- as discussed in https://github.com/FreeCAD/FreeCAD/pull/7642 the backwards compatibility for deprecated holes was already lost since FC 0.19
- this PR removes the deprecated types and transform holes created with FC 0.19 or 0.20 to the corresponding countersinks/counterbores.
- also add Counterdrill for translations
The counterbore is basically a special case of the countersink
with a countersink angle of 180 degrees and applied depth.
Handling it that way elimintaes some duplicate code and adds the ability to
combine countersinks and counterbore to form a counterdrill.
The sanity check on countersinkAngle can be safely dropped as it is ensured
by a constraint on the property itself.
- by default there is no hole head cut and therefore its parameter must be initialized as read-only (will be enably when user sets a head cut)
- also fix a typo
- also fix a UI file issue (automatically done by Qt Designer)
- The thread must not be deeper than the hole.
(One could see that if one used a thread depth dimension and set
it to the same value than the hole depth, the thread was too deep.)
- actually use specified thread depth, fixes issue reported here: https://github.com/FreeCAD/FreeCAD/pull/4274#issuecomment-997787744
- fixes 2 UI enabling issues
- the thread depth cannot be longer than the hole depth
- the hole cannot be deeper than the through-all depth
- Thread runout according to DIN 76-1
- Through all length updated to be calculated based on bounding box
- New properties: ModelThread, ThreadDepthType, ThreadDepth,
UseCustomThreadClearance, CustomThreadClearance
- Rename Old but unused parameters related to thread modeling.
- Functionality exposed in UI
The "angle" variable was not being initialized in any of the
constructors for the CutDimensionSet, and nothing was being initialized
by the default constructor. This commit adds angle as an optional final
argument to the parameterized constructors, defaulting to 0.0, and adds
default values to the default constructor using the first of each enum
and 0.0 for the angle. The default constructor is required elsewhere in
the code so cannot be trivially removed. Issue identified by Coverity.
also fix annoying variable naming - different variables representing different types should not have the same name
also update a comment according to depending PRs
This PR is based on PR #4344 and a spin-off of PR #4337. It fixes:
We have normed screw head cuts. These values can be overridden but we must store the info about the overriding. Why? - because when you have e.g. made a custom change to a normed countersink and then change to another countersink norm, you would either not get the values defined in the norm or you get these values but loose e.g. your depth settings
This PR is based on PR #4343 and a spin-off of PR #4337. It fixes:
- the bug that we did not use the normed clearance hole diameters for UTS holes
- missing recompute when changing existing hole from Metric to UTS type
This PR is the first in a series of probably 3 PRs to fix known hole dialog bugs.
This one fixes:
- the .ui file issues
- readonly status issues of some widgets/properties (e.g. when the hole is through all, disable drill point settings)
- the bug that updateHoleCutParams() overwrote the previously correctly determined hole diameter
- just a trifle: change a function name to fit into the naming scheme
as reported in https://tracker.freecadweb.org/view.php?id=3818
we treat the blind hole depth not according to the conventions. The size of the drill point due to the angle is normally not taken into account but FC does this in any case.
This PR adds therefore an option, that is by default off, to take the drill point size into account.
Without the option, (the new default) the depth is calculated according to the conventions.
The PR also removes unused widgets and restored the tab order in the .ui file. The thread parameters were never used. In case we made in future the decision to carve into holes real (modeled) threads, we need a special UI for that solution anyway so having the dead code in is not helpful at all.
These values are calculated exactly from (diameter-pitch), and are
included here only to silence warnings from some compilers about missing
initializers. These values are not (currently) used in the code, which
directly calculates the core hole as needed in this case.
- there is the ISO 273 describing clearance holes, so we need to take these values. Only if we have a size not defined in the norm, we calculate
- add the coarse (wide) type for clearance holes from ISO 273
- add all screw thread sizes defined in DIN 13/ISO 261
- rearrange thread dialog to make it more compact
- change name "fit" to "clearance" as discussed
- add tooltips to the dialog
- fix issue with TaperedAngle dialog field
- change a size name because the norms define "M1" not "M1.0"
- fix bug that custom angles were overwritten
- the norms only define screw heads, not the cut for them, so also a custom angle is possible to sink a metric screw
- use better step in UI since one changes the presets only in fractions of a millimeter (otherwise it would be a different hole size)
- handle case of no cut
- calculate change in diameter when adding depth to countersinks
