==============================================================
With the introduction of overridable default behaviour for commands, it makes sense to keep control of the execution path of the activation and deactivation.
Non-virtual interface pattern enforces execution control of the virtual functions, while allowing the behaviour to be overriden in a case by case basis.
======================================================
Creation of EditModeCoinManager class and helpers.
In a nutshell:
- EditModeCoinManager gets most of the content of struct EditData
- Drawing is partly outsourced to EditModeCoinManager
- EditModeCoinManager gets a nested Observer class to deal with parameters
- A struct DrawingParameters is created to store all parameters used for drawing
- EditModeCoinManager assume responsibility for determining the drawing size of the Axes
- Preselection detection responsibility is moved to EditModeCoinManager.
- Generation of constraint nodes and constraint drawing is moved to EditModeCoinManager.
- Constraint generation parameters are refactored into ConstraintParameters.
- Text rendering functions are moved to EditModeCoinManager.
- Move HDPI resolution responsibility from VPSketch to EditModeCoinManager
- Move responsibility to create the scenograph for edit mode to EditModeCoinManager
- Move full updateColor responsibility to EditModeCoinManager
- Allows for mapping N logical layers (LayerId of GeometryFacade) to M coin Layers (M<N). This
is convenient as, unless the representation must be different, there is no point in creating coin
layers (overhead).
Refactoring of geometry drawing:
- Determination of the curve values to draw are outsourced to OCC (SRP and remove code duplications).
- Refactor specific drawing of each geometry type into a single template method, based on classes of geometry.
- Drawing of geometry and constraints made agnostic of scale factors of BSpline weights so that a uniform treatment can be provided.
Refactoring of Overlay Layer:
- A new class EditModeInformationOverlayConverter is a full rewrite of the previous overlay routines.
ViewProviderSketch:
- Major cleanup due to migration of functionalities to EditModeCoinManager
- Reduce public api of ViewProviderSketch due to refactor of DrawSketchHandler
- Major addition of documentation
- ShortcutListener implementation using new ViewProvider Attorney
- Gets a parameter handling nested class to handle all parameters (observer)
- Move rubberband to smart pointer
- Refactor selection and preselection into nested classes
- Removal of SEL_PARAMS macro. This macro was making the code unreadable as it "captured" a local stringstream that appeared unused. Substituted by local private member functions.
- Remove EditData
- Improve documentation
- Refactor Preselection struct to remove magical numbers
- Refactor Selection mechanism to remove hacks
ViewProviderSketchDrawSketchHandlerAttorney:
- new Attorney to limit access to ViewProviderSketch and reduce its public interface
- In order to enforce a certain degree of encapsulation and promote a not too tight coupling, while still allowing well
defined collaboration, DrawSketchHandler accesses ViewProviderSketch via this Attorney class.
-DrawSketchHandler has the responsibility of drawing edit temporal curves and markers necessary to enable visual feedback
to the user, as well as the UI interaction during such edits. This is its exclusive responsibility under the Single
Responsibility Principle.
- A plethora of speciliased handlers derive from DrawSketchHandler for each specialised editing (see for example all the
handlers for creation of new geometry). These derived classes do * not * have direct access to the
ViewProviderSketchDrawSketchHandlerAttorney. This is intentional to keep coupling under control. However, generic
functionality requiring access to the Attorney can be implemented in DrawSketchHandler and used from its derived classes
by virtue of the inheritance. This promotes a concentrating the coupling in a single point (and code reuse).
EditModeCoinManager:
- Refactor of updateConstraintColor
- Multifield - new struct to identify a single element in a multifield field per layer
- Move geometry management to delegate class EditModeCoinGeometryManager
- Remove refactored code that was never used in the original ViewProviderSketch.
CommandSketcherBSpline:
- EditModeCoinManager automatically tracks parameter change and triggers the necessary redraw, rendering an explicit redraw obsolete and unnecessary.
Rebase on top of master:
- Commits added to master to ViewProviderSketch applied to EditModeCoinManager.
- Memory leaks - wmayer
- Constraint Diameter Symbol - OpenBrain
- Minor bugfix to display angle constraints - syres
Architecture Description
=======================
* Encapsulation and collaboration - restricting friendship - reducing public interface
Summary:
- DrawSketchHandler to ViewProviderSketch friendship regulated via attorney.
- ShortcutListener to ViewProviderSketch friendship regulated via attorney.
- EditModeCoinManager (new class) to ViewProviderSketch friendship regulated via attorney.
- ViewProviderSketch public interface is heavily reduced.
In further detail:
While access from ViewProviderSketch to other classes is regulated via their public interface, DrawSketchHandler, ShortcutListener and EditCoinManager (new class) access
to ViewProviderSketch non-public interface via attorneys. Previously, it was an unrestricted access (friend classes). Now this interface is restricted and regulated via attorneys.
This increases the encapsulation of ViewProviderSketch, reduces the coupling between classes and promotes an ordered growth. This I call the "collaboration interface".
At the same time, ViewProviderSketch substantially reduces its public interface. Access from Command draw handlers (deriving from DrawSketchHandler) is intended to be restricted to
the functionality exposed by DrawSketchHandler to its derived classes. However, this is still only partly enforced to keep the refactoring within limits. A further refactoring of
DrawSketchHandler and derivatives is for future discussion.
* Complexity and delegation
Summary:
- Complexity of coin node management is dealt with by delegation to helper classes and specialised objects.
In further detail:
ViewProviderSketch is halved in terms of code size. Higher level ViewProviderSketch functions remain
* Automatic update of parameters - Parameter observer nested classes
Summary:
- ViewProviderSketch and CoinManager get their own observer nested classes to monitor the parameters relevant to them and automatically update on change.
The split enables that each class deals only with parameters within their own responsibilities, effectively isolating the specifics and decoupling the implementations. It is
more convenient as there is no need to leave edit mode to update parameters. It is more compact as it leverages core code.
More information:
https://forum.freecadweb.org/viewtopic.php?p=553257#p553257
===================================================
This commit is an independent refactor of the identifications used at Sketcher level.
It introduces a new type "GeoElementId" as a combination of GeoId and PointPos.
It moves the Undefined GeoId, previous Constraint::GeoUndef to GeoEnum, together with all
other fixed values of GeoIds.
=================================================================
Common utility functions used by almost all Command classes were previous in Constraint.h.
Aside from providing a very bad intent, it created unnecessary header dependencies.
This commit separates these common functions into a new header, utils.h, which is then
used in all command classes where it is necessary.
=====================================
Rectangular Array gets a snap mode every 10 degrees when pressing CTRL (for consistency with Multiline arc, which also snaps using CTRL).
Request:
https://forum.freecadweb.org/viewtopic.php?p=535691#p535691
Fixes#0004478: Active constraint tool blocks sidebar tasks from working.
Many commands are interrupted by the existence of a handler. Rather than having these commands silently cancel, purge the handler if a command executes that does not need it.
When right-clicking on an item in the Constraint Task sidebar, any current operation is cancelled and the FreeCAD selection is synced with the selected items in the constraints QListWidget. This allows all of the menu items in the context menu to function properly: if the selection is not synced, anything that relies on the FreeCAD selection (like Delete) will sillently fail.
Also clean up linespacing and whitespaces to make the code more
readable. Extremely long lines are broken to be 80 to 100 characters
long when possible.
'DrawSketchHandlerCopy' and 'DrawSketchHandlerRectangularArray'
are de-indented so that they start at column 1.
New SVG icons, `Sketcher_DeleteConstraints`, `Sketcher_DeleteGeometry`
for two commands which previously used the very simple icon
`Element_SelectionTypeInvalid` (a single red X).
These icons clarify that the commands are used to delete
the constraints and the geometry, respectively.
Found via `codespell -q 3 -L aci,ake,aline,alle,alledges,alocation,als,ang,anid,ba,beginn,behaviour,bloaded,byteorder,calculater,cancelled,cancelling,cas,cascade,centimetre,childs,colour,colours,commen,currenty,dof,doubleclick,dum,eiter,elemente,feld,freez,hist,iff,indicies,initialisation,initialise,initialised,initialises,initialisiert,ist,kilometre,lod,mantatory,methode,metres,millimetre,modell,nd,noe,normale,normaly,nto,numer,oder,orgin,orginx,orginy,ot,pard,pres,programm,que,recurrance,rougly,seperator,serie,sinc,strack,substraction,te,thist,thru,tread,uint,unter,vertexes,wallthickness,whitespaces -S ./.git,*.po,*.ts,./ChangeLog.txt,./src/3rdParty,./src/Mod/Assembly/App/opendcm,./src/CXX,./src/zipios++,./src/Base/swig*,./src/Mod/Robot/App/kdl_cp,./src/Mod/Import/App/SCL,./src/WindowsInstaller,./src/Doc/FreeCAD.uml`
The link support means that an object can now appear in more than one
places, and even inside a document different from its own. This patch
adds support for in-place editing, meaning that the object can be edited
at correct place regardless where it is.
See [here](https://git.io/fjPIk) for more info about the relavent APIs.
This patch includes two example of modifications to support in-place
editing. One is the ViewProviderDragger, which simply adds the dragger
node to editing root node by calling
View3DInventorViewer::setupEditingRoot(dragger). The other much more
complex one is ViewProviderSketch which calls setupEditingRoot(0) to
transfer all its children node into editing root. ViewProviderSketch
also includes various modifications to command invocation, because we
can no longer assume the active document is the owner of the editing
object.
This patch also includes necessary modification of the 'Show' module to
support in-place editing.
