Added buttons to port sketches to CCW-emulation Sketcher.
Bonus =) : Added constraint orientation lock/unlock buttons (affects
point-wise modes of tangent and perpendicular constraints so far)
Fixes a bug where an arc, ellipse, or arc-of-ellipse, being reversed in
XY plane, behaved badly in sketcher (see forum thread "Sketch: how to
handle reversed external arcs?"
http://forum.freecadweb.org/viewtopic.php?f=10&t=9130 ).
Also fixes a problem with rotated arcs (see forum thread "Rotating Arc
in Sketcher"
http://forum.freecadweb.org/viewtopic.php?f=22&t=9145#p74262 ).
This is done by adding an emulation flag to a few methods in
Part::GeomXXX, which makes the shape to pretend being non-reversed
(CCW). This causes endpoints of reversed arcs of circles lineked as
external geometry to swap, causing broken sketches sometimes.
Fix AngleViaPoint to support new derivative calculation technique.
OpticConstraints: Adding Snell's law. Fix AngleViaPoint to support new derivative calculation technique.
Snell's law constraint added to GCS, but not yet exposed and cannot be
tested.
Since the way CalculateNormal() returns derivatives had changed,
AngleViaPoint constraint needed modifications. Nothing serious.
OpticConstraints: SnellsLaw progress
Addable through python. Fix math. Some quick-and-dirty visual stuff to
get rid of hangs and to see the constraint in action.
OpticConstraints: SnellsLaw: flipping logic fix
OpticConstraints: SnellsLaw progress
Added toolbar button. Allowed editing a datum by doubleclick. New error
message approach during constraint creation.
OpticConstraints: SnellsLaw
OpticConstraints: SnellsLaw: list label improvement
OpticConstraints: SnellsLaw: fix after rebase
OpticConstraints: SnellsLaw: expose helper constraints
Snell's law internally is made of three constraints: point-on-object,
coincident and the Snell's sin/sin. They were all buried under one UI
constraint. Exposing them allows to construct reflection and
birefringence on the point (attempting to do so used to result in
redundant constraints and was often not functional at all).
This commit breaks compatibility with older files.
OpticConstraints: SnellsLaw: small refactor of math
Placing the duplicated code of error and gradient calculation into a
private method.
OpticConstraints: SnellsLaw: fix datum edit unit
OpticConstraints: SnellsLaw: fix datum edit bug
After previous fix, the dimensionless value was not accepted (the
constraint's value did not change, the changes were ignored).
AngleViaPoint: fixes in UI routines + new messages
Goofed undo message in tangency via point is fixed.
Forgotten updateActive, clearSelection have been added.
New more informative error messages for tangent constraint.
AngleViaPoint: using it instead of via line tangency
* replaced the helper construction line for ellipse-to-ellipse and
similar tangency with a point. Using tangent-via-point there
* deleted tangency via line for point-to-point on
(cherry picked from commit 9e3fa8c8de0f49c0ef3c978e015eb905358dbdd9)
AngleViaPoint: internal/external tangency locking
*Added automatic tangency type lockdown for all new constraints (only
for point-wise tangency).
Tangency type is stored in the constraint datum field, as an angle value
shifted by Pi/2 (to be able to treat 0.0 as undefined type).
Added ability to switch the tangency by setting datum value from python
(can be abused by passing arbitrary angle).
Further simplified the tangency related code in Sketch.cpp.
AngleViaPoint: added license to Geo.cpp
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: renames in Constraints.cpp/.h
Changed some names to increase self-explanatoryness:
bool "remapped" renamed to "pvecChangedFlag"
"ReconstructEverything()" renamed to "ReconstructGeomPointers()"
AngleViaPoint: using for endpoint perpendicularity
+ direction lockdown, just as with tangency.
+ quite a lot of old code is gone because of that
AngleViaPoint: perp-ty UI routine made similar to tangent
(Git has made a very messy diff.)
The changes are:
* Perpendicularity-via-point (3-element selection) support added.
* Endpoint-to-curve and endpoint-to-endpoint supports all shape
combinations.
* a bit of code cleanup and clarifications.
AngleViaPoint: placement of perpendicular icon in 3d view
AngleViaPoint: fix: allow setDatum of perpendicular constraint
AngleViaPoint: fix: centers of ellipses are not endpoints
isSimpleVertex used to return false for centers of ellipses and arcs of
ellipses, which made them being accepted for point-to-point tangency.
Should be fixed forever, mo more changes are expected to be necessary
for new types of geometry.
AngleViaPoint: precalc with OCC (work in progress)
Work in progress (not yet working).
Using OCC's tangent to replace implementation of
SketchObject::calculateAngleViaPoint.
AngleViaPoint: fix math: normal now points inwards, where it was intended initially and goofed up.
AngleViaPoint: adding comments to the code
AngleViaPoint: using GeomCurve::closestParameterToBasicCurve for angle precalculation
AngleViaPoint: Py method: changeConstraintsLocking
changeConstraintsLocking(True) - locks/re-locks all lockable
tangency/perpendicularity constraints of the sketch (applicable to
existing sketches).
changeConstraintsLocking(False) - removes locking information from
lockable constraints
AngleViaPoint: final SketchObject::calculateAngleViaPoint
Now, finally, using OCC functionality (thanks Abdullah!), without
composing temporary Sketch object.
Solver iteration limit independent of system size (reduces hangs when
solver fails to converge).
Repaint() instead of update() to force render for every movePoint.
Sketcher: New Constraint AngleViaPoint
* Adding generic CalculateNormal() method
* Reconfiguration of GCS geometry classes: adding a base class "Curve",
that has a pure virtual function CalculateNormal().
* Initial inplementation of the new function.
* adding Vector2D class (I wanted to reuse the existing, but got wierd
compile errors, so implemented a new one... TODO.)
* Adding redirection support into GCS shapes. Adding a Copy method to
GCS::Curve.
* Automatic point-on-object
* Angle precalculation: when AngleViaPoint is added, angle is properly calculated based on
existing geometry.
* Added tangency-via-point using one.
* Implemented placement of tangency-via-point icon in 3d view. Also
affected is the placement of point-on-object icon (since it is very
similar code, it is now shared with tangency-via-point)
* Placement and moving of angle datum
Functions: calculateAngleViaPoint, isPointOnCurve,
calculateConstraintError exposed to python
* Endpoint tangency: All endpoint-to-endpoint and endpoint-to-curve tangency now works
through AngleViaPoint constraint and obsolete code clean up (most procedures
addConstraintTangentXXX2YYY)
- ArcOfEllipse enhancement: Tangency ArcOfEllipse to ArcOfEllipse or ArcOfCircle by selecting end/starting points...
- Minor bug corrections (Thanks DeepSOIC)
- ExposeInternalGeometry python command
- DeleteUnusedInternalGeometry python command
- On deletion of an Ellipse/ArcOfEllipse all further unconstrained internal geometry is also deleted.
- This cleans up the code by eliminating code repetition in the creation methods.
- Major bug fix for autoconstraints for ellipse and arc of ellipse creation (for both creation methods)
- Major bug fix Start and Endpoint constraints of an arc of ellipse where not taking into account that Sketcher arcs are always CCW, so they have to be exchanged if we convert a CW arc into a CCW arc.
Sketcher: General bug fix: Tangency wrongly suggested
What?
=====
- On creation of a shape autoconstraints are suggested.
- Tangent autoconstraint was suggested even with lines perpendicular to the tangency direction
Reproduce
=========
- Make a circle on the origin and move the mouse along the X axis, it will suggest a tangency that is impossible
- Click on the axis and no circle will be created
Solution
========
- The SeekConstraint now can use the parameter dir to give a direction that is substantially perpendicular to the expected tangency, so that
if an object having a direction (a line) is hit, a tangency will not be suggested if within around 6 degrees of being parallel.
- Additionally, if such a line is an X,Y axis of the sketch, tangency will only be suggested if the direction is within 6 degrees of being perpendicular (i.e. it is almost tangent already while sketching).
- This difference is due to the fact that an X or Y axis can not "move" to meet the object under creation, whereas a line can.
I. Fix minor bug where wrong b was used to create ellipse internal geometry.
Tweak the internal geometry code a bit and reformat it so it isn't so wide.
Also begin debugging constraint conflicts on small circular ellipses.
There seem to be two issues currently in major/minor internal geometry lines:
1) Sometimes minorLength > majorLength due to round-tripping doubles, and
2) Constraint conflicts when majorLength > minorLength by an epsilon on the order of 1e-6
(cherry picked from commit 5c3e20af1a95c860112289dcdda54ea99778bc3a)
II. When testing for a valid ellipse, also ensure that the mangled major axis length > the mangled axis length.
This additional condition ensures that major and minor axis constraints don't conflict in the case of small
(nearly) circular ellipses.
The is still a potential bug in the solver when the major length is just slightly larger than the minor, but this fix
makes it nigh impossible to reproduce.
(cherry picked from commit 7e274bc32d9aa1a12ab52bfa33ed80353540b062)
III. Code clean up
Remove redundant 3d vectors.
(cherry picked from commit c656d5165c8bae8f101a2b46af6b12348d06cefe)
--Center, major radius, minor radius
--Periapsis, apoapsis, minor radius
Artist: We need an icon for periapsis, apoapsis, minor radius method.
(cherry picked from commit f0a4339621b0bf901754af14c3cd36c95ca55966)
Elements that have internal geometry are created with the internal geometry on creation.
It has been under discussion for a long time. Ulrich was in favour (asked for it several times).
DeepSOIC implemented the focus because he hated the poor dragging of the ellipse when empty.
- Visual representation of equality constraint: Separate circle and arcofcircle implementation from ellipse and arcofellipse implementation
- Fix for Alignment constraint: Now it allows to assign a second element, one by one
- Box selection for ArcOfEllipses
Fixes the bug that vertex far away got selected due to lack of sync between the selection and draw loops.
- Minor changes to alignment constraint selection to avoid to create objects just for simple calculations
- Equality constraint of Ellipse, ArcOfEllipse and combinations of those elements
- Bugfix for internalalignment creation of major and minor of ellipse and extension to arcofellipse
- Trim support for ellipses
- Solver threshold for rank calculation set at 1e-13.
- Trim support for arc of ellipse
- Ellipses and ArcOfEllipses as external geometry
- Validate Sketch now supports arcs of ellipse
- Tangents of Ellipse or ArcOfEllipse to any of ArcOfcircle, circle and Ellipse (using construction elements)
- Perpendicularity constraint
- Bug fix: Show/hide internal geometry not working for external geometry
- Visualization of Internal alignment constraints when selecting in the constraint widget
- Equality for ellipses and arc of ellipses
- Fix of internal geometry creation
- Fix swapped negative and positive ends of major radius line on creation
- Removing the fudge factor (no longer needed)
- Fix to restore internal alignment - autodecide on constraint creation which point of the line is closer to the position
- Change mode so that focus1 is not a point, but two doubles so that visual model and solver model match in number of points.
- Solver fix to deal with reduced constraint partials accuracy (threshold for matrix rank calculation tweak)
- Changes suggested by logari81
- Ellipse introduction button via (center,majaxis extreme, a point in edge), ellipse is always CCW so that Z axis goes in the positive direction of the sketch
- Backwards compatibility with files of previous versions of ellipse not defining a phi angle
- Art by Jim (all the icons you see and the XPMs shown on creation of an ellipse)
- Element Widget support for ellipses
- Box selection for ellipses
- Point on Ellipse constraint based on the gardener's method based on Ulrich's function proposal (radcan simplified, i.e. with simplify_radical sage function)
- Tangent: Ellipse to Line based on DeepSOIC's geometric formulation (radcan simplified)
Sketcher New Feature: Internal Alignment Constraint
- The element to which internal alignment is applied has to be selected last.
- All other elements are added in the order of priority, taking into account existing elements
- Art by Jim (beautiful icons).
Sketcher New Feature: Tool to show/hide/restore the internal geometry of an element
- New functionality for show/hide internal geometry:
toggles between hiding all unused internal geometry elements and showing all internal geometry.
The restore function is implicit to the showing all internal geometry
Sketcher New Feature: Arc of Ellipse support
- Part::Geometry + Python implementation
- ArcOfEllipse creation method
- Art by Jim (all the icons you see and the XPMs shown on creation of arc of ellipse elements)
- Sketcher Element widget for ArcOfEllipse.
Bug fix: Select elements associated to constraints works now for foci internal alignment constraints
