This makes order of fields in Hole Parameters more natural with typical
input flow of the parameters, i.e. moves the size of the hole more to
the top as it is the most important parameter.
* refactor: change to ternary op
* refactor: apply recommendations to widgets
* refactor: use QSignalBlocker
* refactor: address some compiler complaints
* refactor: add namespace Gui to new widgets
- by default there is no hole head cut and therefore its parameter must be initialized as read-only (will be enably when user sets a head cut)
- also fix a typo
- also fix a UI file issue (automatically done by Qt Designer)
- no keyboard tracking
- don't disable labels since we don't do this for the other dialog labels
- avoid a doubled word in subsequent labels
- further UI file changes are by Qt's Designer
- Thread runout according to DIN 76-1
- Through all length updated to be calculated based on bounding box
- New properties: ModelThread, ThreadDepthType, ThreadDepth,
UseCustomThreadClearance, CustomThreadClearance
- Rename Old but unused parameters related to thread modeling.
- Functionality exposed in UI
This PR is based on PR #4344 and a spin-off of PR #4337. It fixes:
We have normed screw head cuts. These values can be overridden but we must store the info about the overriding. Why? - because when you have e.g. made a custom change to a normed countersink and then change to another countersink norm, you would either not get the values defined in the norm or you get these values but loose e.g. your depth settings
This PR is the first in a series of probably 3 PRs to fix known hole dialog bugs.
This one fixes:
- the .ui file issues
- readonly status issues of some widgets/properties (e.g. when the hole is through all, disable drill point settings)
- the bug that updateHoleCutParams() overwrote the previously correctly determined hole diameter
- just a trifle: change a function name to fit into the naming scheme
as reported in https://tracker.freecadweb.org/view.php?id=3818
we treat the blind hole depth not according to the conventions. The size of the drill point due to the angle is normally not taken into account but FC does this in any case.
This PR adds therefore an option, that is by default off, to take the drill point size into account.
Without the option, (the new default) the depth is calculated according to the conventions.
The PR also removes unused widgets and restored the tab order in the .ui file. The thread parameters were never used. In case we made in future the decision to carve into holes real (modeled) threads, we need a special UI for that solution anyway so having the dead code in is not helpful at all.
* replaced widget with radiobuttons by button Group, to improve alignemt
of DrillPointAngle with grid-layout
* made Thread Pitch/Angle/Cutoffs widgets wider
- there is the ISO 273 describing clearance holes, so we need to take these values. Only if we have a size not defined in the norm, we calculate
- add the coarse (wide) type for clearance holes from ISO 273
- add all screw thread sizes defined in DIN 13/ISO 261
- rearrange thread dialog to make it more compact
- change name "fit" to "clearance" as discussed
- add tooltips to the dialog
- fix issue with TaperedAngle dialog field
- change a size name because the norms define "M1" not "M1.0"
- fix bug that custom angles were overwritten
- the norms only define screw heads, not the cut for them, so also a custom angle is possible to sink a metric screw
- use better step in UI since one changes the presets only in fractions of a millimeter (otherwise it would be a different hole size)
- handle case of no cut
- calculate change in diameter when adding depth to countersinks
- propose cut values also for UTS profiles
- the UTS defines coarse and fine while for ISO it is regular and fine, thus fix the name
- for the dialog: set minimum values to zero (angles etc. cannot be negative)
- initialization: thread direction only sensible if there is a thread
- initialization: hole diameter can only be changed if there is no profile
- initialization: only enable allowed hole cut parameters
- also for the ISO profiles it is allowed to countersink/bore deeper/less deep
- UI file: add some tooltips (the other changes were done automatically by Qt's designer)
