==================================
As a way to lock a line to hyperbola tangency to a branch has not been identified, this tangency is implemented
by adding a point at the tangency point in order to avoid the jumping.
======================================================================
1. SketchObject::arePointsCoincident upgraded to check for indirect coincidence.
2. Coincidence constraint creation now checks for indirect coincidences and avoids
creating redundant coincidence constraints (for example during box selection).
=======================================
- Fixing toggle AutoUpdate Mode
- Fix Auto-Update Sketcher tools
- Fix missing createGeo recomputes
- Missing constraints recomputes fixed
Various fixes for non-Update mode:
- Fixes lack of update upon entering a conflicting datum constraint.
- Fixes lack of update upon setting the reference/driving status of a constraint
- Added tooltips to buttons
======================================================================================
There is a checkbox, default disabled, that makes the commands NOT to generate a recompute after each.
This means that if you are editing a sketch that is used to generate a pad or pocket, if the checkbox is
disabled, the dependent objects do not get recomputed.
There is a button next to it to force a manual recompute, in case it is needed.
If the user wants the previous behavior, he only needs to activate the checkbox. The previous status of the box
is restored upon entering a sketch in edit mode.
It is remarkable the case of the Fillet and Trim
On changing ActSketch (solvedSketch) to SketchObject and making movePoint not systematically update the geometry, the solving in MovePoint was confronted with solving for "the last solved geometry",
which is the default behaviour, in some situations (Fillet and Trim) where geometry had changed at SketchObject level, and was the subject of the moving actions.
MovePoint has been updated to take an extra optional parameter, to force the change in solved geometry in those situations.
Some other minor bug also fixed in Fillet creation in CommandCreateGeo.cpp
This commit also introduces conditional recompute on some operations of:
- constraints
- geometry creation (reubication of update active to comprise the autoconstraints within a single UpdateActive)
=======================================================================================
ActSketch in ViewProvider dissapears. The temporal sketch (sketch.cpp) for solving is now a data member of SketchObject.cpp (hereinafter solvedSketch). All the solving is concentrated in SketchObject.cpp.
SketchObject provides an interface to expose its solver, as it is still currently needed for some UI operations from ViewProviderSketch, like dragging points (solving rubber bands).
ViewProviderSketch still can select whether to draw the solvedSketch geometry (previously ActSketch) geometry (UI staff) or the SketchObject geometry. Performancewise, it makes sense to separate this two
geometries, as the SketchObject one involves modifying the Geometry and Constraint Properties (including all the undo related functionality), which would mess the undo functinality and incur in a big
peformance penalisation while dragging. One characteristic of solvedSketch is that its geometry is solved, whereas the geometry of SketchObject may not have been solved yet.
These geometries may differ at for the following reasons:
1. The geometry corresponds to an ongoing dragging operation, so solvedSketch has the last calculated dragging geometry, while SketchObject has the one corresponding to initial position.
2. Geometry/constraints were added to the sketch, but no solve/execute was triggered yet (envisioned situation is the future group creation functionality not in this commit).
What do I gain?
- Inserting a (simple) geometry element now costs 1 solver execution.
- Inserting a constraint now costs 1 solver executions.
For reference, in previous versions inserting a constraint involved 5 solver executions.
The following information provide a historical review of the coding of this commit (formed of 10 squashed commits):
This is a general sketch solve call reduction, not only during geometry creation (this commit does not include until here any specific measure to reduce calls on geometry creation, that is another branch)
After a lot of profiling, it seems that the "cause"(tm) that creates so many solver calls is that every update generates a solving in ViewProviderSketch, regardless of the need for that update,
many times with the only aim of providing the DoF for the message dialog and keeping ActSketch in sync with SketchObject in case it is needed (currently UI moving points, constraints,...).
Sketch solver is now a data member of SketchObject instead of a temporal object that gets initilized and destroyed.
This allows:
1. Potentially more synergy reducing calls to setUpSketch (still to be seen, still to be optimized)
2. Allowing SketchObject to access the latest geometry that has been solved => In future, allow objects that use SketchObject to obtain the latest
solved geometry instead the geometry of SketchObject that may still be unsolved. This is relevant for drawing the geometry
No more solving in ViewProviderSketch. Solving a Sketch is now an exclusive competence of SketchObject.
There is however a lot of cleaning to do in ViewProviderSketch
(I mean, not that these commits are making a mess in VPSketch,
but that as a consequence of the changes, it should be possible to
optimize VPSketch, specially moving and drawing methods)
Very useful comment for future developers that may wonder why a solve per constraint just upon addition is necessary.
Added a new function to get the size of the geometry of the instance of the solver object (Sketch.cpp).
The previous way was to extract the geometry, which is costly and error prone, as you have to delete it afterwards.
Inserted comment about the necessity of triggering a Part2D update during edit mode
==================================================================================
Geometry button:
- if no object selected, the legacy toggle icon has a new functionality, switch to/from creating in construction mode
- if object selected, it has the legacy functionality
- the button can be clicked during "continuos creation mode" to switch from creating to/from creating in construction mode
Constraint button:
- The button is not selectable if nothing is selected (it would be impossible to determine the effect)
- When constraints are selected, the button toggles the constraints to/from Driving.
- When geometry is selected, the button switches from/to reference mode, the change is apparent from the color of the constraint icons.
Continuous creation mode:
- Default changed so that it is active unless you change it in settings
Updated terminology
======================================================================
- Changing from Driving to reference does not include unnecessary solvings.
- Added some checks to avoid making Driving constraints when calling directly from python and involving only external geometry (would give redundant constraints).
- New python command toggleDriving to just change the status from reference to Driving
- New UI toolbar Command to toggle constraints
- Fix to allow switching from/to construction mode during continuous mode creation.
- Enable/Disable for constraints in constraints widget has changed to operate on multiselection and now effects "toggle" instead of enable/disable.
- Disable the option to directly create a SnellsLaw non-driving constraint (this constraint does not support direct creation, it can be toggled to non-driving after creation though).
===================================================================
It allows to create constraints directly into Reference or Driving mode.
It does not include icons
====================================================================================
It allows to enable and disable a constraint in the constraint list.
When disabled, the constraints current value is shown, but its value is not enforced (it is driven by the other constraints and user interaction).
A disabled constraint can be enabled (as far as it is enforceable, see non-driving constraints to external geometry below).
The sketcher functionality has been extended to support non-driving constraints to external geometry elements. This were previously excluded from
the possibility of creating a constraint on them (as their values depend on other sketches and would be redundant with the unchanged value or conflicting when value is changed).
Now these constraints are created as non-driving, but as they are not enforceable, the UI does not allow you to make them driving.
The constraint filter has been extended to include a Non-Driving constraints category.
Thanks again to Werner for his continuous support, and specially in this case to DeepSOIC, as he pointed towards a much better implementation solution than my original idea.
========================================================================================
How to replicate:
1. Go to Preferences->Display->Sketch and disable that checkbox.
2. Create a distance constraint (radius, distance, ...)
It will ask for the value regardless of whether the checkbox is clicked or not.
Why?
In SketcherSettings.ui the prefpath is "Mod/Sketcher"
The code refered to ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/Mod/Sketcher/General");
Fixes a bug where an arc, ellipse, or arc-of-ellipse, being reversed in
XY plane, behaved badly in sketcher (see forum thread "Sketch: how to
handle reversed external arcs?"
http://forum.freecadweb.org/viewtopic.php?f=10&t=9130 ).
Also fixes a problem with rotated arcs (see forum thread "Rotating Arc
in Sketcher"
http://forum.freecadweb.org/viewtopic.php?f=22&t=9145#p74262 ).
This is done by adding an emulation flag to a few methods in
Part::GeomXXX, which makes the shape to pretend being non-reversed
(CCW). This causes endpoints of reversed arcs of circles lineked as
external geometry to swap, causing broken sketches sometimes.
Fix AngleViaPoint to support new derivative calculation technique.
OpticConstraints: Adding Snell's law. Fix AngleViaPoint to support new derivative calculation technique.
Snell's law constraint added to GCS, but not yet exposed and cannot be
tested.
Since the way CalculateNormal() returns derivatives had changed,
AngleViaPoint constraint needed modifications. Nothing serious.
OpticConstraints: SnellsLaw progress
Addable through python. Fix math. Some quick-and-dirty visual stuff to
get rid of hangs and to see the constraint in action.
OpticConstraints: SnellsLaw: flipping logic fix
OpticConstraints: SnellsLaw progress
Added toolbar button. Allowed editing a datum by doubleclick. New error
message approach during constraint creation.
OpticConstraints: SnellsLaw
OpticConstraints: SnellsLaw: list label improvement
OpticConstraints: SnellsLaw: fix after rebase
OpticConstraints: SnellsLaw: expose helper constraints
Snell's law internally is made of three constraints: point-on-object,
coincident and the Snell's sin/sin. They were all buried under one UI
constraint. Exposing them allows to construct reflection and
birefringence on the point (attempting to do so used to result in
redundant constraints and was often not functional at all).
This commit breaks compatibility with older files.
OpticConstraints: SnellsLaw: small refactor of math
Placing the duplicated code of error and gradient calculation into a
private method.
OpticConstraints: SnellsLaw: fix datum edit unit
OpticConstraints: SnellsLaw: fix datum edit bug
After previous fix, the dimensionless value was not accepted (the
constraint's value did not change, the changes were ignored).
AngleViaPoint: fixes in UI routines + new messages
Goofed undo message in tangency via point is fixed.
Forgotten updateActive, clearSelection have been added.
New more informative error messages for tangent constraint.
AngleViaPoint: using it instead of via line tangency
* replaced the helper construction line for ellipse-to-ellipse and
similar tangency with a point. Using tangent-via-point there
* deleted tangency via line for point-to-point on
(cherry picked from commit 9e3fa8c8de0f49c0ef3c978e015eb905358dbdd9)
AngleViaPoint: internal/external tangency locking
*Added automatic tangency type lockdown for all new constraints (only
for point-wise tangency).
Tangency type is stored in the constraint datum field, as an angle value
shifted by Pi/2 (to be able to treat 0.0 as undefined type).
Added ability to switch the tangency by setting datum value from python
(can be abused by passing arbitrary angle).
Further simplified the tangency related code in Sketch.cpp.
AngleViaPoint: added license to Geo.cpp
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: using for endpoint perpendicularity
+ direction lockdown, just as with tangency.
+ quite a lot of old code is gone because of that
AngleViaPoint: perp-ty UI routine made similar to tangent
(Git has made a very messy diff.)
The changes are:
* Perpendicularity-via-point (3-element selection) support added.
* Endpoint-to-curve and endpoint-to-endpoint supports all shape
combinations.
* a bit of code cleanup and clarifications.
AngleViaPoint: placement of perpendicular icon in 3d view
AngleViaPoint: fix: allow setDatum of perpendicular constraint
AngleViaPoint: fix: centers of ellipses are not endpoints
isSimpleVertex used to return false for centers of ellipses and arcs of
ellipses, which made them being accepted for point-to-point tangency.
Should be fixed forever, mo more changes are expected to be necessary
for new types of geometry.
AngleViaPoint: precalc with OCC (work in progress)
Work in progress (not yet working).
Using OCC's tangent to replace implementation of
SketchObject::calculateAngleViaPoint.
AngleViaPoint: fix math: normal now points inwards, where it was intended initially and goofed up.
AngleViaPoint: adding comments to the code
AngleViaPoint: using GeomCurve::closestParameterToBasicCurve for angle precalculation
AngleViaPoint: Py method: changeConstraintsLocking
changeConstraintsLocking(True) - locks/re-locks all lockable
tangency/perpendicularity constraints of the sketch (applicable to
existing sketches).
changeConstraintsLocking(False) - removes locking information from
lockable constraints
AngleViaPoint: final SketchObject::calculateAngleViaPoint
Now, finally, using OCC functionality (thanks Abdullah!), without
composing temporary Sketch object.
Solver iteration limit independent of system size (reduces hangs when
solver fails to converge).
Repaint() instead of update() to force render for every movePoint.
Sketcher: New Constraint AngleViaPoint
* Adding generic CalculateNormal() method
* Reconfiguration of GCS geometry classes: adding a base class "Curve",
that has a pure virtual function CalculateNormal().
* Initial inplementation of the new function.
* adding Vector2D class (I wanted to reuse the existing, but got wierd
compile errors, so implemented a new one... TODO.)
* Adding redirection support into GCS shapes. Adding a Copy method to
GCS::Curve.
* Automatic point-on-object
* Angle precalculation: when AngleViaPoint is added, angle is properly calculated based on
existing geometry.
* Added tangency-via-point using one.
* Implemented placement of tangency-via-point icon in 3d view. Also
affected is the placement of point-on-object icon (since it is very
similar code, it is now shared with tangency-via-point)
* Placement and moving of angle datum
Functions: calculateAngleViaPoint, isPointOnCurve,
calculateConstraintError exposed to python
* Endpoint tangency: All endpoint-to-endpoint and endpoint-to-curve tangency now works
through AngleViaPoint constraint and obsolete code clean up (most procedures
addConstraintTangentXXX2YYY)
