sliptonic 4137df2cee Merge pull request #23718 from pmjdebruijn/cam-pocketshape-offset ...

CAM: PocketShape defaults to Offset and 50% StepOver

2025-09-19 14:27:02 -05:00

..

Gui

also add qt5 compatibility for checkbox state change signal

2025-09-14 14:59:21 -04:00

__init__.py

…

Adaptive.py

[CAM] re-enable adaptive profile mode

2025-09-07 10:55:24 -04:00

Area.py

Merge pull request #21617 from tarman3/profileoutside

2025-06-02 10:28:45 -05:00

Base.py

CAM: Fix seach tool controller in Operations group (#22728)

2025-08-11 11:04:06 -05:00

CircularHoleBase.py

CAM: sort locations for all drilling operations

2025-05-25 00:27:03 +02:00

Custom.py

CAM: Custom gcode - Improve error messages (#21509)

2025-06-23 10:05:01 -05:00

Deburr.py

Revert "CAM: Rename CW/CCW to Climb/Conventional for consistency (#14364)"

2024-11-24 09:18:23 +01:00

Drilling.py

CAM: fix G0 regression in drilling (#22602)

2025-09-05 11:14:58 -05:00

Engrave.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

EngraveBase.py

CAM: sort tool paths for Engrave and Deburr operation (#21531)

2025-06-23 10:22:21 -05:00

FeatureExtension.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

Helix.py

CAM: sort locations for all drilling operations

2025-05-25 00:27:03 +02:00

MillFace.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

Pocket.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

PocketBase.py

Revert "CAM: Rename CW/CCW to Climb/Conventional for consistency (#14364)"

2024-11-24 09:18:23 +01:00

PocketShape.py

CAM: PocketShape defaults to Offset and 50% StepOver

2025-09-07 14:35:50 +02:00

Probe.py

[CAM] Add UI elements for viewing and editing tool controller parameters from within the operation edit UI (#23180)

2025-09-02 10:19:33 -05:00

Profile.py

[CAM] implement multipass profile operations (#17326)

2024-12-13 11:20:32 -06:00

Slot.py

Refactor slot op. (#21799)

2025-06-23 21:22:33 +02:00

Surface.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

SurfaceSupport.py

CAM: Fix: rename vbit and threadmill back to v-bit and thread-mill to avoid backward compatibility issues

2025-06-30 22:59:14 +02:00

Tapping.py

CAM: sort locations for all drilling operations

2025-05-25 00:27:03 +02:00

ThreadMilling.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

Util.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00

Vcarve.py

CAM: use dict constructor for Command in VCarve

2025-09-01 11:24:32 -05:00

Waterline.py

CAM: apply precommit

2024-09-03 14:54:36 -04:00