# SPDX-License-Identifier: LGPL-2.1-or-later
# ***************************************************************************
# * *
# * Copyright (c) 2024 bgbsww@gmail.com *
# * *
# * This file is part of FreeCAD. *
# * *
# * FreeCAD is free software: you can redistribute it and/or modify it *
# * under the terms of the GNU Lesser General Public License as *
# * published by the Free Software Foundation, either version 2.1 of the *
# * License, or (at your option) any later version. *
# * *
# * FreeCAD is distributed in the hope that it will be useful, but *
# * WITHOUT ANY WARRANTY; without even the implied warranty of *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
# * Lesser General Public License for more details. *
# * *
# * You should have received a copy of the GNU Lesser General Public *
# * License along with FreeCAD. If not, see *
# * . *
# * *
# ***************************************************************************
""" Tests related to the Topological Naming Problem """
import math
import unittest
import FreeCAD as App
import Part
import Sketcher
import TestSketcherApp
class TestTopologicalNamingProblem(unittest.TestCase):
""" Tests related to the Topological Naming Problem """
# pylint: disable=attribute-defined-outside-init
def setUp(self):
""" Create a document for the test suite """
self.Doc = App.newDocument("PartDesignTestTNP")
def testPadsOnBaseObject(self):
""" Simple TNP test case
By creating three Pads dependent on each other in succession, and then moving the
middle one we can determine if the last one breaks because of a broken reference
to the middle one. This is the essence of a TNP. Pretty much a duplicate of the
steps at https://wiki.freecad.org/Topological_naming_problem """
# Arrange
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
# Make first offset cube Pad
self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
self.Body.addObject(self.PadSketch)
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 0), (1, 1))
self.Doc.recompute()
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
self.Body.addObject(self.Pad)
self.Pad.Profile = self.PadSketch
self.Pad.Length = 1
self.Doc.recompute()
# Attach a second pad to the top of the first.
self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
self.Body.addObject(self.PadSketch1)
self.PadSketch1.MapMode = 'FlatFace'
self.PadSketch1.AttachmentSupport = [(self.Doc.getObject('Pad'), 'Face6')]
TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
self.Doc.recompute()
self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
self.Body.addObject(self.Pad1)
self.Pad1.Profile = self.PadSketch1
self.Pad1.Length = 1
self.Doc.recompute()
# Attach a third pad to the top of the second.
self.PadSketch2 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad2')
self.Body.addObject(self.PadSketch2)
self.PadSketch2.MapMode = 'FlatFace'
self.PadSketch2.AttachmentSupport = [(self.Doc.getObject('Pad1'), 'Face6')]
TestSketcherApp.CreateRectangleSketch(self.PadSketch2, (0, 0), (1, 1))
self.Doc.recompute()
self.Pad2 = self.Doc.addObject("PartDesign::Pad", "Pad2")
self.Body.addObject(self.Pad2)
self.Pad2.Profile = self.PadSketch2
self.Pad2.Length = 1
self.Doc.recompute()
# Assert everything is valid
self.assertTrue(self.Pad.isValid())
self.assertTrue(self.Pad1.isValid())
self.assertTrue(self.Pad2.isValid())
# Act
# Move the second pad ( the sketch attachment point )
self.PadSketch1.AttachmentOffset = App.Placement(
App.Vector(0.5000000000, 0.0000000000, 0.0000000000),
App.Rotation(0.0000000000, 0.0000000000, 0.0000000000))
self.Doc.recompute()
# Assert everything is still valid.
self.assertTrue(self.Pad.isValid())
self.assertTrue(self.Pad1.isValid())
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
self.assertFalse(self.Pad2.isValid()) # TNP problem is present without ElementMaps
else:
self.assertTrue(self.Pad2.isValid()) # TNP problem is not present with ElementMaps
def testPartDesignElementMapSketch(self):
""" Test that creating a sketch results in a correct element map. """
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
body.addObject(sketch)
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
# Act
self.Doc.recompute()
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
reverseMap = sketch.Shape.ElementReverseMap
reverseFaces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
# Assert
self.assertEqual(sketch.Shape.ElementMapSize,12)
self.assertEqual(len(reverseMap),8)
self.assertEqual(len(reverseFaces),0)
self.assertEqual(len(edges),4)
self.assertEqual(len(vertexes),4)
def testPartDesignElementMapPad(self):
""" Test that padding a sketch results in a correct element map. Note that comprehensive testing
of the geometric functionality of the Pad is in TestPad.py """
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
padSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
pad = self.Doc.addObject("PartDesign::Pad", "Pad")
body.addObject(padSketch)
body.addObject(pad)
TestSketcherApp.CreateRectangleSketch(padSketch, (0, 0), (1, 1))
pad.Profile = padSketch
pad.Length = 1
# Act
self.Doc.recompute()
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
reverseMap = pad.Shape.ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
# Assert
self.assertEqual(pad.Shape.ElementMapSize,30) # 4 duplicated Vertexes in here
self.assertEqual(len(reverseMap),26)
self.assertEqual(len(faces),6)
self.assertEqual(len(edges),12)
self.assertEqual(len(vertexes),8)
def testPartDesignElementMapBox(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(box.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(box.Shape.childShapes()), 1)
self.assertEqual(box.Shape.childShapes()[0].ElementMapSize, 26)
body.addObject(box)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
def testPartDesignElementMapCylinder(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
cylinder = self.Doc.addObject('PartDesign::AdditiveCylinder', 'Cylinder')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(cylinder.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(cylinder.Shape.childShapes()), 1)
self.assertEqual(cylinder.Shape.childShapes()[0].ElementMapSize, 8)
body.addObject(cylinder)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
self.assertEqual(len(reverseMap),8)
self.assertEqual(len(faces),3)
self.assertEqual(len(edges),3)
self.assertEqual(len(vertexes),2)
def testPartDesignElementMapSphere(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sphere = self.Doc.addObject('PartDesign::AdditiveSphere', 'Sphere')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(sphere.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(sphere.Shape.childShapes()), 1)
self.assertEqual(sphere.Shape.childShapes()[0].ElementMapSize, 6)
body.addObject(sphere)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 6)
self.assertEqual(len(reverseMap),6)
self.assertEqual(len(faces),1)
self.assertEqual(len(edges),3)
self.assertEqual(len(vertexes),2)
def testPartDesignElementMapCone(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
cone = self.Doc.addObject('PartDesign::AdditiveCone', 'Cone')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(cone.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(cone.Shape.childShapes()), 1)
self.assertEqual(cone.Shape.childShapes()[0].ElementMapSize, 8)
body.addObject(cone)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
self.assertEqual(len(reverseMap),8)
self.assertEqual(len(faces),3)
self.assertEqual(len(edges),3)
self.assertEqual(len(vertexes),2)
def testPartDesignElementMapEllipsoid(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
ellipsoid = self.Doc.addObject('PartDesign::AdditiveEllipsoid', 'Ellipsoid')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(ellipsoid.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(ellipsoid.Shape.childShapes()), 1)
self.assertEqual(ellipsoid.Shape.childShapes()[0].ElementMapSize, 6)
body.addObject(ellipsoid)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 6)
self.assertEqual(len(reverseMap),6)
self.assertEqual(len(faces),1)
self.assertEqual(len(edges),3)
self.assertEqual(len(vertexes),2)
def testPartDesignElementMapTorus(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
torus = self.Doc.addObject('PartDesign::AdditiveTorus', 'Torus')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(torus.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(torus.Shape.childShapes()), 1)
self.assertEqual(torus.Shape.childShapes()[0].ElementMapSize, 4)
body.addObject(torus)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 4)
self.assertEqual(len(reverseMap),4)
self.assertEqual(len(faces),1)
self.assertEqual(len(edges),2)
self.assertEqual(len(vertexes),1)
def testPartDesignElementMapPrism(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
prism = self.Doc.addObject('PartDesign::AdditivePrism', 'Prism')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(prism.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(prism.Shape.childShapes()), 1)
self.assertEqual(prism.Shape.childShapes()[0].ElementMapSize, 38)
body.addObject(prism)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
self.assertEqual(len(reverseMap),38)
self.assertEqual(len(faces),8)
self.assertEqual(len(edges),18)
self.assertEqual(len(vertexes),12)
def testPartDesignElementMapWedge(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
wedge = self.Doc.addObject('PartDesign::AdditiveWedge', 'Wedge')
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act / Assert
self.assertEqual(len(wedge.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(wedge.Shape.childShapes()), 1)
self.assertEqual(wedge.Shape.childShapes()[0].ElementMapSize, 26)
body.addObject(wedge)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
self.assertEqual(len(reverseMap),26)
self.assertEqual(len(faces),6)
self.assertEqual(len(edges),12)
self.assertEqual(len(vertexes),8)
# body.BaseFeature = box
def testPartDesignElementMapSubBox(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subbox = self.Doc.addObject('PartDesign::SubtractiveBox', 'Box')
subbox.BaseFeature = box
body.addObject(subbox)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 44)
def testPartDesignElementMapSubCylinder(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subcylinder = self.Doc.addObject('PartDesign::SubtractiveCylinder', 'Cylinder')
subcylinder.BaseFeature = box
body.addObject(subcylinder)
# Assert
self.Doc.recompute()
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
def testPartDesignElementMapSubSphere(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subsphere = self.Doc.addObject('PartDesign::SubtractiveSphere', 'Sphere')
subsphere.BaseFeature = box
body.addObject(subsphere)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 33)
def testPartDesignElementMapSubCone(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subcone = self.Doc.addObject('PartDesign::SubtractiveCone', 'Cone')
subcone.BaseFeature = box
body.addObject(subcone)
# Assert
self.Doc.recompute()
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
def testPartDesignElementMapSubEllipsoid(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subellipsoid = self.Doc.addObject('PartDesign::SubtractiveEllipsoid', 'Ellipsoid')
subellipsoid.BaseFeature = box
body.addObject(subellipsoid)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 33)
def testPartDesignElementMapSubTorus(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subtorus = self.Doc.addObject('PartDesign::SubtractiveTorus', 'Torus')
subtorus.BaseFeature = box
body.addObject(subtorus)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
def testPartDesignElementMapSubPrism(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subprism = self.Doc.addObject('PartDesign::SubtractivePrism', 'Prism')
subprism.BaseFeature = box
body.addObject(subprism)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 44)
def testPartDesignElementMapSubWedge(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
box.Length = 20
box.Width = 20
box.Height = 20
body.addObject(box)
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
subwedge = self.Doc.addObject('PartDesign::SubtractiveWedge', 'Wedge')
subwedge.BaseFeature = box
body.addObject(subwedge)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 50)
def testPartDesignElementPadSketch(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
pad.Profile = sketch
body.addObject(sketch)
body.addObject(pad)
self.Doc.recompute()
# Assert
# self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 30)
self.assertEqual(body.Shape.ElementMapSize,30)
self.assertEqual(sketch.Shape.ElementMapSize,12)
self.assertEqual(pad.Shape.ElementMapSize,30)
# Todo: Assert that the names in the ElementMap are good;
# in particular that they are hashed with a # starting
def testPartDesignElementMapRevolution(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
revolution = self.Doc.addObject('PartDesign::Revolution', 'Revolution')
revolution.ReferenceAxis = (self.Doc.getObject('Sketch'),['V_Axis'])
revolution.Profile = sketch # Causing segfault
body.addObject(sketch)
body.addObject(revolution)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
def testPartDesignElementMapLoft(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
sketch2 = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch2, (0, 0), (2, 2))
sketch2.Placement.move(App.Vector(0, 0, 3))
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
loft = self.Doc.addObject('PartDesign::AdditiveLoft', 'Loft')
loft.Profile = sketch
loft.Sections = [sketch2]
body.addObject(sketch)
body.addObject(sketch2)
body.addObject(loft)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 30)
def testPartDesignElementMapPipe(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
sketch2 = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch2, (0, 0), (2, 2))
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
pipe = self.Doc.addObject('PartDesign::AdditivePipe', 'Pipe')
pipe.Profile = sketch
pipe.Spine = sketch2
body.addObject(sketch)
body.addObject(sketch2)
body.addObject(pipe)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 64)
def testPartDesignElementMapHelix(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Act
helix = self.Doc.addObject('PartDesign::AdditiveHelix', 'Helix')
helix.Profile = sketch
helix.ReferenceAxis = (self.Doc.getObject('Sketch'),['V_Axis'])
body.addObject(sketch)
body.addObject(helix)
self.Doc.recompute()
# Assert
self.assertEqual(len(body.Shape.childShapes()), 1)
# The next size can vary based on tOCCT version (26 or 30), so we accept having entries.
self.assertGreaterEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
def testPartDesignElementMapPocket(self):
pass # TODO
def testPartDesignElementMapHole(self):
pass # TODO
def testPartDesignElementMapGroove(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
body.addObject(box)
groove = self.Doc.addObject('PartDesign::Groove', 'Groove')
body.addObject(groove)
groove.ReferenceAxis = (self.Doc.getObject('Y_Axis'), [''])
groove.Angle = 360.0
groove.Profile = (box, ['Face6'])
groove.ReferenceAxis = (box, ['Edge9'])
groove.Midplane = 0
groove.Reversed = 0
groove.Base = App.Vector(0, 0, 0)
self.Doc.recompute()
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Assert
# print(groove.Shape.childShapes()[0].ElementMap)
# TODO: Complete me as part of the subtractive features
def testPartDesignElementMapSubLoft(self):
pass # TODO
def testPartDesignElementMapSubPipe(self):
pass # TODO
def testPartDesignElementMapSubHelix(self):
pass # TODO
def testPartDesignElementMapChamfer(self):
""" Test Chamfer ( and FeatureDressup )"""
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
chamfer = self.Doc.addObject('PartDesign::Chamfer', 'Chamfer')
chamfer.Base = (box, ['Edge1',
'Edge2',
'Edge3',
'Edge4',
'Edge5',
'Edge6',
'Edge7',
'Edge8',
'Edge9',
'Edge10',
'Edge11',
'Edge12',
])
chamfer.Size = 1
chamfer.UseAllEdges = True
# Act / Assert
body.addObject(box)
body.addObject(chamfer)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 98)
self.assertEqual(len(reverseMap),98)
self.assertEqual(len(faces),26) # 6 Faces become 26 ( +8 + 2*6 )
self.assertEqual(len(edges),48) # 12 Edges become 48
self.assertEqual(len(vertexes),24) # 8 Vertices become 24
def testPartDesignElementMapFillet(self):
""" Test Fillet ( and FeatureDressup )"""
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
fillet = self.Doc.addObject('PartDesign::Fillet', 'Fillet')
fillet.Base = (box, ['Edge1',
'Edge2',
'Edge3',
'Edge4',
'Edge5',
'Edge6',
'Edge7',
'Edge8',
'Edge9',
'Edge10',
'Edge11',
'Edge12',
])
# Act / Assert
body.addObject(box)
body.addObject(fillet)
self.Doc.recompute()
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 106)
self.assertEqual(len(reverseMap),106)
self.assertEqual(len(faces),26) # 6 Faces become 26 ( +8 + 2*6 )
self.assertEqual(len(edges),56) # 12 Edges become 56 Why?
self.assertEqual(len(vertexes),24) # 8 Vertices become 24
def testPartDesignElementMapTransform(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
multitransform = self.Doc.addObject('PartDesign::MultiTransform', 'MultiTransform')
scaled = self.Doc.addObject('PartDesign::Scaled', 'Scaled')
scaled.Factor = 2
scaled.Occurrences = 2
multitransform.Transformations = scaled
multitransform.Shape = box.Shape
# Act / Assert
self.Doc.recompute()
body.addObject(box)
body.addObject(multitransform)
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
def testPartDesignElementMapShapeBinder(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
shapebinder = self.Doc.addObject('PartDesign::ShapeBinder', 'ShapeBinder')
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
# Act / Assert
body.addObject(box)
body.addObject(shapebinder)
shapebinder.Support = [box]
self.Doc.recompute()
self.assertEqual(len(shapebinder.Shape.childShapes()), 1)
self.assertEqual(shapebinder.Shape.childShapes()[0].ElementMapSize, 26)
def testPartDesignElementMapSubShapeBinder(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
subshapebinder = self.Doc.addObject('PartDesign::SubShapeBinder', 'SubShapeBinder')
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
# Act / Assert
body.addObject(box)
body.addObject(subshapebinder)
subshapebinder.Support = [ (box, ["Face1"]) ]
self.assertEqual(len(body.Shape.childShapes()), 0)
self.Doc.recompute()
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(subshapebinder.Shape.childShapes()[0].ElementMapSize, 9)
def testSketchElementMap(self):
body = self.Doc.addObject('PartDesign::Body', 'Body')
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
body.addObject(sketch)
self.Doc.recompute()
self.assertEqual(sketch.Shape.ElementMapSize, 12)
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
pad.Profile = sketch
body.addObject(pad)
self.Doc.recompute()
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Assert
self.assertEqual(sketch.Shape.ElementMapSize, 12)
self.assertEqual(pad.Shape.ElementMapSize, 30) # The sketch plus the pad in the map
# TODO: differing results between main and LS3 on these values. Does it matter?
# self.assertEqual(body.Shape.ElementMapSize,0) # 8?
# self.assertEqual(body.Shape.ElementMapSize,30) # 26
def testPlaneElementMap(self):
plane = self.Doc.addObject("Part::Plane", "Plane")
plane.Length = 10
plane.Width = 10
self.Doc.recompute()
self.assertEqual(plane.Shape.ElementMapSize, 0)
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
pad.Profile = plane
self.Doc.recompute()
if pad.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
# Assert
self.assertEqual(plane.Shape.ElementMapSize, 0)
self.assertEqual(pad.Shape.ElementMapSize, 26)
def testChangeSketch(self):
# Arrange
doc = self.Doc
body = doc.addObject('PartDesign::Body', 'Body')
# Make first offset cube Pad
padSketch = doc.addObject('Sketcher::SketchObject', 'Sketch')
body.addObject(padSketch)
TestSketcherApp.CreateRectangleSketch(padSketch, (0, 0), (31.37, 25.2))
doc.recompute()
pad = doc.addObject("PartDesign::Pad", "Pad")
body.addObject(pad)
pad.Profile = padSketch
pad.Length = 10
doc.recompute()
sketch001 = body.newObject('Sketcher::SketchObject','Sketch001')
sketch001 = doc.Sketch001
sketch001.AttachmentSupport = (doc.getObject('Pad'),['Face6',])
sketch001.MapMode = 'FlatFace'
App.ActiveDocument.recompute()
geoList = []
geoList.append(Part.Circle(App.Vector(15.093666, 13.036922, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000), 5.000000))
sketch001.addGeometry(geoList,False)
del geoList
sketch001.addConstraint(Sketcher.Constraint('Radius',0,5.000000))
doc.recompute()
pad001 = body.newObject('PartDesign::Pad','Pad001')
pad001.Profile = doc.getObject('Sketch001')
pad001.Length = 10
App.ActiveDocument.recompute()
pad001.ReferenceAxis = (doc.getObject('Sketch001'),['N_Axis'])
sketch001.Visibility = False
App.ActiveDocument.recompute()
pad001.Length = 10.000000
pad001.TaperAngle = 0.000000
pad001.UseCustomVector = 0
pad001.Direction = (0, 0, 1)
pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
pad001.AlongSketchNormal = 1
pad001.Type = 0
pad001.UpToFace = None
pad001.Reversed = 0
pad001.Midplane = 0
pad001.Offset = 0
doc.recompute()
doc.getObject('Pad').Visibility = False
doc.getObject('Sketch001').Visibility = False
# Modify the original sketch to generate TNP issue
geoList = []
geoList.append(Part.LineSegment(App.Vector(2.510468, 22.837425, 0.000000),
App.Vector(2.510468, 19.933617, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(2.510468, 19.933617, 0.000000),
App.Vector(4.869811, 19.933617, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(4.869811, 19.933617, 0.000000),
App.Vector(4.869811, 22.837425, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(4.869811, 22.837425, 0.000000),
App.Vector(2.510468, 22.837425, 0.000000)))
padSketch.addGeometry(geoList,False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
constraintList.append(Sketcher.Constraint('Vertical', 4))
constraintList.append(Sketcher.Constraint('Vertical', 6))
constraintList.append(Sketcher.Constraint('Horizontal', 5))
constraintList.append(Sketcher.Constraint('Horizontal', 7))
padSketch.addConstraint(constraintList)
del constraintList
doc.recompute()
# Assert
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
self.assertEqual(body.Shape.BoundBox.XMin,0)
self.assertEqual(body.Shape.BoundBox.YMin,0)
self.assertEqual(body.Shape.BoundBox.ZMin,0)
self.assertEqual(body.Shape.BoundBox.XMax,31.37)
self.assertEqual(body.Shape.BoundBox.YMax,25.2)
self.assertEqual(body.Shape.BoundBox.ZMax,20)
def testApplyFillet(self):
# Arrange
doc = self.Doc
body = doc.addObject('PartDesign::Body', 'Body')
# Make first offset cube Pad
padSketch = doc.addObject('Sketcher::SketchObject', 'Sketch')
body.addObject(padSketch)
TestSketcherApp.CreateRectangleSketch(padSketch, (0, 0), (31.37, 25.2))
doc.recompute()
pad = doc.addObject("PartDesign::Pad", "Pad")
body.addObject(pad)
pad.Profile = padSketch
pad.Length = 10
doc.recompute()
sketch001 = body.newObject('Sketcher::SketchObject','Sketch001')
sketch001.AttachmentSupport = (doc.getObject('Pad'),['Face6',])
sketch001.MapMode = 'FlatFace'
geoList = []
geoList.append(Part.Circle(App.Vector(15.093666, 13.036922, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000), 5.000000))
sketch001.addGeometry(geoList,False)
del geoList
sketch001.addConstraint(Sketcher.Constraint('Radius',0,5.000000))
doc.recompute()
pad001 = body.newObject('PartDesign::Pad','Pad001')
pad001.Profile = doc.getObject('Sketch001')
pad001.Length = 10
App.ActiveDocument.recompute()
pad001.ReferenceAxis = (doc.getObject('Sketch001'),['N_Axis'])
sketch001.Visibility = False
App.ActiveDocument.recompute()
pad001.Length = 10.000000
pad001.TaperAngle = 0.000000
pad001.UseCustomVector = 0
pad001.Direction = (0, 0, 1)
pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
pad001.AlongSketchNormal = 1
pad001.Type = 0
pad001.UpToFace = None
pad001.Reversed = 0
pad001.Midplane = 0
pad001.Offset = 0
doc.recompute()
doc.getObject('Pad').Visibility = False
doc.getObject('Sketch001').Visibility = False
area1 = pad.Shape.Area
# Act
doc.getObject('Sketch').fillet(2,3,
App.Vector(6.673934,25.000000,0),
App.Vector(0.000000,21.980343,0),
4.740471,True,True,False)
doc.recompute()
area2 = pad.Shape.Area
# Assert
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
self.assertEqual(body.Shape.BoundBox.XMin,0)
self.assertEqual(body.Shape.BoundBox.YMin,0)
self.assertEqual(body.Shape.BoundBox.ZMin,0)
self.assertEqual(body.Shape.BoundBox.XMax,31.37)
self.assertAlmostEqual(body.Shape.BoundBox.YMax,25.2)
self.assertEqual(body.Shape.BoundBox.ZMax,20)
self.assertNotEqual(area1, area2)
def testShapeBinder(self):
doc = self.Doc
self.Body = doc.addObject('PartDesign::Body', 'TNP_Test_Body_SubShape')
doc.getObject('TNP_Test_Body_SubShape').Label = 'TNP_Test_Body_SubShape'
doc.recompute()
doc.getObject('TNP_Test_Body_SubShape').newObject('Sketcher::SketchObject', 'Sketch')
doc.Sketch.AttachmentSupport = (doc.getObject('XY_Plane'), [''])
doc.Sketch.MapMode = 'FlatFace'
doc.recompute()
geoList = []
geoList.append(
Part.LineSegment(App.Vector(0.000000, 0.000000, 0.000000),
App.Vector(35.000000, 0.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(35.000000, 0.000000, 0.000000),
App.Vector(35.000000, 25.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(35.000000, 25.000000, 0.000000),
App.Vector(0.000000, 25.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(0.000000, 25.000000, 0.000000),
App.Vector(0.000000, 0.000000, 0.000000)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
constraintList.append(Sketcher.Constraint('Horizontal', 0))
constraintList.append(Sketcher.Constraint('Horizontal', 2))
constraintList.append(Sketcher.Constraint('Vertical', 1))
constraintList.append(Sketcher.Constraint('Vertical', 3))
doc.Sketch.addConstraint(constraintList)
del constraintList
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 1, 1, 3, 2, 35.000000))
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 0, 1, 2, 2, 25.000000))
doc.Sketch.addConstraint(Sketcher.Constraint('Coincident', 0, 1, -1, 1))
doc.recompute()
doc.getObject('TNP_Test_Body_SubShape').newObject('PartDesign::Pad', 'Pad')
doc.Pad.Profile = doc.Sketch
doc.Pad.Length = 10
doc.recompute()
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
doc.Sketch.Visibility = False
doc.recompute()
doc.Pad.Length = 10.000000
doc.Pad.TaperAngle = 0.000000
doc.Pad.UseCustomVector = 0
doc.Pad.Direction = (0, 0, 1)
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
doc.Pad.AlongSketchNormal = 1
doc.Pad.Type = 0
doc.Pad.UpToFace = None
doc.Pad.Reversed = 0
doc.Pad.Midplane = 0
doc.Pad.Offset = 0
doc.recompute()
doc.Sketch.Visibility = False
doc.addObject('PartDesign::Body', 'TNP_Test_Body_Second')
doc.getObject('TNP_Test_Body_Second').Label = 'TNP_Test_Body_Second'
doc.recompute()
obj = doc.getObject('TNP_Test_Body_Second').newObject('PartDesign::ShapeBinder',
'ShapeBinder')
obj.Support = (doc.getObject("TNP_Test_Body_SubShape"), [u'Face6'])
doc.recompute()
doc.getObject('TNP_Test_Body_Second').newObject('Sketcher::SketchObject', 'Sketch001')
doc.getObject('Sketch001').AttachmentSupport = (doc.getObject('ShapeBinder'), [''])
doc.getObject('Sketch001').MapMode = 'FlatFace'
doc.recompute()
geoList = []
geoList.append(
Part.Circle(App.Vector(14.725412, 16.666899, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000), 2.162720))
doc.getObject('Sketch001').addGeometry(geoList, False)
del geoList
doc.recompute()
doc.getObject('TNP_Test_Body_Second').newObject('PartDesign::Pad', 'Pad001')
doc.getObject('Pad001').Profile = doc.getObject('Sketch001')
doc.getObject('Pad001').Length = 10
doc.recompute()
doc.getObject('Pad001').ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
doc.getObject('Sketch001').Visibility = False
doc.recompute()
doc.getObject('Pad001').Length = 10.000000
doc.getObject('Pad001').TaperAngle = 0.000000
doc.getObject('Pad001').UseCustomVector = 0
doc.getObject('Pad001').Direction = (0, 0, 1)
doc.getObject('Pad001').ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
doc.getObject('Pad001').AlongSketchNormal = 1
doc.getObject('Pad001').Type = 0
doc.getObject('Pad001').UpToFace = None
doc.getObject('Pad001').Reversed = 0
doc.getObject('Pad001').Midplane = 0
doc.getObject('Pad001').Offset = 0
doc.recompute()
doc.getObject('ShapeBinder').Visibility = False
doc.getObject('Sketch001').Visibility = False
geoList = []
geoList.append(
Part.LineSegment(App.Vector(28.380075, 21.486303, 0.000000),
App.Vector(28.380075, 15.462212, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(28.380075, 15.462212, 0.000000),
App.Vector(32.797741, 15.462212, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(32.797741, 15.462212, 0.000000),
App.Vector(32.797741, 21.486303, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(32.797741, 21.486303, 0.000000),
App.Vector(28.380075, 21.486303, 0.000000)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
constraintList.append(Sketcher.Constraint('Vertical', 4))
constraintList.append(Sketcher.Constraint('Vertical', 6))
constraintList.append(Sketcher.Constraint('Horizontal', 5))
constraintList.append(Sketcher.Constraint('Horizontal', 7))
doc.Sketch.addConstraint(constraintList)
del constraintList
doc.recompute()
# Assert
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
self.assertEqual(self.Body.Shape.BoundBox.XMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.YMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.ZMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.XMax, 35)
self.assertEqual(self.Body.Shape.BoundBox.YMax, 25)
self.assertEqual(self.Body.Shape.BoundBox.ZMax, 10)
def testSubShapeBinder(self):
doc = self.Doc
self.Body = doc.addObject('PartDesign::Body', 'Body')
doc.Body.Label = 'Body'
doc.recompute()
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
doc.Sketch.AttachmentSupport = (doc.getObject('XY_Plane'), [''])
doc.Sketch.MapMode = 'FlatFace'
doc.recompute()
geoList = []
geoList.append(
Part.LineSegment(App.Vector(0.000000, 0.000000, 0.000000),
App.Vector(35.000000, 0.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(35.000000, 0.000000, 0.000000),
App.Vector(35.000000, 25.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(35.000000, 25.000000, 0.000000),
App.Vector(0.000000, 25.000000, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(0.000000, 25.000000, 0.000000),
App.Vector(0.000000, 0.000000, 0.000000)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
constraintList.append(Sketcher.Constraint('Horizontal', 0))
constraintList.append(Sketcher.Constraint('Horizontal', 2))
constraintList.append(Sketcher.Constraint('Vertical', 1))
constraintList.append(Sketcher.Constraint('Vertical', 3))
doc.Sketch.addConstraint(constraintList)
del constraintList
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 1, 1, 3, 2, 35.000000))
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 0, 1, 2, 2, 25.000000))
doc.Sketch.addConstraint(Sketcher.Constraint('Coincident', 0, 1, -1, 1))
doc.recompute()
doc.Body.newObject('PartDesign::Pad', 'Pad')
doc.Pad.Profile = doc.Sketch
doc.Pad.Length = 10
doc.recompute()
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
doc.Sketch.Visibility = False
doc.Pad.Length = 10.000000
doc.Pad.TaperAngle = 0.000000
doc.Pad.UseCustomVector = 0
doc.Pad.Direction = (0, 0, 1)
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
doc.Pad.AlongSketchNormal = 1
doc.Pad.Type = 0
doc.Pad.UpToFace = None
doc.Pad.Reversed = 0
doc.Pad.Midplane = 0
doc.Pad.Offset = 0
doc.recompute()
doc.Sketch.Visibility = False
doc.addObject('PartDesign::Body', 'Body001')
doc.getObject('Body001').Label = 'Body'
doc.recompute()
binder = doc.getObject('Body001').newObject('PartDesign::SubShapeBinder', 'Binder')
binder.Support = self.Body
doc.getObject('Body001').newObject('Sketcher::SketchObject', 'Sketch001')
doc.getObject('Sketch001').AttachmentSupport = (doc.getObject('Binder'), ['Face6', ])
doc.getObject('Sketch001').MapMode = 'FlatFace'
doc.recompute()
geoList = []
geoList.append(
Part.Circle(App.Vector(16.566162, 13.537925, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000), 2.197371))
doc.getObject('Sketch001').addGeometry(geoList, False)
del geoList
doc.recompute()
### Begin command PartDesign_Pad
doc.getObject('Body001').newObject('PartDesign::Pad', 'Pad001')
doc.Pad001.Profile = doc.getObject('Sketch001')
doc.Pad001.Length = 10
doc.recompute()
doc.Pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
doc.getObject('Sketch001').Visibility = False
doc.recompute()
doc.Pad001.Length = 10.000000
doc.Pad001.TaperAngle = 0.000000
doc.Pad001.UseCustomVector = 0
doc.Pad001.Direction = (0, 0, 1)
doc.Pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
doc.Pad001.AlongSketchNormal = 1
doc.Pad001.Type = 0
doc.Pad001.UpToFace = None
doc.Pad001.Reversed = 0
doc.Pad001.Midplane = 0
doc.Pad001.Offset = 0
doc.recompute()
doc.getObject('Binder').Visibility = False
doc.getObject('Sketch001').Visibility = False
geoList = []
geoList.append(
Part.LineSegment(App.Vector(30.009926, 21.026653, 0.000000),
App.Vector(30.009926, 16.425089, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(30.009926, 16.425089, 0.000000),
App.Vector(31.994911, 16.425089, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(31.994911, 16.425089, 0.000000),
App.Vector(31.994911, 21.026653, 0.000000)))
geoList.append(
Part.LineSegment(App.Vector(31.994911, 21.026653, 0.000000),
App.Vector(30.009926, 21.026653, 0.000000)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
constraintList.append(Sketcher.Constraint('Vertical', 4))
constraintList.append(Sketcher.Constraint('Vertical', 6))
constraintList.append(Sketcher.Constraint('Horizontal', 5))
constraintList.append(Sketcher.Constraint('Horizontal', 7))
doc.Sketch.addConstraint(constraintList)
del constraintList
doc.recompute()
# Assert
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
self.assertEqual(self.Body.Shape.BoundBox.XMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.YMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.ZMin, 0)
self.assertEqual(self.Body.Shape.BoundBox.XMax, 35)
self.assertEqual(self.Body.Shape.BoundBox.YMax, 25)
self.assertEqual(self.Body.Shape.BoundBox.ZMax, 10)
def testPartDesignTNPChamfer(self):
""" Test Chamfer """
# Arrange
doc = self.Doc
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
body.addObject(box)
self.Doc.recompute()
volume1 = body.Shape.Volume
chamfer = self.Doc.addObject('PartDesign::Chamfer', 'Chamfer')
chamfer.Base = (box, ['Edge1',
'Edge5',
'Edge7',
])
chamfer.Size = 1
body.addObject(chamfer)
self.Doc.recompute()
volume2 = body.Shape.Volume
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
doc.Sketch.AttachmentSupport = (chamfer, "Face8")
doc.Sketch.MapMode = 'FlatFace'
doc.recompute()
x1, x2, y1, y2 = 10 / math.sqrt(2) - math.sqrt(2), 10 / math.sqrt(2) + math.sqrt(2), 6, 11
geoList = []
geoList.append(
Part.LineSegment(App.Vector(x1, y1, 0.0 ),
App.Vector(x1, y2, 0.0 )))
geoList.append(
Part.LineSegment(App.Vector(x1, y2, 0.0),
App.Vector(x2, y2, 0.0)))
geoList.append(
Part.LineSegment(App.Vector(x2, y2, 0.0),
App.Vector(x2, y1, 0.0)))
geoList.append(
Part.LineSegment(App.Vector(x2, y1, 0.0),
App.Vector(x1, y1, 0.0)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
constraintList.append(Sketcher.Constraint('Horizontal', 0))
constraintList.append(Sketcher.Constraint('Horizontal', 2))
constraintList.append(Sketcher.Constraint('Vertical', 1))
constraintList.append(Sketcher.Constraint('Vertical', 3))
doc.Sketch.addConstraint(constraintList)
del constraintList
body.addObject(doc.Sketch)
pocket = self.Doc.addObject('PartDesign::Pocket', 'Pocket')
pocket.Type = "Length"
pocket.Length = 3
pocket.Direction = App.Vector(-0.710000000,0.7100000000, 0.0000000000)
pocket.Profile = doc.Sketch
body.addObject(pocket)
self.Doc.recompute()
volume3 = body.Shape.Volume
# Change the chamfered edges, potentially triggering TNP
chamfer.Base = (box, ['Edge5',
'Edge7',
])
self.Doc.recompute()
volume4 = body.Shape.Volume
# Assert
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 62)
self.assertEqual(len(reverseMap),62)
self.assertEqual(len(faces),12)
self.assertEqual(len(edges),30)
self.assertEqual(len(vertexes),20)
boxVolume = 10 * 10 * 10
chamferVolume = 1 * 1 * 0.5 * 10
# cut area is rectangle with sqrt(2) as one side minus 2 isosceles right triangles
cutArea = (2 * math.sqrt(2)) * 3 - ((math.sqrt(2)/2 * math.sqrt(2)/2)/2)*2
cutVolume = cutArea * 4 # height is 4 ( 11-6 with a limit of 10 from the box )
self.assertAlmostEqual(volume1, boxVolume )
self.assertAlmostEqual(volume2, boxVolume - 3 * chamferVolume)
self.assertAlmostEqual(volume3, boxVolume - 3 * chamferVolume - cutVolume, 4)
self.assertAlmostEqual(volume4, boxVolume - 2 * chamferVolume - cutVolume, 4)
def testPartDesignTNPFillet(self):
""" Test Fillet """
# Arrange
doc = self.Doc
body = self.Doc.addObject('PartDesign::Body', 'Body')
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
body.addObject(box)
self.Doc.recompute()
volume1 = body.Shape.Volume
fillet = self.Doc.addObject('PartDesign::Fillet', 'Fillet')
fillet.Base = (box, ['Edge1',
'Edge5',
'Edge7',
])
# fillet.Size = 1
body.addObject(fillet)
self.Doc.recompute()
volume2 = body.Shape.Volume
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
doc.Sketch.AttachmentSupport = (fillet, "Face2")
doc.Sketch.MapMode = 'FlatFace'
doc.recompute()
x1, x2, y1, y2 = 4,6 , 6, 11
geoList = []
geoList.append(
Part.LineSegment(App.Vector(x1, y1, 0.0 ),
App.Vector(x1, y2, 0.0 )))
geoList.append(
Part.LineSegment(App.Vector(x1, y2, 0.0),
App.Vector(x2, y2, 0.0)))
geoList.append(
Part.LineSegment(App.Vector(x2, y2, 0.0),
App.Vector(x2, y1, 0.0)))
geoList.append(
Part.LineSegment(App.Vector(x2, y1, 0.0),
App.Vector(x1, y1, 0.0)))
doc.Sketch.addGeometry(geoList, False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
constraintList.append(Sketcher.Constraint('Horizontal', 0))
constraintList.append(Sketcher.Constraint('Horizontal', 2))
constraintList.append(Sketcher.Constraint('Vertical', 1))
constraintList.append(Sketcher.Constraint('Vertical', 3))
doc.Sketch.addConstraint(constraintList)
del constraintList
body.addObject(doc.Sketch)
pocket = self.Doc.addObject('PartDesign::Pocket', 'Pocket')
pocket.Type = "Length"
pocket.Length = 3
pocket.Direction = App.Vector(-0.710000000,0.7100000000, 0.0000000000)
pocket.Profile = doc.Sketch
# pocket.Reversed = False
body.addObject(pocket)
self.Doc.recompute()
volume3 = body.Shape.Volume
# Change the filleted edges, potentially triggering TNP
fillet.Base = (box, ['Edge5',
'Edge7',
])
self.Doc.recompute()
volume4 = body.Shape.Volume
# Assert
if body.Shape.ElementMapVersion == "": # Skip without element maps.
return
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
self.assertEqual(len(body.Shape.childShapes()), 1)
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 64)
self.assertEqual(len(reverseMap),62)
self.assertEqual(len(faces),12)
self.assertEqual(len(edges),30)
self.assertEqual(len(vertexes),20)
boxVolume = 10 * 10 * 10
# Full prism minus the rounded triangle prism.
filletVolume = 1 * 1 * 10 - 1 * 1 * math.pi / 4 * 10 #0.5 * 10
cutVolume = 24
self.assertAlmostEqual(volume1, boxVolume )
self.assertAlmostEqual(volume2, boxVolume - 3 * filletVolume)
self.assertAlmostEqual(volume3, boxVolume - 3 * filletVolume - cutVolume, 4)
self.assertAlmostEqual(volume4, boxVolume - 2 * filletVolume - cutVolume, 4)
def testSubelementNames(self):
# Arrange
doc = App.ActiveDocument
plane = doc.addObject("Part::Plane", "Plane")
plane.Length = 10
plane.Width = 10
extrude = doc.addObject("Part::Extrusion", "Extrude")
extrude.Base = plane
extrude.LengthFwd = 10
doc.recompute()
if not App.GuiUp:
return
# Act
App.Gui.Selection.addSelection("", extrude.Name, "Face2")
# Assert
self.assertEqual(len(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames),1)
if extrude.ElementMapVersion == "": # Should be '4' as of Mar 2023.
self.assertEqual(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames[0],"Face2")
else:
self.assertEqual(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames[0][-8:],",F.Face2")
def testGetElementFunctionality(self):
# Arrange
body = self.Doc.addObject('PartDesign::Body', 'Body')
padSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
pad = self.Doc.addObject("PartDesign::Pad", "Pad")
body.addObject(padSketch)
body.addObject(pad)
TestSketcherApp.CreateRectangleSketch(padSketch, (0, 0), (1, 1))
pad.Profile = padSketch
pad.Length = 1
# Act
self.Doc.recompute()
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
return
map = pad.Shape.ElementMap
# Assert
for tnpName in map.keys():
element1 = body.Shape.getElement(tnpName)
element2 = body.Shape.getElement(map[tnpName])
self.assertTrue(element1.isSame(element2))
def testFileSaveRestore(self):
# Arrange
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
self.create_t_sketch()
self.assertEqual(self.Doc.Sketch.Shape.ElementMapSize, 18)
filename = self.Doc.Name
# Act
self.Doc.saveAs(filename)
App.closeDocument(filename)
self.Doc = App.openDocument(filename+".FCStd")
self.Doc.recompute()
# Assert
self.assertEqual(self.Doc.Sketch.Shape.ElementMapSize, 18)
def testBodySubShapeBinderElementMap(self):
# Arrange
doc = App.ActiveDocument
doc.addObject("Part::Box","Box")
doc.ActiveObject.Label = "Cube"
doc.addObject("Part::Box","Box")
doc.ActiveObject.Label = "Cube"
doc.addObject("Part::MultiFuse","Fusion")
doc.Fusion.Shapes = [doc.Box, doc.Box001,]
doc.recompute()
self.assertEqual(doc.Fusion.Shape.ElementMapSize, 26)
doc.addObject('PartDesign::Body','Body')
doc.Body.Label = 'Body'
doc.addObject('PartDesign::Body','Body001')
doc.Body001.Label = 'Body001'
# act
# Set up the subshapebinder version
binder = doc.Body.newObject('PartDesign::SubShapeBinder','Binder')
binder.Support = [(doc.Fusion, (""))]
doc.recompute()
# Set up the base feature version
doc.Body001.BaseFeature = App.activeDocument().Fusion
doc.recompute()
# assert
self.assertEqual(doc.Body.OutList[1].Shape.ElementMapSize, 26) # subobjects ( subshapebinder here ) should have elementmap
self.assertEqual(doc.Body.Shape.ElementMapSize, 0) # TODO: This is Sus, although LS3 passes. Might be because
# SubShapeBinder is different in LS3.
self.assertEqual(doc.Body001.BaseFeature.Shape.ElementMapSize, 26) # base feature lookup should have element map
self.assertEqual(doc.Body001.Shape.ElementMapSize, 26) # Body Shape should have element map
def testBaseFeatureAttachmentSupport(self):
# Arrange
doc = App.ActiveDocument
doc.addObject("Part::Box","Box")
doc.ActiveObject.Label = "Cube"
doc.recompute()
doc.addObject("Part::Box","Box")
doc.ActiveObject.Label = "Cube"
doc.Box001.Placement=App.Placement(App.Vector(5.00,5.00,5.00),App.Rotation(App.Vector(0.00,0.00,1.00),0.00))
doc.recompute()
doc.addObject("Part::MultiFuse","Fusion")
doc.Fusion.Shapes = [doc.Box, doc.Box001,]
doc.recompute()
# doc.Box.Visibility = False
# doc.Box001.Visibility = False
# doc.recompute()
doc.addObject('PartDesign::Body','Body')
doc.Body.Label = 'Body'
doc.Body.BaseFeature = App.activeDocument().Fusion
doc.recompute()
doc.Body.newObject('Sketcher::SketchObject','Sketch')
doc.Sketch.AttachmentSupport = (doc.getObject('BaseFeature'), ('Face8'))
doc.Sketch.MapMode = 'FlatFace'
doc.recompute()
geoList = []
geoList.append(Part.LineSegment(App.Vector(12.0, 13.0, 0.000000),App.Vector(12.0, 11.0, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(12.0, 11, 0.000000),App.Vector(14.0, 11.0, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(14.0, 11, 0.000000),App.Vector(14.0, 13.0, 0.000000)))
geoList.append(Part.LineSegment(App.Vector(14.0, 13.0, 0.000000),App.Vector(12, 13.0, 0.000000)))
doc.Sketch.addGeometry(geoList,False)
del geoList
constraintList = []
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
constraintList.append(Sketcher.Constraint('Vertical', 0))
constraintList.append(Sketcher.Constraint('Vertical', 2))
constraintList.append(Sketcher.Constraint('Horizontal', 1))
constraintList.append(Sketcher.Constraint('Horizontal', 3))
doc.Sketch.addConstraint(constraintList)
del constraintList
constraintList = []
doc.recompute()
# Assert that we have a sketch element map before proceeding
self.assertEqual(doc.Sketch.Shape.ElementMapSize,12)
# Arrange
doc.Body.newObject('PartDesign::Pad','Pad')
doc.Pad.Profile = (doc.Sketch, ['',])
doc.Pad.Length = 10
doc.recompute()
doc.Pad.ReferenceAxis = (doc.Sketch,['N_Axis'])
doc.Sketch.Visibility = False
doc.Pad.Length = 10.000000
doc.Pad.TaperAngle = 0.000000
doc.Pad.UseCustomVector = 0
doc.Pad.Direction = (0, -1, 0)
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
doc.Pad.AlongSketchNormal = 1
doc.Pad.Type = 0
doc.Pad.UpToFace = None
doc.Pad.Reversed = 0
doc.Pad.Midplane = 0
doc.Pad.Offset = 0
doc.BaseFeature.Visibility = False
doc.Sketch.Visibility = False
doc.recompute()
# Act
doc.Box001.Width='3.00 mm'
doc.Box001.Placement=App.Placement(App.Vector(5.00,5.00,5.00),App.Rotation(App.Vector(0.00,0.00,1.00),0.00))
doc.recompute()
# Assert
self.assertEqual(len(doc.Body.Shape.Faces),17) # Check that the object seems right.
self.assertEqual(len(doc.Body.Shape.Edges),42)
self.assertEqual(len(doc.Body.Shape.Vertexes),28)
self.assertEqual(len(doc.Body.Shape.Shells),1)
self.assertEqual(len(doc.Body.Shape.Solids),1)
self.assertEqual(doc.Sketch.AttachmentSupport[0][1][0], 'Face9') # Attachment autochanged from Face8.
# potentially check the .BoundBox ( calc seems off on this, Not applying sketch position to Pad object )
def create_t_sketch(self):
self.Doc.getObject('Body').newObject('Sketcher::SketchObject', 'Sketch')
geo_list = [
Part.LineSegment(App.Vector(0, 0, 0), App.Vector(20, 0, 0)),
Part.LineSegment(App.Vector(20, 0, 0), App.Vector(20, 10, 0)),
Part.LineSegment(App.Vector(20, 10, 0), App.Vector(10, 10, 0)),
Part.LineSegment(App.Vector(10, 10, 0), App.Vector(10, 20, 0)),
Part.LineSegment(App.Vector(10, 20, 0), App.Vector(0, 20, 0)),
Part.LineSegment(App.Vector(0, 20, 0), App.Vector(0, 0, 0))]
self.Doc.getObject('Sketch').addGeometry(geo_list, False)
con_list = [
Sketcher.Constraint('Coincident', 0, 2, 1, 1),
Sketcher.Constraint('Coincident', 1, 2, 2, 1),
Sketcher.Constraint('Coincident', 2, 2, 3, 1),
Sketcher.Constraint('Coincident', 3, 2, 4, 1),
Sketcher.Constraint('Coincident', 4, 2, 5, 1),
Sketcher.Constraint('Coincident', 5, 2, 0, 1),
Sketcher.Constraint('Horizontal', 0),
Sketcher.Constraint('Horizontal', 2),
Sketcher.Constraint('Horizontal', 4),
Sketcher.Constraint('Vertical', 1),
Sketcher.Constraint('Vertical', 3),
Sketcher.Constraint('Vertical', 5)]
self.Doc.getObject('Sketch').addConstraint(con_list)
del geo_list, con_list
self.Doc.recompute()
def testRectanglewithArcChangeinGlobalCenter(self):
# Arrange
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
# Make first offset cube Pad
self.PadSketch = self.Doc.addObject("Sketcher::SketchObject", "Sketch")
self.Body.addObject(self.PadSketch)
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-50, -25), (100, 50))
self.Doc.recompute()
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
self.Body.addObject(self.Pad)
self.Pad.Profile = self.PadSketch
self.Pad.Length = 10
self.Doc.recompute()
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
self.Sketch001.AttachmentSupport = (
self.Doc.getObject("Pad"),
[
"Face6",
],
)
self.Sketch001.MapMode = "FlatFace"
TestSketcherApp.CreateRectangleSketch(self.Sketch001, (-40, -20), (80, 40))
self.Doc.recompute()
self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
self.Body.addObject(self.Pad1)
self.Pad1.Profile = self.Sketch001
self.Pad1.Length = 10
self.Doc.recompute()
self.geoList = []
self.geoList.append(
Part.ArcOfCircle(
Part.Circle(
App.Vector(0.000000, -109.419670, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000),
88.713871,
),
1.258384,
1.886112,
)
)
self.PadSketch.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 3, -2))
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 1, 2))
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 2, 2))
self.PadSketch.addConstraint(self.constraintList)
del self.constraintList
self.PadSketch.trim(2, App.Vector(7.337847, -25.000000, 0))
self.PadSketch.addConstraint(Sketcher.Constraint("Equal", 3, 1))
self.PadSketch.addConstraint(Sketcher.Constraint("Horizontal", 5))
self.PadSketch.addConstraint(Sketcher.Constraint("Radius", 4, 73.031111))
self.PadSketch.setDatum(18, App.Units.Quantity("70.000000 mm"))
self.PadSketch.addConstraint(
Sketcher.Constraint("DistanceY", 4, 3, -1, 1, 88.867210)
)
self.PadSketch.setDatum(19, App.Units.Quantity("80.000000 mm"))
self.Doc.recompute()
self.assertTrue(self.Sketch001.isValid())
def testRectanglewithArcChangeinGlobalUpperRight(self):
# Arrange
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
# Make first offset cube Pad
self.PadSketch = self.Body.newObject("Sketcher::SketchObject", "Sketch")
self.PadSketch.AttachmentSupport = (self.Doc.getObject("XY_Plane"), [""])
self.PadSketch.MapMode = "FlatFace"
self.Doc.recompute()
lastGeoId = len(self.PadSketch.Geometry)
self.geoList = []
self.geoList.append(
Part.LineSegment(
App.Vector(6.565019, 5.821458, 0.000000),
App.Vector(131.750198, 5.821458, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(131.750198, 5.821458, 0.000000),
App.Vector(131.750198, 75.265900, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(131.750198, 75.265900, 0.000000),
App.Vector(6.565019, 75.265900, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(6.565019, 75.265900, 0.000000),
App.Vector(6.565019, 5.821458, 0.000000),
)
)
self.PadSketch.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
self.constraintList.append(Sketcher.Constraint("Horizontal", 0))
self.constraintList.append(Sketcher.Constraint("Horizontal", 2))
self.constraintList.append(Sketcher.Constraint("Vertical", 1))
self.constraintList.append(Sketcher.Constraint("Vertical", 3))
self.PadSketch.addConstraint(self.constraintList)
del self.constraintList
self.Doc.recompute()
self.Pad = self.Body.newObject("PartDesign::Pad", "Pad")
self.Pad.Profile = (
self.Doc.getObject("Sketch"),
[
"",
],
)
self.Pad.Length = 10
self.Doc.recompute()
self.Pad.ReferenceAxis = (self.Doc.getObject("Sketch"), ["N_Axis"])
self.Doc.recompute()
self.Pad.Length = 10.000000
self.Pad.TaperAngle = 0.000000
self.Pad.UseCustomVector = 0
self.Pad.Direction = (0, 0, 1)
self.Pad.ReferenceAxis = (self.Doc.getObject("Sketch"), ["N_Axis"])
self.Pad.AlongSketchNormal = 1
self.Pad.Type = 0
self.Pad.UpToFace = None
self.Pad.Reversed = 0
self.Pad.Midplane = 0
self.Pad.Offset = 0
self.Doc.recompute()
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
self.Sketch001.AttachmentSupport = (
self.Doc.getObject("Pad"),
[
"Face6",
],
)
self.Sketch001.MapMode = "FlatFace"
self.Doc.recompute()
lastGeoId = len(self.Sketch001.Geometry)
self.geoList = []
self.geoList.append(
Part.LineSegment(
App.Vector(33.048996, 24.872660, 0.000000),
App.Vector(125.086029, 24.872660, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(125.086029, 24.872660, 0.000000),
App.Vector(125.086029, 72.835625, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(125.086029, 72.835625, 0.000000),
App.Vector(33.048996, 72.835625, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(33.048996, 72.835625, 0.000000),
App.Vector(33.048996, 24.872660, 0.000000),
)
)
self.Sketch001.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
self.constraintList.append(Sketcher.Constraint("Horizontal", 0))
self.constraintList.append(Sketcher.Constraint("Horizontal", 2))
self.constraintList.append(Sketcher.Constraint("Vertical", 1))
self.constraintList.append(Sketcher.Constraint("Vertical", 3))
self.Sketch001.addConstraint(self.constraintList)
del self.constraintList
self.Doc.recompute()
self.Pad1 = self.Body.newObject("PartDesign::Pad", "Pad001")
self.Pad1.Profile = (
self.Doc.getObject("Sketch001"),
[
"",
],
)
self.Pad1.Length = 10
self.Doc.recompute()
self.Pad1.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
self.Doc.recompute()
self.Pad1.Length = 10.000000
self.Pad1.TaperAngle = 0.000000
self.Pad1.UseCustomVector = 0
self.Pad1.Direction = (0, 0, 1)
self.Pad1.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
self.Pad1.AlongSketchNormal = 1
self.Pad1.Type = 0
self.Pad1.UpToFace = None
self.Pad1.Reversed = 0
self.Pad1.Midplane = 0
self.Pad1.Offset = 0
self.Doc.recompute()
lastGeoId = len(self.Sketch001.Geometry)
self.geoList = []
self.geoList.append(
Part.ArcOfCircle(
Part.Circle(
App.Vector(73.611900, -60.502949, 0.000000),
App.Vector(0.000000, 0.000000, 1.000000),
80.806032,
),
0.997061,
2.178808,
)
)
self.PadSketch.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 2, 0))
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 1, 0))
self.PadSketch.addConstraint(self.constraintList)
del self.constraintList
self.Doc.recompute()
self.PadSketch.trim(0, App.Vector(69.157609, 5.865876, 0))
self.Doc.recompute()
self.assertTrue(self.Sketch001.isValid())
def testPadChange_UpToFirst_to_Dimension(self):
# Arrange
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
# Make first offset cube Pad
self.PadSketch = self.Doc.addObject("Sketcher::SketchObject", "Sketch")
self.Body.addObject(self.PadSketch)
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-42.5, -42.5), (85, 85))
self.Doc.recompute()
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-37.5, -37.5), (75, 75))
self.Doc.recompute()
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
self.Body.addObject(self.Pad)
self.Pad.Profile = self.PadSketch
self.Pad.Length = 10
self.Doc.recompute()
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
self.Sketch001.AttachmentSupport = (
self.Doc.getObject("Pad"),
[
"Face5",
],
)
self.Sketch001.MapMode = "FlatFace"
self.Doc.recompute()
lastGeoId = len(self.Sketch001.Geometry)
self.geoList = []
self.geoList.append(
Part.LineSegment(
App.Vector(-33.953453, 7.680901, 0.000000),
App.Vector(-33.953453, 2.543239, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(-33.953453, 2.543239, 0.000000),
App.Vector(33.282925, 2.543239, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(33.282925, 2.543239, 0.000000),
App.Vector(33.282925, 7.680901, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(33.282925, 7.680901, 0.000000),
App.Vector(-33.953453, 7.680901, 0.000000),
)
)
self.Sketch001.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
self.constraintList.append(Sketcher.Constraint("Vertical", 0))
self.constraintList.append(Sketcher.Constraint("Vertical", 2))
self.constraintList.append(Sketcher.Constraint("Horizontal", 1))
self.constraintList.append(Sketcher.Constraint("Horizontal", 3))
self.Sketch001.addConstraint(self.constraintList)
del self.constraintList
self.Doc.recompute()
self.Pad001 = self.Body.newObject("PartDesign::Pad", "Pad001")
self.Pad001.Profile = (
self.Doc.getObject("Sketch001"),
[
"",
],
)
self.Pad001.Length = 10
self.Doc.recompute()
self.Pad001.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
self.Doc.recompute()
self.Pad001.UseCustomVector = 0
self.Pad001.Direction = (0, -1, 0)
self.Pad001.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
self.Pad001.AlongSketchNormal = 1
self.Pad001.Type = 2
self.Pad001.UpToFace = None
self.Pad001.Reversed = 0
self.Pad001.Midplane = 0
self.Pad001.Offset = 0
self.Doc.recompute()
self.Sketch002 = self.Body.newObject("Sketcher::SketchObject", "Sketch002")
self.Sketch002.AttachmentSupport = (
self.Doc.getObject("Pad001"),
[
"Face11",
],
)
self.Sketch002.MapMode = "FlatFace"
self.Doc.recompute()
lastGeoId = len(self.Sketch002.Geometry)
self.geoList = []
self.geoList.append(
Part.LineSegment(
App.Vector(-30.826233, 35.070259, 0.000000),
App.Vector(-30.826233, 30.602728, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(-30.826233, 30.602728, 0.000000),
App.Vector(30.602348, 30.602728, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(30.602348, 30.602728, 0.000000),
App.Vector(30.602348, 35.070259, 0.000000),
)
)
self.geoList.append(
Part.LineSegment(
App.Vector(30.602348, 35.070259, 0.000000),
App.Vector(-30.826233, 35.070259, 0.000000),
)
)
self.Sketch002.addGeometry(self.geoList, False)
del self.geoList
self.constraintList = []
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
self.constraintList.append(Sketcher.Constraint("Vertical", 0))
self.constraintList.append(Sketcher.Constraint("Vertical", 2))
self.constraintList.append(Sketcher.Constraint("Horizontal", 1))
self.constraintList.append(Sketcher.Constraint("Horizontal", 3))
self.Sketch002.addConstraint(self.constraintList)
del self.constraintList
self.Doc.recompute()
self.Pad002 = self.Body.newObject("PartDesign::Pad", "Pad002")
self.Pad002.Profile = (
self.Doc.getObject("Sketch002"),
[
"",
],
)
self.Pad002.Length = 10
self.Doc.recompute()
self.Pad002.ReferenceAxis = (self.Doc.getObject("Sketch002"), ["N_Axis"])
self.Doc.recompute()
self.Pad002.Length = 10.000000
self.Pad002.TaperAngle = 0.000000
self.Pad002.UseCustomVector = 0
self.Pad002.Direction = (0, 0, 1)
self.Pad002.ReferenceAxis = (self.Doc.getObject("Sketch002"), ["N_Axis"])
self.Pad002.AlongSketchNormal = 1
self.Pad002.Type = 0
self.Pad002.UpToFace = None
self.Pad002.Reversed = 0
self.Pad002.Midplane = 0
self.Pad002.Offset = 0
self.Doc.recompute()
self.Pad001.Type = "Length"
self.Pad001.Length = "4 mm"
self.Doc.recompute()
"""Assumption: the warning PropertyLinks.cpp(453):
PartDesignTestTNP1#Sketch002.AttachmentSupport missing element
reference PartDesignTestTNP1#Pad001 ;g815v1;SKT;:H976,V;:L#2;PSM;
:H976:9,E;:L#8;PSM;:H976:9,F;:H-977,F.Face11 is only temporary and can be ignored."""
self.assertTrue(self.Sketch002.AttachmentSupport[0][1][0] == "Face11")
self.assertGreaterEqual(self.Body.Shape.Volume, 20126)
def tearDown(self):
""" Close our test document """
App.closeDocument(self.Doc.Name)