kindred/create
1
1
Fork 0
Code Issues 44 Pull Requests Actions 1 Packages Projects 9 Releases 2 Wiki Activity

Updated ts files

Browse Source
This commit is contained in:
Yorik van Havre
2021-06-04 18:30:30 +02:00
parent fe101ff1b1
commit 3e98ff41f9
6 changed files with 433 additions and 455 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
src/Mod/Draft/Resources/translations/Draft.ts
View File

@@ -1546,6 +1546,11 @@ The array can be turned into a polar or a circular array by changing its type.</
<source>Error: json module not found. Unable to save style</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_setstyle.py" line="267"/>
<source>Warning</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DraftCircularArrayTaskPanel</name>
@@ -2381,9 +2386,6 @@ Objects added to this layer can share the same visual properties such as line co
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Draft_Lineremover</name>
</context>
<context>
<name>Draft_LinkArray</name>
<message>
@@ -6272,22 +6274,22 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit_draft_objects.py" line="509"/>
<location filename="gui_edit_draft_objects.py" line="569"/>
<source>This object does not support possible coincident points, please try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit_draft_objects.py" line="559"/>
<location filename="gui_edit_draft_objects.py" line="608"/>
<source>Active object must have more than two points/nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit_draft_objects.py" line="673"/>
<location filename="gui_edit_draft_objects.py" line="722"/>
<source>Selection is not a Knot</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit_draft_objects.py" line="700"/>
<location filename="gui_edit_draft_objects.py" line="749"/>
<source>Endpoint of BezCurve can&apos;t be smoothed</source>
<translation type="unfinished"></translation>
</message>
@@ -6627,7 +6629,7 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_stretch.py" line="472"/>
<location filename="gui_stretch.py" line="474"/>
<source>Stretch</source>
<translation type="unfinished"></translation>
</message>
@@ -6727,12 +6729,12 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit.py" line="561"/>
<location filename="gui_edit.py" line="563"/>
<source>No edit point found for selected object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit.py" line="942"/>
<location filename="gui_edit.py" line="823"/>
<source>: this object is not editable</source>
<translation type="unfinished"></translation>
</message>
@@ -7166,7 +7168,7 @@ Not available if Draft preference option &apos;Use Part Primitives&apos; is enab
<translation type="unfinished"></translation>
</message>
<message>
<location filename="gui_edit.py" line="934"/>
<location filename="gui_edit.py" line="815"/>
<source>Too many objects selected, max number set to:</source>
<translation type="unfinished"></translation>
</message>

15
src/Mod/Fem/Gui/Resources/translations/Fem.ts
View File

@@ -74,11 +74,6 @@
<source>Geometry reference selector for a</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
<source>Geometry reference selector for a </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="251"/>
<source>Add</source>
@@ -94,6 +89,11 @@
<source>Click on &quot;Add&quot; and select geometric elements to add them to the list.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="selection_widgets.py" line="285"/>
<source>Click on &quot;Add&quot; and select geometric elements to add to the list.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="selection_widgets.py" line="285"/>
<source>Click on &apos;Add&apos; and select geometric elements to add them to the list.</source>
@@ -119,6 +119,11 @@
<source>Solid</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
<source>Geometry reference selector for a </source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SolidSelector</name>

20
src/Mod/Part/Gui/Resources/translations/Part.ts
View File

@@ -248,6 +248,16 @@ It will create a &apos;Compound Filter&apos; for each shape.</source>
</context>
<context>
<name>Part_SplitFeatures</name>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
<source>Boolean Fragments</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
<source>Split objects where they intersect</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="188"/>
<source>Boolean fragments</source>
@@ -325,16 +335,6 @@ Click &apos;Continue&apos; to create the feature anyway, or &apos;Abort&apos; to
<source>Slice to compound</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
<source>Boolean Fragments</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
<source>Split objects where they intersect</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="349"/>
<source>Slice a selected object by using other objects as cutting tools.

10
src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
View File

@@ -3264,11 +3264,6 @@ click again to end selection</source>
<source>Cannot use this command as there is no solid to subtract from.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../Command.cpp" line="1057"/>
<source>Ensure that the body contains a feature before attempting a subtractive command.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../Command.cpp" line="1078"/>
<source>Cannot use selected object. Selected object must belong to the active body</source>
@@ -3328,6 +3323,11 @@ click again to end selection</source>
<source>Selection is not in Active Body</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../Command.cpp" line="1057"/>
<source>Ensure that the body contains a feature before attempting a subtractive command.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../Command.cpp" line="1849"/>
<source>Wrong object type</source>

411
src/Mod/Path/Gui/Resources/translations/Path.ts
View File

@@ -28,11 +28,51 @@
<source>Dropcutter lines are created parallel to this axis.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
<source>The direction along which dropcutter lines are created</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="75"/>
<source>Additional offset to the selected bounding box</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
<source>Step over percentage of the drop cutter path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
<source>Z-axis offset from the surface of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
<source>The Sample Interval. Small values cause long wait times</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
<source>Enable optimization which removes unnecessary points from G-Code output</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
<source>The completion mode for the operation: single or multi-pass</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="132"/>
<source>The model will be rotated around this axis.</source>
@@ -43,6 +83,21 @@
<source>Start index(angle) for rotational scan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
<source>Ignore areas that proceed below specified depth.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
<source>Depth used to identify waste areas to ignore.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
<source>Cut through waste to depth at model edge, releasing the model.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="128"/>
<source>Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan.</source>
@@ -188,11 +243,6 @@
<source>The path to be copied</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathProfileEdges.py" line="56"/>
<source>The base geometry of this toolpath</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathProfileEdges.py" line="70"/>
<source>The tool controller that will be used to calculate the path</source>
@@ -508,6 +558,11 @@
<source>Extra offset to apply to the operation. Direction is operation dependent.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="55"/>
<source>The library to use to generate the path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="78"/>
<source>Start pocketing at center or boundary</source>
@@ -649,58 +704,8 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
<source>The direction along which dropcutter lines are created</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
<source>Step over percentage of the drop cutter path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
<source>Z-axis offset from the surface of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
<source>The Sample Interval. Small values cause long wait times</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
<source>Enable optimization which removes unnecessary points from G-Code output</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
<source>The completion mode for the operation: single or multi-pass</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
<source>Ignore areas that proceed below specified depth.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
<source>Depth used to identify waste areas to ignore.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
<source>Cut through waste to depth at model edge, releasing the model.</source>
<location filename="PathProfileEdges.py" line="56"/>
<source>The base geometry of this toolpath</source>
<translation type="unfinished"></translation>
</message>
<message>
@@ -728,11 +733,6 @@
<source>Enforce the Z-depth of the selected face as the lowest value for final depth. Higher user values will be observed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="55"/>
<source>The library to use to generate the path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfile.py" line="104"/>
<source>Extend the profile clearing beyond the Extra Offset.</source>
@@ -987,13 +987,13 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
<source>Invalid Cutting Edge Angle %.2f, must be &gt;0° and &lt;=180°</source>
<location filename="PathUtils.py" line="762"/>
<source>Invalid Cutting Edge Angle %.2f, must be &lt;90° and &gt;=0°</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathUtils.py" line="762"/>
<source>Invalid Cutting Edge Angle %.2f, must be &lt;90° and &gt;=0°</source>
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
<source>Invalid Cutting Edge Angle %.2f, must be &gt;0° and &lt;=180°</source>
<translation type="unfinished"></translation>
</message>
<message>
@@ -1121,6 +1121,32 @@
<source>Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="277"/>
<source>Rotated to &apos;InverseAngle&apos; to attempt access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="331"/>
<source>Always select the bottom edge of the hole when using an edge.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="781"/>
<source>Start depth &lt;= face depth.
Increased to stock top.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="847"/>
<source>Selected feature(s) require &apos;Enable Rotation: A(x)&apos; for access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="852"/>
<source>Selected feature(s) require &apos;Enable Rotation: B(y)&apos; for access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathCircularHoleBase.py" line="120"/>
<source>Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list.</source>
@@ -1131,6 +1157,31 @@
<source>Ignoring non-horizontal Face</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
<source>Face appears misaligned after initial rotation.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
<source>Consider toggling the &apos;InverseAngle&apos; property and recomputing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
<source>Multiple faces in Base Geometry.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
<source>Depth settings will be applied to all faces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
<source>EnableRotation property is &apos;Off&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="250"/>
<source>Unable to create path for face(s).</source>
@@ -1250,31 +1301,6 @@
<source>Selected faces form loop. Processing looped faces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
<source>Face appears misaligned after initial rotation.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
<source>Consider toggling the &apos;InverseAngle&apos; property and recomputing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
<source>Multiple faces in Base Geometry.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
<source>Depth settings will be applied to all faces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
<source>EnableRotation property is &apos;Off&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfile.py" line="575"/>
<source>Applying inverse angle automatically.</source>
@@ -1290,32 +1316,6 @@
<source>Rotated to inverse angle.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="277"/>
<source>Rotated to &apos;InverseAngle&apos; to attempt access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="331"/>
<source>Always select the bottom edge of the hole when using an edge.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="781"/>
<source>Start depth &lt;= face depth.
Increased to stock top.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="847"/>
<source>Selected feature(s) require &apos;Enable Rotation: A(x)&apos; for access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathCircularHoleBase.py" line="852"/>
<source>Selected feature(s) require &apos;Enable Rotation: B(y)&apos; for access.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="153"/>
<source>this object already in the list
@@ -1958,6 +1958,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Final depth set below ZMin of face(s) selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Pocket Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Creates a Path Pocket object from a face or faces</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="144"/>
<source>Normal</source>
@@ -1973,16 +1983,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Pocket Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Creates a Path Pocket object from a face or faces</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketGui.py" line="44"/>
<source>3D Pocket</source>
@@ -2863,11 +2863,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Set thread&apos;s tpi - used for imperial threads</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathThreadMilling.py" line="186"/>
<source>Defines which standard thread was chosen</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathThreadMilling.py" line="187"/>
<source>Set thread&apos;s major diameter</source>
@@ -3398,16 +3393,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>Path_Dressup</name>
<message>
<location filename="PathDressup.py" line="98"/>
<source>Dress-up</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="100"/>
<source>Creates a Path Dess-up object from a selected path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="110"/>
<source>Please select one path object
@@ -3425,6 +3410,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Please select a Path object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="98"/>
<source>Dress-up</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="100"/>
<source>Creates a Path Dess-up object from a selected path</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_DressupAxisMap</name>
@@ -3897,6 +3892,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Creates a Path Hop object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathHop.py" line="119"/>
<source>The selected object is not a path
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathHop.py" line="111"/>
<source>Please select one path object</source>
@@ -3912,12 +3913,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Create Hop</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathHop.py" line="119"/>
<source>The selected object is not a path
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_Inspect</name>
@@ -4244,6 +4239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Minimum Z Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
<source>The Job has no selected Base object.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="224"/>
<source>Maximum Z Height</source>
@@ -4414,11 +4414,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Date</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
<source>The Job has no selected Base object.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathSanity.py" line="50"/>
<source>It appears the machine limits haven&apos;t been set. Not able to check path extents.
@@ -4574,6 +4569,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>Path_ToolController</name>
<message>
<location filename="PathToolController.py" line="132"/>
<source>Tool Number to Load</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolController.py" line="156"/>
<source>Add Tool Controller to the Job</source>
@@ -4584,11 +4584,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Add Tool Controller</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolController.py" line="132"/>
<source>Tool Number to Load</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_ToolTable</name>
@@ -4615,6 +4610,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Creates a medial line engraving path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="309"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
@@ -4625,11 +4625,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Engraver Cutting Edge Angle must be &lt; 180 degrees.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_Waterline</name>
@@ -4664,11 +4659,56 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Save toolbit library</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
<source>Tooltable JSON (*.json)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
<source>HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
<source>LinuxCNC tooltable (*.tbl)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="512"/>
<source>Open tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Save tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Rename Tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Enter Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
<source>Add New Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
<source>Delete Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
<source>Rename Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="388"/>
<source>Tooltable editor</source>
@@ -4879,11 +4919,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Save tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Tooltable XML (*.xml)</source>
@@ -4899,46 +4934,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Object doesn&apos;t have a tooltable property</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Rename Tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Enter Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
<source>Add New Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
<source>Delete Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
<source>Rename Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
<source>Tooltable JSON (*.json)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
<source>HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
<source>LinuxCNC tooltable (*.tbl)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolLibraryManager.py" line="514"/>
<source>Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl)</source>

408
src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts
View File

@@ -186,27 +186,27 @@
<context>
<name>CmdSketcherCompConstrainRadDia</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5848"/>
<location filename="../../CommandConstraints.cpp" line="5684"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5849"/>
<location filename="../../CommandConstraints.cpp" line="5685"/>
<source>Constrain arc or circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5850"/>
<location filename="../../CommandConstraints.cpp" line="5686"/>
<source>Constrain an arc or a circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5942"/>
<location filename="../../CommandConstraints.cpp" line="5778"/>
<source>Constrain radius</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5946"/>
<location filename="../../CommandConstraints.cpp" line="5782"/>
<source>Constrain diameter</source>
<translation type="unfinished"></translation>
</message>
@@ -476,17 +476,17 @@
<context>
<name>CmdSketcherConstrainAngle</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5975"/>
<location filename="../../CommandConstraints.cpp" line="5811"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5976"/>
<location filename="../../CommandConstraints.cpp" line="5812"/>
<source>Constrain angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5977"/>
<location filename="../../CommandConstraints.cpp" line="5813"/>
<source>Fix the angle of a line or the angle between two lines</source>
<translation type="unfinished"></translation>
</message>
@@ -530,17 +530,17 @@
<context>
<name>CmdSketcherConstrainDiameter</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5393"/>
<location filename="../../CommandConstraints.cpp" line="5229"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5394"/>
<location filename="../../CommandConstraints.cpp" line="5230"/>
<source>Constrain diameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5395"/>
<location filename="../../CommandConstraints.cpp" line="5231"/>
<source>Fix the diameter of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
@@ -602,17 +602,17 @@
<context>
<name>CmdSketcherConstrainEqual</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6502"/>
<location filename="../../CommandConstraints.cpp" line="6338"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6503"/>
<location filename="../../CommandConstraints.cpp" line="6339"/>
<source>Constrain equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6504"/>
<location filename="../../CommandConstraints.cpp" line="6340"/>
<source>Create an equality constraint between two lines or between circles and arcs</source>
<translation type="unfinished"></translation>
</message>
@@ -638,17 +638,17 @@
<context>
<name>CmdSketcherConstrainInternalAlignment</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7183"/>
<location filename="../../CommandConstraints.cpp" line="7019"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7184"/>
<location filename="../../CommandConstraints.cpp" line="7020"/>
<source>Constrain internal alignment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7185"/>
<location filename="../../CommandConstraints.cpp" line="7021"/>
<source>Constrains an element to be aligned with the internal geometry of another element</source>
<translation type="unfinished"></translation>
</message>
@@ -747,17 +747,17 @@ on the selected vertex</source>
<context>
<name>CmdSketcherConstrainSnellsLaw</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7019"/>
<location filename="../../CommandConstraints.cpp" line="6855"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7020"/>
<location filename="../../CommandConstraints.cpp" line="6856"/>
<source>Constrain refraction (Snell&apos;s law&apos;)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7021"/>
<location filename="../../CommandConstraints.cpp" line="6857"/>
<source>Create a refraction law (Snell&apos;s law) constraint between two endpoints of rays
and an edge as an interface.</source>
<translation type="unfinished"></translation>
@@ -766,17 +766,17 @@ and an edge as an interface.</source>
<context>
<name>CmdSketcherConstrainSymmetric</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6719"/>
<location filename="../../CommandConstraints.cpp" line="6555"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6720"/>
<location filename="../../CommandConstraints.cpp" line="6556"/>
<source>Constrain symmetrical</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6721"/>
<location filename="../../CommandConstraints.cpp" line="6557"/>
<source>Create a symmetry constraint between two points
with respect to a line or a third point</source>
<translation type="unfinished"></translation>
@@ -1933,17 +1933,17 @@ This will clear the &apos;Support&apos; property, if any.</source>
<context>
<name>CmdSketcherToggleActiveConstraint</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7770"/>
<location filename="../../CommandConstraints.cpp" line="7606"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7771"/>
<location filename="../../CommandConstraints.cpp" line="7607"/>
<source>Activate/deactivate constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7772"/>
<location filename="../../CommandConstraints.cpp" line="7608"/>
<source>Activates or deactivates the selected constraints</source>
<translation type="unfinished"></translation>
</message>
@@ -1969,17 +1969,17 @@ This will clear the &apos;Support&apos; property, if any.</source>
<context>
<name>CmdSketcherToggleDrivingConstraint</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7644"/>
<location filename="../../CommandConstraints.cpp" line="7480"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7645"/>
<location filename="../../CommandConstraints.cpp" line="7481"/>
<source>Toggle driving/reference constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7646"/>
<location filename="../../CommandConstraints.cpp" line="7482"/>
<source>Set the toolbar, or the selected constraints,
into driving or reference mode</source>
<translation type="unfinished"></translation>
@@ -2253,64 +2253,64 @@ invalid constraints, degenerated geometry, etc.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="4999"/>
<location filename="../../CommandConstraints.cpp" line="5064"/>
<location filename="../../CommandConstraints.cpp" line="5083"/>
<location filename="../../CommandConstraints.cpp" line="5241"/>
<location filename="../../CommandConstraints.cpp" line="5000"/>
<location filename="../../CommandConstraints.cpp" line="5050"/>
<location filename="../../CommandConstraints.cpp" line="5069"/>
<location filename="../../CommandConstraints.cpp" line="5147"/>
<source>Add radius constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5500"/>
<location filename="../../CommandConstraints.cpp" line="5559"/>
<location filename="../../CommandConstraints.cpp" line="5571"/>
<location filename="../../CommandConstraints.cpp" line="5726"/>
<location filename="../../CommandConstraints.cpp" line="5336"/>
<location filename="../../CommandConstraints.cpp" line="5395"/>
<location filename="../../CommandConstraints.cpp" line="5407"/>
<location filename="../../CommandConstraints.cpp" line="5562"/>
<source>Add diameter constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6067"/>
<location filename="../../CommandConstraints.cpp" line="6200"/>
<location filename="../../CommandConstraints.cpp" line="6230"/>
<location filename="../../CommandConstraints.cpp" line="6254"/>
<location filename="../../CommandConstraints.cpp" line="6367"/>
<location filename="../../CommandConstraints.cpp" line="6421"/>
<location filename="../../CommandConstraints.cpp" line="5903"/>
<location filename="../../CommandConstraints.cpp" line="6036"/>
<location filename="../../CommandConstraints.cpp" line="6066"/>
<location filename="../../CommandConstraints.cpp" line="6090"/>
<location filename="../../CommandConstraints.cpp" line="6203"/>
<location filename="../../CommandConstraints.cpp" line="6257"/>
<source>Add angle constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6635"/>
<location filename="../../CommandConstraints.cpp" line="6687"/>
<location filename="../../CommandConstraints.cpp" line="6471"/>
<location filename="../../CommandConstraints.cpp" line="6523"/>
<source>Add equality constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6808"/>
<location filename="../../CommandConstraints.cpp" line="6860"/>
<location filename="../../CommandConstraints.cpp" line="6876"/>
<location filename="../../CommandConstraints.cpp" line="6962"/>
<location filename="../../CommandConstraints.cpp" line="6997"/>
<location filename="../../CommandConstraints.cpp" line="6644"/>
<location filename="../../CommandConstraints.cpp" line="6696"/>
<location filename="../../CommandConstraints.cpp" line="6712"/>
<location filename="../../CommandConstraints.cpp" line="6798"/>
<location filename="../../CommandConstraints.cpp" line="6833"/>
<source>Add symmetric constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7136"/>
<location filename="../../CommandConstraints.cpp" line="6972"/>
<source>Add Snell&apos;s law constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7345"/>
<location filename="../../CommandConstraints.cpp" line="7523"/>
<location filename="../../CommandConstraints.cpp" line="7181"/>
<location filename="../../CommandConstraints.cpp" line="7359"/>
<source>Add internal alignment constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7729"/>
<location filename="../../CommandConstraints.cpp" line="7565"/>
<source>Toggle constraint to driving/reference</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7813"/>
<location filename="../../CommandConstraints.cpp" line="7649"/>
<source>Activate/Deactivate constraint</source>
<translation type="unfinished"></translation>
</message>
@@ -2779,57 +2779,57 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="4911"/>
<location filename="../../CommandConstraints.cpp" line="4922"/>
<location filename="../../CommandConstraints.cpp" line="4983"/>
<location filename="../../CommandConstraints.cpp" line="4988"/>
<location filename="../../CommandConstraints.cpp" line="5235"/>
<location filename="../../CommandConstraints.cpp" line="5422"/>
<location filename="../../CommandConstraints.cpp" line="5433"/>
<location filename="../../CommandConstraints.cpp" line="5475"/>
<location filename="../../CommandConstraints.cpp" line="5490"/>
<location filename="../../CommandConstraints.cpp" line="5714"/>
<location filename="../../CommandConstraints.cpp" line="5720"/>
<location filename="../../CommandConstraints.cpp" line="6017"/>
<location filename="../../CommandConstraints.cpp" line="6029"/>
<location filename="../../CommandConstraints.cpp" line="6060"/>
<location filename="../../CommandConstraints.cpp" line="6122"/>
<location filename="../../CommandConstraints.cpp" line="6218"/>
<location filename="../../CommandConstraints.cpp" line="6274"/>
<location filename="../../CommandConstraints.cpp" line="6414"/>
<location filename="../../CommandConstraints.cpp" line="6531"/>
<location filename="../../CommandConstraints.cpp" line="6544"/>
<location filename="../../CommandConstraints.cpp" line="6560"/>
<location filename="../../CommandConstraints.cpp" line="6565"/>
<location filename="../../CommandConstraints.cpp" line="6584"/>
<location filename="../../CommandConstraints.cpp" line="6614"/>
<location filename="../../CommandConstraints.cpp" line="6629"/>
<location filename="../../CommandConstraints.cpp" line="6681"/>
<location filename="../../CommandConstraints.cpp" line="6763"/>
<location filename="../../CommandConstraints.cpp" line="6776"/>
<location filename="../../CommandConstraints.cpp" line="6801"/>
<location filename="../../CommandConstraints.cpp" line="6823"/>
<location filename="../../CommandConstraints.cpp" line="6853"/>
<location filename="../../CommandConstraints.cpp" line="6890"/>
<location filename="../../CommandConstraints.cpp" line="6913"/>
<location filename="../../CommandConstraints.cpp" line="6955"/>
<location filename="../../CommandConstraints.cpp" line="6971"/>
<location filename="../../CommandConstraints.cpp" line="7098"/>
<location filename="../../CommandConstraints.cpp" line="7104"/>
<location filename="../../CommandConstraints.cpp" line="7203"/>
<location filename="../../CommandConstraints.cpp" line="7216"/>
<location filename="../../CommandConstraints.cpp" line="7237"/>
<location filename="../../CommandConstraints.cpp" line="7260"/>
<location filename="../../CommandConstraints.cpp" line="7282"/>
<location filename="../../CommandConstraints.cpp" line="7290"/>
<location filename="../../CommandConstraints.cpp" line="4989"/>
<location filename="../../CommandConstraints.cpp" line="5141"/>
<location filename="../../CommandConstraints.cpp" line="5258"/>
<location filename="../../CommandConstraints.cpp" line="5269"/>
<location filename="../../CommandConstraints.cpp" line="5311"/>
<location filename="../../CommandConstraints.cpp" line="5326"/>
<location filename="../../CommandConstraints.cpp" line="5550"/>
<location filename="../../CommandConstraints.cpp" line="5556"/>
<location filename="../../CommandConstraints.cpp" line="5853"/>
<location filename="../../CommandConstraints.cpp" line="5865"/>
<location filename="../../CommandConstraints.cpp" line="5896"/>
<location filename="../../CommandConstraints.cpp" line="5958"/>
<location filename="../../CommandConstraints.cpp" line="6054"/>
<location filename="../../CommandConstraints.cpp" line="6110"/>
<location filename="../../CommandConstraints.cpp" line="6250"/>
<location filename="../../CommandConstraints.cpp" line="6367"/>
<location filename="../../CommandConstraints.cpp" line="6380"/>
<location filename="../../CommandConstraints.cpp" line="6396"/>
<location filename="../../CommandConstraints.cpp" line="6401"/>
<location filename="../../CommandConstraints.cpp" line="6420"/>
<location filename="../../CommandConstraints.cpp" line="6450"/>
<location filename="../../CommandConstraints.cpp" line="6465"/>
<location filename="../../CommandConstraints.cpp" line="6517"/>
<location filename="../../CommandConstraints.cpp" line="6599"/>
<location filename="../../CommandConstraints.cpp" line="6612"/>
<location filename="../../CommandConstraints.cpp" line="6637"/>
<location filename="../../CommandConstraints.cpp" line="6659"/>
<location filename="../../CommandConstraints.cpp" line="6689"/>
<location filename="../../CommandConstraints.cpp" line="6726"/>
<location filename="../../CommandConstraints.cpp" line="6749"/>
<location filename="../../CommandConstraints.cpp" line="6791"/>
<location filename="../../CommandConstraints.cpp" line="6807"/>
<location filename="../../CommandConstraints.cpp" line="6934"/>
<location filename="../../CommandConstraints.cpp" line="6940"/>
<location filename="../../CommandConstraints.cpp" line="7039"/>
<location filename="../../CommandConstraints.cpp" line="7052"/>
<location filename="../../CommandConstraints.cpp" line="7073"/>
<location filename="../../CommandConstraints.cpp" line="7096"/>
<location filename="../../CommandConstraints.cpp" line="7118"/>
<location filename="../../CommandConstraints.cpp" line="7126"/>
<location filename="../../CommandConstraints.cpp" line="7132"/>
<location filename="../../CommandConstraints.cpp" line="7288"/>
<location filename="../../CommandConstraints.cpp" line="7296"/>
<location filename="../../CommandConstraints.cpp" line="7452"/>
<location filename="../../CommandConstraints.cpp" line="7460"/>
<location filename="../../CommandConstraints.cpp" line="7468"/>
<location filename="../../CommandConstraints.cpp" line="7474"/>
<location filename="../../CommandConstraints.cpp" line="7623"/>
<location filename="../../CommandConstraints.cpp" line="7683"/>
<location filename="../../CommandConstraints.cpp" line="7691"/>
<location filename="../../CommandConstraints.cpp" line="7723"/>
<location filename="../../CommandConstraints.cpp" line="7796"/>
<location filename="../../CommandConstraints.cpp" line="7807"/>
<location filename="../../CommandConstraints.cpp" line="7304"/>
<location filename="../../CommandConstraints.cpp" line="7310"/>
<location filename="../../CommandConstraints.cpp" line="7459"/>
<location filename="../../CommandConstraints.cpp" line="7519"/>
<location filename="../../CommandConstraints.cpp" line="7527"/>
<location filename="../../CommandConstraints.cpp" line="7559"/>
<location filename="../../CommandConstraints.cpp" line="7632"/>
<location filename="../../CommandConstraints.cpp" line="7643"/>
<location filename="../../CommandSketcherBSpline.cpp" line="431"/>
<location filename="../../CommandSketcherBSpline.cpp" line="502"/>
<location filename="../../CommandSketcherBSpline.cpp" line="580"/>
@@ -2867,10 +2867,8 @@ invalid constraints, degenerated geometry, etc.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5180"/>
<location filename="../../CommandConstraints.cpp" line="5329"/>
<location filename="../../CommandConstraints.cpp" line="5659"/>
<location filename="../../CommandConstraints.cpp" line="5795"/>
<location filename="../../CommandConstraints.cpp" line="5495"/>
<location filename="../../CommandConstraints.cpp" line="5631"/>
<location filename="../../EditDatumDialog.cpp" line="218"/>
<source>Dimensional constraint</source>
<translation type="unfinished"></translation>
@@ -3032,7 +3030,7 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="4136"/>
<location filename="../../CommandConstraints.cpp" line="4349"/>
<location filename="../../CommandConstraints.cpp" line="4846"/>
<location filename="../../CommandConstraints.cpp" line="7166"/>
<location filename="../../CommandConstraints.cpp" line="7002"/>
<location filename="../../CommandSketcherBSpline.cpp" line="833"/>
<source>Error</source>
<translation type="unfinished"></translation>
@@ -3079,8 +3077,8 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="2920"/>
<location filename="../../CommandConstraints.cpp" line="3172"/>
<location filename="../../CommandConstraints.cpp" line="4912"/>
<location filename="../../CommandConstraints.cpp" line="5423"/>
<location filename="../../CommandConstraints.cpp" line="6018"/>
<location filename="../../CommandConstraints.cpp" line="5259"/>
<location filename="../../CommandConstraints.cpp" line="5854"/>
<source>Select the right things from the sketch.</source>
<translation type="unfinished"></translation>
</message>
@@ -3113,12 +3111,12 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="4439"/>
<location filename="../../CommandConstraints.cpp" line="4637"/>
<location filename="../../CommandConstraints.cpp" line="4818"/>
<location filename="../../CommandConstraints.cpp" line="5476"/>
<location filename="../../CommandConstraints.cpp" line="5721"/>
<location filename="../../CommandConstraints.cpp" line="6061"/>
<location filename="../../CommandConstraints.cpp" line="6123"/>
<location filename="../../CommandConstraints.cpp" line="6415"/>
<location filename="../../CommandConstraints.cpp" line="7105"/>
<location filename="../../CommandConstraints.cpp" line="5312"/>
<location filename="../../CommandConstraints.cpp" line="5557"/>
<location filename="../../CommandConstraints.cpp" line="5897"/>
<location filename="../../CommandConstraints.cpp" line="5959"/>
<location filename="../../CommandConstraints.cpp" line="6251"/>
<location filename="../../CommandConstraints.cpp" line="6941"/>
<source>Select an edge that is not a B-spline weight</source>
<translation type="unfinished"></translation>
</message>
@@ -3168,7 +3166,7 @@ invalid constraints, degenerated geometry, etc.</source>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="3431"/>
<location filename="../../CommandConstraints.cpp" line="6545"/>
<location filename="../../CommandConstraints.cpp" line="6381"/>
<source>Select at least two lines from the sketch.</source>
<translation type="unfinished"></translation>
</message>
@@ -3291,222 +3289,216 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<message>
<location filename="../../CommandConstraints.cpp" line="4923"/>
<location filename="../../CommandConstraints.cpp" line="4984"/>
<location filename="../../CommandConstraints.cpp" line="5434"/>
<location filename="../../CommandConstraints.cpp" line="5491"/>
<location filename="../../CommandConstraints.cpp" line="5270"/>
<location filename="../../CommandConstraints.cpp" line="5327"/>
<source>Select one or more arcs or circles from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="4989"/>
<location filename="../../CommandConstraints.cpp" line="4990"/>
<source>Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5045"/>
<location filename="../../CommandConstraints.cpp" line="5540"/>
<location filename="../../CommandConstraints.cpp" line="5376"/>
<source>Constrain equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5046"/>
<source>Do you want to share the same radius for all selected elements?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5236"/>
<location filename="../../CommandConstraints.cpp" line="5715"/>
<location filename="../../CommandConstraints.cpp" line="5142"/>
<location filename="../../CommandConstraints.cpp" line="5551"/>
<source>Constraint only applies to arcs or circles.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5541"/>
<location filename="../../CommandConstraints.cpp" line="5377"/>
<source>Do you want to share the same diameter for all selected elements?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6030"/>
<location filename="../../CommandConstraints.cpp" line="6275"/>
<location filename="../../CommandConstraints.cpp" line="5866"/>
<location filename="../../CommandConstraints.cpp" line="6111"/>
<source>Select one or two lines from the sketch. Or select two edges and a point.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6186"/>
<location filename="../../CommandConstraints.cpp" line="6353"/>
<location filename="../../CommandConstraints.cpp" line="6022"/>
<location filename="../../CommandConstraints.cpp" line="6189"/>
<source>Parallel lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6187"/>
<location filename="../../CommandConstraints.cpp" line="6354"/>
<location filename="../../CommandConstraints.cpp" line="6023"/>
<location filename="../../CommandConstraints.cpp" line="6190"/>
<source>An angle constraint cannot be set for two parallel lines.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6219"/>
<location filename="../../CommandConstraints.cpp" line="6055"/>
<source>Cannot add an angle constraint on an axis!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6532"/>
<location filename="../../CommandConstraints.cpp" line="6368"/>
<source>Select two edges from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6561"/>
<location filename="../../CommandConstraints.cpp" line="7261"/>
<location filename="../../CommandConstraints.cpp" line="6397"/>
<location filename="../../CommandConstraints.cpp" line="7097"/>
<source>Select two or more compatible edges</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6566"/>
<location filename="../../CommandConstraints.cpp" line="6402"/>
<source>Sketch axes cannot be used in equality constraints</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6585"/>
<location filename="../../CommandConstraints.cpp" line="6421"/>
<source>Equality for B-spline edge currently unsupported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6615"/>
<location filename="../../CommandConstraints.cpp" line="6630"/>
<location filename="../../CommandConstraints.cpp" line="6682"/>
<location filename="../../CommandConstraints.cpp" line="6451"/>
<location filename="../../CommandConstraints.cpp" line="6466"/>
<location filename="../../CommandConstraints.cpp" line="6518"/>
<source>Select two or more edges of similar type</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6764"/>
<location filename="../../CommandConstraints.cpp" line="6777"/>
<location filename="../../CommandConstraints.cpp" line="6824"/>
<location filename="../../CommandConstraints.cpp" line="6891"/>
<location filename="../../CommandConstraints.cpp" line="6972"/>
<location filename="../../CommandConstraints.cpp" line="6600"/>
<location filename="../../CommandConstraints.cpp" line="6613"/>
<location filename="../../CommandConstraints.cpp" line="6660"/>
<location filename="../../CommandConstraints.cpp" line="6727"/>
<location filename="../../CommandConstraints.cpp" line="6808"/>
<source>Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6802"/>
<location filename="../../CommandConstraints.cpp" line="6956"/>
<location filename="../../CommandConstraints.cpp" line="6638"/>
<location filename="../../CommandConstraints.cpp" line="6792"/>
<source>Cannot add a symmetry constraint between a line and its end points.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6854"/>
<location filename="../../CommandConstraints.cpp" line="6914"/>
<location filename="../../CommandConstraints.cpp" line="6690"/>
<location filename="../../CommandConstraints.cpp" line="6750"/>
<source>Cannot add a symmetry constraint between a line and its end points!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7034"/>
<location filename="../../CommandConstraints.cpp" line="6870"/>
<source>Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1.</source>
<comment>Constraint_SnellsLaw</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7082"/>
<location filename="../../CommandConstraints.cpp" line="6918"/>
<source>Cannot create constraint with external geometry only.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7089"/>
<location filename="../../CommandConstraints.cpp" line="6925"/>
<source>Incompatible geometry is selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7099"/>
<location filename="../../CommandConstraints.cpp" line="6935"/>
<source>SnellsLaw on B-spline edge is currently unsupported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7283"/>
<location filename="../../CommandConstraints.cpp" line="7119"/>
<source>You cannot internally constrain an ellipse on another ellipse. Select only one ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7336"/>
<location filename="../../CommandConstraints.cpp" line="7514"/>
<location filename="../../CommandConstraints.cpp" line="7172"/>
<location filename="../../CommandConstraints.cpp" line="7350"/>
<source>Currently all internal geometrical elements of the ellipse are already exposed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7684"/>
<location filename="../../CommandConstraints.cpp" line="7692"/>
<location filename="../../CommandConstraints.cpp" line="7724"/>
<location filename="../../CommandConstraints.cpp" line="7797"/>
<location filename="../../CommandConstraints.cpp" line="7808"/>
<location filename="../../CommandConstraints.cpp" line="7520"/>
<location filename="../../CommandConstraints.cpp" line="7528"/>
<location filename="../../CommandConstraints.cpp" line="7560"/>
<location filename="../../CommandConstraints.cpp" line="7633"/>
<location filename="../../CommandConstraints.cpp" line="7644"/>
<source>Select constraints from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7050"/>
<location filename="../../CommandConstraints.cpp" line="6886"/>
<source>Selected objects are not just geometry from one sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7060"/>
<location filename="../../CommandConstraints.cpp" line="6896"/>
<source>Number of selected objects is not 3 (is %1).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7204"/>
<location filename="../../CommandConstraints.cpp" line="7217"/>
<location filename="../../CommandConstraints.cpp" line="7040"/>
<location filename="../../CommandConstraints.cpp" line="7053"/>
<source>Select at least one ellipse and one edge from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7238"/>
<location filename="../../CommandConstraints.cpp" line="7074"/>
<source>Sketch axes cannot be used in internal alignment constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7291"/>
<location filename="../../CommandConstraints.cpp" line="7469"/>
<location filename="../../CommandConstraints.cpp" line="7127"/>
<location filename="../../CommandConstraints.cpp" line="7305"/>
<source>Maximum 2 points are supported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7297"/>
<location filename="../../CommandConstraints.cpp" line="7475"/>
<location filename="../../CommandConstraints.cpp" line="7133"/>
<location filename="../../CommandConstraints.cpp" line="7311"/>
<source>Maximum 2 lines are supported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7335"/>
<location filename="../../CommandConstraints.cpp" line="7513"/>
<location filename="../../CommandConstraints.cpp" line="7171"/>
<location filename="../../CommandConstraints.cpp" line="7349"/>
<source>Nothing to constrain</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7426"/>
<location filename="../../CommandConstraints.cpp" line="7437"/>
<location filename="../../CommandConstraints.cpp" line="7604"/>
<location filename="../../CommandConstraints.cpp" line="7615"/>
<location filename="../../CommandConstraints.cpp" line="7262"/>
<location filename="../../CommandConstraints.cpp" line="7273"/>
<location filename="../../CommandConstraints.cpp" line="7440"/>
<location filename="../../CommandConstraints.cpp" line="7451"/>
<source>Extra elements</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7427"/>
<location filename="../../CommandConstraints.cpp" line="7438"/>
<location filename="../../CommandConstraints.cpp" line="7605"/>
<location filename="../../CommandConstraints.cpp" line="7263"/>
<location filename="../../CommandConstraints.cpp" line="7274"/>
<location filename="../../CommandConstraints.cpp" line="7441"/>
<source>More elements than possible for the given ellipse were provided. These were ignored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7453"/>
<location filename="../../CommandConstraints.cpp" line="7289"/>
<source>You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7461"/>
<location filename="../../CommandConstraints.cpp" line="7297"/>
<source>You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7616"/>
<location filename="../../CommandConstraints.cpp" line="7452"/>
<source>More elements than possible for the given arc of ellipse were provided. These were ignored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7624"/>
<location filename="../../CommandConstraints.cpp" line="7460"/>
<source>Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
@@ -3775,8 +3767,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5133"/>
<location filename="../../CommandConstraints.cpp" line="5291"/>
<location filename="../../EditDatumDialog.cpp" line="104"/>
<source>Radius:</source>
<translation type="unfinished"></translation>
@@ -3787,8 +3777,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5612"/>
<location filename="../../CommandConstraints.cpp" line="5759"/>
<location filename="../../CommandConstraints.cpp" line="5448"/>
<location filename="../../CommandConstraints.cpp" line="5595"/>
<location filename="../../EditDatumDialog.cpp" line="110"/>
<source>Diameter:</source>
<translation type="unfinished"></translation>
@@ -3821,37 +3811,23 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5127"/>
<location filename="../../CommandConstraints.cpp" line="5285"/>
<source>Change weight</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5128"/>
<location filename="../../CommandConstraints.cpp" line="5286"/>
<location filename="../../EditDatumDialog.cpp" line="115"/>
<source>Weight:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5132"/>
<location filename="../../CommandConstraints.cpp" line="5290"/>
<source>Change radius</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5611"/>
<location filename="../../CommandConstraints.cpp" line="5758"/>
<location filename="../../CommandConstraints.cpp" line="5447"/>
<location filename="../../CommandConstraints.cpp" line="5594"/>
<source>Change diameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7116"/>
<location filename="../../CommandConstraints.cpp" line="6952"/>
<source>Refractive index ratio</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7117"/>
<location filename="../../CommandConstraints.cpp" line="6953"/>
<source>Ratio n2/n1:</source>
<translation type="unfinished"></translation>
</message>
@@ -5370,8 +5346,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
<context>
<name>Sketcher_ConstrainDiameter</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5947"/>
<location filename="../../CommandConstraints.cpp" line="5948"/>
<location filename="../../CommandConstraints.cpp" line="5783"/>
<location filename="../../CommandConstraints.cpp" line="5784"/>
<source>Fix the diameter of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
@@ -5379,8 +5355,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
<context>
<name>Sketcher_ConstrainRadius</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5943"/>
<location filename="../../CommandConstraints.cpp" line="5944"/>
<location filename="../../CommandConstraints.cpp" line="5779"/>
<location filename="../../CommandConstraints.cpp" line="5780"/>
<source>Fix the radius of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>