Translations: updated ts files

src/Mod/Arch/Resources/translations/Arch.ts

@@ -4459,6 +4459,11 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
         <source>Custom Rebar</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location filename="ArchRebar.py" line="108"/>
+        <source>Creates a Reinforcement bar from the selected face of solid object and/or a sketch</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="ArchRebar.py" line="108"/>
         <source>Creates a Reinforcement bar from the selected face of a structural object</source>

src/Mod/Draft/Resources/translations/Draft.ts

@@ -635,11 +635,6 @@ This property is read-only, as the number depends on the points contained within
         <source>Area of this object</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <location filename="hatch.py" line="49"/>
-        <source>The shape of this object</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <location filename="hatch.py" line="52"/>
         <source>The base object used by this object</source>
@@ -650,6 +645,11 @@ This property is read-only, as the number depends on the points contained within
         <source>The PAT file used by this object</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location filename="hatch.py" line="49"/>
+        <source>The shape of this object</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="hatch.py" line="58"/>
         <source>The pattern name used by this object</source>

src/Mod/Path/Gui/Resources/translations/Path.ts

@@ -713,16 +713,6 @@
         <source>Expression used for StepDown of new operations.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <location filename="PathPocketBase.py" line="71"/>
-        <source>The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="PathPocketBase.py" line="72"/>
-        <source>Extra offset to apply to the operation. Direction is operation dependent.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <location filename="PathPocketBase.py" line="73"/>
         <source>Start pocketing at center or boundary</source>
@@ -733,6 +723,16 @@
         <source>Percent of cutter diameter to step over on each pass</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location filename="PathPocketBase.py" line="71"/>
+        <source>The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathPocketBase.py" line="72"/>
+        <source>Extra offset to apply to the operation. Direction is operation dependent.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="PathPocketBase.py" line="75"/>
         <source>Angle of the zigzag pattern</source>
@@ -1568,6 +1568,16 @@
 </context>
 <context>
     <name>PathJob</name>
+    <message>
+        <location filename="PathJobGui.py" line="1258"/>
+        <source>Unsupported stock object %s</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1274"/>
+        <source>Unsupported stock type %s (%d)</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="PathJobGui.py" line="387"/>
         <source>Stock not from Base bound box!</source>
@@ -1583,16 +1593,6 @@
         <source>Stock not a cylinder!</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <location filename="PathJobGui.py" line="1258"/>
-        <source>Unsupported stock object %s</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="PathJobGui.py" line="1274"/>
-        <source>Unsupported stock type %s (%d)</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <location filename="PathJob.py" line="112"/>
         <source>The NC output file for this project</source>
@@ -1737,14 +1737,14 @@
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="PathOpGui.py" line="848"/>
-        <source>FinalDepth cannot be modified for this operation.
-If it is necessary to set the FinalDepth manually please select a different operation.</source>
+        <location filename="PathOpGui.py" line="855"/>
+        <source>Heights</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="PathOpGui.py" line="855"/>
-        <source>Heights</source>
+        <location filename="PathOpGui.py" line="848"/>
+        <source>FinalDepth cannot be modified for this operation.
+If it is necessary to set the FinalDepth manually please select a different operation.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -3389,6 +3389,36 @@ Aborting op creation</source>
         <source>Create Job</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location filename="PathJobGui.py" line="1595"/>
+        <source>Warning</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1596"/>
+        <source>Please add one.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1597"/>
+        <source>Ok</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1599"/>
+        <source>Add</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1610"/>
+        <source>This job has no base model.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="PathJobGui.py" line="1617"/>
+        <source>This job has no tool.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location filename="PathJob.py" line="257"/>
         <source>Fixture</source>