* pass boolean instead of int to setValue of PropertyBool
* support of symmetric option for two-length mode
* fix bug in TaskPadParameters::updateUI()
* remove strange acronyms from method names
- as discussed here: https://forum.freecadweb.org/viewtopic.php?f=17&t=50466&start=10#p433327
this PR is the first step for new Pad features.
It implements 3 features requested by users:
1. an option to measure the pad length along its direction if there is a custom direction
2. when there are two lengths, the reverse feature should be active
3. the pad dialog shows now always the used pad direction, no matter if it is a custom one or the sketch's normal
- Furthermore there are some code improvements (avoid rounding and blocking signals)
- Also adapt TestPad.py because its test used the case two lengths + reversed but this was not possible before this PR - the reverse option was not take into account for two lengths in FeatureSketchBased.cpp)
Now it is and therefore the test must be updated:
In the test the second sketch has the normal vector 0, -1, 0. As the reverse option is set the pad direction is 0, 1, 0. So in y direction is the length (1mm) and in -y direction is length2 (2mm). This gives together with the other pad of volume 1, a total volume of 4.
- fix UI issue: either reversed or midplane
As noticed by @chennes, when the pad uses symmetric, reversed is not sensible and vice versa.
This commit fixes the missing Gui side for the case midplane is checked and the App side.
- the PR also fix two typos
- Use fuzzy fuse/cut method with tolerance Precision::Confusion()
- Use parallel computation feature
- Allow that individual patterned item fail to intersect the baseobject.
Issue warning instead of error. This was done for performance reasons
but it can also be considered a feature.
- Simplify the code a bit
- Distinguish between overlapping mode and non-overlapping mode. In non-overlapping mode
the tool shapes are compounded instead of fused. For huge benefit in performance.
* set range of Occurrences property to spin box
* connect signals after initializing widgets to avoid superfluous recomputes and possible inconsistencies
* set range of Occurrences property to spin box
* connect signals after initializing widgets to avoid superfluous recomputes and possible inconsistencies
- fixes bug 4581
See the first issue reported here:
https://forum.freecadweb.org/viewtopic.php?f=3&t=56093#p482553
- also fix issue that one could set 1 occurrence for polar patterns despite 2 are required at least
- also fix potential dereferencing null pointer (reported by MSVC)
bug 7: the update view checkbox should be enabled/disabled based on Model thread.
the checked state should not change
bug 8: the Thread depth options should be disabled when Model thread is unchecked.
because they don't do anything in the model it is confusing if they are enabled.
- Thread runout according to DIN 76-1
- Through all length updated to be calculated based on bounding box
- New properties: ModelThread, ThreadDepthType, ThreadDepth,
UseCustomThreadClearance, CustomThreadClearance
- Rename Old but unused parameters related to thread modeling.
- Functionality exposed in UI
LGTM has identified a number of minor issues with the FCGear Part Design
scripts. This commit addresses each of them, and also corrects two minor
spelling errors in the dialog. None of the errors or their fixes are
expected to result in changes to the functionality of the script.
