- Thread runout according to DIN 76-1
- Through all length updated to be calculated based on bounding box
- New properties: ModelThread, ThreadDepthType, ThreadDepth,
UseCustomThreadClearance, CustomThreadClearance
- Rename Old but unused parameters related to thread modeling.
- Functionality exposed in UI
The "angle" variable was not being initialized in any of the
constructors for the CutDimensionSet, and nothing was being initialized
by the default constructor. This commit adds angle as an optional final
argument to the parameterized constructors, defaulting to 0.0, and adds
default values to the default constructor using the first of each enum
and 0.0 for the angle. The default constructor is required elsewhere in
the code so cannot be trivially removed. Issue identified by Coverity.
also fix annoying variable naming - different variables representing different types should not have the same name
also update a comment according to depending PRs
This PR is based on PR #4344 and a spin-off of PR #4337. It fixes:
We have normed screw head cuts. These values can be overridden but we must store the info about the overriding. Why? - because when you have e.g. made a custom change to a normed countersink and then change to another countersink norm, you would either not get the values defined in the norm or you get these values but loose e.g. your depth settings
This PR is based on PR #4343 and a spin-off of PR #4337. It fixes:
- the bug that we did not use the normed clearance hole diameters for UTS holes
- missing recompute when changing existing hole from Metric to UTS type
This PR is the first in a series of probably 3 PRs to fix known hole dialog bugs.
This one fixes:
- the .ui file issues
- readonly status issues of some widgets/properties (e.g. when the hole is through all, disable drill point settings)
- the bug that updateHoleCutParams() overwrote the previously correctly determined hole diameter
- just a trifle: change a function name to fit into the naming scheme
as reported in https://tracker.freecadweb.org/view.php?id=3818
we treat the blind hole depth not according to the conventions. The size of the drill point due to the angle is normally not taken into account but FC does this in any case.
This PR adds therefore an option, that is by default off, to take the drill point size into account.
Without the option, (the new default) the depth is calculated according to the conventions.
The PR also removes unused widgets and restored the tab order in the .ui file. The thread parameters were never used. In case we made in future the decision to carve into holes real (modeled) threads, we need a special UI for that solution anyway so having the dead code in is not helpful at all.
These values are calculated exactly from (diameter-pitch), and are
included here only to silence warnings from some compilers about missing
initializers. These values are not (currently) used in the code, which
directly calculates the core hole as needed in this case.
- there is the ISO 273 describing clearance holes, so we need to take these values. Only if we have a size not defined in the norm, we calculate
- add the coarse (wide) type for clearance holes from ISO 273
- add all screw thread sizes defined in DIN 13/ISO 261
- rearrange thread dialog to make it more compact
- change name "fit" to "clearance" as discussed
- add tooltips to the dialog
- fix issue with TaperedAngle dialog field
- change a size name because the norms define "M1" not "M1.0"
- fix bug that custom angles were overwritten
- the norms only define screw heads, not the cut for them, so also a custom angle is possible to sink a metric screw
- use better step in UI since one changes the presets only in fractions of a millimeter (otherwise it would be a different hole size)
- handle case of no cut
- calculate change in diameter when adding depth to countersinks
- propose cut values also for UTS profiles
- the UTS defines coarse and fine while for ISO it is regular and fine, thus fix the name
- for the dialog: set minimum values to zero (angles etc. cannot be negative)
- add definitions for IS 2009, 7046 and 12474
- remove useless file for a ISO 14583 since there are no such screws on the market
- rename "coarse" to "regular" since this what it actually is according to the norms
- uniform the x1 threads (for x2.0 etc we use a trailing zero and for some we use x1, for some already x1.0, thus consistently use x1.0)
- add some ISO 10642 entries
- correct ISO 4762:
- correct some values
- the does does not define a size M27
- add the two missing sizes
- propose valid values for the cut depth and diameter when creating new holes
- add new definitions for metric fine
- some code simplification and comments
‣ Make countersink and counterbore on metric holes freely definable by user.
‣ Fixed the Naming of M1.6, M2, M2.5 and M3.5
‣ Added constructor for custom enums from Enums to PropertyEnumeration
‣ Put definitions of cut-types (counterbore/countersink) for
screwtypes into json-files for easy modification.
‣ Allow users to put its own definitions in json-files in
[UserDir]/Mod/PartDesign/Resources/Hole
‣ Contains several examples of cut-type definition json-files that are
propably not production-ready.
This uses a local copy of nlohmann::json¹ to read json-files.
__________
¹ This is a very nice,header-only C++ library under the MIT License
(https://github.com/nlohmann/json). I copied the single-file-version
and the forward-declaration-header into …/PartDesign/App/ so no new
dependencies arise.
fix a problem with counterbore and countersink in PartDesign Hole feature.
It was not possible to custom define counterbores or countersinks if a
metric thread hole was selected.
Handle the cut-types None, Counterbore and Countersink euqal
regardless of type of thread and let the user customize:
None: none
Counterbore: diameter and depth
Countersink: diameter and angle
- initialization: thread direction only sensible if there is a thread
- initialization: hole diameter can only be changed if there is no profile
- initialization: only enable allowed hole cut parameters
- also for the ISO profiles it is allowed to countersink/bore deeper/less deep
- UI file: add some tooltips (the other changes were done automatically by Qt's designer)
- initialization: if a threaded, the fit must not be enabled
- when changing the profile type setReadOnly for the fit and class according to if threaded or not
- when changing if threaded or not, setReadOnly accordingly for the fit and class
