App::Property <empty> <비어 있음> Angle 각 Axis 축 Position 위치 Enum 열거형(Enum) Base 기본 CmdTestConsoleOutput Test Console Output Test Console Output Run test cases to verify console messages 시험삼아 콘솔 메시지를 확인해보기 위해 테스용 샘플을 실행 해 보세요 Command Edit 편집 Import 가져오기 Delete 삭제 Paste expressions 표현식 붙여넣기 Make link group 링크 그룹 만들기 Make link 링크 만들기 Make sub-link 서브 링크 만들기 Import links 링크 가져오기 Import all links 모든 링크 가져오기 Insert text document 텍스트 문서 삽입 Add a part 부품 추가하기 Add a group 그룹 추가하기 Add a variable set 변수 집합 추가 Align 정렬 Placement 위치 설정 Transform 변환하기 Toggle array elements 배열 요소 전환하기 Edit image 화상 편집 Set Random Color Set Random Color Toggle freeze Toggle freeze Skip recomputes 재계산 건너뛰기 Toggle Visibility Toggle Visibility Toggle Transparency Toggle Transparency Toggle Selectability Toggle Selectability CommandGroup File 파일 Edit 편집 Help 도움말 Link 연결 Tools 도구 View 보기 Window 작업창 Standard 표준 Macros 매크로 Macro 매크로 Structure 구조 Standard-Test 표준 테스트 Standard-View 표준 보기 Tree View Tree View Measure 측정하기 DlgCustomizeSpNavSettings Spaceball Motion SpaceNavigator 동작 Flip Y/Z Y / Z 반전 Global sensitivity Global sensitivity Dominant mode Dominant mode Enable translations Enable translations Enable rotations Enable rotations Calibrate 조정 Default 기본값 Enable 활성화 Reverse 반대로 DlgExpressionInput Expression Editor Expression Editor Store in VarSet... Store in VarSet... Error 오류 Variable Set Variable Set Name 이름 Group 그룹 Result 결과 DownloadItem Ico Ico Filename 파일이름 EditMode &Default &Default The object will be edited using the mode defined internally to be the most appropriate for the object type 대상체 유형에 가장 적합하도록 내부적으로 정의된 모드를 사용하여 객체를 편집합니다 Trans&form Trans&form Cu&tting Cu&tting &Color 색상(&C) The object will have the color of its individual faces editable with the Appearance per Face command The object will have the color of its individual faces editable with the Appearance per Face command The object will have its placement editable with the Std TransformManip command 대상물이 변위 명령을 입력할 수 있는 상태로 될 것 입니다 This edit mode is implemented as available but currently does not seem to be used by any object 현 편집 모드는 사용할 수 있는 기능이고, 현재 사용중인 대상물이 없는 것으로 보입니다 ExpressionLabel Enter expression… (=) Enter expression… (=) Expression: 표현식: Gui::ActionSelector Available: 사용가능 Selected: 선택: Add 추가하기 Remove 제거 Move up 위로 이동 Move down 아래로 이동 Gui::AlignmentView Movable object 이동 가능한 대상체 Fixed object 고정된 대상체 Gui::Assistant %1 Help %1 도움말 %1 help files not found (%2). You might need to install the %1 documentation package. %1 도움말 파일을 찾을 수 없습니다 (%2). %1 문서 패키지를 설치 해야 합니다. Unable to launch Qt Assistant (%1) Qt 도우미 (%1) 를 시작할 수 없습니다 Gui::BlenderNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press Shift and middle mouse button Press Shift and middle mouse button Press middle mouse button 가운데 마우스 버튼 누르기 Scroll mouse wheel Scroll mouse wheel Gui::CADNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press middle mouse button 가운데 마우스 버튼 누르기 Press middle+left or middle+right mouse button Press middle+left or middle+right mouse button Scroll mouse wheel or keep middle button depressed while doing a left or right click and move the mouse up or down Scroll mouse wheel or keep middle button depressed while doing a left or right click and move the mouse up or down Gui::ContainerDialog &OK 확인(&O) &Cancel 취소하기(&C) Gui::DAG::Model Rename 이름 바꾸기 Renames the object 대상체 이름 바꾸기 Finish Editing Finish Editing Finishes editing the object 대상체 편집 끝내기 Gui::Dialog::AboutApplication About 정보 Version 버전 Revision number 수정 번호 Release date 배포일 Operating system 운영 체제 Architecture Architecture Copy to Clipboard Copy to Clipboard License 면허 OK 확인 Gui::Dialog::AboutDialog Credits 제작진 Credits Header for the Credits tab of the About screen Header for the Credits tab of the About screen 제작진 FreeCAD would not be possible without the contributions of: FreeCAD would not be possible without the contributions of: Individuals Header for the list of individual people in the Credits list. 개인 Organizations Header for the list of companies/organizations in the Credits list. 단체 License 면허 Libraries 라이브러리 Collection 컬렉션 Privacy Policy 개인정보 정책 Copied! 복사됨! Gui::Dialog::ApplicationCache Cache Directory Cache Directory The cache directory %1 exceeds the size of %2. %1 캐시 디렉터리가 %2의 크기를 초과합니다. Clear it now? Clear it now? Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! Warning: Make sure that this is the only running %1 instance and that no documents are opened as this may result into data loss! Gui::Dialog::ButtonModel Button %1 버튼 %1 Out of range Out of range Gui::Dialog::CameraDialog Camera Settings Camera Settings Orientation 방향 Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 Current View Current View Gui::Dialog::Clipping Clipping 클리핑 Clipping X 클리핑 X Offset 편차 Flip 뒤집기 Clipping Y 클리핑 Y Clipping Z 클리핑 Z Custom Clipping Direction Custom Clipping Direction View 보기 Adjust to view direction 방향 보기를 조정합니다 Direction 방향 Gui::Dialog::CommandModel Commands 명령 Gui::Dialog::DemoMode View Turntable 턴테이블 보기 Angle 각 Speed 속도 Minimum 최소 Maximum 최대 Fullscreen 전체 화면 Enable timer 타이머 기능 설정 s s Play 플레이 Close 닫기 Stop 중지 Gui::Dialog::DlgActivateWindow Choose Window 창 선택 &Activate 활성화하기(&A) Gui::Dialog::DlgActivateWindowImp Windows 창 Gui::Dialog::DlgAddProperty Add Property Add Property Type 유형 Value 값 Tooltip 툴팁 Group 그룹 Name 이름 Add 추가하기 Invalid group name Invalid group name Invalid type name Invalid type name Invalid property name '%1' Invalid property name '%1' Property '%1' already exists Property '%1' already exists '%1' is a constant '%1' is a constant '%1' is a unit '%1' is a unit Gui::Dialog::DlgAuthorization Authorization 인증 Site Site Username 사용자 이름 Password 암호 %1 at %2 %2에 %1 Gui::Dialog::DlgCheckableMessageBox Dialog 다이얼로그 TextLabel 텍스트 라벨 CheckBox 확인란 Gui::Dialog::DlgChooseIcon Choose Icon 아이콘 선택 Icon Folders Icon Folders Gui::Dialog::DlgCreateNewPreferencePack Create New Preference Pack 새 환경설정 팩 만들기 Name 이름 Browse 탐색 Property group templates 속성 그룹 템플릿 Gui::Dialog::DlgCreateNewPreferencePackImp Export configuration Export configuration Pack already exists 팩이 이미 존재합니다 A preference pack with that name already exists. Overwrite it? A preference pack with that name already exists. Overwrite it? Gui::Dialog::DlgCustomActions Macros 매크로 Setup Custom Macros 사용자 정의 매크로 설정 Macro 매크로 Menu text Menu text Tooltip 툴팁 Status text Status text What's this What's this Accelerator Accelerator Pixmap Pixmap Choose Icon 아이콘 선택 Add 추가하기 Remove 제거 Replace 바꾸기 Gui::Dialog::DlgCustomActionsImp Icons 아이콘 Macros 매크로 Macro not found 매크로를 찾을 수 없습니다. Could not find macro file '%1' Could not find macro file '%1' Empty macro 빈 매크로 Specify the macro first Specify the macro first Empty text 빈 텍스트 Specify the menu text first Specify the menu text first No item selected 선택 항목 없음 Select a macro item first Select a macro item first Gui::Dialog::DlgCustomCommands Gui::Dialog::DlgCustomKeyboard Keyboard 키보드 To change a current shortcut enter the new shortcut in the field below and press 'Assign'. 현재 단축키를 변경하려면 아래 필드에 새 단축키를 입력하고 'Assign'을 누릅니다. Time in milliseconds to wait for the next keystroke of the current key sequence. For example, pressing 'F' twice in less than the time delay setting here will be treated as shortcut key sequence 'F, F'. Time in milliseconds to wait for the next keystroke of the current key sequence. For example, pressing 'F' twice in less than the time delay setting here will be treated as shortcut key sequence 'F, F'. This list shows commands having the same shortcut in the priority from high to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. 이 목록에는 높은 우선 순위에서 낮은 우선 순위로 동일한 바로 가기를 가진 명령이 표시됩니다. 동일한 바로 가기를 가진 두 개 이상의 명령이 동시에 활성화된 경우. 우선 순위가 가장 높은 항목이 작동됩니다. &Category &Category Current shortcut Current shortcut &New shortcut &New shortcut Multi-key sequence delay Multi-key sequence delay Shortcut priority list Shortcut priority list &Assign 할당하기(&A) Alt+A Alt+A Clear 지우기 &Reset 재설정(&R) Alt+R Alt+R Re&set All 모두 재설정(&s) Alt+S Alt+S Up 위 Down 아래 Gui::Dialog::DlgCustomKeyboardImp Type to search… Type to search… Icon 아이콘 Command 명령 Shortcut 단축키 Default 기본값 Name 이름 Title 제목 All 전체 Gui::Dialog::DlgCustomToolbars Toolbars 도구 모음 Category 카테고리 Move Right Move Right Moves the selected item one level down.This will also change the level of the parent item. Moves the selected item one level down.This will also change the level of the parent item. Move Left Move Left Moves the selected item one level up.This will also change the level of the parent item. Moves the selected item one level up.This will also change the level of the parent item. Move Up Move Up Moves the selected item up.The item will be moved within the hierarchy level. Moves the selected item up.The item will be moved within the hierarchy level. Move Down Move Down Moves the selected item down.The item will be moved within the hierarchy level. Moves the selected item down.The item will be moved within the hierarchy level. New 새로 만들기 Rename 이름 바꾸기 Delete 삭제 <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;">Note: The changes become active the next time you load the appropriate workbench</body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;">노트: 다음 번에 적절한 워크벤치를 로드할 때 변경사항이 활성화됩니다.</body></html> Global 전역 Command 명령 <Separator> <구분자> %1 module not loaded %1 모듈을 불려오지 못했습니다. New toolbar 새 도구 모음 Toolbar name: 도구 모음 이름: Duplicated name 복제된 이름 The toolbar name '%1' is already used 도구 모음의 이름 '% 1'은 이미 사용되고 있습니다. Rename toolbar 도구 모음 이름 바꾸기 Gui::Dialog::DlgCustomizeImp Customize 사용자 정의하기 &Help 도움말(&H) &Close 닫기(&C) Gui::Dialog::DlgCustomizeSpNavSettings Spaceball Motion SpaceNavigator 동작 No Spaceball present No Spaceball present Gui::Dialog::DlgCustomizeSpaceball Spaceball Buttons Spaceball 버튼 No Spaceball present No Spaceball present Buttons 버튼 Reset 재설정 Print Reference 참조 인쇄하기 Gui::Dialog::DlgDisplayProperties Gui::Dialog::DlgEditorSettings Gui::Dialog::DlgInputDialog Input 입력 Gui::Dialog::DlgInspector Scene Inspector 장면 검사기 Gui::Dialog::DlgMacroExecute Case-insensitive search for filenames, regular expressions supported Case-insensitive search for filenames, regular expressions supported Execute Macro Execute Macro Macro Name Macro Name Find file Find file Find in files Find in files User macros 사용자 매크로 System macros 시스템 매크로 Execute 실행 Close 닫기 Create 만들기 Delete 삭제 Edit 편집 Rename 이름 바꾸기 Duplicate 복제하기 Launches a guide on how to set up a macro in a custom global toolbar Launches a guide on how to set up a macro in a custom global toolbar Opens the Addon Manager to download macros created by the community Opens the Addon Manager to download macros created by the community User Macros Location User Macros Location Opens the macros folder in the system file manager Opens the macros folder in the system file manager Open Folder Open Folder Toolbar 도구 모음 Filter by file content, case-insensitive. Regular expressions are supported. Filter by file content, case-insensitive. Regular expressions are supported. Download 다운로드 Gui::Dialog::DlgMacroExecuteImp Macros 매크로 Macro file 매크로 파일 Existing file 존재하는 파일 '%1'. This file already exists. '%1 '입니다. 파일이 이미 존재함. Cannot create file 파일을 만들 수 없습니다. Creation of file '%1' failed. 파일 '%1'을 생성하지 못했습니다. Delete macro 매크로 삭제 Do not show again 다시 표시 안함 Guided Walkthrough 가이드된 워크스루 This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. Note: your changes will be applied when you next switch workbenches 이것은 사용자 지정 전역 도구 모음에서 이 매크로를 설정하는 방법을 안내합니다. 지침은 대화상자 내에서 빨간색 텍스트로 표시됩니다. 참고: 다음에 워크벤치를 전환할 때 변경사항이 적용됩니다. Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close 워크스루 지침: 누락된 필드를 채우고(옵션) 추가를 클릭한 다음 닫기를 클릭합니다 Walkthrough instructions: Select macro from list, then click right arrow button (->), then Close. Walkthrough instructions: Select macro from list, then click right arrow button (->), then Close. Walkthrough instructions: Click New, select macro, then right arrow (->) button, then Close. Walkthrough instructions: Click New, select macro, then right arrow (->) button, then Close. Renaming Macro File 매크로 파일 이름 바꾸기 Read-Only Read-Only Enter a file name: Enter a file name: Delete the macro '%1'? Delete the macro '%1'? Walkthrough, Dialog 1 of 2 Walkthrough, Dialog 1 of 2 Walkthrough, Dialog 1 of 1 Walkthrough, Dialog 1 of 1 Walkthrough, Dialog 2 of 2 Walkthrough, Dialog 2 of 2 Enter new name Enter new name '%1' already exists. '%1' 이미 존재합니다. Rename Failed 이름 바꾸기 실패함 Failed to rename to '%1'. Perhaps a file permission error? '%1'(으)로 이름을 바꾸지 못했습니다. 어쩌면 파일권한 오류일까요? Duplicate Macro 매크로 복제하기 Duplicate Failed 복제 실패함 Failed to duplicate to '%1'. Perhaps a file permission error? '%1'(으)로 복제하지 못했습니다. 어쩌면 파일권한 오류일까요? Gui::Dialog::DlgMacroRecord Record Macro Record Macro Macro Name Macro Name Macro Path Macro Path Choose Folder Choose Folder Record 기록 Stop 중지 Close 닫기 Gui::Dialog::DlgMacroRecordImp Macro recorder 매크로 기록 Specify a place to save first. Specify a place to save first. The macro directory does not exist. Choose another one. The macro directory does not exist. Choose another one. The macro '%1' already exists. Overwrite it? The macro '%1' already exists. Overwrite it? You have no write permission for the directory. Choose another one. You have no write permission for the directory. Choose another one. Existing macro 존재하는 매크로 Choose macro directory 매크로 디렉터리 선택 Gui::Dialog::DlgMaterialProperties Material 재료 % % Reset 재설정 Material Properties Material Properties Diffuse color Diffuse color Shininess 광택 Ambient color Ambient color Specular color Specular color Default 기본값 Emissive color Emissive color Transparency 투명도 Gui::Dialog::DlgOnlineHelp Online Help Online Help Help Viewer Help Viewer Location of start page 시작 페이지 위치 Gui::Dialog::DlgOnlineHelpImp HTML files HTML 파일 Access denied 액세스할 수 없습니다. Access denied to '%1' Specify another directory. Access denied to '%1' Specify another directory. Gui::Dialog::DlgParameter Parameter Editor 파라미터 에디터 Sorted 정렬됨 Search 검색하기 Enter a group name to search Enter a group name to search Find 찾기 Save 저장 Search group Search group Alt+C Alt+C &Close 닫기(&C) Gui::Dialog::DlgParameterFind Find 찾기 Find What Find What Look At Look At Groups 묶음 Names 이름 Values 값 Match exact string Match exact string Find Next 다음 찾기 Not found 찾을 수 없음 Cannot find the text: %1 Cannot find the text: %1 Gui::Dialog::DlgParameterImp Group 그룹 Name 이름 Type 유형 Value 보기 System parameter 시스템 파라미터 User parameter 사용자 파라미터 Search group Search group Invalid input 잘못 된 입력 Invalid key name '%1' 잘못된 키 이름 '%1' Gui::Dialog::DlgPreferencePackManagement Manage Preference Packs 환경설정 팩 관리하기 Open Addon Manager Open Addon Manager Gui::Dialog::DlgPreferencePackManagementImp User-Saved Preference Packs 사용자가 저장한 환경설정 팩 Built-In Preference Packs 내장 환경설정 팩 Toggle visibility of built-in preference pack '%1' 내장 환경설정 팩 '%1'의 가시성 전환하기 Deletes the user-saved preference pack '%1' Deletes the user-saved preference pack '%1' Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) Toggles the visibility of the addon preference pack '%1' (use the Addon Manager to remove permanently) Delete the preference pack named '%1'? This cannot be undone. Delete the preference pack named '%1'? This cannot be undone. Delete saved preference pack? 저장된 환경설정 팩을 삭제하시겠습니까? Gui::Dialog::DlgPreferences Preferences 환경설정 Reset 재설정 Header 헤더 Search preferences... Search preferences... Gui::Dialog::DlgPreferencesImp Reset Page '%1' Reset Page '%1' Resets the user settings for the page '%1' Resets the user settings for the page '%1' Reset Group '%1' Reset Group '%1' Reset All Reset All Clear User Settings Clear User Settings Clear all your user settings? Clear all your user settings? All settings will be cleared. All settings will be cleared. Restart Required Restart Required Restart FreeCAD for changes to take effect. Restart FreeCAD for changes to take effect. Restart Now Restart Now Restart Later Restart Later Resets the user settings for the group '%1' Resets the user settings for the group '%1' Resets the user settings entirely Resets the user settings entirely Wrong parameter 잘못 된 파라미터 Gui::Dialog::DlgProjectInformation Document Information Document Information Information 정보 &Name &Name Path 경로 UUID UUID Program version Program version Unit system Unit system Created &by Created &by Creation &date Creation &date &Last modified by &Last modified by Last &modification date Last &modification date Com&pany Com&pany License information License information Open in Browser Open in Browser &Comment &Comment Unit system for this file 이 파일의 단위계 License URL 면허 URL Gui::Dialog::DlgProjectUtility Document Utility Document Utility Extract Document Extract Document Source 출처 Destination 대상 Extract 추출 Create Document Create Document Load document file after creation Load document file after creation Create 만들기 Project file 프로젝트 파일 Empty source 빈 소스 No source is defined. 소스 없음이 정의되었습니다. Empty destination 빈 대상 No destination is defined. 대상 없음이 정의되었습니다. Failed to extract document Failed to extract document Failed to create document Failed to create document Gui::Dialog::DlgPropertyLink Link 연결 Filter by type 유형별로 필터링 Synchronizes the 3D view selection with the full object hierarchy Synchronizes the 3D view selection with the full object hierarchy Sync sub-object selection 하위-대상체 선택항목 동기화하기 Search 검색하기 A search pattern to filter the results above 위의 결과를 필터링하기 위한 검색 패턴 Reset 재설정 Clear 지우기 Gui::Dialog::DlgReportView Gui::Dialog::DlgRevertToBackupConfig Revert to Backup Config 백업 구성으로 되돌리기 WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. WARNING: this process will undo any preference changes made since the specified date, and will also reset your recent files and Macros to their state on that date. Available backup files Available backup files Gui::Dialog::DlgRevertToBackupConfigImp No selection in dialog, cannot load backup file 대화상자에 선택 항목이 없습니다. 백업 파일을 불러올 수 없습니다 Gui::Dialog::DlgRunExternal Running External Program Running External Program TextLabel 텍스트 라벨 Advanced >> 고급 > > Accept Changes Accept Changes Discard Changes 변경 내용 취소 Abort Program Abort Program Help 도움말 Select a file 파일 선택하기 Gui::Dialog::DlgSettings3DView 3D View 3D 보기 General 일반 Main coordinate system will always be shown in lower right corner within opened files 기본 좌표계는 열린 파일 내에서 항상 오른쪽 하단에 표시됩니다 Show coordinate system in the corner 구석에 좌표계를 표시 Axis letter and FPS counter color Axis letter and FPS counter color X-axis color X-축 색상 Y-axis color Y-축 색상 Z-axis color Z-축 색상 Axis cross will be shown by default at file opening or creation 파일을 열거나 생성할 때 기본적으로 축 교차가 표시됩니다 Show axis cross by default 기본값으로 축 교차 표시하기 Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files 마지막 작업에 필요한 시간과 결과 프레임 속도는 열린 파일의 왼쪽 하단 구석에 표시됩니다 Show counter of frames per second 초당 프레임 카운터를 표시 Rendering 렌더링 Use software OpenGL 소프트웨어 OpenGL 사용하기 Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO 사용(버텍스 버퍼 객체) Render cache 캐시 렌더링하기 Auto 자동 Distributed 분산됨 Centralized 집중됨 None 없음 Line smoothing Line smoothing MSAA 2x MSAA 2 x MSAA 4x MSAA 4 x MSAA 6x MSAA 6x MSAA 8x MSAA 8 x Render types of transparent objects 투명한 대상체의 렌더링 유형 One pass 하나의 패스 Backface pass 배면 패스 Size of vertices in the Sketcher, TechDraw and other workbenches 스케치, 기술문서 및 다른 작업대에서 꼭지점의 크기 Eye to eye distance for stereo modes 입체 모드에 적용된 눈과 눈 사이의 거리 Relative size Relative size Size of main coordinate system representation in the corner in % of height/width of the viewport Size of main coordinate system representation in the corner in % of height/width of the viewport Letter color Letter color This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by the GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support. If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by the GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support. Method of multisample anti-aliasing Method of multisample anti-aliasing Marker size 표식 크기 Anti-aliasing 앤티얼라이징 Transparent objects 투명한 대상체 'Render caching' is another way to say 'Rendering acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. 2) 'Distributed', manually turn on cache for all view provider root node. 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. 'Render caching' is another way to say 'Rendering acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. 2) 'Distributed', manually turn on cache for all view provider root node. 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. 입체 투영에 사용되는 눈과 눈의 거리입니다. 지정된 값은 현재 화면표시된 3D 객체의 경계 상자 크기에 곱할 인수입니다. Datum size Datum size Size of core datum objects Size of core datum objects % % Camera Type Camera Type Objects will be in orthographic projection Objects will be in orthographic projection Objects will appear in a perspective projection 객체가 투시도면에 나타납니다. Perspective renderin&g 투시 렌더링(&G) Or&thographic rendering 직교 렌더링(&T) Gui::Dialog::DlgSettings3DViewImp 5px 5px 7px 7px 9px 9px 11px 11px 13px 13px 15px 15px 20px 20px 25px 25px 30px 30px Anti-aliasing 앤티얼라이징 Open a new viewer or restart %1 to apply anti-aliasing changes. 새 뷰어를 열거나 %1을(를) 다시 시작하여 앤티에일리어싱 변경 내용을 적용합니다. Gui::Dialog::DlgSettingsCacheDirectory Cache 캐시 Browse cache directory Browse cache directory Cache Directory Cache Directory Location (read-only) Location (read-only) Check periodically at program start Check periodically at program start Always 항상 Daily 매일 Weekly 매주 Monthly 매월 Yearly 매년 Never 안 함 Cache size limit Cache size limit Check Now Check Now Notify the user if the cache size exceeds the specified limit 캐시 크기가 지정된 제한을 초과하는 경우 사용자에게 알립니다 Unknown 알 수 없음 Current cache size: %1 현재 캐시 크기: %1 Gui::Dialog::DlgSettingsColorGradient Color Gradient Settings Color Gradient Settings Color Model Color Model &Gradient &Gradient Red-yellow-green-cyan-blue Red-yellow-green-cyan-blue Blue-cyan-green-yellow-red Blue-cyan-green-yellow-red White-black White-black Black-white Black-white Style 스타일 Color gradient is used with its full color range 색상 그레이디언트는 전체 색상 범위와 함께 사용됩니다 &Flow 플로우(&F) Alt+F Alt+F Color gradient starts from the zero value 색상 그레이디언트는 0 값에서 시작합니다 &Zero 영점 맞추기(&Z) Alt+Z Alt+Z Visibility 표시 여부 Data outside the specified min-max range will be displayed in gray 지정된 최소-최대 범위를 벗어난 데이터는 회색으로 화면표시됩니다 Out g&rayed 회색으로 표시됨(&R) Alt+R Alt+R Data outside the specified min-max range will be displayed with transparency 지정된 최소-최대 범위를 벗어난 데이터는 투명하게 화면표시됩니다 Out &transparent 투명한 외관(&T) Alt+I Alt+I Parameter Range Parameter Range Ma&ximum Ma&ximum &Labels &Labels Mi&nimum Mi&nimum &Decimals &Decimals Number of labels besides the color bar 색상 표시줄 이외의 레이블 수 Number of decimals for labels besides the color bar 색상 표시줄 이외의 레이블에 대한 소수점 자릿수 Gui::Dialog::DlgSettingsColorGradientImp Wrong parameter 잘못 된 파라미터 The maximum value must be higher than the minimum value. 최대값은 최소값보다 커야 합니다. Gui::Dialog::DlgSettingsDocument Document 문서 General 일반 The application will create a new document when started 응용 프로그램이 시작될 때 새 문서를 만듭니다. Create new document at start up 시작 시 새 문서 만들기 Document save compression level (0 = none, 9 = highest, 7 = default) Document save compression level (0 = none, 9 = highest, 7 = default) Compression level for FCStd files FCStd 파일의 압축 수준 All changes in documents are stored so that they can be undone/redone 문서의 모든 변경사항은 실행 취소/재실행할 수 있도록 저장됩니다 Allow aborting recomputation 재계산 중단 허용하기 Storage 저장장치 Saving transactions (Auto-save) 트랜잭션 저장 (자동 저장) Discard saved transaction after saving document 문서 저장 후 저장된 트랜잭션 버리기 Run AutoRecovery at startup 시작 시 자동 복구 실행 How often a recovery file is written 얼마나 자주 복구 파일이 저장되는가 A thumbnail will be stored when document is saved 문서 저장 시 마중그림이 저장됩니다 Size 크기 How many backup files will be kept when saving document 문서를 저장할 때 보관할 백업 파일 수 Show format documentation Show format documentation Using undo/redo in documents Using undo/redo in documents Maximum undo/redo steps Maximum undo/redo steps How many undo/redo steps should be recorded How many undo/redo steps should be recorded Allow user aborting document recomputation by pressing Esc. This feature may slightly increase recomputation time. Allow user aborting document recomputation by pressing Esc. This feature may slightly increase recomputation time. Add thumbnail to project file when saving Add thumbnail to project file when saving Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512. Sets the size of the thumbnail that is stored in the document. Common sizes are 128, 256 and 512. Maximum number of backup files to keep when resaving document 문서를 저장할 때 보관할 최대 백업 파일 수 If there is a recovery file available, the application will automatically run a file recovery when it is started If there is a recovery file available, the application will automatically run a file recovery when it is started The program icon will be added to the thumbnail The program icon will be added to the thumbnail Add program icon to the generated thumbnail Add program icon to the generated thumbnail Save auto-recovery information every Save auto-recovery information every Backup files will get extension '.FCbak' and file names get date suffix according to the specified format 백업 파일의 확장자는 '.FCbak'이고 파일 이름에는 지정된 형식에 따라 날짜 접미사가 붙습니다 Use date and FCBak extension 날짜 및 FCBak 확장 사용 Date format 날짜 형식 Document Objects 문서 대상체 Allow objects to have same label 객체가 동일한 레이블을 갖도록 허용하기 Allow duplicate object labels in one document 하나의 문서에 복제된 객체 레이블 허용하기 Enable partial loading of external linked documents. Then only referenced objects and their dependencies will be loaded when a linked document is auto-opened together with the main document. A partially loaded document cannot be edited. Double click the document icon in the tree view to fully reload it. 외부 링크된 문서의 부분적인 불러오기를 비활성화합니다. 그러면 연결된 문서가 기본 문서와 함께 자동으로 열릴 때 참조된 객체와 해당 종속성만 불러옵니다. 부분적으로 불러온 문서는 편집할 수 없습니다. 트리 보기에서 문서 아이콘을 두 번 눌러 문서를 완전히 다시 불러옵니다. Disable partial loading of external linked objects 외부 링크된 객체의 부분 불러오기 비활성화 Authoring and License 저작 및 면허 Author name 저작자 All documents that will be created will get the specified author name. Keep blank for anonymous. You can also use the form: John Doe <john@doe.com> 생성될 모든 문서에는 지정된 작성자 이름이 지정됩니다. 익명을 위해 비워 두십시오. 다음 양식을 사용할 수도 있습니다. Gilong Hong <hong@gildong.com> The field 'Last modified by' will be set to specified author when saving the file 파일을 저장할 때 '마지막 수정자' 필드가 지정된 작성자로 설정됩니다 Set on save 저장 시 설정하기 Company 회사 Default company name to use for new files 새 파일에 사용할 기본 회사 이름 Default license 기본 면허 Default license for new documents 새 문서에 대한 기본 면허 All rights reserved 모든 권리 소유 Creative Commons Attribution 크리에이티브 커먼즈: 저작자표시 Creative Commons Attribution-ShareAlike 크리에이티브 커먼즈: 저작자표시, 동일조건 변경허락 Creative Commons Attribution-NoDerivatives 크리에이티브 커먼즈: 저작자표시, 파생물제작불가 Creative Commons Attribution-NonCommercial 크리에이티브 커먼스: 저작자표시, 비상업적용도 Creative Commons Attribution-NonCommercial-ShareAlike 크리에이티브 커먼즈: 저작자표시, 비상업적용도, 동일조건 번경허락 Creative Commons Attribution-NonCommercial-NoDerivatives 크리에이티브 커먼스: 저작자표시, 비상업적용도, 파생물제작불가 Public Domain 자유 이용 저작물 FreeArt 프리아트 CERN Open Hardware Licence strongly-reciprocal CERN Open Hardware Licence strongly-reciprocal CERN Open Hardware Licence weakly-reciprocal CERN Open Hardware Licence weakly-reciprocal CERN Open Hardware Licence permissive CERN Open Hardware Licence permissive Other 기타 License URL 면허 URL URL describing more about the license 라이선스에 대해 자세히 설명하는 URL Gui::Dialog::DlgSettingsDocumentImp The format of the date to use. 사용할 날짜 형식입니다. Default 기본값 Show format documentation Show format documentation Gui::Dialog::DlgSettingsImage Current screen 현재 화면 Icon 32 x 32 32 x 32 아이콘 Icon 64 x 64 아이콘 64 x 64 Icon 128 x 128 아이콘 128 x 128 Pixel 화소 Image Settings Image Settings Image Dimensions Image Dimensions Standard sizes Standard sizes &Width &Width &Height &Height Aspect ratio Aspect ratio &Screen 화면(&S) Alt+S Alt+S &4:3 &4:3 Alt+4 Alt+4 1&6:9 1&6:9 Alt+6 Alt+6 &1:1 &1:1 Alt+1 Alt+1 Image Properties Image Properties Back&ground Back&ground Creation method Creation method Image Comment Image Comment Current 현재 White 흰색 Black 검정색 Transparent 투명 Insert MIBA MIBA 삽입하기 Insert comment 주석 삽입하기 Add watermark 워터마크 추가하기 Gui::Dialog::DlgSettingsImageImp Offscreen (new) Offscreen (new) Offscreen (old) Offscreen (old) Framebuffer (custom) 프레임버퍼 (사용자지정) Framebuffer (as is) 프레임버퍼 (있는 그대로) Gui::Dialog::DlgSettingsMacro Macro 매크로 Variables defined by macros are created as local variables 매크로에서 정의한 변수가 지역 변수로 생성됨 Run macros in local environment 로컬 환경에서 매크로 실행 The directory in which the application will search for macros 응용 프로그램이 매크로를 검색할 디렉터리 General Macro Settings General Macro Settings Macro Recording Settings Macro Recording Settings Macro Path Macro Path Gui Commands Gui Commands Recorded macros will also contain user interface commands 기록된 매크로에는 사용자 인터페이스 명령도 포함됩니다 Record GUI commands GUI 명령 기록하기 Recorded macros will also contain user interface commands as comments 기록된 매크로에는 주석으로 사용자 인터페이스 명령도 포함됩니다 Record as comment 주석으로 기록하기 Logging Commands 로깅 명령 Commands executed by macro scripts are shown in Python console 매크로 스크립트에 의해 실행된 명령은 Python 콘솔에 표시됩니다 Show script commands in Python console Show script commands in Python console Log all commands issued by menus to file Log all commands issued by menus to file Recent Macros Menu Recent Macros Menu FullScript.FCScript FullScript.FCScript Size of recent macro list 최근 매크로 목록의 크기 How many macros should be listed in recent macros list 최근 매크로 목록에 나열할 매크로 수 Keyboard shortcut count 키보드 단축키 수 How many recent macros should have shortcuts 단축키가 있어야 하는 최근 매크로 수 Keyboard Modifiers 키보드 수정자 Keyboard modifiers, default = Ctrl+Shift+ 키보드 수정자, 기본값 = Ctrl+Shift+ Gui::Dialog::DlgSettingsNavigation Navigation 내비게이션 Steps by turn 회전 단계 Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) 화살표를 사용할 때 회전하는 단계 수 (기본값 = 8: 단계 각도 = 360/8 = 45도) Corner 표시 위치 Top left 왼쪽 상단 Top right 오른쪽 상단 Bottom left 왼쪽 하단 Bottom right 오른쪽 하단 Rotate to nearest 가장 가까운 위치로 회전하기 Font name of the navigation cube 탐색 큐브의 글꼴 이름 Default 기본값 Cube size 입방체 크기 Size of the navigation cube 탐색 입방체의 크기 Opacity when inactive 비활성화시 불투명도 Opacity of the navigation cube when not focused 초점이 맞춰지지 않은 경우 탐색 입방체의 불투명도 Color 색상 Base color for all elements Base color for all elements Sphere size 구체 크기 Color and transparency 색상 및 투명도 The size of the rotation center indicator The size of the rotation center indicator The color of the rotation center indicator The color of the rotation center indicator Navigation settings set 탐색 설정 설정하기 Orbit style 궤도 스타일 Rotation orbit style. Rounded Arcball: moving the mouse in the corners of the screen will only roll the part. Trackball: moving the mouse horizontally will rotate the part around the Y-axis. Trackball Classic: moving the mouse will rotate the part allowing precession. Turntable: the part will be rotated around the Z-axis (with constrained axes). Free Turntable: the part will be rotated around the Z-axis. Rotation orbit style. Rounded Arcball: moving the mouse in the corners of the screen will only roll the part. Trackball: moving the mouse horizontally will rotate the part around the Y-axis. Trackball Classic: moving the mouse will rotate the part allowing precession. Turntable: the part will be rotated around the Z-axis (with constrained axes). Free Turntable: the part will be rotated around the Z-axis. Turntable 턴테이블 Trackball 트랙볼 Free Turntable 자유 회전반 Trackball Classic Trackball Classic Rounded Arcball Rounded Arcball Rotation mode 회전 모드 Rotations in 3D will use current cursor position as center for rotation 3D 회전은 현재 커서 위치를 회전 중심으로 사용합니다 Window center 창 중앙 Drag at cursor 커서에서 드래그 Object center 대상체 중심 Default camera orientation 기본 카메라 방향 Default camera orientation when creating a new document or selecting the home view 새 문서를 만들거나 홈 보기를 선택할 때의 기본 카메라 방향 Camera zoom 카메라 줌 Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. 새 문서에 대한 카메라 줌을 설정합니다. 값은 화면에 맞출 구체의 지름입니다. Animations Animations Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations Enable spinning animations Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration Prevents view tilting when pinch-zooming. Affects only Gesture navigation style. Mouse tilting is not disabled by this setting. Prevents view tilting when pinch-zooming. Affects only Gesture navigation style. Mouse tilting is not disabled by this setting. Space Mouse Space Mouse Enable support of legacy SpaceMouse devices Enable support of legacy SpaceMouse devices Animation duration Animation duration The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds Zoom step Zoom step Navigation Cube Navigation Cube Corner where the navigation cube is displayed Corner where the navigation cube is displayed Rotates to nearest possible state when clicking a face of the cube Rotates to nearest possible state when clicking a face of the cube Font name 글꼴 이름 Rotation Center Indicator Rotation Center Indicator 3D navigation 3D navigation Lists the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Lists the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Mouse Configuration Mouse Configuration Zoom operations will be performed at position of mouse pointer 확대/축소 작업은 마우스 포인터 위치에서 수행됩니다 Zoom at cursor 커서에서 확대/축소하기 How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. 얼마나 확대/축소되는지 여부. '1'의 확대/축소 단계는 모든 확대/축소 단계에 대해 7.5의 계수를 의미합니다. Direction of zoom operations will be inverted 확대/축소 작업의 방향이 반전됩니다 Invert zoom 확대/축소 반전하기 Disable touchscreen tilt gesture 터치스크린 틸트 제스처 비활성화하기 Isometric 아이소메트릭 Dimetric 디메트릭 Trimetric 트라이메트릭 Top 평면 Front 정면 Left 좌측면 Right 우측면 Rear 배면 Bottom 저면 Custom 사용자 정의 Gui::Dialog::DlgSettingsPythonConsole General 일반 Console Console Words will be wrapped when they exceed available horizontal space in Python console Python 콘솔에서 사용 가능한 가로 공간을 초과하면 단어가 줄 바꿈됩니다 Enable word wrap 글자 나누기 사용 The cursor shape will be a block 커서가 곧 잠금됩니다. Enable block cursor 커서 잠금 할성화 Saves Python history across sessions 세션 전반에 걸쳐 Python 내역 저장하기 Save history 내역 저장하기 Python profiler interval (ms) Python profiler interval (ms) The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. The interval in milliseconds at which the profiler runs when there is Python code running (to keep the GUI responding). Set to 0 to disable. Path to external Python executable (optional) Path to external Python executable (optional) ms ms Other 기타 Used for package installation with pip and debugging with debugpy. Autodetected if needed and not specified. Used for package installation with pip and debugging with debugpy. Autodetected if needed and not specified. Gui::Dialog::DlgSettingsSelection Selection 선택항목 Viewport Selection Behavior Viewport Selection Behavior Radius 반지름 Area for selecting elements in the 3D view. A larger value makes it easier to select elements, but may prevent selection of small features. Area for selecting elements in the 3D view. A larger value makes it easier to select elements, but may prevent selection of small features. Enable preselection, highlighted with specified color Enable preselection, highlighted with specified color Enable preselection Enable preselection Preselect the object in the 3D view when hovering the cursor over the tree item Preselect the object in the 3D view when hovering the cursor over the tree item Tree Selection Behavior Tree Selection Behavior Auto expand tree item when the corresponding object is selected in the 3D view Auto expand tree item when the corresponding object is selected in the 3D view Enable selection, highlighted with specified color Enable selection, highlighted with specified color Enable selection Enable selection Auto switch to the 3D view containing the selected item 선택한 항목이 포함된 3D 보기로 자동 전환하기 Record selection in tree view in order to go back/forward using navigation button 탐색 버튼을 사용하여 뒤로/앞으로 가려면 트리 보기에 선택항목 기록하기 Add checkboxes for selection in document tree 문서 트리에서 선택항목을 위한 확인란 추가하기 Gui::Dialog::DlgSettingsViewColor Colors 색상 Background color for the model view 모델 뷰의 배경색 Simple color 간단한 색상 Linear gradient Linear gradient Radial gradient Radial gradient Top: 상단: Middle: 중앙: Color Bar Color Bar Label text color Label text color Label text size Label text size pt pt Switches the colors of the gradient 배경의 색을 전환합니다. Background Color Background Color Background will have the selected color Background will have the selected color Background will have the selected color gradient Background will have the selected color gradient Switch 전환 Top 평면 Middle Middle Color gradient will get the selected color as middle color Color gradient will get the selected color as middle color Bottom 저면 Tree View Tree View Background color for objects in the tree view that are currently edited Background color for objects in the tree view that are currently edited Active container object 활성화된 그릇 대상체 Background color for active containers (e.g. part or body) in the tree view Background color for active containers (e.g. part or body) in the tree view Color bar label text color (e.g. in Mesh and FEM) Color bar label text color (e.g. in Mesh and FEM) Color bar label text size (e.g. in Mesh and FEM) Color bar label text size (e.g. in Mesh and FEM) Middle color 중간 색 Bottom: 하단: Object being edited 편집 중인 대상체 Central: 중앙: Midway: 중간: End: 끝: Gui::Dialog::DlgTipOfTheDay Gui::Dialog::DlgUnitCalculator Input the source value and unit 소스 값 및 단위 입력하기 Units Converter Units Converter as as Input the unit for the result Input the unit for the result => => Result 결과 List of last used calculations. To add a calculation press Return in the value input field 마지막으로 사용한 계산 목록입니다. 계산을 추가하려면 값 입력 필드에서 Enter 키를 누르십시오 Quantity 수량 Unit system Unit system Unit system to be used for the Quantity. The preference system is the one set in the general preferences. Unit system to be used for the Quantity. The preference system is the one set in the general preferences. Decimals Decimals Decimals for the quantity Decimals for the quantity Unit category Unit category Unit category for the quantity Unit category for the quantity Copies the result to the clipboard Copies the result to the clipboard Copy 복사하기 Close 닫기 Gui::Dialog::DlgUnitsCalculator unknown unit: 알 수 없는 단위: unit mismatch 단위 불일치 Gui::Dialog::DockablePlacement Placement 위치 설정 Gui::Dialog::DocumentRecovery Document Recovery 문서 복구 Press 'Start Recovery' to start the recovery process of the document listed below. The 'Status' column shows whether the document could be recovered. 다음 목록에 표시된 문서의 복구 프로세스를 시작하려면 '복구 시작'을 누르십시오. '상태' 컬럼은 문서가 복구 될 수 있는지 표시합니다. Status of recovered documents Status of recovered documents Document name Document name Status 상태 Start Recovery 복구시작 Not yet recovered 아직 복구 되지 않음 Unknown problem occurred 알 수 없는 문제 발생 Failed to recover 복구실패 Successfully recovered 복구성공 &Finish &Finish Delete 삭제 Delete the selected transient directories? Delete the selected transient directories? When deleting the selected transient directory it is not possible to recover any files afterwards. When deleting the selected transient directory it is not possible to recover any files afterwards. Delete all transient directories? Delete all transient directories? When deleting all transient directories it is not possible to recover any files afterwards. When deleting all transient directories it is not possible to recover any files afterwards. Cleanup 제거 Transient directories deleted. 임시 디렉토리가 삭제되었습니다. Gui::Dialog::DownloadItem Save File 파일 저장하기 Download canceled: %1 다운로드 취소됨: %1 Open Containing Folder Open Containing Folder Error opening saved file: %1 저장된 파일 열기 오류: %1 Error saving: %1 %1 저장 오류 Network Error: %1 네트워크 오류: %1 seconds 초 minutes 분 - %4 %5 remaining -%4 %5 남음 %1 of %2 (%3/sec) %4 %1 of %2 (%3/sec) %4 ? ? %1 of %2 - Stopped %1 / %2 - 정지됨. bytes 바이트 kB kB MB MB Gui::Dialog::DownloadManager Downloads 다운로드 Clean Up Clean Up 0 Items 0 항목 Download Manager 다운로드 관리자 1 Download 1개 다운로드 %1 Downloads %1개 다운로드 Gui::Dialog::IconDialog Icon Folders Icon Folders Add icon folder 아이콘 폴더 추가하기 Gui::Dialog::IconFolders Add or remove custom icon folders 사용자 지정 아이콘 폴더 추가 또는 제거하기 Remove folder 폴더 제거 Removing a folder only takes effect after an application restart Removing a folder only takes effect after an application restart Gui::Dialog::InputVector Input Vector Input Vector Vector 벡터 X X Y Y Z Z Gui::Dialog::MouseButtons Mouse Buttons Mouse Buttons Configuration 구성 Selection 선택항목 Panning Panning Rotation 회전 Zooming Zooming Gui::Dialog::ParameterGroup Expand 펼치기 Add sub-group 하위 그룹 추가하기 Remove group 그룹 제거 Add Sub-Group Add Sub-Group Remove Group Remove Group Rename Group Rename Group Export Parameter Export Parameter Import Parameter Import Parameter Remove this parameter group? Remove this parameter group? Import error Import error Rename group 그룹 이름 바꾸기 Export parameter 매개 변수를 내보내기 Import parameter 매개 변수 가져 오기 Collapse 접기 Existing sub-group 존재하는 하위 그룹 The sub-group '%1' already exists. 하위 그룹 '%1'이(가) 이미 있습니다. Export parameter to file 매개 변수를 파일로 내보내기 Import parameter from file 파일에서 매개 변수 가져오기 Reading from '%1' failed. '%1'에서 읽어들이지 못했습니다. Gui::Dialog::ParameterValue New 새로 만들기 Change Value Change Value Remove Key Remove Key Rename Key Rename Key New String Item New String Item New Float Item New Float Item New Integer Item New Integer Item New Unsigned Item New Unsigned Item New Boolean Item New Boolean Item Existing item 존재하는 항목 The item '%1' already exists. 항목 '%1'이(가) 이미 있습니다. Gui::Dialog::Placement Placement 위치 설정 Use center of mass 무게중심 사용 Rotation axis and angle 공전 축과 각도 Translation Translation Axial Axial Shift-click for opposite direction Shift-click for opposite direction Apply Axial Apply Axial Center 중심 Selected Points Selected Points Rotation Rotation Euler angles (Z–Y′–X″) Euler angles (Z–Y′–X″) Axis 축 Angle 각 Yaw (around Z-axis) Yaw (around Z-axis) Pitch (around Y-axis) Pitch (around Y-axis) Roll (around X-axis) Roll (around X-axis) Roll (around the X-axis) Roll (around the X-axis) Apply incremental changes 증분 변경 적용하기 Reset 재설정 Select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. Select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. Incorrect Quantity Incorrect Quantity There are input fields with incorrect input. Ensure valid placement values! There are input fields with incorrect input. Ensure valid placement values! Gui::Dialog::PrintModel Button 버튼 Command 명령 Gui::Dialog::RemoteDebugger Attach to Remote Debugger Attach to Remote Debugger winpdb winpdb Password 암호 Address 주소 Port Port VS Code VS 코드 Gui::Dialog::SceneInspector Dialog 다이얼로그 Refresh 새로 고침 Close 닫기 Gui::Dialog::SceneModel Nodes 노드 Gui::Dialog::TextureMapping Texture 텍스처 Texture Mapping Texture Mapping Global 전역 Environment 환경 정보 Image files (%1) 이미지 파일 (%1) No image 화상이 아닙니다 The specified file is not a valid image file. 이 파일은 유효한 화상 파일이 아닙니다. No 3D view 3D 보기 없음 No active 3D view found. No active 3D view found. Gui::Dialog::Transform Transform 변환하기 Gui::DlgObjectSelection Object Selection 대상체 선택 The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. The selected objects contain other dependencies. Select which objects to export. All dependencies are auto-selected by default. Auto select depending objects 종속 대상체 자동 선택하기 Show dependencies 종속성 표시하기 Depending on 에 따라 Document 문서 Name 이름 Depended by 종속 대상 Selections 선택 All 전체 &Use Original Selection &Use Original Selection Ignore dependencies and proceed with the objects originally selected prior to opening this dialog Ignore dependencies and proceed with the objects originally selected prior to opening this dialog Gui::DlgTreeWidget Dialog 다이얼로그 Items 항목 Gui::DockWnd::ReportOutput Options 옵션 Normal Messages Normal Messages Log Messages Log Messages Critical Messages Critical Messages Redirect Python Output Redirect Python Output Redirect Python Errors Redirect Python Errors Go to End Go to End Save As… Save As… Plain text files Plain text files Warnings 경고 Display Message Types Display Message Types Errors 오류 Show Report View On Show Report View On Clear 지우기 Save Report Output 보고서 출력 저장 Gui::DockWnd::ReportView Output 출력 Python Console Python Console Gui::DockWnd::SelectionView Selection View 선택항목 보기 Search 검색하기 Searches object labels 객체 레이블 검색하기 Clears the search field 검색 필드 지우기 The number of selected items 선택한 항목 수 Picked object list 선택한 대상체 목록 Select Only Select Only Zoom Fit Zoom Fit Go to Selection Go to Selection Mark to Recompute Mark to Recompute Marks this object to be recomputed Marks this object to be recomputed To Python Console To Python Console Duplicate Subshape Duplicate Subshape Selects only this object 이 대상체만 선택하기 Deselect 선택해제 Deselects this object 이 대상체의 선택을 취소 Selects and fits this object in the 3D window 이 대상체를 선택하고 3D 창에 맞춤 Selects and locates this object in the tree view 나무 보기에서 이 대상체를 선택하고 찾습니다 Reveals this object and its subelements in the Python console. 파이썬 콘솔에 이 대상체와 하위 요소를 표시합니다. Creates a standalone copy of this subshape in the document 문서에서 이 하위 모양의 독립 실행형 사본을 만듭니다 Gui::DocumentModel Application 응용 프로그램 Labels & Attributes 레이블 및 특성 Gui::EditorView Modified file 수정된 파일 Unsaved document 저장하지 않은 문서 %1. This has been modified outside of the source editor. Reload it? %1. This has been modified outside of the source editor. Reload it? The document has been modified. Save all changes? The document has been modified. Save all changes? FreeCAD macro FreeCAD 매크로 Export PDF PDF 내보내기 PDF file PDF 파일 untitled[*] 제목없음[*] - Editor - 편집기 %1 chars removed %1자 제거됨 %1 chars added %1 문자 추가됨 Formatted 형식화됨 Gui::FileDialog Save As Save As Open 열기 Gui::FileOptionsDialog Extended 확장 All files (*.*) 모든 파일 (*.*) Gui::Flag Top Left Top Left Bottom Left Bottom Left Top Right Top Right Bottom Right Bottom Right Remove 제거 Gui::GestureNavigationStyle Tap OR click left mouse button. 탭하거나 마우스 왼쪽 버튼을 클릭합니다. Drag screen with two fingers OR press right mouse button. 두 손가락으로 화면을 드래그하거나 마우스 오른쪽 버튼을 누릅니다. Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. Drag screen with one finger OR press left mouse button. In Sketcher and other edit modes, hold Alt in addition. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR PgUp/PgDown on keyboard. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR PgUp/PgDown on keyboard. Gui::GraphvizView Graphviz not found Graphviz를 찾을 수 없습니다 Graphviz couldn't be found on your system. 현재 시스템에서 Graphviz를 찾을 수 없습니다. Read more about it here. 여기에서 자세히 읽어보세요. Do you want to specify its installation path if it's already installed? 이미 설치된 경우 설치 경로를 지정하시겠습니까? Graphviz installation path Graphviz 설치 경로 Graphviz failed Graphviz 실패 Graphviz failed to create an image file Graphviz가 화상 파일을 만들지 못했습니다 PNG format PNG형식 Bitmap format Bitmap형식 GIF format Gif형식 JPG format JPG형식 SVG format SVG형식 PDF format PDF형식 Graphviz format Graphviz format Export graph 그래프 내보내기 Gui::InputField Edit 편집 Save Value Save Value Gui::InventorNavigationStyle Press Ctrl and left mouse button Press Ctrl and left mouse button Press middle mouse button 가운데 마우스 버튼 누르기 Press left mouse button 마우스 왼쪽 버튼 누르기 Scroll mouse wheel Scroll mouse wheel Gui::LabelEditor List 목록 Gui::LocationDialog X X Y Y Z Z User defined… User defined… Wrong direction 잘못된 방향 Direction must not be the null vector 방향은 null 벡터가 아니어야 합니다 Gui::LocationWidget X: X: Y: Y: Z: Z: Direction: 방향: Gui::MacroCommand Macros 매크로 Macro file doesn't exist 매크로 파일이 없습니다. No such macro file: '%1' 해당 매크로 파일이 없습니다: '%1' Gui::MainWindow Dimension 치수 Notification Area A context menu action used to show or hide the 'notificationArea' toolbar widget 알림 영역 Ready 준비 Close All 모두 닫기 Toggles this toolbar 이 도구 모음 전환하기 Toggles this dockable window 이 도킹 가능 창 전환하기 Safe mode enabled Safe mode enabled FreeCAD is now running in safe mode. FreeCAD is now running in safe mode. Safe mode temporarily disables your configurations and addons. Restart the application to exit safe mode. Safe mode temporarily disables your configurations and addons. Restart the application to exit safe mode. Unsaved document 저장하지 않은 문서 The exported object contains external link. Save the documentat least once before exporting. The exported object contains external link. Save the documentat least once before exporting. To link to external objects, the document must be saved at least once. Save the document now? To link to external objects, the document must be saved at least once. Save the document now? Safe Mode 안전 모드 Gui::ManualAlignment Manual alignment 수동 정렬 The alignment is already in progress. 정렬이 이미 진행 중입니다. Alignment[*] 정렬(*)... Select at least 1 point in the left and the right view Select at least 1 point in the left and the right view Select at least %1 points in the left and the right view Select at least %1 points in the left and the right view Select points in the left and right view Select points in the left and right view The alignment has finished 정렬 되었습니다. The alignment has been canceled 정렬이 취소되었습니다 Too few points picked in the left view. At least %1 points are needed. 왼쪽 보기에서 선택한 포인트가 너무 적습니다. 최소한 %1포인트가 필요합니다. Too few points picked in the right view. At least %1 points are needed. 오른쪽 보기에서 선택한 포인트가 너무 적습니다. 최소한 %1포인트가 필요합니다. Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. 왼쪽 및 오른쪽 보기에서 선택한 포인트 수가 다릅니다. 왼쪽 보기에서 %1 포인트가 선택되고, 오른쪽 보기에서 %2 포인트가 선택됩니다. Try to align group of views 보기 그룹을 정렬합니다 The alignment failed. How do you want to proceed? 정렬에 실패했습니다. 어떻게 진행하길 원합니까? Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. 왼쪽 및 오른쪽 보기에서 선택한 포인트 수가 다릅니다. 왼쪽 보기에서 %1 포인트가 선택되고 오른쪽 보기에서 %2 포인트가 선택됩니다. Point_%1 포인트_%1 Point picked at (%1,%2,%3) (%1,%2,%3)에서 선택한 포인트 No point was found on model 모델에서 포인트를 찾을 수 없습니다 No point was picked 포인트가 선택되지 않았습니다 &Align 정렬하기(&A) &Remove Last Point &Remove Last Point &Synchronize Views &Synchronize Views &Cancel 취소하기(&C) Gui::MayaGestureNavigationStyle Tap OR click left mouse button. 탭하거나 마우스 왼쪽 버튼을 클릭합니다. Drag screen with two fingers OR press Alt + middle mouse button. Drag screen with two fingers OR press Alt + middle mouse button. Drag screen with one finger OR press Alt + left mouse button. In Sketcher and other edit modes, hold Alt in addition. Drag screen with one finger OR press Alt + left mouse button. In Sketcher and other edit modes, hold Alt in addition. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll mouse wheel OR press Alt + right mouse button OR PgUp/PgDown on keyboard. Gui::ModifierLineEdit Press modifier keys 수식 키 누르기 Gui::OpenCascadeNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press Ctrl and middle mouse button Press Ctrl and middle mouse button Press Ctrl and right mouse button Press Ctrl and right mouse button Press Ctrl and left mouse button Press Ctrl and left mouse button Gui::OpenSCADNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press right mouse button and move mouse 마우스 오른쪽 버튼을 누르고 마우스 이동하기 Press left mouse button and move mouse 마우스 왼쪽 버튼을 누르고 마우스 이동하기 Press middle mouse button or SHIFT and right mouse button 마우스 가운데 버튼 누르기 또는 SHIFT 키와 마우스 오른쪽 버튼 누르기 Gui::PrefQuantitySpinBox Edit 편집 Save Value Save Value Clear List Clear List Gui::ProgressBar Remaining: %1 남은 시간: %1 Aborting 중단 Abort the operation? Abort the operation? Gui::ProgressDialog Remaining: %1 남은 시간: %1 Aborting 중단 Abort the operation? Abort the operation? Gui::PropertyEditor::LinkSelection Error 오류 Object not found 대상체를 찾을 수 없습니다 Gui::PropertyEditor::PropertyEditor Edit 편집 property 속성 Copy 복사하기 Add Property Add Property Rename Property Group Rename Property Group Rename Property Rename Property Edit Property Tooltip Edit Property Tooltip Delete Property Delete Property Tooltip 툴팁 Rename property Rename property Show Hidden Show Hidden Auto-Expand Auto-Expand Expression 표현식 Property name Property name Rename property group 속성 그룹 이름 바꾸기 Group name: 그룹이름: Gui::PropertyEditor::PropertyModel Property 속성 Value 값 Gui::PropertyView View 보기 Data 자료 Gui::PythonConsole System exit 시스템 종료 The application is still running. Exit without saving all data? The application is still running. Exit without saving all data? Unhandled PyCXX exception. 처리되지 않은 PyCXX 예외입니다. Python Console Python Console Unhandled FreeCAD exception. 처리되지 않은 FreeCAD 예외입니다. Unhandled std C++ exception. 처리되지 않은 표준 C++ 예외입니다. Unhandled unknown C++ exception. 처리되지 않은 알 수 없는 C++ 예외입니다. &Copy 복사하기(&C) &Copy Command &Copy Command &Copy History &Copy History Save History As… Save History As… Saves Python history across %1 sessions %1 세션 전반에 걸쳐 Python 내역 저장하기 &Paste 붙여넣기(&P) Select All 모두 선택 Save History 내역 저장하기 Clear Console Clear Console Insert File Name… Insert File Name… Word Wrap Word Wrap Macro Files 매크로 파일 Insert file name 파일 이름 삽입 All Files 모든 파일 Gui::PythonEditor Comment 주석 Uncomment 주석 해제 Execute in Console Execute in Console Gui::RecentFilesAction Clear Recent Files Empties the list of recent files Clear Recent Files Open file %1 파일 열기 %1 Gui::RecentMacrosAction none 없음 Run macro %1 (Shift+click to edit) keyboard shortcut: %2 매크로 %1 실행(편집하려면 Shift+클릭) 키보드 단축키: %2 Gui::RevitNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press middle mouse button 가운데 마우스 버튼 누르기 Press Shift and middle mouse button Press Shift and middle mouse button Scroll middle mouse button 가운데 마우스 버튼 스크롤 Gui::SearchBar Previous 이전 Next 다음 Case sensitive 대/소문자 구분 Whole words 전체 단어 Gui::SelectModule Select Module Select Module Open %1 as 다음으로 %1 열기 Gui::StdCmdDescription Des&cription 설명(&C) Long description of commands 명령에 대한 자세한 설명 Gui::StdCmdDownloadOnlineHelp Download Online Help Download Online Help Downloads %1's online help Downloads %1's online help Non-existing directory 기존 디렉터리가 없습니다 The directory '%1' does not exist. Specify an existing directory? The directory '%1' does not exist. Specify an existing directory? You don't have write permission to '%1' Specify another directory? You don't have write permission to '%1' Specify another directory? Missing permission 권한 없음 Stop downloading 다운로드 중지 Gui::TaskBoxAngle Angle 각 Gui::TaskBoxPosition Position 위치 Gui::TaskElementColors Set Element Color Set Element Color TextLabel 텍스트 라벨 Edit 편집 Hide 숨기기 Remove 제거 Remove All Remove All Box Select Box Select On top when selected On top when selected Recompute after commit 커밋 후 다시 재계산 Gui::TaskView::TaskAppearance Appearance 외관 Document window Document window Plot mode Plot mode Point size 점 크기 Line width 선 두께 Transparency 투명도 Gui::TaskView::TaskDialog A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. Gui::TaskView::TaskEditControl Edit 편집 Gui::TaskView::TaskSelectLinkProperty Appearance 외관 edit selection 선택항목 편집하기 Gui::TextDocumentEditorView Edit text 텍스트 편집 Gui::TinkerCADNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press middle mouse button 가운데 마우스 버튼 누르기 Press right mouse button 마우스 오른쪽 버튼 누르기 Scroll mouse wheel Scroll mouse wheel Gui::TouchpadNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press Shift button Press Shift button Press Alt button Press Alt button Press Ctrl and Shift buttons Press Ctrl and Shift buttons Gui::Translator Afrikaans 아프리칸스어 Arabic 아랍어 Basque 바스크어 Belarusian 벨라루스어 Bulgarian 불가리아어 Catalan 카탈로니아어 Chinese (Simplified) Chinese Simplified Chinese (Simplified) Chinese (Traditional) Chinese Traditional Chinese (Traditional) Croatian 크로아티아어 Czech 체코어 Dutch 네덜란드어 English 영어 Filipino 필리핀어 Finnish 핀란드어 French 프랑스어 Galician 갈리시아어 German 독일어 Greek 그리스어 Hungarian 헝가리어 Indonesian 인도네시아어 Italian 이탈리아어 Japanese 일본어 Kabyle 커바일어 Korean 한국어 Lithuanian 리투아니아어 Norwegian 노르웨이어 Polish 폴란드어 Portuguese (Brazilian) Portuguese, Brazilian Portuguese (Brazilian) Portuguese 포르투갈어 Romanian 루마니아어 Russian 러시아어 Serbian 세르비아어 Serbian (Latin) Serbian, Latin Serbian (Latin) Slovak 슬로바키아어 Slovenian 슬로베니아어 Spanish 스페인어 Spanish (Argentina) Spanish, Argentina Spanish (Argentina) Swedish 스웨덴어 Turkish 터키어 Ukrainian 우크라이나어 Valencian 발센시아어 Vietnamese 베트남어 Malay Malay Danish 덴마크어 Georgian 조지아어 Operating system 운영 체제 Selected language 선택된 언어 C/POSIX C/POSIX Gui::TreePanel Search 검색하기 Gui::TreeWidget Activate Document Activate Document Activates document %1 Activates document %1 Tree Settings Tree Settings Show Description Show Description Show Internal Name Show Internal Name Shows a description column for items. An item's description can be set by by editing the 'label2' property. Shows a description column for items. An item's description can be set by by editing the 'label2' property. Shows an internal name column for items. Shows an internal name column for items. Group 그룹 Error 오류 File does not exist. File does not exist. Failed to open directory. Failed to open directory. Labels & Attributes 레이블 및 특성 Description 설명 Internal name 내부 이름 Show Items Hidden in Tree View Show Items Hidden in Tree View Shows items that are marked as 'hidden' in the tree view Shows items that are marked as 'hidden' in the tree view Toggle Visibility in Tree View Toggle Visibility in Tree View Create Group Create Group Creates a group Creates a group Renames object Renames object Finish Editing Finish Editing Finishes editing object Finishes editing object Add Dependent Objects to Selection Add Dependent Objects to Selection Close Document Close Document Closes the document Closes the document Reveals the current file location in Finder Reveals the current file location in Finder Opens the current file location Opens the current file location Reload Document Reload Document Reloads a partially loaded document Reloads a partially loaded document Skip Recomputes Skip Recomputes Enables or disables the recomputations of document Enables or disables the recomputations of document Allow Partial Recomputes Allow Partial Recomputes Enables or disables the recomputating editing object when 'skip recomputation' is enabled Enables or disables the recomputating editing object when 'skip recomputation' is enabled Mark to Recompute Mark to Recompute Marks this object to be recomputed Marks this object to be recomputed Recompute Object Recompute Object Recomputes the selected object Recomputes the selected object Toggles the visibility of selected items in the tree view 트리 뷰에서 선택 항목의 표시여부를 토글함 Search Objects Search Objects Searches for objects in the tree Searches for objects in the tree Rename 이름 바꾸기 Adds all dependent objects to the selection 모든 종속 대상체를 선택 항목에 추가합니다 Reveal in Finder Reveal in Finder Open File Location 파일 위치 열기 (but must be executed) (단, 실행해야 함) %1, Internal name: %2 %1, 내부 이름: %2 Gui::VectorListEditor Vectors 벡터 Table 테이블 Copy Table Copy Table Paste Table Paste Table Gui::View3DInventor Export PDF PDF 내보내기 PDF file PDF 파일 Opening file failed 파일 열기 실패 Can't open file '%1' for writing. 쓰기에 사용할 '%1' 파일을 열 수 없습니다. Gui::WorkbenchGroup Selects the '%1' workbench Selects the '%1' workbench Select the '%1' workbench '%1' 작업대 선택하기 MAC_APPLICATION_MENU Services 서비스 Hide %1 %1 숨기기 Hide Others 다른 항목 숨기기 Show All 모두 표시하기 Preferences 환경설정 Quit %1 %1 종료 About %1 %1 정보 NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> <qt>%2에 "%1"의 사용자 이름과 암호를 입력하십시오</qt> <qt>Connect to proxy "%1" using:</qt> <qt>다음을 사용하여 프록시 "%1"에 연결합니다:</qt> Position X X Y Y Z Z Grid snap in Grid snap in 0.1 mm 0.1mm 0.5 mm 0.5mm 1 mm 1mm 2 mm 2mm 5 mm 5mm 10 mm 10mm 20 mm 20mm 50 mm 50mm 100 mm 100mm 200 mm 200mm 500 mm 500mm 1 m 1 m 2 m 2 m 5 m 5 m PropertyListDialog Invalid input 잘못 된 입력 Input in line %1 is not a number 줄에 있는 입력%1 이 숫자가 아닙니다. QDockWidget Tasks 작업 Selection View 선택항목 보기 Report View Report View Python Console Python Console Tree View Tree View Property View Property View Task List 작업 목록 Model 모형 DAG View DAG 보기 QObject General 일반 Display 화면 Workbenches 작업대 Import-Export 가져오기 내보내기 Python 파이썬 Unknown filetype 알 수 없는 파일유형 Cannot open unknown filetype: %1 알 수 없는 파일유형을 열 수 없습니다: %1 Export failed 내보내기 실패 Cannot save to unknown filetype: %1 알 수 없는 파일유형에 저장할 수 없습니다. %1 Recomputation required 재계산 필요 Some documents require recomputation for migration purposes. It is highly recommended to perform a recomputation before any modification to avoid compatibility problems. Recompute now? Some documents require recomputation for migration purposes. It is highly recommended to perform a recomputation before any modification to avoid compatibility problems. Recompute now? Failed to recompute some documents. Check the report view for more details. Failed to recompute some documents. Check the report view for more details. Recompute error 재계산 오류 Workbench failure 작업대 실패 %1 %1 This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Upgrade the graphics driver and/or card as required. Invalid OpenGL Version Invalid OpenGL Version Welcome to %1 v%2.%3 Welcome to %1 v%2.%3 Welcome to %1 v%2.%3 Welcome to %1 v%2.%3 Configuration data and addons from previous program version found. Migrate the old configuration to this version? Configuration data and addons from previous program version found. Migrate the old configuration to this version? Migrating Migrating Migrating configuration data and addons... Migrating configuration data and addons... Migration complete. Restarting... Migration complete. Restarting... Restarting Restarting Migration failed Migration failed Migration failed. See the Report View for details. Migration failed. See the Report View for details. Exception 예외 Open document 문서 열기 Error 오류 There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. 파일을 불러오는 동안 오류가 발생했습니다. 일부 데이터가 수정되었거나 전혀 복구되지 않았을 수 있습니다. 관련된 객체에 대한 보다 구체적인 정보는 보고서 보기에서 확인하십시오. There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. 파일을 불러오는 동안 심각한 오류가 발생했습니다. 일부 데이터가 수정되었거나 전혀 복구되지 않았을 수 있습니다. 프로젝트를 저장하면 데이터가 손실될 가능성이 높습니다. Import file 가져오기 Export file 파일로 내보내기 Printing… 인쇄중… Exporting PDF… PDF로 내보내기… The exported object contains an external link. Save the document.at least once before exporting. The exported object contains an external link. Save the document.at least once before exporting. Copy Selected 선택된 것 복사 Copy Active Document 활성화된 문서 복사 Copy All Documents 모든 문서 복사 Failed to parse some of the expressions. Check the report view for more details. Failed to parse some of the expressions. Check the report view for more details. Unsaved document 저장하지 않은 문서 Delete failed 삭제 실패 Dependency error 종속성 오류 Paste 붙여넣기 Expression error 표현식 오류 Failed to paste expressions 식을 붙여넣지 못했습니다. Cannot load workbench 작업대를 불러올 수 없습니다 A general error occurred while loading the workbench 작업대를 불러오는 동안 일반 오류가 발생했습니다 Restart in Safe Mode Restart in Safe Mode Restart FreeCAD and enter safe mode? Restart FreeCAD and enter safe mode? Safe mode temporarily disables the configuration and addons. Safe mode temporarily disables the configuration and addons. &Save Views… &Save Views… &Load Views… &Load Views… F&reeze View F&reeze View &Clear Views &Clear Views Restore view &%1 보기 %1 복원하기(&%) Save frozen views 고정된 뷰 저장 Frozen views 고정된 뷰 Restore views 뷰 저장하기 Importing the restored views would clear the already stored views. Continue? Importing the restored views would clear the already stored views. Continue? Save Image Save Image Choose an Image File to Open Choose an Image File to Open Restore frozen views 고정된 뷰 저장 Cannot open file '%1'. '%1' 파일을 열 수 없습니다. Restore View &%1 Restore View &%1 files 파일 New sub-group 새 하위 모둠 Enter the name: 이름 입력 New text item 새 텍스트 항목 New integer item 새 정수 항목 New unsigned item 새 무부호 항목 New float item 새 부동 소수점 항목 Choose an item: 항목 고르기: New boolean item 새 불리언 항목 Enter text: Enter text: Enter number: Enter number: New Unsigned Item New Unsigned Item Rename group 모둠 이름 바꾸기 The group '%1' cannot be renamed. 모둠 '%1'의 이름을 바꿀 수 없습니다. Existing group 존재하는 모둠 The group '%1' already exists. 모둠 '%1'이 이미 존재합니다. Change value 값 변경 Change Value Change Value (%1 times) (%1 times) Type 유형 Notifier 알림이 Message 메시지 Notifier: 알림: Skip confirmation of further critical message notifications while loading the file? Skip confirmation of further critical message notifications while loading the file? Critical message Critical message Too many opened non-intrusive notifications. Notifications are being omitted! Too many opened non-intrusive notifications. Notifications are being omitted! Identical physical path detected. It may cause unwanted overwrite of existing document! 동일한 물리적 경로가 감지되었습니다. 존재하는 문서의 원치 않는 덮어쓰기가 발생할 수 있습니다! Are you sure you want to continue? 계속 진행 하시겠습니까? Check report view for more… Check report view for more… Physical path: 물리적 경로: Document: 문서: Path: 경로: Identical physical path 동일한 물리적 경로 Could not save document 문서를 저장할 수 없습니다 There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: "%1" Would you like to save the file with a different name? 파일을 저장하는 동안 문제가 발생했습니다. 이는 일부 상위 폴더가 없거나 사용자에게 충분한 권한이 없거나 다른 이유로 인해 발생할 수 있습니다. 오류 세부정보: "%1" 파일을 다른 이름으로 저장하시겠습니까? Saving aborted 저장 실패 Save dependent files 종속 파일 저장하기 The file contains external dependencies. Do you want to save the dependent files, too? 파일에 외부 종속성이 있습니다. 종속 파일도 저장하시겠습니까? Saving document failed 문서 저장 실패 Save document under new filename… Save document under new filename… Save a copy of the document under new filename… Save a copy of the document under new filename… Save %1 Document %1 문서 저장 Document 문서 Failed to save document 문서 저장 실패 Documents contains cyclic dependencies. Do you still want to save them? 문서에는 주기적 종속성이 포함되어 있습니다. 아직도 저장하길 원하나요? %1 document (*.FCStd) %1 문서 (*.FCStd) Document not closable 문서를 닫을 수 없습니다 The document is not closable for the moment. 그 문서는 당분간 닫을 수 없다. Failed to save document '%1'. Would you like to cancel the closure? Failed to save document '%1'. Would you like to cancel the closure? Document saving failed. Would you like to cancel the closure? Document saving failed. Would you like to cancel the closure? Unable to save document 문서를 저장할 수 없음 Undo 실행 취소 Redo 다시 실행 There are grouped transactions in the following documents with other preceding transactions 다음 문서에 다른 이전 트랜잭션과 함께 그룹화된 트랜잭션이 있습니다. Choose 'Yes' to roll back all preceding transactions. Choose 'No' to roll back in the active document only. Choose 'Abort' to abort 이전 트랜잭션을 모두 롤백하려면 '예'를 고르십시오. 현재 문서에서만 롤백하려면 '아니오'를 고르십시오. 중단하려면 '중단하기'를 고르십시오 Save Macro 매크로 저장하기 Finish 마침 Clear 지우기 Cancel 취소하기 Inner 안쪽 Outer 바깥쪽 Split 분할 No Browser 브라우저 없음 No Server 서버 없음 Unable to start the server to port %1: %2. Unable to start the server to port %1: %2. Unable to open your system browser. 시스템 브라우저를 열 수 없습니다. Out of memory 메모리 부족 Not enough memory available to display the data. 데이터를 화면표시하는 데 사용할 수 있는 메모리가 충분하지 않습니다. Cannot find file %1 %1 파일을 찾을 수 없습니다 Cannot find file %1 neither in %2 nor in %3 %2 또는 %3에서 %1 파일을 찾을 수 없습니다 Navigation styles 탐색 스타일 Clarify Selection Clarify Selection Transform 변환하기 Unsaved Document 저장되지 않은 문서 Save all changes to document '%1' before closing? Save all changes to document '%1' before closing? Save all changes to document before closing? Save all changes to document before closing? Otherwise, all changes will be lost. 그렇지 않으면, 모든 변경사항을 잃게 됩니다. %1 Document(s) not saved %1문서가 저장되지 않았습니다. Some documents could not be saved. Cancel closing? Some documents could not be saved. Cancel closing? Delete macro 매크로 삭제 Not allowed to delete system-wide macros 시스템 전체 매크로 삭제가 허용되지 않음 Delete group content? 모둠 내용을 삭제하시겠습니까? The %1 is not empty, delete its content as well? %1이 비어 있지 않습니다. 내용도 삭제하시겠습니까? Translation: 이동: Translation XY: Translation XY: Rotation: 회전: Simple Group Simple Group Group With Links Group With Links Group With Transform Links Group With Transform Links Create link group failed 링크 모둠 만들기 실패함 Create link failed 링크 만들기 실패함 Failed to create relative link 상대 링크를 만들지 못했습니다 Unlink failed 링크 해제 실패함 Replace link failed 링크 바꾸기 실패함 Failed to import links 링크를 가져오지 못했습니다 Failed to import all links 모든 링크를 가져오지 못했습니다 Add property 속성 추가하기 Failed to add property to '%1': %2 '%1'에 속성을 추가하지 못했습니다: %2 Drag & drop failed 드래그 엔 드랍 실패 Apply to all 모두에 적용하기 Setup Configurable Object Setup Configurable Object Selects which object to copy or exclude when configuration changes. All external linked objects are excluded by default. Selects which object to copy or exclude when configuration changes. All external linked objects are excluded by default. Select which objects to copy when the configuration is changed Select which objects to copy when the configuration is changed Applies the setting to all links Applies the setting to all links Copy on Change Copy on Change Enable 활성화 Enable auto copy of linked object when its configuration is changed 구성이 변경되면 링크된 객체의 자동 복사 활성화하기 Tracking 트래킹 Copies the linked object when its configuration is changed. Also auto redo the copy if the original linked object is changed. Copies the linked object when its configuration is changed. Also auto redo the copy if the original linked object is changed. Disable Copy on Change Disable Copy on Change Refresh Configurable Object Refresh Configurable Object Synchronizes the original configurable source object by creating a new deep copy. Any changes made to the current copy will be lost. Synchronizes the original configurable source object by creating a new deep copy. Any changes made to the current copy will be lost. Toggle Array Elements Toggle Array Elements Changes whether to show each link array element as individual objects Changes whether to show each link array element as individual objects Transforms the object at the origin of the placement Transforms the object at the origin of the placement Override Colors Override Colors Edit %1 수정 Color Gradient 색상 그레이디언트 Color Legend 색상 범례 Toggle overlay 오버레이 전환 Toggle floating window 플로팅 창 전환 Close dock window Close dock window Tree view 트리 보기 Item background padding Item background padding Overlay Overlay Advanced Advanced Font size 글꼴 크기 Delay mouse wheel pass through Delay mouse wheel pass through Alpha test radius Alpha test radius Hint trigger size Hint trigger size Hint width Hint width Left panel hint offset Left panel hint offset Left panel hint length Left panel hint length Right panel hint offset Right panel hint offset Right panel hint length Right panel hint length Top panel hint offset Top panel hint offset Top panel hint length Top panel hint length Bottom panel hint offset Bottom panel hint offset Bottom panel hint length Bottom panel hint length Hint delay Hint delay Splitter auto hide delay Splitter auto hide delay Layout delay Layout delay Animation duration Animation duration Activate on hover Activate on hover Check navigation cube Check navigation cube Animation curve type Animation curve type Suppressed 억제 WARNING: This is a development version. 경고: 이것은 개발용 버전입니다. Do not use it in a production environment. Do not use it in a production environment. Press Esc to hide hint Press Esc to hide hint Options 옵션 Change Image Change Image Active Object 활성화된 대상체 Edit Text Edit Text Close this dialog? 이 대화창을 닫을까요? Select Group Contents Select Group Contents Selects all objects that are children of this group Selects all objects that are children of this group SelectionFilter Not allowed: 허용 되지 않습니다. Selection not allowed by filter 필터에서 허용되지 않는 선택 StdCmdAbout &About %1 %1 정보(&A) Displays information about %1 Displays information about %1 StdCmdAboutQt About &Qt Qt 정보(&Q) Displays information about Qt Displays information about Qt StdCmdActivateNextWindow &Next &Next Activates the next window Activates the next window StdCmdActivatePrevWindow &Previous &Previous Switches to the previously active window Switches to the previously active window StdCmdCascadeWindows &Cascade 계단식 창 배열(&C) Tiles pragmatic Tiles pragmatic StdCmdCloseActiveWindow &Close 닫기(&C) Closes the active window Closes the active window StdCmdCloseAllWindows Close A&ll Close A&ll Closes all windows Closes all windows StdCmdCopy &Copy 복사하기(&C) Copies the selection to the clipboard Copies the selection to the clipboard StdCmdCut Cu&t Cu&t Removes the selection and copies it to the clipboard Removes the selection and copies it to the clipboard StdCmdDelete &Delete 삭제하기(&D) Deletes the selected objects 선택한 대상체 삭제하기 StdCmdDlgMacroRecord Record &Macro Record &Macro Opens a dialog to record a macro 매크로를 기록하기 위한 대화 상자를 엽니다 S&top macro recording 매크로 기록 중지하기(&S) Stop the macro recording session 메크로 기록 세션 중지 StdCmdDockViewMenu &Panels &Panels Lists available dock panels Lists available dock panels StdCmdEdit Toggle &Edit Mode Toggle &Edit Mode Toggles the selected object's edit mode 선택한 대상체의 편집 모드를 전환합니다 StdCmdExport &Export… &Export… Exports an object in the active document Exports an object in the active document No selection 선택 안 함 Select objects to export before using the Export command. Select objects to export before using the Export command. StdCmdExpression Expression Actions Expression Actions Actions that apply to expressions Actions that apply to expressions StdCmdFeatRecompute &Recompute 다시 계산하기(&R) Recomputes a feature or document Recomputes a feature or document StdCmdFreeCADForum FreeCAD &Forum FreeCAD &Forum The FreeCAD forum, where you can find help from other users FreeCAD 포럼에서 다른 사용자의 도움말을 찾을 수 있습니다. StdCmdFreezeViews F&reeze Display F&reeze Display Freezes the current view position 현재 보기 위치를 고정합니다 StdCmdImport &Import… &Import… Imports a file into the active document Imports a file into the active document Supported formats 지원되는 형식 All files (*.*) 모든 파일 (*.*) StdCmdLinkSelectActions &Link Navigation &Link Navigation Link navigation actions 링크 탐색 작업 StdCmdLinkUnlink Unlink 연결 해제 Unlinks the object by placing it directly in the container Unlinks the object by placing it directly in the container StdCmdMergeProjects &Merge Document &Merge Document Merges another FreeCAD document into the active one Merges another FreeCAD document into the active one Merge document 문서 병합 %1 document (*.FCStd) %1 문서 (*.FCStd) Cannot merge document with itself. Cannot merge document with itself. StdCmdNew Unnamed 이름없음 &New Document &New Document Creates a new empty document Creates a new empty document StdCmdOnlineHelpWebsite Help Website 도움말 웹 사이트 Opens the help documentation Opens the help documentation StdCmdOpen &Open… &Open… Opens a document or imports files Opens a document or imports files Supported formats 지원되는 형식 All files (*.*) 모든 파일 (*.*) Cannot open file 파일을 열 수 없습니다 Loading the file %1 is not supported 파일 %1 읽기는 지원하지 않습니다 StdCmdPaste &Paste 붙여넣기(&P) Pastes the contents of the clipboard Pastes the contents of the clipboard StdCmdQuit E&xit 종료(&X) Quits the application 프로그램 종료 StdCmdRecentFiles Open &Recent Open &Recent Displays the list of recently opened files Displays the list of recently opened files StdCmdRedo &Redo 다시 실행(&R) Redoes a previously undone action 실행 취소한 작업을 다시 실행합니다 StdCmdRevert Rever&t Rever&t Reverts to the saved version of this file 저장된 버전의 파일로 되돌리기 StdCmdSave &Save 저장하기(&S) Saves the active document Saves the active document StdCmdSaveAll Sa&ve All Sa&ve All Saves all open documents Saves all open documents StdCmdSelectAll Select &All 모두 선택하기(&A) Selects all objects in the active document Selects all objects in the active document StdCmdSendToPythonConsole &Send to Python Console Python 콘솔로 보내기(&S) Sends the selected object to the Python console 선택한 대상체를 파이썬 콘솔로 보냅니다 StdCmdStatusBar Status Bar Status Bar Toggles the status bar 상태 표시줄을 전환합니다 StdCmdTileWindows &Tile 바둑판 배열(&T) Tiles the windows Tiles the windows StdCmdToolBarMenu &Toolbars &Toolbars Toggles this window 이 창 전환하기 StdCmdUndo &Undo 실행 취소(&U) Undoes the previous action Undoes the previous action StdCmdViewBottom &5 Bottom &5 Bottom Sets the camera to the bottom view Sets the camera to the bottom view StdCmdViewDimetric &Dimetric &Dimetric Sets the camera to the dimetric view Sets the camera to the dimetric view StdCmdViewExample1 Inventor Example #1 Inventor Example #1 Shows a 3D texture with manipulator 조작기로 3D 텍스처를 표시합니다 StdCmdViewExample2 Inventor Example #2 Inventor Example #2 Shows spheres and drag-lights 구체 및 드래그 라이트 표시하기 StdCmdViewFront &1 Front &1 Front Sets the camera to the front view Sets the camera to the front view StdCmdViewHome &Home &Home Sets the camera to the default home view Sets the camera to the default home view StdCmdViewIsometric &Isometric &Isometric Sets the camera to the isometric view Sets the camera to the isometric view StdCmdViewIvStereoInterleavedColumns Stereo Interleaved &Columns Stereo Interleaved &Columns Switches stereo viewing to interleaved columns Switches stereo viewing to interleaved columns StdCmdViewIvStereoInterleavedRows Stereo Interleaved &Rows Stereo Interleaved &Rows Switches stereo viewing to interleaved rows Switches stereo viewing to interleaved rows StdCmdViewIvStereoOff Stereo &Off Stereo &Off Switches stereo viewing off Switches stereo viewing off StdCmdViewLeft &6 Left &6 Left Sets the camera to the left view Sets the camera to the left view StdCmdViewRear &4 Rear &4 Rear Sets the camera to the rear view Sets the camera to the rear view StdCmdViewRight &3 Right &3 Right Sets the camera to the right view Sets the camera to the right view StdCmdViewRotateLeft Rotate &Left Rotate &Left Rotates the view by 90° counter-clockwise Rotates the view by 90° counter-clockwise StdCmdViewTop &2 Top &2 Top Sets the camera to the top view Sets the camera to the top view StdCmdViewTrimetric &Trimetric &Trimetric Sets the camera to the trimetric view Sets the camera to the trimetric view StdCmdWhatsThis &What's This? 이건 뭔가요?(&W) Opens the documentation for the selected command Opens the documentation for the selected command StdCmdWindowsMenu Activate Window Activate Window Activates this window 다음 창 활성화하기 StdCmdWorkbench &Workbench &Workbench Switches between workbenches Switches between workbenches StdMainFullscreen Fullscreen 전체 화면 Displays the main window in fullscreen mode Displays the main window in fullscreen mode StdOrthographicCamera Orthographic View Orthographic View Switches to orthographic view mode 조감도 보기 모드로 전환 StdPerspectiveCamera Perspective View Perspective View Switches to perspective view mode 투시도 보기 모드로 전환 StdTreeCollapseDocument Collapse/E&xpand Collapse/E&xpand Expands the active document and collapses all others Expands the active document and collapses all others StdTreePreSelection &4 Preselection &4 Preselection Preselects the object in 3D view when hovering the cursor over the tree item Preselects the object in 3D view when hovering the cursor over the tree item StdViewDock &Docked &Docked Displays the active view either in fullscreen, undocked, or docked mode Displays the active view either in fullscreen, undocked, or docked mode StdViewFullscreen &Fullscreen &Fullscreen Displays the active view either in fullscreen, undocked, or docked mode Displays the active view either in fullscreen, undocked, or docked mode StdViewScreenShot Save &Image… Save &Image… Creates a screenshot of the active view 액티브 뷰의 스크린샷을 만듭니다. StdViewUndock &Undocked &Undocked Displays the active view either in fullscreen, undocked, or docked mode Displays the active view either in fullscreen, undocked, or docked mode StdViewZoomIn Zoom &In Zoom &In Increases the zoom factor by a fixed amount Increases the zoom factor by a fixed amount StdViewZoomOut Zoom &Out Zoom &Out Decreases the zoom factor by a fixed amount Decreases the zoom factor by a fixed amount Std_Delete The following referencing objects might break. Continue? The following referencing objects might break. Continue? Object dependencies 대상체 종속성 Std_DrawStyle &1 As is &1 As is Normal mode 보통 모드 &2 Points &2 Points &3 Wireframe &3 Wireframe &4 Hidden line &4 Hidden line &5 No shading &5 No shading &6 Shaded &6 Shaded &7 Flat lines &7 Flat lines Points mode 포인트 모드 Wireframe mode 철사틀 모드 Hidden line mode 은선 모드 No shading mode 음영 없음 모드 Shaded mode 음영 처리 모드 Flat lines mode 평평한 라인 모드 Std_DuplicateSelection Object dependencies 대상체 종속성 To link to external objects, the document must be saved at least once. Save the document now? To link to external objects, the document must be saved at least once. Save the document now? Std_Group Group 그룹 TreeParams Tree view item background. Only effective in overlay. 트리 보기 항목 배경입니다. 오버레이에서만 유효합니다. Tree view item background padding. 트리 보기 항목 배경 패딩입니다. Hide extra tree view column for item description. 항목 설명에 대한 추가 트리 뷰 열을 숨깁니다. Hide extra tree view column - Internal Names. Hide extra tree view column - Internal Names. Hide tree view scroll bar in dock overlay. 독 오버레이에서 트리 보기 스크롤 막대를 숨깁니다. Hide tree view header view in dock overlay. 독 오버레이에서 트리 보기 헤더 보기를 숨깁니다. Allow tree view columns to be manually resized. Allow tree view columns to be manually resized. Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled Displays an eye icon in front of the tree view items, showing the items visibility status. When clicked the visibility is toggled Workbench &File 파일(&F) &Edit 편집(&E) Edit 편집 Clipboard 오림판 Workbench 작업대 Structure 구조 Standard &Views Standard &Views Individual Views Individual Views &Online Help &Online Help Link Actions Link Actions &Stereo 스테레오(&S) &Zoom 확대/축소(&Z) A&xonometric A&xonometric V&isibility V&isibility &View 보기(&V) &Tools 도구(&T) &Macro 매크로(&M) &Windows 창(&W) &Help 도움말(&H) Help 도움말 File 파일 Macro 매크로 View 보기 Special Ops 특수 설정 Gui::MDIView Export PDF PDF 내보내기 PDF file PDF 파일 Gui::Dialog::DlgSettingsNotificationArea Notification Area 알림 영역 <html><head/><body>If checked, show the notification area in the status bar: a button with the current notification count, which can expand the detailed notification list. Optionally, with additional pop-up notifications.</body></html> <html><head/><body>If checked, show the notification area in the status bar: a button with the current notification count, which can expand the detailed notification list. Optionally, with additional pop-up notifications.</body></html> <html><head/><body>Maximum amount of time the notification will be shown (unless mouse buttons are clicked). It also controls when user notifications will be removed if the "Auto-remove user notifications" setting is checked.</body></html> <html><head/><body>Maximum amount of time the notification will be shown (unless mouse buttons are clicked). It also controls when user notifications will be removed if the "Auto-remove user notifications" setting is checked.</body></html> s s <html><head/><body>Minimum amount of time the notification will be shown (unless the notification bubble is dismissed by clicking on it).</body></html> <html><head/><body>Minimum amount of time the notification will be shown (unless the notification bubble is dismissed by clicking on it).</body></html> Maximum number of notifications that will be simultaneously present on the notification bubble. Maximum number of notifications that will be simultaneously present on the notification bubble. Enable Notification Area Enable Notification Area Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. Enables non-intrusive pop-up notifications above the status bar notification area. Pop-up notifications can be manually dismissed by clicking on them, and also automatically dismissed by specifying a maximum and minimum duration for them to be displayed. Additionally, pop-up notifications can be disabled. In this case the user can still use the notification area as a quick-access location to view notifications, without the distracton of an additional pop-up. Enable Pop-Up Notifications Enable Pop-Up Notifications Minimum duration Minimum duration Maximum duration Maximum duration Maximum concurrent notification count Maximum concurrent notification count Notification bubble width Notification bubble width Width of the pop-up notification bubble in pixels. Width of the pop-up notification bubble in pixels. px px Any open pop-up notifications will disappear when another window is activated. Any open pop-up notifications will disappear when another window is activated. Prevent pop-up notifications from appearing when the FreeCAD window is not the active window. Prevent pop-up notifications from appearing when the FreeCAD window is not the active window. Do not show when window is inactive Do not show when window is inactive Additional notification sources to show in the notification area. Additional notification sources to show in the notification area. Additional Data Sources Additional Data Sources Errors intended for developers will appear in the notification area. Errors intended for developers will appear in the notification area. Warnings intended for developers will appear in the notification area. Warnings intended for developers will appear in the notification area. Controls the amount of notifications to show in the list. Controls the amount of notifications to show in the list. Notifications List Notifications List Maximum notification count Maximum notification count Limits the number of notifications that will be kept in the list. If 0, there is no limit. Limits the number of notifications that will be kept in the list. If 0, there is no limit. Removes the user notifications from the notifications list after the maximum duration for pop-up notifications has lapsed. Removes the user notifications from the notifications list after the maximum duration for pop-up notifications has lapsed. Auto-remove user notifications Auto-remove user notifications Debug errors Debug errors Debug warnings Debug warnings Hide when other window is activated Hide when other window is activated Gui::Dialog::DlgSettingsWorkbenches Available Workbenches 사용 가능한 작업대 Workbenches 작업대 <html><head/><body>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select Sort alphabetically. Additional workbenches can be installed through the addon manager. Currently installed workbenches:</body></html> <html><head/><body>You can reorder workbenches by drag and drop or sort them by right-clicking on any workbench and select Sort alphabetically. Additional workbenches can be installed through the addon manager. Currently installed workbenches:</body></html> Selectors Selectors Workbench selector items style Workbench selector items style Customizes how the items are displayed Customizes how the items are displayed Workbench selector type Workbench selector type Choose the workbench selector widget type (restart required) Choose the workbench selector widget type (restart required) Startup Startup Default workbench Default workbench Changes which workbench will be activated and shown after FreeCAD launches Changes which workbench will be activated and shown after FreeCAD launches Remembers which workbench is active for each tab of the viewport Remembers which workbench is active for each tab of the viewport Remember active workbench by tab 탭별로 활성 작업대 기억하기 Gui::TaskOrientation Choose Orientation Choose Orientation Planes Planes XY-plane XY-평면 XZ-plane XZ-평면 YZ-plane YZ-평면 Offset 편차 Reverse direction 역방향 Gui::TaskImage Planes Planes Reverse direction 역방향 Keep aspect ratio 종횡비 유지 Image Plane Settings Image Plane Settings XY-plane XY-평면 XZ-plane XZ-평면 YZ-plane YZ-평면 Offset 편차 X distance X distance Y distance Y distance Rotation Rotation Transparency 투명도 Image Size Image Size Width 너비 Height 높이 Scales the image interactively by setting a length between two points of the image Scales the image interactively by setting a length between two points of the image Calibrate 조정 Calibration 교정 Apply 적용 Cancel 취소하기 Gui::Dialog::wbListItem Auto-load Auto-load Toggles the visibility of %1 in the available workbenches Toggles the visibility of %1 in the available workbenches This is the current startup module, and must be enabled This is the current startup module, and must be enabled Shortcut to activate this workbench Shortcut to activate this workbench Loads %1 automatically when FreeCAD starts Loads %1 automatically when FreeCAD starts This is the current startup module, and must be autoloaded. This is the current startup module, and must be autoloaded. Loaded 불러오기 됨 Load 불러오기 To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality. Gui::Dialog::DlgSettingsWorkbenchesImp Sort Alphabetically Sort Alphabetically ComboBox ComboBox TabBar TabBar Icon and text Icon and text Icon 아이콘 Text 텍스트 NotificationsAction Delete 삭제 Delete User Notifications Delete User Notifications Delete All 전체 삭제 Gui::NotificationArea Delete User Notifications Delete User Notifications Delete All 전체 삭제 Gui::ImageView Failed to load image file 화상 파일 불러오기 실패 Cannot load file %1: %2 Cannot load file %1: %2 Fit to Window Fit to Window Zoom In Zoom In Zoom Out Zoom Out StdViewLoadImage &Load Image… &Load Image… Loads an image 화상을 불러옵니다 NaviCubeDraggableCmd Movable Navigation Cube Movable Navigation Cube Drag and place NaviCube Drag and place NaviCube NaviCubeSettings FRONT FRONT TOP TOP RIGHT RIGHT REAR REAR BOTTOM BOTTOM LEFT LEFT Gui::ExpLineEdit An error occurred -- see Report View for information An error occurred -- see Report View for information Gui::Dialog::DlgSettingsEditor Editor 편집기 Options 옵션 Code lines will be numbered 코드 라인에 번호가 매겨집니다 Enable line numbers 줄 번호를 활성화 The cursor shape will be a block 커서가 곧 잠금됩니다. Enable block cursor 커서 잠금 할성화 Enable folding 폴딩 가능 Indentation 들여쓰기 Tab size Tab size Indent size Indent size Display Items Display Items Family Family Size 크기 Color 색상 Preview 미리보기 Tabulator raster (how many spaces) Tabulator 래스터(공백 수) spaces Do not remove leading space spaces How many spaces will be inserted when pressing <Tab> <Tab>이 입력 되었을때 얼만큼의 공간이 삽입 될 것인가 Pressing <Tab> will insert a tabulator with defined tab size <Tab>을 누르면 정의된 탭 크기의 표가 삽입됩니다 Keep tabs 탭 유지 Pressing <Tab> will insert amount of defined indent size <Tab>을 누르면 정의된 들여쓰기 크기가 삽입됩니다. Insert spaces 공백 삽입 Color and font settings will be applied to selected type 선택한 유형에 색상 및 글꼴 설정이 적용됩니다 Font family to be used for selected code type 선택한 코드 유형에 사용할 글꼴 집합 Font size to be used for selected code type 선택한 코드 유형에 사용할 글꼴 크기 Text 텍스트 Bookmark 책갈피 Breakpoint 중단점 Keyword 키워드 Comment 주석 Block comment 블록 주석 Number 숫자 String 문자열 Character 문자 Class name 클래스 이름 Define name 이름 정의 Operator 연산자 Python output Python 출력 Python error Python 오류 Current line highlight 현재 줄 강조 표시 Items 항목 Gui::Dialog::DlgSettingsGeneral General 일반 Language of the application's user interface 응용 프로그램의 사용자 인터페이스 언어 Number of decimals that should be shown for numbers and dimensions 숫자 및 치수에 대해 표시되어야 하는 소수점 자릿수 Unit system for all parts of the application. Can be overridden by specifying a document unit system. Unit system for all parts of the application. Can be overridden by specifying a document unit system. Ignore project unit system and use default Ignore project unit system and use default Minimum fractional inch to be displayed 화면표시할 최소 분수 인치 Substitute decimal separator Substitute decimal separator Application 응용 프로그램 Tree View and Property View mode Tree View and Property View mode How many files should be listed in recent files list 최근 파일 목록에 나열되어야 하는 파일 수 Language and Number Format Language and Number Format Language 언어 Default unit system Default unit system Number of decimals 소수점수 Ignores document unit systems Ignores document unit systems Minimum fractional inch Minimum fractional inch Number format Number format Substitutes numerical keypad decimal separator with locale separator, except in the Python console and the macro editor where a dot/period will always be printed Substitutes numerical keypad decimal separator with locale separator, except in the Python console and the macro editor where a dot/period will always be printed Theme 테마 Customize the appearance of the user interface Customize the appearance of the user interface Looking for more themes? You can obtain them using the <a href="freecad:Std_AddonMgr">Addon Manager</a>. Looking for more themes? You can obtain them using the <a href="freecad:Std_AddonMgr">Addon Manager</a>. Size of toolbar icons Size of toolbar icons Icon size in the toolbar Icon size in the toolbar Customize how the tree view is shown in the panel (restart required). 'Combined': combine tree and property view into one panel. 'Independent': split tree and property view into separate panels. Customize how the tree view is shown in the panel (restart required). 'Combined': combine tree and property view into one panel. 'Independent': split tree and property view into separate panels. Size of recent file list Size of recent file list Background of the main window (when no document is opened) will consist of tiles of an image. Background of the main window (when no document is opened) will consist of tiles of an image. Enable tiled background 타일식 배경 사용 The text cursor will be blinking 텍스트 커서가 깜박입니다 Enable cursor blinking 커서 깜박임 활성화하기 A splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen. A splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen. Enable splash screen at start-up Enable splash screen at start-up Activate overlay handling of docked panels Activate overlay handling of docked panels Activate overlay panels Activate overlay panels Preference Packs Preference Packs Import Configuration Import Configuration Save as New Save as New Manage Manage Revert Revert Name 이름 Type 유형 Load 불러오기 Manage preference packs 환경설정 팩 관리하기 Small (%1px) 작게(%1px) Medium (%1px) 중간(%1px) Large (%1px) 크게(%1px) Extra large (%1px) 아주크게(%1px) Custom (%1px) 커스텀(%1px) Combined Combined Independent Independent Preference Pack Name 환경설정 팩 이름 Tags 태그 Apply 적용 Applies the %1 preference pack Applies the %1 preference pack Choose a FreeCAD config file to import 가져올 FreeCAD 구성 파일 고르기 File exists 파일이 존재합니다 A preference pack with that name already exists. Overwrite? 해당 이름의 환경설정 팩이 이미 있습니다. 덮어쓰시겠습니까? Gui::Dialog::DlgSettingsReportView Report View Report View Output 출력 Normal messages will be recorded 정상적인 메시지가 기록됩니다 Record normal messages 정상적인 메시지 기록하기 Log messages will be recorded 로그 메시지가 기록됩니다 Record log messages 로그 메시지를 기록 Warnings will be recorded 경고가 곧 기록됩니다 Record warnings 경고를 기록 Error messages will be recorded 오류 메시지가 기록됩니다 Record error messages 오류 메시지를 기록 When an error has occurred, the Report View dialog becomes visible on-screen while displaying the error 오류가 발생하면 오류를 표시하는 동안 보고서 보기 대화 상자가 화면에 표시됩니다. Show report view on error 오류 시 보고서 보기 표시하기 When a warning has occurred, the Report View dialog becomes visible on-screen while displaying the warning 경고가 발생하면 경고를 표시하는 동안 보고서 보기 대화 상자가 화면에 표시됩니다. Show report view on warning 경고 시 보고서 보기 표시하기 When a normal message has occurred, the Report View dialog becomes visible on-screen while displaying the message 정상적인 메시지가 발생하면, 메시지를 표시하는 동안 보고서 보기 대화상자가 화면에 표시됩니다 Show report view on normal message 정상 메시지에 보고서 보기 표시하기 When a log message has occurred, the Report View dialog becomes visible on-screen while displaying the log message 로그 메시지가 발생하면 로그 메시지를 표시하는 동안 보고서 보기 대화 상자가 화면에 표시됩니다. Show report view on log message 로그 메시지에 보고서 보기 표시하기 Include a timecode for each report 각 보고서에 대한 시간 코드 포함하기 Include a timecode for each entry 각 항목에 대한 시간 코드 포함하기 Colors 색상 Normal messages 정상 메시지 Log messages 로그 메시지 Warnings 경고 Errors 오류 Python Interpreter Python Interpreter Font color for normal messages in Report view panel 보고서 보기 패널의 정상적인 메시지 글꼴 색상 Font color for log messages in Report view panel 보고서 보기 패널의 로그 메시지 글꼴 색상 Font color for warning messages in Report view panel 보고서 보기 패널의 경고 메시지 글꼴 색상 Font color for error messages in Report view panel 보고서 보기 패널의 오류 메시지 글꼴 색상 Internal Python output will be redirected from Python console to Report view panel 내부 Python 출력이 Python 콘솔에서 보고서 보기 패널로 다시 보내집니다 Redirect internal Python output to report view 내부 Python 출력을 보고서 보기로 다시 보내기 Internal Python error messages will be redirected from Python console to Report view panel 내부 Python 오류 메시지는 Python 콘솔에서 보고서 보기 패널로 다시 보내집니다 Redirect internal Python errors to report view 내부 Python 오류를 보고서 보기로 다시 보내기 Gui::Dialog::DlgSettingsLightSources Light Sources Light Sources Preview 미리보기 Pushes in Pushes in Pulls out Pulls out Main light Main light Backlight Backlight Vertical angle Vertical angle Horizontal angle Horizontal angle Fill light Fill light Ambient light Ambient light Color 색상 % % Intensity 강도 OverlayParams Overlay splitter handle auto hide delay. Set zero to disable auto hiding. Overlay splitter handle auto hide delay. Set zero to disable auto hiding. Show auto hidden dock overlay on mouse over. If disabled, then show on mouse click. Show auto hidden dock overlay on mouse over. If disabled, then show on mouse click. Auto mouse click through transparent part of dock overlay. Auto mouse click through transparent part of dock overlay. Overlay layout delay Overlay layout delay Automatically passes mouse wheel events through the transparent areas of an overlay panel Automatically passes mouse wheel events through the transparent areas of an overlay panel Delay capturing mouse wheel event for passing through if it is previously handled by other widget. Delay capturing mouse wheel event for passing through if it is previously handled by other widget. If auto mouse click through is enabled, then this radius defines a region of alpha test under the mouse cursor. Auto click through is only activated if all pixels within the region are non-opaque. If auto mouse click through is enabled, then this radius defines a region of alpha test under the mouse cursor. Auto click through is only activated if all pixels within the region are non-opaque. Leave space for Navigation Cube in dock overlay Leave space for Navigation Cube in dock overlay Auto hide hint visual display triggering width Auto hide hint visual display triggering width Auto hide hint visual display width Auto hide hint visual display width Auto hide hint visual display length for left panel. Set to zero to fill the space. Auto hide hint visual display length for left panel. Set to zero to fill the space. Auto hide hint visual display length for right panel. Set to zero to fill the space. Auto hide hint visual display length for right panel. Set to zero to fill the space. Auto hide hint visual display length for top panel. Set to zero to fill the space. Auto hide hint visual display length for top panel. Set to zero to fill the space. Auto hide hint visual display length for bottom panel. Set to zero to fill the space. Auto hide hint visual display length for bottom panel. Set to zero to fill the space. Auto hide hint visual display offset for left panel Auto hide hint visual display offset for left panel Auto hide hint visual display offset for right panel Auto hide hint visual display offset for right panel Auto hide hint visual display offset for top panel Auto hide hint visual display offset for top panel Auto hide hint visual display offset for bottom panel Auto hide hint visual display offset for bottom panel Show tab bar on mouse over when auto hide Show tab bar on mouse over when auto hide Hide tab bar in dock overlay Hide tab bar in dock overlay Delay before show hint visual Delay before show hint visual Auto hide animation duration, 0 to disable Auto hide animation duration, 0 to disable Auto hide animation curve type Auto hide animation curve type Hide property view scroll bar in dock overlay Hide property view scroll bar in dock overlay Minimum overlay dock widget width/height Minimum overlay dock widget width/height Gui::OverlayTabWidget Toggle transparent mode Toggle transparent mode None 없음 Turn off auto hide/show Turn off auto hide/show Auto hide 자동 숨김 Auto hide docked widgets on leave Auto hide docked widgets on leave Hide on edit Hide on edit Auto hide docked widgets on editing Auto hide docked widgets on editing Show on edit Show on edit Auto show docked widgets on editing Auto show docked widgets on editing Auto task Auto task Auto show task view for any current task, and hide the view when there is no task. Auto show task view for any current task, and hide the view when there is no task. Toggle overlay 오버레이 전환 Select auto show/hide mode Select auto show/hide mode StdCmdProperties Propert&ies Propert&ies Shows the property view, which displays the properties of the selected object. Shows the property view, which displays the properties of the selected object. StdCmdToggleFreeze Toggle Freeze Toggle Freeze Toggles freeze state of the selected objects. A frozen object is not recomputed when its parents change. Toggles freeze state of the selected objects. A frozen object is not recomputed when its parents change. Gui::WorkbenchTabWidget Preferences 환경설정 StdCmdReloadStyleSheet &Reload Stylesheet &Reload Stylesheet Reloads the current stylesheet Reloads the current stylesheet Gui::Dialog::DlgSettingsUI UI UI Accent color 1 강조색 1 This color might be used by your theme to let you customize it. This color might be used by your theme to let you customize it. Accent color 2 강조색 2 Accent color 3 강조색 3 Style sheet how user interface will look like Style sheet how user interface will look like Icon size override, set to 0 for the default value. Icon size override, set to 0 for the default value. Additional row spacing Additional row spacing Allow tree view columns to be manually resized. Allow tree view columns to be manually resized. Resizable columns Resizable columns Icon size Icon size Additional spacing for tree view rows. Bigger values will increase row item heights. Additional spacing for tree view rows. Bigger values will increase row item heights. Theme Customization Theme Customization Customize the current theme. The offered settings are optional for theme developers so they may or may not have an effect in the current theme. Customize the current theme. The offered settings are optional for theme developers so they may or may not have an effect in the current theme. Style sheet (advanced) Style sheet (advanced) Overlay style sheet Overlay style sheet Open Theme Editor Open Theme Editor Tree View Tree View Hide extra tree view column for internal names Hide extra tree view column for internal names Hide internal names Hide internal names Displays an eye icon in front of the tree view items, showing their visibility status. When clicked the visibility is toggled. Displays an eye icon in front of the tree view items, showing their visibility status. When clicked the visibility is toggled. Show visibility icon Show visibility icon Hide header with column names from the tree view. Hide header with column names from the tree view. Hide header Hide header Hide scroll bar from the tree view, scrolling will still be possible using mouse wheel. Hide scroll bar from the tree view, scrolling will still be possible using mouse wheel. Hide scroll bar Hide scroll bar Hide column with object description in tree view. Hide column with object description in tree view. Hide description Hide description Overlay Overlay Hide tab bar in dock overlay Hide tab bar in dock overlay Hide tab bar Hide tab bar Show tab bar on mouse over when auto hide Show tab bar on mouse over when auto hide Hint show tab bar Hint show tab bar Hide property view scroll bar in dock overlay Hide property view scroll bar in dock overlay Hide property view scroll bar Hide property view scroll bar Automatically hide overlaid dock panels when in non 3D view (e.g. TechDraw or Spreadsheet) Automatically hide overlaid dock panels when in non 3D view (e.g. TechDraw or Spreadsheet) Automatically hide in non-3D view Automatically hide in non-3D view Automatically pass through of the mouse cursor Automatically pass through of the mouse cursor Automatically passes mouse wheel events through the transparent areas of an overlay panel Automatically passes mouse wheel events through the transparent areas of an overlay panel Automatically pass through of the mouse wheel Automatically pass through of the mouse wheel Suggested Actions Suggested Actions Suggest actions in the task view based on the selection Suggest actions in the task view based on the selection Auto mouse click through transparent part of dock overlay. Auto mouse click through transparent part of dock overlay. Gui::ModuleIO File not found 파일을 찾을 수 없습니다 The file '%1' cannot be opened. '%1' 파일을 열 수 없습니다. Gui::VectorTableModel Unsupported format. Must be 3 values per row separated by tabs, semicolons, or commas: Unsupported format. Must be 3 values per row separated by tabs, semicolons, or commas: Gui::StdCmdPythonHelp Python &Modules Documentation Python &Modules Documentation Opens the Python Modules documentation Opens the Python Modules documentation StdCmdRestartInSafeMode Restart in Safe Mode Restart in Safe Mode Starts FreeCAD without any modules or plugins loaded Starts FreeCAD without any modules or plugins loaded StdCmdOnlineHelp &Help 도움말(&H) Opens the Help documentation Opens the Help documentation StdCmdFreeCADWebsite FreeCAD W&ebsite FreeCAD W&ebsite Navigates to the official FreeCAD website Navigates to the official FreeCAD website StdCmdFreeCADUserHub &User Documentation &User Documentation Opens the documentation for users Opens the documentation for users StdCmdReportBug Report an &Issue Report an &Issue Opens the bugtracker to report an issue Opens the bugtracker to report an issue StdCmdTransformManip Trans&form Trans&form Transforms the selected object in the 3D view Transforms the selected object in the 3D view Gui::TaskTransformDialog Placement 위치 설정 Coordinate system Coordinate system Local coordinate system Local coordinate system Global coordinate system Global coordinate system Align dragger rotation with selected coordinate system Align dragger rotation with selected coordinate system Translation Translation X X Y Y Z Z Utilities Utilities Move to Other Object 다른 대상체로 이동 Translate 번역하기 Rotate 회전하기 Match U/X Match U/X Match V/Y Match V/Y Match W/Z Match W/Z Align U/X Align U/X Align V/Y Align V/Y Align W/Z Align W/Z Pick Reference Pick Reference Flip 뒤집기 Dragger Dragger Snapping Snapping Reference 참조 Mode Mode Rotation Rotation Gui::Dialog::DlgSettingsPDF PDF PDF PDF Export PDF Export PDF version PDF version This is the PDF Version FreeCAD will use to export to PDF This is the PDF Version FreeCAD will use to export to PDF PDF/1.4 PDF/1.4 PDF/A-1b PDF/A-1b PDF/1.6 PDF/1.6 PDF/X-4 PDF/X-4 This archival PDF format does not support transparency or layers. All content must be self-contained and static. This archival PDF format does not support transparency or layers. All content must be self-contained and static. While this version supports more modern features, older PDF readers may not fully handle it. While this version supports more modern features, older PDF readers may not fully handle it. This PDF format is intended for professional printing and requires all fonts to be embedded; some interactive features may not be supported. This PDF format is intended for professional printing and requires all fonts to be embedded; some interactive features may not be supported. This PDF version has limited support for modern features like embedded multimedia and advanced transparency effects. This PDF version has limited support for modern features like embedded multimedia and advanced transparency effects. Gui::TaskTransform Transform 변환하기 Object origin 대상체 원점 Center of mass / centroid Center of mass / centroid Custom 사용자 정의 Local Local Global 전역 Pick Reference Pick Reference Move to Other Object 다른 대상체로 이동 Select face, edge, or vertex… Select face, edge, or vertex… Cancel 취소하기 Gui::InputHintWidget Backtab Keyboard key for Backtab Backtab Enter Keyboard key for numpad Enter Enter Insert Keyboard key for Insert 삽입 Esc Keyboard key for Escape Esc Tab ⭾ Keyboard key for Tab Tab ⭾ Del Keyboard key for Delete 삭제 Pause Keyboard key for Pause Pause Print Keyboard key for Print Print SysReq Keyboard key for SysReq SysReq Clear Keyboard key for Clear 지우기 Home Keyboard key for Home 홈 End Keyboard key for End End PgDown Keyboard key for Page Down PgDown PgUp Keyboard key for Page Up PgUp ⇧ Shift Keyboard key for Shift on Windows & Linux ⇧ Shift Num0 Keyboard key for numpad 0 Num0 Num1 Keyboard key for numpad 1 Num1 Num2 Keyboard key for numpad 2 Num2 Num3 Keyboard key for numpad 3 Num3 Num4 Keyboard key for numpad 4 Num4 Num5 Keyboard key for numpad 5 Num5 Num6 Keyboard key for numpad 6 Num6 Num7 Keyboard key for numpad 7 Num7 Num8 Keyboard key for numpad 8 Num8 Num9 Keyboard key for numpad 9 Num9 Ctrl Keyboard key for Control on Windows & Linux Ctrl Alt Keyboard key for Alt on Windows & Linux Alt Caps Lock Keyboard key for Caps Lock Caps Lock Num Lock Keyboard key for Num Lock Num Lock Scroll Lock Keyboard key for Scroll Lock Scroll Lock Gui::SolidWorksNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press Ctrl and middle mouse button Press Ctrl and middle mouse button Press middle mouse button 가운데 마우스 버튼 누르기 Scroll mouse wheel Scroll mouse wheel Angle A A B B C C Angle snap Angle snap Gui::DlgThemeEditor Theme Editor Theme Editor Preview 미리보기 CheckBox 확인란 RadioButton RadioButton Item 1 Item 1 Item 2 Item 2 PushButton PushButton Tab 1 Tab 1 Tab 2 Tab 2 TaskSolverMessages DOF DOF Link 연결 Forces the recomputation of the active document Forces the recomputation of the active document Settings 설정 Gui::Application Built-in Parameters Built-in Parameters Theme Parameters Theme Parameters Theme Parameters - Fallback Theme Parameters - Fallback User Parameters User Parameters Gui::AutoSaver Wait until the auto-recovery file has been saved… Wait until the auto-recovery file has been saved… StdCmdDependencyGraph Dependency Gra&ph Dependency Gra&ph Shows the dependency graph of the objects in the active document Shows the dependency graph of the objects in the active document Std_DependencyGraph Dependency Graph Dependency Graph StdCmdExportDependencyGraph Export Dependency &Graph Export Dependency &Graph Exports the dependency graph as a Graphviz (.gv) file Exports the dependency graph as a Graphviz (.gv) file StdCmdSaveAs Save &As… Save &As… Saves the active document under a new file name Saves the active document under a new file name StdCmdSaveCopy Save Cop&y Save Cop&y Saves a copy of the active document under a new file name Saves a copy of the active document under a new file name Std_Revert Revert Document Revert Document This will discard all the changes since the last file save. This will discard all the changes since the last file save. Continue? Continue? StdCmdProjectInfo Doc&ument Information Doc&ument Information Shows information about the active document Shows information about the active document StdCmdProjectUtil Do&cument Utility Do&cument Utility Extracts or creates document files Extracts or creates document files StdCmdPrint &Print &Print Prints the active document Prints the active document StdCmdPrintPreview Print Previe&w Print Previe&w Previews the active document before printing Previews the active document before printing StdCmdPrintPdf Export P&DF Export P&DF Exports the active document as a PDF file Exports the active document as a PDF file StdCmdDuplicateSelection Duplicate Selecti&on Duplicate Selecti&on Duplicates the selected objects to the active document Duplicates the selected objects to the active document StdCmdRefresh Recompute 재계산 Recomputes the active document Recomputes the active document Std_Refresh The document contains dependency cycles. Check the report view for more details. Proceed? The document contains dependency cycles. Check the report view for more details. Proceed? StdCmdTransform Transform 변환하기 Transforms the selected object Transforms the selected object StdCmdPlacement P&lacement P&lacement Opens the placement editor to adjust the placement of the selected object Opens the placement editor to adjust the placement of the selected object StdCmdAlignment Ali&gn To… Ali&gn To… Aligns the selected objects Aligns the selected objects StdCmdRandomColor Random &Color Random &Color Assigns random diffuse colors for the selected objects Assigns random diffuse colors for the selected objects StdCmdToggleSkipRecompute Skip Recomputes Skip Recomputes Enables or disables the recomputations of the document Enables or disables the recomputations of the document StdCmdLinkMakeGroup Link Group Link Group Creates a group of links Creates a group of links StdCmdLinkMake Make Link Make Link A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. A link is an object that references another object, either within the same or in another document. Unlike clones, links reference the original shape directly, making them more memory-efficient, which helps with the creation of complex assemblies. StdCmdLinkMakeRelative Make Sub-Link Make Sub-Link Creates a sub-object or sub-element link Creates a sub-object or sub-element link StdCmdLinkReplace Replace With Link Replace With Link Replaces the selected objects with links Replaces the selected objects with links StdCmdLinkImport Import Links Import Links Imports selected external links Imports selected external links StdCmdLinkImportAll Import All Links Import All Links Imports all links of the active document Imports all links of the active document StdCmdLinkSelectLinked &Go to Linked Object &Go to Linked Object Selects the linked object and switches to its original document Selects the linked object and switches to its original document StdCmdLinkSelectLinkedFinal Go to &Deepest Linked Object Go to &Deepest Linked Object Selects the deepest linked object and switches to its original document Selects the deepest linked object and switches to its original document StdCmdLinkSelectAllLinks Select &All Links Select &All Links Selects all links to the current selected object Selects all links to the current selected object StdCmdLinkActions Link Actions Link Actions Commands that operate on link objects Commands that operate on link objects StdCmdDlgMacroExecute Ma&cros Ma&cros Opens a dialog to execute a recorded macro Opens a dialog to execute a recorded macro StdCmdDlgMacroExecuteDirect &Execute Macro &Execute Macro Executes the macro in the editor Executes the macro in the editor StdCmdMacroAttachDebugger &Attach to Remote Debugger &Attach to Remote Debugger Attaches to a remotely running debugger Attaches to a remotely running debugger StdCmdMacroStartDebug &Debug Macro &Debug Macro Starts the debugging of macros Starts the debugging of macros StdCmdMacroStopDebug &Stop Debugging &Stop Debugging Stops the debugging of macros Stops the debugging of macros StdCmdMacroStepOver Step &Over Step &Over Steps to the next line in this file Steps to the next line in this file StdCmdMacroStepInto Step &Into Step &Into Steps to the next line executed Steps to the next line executed StdCmdToggleBreakpoint Toggle &Breakpoint Toggle &Breakpoint Adds or removes a breakpoint at this position Adds or removes a breakpoint at this position StdCmdMacrosFolder Open Macro Folder Open Macro Folder Opens the macros folder in the system file manager Opens the macros folder in the system file manager StdCmdRecentMacros &Recent Macros &Recent Macros Displays the list of recently used macros Displays the list of recently used macros StdCmdDlgParameter E&dit Parameters E&dit Parameters Opens a dialog to edit the parameters Opens a dialog to edit the parameters StdCmdDlgPreferences Prefere&nces Prefere&nces Opens a dialog to edit the preferences Opens a dialog to edit the preferences StdCmdDlgCustomize Cu&stomize… Cu&stomize… Opens a dialog to edit toolbars, shortcuts, and macros Opens a dialog to edit toolbars, shortcuts, and macros StdCmdCommandLine Command &Line Command &Line Opens a command line interface in the console Opens a command line interface in the console StdCmdFreeCADDonation Donate to FreeCA&D Donate to FreeCA&D Support the FreeCAD development Support the FreeCAD development StdCmdDevHandbook Developers Handbook Developers Handbook Handbook about FreeCAD development Handbook about FreeCAD development StdCmdTextDocument Te&xt Document Te&xt Document Adds a text document to the active document Adds a text document to the active document StdCmdUnitsCalculator &Units Converter &Units Converter Starts the units converter Starts the units converter StdCmdUserEditMode Edit &Mode Edit &Mode Defines behavior when editing an object from the tree view Defines behavior when editing an object from the tree view StdCmdPart New Part New Part Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. Creates a part, which is a general-purpose container to group objects so they act as a unit in the 3D view. It is intended to arrange objects that have a part TopoShape, like part primitives, Part Design bodies, and other parts. StdCmdGroup New Group 새 그룹 Creates a group, which is a general-purpose container to group objects in the tree view, regardless of their data type. It is a simple folder to organize the objects in a model. Creates a group, which is a general-purpose container to group objects in the tree view, regardless of their data type. It is a simple folder to organize the objects in a model. StdCmdVarSet Variable Set Variable Set Creates a variable set, which is an object that maintains a set of properties to be used as variables Creates a variable set, which is an object that maintains a set of properties to be used as variables StdCmdViewSaveCamera Save Current Camera Save Current Camera Saves the current camera settings Saves the current camera settings StdCmdViewRestoreCamera Restore Saved Camera Restore Saved Camera Restores the saved camera settings Restores the saved camera settings StdCmdToggleClipPlane Clippin&g View Clippin&g View Toggles clipping of the active view Toggles clipping of the active view StdCmdDrawStyle &Draw Style &Draw Style Changes the draw style of the objects Changes the draw style of the objects StdCmdToggleVisibility Toggle &Visibility Toggle &Visibility Toggles the visibility of the selection Toggles the visibility of the selection StdCmdToggleTransparency Toggle Transparenc&y Toggle Transparenc&y Toggles the transparency of the selected objects. Transparency can be fine-tuned in the appearance task dialog Toggles the transparency of the selected objects. Transparency can be fine-tuned in the appearance task dialog StdCmdToggleSelectability Toggle Se&lectability Toggle Se&lectability Toggles the property of the objects to get selected in the 3D view Toggles the property of the objects to get selected in the 3D view StdCmdShowSelection Sho&w Selection Sho&w Selection Shows all selected objects 선택된 모든 대상체 보이기 StdCmdHideSelection &Hide Selection &Hide Selection Hides all selected objects 선택된 모든 대상체 숨기기 StdCmdSelectVisibleObjects &Select Visible Objects &Select Visible Objects Selects all visible objects in the active document Selects all visible objects in the active document StdCmdToggleObjects To&ggle All Objects To&ggle All Objects Toggles the visibility of all objects in the active document Toggles the visibility of all objects in the active document StdCmdShowObjects Show &All Objects Show &All Objects Shows all objects in the document Shows all objects in the document StdCmdHideObjects Hide All &Objects Hide All &Objects Hides all objects in the document Hides all objects in the document StdCmdViewRotateRight Rotates &Right Rotates &Right Rotates the view by 90° clockwise Rotates the view by 90° clockwise StdCmdViewFitAll &Fit All &Fit All Fits all content into the 3D view Fits all content into the 3D view StdCmdViewFitSelection Fit &Selection Fit &Selection Fits the selected content into the 3D view Fits the selected content into the 3D view StdCmdViewGroup Standard &Views Standard &Views Changes to a standard view Changes to a standard view StdViewDockUndockFullscreen D&ocument Window D&ocument Window Displays the active view either in fullscreen, undocked, or docked mode Displays the active view either in fullscreen, undocked, or docked mode StdCmdViewVR FreeCAD VR FreeCAD VR Extends the FreeCAD 3D Window to a VR device Extends the FreeCAD 3D Window to a VR device StdCmdViewCreate New 3D View New 3D View Opens a new 3D view window for the active document Opens a new 3D view window for the active document StdCmdToggleNavigation Toggle Navigation/&Edit Mode Toggle Navigation/&Edit Mode Toggles between navigation and edit mode Toggles between navigation and edit mode StdCmdAxisCross Toggle A&xis Cross Toggle A&xis Cross Toggles the axis cross at the origin Toggles the axis cross at the origin StdCmdViewExample3 Inventor Example #3 Inventor Example #3 Shows an animated texture Shows an animated texture StdCmdViewIvStereoRedGreen Stereo Re&d/Cyan Stereo Re&d/Cyan Switches stereo viewing to red/cyan Switches stereo viewing to red/cyan StdCmdViewIvStereoQuadBuff Stereo &Quad Buffer Stereo &Quad Buffer Switches stereo viewing to quad buffer Switches stereo viewing to quad buffer StdCmdViewIvIssueCamPos Issue Camera &Position Issue Camera &Position Issues the camera position to the console and to a macro, to easily recall this position Issues the camera position to the console and to a macro, to easily recall this position StdViewBoxZoom &Box Zoom &Box Zoom Activates the box zoom tool Activates the box zoom tool StdBoxSelection &Box Selection &Box Selection Activates the box selection tool Activates the box selection tool StdBoxElementSelection Bo&x Element Selection Bo&x Element Selection Activates box element selection Activates box element selection StdTreeSelection &Go to Selection &Go to Selection Scrolls to the first selected item Scrolls to the first selected item StdCmdTreeCollapse Collapse Selected Items Collapse Selected Items Collapses the currently selected tree items Collapses the currently selected tree items StdCmdTreeExpand Expand Selected Items Expand Selected Items Expands the currently selected tree items Expands the currently selected tree items StdCmdTreeSelectAllInstances Select All Instances Select All Instances Selects all instances of the currently selected object Selects all instances of the currently selected object StdCmdSceneInspector Scene I&nspector Scene I&nspector Opens the scene inspector Opens the scene inspector StdCmdTextureMapping Text&ure Mapping Text&ure Mapping Maps textures to shapes Maps textures to shapes StdCmdDemoMode View &Turntable View &Turntable Opens a turntable view Opens a turntable view StdCmdSelBack Selection &Back Selection &Back Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. Restores the previous tree view selection. Only works if tree RecordSelection mode is switched on. StdCmdSelForward Selection &Forward Selection &Forward Restores the next tree view selection. Only works if tree RecordSelection mode is switched on. Restores the next tree view selection. Only works if tree RecordSelection mode is switched on. StdTreeSingleDocument &Single Document &Single Document Displays only the active document in the tree view Displays only the active document in the tree view StdTreeMultiDocument &Multi Document &Multi Document Displays all documents in the tree view Displays all documents in the tree view StdTreeSyncView &1 Sync View &1 Sync View Switches to the 3D view containing the selected item from the tree view Switches to the 3D view containing the selected item from the tree view StdTreeSyncSelection &2 Sync Selection &2 Sync Selection Expands the tree item when the corresponding object is selected in the 3D view Expands the tree item when the corresponding object is selected in the 3D view StdTreeSyncPlacement &3 Sync Placement &3 Sync Placement Adjusts the placement on drag-and-drop of objects across coordinate systems (e.g. in part containers) Adjusts the placement on drag-and-drop of objects across coordinate systems (e.g. in part containers) StdTreeRecordSelection &5 Record Selection &5 Record Selection Records the selection in the tree view in order to go back/forward using the navigation buttons Records the selection in the tree view in order to go back/forward using the navigation buttons StdTreeDrag Initiate &Dragging Initiate &Dragging Initiates dragging of the currently selected tree items Initiates dragging of the currently selected tree items StdCmdTreeViewActions Tree View Actions Tree View Actions Tree view behavior options and actions Tree view behavior options and actions StdCmdSelBoundingBox &Bounding Box &Bounding Box Shows selection bounding box Shows selection bounding box StdCmdDockOverlayAll Toggle Overl&ay for All Panels Toggle Overl&ay for All Panels Toggled overlay mode for all docked panels Toggled overlay mode for all docked panels StdCmdDockOverlayTransparentAll Toggle Tra&nsparent Panels Toggle Tra&nsparent Panels Toggles transparent mode for all docked overlay panels. This makes the docked panels stay transparent at all times. Toggles transparent mode for all docked overlay panels. This makes the docked panels stay transparent at all times. StdCmdDockOverlayToggle Toggle &Overlay Toggle &Overlay Toggles overlay mode for the docked window under the cursor Toggles overlay mode for the docked window under the cursor StdCmdDockOverlayToggleTransparent Toggle Tran&sparent Mode Toggle Tran&sparent Mode Toggles transparent mode for the docked panel under cursor. This makes the docked panel stay transparent at all times. Toggles transparent mode for the docked panel under cursor. This makes the docked panel stay transparent at all times. StdCmdDockOverlayToggleLeft Toggle &Left Toggle &Left Toggles the visibility of the left overlay panel Toggles the visibility of the left overlay panel StdCmdDockOverlayToggleRight Toggle &Right Toggle &Right Toggles the visibility of the right overlay panel Toggles the visibility of the right overlay panel StdCmdDockOverlayToggleTop Toggle &Top Toggle &Top Toggles the visibility of the top overlay panel Toggles the visibility of the top overlay panel StdCmdDockOverlayToggleBottom Toggle &Bottom Toggle &Bottom Toggles the visibility of the bottom overlay panel Toggles the visibility of the bottom overlay panel StdCmdDockOverlayMouseTransparent Bypass &Mouse Events in Overlay Panels Bypass &Mouse Events in Overlay Panels Bypasses all mouse events in docked overlay panels Bypasses all mouse events in docked overlay panels StdCmdDockOverlay Overlay Docked Panel Overlay Docked Panel Sets the docked panel in overlay mode Sets the docked panel in overlay mode StdStoreWorkingView St&ore Working View St&ore Working View Stores a temporary working view for the current document Stores a temporary working view for the current document StdRecallWorkingView R&ecall Working View R&ecall Working View Recalls a previously stored temporary working view Recalls a previously stored temporary working view StdCmdAlignToSelection &Align to Selection &Align to Selection Aligns the camera view to the selected elements in the 3D view Aligns the camera view to the selected elements in the 3D view StdCmdWindows Choose Open &Window Choose Open &Window Displays the open windows Displays the open windows StdCmdUserInterface Dock Views Dock Views Docks all top-level views Docks all top-level views StdCmdToggleToolBarLock Lock Toolbars Lock Toolbars Locks toolbars so they are no longer moveable Locks toolbars so they are no longer moveable Gui::ExpressionLineEdit Exact Match Exact Match Gui::ExpressionTextEdit Exact Match Exact Match Gui::FileChooser Select a File Select a File Select a Directory Select a Directory Gui::NetworkRetriever Download started… Download started… Gui::OverlayTitleBar Mouse pass through, Esc to stop Mouse pass through, Esc to stop Gui::DockWnd::PropertyDockView Property View Property View Gui::TreeDockWidget Tree View Tree View Gui::Dialog::DlgExpressionInput Revert to last calculated value (as constant) 마지막으로 계산 된 값으로 되돌리기 (Warning: unit discarded) (Warning: unit discarded) Invalid property name: %1 Invalid property name: %1 Unknown object Unknown object the name cannot be empty the name cannot be empty %1 is a unit %1 is a unit %1 is a constant %1 is a constant %1 already exists %1 already exists Invalid group name: %1 Invalid group name: %1 QWidget Generic Generic Numeric Numeric Color 색상 Gui New parameter... New parameter... Gui::StyleParametersModel All Theme Editor Parameters All Theme Editor Parameters Root Root Name 이름 Expression 표현식 Preview 미리보기 Type 유형 Gui::Dialog::DlgCustomToolBoxbarsImp Toolbox Bars Toolbox Bars Gui::SiemensNXNavigationStyle Press left mouse button 마우스 왼쪽 버튼 누르기 Press middle+right click Press middle+right click Press middle mouse button 가운데 마우스 버튼 누르기 Scroll mouse wheel Scroll mouse wheel Gui::PropertyEditor::LinkLabel Changes the linked object Changes the linked object Gui::PropertyEditor::PropertyItemDelegate Yes 네 No No Exceptions Value out of range (%1 out of [%2, %3]) Value out of range (%1 out of [%2, %3]) Not a number Not a number Unit mismatch between result and required unit Unit mismatch between result and required unit StdCmdClarifySelection Clarify Selection Clarify Selection Displays a context menu at the mouse cursor to select overlapping or obstructed geometry in the 3D view. Displays a context menu at the mouse cursor to select overlapping or obstructed geometry in the 3D view. Gui::SelectionMenu Whole Object Whole Object