AjinkyaDahale
a881d30a70
Miscellaneous changes to constraint creation modes
...
Parallel constraints can also be made by select-then-constraint way.
Preliminary preparations for perpendicular constraint making mode.
Selection actually works when for constraints involving multiple
elements few of them are selected (thanks abdullah).
etc.
2017-01-31 17:07:45 +01:00
Abdullah Tahiri
9ec7bd4650
Sketcher: Fixing Green selection on new style constraints
2017-01-31 17:07:45 +01:00
AjinkyaDahale
a39d2545a6
Moved point on object to general constraint mode framework
2017-01-31 17:07:45 +01:00
AjinkyaDahale
643e61ccf6
Moved parallel to general constraint mode framework
2017-01-31 17:07:45 +01:00
AjinkyaDahale
180772b7ee
Moved coincident and vertical to general constraint mode framework
2017-01-31 17:07:45 +01:00
AjinkyaDahale
dad03ca347
Moved CmdSketcherConstrainLock to general constraint mode framework
2017-01-31 17:07:45 +01:00
AjinkyaDahale
4ad41e1ad1
Generalize DrawSketchHandlerGenConstraint::releaseButton
...
The select-then-constrain method has been temporarily sacrificed
2017-01-31 17:07:45 +01:00
AjinkyaDahale
99f93f357b
CmdSketcherConstraint::applyConstraint() is now used in DrawSketchHandlerGenConstraint
2017-01-31 17:07:45 +01:00
AjinkyaDahale
61324d8887
Initial commit with DrawSketchHandlerGenConstraint
...
Plus made CmdSketcherConstrainHorizontal subclass of
CmdSketcherConstraint, and made it use DrawSketchHandlerGenConstraint.
2017-01-31 17:07:45 +01:00
AjinkyaDahale
583bb48ad4
Replace All SelectionFilterGates in Constraint Modes by GenericConstraintSelection
2017-01-31 17:07:45 +01:00
AjinkyaDahale
b2c5e84e5d
Addition to CmdSketcherConstraint and GenericConstraintSelection
...
Also making CmdSketcherConstrainLock a subclass of CmdSketcherConstraint
2017-01-31 17:07:45 +01:00
AjinkyaDahale
93cb552d2f
Coincident constraint mode works on root (origin) too
2017-01-31 17:07:45 +01:00
AjinkyaDahale
3f02c72f85
Skeleton of general CmdSketcherConstraint Class
2017-01-31 17:07:45 +01:00
wmayer
0955ccf594
fix whitespaces
2017-01-20 19:22:50 +01:00
abdullahtahiriyo
3f0c9d7bc3
Merge branch 'master' into bspline_2017
2017-01-18 22:48:27 +01:00
Abdullah Tahiri
2e789dc523
Sketcher: BSpline SnellsLaw - unsupported
2017-01-15 22:34:14 +01:00
Abdullah Tahiri
f935f33345
Sketcher: BSpline point-on-object - unsupported
2017-01-15 22:29:21 +01:00
AjinkyaDahale
a588349173
Horizontal and Vertical Constraint creation modes
2017-01-15 17:00:45 +01:00
Abdullah Tahiri
6b5622a661
Sketcher: BSpline - Equality not supported user indication
2017-01-15 01:40:04 +01:00
Abdullah Tahiri
2eec558ce7
Sketcher: BSpline - UI Perpendicularity
2017-01-15 01:27:46 +01:00
Abdullah Tahiri
340d33f3a5
Sketcher: BSpline - Informing the user of non-supported tangencies
2017-01-15 00:57:05 +01:00
Abdullah Tahiri
e53dc90c9a
Sketcher: BSpline simplified endpoint tangency/perpendicularity solver implementation
...
=====================================================================================
Support for tangency/perpendicularity using angle via point for BSpline with appropriate
endpoint multiplicity so that the endpoints goes thru the first and last poles (control points).
Warning: Not applicable to periodic BSplines.
Warning: Not applicable to any non-periodic BSpline with inappropriate endpoint conditions.
2017-01-15 00:42:25 +01:00
wmayer
186b9e2edf
make code a bit more readable
2017-01-09 10:07:59 +01:00
wmayer
81e9228cf0
issue #0000753 : angle constraint auto places the constraints visuals including its value in the wrong place
2017-01-08 16:47:06 +01:00
wmayer
4efd3e894a
fix -Wunused-parameter
2017-01-04 18:20:43 +01:00
AjinkyaDahale
8e1f5364af
Coincident constraint making mode added
...
One small problem remains that the origin is not selectable as one point
in coincident constraint making mode.
2017-01-04 12:58:11 +01:00
AjinkyaDahale
75ad582913
Lock doesn't complain "no selection"
2017-01-04 12:58:11 +01:00
AjinkyaDahale
670e59eae7
Lock constraint in always available when sketch is open
...
Earlier it was available only when a selection is made
2017-01-04 12:58:11 +01:00
AjinkyaDahale
1230f493d5
Lock constraint can be applied with better selection
...
Can't yet start without selection: the button on toolbar is not active
without a selection yet
2017-01-04 12:58:11 +01:00
AjinkyaDahale
ecd1f465b0
Added DrawSketchHandlerLock
2017-01-04 12:58:11 +01:00
wmayer
cbf717f317
fix whitespaces
2016-12-28 14:22:42 +01:00
Abdullah Tahiri
9e7d86f1b8
Sketcher: Parabola perpendicularity constraint
2016-12-24 15:24:36 +01:00
Abdullah Tahiri
d8b38032cf
Sketcher: Parabola tangency support
...
===================================
Support for tangency with any preexisting supported geometry using angle via point.
2016-12-24 15:02:52 +01:00
Abdullah Tahiri
1c77657354
Sketch: Hyperbola tangency to line
...
==================================
As a way to lock a line to hyperbola tangency to a branch has not been identified, this tangency is implemented
by adding a point at the tangency point in order to avoid the jumping.
2016-11-27 18:45:33 +01:00
Abdullah Tahiri
73930c4294
Sketcher: Hyperbola perpendicularity constraint
...
=================================================
Line perpendicular to hyperbola using via point constraint.
2016-11-27 18:45:33 +01:00
Abdullah Tahiri
50ab33aeb4
Sketcher: Hyperbola Tangency to Curves
...
======================================
Implementation of the Tangency via point for all curves to Hyperbola (no line to Hyperbola yet).
2016-11-27 18:45:33 +01:00
wmayer
222e9b6b46
replace hard coded numbers with static constants
2016-10-23 13:44:26 +02:00
wmayer
15d7ae5e2c
fix -Wextra in Sketcher
2016-09-22 18:34:35 +02:00
wmayer
d39bd4906b
fix Coverity issues
2016-08-20 19:45:36 +02:00
wmayer
e4f0ddad84
Coverity issues: check return value of dynamic_cast or replace it with static_cast
2016-08-17 10:43:58 +02:00
wmayer
8f0ea2082a
make sure that action is created when calling updateAction
2016-07-02 13:19:25 +02:00
DeepSOIC
5c3024e9f8
Sketcher: negative constraint value avoidance
...
by swapping elements being constrained at creation time, should the
precalculated value happen to be negative.
2016-03-12 21:28:37 +01:00
DeepSOIC
e624a1d00d
Sketcher: never ever hide constraint value sign, anymore
2016-03-12 21:28:22 +01:00
wmayer
10786c65b8
+ support of unicode names for sketch constraints
2015-09-24 03:17:47 +02:00
Mateusz Skowroński
43a4a5938c
Fix files encoding. Go from ISO8859-1 to UTF-8.
2015-09-21 19:50:49 -03:00
Eivind Kvedalen
67800ec8c4
Sketcher: Added support for expressions.
2015-09-21 14:51:10 +02:00
wmayer
694c409caf
+ minor changes
2015-09-13 23:24:12 +02:00
Abdullah Tahiri
82e41125da
Sketcher bug/feature request: arePointsCoincident/coincidence creation
...
======================================================================
1. SketchObject::arePointsCoincident upgraded to check for indirect coincidence.
2. Coincidence constraint creation now checks for indirect coincidences and avoids
creating redundant coincidence constraints (for example during box selection).
2015-09-09 22:56:14 +02:00
wmayer
979d1299cc
+ fix various warnings with gcc
2015-09-01 19:29:39 +02:00
Alexander Golubev
bbbefaf188
Mod/Sketcher: suppress warning
...
Warning was:
src/Mod/Sketcher/Gui/CommandConstraints.cpp|1031 col 28| warning: '&&' within '||' [-Wlogical-op-parentheses]
2015-08-29 18:35:58 +02:00
