wmayer
acded1c954
save values before invalidating iterator, whitespace improvements
2018-01-27 13:09:44 +01:00
Abdullah Tahiri
94ca105315
Sketcher: Setting in Preferences to switch on/off notification of constraint substitution
...
=========================================================================================
By default notification is on, so that Newbies do not complain why FC is deleting that other constraint they have added before.
Power users generally will set it off, as they do not want to be bothered by pop ups and know what they are doing.
2018-01-27 12:33:11 +01:00
Abdullah Tahiri
620188073e
Sketcher: Avoid single tangency plus coincident when preexisting single tangency
...
================================================================================
fixes #3299 (remaining)
Draw a line. Draw an arc. Make edge to edge tangency. Select endpoints. Try to create a coincident constraint. You now get an Endpoint-to-Endpoint tangency.
2018-01-27 12:33:11 +01:00
Abdullah Tahiri
180d722a53
Sketcher: Avoid single tangency when preexisting coincident
...
==========================================================
partly fixes 3299
Draw a line. Draw an arc. Make one endpoint of each coincident. Select the line. Select the Arc. Hit tangency. You now get an Endpoint-to-Endpoint tangency.
2018-01-27 12:33:11 +01:00
wmayer
38da0c7312
improve whitespace, fix const correctness
2018-01-23 00:40:41 +01:00
Abdullah Tahiri
c7b137fe85
Sketcher: Change nomenclature relating to Block constraint
2018-01-22 22:52:56 +01:00
Abdullah Tahiri
c27d5a26b2
Sketcher: UI Block constraint creation sanity checks
...
====================================================
Avoid creation of constraints if they would lead to undesirable conflicting situations.
2018-01-22 22:52:56 +01:00
Abdullah Tahiri
9634da6811
Sketcher: Block constraint - Prevent from adding constraint if the solver has redundant/conflicting constraints
2018-01-22 22:52:56 +01:00
Abdullah Tahiri
1932a2f152
Sketcher: Blocked Constraint toolbar commands
2018-01-22 22:52:56 +01:00
luzpaz
048c787e32
Sketcher: comment typos
2017-12-25 10:59:48 +01:00
Abdullah Tahiri
4006c6ee97
Sketcher: Fixes no horizontal/vertical on edge if previous horizontal/vert aligment on vertex
...
=============================================================================================
fixes #3257
2017-12-07 11:11:40 +01:00
Abdullah Tahiri
aa43197976
Refactoring solve+recompute and reinstating initial solve+recompute behaviour
2017-08-19 17:14:27 +02:00
wmayer
2004544e57
fixes #0002710 : Freecad doesn't show sketch elements added when overconstrained
...
issue #0002836 : Crash in sketcher
2017-08-19 17:14:27 +02:00
luzpaz
81bdb1f276
Sketcher: typo fix
2017-07-24 18:21:17 -03:00
Abdullah Tahiri
40c6d4be1a
Sketcher: Vertical alignment constraint command
2017-05-01 22:39:37 +02:00
Abdullah Tahiri
cfc2d86c2e
Sketcher: Horizontal alignment constraint command
2017-05-01 22:39:08 +02:00
Abdullah Tahiri
e44208d56c
Sketcher: Lock constraint bug fix
2017-04-22 18:16:27 +02:00
Abdullah Tahiri
0aa9438c0a
Sketcher: Lock constraint relative mode and group locking
2017-04-22 18:16:27 +02:00
wmayer
c2e83c7818
consistently use term 'B-spline' in the sketcher GUI
2017-04-12 09:37:58 +02:00
wmayer
ce36b29cb7
fix scan coverity issues
2017-04-11 15:06:37 +02:00
Abdullah Tahiri
2a58ac0cf8
Sketcher: New function to reuse of python exception message text in the UI
2017-04-10 08:57:25 +02:00
Abdullah Tahiri
418beea589
Sketcher: Only Reference constraints allowable on construction points like bspline knots
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
02e370d392
Sketcher: Enable reuse of constraint helper functions in other toolbars
...
=======================================================================
bool checkBothExternal(int GeoId1, int GeoId2);
void getIdsFromName(const std::string &name, const Sketcher::SketchObject* Obj, int &GeoId, Sketcher::PointPos &PosId);
bool inline isVertex(int GeoId, Sketcher::PointPos PosId);
bool inline isEdge(int GeoId, Sketcher::PointPos PosId);
bool isSimpleVertex(const Sketcher::SketchObject* Obj, int GeoId, Sketcher::PointPos PosId);
bool IsPointAlreadyOnCurve(int GeoIdCurve, int GeoIdPoint, Sketcher::PointPos PosIdPoint, Sketcher::SketchObject* Obj);
2017-04-08 12:58:06 +02:00
wmayer
b217fe2287
set continuous constraint mode consistently to true by default
2017-02-24 16:30:13 +01:00
wmayer
a90014c646
add missing word, fix layout
2017-02-24 16:24:24 +01:00
AjinkyaDahale
fc08fa1c09
Sketcher: costraint creation mode uses toolbar icons
2017-02-24 15:20:26 +01:00
AjinkyaDahale
6be9a9bc53
Sketcher: Added option to turn constraint creation modes on/off
...
Can be found below geometry creation "continous mode" option
2017-02-24 15:20:26 +01:00
AjinkyaDahale
e757c57a30
Sketcher: External edges in constraint modes (Symmetry)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
31456a7e30
Sketcher: External edges in constraint modes (Angle)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
167b28d200
Sketcher: External edges in constraint modes (Equal)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
ff74ba32a8
Sketcher: External edges in constraint modes (radius)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
2ffd94df5f
Sketcher: External edges in constraint modes (tangent)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
daf5a1fdbf
Sketcher: External edges in constraint modes (perpendicular)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
29761fc90d
Sketcher: External edges in constraint modes (parallel)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
89664982fb
Sketcher: External edges in constraint modes (DistanceX/Y)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
c6fd807bd4
Sketcher: External edges in constraint modes (point on object)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
ab4a222dc6
Sketcher: External edges in constraint modes (distance)
2017-02-24 15:20:26 +01:00
AjinkyaDahale
39725ff777
[Sketcher] Moved angle to constraint creation mode
...
plus some cosmetic changes
2017-02-24 15:20:26 +01:00
Abdullah Tahiri
9e6beb1a01
Sketcher: Information layer scenography update on geometry change
2017-02-21 13:24:10 +01:00
AjinkyaDahale
cc46acf10e
[Sketcher] Moved radius to constraint mode framework
2017-02-10 17:32:18 +01:00
AjinkyaDahale
3d9b46d9f3
[Sketcher] corrected artifact introduced by faulty conflict resolution
2017-02-10 17:32:18 +01:00
AjinkyaDahale
3cf00a1314
[Sketcher] Moved distance to constraint mode
2017-02-10 17:32:18 +01:00
AjinkyaDahale
47624cf3e1
Moved vertical and horizontal distance to constraint creation mode
2017-02-10 17:32:18 +01:00
AjinkyaDahale
5ff6895080
Moved symmetric to general constrain creation mode framework
...
That makes all of the non-dimensioned constraints
2017-02-10 17:32:18 +01:00
AjinkyaDahale
45cb028f34
Moved equal to general constrain creation mode framework
2017-02-10 17:32:18 +01:00
AjinkyaDahale
adc13eda06
Move tangent to general constraint mode framework
2017-02-10 17:32:18 +01:00
AjinkyaDahale
df658ae889
Replace some of the allowedSelSequences with more general form
...
Greatly shortens the number of sequenses needed if you replace SelVertex
and SelRoot with SelVertexOrRoot and similar for the edges/axes.
For e.g. implemented sequences for perpendicular dropped from the older
25 to now 6.
2017-02-10 17:32:18 +01:00
wmayer
17a3d1e81f
fix warnings: -Wmaybe-uninitialized
2017-02-04 15:16:47 +01:00
wmayer
33e0bc3a46
fix various warnings
2017-02-02 20:42:56 +01:00
AjinkyaDahale
e8c822c93e
Changes based on wwmayer's comments
2017-01-31 17:07:45 +01:00
