3904,112 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - + The sketch is invalid and cannot be edited. Lo schizzo non è valido e non può essere modificato. - + The following constraint is partially redundant: Il seguente vincolo è parzialmente ridondante: - + The following constraints are partially redundant: I seguenti vincoli sono parzialmente ridondanti: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Schizzo vuoto - + Over-constrained: Sovravincolato: - + Malformed constraints: Vincoli malformati: - + Redundant constraints: Vincoli ridondanti: - + Partially redundant: Parzialmente ridondante: - + Solver failed to converge Risolutore impossibilitato a convergere - + Under-constrained: Sottovincolato: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. - + Fully constrained Completamente vincolato @@ -4481,7 +4497,7 @@ L'algoritmo di Eigen Sparse QR è ottimizzato per matrici sparsi; solitamente pi ViewProviderSketch - + and %1 more e %1 in più @@ -4725,12 +4741,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Errore @@ -4864,11 +4880,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Esecuzione strumento interrotta @@ -4945,19 +4961,24 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Impossibile aggiungere ellisse - + Failed to rotate Impossibile ruotare - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Scalatura non riuscita - + Failed to translate - Impossibile tradurre + Traslazione fallita @@ -5113,12 +5134,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Elimina geometrie originali (U) - + Apply equal constraints Applica vincoli uguali - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Se questa opzione è selezionata, i vincoli dimensionali sono esclusi dall'operazione. @@ -5483,7 +5504,7 @@ Invece vengono applicati vincoli uguali tra gli oggetti originali e le loro copi TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copie (+'U'/ -'J') @@ -5504,7 +5525,7 @@ Invece vengono applicati vincoli uguali tra gli oggetti originali e le loro copi TaskSketcherTool_c1_scale - + Keep original geometries (U) Mantieni le geometrie originali (U) @@ -5525,7 +5546,7 @@ Invece vengono applicati vincoli uguali tra gli oggetti originali e le loro copi TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copie (+'U'/ -'J') @@ -5533,7 +5554,7 @@ Invece vengono applicati vincoli uguali tra gli oggetti originali e le loro copi TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Righe (+'R'/-'F') @@ -5676,12 +5697,12 @@ Invece vengono applicati vincoli uguali tra gli oggetti originali e le loro copi TaskSketcherTool_c1_translate - + Apply equal constraints Applica vincoli uguali - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Se questa opzione è selezionata, i vincoli dimensionali sono esclusi dall'operazione. @@ -5859,7 +5880,7 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Angular step for tools that use 'Snap at angle'. Hold Ctrl to enable 'Snap at angle'. The angle starts from the positive X axis of the sketch. - Angular step for tools that use 'Snap at angle'. Hold Ctrl to enable 'Snap at angle'. The angle starts from the positive X axis of the sketch. + Passo angolare per gli strumenti che usano 'Snap all'angolo' (per esempio la linea). Tenere premuto CTRL per abilitare 'Aggancia ad angolo'. L'angolo parte dall'asse X positivo dello schizzo. @@ -7833,25 +7854,25 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Ruota i parametri @@ -7859,17 +7880,17 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parametri di scala @@ -7918,24 +7939,24 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della SketcherGui::DrawSketchHandlerTranslate - + Translate parameters - Traduci parametri + Parametri traslazione - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index b830217203..9be3d12fa1 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -850,27 +850,27 @@ invalid constraints, and degenerate geometry スケッチ拘束の名前を変更 - + Drag Point 点をドラッグ - + Drag Curve 曲線をドラッグ - + Drag geometries ジオメトリーをドラッグ - + Drag Constraint 拘束をドラッグ - + Modify sketch constraints スケッチ拘束を変更 @@ -895,17 +895,17 @@ invalid constraints, and degenerate geometry スケッチに円弧状の長円形を追加 - + Rotate geometries ジオメトリを回転 - + Scale geometries ジオメトリの拡大縮小 - + Translate geometries ジオメトリを移動 @@ -3100,49 +3100,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 表示 - + Font size フォントサイズ - + + px px - + View scale ratio 表示の拡大縮小率 - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. 拘束やカーソル座標には基本長さ単位は表示されません。 「米ヤード・ポンド法」と「建築 US/ユーロ」を除く全ての単位系をサポートしています。 - + Segments per geometry ジオメトリーあたりのセグメント - + Ask for value after creating a dimensional constraint 寸法拘束を作成した後に値を入力 - + Geometry creation "Continue Mode" ジオメトリ作成「続行モード」 - + Constraint creation "Continue Mode" 拘束作成「続行モード」 - + Hide base length units for supported unit systems サポートされている単位系の基本単位を非表示 @@ -3152,119 +3153,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. スケッチ編集 - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation ジオメトリー近似で使用されるポリゴン数 - + Displays names of dimensional constraints, if they exist 寸法拘束の名前が存在する場合は表示 - + Show dimensional constraint name with format フォーマットで寸法拘束名を表示する - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints ラベルと拘束で使用されるフォントサイズ - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation 表示の自動化 - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch スケッチを閉じた後にカメラ位置を復元 - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. スケッチを編集時にカメラを強制的に正投影表示にします。 「編集後にカメラ位置を復元」が有効な場合にのみ動作します。 - + Opens a sketch in section view mode, showing only objects behind the sketch plane スケッチの背後にあるオブジェクトのみを表示する断面ビューモードでスケッチを開く - + Open sketch in section view mode 断面ビューモードでスケッチを開く - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches 既存のスケッチに適用 - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3277,47 +3293,47 @@ Defaults to: %N = %V %V - 寸法値 - + Use system decimals setting for cursor coordinates カーソル座標にシステムの小数点設定を使用 - + Hide all objects that depend on the sketch スケッチに依存している全てのオブジェクトを非表示 - + Show objects used for external geometry 外部ジオメトリで使用されているオブジェクトを表示 - + Show objects that the sketch is attached to スケッチがアタッチされているオブジェクトを表示 - + Restore camera position after editing 編集後にカメラ位置を元に戻す - + Force orthographic camera when entering edit 編集開始時に正投影カメラを設定 - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. 注意: これらの設定は新しいスケッチへ適用されるデフォルトです。動作は各スケッチごとにビュータブのプロパティーとして記憶されます。 - + Unexpected C++ exception 予期しない C++ 例外 - + Sketcher スケッチャー @@ -3884,119 +3900,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - + The sketch is invalid and cannot be edited. スケッチが不正で、編集できません。 - + The following constraint is partially redundant: 以下の拘束は一部が冗長です: - + The following constraints are partially redundant: 以下の拘束は一部が冗長です: - + Edit Sketch スケッチを編集 - + Close this dialog? このダイアログを閉じますか？ - + Invalid Sketch 無効なスケッチ - + Open the sketch validation tool? スケッチ検証ツールを開きますか？ - + Remove the following constraint: 以下の拘束を削除してください： - + Remove at least one of the following constraints: 以下の拘束から少なくとも1つを削除してください： - + Remove the following redundant constraint: 以下の冗長な拘束を削除してください： - + Remove the following redundant constraints: 以下の冗長な拘束を削除してください： - + Remove the following malformed constraint: 以下の不正な拘束を削除してください： - + Remove the following malformed constraints: 以下の不正な拘束を削除してください： - + Empty sketch スケッチが空です - + Over-constrained: 過剰拘束: - + Malformed constraints: 不正な拘束: - + Redundant constraints: 冗長な拘束: - + Partially redundant: 部分的に冗長: - + Solver failed to converge ソルバーの収束に失敗 - + Under-constrained: 未拘束: - + %n Degrees of Freedom %n 自由度 - + Fully constrained 完全拘束 @@ -4475,7 +4491,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more %1 以上 @@ -4719,12 +4735,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error エラー @@ -4858,11 +4874,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted ツールの実行が中止されました。 @@ -4939,17 +4955,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.楕円を追加できませんでした。 - + Failed to rotate 回転に失敗しました。 - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale 拡大縮小に失敗しました。 - + Failed to translate 移動に失敗しました。 @@ -5107,12 +5128,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.元のジオメトリを削除 (U) - + Apply equal constraints 等値拘束を適用 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. このオプションが選択されている場合、寸法拘束は操作から除外されます。 @@ -5477,7 +5498,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') コピー (+'U'/ -'J') @@ -5498,7 +5519,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) 元のジオメトリを保持 (U) @@ -5519,7 +5540,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') コピー (+'U'/ -'J') @@ -5527,7 +5548,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') 行 (+'R'/-'F') @@ -5670,12 +5691,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints 等値拘束を適用 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. このオプションが選択されている場合、寸法拘束は操作から除外されます。 @@ -7827,25 +7848,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters 回転パラメーター @@ -7853,17 +7874,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters 拡大縮小パラメーター @@ -7912,24 +7933,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters 移動パラメーター - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts index 7486b922d9..31c309e6b5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry ესკიზის შეზღუდვისთვის სახელის გადარქმევა - + Drag Point გადაათრიეთ წერტილი - + Drag Curve რკალის გადათრევა - + Drag geometries გეომეტრიების გადათრევა - + Drag Constraint შეზღუდვის გადათრევა - + Modify sketch constraints ესკიზის შეზღუდვების ჩასწორება @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry ესკიზის რკალის სლოტის დამატება - + Rotate geometries გეომეტრიების შებრუნება - + Scale geometries გეომეტრიების მასშტაბი - + Translate geometries გეომეტრიების მოძრაობითი გადატანა @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always ჩვენება - + Font size ფონტის ზომა - + + px პქს - + View scale ratio მასშტაბის კოეფიციენტის ნახვა - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. საზომი ერთეულები შეზღუდვებში და კურსორის კოორდნატებში ნაჩვენები არ ქნება. გააჩნია ყველა საზომი ერთეულის მხარდაჭერა, გარდა "US საბაჟო" და "სამშენებლო აშშ/ევრო"-ის. - + Segments per geometry გეომეტრიის სეგმენტების რიცხვი - + Ask for value after creating a dimensional constraint ზომის შეზღუდვის შექმნისას მნიშვნელობის კითხვა - + Geometry creation "Continue Mode" გეომეტრიის შექმნის "გაგრძელების რეჟიმი" - + Constraint creation "Continue Mode" შეზღუდვების შექმნის "გაგრძელების რეჟიმი" - + Hide base length units for supported unit systems მხარდაჭერილი ერთეული ერთეულებისთვის ბაზის სიგრძის ერთეულების დამალვა @@ -3156,119 +3157,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. ესკიზის ჩასწორება - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor გაადიდებს 3D ხედს ამ კოეფიციენტზე დამოკიდებულებით - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format ზომის შეზღუდვის ფორმატირებული სახელის ჩვენება - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints ჭდეებისთვის და შეზღუდვებისთვის გამოყენებული ფონტის ზომა - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation ხილვადობის ავტომატიზაცია - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to აჩვენებს ობიექტებს, რომელზეც ღია ესკიზია მიმაგრებული - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode ესკიზის გახსნა კვეთის ხედის რეჟიმში - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches გადატარება არსებულ ესკიზებზე - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Defaults to: %N = %V %V - ზომის მნიშვნელობა - + Use system decimals setting for cursor coordinates კურსორის კოორდინატებისთვის სისტემური წილადების პარამეტრის გამოყენება - + Hide all objects that depend on the sketch ყველა ობიექტის, რომელიც ესკიზზეა დამოკიდებული, დამალვა - + Show objects used for external geometry გარე გეომეტრიისთვის გამოყენებული ობიექტების ჩვენება - + Show objects that the sketch is attached to ესკიზზე მიბმული ობიექტების ჩვენება - + Restore camera position after editing კამერის პოზიციის აღდგენა ჩასწორების დასრულების შემდეგ - + Force orthographic camera when entering edit ჩასწორების რეჟიში გადასვლისას ორთგრაფიული კამერის ავტომატური ჩართვა - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. შენიშვნა: ეს პარამეტრები წარმოადნენ ახალ ესკიზებზე გადატარებულ ნაგულისხმევ მნისვნელობებს. ეს ქცევა ცალცალკეა დამახსოვრებული ესკიზის ხედის ჩანართის თვისებებში. - + Unexpected C++ exception C++-ის გაუთვალისწინებელი შეცდომა - + Sketcher ესკიზმქმნელი @@ -3888,112 +3904,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. ესკიზი არასწორია. მისი ჩასწორება შეუძლებელია. - + The following constraint is partially redundant: ეს შეზღუდვა ნაწილობრივ დამატებითია: - + The following constraints are partially redundant: ეს შეზღუდვები ნაწილობრივ დამატებითია: - + Edit Sketch ესკიზის ჩასწორება - + Close this dialog? დავხურო ეს დიალოგი? - + Invalid Sketch არასწორი ესკიზი - + Open the sketch validation tool? გავხსნა ესკიზის შემოწმების ხელსაწყო? - + Remove the following constraint: წაიშლება შემდეგი შეზღუდვები: - + Remove at least one of the following constraints: მოიღეთ, მინიმუმ, ერთ-ერთი შემდეგი შეზღუდვა: - + Remove the following redundant constraint: წაშალეთ შემდეგი დამატებითი შეზღუდვა: - + Remove the following redundant constraints: წაშალეთ შემდეგი დამატებითი შეზღუდვები: - + Remove the following malformed constraint: წაშალეთ შემდეგი დეფორმირებული შეზღუდვა: - + Remove the following malformed constraints: წაშალეთ შემდეგი დეფორმირებული შეზღუდვები: - + Empty sketch ცარიელი ესკიზი - + Over-constrained: ზედმეტად-შეზღუდული: - + Malformed constraints: არასწორად შექმნილი შეზღუდვები: - + Redundant constraints: დამატებითი შეზღუდვები: - + Partially redundant: ნაწილობრივ დამატებითი: - + Solver failed to converge ამომხსნელის შეცდომა შეერთების დროს - + Under-constrained: საკმარისზე ნაკლებად შეზღუდული: - + %n Degrees of Freedom %n თავისუფლების ხარისხი @@ -4001,7 +4017,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained სრულად შეზღუდული @@ -4483,7 +4499,7 @@ Eigen Sparse QR ალგორითმი ოპტიმიზებული ViewProviderSketch - + and %1 more და %1 სხვა @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error შეცდომა @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted ხელსაწყოს შესრულება შეწყდა @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.ოვალის დამატების შეცდომა - + Failed to rotate შებრუნების შეცდომა - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale დამასშტაბების შეცდომა - + Failed to translate მოძრაობითი გადატანა ჩავარდა @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.ორიგინალი გეომეტრიების წაშლა (U) - + Apply equal constraints ტოლი შეზღუდვების გადატარება - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. თუ ეს პარამეტრი ჩართულია, განზომილების შეზღუდვები ოპერაციიდან ამოღებული იქნება. @@ -5424,7 +5445,7 @@ Instead equal constraints are applied between the original objects and their cop Line Type - Line Type + ხაზის ტიპი @@ -5485,7 +5506,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') ასლები (+'U'/ -'J') @@ -5506,7 +5527,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) ორიგინალი გეომეტრიების შენარჩუნება (U) @@ -5527,7 +5548,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') ასლები (+'U'/-'J') @@ -5535,7 +5556,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') მწკრივები (+'R'/-'F') @@ -5678,12 +5699,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints ტოლი შეზღუდვების გადატარება - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. თუ ეს პარამეტრი ჩართულია, განზომილების შეზღუდვები ოპერაციიდან ამოღებული იქნება. @@ -7835,25 +7856,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 მიუთითეთ ცენტრის წერტილი - + %1 set start angle Sketcher Rotate: hint %1 დააყენეთ საწყისი კუთხე - + %1 set rotation angle Sketcher Rotate: hint %1 დააყენეთ ბრუნვის კუთხე - + Rotate parameters შებრუნების პარამეტრები @@ -7861,17 +7882,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 მიუთითეთ მიმართვის წერტილი - + %1 set scale factor %1 მიუთითეთ მასშტაბის კოეფიციენტი - + Scale parameters მასშტაბის მორგება @@ -7920,24 +7941,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters პარამეტრების მოძრაობითი გადატანა - + %1 pick reference point Sketcher Translate: hint %1 მიუთითეთ მიმართვის წერტილი - + %1 set translation vector Sketcher Translate: hint %1 დააყენეთ გადატანითი მოძრაობის ვექტორი - + %1 set second translation vector Sketcher Translate: hint %1 დააყენეთ მეორე გადატანითი მოძრაობის ვექტორი diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts index 4691f54210..85414485ff 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry 스케치 구속 이름 바꾸기 - + Drag Point 점 끌기 - + Drag Curve 곡선 끌기 - + Drag geometries Drag geometries - + Drag Constraint 구속 끌기 - + Modify sketch constraints 스케치 구속 수정하기 @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry 호 형태의 홈 생성 - + Rotate geometries 도형을 회전 - + Scale geometries 도형을 배율변환 - + Translate geometries 도형을 변환 @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 화면 - + Font size 글꼴 크기 - + + px px - + View scale ratio View scale ratio - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. 기본 길이 단위는 구속 또는 커서 좌표에 표시되지 않습니다. '미국 관습' 및 '건축 미국/유로'를 제외한 모든 단위 시스템을 지원합니다. - + Segments per geometry 도형 당 분절 수 - + Ask for value after creating a dimensional constraint 치수 구속 생성 직후 치수값 요청 - + Geometry creation "Continue Mode" 도형 생성 "계속 모드" - + Constraint creation "Continue Mode" 구속 생성 "계속 모드" - + Hide base length units for supported unit systems 지원되는 단위계의 기본 길이 단위를 숨김 @@ -3156,119 +3157,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format 형식과 함께 치수 구속 이름 표시 - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3282,47 +3298,47 @@ Defaults to: %N = %V %V - 치수 값 - + Use system decimals setting for cursor coordinates 커서의 좌표에 시스템의 소수점 설정을 사용합니다. - + Hide all objects that depend on the sketch 스케치에 의존하는 모든 대상체를 숨깁니다 - + Show objects used for external geometry 외부 도형에 사용된 대상체 표시 - + Show objects that the sketch is attached to 스케치가 부착된 객체를 보이기 - + Restore camera position after editing 수정 후에 카메라 위치를 복구 - + Force orthographic camera when entering edit 스케치 편집시 직교 카메라 강제 적용 - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - + Unexpected C++ exception 예기치 않은 C++ 예외 - + Sketcher 스케치 작업대 @@ -3889,119 +3905,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. - + The sketch is invalid and cannot be edited. 스키체가 유효하지 않으므로 수정할 수 없습니다. - + The following constraint is partially redundant: 아래의 구속은 부분적으로 중복됩니다: - + The following constraints are partially redundant: 아래의 구속들은 부분적으로 중복됩니다. - + Edit Sketch Edit Sketch - + Close this dialog? 이 대화창을 닫을까요? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch 빈 스케치 - + Over-constrained: 과도한 구속: - + Malformed constraints: 잘못된 구속들 - + Redundant constraints: 중복되는 구속들: - + Partially redundant: 부분적인 중복: - + Solver failed to converge Solver failed to converge - + Under-constrained: 구속되지 않음: - + %n Degrees of Freedom %n Degrees of Freedom - + Fully constrained 완전히 구속됨 @@ -4481,7 +4497,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -4725,12 +4741,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error 오류 @@ -4864,11 +4880,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4945,17 +4961,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.타원 추가 실패 - + Failed to rotate 회전 실패 - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale 배율 변환 실패 - + Failed to translate Failed to translate @@ -5113,12 +5134,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.기존의 기하요소는 제거합니다(U) - + Apply equal constraints 동일구속 적용 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. 이것을 선택하면 치수 구속이 작업에서 제외됩니다. @@ -5483,7 +5504,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') 복사본 (+'U'/-'J') @@ -5504,7 +5525,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) 원본 도형 유지(U) @@ -5525,7 +5546,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') 복사본 (+'U'/-'J') @@ -5533,7 +5554,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') 열 (+'R'/-'F') @@ -5676,12 +5697,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints 동일구속 적용 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. 이것을 선택하면 치수 구속이 작업에서 제외됩니다. @@ -7833,25 +7854,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters 회전 매개변수 @@ -7859,17 +7880,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters 배율 매개변수 @@ -7918,24 +7939,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters 변환 매개변수 - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index dc875c8c59..b3f32004b5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Hernoem schets beperking - + Drag Point Sleeppunt - + Drag Curve Sleep Kromme - + Drag geometries Drag geometries - + Drag Constraint Sleep beperking - + Modify sketch constraints Wijzig schets beperkingen @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Boog-sleuf toevoegen in schets - + Rotate geometries Roteer geometrieën - + Scale geometries Schaal geometriën - + Translate geometries Verplaats geometrieën @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Weergave - + Font size Lettergrootte - + + px px - + View scale ratio Weergave schaal verhouding - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Basis lengte-eenheden zullen niet worden weergegeven in beperkingen of cursor coördinaten. Ondersteunt alle eenheid systemen behalve 'US customary ' en 'Building US/Euro'. - + Segments per geometry Segmenten per geometrie - + Ask for value after creating a dimensional constraint Vraag naar waarde na het maken van een dimensie constraint - + Geometry creation "Continue Mode" Geometriecreatie "Vervolgmodus" - + Constraint creation "Continue Mode" Creatie van beperking "Vervolgmodus" - + Hide base length units for supported unit systems Verberg basislengte-eenheden voor ondersteunde eenheidssystemen @@ -3156,119 +3157,134 @@ Ondersteunt alle eenheid systemen behalve 'US customary ' en 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Toon maatbeperking naam met lay-out - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Standaard: %N = %V %V - waarde van de maat - + Use system decimals setting for cursor coordinates Gebruik de systeem instellingen van decimalen voor de cursor coördinaten - + Hide all objects that depend on the sketch Verberg alle objecten die afhankelijk zijn van de schets - + Show objects used for external geometry Objecten tonen die gebruikt worden voor externe geometrie - + Show objects that the sketch is attached to Objecten weergeven waaraan de schets is bevestigd - + Restore camera position after editing Herstel de camerapositie na de bewerking - + Force orthographic camera when entering edit Activeer orthografische camera als bewerkingsmodus wordt gestart - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Opmerking: deze instellingen worden standaard toegepast op nieuwe schetsen. Het gedrag wordt onthouden voor elke schets afzonderlijk als eigenschappen op het Weergave tabblad. - + Unexpected C++ exception Onverwachte C++ uitzondering - + Sketcher Sketcher @@ -3888,112 +3904,112 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - + The sketch is invalid and cannot be edited. De schets is ongeldig en kan niet worden bewerkt. - + The following constraint is partially redundant: De volgende beperking is gedeeltelijk overbodig: - + The following constraints are partially redundant: De volgende beperkingen zijn gedeeltelijk overbodig: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Lege schets - + Over-constrained: Over-bepaald: - + Malformed constraints: Ongeldige beperkingen: - + Redundant constraints: Overbodige beperkingen: - + Partially redundant: Gedeeltelijk overbodig: - + Solver failed to converge Solver kon niet convergeren - + Under-constrained: Onbepaald: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. - + Fully constrained Volledig bepaald @@ -4483,7 +4499,7 @@ Eigen Sparse-QR-algoritme is geoptimaliseerd voor spaarzame matrices; meestal sn ViewProviderSketch - + and %1 more en %1 meer @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Fout @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Failed to add ellipse - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Vertalen mislukt @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Delete original geometries (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5485,7 +5506,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5506,7 +5527,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Keep original geometries (U) @@ -5527,7 +5548,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copies (+'U'/-'J') @@ -5535,7 +5556,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rows (+'R'/-'F') @@ -5678,12 +5699,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7835,25 +7856,25 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotate parameters @@ -7861,17 +7882,17 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Scale parameters @@ -7920,24 +7941,24 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parameters vertalen - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index e02aef8a26..bebf68e4ee 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -19,12 +19,12 @@ Radius/Diameter Dimension - Radius/Diameter Dimension + Rozmiar promienia / średnicy Constrains the radius or diameter of an arc or a circle - Constrains the radius or diameter of an arc or a circle + Nakłada wiązanie na promień lub średnicę łuku bądź koła. @@ -60,7 +60,7 @@ Modify Knot Multiplicity - Modify Knot Multiplicity + Zmodyfikuj wielokrotność węzłów @@ -83,12 +83,12 @@ Geometry to B-Spline - Geometry to B-Spline + Geometria na krzywą parametryczną Converts the selected geometry to B-splines - Converts the selected geometry to B-splines + Konwertuje wybraną geometrię do krzywej parametrycznej @@ -109,7 +109,7 @@ Decrease B-Spline Degree - Decrease B-Spline Degree + Zmniejsz stopień krzywej parametrycznej @@ -122,7 +122,7 @@ Decrease Knot Multiplicity - Decrease Knot Multiplicity + Zmniejsz wielokrotność węzła @@ -135,7 +135,7 @@ Increase B-Spline Degree - Increase B-Spline Degree + Zwiększ stopień krzywej parametrycznej @@ -148,7 +148,7 @@ Increase Knot Multiplicity - Increase Knot Multiplicity + Zwiększ wielokrotność węzła @@ -161,12 +161,12 @@ Attach Sketch - Attach Sketch + Dołącz szkic Attaches a sketch to the selected geometry element - Attaches a sketch to the selected geometry element + Dołącza szkic do wybranego elementu geometrii @@ -179,12 +179,12 @@ Merge Sketches - Merge Sketches + Połacz szkice Creates a new sketch by merging at least 2 selected sketches - Creates a new sketch by merging at least 2 selected sketches + Tworzy nowy szkic poprzez połączenie co najmniej dwóch wybranych szkiców @@ -194,7 +194,7 @@ Select at least 2 sketches - Select at least 2 sketches + Wybierz co najmniej dwa szkice @@ -202,16 +202,15 @@ Mirror Sketch - Mirror Sketch + Odbicie lustrzane Creates a new mirrored sketch for each selected sketch by using the X or Y axes, or the origin point, as mirroring reference - Creates a new mirrored sketch for each selected sketch -by using the X or Y axes, or the origin point, -as mirroring reference + Tworzy nowy szkic lustrzany dla każdego wybranego szkicu, +używając osi X lub Y albo punktu odniesienia położenia jako punktu odniesienia do odbicia lustrzanego @@ -221,7 +220,7 @@ as mirroring reference Select at least 1 sketch - Select at least 1 sketch + Wybierz co najmniej jeden szkic @@ -242,7 +241,7 @@ as mirroring reference Rectangular Array - Rectangular Array + Szyk prostokątny @@ -255,7 +254,7 @@ as mirroring reference Switch Virtual Space - Switch Virtual Space + Przełącz przestrzeń wirtualną @@ -270,14 +269,14 @@ na inną przestrzeń wirtualną. Validate Sketch - Validate Sketch + Sprawdź poprawność szkicu Validates a sketch by checking for missing coincidences, invalid constraints, and degenerate geometry - Validates a sketch by checking for missing coincidences, -invalid constraints, and degenerate geometry + Sprawdza poprawność szkicu, kontrolując brakujące zbieżności, +nieprawidłowe ograniczenia oraz zdegradowaną geometrię. @@ -287,7 +286,7 @@ invalid constraints, and degenerate geometry Select only 1 sketch. - Select only 1 sketch. + Wybierz tylko jeden szkic. @@ -495,12 +494,12 @@ invalid constraints, and degenerate geometry Add point to line distance constraint - Add point to line distance constraint + Dodaj wiązanie odległości punktu od linii Add point to circle distance constraint - Add point to circle distance constraint + Dodaj wiązanie odległości punktu od okręgu @@ -855,27 +854,27 @@ invalid constraints, and degenerate geometry Zmień nazwę wiązania szkicu - + Drag Point Przeciągnij punkt - + Drag Curve Przeciągnij krzywą - + Drag geometries Przeciągnij geometrie - + Drag Constraint Przeciągnij wiązanie - + Modify sketch constraints Modyfikuj wiązania szkicu @@ -900,17 +899,17 @@ invalid constraints, and degenerate geometry Dodaj szczelinę łukową do szkicu - + Rotate geometries Obróć geometrie - + Scale geometries Skaluj geometrie - + Translate geometries Geometrie do przekształcenia @@ -938,14 +937,14 @@ invalid constraints, and degenerate geometry Add Auto-Constraints - Add Auto-Constraints + Dodaj wiązania automatycznie Add Sketch B-Spline - Add Sketch B-Spline + Dodaj szkic krzywej parametrycznej @@ -1122,12 +1121,12 @@ invalid constraints, and degenerate geometry Cannot map the sketch to the selected object. %1. - Cannot map the sketch to the selected object. %1. + Nie można mapować szkicu do wybranego obiektu. %1. Do not attach - Do not attach + Nie dołączaj @@ -1289,7 +1288,7 @@ invalid constraints, and degenerate geometry Select edges from the sketch - Select edges from the sketch + Wybierz krawędź(ie) na szkicu @@ -1660,32 +1659,32 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow One or two point-on-object constraints were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point-on-object constraints were deleted, since the latest constraint being applied internally applies point-on-object as well. + Jedno lub dwa wiązania punkt na obiekcie zostały usunięte, ponieważ ostatnio stosowane wiązanie wewnętrznie również stosuje punkt na obiekcie. Keep notifying about constraint substitutions - Keep notifying about constraint substitutions + Powiadamiaj mnie o zastępowaniu wiązań Unexpected error. More information may be available in the report view. - Unexpected error. More information may be available in the report view. + Nieoczekiwany błąd. Więcej informacji może być dostępnych w Widoku raportu. Only the sketch and its support are allowed to be selected - Only the sketch and its support are allowed to be selected + Dozwolone jest wybieranie tylko szkicu i jego wsparcia Only the sketch and its support may be selected - Only the sketch and its support may be selected + Dozwolone jest wybieranie tylko szkicu i jego wsparcia Only the sketch and its support may be selected - Only the sketch and its support may be selected + Dozwolone jest wybieranie tylko szkicu i jego wsparcia @@ -2738,7 +2737,7 @@ Przytrzymaj Ctrl + Alt, aby to zignorować. Choose Orientation - Choose Orientation + Wybierz orientację @@ -2817,8 +2816,8 @@ Przytrzymaj Ctrl + Alt, aby to zignorować. Substitutes dimensional constraints by geometric constraints in the copies, so that a change in the original element is reflected on copies - Substitutes dimensional constraints by geometric constraints -in the copies, so that a change in the original element is reflected on copies + Zastępuje wiązania wymiarowe wiązaniami geometrycznymi w kopiach, +tak aby zmiana w oryginalnym elemencie była odzwierciedlana w kopiach. @@ -3116,49 +3115,50 @@ Pozycje to pozycja (x, y) kursora. Na przykład dla środka okręgu.Wyświetlanie - + Font size Rozmiar czcionki - + + px px - + View scale ratio Wyświetl współczynnik skali - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Bazowe jednostki długości nie będą wyświetlane w wiązaniach ani współrzędnych kursora. Obsługuje wszystkie systemy jednostek oprócz "zwyczajowego USA" i "budowlanego USA/EURO". - + Segments per geometry Ilość odcinków w geometrii - + Ask for value after creating a dimensional constraint Spytaj o wartość po stworzeniu wiązania wymiaru - + Geometry creation "Continue Mode" Tworzenie geometrii "Tryb kontynuacji" - + Constraint creation "Continue Mode" Tworzenie wiązań "Tryb kontynuacji" - + Hide base length units for supported unit systems Ukryj jednostki długości podstawowej dla obsługiwanych systemów jednostek @@ -3168,119 +3168,134 @@ Obsługuje wszystkie systemy jednostek oprócz "zwyczajowego USA" i "budowlanego Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Pokaż nazwę wiązania wymiaru w formacie - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3293,47 +3308,47 @@ Domyślnie to: %N = %V %V - wartość wymiaru - + Use system decimals setting for cursor coordinates Użyj ustawień systemowych dla wartości dziesiętnych dla współrzędnych kursora - + Hide all objects that depend on the sketch Ukryj wszystkie obiekty zależne od szkicu - + Show objects used for external geometry Pokaż obiekty użyte w geometrii zewnętrznej - + Show objects that the sketch is attached to Pokaż obiekty, do których szkic jest dołączony - + Restore camera position after editing Przywróć położenie ujęcia widoku po zakończeniu edycji - + Force orthographic camera when entering edit Wymuś ortogonalne ujęcie widoku przy wejściu w tryb edycji - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Uwaga: te ustawienia są domyślnie stosowane do nowych szkiców. Ta akcja jest zapamiętane dla każdego szkicu indywidualnie jako właściwość w zakładce widoku. - + Unexpected C++ exception Nieoczekiwany wyjątek C++ - + Sketcher Szkicownik @@ -3902,112 +3917,112 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - + The sketch is invalid and cannot be edited. Szkic jest nieprawidłowy i nie może być edytowany. - + The following constraint is partially redundant: Następujące wiązanie jest częściowo zbędne: - + The following constraints are partially redundant: Następujące wiązania są częściowo zbędne: - + Edit Sketch Edit Sketch - + Close this dialog? - Close this dialog? + Zamknąć to okno dialogowe? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Pusty szkic - + Over-constrained: Wiązania nadmierne: - + Malformed constraints: Uszkodzone ograniczenia: - + Redundant constraints: Wiązania nadmiarowe: - + Partially redundant: Częściowo nadmiarowe: - + Solver failed to converge Solver nie osiągnął zbieżności - + Under-constrained: Niedostatecznie związane: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4017,7 +4032,7 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. - + Fully constrained W pełni związany @@ -4501,7 +4516,7 @@ Eigen Sparse QR, algorytm jest zoptymalizowany dla macierzy rzadkich, zwykle szy ViewProviderSketch - + and %1 more i %1 więcej @@ -4744,12 +4759,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Błąd @@ -4884,11 +4899,11 @@ Krzywe złożone i punkty nie są jeszcze obsługiwane. - - + + - + Tool execution aborted Wykonanie operacji zostało przerwane @@ -4967,17 +4982,22 @@ Sprawdź wiązania i wiązania automatyczne dotyczące tej operacji.Nie udało się dodać elipsy - + Failed to rotate Nie udało się wykonać obrotu - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Skalowanie nie udało się - + Failed to translate Przekształcenie nie powiodło się @@ -5137,12 +5157,12 @@ Sprawdź wiązania i wiązania automatyczne dotyczące tej operacji.Usuń oryginalne geometrie (U) - + Apply equal constraints Zastosuj wiązanie równości - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Jeśli ta opcja jest zaznaczona, wiązania wymiarowe są wyłączone z operacji. @@ -5446,7 +5466,7 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami Line Type - Line Type + Typ linii @@ -5507,7 +5527,7 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Kopiuj (+ U / - J) @@ -5528,7 +5548,7 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami TaskSketcherTool_c1_scale - + Keep original geometries (U) Zachowaj oryginalne geometrie (U) @@ -5549,7 +5569,7 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Kopiuj (+ U / - J) @@ -5557,7 +5577,7 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Wiersze (+ R / - F) @@ -5701,12 +5721,12 @@ aby cofnąć ostatni punkt. TaskSketcherTool_c1_translate - + Apply equal constraints Zastosuj wiązanie równości - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Jeśli ta opcja jest zaznaczona, wiązania wymiarowe są wyłączone z operacji. @@ -5776,8 +5796,8 @@ Zamiast tego stosuje się wiązania równości pomiędzy oryginalnymi obiektami Places the selected sketch on one of the global coordinate planes. This will clear the AttachmentSupport property. - Places the selected sketch on one of the global coordinate planes. -This will clear the AttachmentSupport property. + Umieszcza wybrany szkic na jednej z globalnych płaszczyzn układu współrzędnych. +Spowoduje to wyczyszczenie właściwości AttachmentSupport. @@ -6096,7 +6116,8 @@ Przyciągają się również do środka linii i łuków. Constrains the vertical distance between two points, or from a point to the origin if one is selected - Constrains the vertical distance between two points, or from a point to the origin if one is selected + Ogranicza pionową odległość między dwoma punktami lub od punktu do początku układu współrzędnych, +jeśli wybrano tylko jeden punkt. @@ -6109,7 +6130,8 @@ Przyciągają się również do środka linii i łuków. Constrains the horizontal distance between two points, or from a point to the origin if one is selected - Constrains the horizontal distance between two points, or from a point to the origin if one is selected + Ogranicza poziomą odległość między dwoma punktami lub od punktu do początku układu współrzędnych, +jeśli wybrano tylko jeden punkt. @@ -6195,7 +6217,7 @@ Przyciągają się również do środka linii i łuków. Radius/Diameter Dimension - Radius/Diameter Dimension + Rozmiar promienia / średnicy @@ -6923,12 +6945,12 @@ Przyciągają się również do środka linii i łuków. Toggle B-Spline Degree - Toggle B-Spline Degree + Przełącz stopień krzywej złożonej Toggles the visibility of the degree for all B-splines - Toggles the visibility of the degree for all B-splines + Przełącza widoczność stopnia dla wszystkich krzywych złożonych @@ -6936,12 +6958,12 @@ Przyciągają się również do środka linii i łuków. Toggle B-Spline Control Polygon - Toggle B-Spline Control Polygon + Przełącz wielokąt kontrolny krzywej złożonej Toggles the visibility of the control polygons for all B-splines - Toggles the visibility of the control polygons for all B-splines + Przełącza widoczność wielokątów kontrolnych dla wszystkich krzywych złożonych @@ -6949,7 +6971,7 @@ Przyciągają się również do środka linii i łuków. Toggle B-Spline Curvature Comb - Toggle B-Spline Curvature Comb + Przełącz krzywiznę grzebienia krzywej złożonej. @@ -6967,7 +6989,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the knot multiplicity for all B-splines - Toggles the visibility of the knot multiplicity for all B-splines + Przełącza widoczność wielokrotności węzłów dla wszystkich krzywych parametrycznych @@ -6975,12 +6997,12 @@ Przyciągają się również do środka linii i łuków. Toggle B-Spline Control Point Weight - Toggle B-Spline Control Point Weight + Przełącz wagę punktu kontrolnego krzywej złożonej Toggles the visibility of control point weights for all B-splines - Toggles the visibility of control point weights for all B-splines + Przełącza widoczność wag punktów kontrolnych dla wszystkich krzywych złożonych. @@ -6988,37 +7010,37 @@ Przyciągają się również do środka linii i łuków. Toggle B-Spline Information Layer - Toggle B-Spline Information Layer + Przełącz warstwę informacyjną krzywej złożonej Toggles the visibility of the information layer for all B-splines - Toggles the visibility of the information layer for all B-splines + Przełącza widoczność warstwy informacyjnej dla wszystkich krzywych złożonych Toggle B-Spline Degree - Toggle B-Spline Degree + Przełącz stopień krzywej złożonej Toggle B-Spline Control Polygon - Toggle B-Spline Control Polygon + Przełącz wielokąt kontrolny krzywej złożonej Toggle B-Spline Curvature Comb - Toggle B-Spline Curvature Comb + Przełącz krzywiznę grzebienia krzywej złożonej. Toggle B-Spline Knot Multiplicity - Toggle B-Spline Knot Multiplicity + Przełącz wielokrotność węzłów krzywej złożonej Toggle B-Spline Control Point Weight - Toggle B-Spline Control Point Weight + Przełącz wagę punktu kontrolnego krzywej złożonej @@ -7027,7 +7049,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the degree for all B-splines - Toggles the visibility of the degree for all B-splines + Przełącza widoczność stopnia dla wszystkich krzywych złożonych @@ -7036,7 +7058,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the control polygons for all B-splines - Toggles the visibility of the control polygons for all B-splines + Przełącza widoczność wielokątów kontrolnych dla wszystkich krzywych złożonych @@ -7045,7 +7067,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the curvature comb for all B-splines - Toggles the visibility of the curvature comb for all B-splines + Przełącza widoczność grzebienia krzywizny dla wszystkich krzywych złożonych @@ -7054,7 +7076,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the knot multiplicity for all B-splines - Toggles the visibility of the knot multiplicity for all B-splines + Przełącza widoczność wielokrotności węzłów dla wszystkich krzywych parametrycznych @@ -7063,7 +7085,7 @@ Przyciągają się również do środka linii i łuków. Toggles the visibility of the control point weight for all B-splines - Toggles the visibility of the control point weight for all B-splines + Przełącza widoczność wag punktów kontrolnych dla wszystkich krzywych parametrycznych @@ -7071,12 +7093,12 @@ Przyciągają się również do środka linii i łuków. Toggle Circular Helper for Arcs - Toggle Circular Helper for Arcs + Przełącz okrąg pomocniczy dla łuków Toggles the visibility of the circular helpers for all arcs - Toggles the visibility of the circular helpers for all arcs + Przełącza widoczność okręgów pomocnych dla wszystkich łuków @@ -7084,12 +7106,12 @@ Przyciągają się również do środka linii i łuków. C&opy Elements - C&opy Elements + K&opiuj elementy Copies the selected geometries and constraints to the clipboard - Copies the selected geometries and constraints to the clipboard + Kopiuje wybrane geometrie i wiązania do schowka @@ -7097,12 +7119,12 @@ Przyciągają się również do środka linii i łuków. C&ut Elements - C&ut Elements + &Wytnij elementy Cuts the selected geometries and constraints to the clipboard - Cuts the selected geometries and constraints to the clipboard + Wycina wybrane geometrie i wiązania do schowka @@ -7110,12 +7132,12 @@ Przyciągają się również do środka linii i łuków. P&aste Elements - P&aste Elements + W&klej elementy Pastes the geometries and constraints from the clipboard into the sketch - Pastes the geometries and constraints from the clipboard into the sketch + Wkleja geometrie i wiązania ze schowka do szkicu @@ -7123,12 +7145,12 @@ Przyciągają się również do środka linii i łuków. Select Associated Constraints - Select Associated Constraints + Zaznacz powiązane więzy Selects the constraints associated with the selected geometrical elements - Selects the constraints associated with the selected geometrical elements + Wybiera wiązania powiązane z wybranymi elementami geometrycznymi @@ -7141,7 +7163,7 @@ Przyciągają się również do środka linii i łuków. Selects the local origin point of the sketch - Selects the local origin point of the sketch + Zaznacza lokalny punkt odniesienia położenia szkicu @@ -7154,7 +7176,7 @@ Przyciągają się również do środka linii i łuków. Selects the local vertical axis of the sketch - Selects the local vertical axis of the sketch + Zaznacza lokalną oś pionową szkicu @@ -7167,7 +7189,7 @@ Przyciągają się również do środka linii i łuków. Selects the local horizontal axis of the sketch - Selects the local horizontal axis of the sketch + Zaznacza lokalną oś poziomą szkicu @@ -7175,12 +7197,12 @@ Przyciągają się również do środka linii i łuków. Select Redundant Constraints - Select Redundant Constraints + Zaznacz wiązania nadmiarowe Selects all redundant constraints - Selects all redundant constraints + Zaznacza wszystkie zbędne wiązania @@ -7188,12 +7210,12 @@ Przyciągają się również do środka linii i łuków. Select Malformed Constraints - Select Malformed Constraints + Zaznacz niepoprawnie zdefiniowane wiązania Selects all malformed constraints - Selects all malformed constraints + Wybiera wszystkie niepoprawnie zdefiniowane wiązania @@ -7201,12 +7223,12 @@ Przyciągają się również do środka linii i łuków. Select Partially Redundant Constraints - Select Partially Redundant Constraints + Wybierz częściowo zbędne wiązania Selects all partially redundant constraints - Selects all partially redundant constraints + Wybiera wszystkie częściowo zbędne wiązania @@ -7214,12 +7236,12 @@ Przyciągają się również do środka linii i łuków. Select Conflicting Constraints - Select Conflicting Constraints + Zaznacz wiązania konfliktowe Selects all conflicting constraints - Selects all conflicting constraints + Wybiera wszystkie wiązania konfliktowe @@ -7227,12 +7249,12 @@ Przyciągają się również do środka linii i łuków. Select Associated Geometry - Select Associated Geometry + Zaznacz powiązaną geometrię Selects the geometrical elements associated with the selected constraints - Selects the geometrical elements associated with the selected constraints + Wybiera elementy geometryczne powiązane z wybranymi wiązaniami @@ -7240,12 +7262,12 @@ Przyciągają się również do środka linii i łuków. Select Under-Constrained Elements - Select Under-Constrained Elements + Zaznacz elementy niedostatecznie związane Selects geometrical elements where the solver still detects unconstrained degrees of freedom - Selects geometrical elements where the solver still detects unconstrained degrees of freedom + Zaznacza elementy geometryczne, dla których solver nadal wykrywa nieokreślone stopnie swobody. @@ -7253,12 +7275,12 @@ Przyciągają się również do środka linii i łuków. Toggle Internal Geometry - Toggle Internal Geometry + Przełącz geometrię wewnętrzną Toggles the visibility of all internal geometry - Toggles the visibility of all internal geometry + Przełącza widoczność całej geometrii wewnętrznej. @@ -7271,7 +7293,7 @@ Przyciągają się również do środka linii i łuków. Creates a mirrored copy of the selected geometry - Creates a mirrored copy of the selected geometry + Tworzy kopię lustrzaną wybranej geometrii @@ -7284,7 +7306,7 @@ Przyciągają się również do środka linii i łuków. Deletes all geometry and their constraints in the current sketch, with the exception of external geometry - Deletes all geometry and their constraints in the current sketch, with the exception of external geometry + Usuwa całą geometrię i jej wiązania z bieżącego rysunku, z wyjątkiem geometrii zewnętrznej @@ -7297,7 +7319,7 @@ Przyciągają się również do środka linii i łuków. Deletes all constraints in the sketch - Deletes all constraints in the sketch + Usuwa wszystkie wiązania ze szkicu @@ -7310,7 +7332,7 @@ Przyciągają się również do środka linii i łuków. Modifies the constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies the constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modyfikuje wiązania, aby usunąć wyrównanie osi, próbując jednocześnie zachować zależność wiązań dla zaznaczenia @@ -7323,7 +7345,9 @@ Przyciągają się również do środka linii i łuków. Offsets the selected geometry: positive values offset outward, negative values inward - Offsets the selected geometry: positive values offset outward, negative values inward + Przesuwa wybraną geometrię: +wartości dodatnie przesuwane na zewnątrz, +wartości ujemne do wewnątrz @@ -7331,12 +7355,12 @@ Przyciągają się również do środka linii i łuków. Rotate / Polar Transform - Rotate / Polar Transform + Obrót / transformacja biegunowa Rotates the selected geometry by creating 'n' copies, enabling circular pattern creation - Rotates the selected geometry by creating 'n' copies, enabling circular pattern creation + Obraca wybraną geometrię, tworząc "n" kopii i umożliwiając tworzenie wzoru kołowego. @@ -7349,7 +7373,7 @@ Przyciągają się również do środka linii i łuków. Scales the selected geometries - Scales the selected geometries + Skaluje wybrane geometrie @@ -7357,12 +7381,13 @@ Przyciągają się również do środka linii i łuków. Move / Array Transform - Move / Array Transform + Przesunięcie / przekształcenie szyku Translates the selected geometries and enables the creation of 'i' * 'j' copies - Translates the selected geometries and enables the creation of 'i' * 'j' copies + Przekształca wybrane geometrie. +Włącza tworzenie i * j kopii @@ -7436,7 +7461,7 @@ Przyciągają się również do środka linii i łuków. %1 pick center point - %1 pick center point + Wybierz punkt środkowy %1 @@ -7497,7 +7522,7 @@ Przyciągają się również do środka linii i łuków. %1 pick slot width - %1 pick slot width + Wybierz szerokość wpustu %1 @@ -7821,13 +7846,13 @@ Przyciągają się również do środka linii i łuków. %1 set corner radius or frame thickness - %1 set corner radius or frame thickness + Ustaw promień narożnika lub grubość ramki %1 %1 set frame thickness - %1 set frame thickness + Grubość ramki %1 @@ -7838,18 +7863,18 @@ Przyciągają się również do środka linii i łuków. %1 pick corner - %1 pick corner + Wybierz narożnik %1 %1 pick second corner - %1 pick second corner + Wybierz drugi narożnik %1 %1 pick third corner - %1 pick third corner + Wybierz trzeci narożnik %1 @@ -7860,25 +7885,25 @@ Przyciągają się również do środka linii i łuków. SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint - %1 pick center point + Wybierz punkt środkowy %1 - + %1 set start angle Sketcher Rotate: hint - %1 set start angle + Wybierz punkt startowy kąta %1 - + %1 set rotation angle Sketcher Rotate: hint - %1 set rotation angle + Ustaw kąt obrotu %1 - + Rotate parameters Parametry obrotu @@ -7886,17 +7911,17 @@ Przyciągają się również do środka linii i łuków. SketcherGui::DrawSketchHandlerScale - + %1 pick reference point - %1 pick reference point + Wybierz punkt odniesienia %1 - + %1 set scale factor - %1 set scale factor + Ustaw współczynnik skali %1 - + Scale parameters Parametry skali @@ -7906,17 +7931,17 @@ Przyciągają się również do środka linii i łuków. %1 pick slot start point - %1 pick slot start point + Wybierz punkt początkowy wpustu %1 %1 pick slot end point - %1 pick slot end point + Wybierz punkt końcowy wpustu %1 %1 pick slot width - %1 pick slot width + Wybierz szerokość wpustu %1 @@ -7925,7 +7950,7 @@ Przyciągają się również do środka linii i łuków. %1 pick location on edge to split Sketcher Splitting: hint - %1 pick location on edge to split + Wybierz lokalizację na krawędzi do podzielenia %1 @@ -7939,33 +7964,33 @@ Przyciągają się również do środka linii i łuków. %1 pick axis, edge, or point Sketcher Symmetry: hint - %1 pick axis, edge, or point + Wybierz oś, krawędź lub punkt %1 SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parametry przekształcenia - + %1 pick reference point Sketcher Translate: hint - %1 pick reference point + Wybierz punkt odniesienia %1 - + %1 set translation vector Sketcher Translate: hint - %1 set translation vector + Ustaw wektor przekształcenia %1 - + %1 set second translation vector Sketcher Translate: hint - %1 set second translation vector + Ustaw drugi wektor przekształcenia %1 @@ -7974,7 +7999,7 @@ Przyciągają się również do środka linii i łuków. %1 pick edge to trim Sketcher Trimming: hint - %1 pick edge to trim + Wybierz krawędź do przycięcia %1 @@ -7982,7 +8007,7 @@ Przyciągają się również do środka linii i łuków. Advanced Solver Controls - Advanced Solver Controls + Zaawansowana kontrola solver'a diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index c8f2baa88b..9e0d5d7bd4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Renomear restrição do esboço - + Drag Point Arrastar Ponto - + Drag Curve Arrastar Curva - + Drag geometries Arraste geometrias - + Drag Constraint Restrição de arrasto - + Modify sketch constraints Modificar restrições do esboço @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Adicionar esboço de arco - + Rotate geometries Girar geometrias - + Scale geometries Geometrias de escala - + Translate geometries Traduzir geometrias @@ -3104,49 +3104,50 @@ Essa configuração é apenas para a barra de ferramentas. Qualquer que seja a s Tela - + Font size Tamanho da fonte - + + px px - + View scale ratio Proporção de escala de vista - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. As unidades de comprimento base não serão exibidas em restrições ou nas coordenadas do cursor. Suporta todos os sistemas de unidades, exceto 'US customary' e 'Building US/Euro'. - + Segments per geometry Segmentos por geometria - + Ask for value after creating a dimensional constraint Pedir o valor depois de criar uma restrição de dimensão - + Geometry creation "Continue Mode" Modo continuo de criação da geometria - + Constraint creation "Continue Mode" Modo continuo de criação de restrições - + Hide base length units for supported unit systems Ocultar unidades de comprimento base para sistemas de unidades suportados @@ -3156,119 +3157,134 @@ Suporta todos os sistemas de unidades, exceto 'US customary' e 'Building US/Euro Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Mostrar o nome da restrição dimensional com formato - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ O padrão é: %N = %V %V - valor da dimensão - + Use system decimals setting for cursor coordinates Usar a configuração de casas decimais do sistema para coordenadas do cursor - + Hide all objects that depend on the sketch Esconder todos os objetos que dependem o esboço - + Show objects used for external geometry Mostrar objetos usados para geometria externa - + Show objects that the sketch is attached to Mostrar objetos aos quais o esboço está anexado - + Restore camera position after editing Restaurar a posição da câmara após a edição - + Force orthographic camera when entering edit Forçar câmera ortográfica ao entrar no modo de edição - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Nota: estas configurações são padrões aplicados aos novos esboços. Estas configurações são lembradas para cada esboço individualmente, e guardadas como propriedades de vista. - + Unexpected C++ exception Exceção inesperada de C++ - + Sketcher Esboço @@ -3888,112 +3904,112 @@ Isso é feito analisando as geometrias e restrições do esboço. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + The following constraint is partially redundant: A restrição seguinte é parcialmente redundante: - + The following constraints are partially redundant: As restrições seguintes são parcialmente redundantes: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Esboço vazio - + Over-constrained: Sobre-restrito: - + Malformed constraints: Restrições malformadas: - + Redundant constraints: Restrições redundantes: - + Partially redundant: Parcialmente redundante: - + Solver failed to converge O solucionador falhou na conversão - + Under-constrained: Subrestrito: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Isso é feito analisando as geometrias e restrições do esboço. - + Fully constrained Totalmente restrito @@ -4482,7 +4498,7 @@ o algorítimo Eigen Sparse QR é otimizado para matrizes escassas; geralmente é ViewProviderSketch - + and %1 more e %1 mais @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Erro @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Execução da ferramenta abortada @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Falha ao adicionar elipse - + Failed to rotate Falha ao girar - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Falha ao dimensionar - + Failed to translate Falha ao traduzir @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Excluir geometrias originais (U) - + Apply equal constraints Aplicar restrições iguais - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Se esta opção estiver selecionada, as restrições dimensionais são excluídas da operação. @@ -5484,7 +5505,7 @@ Em vez disso, restrições de igualdade são aplicadas entre os objetos originai TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5505,7 +5526,7 @@ Em vez disso, restrições de igualdade são aplicadas entre os objetos originai TaskSketcherTool_c1_scale - + Keep original geometries (U) Manter geometrias originais (U) @@ -5526,7 +5547,7 @@ Em vez disso, restrições de igualdade são aplicadas entre os objetos originai TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Cópias (+'U'/-'J') @@ -5534,7 +5555,7 @@ Em vez disso, restrições de igualdade são aplicadas entre os objetos originai TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Linhas (+'R'/-'F') @@ -5677,12 +5698,12 @@ Em vez disso, restrições de igualdade são aplicadas entre os objetos originai TaskSketcherTool_c1_translate - + Apply equal constraints Aplicar restrições iguais - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Se esta opção estiver selecionada, as restrições dimensionais são excluídas da operação. @@ -7834,25 +7855,25 @@ Os pontos devem ser definidos a uma distância menor que um quinto do espaçamen SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Parâmetros de rotação @@ -7860,17 +7881,17 @@ Os pontos devem ser definidos a uma distância menor que um quinto do espaçamen SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parâmetros de escala @@ -7919,24 +7940,24 @@ Os pontos devem ser definidos a uma distância menor que um quinto do espaçamen SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parâmetros de translação - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index f847b42f66..3df336208e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Redenumește constrângerea schiței - + Drag Point Trage punctul - + Drag Curve Trage Curba - + Drag geometries Drag geometries - + Drag Constraint Constrângere Drag - + Modify sketch constraints Modifică constrângerile schiței @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Adaugă slot arc de schiță - + Rotate geometries Rotire geometrie - + Scale geometries Scalare geometrie - + Translate geometries Tradu geometrii @@ -3101,49 +3101,50 @@ Această setare este doar pentru bara de instrumente. Indiferent ce alegi, toate Afișare - + Font size Dimensiunea fontului - + + px px - + View scale ratio Vezi raportul scalei - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Unitățile de lungime de bază nu vor fi afișate în constrângeri sau coordonatele cursorului. Suportă toate sistemele de unități cu excepția 'obiceiul SUA' și 'Construirea SUA/EUR'. - + Segments per geometry Segmente pentru fiecare geometrie - + Ask for value after creating a dimensional constraint Cereți valoarea după crearea unei constrângeri de dimensiune - + Geometry creation "Continue Mode" Crearea geometriei "Modul continuu" - + Constraint creation "Continue Mode" Crearea de constrângeri "Modul continuu" - + Hide base length units for supported unit systems Acunde untățile de măsură de bază suportate de către sistemul de unități de măsură @@ -3153,119 +3154,134 @@ Suportă toate sistemele de unități cu excepția 'obiceiul SUA' și 'Construir Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Arată numele constrângerii dimensionale cu format - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3278,47 +3294,47 @@ Implicit la: %N = %V %V - valoare dimensiune - + Use system decimals setting for cursor coordinates Folosește setarea de zecimale pentru coordonatele cursorului - + Hide all objects that depend on the sketch Ascunde toate obiectele care depind de schiță - + Show objects used for external geometry Arată obiectele folosite pentru geometria externă - + Show objects that the sketch is attached to Arată obiectele la care schița este atașată - + Restore camera position after editing Restabili poziţia camerei după editare - + Force orthographic camera when entering edit Forțează camera ortogonală la introducerea editării - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Notă: aceste setări implicite sunt aplicate schițelor noi. Comportamentul este amintit individual pentru fiecare schiță ca proprietăți în fila Vizualizare. - + Unexpected C++ exception Excepție neașteptată de C++ - + Sketcher Schiță @@ -3885,112 +3901,112 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - + The sketch is invalid and cannot be edited. Schița nu este validă și nu poate fi editată. - + The following constraint is partially redundant: Următoarea constrângere este parțial redundantă: - + The following constraints are partially redundant: Următoarele constrângeri sunt parțial redundante: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Schita goala - + Over-constrained: Supraconstrânse: - + Malformed constraints: Constrângeri incorecte: - + Redundant constraints: Constrângeri redundante: - + Partially redundant: Parţial redundant: - + Solver failed to converge Rezolvitorul nu a putut converge - + Under-constrained: Under-constrained: - + %n Degrees of Freedom %n Degrees of Freedom @@ -3999,7 +4015,7 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi - + Fully constrained Complet constrâns @@ -4480,7 +4496,7 @@ Algoritmul QR Eigen Sparse este optimizat pentru matrici dispersați; de obicei ViewProviderSketch - + and %1 more și încă %1 @@ -4724,12 +4740,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Eroare @@ -4863,11 +4879,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Executarea uneltei anulată @@ -4944,17 +4960,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Adăugarea elipsei a eșuat - + Failed to rotate Rotirea a esuat - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Scalarea a eșuat - + Failed to translate Traducerea a eșuat @@ -5112,12 +5133,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Ştergeţi geometriile originale (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5482,7 +5503,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copii (+'U'/ -'J') @@ -5503,7 +5524,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Păstraţi geometriile originale (U) @@ -5524,7 +5545,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copii (+'U'/-'J') @@ -5532,7 +5553,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rânduri (+'R'/-'F') @@ -5675,12 +5696,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7832,25 +7853,25 @@ Punctele trebuie să fie mai apropiate de o cincime din spațierea grilei de o l SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Parametri de rotaţie @@ -7858,17 +7879,17 @@ Punctele trebuie să fie mai apropiate de o cincime din spațierea grilei de o l SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parametrii de scară @@ -7917,24 +7938,24 @@ Punctele trebuie să fie mai apropiate de o cincime din spațierea grilei de o l SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Tradu parametrii - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index 183bc362bd..0285a51a1b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Переименовать ограничение эскиза - + Drag Point Перетащить точку - + Drag Curve Перетащить кривую - + Drag geometries Перетащить геометрию - + Drag Constraint Перетащить ограничение - + Modify sketch constraints Изменить ограничения эскиза @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Добавить паз по дуге на эскиз - + Rotate geometries Поворот геометрии - + Scale geometries Масштабирование геометрии - + Translate geometries Перевести геометрии @@ -3102,49 +3102,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Отображение - + Font size Размер шрифта - + + px пикс. - + View scale ratio Масштабный коэффициент Вида - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Единицы базовой длины не будут отображаться в зависимостях или координатах курсора. Поддерживает все системы единиц измерения, кроме «обычной для США» и «строительной системы США/Евро». - + Segments per geometry Сегментов на геометрию - + Ask for value after creating a dimensional constraint Спрашивать значение при создании размерного ограничения - + Geometry creation "Continue Mode" Создание геометрии "Режим продолжения" - + Constraint creation "Continue Mode" Создание ограничения "Режим Продолжения" - + Hide base length units for supported unit systems Скрыть базовые единицы длины для поддерживаемых систем единиц измерения @@ -3154,119 +3155,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Показать размерное ограничение с форматом - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3279,47 +3295,47 @@ Defaults to: %N = %V %V - значение размера - + Use system decimals setting for cursor coordinates Использовать системные настройки десятичных дробей для координат курсора - + Hide all objects that depend on the sketch Скрыть все объекты, которые зависят от эскиза - + Show objects used for external geometry Показать объекты, используемые для внешней геометрии - + Show objects that the sketch is attached to Показать объекты, к которым присоединён эскиз - + Restore camera position after editing Восстановить позицию камеры после редактирования - + Force orthographic camera when entering edit Переключить в ортогональный вид в режиме правки - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Примечание: эти параметры применяются по умолчанию к новым эскизам. Поведение каждого эскиза запоминается отдельно, как свойство на вкладке Вид. - + Unexpected C++ exception Неожиданное исключение C++ - + Sketcher Скетчер @@ -3886,112 +3902,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Диалог уже открыт в панели задач - + The sketch is invalid and cannot be edited. Эскиз содержит ошибки и не может быть изменен. - + The following constraint is partially redundant: Следующее ограничение частично избыточно: - + The following constraints are partially redundant: Следующие ограничения частично избыточны: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Эскиз не содержащий элементов - + Over-constrained: Конфликтующие ограничения: - + Malformed constraints: Неверные ограничения: - + Redundant constraints: Избыточные ограничения: - + Partially redundant: Частично избыточны: - + Solver failed to converge Решатель не смог сместиться - + Under-constrained: Недостаточно ограничен: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Полностью ограничен @@ -4482,7 +4498,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more и еще %1 @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Ошибка @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Применение инструмента прервано @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Не удалось добавить эллипс - + Failed to rotate Не удалось повернуть - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Не удалось масштабировать - + Failed to translate Не удалось перевести @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Удалить исходную геометрию (U) - + Apply equal constraints Применить ограничения равности - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Если выбран этот параметр, размерные ограничения исключаются из операции. Вместо этого между исходными объектами и их копиями применяются равные ограничения. @@ -5483,7 +5504,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Копии (+U'/ -'J') @@ -5504,7 +5525,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Сохранить исходную геометрию (U) @@ -5525,7 +5546,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Копии (+U'/ -'J') @@ -5533,7 +5554,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Строки (+'R'/-'F') @@ -5676,12 +5697,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Применить ограничения равности - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Если выбран этот параметр, размерные ограничения исключаются из операции. Вместо этого между исходными объектами и их копиями применяются равные ограничения. @@ -7832,25 +7853,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Параметры поворота @@ -7858,17 +7879,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Параметры масштабирования @@ -7917,24 +7938,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Параметры перемещения/массива - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index ef20c15ba4..cc25e14f77 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Preimenuj očrtno omejilo - + Drag Point Vleci točko - + Drag Curve Vleci krivuljo - + Drag geometries Drag geometries - + Drag Constraint Vleci omejilo - + Modify sketch constraints Spremeni očrtno omejilo @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Add sketch arc slot - + Rotate geometries Rotate geometries - + Scale geometries Scale geometries - + Translate geometries Translate geometries @@ -3105,49 +3105,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Prikaz - + Font size Velikost pisave - + + px sl. točk - + View scale ratio Razmerje merila pogleda - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Enote osnovne dolžine v omejilih ali pri sorednicah kazalke ne bodo prikazane. Podprti so vsi merski sistemi razen "Ameriškega merskega sistema" in "Gradbeniškega ZDA/Evro". - + Segments per geometry Odseki na geometrijo - + Ask for value after creating a dimensional constraint Ko je ustvarjeno mersko omejilo, vprašaj za vrednost - + Geometry creation "Continue Mode" "Nadaljevalni način" ustvarjanja geometrije - + Constraint creation "Continue Mode" "Nadaljevalni način" ustvarjanja omejil - + Hide base length units for supported unit systems Skrij enote osnovne dolžine za podprte merske sisteme @@ -3157,119 +3158,134 @@ Podprti so vsi merski sistemi razen "Ameriškega merskega sistema" in "Gradbeni Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Skupaj z obliko zapisa prikaži ime merskega omejila - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3282,47 +3298,47 @@ Privzeto: %N = %V %V - vrednost velikosti - + Use system decimals setting for cursor coordinates Za sorednice kazalke uporabi sistemske nastavitve decimalke - + Hide all objects that depend on the sketch Skrij vse predmet ki so odvisni od očrta - + Show objects used for external geometry Prikaži predmete, uporabljene za zunanjo geometrijo - + Show objects that the sketch is attached to Prikaži predmete, na katere je očrt vezan - + Restore camera position after editing Po urejanju povrni položaj kamere - + Force orthographic camera when entering edit Pri prehodu v urejanje preklopi na pravokotni pogled - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Opomba: te nastavitve so privzeto uporabljene pri novih očrtih. Ravnanje se hrani za vsak očrt posebej kot lastnosti v zavihku Pogled. - + Unexpected C++ exception Nepričakovana izjema C++ - + Sketcher Očrtovalnik @@ -3889,112 +3905,112 @@ Izvede se s pregledom geometrij in omejil očrta. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. Očrt je neveljaven in ga ni mogoče urejati. - + The following constraint is partially redundant: Naslednje omejilo je deloma čezmerno: - + The following constraints are partially redundant: Naslednja omejila so deloma čezmerna: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Prazen očrt - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Čezmerna omejila: - + Partially redundant: Delno čezmerno: - + Solver failed to converge Reševalniku je zbliževanje spodletelo - + Under-constrained: Under-constrained: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4004,7 +4020,7 @@ Izvede se s pregledom geometrij in omejil očrta. - + Fully constrained Polnoomejen @@ -4486,7 +4502,7 @@ Eigen Sparse QR algoritem je optimiziran za redke razpredelnice; običajno hitre ViewProviderSketch - + and %1 more in še %1 @@ -4730,12 +4746,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Napaka @@ -4869,11 +4885,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4950,17 +4966,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Failed to add ellipse - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Failed to translate @@ -5118,12 +5139,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Delete original geometries (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5488,7 +5509,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5509,7 +5530,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Keep original geometries (U) @@ -5530,7 +5551,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copies (+'U'/-'J') @@ -5538,7 +5559,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rows (+'R'/-'F') @@ -5681,12 +5702,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7838,25 +7859,25 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotate parameters @@ -7864,17 +7885,17 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Scale parameters @@ -7923,24 +7944,24 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Translate parameters - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts index a290d26679..2e60b7eaa2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Preimenuj ograničenja skice - + Drag Point Prevuci tačku - + Drag Curve Prevuci krivu - + Drag geometries Prevlači geometriju - + Drag Constraint Prevuci ograničenje - + Modify sketch constraints Izmeni ograničenja skice @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Dodaj skicu lučnog žljeba - + Rotate geometries Okreći geometriju - + Scale geometries Skaliraj geometriju - + Translate geometries Transliraj geometriju @@ -3104,49 +3104,50 @@ Ovo podešavanje je samo za traku sa alatkama. Šta god bude izabrano, svi alati Prikaz - + Font size Veličina fonta - + + px px - + View scale ratio Razmera prikaza 3D pogleda - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Jedinice dužine neće biti prikazane na kotama ili pored koordinata kursora. Podržava sve sisteme jedinica osim 'US sistem jedinica' i 'Građevinski Euro US/Euro'. - + Segments per geometry Segmenti po geometriji - + Ask for value after creating a dimensional constraint Traži unos vrednosti nakon pravljenja dimenzionalnog ograničenja - + Geometry creation "Continue Mode" Pravljenje geometrije „Režim nastavljanja“ - + Constraint creation "Continue Mode" Stvaranje ograničenja „Režim nastavljanja“ - + Hide base length units for supported unit systems Sakrij osnovne jedinice dužine za podržane sisteme mernih jedinica @@ -3156,119 +3157,134 @@ Podržava sve sisteme jedinica osim 'US sistem jedinica' i 'Građevinski Euro US Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Prikaži naziv dimenzionalnog ograničenja u formatu - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Podrazumevano: %N = %V %V - brojčana vrednost - + Use system decimals setting for cursor coordinates Koristi "Opšti broj decimala" za koordinate kursora - + Hide all objects that depend on the sketch Sakrij sve objekte koji zavise od skice - + Show objects used for external geometry Prikaži objekte koji se koriste za spoljnu geometriju - + Show objects that the sketch is attached to Prikaži objekte za koje je skica vezana - + Restore camera position after editing Vrati položaj kamere nakon uređivanja - + Force orthographic camera when entering edit Forsiraj ortogonalnu kameru kada ulaziš u uređivanje - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Napomena: ova podešavanja su podrazumevana za nove skice. Podešavanja se pamte za svaku skicu pojedinačno kao osobine na kartici Prikaz. - + Unexpected C++ exception Neočekivani C++ izuzetak - + Sketcher Skice @@ -3888,112 +3904,112 @@ Ovo se radi analizom geometrije i ograničenja skice. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + The sketch is invalid and cannot be edited. Skica sadrži greške i ne može biti menjana. - + The following constraint is partially redundant: Sledeće ograničenje je suvišno: - + The following constraints are partially redundant: Sledeća ograničenja su suvišna: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Prazna skica - + Over-constrained: Previše ograničena: - + Malformed constraints: Oštećena ograničenja: - + Redundant constraints: Suviše ograničena skica: - + Partially redundant: Delimično suviše ograničena skica: - + Solver failed to converge Solver nije uspeo da se približi - + Under-constrained: Nedovoljno ograničena skica: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4002,7 +4018,7 @@ Ovo se radi analizom geometrije i ograničenja skice. - + Fully constrained Potpuno ograničena skica @@ -4484,7 +4500,7 @@ Eigen redak QR algoritam je optimizovan za retke matrice; obično brže ViewProviderSketch - + and %1 more i %1 više @@ -4728,12 +4744,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Greška @@ -4867,11 +4883,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Izvršavanje alatke je prekinuto @@ -4948,17 +4964,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Dodavanje elipse nije uspelo - + Failed to rotate Okretanje nije uspelo - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Skaliranje nije uspelo - + Failed to translate Translacija nije uspela @@ -5116,12 +5137,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Obriši originalnu geometriju (U) - + Apply equal constraints Primeni ograničenja jednakosti - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ako je izabrana ova opcija, kote se isključuju iz operacije. @@ -5486,7 +5507,7 @@ Umesto toga, između originalnih objekata i njihovih kopija se primenjuju ograni TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Kopije (+'U'/-'J') @@ -5507,7 +5528,7 @@ Umesto toga, između originalnih objekata i njihovih kopija se primenjuju ograni TaskSketcherTool_c1_scale - + Keep original geometries (U) Zadrži originalnu geometriju (U) @@ -5528,7 +5549,7 @@ Umesto toga, između originalnih objekata i njihovih kopija se primenjuju ograni TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Kopije (+'U'/-'J') @@ -5536,7 +5557,7 @@ Umesto toga, između originalnih objekata i njihovih kopija se primenjuju ograni TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Redova (+'R'/-'F') @@ -5679,12 +5700,12 @@ Umesto toga, između originalnih objekata i njihovih kopija se primenjuju ograni TaskSketcherTool_c1_translate - + Apply equal constraints Primeni ograničenja jednakosti - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ako je izabrana ova opcija, kote se isključuju iz operacije. @@ -7836,25 +7857,25 @@ Tačke se moraju nalaziti na udaljenosti manjoj od 1/5 razmaka linija mreže da SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Parametri okretanja @@ -7862,17 +7883,17 @@ Tačke se moraju nalaziti na udaljenosti manjoj od 1/5 razmaka linija mreže da SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Parametri skaliranja @@ -7921,24 +7942,24 @@ Tačke se moraju nalaziti na udaljenosti manjoj od 1/5 razmaka linija mreže da SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Parametri transliranja - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts index 18d29ca2ef..b0ef1b4fb8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Преименуј ограничење скице - + Drag Point Превуци тачку - + Drag Curve Превуци криву - + Drag geometries Превлачи геометрију - + Drag Constraint Превуци ограничење - + Modify sketch constraints Измени ограничења скице @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Додај скицу лучног жљеба - + Rotate geometries Окрећи геометрију - + Scale geometries Скалирај геометрију - + Translate geometries Транслирај геометрију @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Приказ - + Font size Величина фонта - + + px px - + View scale ratio Размера приказа 3Д погледа - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Јединице дужине неће бити приказане на котама или поред координата курсора. Подржава све системе јединица осим 'US систем јединица' и 'Грађевински Euro US/Euro'. - + Segments per geometry Сегменти по геометрији - + Ask for value after creating a dimensional constraint Тражи унос вредности након прављења димензионалног ограничења - + Geometry creation "Continue Mode" Прављење геометрије „Режим настављања“ - + Constraint creation "Continue Mode" Стварање ограничења „Режим настављања“ - + Hide base length units for supported unit systems Сакриј основне јединице дужине за подржане системе мерних јединица @@ -3156,119 +3157,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Прикажи назив димензионалног ограничења у формату - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Defaults to: %N = %V %V - бројчана вредност - + Use system decimals setting for cursor coordinates Користи "Општи број децимала" за координате курсора - + Hide all objects that depend on the sketch Сакриј све објекте који зависе од скице - + Show objects used for external geometry Прикажи објекте који се користе за спољну геометрију - + Show objects that the sketch is attached to Прикажи објекте за које је скица везана - + Restore camera position after editing Врати положај камере након уређивања - + Force orthographic camera when entering edit Форсирај ортогоналну камеру када улазиш у уређивање - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Напомена: ова подешавања су подразумевана за нове скице. Подешавања се памте за сваку скицу појединачно као особине на картици Приказ. - + Unexpected C++ exception Неочекивани Ц++ изузетак - + Sketcher Скице @@ -3888,112 +3904,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака - + The sketch is invalid and cannot be edited. Скица садржи грешке и не може бити мењана. - + The following constraint is partially redundant: Следеће ограничење је сувишно: - + The following constraints are partially redundant: Следећа ограничења су сувишна: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Празна скица - + Over-constrained: Превише ограничена: - + Malformed constraints: Оштећена ограничења: - + Redundant constraints: Сувише ограничена скица: - + Partially redundant: Делимично сувише ограничена скица: - + Solver failed to converge Солвер није успео да се приближи - + Under-constrained: Недовољно ограничена скица: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4002,7 +4018,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Потпуно ограничена скица @@ -4484,7 +4500,7 @@ Eigen редак QR алгоритам је оптимизован за ретк ViewProviderSketch - + and %1 more и %1 више @@ -4728,12 +4744,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Грешка @@ -4867,11 +4883,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Извршавање алатке је прекинуто @@ -4948,17 +4964,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Додавање елипсе није успело - + Failed to rotate Окретање није успело - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Скалирање није успело - + Failed to translate Транслација није успела @@ -5116,12 +5137,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Обриши оригиналну геометрију (У) - + Apply equal constraints Примени ограничења једнакости - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ако је изабрана ова опција, коте се искључују из операције. @@ -5486,7 +5507,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Копије (+'У'/ -'Ј') @@ -5507,7 +5528,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Задржи оригиналну геометрију (У) @@ -5528,7 +5549,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Копије (+'У'/ -'Ј') @@ -5536,7 +5557,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Редови (+'Р'/-'Ф') @@ -5679,12 +5700,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Примени ограничења једнакости - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Ако је изабрана ова опција, коте се искључују из операције. @@ -7836,25 +7857,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Параметри окретања @@ -7862,17 +7883,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Параметри скалирања @@ -7921,24 +7942,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Параметри транслирања - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index 8bd7decf92..69b4401a03 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Byt namn på skissbegränsning - + Drag Point Dra punkt - + Drag Curve Dra kurva - + Drag geometries Draggeometrier - + Drag Constraint Dragbegränsning - + Modify sketch constraints Ändra skissbegränsningar @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Lägg till skiss bågspår - + Rotate geometries Rotera geometrier - + Scale geometries Geometrier i skala - + Translate geometries Översätt geometrier @@ -3104,49 +3104,50 @@ Denna inställning gäller endast för verktygsfältet. Oavsett vilket du välje Fönster - + Font size Teckenstorlek - + + px px - + View scale ratio Skalförhållande för vy - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Baslängdsenheter visas inte i begränsningar eller markörkoordinater. Stöder alla enhetssystem utom "US customary" och "Building US/Euro". - + Segments per geometry Antal segment per geometri - + Ask for value after creating a dimensional constraint Inmatning av värde efter skapande av dimensionsbegränsning - + Geometry creation "Continue Mode" Geometri skapande "Fortsätt läge" - + Constraint creation "Continue Mode" Skapande av begränsning "Fortsätt läge" - + Hide base length units for supported unit systems Göm baslängdenheter för de enhetssystem som stöds @@ -3156,119 +3157,134 @@ Stöder alla enhetssystem utom "US customary" och "Building US/Euro".Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Visa namn på dimensionsbegränsning med format - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Standardvärde: %N = %V %V - dimensionens värde - + Use system decimals setting for cursor coordinates Använd systemets decimalinställning för markörkoordinater - + Hide all objects that depend on the sketch Dölj alla objekt som är beroende av skissen - + Show objects used for external geometry Visa objekt som används för yttre geometri - + Show objects that the sketch is attached to Visa objekt som skissen är kopplad till - + Restore camera position after editing Återställ kameraposition efter redigering - + Force orthographic camera when entering edit Tvinga fram ortografisk kamera när du går in i redigering - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Obs: dessa inställningar är standardinställningar som tillämpas på nya skisser. Beteendet sparas för varje enskild skiss som egenskaper på fliken View. - + Unexpected C++ exception Oväntat C++-undantag - + Sketcher Skissare @@ -3888,112 +3904,112 @@ Detta görs genom att skissens geometrier och begränsningar analyseras. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - + The sketch is invalid and cannot be edited. Skissen är ogiltig och kan inte redigeras. - + The following constraint is partially redundant: Följande begränsning är delvis överflödig: - + The following constraints are partially redundant: Följande begränsningar är delvis överflödiga: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Tom skiss - + Over-constrained: Överbelastad: - + Malformed constraints: Missbildade begränsningar: - + Redundant constraints: Redundanta begränsningar: - + Partially redundant: Delvis överflödig: - + Solver failed to converge Lösaren lyckades inte konvergera - + Under-constrained: Underbegränsad: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4001,7 +4017,7 @@ Detta görs genom att skissens geometrier och begränsningar analyseras. - + Fully constrained Fullständigt begränsad @@ -4483,7 +4499,7 @@ Eigen Sparse QR-algoritmen är optimerad för glesa matriser; vanligtvis snabbar ViewProviderSketch - + and %1 more och %1 till @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Fel @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Verktygsexekvering avbruten @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Misslyckades med att lägga till ellips - + Failed to rotate Lyckades inte rotera - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Misslyckades med att skala - + Failed to translate Misslyckades med att översätta @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Ta bort originalgeometrier (U) - + Apply equal constraints Tillämpa lika begränsningar - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Om detta alternativ väljs utesluts dimensionella begränsningar från operationen. @@ -5485,7 +5506,7 @@ Istället tillämpas lika stora begränsningar mellan originalobjekten och deras TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Kopior (+'U'/ -'J') @@ -5506,7 +5527,7 @@ Istället tillämpas lika stora begränsningar mellan originalobjekten och deras TaskSketcherTool_c1_scale - + Keep original geometries (U) Behåll originalgeometrierna (U) @@ -5527,7 +5548,7 @@ Istället tillämpas lika stora begränsningar mellan originalobjekten och deras TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Kopior (+'U'/-'J') @@ -5535,7 +5556,7 @@ Istället tillämpas lika stora begränsningar mellan originalobjekten och deras TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rader (+'R'/-'F') @@ -5678,12 +5699,12 @@ Istället tillämpas lika stora begränsningar mellan originalobjekten och deras TaskSketcherTool_c1_translate - + Apply equal constraints Tillämpa lika begränsningar - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Om detta alternativ väljs utesluts dimensionella begränsningar från operationen. @@ -7835,25 +7856,25 @@ Punkter måste ställas in närmare en gridlinje än en femtedel av gridavstånd SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotera parametrar @@ -7861,17 +7882,17 @@ Punkter måste ställas in närmare en gridlinje än en femtedel av gridavstånd SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Skalparametrar @@ -7920,24 +7941,24 @@ Punkter måste ställas in närmare en gridlinje än en femtedel av gridavstånd SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Översätt parametrar - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index b9481c3583..84721d80a5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Eskiz kısıtlamasını yeniden adlandır - + Drag Point Noktayı Sürükle - + Drag Curve Eğriyi Sürükle - + Drag geometries Drag geometries - + Drag Constraint Kısıtlamayı Sürükle - + Modify sketch constraints Eskiz kısıtlamalarını değiştirin @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Add sketch arc slot - + Rotate geometries Rotate geometries - + Scale geometries Scale geometries - + Translate geometries Translate geometries @@ -3103,49 +3103,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Ekran - + Font size Yazı Boyutu - + + px px - + View scale ratio Ölçek oranını görüntüle - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. - + Segments per geometry Geometri başına segmentler - + Ask for value after creating a dimensional constraint Boyutsal bir kısıtlama oluşturduktan sonra değer isteyin - + Geometry creation "Continue Mode" Geometri oluşturma "Devam Kipi" - + Constraint creation "Continue Mode" "Devam Etme" modunu kısıtla - + Hide base length units for supported unit systems Desteklenen birim sistemleri için temel uzunluk birimleri gizle @@ -3155,119 +3156,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'.Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Boyutlu kısıtlama adını düzeniyle göster - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3280,47 +3296,47 @@ Varsayılan: %N = %V %V - boyut değeri - + Use system decimals setting for cursor coordinates Use system decimals setting for cursor coordinates - + Hide all objects that depend on the sketch Eskize bağlı tüm nesneleri gizle - + Show objects used for external geometry Dış geometri için kullanılan nesneleri göster - + Show objects that the sketch is attached to Eskizin eklendiği nesneleri göster - + Restore camera position after editing Düzenledikten sonra kamera konumunu geri yükle - + Force orthographic camera when entering edit Düzenlemeye başlandığında dikey kamerayı zorla - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Not: bu ayarlar, yeni taslaklara uygulanan varsayılanlardır. Bu davranış, Görünüm sekmesinde özellikler olarak her bir taslak için ayrı ayrı hatırlanır. - + Unexpected C++ exception Beklenmedik C ++ özel durumu - + Sketcher Taslakçı @@ -3887,112 +3903,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - + The sketch is invalid and cannot be edited. Eskiz geçersizdir ve düzenlenemez. - + The following constraint is partially redundant: Aşağıdaki kısıtlama kısmen gereksizdir: - + The following constraints are partially redundant: Aşağıdaki kısıtlamalar kısmen gereksizdir: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Boş eskiz - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Gereksiz kısıtlamalar: - + Partially redundant: Kısmen gereksiz: - + Solver failed to converge Solver failed to converge - + Under-constrained: Under-constrained: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4000,7 +4016,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -4482,7 +4498,7 @@ Eigen Sparse QR algoritması seyrek matrisler için optimize edilmiştir; genell ViewProviderSketch - + and %1 more and %1 more @@ -4726,12 +4742,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Hata @@ -4865,11 +4881,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Tool execution aborted @@ -4946,17 +4962,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Failed to add ellipse - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Failed to translate @@ -5114,12 +5135,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Delete original geometries (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5484,7 +5505,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5505,7 +5526,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Keep original geometries (U) @@ -5526,7 +5547,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copies (+'U'/-'J') @@ -5534,7 +5555,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rows (+'R'/-'F') @@ -5677,12 +5698,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7834,25 +7855,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Rotate parameters @@ -7860,17 +7881,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Scale parameters @@ -7919,24 +7940,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Translate parameters - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index 5735fba121..adeae85754 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry Перейменувати обмеження ескізу - + Drag Point Перетягнути точку - + Drag Curve Перетягнути криву - + Drag geometries Перетягнути геометрії - + Drag Constraint Перетягнути обмеження - + Modify sketch constraints Змінити обмеження ескізу @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry Додати дуговий паз - + Rotate geometries Поворот геометрії - + Scale geometries Масштабувати Геометрію - + Translate geometries Переміщення геометрії @@ -3104,49 +3104,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Показ - + Font size Розмір шрифту - + + px пікс. - + View scale ratio Масштаб перегляду - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. Не показувати одиниці вимірювання в обмеженнях або координатах курсору. Підтримує всі системи одиниць, крім "загальноприйнятої в США" та "Будівельної США/Євро". - + Segments per geometry Сегментів на геометрію - + Ask for value after creating a dimensional constraint Запитувати значення при створенні розмірного обмеження - + Geometry creation "Continue Mode" Створення геометрії в "Послідовному режимі" - + Constraint creation "Continue Mode" Створення обмежень в "Послідовному режимі" - + Hide base length units for supported unit systems Приховати базові одиниці довжини для підтримуваних систем вимірювання @@ -3156,119 +3157,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format Показати назву обмеження розмірів з форматом - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3281,47 +3297,47 @@ Defaults to: %N = %V %V - значення розміру - + Use system decimals setting for cursor coordinates Використовувати налаштування системних десяткових знаків для координат курсору - + Hide all objects that depend on the sketch Приховати всі обʼєкти залежні від ескізу - + Show objects used for external geometry Показати обʼєкти для зовнішньої геометрії - + Show objects that the sketch is attached to Показати обʼєкти з приєднаними ескізами - + Restore camera position after editing Відновити позицію камери після редагування - + Force orthographic camera when entering edit Вмикати ортографічний вид камери в режимі редагування - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Примітка: ці параметри застосовуються за замовчуванням до нових ескізів. Поведінка кожного ескізу запамʼятовується окремо, як властивість у вкладці Вид. - + Unexpected C++ exception Несподіване виключення C++ - + Sketcher Редактор Ескізів @@ -3889,112 +3905,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - + The sketch is invalid and cannot be edited. Ескіз містить помилки та не може бути змінений. - + The following constraint is partially redundant: Наступне обмеження частково надлишкове: - + The following constraints are partially redundant: Наступні обмеження частково надлишкові: - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch Порожній ескіз - + Over-constrained: Надлишково обмежено: - + Malformed constraints: Невірні обмеження: - + Redundant constraints: Надлишкові обмеження: - + Partially redundant: Частково надлишкові: - + Solver failed to converge Рішення не сходиться - + Under-constrained: Частково обмежений: - + %n Degrees of Freedom %n Degrees of Freedom @@ -4004,7 +4020,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Повністю обмежений @@ -4486,7 +4502,7 @@ Eigen Dense QR — щільна матриця QR з повним поворот ViewProviderSketch - + and %1 more та %1 більше @@ -4729,12 +4745,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error Помилка @@ -4868,11 +4884,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted Виконання команди перервано @@ -4949,17 +4965,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Не вдалося додати еліпс - + Failed to rotate Помилка розвороту - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Помилка масштабування - + Failed to translate Помилка переміщення @@ -5117,12 +5138,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.Видалити оригінальні геометрії (U) - + Apply equal constraints Застосувати однакові обмеження - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Якщо цей параметр вибрано, то обмеження на розміри виключаються з операції. @@ -5487,7 +5508,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Копії (+'U'/ -'J') @@ -5508,7 +5529,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Зберегти оригінальні геометрії (U) @@ -5529,7 +5550,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Копії (+'U'/-'J') @@ -5537,7 +5558,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Рядки (+'R'/-'F') @@ -5680,12 +5701,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Застосувати однакові обмеження - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. Якщо цей параметр вибрано, то обмеження на розміри виключаються з операції. @@ -7837,25 +7858,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters Параметри розвороту @@ -7863,17 +7884,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters Параметри масштабування @@ -7922,24 +7943,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters Параметри переміщення - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 6fdbc836ec..83c2d60942 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry 重命名草图约束 - + Drag Point 拖动点 - + Drag Curve 拖动曲线 - + Drag geometries Drag geometries - + Drag Constraint 拖动约束 - + Modify sketch constraints 修改草图约束 @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry 添加草图弧槽位 - + Rotate geometries 旋转图元 - + Scale geometries 缩放图元 - + Translate geometries 平行移动图元 @@ -3108,49 +3108,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 显示 - + Font size 字体大小 - + + px px - + View scale ratio 视图缩放比 - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. 基本长度单位不会显示在约束或光标坐标中。 支持除“美标”和“建筑 美标/欧标”之外的所有单位系统。 - + Segments per geometry 每个几何图形的线段数 - + Ask for value after creating a dimensional constraint 创建尺寸约束后询问值 - + Geometry creation "Continue Mode" Geometry creation "Continue Mode" - + Constraint creation "Continue Mode" 约束创建 "继续模式" - + Hide base length units for supported unit systems 隐藏支持的单元系统的基本长度单位 @@ -3160,119 +3161,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format 尺寸约束名称格式 - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3285,47 +3301,47 @@ Defaults to: %N = %V %V - 标注值 - + Use system decimals setting for cursor coordinates 光标坐标使用系统小数设置 - + Hide all objects that depend on the sketch 隐藏所有依赖于此草绘的对象 - + Show objects used for external geometry 显示被用于外部几何的对象 - + Show objects that the sketch is attached to 显示草图附加到的对象 - + Restore camera position after editing 在编辑后恢复相机位置 - + Force orthographic camera when entering edit 进入编辑时强制使用正交视角。 - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - + Unexpected C++ exception 未知C++异常 - + Sketcher 草图设计 @@ -3892,119 +3908,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel 一个对话框已在任务面板打开 - + The sketch is invalid and cannot be edited. 该草图不可用并不可编辑。 - + The following constraint is partially redundant: 以下约束有一部分是多余的： - + The following constraints are partially redundant: 以下约束有一部分是冗余的： - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch 空草图 - + Over-constrained: 过度约束： - + Malformed constraints: 错误约束： - + Redundant constraints: 冗余约束： - + Partially redundant: 部分冗余： - + Solver failed to converge 求解器未能收敛 - + Under-constrained: 约束不足： - + %n Degrees of Freedom %n Degrees of Freedom - + Fully constrained 完全约束 @@ -4486,7 +4502,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -4730,12 +4746,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error 错误 @@ -4869,11 +4885,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted 工具执行中止 @@ -4950,17 +4966,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.添加椭圆失败 - + Failed to rotate Failed to rotate - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale Failed to scale - + Failed to translate Failed to translate @@ -5118,12 +5139,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.删除原始几何图形 (U) - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -5488,7 +5509,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') Copies (+'U'/ -'J') @@ -5509,7 +5530,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) Keep original geometries (U) @@ -5530,7 +5551,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') Copies (+'U'/-'J') @@ -5538,7 +5559,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') Rows (+'R'/-'F') @@ -5681,12 +5702,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints Apply equal constraints - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. If this option is selected dimensional constraints are excluded from the operation. @@ -7838,25 +7859,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters 旋转参数 @@ -7864,17 +7885,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters 缩放参数 @@ -7923,24 +7944,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters 平移参数 - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 16fcaeb7f8..f801bb7cde 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -853,27 +853,27 @@ invalid constraints, and degenerate geometry 重新命名草圖拘束 - + Drag Point 拖曳點 - + Drag Curve 拖曳曲線 - + Drag geometries Drag geometries - + Drag Constraint 拖動拘束 - + Modify sketch constraints 修改草圖拘束 @@ -898,17 +898,17 @@ invalid constraints, and degenerate geometry 添加草圖弧線槽 - + Rotate geometries 旋轉幾何 - + Scale geometries 縮放幾何 - + Translate geometries 轉換幾何體 @@ -3108,49 +3108,50 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 顯示 - + Font size 字體大小 - + + px px - + View scale ratio 檢視縮放比例 - + Base length units will not be displayed in constraints or cursor coordinates. Supports all unit systems except 'US customary' and 'Building US/Euro'. 基本長度單位將不會顯示在拘束或遊標座標中。 支援所有單位系統除了 '美制 (US customary)' 與 '建築物 美制/歐制' 外。 - + Segments per geometry 每個幾何圖形的段 - + Ask for value after creating a dimensional constraint 建立一標註尺寸拘束後將要求輸入一數值 - + Geometry creation "Continue Mode" 以「連續模式」建立幾何 - + Constraint creation "Continue Mode" 以「連續模式」建立拘束 - + Hide base length units for supported unit systems 有支援的單位制度中，基本長度單位不顯示。 @@ -3160,119 +3161,134 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Sketch Editing - + + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + Enable a custom pixel size for constraint symbols (otherwise the font size is used). + + + + Use custom constraint symbol size + Use custom constraint symbol size + + + + Pixel size used to render constraint symbols + Pixel size used to render constraint symbols + + + Scales the 3D view based on this factor Scales the 3D view based on this factor - + The number of polygons used for geometry approximation The number of polygons used for geometry approximation - + Displays names of dimensional constraints, if they exist Displays names of dimensional constraints, if they exist - + Show dimensional constraint name with format 以格式顯示標註尺寸拘束名稱 - + %N = %V %N = %V - + Keeps the current Sketcher tool active after creating geometry Keeps the current Sketcher tool active after creating geometry - + Font size used for labels and constraints Font size used for labels and constraints - + Keeps the current Sketcher constraint tool active after creating geometry Keeps the current Sketcher constraint tool active after creating geometry - + Displays cursor position coordinates next to the cursor while editing a sketch Displays cursor position coordinates next to the cursor while editing a sketch - + Displays coordinates next to the cursor while editing Displays coordinates next to the cursor while editing - + Opens a dialog to input a value for new dimensional constraints after creation Opens a dialog to input a value for new dimensional constraints after creation - + Cursor coordinates will use the system decimals setting instead of the short form Cursor coordinates will use the system decimals setting instead of the short form - + Visibility Automation Visibility Automation - + Hides all object features that depend on the opened sketch Hides all object features that depend on the opened sketch - + Shows source objects which are used for external geometry in the opened sketch Shows source objects which are used for external geometry in the opened sketch - + Shows objects the opened sketch is attached to Shows objects the opened sketch is attached to - + Restores the camera position after closing the sketch Restores the camera position after closing the sketch - + Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. Forces the camera to an orthographic view when editing a sketch. Works only when "Restore camera position after editing" is enabled. - + Opens a sketch in section view mode, showing only objects behind the sketch plane Opens a sketch in section view mode, showing only objects behind the sketch plane - + Open sketch in section view mode Open sketch in section view mode - + Applies current visibility automation settings to all sketches in the open documents Applies current visibility automation settings to all sketches in the open documents - + Apply to Existing Sketches Apply to Existing Sketches - + The format of the dimensional constraint string presentation. Defaults to: %N = %V @@ -3285,47 +3301,47 @@ Defaults to: %N = %V %V - 標註值 - + Use system decimals setting for cursor coordinates 使用系統小數設置在遊標座標上 - + Hide all objects that depend on the sketch 隱藏所有依存於草圖的物件 - + Show objects used for external geometry 顯示被用於外部幾何之物件 - + Show objects that the sketch is attached to 顯示草圖附加到的物件 - + Restore camera position after editing 編輯後恢復相機視角位置 - + Force orthographic camera when entering edit 當進入編輯時強迫相機正交視角 - + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. 注意：這些設置是預設應用在新的草圖。每個草圖的行為被單獨記住，作為“視圖”選項卡上的屬性。 - + Unexpected C++ exception 未知C++異常 - + Sketcher 草圖 @@ -3892,119 +3908,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + A dialog is already open in the task panel 於工作面板已開啟對話窗 - + The sketch is invalid and cannot be edited. 此為無效且不能編輯之草圖 - + The following constraint is partially redundant: 以下拘束為部份冗餘： - + The following constraints are partially redundant: 以下拘束為部份冗餘： - + Edit Sketch Edit Sketch - + Close this dialog? Close this dialog? - + Invalid Sketch Invalid Sketch - + Open the sketch validation tool? Open the sketch validation tool? - + Remove the following constraint: Remove the following constraint: - + Remove at least one of the following constraints: Remove at least one of the following constraints: - + Remove the following redundant constraint: Remove the following redundant constraint: - + Remove the following redundant constraints: Remove the following redundant constraints: - + Remove the following malformed constraint: Remove the following malformed constraint: - + Remove the following malformed constraints: Remove the following malformed constraints: - + Empty sketch 空白草圖 - + Over-constrained: 過度拘束： - + Malformed constraints: 格式錯誤的拘束： - + Redundant constraints: 冗餘拘束： - + Partially redundant: 部份冗餘： - + Solver failed to converge 求解器無法收斂 - + Under-constrained: 拘束不足： - + %n Degrees of Freedom %n Degrees of Freedom - + Fully constrained 完全拘束 @@ -4483,7 +4499,7 @@ Eigen Sparse QR 算法針對稀疏矩陣進行了優化；通常更快 ViewProviderSketch - + and %1 more 還有 %1 個 @@ -4727,12 +4743,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Error 錯誤 @@ -4866,11 +4882,11 @@ The grid spacing changes if it becomes smaller than the specified pixel size. - - + + - + Tool execution aborted 工具執行中斷 @@ -4947,17 +4963,22 @@ The grid spacing changes if it becomes smaller than the specified pixel size.添加橢圓失敗 - + Failed to rotate 旋轉失敗 - + + Invalid scale factor. Scale factor must be a positive number. + Invalid scale factor. Scale factor must be a positive number. + + + Failed to scale 縮放失敗 - + Failed to translate 轉移失敗 @@ -5115,12 +5136,12 @@ The grid spacing changes if it becomes smaller than the specified pixel size.刪除原始幾何體 (U) - + Apply equal constraints 套用相同拘束 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. 如果選擇了此選項，則標註尺寸拘束將被排除在操作之外。反之將在原始物件及其複製品之間應用相等拘束。 @@ -5484,7 +5505,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p4_rotate - + Copies (+'U'/ -'J') 複製（+'U'/-'J'） @@ -5505,7 +5526,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_scale - + Keep original geometries (U) 保留原始幾何體 (U) @@ -5526,7 +5547,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p3_translate - + Copies (+'U'/-'J') 複製（+'U'/-'J'） @@ -5534,7 +5555,7 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_p5_translate - + Rows (+'R'/-'F') 列 (+'R'/-'F') @@ -5677,12 +5698,12 @@ Instead equal constraints are applied between the original objects and their cop TaskSketcherTool_c1_translate - + Apply equal constraints 套用相同拘束 - + If this option is selected dimensional constraints are excluded from the operation. Instead equal constraints are applied between the original objects and their copies. 如果選中此選項，將排除標註尺寸拘束。反之將在原始物件及其複製品之間套用相同拘束。 @@ -7833,25 +7854,25 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerRotate - + %1 pick center point Sketcher Rotate: hint %1 pick center point - + %1 set start angle Sketcher Rotate: hint %1 set start angle - + %1 set rotation angle Sketcher Rotate: hint %1 set rotation angle - + Rotate parameters 旋轉參數 @@ -7859,17 +7880,17 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerScale - + %1 pick reference point %1 pick reference point - + %1 set scale factor %1 set scale factor - + Scale parameters 縮放參數 @@ -7918,24 +7939,24 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna SketcherGui::DrawSketchHandlerTranslate - + Translate parameters 轉換參數 - + %1 pick reference point Sketcher Translate: hint %1 pick reference point - + %1 set translation vector Sketcher Translate: hint %1 set translation vector - + %1 set second translation vector Sketcher Translate: hint %1 set second translation vector diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts index f6ce97693e..1d578b47d7 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts @@ -11,12 +11,12 @@ &New Spreadsheet - &New Spreadsheet + &Full de càlcul nou Creates a new spreadsheet - Creates a new spreadsheet + Crea un full de càlcul nou @@ -29,12 +29,12 @@ Align &Bottom - Align &Bottom + Alineació &inferior Aligns cell contents to the bottom - Aligns cell contents to the bottom + Alinea el contingut de la cel·la a la part inferior @@ -47,12 +47,12 @@ Align Horizontal &Center - Align Horizontal &Center + Alineació horitzontal &central Aligns cell contents to the horizontal center - Aligns cell contents to the horizontal center + Alinea el contingut de la cel·la al centre horitzontal @@ -65,12 +65,12 @@ Align &Left - Align &Left + Alineació &esquerra Aligns cell contents to the left - Aligns cell contents to the left + Alinea el contingut de la cel·la a l'esquerra @@ -83,12 +83,12 @@ Align &Right - Align &Right + Alineació &dreta Aligns cell contents to the right - Aligns cell contents to the right + Alinea el contingut de la cel·la a la dreta @@ -101,12 +101,12 @@ Align &Top - Align &Top + Alineació &superior Aligns cell contents to the top - Aligns cell contents to the top + Alinea el contingut de la cel·la a la part superior @@ -119,12 +119,12 @@ Align &Vertical Center - Align &Vertical Center + Alineació vertical &central Aligns cell contents to the vertical center - Aligns cell contents to the vertical center + Alinea el contingut de la cel·la al centre vertical @@ -137,12 +137,12 @@ &Export Spreadsheet - &Export Spreadsheet + &Exportar full de càlcul Exports the spreadsheet to a CSV file - Exports the spreadsheet to a CSV file + Exporta el full de càlcul en un fitxer CSV @@ -155,12 +155,12 @@ &Import Spreadsheet - &Import Spreadsheet + &Importar full de càlcul Imports a CSV file into a new spreadsheet - Imports a CSV file into a new spreadsheet + Importa un fitxer CSV a un full de càlcul nou @@ -173,12 +173,12 @@ &Merge Cells - &Merge Cells + &Fusionar cel·les Merges the selected cells - Merges the selected cells + Fusiona les cel·les seleccionades @@ -191,12 +191,12 @@ Set Alias - Set Alias + Establir àlies Sets an alias for the selected cell - Sets an alias for the selected cell + Estableix un àlies per a les cel·les seleccionades @@ -209,12 +209,12 @@ Sp&lit Cell - Sp&lit Cell + &Divideix la cel·la Splits a previously merged cell - Splits a previously merged cell + Divideix una cel·la anteriorment fusionada @@ -227,12 +227,12 @@ &Bold Text - &Bold Text + &Text en negreta Sets the text in the selected cells bold - Sets the text in the selected cells bold + Estableix en negreta el text de les cel·les seleccionades @@ -245,12 +245,12 @@ &Italic Text - &Italic Text + &Text en cursiva Sets the text in the selected cells italic - Sets the text in the selected cells italic + Estableix en cursiva el text de les cel·les seleccionades @@ -263,12 +263,12 @@ &Underline Text - &Underline Text + &Text subratllat Underlines the text in the selected cells - Underlines the text in the selected cells + Subratlla el text de les cel·les seleccionades @@ -365,25 +365,25 @@ Insert Rows - Insert Rows + Insereix files Remove Rows - Remove Rows + Eliminar files Insert Columns - Insert Columns + Insereix columnes Clear Cells - Clear Cells + Netejar cel·les @@ -430,16 +430,16 @@ L'expressió s'ha d'avaluar com a cadena d'una adreça de cel·la. To cells - To cells + A les cel·les End cell address to bind to. Type '=' to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' to use an expression. -The expression must evaluate to a string of some cell address. + Adreça de la cel·la final a assignar. +Escrigui '=' per a utilitzar una expressió. +L'expressió s'ha d'avaluar com a cadena d'una adreça de cel·la. @@ -449,7 +449,7 @@ The expression must evaluate to a string of some cell address. Sheet - Sheet + Full @@ -532,7 +532,7 @@ switch the design configuration. The property will be created if not exist. Cell range - Cell range + Rang de cel·les @@ -547,7 +547,7 @@ switch the design configuration. The property will be created if not exist. Optional property group name - Optional property group name + Nom opcional del grup de propietats @@ -570,7 +570,7 @@ switch the design configuration. The property will be created if not exist. Cell Properties - Cell Properties + Propietats de cel·la @@ -707,34 +707,34 @@ Spreadsheet.my_alias_name enlloc de Spreadsheet.B1 Export File - Export File + Exportar fitxer Show Spreadsheet - Show Spreadsheet + Mostrar full de càlcul Sets the text color of cells - Sets the text color of cells + Estableix el color de text de les cel·les Sets the text color of spreadsheet cells - Sets the text color of spreadsheet cells + Estableix el color de text de les cel·les del full de càlcul Sets the background color of cells - Sets the background color of cells + Estableix el color de fons de les cel·les Sets the spreadsheet cells background color - Sets the spreadsheet cells background color + Estableix el color de fons de les cel·les del full de càlcul @@ -853,12 +853,12 @@ Spreadsheet.my_alias_name enlloc de Spreadsheet.B1 &Content - &Content + &Contingut &Alias - &Alias + &Àlies @@ -895,9 +895,9 @@ Spreadsheet.my_alias_name enlloc de Spreadsheet.B1 Source and target cell count mismatch. Partial binding may still work. Continue? - Source and target cell count mismatch. Partial binding may still work. + Discrepància entre el nombre de cel·les d'origen i de destí. La unió parcial encara podria funcionar. -Continue? +Vol continuar? @@ -960,22 +960,22 @@ Per defecte: %V = %A Uses the custom presentation to display cell string - Uses the custom presentation to display cell string + Utilitza la presentació personalitzada per a mostrar la cadena de caràcters de la cel·la Defines a default zoom level for table view from 60% to 160% - Defines a default zoom level for table view from 60% to 160% + Defineix el nivell de zoom predeterminat per a la vista de la taula de 60% a 160% Default zoom level - Default zoom level + Nivell de zoom predeterminat Delimiter character - Delimiter character + Caràcter de delimitació @@ -990,7 +990,7 @@ Per defecte: %V = %A Quote character - Quote character + Caràcter de citació @@ -1000,7 +1000,7 @@ Per defecte: %V = %A Escape character - Escape character + Caràcter d'escapament @@ -1032,96 +1032,96 @@ Per defecte: %V = %A Insert %n Row(s) Above - - Insert %n Row(s) Above - Insert %n Row(s) Above + + Insereix %n fila a sobre + Insereix %n files a sobre Insert %n Row(s) Below - - Insert %n Row(s) Below - Insert %n Row(s) Below + + Insereix %n fila a sota + Insereix %n files a sota Insert %n Non-Contiguous Rows - - Insert %n Non-Contiguous Rows - Insert %n Non-Contiguous Rows + + Insereix %n fila no contingua + Insereix %n files no contingües Remove Rows - - Remove Rows - Remove Rows + + Eliminar fila + Eliminar files Insert %n Column(s) Left - - Insert %n Column(s) Left - Insert %n Column(s) Left + + Insereix %n columna a l'esquerra + Insereix %n columnes a l'esquerra Insert %n Column(s) Right - - Insert %n Column(s) Right - Insert %n Column(s) Right + + Insereix %n columna a la dreta + Insereix %n columnes a la dreta Insert %n Non-Contiguous Columns - - Insert %n Non-Contiguous Columns - Insert %n Non-Contiguous Columns + + Insereix %n columna no contingua + Insereix %n columnes no contingües Remove Column(s) - - Remove Column(s) - Remove Column(s) + + Eliminar columna + Eliminar columnes Properties… - Properties… + Propietats… Bind… - Bind… + Vincula… Configuration Table… - Configuration Table… + Taula de configuració… Merge Cells - Merge Cells + Fusionar cel·les Split Cells - Split Cells + Divideix cel·les @@ -1203,7 +1203,7 @@ Per defecte: %V = %A Zoom Level - Zoom Level + Nivell de zoom diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts index f7337015bc..9d33a56d93 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts @@ -155,12 +155,12 @@ &Import Spreadsheet - &Import Spreadsheet + Tabelle &importieren Imports a CSV file into a new spreadsheet - Imports a CSV file into a new spreadsheet + Importiert eine CSV-Datei in eine neue Tabelle diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts index 537f393ab3..1ebb312b52 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts @@ -11,12 +11,12 @@ &New Spreadsheet - &New Spreadsheet + &Nuovo Foglio di calcolo Creates a new spreadsheet - Creates a new spreadsheet + Crea un nuovo foglio di calcolo @@ -29,12 +29,12 @@ Align &Bottom - Align &Bottom + Allinea in &Basso Aligns cell contents to the bottom - Aligns cell contents to the bottom + Allinea il contenuto delle celle in basso @@ -65,12 +65,12 @@ Align &Left - Align &Left + Allinea a &Sinistra Aligns cell contents to the left - Aligns cell contents to the left + Allinea il contenuto delle celle a sinistra @@ -83,12 +83,12 @@ Align &Right - Align &Right + Allinea a &Destra Aligns cell contents to the right - Aligns cell contents to the right + Allinea il contenuto delle celle a destra @@ -101,12 +101,12 @@ Align &Top - Align &Top + Allinea in &Alto Aligns cell contents to the top - Aligns cell contents to the top + Allinea il contenuto delle celle in alto @@ -449,7 +449,7 @@ The expression must evaluate to a string of some cell address. Sheet - Sheet + Foglio @@ -713,7 +713,7 @@ Spreadsheet.my_alias_name invece di Spreadsheet.B1 Export File - Export File + Esporta File @@ -881,12 +881,12 @@ Spreadsheet.my_alias_name invece di Spreadsheet.B1 - - - + - + - + + + @@ -1006,7 +1006,7 @@ Predefinito a: %V = %A Escape character - Escape character + Carattere di escape @@ -1063,7 +1063,7 @@ Predefinito a: %V = %A Remove Rows - Remove Rows + Rimuovi Righe Remove Rows @@ -1095,7 +1095,7 @@ Predefinito a: %V = %A Remove Column(s) - Remove Column(s) + Rimuovi Colonne Remove Column(s) @@ -1103,7 +1103,7 @@ Predefinito a: %V = %A Properties… - Properties… + Proprietà… diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts index 56ca33b542..d95341a324 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts @@ -11,12 +11,12 @@ &New Spreadsheet - &New Spreadsheet + &Nowy arkusz kalkulacyjny Creates a new spreadsheet - Creates a new spreadsheet + Tworzy nowy arkusz kalkulacyjny @@ -29,12 +29,12 @@ Align &Bottom - Align &Bottom + Wyrównaj do &dołu Aligns cell contents to the bottom - Aligns cell contents to the bottom + Wyrównuje zawartość komórki do dołu @@ -47,12 +47,12 @@ Align Horizontal &Center - Align Horizontal &Center + Wyrównaj poziomo do środka Aligns cell contents to the horizontal center - Aligns cell contents to the horizontal center + Wyrównuje zawartość komórki poziomo do środka @@ -65,12 +65,12 @@ Align &Left - Align &Left + Wyrównaj do &lewej Aligns cell contents to the left - Aligns cell contents to the left + Wyrównuje zawartość komórki do lewej @@ -83,12 +83,12 @@ Align &Right - Align &Right + Wyrównaj do &prawej Aligns cell contents to the right - Aligns cell contents to the right + Wyrównuje zawartość komórki do prawej @@ -101,12 +101,12 @@ Align &Top - Align &Top + Wyrównaj do &góry Aligns cell contents to the top - Aligns cell contents to the top + Wyrównuje zawartość komórki do góry @@ -119,12 +119,12 @@ Align &Vertical Center - Align &Vertical Center + Wyrównaj pionowo do środka Aligns cell contents to the vertical center - Aligns cell contents to the vertical center + Wyrównuje zawartość komórki pionowo do środka @@ -137,12 +137,12 @@ &Export Spreadsheet - &Export Spreadsheet + &Eksportuj arkusz kalkulacyjny Exports the spreadsheet to a CSV file - Exports the spreadsheet to a CSV file + Eksportuje arkusz do pliku CSV @@ -155,12 +155,12 @@ &Import Spreadsheet - &Import Spreadsheet + &Importuj arkusz kalkulacyjny Imports a CSV file into a new spreadsheet - Imports a CSV file into a new spreadsheet + Importuje plik CSV do nowego arkusza @@ -173,12 +173,12 @@ &Merge Cells - &Merge Cells + &Scal komórki Merges the selected cells - Merges the selected cells + Scala wybrane komórki @@ -191,12 +191,12 @@ Set Alias - Set Alias + Ustaw alias Sets an alias for the selected cell - Sets an alias for the selected cell + Ustawia alias dla wybranej komórki @@ -209,12 +209,12 @@ Sp&lit Cell - Sp&lit Cell + Rozdziel komórkę Splits a previously merged cell - Splits a previously merged cell + Rozdziela poprzednio scaloną komórkę @@ -227,12 +227,12 @@ &Bold Text - &Bold Text + Pogrubiony tekst Sets the text in the selected cells bold - Sets the text in the selected cells bold + Pogrubia tekst w wybranych komórkach @@ -245,12 +245,12 @@ &Italic Text - &Italic Text + Kursywa Sets the text in the selected cells italic - Sets the text in the selected cells italic + Ustawia kursywę dla tekstu w wybranych komórkach @@ -263,12 +263,12 @@ &Underline Text - &Underline Text + Podkreślenie tekstu Underlines the text in the selected cells - Underlines the text in the selected cells + Podkreśla tekst w wybranych komórkach @@ -365,25 +365,25 @@ Insert Rows - Insert Rows + Wstaw wiersze Remove Rows - Remove Rows + Usuń wiersze Insert Columns - Insert Columns + Wstaw kolumny Clear Cells - Clear Cells + Wyczyść komórki @@ -430,16 +430,16 @@ Wyrażenie musi dawać w rezultacie ciąg adresów komórek. To cells - To cells + Do komórek End cell address to bind to. Type '=' to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' to use an expression. -The expression must evaluate to a string of some cell address. + Adres komórki końcowej do powiązania. +Wpisz "=" jeśli chcesz użyć wyrażenia. +Wyrażenie musi dawać w rezultacie ciąg adresów komórek. @@ -449,7 +449,7 @@ The expression must evaluate to a string of some cell address. Sheet - Sheet + Arkusz @@ -539,7 +539,7 @@ switch the design configuration. The property will be created if not exist. Cell range - Cell range + Zakres komórek @@ -554,7 +554,7 @@ switch the design configuration. The property will be created if not exist. Optional property group name - Optional property group name + Opcjonalna nazwa grupy właściwości @@ -577,7 +577,7 @@ switch the design configuration. The property will be created if not exist. Cell Properties - Cell Properties + Właściwości komórki @@ -714,34 +714,34 @@ Arkusz.mój_alias zamiast Arkusz.B1 Export File - Export File + Eksportuj plik Show Spreadsheet - Show Spreadsheet + Pokaż arkusz Sets the text color of cells - Sets the text color of cells + Ustawia kolor tekstu komórek Sets the text color of spreadsheet cells - Sets the text color of spreadsheet cells + Ustawia kolor tekstu komórek arkusza kalkulacyjnego Sets the background color of cells - Sets the background color of cells + Ustawia kolor tła komórek Sets the spreadsheet cells background color - Sets the spreadsheet cells background color + Ustawia kolor tła komórek arkusza kalkulacyjnego @@ -860,12 +860,12 @@ Arkusz.mój_alias zamiast Arkusz.B1 &Content - &Content + &Zawartość &Alias - &Alias + &Alias @@ -902,9 +902,9 @@ Arkusz.mój_alias zamiast Arkusz.B1 Source and target cell count mismatch. Partial binding may still work. Continue? - Source and target cell count mismatch. Partial binding may still work. + Niezgodność liczby komórek źródłowych i docelowych. Częściowe powiązanie może nadal działać. -Continue? +Kontynuować? @@ -967,22 +967,22 @@ Domyślnie %V = %A Uses the custom presentation to display cell string - Uses the custom presentation to display cell string + Używa niestandardowej prezentacji do wyświetlania ciągu komórek Defines a default zoom level for table view from 60% to 160% - Defines a default zoom level for table view from 60% to 160% + Definiuje domyślny poziom powiększenia dla widoku tabeli od 60% do 160% Default zoom level - Default zoom level + Domyślny poziom powiększenia Delimiter character - Delimiter character + Znak separatora @@ -997,7 +997,7 @@ Domyślnie %V = %A Quote character - Quote character + Znak cudzysłowu @@ -1007,7 +1007,7 @@ Domyślnie %V = %A Escape character - Escape character + Znak ucieczki @@ -1040,7 +1040,7 @@ Domyślnie %V = %A Insert %n Row(s) Above - Insert %n Row(s) Above + Wstaw %n wiersz(y) powyżej Insert %n Row(s) Above Insert %n Row(s) Above Insert %n Row(s) Above @@ -1050,7 +1050,7 @@ Domyślnie %V = %A Insert %n Row(s) Below - Insert %n Row(s) Below + Wstaw %n wiersz(y) poniżej Insert %n Row(s) Below Insert %n Row(s) Below Insert %n Row(s) Below @@ -1060,7 +1060,7 @@ Domyślnie %V = %A Insert %n Non-Contiguous Rows - Insert %n Non-Contiguous Rows + Wstaw %n nieciągłych wierszy Insert %n Non-Contiguous Rows Insert %n Non-Contiguous Rows Insert %n Non-Contiguous Rows @@ -1070,7 +1070,7 @@ Domyślnie %V = %A Remove Rows - Remove Rows + Usuń wiersze Remove Rows Remove Rows Remove Rows @@ -1080,7 +1080,7 @@ Domyślnie %V = %A Insert %n Column(s) Left - Insert %n Column(s) Left + Wstaw %n kolumn z lewej strony Insert %n Column(s) Left Insert %n Column(s) Left Insert %n Column(s) Left @@ -1090,7 +1090,7 @@ Domyślnie %V = %A Insert %n Column(s) Right - Insert %n Column(s) Right + Wstaw %n kolumn z prawej strony Insert %n Column(s) Right Insert %n Column(s) Right Insert %n Column(s) Right @@ -1100,7 +1100,7 @@ Domyślnie %V = %A Insert %n Non-Contiguous Columns - Insert %n Non-Contiguous Columns + Wstaw %n nieciągłych kolumn Insert %n Non-Contiguous Columns Insert %n Non-Contiguous Columns Insert %n Non-Contiguous Columns @@ -1110,7 +1110,7 @@ Domyślnie %V = %A Remove Column(s) - Remove Column(s) + Usuń kolumny Remove Column(s) Remove Column(s) Remove Column(s) @@ -1120,31 +1120,31 @@ Domyślnie %V = %A Properties… - Properties… + Właściwości… Bind… - Bind… + Powiąż… Configuration Table… - Configuration Table… + Tabela konfiguracji… Merge Cells - Merge Cells + Scal komórki Split Cells - Split Cells + Podziel komórki @@ -1226,7 +1226,7 @@ Domyślnie %V = %A Zoom Level - Zoom Level + Poziom powiększenia diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts index 4d4e6db682..c53a9bd962 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts @@ -80,7 +80,7 @@ Creates a 2D Draft document - Erstellt ein 2D-Entwurfsdokument + Erstellt ein 2D-Draft-Dokument diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts index 11f9b00fb3..c0236ffda3 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts @@ -80,7 +80,7 @@ Creates a 2D Draft document - Creates a 2D Draft document + Crée un document Draft 2D. diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts index bc9884e030..7d1bd3ce46 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts @@ -90,7 +90,7 @@ Empty File - Empty File + File Vuoto @@ -100,7 +100,7 @@ Opens an existing CAD file or 3D model - Opens an existing CAD file or 3D model + Apre un file CAD esistente o un modello 3D diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts index db5b4be976..4fe46e8f93 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts @@ -80,7 +80,7 @@ Creates a 2D Draft document - Creates a 2D Draft document + შექმნის 2D მონახაზის დოკუმენტს diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts index 9d146a9b3a..029581ac99 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts @@ -16,12 +16,12 @@ Set your basic configuration options below. - Set your basic configuration options below. + Ustaw podstawowe opcje konfiguracji poniżej. These options (and many more) can be changed later in the preferences. - These options (and many more) can be changed later in the preferences. + Opcje te (i wiele więcej) można później zmienić w preferencjach. @@ -57,7 +57,7 @@ Displays the start page - Displays the start page + Wyświetla stronę startową @@ -90,37 +90,37 @@ Empty File - Empty File + Pusty plik Creates a new empty FreeCAD file - Creates a new empty FreeCAD file + Tworzy nowy pusty plik FreeCAD Opens an existing CAD file or 3D model - Opens an existing CAD file or 3D model + Otwiera istniejący plik CAD lub model 3D Parametric Body - Parametric Body + Część parametryczna Creates a body with the Part Design workbench - Creates a body with the Part Design workbench + Tworzy Zawartość w środowisku pracy Projekt Części Creates an assembly project - Creates an assembly project + Tworzy projekt złożenia Creates an architectural project - Creates an architectural project + Tworzy projekt architektoniczny @@ -140,12 +140,12 @@ Open First Start Setup - Open First Start Setup + Otwórz ustawienia pierwszego uruchomienia Do not show this Start page again (start with blank screen) - Do not show this Start page again (start with blank screen) + Nie pokazuj ponownie tej strony startowej (uruchom z pustym ekranem) @@ -234,18 +234,18 @@ An optional custom folder to be displayed on the Start page. Multiple folders can be added using ";;" to separate paths. - An optional custom folder to be displayed on the Start page. -Multiple folders can be added using ";;" to separate paths. + Opcjonalny niestandardowy katalog do wyświetlania na stronie startowej. +Wiele folderów można dodać za pomocą ";;" do oddzielania ścieżek. Shows example files on the start page - Shows example files on the start page + Pokazuje pliki przykładów na stronie startowej The start page is closed automatically when FreeCAD launches - The start page is closed automatically when FreeCAD launches + Strona startowa jest zamykana automatycznie po uruchomieniu FreeCAD diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts index 3123d43ea2..6b715f7126 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts @@ -16,12 +16,12 @@ Set your basic configuration options below. - Set your basic configuration options below. + Налаштуйте свої базові параметри конфігурації нижче. These options (and many more) can be changed later in the preferences. - These options (and many more) can be changed later in the preferences. + Ці параметри (та багато інших) можна буде змінити пізніше у налаштуваннях. @@ -166,12 +166,12 @@ FreeCAD Dark - FreeCAD темна + FreeCAD Темна FreeCAD Light - FreeCAD світла + FreeCAD Світла @@ -187,13 +187,13 @@ FreeCAD Dark Visual theme name - FreeCAD темна + FreeCAD Темна FreeCAD Light Visual theme name - FreeCAD світла + FreeCAD Світла diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 0cdf3cb2e2..7a80c4861f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw - + Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw - + Angle Dimension - + Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw - + Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw - + Dimension - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1477,27 +1477,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw - + Extent Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent - + Vertical extent @@ -1559,17 +1559,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw - + Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points @@ -1577,17 +1577,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw - + Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1625,24 +1625,6 @@ Left clicking on empty space will validate the current dimension. Right clicking - - CmdTechDrawLandmarkDimension - - - TechDraw - - - - - Landmark Dimension - - - - - Inserts a landmark dimension (experimental feature). Use with caution. - - - CmdTechDrawLeaderLine @@ -1664,39 +1646,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw - + Length Dimension - + Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - - - - - Link Dimension to 3D Geometry - - - - - Links the selected TechDraw dimensions to 3D geometry - - - CmdTechDrawMidpoints @@ -1836,17 +1800,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw - + Radius Dimension - + Inserts a radius dimension of a circular edge or arc @@ -2118,17 +2082,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw - + Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points @@ -2136,17 +2100,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw - + Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2276,200 +2240,195 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Add Extent dimension - - + + Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension - + Add horizontal chain dimension - - - + + + Add length dimension - + Add edge length dimension - + Insert dimension - + Add area dimension - - - + + + Add distance dimension - - - + + + Add distanceX chamfer dimension - + Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension - + Add angle dimension - + Add circle to line distance dimension - + Add ellipse to line distance dimension - - + + Add arc length dimension - + Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension - + Add radius dimension - + Add diameter dimension - + Add distanceX dimension - + Add distanceY chamfer dimension - + Add distanceY dimension - + Add distanceX extent dimension - + Add distanceY extent dimension - + Add horizontal coord dimensions - + Add vertical chain dimensions - + Add vertical coord dimensions - + Add oblique chain dimensions - + Add oblique coord dimensions - + Dimension - + Create Dimension DistanceX - + Create Dimension DistanceY - - Create Dimension - - - - + Create dimension @@ -3166,8 +3125,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3208,16 +3165,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3268,17 +3223,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3345,13 +3300,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first - + Too many objects selected @@ -3441,88 +3396,73 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - - - - - + + No view of a part in selection. - + Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection - + There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - - - - - Select 2 point objects and 1 view. (2) - - - - + Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection - + Ellipse curve warning - + B-spline curve warning - + B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. @@ -3538,9 +3478,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3554,22 +3494,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - - - - + Selection contains both 2D and 3D geometry @@ -4254,13 +4189,13 @@ If no object is selected, a file browser opens to select an SVG or image file. + - TechDraw @@ -8941,17 +8876,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw - + Repair Dimension References - + Repairs broken or incorrect dimension references @@ -9813,12 +9748,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension - + Dimension tools @@ -9826,17 +9761,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw - + Area Annotation - + Inserts an annotation showing the area of a selected face @@ -10092,7 +10027,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension @@ -10100,7 +10035,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts index c03121ca16..56e5daaba7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Тэхнічны чарцёж - + Angle Dimension From 3 Points Вымярэнне вугла з трох кропак - + Inserts an angle dimension between 3 selected points Устаўляе вымярэнне вугла паміж трох абраных кропак @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Тэхнічны чарцёж - + Angle Dimension Вымярэнне вугла - + Inserts an angle dimension between two edges Устаўляе вымярэнне вугла паміж двух рэбраў @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Тэхнічны чарцёж - + Diameter Dimension Вымярэнне дыяметру - + Inserts a diameter dimension of a circular edge or arc Устаўляе вымярэнне дыяметру круглага рабра ці дугі @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Тэхнічны чарцёж - + Dimension Вымярэнне - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1509,27 +1509,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Тэхнічны чарцёж - + Extent Dimension Габарытнае вымярэнне - + Inserts a dimension showing the extent (overall length) of an object or feature Устаўляе памер, які паказвае працягласць (агульную даўжыню) аб'екта ці элемента - + Horizontal extent Гарызантальны габарытнае вымярэнне - + Vertical extent Вертыкальны габарытнае вымярэнне @@ -1591,17 +1591,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Тэхнічны чарцёж - + Horizontal Length Dimension Гарызантальнае вымярэнне даўжыні - + Inserts a horizontal length dimension of an edge or distance between two points Устаўляе гарызантальны вымярэнне даўжыні рабра ці адлегласць паміж дзвюма кропкамі @@ -1609,17 +1609,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Тэхнічны чарцёж - + Horizontal Extent Dimension Гарызантальнае вымярэнне даўжыні - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Устаўляе памер, які паказвае гарызантальную працягласць (агульную даўжыню) аб'екта ці элемента. @@ -1657,25 +1657,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Файлы выяў (*.jpg *.jpeg *.png *.bmp);;Усе файлы (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Тэхнічны чарцёж - - - - Landmark Dimension - Знакавае вымярэнне - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Устаўляе знакавае вымярэнне (эксперыментальная функцыя). -Ужывайце з асцярогай. - - CmdTechDrawLeaderLine @@ -1697,39 +1678,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Тэхнічны чарцёж - + Length Dimension Вымярэнне даўжыні - + Inserts a length dimension of an edge or distance between two points Устаўляе вымярэнне даўжыні рабра ці адлегласць паміж дзвюма кропкамі - - CmdTechDrawLinkDimension - - - TechDraw - Тэхнічны чарцёж - - - - Link Dimension to 3D Geometry - Злучыць вымярэнне з трохмернай геаметрыяй - - - - Links the selected TechDraw dimensions to 3D geometry - Прывязвае абраныя вымярэнні тэхнічнага чарцяжа да трохмернай геаметрыі - - CmdTechDrawMidpoints @@ -1869,17 +1832,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Тэхнічны чарцёж - + Radius Dimension Вымярэнне радыуса - + Inserts a radius dimension of a circular edge or arc Устаўляе вымярэнне радыуса круглага рабра ці дугі @@ -2151,17 +2114,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Тэхнічны чарцёж - + Vertical Length Dimension Вымярэнне вертыкальнай даўжыні - + Inserts a vertical length dimension of an edge or distance between two points Устаўляе вертыкальнае вымярэнне даўжыні рабра ці адлегласць паміж дзвюма кропкамі @@ -2169,17 +2132,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Тэхнічны чарцёж - + Vertical Extent Dimension Вымярэнне вертыкальнай працягласці - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Устаўляе памер, які паказвае вертыкальную працягласць (агульную даўжыню) аб'екта ці элемента. @@ -2310,200 +2273,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Стварыць заметку - + Add Extent dimension Дадаць вымярэнне габарытаў - - + + Add horizontal chain dimensions Дадаць гарызантальныя вымярэнні ланцуга - - + + Add horizontal coordinate dimensions Дадаць гарызантальныя вымярэнні каардынат - - - + + + Add 3-points angle dimension Дадаць вымярэнне вугла па трох кропках - + Add horizontal chain dimension Дадаць гарызантальнае вымярэнне ланцуга - - - + + + Add length dimension Дадаць вымярэнне даўжыні - + Add edge length dimension Дадаць вымярэнне даўжыні рабра - + Insert dimension Уставіць вымярэнне - + Add area dimension Дадаць вымярэнне вобласці - - - + + + Add distance dimension Дадаць вымярэнне адлегласці - - - + + + Add distanceX chamfer dimension Дадаць вымярэнне адлегласці Х фаскі - + Add point to line distance dimension Дадаць кропку да вымярэння адлегласці лініі - - - - - - - - + + + + + + + + Add extent dimension Дадаць вымярэнне габарытаў - + Add angle dimension Дадаць вымярэнне вугла - + Add circle to line distance dimension Дадаць акружнасць да вымярэння адлегласці лініі - + Add ellipse to line distance dimension Дадаць эліпс да вымярэння адлегласці лініі - - + + Add arc length dimension Дадаць вымярэнне даўжыні дугі - + Add circle to circle distance dimension Дадаць акружнасць да вымярэння адлегласці акружнасці - + Add ellipse to ellipse distance dimension Дадаць эліпс да вымярэння адлегласці эліпсу - + Add radius dimension Дадаць вымярэнне радыуса - + Add diameter dimension Дадаць вымярэнне дыяметру - + Add distanceX dimension Дадаць вымярэнне адлегласці X - + Add distanceY chamfer dimension Дадаць вымярэнне адлегласці Y фаскі - + Add distanceY dimension Дадаць вымярэнне адлегласці Y - + Add distanceX extent dimension Дадаць вымярэнне адлегласці X габарытаў - + Add distanceY extent dimension Дадаць вымярэнне адлегласці Y габарытаў - + Add horizontal coord dimensions Дадаць гарызантальныя каардынаты вымярэнняў - + Add vertical chain dimensions Дадаць вертыкальныя вымярэнні ланцуга - + Add vertical coord dimensions Дадаць вертыкальныя каардынаты вымярэнняў - + Add oblique chain dimensions Дадаць нахіленыя вымярэнні ланцуга - + Add oblique coord dimensions Дадаць нахіленыя каардынаты вымярэнняў - + Dimension Вымярэнне - + Create Dimension DistanceX Стварыць вымярэнне DistanceX - + Create Dimension DistanceY Стварыць вымярэнне DistanceY - - Create Dimension - Стварыць вымярэнне - - - + Create dimension Стварыць вымярэнне @@ -3200,8 +3158,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3242,16 +3198,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3303,17 +3257,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3380,13 +3334,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Спачатку абярыце аб'ект - + Too many objects selected Абрана зашмат аб'ектаў @@ -3477,88 +3431,73 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Зачыніць дыялогавае акно бягучай задачы і паўтарыць спробу - - There are no 3D edges or vertices in your selection - У вашым выбары няма трохмерных рэбраў ці вяршынь - - - - + + No view of a part in selection. Без выгляду дэталі ў абраным. - + Cannot make 2D extent dimension from selection Не атрымалася зрабіць двухмернае габарытнае вымярэнне з абранага - + Cannot make 3D extent dimension from selection Не атрымалася зрабіць трохмернае габарытнае вымярэнне з абранага - + There is no dimension in your selection У выбары няма вымярэння - - Select 2 point objects and 1 view. (1) - Абраць два кропкавых аб'екта і адзін выгляд. (1) - - - - Select 2 point objects and 1 view. (2) - Абярыце два кропкавых аб'екта і адзін выгляд. (2) - - - + Cannot make 2D dimension from selection Не атрымалася зрабіць двухмернае вымярэнне з абранага - + Cannot make 3D dimension from selection Не атрымалася зрабіць трохмернае вымярэнне з абранага - + Ellipse curve warning Папярэджанне крывой эліпса - + B-spline curve warning Папярэджанне крывой B-сплайна - + B-spline curve error Памылка крывой B-сплайна - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Абранае рабро ўяўляе сабой B-сплайн, і таму дыяметр/дыяметр вылічыць не атрымалася. - + Create a page first. Спачатку стварыць старонку. @@ -3574,9 +3513,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3591,26 +3530,21 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Абранае рабро ўяўляе сабой эліпс. Значэнне будзе прыблізным. Ці працягнуць? - + Selected edge is a B-spline. Value will be approximate. Continue? Абранае рабро ўяўляе сабой B-сплайн. Значэнне будзе прыблізным. Ці працягнуць? - - There is no 3D object in your selection - У вашым выбары няма трохмернага аб'екта - - - + Selection contains both 2D and 3D geometry Вылучэнне змяшчае дзвюхмерную і трохмерную геаметрыю @@ -4303,13 +4237,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Не атрымалася зрабіць вымярэнне з абранага + - TechDraw Тэхнічны чарцёж @@ -9059,17 +8993,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Тэхнічны чарцёж - + Repair Dimension References Аднавіць спасылкі на вымярэнні - + Repairs broken or incorrect dimension references Аднаўляе пашкоджаныя ці няправільныя спасылкі на вымярэнні @@ -9933,12 +9867,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Вымярэнне - + Dimension tools Інструменты для вызначэння вымярэнняў @@ -9946,17 +9880,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Тэхнічны чарцёж - + Area Annotation Вобласць заметкі - + Inserts an annotation showing the area of a selected face Устаўляе заметкі, якія паказваюць вобласць абранай грані @@ -10212,7 +10146,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Уставіць гарызантальнае габарытнае вымярэнне @@ -10220,7 +10154,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Уставіць вертыкальнае габарытнае вымярэнне diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 40d4cf8953..53fdc44099 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Cota - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Dimensió d'extensió - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Fitxers d'imatge (*.jpg *.jpeg *.png *.bmp);;Tots els fitxers (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Enllaça una cota a una geometria 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Crear Anotació - + Add Extent dimension Afegir cota d'extensió - - + + Add horizontal chain dimensions Afegir cotes de cadena horitzontal - - + + Add horizontal coordinate dimensions Afegir cotes de coordenada horitzontal - - - + + + Add 3-points angle dimension Afegir cota angular de 3 punts - + Add horizontal chain dimension Afegir cota de cadena horitzontal - - - + + + Add length dimension Afegir cota de longitud - + Add edge length dimension Afegir cota de longitud de vora - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Afegir cotes de coordenada horitzontal - + Add vertical chain dimensions Afegir cotes de cadena vertical - + Add vertical coord dimensions Afegir cotes de coordenada vertical - + Add oblique chain dimensions Afegir cotes de cadena obliqua - + Add oblique coord dimensions Afegir cotes de coordenada obliqua - + Dimension Cota - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Crea una cota - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Seleccioneu primer un objecte - + Too many objects selected Hi ha masses objectes seleccionats @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Crear una pàgina primer. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? L'aresta seleccionada és una el·lipse. El valor serà aproximat. Voleu continuar? - + Selected edge is a B-spline. Value will be approximate. Continue? L'aresta seleccionada és una B-Spline. El valor serà aproximat. Voleu continuar? - - There is no 3D object in your selection - No hi ha cap objecte 3D en la selecció - - - + Selection contains both 2D and 3D geometry La selecció conté ambdues geometries 2D i 3D @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -8998,17 +8933,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Reparar referències de cota - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9872,12 +9807,12 @@ hi ha un diàleg de tasca obert. CmdTechDrawCompDimensionTools - + Dimension Cota - + Dimension tools Dimension tools @@ -9885,17 +9820,17 @@ hi ha un diàleg de tasca obert. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10151,7 +10086,7 @@ hi ha un diàleg de tasca obert. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10159,7 +10094,7 @@ hi ha un diàleg de tasca obert. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 32dd564e75..22514d33bd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Rozměr - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Rozsah kóty - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Obrázkové soubory (*.jpg *.jpeg *.png *.bmp);;Všechny soubory (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Propojit kótu s 3D geometrií - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Vytvořit poznámku - + Add Extent dimension - - + + Add horizontal chain dimensions Vytvoř horizontální řetězovou kótu - - + + Add horizontal coordinate dimensions Vytvoř horizontální souřadnicovou kótu - - - + + + Add 3-points angle dimension Vytvoř kótu úhlu ze tří bodů - + Add horizontal chain dimension Vytvoř horizontální řetězovou kótu - - - + + + Add length dimension Vytvoř délkovou kótu - + Add edge length dimension Vytvoř kótu délky okraje - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Vytvoř horizontální souřadnice - + Add vertical chain dimensions Vytvoř vertikální řetězovou kótu - + Add vertical coord dimensions Vytvoř vertikální souřadnice - + Add oblique chain dimensions Vytvoř šikmou řetězovou kótu - + Add oblique coord dimensions Vytvoř šikmou souřadnicovou kótu - + Dimension Rozměr - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Vytvořit kótu - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Nejprve vyberte objekt - + Too many objects selected Příliš mnoho vybraných objektů @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Vytvořte nejprve stránku. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Vybraná hrana je elipsou. Hodnota bude přibližná. Pokračovat? - + Selected edge is a B-spline. Value will be approximate. Continue? Vybraná hrana je B-spline. Hodnota bude přibližná. Pokračovat? - - There is no 3D object in your selection - Ve Vašem výběru není žádný 3D objekt - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9007,17 +8942,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9881,12 +9816,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Rozměr - + Dimension tools Dimension tools @@ -9894,17 +9829,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10160,7 +10095,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10168,7 +10103,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index b3bdd835e3..a894072b1f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Winkelmaß über 3 Punkte - + Inserts an angle dimension between 3 selected points Fügt ein Winkelmaß über 3 ausgewählte Punkte ein @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Winkelmaß - + Inserts an angle dimension between two edges Fügt ein Winkelmaß zwischen zwei Kanten ein @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Durchmessermaß - + Inserts a diameter dimension of a circular edge or arc Fügt das Durchmessermaß einer Kreiskante oder eines Bogens ein @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Abmessung - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -958,7 +958,7 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts Adds a cosmetic circle based on two selected vertices, where the first is the center point and the second is the radius - Adds a cosmetic circle based on two selected vertices, where the first is the center point and the second is the radius + Fügt einen Hilfskreis basierend auf zwei ausgewählten Punkten hinzu, wobei der zuerst ausgewählte der Mittelpunkt ist und der zweite den Radius festlegt @@ -977,7 +977,7 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts Adds a cosmetic circle that passes through 3 selected perimeter points - Adds a cosmetic circle that passes through 3 selected perimeter points + Fügt einen Hilfskreis hinzu, der durch 3 ausgewählte Punkte verläuft @@ -1479,27 +1479,27 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Dimension erweitern - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts Bilddateien (*.jpg *.jpeg *.png *.bmp);;Alle Dateien (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Maß mit 3D-Geometrie verknüpfen - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1727,7 +1691,7 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts New Page - New Page + Neues Zeichnungsblatt @@ -1838,17 +1802,17 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Ein Linksklick auf einen leeren Bereich bestätigt das aktuelle Maß. Ein Rechts CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Beschriftung erstellen - + Add Extent dimension Bemaßung erweitern - - + + Add horizontal chain dimensions Horizontale Maßketten hinzufügen - - + + Add horizontal coordinate dimensions Horizontale Koordinatenmaße hinzufügen - - - + + + Add 3-points angle dimension Winkelmaß über 3 Punkte hinzufügen - + Add horizontal chain dimension Horizontale Maßketten hinzufügen - - - + + + Add length dimension Längenmaß hinzufügen - + Add edge length dimension Kantenlängen-Maß hinzufügen - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Horizontale Koordinatenmaße erstellen - + Add vertical chain dimensions Vertikale Maßketten hinzufügen - + Add vertical coord dimensions Vertikale Koordinatenmaße hinzufügen - + Add oblique chain dimensions Schräge Maßketten hinzufügen - + Add oblique coord dimensions Schräge Koordinatenmaße hinzufügen - + Dimension Maß - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Maß erstellen - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Zuerst ein Objekt auswählen - + Too many objects selected Zu viele Objekte ausgewählt @@ -3441,91 +3396,76 @@ If no object is selected, a file browser opens to select an SVG or image file. Page contains DrawViewBIM which will not be exported. Continue? - Page contains DrawViewBIM which will not be exported. Continue? + Das Zeichnungsblatt enthält ein DrawViewBIM-Objekt, das nicht exportiert wird. Fortfahren? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Zuerst ein Zeichnungsblatt erstellen. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Ausgewählte Kante ist eine Ellipse. Wert wird angenähert. Fortfahren? - + Selected edge is a B-spline. Value will be approximate. Continue? Ausgewählte Kante ist ein B-Spline. Wert wird angenähert. Fortfahren? - - There is no 3D object in your selection - Es befindet sich kein 3D-Objekt in der Auswahl - - - + Selection contains both 2D and 3D geometry Die Auswahl enthält sowohl 2D als auch 3D Geometrie @@ -3615,17 +3550,17 @@ If no object is selected, a file browser opens to select an SVG or image file. You must select a base View for the circle. - You must select a base View for the circle. + Es muss eine Basisansicht für den Kreis ausgewählt werden. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. + In der Auswahl befindet sich weder ein Hilfskreis noch ein Hilfskreisbogen. Please select a center for the circle. - Please select a center for the circle. + Bitte einen Mittelpunkt für den Kreis auswählen. @@ -3844,7 +3779,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Export Page as PDF - Export Page as PDF + Blatt als PDF-Datei exportieren @@ -3855,7 +3790,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Export page as SVG - Seite als SVG exportieren + Zeichnungsblatt als SVG exportieren @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -4939,7 +4874,7 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Print center marks - Print center marks + Mittelpunktsmarkierungen drucken @@ -5210,7 +5145,7 @@ for using drawings a 1:1 cutting guide. Show arc centers in printed output - Zeigt die Bogenmittenmarkierungen in Ausdrucken an + Zeigt die Mittelpunkte von Kreisbögen in Ausdrucken an @@ -6459,7 +6394,7 @@ Do you want to continue? Bubble shape - Blasenform + Rahmenform @@ -6989,12 +6924,12 @@ Do you want to continue? Circular run-out - Circular run-out + (Rund-/Plan-) Lauf Total run-out - Total run-out + Gesamt- (rund-/plan-) lauf @@ -7361,7 +7296,7 @@ the negated value for 'Undertolerance'. Undertolerance - Undertolerance + Unteres Abmaß @@ -7480,7 +7415,7 @@ by negative value of 'Overtolerance'. Set dimension line angle to default (orthographic view) - Set dimension line angle to default (orthographic view) + Setzt den Winkel der Maßlinie auf die Standardeinstellung (orthogonale Ansicht) @@ -8814,7 +8749,7 @@ using the given X/Y spacings Centerlines/Threading - Centerlines/Threading + Mittellinien/Gewinde @@ -9001,17 +8936,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Maßreferenzen reparieren - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9419,7 +9354,7 @@ noch ein Aufgaben-Dialog geöffnet ist. Adds a cosmetic circle based on a selected centerpoint - Adds a cosmetic circle based on a selected centerpoint + Fügt einen Hilfskreis hinzu, basierend auf einem ausgewählten Mittelpunkt @@ -9875,12 +9810,12 @@ noch ein Aufgaben-Dialog geöffnet ist. CmdTechDrawCompDimensionTools - + Dimension Maß - + Dimension tools Dimension tools @@ -9888,17 +9823,17 @@ noch ein Aufgaben-Dialog geöffnet ist. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Flächeninhalt - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10039,7 +9974,7 @@ noch ein Aufgaben-Dialog geöffnet ist. Creates a length dimension in with axonometric view, using selected edges or vertex pairs to define direction and measurement - Creates a length dimension in with axonometric view, using selected edges or vertex pairs to define direction and measurement + Erstellt ein Längenmaß in einer axonometrischer Ansicht und verwendet ausgewählte Kanten oder Knotenpaare zum Festlegen von Richtung und Messung @@ -10154,7 +10089,7 @@ noch ein Aufgaben-Dialog geöffnet ist. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10162,7 +10097,7 @@ noch ein Aufgaben-Dialog geöffnet ist. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index 0c71d02b72..3c63e539cb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Τεχνική Σχεδίαση - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Τεχνική Σχεδίαση - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Τεχνική Σχεδίαση - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Τεχνική Σχεδίαση - + Dimension Διάσταση - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Τεχνική Σχεδίαση - + Extent Dimension Extent Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Τεχνική Σχεδίαση - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Τεχνική Σχεδίαση - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Τεχνική Σχεδίαση - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Τεχνική Σχεδίαση - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Τεχνική Σχεδίαση - - - - Link Dimension to 3D Geometry - Link Dimension to 3D Geometry - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Τεχνική Σχεδίαση - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Τεχνική Σχεδίαση - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Τεχνική Σχεδίαση - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Δημιουργία Σημείωσης - + Add Extent dimension Προσθήκη διάστασης Έκτασης - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Διάσταση - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Create Dimension - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Επιλέξτε πρώτα ένα αντικείμενο - + Too many objects selected Επιλέχθηκαν πάρα πολλά αντικείμενα @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Δημιουργήστε πρώτα μια σελίδα. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Δεν υπάρχει κανένα τρισδιάστατο αντικείμενο στην επιλογή σας - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Τεχνική Σχεδίαση @@ -9009,17 +8944,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Τεχνική Σχεδίαση - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9882,12 +9817,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Διάσταση - + Dimension tools Dimension tools @@ -9895,17 +9830,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Τεχνική Σχεδίαση - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10161,7 +10096,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10169,7 +10104,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index b1267e6c80..975d68b4ef 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Cota - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Extender cota - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Archivos de imagen (*.jpg *.jpeg *.png *.bmp);;Todos los archivos (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Enlazar cota a geometría 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Crear Anotación - + Add Extent dimension Añadir cota de extensión - - + + Add horizontal chain dimensions Añadir cotas horizontales encadenadas - - + + Add horizontal coordinate dimensions Agregar cotas de coordenada horizontal - - - + + + Add 3-points angle dimension Agrega la cota de ángulo de 3 puntos - + Add horizontal chain dimension Añadir cota horizontal encadenada - - - + + + Add length dimension Añadir cota de longitud - + Add edge length dimension Añadir cota de longitud de borde - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Añadir cotas de coordenadas horizontales - + Add vertical chain dimensions Añadir cota vertical encadenada - + Add vertical coord dimensions Añadir cotas de coordenadas verticales - + Add oblique chain dimensions Añadir cotas oblicuas encadenadas - + Add oblique coord dimensions Añadir cotas coordenadas oblicuas - + Dimension Cota - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Crear Cota - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Seleccione un objeto en primer lugar - + Too many objects selected Demasiados objetos seleccionados @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Cree una página de dibujo primero. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? El borde seleccionado es un Ellipse. El valor será aproximado. ¿Continuar? - + Selected edge is a B-spline. Value will be approximate. Continue? El borde seleccionado es una B-Spline. El valor será aproximado. ¿Continuar? - - There is no 3D object in your selection - No hay ningún objeto 3D en su selección - - - + Selection contains both 2D and 3D geometry La selección contiene geometría en 2D y en 3D @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9007,17 +8942,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Reparar referencias de cotas - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ hay un diálogo de tareas abierto. CmdTechDrawCompDimensionTools - + Dimension Cota - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ hay un diálogo de tareas abierto. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ hay un diálogo de tareas abierto. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ hay un diálogo de tareas abierto. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 69042546c8..d94755d195 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Kota - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Hedadura-kota - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Irudi-fitxategiak (*.jpg *.jpeg *.png *.bmp);;Fitxategi guztiak (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Estekatu kota 3D geometria batekin - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Sortu oharpena - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Kota - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Sortu kota - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Hautatu objektu bat - + Too many objects selected Objektu gehiegi hautatuta @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Lehenengo, sortu orrialde bat. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Ez dago 3D objekturik zure hautapenean - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9008,17 +8943,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Konpondu kota-erreferentziak - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9882,12 +9817,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Kota - + Dimension tools Dimension tools @@ -9895,17 +9830,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10161,7 +10096,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10169,7 +10104,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index c17f14603a..d9b6a7c322 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Dimensio - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Extent Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Linkitä Mitta 3D-geometriaan - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Lisää huomautus - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Dimensio - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Luo Mitta - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Valitse ensin objekti - + Too many objects selected Liian monta objektia valittu @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Luo sivu ensin. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Valinnassa ei ole 3D-objektia - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9004,17 +8939,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Korjaa dimension referensejä - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9877,12 +9812,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Dimensio - + Dimension tools Dimension tools @@ -9890,17 +9825,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10156,7 +10091,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10164,7 +10099,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index b258101802..cdc9010aee 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Dimension - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Insérer une cote - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Fichiers image (*.jpg *.jpeg *.png *.bmp);;Tous les fichiers (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Lier une cote à une géométrie 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Créer une annotation - + Add Extent dimension Ajouter une cote étendue - - + + Add horizontal chain dimensions Ajouter des cotes horizontales - - + + Add horizontal coordinate dimensions Ajouter des cotes parallèles horizontales - - - + + + Add 3-points angle dimension Ajouter une cote angulaire entre 3 points - + Add horizontal chain dimension Ajouter une cote horizontale - - - + + + Add length dimension Ajouter une cote de longueur - + Add edge length dimension Ajouter une cote de longueur de l'arête - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Ajouter des cotes parallèles horizontales - + Add vertical chain dimensions Ajouter des cotes verticales - + Add vertical coord dimensions Ajouter des cotes parallèles verticales - + Add oblique chain dimensions Ajouter des cotes inclinées - + Add oblique coord dimensions Ajouter des cotes parallèles inclinées - + Dimension Cote - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Créer une cote - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Sélectionner d’abord un objet - + Too many objects selected Trop d'éléments sélectionnés @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Créer d'abord une feuille @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? L'arête sélectionnée est une ellipse. La valeur sera approximative. Voulez-vous continuer ? - + Selected edge is a B-spline. Value will be approximate. Continue? L'arête sélectionnée fait partie d'une B-spline. La valeur sera approximative. Voulez-vous continuer ? - - There is no 3D object in your selection - Pas d'objet 3D sélectionné - - - + Selection contains both 2D and 3D geometry La sélection contient à la fois une géométrie 2D et 3D. @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9002,17 +8937,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Réparer les références d'une cote - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9874,12 +9809,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Cote - + Dimension tools Outils de cotation @@ -9887,17 +9822,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10153,7 +10088,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10161,7 +10096,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 2d4cdb3aa0..de6d27e4a2 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Tehničko Crtanje - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Tehničko Crtanje - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Tehničko Crtanje - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Tehničko Crtanje - + Dimension Dimenzija - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Tehničko Crtanje - + Extent Dimension Proširena dimenzija - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Tehničko Crtanje - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Tehničko Crtanje - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Slikovne datoteke (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Tehničko Crtanje - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Tehničko Crtanje - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Tehničko Crtanje - - - - Link Dimension to 3D Geometry - Poveži dimenziju na 3D geometriju - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Tehničko Crtanje - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Tehničko Crtanje - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Tehničko Crtanje - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Stvori Napomenu - + Add Extent dimension Umetnite dimenziju do granice - - + + Add horizontal chain dimensions Dodaj vodoravne dimenzije lanca - - + + Add horizontal coordinate dimensions Dodaj vodoravne koordinatne dimenzije - - - + + + Add 3-points angle dimension Dodaj kut pomoću tri točke - + Add horizontal chain dimension Dodaj vodoravnu dimenziju lanca - - - + + + Add length dimension Umetnite dimenziju dužine - + Add edge length dimension Dodaj dimenziju dužine ruba - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Dodaj vodoravne dimenzije koordinata - + Add vertical chain dimensions Dodaj okomite dimenzije lanca - + Add vertical coord dimensions Dodaj okomite dimenzije koordinata - + Add oblique chain dimensions Dodaj kose dimenzije lanca - + Add oblique coord dimensions Dodaj kose dimenzije koordinata - + Dimension Dimenzija - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Stvori Dimenziju - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Najprije odaberite objekt - + Too many objects selected Previše objekata odabrano @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Najprije napravite stranicu. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Odabrani rub je elipsa. Vrijednost će biti približno. Nastaviti? - + Selected edge is a B-spline. Value will be approximate. Continue? Odabrani rub je B-spline. Vrijednost će biti približno. Nastaviti? - - There is no 3D object in your selection - Nema 3D objekta u odabranom - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4263,13 +4198,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Tehničko Crtanje @@ -9052,17 +8987,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Tehničko Crtanje - + Repair Dimension References Popravi dimenzije referenci - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9928,12 +9863,12 @@ jer je otvoren dijalog zadataka. CmdTechDrawCompDimensionTools - + Dimension Dimenzija - + Dimension tools Dimension tools @@ -9941,17 +9876,17 @@ jer je otvoren dijalog zadataka. CmdTechDrawAreaDimension - + TechDraw Tehničko Crtanje - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10207,7 +10142,7 @@ jer je otvoren dijalog zadataka. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10215,7 +10150,7 @@ jer je otvoren dijalog zadataka. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index 814b87c7f5..ca2406cce9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw MűszakiRajz - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw MűszakiRajz - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw MűszakiRajz - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw MűszakiRajz - + Dimension Dimenzió - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw MűszakiRajz - + Extent Dimension Tartomány mérete - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw MűszakiRajz - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw MűszakiRajz - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Kép fájlok (*.jpg *.jpeg *.png *.bmp);;Összes fájl (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - MűszakiRajz - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw MűszakiRajz - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - MűszakiRajz - - - - Link Dimension to 3D Geometry - Dimenzió összekötése 3D geometriához - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw MűszakiRajz - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw MűszakiRajz - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw MűszakiRajz - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Széljegyzet létrehozása - + Add Extent dimension Kiterjedési méret hozzáadása - - + + Add horizontal chain dimensions Vízszintes láncméretek hozzáadása - - + + Add horizontal coordinate dimensions Vízszintes koordinátaméretek hozzáadása - - - + + + Add 3-points angle dimension 3 pontos szögméret hozzáadása - + Add horizontal chain dimension Vízszintes láncméret hozzáadása - - - + + + Add length dimension Hossz méret hozzáadása - + Add edge length dimension Élek hosszméretének hozzáadása - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Vízszintes koordinátaméretek hozzáadása - + Add vertical chain dimensions Függőleges láncméretek hozzáadása - + Add vertical coord dimensions Függőleges koordinátaméretek hozzáadása - + Add oblique chain dimensions Dőlt láncméretek hozzáadása - + Add oblique coord dimensions Dőlt koordinátaméretek hozzáadása - + Dimension Dimenzió - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Méret létrehozása - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Először válasszon ki egy objektumot - + Too many objects selected Túl sok kijelölt objektum @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Először hozzon létre egy oldalt. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? A kiválasztott él egy ellipszis. Az érték hozzávetőleges lesz. Folytatás? - + Selected edge is a B-spline. Value will be approximate. Continue? A kiválasztott él egy B-görbe. Az érték hozzávetőleges lesz. Folytatás? - - There is no 3D object in your selection - Nem található 3D objektum a kijelölésében - - - + Selection contains both 2D and 3D geometry A kiválasztás 2d és 3d geometriát is tartalmaz @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw MűszakiRajz @@ -9006,17 +8941,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw MűszakiRajz - + Repair Dimension References Méret referenciák javítása - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ van egy nyitott feladat párbeszédpanel. CmdTechDrawCompDimensionTools - + Dimension Dimenzió - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ van egy nyitott feladat párbeszédpanel. CmdTechDrawAreaDimension - + TechDraw MűszakiRajz - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ van egy nyitott feladat párbeszédpanel. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ van egy nyitott feladat párbeszédpanel. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index 0a37550d7c..2b01f63122 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Dimensione - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Quota di estensione - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking File immagine (*.jpg *.jpeg *.png *.bmp);;Tutti i file (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Link alla geometria 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Quota del Raggio - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Crea annotazione - + Add Extent dimension Aggiungi quota di estensione - - + + Add horizontal chain dimensions Aggiungi quote lineari orizzontali in serie - - + + Add horizontal coordinate dimensions Aggiungi quote di coordinate orizzontali - - - + + + Add 3-points angle dimension Aggiungi quota angolare per 3 punti - + Add horizontal chain dimension Aggiungi quota lineare orizzontale in serie - - - + + + Add length dimension Aggiungi una quota lineare - + Add edge length dimension Aggiungi una quota di lunghezza dello spigolo - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Aggiungi quote di coordinate orizzontali - + Add vertical chain dimensions Aggiungi quote lineari verticali in serie - + Add vertical coord dimensions Aggiungi quote di coordinate verticali - + Add oblique chain dimensions Aggiungi quote lineari oblique in serie - + Add oblique coord dimensions Aggiungi quote di coordinate oblique - + Dimension Dimensione - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Crea quota - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Prima selezionare un oggetto - + Too many objects selected Troppi oggetti selezionati @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Prima creare una pagina. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Il bordo selezionato è un'Ellisse. Il valore sarà approssimativo. Continuare? - + Selected edge is a B-spline. Value will be approximate. Continue? Il bordo selezionato è una B-spline. Il valore sarà approssimativo. Continuare? - - There is no 3D object in your selection - Nella selezione non esiste alcun oggetto 3D - - - + Selection contains both 2D and 3D geometry La selezione contiene geometria 2D e 3D @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9005,17 +8940,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Ripara riferimenti quote - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9879,12 +9814,12 @@ c'è una finestra di dialogo azioni aperte. CmdTechDrawCompDimensionTools - + Dimension Dimensione - + Dimension tools Dimension tools @@ -9892,17 +9827,17 @@ c'è una finestra di dialogo azioni aperte. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10158,7 +10093,7 @@ c'è una finestra di dialogo azioni aperte. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10166,7 +10101,7 @@ c'è una finestra di dialogo azioni aperte. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 357c91d691..a67ae2440d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension 角度寸法 - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension 直径寸法 - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension 寸法 - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Extent Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking 画像ファイル (*.jpg *.jpeg *.png *.bmp);;すべてのファイル (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension 長さ寸法 - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - 寸法を3Dジオメトリとリンク - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension 半径寸法 - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.注釈を作成 - + Add Extent dimension 範囲寸法を追加 - - + + Add horizontal chain dimensions 水平方向の連鎖寸法を追加 - - + + Add horizontal coordinate dimensions 水平座標寸法を追加 - - - + + + Add 3-points angle dimension 3点角度寸法を追加 - + Add horizontal chain dimension 水平方向の連鎖寸法を追加 - - - + + + Add length dimension 長さ寸法を追加 - + Add edge length dimension エッジ長さ寸法を追加 - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions 水平座標寸法を追加 - + Add vertical chain dimensions 垂直方向の連鎖寸法を追加 - + Add vertical coord dimensions 垂直座標寸法を追加 - + Add oblique chain dimensions 斜め方向の連鎖寸法を追加 - + Add oblique coord dimensions 斜め座標寸法を追加 - + Dimension 寸法 - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - 寸法を作成 - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first 最初にオブジェクトを選択してください - + Too many objects selected 選択されているオブジェクトが多すぎます。 @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. 最初にページを作成してください @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? 選択されたエッジは楕円です。値は概算です。続けますか？ - + Selected edge is a B-spline. Value will be approximate. Continue? 選択されたエッジはB-スプラインです。値は概算です。続けますか？ - - There is no 3D object in your selection - 3Dオブジェクトが選択されていません。 - - - + Selection contains both 2D and 3D geometry 選択範囲に2Dと3Dのジオメトリを含んでいます。 @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -8995,17 +8930,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References 寸法参照を修復 - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9867,12 +9802,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension 寸法 - + Dimension tools 寸法ツール @@ -9880,17 +9815,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10146,7 +10081,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10154,7 +10089,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index c05a4e9a91..91111ab725 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -11,12 +11,12 @@ Centerline Between 2 Lines - Centerline Between 2 Lines + ცენტრის ხაზის გავლება 2 ხაზს შუა Adds a centerline between 2 selected lines - Adds a centerline between 2 selected lines + ამატებს ცენტრალურ ხაზს 2 მონიშნულ ხაზს შორის @@ -29,12 +29,12 @@ Centerline Between 2 Points - Centerline Between 2 Points + ცენტრის ხაზის გავლება 2 წერტილს შუა Adds a centerline between 2 selected points - Adds a centerline between 2 selected points + ამატებს ცენტრალურ ხაზს 2 მონიშნულ წერტილს შორის @@ -47,7 +47,7 @@ Cosmetic Line Through 2 Points - Cosmetic Line Through 2 Points + დამატებითი ხაზი 2 წერტილს შორის @@ -58,19 +58,19 @@ CmdTechDraw3PtAngleDimension - + TechDraw ტექნიკური ნახაზი - + Angle Dimension From 3 Points - Angle Dimension From 3 Points + კუთხის განზომილება 3 წერტილიდან - + Inserts an angle dimension between 3 selected points - Inserts an angle dimension between 3 selected points + ჩასვამს კუთხის განზომილებას 3 მონიშნულ წერტილს შორის @@ -89,19 +89,19 @@ CmdTechDrawAngleDimension - + TechDraw ტექნიკური ნახაზი - + Angle Dimension კუთხის განზომილება - + Inserts an angle dimension between two edges - Inserts an angle dimension between two edges + ჩასვამს კუთხის განზომილებას ორ წიბოს შეორის @@ -114,7 +114,7 @@ Text Annotation - Text Annotation + ტექსტის ანოტაცია @@ -137,7 +137,7 @@ Inserts a view of a BIM section plane - Inserts a view of a BIM section plane + ჩასვამს BIM კვეთის სიბრტყის ხედს @@ -150,12 +150,12 @@ Balloon Annotation - Balloon Annotation + სქოლიოს ანოტაცია Inserts a new balloon annotation in the selected view - Inserts a new balloon annotation in the selected view + ჩასვამს ახალ სქოლიო ანოტაციას მონიშნულ ხედში @@ -178,7 +178,7 @@ Centerline faces - Centerline faces + ცენტრალური ხაზის სიბრტყეები @@ -196,7 +196,7 @@ Inserts a new clip group for the selected view - Inserts a new clip group for the selected view + ჩასვამს ახალ კვეთების ჯგუფს მონიშნული ხედისთვის @@ -209,12 +209,12 @@ Add View To Clip Group - Add View To Clip Group + ხედის ჩამატება კვეთების ჯგუფში Adds the selected view to a clip group - Adds the selected view to a clip group + ამატებს მონიშნულ ხედს კვეთების ჯგუფში @@ -227,12 +227,12 @@ Remove From Clip Group - Remove From Clip Group + წაშლა კვეთების ჯგუფიდან Removes a view based on the selected clip group - Removes a view based on the selected clip group + შლის ხედს მონიშნული კვეთების ჯგუფზე დაყრდნობით @@ -245,7 +245,7 @@ Complex Section View - Complex Section View + კომპლექსური ჭრილის ხედი @@ -268,7 +268,7 @@ Removes the selected cosmetic object from the page - Removes the selected cosmetic object from the page + წაშლის მონიშნულ დამხმარე ობიექტს გვერდიდან @@ -286,7 +286,7 @@ Adds a cosmetic vertex - Adds a cosmetic vertex + ამატებს დამხმარე წვეროს @@ -304,12 +304,12 @@ Inserts a cosmetic vertex - Inserts a cosmetic vertex + ჩასვამს დამხმარე წვეროს Cosmetic vertex - Cosmetic vertex + დამხმარე წვერო @@ -322,7 +322,7 @@ Edit Line Appearance - Edit Line Appearance + ხაზის გარეგნობის ჩასწორება @@ -351,35 +351,35 @@ CmdTechDrawDiameterDimension - + TechDraw ტექნიკური ნახაზი - + Diameter Dimension დიამეტრის განზომილება - + Inserts a diameter dimension of a circular edge or arc - Inserts a diameter dimension of a circular edge or arc + ჩასვამს წრიული წიბოს ან რკალის დიამეტრის განზომილებას CmdTechDrawDimension - + TechDraw ტექნიკური ნახაზი - + Dimension ზომა - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -404,7 +404,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Inserts a view of a Draft object "Draft" is a workbench and should not be translated - Inserts a view of a Draft object + ჩასვამს მონახაზის ობიექტის ხედს @@ -422,7 +422,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Exports the current page as a DXF - Exports the current page as a DXF + გაიტანს მიმდინარე გვერდს DXF ფორმატში @@ -445,7 +445,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Exports the current page as an SVG - Exports the current page as an SVG + გაიტანს მიმდინარე გვერდს SVG ფორმატში @@ -476,12 +476,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Area Annotation - Area Annotation + ფართობის ანოტაცია Calculates the area of multiple selected faces - Calculates the area of multiple selected faces + გამოთვლის მონიშნული ზედაპირების ფართობის @@ -572,7 +572,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Chamfer Dimension - Horizontal Chamfer Dimension + ჰორიზონტალური კუთხის ნაზოლის განზომილება @@ -614,12 +614,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Adds centerlines to the selected circles and arcs - Adds centerlines to the selected circles and arcs + ამატებს ცენტრალურ ხაზებს მონიშნულ წრეწირებს და რკალებს Adds centerlines to selected circles and arcs: - Adds centerlines to selected circles and arcs: + ამატებს ცენტრალურ ხაზებს მონიშნულ წრეწირებს და რკალებს: @@ -637,7 +637,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Adds centerlines to selected circles and arcs - Adds centerlines to selected circles and arcs + ამატებს ცენტრალურ ხაზებს მონიშნულ წრეწირებს და რკალებს @@ -650,7 +650,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Chain Dimension - Horizontal Chain Dimension + ჰორიზონტალური ჯაჭვის განზომილება @@ -668,7 +668,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Coordinate Dimension - Horizontal Coordinate Dimension + ჰორიზონტალური კოორდინატების განზომილება @@ -687,7 +687,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Chain Dimension - Horizontal Chain Dimension + ჰორიზონტალური ჯაჭვის განზომილება @@ -711,7 +711,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Chamfer Dimension - Horizontal Chamfer Dimension + ჰორიზონტალური კუთხის ნაზოლის განზომილება @@ -731,7 +731,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Horizontal Coordinate Dimension - Horizontal Coordinate Dimension + ჰორიზონტალური კოორდინატების განზომილება @@ -750,12 +750,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Arc Length Dimension - Arc Length Dimension + რკალის სიგრძის განზომილება Inserts an arc length dimension to the selected arc - Inserts an arc length dimension to the selected arc + ჩასვამს რკალის სიგრძის განზომილებას მონიშნულ რკალში @@ -769,7 +769,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Oblique Chain Dimension - Oblique Chain Dimension + ჯაჭვის ირიბი განზომილება @@ -789,7 +789,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Oblique Coordinate Dimension - Oblique Coordinate Dimension + ირიბი კოორდინატების განზომილება @@ -809,7 +809,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Vertical Chain Dimension - Vertical Chain Dimension + ვერტიკალური ჯაჭვის განზომილება @@ -833,7 +833,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Vertical Chamfer Dimension - Vertical Chamfer Dimension + ვერტიკალური კუთხის ნაზოლის განზომილება @@ -853,7 +853,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Vertical Coordinate Dimension - Vertical Coordinate Dimension + ვერტიკალური კოორდინატის განზომილება @@ -897,7 +897,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Decreases the number of decimal places of the dimension - Decreases the number of decimal places of the dimension + ამცირებს განზომილების ციფრების რაოდენობას მძიმის შემდეგ @@ -910,7 +910,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic 1 Point Circle - Cosmetic 1 Point Circle + დამხმარე 1 წერტილი წრეწირი @@ -953,7 +953,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic 2 Point Circle - Cosmetic 2 Point Circle + დამხმარე 2 წერტილი წრეწირი @@ -983,7 +983,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic 3 Point Circle - Cosmetic 3 Point Circle + დამხმარე 3 წერტილი წრეწირი @@ -1017,7 +1017,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Bolt Circle Centerlines - Bolt Circle Centerlines + ხრახნის წრის ცენტრის ხაზები @@ -1047,7 +1047,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Increases the number of decimal places of the dimension - Increases the number of decimal places of the dimension + ზრდის განზომილების ციფრების რაოდენობას მძიმის შემდეგ @@ -1065,7 +1065,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Increases the number of decimal places of the dimension - Increases the number of decimal places of the dimension + ზრდის განზომილების ციფრების რაოდენობას მძიმის შემდეგ @@ -1136,7 +1136,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Parallel Line - Cosmetic Parallel Line + დამხმარე პარალელური ხაზი @@ -1155,12 +1155,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Parallel Line - Cosmetic Parallel Line + დამხმარე პარალელური ხაზი Adds a cosmetic circle to 3 selected vertices - Adds a cosmetic circle to 3 selected vertices + ამატებს დამხმარე წრეწირს 3 მონიშნულ წვეროს @@ -1179,7 +1179,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Perpendicular Line - Cosmetic Perpendicular Line + დამხმარე პერპენდიკულარული ხაზი @@ -1198,12 +1198,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Toggle View Lock - Toggle View Lock + ხედის დაბლოკვის გადართვა Locks or unlocks the position of the selected views - Locks or unlocks the position of the selected views + ჩაკეტავს ან განბლოკავს მონიშნული ხედების მდებარეობას @@ -1216,7 +1216,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Align Horizontal Chain Dimensions - Align Horizontal Chain Dimensions + ჰორიზონტალური ჯაჭვის განზომილების სწორება @@ -1234,7 +1234,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Align Chain Dimensions Horizontally - Align Chain Dimensions Horizontally + ჯაჭვის განზომილების ჰორიზონტალური სწორება @@ -1258,7 +1258,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Align Oblique Chain Dimensions - Align Oblique Chain Dimensions + ჯაჭვის ირიბი განზომილებების სწორება @@ -1282,7 +1282,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Align Chain Dimensions Vertically - Align Chain Dimensions Vertically + ჯაჭვის განზომილების ვერტიკალური სწორება @@ -1363,7 +1363,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Thread Bolt Bottom View - Cosmetic Thread Bolt Bottom View + დამხმარე კუთხვილის ხრახნის ქვედა ხედი @@ -1383,7 +1383,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Thread Bolt Side View - Cosmetic Thread Bolt Side View + დამხმარე კუთხვილის ხრახნის გვერდხედი @@ -1403,7 +1403,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Thread Hole Bottom View - Cosmetic Thread Hole Bottom View + დამხმარე კუთხვილის ხრახნის ნახვრეტის ქვედა ხედი @@ -1427,7 +1427,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Thread Hole Side View - Cosmetic Thread Hole Side View + დამატებითი კუთხვილის ნახვრეტის გვერდხედი @@ -1450,7 +1450,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Thread Hole Side View - Cosmetic Thread Hole Side View + დამატებითი კუთხვილის ნახვრეტის გვერდხედი @@ -1468,7 +1468,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Cosmetic Intersection Vertices - Cosmetic Intersection Vertices + კოსმეტიკური კვეთის წვეროები @@ -1479,29 +1479,29 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw ტექნიკური ნახაზი - + Extent Dimension - Extent Dimension + მასშტაბის განზომილება - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent - Horizontal extent + ჰორიზონტალური გაბარიტული ზომა - + Vertical extent - Vertical extent + ვერტიკალური მასშტაბი @@ -1514,12 +1514,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Centerline Between 2 Faces - Centerline Between 2 Faces + შუა ცენტრის ხაზის გავლება 2 სიბრტყეს შორის Adds a centerline to selected faces - Adds a centerline to selected faces + ამატებს ცენტრალურ ხაზს მონიშნულ სიბრტყეებს @@ -1532,12 +1532,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Geometric Hatch - Geometric Hatch + გეომეტრიული დაშტრიხვა Applies a geometric hatch pattern to the selected faces - Applies a geometric hatch pattern to the selected faces + გადაატარებს გეომეტრიულ დაშტრიხვის შაბლონს მონიშნულ სიბრტყეებს @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw ტექნიკური ნახაზი - + Horizontal Length Dimension - Horizontal Length Dimension + ჰორიზონტალური სიგრძის განზომილება - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw ტექნიკური ნახაზი - + Horizontal Extent Dimension - Horizontal Extent Dimension + ჰორიზონტალური სიგრძის განზომილება - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1609,17 +1609,17 @@ Left clicking on empty space will validate the current dimension. Right clicking Inserts a bitmap from a file into the current page - Inserts a bitmap from a file into the current page + ჩასვამს მიმდინარე გვერდში რასტრულ გამოსახულებას ფაილიდან Insert bitmap from a file into a page - Insert bitmap from a file into a page + გვერდში ფაილიდან რასტრული გამოსახულების ჩასმა Select an image file - Select an image file + აირჩიეთ გამოსახულების ფაილი @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking გამოსახულების ფაილები (*.jpg *.jpeg *.png *.bmp);;ყველა ფაილი (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - ტექნიკური ნახაზი - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1660,45 +1642,27 @@ Left clicking on empty space will validate the current dimension. Right clicking Adds a leader line - Adds a leader line + ამატებს გატანად ხაზს CmdTechDrawLengthDimension - + TechDraw ტექნიკური ნახაზი - + Length Dimension სიგრძის განზომილება - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - ტექნიკური ნახაზი - - - - Link Dimension to 3D Geometry - ზომის 3D გეომეტრიაზე მიბმა - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1709,7 +1673,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Midpoint Vertices - Midpoint Vertices + შუაწერტილის წვეროები @@ -1732,7 +1696,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Creates a new page with the default template - Creates a new page with the default template + ქმნის ახალ გვერდს ნაგულისხმევი შაბლონით @@ -1745,17 +1709,17 @@ Left clicking on empty space will validate the current dimension. Right clicking New Page From Template - New Page From Template + ახალი გვერდი შაბლონიდან Creates a new page from a custom template - Creates a new page from a custom template + ქმნის ახალ გვერდს მორგებული შაბლონიდან Select a template file - Select a template file + აირჩიეთ შაბლონის ფაილი @@ -1778,7 +1742,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Prints all pages with the print dialog - Prints all pages with the print dialog + დაბეჭდავს ყველა გვერდს ბეჭდვის დიალოგით @@ -1791,7 +1755,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Project Shape - Project Shape + პროექტის მოხაზულობა @@ -1827,7 +1791,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Quadrant Vertices - Quadrant Vertices + კვადრანტის წვეროები @@ -1838,19 +1802,19 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw ტექნიკური ნახაზი - + Radius Dimension რადიუსის განზომილება - + Inserts a radius dimension of a circular edge or arc - Inserts a radius dimension of a circular edge or arc + ჩასვამს წრიული წიბოს ან რკალის რადიუსის განზომილებას @@ -1868,7 +1832,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Redraws the current page - Redraws the current page + თავიდან დახაზავს მიმდინარე გვერდს @@ -1881,12 +1845,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Rich Text Annotation - Rich Text Annotation + ანოტაცია მდიდარი ტექსტით Inserts a rich text annotation in the current page - Inserts a rich text annotation in the current page + ჩასვამს მდიდრული ტექსტის ანოტაციას მიმდინარე გვერდში @@ -1899,7 +1863,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Section View (Simple or Complex) - Section View (Simple or Complex) + ჭრილის ხედი (მარტივი ან კომპლექსური) @@ -1914,7 +1878,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Complex Section View - Complex Section View + კომპლექსური ჭრილის ხედი @@ -1945,12 +1909,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Toggle Edge Visibility - Toggle Edge Visibility + წიბოს ხილვადობის გადართვა Toggles the visibility of the selected edges - Toggles the visibility of the selected edges + გადართავს მონიშნული წიბოების ხილვადობას @@ -1963,12 +1927,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Spreadsheet View - Spreadsheet View + ელცხრილის ხედი Inserts a view of a spreadsheet in the current page - Inserts a view of a spreadsheet in the current page + ჩასვამს ელცხრილის ხედს მიმდინარე გვერდში @@ -1986,7 +1950,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Moves the selected view to the bottom of the stack - Moves the selected view to the bottom of the stack + გადააქვს მონიშნული ხედი შეკვრის ბოლოში @@ -2004,7 +1968,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Moves the selected view down 1 level in the view stack - Moves the selected view down 1 level in the view stack + ჩამოიტანს მონიშნულ ხედს 1 დონით დაბლა ხედების შეკვრაში @@ -2017,12 +1981,12 @@ Left clicking on empty space will validate the current dimension. Right clicking View Stacking Order - View Stacking Order + შეკვრის მიმდევრობის ნახვა Adjusts the stacking order of the selected views - Adjusts the stacking order of the selected views + ასწორებს მონიშნული ხედების შეკვრის მიმდევრობას @@ -2060,7 +2024,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Moves the selected view to the top of the stack - Moves the selected view to the top of the stack + გადააქვს მონიშნული ხედი შეკვრის თავში @@ -2078,7 +2042,7 @@ Left clicking on empty space will validate the current dimension. Right clicking Moves the selected view up 1 level in the view stack - Moves the selected view up 1 level in the view stack + გადაიტანს მონიშნულ ხედს 1 დონით მაღლა ხედების შეკვრაში @@ -2091,12 +2055,12 @@ Left clicking on empty space will validate the current dimension. Right clicking Surface Finish Symbol - Surface Finish Symbol + ზედაპირის დასრულების სიმბოლოები Adds a surface finish symbol in the selected view - Adds a surface finish symbol in the selected view + ამატებს ზედაპირის საბოლოო დამუშავების სიმბოლოს მონიშნულ ხედში @@ -2114,23 +2078,23 @@ Left clicking on empty space will validate the current dimension. Right clicking Inserts a symbol from an SVG file - Inserts a symbol from an SVG file + ჩასვამს სიმბოლოს SVG ფაილიდან CmdTechDrawVerticalDimension - + TechDraw ტექნიკური ნახაზი - + Vertical Length Dimension - Vertical Length Dimension + ვერტიკალური სიგრძის განზომილება - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw ტექნიკური ნახაზი - + Vertical Extent Dimension - Vertical Extent Dimension + ვერტიკალური მასშტაბის განზომილება - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2188,7 +2152,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Adds welding information to the selected leader line - Adds welding information to the selected leader line + ამატებს შედუღების ინფორმაციას მონიშნულ გატანადი ხაზს @@ -2235,7 +2199,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Create projection group - Create projection group + პროექციის ჯგუფის შექმნა @@ -2266,12 +2230,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Add midpoint vertices - Add midpoint vertices + შუაწერტილის წვეროების დამატება Quadrant vertices - Quadrant vertices + კვადრანტის წვეროები @@ -2279,202 +2243,197 @@ If no object is selected, a file browser opens to select an SVG or image file.ანოტაციის შექმნა - + Add Extent dimension გაბარიტის განზომილების დამატება - - + + Add horizontal chain dimensions ჰორიზონტალური ჯაჭვის განზომილების დამატება - - + + Add horizontal coordinate dimensions ჰორიზონტალური კოორდინატების ზომების დამატება - - - + + + Add 3-points angle dimension 3-წერტილიანი კუთხის განზომილების დამატება - + Add horizontal chain dimension ჰორიზონტალური ჯაჭვის განზომილების დამატება - - - + + + Add length dimension სიგრძის განზომილების დამატება - + Add edge length dimension წიბოს სიგრძის განზომილების დამატება - + Insert dimension - Insert dimension + განზომილების ჩასმა - + Add area dimension - Add area dimension + ფართობის განზომილების დამატება - - - + + + Add distance dimension - Add distance dimension + მანძილის განზომილების დამატება - - - + + + Add distanceX chamfer dimension - Add distanceX chamfer dimension + X მანძილის კუთხის ნაზოლის განზომილების დამატება - + Add point to line distance dimension - Add point to line distance dimension + წერტილიდან ხაზამდე მანძილის განზომილების დამატება - - - - - - - - + + + + + + + + Add extent dimension - Add extent dimension + გაბარიტის განზომილების დამატება - + Add angle dimension - Add angle dimension + კუთხის განზომილების დამატება - + Add circle to line distance dimension - Add circle to line distance dimension + წრიდან ხაზამდე მანძილის განზომილების დამატება - + Add ellipse to line distance dimension - Add ellipse to line distance dimension + ოვალიდან ხაზამდე მანძილის განზომილების დამატება - - + + Add arc length dimension - Add arc length dimension + რკალის სიგრძის განზომილების დამატება - + Add circle to circle distance dimension - Add circle to circle distance dimension + წრიდან წრემდე მანძილის განზომილების დამატება - + Add ellipse to ellipse distance dimension - Add ellipse to ellipse distance dimension + ოვალიდან ოვალამდე მანძილის განზომილების დამატება - + Add radius dimension - Add radius dimension + რადიუსის განზომილების დამატება - + Add diameter dimension - Add diameter dimension + დიამეტრის განზომილების დამატება - + Add distanceX dimension - Add distanceX dimension + X მანძილის განზომილების დამატება - + Add distanceY chamfer dimension - Add distanceY chamfer dimension + Y მანძილის კუთხის ნაზოლის განზომილების დამატება - + Add distanceY dimension - Add distanceY dimension + Y მანძილის განზომილების დამატება - + Add distanceX extent dimension - Add distanceX extent dimension + X მანძილის ზომის განზომილების დამატება - + Add distanceY extent dimension - Add distanceY extent dimension + Y მანძილის ზომის განზომილების დამატება - + Add horizontal coord dimensions ჰორიზონტალური კოორდინატების ზომების დამატება - + Add vertical chain dimensions ვერტიკალური ჯაჭვის განზომილებების დამატება - + Add vertical coord dimensions ვერტიკალური კოორდინატის განზომილებების დამატება - + Add oblique chain dimensions ირიბი ჯაჭვის განზომილებების დამატება - + Add oblique coord dimensions ირიბი კოორდინატის განზომილებების დამატება - + Dimension ზომა - + Create Dimension DistanceX - Create Dimension DistanceX + X მანძილის განზომილების შექმნა - + Create Dimension DistanceY - Create Dimension DistanceY + Y მანძილის განზომილების შექმნა - - Create Dimension - ზომის მითითება - - - + Create dimension - Create dimension + განზომილების შექმნა @@ -2489,7 +2448,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Remove old hatch - Remove old hatch + ძველი დაშტრიხვის წაშლა @@ -2529,7 +2488,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Update Cosmetic Line - Update Cosmetic Line + კოსმეტიკური ხაზის განახლება @@ -2539,12 +2498,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Update Cosmetic Circle - Update Cosmetic Circle + დამხმარე წრეწირის განახლება Create Detail view - Create Detail view + დეტალური ხედის შექმნა @@ -2574,7 +2533,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Create Complex Section - Create Complex Section + კომპლექსური კვეთის შექმნა @@ -2605,77 +2564,77 @@ If no object is selected, a file browser opens to select an SVG or image file. Position Horizontal Chain Dimension - Position Horizontal Chain Dimension + ჯაჭვის ჰორიზონტალური განზომილების მოთავსება Position Vert Chain Dimension - Position Vert Chain Dimension + ვერტიკალური ჯაჭვის განზომილების მდებარეობა Position Oblique Chain Dimension - Position Oblique Chain Dimension + ჯაჭვის ირიბი განზომილების მოთავსება Cascade Horizontal Dimension - Cascade Horizontal Dimension + კასკადის ჰორიზონტალური განზომილება Cascade Vertical Dimension - Cascade Vertical Dimension + კასკადის ვერტიკალური განზომილება Cascade Oblique Dimension - Cascade Oblique Dimension + კასკადის ირიბი ზომა Create Horizontal Chain Dimension - Create Horizontal Chain Dimension + ჰორიზონტალური ჯაჭვის განზომილების შექმნა Create Vert Chain dimension - Create Vert Chain dimension + ვერტიკალური ჯაჭვის განზომილების შექმნა Create oblique chain dimension - Create oblique chain dimension + ჯაჭვის ირიბი განზომილების შექმნა Create Horizontal Coord Dimension - Create Horizontal Coord Dimension + ჰორიზონტალური კოოარდინატების განზომილების შექმნა Create vert coord dimension - Create vert coord dimension + ვერტიკალური კოორდინატის განზომილების შექმნა Create oblique coord dimension - Create oblique coord dimension + ირიბი კოორდინატების განზომილების შექმნა Create Horizontal Chamfer Dimension - Create Horizontal Chamfer Dimension + კუთხის ჰორიზონტალური ნაზოლის განზომილების შექმნა Create Vert Chamfer Dimension - Create Vert Chamfer Dimension + კუთხის ვერტიკალური ნაზოლის განზომილების შექმნა Create Arc Length Dimension - Create Arc Length Dimension + რკალის სიგრძის განზომილების შექმნა @@ -2720,47 +2679,47 @@ If no object is selected, a file browser opens to select an SVG or image file. TechDraw hole circle - TechDraw hole circle + ტექნიკური ნახაზის ნახვრეტის წრეწირი Bolt circle centerlines - Bolt circle centerlines + ხრახნის წრის ცენტრის ხაზები TechDraw circle centerlines - TechDraw circle centerlines + ტექნიკური ნახაზი წრეწირის ცენტრალური ხაზები Cosmetic thread hole bottom - Cosmetic thread hole bottom + დამხმარე კუთხვილის ხრახნის ნახვრეტის ძირი TechDraw change line attributes - TechDraw change line attributes + ტექნიკური ნახაზი ხაზის ატრიბუტების შეცვლა Change line attributes - Change line attributes + ხაზის ატრიბუტების შეცვლა TechDraw cosmetic intersection vertices - TechDraw cosmetic intersection vertices + ტექნიკური ნახაზი დამხმარე კვეთის წვეროები Cosmetic intersection vertices - Cosmetic intersection vertices + დამხმარე კვეთის წვეროები TechDraw cosmetic arc - TechDraw cosmetic arc + ტექნიკური ნახაზი დამხმარე რკალი @@ -2770,7 +2729,7 @@ If no object is selected, a file browser opens to select an SVG or image file. TechDraw cosmetic circle - TechDraw cosmetic circle + ტექნიკური ნახაზი დამხმარე წრეწირი @@ -2810,17 +2769,17 @@ If no object is selected, a file browser opens to select an SVG or image file. Extend/shorten line - Extend/shorten line + ხაზის გაგრძელება/შემოკლება TechDraw Calculate Selected Area - TechDraw Calculate Selected Area + ტექნიკური ნახაზი მონიშნული ფართობის გამოთვლა TechDraw Calculate Selected Arc Length - TechDraw Calculate Selected Arc Length + ტექნიკური ნახაზი მონიშნული რკალის სიგრძის გამოთვლა @@ -2855,12 +2814,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Create Weld Symbol - Create Weld Symbol + შედუღების ნიშნის შექმნა Edit Weld Symbol - Edit Weld Symbol + შედუღების ნიშნის შეცვლა @@ -2957,7 +2916,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Undo (Ctrl+Z) - Undo (Ctrl+Z) + გაუქმება (Ctrl+Z) @@ -2967,62 +2926,62 @@ If no object is selected, a file browser opens to select an SVG or image file. Copy (Ctrl+C) - Copy (Ctrl+C) + კოპირება (Ctrl+C) Paste (Ctrl+V) - Paste (Ctrl+V) + ჩასმა (Ctrl+V) Link (Ctrl+L) - Link (Ctrl+L) + მიბმა (Ctrl+L) Italic (Ctrl+I) - Italic (Ctrl+I) + კურსივი (Ctrl+I) Underline (Ctrl+U) - Underline (Ctrl+U) + ხაზგასმა (Ctrl+U) Strikethrough text - Strikethrough text + გადახაზული ტექსტი Bullet list (Ctrl+-) - Bullet list (Ctrl+-) + დანომრილი სია (Ctrl+-) Ordered list (Ctrl+=) - Ordered list (Ctrl+=) + დალაგებული სია (Ctrl+=) Decrease indentation (Ctrl+,) - Decrease indentation (Ctrl+,) + შეწევის შემცირება(Ctrl+,) Decrease Indentation - Decrease Indentation + შეწევის შემცირება Increase indentation (Ctrl+.) - Increase indentation (Ctrl+.) + შეწევის შემცირება(Ctrl+.) Increase Indentation - Increase Indentation + შეწევის გაზრდა @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3244,13 +3199,13 @@ If no object is selected, a file browser opens to select an SVG or image file. No break objects found in this selection - No break objects found in this selection + ამ მონიშნულში გაფუჭებული ობიექტები ვერ ვიპოვე No shapes, groups, or links in this selection - No shapes, groups, or links in this selection + მონიშნულში არც მონახაზებია, არც ჯგუფები და არც ბმულები @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3299,7 +3254,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Task in progress - Task in progress + მიმდინარეობს ამოცანის შესრულება @@ -3328,80 +3283,80 @@ If no object is selected, a file browser opens to select an SVG or image file. Close active task dialog and try again - Close active task dialog and try again + დახურეთ აქტიური ამოცანის ფანჯარა და თავიდან სცადეთ Select at least 1 DrawViewPart object as base - Select at least 1 DrawViewPart object as base + საბაზისოდ 1 DrawViewPart ობიექტი მაინც მონიშნეთ No base view selected - No base view selected + საბაზისო ხედი არჩეული არაა No base view, shapes, groups, or links in this selection - No base view, shapes, groups, or links in this selection + მონიშნულში არც საბაზისო ხედებია, არც მონახაზები, არც ჯგუფები და არც ბმულები - + Select an object first ჯერ აირჩიეთ ობიექტი - + Too many objects selected მონიშნულია მეტისმეტად ბევრი ობიექტი Create a page first - Create a page first + ჯერ შექმენით გვერდი No view of a part in selection - No view of a part in selection + მონიშნულში ნაწილის ხედი არ არსებობს Select one clip group and one view - Select one clip group and one view + მონიშნეთ ერთი კვეთების ჯგუფი და ერთი ხედი Select exactly one view to add to group - Select exactly one view to add to group + მონიშნეთ ზუსტად ერთი ხედი ჯგუფში ჩასამატებლად Select exactly one clip group - Select exactly one clip group + აირჩიეთ მხოლოდ ერთი კვეთების ჯგუფი Clip and view must be from same page - Clip and view must be from same page + კვეთი და ხედი ერთ გვერდზე უნდა იყვნენ Select exactly one view to remove from group - Select exactly one view to remove from group + მონიშნეთ ზუსტად ერთი ხედი ჯგუფიდან წასაშლელად View does not belong to a clip - View does not belong to a clip + ხედი არ მიეკუთვნება კვეთს Scalable vector graphic - Scalable vector graphic + მასშტაბირებადი ვექტორული გრაფიკა @@ -3411,32 +3366,32 @@ If no object is selected, a file browser opens to select an SVG or image file. Select at least one object - Select at least one object + ერთი ობიექტი მაინც მონიშნეთ Select only 1 BIM section plane - Select only 1 BIM section plane + მონიშნეთ, მხოლოდ, 1 BIM კვეთის სიბრტყე No BIM section plane in selection - No BIM section plane in selection + მონიშნულში BIM კვეთის სიბრტყე აღმოჩენილი არაა Select exactly one spreadsheet object - Select exactly one spreadsheet object + აირჩიეთ ელცხრილის ზუსტად ერთი ობიექტი No drawing page - No drawing page + ნახაზის გვერდის გარეშე Cannot export selection - Cannot export selection + მონიშნულის გატანა შეუძლებელია @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again - Close the active task dialog and try again + დახურეთ აქტიური ამოცანის ფანჯარა და თავიდან სცადეთ - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. - No view of a part in selection. + მონიშნულში ნაწილის ხედი არ არსებობს. - + Cannot make 2D extent dimension from selection - Cannot make 2D extent dimension from selection + მონიშნულიდან 2D ზომის განზომილებას ვერ შექმნით - + Cannot make 3D extent dimension from selection - Cannot make 3D extent dimension from selection + მონიშნულიდან 3D ზომის განზომილებას ვერ შექმნით - + There is no dimension in your selection - There is no dimension in your selection + თქვენს მონიშნულში განზომილებები არაა - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection - Cannot make 2D dimension from selection + მონიშნულიდან 2D განზომილებას ვერ შექმნით - + Cannot make 3D dimension from selection - Cannot make 3D dimension from selection + მონიშნულიდან 3D განზომილებას ვერ შექმნით - + Ellipse curve warning - Ellipse curve warning + ოვალის რკალის გაფრთხლება - + B-spline curve warning - B-spline curve warning + B-სპლაინის მრუდის გაფრთხილება - + B-spline curve error - B-spline curve error + B-სპლაინის მრუდის შეცდომა - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. ჯერ შექმენით გვერდი. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3554,26 +3494,21 @@ If no object is selected, a file browser opens to select an SVG or image file. You must select 2 vertices or 1 edge - You must select 2 vertices or 1 edge + უნდა მონიშნოთ 2 წვერო ან 1 წიბო - + Selected edge is an Ellipse. Value will be approximate. Continue? მონიშნული წიბო ოვალს წარმოადგენს. მნიშვნელობა, მხოლოდ, დაახლოებითი იქნება. გავაგრძელო? - + Selected edge is a B-spline. Value will be approximate. Continue? მონიშნული წიბო B-სპლაინს წარმოადგენს. მნიშვნელობა, მხოლოდ, დაახლოებითი იქნება. გავაგრძელო? - - There is no 3D object in your selection - თქვენს მონიშნულში 3D ობიექტი არ არსებობს - - - + Selection contains both 2D and 3D geometry მონიშნული, ორივე, 2D და 3D გეომეტრიებს შეიცავს @@ -3583,7 +3518,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Close the active task dialog and try again. - Close the active task dialog and try again. + დახურეთ აქტიური ამოცანის ფანჯარა და თავიდან სცადეთ. @@ -3594,7 +3529,7 @@ If no object is selected, a file browser opens to select an SVG or image file. TechDraw hole circle - TechDraw hole circle + ტექნიკური ნახაზის ნახვრეტის წრეწირი @@ -3610,12 +3545,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Selection is empty. - Selection is empty. + მონიშნული ცარიელია. You must select a base View for the circle. - You must select a base View for the circle. + უნდა აირჩიოთ წრეწირის საბაზისო ხედი. @@ -3625,27 +3560,27 @@ If no object is selected, a file browser opens to select an SVG or image file. Please select a center for the circle. - Please select a center for the circle. + აირჩიეთ ცენტრი წრეწირისთვის. No faces in selection - No faces in selection + მონიშნულში ზედაპირები არაა No edges in selection - No edges in selection + მონიშნულში წიბოები არაა TechDraw thread hole side - TechDraw thread hole side + ტექნიკური ნახაზის კუთხვილის ნახვრეტის გვერდი Select 2 straight lines - Select 2 straight lines + მონიშნეთ 2 სწორი ხაზი @@ -3666,7 +3601,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Cannot attach leader. No base view selected. - Cannot attach leader. No base view selected. + ძირითადის მიბმის შეცდომა. საბაზისო ხედი არაა არჩეული. @@ -3674,64 +3609,64 @@ If no object is selected, a file browser opens to select an SVG or image file. You must select a base view for the line - You must select a base view for the line + უნდა აირჩიოთ ხაზის საბაზისო ხედი No base view in selection - No base view in selection + მონიშნულშიი საბაზისო ხედი არაა You must select faces or an existing centerline - You must select faces or an existing centerline + უნდა მონიშნოთ ზედაპირები, ან არსებული ცენტრალური ხაზები No CenterLine in selection - No CenterLine in selection + მონიშნულში ცენტრის ხაზები არაა Selection is not a centerline - Selection is not a centerline + მონიშნული ცენტრის ხაზი არაა Selection is not a Centerline - Selection is not a Centerline + მონიშნული ცენტრის ხაზი არაა Selection not understood - Selection not understood + გაუგებარი მონიშვნა You must select 2 vertices or an existing centerline - You must select 2 vertices or an existing centerline + უნდა მონიშნოთ 2 წვერო, ან არსებული ცენტრის ხაზი Select 2 vertices or 1 centerline - Select 2 vertices or 1 centerline + აირჩიეთ 2 წვერი ან 1 ცენტრალური ხაზი Not enough points in the selection - Not enough points in the selection + მონიშნულში არასაკმარისი წერტილებია Selection is not a cosmetic line - Selection is not a cosmetic line + მონიშნული არ წარმოადგენს დამხმარე ხაზს You must select 2 vertices - You must select 2 vertices + უნდა მონიშნოთ 2 წვერო @@ -3752,22 +3687,22 @@ If no object is selected, a file browser opens to select an SVG or image file. You must select a view and/or lines - You must select a view and/or lines + უნდა აირჩიოთ ხედი და/ან ხაზები No view in selection - No view in selection + მონიშნულში ხედი არ არსებობს No part views in this selection - No part views in this selection + ამ მონიშნულში ნაწილის ხედები არ არსებობს Select exactly one leader line or one weld symbol - Select exactly one leader line or one weld symbol + მონიშნეთ ზუსტად ერთი გატანადი ხაზი, ან ერთი შედუღების სიმბოლო @@ -3782,7 +3717,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Replace hatch? - Replace hatch? + შევცვალო დაშტრიხვა? @@ -3792,7 +3727,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Select a face first - Select a face first + ჯერ აირჩიეთ ზედაპირი @@ -3802,13 +3737,13 @@ If no object is selected, a file browser opens to select an SVG or image file. Create a page to insert - Create a page to insert + ჩასასმელი გვერდის შექმნა No faces to hatch in this selection - No faces to hatch in this selection + მონიშნულებში დასაშტრიხი ზედაპირები აღმოჩენილი არაა @@ -3823,12 +3758,12 @@ If no object is selected, a file browser opens to select an SVG or image file. No page selected - No page selected + გვერდი მონიშნული არაა This function needs a page. - This function needs a page. + ამ ფუნქციას გვერდი სჭირდება. @@ -3844,7 +3779,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Export Page as PDF - Export Page as PDF + გვერდის PDF ფაილად გატანა @@ -3860,12 +3795,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Export page as DXF - Export page as DXF + გვერდის DXF ფაილად გატანა Export page as PDF - Export page as PDF + გვერდის PDF ფაილად გატანა @@ -3913,7 +3848,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Insert Active View - Insert Active View + აქტიური ხედის ჩასმა @@ -3965,12 +3900,12 @@ If no object is selected, a file browser opens to select an SVG or image file. Possible coordinate system error - Possible coordinate system error + შესაძლო კოორდინატების სისტემის შეცდომა Check SectionNormal, Direction and/or XDirection. - Check SectionNormal, Direction and/or XDirection. + შეამოწმეთ SectionNormal, Direction ან/და XDirection. @@ -4017,7 +3952,7 @@ If no object is selected, a file browser opens to select an SVG or image file. TechDraw Insert Prefix - TechDraw Insert Prefix + ტექნიკური ნახაზი პრეფიქსის ჩასმა @@ -4027,7 +3962,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Insert Prefix - Insert Prefix + პრეფიქსის ჩასმა @@ -4106,17 +4041,17 @@ If no object is selected, a file browser opens to select an SVG or image file. TechDraw Create Horizontal Coordinate Dimension - TechDraw Create Horizontal Coordinate Dimension + ტექნიკური ნახაზი ჰორიზონტალური კოორდინატული განზომილების შექმნა TechDraw Create Vertical Coord dimension - TechDraw Create Vertical Coord dimension + ტექნიკური ნახაზი ვერტიკალური კოორდინატის განზომილების შექმნა No sub-elements selected - No sub-elements selected + ქვეელემენტები არჩეული არაა @@ -4171,17 +4106,17 @@ If no object is selected, a file browser opens to select an SVG or image file. Dimension not found. Was it deleted? Cannot continue. - Dimension not found. Was it deleted? Cannot continue. + განზომილება ვერ ვიპოვე. წაგეშალათ? გაგრძელება შეუძლებელია. Select 2 vertices or 1 edge - Select 2 vertices or 1 edge + აირჩიეთ 2 წვერო ან 1 წიბო Select a line group - Select a line group + აირჩიეთ წერტილების ჯგუფი @@ -4247,7 +4182,7 @@ If no object is selected, a file browser opens to select an SVG or image file. Incorrect Selection? - Incorrect Selection? + არასწორი არჩევანი? @@ -4258,16 +4193,16 @@ If no object is selected, a file browser opens to select an SVG or image file. Cannot make dimension from selection - Cannot make dimension from selection + მონიშნულიდან განზომილებას ვერ შექმნით + - TechDraw ტექნიკური ნახაზი @@ -4304,12 +4239,12 @@ If no object is selected, a file browser opens to select an SVG or image file. No part view in selection - No part view in selection + მონიშნულში ნაწილის ხედი არ არსებობს No %1 in selection - No %1 in selection + მონიშნულში %1 არ არსებობს @@ -4319,22 +4254,22 @@ If no object is selected, a file browser opens to select an SVG or image file. Edit Centerline - Edit Centerline + ცენტრალურ ხაზის ჩასწორება Rich Text Editor - Rich Text Editor + მდიდარი ტექსტის რედაქტორი Rich Text Creator - Rich Text Creator + მდიდარი ტექსტის შემქმნელი Click to update text - Click to update text + ტექსტის განახლებისთვის დააწკაპუნეთ @@ -4349,7 +4284,7 @@ it has a weld symbol that would become broken. Close open dialog before deleting detail object - Close open dialog before deleting detail object + დახურეთ ღია დიალოგი ნაწილის ობიექტის წაშლამდე @@ -4435,7 +4370,7 @@ it has a tile weld that would become broken. Crops captured image to this width - Crops captured image to this width + ამოჭრის გადაღებულ გამოსახულებას ამ სიგანეზე @@ -4445,32 +4380,32 @@ it has a tile weld that would become broken. Crop to height - Crop to height + სიმაღლეზე ამოჭრა Use 3D background - Use 3D background + 3D ფონის გამოყენება Crops captured image to this height - Crops captured image to this height + ამოჭრის გადაღებულ გამოსახულებას ამ სიმაღლეზე Solid background - Solid background + მყარი ფონი No background - No background + ფონის გარეშე Crop to width - Crop to width + სიგანეზე ამოჭრა @@ -4623,7 +4558,7 @@ at the kink in the leader line Symbol directory - Symbol directory + სიმბოლოების კატალოგი @@ -4663,7 +4598,7 @@ This directory will be used for the symbol selection. Select a page that should be used - Select a page that should be used + აირჩიეთ გამოსაყენებელი გვერდი @@ -4677,22 +4612,22 @@ This directory will be used for the symbol selection. Switch workbench on click - Switch workbench on click + სამუშაო მაგიდის გადართვა დაწკაპუნებისას Dump intermediate results during section view processing - Dump intermediate results during section view processing + შუალედური შედეგების გამოტანა კვეთის ხედის დამუშავებისას Debug section - Debug section + გამართვის სექცია Edge fuzz - Edge fuzz + მონიშვნის არეალის ზომა წიბოსთან ახლოს @@ -4702,12 +4637,12 @@ This directory will be used for the symbol selection. Use new face finder algorithm - Use new face finder algorithm + ზედაპირის მომძებნის ახალი ალგორითმის გამოყენება Dump intermediate results during detail view processing - Dump intermediate results during detail view processing + შუალედური შედეგების გამოტანა ნაწილის ხედის დამუშავებისას @@ -4733,22 +4668,22 @@ can be a performance penalty in complex models. Validate shapes - Validate shapes + მოხაზულობების გადამოწმება Allow crazy edges - Allow crazy edges + უაზრო წიბოების დაშვება Issue progress messages while building view geometry - Issue progress messages while building view geometry + ხედის გეომეტრიის აგებისას მიმდინარეობის შესახებ შეტყობინებების გამოტანა Report progress - Report progress + ანგარიშის მიმდინარეობა @@ -4758,22 +4693,22 @@ can be a performance penalty in complex models. Overlap edges scrub passes - Overlap edges scrub passes + HLR ალგორითმის მიერ დაბრუნებული გადაფარვადი წიბოების წაშლა Mark fuzz - Mark fuzz + შერჩევის არეალის ზომა ცენტრის ნიშნებთან ახლოს Max SVG hatch tiles - Max SVG hatch tiles + SVG დაშტრიხვის ფრაგმენტების მაქს. რაოდენობა Debug bad shape - Debug bad shape + ცუდი მოხაზულობის გამართვა @@ -4783,7 +4718,7 @@ can be a performance penalty in complex models. Fuse before section - Fuse before section + შეერთება კვეთის წინ @@ -4795,12 +4730,12 @@ Each unit is approximately 0.1mm wide Show section edges - Show section edges + კვეთის წიბოების ჩვენება Maximum PAT hatch segments - Maximum PAT hatch segments + მაქს. PAT დაშტრიხვის სეგმენტები @@ -4844,7 +4779,7 @@ Increase the limit if necessary. Auto-correct dimension references - Auto-correct dimension references + განზომილების მიმართვის ავტოგასწორება @@ -4944,12 +4879,12 @@ PAT შაბლონით წიბოს დაშტრიხვისა Print center marks - Print center marks + ცენტრის ნიშნების დაბეჭდვა Show center marks - Show center marks + ცენტრის ნიშნების ჩვენება @@ -4959,7 +4894,7 @@ PAT შაბლონით წიბოს დაშტრიხვისა Show section line in source view - Show section line in source view + სექციის ხაზის ჩვენება წყარო ხედში @@ -4969,22 +4904,22 @@ PAT შაბლონით წიბოს დაშტრიხვისა Include cut line in section annotation - Include cut line in section annotation + ამოჭრის ხაზის ჩასმა სექციის ანოტაციაში Length of horizontal portion of balloon leader - Length of horizontal portion of balloon leader + ოვალური სქოლიოს ჰორიზონტალური ნაწილის სიგრძე Balloon leader kink length - Balloon leader kink length + ბუშტის სქოლიოს მოღუნვის სიგრძე Broken view break type - Broken view break type + გაფუჭებული ხედის გაყოფის ტიპი @@ -4994,7 +4929,7 @@ PAT შაბლონით წიბოს დაშტრიხვისა Balloon orthogonal triangle - Balloon orthogonal triangle + სქოლიოს ორთოგონალური სამკუთხედი @@ -5009,7 +4944,7 @@ PAT შაბლონით წიბოს დაშტრიხვისა Solid color - Solid color + მყარი ფერი @@ -5024,12 +4959,12 @@ PAT შაბლონით წიბოს დაშტრიხვისა Displays the outline around a detail view - Displays the outline around a detail view + აჩვენებს გარემოხაზულობას დეტალური ხედის გარშემო Detail view show matting - Detail view show matting + დეტალის ხედი შესაბამისობას აჩვენებს @@ -5039,27 +4974,27 @@ PAT შაბლონით წიბოს დაშტრიხვისა Detail source show highlight - Detail source show highlight + ნაწილის წყაროს გამოკვეთის ჩვენება Detail view outline shape - Detail view outline shape + გარემოხაზულობის მოხაზულობის დეტალური ხედი Leader line auto horizontal - Leader line auto horizontal + გატანადი ხაზის ავტომატური ჰორიზონტალურობა Balloon leader end - Balloon leader end + სქოლიოს ისრის ბოლოს ფორმა No break lines - No break lines + გაყოფის ხაზების გარეშე @@ -5074,37 +5009,37 @@ PAT შაბლონით წიბოს დაშტრიხვისა Balloon shape - Balloon shape + სქოლიოს ფორმა Section cut surface - Section cut surface + ზედაპირის კვეთა Line width group - Line width group + ხაზის სიგანეების ჯგუფი Line end cap shape - Line end cap shape + ხაზის ბოლოების გარეგნული ფორმა Hidden line style - Hidden line style + დამალული ხაზების სტილი Break line style - Break line style + გაყოფის ხაზის სტილი Style of line to be used in broken view. - Style of line to be used in broken view. + გაფუწებულ ხედში გამოყენებული ხაზის სტილი. @@ -5134,7 +5069,7 @@ PAT შაბლონით წიბოს დაშტრიხვისა Complex section line marks - Complex section line marks + კომპლექსური კვეთის ხაზის ნიშნულები @@ -5144,27 +5079,27 @@ PAT შაბლონით წიბოს დაშტრიხვისა Enforce ISO 8601 date format - Enforce ISO 8601 date format + ISO 8691 თარიღის ფორმატის ნაძალადევი გამოყენება Center line style - Center line style + ცენტრალური ხაზის სტილი Detail highlight style - Detail highlight style + ნაწილის გამოკვეთის სტილი Section line style - Section line style + კვეთის ხაზის სტილი Line standard - Line standard + ხაზის სტანდარტი @@ -5249,7 +5184,7 @@ for using drawings a 1:1 cutting guide. Hidden line - Hidden line + დამალული ხაზი @@ -5304,12 +5239,12 @@ for using drawings a 1:1 cutting guide. Geometric hatch - Geometric hatch + გეომეტრიული დაშტრიხვა Use a single colour for all text and lines - Use a single colour for all text and lines + ერთი ფერის გამოყენება ყველა ტექსტისთვის და ხაზისთვის @@ -5324,12 +5259,12 @@ for using drawings a 1:1 cutting guide. Leader line - Leader line + გატანადი ხაზი Color of dimension lines and text - Color of dimension lines and text + განზომილების ხაზების და ტექსტის ფერი @@ -5339,7 +5274,7 @@ for using drawings a 1:1 cutting guide. Detail highlight - Detail highlight + დეტალების გამოკვეთა @@ -5349,7 +5284,7 @@ for using drawings a 1:1 cutting guide. Template underline - Template underline + შაბლონის ხაზგასმა @@ -5384,7 +5319,7 @@ for using drawings a 1:1 cutting guide. Section line - Section line + ხაზის ჭრილი @@ -5409,7 +5344,7 @@ for using drawings a 1:1 cutting guide. Transparent faces - Transparent faces + გამჭვირვალე ზედაპირები @@ -5498,22 +5433,22 @@ for using drawings a 1:1 cutting guide. Dimension format - Dimension format + განზომილების ფორმატი Diameter symbol - Diameter symbol + დიამეტრის ნიშანი ISO oriented - ISO oriented + ISO გასწორებული ISO referencing - ISO referencing + ISO მიმართვა @@ -5523,7 +5458,7 @@ for using drawings a 1:1 cutting guide. ASME referencing - ASME referencing + ASME მიმართვა @@ -5538,7 +5473,7 @@ for using drawings a 1:1 cutting guide. Standard and style - Standard and style + სტანდარტი და სტილი @@ -5548,19 +5483,19 @@ for using drawings a 1:1 cutting guide. Arrow style - Arrow style + ისრის სტილი Tolerance text scale Multiplier of 'Font size' - Tolerance text scale -Multiplier of 'Font size' + ტექსტის მასშტაბის დაშვება +'ფონტის ზომის' ნამრავლი Tolerance text scale - Tolerance text scale + სიზუსტის ტექსტის მასშტაბი @@ -5570,12 +5505,12 @@ Multiplier of 'Font size' Use global decimals - Use global decimals + მძიმის შემდეგ არსებული ციფრების რაოდენობის გლობალური პარამეტრებიდან აღება Alternate decimals - Alternate decimals + მძიმის შემდეგ ციფრების რაოდენობა @@ -5585,7 +5520,7 @@ Multiplier of 'Font size' Extension gap factor - ISO - Extension gap factor - ISO + გაფართოების გაწელვის ფაქტორი - ISO @@ -5600,7 +5535,7 @@ Multiplier of 'Font size' Extension gap factor - ASME - Extension gap factor - ASME + გაფართოების გაწელვის ფაქტორი - ASME @@ -5621,7 +5556,7 @@ Multiplier of 'Font size' Line spacing - ISO - Line spacing - ISO + ხაზების დაშორება - ISO @@ -5633,7 +5568,7 @@ Multiplier of 'Font size' Dimensioning tools - Dimensioning tools + განზომილების ხელსაწყოები @@ -5795,7 +5730,7 @@ for ProjectionGroups Update with 3D (global policy) - Update with 3D (global policy) + განახლება 3D-ით (გლობალური პოლიტიკა) @@ -5807,17 +5742,17 @@ can override the global 'Update with 3D' parameter Allow page override (global policy) - Allow page override (global policy) + გვერდის გადაფარვის დაშვება (გლობალური პოლიტიკა) Keep page up to date - Keep page up to date + გვერდის ავტომატური განახლება Auto-distribute secondary views - Auto-distribute secondary views + მეორადი ხედების ავტომატური განაწილება @@ -5829,17 +5764,17 @@ can override the global 'Update with 3D' parameter Label font* - Label font* + ჭდეების ფონტი* Projection group angle - Projection group angle + პროექციის ჯგუფის კუთხე Use first or third-angle multiview projection convention - Use first or third-angle multiview projection convention + პირველი ან მესამე კუთხის ხედის პროექციის გამოყენება @@ -5854,7 +5789,7 @@ can override the global 'Update with 3D' parameter Section line convention - Section line convention + კვეთის ხაზის შეთანხმება @@ -5869,7 +5804,7 @@ can override the global 'Update with 3D' parameter Welding directory - Welding directory + შედუღების აღმნიშვნელი ხატულების კატალოგი @@ -5879,7 +5814,7 @@ can override the global 'Update with 3D' parameter Template directory - Template directory + შაბლონების საქაღალდე @@ -5889,22 +5824,22 @@ can override the global 'Update with 3D' parameter Hatch pattern file - Hatch pattern file + დაშტრიხვის შაბლონის ფაილი Default template - Default template + ნაგულისხმევი შაბლონი Symbol directory - Symbol directory + სიმბოლოების კატალოგი Set 'Show grid' property to true on new pages - Set 'Show grid' property to true on new pages + აყენებს 'ბადის ჩვენების' თვისებას ჭეშმარიტზე ახალი გვერდდებისთვის @@ -5919,12 +5854,12 @@ can override the global 'Update with 3D' parameter Distance between page grid lines - Distance between page grid lines + მანძილი გვერდის ბადის ხაზებს შორის Enable multi-selection mode - Enable multi-selection mode + ერთზე მეტი მონიშვნის რეჟიმის ჩართვა @@ -5934,22 +5869,22 @@ can override the global 'Update with 3D' parameter Use 3D camera direction - Use 3D camera direction + 3D კამერის მიმართულების გამოყენება Displays view labels even when frames are suppressed - Displays view labels even when frames are suppressed + აჩვენებს ხედის ჭდეებს მაშინაც კი, როცა ჩარჩოები გამორთულია Snaps views into alignment when being dragged - Snaps views into alignment when being dragged + მიამაგრებს ხედებს სწორებას, გადათრევისას Snap view alignment - Snap view alignment + მიმაგრების ხედის სწორება @@ -5959,7 +5894,7 @@ can override the global 'Update with 3D' parameter Snap detail highlights - Snap detail highlights + ნაწილის გამოკვეთების მიბმა @@ -5969,7 +5904,7 @@ can override the global 'Update with 3D' parameter Line group file - Line group file + ხაზების ჯგუფის ფაილი @@ -6014,12 +5949,12 @@ can override the global 'Update with 3D' parameter View snapping factor - View snapping factor + ხედის მიმაგრების კოეფიციენტი Highlight snapping factor - Highlight snapping factor + მიმაგრების კოეფიციენტის გამოკვეთა @@ -6054,64 +5989,64 @@ Fast, but result is a collection of short straight lines. Use polygon approximation - Use polygon approximation + მრავალკუთხედი აპროქსიმაციის გამოყენება Shows hard and outline edges (always shown) - Shows hard and outline edges (always shown) + აჩვენებს მყარ და გარემოხაზულობის წიბოებს (ყოველთვის ნაჩვენებია) Show hard lines - Show hard lines + მყარი ხაზების ჩვენება Shows hidden hard and outline edges - Shows hidden hard and outline edges + აჩვენებს დამალულ მყარ და გარემოხაზულობის წიბოებს Shows smooth lines - Shows smooth lines + აჩვენებს გლუვ ხაზებს Shows hidden smooth edges - Shows hidden smooth edges + აჩვენებს დამალულ მოგლუვებულ წიბოებს Shows seam lines - Shows seam lines + გაკერვის ხაზების ჩვენება Shows hidden seam lines - Shows hidden seam lines + აჩვენებს ნაკერის დამალული ხაზებს Makes lines of equal parameterization - Makes lines of equal parameterization + ქმნის თანაბარი პარამეტრიზაციის ხაზებს Show UV ISO lines - Show UV ISO lines + UV ISO ხაზების ჩვენება Shows hidden equal parameterization lines - Shows hidden equal parameterization lines + აჩვენებს დამალული ტოლი პარამეტრიზაციის ხაზებს ISO count - ISO count + იზოპარამეტრული ხაზების რაოდენობა @@ -6167,7 +6102,7 @@ Fast, but result is a collection of short straight lines. View custom scale - View custom scale + მომხმარებლის მიერ მითითებული მასშტაბი @@ -6197,7 +6132,7 @@ Fast, but result is a collection of short straight lines. View scale type - View scale type + ხედის მასშტაბის ტიპი @@ -6207,12 +6142,12 @@ Fast, but result is a collection of short straight lines. Legacy symbol scaling - Legacy symbol scaling + მოძველებულობის სიმბოლოს მასშტაბი Size adjustments - Size adjustments + ზომების მორგება @@ -6222,17 +6157,17 @@ Fast, but result is a collection of short straight lines. Center mark scale - Center mark scale + ცენტრის ნიშნის მასშტაბი Template edit mark - Template edit mark + შაბლონის ჩასწორების ნიშანი Welding symbol scale - Welding symbol scale + შედუღების ნიშნის მასშტაბი @@ -6332,12 +6267,12 @@ Do you want to continue? Symbol directory - Symbol directory + სიმბოლოების კატალოგი Directory to welding symbols - Directory to welding symbols + შედუღების სიმბოლოების საქაღალდე @@ -6355,7 +6290,7 @@ Do you want to continue? Color for text - Color for text + ფერი ტექსტისთვის @@ -6365,7 +6300,7 @@ Do you want to continue? Font size for text - Font size for text + ფონტის ზომა ტექსტისთვის @@ -6415,27 +6350,27 @@ Do you want to continue? Shape scale - Shape scale + მოხაზულობის მასშტაბი End symbol - End symbol + ბოლო სიმბოლო End symbol scale - End symbol scale + ბოლოს სიმბოლოს მასშტაბი Line visible - Line visible + ხაზის ხილულია Controls whether the leader line is visible or not - Controls whether the leader line is visible or not + აკონტროლებს, ჩანს თუ არა გატანადი ხაზი @@ -6445,7 +6380,7 @@ Do you want to continue? Leader kink length - Leader kink length + გატანადი რკალის სიგრძე @@ -6465,7 +6400,7 @@ Do you want to continue? Bubble shape - Bubble shape + სქოლიოს ფორმა @@ -6558,12 +6493,12 @@ Do you want to continue? Top to bottom line - Top to bottom line + ხაზი ზემოდან ქვემოთ Left to right line - Left to right line + ხაზი მარცხნიდან მარჯვნივ @@ -6591,22 +6526,22 @@ Do you want to continue? Shift horizontal - Shift horizontal + ჰორიზონტალური წანაცვლება Move line +up or -down - Move line +up or -down + ხაზის +მაღლა ან -დაბლა გადატანა Move line -left or +right - Move line -left or +right + ხაზის -მარცხნივ ან +მარჯვნივ გაწევა Shift vertical - Shift vertical + ვერტიკალური წანაცვლება @@ -6680,12 +6615,12 @@ Do you want to continue? Projection strategy - Projection strategy + პროექციის სტრატეგია No parallel - No parallel + არაპარალელური @@ -6695,32 +6630,32 @@ Do you want to continue? Preset view direction looking up - Preset view direction looking up + პრესეტის ხედის მიმართულება მაღლა იყურება Preset view direction looking down - Preset view direction looking down + პრესეტის ხედის მიმართულება დაბლა იყურება Preset view direction looking left - Preset view direction looking left + პრესეტის ხედის მიმართულება მარცხნივ იყურება Preset view direction looking right - Preset view direction looking right + პრესეტის ხედის მიმართულება მარჯვნივ იყურება Check to update display after every property change - Check to update display after every property change + ჩართეთ თვისების ყოველი ცვლილების შემდეგ ეკრანის განახლებისთვის Rebuild display now. May be slow for complex models - Rebuild display now. May be slow for complex models + ეკრანის განახლება ახლავე მოხდება. კომპლექსური მოდელებისთვის შეიძლება შენელდეს @@ -6940,22 +6875,22 @@ Do you want to continue? Derived geometry element - Derived geometry element + მიღებული გეომეტრიული ელემენტი Least inscribed geometry element - Least inscribed geometry element + ყველაზე იშვიათად ჩაწერილი გეომეტრიული ელემენტი Unequal bilateral - Unequal bilateral + არათანაბარი ორმხრივი Most inscribed geometry element - Most inscribed geometry element + ყველაზე ხშირად ჩაწერილი გეომეტრიული ელემენტი @@ -6980,7 +6915,7 @@ Do you want to continue? Greek letters - Greek letters + ბერძნული ასოები @@ -6995,17 +6930,17 @@ Do you want to continue? Circular run-out - Circular run-out + წრიული გამოსვლა Total run-out - Total run-out + ჯამური გადაცილება Minimax (Chebychev) - Minimax (Chebychev) + მინიმაქსი (ჩებიშევი) @@ -7204,7 +7139,7 @@ Do you want to continue? Detail view - Detail view + დეტალური ხედი @@ -7219,17 +7154,17 @@ Do you want to continue? Reference label - Reference label + მიმართვის ჭდე Scale factor for detail view - Scale factor for detail view + ნაწილის ხედის მასშტაბის კოეფიციენტი Y-position of detail highlight within view - Y-position of detail highlight within view + ხედზე დეტალის გამოკვეთის Y მდებარეობა @@ -7239,12 +7174,12 @@ Do you want to continue? Size of detail view - Size of detail view + ნაწილის ხედის ზომა X position of detail highlight within view - X position of detail highlight within view + ხედზე დეტალის გამოკვეთის X მდებარეობა @@ -7338,22 +7273,22 @@ Custom: custom scale factor is used If theoretically exact (basic) dimension - If theoretically exact (basic) dimension + თუ თეორიული ზუსტი (საბაზისო) განზომილება Theoretically exact - Theoretically exact + თეორიულად ზუსტად Equal tolerance - Equal tolerance + ტოლი სიზუსტე Overtolerance - Overtolerance + აცდენის ზედა ზღვარი @@ -7367,7 +7302,7 @@ the negated value for 'Undertolerance'. Undertolerance - Undertolerance + აცდენის ქვედა ზღვარი @@ -7381,7 +7316,7 @@ by negative value of 'Overtolerance'. Format specifier - Format specifier + ფორმატის მიმთითებელი @@ -7391,17 +7326,17 @@ by negative value of 'Overtolerance'. Arbitrary text - Arbitrary text + პირობითი ტექსტი Overtolerance format specifier - Overtolerance format specifier + ზეტოლერანტობის ფორმატის მიმთითებელი Undertolerance format specifier - Undertolerance format specifier + ქვეტოლერანტობის ფორმატის მიმთითებელი @@ -7411,12 +7346,12 @@ by negative value of 'Overtolerance'. Arbitrary tolerance text - Arbitrary tolerance text + შემთხვევითი გადახრის ტექსტი Flip arrowheads - Flip arrowheads + ზომის ისრების ამობრუნება @@ -7431,22 +7366,22 @@ by negative value of 'Overtolerance'. Font size for text - Font size for text + ფონტის ზომა ტექსტისთვის Drawing style - Drawing style + ხატვის სტილი ISO oriented - ISO oriented + ISO გასწორებული ISO referencing - ISO referencing + ISO მიმართვა @@ -7456,7 +7391,7 @@ by negative value of 'Overtolerance'. ASME referencing - ASME referencing + ASME მიმართვა @@ -7486,7 +7421,7 @@ by negative value of 'Overtolerance'. Set dimension line angle to default (orthographic view) - Set dimension line angle to default (orthographic view) + განზომილების ხაზის კუთხის ნაგულისხმევზე დაყენება (ორთოგრაფიული ხედი) @@ -7508,7 +7443,7 @@ by negative value of 'Overtolerance'. Set extension line angle to default (orthographic) - Set extension line angle to default (orthographic) + გაგრძელების ხაზის კუთხის ნაგულისხმევზე დაყენება (ორთოგრაფიული) @@ -7536,12 +7471,12 @@ by negative value of 'Overtolerance'. Geometric Hatch - Geometric Hatch + გეომეტრიული დაშტრიხვა Define Pattern - Define Pattern + აღწერეთ ნიმუში @@ -7551,7 +7486,7 @@ by negative value of 'Overtolerance'. The PAT file containing the pattern - The PAT file containing the pattern + PAT ფაილი, რომელიც შაბლონს შეიცავს @@ -7581,7 +7516,7 @@ by negative value of 'Overtolerance'. Thickness of the lines within the pattern - Thickness of the lines within the pattern + ხაზების სისქე ამ შაბლონში @@ -7609,12 +7544,12 @@ by negative value of 'Overtolerance'. Apply Geometric Hatch - Apply Geometric Hatch + გეომეტრიული დაშტრიხვის გადატარება Select an SVG or bitmap file - Select an SVG or bitmap file + აირჩიეთ SVG ან რასტრული ფაილი @@ -7624,7 +7559,7 @@ by negative value of 'Overtolerance'. Choose an SVG or bitmap file as a pattern - Choose an SVG or bitmap file as a pattern + აირჩიეთ შაბლონად SVG ან რასტრული ფაილი @@ -7634,12 +7569,12 @@ by negative value of 'Overtolerance'. Enlarges/shrinks the pattern (SVG only) - Enlarges/shrinks the pattern (SVG only) + ადიდებს/აპატარავებს შაბლონს (მხოლოდ SVG) SVG line color - SVG line color + SVG-ის ხაზის ფერი @@ -7649,17 +7584,17 @@ by negative value of 'Overtolerance'. Color of pattern lines (SVG only) - Color of pattern lines (SVG only) + შაბლონის ხაზების ფერი (მხოლოდ SVG) Rotate the pattern (degrees) - Rotate the pattern (degrees) + შაბლონის შებრუნება (გრადუსი) SVG pattern scale - SVG pattern scale + SVG შაბლონის მასშტაბი @@ -7706,12 +7641,12 @@ You can pick further points to get line segments. Start symbol - Start symbol + საწყისი სიმბოლო End symbol - End symbol + ბოლო სიმბოლო @@ -7846,7 +7781,7 @@ You can pick further points to get line segments. Thickness of pattern lines - Thickness of pattern lines + შაბლონის ხაზების სისქე @@ -7894,32 +7829,32 @@ You can pick further points to get line segments. Link this 3D geometry - Link this 3D geometry + ამის მიბმა 3D გეომეტრიაზე Feature1 - Feature1 + თვისება1 Geometry1 - Geometry1 + გეომეტრია1 Feature2 - Feature2 + თვისება2 Geometry2 - Geometry2 + გეომეტრია2 To these dimensions - To these dimensions + ამ განზომილებებამდე @@ -7942,12 +7877,12 @@ You can pick further points to get line segments. Scale numerator - Scale numerator + მასშტაბის მრიცხველი Scale denominator - Scale denominator + მასშტაბის მნიშვნელი @@ -8013,17 +7948,17 @@ You can pick further points to get line segments. Spin clockwise - Spin clockwise + ბრუნვა საათი ისრის მიმართულებით Spin counter-clockwise - Spin counter-clockwise + ბრუნვა საათის ისრის საწინააღმდეგოდ Sets the document front view as primary direction - Sets the document front view as primary direction + დააყენებს დოკუმენტის წინა ხედს ძირითად მიმართულებად @@ -8097,7 +8032,7 @@ You can pick further points to get line segments. First or third angle - First or third angle + პირველი ან მესამე კუთხე @@ -8119,7 +8054,7 @@ using the given X/Y spacings Auto distribute - Auto distribute + თვითგანაწილება @@ -8176,7 +8111,7 @@ using the given X/Y spacings Project Shapes - Project Shapes + პროექტის მოხაზულობები @@ -8226,12 +8161,12 @@ using the given X/Y spacings Hidden iso-parameters - Hidden iso-parameters + დამალული იზოპარამეტრები No Active Document - No Active Document + აქტიური დოკუმენტის გარეშე @@ -8241,7 +8176,7 @@ using the given X/Y spacings No Active View - No Active View + აქტიური ხედის გარეშე @@ -8445,22 +8380,22 @@ using the given X/Y spacings Preset view direction looking up - Preset view direction looking up + პრესეტის ხედის მიმართულება მაღლა იყურება Preset view direction looking down - Preset view direction looking down + პრესეტის ხედის მიმართულება დაბლა იყურება Preset view direction looking left - Preset view direction looking left + პრესეტის ხედის მიმართულება მარცხნივ იყურება Preset view direction looking right - Preset view direction looking right + პრესეტის ხედის მიმართულება მარჯვნივ იყურება @@ -8475,7 +8410,7 @@ using the given X/Y spacings Check to update display after every property change - Check to update display after every property change + ჩართეთ თვისების ყოველი ცვლილების შემდეგ ეკრანის განახლებისთვის @@ -8521,7 +8456,7 @@ using the given X/Y spacings Line Attributes - Line Attributes + ხაზის ატრიბუტები @@ -8566,7 +8501,7 @@ using the given X/Y spacings Select Line Attributes - Select Line Attributes + აირჩიეთ ხაზის ატრიბუტები @@ -8630,7 +8565,7 @@ using the given X/Y spacings Hole/Shaft Fit ISO 286 - Hole/Shaft Fit ISO 286 + ნახვრეტი/ლილვი შეესაბამება ISO 286-ს @@ -8689,12 +8624,12 @@ using the given X/Y spacings Reapplies auto-fill to this field - Reapplies auto-fill to this field + თავიდან გადაატარებს ავტოშევსებას ამ ველს The autofill replacement value - The autofill replacement value + ავტოშევსების ჩანაცვლების მნიშვნელობა @@ -8815,17 +8750,17 @@ using the given X/Y spacings Attributes/Modifications - Attributes/Modifications + ატრიბუტები/ცვლილებები Centerlines/Threading - Centerlines/Threading + ცენტრალური ხაზები/კუთხვილი Format/Organize Dimensions - Format/Organize Dimensions + განზომილებების დაფორმატება/ორგანიზაცია @@ -8863,17 +8798,17 @@ using the given X/Y spacings Moves a view to a new page - Moves a view to a new page + გადააქვს ხედი ახალ გვერდზე Move View to Different Page - Move View to Different Page + ხედის გადატანა სხვა გვერდზე Select view to move from list. - Select view to move from list. + აირჩიეთ ხედი სიიდან გადასატანად. @@ -8883,12 +8818,12 @@ using the given X/Y spacings Select from page. - Select from page. + აირჩიეთ გვერდიდან. Select to page. - Select to page. + გვერდამდე მონიშვნა. @@ -8907,12 +8842,12 @@ using the given X/Y spacings Shares a view on a second page - Shares a view on a second page + აზიარებს ხედს მეორე გვერდზე Share View With Another Page - Share View With Another Page + ხედის გაზიარება სხვა გვერდისთვის @@ -8922,17 +8857,17 @@ using the given X/Y spacings Select view to share from list. - Select view to share from list. + აირჩიეთ ხედი სიიდან გასაზიარებლად. Select from page. - Select from page. + აირჩიეთ გვერდიდან. Select to page. - Select to page. + გვერდამდე მონიშვნა. @@ -8971,12 +8906,12 @@ using the given X/Y spacings Replace references with current selection - Replace references with current selection + მიმართვების ჩანაცვლება მიმდინარე მონიშნულით The view that owns this dimension - The view that owns this dimension + ხედი, რომელიც ამ განზომილების მფლობელია @@ -9007,19 +8942,19 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw ტექნიკური ნახაზი - + Repair Dimension References ზომის ორიენტირების გასწორება - + Repairs broken or incorrect dimension references - Repairs broken or incorrect dimension references + შეაკეთებს გაფუჭებულ, ან არასწორ განზომილების მითითებებს @@ -9027,7 +8962,7 @@ using the given X/Y spacings Hole/Shaft Fit - Hole/Shaft Fit + ნახვრეტის/ლილვის ჩასმა @@ -9062,7 +8997,7 @@ using the given X/Y spacings Hole/Shaft Fit ISO 286 - Hole/Shaft Fit ISO 286 + ნახვრეტი/ლილვი შეესაბამება ISO 286-ს @@ -9095,7 +9030,7 @@ using the given X/Y spacings Filled triangle - Filled triangle + შევსებული სამკუთხედი @@ -9355,7 +9290,7 @@ there is an open task dialog. Circle center - Circle center + წრეწირის ცენტრი @@ -9365,7 +9300,7 @@ there is an open task dialog. End angle - End angle + საბოლოო კუთხე @@ -9375,7 +9310,7 @@ there is an open task dialog. End angle (conventional) of arc in degrees - End angle (conventional) of arc in degrees + რკალის საბოლოო კუთხე (მიღებული) გრადუსებში @@ -9385,7 +9320,7 @@ there is an open task dialog. Uses angles and create a circular arc - Uses angles and create a circular arc + იყენებს კუთხეებს და ქმნის წრიულ რკალს @@ -9419,13 +9354,13 @@ there is an open task dialog. Cosmetic 1 Point Circle - Cosmetic 1 Point Circle + დამხმარე 1 წერტილი წრეწირი Adds a cosmetic circle based on a selected centerpoint - Adds a cosmetic circle based on a selected centerpoint + ამატებს დამხმარე წრეს მონიშნულ ცენტრის წერტილზე დაყრდნობით @@ -9438,7 +9373,7 @@ there is an open task dialog. Arc Length Annotation - Arc Length Annotation + რკალის სიგრძის ანოტაცია @@ -9489,12 +9424,12 @@ there is an open task dialog. Offset Vertex - Offset Vertex + წიბოს წანაცვლება Creates an offset from one selected vertex - Creates an offset from one selected vertex + ქმნის წანაცვლებას ერთი მონიშნული წვეროსგან @@ -9502,7 +9437,7 @@ there is an open task dialog. Fill Template Fields In - Fill Template Fields In + შეავსეთ შაბლონის ველები @@ -9517,12 +9452,12 @@ there is an open task dialog. Update Template Fields - Update Template Fields + შაბლონის ველების განახლება Uses document info to populate the template fields - Uses document info to populate the template fields + იყენებს დოკუმენტის ინფორმაციის შაბლონის ველების შესავსებად @@ -9540,7 +9475,7 @@ there is an open task dialog. View or projection group missing - View or projection group missing + ხედი ან პროექციის ჯგუფი ვერ ვიპოვე @@ -9881,12 +9816,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension ზომა - + Dimension tools განზომილების ხელსაწყოები @@ -9894,17 +9829,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw ტექნიკური ნახაზი - + Area Annotation - Area Annotation + ფართობის ანოტაცია - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10001,7 +9936,7 @@ there is an open task dialog. Align Vertices/Edge Vertically - Align Vertices/Edge Vertically + წვეროების/წიბოს სწორება ვერტიკალურად @@ -10019,7 +9954,7 @@ there is an open task dialog. Align Vertices/Edge Horizontally - Align Vertices/Edge Horizontally + წვეროების/წიბოს სწორება ჰორიზონტალურად @@ -10032,7 +9967,7 @@ there is an open task dialog. updates pending - updates pending + დარჩენილი განახლება @@ -10040,7 +9975,7 @@ there is an open task dialog. Axonometric Length Dimension - Axonometric Length Dimension + აქსონომეტრიული სიგრძის განზომილება @@ -10053,7 +9988,7 @@ there is an open task dialog. Cosmetic Intersection Vertices - Cosmetic Intersection Vertices + კოსმეტიკური კვეთის წვეროები @@ -10066,7 +10001,7 @@ there is an open task dialog. Inserts a simple section view - Inserts a simple section view + ჩასვამს მარტივ ჭრილის ხედს @@ -10074,7 +10009,7 @@ there is an open task dialog. Inserts a complex section view - Inserts a complex section view + ჩასვამს კომპლექსურ ჭრილის ხედს @@ -10082,7 +10017,7 @@ there is an open task dialog. Inserts a cosmetic vertex into a view - Inserts a cosmetic vertex into a view + ხედში ჩასვამს დამხმარე წვეროს @@ -10090,7 +10025,7 @@ there is an open task dialog. Midpoint vertices - Midpoint vertices + შუაწერტილის წვეროები @@ -10106,7 +10041,7 @@ there is an open task dialog. Quadrant vertices - Quadrant vertices + კვადრანტის წვეროები @@ -10122,7 +10057,7 @@ there is an open task dialog. Adds a centerline to selected faces - Adds a centerline to selected faces + ამატებს ცენტრალურ ხაზს მონიშნულ სიბრტყეებს @@ -10130,7 +10065,7 @@ there is an open task dialog. Centerline 2 lines - Centerline 2 lines + ცენტრალური ხაზი 2 ხაზი @@ -10138,7 +10073,7 @@ there is an open task dialog. Adds a centerline between 2 selected lines - Adds a centerline between 2 selected lines + ამატებს ცენტრალურ ხაზს 2 მონიშნულ ხაზს შორის @@ -10146,7 +10081,7 @@ there is an open task dialog. Centerline 2 points - Centerline 2 points + ცენტრალური ხაზი 2 წერილი @@ -10154,23 +10089,23 @@ there is an open task dialog. Adds a centerline between 2 selected points - Adds a centerline between 2 selected points + ამატებს ცენტრალურ ხაზს 2 მონიშნულ წერტილს შორის TechDraw_HorizontalExtent - + Insert horizontal extent dimension - Insert horizontal extent dimension + ჰორიზონტალური გაბარიტული განზომილების ჩასმა TechDraw_VerticalExtentDimension - + Insert vertical extent dimension - Insert vertical extent dimension + ვერტიკალური სიდიდის განზომილების ჩასმა @@ -10178,7 +10113,7 @@ there is an open task dialog. Moves the view to the top of the stack - Moves the view to the top of the stack + გადააქვს ხედი შეკვრის თავში @@ -10186,7 +10121,7 @@ there is an open task dialog. Moves the view to the bottom of the stack - Moves the view to the bottom of the stack + გადააქვს ხედი შეკვრის ბოლოში @@ -10194,7 +10129,7 @@ there is an open task dialog. Moves the view up one level - Moves the view up one level + ააქვს ხედი ერთი დონით მაღლა @@ -10202,7 +10137,7 @@ there is an open task dialog. Moves the view down one level - Moves the view down one level + ჩამოაქვს ხედი ერთი დონით დაბლა @@ -10225,7 +10160,7 @@ there is an open task dialog. Repair dimension - Repair dimension + განზომილების შეკეთება @@ -10233,7 +10168,7 @@ there is an open task dialog. Restore invisible lines - Restore invisible lines + უხილავი ხაზების აღდგენა diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index 69417a8d65..c0eedd7661 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw 기술도면 - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw 기술도면 - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw 기술도면 - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw 기술도면 - + Dimension 치수 - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw 기술도면 - + Extent Dimension Extent Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw 기술도면 - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw 기술도면 - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - 기술도면 - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw 기술도면 - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - 기술도면 - - - - Link Dimension to 3D Geometry - Link Dimension to 3D Geometry - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw 기술도면 - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw 기술도면 - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw 기술도면 - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.주석 생성 - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension 3점 각도 치수 추가 - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension 길이 치수 추가 - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions 경사 직렬 치수 추가 - + Add oblique coord dimensions 경사 병렬 치수 추가 - + Dimension 치수 - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - 치수 생성 - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first 먼저 대상체를 선택하세요 - + Too many objects selected 너무 많은 대상체들이 선택되었습니다 @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. 먼저 페이지를 작성합니다. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? 선택된 모서리는 B-조절곡선 입니다. 값은 근사치가 될 것입니다. 계속할까요? - - There is no 3D object in your selection - There is no 3D object in your selection - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw 기술도면 @@ -9005,17 +8940,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw 기술도면 - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9878,12 +9813,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension 치수 - + Dimension tools Dimension tools @@ -9891,17 +9826,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw 기술도면 - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10157,7 +10092,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10165,7 +10100,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 617bc1278e..e3efd64977 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Afmeting - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Verleng Afmeting - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Koppel een afmeting aan de 3D-geometrie - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Aantekening maken - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Afmeting - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Dimensie maken - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Selecteer eerst een object - + Too many objects selected Te veel objecten geselecteerd @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Maak eerst een pagina. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Er is geen 3D-object in uw selectie - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9007,17 +8942,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9881,12 +9816,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Afmeting - + Dimension tools Dimension tools @@ -9894,17 +9829,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10160,7 +10095,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10168,7 +10103,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 7f11f31643..3f3e7135de 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Rysunek Techniczny - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Rysunek Techniczny - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Rysunek Techniczny - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Rysunek Techniczny - + Dimension Wymiar - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1480,27 +1480,27 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawExtentGroup - + TechDraw Rysunek Techniczny - + Extent Dimension Rozmiar zakresu - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1562,17 +1562,17 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawHorizontalDimension - + TechDraw Rysunek Techniczny - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1580,17 +1580,17 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawHorizontalExtentDimension - + TechDraw Rysunek Techniczny - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1628,24 +1628,6 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień Pliki obrazów (*.jpg*.jpeg *.png *.bmp);; Wszystkie pliki (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Rysunek Techniczny - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1667,39 +1649,21 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawLengthDimension - + TechDraw Rysunek Techniczny - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Rysunek Techniczny - - - - Link Dimension to 3D Geometry - Powiąż wymiar z geometrią 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1839,17 +1803,17 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawRadiusDimension - + TechDraw Rysunek Techniczny - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2121,17 +2085,17 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawVerticalDimension - + TechDraw Rysunek Techniczny - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2139,17 +2103,17 @@ gdzie pierwszy jest punktem środkowym, a drugi to promień CmdTechDrawVerticalExtentDimension - + TechDraw Rysunek Techniczny - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2280,200 +2244,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Utwórz adnotację - + Add Extent dimension Dodaj wymiar zewnętrzny - - + + Add horizontal chain dimensions Dodaj serię wymiarów poziomo - - + + Add horizontal coordinate dimensions Dodaj wymiary współrzędnych poziomych - - - + + + Add 3-points angle dimension Dodaj wymiar kąta przez trzy punkty - + Add horizontal chain dimension Dodaj serię wymiarów poziomo - - - + + + Add length dimension Dodaj wymiar długości - + Add edge length dimension Dodaj wymiar długości krawędzi - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Dodaj poziome współrzędne wymiarów - + Add vertical chain dimensions Dodaj serię wymiarów pionowo - + Add vertical coord dimensions Dodaj pionowe współrzędne wymiarów - + Add oblique chain dimensions Dodaj serię wymiarów ukośnie - + Add oblique coord dimensions Dodaj ukośne współrzędne wymiarów - + Dimension Wymiar - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Utwórz wymiar - - - + Create dimension Create dimension @@ -3170,8 +3129,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3212,16 +3169,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3272,17 +3227,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3349,13 +3304,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Najpierw wybierz obiekt - + Too many objects selected Wybrano zbyt wiele obiektów @@ -3445,88 +3400,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Najpierw utwórz stronę. @@ -3542,9 +3482,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3559,26 +3499,21 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Wybrana krawędź jest Elipsą. Wartość będzie przybliżona. Kontynuować? - + Selected edge is a B-spline. Value will be approximate. Continue? Wybrana krawędź jest Krzywą złożoną. Wartość będzie przybliżona. Kontynuować? - - There is no 3D object in your selection - W zaznaczeniu nie ma obiektu 3D - - - + Selection contains both 2D and 3D geometry Wybór zawiera zarówno geometrię 2D, jak i 3D @@ -4266,13 +4201,13 @@ Kontynuować? Cannot make dimension from selection + - TechDraw Rysunek Techniczny @@ -9020,17 +8955,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Rysunek Techniczny - + Repair Dimension References Napraw odniesienia do wymiarów - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9894,12 +9829,12 @@ ponieważ jest otwarte okno dialogowe zadania. CmdTechDrawCompDimensionTools - + Dimension Wymiar - + Dimension tools Dimension tools @@ -9907,17 +9842,17 @@ ponieważ jest otwarte okno dialogowe zadania. CmdTechDrawAreaDimension - + TechDraw Rysunek Techniczny - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10173,7 +10108,7 @@ ponieważ jest otwarte okno dialogowe zadania. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10181,7 +10116,7 @@ ponieważ jest otwarte okno dialogowe zadania. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index c0068861ea..bc6ad862d2 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - Desenhos Técnicos - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - Desenhos Técnicos - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - Desenhos Técnicos - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - Desenhos Técnicos - + Dimension Dimensão - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - Desenhos Técnicos - + Extent Dimension Extender medida - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - Desenhos Técnicos - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - Desenhos Técnicos - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Arquivos de imagem (*.jpg *.jpeg *.png *.bmp);;Todos os arquivos (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - Desenhos Técnicos - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - Desenhos Técnicos - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - Desenhos Técnicos - - - - Link Dimension to 3D Geometry - Vincular uma cota a uma geometria 3D - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - Desenhos Técnicos - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - Desenhos Técnicos - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - Desenhos Técnicos - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Criar anotação - + Add Extent dimension Adicionar dimensão de extensões - - + + Add horizontal chain dimensions Adicionar dimensões horizontais em cadeia - - + + Add horizontal coordinate dimensions Adicionar dimensões de coordenadas horizontais - - - + + + Add 3-points angle dimension Adicionar dimensão de ângulo com três pontos - + Add horizontal chain dimension Adicionar dimensão horizontal em cadeia - - - + + + Add length dimension Adicionar dimensão de comprimento - + Add edge length dimension Adicionar dimensão do comprimento de aresta - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Adicionar dimensões de corda horizontais - + Add vertical chain dimensions Adicionar dimensões verticais em cadeia - + Add vertical coord dimensions Adicionar dimensões de corda verticais - + Add oblique chain dimensions Adicionar dimensões oblíquas em cadeia - + Add oblique coord dimensions Adicionar dimensões oblíquas de corda - + Dimension Dimensão - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Criar dimensão - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Selecione um objeto primeiro - + Too many objects selected Demasiados objetos selecionados @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Primeiro, crie uma página. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? A aresta selecionada é uma elipse. O valor será aproximado. Continuar? - + Selected edge is a B-spline. Value will be approximate. Continue? A aresta selecionada é uma Bspline. O valor será aproximado. Continuar? - - There is no 3D object in your selection - Não há nenhum objeto 3D na sua seleção - - - + Selection contains both 2D and 3D geometry Seleção contém geometria 2D e 3D @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw - Desenhos Técnicos @@ -9007,17 +8942,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - Desenhos Técnicos - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9881,12 +9816,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Dimensão - + Dimension tools Dimension tools @@ -9894,17 +9829,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - Desenhos Técnicos - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10160,7 +10095,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10168,7 +10103,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 5f9848997b..08ed2ca56a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Desen tehnic - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Desen tehnic - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Desen tehnic - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Desen tehnic - + Dimension Dimensiune - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Desen tehnic - + Extent Dimension Dimensiune de extindere - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Desen tehnic - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Desen tehnic - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Desen tehnic - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Desen tehnic - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Desen tehnic - - - - Link Dimension to 3D Geometry - Link Dimension to 3D Geometry - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Desen tehnic - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Desen tehnic - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Desen tehnic - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Create Annotation - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Dimensiune - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Create Dimension - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Selectaţi un obiect mai întâi - + Too many objects selected Prea multe obiecte selectate @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Creați /selectați o pagină mai întâi. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Nu există nici un obiect 3D în selecţia dvs - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Desen tehnic @@ -9007,17 +8942,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Desen tehnic - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9881,12 +9816,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Dimensiune - + Dimension tools Dimension tools @@ -9894,17 +9829,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Desen tehnic - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10160,7 +10095,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10168,7 +10103,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 305dd29f7a..8b15cf73b8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Технический чертёж - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Технический чертёж - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Технический чертёж - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Технический чертёж - + Dimension Размер - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Технический чертёж - + Extent Dimension Размер экстента - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Технический чертёж - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Технический чертёж - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Файлы изображений (*.jpg *.jpeg *.png *.bmp);;Все файлы (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Технический чертёж - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Технический чертёж - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Технический чертёж - - - - Link Dimension to 3D Geometry - Связать размер с размером трехмерного объекта - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Технический чертёж - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Технический чертёж - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Технический чертёж - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Создать Заметку - + Add Extent dimension Добавить габаритный размер - - + + Add horizontal chain dimensions Проставить последовательность горизонтальных размеров - - + + Add horizontal coordinate dimensions Добавить упорядоченные горизонтальные размеры - - - + + + Add 3-points angle dimension Указать размер угла по 3 точкам - + Add horizontal chain dimension Проставить последовательность горизонтальных размеров - - - + + + Add length dimension Указать размер длины отрезка - + Add edge length dimension Указать размер ребра - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Добавить упорядоченные горизонтальные размеры - + Add vertical chain dimensions Проставить последовательность вертикальных размеров - + Add vertical coord dimensions Добавить упорядоченные вертикальные размеры - + Add oblique chain dimensions Проставить последовательность наклонных размеров - + Add oblique coord dimensions Добавить упорядоченные наклонные размеры - + Dimension Размер - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Указать размер - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Сначала выберите объект - + Too many objects selected Выбрано слишком много объектов @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Сначала создайте страницу. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Выбранная фигура — эллипс. Значение будет приблизительным. Продолжить? - + Selected edge is a B-spline. Value will be approximate. Continue? Выбранная кривая — B-сплайн. Значение будет приблизительным. Продолжить? - - There is no 3D object in your selection - В вашем выборе нет трехмерного объекта - - - + Selection contains both 2D and 3D geometry Выборка содержит одновременно двумерный и трехмерный объект @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Технический чертёж @@ -9006,17 +8941,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Технический чертёж - + Repair Dimension References Исправить ссылки на измеряемые объекты - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9879,12 +9814,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Размер - + Dimension tools Dimension tools @@ -9892,17 +9827,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Технический чертёж - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10158,7 +10093,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10166,7 +10101,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index bf29a68da3..c9e7b04fcc 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TehRisanje - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TehRisanje - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TehRisanje - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TehRisanje - + Dimension Mera - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TehRisanje - + Extent Dimension Razsežnostna kota - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TehRisanje - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TehRisanje - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Slikovne datoteke (*.jpg *.jpeg *.png *.bmp);;Vse datoteke (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TehRisanje - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TehRisanje - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TehRisanje - - - - Link Dimension to 3D Geometry - Poveži koto s trirazsežno geometrijo - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TehRisanje - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TehRisanje - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TehRisanje - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Ustvari pripis - + Add Extent dimension Dodaj razsežnostno koto - - + + Add horizontal chain dimensions Dodaj vodoravne zaporedne kote - - + + Add horizontal coordinate dimensions Dodaj vodoravne vzporedne kote - - - + + + Add 3-points angle dimension Dodaj tritočkovno kotno koto - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Mera - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Ustvari koto - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Izberite najprej predmet - + Too many objects selected Izbranih je preveč predmetov @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Najprej ustvarite stran. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - V tvoji izbiri ni 3D objekta - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TehRisbe (TechDraw) @@ -9010,17 +8945,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TehRisbe (TechDraw) - + Repair Dimension References Popravi sklice kót - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9884,12 +9819,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Mera - + Dimension tools Dimension tools @@ -9897,17 +9832,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TehRisbe (TechDraw) - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10163,7 +10098,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10171,7 +10106,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts index 1eab889ecb..02ad911edf 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Tehnički crteži - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Tehnički crteži - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Tehnički crteži - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Tehnički crteži - + Dimension Merne jedinice - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Tehnički crteži - + Extent Dimension Kota raspona - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Tehnički crteži - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Tehnički crteži - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Slikovne datoteke (*.jpg *.jpeg *.png *.bmp);;Sve datoteke (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Tehnički crteži - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Tehnički crteži - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Tehnički crteži - - - - Link Dimension to 3D Geometry - Poveži kotu sa 3D geometrijom - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Tehnički crteži - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Tehnički crteži - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Tehnički crteži - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Napravi napomenu - + Add Extent dimension Kotiraj raspon - - + + Add horizontal chain dimensions Kotiraj horizontalnim rednim kotama - - + + Add horizontal coordinate dimensions Kotiraj horizontalnim paralelnim kotama - - - + + + Add 3-points angle dimension Kotiraj ugao pomoću 3 tačke - + Add horizontal chain dimension Kotiraj horizontalnu rednu kotu - - - + + + Add length dimension Kotiraj rastojanje - + Add edge length dimension Kotiraj dužinu ivice - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Kotiraj horizontalnim paralelnim kotama - + Add vertical chain dimensions Kotiraj vertikalnim rednim kotama - + Add vertical coord dimensions Kotiraj vertikalnim paralelnim kotama - + Add oblique chain dimensions Kotiraj kosim rednim kotama - + Add oblique coord dimensions Kotiraj kosim paralelnim kotama - + Dimension Kota - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Napravi kotu - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Prvo izaberi objekat - + Too many objects selected Previše objekata je izabrano @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Prvo napravi stranicu. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Izabrana ivica je elipsa. Vrednost će biti približna. Nastavi? - + Selected edge is a B-spline. Value will be approximate. Continue? Izabrana ivica je B-Splajn. Vrednost će biti približna. Nastavi? - - There is no 3D object in your selection - Nisi izabrao 3D objekat - - - + Selection contains both 2D and 3D geometry Izabrana je i 2D i 3D geometrija @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Tehnički crteži @@ -9008,17 +8943,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Tehnički crteži - + Repair Dimension References Popravi reference kote - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Kota - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Tehnički crteži - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 315213e472..9b70b7f9d4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw Технички цртежи - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw Технички цртежи - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw Технички цртежи - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw Технички цртежи - + Dimension Мерне јединице - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw Технички цртежи - + Extent Dimension Кота распона - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw Технички цртежи - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw Технички цртежи - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Сликовне датотеке (*.jpg *.jpeg *.png *.bmp);;Све датотеке (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - Технички цртежи - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw Технички цртежи - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - Технички цртежи - - - - Link Dimension to 3D Geometry - Повежи коту са 3Д геометријом - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw Технички цртежи - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw Технички цртежи - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw Технички цртежи - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Направи Напомену - + Add Extent dimension Котирај распон - - + + Add horizontal chain dimensions Котирај хоризонталним редним котама - - + + Add horizontal coordinate dimensions Котирај хоризонталним паралелним котама - - - + + + Add 3-points angle dimension Котирај угао помоћу 3 тачке - + Add horizontal chain dimension Котирај хоризонталним редним котама - - - + + + Add length dimension Котирај растојање - + Add edge length dimension Котирај дужину ивице - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Котирај хоризонталним паралелним котама - + Add vertical chain dimensions Котирај вертикалним редним котама - + Add vertical coord dimensions Котирај вертикалним паралелним котама - + Add oblique chain dimensions Котирај косим редним котама - + Add oblique coord dimensions Котирај косим паралелним котама - + Dimension Кота - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Направи коту - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Прво изабери објекат - + Too many objects selected Превише објеката је изабрано @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Прво направи страницу. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Изабрана ивица је елипса. Вредност ће бити приближна. Настави? - + Selected edge is a B-spline. Value will be approximate. Continue? Изабрана ивица је Б-Сплајн. Вредност ће бити приближна. Настави? - - There is no 3D object in your selection - Ниси изабрао 3Д објекат - - - + Selection contains both 2D and 3D geometry Изабрана је и 2Д и 3Д геометрија @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw Технички цртежи @@ -9008,17 +8943,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw Технички цртежи - + Repair Dimension References Поправи референце коте - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Кота - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw Технички цртежи - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 9c973d1df3..ced5152e8f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TechDraw - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TechDraw - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TechDraw - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TechDraw - + Dimension Dimension - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TechDraw - + Extent Dimension Utsträckning Dimension - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TechDraw - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TechDraw - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Bildfiler (*.jpg *.jpeg *.png *.bmp);;Alla filer (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TechDraw - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TechDraw - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TechDraw - - - - Link Dimension to 3D Geometry - Länka dimension till 3D-geometri - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TechDraw - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TechDraw - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TechDraw - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Skapa anteckning - + Add Extent dimension Lägg till Extent-dimension - - + + Add horizontal chain dimensions Lägg till horisontella kedjemått - - + + Add horizontal coordinate dimensions Lägg till horisontella koordinatmått - - - + + + Add 3-points angle dimension Lägg till 3-punkts vinkeldimension - + Add horizontal chain dimension Lägg till horisontell kedjedimension - - - + + + Add length dimension Lägg till längdmått - + Add edge length dimension Lägg till dimension för kantlängd - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Lägg till horisontella koordinatmått - + Add vertical chain dimensions Lägg till vertikala kedjedimensioner - + Add vertical coord dimensions Lägg till vertikala koordinatmått - + Add oblique chain dimensions Lägg till sneda kedjemått - + Add oblique coord dimensions Lägg till sneda koordinatdimensioner - + Dimension Dimension - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Skapa dimension - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Markera ett objekt först - + Too many objects selected För många objekt markerade @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Skapa en sida först. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Vald kant är en ellips. Värdet kommer att vara ungefärligt. Fortsätta? - + Selected edge is a B-spline. Value will be approximate. Continue? Vald kant är en B-spline. Värdet kommer att vara ungefärligt. Fortsätta? - - There is no 3D object in your selection - Det finns inget 3D-objekt i aktuell markering - - - + Selection contains both 2D and 3D geometry Urvalet innehåller både 2D- och 3D-geometri @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TechDraw @@ -9006,17 +8941,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TechDraw - + Repair Dimension References Reparation Dimension Referenser - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ det finns en öppen uppgiftsdialog. CmdTechDrawCompDimensionTools - + Dimension Dimension - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ det finns en öppen uppgiftsdialog. CmdTechDrawAreaDimension - + TechDraw TechDraw - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ det finns en öppen uppgiftsdialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ det finns en öppen uppgiftsdialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index 366d134548..e2ab355544 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw TeknikÇizim - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw TeknikÇizim - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw TeknikÇizim - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw TeknikÇizim - + Dimension Boyut - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw TeknikÇizim - + Extent Dimension Ölçü Boyutu - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw TeknikÇizim - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw TeknikÇizim - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - TeknikÇizim - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw TeknikÇizim - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - TeknikÇizim - - - - Link Dimension to 3D Geometry - 3D geometriye bir ebat ekle - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw TeknikÇizim - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw TeknikÇizim - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw TeknikÇizim - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Açıklama Oluşturun - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Boyut - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Ölçü Oluştur - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Önce bir nesne seçin - + Too many objects selected Çok fazla nesne seçili @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Önce bir sayfa oluşturun. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Seçiminizde 3D nesne yok - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw TeknikÇizim @@ -9004,17 +8939,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw TeknikÇizim - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9878,12 +9813,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Boyut - + Dimension tools Dimension tools @@ -9891,17 +9826,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw TeknikÇizim - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10157,7 +10092,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10165,7 +10100,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 8462db8563..75f3591655 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw ТехМалюнок - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw ТехМалюнок - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw ТехМалюнок - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw ТехМалюнок - + Dimension Розмірність - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw ТехМалюнок - + Extent Dimension Вимір протяжності - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw ТехМалюнок - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw ТехМалюнок - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - ТехМалюнок - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw ТехМалюнок - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - ТехМалюнок - - - - Link Dimension to 3D Geometry - Link Dimension to 3D Geometry - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw ТехМалюнок - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw ТехМалюнок - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw ТехМалюнок - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.Створити примітку - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension Розмірність - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - Створити розмір - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first Оберіть об'єкт для початку - + Too many objects selected Обрано забагато об'єктів @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. Спочатку створіть сторінку. @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - Ви не обрали 3D об'єкт - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw ТехМалюнок @@ -9006,17 +8941,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw ТехМалюнок - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9880,12 +9815,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension Розмірність - + Dimension tools Dimension tools @@ -9893,17 +9828,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw ТехМалюнок - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10159,7 +10094,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10167,7 +10102,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index f2d44b0b66..5afa5df9d0 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw 工程图 - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw 工程图 - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges 在两个边缘之间插入一个角度尺寸 @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw 工程图 - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw 工程图 - + Dimension 尺寸标注 - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw 工程图 - + Extent Dimension 扩展尺寸 - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw 工程图 - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw 工程图 - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - - CmdTechDrawLandmarkDimension - - - TechDraw - 工程图 - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw 工程图 - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - 工程图 - - - - Link Dimension to 3D Geometry - 链接尺寸到三维几何体 - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw 工程图 - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw 工程图 - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw 工程图 - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.创建批注 - + Add Extent dimension Add Extent dimension - - + + Add horizontal chain dimensions Add horizontal chain dimensions - - + + Add horizontal coordinate dimensions Add horizontal coordinate dimensions - - - + + + Add 3-points angle dimension Add 3-points angle dimension - + Add horizontal chain dimension Add horizontal chain dimension - - - + + + Add length dimension Add length dimension - + Add edge length dimension Add edge length dimension - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions Add horizontal coord dimensions - + Add vertical chain dimensions Add vertical chain dimensions - + Add vertical coord dimensions Add vertical coord dimensions - + Add oblique chain dimensions Add oblique chain dimensions - + Add oblique coord dimensions Add oblique coord dimensions - + Dimension 尺寸标注 - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - 创建尺寸 - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first 首先选择对象 - + Too many objects selected 选择的对象过多 @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. 首先创建一个页面。 @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? Selected edge is an Ellipse. Value will be approximate. Continue? - + Selected edge is a B-spline. Value will be approximate. Continue? Selected edge is a B-spline. Value will be approximate. Continue? - - There is no 3D object in your selection - 选择中没有3D 对象 - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw 工程图 @@ -9004,17 +8939,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw 工程图 - + Repair Dimension References Repair Dimension References - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9878,12 +9813,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension 尺寸标注 - + Dimension tools Dimension tools @@ -9891,17 +9826,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw 工程图 - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10157,7 +10092,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10165,7 +10100,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index abd4432a26..d5bab57cf7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -58,17 +58,17 @@ CmdTechDraw3PtAngleDimension - + TechDraw 工程製圖 - + Angle Dimension From 3 Points Angle Dimension From 3 Points - + Inserts an angle dimension between 3 selected points Inserts an angle dimension between 3 selected points @@ -89,17 +89,17 @@ CmdTechDrawAngleDimension - + TechDraw 工程製圖 - + Angle Dimension Angle Dimension - + Inserts an angle dimension between two edges Inserts an angle dimension between two edges @@ -351,17 +351,17 @@ CmdTechDrawDiameterDimension - + TechDraw 工程製圖 - + Diameter Dimension Diameter Dimension - + Inserts a diameter dimension of a circular edge or arc Inserts a diameter dimension of a circular edge or arc @@ -369,17 +369,17 @@ CmdTechDrawDimension - + TechDraw 工程製圖 - + Dimension 標註尺寸 - + Inserts new contextual dimensions to the selection. Depending on your selection you might have several dimensions available. You can cycle through them using the M key. Left clicking on empty space will validate the current dimension. Right clicking or pressing Esc will cancel. @@ -1479,27 +1479,27 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawExtentGroup - + TechDraw 工程製圖 - + Extent Dimension 範圍標註 - + Inserts a dimension showing the extent (overall length) of an object or feature Inserts a dimension showing the extent (overall length) of an object or feature - + Horizontal extent Horizontal extent - + Vertical extent Vertical extent @@ -1561,17 +1561,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalDimension - + TechDraw 工程製圖 - + Horizontal Length Dimension Horizontal Length Dimension - + Inserts a horizontal length dimension of an edge or distance between two points Inserts a horizontal length dimension of an edge or distance between two points @@ -1579,17 +1579,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawHorizontalExtentDimension - + TechDraw 工程製圖 - + Horizontal Extent Dimension Horizontal Extent Dimension - + Inserts a dimension showing the horizontal extent (overall length) of an object or feature. Inserts a dimension showing the horizontal extent (overall length) of an object or feature. @@ -1627,24 +1627,6 @@ Left clicking on empty space will validate the current dimension. Right clicking 圖片檔(*.bmp *.jpg *.png *.tif);;所有檔案 (*.*) - - CmdTechDrawLandmarkDimension - - - TechDraw - 工程製圖 - - - - Landmark Dimension - Landmark Dimension - - - - Inserts a landmark dimension (experimental feature). Use with caution. - Inserts a landmark dimension (experimental feature). Use with caution. - - CmdTechDrawLeaderLine @@ -1666,39 +1648,21 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawLengthDimension - + TechDraw 工程製圖 - + Length Dimension Length Dimension - + Inserts a length dimension of an edge or distance between two points Inserts a length dimension of an edge or distance between two points - - CmdTechDrawLinkDimension - - - TechDraw - 工程製圖 - - - - Link Dimension to 3D Geometry - 連接標註到3D幾何 - - - - Links the selected TechDraw dimensions to 3D geometry - Links the selected TechDraw dimensions to 3D geometry - - CmdTechDrawMidpoints @@ -1838,17 +1802,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawRadiusDimension - + TechDraw 工程製圖 - + Radius Dimension Radius Dimension - + Inserts a radius dimension of a circular edge or arc Inserts a radius dimension of a circular edge or arc @@ -2120,17 +2084,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalDimension - + TechDraw 工程製圖 - + Vertical Length Dimension Vertical Length Dimension - + Inserts a vertical length dimension of an edge or distance between two points Inserts a vertical length dimension of an edge or distance between two points @@ -2138,17 +2102,17 @@ Left clicking on empty space will validate the current dimension. Right clicking CmdTechDrawVerticalExtentDimension - + TechDraw 工程製圖 - + Vertical Extent Dimension Vertical Extent Dimension - + Inserts a dimension showing the vertical extent (overall length) of an object or feature. Inserts a dimension showing the vertical extent (overall length) of an object or feature. @@ -2279,200 +2243,195 @@ If no object is selected, a file browser opens to select an SVG or image file.建立註解 - + Add Extent dimension 添加範圍標註 - - + + Add horizontal chain dimensions 添加水平連續標註 - - + + Add horizontal coordinate dimensions 添加水平座標標註 - - - + + + Add 3-points angle dimension 添加 3 點角度標註 - + Add horizontal chain dimension 添加水平連續標註 - - - + + + Add length dimension 添加長度標註 - + Add edge length dimension 添加邊長度標註 - + Insert dimension Insert dimension - + Add area dimension Add area dimension - - - + + + Add distance dimension Add distance dimension - - - + + + Add distanceX chamfer dimension Add distanceX chamfer dimension - + Add point to line distance dimension Add point to line distance dimension - - - - - - - - + + + + + + + + Add extent dimension Add extent dimension - + Add angle dimension Add angle dimension - + Add circle to line distance dimension Add circle to line distance dimension - + Add ellipse to line distance dimension Add ellipse to line distance dimension - - + + Add arc length dimension Add arc length dimension - + Add circle to circle distance dimension Add circle to circle distance dimension - + Add ellipse to ellipse distance dimension Add ellipse to ellipse distance dimension - + Add radius dimension Add radius dimension - + Add diameter dimension Add diameter dimension - + Add distanceX dimension Add distanceX dimension - + Add distanceY chamfer dimension Add distanceY chamfer dimension - + Add distanceY dimension Add distanceY dimension - + Add distanceX extent dimension Add distanceX extent dimension - + Add distanceY extent dimension Add distanceY extent dimension - + Add horizontal coord dimensions 添加水平座標標註 - + Add vertical chain dimensions 添加垂直連續標註 - + Add vertical coord dimensions 添加垂直座標標註 - + Add oblique chain dimensions 添加傾斜連續標註 - + Add oblique coord dimensions 添加傾斜座標標註 - + Dimension 標註尺寸 - + Create Dimension DistanceX Create Dimension DistanceX - + Create Dimension DistanceY Create Dimension DistanceY - - Create Dimension - 建立標註 - - - + Create dimension Create dimension @@ -3169,8 +3128,6 @@ If no object is selected, a file browser opens to select an SVG or image file. - - Wrong selection @@ -3211,16 +3168,14 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - + + + + + + + + @@ -3271,17 +3226,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - - - - - - - - - + + + + + + + + + + + @@ -3348,13 +3303,13 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Select an object first 請先選一個物件 - + Too many objects selected 太多物件被選擇 @@ -3444,88 +3399,73 @@ If no object is selected, a file browser opens to select an SVG or image file.Page contains DrawViewBIM which will not be exported. Continue? - - - - - - - - - - - + + + + + + + + + + + Close the active task dialog and try again Close the active task dialog and try again - - There are no 3D edges or vertices in your selection - There are no 3D edges or vertices in your selection - - - - + + No view of a part in selection. No view of a part in selection. - + Cannot make 2D extent dimension from selection Cannot make 2D extent dimension from selection - + Cannot make 3D extent dimension from selection Cannot make 3D extent dimension from selection - + There is no dimension in your selection There is no dimension in your selection - - Select 2 point objects and 1 view. (1) - Select 2 point objects and 1 view. (1) - - - - Select 2 point objects and 1 view. (2) - Select 2 point objects and 1 view. (2) - - - + Cannot make 2D dimension from selection Cannot make 2D dimension from selection - + Cannot make 3D dimension from selection Cannot make 3D dimension from selection - + Ellipse curve warning Ellipse curve warning - + B-spline curve warning B-spline curve warning - + B-spline curve error B-spline curve error - + Selected edge is a B-spline and a radius/diameter cannot be calculated. Selected edge is a B-spline and a radius/diameter cannot be calculated. - + Create a page first. 請先建立一個頁面 @@ -3541,9 +3481,9 @@ If no object is selected, a file browser opens to select an SVG or image file. - - - + + + @@ -3558,22 +3498,17 @@ If no object is selected, a file browser opens to select an SVG or image file. - + Selected edge is an Ellipse. Value will be approximate. Continue? 選取的邊是橢圓。其值將是近似值。是否繼續？ - + Selected edge is a B-spline. Value will be approximate. Continue? 選取的邊是 B 雲形線。其值將是近似值。是否繼續？ - - There is no 3D object in your selection - 您的選擇中沒有 3D 物件 - - - + Selection contains both 2D and 3D geometry Selection contains both 2D and 3D geometry @@ -4261,13 +4196,13 @@ If no object is selected, a file browser opens to select an SVG or image file.Cannot make dimension from selection + - TechDraw 工程製圖 @@ -8999,17 +8934,17 @@ using the given X/Y spacings CmdTechDrawDimensionRepair - + TechDraw 工程製圖 - + Repair Dimension References 修復標註參考 - + Repairs broken or incorrect dimension references Repairs broken or incorrect dimension references @@ -9872,12 +9807,12 @@ there is an open task dialog. CmdTechDrawCompDimensionTools - + Dimension 標註尺寸 - + Dimension tools Dimension tools @@ -9885,17 +9820,17 @@ there is an open task dialog. CmdTechDrawAreaDimension - + TechDraw 工程製圖 - + Area Annotation Area Annotation - + Inserts an annotation showing the area of a selected face Inserts an annotation showing the area of a selected face @@ -10151,7 +10086,7 @@ there is an open task dialog. TechDraw_HorizontalExtent - + Insert horizontal extent dimension Insert horizontal extent dimension @@ -10159,7 +10094,7 @@ there is an open task dialog. TechDraw_VerticalExtentDimension - + Insert vertical extent dimension Insert vertical extent dimension diff --git a/src/Mod/Test/Gui/Resources/translations/Test_pl.ts b/src/Mod/Test/Gui/Resources/translations/Test_pl.ts index 315e161508..48aeccb1e1 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_pl.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_pl.ts @@ -11,12 +11,12 @@ FreeCAD Unit Test - FreeCAD Unit Test + Test jednostkowy FreeCAD Select test name - Select test name + Wybierz nazwę testu @@ -71,7 +71,7 @@ Failures - Failures + Niepowodzenia @@ -81,12 +81,12 @@ Remaining - Remaining + Pozostałe Failures and Errors - Failures and Errors + Niepowodzenia i błędy