By setting a DefaultImportXXX preferences parameter under Mod/Start,
one can specify a default import module to use when clicking a .XXX
file on the Start page. This is specially useful for filetypes that
have several importers, and the Start page would not let users
choose which importer to use.
Later on if this proves useful we can set up an UI to let the user
set their preferences better.
- To speed up analyses one calculates on several CPU cores. The result is a partial VTU file.
Unfortunately when applying a transparency the boundaries of the volumes computed by each CPU core are always visible. This makes it often unusable for visualizations.
The solution is to filter the results the same way a clip filter does.
- the ViewProvider sorting of the field can be different from the sorting in the dialog
- also hide a Contours property (I forgot this when the contours filter was added)
If an exception occurs while setting up Xerces-C, make the test framework handle it.
Also add a copyright header, and try to quiet down the clang-tidy linter.
* [Arch] fix Arch_Stairs recompute issue
* Fixed the tooltips for the updated properties.
* Added warnings to the functions that updated the properties.
* Fixed a typo makeCurvedStairsWithLandings -> makeCurvedStairsWithLanding
- sort the functions alphabetically to know where to scroll to - eases the reading at least a bit
- some automatic reformatting according to our current clang file
- split too long lines
- no longer output an error on mesh from a BooleanFragments. There are cases when this fails, but other cases where one must use a BoopleanFragments compound and this works well, see https://forum.freecad.org/viewtopic.php?t=71070. Therefore a warning is sufficient.
- disable log messages not important for the average users.
- avoid code duplication
This changed is inspired by (and slightly refactors) the Array Path modifier.
It currently takes the Placement XYZ and Z Angle into consideration.
Future work could also implement rotating the path around the X and Y
axes.
Previously, the fillet started at a fixed value, tailored at 20° pressure
angle, a fillet radius of 0.375 and a dedendum of 1.25. With PR #8184
those values became user-adjustable and thus the assumptions of the
original code are not fullfilled any more. This resulted in significant
artefacts, especially for higher pressure angles or smaller dedendums as
commonly found in splines.
This commit actually calculates the junction between fillet and involute
so that the tangents of the both curves match.
The mathematical approach is described in source code comments.
The change in the fillet calculation also affects compatibility with
files generated by earlier versions of FreeCAD. Those changes are way
below 0.1% per tooth, however the earlier test required absolute equality
down to the micron. This was relaxed and also changed to a relative, per
tooth, tolerance.
There is one particular case where the new algorithm performs slightly
worse, though. That is when the fillet radius is too large to the
dedendum, i.e. resulting in a single arc instead of two fillets, and
effectively cannibalizes some of the clearance. This happens with internal
gears having less than 25 teeth. At about 15 teeth it becomes visible
that the fillet is not 100% tanget any more. However, as such a low
number of teeth is highly unusual for internal gears and the effect,
although noticeable, is minor, the overall benefits of the new algorithm
outweighs the drawbacks. And now with the fillet radius being adjustable
it is easy to fix, too.
The technical reason is that the tangency is calculated correctly, but
the fillet circle is displaced aferwards to avoid an overlap of the two
fillets. For the new fillet position, the tangents do not align any more.
