- reverts commit d296732d - the scaling it correct
- there is a bug in Elmer that the heat source is not aware of the scaling
- write the scaling directly to the solver, not to the mesh itself. (make in principal no difference but we are closer to the solver)
- currently for Z88 nothing happens when clicking the Edit button in the solver task dialog. The reason is that opening *.txt files was never implemented
- also do this for Elmer
- for Z88 we need to open several file for a proper editing because the solver info is distributed over these files
- it turned out that despite not mentioned in the manual, ElmerGUI adds the Stabilize setting for all setups
-> bring "Stabilize" back for all equations
(for "Bubbles" it is correct that this is an equation-specific setting)
- enable the disabled options. They work and are according to the Elmer manual. The user is free to use them or not and since they are all False by default, existing analyses won't be affected.
- add two missing settings
- for new equations, enable at least one calculation, otherwise nothing will happen when an inexperienced user uses the default
- the mesh scaling was a hack to work around the fact that FC's mesh is in mm while all input units are in SI. It turned out that this made more problems than it solved because Elmer checks the length unit and makes internal recalculations. So the mesh must not be scaled when send to Elmer (despite the ElmerGrid docs doesn't state this).
forum thread: https://forum.freecadweb.org/viewtopic.php?p=614162#p614162
- for BiCGstabl the minimal degree is 2, but 3 is recommended
- when adding the equation, it should do something, therefore enable the calculation of the principal stresses (as it was, nothing was calculated except of the displacement)
- while for CCX we output the eigenfrequency, for Elmer the user had to perform the calculation of a sqrt of the complex result.
This is inconvenient and error-prone and also requires the knowledge where the result is output by Elmer and in what format. (cast me more than an hour to find this out)
Therefore perform the calculation for the user and output the result.
- when the binary was not found, the function called the non-existing binary
- also push error message to the status info so that user gets feedback also when report view console is not shown
- when the binary was not found, the function called the non-existing binary
- also push error message for Elmer and Z88 to the status info so that user gets feedback also when report view console is not shown
- uniform wording to 'binary'
- avoid unnecessary console output
- this needs proper testing, especially on a non-Windows system
- note that for some tasks multi-threading requires non-standard additional solvers like MUMPS. Ideally the user should be informed about this, depending on the equations he uses. But this should not block this PR, meaning to use multi-threading in general.
- for Elmer and Z88 on Windows several windows pop up (console windows). This is maybe annoying and the user is wondering what is going on, but the main problem is that when you close them, you break the solving process.
Therefore, on Windows only, hide the empty popup windows.
In Elmer there was errors "Viscosity not found" if used mixed solid and flow calculation.
This fix disables Stokes-Navier eruation for Solid objects.
modified: src/Mod/Fem/femsolver/elmer/writer.py
- we must not hardcode the number of coincidence vector places
The user must have a chance to change this setting for the iterative solvers according to the Z88 docs.
We use as default the number Z88 uses in its distributed example.
- we must not hardcode the number of stiffness matrix places, especially not for the Cholesky solver
The user must have a chance to change this setting in case of a solver error. This is also according to the Z88 docs that says it is a two step process:
- the solver first computed the necessary places
- the user must set the value accordingly in case it is too low
- also some code style fixes
- especially don't hardcode the choly solver that fails quickly for finer meshes
- setting sorcg as default since it shows the best performance with the cantilever tests
- since we use consistently SI units (as recommended my the Elmer forum), we need to scale the input mesh (we use ElmerGrid that has an option fur this purpose)
- Since the result will be in the scaled mesh, we need to scale it back
With this PR, one gets now correct result independent of
- the used unit scheme
- the simulation type (electrical or thermo-mechanical)
- fixes#6604
as it was, Elmer was almost unusable because most values were input with wrong units to Elmer.
Elmer uses pure SI units
ToDo: fix the still wrong Vacuum permittivity
Found via `codespell -q 3 -L aci,ake,aline,alle,alledges,alocation,als,ang,anid,apoints,ba,beginn,behaviour,bloaded,bottome,byteorder,calculater,cancelled,cancelling,cas,cascade,centimetre,childs,colour,colours,commen,connexion,currenty,dof,doubleclick,dum,eiter,elemente,ende,feld,finde,findf,freez,hist,iff,indicies,initialisation,initialise,initialised,initialises,initialisiert,inout,ist,kilometre,lod,mantatory,methode,metres,millimetre,modell,nd,noe,normale,normaly,nto,numer,oder,ontop,orgin,orginx,orginy,ot,pard,parms,pres,programm,que,recurrance,rougly,seperator,serie,sinc,strack,substraction,te,thist,thru,tread,uint,unter,vertexes,wallthickness,whitespaces -S ./.git,*.po,*.ts,./ChangeLog.txt,./src/3rdParty,./src/Mod/Assembly/App/opendcm,./src/CXX,./src/zipios++,./src/Base/swig*,./src/Mod/Robot/App/kdl_cp,./src/Mod/Import/App/SCL,./src/WindowsInstaller,./src/Doc/FreeCAD.uml,./build/doc/SourceDocu`
