- the current implementation only considers explicitly given binaries (with full path) and ignores the setting to check the environment paths
- also remove 2 trailing whitespaces
- for the first time ever you get now for every time step a result in FreeCAD
- this way also change output filename prefix to "FreeCAD" to avoid we depend on the default name Elmer gives and that was already changed in the past and to distinguish the *.vtu files from those created e.g. directly by ElmerGui
- also remove an unnecessary output to the case.sif file
- different time results were never output, only the final one
the reason is that the Output Intervals intervals property was missing
- a second reason was that the result scaling solver must be executed every time an output should be generated
- the BDF Order property is a transient-only property
- different time results were never output, only the final one
the reason is that the Output Intervals intervals property was missing
- a second reason was that the result scaling solver must be executed every time an output should be generated
- the BDF Order property is a transient-only property
- fix bug if no solver should be default
- only provide solvers that are available to be the default
- also add commit opened transactions
- also remove unused include and correct an include
- for the solvers the workflow should be that one can directly after adding a solver child to it via the toolbar
Therefore select the added solver object
See https://github.com/FreeCAD/FreeCAD/pull/8530#issuecomment-1474824366.
When there are already existing points and coincidence auto-constraints are
added in the process of making a B-spline (either by control points or
interpolation), unintended behaviour can happen.
Additionally, when creating B-spline by interpolation, if consecutive points are
coincident (or very close to each other), the OCCT algorithm fails. This is also
prevented in this commit.
This commit is part of a project funded by the Open Toolchain Foundation under
the title "Open Toolchain Foundation - Curve drawing tool in Sketcher
Workbench".
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
Commented out the periodic version for now since they don't work completely well.
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
[Sketcher] Add better icons for `CreateBSplineByInterpolation`
Courtesy @paddlestroke.
As a side-effect also prevents a segfault possible by providing just 3 points.
[Sketcher] Clarify that mults might not be followed
Some examples when this may be ignored include:
1. A number higher than 3 is given (because cubic B-splines are created)
2. If the knots just before and just after have multiplicities >=3, the piece
between these two is fully continuous, and this (middles) point will only be
constrained with point-on-object.
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
Some parts of `DrawSketchHandlerBSplineByInterpolation` were taken from
`DrawSketchHandlerBSpline` but not modified to reflect the differences.
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
Specifically, when drawing by interpolation, only cubic splines are currently
supported.
Some related "TODO" comments are also removed or modified.
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
Only creates 1-degree splines by describing knots.
This commit is part of a project funded by the Open Toolchain Foundation under the title "Open Toolchain Foundation - Curve drawing tool in Sketcher Workbench"
- for e.g. the solver objects it is important that the added equations are visible in the TreeView
- also improve activation of analyses for documents with multiple analyses: one activates one and can then subsequently add an object to it because the activation will also select
- this PR addresses a long-standing annoying issue: You are already in the FEM WB and load a file.
Then you cannot just start but first have to activate the Analysis. But one is in the FEM WB to work with analyses.
- for e.g. the Elmer equations it is important that one can add several equations subsequently and that the added equations are visible in the TreeView
