Introduced FLOAT_EPSILON for robust floating point comparisons, resolving cases
where Z axis retract moves were missing after geometry recompute in 3D Surface
rotational scan operations. This prevents precision errors from causing the
cutter to skip intended lifts between rings or scan lines.
src/Mod/CAM/Path/Op/Surface.py
- Added FLOAT_EPSILON constant
- Updated Z move comparison logic to use tolerance
CAM/App/PathSegmentWalker.cpp
- Add G74 to drill/tap/bore G-code recognition for tapping cycles
CAM/InitGui.py
- Move CAM_Tapping command behind experimental feature flag
- Only group drilling/tapping commands if both are enabled
CAM/Path/Base/Generator/tapping.py
- Add pitch and spindle_speed parameters to tapping.generate
- Output S (spindle speed) and F (pitch) in generated G-code
CAM/Path/Op/Tapping.py
- Require Pitch property for tap tools and SpindleSpeed for tool controllers
- Pass pitch and spindle speed to tapping.generate
- Use SpindleDirection to determine right/left hand tap
CAM/Path/Post/scripts/linuxcnc_post.py
- Handle G84/G74 tapping cycles: convert pitch and spindle speed to feed rate
- Remove F and S from output and recalculate F as needed
CAM/Path/Tool/shape/models/tap.py
- Add Pitch property to ToolBitShapeTap schema
- CAM/Path/Tool/toolbit/models/tap.py
- Show pitch and rotation in tap tool summary
- Use is_imperial_pitch to format pitch as TPI or mm
CAM/Path/Tool/toolbit/util.py
- Add is_imperial_pitch utility to classify pitch as imperial or metric
CAM/Tools/Bit/375-16_Tap.fctb
- Remove unused parameters (Coating, Rotation, TPI, Type)
- Keep only relevant tap parameters for new schema
* CAM: fix G0 regression in drilling
At some point the initial rapid to Safe Height got dropped from drilling cycles.
This leads to excessive air drilling.
It also alters "OLD_Z" which sets the Retraction plane under G98.
The defect is causing much confusion and time wasting in the roadmap discussions
This PR fixes the G0 regression.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* [CAM] extract tool controller ui elements into their own file
* [CAM] make the changes in the tool controller UI only apply when ok is clicked
* [CAM] Add tool controller edit panel to the Profile operation
* [CAM] Add copy button to in-operation tool controller editor
* [CAM] clean up changes
* [CAM] Add tool controller edit UI to all operations
Notes on changes that were not a simple copy/paste job from the changes
I made for Profile:
- Deburr: changed TC/coolant rows from 1 and 2 to 0 and 1
- Probe: didn't work at all initially due to bug in main where ShapeName
changed to ShapeType. I added a utility for reading either a ShapeType
or a ShapeName (check for both properties, convert ShapeType to lower
case) and applied it to probe and camotics
- Drilling: moved Keep Tool Down checkbox up from row 8 to row 2 (all
intermediate rows were missing) and added the edit checkbox in row 3
below it
- VBit, Probe (or anything else that requires a specific tool type): in
Base.py setupToolController(), I added a check to see if the currently
selected tool is an invalid type, and if so and there is a valid tool,
then change to that one. This fixes two UI bugs. Plausibly pre-existing,
if there is one valid tool and an invalid tool is selected, it's
impossible to switch to the valid one because you can't generate a combo
box change event for the new tool. Definitely new: if an invalid tool is
selected and there are no valid tools, the combo box will be empty but
the new tool controller edit utility will let you edit the current TC
anyway.
- Thread Milling: replaced the Tool Controller GroupBox with the
standard QFrame layout, and added the checkbox. Note that this
operation doesn't have a UI element for coolant -- likely a bug, but I
didn't look into it
- Surface: Changed from form layout to grid layout. Deleted an old
SurfaceEdit.ui file -- it was replaced with PageOpSurfaceEdit.ui in
2017 but not deleted (commit 8637831132)
- Waterline: Changed from form layout to grid layout
* [CAM] Bug fixes
setupUi() wasn't called on the tool controller editor, preventing
changes in its UI from being written back to the object immediately.
This caused weird behavior where if you edited a field twice it would
reset the second time it was focused
Added a hook to automatically update the TC combo box when the TC name
(or anything else about it, since that was easier) changes
* Fix usage of QSignalBlockers
* [CAM] Block scroll events on tool number and spindle direction when not
focused
Specifically, if you mouse over either of these UI elements and use the
scroll wheel, it used to focus the element and change its value. This
commit makes it do neither of those things, for these specific elements,
as a measure against users accidentally changing these values.
* disable tcNumber edit field in operations panel
* Add "New tool controller" option to TC combo box
When selected, it opens (toggles, technically) the tool bit dock and
returns to the previous selection. Adding a new tool controller using
the dock (already, before this commit) automatically switches the
operation's tool controller to the new one
* Add "Copy" option to tool controller combo box
* Copy TC function only in combo box, no button
* [CAM] update in-operation "new tool controller" function to use a dialog
* [CAM] make the tool selector always a dialog and never a dock
* remove spacer from ToolControllerEdit.ui to fix exces white space
* [CAM] change tool dialog default sizing/spacing
* [CAM] fix bug where copying tool controller doesn't copy all values
* Refactor slot op.
Move out of experimenation features
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Incorporate Hyarion's suggestions
* Update src/Mod/CAM/Path/Op/Slot.py
Co-authored-by: Benjamin Nauck <benjamin@nauck.se>
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Benjamin Nauck <benjamin@nauck.se>
