1934 lines
84 KiB
Python
1934 lines
84 KiB
Python
# SPDX-License-Identifier: LGPL-2.1-or-later
|
|
# ***************************************************************************
|
|
# * *
|
|
# * Copyright (c) 2024 bgbsww@gmail.com *
|
|
# * *
|
|
# * This file is part of FreeCAD. *
|
|
# * *
|
|
# * FreeCAD is free software: you can redistribute it and/or modify it *
|
|
# * under the terms of the GNU Lesser General Public License as *
|
|
# * published by the Free Software Foundation, either version 2.1 of the *
|
|
# * License, or (at your option) any later version. *
|
|
# * *
|
|
# * FreeCAD is distributed in the hope that it will be useful, but *
|
|
# * WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
|
|
# * Lesser General Public License for more details. *
|
|
# * *
|
|
# * You should have received a copy of the GNU Lesser General Public *
|
|
# * License along with FreeCAD. If not, see *
|
|
# * <https://www.gnu.org/licenses/>. *
|
|
# * *
|
|
# ***************************************************************************
|
|
|
|
""" Tests related to the Topological Naming Problem """
|
|
|
|
import math
|
|
import unittest
|
|
|
|
import FreeCAD as App
|
|
import Part
|
|
import Sketcher
|
|
import TestSketcherApp
|
|
|
|
|
|
class TestTopologicalNamingProblem(unittest.TestCase):
|
|
""" Tests related to the Topological Naming Problem """
|
|
|
|
# pylint: disable=attribute-defined-outside-init
|
|
|
|
def setUp(self):
|
|
""" Create a document for the test suite """
|
|
self.Doc = App.newDocument("PartDesignTestTNP")
|
|
|
|
def testPadsOnBaseObject(self):
|
|
""" Simple TNP test case
|
|
By creating three Pads dependent on each other in succession, and then moving the
|
|
middle one we can determine if the last one breaks because of a broken reference
|
|
to the middle one. This is the essence of a TNP. Pretty much a duplicate of the
|
|
steps at https://wiki.freecad.org/Topological_naming_problem """
|
|
|
|
# Arrange
|
|
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
|
|
self.Body.addObject(self.PadSketch)
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 0), (1, 1))
|
|
self.Doc.recompute()
|
|
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
self.Body.addObject(self.Pad)
|
|
self.Pad.Profile = self.PadSketch
|
|
self.Pad.Length = 1
|
|
self.Doc.recompute()
|
|
|
|
# Attach a second pad to the top of the first.
|
|
self.PadSketch1 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad1')
|
|
self.Body.addObject(self.PadSketch1)
|
|
self.PadSketch1.MapMode = 'FlatFace'
|
|
self.PadSketch1.AttachmentSupport = [(self.Doc.getObject('Pad'), 'Face6')]
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch1, (0, 0), (1, 1))
|
|
self.Doc.recompute()
|
|
self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
|
|
self.Body.addObject(self.Pad1)
|
|
self.Pad1.Profile = self.PadSketch1
|
|
self.Pad1.Length = 1
|
|
self.Doc.recompute()
|
|
|
|
# Attach a third pad to the top of the second.
|
|
self.PadSketch2 = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad2')
|
|
self.Body.addObject(self.PadSketch2)
|
|
self.PadSketch2.MapMode = 'FlatFace'
|
|
self.PadSketch2.AttachmentSupport = [(self.Doc.getObject('Pad1'), 'Face6')]
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch2, (0, 0), (1, 1))
|
|
self.Doc.recompute()
|
|
self.Pad2 = self.Doc.addObject("PartDesign::Pad", "Pad2")
|
|
self.Body.addObject(self.Pad2)
|
|
self.Pad2.Profile = self.PadSketch2
|
|
self.Pad2.Length = 1
|
|
self.Doc.recompute()
|
|
|
|
# Assert everything is valid
|
|
self.assertTrue(self.Pad.isValid())
|
|
self.assertTrue(self.Pad1.isValid())
|
|
self.assertTrue(self.Pad2.isValid())
|
|
|
|
# Act
|
|
# Move the second pad ( the sketch attachment point )
|
|
self.PadSketch1.AttachmentOffset = App.Placement(
|
|
App.Vector(0.5000000000, 0.0000000000, 0.0000000000),
|
|
App.Rotation(0.0000000000, 0.0000000000, 0.0000000000))
|
|
self.Doc.recompute()
|
|
|
|
# Assert everything is still valid.
|
|
self.assertTrue(self.Pad.isValid())
|
|
self.assertTrue(self.Pad1.isValid())
|
|
|
|
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
self.assertFalse(self.Pad2.isValid()) # TNP problem is present without ElementMaps
|
|
else:
|
|
self.assertTrue(self.Pad2.isValid()) # TNP problem is not present with ElementMaps
|
|
|
|
def testPartDesignElementMapSketch(self):
|
|
""" Test that creating a sketch results in a correct element map. """
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
|
|
body.addObject(sketch)
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
# Act
|
|
self.Doc.recompute()
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
reverseMap = sketch.Shape.ElementReverseMap
|
|
reverseFaces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
# Assert
|
|
self.assertEqual(sketch.Shape.ElementMapSize,12)
|
|
self.assertEqual(len(reverseMap),8)
|
|
self.assertEqual(len(reverseFaces),0)
|
|
self.assertEqual(len(edges),4)
|
|
self.assertEqual(len(vertexes),4)
|
|
|
|
def testPartDesignElementMapPad(self):
|
|
""" Test that padding a sketch results in a correct element map. Note that comprehensive testing
|
|
of the geometric functionality of the Pad is in TestPad.py """
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
padSketch = self.Doc.addObject('Sketcher::SketchObject', 'SketchPad')
|
|
pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
body.addObject(padSketch)
|
|
body.addObject(pad)
|
|
TestSketcherApp.CreateRectangleSketch(padSketch, (0, 0), (1, 1))
|
|
pad.Profile = padSketch
|
|
pad.Length = 1
|
|
# Act
|
|
self.Doc.recompute()
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
reverseMap = pad.Shape.ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
# Assert
|
|
self.assertEqual(pad.Shape.ElementMapSize,30) # 4 duplicated Vertexes in here
|
|
self.assertEqual(len(reverseMap),26)
|
|
self.assertEqual(len(faces),6)
|
|
self.assertEqual(len(edges),12)
|
|
self.assertEqual(len(vertexes),8)
|
|
|
|
def testPartDesignElementMapBox(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(box.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(box.Shape.childShapes()), 1)
|
|
self.assertEqual(box.Shape.childShapes()[0].ElementMapSize, 26)
|
|
body.addObject(box)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
|
|
|
|
def testPartDesignElementMapCylinder(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
cylinder = self.Doc.addObject('PartDesign::AdditiveCylinder', 'Cylinder')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(cylinder.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(cylinder.Shape.childShapes()), 1)
|
|
self.assertEqual(cylinder.Shape.childShapes()[0].ElementMapSize, 8)
|
|
body.addObject(cylinder)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
|
|
self.assertEqual(len(reverseMap),8)
|
|
self.assertEqual(len(faces),3)
|
|
self.assertEqual(len(edges),3)
|
|
self.assertEqual(len(vertexes),2)
|
|
|
|
def testPartDesignElementMapSphere(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sphere = self.Doc.addObject('PartDesign::AdditiveSphere', 'Sphere')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(sphere.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(sphere.Shape.childShapes()), 1)
|
|
self.assertEqual(sphere.Shape.childShapes()[0].ElementMapSize, 6)
|
|
body.addObject(sphere)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 6)
|
|
self.assertEqual(len(reverseMap),6)
|
|
self.assertEqual(len(faces),1)
|
|
self.assertEqual(len(edges),3)
|
|
self.assertEqual(len(vertexes),2)
|
|
|
|
def testPartDesignElementMapCone(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
cone = self.Doc.addObject('PartDesign::AdditiveCone', 'Cone')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(cone.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(cone.Shape.childShapes()), 1)
|
|
self.assertEqual(cone.Shape.childShapes()[0].ElementMapSize, 8)
|
|
body.addObject(cone)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
|
|
self.assertEqual(len(reverseMap),8)
|
|
self.assertEqual(len(faces),3)
|
|
self.assertEqual(len(edges),3)
|
|
self.assertEqual(len(vertexes),2)
|
|
|
|
def testPartDesignElementMapEllipsoid(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
ellipsoid = self.Doc.addObject('PartDesign::AdditiveEllipsoid', 'Ellipsoid')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(ellipsoid.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(ellipsoid.Shape.childShapes()), 1)
|
|
self.assertEqual(ellipsoid.Shape.childShapes()[0].ElementMapSize, 6)
|
|
body.addObject(ellipsoid)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 6)
|
|
self.assertEqual(len(reverseMap),6)
|
|
self.assertEqual(len(faces),1)
|
|
self.assertEqual(len(edges),3)
|
|
self.assertEqual(len(vertexes),2)
|
|
|
|
def testPartDesignElementMapTorus(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
torus = self.Doc.addObject('PartDesign::AdditiveTorus', 'Torus')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(torus.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(torus.Shape.childShapes()), 1)
|
|
self.assertEqual(torus.Shape.childShapes()[0].ElementMapSize, 4)
|
|
body.addObject(torus)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 4)
|
|
self.assertEqual(len(reverseMap),4)
|
|
self.assertEqual(len(faces),1)
|
|
self.assertEqual(len(edges),2)
|
|
self.assertEqual(len(vertexes),1)
|
|
|
|
def testPartDesignElementMapPrism(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
prism = self.Doc.addObject('PartDesign::AdditivePrism', 'Prism')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(prism.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(prism.Shape.childShapes()), 1)
|
|
self.assertEqual(prism.Shape.childShapes()[0].ElementMapSize, 38)
|
|
body.addObject(prism)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
|
|
self.assertEqual(len(reverseMap),38)
|
|
self.assertEqual(len(faces),8)
|
|
self.assertEqual(len(edges),18)
|
|
self.assertEqual(len(vertexes),12)
|
|
|
|
def testPartDesignElementMapWedge(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
wedge = self.Doc.addObject('PartDesign::AdditiveWedge', 'Wedge')
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act / Assert
|
|
self.assertEqual(len(wedge.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(wedge.Shape.childShapes()), 1)
|
|
self.assertEqual(wedge.Shape.childShapes()[0].ElementMapSize, 26)
|
|
body.addObject(wedge)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
|
|
self.assertEqual(len(reverseMap),26)
|
|
self.assertEqual(len(faces),6)
|
|
self.assertEqual(len(edges),12)
|
|
self.assertEqual(len(vertexes),8)
|
|
|
|
# body.BaseFeature = box
|
|
|
|
def testPartDesignElementMapSubBox(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subbox = self.Doc.addObject('PartDesign::SubtractiveBox', 'Box')
|
|
subbox.BaseFeature = box
|
|
body.addObject(subbox)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 44)
|
|
|
|
def testPartDesignElementMapSubCylinder(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subcylinder = self.Doc.addObject('PartDesign::SubtractiveCylinder', 'Cylinder')
|
|
subcylinder.BaseFeature = box
|
|
body.addObject(subcylinder)
|
|
# Assert
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
|
|
|
|
def testPartDesignElementMapSubSphere(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subsphere = self.Doc.addObject('PartDesign::SubtractiveSphere', 'Sphere')
|
|
subsphere.BaseFeature = box
|
|
body.addObject(subsphere)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 33)
|
|
|
|
def testPartDesignElementMapSubCone(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subcone = self.Doc.addObject('PartDesign::SubtractiveCone', 'Cone')
|
|
subcone.BaseFeature = box
|
|
body.addObject(subcone)
|
|
# Assert
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
|
|
|
|
def testPartDesignElementMapSubEllipsoid(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subellipsoid = self.Doc.addObject('PartDesign::SubtractiveEllipsoid', 'Ellipsoid')
|
|
subellipsoid.BaseFeature = box
|
|
body.addObject(subellipsoid)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 33)
|
|
|
|
def testPartDesignElementMapSubTorus(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subtorus = self.Doc.addObject('PartDesign::SubtractiveTorus', 'Torus')
|
|
subtorus.BaseFeature = box
|
|
body.addObject(subtorus)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 38)
|
|
|
|
def testPartDesignElementMapSubPrism(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subprism = self.Doc.addObject('PartDesign::SubtractivePrism', 'Prism')
|
|
subprism.BaseFeature = box
|
|
body.addObject(subprism)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 44)
|
|
|
|
def testPartDesignElementMapSubWedge(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
box.Length = 20
|
|
box.Width = 20
|
|
box.Height = 20
|
|
body.addObject(box)
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
subwedge = self.Doc.addObject('PartDesign::SubtractiveWedge', 'Wedge')
|
|
subwedge.BaseFeature = box
|
|
body.addObject(subwedge)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 50)
|
|
|
|
def testPartDesignElementMapSketch(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
|
|
pad.Profile = sketch
|
|
body.addObject(sketch)
|
|
body.addObject(pad)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
# self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 30)
|
|
self.assertEqual(body.Shape.ElementMapSize,30)
|
|
self.assertEqual(sketch.Shape.ElementMapSize,12)
|
|
self.assertEqual(pad.Shape.ElementMapSize,30)
|
|
# Todo: Assert that the names in the ElementMap are good;
|
|
# in particular that they are hashed with a # starting
|
|
|
|
def testPartDesignElementMapRevolution(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
revolution = self.Doc.addObject('PartDesign::Revolution', 'Revolution')
|
|
revolution.ReferenceAxis = (self.Doc.getObject('Sketch'),['V_Axis'])
|
|
revolution.Profile = sketch # Causing segfault
|
|
body.addObject(sketch)
|
|
body.addObject(revolution)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 8)
|
|
|
|
def testPartDesignElementMapLoft(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
sketch2 = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch2, (0, 0), (2, 2))
|
|
sketch2.Placement.move(App.Vector(0, 0, 3))
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
loft = self.Doc.addObject('PartDesign::AdditiveLoft', 'Loft')
|
|
loft.Profile = sketch
|
|
loft.Sections = [sketch2]
|
|
body.addObject(sketch)
|
|
body.addObject(sketch2)
|
|
body.addObject(loft)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 30)
|
|
|
|
def testPartDesignElementMapPipe(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
sketch2 = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch2, (0, 0), (2, 2))
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
pipe = self.Doc.addObject('PartDesign::AdditivePipe', 'Pipe')
|
|
pipe.Profile = sketch
|
|
pipe.Spine = sketch2
|
|
body.addObject(sketch)
|
|
body.addObject(sketch2)
|
|
body.addObject(pipe)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 64)
|
|
|
|
def testPartDesignElementMapHelix(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Act
|
|
helix = self.Doc.addObject('PartDesign::AdditiveHelix', 'Helix')
|
|
helix.Profile = sketch
|
|
helix.ReferenceAxis = (self.Doc.getObject('Sketch'),['V_Axis'])
|
|
body.addObject(sketch)
|
|
body.addObject(helix)
|
|
self.Doc.recompute()
|
|
# Assert
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
# The next size can vary based on tOCCT version (26 or 30), so we accept having entries.
|
|
self.assertGreaterEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
|
|
|
|
def testPartDesignElementMapPocket(self):
|
|
pass # TODO
|
|
|
|
def testPartDesignElementMapHole(self):
|
|
pass # TODO
|
|
|
|
def testPartDesignElementMapGroove(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
body.addObject(box)
|
|
|
|
groove = self.Doc.addObject('PartDesign::Groove', 'Groove')
|
|
body.addObject(groove)
|
|
groove.ReferenceAxis = (self.Doc.getObject('Y_Axis'), [''])
|
|
groove.Angle = 360.0
|
|
groove.Profile = (box, ['Face6'])
|
|
groove.ReferenceAxis = (box, ['Edge9'])
|
|
groove.Midplane = 0
|
|
groove.Reversed = 0
|
|
groove.Base = App.Vector(0, 0, 0)
|
|
self.Doc.recompute()
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Assert
|
|
# print(groove.Shape.childShapes()[0].ElementMap)
|
|
# TODO: Complete me as part of the subtractive features
|
|
|
|
def testPartDesignElementMapSubLoft(self):
|
|
pass # TODO
|
|
|
|
def testPartDesignElementMapSubPipe(self):
|
|
pass # TODO
|
|
|
|
def testPartDesignElementMapSubHelix(self):
|
|
pass # TODO
|
|
|
|
def testPartDesignElementMapChamfer(self):
|
|
""" Test Chamfer ( and FeatureDressup )"""
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
chamfer = self.Doc.addObject('PartDesign::Chamfer', 'Chamfer')
|
|
chamfer.Base = (box, ['Edge1',
|
|
'Edge2',
|
|
'Edge3',
|
|
'Edge4',
|
|
'Edge5',
|
|
'Edge6',
|
|
'Edge7',
|
|
'Edge8',
|
|
'Edge9',
|
|
'Edge10',
|
|
'Edge11',
|
|
'Edge12',
|
|
])
|
|
chamfer.Size = 1
|
|
chamfer.UseAllEdges = True
|
|
# Act / Assert
|
|
body.addObject(box)
|
|
body.addObject(chamfer)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 98)
|
|
self.assertEqual(len(reverseMap),98)
|
|
self.assertEqual(len(faces),26) # 6 Faces become 26 ( +8 + 2*6 )
|
|
self.assertEqual(len(edges),48) # 12 Edges become 48
|
|
self.assertEqual(len(vertexes),24) # 8 Vertices become 24
|
|
|
|
def testPartDesignElementMapFillet(self):
|
|
""" Test Fillet ( and FeatureDressup )"""
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
fillet = self.Doc.addObject('PartDesign::Fillet', 'Fillet')
|
|
fillet.Base = (box, ['Edge1',
|
|
'Edge2',
|
|
'Edge3',
|
|
'Edge4',
|
|
'Edge5',
|
|
'Edge6',
|
|
'Edge7',
|
|
'Edge8',
|
|
'Edge9',
|
|
'Edge10',
|
|
'Edge11',
|
|
'Edge12',
|
|
])
|
|
# Act / Assert
|
|
body.addObject(box)
|
|
body.addObject(fillet)
|
|
self.Doc.recompute()
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 106)
|
|
self.assertEqual(len(reverseMap),106)
|
|
self.assertEqual(len(faces),26) # 6 Faces become 26 ( +8 + 2*6 )
|
|
self.assertEqual(len(edges),56) # 12 Edges become 56 Why?
|
|
self.assertEqual(len(vertexes),24) # 8 Vertices become 24
|
|
|
|
def testPartDesignElementMapTransform(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
multitransform = self.Doc.addObject('PartDesign::MultiTransform', 'MultiTransform')
|
|
scaled = self.Doc.addObject('PartDesign::Scaled', 'Scaled')
|
|
scaled.Factor = 2
|
|
scaled.Occurrences = 2
|
|
multitransform.Transformations = scaled
|
|
multitransform.Shape = box.Shape
|
|
|
|
# Act / Assert
|
|
self.Doc.recompute()
|
|
body.addObject(box)
|
|
body.addObject(multitransform)
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 26)
|
|
|
|
def testPartDesignElementMapShapeBinder(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
shapebinder = self.Doc.addObject('PartDesign::ShapeBinder', 'ShapeBinder')
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
# Act / Assert
|
|
body.addObject(box)
|
|
body.addObject(shapebinder)
|
|
shapebinder.Support = [box]
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(shapebinder.Shape.childShapes()), 1)
|
|
self.assertEqual(shapebinder.Shape.childShapes()[0].ElementMapSize, 26)
|
|
|
|
def testPartDesignElementMapSubShapeBinder(self):
|
|
# Arrange
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
subshapebinder = self.Doc.addObject('PartDesign::SubShapeBinder', 'SubShapeBinder')
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
# Act / Assert
|
|
body.addObject(box)
|
|
body.addObject(subshapebinder)
|
|
subshapebinder.Support = [ (box, ["Face1"]) ]
|
|
self.assertEqual(len(body.Shape.childShapes()), 0)
|
|
self.Doc.recompute()
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(subshapebinder.Shape.childShapes()[0].ElementMapSize, 9)
|
|
|
|
def testSketchElementMap(self):
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
sketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
TestSketcherApp.CreateRectangleSketch(sketch, (0, 0), (1, 1))
|
|
body.addObject(sketch)
|
|
self.Doc.recompute()
|
|
self.assertEqual(sketch.Shape.ElementMapSize, 12)
|
|
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
|
|
pad.Profile = sketch
|
|
body.addObject(pad)
|
|
self.Doc.recompute()
|
|
if body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Assert
|
|
self.assertEqual(sketch.Shape.ElementMapSize, 12)
|
|
self.assertEqual(pad.Shape.ElementMapSize, 30) # The sketch plus the pad in the map
|
|
# TODO: differing results between main and LS3 on these values. Does it matter?
|
|
# self.assertEqual(body.Shape.ElementMapSize,0) # 8?
|
|
# self.assertEqual(body.Shape.ElementMapSize,30) # 26
|
|
|
|
def testPlaneElementMap(self):
|
|
plane = self.Doc.addObject("Part::Plane", "Plane")
|
|
plane.Length = 10
|
|
plane.Width = 10
|
|
self.Doc.recompute()
|
|
self.assertEqual(plane.Shape.ElementMapSize, 0)
|
|
pad = self.Doc.addObject('PartDesign::Pad', 'Pad')
|
|
pad.Profile = plane
|
|
self.Doc.recompute()
|
|
if pad.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
# Assert
|
|
self.assertEqual(plane.Shape.ElementMapSize, 0)
|
|
self.assertEqual(pad.Shape.ElementMapSize, 26)
|
|
|
|
def testChangeSketch(self):
|
|
# Arrange
|
|
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
self.Body.addObject(self.PadSketch)
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 0), (31.37, 25.2))
|
|
self.Doc.recompute()
|
|
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
self.Body.addObject(self.Pad)
|
|
self.Pad.Profile = self.PadSketch
|
|
self.Pad.Length = 10
|
|
self.Doc.recompute()
|
|
|
|
self.Sketch001 = self.Body.newObject('Sketcher::SketchObject','Sketch001')
|
|
self.Sketch001.AttachmentSupport = (self.Doc.getObject('Pad'),['Face6',])
|
|
self.Sketch001.MapMode = 'FlatFace'
|
|
App.ActiveDocument.recompute()
|
|
|
|
self.Sketch001.addExternal("Pad","Edge10")
|
|
self.Sketch001.addExternal("Pad","Edge7")
|
|
|
|
geoList = []
|
|
geoList.append(Part.Circle(App.Vector(15.093666, 13.036922, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000), 5.000000))
|
|
self.Sketch001.addGeometry(geoList,False)
|
|
del geoList
|
|
self.Sketch001.addConstraint(Sketcher.Constraint('Radius',0,5.000000))
|
|
self.Sketch001.addConstraint(Sketcher.Constraint('Symmetric',-3,2,-4,1,0,3))
|
|
App.ActiveDocument.recompute()
|
|
self.Doc.recompute()
|
|
|
|
self.Pad001 = self.Body.newObject('PartDesign::Pad','Pad001')
|
|
self.Pad001.Profile = self.Doc.getObject('Sketch001')
|
|
self.Pad001.Length = 10
|
|
App.ActiveDocument.recompute()
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject('Sketch001'),['N_Axis'])
|
|
self.Sketch001.Visibility = False
|
|
App.ActiveDocument.recompute()
|
|
|
|
self.Pad001.Length = 10.000000
|
|
self.Pad001.TaperAngle = 0.000000
|
|
self.Pad001.UseCustomVector = 0
|
|
self.Pad001.Direction = (0, 0, 1)
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject('Sketch001'), ['N_Axis'])
|
|
self.Pad001.AlongSketchNormal = 1
|
|
self.Pad001.Type = 0
|
|
self.Pad001.UpToFace = None
|
|
self.Pad001.Reversed = 0
|
|
self.Pad001.Midplane = 0
|
|
self.Pad001.Offset = 0
|
|
self.Doc.recompute()
|
|
self.Doc.getObject('Pad').Visibility = False
|
|
|
|
self.Doc.getObject('Sketch001').Visibility = False
|
|
|
|
# Modify the original sketch to generate TNP issue
|
|
geoList = []
|
|
geoList.append(Part.LineSegment(App.Vector(2.510468, 22.837425, 0.000000),
|
|
App.Vector(2.510468, 19.933617, 0.000000)))
|
|
geoList.append(Part.LineSegment(App.Vector(2.510468, 19.933617, 0.000000),
|
|
App.Vector(4.869811, 19.933617, 0.000000)))
|
|
geoList.append(Part.LineSegment(App.Vector(4.869811, 19.933617, 0.000000),
|
|
App.Vector(4.869811, 22.837425, 0.000000)))
|
|
geoList.append(Part.LineSegment(App.Vector(4.869811, 22.837425, 0.000000),
|
|
App.Vector(2.510468, 22.837425, 0.000000)))
|
|
self.PadSketch.addGeometry(geoList,False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 4))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 6))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 5))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 7))
|
|
self.PadSketch.addConstraint(constraintList)
|
|
del constraintList
|
|
self.Doc.recompute()
|
|
# Assert
|
|
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMax,31.37)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMax,25.2)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMax,20)
|
|
|
|
def testApplyFillet(self):
|
|
# Arrange
|
|
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Doc.addObject('Sketcher::SketchObject', 'Sketch')
|
|
self.Body.addObject(self.PadSketch)
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (0, 0), (31.37, 25.2))
|
|
self.Doc.recompute()
|
|
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
self.Body.addObject(self.Pad)
|
|
self.Pad.Profile = self.PadSketch
|
|
self.Pad.Length = 10
|
|
self.Doc.recompute()
|
|
|
|
self.Sketch001 = self.Body.newObject('Sketcher::SketchObject','Sketch001')
|
|
self.Sketch001.AttachmentSupport = (self.Doc.getObject('Pad'),['Face6',])
|
|
self.Sketch001.MapMode = 'FlatFace'
|
|
App.ActiveDocument.recompute()
|
|
|
|
self.Sketch001.addExternal("Pad","Edge10")
|
|
self.Sketch001.addExternal("Pad","Edge7")
|
|
|
|
geoList = []
|
|
geoList.append(Part.Circle(App.Vector(15.093666, 13.036922, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000), 5.000000))
|
|
self.Sketch001.addGeometry(geoList,False)
|
|
del geoList
|
|
self.Sketch001.addConstraint(Sketcher.Constraint('Radius',0,5.000000))
|
|
self.Sketch001.addConstraint(Sketcher.Constraint('Symmetric',-3,2,-4,1,0,3))
|
|
App.ActiveDocument.recompute()
|
|
self.Doc.recompute()
|
|
|
|
self.Pad001 = self.Body.newObject('PartDesign::Pad','Pad001')
|
|
self.Pad001.Profile = self.Doc.getObject('Sketch001')
|
|
self.Pad001.Length = 10
|
|
App.ActiveDocument.recompute()
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject('Sketch001'),['N_Axis'])
|
|
self.Sketch001.Visibility = False
|
|
App.ActiveDocument.recompute()
|
|
|
|
self.Pad001.Length = 10.000000
|
|
self.Pad001.TaperAngle = 0.000000
|
|
self.Pad001.UseCustomVector = 0
|
|
self.Pad001.Direction = (0, 0, 1)
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject('Sketch001'), ['N_Axis'])
|
|
self.Pad001.AlongSketchNormal = 1
|
|
self.Pad001.Type = 0
|
|
self.Pad001.UpToFace = None
|
|
self.Pad001.Reversed = 0
|
|
self.Pad001.Midplane = 0
|
|
self.Pad001.Offset = 0
|
|
self.Doc.recompute()
|
|
self.Doc.getObject('Pad').Visibility = False
|
|
|
|
self.Doc.getObject('Sketch001').Visibility = False
|
|
|
|
area1 = self.Pad.Shape.Area
|
|
# Act
|
|
self.Doc.getObject('Sketch').fillet(2,3,
|
|
App.Vector(6.673934,25.000000,0),
|
|
App.Vector(0.000000,21.980343,0),
|
|
4.740471,True,True,False)
|
|
self.Doc.recompute()
|
|
area2 = self.Pad.Shape.Area
|
|
|
|
# Assert
|
|
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMin,0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMax,31.37)
|
|
self.assertAlmostEqual(self.Body.Shape.BoundBox.YMax,25.2)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMax,20)
|
|
self.assertNotEqual(area1, area2)
|
|
|
|
def testShapeBinder(self):
|
|
doc = self.Doc
|
|
self.Body = doc.addObject('PartDesign::Body', 'TNP_Test_Body_SubShape')
|
|
doc.getObject('TNP_Test_Body_SubShape').Label = 'TNP_Test_Body_SubShape'
|
|
|
|
doc.recompute()
|
|
doc.getObject('TNP_Test_Body_SubShape').newObject('Sketcher::SketchObject', 'Sketch')
|
|
doc.Sketch.AttachmentSupport = (doc.getObject('XY_Plane'), [''])
|
|
doc.Sketch.MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(0.000000, 0.000000, 0.000000),
|
|
App.Vector(35.000000, 0.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(35.000000, 0.000000, 0.000000),
|
|
App.Vector(35.000000, 25.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(35.000000, 25.000000, 0.000000),
|
|
App.Vector(0.000000, 25.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(0.000000, 25.000000, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 0.000000)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 0))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 2))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 3))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 1, 1, 3, 2, 35.000000))
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 0, 1, 2, 2, 25.000000))
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Coincident', 0, 1, -1, 1))
|
|
|
|
doc.recompute()
|
|
|
|
doc.getObject('TNP_Test_Body_SubShape').newObject('PartDesign::Pad', 'Pad')
|
|
doc.Pad.Profile = doc.Sketch
|
|
doc.Pad.Length = 10
|
|
doc.recompute()
|
|
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
|
|
doc.Sketch.Visibility = False
|
|
doc.recompute()
|
|
doc.Pad.Length = 10.000000
|
|
doc.Pad.TaperAngle = 0.000000
|
|
doc.Pad.UseCustomVector = 0
|
|
doc.Pad.Direction = (0, 0, 1)
|
|
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
|
|
doc.Pad.AlongSketchNormal = 1
|
|
doc.Pad.Type = 0
|
|
doc.Pad.UpToFace = None
|
|
doc.Pad.Reversed = 0
|
|
doc.Pad.Midplane = 0
|
|
doc.Pad.Offset = 0
|
|
doc.recompute()
|
|
doc.Sketch.Visibility = False
|
|
|
|
doc.addObject('PartDesign::Body', 'TNP_Test_Body_Second')
|
|
doc.getObject('TNP_Test_Body_Second').Label = 'TNP_Test_Body_Second'
|
|
doc.recompute()
|
|
obj = doc.getObject('TNP_Test_Body_Second').newObject('PartDesign::ShapeBinder',
|
|
'ShapeBinder')
|
|
obj.Support = (doc.getObject("TNP_Test_Body_SubShape"), [u'Face6'])
|
|
doc.recompute()
|
|
doc.getObject('TNP_Test_Body_Second').newObject('Sketcher::SketchObject', 'Sketch001')
|
|
doc.getObject('Sketch001').AttachmentSupport = (doc.getObject('ShapeBinder'), [''])
|
|
doc.getObject('Sketch001').MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.Circle(App.Vector(14.725412, 16.666899, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000), 2.162720))
|
|
doc.getObject('Sketch001').addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
doc.recompute()
|
|
doc.getObject('TNP_Test_Body_Second').newObject('PartDesign::Pad', 'Pad001')
|
|
doc.getObject('Pad001').Profile = doc.getObject('Sketch001')
|
|
doc.getObject('Pad001').Length = 10
|
|
doc.recompute()
|
|
doc.getObject('Pad001').ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
|
|
doc.getObject('Sketch001').Visibility = False
|
|
doc.recompute()
|
|
doc.getObject('Pad001').Length = 10.000000
|
|
doc.getObject('Pad001').TaperAngle = 0.000000
|
|
doc.getObject('Pad001').UseCustomVector = 0
|
|
doc.getObject('Pad001').Direction = (0, 0, 1)
|
|
doc.getObject('Pad001').ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
|
|
doc.getObject('Pad001').AlongSketchNormal = 1
|
|
doc.getObject('Pad001').Type = 0
|
|
doc.getObject('Pad001').UpToFace = None
|
|
doc.getObject('Pad001').Reversed = 0
|
|
doc.getObject('Pad001').Midplane = 0
|
|
doc.getObject('Pad001').Offset = 0
|
|
doc.recompute()
|
|
doc.getObject('ShapeBinder').Visibility = False
|
|
doc.getObject('Sketch001').Visibility = False
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(28.380075, 21.486303, 0.000000),
|
|
App.Vector(28.380075, 15.462212, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(28.380075, 15.462212, 0.000000),
|
|
App.Vector(32.797741, 15.462212, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(32.797741, 15.462212, 0.000000),
|
|
App.Vector(32.797741, 21.486303, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(32.797741, 21.486303, 0.000000),
|
|
App.Vector(28.380075, 21.486303, 0.000000)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 4))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 6))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 5))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 7))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
|
|
doc.recompute()
|
|
# Assert
|
|
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMax, 35)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMax, 25)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMax, 10)
|
|
|
|
def testSubShapeBinder(self):
|
|
doc = self.Doc
|
|
self.Body = doc.addObject('PartDesign::Body', 'Body')
|
|
doc.Body.Label = 'Body'
|
|
doc.recompute()
|
|
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
|
|
doc.Sketch.AttachmentSupport = (doc.getObject('XY_Plane'), [''])
|
|
doc.Sketch.MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(0.000000, 0.000000, 0.000000),
|
|
App.Vector(35.000000, 0.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(35.000000, 0.000000, 0.000000),
|
|
App.Vector(35.000000, 25.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(35.000000, 25.000000, 0.000000),
|
|
App.Vector(0.000000, 25.000000, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(0.000000, 25.000000, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 0.000000)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 0))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 2))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 3))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 1, 1, 3, 2, 35.000000))
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Distance', 0, 1, 2, 2, 25.000000))
|
|
doc.Sketch.addConstraint(Sketcher.Constraint('Coincident', 0, 1, -1, 1))
|
|
|
|
doc.recompute()
|
|
doc.Body.newObject('PartDesign::Pad', 'Pad')
|
|
doc.Pad.Profile = doc.Sketch
|
|
doc.Pad.Length = 10
|
|
doc.recompute()
|
|
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
|
|
doc.Sketch.Visibility = False
|
|
doc.Pad.Length = 10.000000
|
|
doc.Pad.TaperAngle = 0.000000
|
|
doc.Pad.UseCustomVector = 0
|
|
doc.Pad.Direction = (0, 0, 1)
|
|
doc.Pad.ReferenceAxis = (doc.Sketch, ['N_Axis'])
|
|
doc.Pad.AlongSketchNormal = 1
|
|
doc.Pad.Type = 0
|
|
doc.Pad.UpToFace = None
|
|
doc.Pad.Reversed = 0
|
|
doc.Pad.Midplane = 0
|
|
doc.Pad.Offset = 0
|
|
doc.recompute()
|
|
doc.Sketch.Visibility = False
|
|
doc.addObject('PartDesign::Body', 'Body001')
|
|
doc.getObject('Body001').Label = 'Body'
|
|
doc.recompute()
|
|
binder = doc.getObject('Body001').newObject('PartDesign::SubShapeBinder', 'Binder')
|
|
binder.Support = self.Body
|
|
doc.getObject('Body001').newObject('Sketcher::SketchObject', 'Sketch001')
|
|
doc.getObject('Sketch001').AttachmentSupport = (doc.getObject('Binder'), ['Face6', ])
|
|
doc.getObject('Sketch001').MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.Circle(App.Vector(16.566162, 13.537925, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000), 2.197371))
|
|
doc.getObject('Sketch001').addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
doc.recompute()
|
|
### Begin command PartDesign_Pad
|
|
doc.getObject('Body001').newObject('PartDesign::Pad', 'Pad001')
|
|
doc.Pad001.Profile = doc.getObject('Sketch001')
|
|
doc.Pad001.Length = 10
|
|
doc.recompute()
|
|
doc.Pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
|
|
doc.getObject('Sketch001').Visibility = False
|
|
doc.recompute()
|
|
doc.Pad001.Length = 10.000000
|
|
doc.Pad001.TaperAngle = 0.000000
|
|
doc.Pad001.UseCustomVector = 0
|
|
doc.Pad001.Direction = (0, 0, 1)
|
|
doc.Pad001.ReferenceAxis = (doc.getObject('Sketch001'), ['N_Axis'])
|
|
doc.Pad001.AlongSketchNormal = 1
|
|
doc.Pad001.Type = 0
|
|
doc.Pad001.UpToFace = None
|
|
doc.Pad001.Reversed = 0
|
|
doc.Pad001.Midplane = 0
|
|
doc.Pad001.Offset = 0
|
|
doc.recompute()
|
|
doc.getObject('Binder').Visibility = False
|
|
doc.getObject('Sketch001').Visibility = False
|
|
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(30.009926, 21.026653, 0.000000),
|
|
App.Vector(30.009926, 16.425089, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(30.009926, 16.425089, 0.000000),
|
|
App.Vector(31.994911, 16.425089, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(31.994911, 16.425089, 0.000000),
|
|
App.Vector(31.994911, 21.026653, 0.000000)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(31.994911, 21.026653, 0.000000),
|
|
App.Vector(30.009926, 21.026653, 0.000000)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 4, 2, 5, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 5, 2, 6, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 6, 2, 7, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 7, 2, 4, 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 4))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 6))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 5))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 7))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
|
|
doc.recompute()
|
|
# Assert
|
|
if self.Body.Shape.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
return
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMin, 0)
|
|
self.assertEqual(self.Body.Shape.BoundBox.XMax, 35)
|
|
self.assertEqual(self.Body.Shape.BoundBox.YMax, 25)
|
|
self.assertEqual(self.Body.Shape.BoundBox.ZMax, 10)
|
|
|
|
def testPartDesignTNPChamfer(self):
|
|
""" Test Chamfer """
|
|
# Arrange
|
|
doc = self.Doc
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
body.addObject(box)
|
|
self.Doc.recompute()
|
|
volume1 = body.Shape.Volume
|
|
chamfer = self.Doc.addObject('PartDesign::Chamfer', 'Chamfer')
|
|
chamfer.Base = (box, ['Edge1',
|
|
'Edge5',
|
|
'Edge7',
|
|
])
|
|
chamfer.Size = 1
|
|
body.addObject(chamfer)
|
|
self.Doc.recompute()
|
|
volume2 = body.Shape.Volume
|
|
|
|
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
|
|
doc.Sketch.AttachmentSupport = (chamfer, "Face8")
|
|
doc.Sketch.MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
x1, x2, y1, y2 = 10 / math.sqrt(2) - math.sqrt(2), 10 / math.sqrt(2) + math.sqrt(2), 6, 11
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x1, y1, 0.0 ),
|
|
App.Vector(x1, y2, 0.0 )))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x1, y2, 0.0),
|
|
App.Vector(x2, y2, 0.0)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x2, y2, 0.0),
|
|
App.Vector(x2, y1, 0.0)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x2, y1, 0.0),
|
|
App.Vector(x1, y1, 0.0)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 0))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 2))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 3))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
body.addObject(doc.Sketch)
|
|
|
|
pocket = self.Doc.addObject('PartDesign::Pocket', 'Pocket')
|
|
pocket.Type = "Length"
|
|
pocket.Length = 3
|
|
pocket.Direction = App.Vector(-0.710000000,0.7100000000, 0.0000000000)
|
|
pocket.Profile = doc.Sketch
|
|
body.addObject(pocket)
|
|
self.Doc.recompute()
|
|
volume3 = body.Shape.Volume
|
|
# Change the chamfered edges, potentially triggering TNP
|
|
chamfer.Base = (box, ['Edge5',
|
|
'Edge7',
|
|
])
|
|
self.Doc.recompute()
|
|
volume4 = body.Shape.Volume
|
|
# Assert
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 62)
|
|
self.assertEqual(len(reverseMap),62)
|
|
self.assertEqual(len(faces),12)
|
|
self.assertEqual(len(edges),30)
|
|
self.assertEqual(len(vertexes),20)
|
|
boxVolume = 10 * 10 * 10
|
|
chamferVolume = 1 * 1 * 0.5 * 10
|
|
# cut area is rectangle with sqrt(2) as one side minus 2 isosceles right triangles
|
|
cutArea = (2 * math.sqrt(2)) * 3 - ((math.sqrt(2)/2 * math.sqrt(2)/2)/2)*2
|
|
cutVolume = cutArea * 4 # height is 4 ( 11-6 with a limit of 10 from the box )
|
|
self.assertAlmostEqual(volume1, boxVolume )
|
|
self.assertAlmostEqual(volume2, boxVolume - 3 * chamferVolume)
|
|
self.assertAlmostEqual(volume3, boxVolume - 3 * chamferVolume - cutVolume, 4)
|
|
self.assertAlmostEqual(volume4, boxVolume - 2 * chamferVolume - cutVolume, 4)
|
|
|
|
def testPartDesignTNPFillet(self):
|
|
""" Test Fillet """
|
|
# Arrange
|
|
doc = self.Doc
|
|
body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
box = self.Doc.addObject('PartDesign::AdditiveBox', 'Box')
|
|
body.addObject(box)
|
|
self.Doc.recompute()
|
|
volume1 = body.Shape.Volume
|
|
fillet = self.Doc.addObject('PartDesign::Fillet', 'Fillet')
|
|
fillet.Base = (box, ['Edge1',
|
|
'Edge5',
|
|
'Edge7',
|
|
])
|
|
# fillet.Size = 1
|
|
body.addObject(fillet)
|
|
self.Doc.recompute()
|
|
volume2 = body.Shape.Volume
|
|
|
|
doc.Body.newObject('Sketcher::SketchObject', 'Sketch')
|
|
doc.Sketch.AttachmentSupport = (fillet, "Face2")
|
|
doc.Sketch.MapMode = 'FlatFace'
|
|
doc.recompute()
|
|
|
|
x1, x2, y1, y2 = 4,6 , 6, 11
|
|
geoList = []
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x1, y1, 0.0 ),
|
|
App.Vector(x1, y2, 0.0 )))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x1, y2, 0.0),
|
|
App.Vector(x2, y2, 0.0)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x2, y2, 0.0),
|
|
App.Vector(x2, y1, 0.0)))
|
|
geoList.append(
|
|
Part.LineSegment(App.Vector(x2, y1, 0.0),
|
|
App.Vector(x1, y1, 0.0)))
|
|
doc.Sketch.addGeometry(geoList, False)
|
|
del geoList
|
|
|
|
constraintList = []
|
|
constraintList.append(Sketcher.Constraint('Coincident', 0, 2, 1, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 1, 2, 2, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 2, 2, 3, 1))
|
|
constraintList.append(Sketcher.Constraint('Coincident', 3, 2, 0, 1))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 0))
|
|
constraintList.append(Sketcher.Constraint('Horizontal', 2))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 1))
|
|
constraintList.append(Sketcher.Constraint('Vertical', 3))
|
|
doc.Sketch.addConstraint(constraintList)
|
|
del constraintList
|
|
body.addObject(doc.Sketch)
|
|
|
|
pocket = self.Doc.addObject('PartDesign::Pocket', 'Pocket')
|
|
pocket.Type = "Length"
|
|
pocket.Length = 3
|
|
pocket.Direction = App.Vector(-0.710000000,0.7100000000, 0.0000000000)
|
|
pocket.Profile = doc.Sketch
|
|
# pocket.Reversed = False
|
|
body.addObject(pocket)
|
|
self.Doc.recompute()
|
|
volume3 = body.Shape.Volume
|
|
# Change the filleted edges, potentially triggering TNP
|
|
fillet.Base = (box, ['Edge5',
|
|
'Edge7',
|
|
])
|
|
self.Doc.recompute()
|
|
volume4 = body.Shape.Volume
|
|
# Assert
|
|
if body.Shape.ElementMapVersion == "": # Skip without element maps.
|
|
return
|
|
reverseMap = body.Shape.childShapes()[0].ElementReverseMap
|
|
faces = [name for name in reverseMap.keys() if name.startswith("Face")]
|
|
edges = [name for name in reverseMap.keys() if name.startswith("Edge")]
|
|
vertexes = [name for name in reverseMap.keys() if name.startswith("Vertex")]
|
|
self.assertEqual(len(body.Shape.childShapes()), 1)
|
|
self.assertEqual(body.Shape.childShapes()[0].ElementMapSize, 62)
|
|
self.assertEqual(len(reverseMap),62)
|
|
self.assertEqual(len(faces),12)
|
|
self.assertEqual(len(edges),30)
|
|
self.assertEqual(len(vertexes),20)
|
|
boxVolume = 10 * 10 * 10
|
|
# Full prism minus the rounded triangle prism.
|
|
filletVolume = 1 * 1 * 10 - 1 * 1 * math.pi / 4 * 10 #0.5 * 10
|
|
cutVolume = 24
|
|
self.assertAlmostEqual(volume1, boxVolume )
|
|
self.assertAlmostEqual(volume2, boxVolume - 3 * filletVolume)
|
|
self.assertAlmostEqual(volume3, boxVolume - 3 * filletVolume - cutVolume, 4)
|
|
self.assertAlmostEqual(volume4, boxVolume - 2 * filletVolume - cutVolume, 4)
|
|
|
|
def testSubelementNames(self):
|
|
# Arrange
|
|
doc = App.ActiveDocument
|
|
plane = doc.addObject("Part::Plane", "Plane")
|
|
plane.Length = 10
|
|
plane.Width = 10
|
|
extrude = doc.addObject("Part::Extrusion", "Extrude")
|
|
extrude.Base = plane
|
|
extrude.LengthFwd = 10
|
|
doc.recompute()
|
|
if not App.GuiUp:
|
|
return
|
|
# Act
|
|
App.Gui.Selection.addSelection("", extrude.Name, "Face2")
|
|
# Assert
|
|
self.assertEqual(len(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames),1)
|
|
if extrude.ElementMapVersion == "": # Should be '4' as of Mar 2023.
|
|
self.assertEqual(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames[0],"Face2")
|
|
else:
|
|
self.assertEqual(App.Gui.Selection.getSelectionEx("", 0)[0].SubElementNames[0][-8:],",F.Face2")
|
|
|
|
def testFileSaveRestore(self):
|
|
self.Body = self.Doc.addObject('PartDesign::Body', 'Body')
|
|
self.create_t_sketch()
|
|
self.assertEqual(self.Doc.Sketch.Shape.ElementMapSize, 18)
|
|
filename = self.Doc.Name
|
|
self.Doc.saveAs(filename)
|
|
App.closeDocument(filename)
|
|
self.Doc = App.openDocument(filename+".FCStd")
|
|
self.Doc.recompute()
|
|
self.assertEqual(self.Doc.Sketch.Shape.ElementMapSize, 18)
|
|
|
|
def create_t_sketch(self):
|
|
self.Doc.getObject('Body').newObject('Sketcher::SketchObject', 'Sketch')
|
|
geo_list = [
|
|
Part.LineSegment(App.Vector(0, 0, 0), App.Vector(20, 0, 0)),
|
|
Part.LineSegment(App.Vector(20, 0, 0), App.Vector(20, 10, 0)),
|
|
Part.LineSegment(App.Vector(20, 10, 0), App.Vector(10, 10, 0)),
|
|
Part.LineSegment(App.Vector(10, 10, 0), App.Vector(10, 20, 0)),
|
|
Part.LineSegment(App.Vector(10, 20, 0), App.Vector(0, 20, 0)),
|
|
Part.LineSegment(App.Vector(0, 20, 0), App.Vector(0, 0, 0))]
|
|
self.Doc.getObject('Sketch').addGeometry(geo_list, False)
|
|
con_list = [
|
|
Sketcher.Constraint('Coincident', 0, 2, 1, 1),
|
|
Sketcher.Constraint('Coincident', 1, 2, 2, 1),
|
|
Sketcher.Constraint('Coincident', 2, 2, 3, 1),
|
|
Sketcher.Constraint('Coincident', 3, 2, 4, 1),
|
|
Sketcher.Constraint('Coincident', 4, 2, 5, 1),
|
|
Sketcher.Constraint('Coincident', 5, 2, 0, 1),
|
|
Sketcher.Constraint('Horizontal', 0),
|
|
Sketcher.Constraint('Horizontal', 2),
|
|
Sketcher.Constraint('Horizontal', 4),
|
|
Sketcher.Constraint('Vertical', 1),
|
|
Sketcher.Constraint('Vertical', 3),
|
|
Sketcher.Constraint('Vertical', 5)]
|
|
self.Doc.getObject('Sketch').addConstraint(con_list)
|
|
del geo_list, con_list
|
|
self.Doc.recompute()
|
|
|
|
def testRectanglewithArcChangeinGlobalCenter(self):
|
|
# Arrange
|
|
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Doc.addObject("Sketcher::SketchObject", "Sketch")
|
|
self.Body.addObject(self.PadSketch)
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-50, -25), (100, 50))
|
|
self.Doc.recompute()
|
|
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
self.Body.addObject(self.Pad)
|
|
self.Pad.Profile = self.PadSketch
|
|
self.Pad.Length = 10
|
|
self.Doc.recompute()
|
|
|
|
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
|
|
self.Sketch001.AttachmentSupport = (
|
|
self.Doc.getObject("Pad"),
|
|
[
|
|
"Face6",
|
|
],
|
|
)
|
|
self.Sketch001.MapMode = "FlatFace"
|
|
|
|
TestSketcherApp.CreateRectangleSketch(self.Sketch001, (-40, -20), (80, 40))
|
|
self.Doc.recompute()
|
|
self.Pad1 = self.Doc.addObject("PartDesign::Pad", "Pad1")
|
|
self.Body.addObject(self.Pad1)
|
|
self.Pad1.Profile = self.Sketch001
|
|
self.Pad1.Length = 10
|
|
self.Doc.recompute()
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.ArcOfCircle(
|
|
Part.Circle(
|
|
App.Vector(0.000000, -109.419670, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000),
|
|
88.713871,
|
|
),
|
|
1.258384,
|
|
1.886112,
|
|
)
|
|
)
|
|
self.PadSketch.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 3, -2))
|
|
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 1, 2))
|
|
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 2, 2))
|
|
self.PadSketch.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
|
|
self.PadSketch.trim(2, App.Vector(7.337847, -25.000000, 0))
|
|
self.PadSketch.addConstraint(Sketcher.Constraint("Equal", 3, 1))
|
|
self.PadSketch.addConstraint(Sketcher.Constraint("Horizontal", 5))
|
|
self.PadSketch.addConstraint(Sketcher.Constraint("Radius", 4, 73.031111))
|
|
self.PadSketch.setDatum(18, App.Units.Quantity("70.000000 mm"))
|
|
self.PadSketch.addConstraint(
|
|
Sketcher.Constraint("DistanceY", 4, 3, -1, 1, 88.867210)
|
|
)
|
|
self.PadSketch.setDatum(19, App.Units.Quantity("80.000000 mm"))
|
|
|
|
self.Doc.recompute()
|
|
self.assertTrue(self.Sketch001.isValid())
|
|
|
|
def testRectanglewithArcChangeinGlobalUpperRight(self):
|
|
# Arrange
|
|
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Body.newObject("Sketcher::SketchObject", "Sketch")
|
|
self.PadSketch.AttachmentSupport = (self.Doc.getObject("XY_Plane"), [""])
|
|
self.PadSketch.MapMode = "FlatFace"
|
|
self.Doc.recompute()
|
|
|
|
lastGeoId = len(self.PadSketch.Geometry)
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(6.565019, 5.821458, 0.000000),
|
|
App.Vector(131.750198, 5.821458, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(131.750198, 5.821458, 0.000000),
|
|
App.Vector(131.750198, 75.265900, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(131.750198, 75.265900, 0.000000),
|
|
App.Vector(6.565019, 75.265900, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(6.565019, 75.265900, 0.000000),
|
|
App.Vector(6.565019, 5.821458, 0.000000),
|
|
)
|
|
)
|
|
self.PadSketch.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 0))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 2))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 1))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 3))
|
|
self.PadSketch.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
|
|
self.Doc.recompute()
|
|
|
|
self.Pad = self.Body.newObject("PartDesign::Pad", "Pad")
|
|
self.Pad.Profile = (
|
|
self.Doc.getObject("Sketch"),
|
|
[
|
|
"",
|
|
],
|
|
)
|
|
self.Pad.Length = 10
|
|
self.Doc.recompute()
|
|
self.Pad.ReferenceAxis = (self.Doc.getObject("Sketch"), ["N_Axis"])
|
|
self.Doc.recompute()
|
|
|
|
self.Pad.Length = 10.000000
|
|
self.Pad.TaperAngle = 0.000000
|
|
self.Pad.UseCustomVector = 0
|
|
self.Pad.Direction = (0, 0, 1)
|
|
self.Pad.ReferenceAxis = (self.Doc.getObject("Sketch"), ["N_Axis"])
|
|
self.Pad.AlongSketchNormal = 1
|
|
self.Pad.Type = 0
|
|
self.Pad.UpToFace = None
|
|
self.Pad.Reversed = 0
|
|
self.Pad.Midplane = 0
|
|
self.Pad.Offset = 0
|
|
self.Doc.recompute()
|
|
|
|
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
|
|
self.Sketch001.AttachmentSupport = (
|
|
self.Doc.getObject("Pad"),
|
|
[
|
|
"Face6",
|
|
],
|
|
)
|
|
self.Sketch001.MapMode = "FlatFace"
|
|
self.Doc.recompute()
|
|
|
|
lastGeoId = len(self.Sketch001.Geometry)
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(33.048996, 24.872660, 0.000000),
|
|
App.Vector(125.086029, 24.872660, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(125.086029, 24.872660, 0.000000),
|
|
App.Vector(125.086029, 72.835625, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(125.086029, 72.835625, 0.000000),
|
|
App.Vector(33.048996, 72.835625, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(33.048996, 72.835625, 0.000000),
|
|
App.Vector(33.048996, 24.872660, 0.000000),
|
|
)
|
|
)
|
|
self.Sketch001.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 0))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 2))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 1))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 3))
|
|
self.Sketch001.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
|
|
self.Doc.recompute()
|
|
|
|
self.Pad1 = self.Body.newObject("PartDesign::Pad", "Pad001")
|
|
self.Pad1.Profile = (
|
|
self.Doc.getObject("Sketch001"),
|
|
[
|
|
"",
|
|
],
|
|
)
|
|
self.Pad1.Length = 10
|
|
self.Doc.recompute()
|
|
self.Pad1.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
|
|
|
|
self.Doc.recompute()
|
|
|
|
self.Pad1.Length = 10.000000
|
|
self.Pad1.TaperAngle = 0.000000
|
|
self.Pad1.UseCustomVector = 0
|
|
self.Pad1.Direction = (0, 0, 1)
|
|
self.Pad1.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
|
|
self.Pad1.AlongSketchNormal = 1
|
|
self.Pad1.Type = 0
|
|
self.Pad1.UpToFace = None
|
|
self.Pad1.Reversed = 0
|
|
self.Pad1.Midplane = 0
|
|
self.Pad1.Offset = 0
|
|
self.Doc.recompute()
|
|
|
|
lastGeoId = len(self.Sketch001.Geometry)
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.ArcOfCircle(
|
|
Part.Circle(
|
|
App.Vector(73.611900, -60.502949, 0.000000),
|
|
App.Vector(0.000000, 0.000000, 1.000000),
|
|
80.806032,
|
|
),
|
|
0.997061,
|
|
2.178808,
|
|
)
|
|
)
|
|
self.PadSketch.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 2, 0))
|
|
self.constraintList.append(Sketcher.Constraint("PointOnObject", 4, 1, 0))
|
|
self.PadSketch.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
self.Doc.recompute()
|
|
self.PadSketch.trim(0, App.Vector(69.157609, 5.865876, 0))
|
|
self.Doc.recompute()
|
|
self.assertTrue(self.Sketch001.isValid())
|
|
|
|
def testPadChange_UpToFirst_to_Dimension(self):
|
|
# Arrange
|
|
self.Body = self.Doc.addObject("PartDesign::Body", "Body")
|
|
# Make first offset cube Pad
|
|
self.PadSketch = self.Doc.addObject("Sketcher::SketchObject", "Sketch")
|
|
self.Body.addObject(self.PadSketch)
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-42.5, -42.5), (85, 85))
|
|
self.Doc.recompute()
|
|
TestSketcherApp.CreateRectangleSketch(self.PadSketch, (-37.5, -37.5), (75, 75))
|
|
self.Doc.recompute()
|
|
self.Pad = self.Doc.addObject("PartDesign::Pad", "Pad")
|
|
self.Body.addObject(self.Pad)
|
|
self.Pad.Profile = self.PadSketch
|
|
self.Pad.Length = 10
|
|
self.Doc.recompute()
|
|
|
|
self.Sketch001 = self.Body.newObject("Sketcher::SketchObject", "Sketch001")
|
|
self.Sketch001.AttachmentSupport = (
|
|
self.Doc.getObject("Pad"),
|
|
[
|
|
"Face5",
|
|
],
|
|
)
|
|
self.Sketch001.MapMode = "FlatFace"
|
|
self.Doc.recompute()
|
|
lastGeoId = len(self.Sketch001.Geometry)
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(-33.953453, 7.680901, 0.000000),
|
|
App.Vector(-33.953453, 2.543239, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(-33.953453, 2.543239, 0.000000),
|
|
App.Vector(33.282925, 2.543239, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(33.282925, 2.543239, 0.000000),
|
|
App.Vector(33.282925, 7.680901, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(33.282925, 7.680901, 0.000000),
|
|
App.Vector(-33.953453, 7.680901, 0.000000),
|
|
)
|
|
)
|
|
self.Sketch001.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 0))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 2))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 1))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 3))
|
|
self.Sketch001.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
|
|
self.Doc.recompute()
|
|
self.Pad001 = self.Body.newObject("PartDesign::Pad", "Pad001")
|
|
self.Pad001.Profile = (
|
|
self.Doc.getObject("Sketch001"),
|
|
[
|
|
"",
|
|
],
|
|
)
|
|
self.Pad001.Length = 10
|
|
self.Doc.recompute()
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
|
|
self.Doc.recompute()
|
|
self.Pad001.UseCustomVector = 0
|
|
self.Pad001.Direction = (0, -1, 0)
|
|
self.Pad001.ReferenceAxis = (self.Doc.getObject("Sketch001"), ["N_Axis"])
|
|
self.Pad001.AlongSketchNormal = 1
|
|
self.Pad001.Type = 2
|
|
self.Pad001.UpToFace = None
|
|
self.Pad001.Reversed = 0
|
|
self.Pad001.Midplane = 0
|
|
self.Pad001.Offset = 0
|
|
self.Doc.recompute()
|
|
self.Sketch002 = self.Body.newObject("Sketcher::SketchObject", "Sketch002")
|
|
self.Sketch002.AttachmentSupport = (
|
|
self.Doc.getObject("Pad001"),
|
|
[
|
|
"Face11",
|
|
],
|
|
)
|
|
self.Sketch002.MapMode = "FlatFace"
|
|
self.Doc.recompute()
|
|
lastGeoId = len(self.Sketch002.Geometry)
|
|
|
|
self.geoList = []
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(-30.826233, 35.070259, 0.000000),
|
|
App.Vector(-30.826233, 30.602728, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(-30.826233, 30.602728, 0.000000),
|
|
App.Vector(30.602348, 30.602728, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(30.602348, 30.602728, 0.000000),
|
|
App.Vector(30.602348, 35.070259, 0.000000),
|
|
)
|
|
)
|
|
self.geoList.append(
|
|
Part.LineSegment(
|
|
App.Vector(30.602348, 35.070259, 0.000000),
|
|
App.Vector(-30.826233, 35.070259, 0.000000),
|
|
)
|
|
)
|
|
self.Sketch002.addGeometry(self.geoList, False)
|
|
del self.geoList
|
|
|
|
self.constraintList = []
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 0, 2, 1, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 1, 2, 2, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 2, 2, 3, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Coincident", 3, 2, 0, 1))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 0))
|
|
self.constraintList.append(Sketcher.Constraint("Vertical", 2))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 1))
|
|
self.constraintList.append(Sketcher.Constraint("Horizontal", 3))
|
|
self.Sketch002.addConstraint(self.constraintList)
|
|
del self.constraintList
|
|
|
|
self.Doc.recompute()
|
|
|
|
self.Pad002 = self.Body.newObject("PartDesign::Pad", "Pad002")
|
|
self.Pad002.Profile = (
|
|
self.Doc.getObject("Sketch002"),
|
|
[
|
|
"",
|
|
],
|
|
)
|
|
self.Pad002.Length = 10
|
|
self.Doc.recompute()
|
|
self.Pad002.ReferenceAxis = (self.Doc.getObject("Sketch002"), ["N_Axis"])
|
|
|
|
self.Doc.recompute()
|
|
self.Pad002.Length = 10.000000
|
|
self.Pad002.TaperAngle = 0.000000
|
|
self.Pad002.UseCustomVector = 0
|
|
self.Pad002.Direction = (0, 0, 1)
|
|
self.Pad002.ReferenceAxis = (self.Doc.getObject("Sketch002"), ["N_Axis"])
|
|
self.Pad002.AlongSketchNormal = 1
|
|
self.Pad002.Type = 0
|
|
self.Pad002.UpToFace = None
|
|
self.Pad002.Reversed = 0
|
|
self.Pad002.Midplane = 0
|
|
self.Pad002.Offset = 0
|
|
self.Doc.recompute()
|
|
|
|
self.Pad001.Type = "Length"
|
|
self.Pad001.Length = "4 mm"
|
|
self.Doc.recompute()
|
|
"""Assumption: the warning <PropertyLinks> PropertyLinks.cpp(453):
|
|
PartDesignTestTNP1#Sketch002.AttachmentSupport missing element
|
|
reference PartDesignTestTNP1#Pad001 ;g815v1;SKT;:H976,V;:L#2;PSM;
|
|
:H976:9,E;:L#8;PSM;:H976:9,F;:H-977,F.Face11 is only temporary and can be ignored."""
|
|
self.assertTrue(self.Sketch002.Support[0][1][0] == "Face11")
|
|
self.assertGreaterEqual(self.Body.Shape.Volume, 20126)
|
|
|
|
def tearDown(self):
|
|
""" Close our test document """
|
|
App.closeDocument(self.Doc.Name)
|