* Update Sketcher toolbar UIs.
Group all create tools for arcs, conics.
Group toggle driving/active constraints.
Update arrangement of icons.
* Change default to unified coincidence tool.
=====================================================
Enforce strong typing to avoid all kinds of abusive implicit conversionsm, the corresponding associated bugs and make code more readable.
==========================================================
This commit turns the remaining blocking pop-ups in which the user can only click "ok"
into non-intrusive notifications, depending on the user preferences in settings.
=========================================================================
Forum:
https://forum.freecad.org/viewtopic.php?p=677304#p677304
A common operation is to toggle a group of geometry to/from construction. This happens often
in connection with carbon copy operations.
When this happens, geometry is often selected using box selection.
If there are geometry points (which are generally construction), and selection box is used, this
results in construction points being toggled to normal defining mode. This situation is undesirable
in 99% of the cases. It requires to reselect only the points and toggle them back.
When construction points need be made defining geometry (for example to use them as attachments), the
general workflow is to select only those points and toggle them.
In order to improve the efficiency, it has been decided to provide a special behaviour for construction
toggling:
1. Vertices will only be toggled to/from construction IF ONLY vertices are selected.
2. If there is a mixture of edges and vertices, vertices will be ignored during the toggling operation.
=================================================================
Common utility functions used by almost all Command classes were previous in Constraint.h.
Aside from providing a very bad intent, it created unnecessary header dependencies.
This commit separates these common functions into a new header, utils.h, which is then
used in all command classes where it is necessary.
while constructing I miss often that one cannot insert directly rounded rectangles. As it is, one needs first to insert a rectangle, then go to fillet mode, then click 4 times, then set equal constraint, then often also replace the vertical/horizontal constraints since a rectangle must not necessarily be parallel to a sketch axis
As solution this PR adds rounded rectangles in one step. This saves a lot of time since this object is e.g. often used for milled rectangular pockets, for 3D-printed pads etc.
As discussed I grouped the rectangle and rounded rectangle.
Renamed Sketcher_AlterConstruction.svg to
Sketcher_ToggleConstruction.svg, and renamed the original
Sketcher_ToggleConstruction.svg to Sketcher_ToggleConstruction_old.svg
as per the directions of vocx in this forum post:
https://forum.freecadweb.org/viewtopic.php?f=21&t=42131&p=357725#p357725
The link support means that an object can now appear in more than one
places, and even inside a document different from its own. This patch
adds support for in-place editing, meaning that the object can be edited
at correct place regardless where it is.
See [here](https://git.io/fjPIk) for more info about the relavent APIs.
This patch includes two example of modifications to support in-place
editing. One is the ViewProviderDragger, which simply adds the dragger
node to editing root node by calling
View3DInventorViewer::setupEditingRoot(dragger). The other much more
complex one is ViewProviderSketch which calls setupEditingRoot(0) to
transfer all its children node into editing root. ViewProviderSketch
also includes various modifications to command invocation, because we
can no longer assume the active document is the owner of the editing
object.
This patch also includes necessary modification of the 'Show' module to
support in-place editing.
===============================================
It is a long felt need that redundant constraints are not generated while autoconstraining.
The solver sketcher in v0.17 is überpicky with redundants due to the new popularity contest algorithm. The former behaviour is exhacerbated.
This new mode enables automatic redundant constraint removal.
In UI operations IN EDIT MODE, upon detection of redundancy by the solver, the Sketcher will remove all redundant constraints detected by that solve.
This makes the sketcher much less annoying.
How to test this?
The easiest example is to create a vertical line. Then make the endpoints symmetric with respect to the horizontal axis. Without this mode,
the vertical constraint and the symmetry constraint are redundant. With this mode, the vertical constraint gets automatically removed by the Sketcher.
=======================================
- Fixing toggle AutoUpdate Mode
- Fix Auto-Update Sketcher tools
- Fix missing createGeo recomputes
- Missing constraints recomputes fixed
Various fixes for non-Update mode:
- Fixes lack of update upon entering a conflicting datum constraint.
- Fixes lack of update upon setting the reference/driving status of a constraint
- Added tooltips to buttons
