CAM/App/PathSegmentWalker.cpp
- Add G74 to drill/tap/bore G-code recognition for tapping cycles
CAM/InitGui.py
- Move CAM_Tapping command behind experimental feature flag
- Only group drilling/tapping commands if both are enabled
CAM/Path/Base/Generator/tapping.py
- Add pitch and spindle_speed parameters to tapping.generate
- Output S (spindle speed) and F (pitch) in generated G-code
CAM/Path/Op/Tapping.py
- Require Pitch property for tap tools and SpindleSpeed for tool controllers
- Pass pitch and spindle speed to tapping.generate
- Use SpindleDirection to determine right/left hand tap
CAM/Path/Post/scripts/linuxcnc_post.py
- Handle G84/G74 tapping cycles: convert pitch and spindle speed to feed rate
- Remove F and S from output and recalculate F as needed
CAM/Path/Tool/shape/models/tap.py
- Add Pitch property to ToolBitShapeTap schema
- CAM/Path/Tool/toolbit/models/tap.py
- Show pitch and rotation in tap tool summary
- Use is_imperial_pitch to format pitch as TPI or mm
CAM/Path/Tool/toolbit/util.py
- Add is_imperial_pitch utility to classify pitch as imperial or metric
CAM/Tools/Bit/375-16_Tap.fctb
- Remove unused parameters (Coating, Rotation, TPI, Type)
- Keep only relevant tap parameters for new schema
