FEM: Fix cxx typo and remove calculix from solvers tab in examples (#12876)

* FEM: remove calculix from solvers * FEM: remove calculix from joint with ccxtools if branches * FEM: remove calculix from its if * FEM: fix cxx typo in translations * FEM: fix cxx typo in classes name * FEM: fix ccx typo in shortcuts * FEM: convert FEM_*CcxTools to CamelCase * FEM: remove tests related to calculix * FEM: remove test_solver_calculix.py from Fem/CMakeLists.txt * FEM: convert all 'CalculiXccxTools' to 'CalculiXCcxTools' * FEM: revert changes in all *_*.ts files * FEM: convert 'SolverCcxtools' to 'SolverCcxTools' * FEM: convert remaining 'Ccxtools' to 'CcxTools'
2024-04-01 15:51:23 +00:00
parent 01b0ae5d81
commit e99ee08514
53 changed files with 145 additions and 588 deletions
--- a/src/Gui/PreferencePackTemplates/Shortcuts.cfg
+++ b/src/Gui/PreferencePackTemplates/Shortcuts.cfg
@@ -220,7 +220,7 @@
          <FCText Name="FEM_ResultShow">R, S</FCText>
          <FCText Name="FEM_ResultsPurge">R, P</FCText>
          <FCText Name="FEM_SolverCalculiX">S, C</FCText>
-          <FCText Name="FEM_SolverCalculixCxxtools">S, X</FCText>
+          <FCText Name="FEM_SolverCalculiXCcxTools">S, X</FCText>
          <FCText Name="FEM_SolverControl">S, T</FCText>
          <FCText Name="FEM_SolverElmer">S, E</FCText>
          <FCText Name="FEM_SolverMystran">S, M</FCText>
--- a/src/Mod/Fem/CMakeLists.txt
+++ b/src/Mod/Fem/CMakeLists.txt
@@ -321,7 +321,6 @@ SET(FemTestsApp_SRCS
    femtest/app/test_object.py
    femtest/app/test_open.py
    femtest/app/test_result.py
-    femtest/app/test_solver_calculix.py
    femtest/app/test_solver_elmer.py
    femtest/app/test_solver_mystran.py
    femtest/app/test_solver_z88.py
--- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts
@@ -5659,7 +5659,7 @@ used for the Elmer solver</source>
    </message>
 </context>
 <context>
-    <name>FEM_SolverCalculixCxxtools</name>
+    <name>FEM_SolverCalculiXCcxTools</name>
    <message>
        <location filename="../../../femcommands/commands.py" line="1058"/>
        <source>Solver CalculiX Standard</source>
--- a/src/Mod/Fem/Gui/Workbench.cpp
+++ b/src/Mod/Fem/Gui/Workbench.cpp
@@ -166,7 +166,7 @@ Gui::ToolBarItem* Workbench::setupToolBars() const
    Gui::ToolBarItem* solve = new Gui::ToolBarItem(root);
    solve->setCommand("Solve");
    if (!Fem::Tools::checkIfBinaryExists("CCX", "ccx", "ccx").empty()) {
-        *solve << "FEM_SolverCalculixCxxtools";
+        *solve << "FEM_SolverCalculiXCcxTools";
    }
    if (!Fem::Tools::checkIfBinaryExists("Elmer", "elmer", "ElmerSolver").empty()) {
        *solve << "FEM_SolverElmer";
@@ -323,7 +323,7 @@ Gui::MenuItem* Workbench::setupMenuBar() const
    Gui::MenuItem* solve = new Gui::MenuItem;
    root->insertItem(item, solve);
    solve->setCommand("&Solve");
-    *solve << "FEM_SolverCalculixCxxtools"
+    *solve << "FEM_SolverCalculiXCcxTools"
           << "FEM_SolverElmer"
           << "FEM_SolverMystran"
           << "FEM_SolverZ88"
--- a/src/Mod/Fem/ObjectsFem.py
+++ b/src/Mod/Fem/ObjectsFem.py
@@ -879,11 +879,11 @@ def makeEquationMagnetodynamic2D(
    return obj


-def makeSolverCalculixCcxTools(
+def makeSolverCalculiXCcxTools(
    doc,
    name="SolverCcxTools"
 ):
-    """makeSolverCalculixCcxTools(document, [name]):
+    """makeSolverCalculiXCcxTools(document, [name]):
    makes a Calculix solver object for the ccx tools module"""
    obj = doc.addObject("Fem::FemSolverObjectPython", name)
    from femobjects import solver_ccxtools
--- a/src/Mod/Fem/TestFemApp.py
+++ b/src/Mod/Fem/TestFemApp.py
@@ -35,7 +35,6 @@ from femtest.app.test_mesh import TestMeshEleTetra10 as FemTest08
 from femtest.app.test_mesh import TestMeshGroups as FemTest09
 from femtest.app.test_result import TestResult as FemTest10
 from femtest.app.test_ccxtools import TestCcxTools as FemTest11
-from femtest.app.test_solver_calculix import TestSolverCalculix as FemTest12
 from femtest.app.test_solver_elmer import TestSolverElmer as FemTest13
 from femtest.app.test_solver_z88 import TestSolverZ88 as FemTest14

@@ -51,6 +50,5 @@ False if FemTest08.__name__ else True
 False if FemTest09.__name__ else True
 False if FemTest10.__name__ else True
 False if FemTest11.__name__ else True
-False if FemTest12.__name__ else True
 False if FemTest13.__name__ else True
 False if FemTest14.__name__ else True
--- a/src/Mod/Fem/femcommands/commands.py
+++ b/src/Mod/Fem/femcommands/commands.py
@@ -1045,19 +1045,19 @@ class _ResultsPurge(CommandManager):
        resulttools.purge_results(self.active_analysis)


-class _SolverCxxtools(CommandManager):
+class _SolverCcxTools(CommandManager):
    "The FEM_SolverCalculix ccx tools command definition"

    def __init__(self):
-        super(_SolverCxxtools, self).__init__()
+        super(_SolverCcxTools, self).__init__()
        self.pixmap = "FEM_SolverStandard"
        self.menutext = Qt.QT_TRANSLATE_NOOP(
-            "FEM_SolverCalculixCxxtools",
+            "FEM_SolverCalculiXCcxTools",
            "Solver CalculiX Standard"
        )
        self.accel = "S, X"
        self.tooltip = Qt.QT_TRANSLATE_NOOP(
-            "FEM_SolverCalculixCxxtools",
+            "FEM_SolverCalculiXCcxTools",
            "Creates a standard FEM solver CalculiX with ccx tools"
        )
        self.is_active = "with_analysis"
@@ -1072,7 +1072,7 @@ class _SolverCxxtools(CommandManager):
        FreeCADGui.addModule("FemGui")
        if has_nonlinear_material_obj:
            FreeCADGui.doCommand(
-                "solver = ObjectsFem.makeSolverCalculixCcxTools(FreeCAD.ActiveDocument)"
+                "solver = ObjectsFem.makeSolverCalculiXCcxTools(FreeCAD.ActiveDocument)"
            )
            FreeCADGui.doCommand("solver.GeometricalNonlinearity = 'nonlinear'")
            FreeCADGui.doCommand("solver.MaterialNonlinearity = 'nonlinear'")
@@ -1080,7 +1080,7 @@ class _SolverCxxtools(CommandManager):
        else:
            FreeCADGui.doCommand(
                "FemGui.getActiveAnalysis().addObject(ObjectsFem."
-                "makeSolverCalculixCcxTools(FreeCAD.ActiveDocument))"
+                "makeSolverCalculiXCcxTools(FreeCAD.ActiveDocument))"
            )
        FreeCAD.ActiveDocument.commitTransaction()
        # expand analysis object in tree view
@@ -1366,8 +1366,8 @@ FreeCADGui.addCommand(
    _ResultsPurge()
 )
 FreeCADGui.addCommand(
-    "FEM_SolverCalculixCxxtools",
-    _SolverCxxtools()
+    "FEM_SolverCalculiXCcxTools",
+    _SolverCcxTools()
 )
 FreeCADGui.addCommand(
    "FEM_SolverCalculiX",
--- a/src/Mod/Fem/femexamples/boxanalysis_frequency.py
+++ b/src/Mod/Fem/femexamples/boxanalysis_frequency.py
@@ -35,7 +35,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": [],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["frequency"]
    }
@@ -70,12 +70,10 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = doc.Analysis

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "frequency"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/boxanalysis_static.py
+++ b/src/Mod/Fem/femexamples/boxanalysis_static.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force", "pressure"],
-        "solvers": ["calculix", "ccxtools", "elmer"],
+        "solvers": ["ccxtools", "elmer"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -73,10 +73,8 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = doc.Analysis

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
@@ -86,7 +84,7 @@ def setup(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py
+++ b/src/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["displacement", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["buckling"]
    }
@@ -106,17 +106,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "buckling"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/buckling_platebuckling.py
+++ b/src/Mod/Fem/femexamples/buckling_platebuckling.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["displacement", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["buckling"]
    }
@@ -80,17 +80,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "buckling"
        solver_obj.BucklingFactors = 10
--- a/src/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py
+++ b/src/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py
@@ -38,7 +38,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Hexa8",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["buckling"]
    }
@@ -85,17 +85,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver,
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "buckling"
        solver_obj.BucklingFactors = 10
--- a/src/Mod/Fem/femexamples/ccx_cantilever_base_edge.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_base_edge.py
@@ -67,10 +67,8 @@ def setup_cantilever_base_edge(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "mystran":
        solver_obj = ObjectsFem.makeSolverMystran(doc, "SolverMystran")
@@ -79,7 +77,7 @@ def setup_cantilever_base_edge(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/ccx_cantilever_base_face.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_base_face.py
@@ -56,10 +56,8 @@ def setup_cantilever_base_face(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "mystran":
        solver_obj = ObjectsFem.makeSolverMystran(doc, "SolverMystran")
@@ -70,7 +68,7 @@ def setup_cantilever_base_face(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/ccx_cantilever_base_solid.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_base_solid.py
@@ -52,10 +52,8 @@ def setup_cantilever_base_solid(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
@@ -69,7 +67,7 @@ def setup_cantilever_base_solid(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py
@@ -34,7 +34,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py
@@ -34,7 +34,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py
@@ -34,7 +34,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py
@@ -38,7 +38,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Hexa20",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "elmer", "z88"],
+        "solvers": ["ccxtools", "elmer", "z88"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Quad4",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "mystran"],
+        "solvers": ["ccxtools", "mystran"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Quad8",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg2",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "mystran"],
+        "solvers": ["ccxtools", "mystran"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py
@@ -32,7 +32,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py
@@ -36,7 +36,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tetra4",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "elmer", "mystran", "z88"],
+        "solvers": ["ccxtools", "elmer", "mystran", "z88"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "mystran"],
+        "solvers": ["ccxtools", "mystran"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py
@@ -32,7 +32,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "z88"],
+        "solvers": ["ccxtools", "z88"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
@@ -35,7 +35,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "elmer", "mystran", "z88"],
+        "solvers": ["ccxtools", "elmer", "mystran", "z88"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py
@@ -35,7 +35,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "elmer", "mystran", "z88"],
+        "solvers": ["ccxtools", "elmer", "mystran", "z88"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py
@@ -35,7 +35,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "displacement"],
-        "solvers": ["calculix", "ccxtools", "elmer"],
+        "solvers": ["ccxtools", "elmer"],
        "material": "solid",
        "equations": ["mechanical"]
    }
--- a/src/Mod/Fem/femexamples/constraint_centrif.py
+++ b/src/Mod/Fem/femexamples/constraint_centrif.py
@@ -42,7 +42,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["centrif", "fixed"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "multimaterial",
        "equations": ["mechanical"]
    }
@@ -127,17 +127,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py
+++ b/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py
@@ -41,7 +41,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria3",
        "constraints": ["fixed", "force", "contact"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -136,17 +136,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.BeamShellResultOutput3D = True
        solver_obj.GeometricalNonlinearity = "linear"  # really?
--- a/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py
+++ b/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py
@@ -42,7 +42,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "pressure", "contact"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -116,17 +116,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/constraint_section_print.py
+++ b/src/Mod/Fem/femexamples/constraint_section_print.py
@@ -48,7 +48,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["section_print", "fixed", "pressure"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -221,17 +221,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/constraint_selfweight_cantilever.py
+++ b/src/Mod/Fem/femexamples/constraint_selfweight_cantilever.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "self weight"],
-        "solvers": ["calculix", "ccxtools", "elmer"],
+        "solvers": ["ccxtools", "elmer"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -84,10 +84,8 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
@@ -98,7 +96,7 @@ def setup(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/constraint_tie.py
+++ b/src/Mod/Fem/femexamples/constraint_tie.py
@@ -42,7 +42,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force", "tie"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -106,17 +106,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/constraint_transform_beam_hinged.py
+++ b/src/Mod/Fem/femexamples/constraint_transform_beam_hinged.py
@@ -42,7 +42,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["pressure", "displacement", "transform"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -116,17 +116,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/constraint_transform_torque.py
+++ b/src/Mod/Fem/femexamples/constraint_transform_torque.py
@@ -50,7 +50,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force", "transform"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -113,17 +113,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py
+++ b/src/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": [],
-        "solvers": ["calculix", "ccxtools", "elmer"],
+        "solvers": ["ccxtools", "elmer"],
        "material": "solid",
        "equations": ["elasticity"]  # "frequency", but list not allowed here
    }
@@ -81,10 +81,8 @@ def setup(doc=None, solvertype="elmer"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
@@ -97,7 +95,7 @@ def setup(doc=None, solvertype="elmer"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "frequency"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = False
--- a/src/Mod/Fem/femexamples/frequency_beamsimple.py
+++ b/src/Mod/Fem/femexamples/frequency_beamsimple.py
@@ -37,7 +37,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["frequency"]
    }
@@ -83,17 +83,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "frequency"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py
+++ b/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py
@@ -40,7 +40,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "multimaterial",
        "equations": ["mechanical"]
    }
@@ -122,17 +122,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py
+++ b/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py
@@ -38,7 +38,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "multimaterial",
        "equations": ["mechanical"]
    }
@@ -111,17 +111,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py
+++ b/src/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py
@@ -41,7 +41,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "pressure"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "multimaterial",
        "equations": ["mechanical"]
    }
@@ -107,17 +107,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/material_nl_platewithhole.py
+++ b/src/Mod/Fem/femexamples/material_nl_platewithhole.py
@@ -49,7 +49,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "nonlinear",
        "equations": ["mechanical"]
    }
@@ -116,17 +116,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/mystran_plate.py
+++ b/src/Mod/Fem/femexamples/mystran_plate.py
@@ -39,7 +39,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Quad4",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools", "elmer", "mystran"],
+        "solvers": ["ccxtools", "elmer", "mystran"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -115,10 +115,8 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
@@ -133,7 +131,7 @@ def setup(doc=None, solvertype="ccxtools"):
            "No solver object was created.\n".format(solvertype)
        )

-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/rc_wall_2d.py
+++ b/src/Mod/Fem/femexamples/rc_wall_2d.py
@@ -42,7 +42,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["fixed", "force", "displacement"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "reinforced",
        "equations": ["mechanical"]
    }
@@ -102,17 +102,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py
+++ b/src/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py
@@ -41,7 +41,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["force", "fixed"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -91,17 +91,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py
+++ b/src/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py
@@ -41,7 +41,7 @@ def get_information():
        "meshtype": "face",
        "meshelement": "Tria6",
        "constraints": ["force", "fixed"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -201,17 +201,15 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    else:
        FreeCAD.Console.PrintWarning(
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femexamples/thermomech_bimetall.py
+++ b/src/Mod/Fem/femexamples/thermomech_bimetall.py
@@ -49,7 +49,7 @@ def get_information():
        "meshtype": "solid",
        "meshelement": "Tet10",
        "constraints": ["fixed", "initial temperature", "temperature"],
-        "solvers": ["calculix", "ccxtools", "elmer"],
+        "solvers": ["ccxtools", "elmer"],
        "material": "multimaterial",
        "equations": ["thermomechanical"]
    }
@@ -120,10 +120,8 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "elmer":
        solver_obj = analysis.addObject(ObjectsFem.makeSolverElmer(doc, "SolverElmer"))[0]
@@ -138,7 +136,7 @@ def setup(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.AnalysisType = "thermomech"
        solver_obj.GeometricalNonlinearity = "linear"
        solver_obj.ThermoMechSteadyState = True
--- a/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py
+++ b/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py
@@ -41,7 +41,7 @@ def get_information():
        "meshtype": "edge",
        "meshelement": "Seg3",
        "constraints": ["fixed", "force"],
-        "solvers": ["calculix", "ccxtools"],
+        "solvers": ["ccxtools"],
        "material": "solid",
        "equations": ["mechanical"]
    }
@@ -399,10 +399,8 @@ def setup(doc=None, solvertype="ccxtools"):
    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")

    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+    if solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculiXCcxTools(doc, "CalculiXCcxTools")
        solver_obj.WorkingDir = u""
    elif solvertype == "z88":
        solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
@@ -411,7 +409,7 @@ def setup(doc=None, solvertype="ccxtools"):
            "Unknown or unsupported solver type: {}. "
            "No solver object was created.\n".format(solvertype)
        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
+    if solvertype == "ccxtools":
        solver_obj.SplitInputWriter = False
        solver_obj.AnalysisType = "static"
        solver_obj.GeometricalNonlinearity = "linear"
--- a/src/Mod/Fem/femsolver/settings.py
+++ b/src/Mod/Fem/femsolver/settings.py
@@ -173,7 +173,7 @@ def get_default_solver():
    """
    solver_map = {0: "None"}
    if get_binary("Calculix", True):
-        solver_map[1] = "CalculixCcxTools"
+        solver_map[1] = "CalculiXCcxTools"
    if get_binary("ElmerSolver", True):
        solver_map[len(solver_map)] = "Elmer"
    if get_binary("Mystran", True):
--- a/src/Mod/Fem/femtest/app/test_ccxtools.py
+++ b/src/Mod/Fem/femtest/app/test_ccxtools.py
@@ -22,7 +22,7 @@
 # *                                                                         *
 # ***************************************************************************

-__title__ = "Ccxtools FEM unit tests"
+__title__ = "CcxTools FEM unit tests"
 __author__ = "Bernd Hahnebach"
 __url__ = "https://www.freecad.org"

@@ -153,7 +153,7 @@ class TestCcxTools(unittest.TestCase):
        if analysis_dir is None:
            analysis_dir = testtools.get_fem_test_tmp_dir(self.pre_dir_name + base_name)
        analysis = self.document.Analysis
-        solver_object = self.document.CalculiXccxTools
+        solver_object = self.document.CalculiXCcxTools
        fea = ccxtools.FemToolsCcx(analysis, solver_object, test_mode=True)
        fea.update_objects()

--- a/src/Mod/Fem/femtest/app/test_object.py
+++ b/src/Mod/Fem/femtest/app/test_object.py
@@ -328,7 +328,7 @@ class TestObjectType(unittest.TestCase):
        solverelmer = ObjectsFem.makeSolverElmer(doc)
        self.assertEqual(
            "Fem::SolverCcxTools",
-            type_of_obj(ObjectsFem.makeSolverCalculixCcxTools(doc))
+            type_of_obj(ObjectsFem.makeSolverCalculiXCcxTools(doc))
        )
        self.assertEqual(
            "Fem::SolverCalculix",
@@ -574,7 +574,7 @@ class TestObjectType(unittest.TestCase):
        ))
        solverelmer = ObjectsFem.makeSolverElmer(doc)
        self.assertTrue(is_of_type(
-            ObjectsFem.makeSolverCalculixCcxTools(doc),
+            ObjectsFem.makeSolverCalculiXCcxTools(doc),
            "Fem::SolverCcxTools"
        ))
        self.assertTrue(is_of_type(
@@ -1285,7 +1285,7 @@ class TestObjectType(unittest.TestCase):
        ))

        # SolverCcxTools
-        solver_ccxtools = ObjectsFem.makeSolverCalculixCcxTools(doc)
+        solver_ccxtools = ObjectsFem.makeSolverCalculiXCcxTools(doc)
        self.assertTrue(is_derived_from(
            solver_ccxtools,
            "App::DocumentObject"
@@ -1745,7 +1745,7 @@ class TestObjectType(unittest.TestCase):
        )
        solverelmer = ObjectsFem.makeSolverElmer(doc)
        self.assertTrue(
-            ObjectsFem.makeSolverCalculixCcxTools(
+            ObjectsFem.makeSolverCalculiXCcxTools(
                doc
            ).isDerivedFrom("Fem::FemSolverObjectPython")
        )
@@ -1891,7 +1891,7 @@ def create_all_fem_objects_doc(
        ObjectsFem.makePostVtkFilterCutFunction(doc, vres)
        ObjectsFem.makePostVtkFilterWarp(doc, vres)

-    analysis.addObject(ObjectsFem.makeSolverCalculixCcxTools(doc))
+    analysis.addObject(ObjectsFem.makeSolverCalculiXCcxTools(doc))
    analysis.addObject(ObjectsFem.makeSolverCalculix(doc))
    sol = analysis.addObject(ObjectsFem.makeSolverElmer(doc))[0]
    analysis.addObject(ObjectsFem.makeSolverMystran(doc))
--- a/src/Mod/Fem/femtest/app/test_solver_calculix.py
+++ b/src/Mod/Fem/femtest/app/test_solver_calculix.py
@@ -1,384 +0,0 @@
-# ***************************************************************************
-# *   Copyright (c) 2018 Bernd Hahnebach <bernd@bimstatik.org>              *
-# *                                                                         *
-# *   This file is part of the FreeCAD CAx development system.              *
-# *                                                                         *
-# *   This program is free software; you can redistribute it and/or modify  *
-# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
-# *   as published by the Free Software Foundation; either version 2 of     *
-# *   the License, or (at your option) any later version.                   *
-# *   for detail see the LICENCE text file.                                 *
-# *                                                                         *
-# *   This program is distributed in the hope that it will be useful,       *
-# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
-# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
-# *   GNU Library General Public License for more details.                  *
-# *                                                                         *
-# *   You should have received a copy of the GNU Library General Public     *
-# *   License along with this program; if not, write to the Free Software   *
-# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
-# *   USA                                                                   *
-# *                                                                         *
-# ***************************************************************************
-
-__title__ = "Solver calculix FEM unit tests"
-__author__ = "Bernd Hahnebach"
-__url__ = "https://www.freecad.org"
-
-import unittest
-from os.path import join
-
-import FreeCAD
-
-import femsolver.run
-from . import support_utils as testtools
-from .support_utils import fcc_print
-from .support_utils import get_namefromdef
-
-
-class TestSolverCalculix(unittest.TestCase):
-    fcc_print("import TestSolverCalculix")
-
-    # ********************************************************************************************
-    def setUp(
-        self
-    ):
-        # setUp is executed before every test
-
-        # new document
-        self.document = FreeCAD.newDocument(self.__class__.__name__)
-
-        # more inits
-        self.pre_dir_name = "solver_calculix_"
-        self.ending = ".inp"
-        self.infilename = "Mesh"
-        self.test_file_dir = join(
-            testtools.get_fem_test_home_dir(),
-            "calculix"
-        )
-
-    # ********************************************************************************************
-    def tearDown(
-        self
-    ):
-        # tearDown is executed after every test
-        FreeCAD.closeDocument(self.document.Name)
-
-    # ********************************************************************************************
-    def test_00print(
-        self
-    ):
-        # since method name starts with 00 this will be run first
-        # this test just prints a line with stars
-
-        fcc_print("\n{0}\n{1} run FEM TestSolverCalculix tests {2}\n{0}".format(
-            100 * "*",
-            10 * "*",
-            55 * "*"
-        ))
-
-    # ********************************************************************************************
-    def test_box_frequency(
-        self
-    ):
-        fcc_print("")
-        from femexamples.boxanalysis_frequency import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_box_static(
-        self
-    ):
-        fcc_print("")
-        from femexamples.boxanalysis_static import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_buckling_flexuralbuckling(
-            self
-    ):
-        from femexamples.ccx_buckling_flexuralbuckling import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_beam_circle(
-        self
-    ):
-        from femexamples.ccx_cantilever_beam_circle import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_beam_pipe(
-        self
-    ):
-        from femexamples.ccx_cantilever_beam_pipe import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_beam_rect(
-        self
-    ):
-        from femexamples.ccx_cantilever_beam_rect import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_hexa20(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_hexa20 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_quad4(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_quad4 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_quad8(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_quad8 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_seg2(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_seg2 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_seg3(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_seg3 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_tria3(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_tria3 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_ele_tria6(
-        self
-    ):
-        from femexamples.ccx_cantilever_ele_tria6 import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_faceload(
-        self
-    ):
-        from femexamples.ccx_cantilever_faceload import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_nodeload(
-        self
-    ):
-        from femexamples.ccx_cantilever_nodeload import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_ccx_cantilever_prescribeddisplacement(
-        self
-    ):
-        from femexamples.ccx_cantilever_prescribeddisplacement import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_centrif(
-        self
-    ):
-        # TODO does pass on my local machine, but not on ci
-        return
-
-        from femexamples.constraint_centrif import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_contact_shell_shell(
-        self
-    ):
-        from femexamples.constraint_contact_shell_shell import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_contact_solid_solid(
-        self
-    ):
-        # TODO does pass on my local machine, but not on ci
-        return
-
-        from femexamples.constraint_contact_solid_solid import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_sectionprint(
-        self
-    ):
-        from femexamples.constraint_section_print import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_selfweight_cantilever(
-        self
-    ):
-        from femexamples.constraint_selfweight_cantilever import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_tie(
-        self
-    ):
-        from femexamples.constraint_tie import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_transform_beam_hinged(
-        self
-    ):
-        from femexamples.constraint_transform_beam_hinged import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_constraint_transform_torque(
-        self
-    ):
-        from femexamples.constraint_transform_torque import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_frequency_beamsimple(
-        self
-    ):
-        from femexamples.frequency_beamsimple import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_material_multiple_bendingbeam_fiveboxes(
-        self
-    ):
-        from femexamples.material_multiple_bendingbeam_fiveboxes import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_material_multiple_bendingbeam_fivefaces(
-        self
-    ):
-        from femexamples.material_multiple_bendingbeam_fivefaces import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_material_multiple_tensionrod_twoboxes(
-        self
-    ):
-        from femexamples.material_multiple_tensionrod_twoboxes import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_material_nonlinear(
-        self
-    ):
-        from femexamples.material_nl_platewithhole import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_square_pipe_end_twisted_edgeforces(
-        self
-    ):
-        from femexamples.square_pipe_end_twisted_edgeforces import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_square_pipe_end_twisted_nodeforces(
-        self
-    ):
-        from femexamples.square_pipe_end_twisted_nodeforces import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_thermomech_bimetall(
-        self
-    ):
-        from femexamples.thermomech_bimetall import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def input_file_writing_test(
-        self,
-        base_name
-    ):
-        self.document.recompute()
-
-        # get analysis working directory and save FreeCAD file
-        working_dir = testtools.get_fem_test_tmp_dir(self.pre_dir_name + base_name)
-        save_fc_file = join(working_dir, base_name + ".FCStd")
-        # fcc_print("Save FreeCAD file to {} ...".format(save_fc_file))
-        self.document.saveAs(save_fc_file)
-
-        # write input file
-        machine = self.document.SolverCalculiX.Proxy.createMachine(
-            self.document.SolverCalculiX,
-            working_dir,
-            True  # set testmode to True
-        )
-        machine.target = femsolver.run.PREPARE
-        machine.start()
-        machine.join()  # wait for the machine to finish
-
-        # compare input file with the given one
-        inpfile_given = join(
-            self.test_file_dir,
-            base_name + self.ending
-        )
-        inpfile_totest = join(
-            working_dir,
-            self.infilename + self.ending
-        )
-        # fcc_print("Comparing {}  to  {}".format(inpfile_given, inpfile_totest))
-        ret = testtools.compare_inp_files(
-            inpfile_given,
-            inpfile_totest
-        )
-        self.assertFalse(
-            ret,
-            "CalculiX write_inp_file for {0} test failed.\n{1}".format(base_name, ret)
-        )