This PR adds the same functionality as provided by Part Extrude.
The used code parts are sorted out to a new helper function that is used by Part and PartDesign.
- the initialization of the length was different than the default set in Command.cpp
- it is annoying that the default 2nd length was 10 and 20 times the default for the 1st length
-> uniform and take the same than the 1st length
- the goal of the recent Pad/Pocket code refactoring was to handle Pad and Pocket the same
default Pad were 10 long, Pocket only 5 -> uniform this to 10
- the initialization of the length were different than the default set in Command.cpp
- it was annoying that the default 2nd length was 10 and 20 times the default for the 1st length -> uniform and take the same than the 1st length
* [PD] get rid of a CI compiler warning
The CI compiler outputs this warning:
FeaturePad.cpp:101:20: warning: variable 'obj' set but not used [-Wunused-but-set-variable]
Co-authored-by: 0penBrain <48731257+0penBrain@users.noreply.github.com>
* pass boolean instead of int to setValue of PropertyBool
* support of symmetric option for two-length mode
* fix bug in TaskPadParameters::updateUI()
* remove strange acronyms from method names
- as discussed here: https://forum.freecadweb.org/viewtopic.php?f=17&t=50466&start=10#p433327
this PR is the first step for new Pad features.
It implements 3 features requested by users:
1. an option to measure the pad length along its direction if there is a custom direction
2. when there are two lengths, the reverse feature should be active
3. the pad dialog shows now always the used pad direction, no matter if it is a custom one or the sketch's normal
- Furthermore there are some code improvements (avoid rounding and blocking signals)
- Also adapt TestPad.py because its test used the case two lengths + reversed but this was not possible before this PR - the reverse option was not take into account for two lengths in FeatureSketchBased.cpp)
Now it is and therefore the test must be updated:
In the test the second sketch has the normal vector 0, -1, 0. As the reverse option is set the pad direction is 0, 1, 0. So in y direction is the length (1mm) and in -y direction is length2 (2mm). This gives together with the other pad of volume 1, a total volume of 4.
- fix UI issue: either reversed or midplane
As noticed by @chennes, when the pad uses symmetric, reversed is not sensible and vice versa.
This commit fixes the missing Gui side for the case midplane is checked and the App side.
- the PR also fix two typos
It saves a lot of work if one can directly pad in any direction and OCC allows this.
This PR adds the possibility to define a custom vector for the padding direction.
-Rename Sketchbased to ProfileBased to show new behavior
-Adopt ProfileBased to make the relevant helper functions work with faces too
-Adopt features for unified use of helper functions
-Adopt commands to allow face selection
Give a massive refactoring to Task dialogs for pocket and pad.
This commit features:
* Make Task dialogs for pocket and pad look nice in side-by side diff and
cross import features missing in each other.
* As a result it fixes several minor bugs.
* Gives a rework to the UpdateUI function.
* This one also fixes offset option support and migrates it to use unit
framework.
PartDesign: make datum features work outside of body/part
PartDesign old workflow: remove a few messageboxes about no part
PartDesign: old workflow: multitransform without body
Still has visibility issues, but generally works.
