#   (c) Juergen Riegel (FreeCAD@juergen-riegel.net) 2011      LGPL        *
#                                                                         *
#   This file is part of the FreeCAD CAx development system.              *
#                                                                         *
#   This program is free software; you can redistribute it and/or modify  *
#   it under the terms of the GNU Lesser General Public License (LGPL)    *
#   as published by the Free Software Foundation; either version 2 of     *
#   the License, or (at your option) any later version.                   *
#   for detail see the LICENCE text file.                                 *
#                                                                         *
#   FreeCAD is distributed in the hope that it will be useful,            *
#   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
#   GNU Library General Public License for more details.                  *
#                                                                         *
#   You should have received a copy of the GNU Library General Public     *
#   License along with FreeCAD; if not, write to the Free Software        *
#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
#   USA                                                                   *
#**************************************************************************
import unittest

import FreeCAD
import TestSketcherApp

class TestPad(unittest.TestCase):
    def setUp(self):
        self.Doc = FreeCAD.newDocument("PartDesignTestPad")

    def testBoxCase(self):
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject','SketchPad')
        TestSketcherApp.CreateSlotPlateSet(self.PadSketch)
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad","Pad")
        self.Pad.Profile = self.PadSketch
        self.Doc.recompute()
        self.assertEqual(len(self.Pad.Shape.Faces), 6)
        
    def testSketchOnPlane(self):
        self.Body = self.Doc.addObject('PartDesign::Body','Body')
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject','SketchPad')
        self.PadSketch.Support = (self.Doc.XY_Plane, [''])
        self.PadSketch.MapMode = 'FlatFace'
        self.Body.addObject(self.PadSketch)
        TestSketcherApp.CreateSlotPlateSet(self.PadSketch)
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad","Pad")
        self.Pad.Profile = self.PadSketch
        self.Body.addObject(self.Pad)
        self.Doc.recompute()
        self.assertEqual(len(self.Pad.Shape.Faces), 6)

    def testPadToFirstCase(self):
        self.Body = self.Doc.addObject('PartDesign::Body','Body')
        # Make first offset cube Pad
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
        self.Body.addObject(self.PadSketch)
        TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 1), (1, 1))
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
        self.Body.addObject(self.Pad)
        self.Pad.Profile = self.PadSketch
        self.Pad.Length = 1
        self.Doc.recompute()
        # Make second pad on different plane and pad to first
        self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
        self.Body.addObject(self.PadSketch1)
        self.PadSketch1.MapMode = 'FlatFace'
        self.PadSketch1.Support = (self.Doc.XZ_Plane, [''])
        self.Doc.recompute()
        TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
        self.Doc.recompute()
        self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
        self.Body.addObject(self.Pad1)
        self.Pad1.Profile = self.PadSketch1
        self.Pad1.Type = 2
        self.Pad1.Reversed = 1
        self.Doc.recompute()
        self.assertAlmostEqual(self.Pad1.Shape.Volume, 2.0)

    def testPadtoLastCase(self):
        self.Body = self.Doc.addObject('PartDesign::Body','Body')
        # Make first offset cube Pad
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
        self.Body.addObject(self.PadSketch)
        TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0.5, 1), (0.5, 2))
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
        self.Body.addObject(self.Pad)
        self.Pad.Profile = self.PadSketch
        self.Pad.Length = 1
        self.Doc.recompute()
        # Make second pad on different plane and pad to first
        self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
        self.Body.addObject(self.PadSketch1)
        self.PadSketch1.MapMode = 'FlatFace'
        self.PadSketch1.Support = (self.Doc.XZ_Plane, [''])
        self.Doc.recompute()
        TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
        self.Doc.recompute()
        self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
        self.Body.addObject(self.Pad1)
        self.Pad1.Profile = self.PadSketch1
        self.Pad1.Type = 1
        self.Pad1.Reversed = 1
        self.Doc.recompute()
        self.assertAlmostEqual(self.Pad1.Shape.Volume, 3.0)

    def testPadToFaceCase(self):
        self.Body = self.Doc.addObject('PartDesign::Body','Body')
        # Make first offset cube Pad
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
        self.Body.addObject(self.PadSketch)
        TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 1), (1, 1))
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
        self.Body.addObject(self.Pad)
        self.Pad.Profile = self.PadSketch
        self.Pad.Length = 1
        self.Doc.recompute()
        # Make second pad on different plane and pad to face on first
        self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
        self.Body.addObject(self.PadSketch1)
        self.PadSketch1.MapMode = 'FlatFace'
        self.PadSketch1.Support = (self.Doc.XZ_Plane, [''])
        self.Doc.recompute()
        TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
        self.Doc.recompute()
        self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
        self.Body.addObject(self.Pad1)
        self.Pad1.Profile = self.PadSketch1
        self.Pad1.Type = 3
        self.Pad1.UpToFace = (self.Pad, ["Face3"])
        self.Pad1.Reversed = 1
        self.Doc.recompute()
        self.assertAlmostEqual(self.Pad1.Shape.Volume, 2.0)

    def testPadTwoDimensionsCase(self):
        self.Body = self.Doc.addObject('PartDesign::Body','Body')
        # Make first offset cube Pad
        self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
        self.Body.addObject(self.PadSketch)
        TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 1), (1, 1))
        self.Doc.recompute()
        self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
        self.Body.addObject(self.Pad)
        self.Pad.Profile = self.PadSketch
        self.Pad.Length = 1
        self.Doc.recompute()
        # Make second pad on different plane and pad to face on first
        self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
        self.Body.addObject(self.PadSketch1)
        self.PadSketch1.MapMode = 'FlatFace'
        self.PadSketch1.Support = (self.Doc.XZ_Plane, [''])
        self.Doc.recompute()
        TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
        self.Doc.recompute()
        self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
        self.Body.addObject(self.Pad1)
        self.Pad1.Profile = self.PadSketch1
        self.Pad1.Type = 4
        self.Pad1.Length = 2.0
        self.Pad1.Length2 = 1.0
        self.Pad1.Reversed = 1
        self.Doc.recompute()
        self.assertAlmostEqual(self.Pad1.Shape.Volume, 4.0)

    def tearDown(self):
        #closing doc
        FreeCAD.closeDocument("PartDesignTestPad")
        #print ("omit closing document for debugging")