diff --git a/freecad/gears/translations/Gear.ts b/freecad/gears/translations/Gear.ts index 2f27a36..5f8924d 100644 --- a/freecad/gears/translations/Gear.ts +++ b/freecad/gears/translations/Gear.ts @@ -4,7 +4,7 @@ App::Property - + freecad.gears-version @@ -688,7 +688,7 @@ - + Migrating 'teeth' property to 'num_teeth' on {} part diff --git a/freecad/gears/translations/Gear_de.qm b/freecad/gears/translations/Gear_de.qm new file mode 100644 index 0000000..9953a84 Binary files /dev/null and b/freecad/gears/translations/Gear_de.qm differ diff --git a/freecad/gears/translations/Gear_de.ts b/freecad/gears/translations/Gear_de.ts new file mode 100644 index 0000000..b39aee3 --- /dev/null +++ b/freecad/gears/translations/Gear_de.ts @@ -0,0 +1,718 @@ + + + + + App::Property + + + + freecad.gears-version + freecad.gears-version + + + + + + + + + + + + + + number of teeth + Zähnezahl + + + + + + + + + + + + + + + height + height + + + + pitch_angle + pitch_angle + + + + pressure_angle + Eingriffwinkel + + + + + + + + + module + Modul + + + + + + + clearance + clearance + + + + + + + + number of points for spline + number of points for spline + + + + if value is true the gears outer face will match the z=0 plane + if value is true the gears outer face will match the z=0 plane + + + + + + + + The arc length on the pitch circle by which the tooth thicknes is reduced. + The arc length on the pitch circle by which the tooth thicknes is reduced. + + + + + + + test + test + + + + angle used for spiral bevel-gears + angle used for spiral bevel-gears + + + + + + + The pitch diameter. + Der Teilkreisdurchmesser. + + + + + + + The angle by which this gear can turn without moving the mating gear. + The angle by which this gear can turn without moving the mating gear. + + + + master gear + master gear + + + + slave gear + slave gear + + + + + angle at which second gear is placed + angle at which second gear is placed + + + + number of teeth of other gear + Zähnezahl des anderen Zahnrades + + + + + + + thickness + thickness + + + + + + + + pressure angle + Eingriffwinkel + + + + + number of profiles used for loft + number of profiles used for loft + + + + if true no boolean operation is done + if true no boolean operation is done + + + + the python object + das Python-Objekt + + + + + + + + double helix + Doppelwendel + + + + + + + + + beta + beta + + + + + + + + + a fillet for the tooth-head, radius = head_fillet x module + eine Abrundung des Zahnkopfes, radius = head_fillet x module + + + + + + + + + a fillet for the tooth-root, radius = root_fillet x module + eine Abrundung des Zahngrundes, radius = head_fillet x module + + + + + + head_value * module_value = additional length of head + head_value * module_value = additional length of head + + + + + inner_diameter divided by module (hypocycloid) + inner_diameter divided by module (hypocycloid) + + + + + outer_diameter divided by module (epicycloid) + outer_diameter divided by module (epicycloid) + + + + + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + + + + + pitch in the transverse plane + pitch in the transverse plane + + + + + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + + + + + + + head * module = additional length of head + head * module = additional length of head + + + + + + clearance * module = additional length of root + clearance * module = additional length of root + + + + Pin ball circle radius (overrides Tooth Pitch) + Pin ball circle radius (overrides Tooth Pitch) + + + + Roller Diameter + Rollendurchmesser + + + + Eccentricity + Eccentricity + + + + Pressure angle limit + Pressure angle limit + + + + Offset in pressure angle + Offset in pressure angle + + + + Number of teeth in Cam + Number of teeth in Cam + + + + Number of points used for spline interpolation + Number of points used for spline interpolation + + + + Center hole's radius + Center hole's radius + + + + Create pins in place + Create pins in place + + + + Center pin Z axis to generated disks + Center pin Z axis to generated disks + + + + Show main cam disk + Show main cam disk + + + + Show another reversed cam disk on top + Show another reversed cam disk on top + + + + + simple + simple + + + + + normal module if properties_from_tool=True, else it's the transverse module. + normal module if properties_from_tool=True, else it's the transverse module. + + + + inside diameter + Innendurchmesser + + + + + root diameter + root diameter + + + + + transverse_pitch + transverse_pitch + + + + Outside diameter + Außendurchmesser + + + + + backlash direction + backlash direction + + + + + shift + shift + + + + + + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + + + + python gear object + python gear object + + + + undercut + Hinterschnitt + + + + outside diameter + Außendurchmesser + + + + traverse module of the generated gear + traverse module of the generated gear + + + + the bolt radius of the rack/chain + der Rollenradius der Zahnstange bzw. Kette + + + + type of timing-gear + Art der Zahnriemenscheibe + + + + + pitch of gear + pitch of gear + + + + radial height of teeth + radial height of teeth + + + + radial difference between pitch diameter and head of gear + radial difference between pitch diameter and head of gear + + + + radius of first arc + radius of first arc + + + + radius of second arc + radius of second arc + + + + radius of third arc + radius of third arc + + + + x-offset of second arc-midpoint + x-offset of second arc-midpoint + + + + radial height of tooth + radial height of tooth + + + + radial distance from tooth-head to pitch circle + radial distance from tooth-head to pitch circle + + + + angle of tooth flanks + angle of tooth flanks + + + + extrusion height + extrusion height + + + + diameter + Durchmesser + + + + reverse rotation of helix + reverse rotation of helix + + + + FCGear_BevelGear + + + Bevel Gear + Kegelrad + + + + Create a Bevel gear + Erstellt ein Kegelrad + + + + FCGear_CrownGear + + + Crown Gear + Kronenrad + + + + Create a Crown gear + Erstellt ein Kronenrad + + + + FCGear_CycloidGear + + + Cycloid Gear + Zykloidenrad + + + + Create a Cycloid gear + Erstellt ein Zykloidenrad + + + + FCGear_CycloidRack + + + Cycloid Rack + Zykloidenzahnstange + + + + Create an Cycloid rack + Erstellt eine Zykloidenzahnstange + + + + FCGear_GearConnector + + + + Combine two gears + Combine two gears + + + + FCGear_HypoCycloidGear + + + HypoCycloid Gear + Hypozykloidenrad + + + + Create a HypoCycloid gear with its pins + Erstellt ein Paar Hypozykloidenräder mit zugehörigen Rollen + + + + FCGear_InternalInvoluteGear + + + Internal Involute Gear + Innenverzahntes Evolventenrad + + + + Create an internal involute gear + Erstellt ein innenverzahntes Evolventenrad + + + + FCGear_InvoluteGear + + + Involute Gear + Evolventenrad + + + + Create an external involute gear + Erstellt ein Evolventenstirnrad + + + + FCGear_InvoluteRack + + + Involute Rack + Evolventenzahnstange + + + + Create an Involute rack + Erstellt eine Evolventenzahnstange + + + + FCGear_LanternGear + + + Lantern Gear + Triebstockrad + + + + Create a Lantern gear + Erstellt ein Triebstockrad + + + + FCGear_TimingGear + + + Timing Gear + Zahnriemenscheibe + + + + Create a Timing gear + Erstellt eine Zahnriemenscheibe + + + + FCGear_TimingGearT + + + Timing Gear T-shape + ZahnriemenscheibeT + + + + Create a Timing gear T-shape + Erstellt eine Zahnriemenscheibe Bauart T + + + + FCGear_WormGear + + + Worm Gear + Schneckenwelle + + + + Create a Worm gear + Erstellt eine Schneckenwelle + + + + Log + + + Please select two gear objects. + Bitte zwei Zahnradobjekte auswählen. + + + + Selected object is not a gear. + Das ausgewählte Objekt ist kein Zahnrad. + + + + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + Gear-Modul: Kronenrad erstellt, preview_mode = true für bessere Leistung. Eigenschaft preview_mode property auf false setzen, wenn Zähne dargestellt werden sollen. + + + + Generating cam disk + + Generating cam disk + + + + + Generating secondary cam disk + + Generating secondary cam disk + + + + + Generating pins + + Generating pins + + + + + Checking FreeCAD version + + Checking FreeCAD version + + + + + FreeCAD version (currently {}.{}.{} ({})) must be at least {}.{}.{} ({}) in order to work with Python 3.11 and above + + FreeCAD-Version (derzeit {}.{}.{} ({})) muss mindestens {}.{}.{} ({}) sein, um mit Python 3.11 und neuer zu funktionieren + + + + + Migrating 'teeth' property to 'num_teeth' on {} part + + Migrating 'teeth' property to 'num_teeth' on {} part + + + + + Workbench + + + + + Gear + Gear + + + + Gear Workbench + Arbeitsbereich Gear + + + diff --git a/freecad/gears/translations/Gear_el.qm b/freecad/gears/translations/Gear_el.qm new file mode 100644 index 0000000..63ed684 Binary files /dev/null and b/freecad/gears/translations/Gear_el.qm differ diff --git a/freecad/gears/translations/Gear_el.ts b/freecad/gears/translations/Gear_el.ts new file mode 100644 index 0000000..4b129ca --- /dev/null +++ b/freecad/gears/translations/Gear_el.ts @@ -0,0 +1,718 @@ + + + + + App::Property + + + + freecad.gears-version + freecad.γρανάζια-έκδοση + + + + + + + + + + + + + + number of teeth + αριθμός δοντιών + + + + + + + + + + + + + + + height + ύψος + + + + pitch_angle + βημα_γωγίας + + + + pressure_angle + πίεση_γωνίας + + + + + + + + + module + module + + + + + + + clearance + ελευθέρωση + + + + + + + + number of points for spline + αριθμός σημείων για λωρίδα + + + + if value is true the gears outer face will match the z=0 plane + Εάν η τιμή είναι true (αληθής), η εξωτερική όψη των γραναζιών θα ταιριάζει με το επίπεδο z=0 + + + + + + + + The arc length on the pitch circle by which the tooth thicknes is reduced. + The arc length on the pitch circle by which the tooth thicknes is reduced. + + + + + + + test + test + + + + angle used for spiral bevel-gears + angle used for spiral bevel-gears + + + + + + + The pitch diameter. + The pitch diameter. + + + + + + + The angle by which this gear can turn without moving the mating gear. + The angle by which this gear can turn without moving the mating gear. + + + + master gear + master gear + + + + slave gear + slave gear + + + + + angle at which second gear is placed + angle at which second gear is placed + + + + number of teeth of other gear + number of teeth of other gear + + + + + + + thickness + thickness + + + + + + + + pressure angle + pressure angle + + + + + number of profiles used for loft + number of profiles used for loft + + + + if true no boolean operation is done + if true no boolean operation is done + + + + the python object + the python object + + + + + + + + double helix + double helix + + + + + + + + + beta + beta + + + + + + + + + a fillet for the tooth-head, radius = head_fillet x module + a fillet for the tooth-head, radius = head_fillet x module + + + + + + + + + a fillet for the tooth-root, radius = root_fillet x module + a fillet for the tooth-root, radius = root_fillet x module + + + + + + head_value * module_value = additional length of head + head_value * module_value = additional length of head + + + + + inner_diameter divided by module (hypocycloid) + inner_diameter divided by module (hypocycloid) + + + + + outer_diameter divided by module (epicycloid) + outer_diameter divided by module (epicycloid) + + + + + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + + + + + pitch in the transverse plane + pitch in the transverse plane + + + + + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + + + + + + + head * module = additional length of head + head * module = additional length of head + + + + + + clearance * module = additional length of root + clearance * module = additional length of root + + + + Pin ball circle radius (overrides Tooth Pitch) + Pin ball circle radius (overrides Tooth Pitch) + + + + Roller Diameter + Roller Diameter + + + + Eccentricity + Eccentricity + + + + Pressure angle limit + Pressure angle limit + + + + Offset in pressure angle + Offset in pressure angle + + + + Number of teeth in Cam + Number of teeth in Cam + + + + Number of points used for spline interpolation + Number of points used for spline interpolation + + + + Center hole's radius + Center hole's radius + + + + Create pins in place + Create pins in place + + + + Center pin Z axis to generated disks + Center pin Z axis to generated disks + + + + Show main cam disk + Show main cam disk + + + + Show another reversed cam disk on top + Show another reversed cam disk on top + + + + + simple + απλό + + + + + normal module if properties_from_tool=True, else it's the transverse module. + normal module if properties_from_tool=True, else it's the transverse module. + + + + inside diameter + εσωτερική διάμετρος + + + + + root diameter + root diameter + + + + + transverse_pitch + transverse_pitch + + + + Outside diameter + Εξωτερική διάμετρος + + + + + backlash direction + backlash direction + + + + + shift + shift + + + + + + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + + + + python gear object + python gear object + + + + undercut + undercut + + + + outside diameter + outside diameter + + + + traverse module of the generated gear + traverse module of the generated gear + + + + the bolt radius of the rack/chain + Η ακτίνα του μπουλονιού της οδοντωτής ράβδος/αλυσίδας + + + + type of timing-gear + τύπος μηχανισμού χρονισμού + + + + + pitch of gear + βήμα γραναζιών + + + + radial height of teeth + radial height of teeth + + + + radial difference between pitch diameter and head of gear + radial difference between pitch diameter and head of gear + + + + radius of first arc + radius of first arc + + + + radius of second arc + ακτίνα δεύτερου τόξου + + + + radius of third arc + radius of third arc + + + + x-offset of second arc-midpoint + x-offset of second arc-midpoint + + + + radial height of tooth + radial height of tooth + + + + radial distance from tooth-head to pitch circle + radial distance from tooth-head to pitch circle + + + + angle of tooth flanks + angle of tooth flanks + + + + extrusion height + extrusion height + + + + diameter + diameter + + + + reverse rotation of helix + reverse rotation of helix + + + + FCGear_BevelGear + + + Bevel Gear + Bevel Gear + + + + Create a Bevel gear + Create a Bevel gear + + + + FCGear_CrownGear + + + Crown Gear + Crown Gear + + + + Create a Crown gear + Create a Crown gear + + + + FCGear_CycloidGear + + + Cycloid Gear + Cycloid Gear + + + + Create a Cycloid gear + Create a Cycloid gear + + + + FCGear_CycloidRack + + + Cycloid Rack + Cycloid Rack + + + + Create an Cycloid rack + Create an Cycloid rack + + + + FCGear_GearConnector + + + + Combine two gears + Combine two gears + + + + FCGear_HypoCycloidGear + + + HypoCycloid Gear + HypoCycloid Gear + + + + Create a HypoCycloid gear with its pins + Create a HypoCycloid gear with its pins + + + + FCGear_InternalInvoluteGear + + + Internal Involute Gear + Εσωτερικό Ελικοειδές Γρανάζι + + + + Create an internal involute gear + Δημιουργήστε ένα εσωτερικό ελικοειδές γρανάζι + + + + FCGear_InvoluteGear + + + Involute Gear + Ελικοειδές Γρανάζια + + + + Create an external involute gear + Δημιουργήστε ένα εξωτερικό ελικοειδές γρανάζι + + + + FCGear_InvoluteRack + + + Involute Rack + Ελικοειδές Οδοντωτή ράβδος + + + + Create an Involute rack + Δημιουργήστε μαι Ελικοειδή Οδοντωτή ράβδος + + + + FCGear_LanternGear + + + Lantern Gear + Lantern Gear + + + + Create a Lantern gear + Create a Lantern gear + + + + FCGear_TimingGear + + + Timing Gear + Timing Gear + + + + Create a Timing gear + Create a Timing gear + + + + FCGear_TimingGearT + + + Timing Gear T-shape + Timing Gear T-shape + + + + Create a Timing gear T-shape + Create a Timing gear T-shape + + + + FCGear_WormGear + + + Worm Gear + Worm Gear + + + + Create a Worm gear + Create a Worm gear + + + + Log + + + Please select two gear objects. + Please select two gear objects. + + + + Selected object is not a gear. + Selected object is not a gear. + + + + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + + + + Generating cam disk + + Generating cam disk + + + + + Generating secondary cam disk + + Generating secondary cam disk + + + + + Generating pins + + Generating pins + + + + + Checking FreeCAD version + + Checking FreeCAD version + + + + + FreeCAD version (currently {}.{}.{} ({})) must be at least {}.{}.{} ({}) in order to work with Python 3.11 and above + + Η έκδοση FreeCAD (προς το παρόν {}.{}.{} ({})) πρέπει να είναι τουλάχιστον {}.{}.{} ({}) για να λειτουργήσει με Python 3.11 και νεότερη έκδοση + + + + + Migrating 'teeth' property to 'num_teeth' on {} part + + Migrating 'teeth' property to 'num_teeth' on {} part + + + + + Workbench + + + + + Gear + Γρανάζι + + + + Gear Workbench + Πάγκος εργασίας Γραναζιών + + + diff --git a/freecad/gears/translations/Gear_es-AR.ts b/freecad/gears/translations/Gear_es-AR.ts index 2caa687..1d14817 100644 --- a/freecad/gears/translations/Gear_es-AR.ts +++ b/freecad/gears/translations/Gear_es-AR.ts @@ -4,7 +4,7 @@ App::Property - + freecad.gears-version Versión de freecad.gears @@ -475,10 +475,6 @@ reverse rotation of helix Revertir rotación de hélice - - Combine two gears - Combinar dos engranajes - FCGear_BevelGear @@ -698,7 +694,7 @@ - + Migrating 'teeth' property to 'num_teeth' on {} part Migrando propiedad de 'teeth' a 'num_teeth' en la parte {} diff --git a/freecad/gears/translations/Gear_es-ES.ts b/freecad/gears/translations/Gear_es-ES.ts index 7dce4b0..dca8842 100644 --- a/freecad/gears/translations/Gear_es-ES.ts +++ b/freecad/gears/translations/Gear_es-ES.ts @@ -4,7 +4,7 @@ App::Property - + freecad.gears-version Versión de freecad.gears @@ -475,10 +475,6 @@ reverse rotation of helix Revertir rotación de hélice - - Combine two gears - Combinar dos engranajes - FCGear_BevelGear @@ -698,7 +694,7 @@ - + Migrating 'teeth' property to 'num_teeth' on {} part Migrando propiedad de 'teeth' a 'num_teeth' en la parte {} diff --git a/freecad/gears/translations/Gear_pl.qm b/freecad/gears/translations/Gear_pl.qm new file mode 100644 index 0000000..63c505b Binary files /dev/null and b/freecad/gears/translations/Gear_pl.qm differ diff --git a/freecad/gears/translations/Gear_pl.ts b/freecad/gears/translations/Gear_pl.ts new file mode 100644 index 0000000..ad3dc91 --- /dev/null +++ b/freecad/gears/translations/Gear_pl.ts @@ -0,0 +1,720 @@ + + + + + App::Property + + + + freecad.gears-version + wersja środowiska FreeCAD.gears + + + + + + + + + + + + + + number of teeth + liczba zębów + + + + + + + + + + + + + + + height + wysokość + + + + pitch_angle + kąt_skoku + + + + pressure_angle + kąt_natarcia + + + + + + + + + module + moduł + + + + + + + clearance + pasowanie + + + + + + + + number of points for spline + ilość węzłów linii złożonej + + + + if value is true the gears outer face will match the z=0 plane + if value is true the gears outer face will match the z=0 plane + + + + + + + + The arc length on the pitch circle by which the tooth thicknes is reduced. + The arc length on the pitch circle by which the tooth thicknes is reduced. + + + + + + + test + test + + + + angle used for spiral bevel-gears + angle used for spiral bevel-gears + + + + + + + The pitch diameter. + Średnica podziałki. + + + + + + + The angle by which this gear can turn without moving the mating gear. + The angle by which this gear can turn without moving the mating gear. + + + + master gear + koło zębate główne + + + + slave gear + koło zębate podrzędne + + + + + angle at which second gear is placed + kąt, pod którym ustawiony jest drugie koło zębate + + + + number of teeth of other gear + liczba zębów drugiego koła zębatego + + + + + + + thickness + grubość + + + + + + + + pressure angle + kąt nacisku + + + + + number of profiles used for loft + liczba profili używanych dla loftu + + + + if true no boolean operation is done + jeśli prawda, żadna operacja logiczna nie będzie wykonana + + + + the python object + obiekt Pythona + + + + + + + + double helix + podwójna helisa + + + + + + + + + beta + beta + + + + + + + + + a fillet for the tooth-head, radius = head_fillet x module + a fillet for the tooth-head, radius = head_fillet x module + + + + + + + + + a fillet for the tooth-root, radius = root_fillet x module + a fillet for the tooth-root, radius = root_fillet x module + + + + + + head_value * module_value = additional length of head + head_value * module_value = additional length of head + + + + + inner_diameter divided by module (hypocycloid) + inner_diameter divided by module (hypocycloid) + + + + + outer_diameter divided by module (epicycloid) + outer_diameter divided by module (epicycloid) + + + + + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + + + + + pitch in the transverse plane + pitch in the transverse plane + + + + + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + + + + + + + head * module = additional length of head + głowica * moduł = dodatkowa długość głowicy + + + + + + clearance * module = additional length of root + clearance * module = additional length of root + + + + Pin ball circle radius (overrides Tooth Pitch) + Pin ball circle radius (overrides Tooth Pitch) + + + + Roller Diameter + Roller Diameter + + + + Eccentricity + Eccentricity + + + + Pressure angle limit + Ograniczenie kąta nacisku + + + + Offset in pressure angle + Przesunięcie w kącie nacisku + + + + Number of teeth in Cam + Number of teeth in Cam + + + + Number of points used for spline interpolation + Liczba punktów użytych do interpolacji splajnu + + + + Center hole's radius + Promień środkowego otworu + + + + Create pins in place + Tworzenie pinezek w miejscu + + + + Center pin Z axis to generated disks + Centrująca pinezka na osi Z do wygenerowania dysków + + + + Show main cam disk + Show main cam disk + + + + Show another reversed cam disk on top + Show another reversed cam disk on top + + + + + simple + prosty + + + + + normal module if properties_from_tool=True, else it's the transverse module. + normalny moduł, jeśli properties_from_tool=Prawda, w przeciwnym razie jest to moduł poprzeczny. + + + + inside diameter + średnica wewnętrzna + + + + + root diameter + ⌀ otworu + + + + + transverse_pitch + transverse_pitch + + + + Outside diameter + Średnica zewnętrzna + + + + + backlash direction + Kierunek luzu + + + + + shift + przesunięcie + + + + + + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + + + + python gear object + python gear object + + + + undercut + undercut + + + + outside diameter + ⌀ zewnętrzna + + + + traverse module of the generated gear + traverse module of the generated gear + + + + the bolt radius of the rack/chain + the bolt radius of the rack/chain + + + + type of timing-gear + type of timing-gear + + + + + pitch of gear + skok koła zębatego + + + + radial height of teeth + promieniowa wysokość zęba + + + + radial difference between pitch diameter and head of gear + radial difference between pitch diameter and head of gear + + + + radius of first arc + promień pierwszego łuku + + + + radius of second arc + promień drugiego łuku + + + + radius of third arc + promień trzeciego łuku + + + + x-offset of second arc-midpoint + x-offset of second arc-midpoint + + + + radial height of tooth + promieniowa wysokość zęba + + + + radial distance from tooth-head to pitch circle + radial distance from tooth-head to pitch circle + + + + angle of tooth flanks + angle of tooth flanks + + + + extrusion height + wysokość wyciągnięcia + + + + diameter + średnica + + + + reverse rotation of helix + odwrotny skręt helisy + + + + FCGear_BevelGear + + + Bevel Gear + Bevel Gear + + + + Create a Bevel gear + Create a Bevel gear + + + + FCGear_CrownGear + + + Crown Gear + Crown Gear + + + + Create a Crown gear + Create a Crown gear + + + + FCGear_CycloidGear + + + Cycloid Gear + Przekładnia cykloidalna + + + + Create a Cycloid gear + Utwórz przekładnię cykloidalną + + + + FCGear_CycloidRack + + + Cycloid Rack + Cycloid Rack + + + + Create an Cycloid rack + Create an Cycloid rack + + + + FCGear_GearConnector + + + + Combine two gears + Combine two gears + + + + FCGear_HypoCycloidGear + + + HypoCycloid Gear + HypoCycloid Gear + + + + Create a HypoCycloid gear with its pins + Create a HypoCycloid gear with its pins + + + + FCGear_InternalInvoluteGear + + + Internal Involute Gear + Internal Involute Gear + + + + Create an internal involute gear + Create an internal involute gear + + + + FCGear_InvoluteGear + + + Involute Gear + Involute Gear + + + + Create an external involute gear + Create an external involute gear + + + + FCGear_InvoluteRack + + + Involute Rack + Involute Rack + + + + Create an Involute rack + Create an Involute rack + + + + FCGear_LanternGear + + + Lantern Gear + Lantern Gear + + + + Create a Lantern gear + Create a Lantern gear + + + + FCGear_TimingGear + + + Timing Gear + Timing Gear + + + + Create a Timing gear + Create a Timing gear + + + + FCGear_TimingGearT + + + Timing Gear T-shape + Timing Gear T-shape + + + + Create a Timing gear T-shape + Create a Timing gear T-shape + + + + FCGear_WormGear + + + Worm Gear + Przekładnia ślimakowa + + + + Create a Worm gear + Utwórz przekładnię ślimakową + + + + Log + + + Please select two gear objects. + Wybierz dwa obiekty przekładni. + + + + Selected object is not a gear. + Wybrany obiekt nie jest kołem zębatym. + + + + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + Moduł koła zębatego: Utworzono koło zębate koronowe, tryb podglądu = prawda dla lepszej wydajności. Ustaw właściwość preview_mode na fałsz, gdy będziesz gotowy do wycięcia zębów. + + + + Generating cam disk + + Generating cam disk + + + + + Generating secondary cam disk + + Generating secondary cam disk + + + + + Generating pins + + Generating pins + + + + + Checking FreeCAD version + + Sprawdzanie wersji FreeCAD + + + + + FreeCAD version (currently {}.{}.{} ({})) must be at least {}.{}.{} ({}) in order to work with Python 3.11 and above + + Wersja FreeCAD (obecnie {}.{}.{} ({})) +musi to być co najmniej {}.{}.{} ({}), +aby zapewnić zgodność ze środowiskiem Python 3.11 i nowszym. + + + + + Migrating 'teeth' property to 'num_teeth' on {} part + + Migrating 'teeth' property to 'num_teeth' on {} part + + + + + Workbench + + + + + Gear + Zębatka + + + + Gear Workbench + Środowisko pracy Zębatka + + + diff --git a/freecad/gears/translations/Gear_zh-TW.qm b/freecad/gears/translations/Gear_zh-TW.qm new file mode 100644 index 0000000..11bc278 Binary files /dev/null and b/freecad/gears/translations/Gear_zh-TW.qm differ diff --git a/freecad/gears/translations/Gear_zh-TW.ts b/freecad/gears/translations/Gear_zh-TW.ts new file mode 100644 index 0000000..6172621 --- /dev/null +++ b/freecad/gears/translations/Gear_zh-TW.ts @@ -0,0 +1,718 @@ + + + + + App::Property + + + + freecad.gears-version + freecad.齒輪-版本 + + + + + + + + + + + + + + number of teeth + 齒數 + + + + + + + + + + + + + + + height + 高度 + + + + pitch_angle + pitch_angle + + + + pressure_angle + pressure_angle + + + + + + + + + module + 模組 + + + + + + + clearance + clearance + + + + + + + + number of points for spline + number of points for spline + + + + if value is true the gears outer face will match the z=0 plane + if value is true the gears outer face will match the z=0 plane + + + + + + + + The arc length on the pitch circle by which the tooth thicknes is reduced. + The arc length on the pitch circle by which the tooth thicknes is reduced. + + + + + + + test + 測試 + + + + angle used for spiral bevel-gears + angle used for spiral bevel-gears + + + + + + + The pitch diameter. + The pitch diameter. + + + + + + + The angle by which this gear can turn without moving the mating gear. + The angle by which this gear can turn without moving the mating gear. + + + + master gear + master gear + + + + slave gear + slave gear + + + + + angle at which second gear is placed + angle at which second gear is placed + + + + number of teeth of other gear + number of teeth of other gear + + + + + + + thickness + 厚度 + + + + + + + + pressure angle + pressure angle + + + + + number of profiles used for loft + number of profiles used for loft + + + + if true no boolean operation is done + if true no boolean operation is done + + + + the python object + the python object + + + + + + + + double helix + double helix + + + + + + + + + beta + beta + + + + + + + + + a fillet for the tooth-head, radius = head_fillet x module + a fillet for the tooth-head, radius = head_fillet x module + + + + + + + + + a fillet for the tooth-root, radius = root_fillet x module + a fillet for the tooth-root, radius = root_fillet x module + + + + + + head_value * module_value = additional length of head + head_value * module_value = additional length of head + + + + + inner_diameter divided by module (hypocycloid) + inner_diameter divided by module (hypocycloid) + + + + + outer_diameter divided by module (epicycloid) + outer_diameter divided by module (epicycloid) + + + + + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + if enabled the rack is drawn with a constant number of teeth to avoid topologic renaming. + + + + + pitch in the transverse plane + pitch in the transverse plane + + + + + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + if enabled the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank + + + + + + + head * module = additional length of head + head * module = additional length of head + + + + + + clearance * module = additional length of root + clearance * module = additional length of root + + + + Pin ball circle radius (overrides Tooth Pitch) + Pin ball circle radius (overrides Tooth Pitch) + + + + Roller Diameter + Roller Diameter + + + + Eccentricity + Eccentricity + + + + Pressure angle limit + Pressure angle limit + + + + Offset in pressure angle + Offset in pressure angle + + + + Number of teeth in Cam + Number of teeth in Cam + + + + Number of points used for spline interpolation + Number of points used for spline interpolation + + + + Center hole's radius + Center hole's radius + + + + Create pins in place + Create pins in place + + + + Center pin Z axis to generated disks + Center pin Z axis to generated disks + + + + Show main cam disk + Show main cam disk + + + + Show another reversed cam disk on top + Show another reversed cam disk on top + + + + + simple + 簡單 + + + + + normal module if properties_from_tool=True, else it's the transverse module. + normal module if properties_from_tool=True, else it's the transverse module. + + + + inside diameter + 內徑 + + + + + root diameter + root diameter + + + + + transverse_pitch + transverse_pitch + + + + Outside diameter + Outside diameter + + + + + backlash direction + backlash direction + + + + + shift + shift + + + + + + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + if beta is given and properties_from_tool is enabled, gear parameters are internally recomputed for the rotated gear + + + + python gear object + python gear object + + + + undercut + undercut + + + + outside diameter + outside diameter + + + + traverse module of the generated gear + traverse module of the generated gear + + + + the bolt radius of the rack/chain + the bolt radius of the rack/chain + + + + type of timing-gear + type of timing-gear + + + + + pitch of gear + pitch of gear + + + + radial height of teeth + radial height of teeth + + + + radial difference between pitch diameter and head of gear + radial difference between pitch diameter and head of gear + + + + radius of first arc + radius of first arc + + + + radius of second arc + radius of second arc + + + + radius of third arc + radius of third arc + + + + x-offset of second arc-midpoint + x-offset of second arc-midpoint + + + + radial height of tooth + radial height of tooth + + + + radial distance from tooth-head to pitch circle + radial distance from tooth-head to pitch circle + + + + angle of tooth flanks + angle of tooth flanks + + + + extrusion height + extrusion height + + + + diameter + diameter + + + + reverse rotation of helix + reverse rotation of helix + + + + FCGear_BevelGear + + + Bevel Gear + Bevel Gear + + + + Create a Bevel gear + Create a Bevel gear + + + + FCGear_CrownGear + + + Crown Gear + Crown Gear + + + + Create a Crown gear + Create a Crown gear + + + + FCGear_CycloidGear + + + Cycloid Gear + Cycloid Gear + + + + Create a Cycloid gear + Create a Cycloid gear + + + + FCGear_CycloidRack + + + Cycloid Rack + Cycloid Rack + + + + Create an Cycloid rack + Create an Cycloid rack + + + + FCGear_GearConnector + + + + Combine two gears + Combine two gears + + + + FCGear_HypoCycloidGear + + + HypoCycloid Gear + HypoCycloid Gear + + + + Create a HypoCycloid gear with its pins + Create a HypoCycloid gear with its pins + + + + FCGear_InternalInvoluteGear + + + Internal Involute Gear + Internal Involute Gear + + + + Create an internal involute gear + Create an internal involute gear + + + + FCGear_InvoluteGear + + + Involute Gear + Involute Gear + + + + Create an external involute gear + Create an external involute gear + + + + FCGear_InvoluteRack + + + Involute Rack + Involute Rack + + + + Create an Involute rack + Create an Involute rack + + + + FCGear_LanternGear + + + Lantern Gear + Lantern Gear + + + + Create a Lantern gear + Create a Lantern gear + + + + FCGear_TimingGear + + + Timing Gear + Timing Gear + + + + Create a Timing gear + Create a Timing gear + + + + FCGear_TimingGearT + + + Timing Gear T-shape + Timing Gear T-shape + + + + Create a Timing gear T-shape + Create a Timing gear T-shape + + + + FCGear_WormGear + + + Worm Gear + Worm Gear + + + + Create a Worm gear + Create a Worm gear + + + + Log + + + Please select two gear objects. + Please select two gear objects. + + + + Selected object is not a gear. + Selected object is not a gear. + + + + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth. + + + + Generating cam disk + + Generating cam disk + + + + + Generating secondary cam disk + + Generating secondary cam disk + + + + + Generating pins + + Generating pins + + + + + Checking FreeCAD version + + Checking FreeCAD version + + + + + FreeCAD version (currently {}.{}.{} ({})) must be at least {}.{}.{} ({}) in order to work with Python 3.11 and above + + FreeCAD version (currently {}.{}.{} ({})) must be at least {}.{}.{} ({}) in order to work with Python 3.11 and above + + + + + Migrating 'teeth' property to 'num_teeth' on {} part + + Migrating 'teeth' property to 'num_teeth' on {} part + + + + + Workbench + + + + + Gear + Gear + + + + Gear Workbench + Gear Workbench + + + diff --git a/freecad/gears/translations/update_translation.sh b/freecad/gears/translations/update_translation.sh index 37f6f7d..0f9a997 100755 --- a/freecad/gears/translations/update_translation.sh +++ b/freecad/gears/translations/update_translation.sh @@ -73,7 +73,7 @@ update_locale() { if [ "$u" == "" ]; then $LUPDATE ../*.py -ts "${WB}.ts" # locale-agnostic file else - $LUPDATE ../*.py -source-language en -target-language "${locale//-/_}" \ + $LUPDATE ../*.py -source-language en_US -target-language "${locale//-/_}" \ -ts "${WB}_${locale}.ts" fi } @@ -105,7 +105,7 @@ if [ $# -eq 1 ]; then if [ "$1" == "-R" ]; then find . -type f -name '*_*.ts' | while IFS= read -r file; do # Release all locales - $LRELEASE "$file" + $LRELEASE -nounfinished "$file" echo done elif [ "$1" == "-U" ]; then @@ -119,7 +119,7 @@ elif [ $# -eq 2 ]; then if is_locale_supported "$LOCALE"; then if [ "$1" == "-r" ]; then # Release locale (creation of *.qm file from *.ts file) - $LRELEASE "${WB}_${LOCALE}.ts" + $LRELEASE -nounfinished "${WB}_${LOCALE}.ts" elif [ "$1" == "-u" ]; then # Update main & locale files update_locale