3d3eaef02e
CAM/App/PathSegmentWalker.cpp - Add G74 to drill/tap/bore G-code recognition for tapping cycles CAM/InitGui.py - Move CAM_Tapping command behind experimental feature flag - Only group drilling/tapping commands if both are enabled CAM/Path/Base/Generator/tapping.py - Add pitch and spindle_speed parameters to tapping.generate - Output S (spindle speed) and F (pitch) in generated G-code CAM/Path/Op/Tapping.py - Require Pitch property for tap tools and SpindleSpeed for tool controllers - Pass pitch and spindle speed to tapping.generate - Use SpindleDirection to determine right/left hand tap CAM/Path/Post/scripts/linuxcnc_post.py - Handle G84/G74 tapping cycles: convert pitch and spindle speed to feed rate - Remove F and S from output and recalculate F as needed CAM/Path/Tool/shape/models/tap.py - Add Pitch property to ToolBitShapeTap schema - CAM/Path/Tool/toolbit/models/tap.py - Show pitch and rotation in tap tool summary - Use is_imperial_pitch to format pitch as TPI or mm CAM/Path/Tool/toolbit/util.py - Add is_imperial_pitch utility to classify pitch as imperial or metric CAM/Tools/Bit/375-16_Tap.fctb - Remove unused parameters (Coating, Rotation, TPI, Type) - Keep only relevant tap parameters for new schema
17 lines
331 B
Plaintext
17 lines
331 B
Plaintext
{
|
|
"version": 2,
|
|
"name": "375-16_Tap",
|
|
"shape": "tap.fcstd",
|
|
"shape-type": "tap",
|
|
"parameter": {
|
|
"CuttingEdgeLength": "1.063 \"",
|
|
"Diameter": "0.375 \"",
|
|
"Flutes": "3",
|
|
"Length": "2.500 \"",
|
|
"Pitch": "0.000 in",
|
|
"ShankDiameter": "0.250 \"",
|
|
"TipAngle": "90.000 \u00b0"
|
|
},
|
|
"attribute": {}
|
|
}
|