[Fem] fix grammar

src/Mod/Fem/ObjectsFem.py

@@ -420,7 +420,7 @@ def makeElementGeometry1D(
     element_geometry1D.ElementGeometry1D(obj)
     sec_types = element_geometry1D.ElementGeometry1D.known_beam_types
     if sectiontype not in sec_types:
-        FreeCAD.Console.PrintError("Section type is not known. Set to " + sec_types[0] + " \n")
+        FreeCAD.Console.PrintError("Section type is unknown. Set to " + sec_types[0] + " \n")
         obj.SectionType = sec_types[0]
     else:
         obj.SectionType = sectiontype

src/Mod/Fem/femexamples/boxanalysis_static.py

@@ -83,7 +83,7 @@ def setup(doc=None, solvertype="ccxtools"):
         ObjectsFem.makeEquationElasticity(doc, solver_obj)
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py

@@ -113,7 +113,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/buckling_platebuckling.py

@@ -87,7 +87,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py

@@ -92,7 +92,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/ccx_cantilever_base_edge.py

@@ -76,7 +76,7 @@ def setup_cantilever_base_edge(doc=None, solvertype="ccxtools"):
         solver_obj = ObjectsFem.makeSolverMystran(doc, "SolverMystran")
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/ccx_cantilever_base_face.py

@@ -67,7 +67,7 @@ def setup_cantilever_base_face(doc=None, solvertype="ccxtools"):
         solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/ccx_cantilever_base_solid.py

@@ -66,7 +66,7 @@ def setup_cantilever_base_solid(doc=None, solvertype="ccxtools"):
         solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_centrif.py

@@ -134,7 +134,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_contact_shell_shell.py

@@ -143,7 +143,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_contact_solid_solid.py

@@ -123,7 +123,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_section_print.py

@@ -228,7 +228,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_selfweight_cantilever.py

@@ -95,7 +95,7 @@ def setup(doc=None, solvertype="ccxtools"):
         eq_obj.LinearSolverType = "Direct"
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_tie.py

@@ -113,7 +113,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_transform_beam_hinged.py

@@ -123,7 +123,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/constraint_transform_torque.py

@@ -120,7 +120,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py

@@ -94,7 +94,7 @@ def setup(doc=None, solvertype="elmer"):
         eq_obj.DisplaceMesh = False
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/equation_electrostatics_capacitance_two_balls.py

@@ -110,7 +110,7 @@ def setup(doc=None, solvertype="elmer"):
         eq_electrostatic.CalculateElectricField = True
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     analysis.addObject(solver_obj)

src/Mod/Fem/femexamples/equation_electrostatics_electricforce_elmer_nongui6.py

@@ -169,7 +169,7 @@ def setup(doc=None, solvertype="elmer"):
         ObjectsFem.makeEquationElectricforce(doc, solver_obj)
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     analysis.addObject(solver_obj)

src/Mod/Fem/femexamples/equation_flow_elmer_2D.py

@@ -123,7 +123,7 @@ def setup(doc=None, solvertype="elmer"):
         equation_heat = ObjectsFem.makeEquationHeat(doc, solver_obj)
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
         return doc

src/Mod/Fem/femexamples/equation_flux_elmer.py

@@ -88,7 +88,7 @@ def setup(doc=None, solvertype="elmer"):
         equation_flux_temperature = ObjectsFem.makeEquationFlux(doc, solver_obj)
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
         return doc

src/Mod/Fem/femexamples/equation_magnetodynamics_elmer.py

@@ -111,7 +111,7 @@ def setup(doc=None, solvertype="elmer"):
         eq_electrostatic.LinearPreconditioning = "None"
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     analysis.addObject(solver_obj)

src/Mod/Fem/femexamples/frequency_beamsimple.py

@@ -90,7 +90,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py

@@ -129,7 +129,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py

@@ -118,7 +118,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py

@@ -114,7 +114,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/material_nl_platewithhole.py

@@ -123,7 +123,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/mystran_plate.py

@@ -129,7 +129,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
 

src/Mod/Fem/femexamples/rc_wall_2d.py

@@ -109,7 +109,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py

@@ -98,7 +98,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py

@@ -208,7 +208,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/thermomech_bimetall.py

@@ -135,7 +135,7 @@ def setup(doc=None, solvertype="ccxtools"):
         eq_elasticity.Priority = 1
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/thermomech_flow1d.py

@@ -130,7 +130,7 @@ def setup(doc=None, solvertype="ccxtools"):
         solver_obj.WorkingDir = u""
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femexamples/thermomech_spine.py

@@ -93,7 +93,7 @@ def setup(doc=None, solvertype="ccxtools"):
     #     analysis.addObject(ObjectsFem.makeSolverElmer(doc, "SolverElmer"))
     else:
         FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
+            "Unknown or unsupported solver type: {}. "
             "No solver object was created.\n".format(solvertype)
         )
     if solvertype == "calculix" or solvertype == "ccxtools":

src/Mod/Fem/femtest/app/test_material.py

@@ -77,7 +77,7 @@ class TestMaterialUnits(unittest.TestCase):
             self.assertTrue(
                 checkparamunit(param),
                 "Unit of quantity material parameter {} "
-                "is not known by FreeCAD unit system."
+                "is unknown to the FreeCAD unit system."
                 .format(param)
             )