PartGui::DlgExtrusion
0
0
300
564
Extrude
-
0
0
Direction
-
Extrude perpendicularly to plane of input shape.
Along normal
true
-
Set direction to match a direction of straight edge. Hint: to account for length of the edge too, set both lengths to zero.
Along edge:
-
If checked, direction of extrusion is reversed.
Reversed
-
-
Click to start selecting an edge in 3d view.
Select
-
Specify direction manually using X,Y,Z values.
Custom direction:
-
-
0
0
X:
-
0
0
-2147480000.000000000000000
2147480000.000000000000000
-
Y:
-
0
0
-2147480000.000000000000000
2147480000.000000000000000
-
Z:
-
0
0
false
-2147480000.000000000000000
2147480000.000000000000000
1.000000000000000
-
Length
-
Along:
-
0
0
0
0
Length to extrude along direction (can be negative).
If both lengths are zero, magnitude of direction is used.
mm
-2147480000.000000000000000
2147480000.000000000000000
10.000000000000000
-
Against:
-
0
0
0
0
Length to extrude against the direction (can be negative).
mm
-2147480000.000000000000000
2147480000.000000000000000
0.000000000000000
-
Distribute extrusion length equally to both sides.
Symmetric
-
-
Taper angle along
-
0
0
Taper (draft) angle along extrusion direction
deg
-89.999999000000003
89.999999000000003
-
Taper angle against
-
0
0
Taper (draft) angle against extrusion direction
deg
-89.999999000000003
89.999999000000003
-
If checked, extruding closed wires will give solids, not shells.
Create solid
-
Qt::Horizontal
-
0
0
Select shape(s) that should be extruded
QAbstractItemView::ExtendedSelection
20
false
Shape
-
StatusLabel
groupBox_2
chkSolid
treeWidget
statusLabel
groupBox
line
Gui::QuantitySpinBox
QWidget
rbDirModeNormal
rbDirModeEdge
chkReversed
txtLink
btnSelectEdge
rbDirModeCustom
btnX
dirX
btnY
dirY
btnZ
dirZ
spinLenFwd
spinLenRev
chkSymmetric
spinTaperAngle
spinTaperAngleRev
chkSolid
treeWidget