This warning is not relevant to our project in this instance. We are not concerned about ABI-compatibility of DLLs since they are all compiled at the same time when building FreeCAD.
* Draft: Remove main QGroupBox from Circular Array tool
* Draft: Remove main QGroupBox from Polar Array tool
* Draft: Remove main QGroupBox from Ortho Array tool
* Draft: Remove AxisMode QGroup from Ortho Array tool
* Draft: Remove main QGroup from ShapeString tool
For several PD features the single-solid check fails. The regression
is caused by PR 13960 and reported as issue 19002. The reason for the
failure is that the first solid of the output shape is retrieved and
then checked for a single solid. This test will always pass, of course.
The single-solid is fixed for these features:
* Pad
* Pocket (never worked there)
* Fillet
* Chamfer
* Groove (never worked there)
* Revolution (never worked there)
* Loft
Fixes: 935bdf9a0f ("PartDesign: Refactor single-solid rule enforcement")
Draft Label ViewObject.Justification property was overriden by Object.StraightDistance property. The Justification in the 3D view was reset after recompute. This commit fixes the problem by setting Object.StraightDistance automatically when ViewObject.Justification is changed and vice versa. Also fixes the frame position when Justification is Center.
* Tools: Add ExpressionLineEdit to QtDesigner plugin
* Spreadsheet: Only use validator when when prefix is not '='
---------
Co-authored-by: wmayer <wmayer@freecad.org>
* Sketcher: Extend InputHints infrastructure to constraint tools
- Implement DrawSketchHandler::getToolHints() for constraint workflows
- Add centralized hint table mapping constraint commands to step-specific InputHints
- Integrate hint lookup in DrawSketchHandlerGenConstraint and dimension handler
- Provide step-by-step user guidance for:
- Coincident, PointOnObject, Distance (X/Y)
- Horizontal, Vertical, HorVer, Lock, Block
- Equal, Symmetric, Radius, Diameter, Angle
- Tangent, Perpendicular, Parallel
This continues the InputHints work started for drawing tools by enabling consistent, contextual guidance for constraint creation, including multi-step workflows like tangent-via-point.
* Call updateHint() after selection reset to re-arm the first-step prompt
when the tool stays active after apply.
* Add comments to hints table structure
* Sketcher: Update constraint hint text to use "pick" instead of "Select"
Change constraint hint text from "Select" to "pick" to maintain consistency
with existing FreeCAD UI style. This affects the DrawSketchHandlerGenConstraint
hint system for various constraint operations including coincident, distance,
horizontal/vertical, block, lock, symmetry, tangent, perpendicular, parallel,
and distance constraints.
The hints now follow the pattern:
- "%1 pick first point or edge"
- "%1 pick second point or edge"
- "%1 pick line or two points"
etc.
This provides consistent terminology throughout the sketcher constraint
creation workflow.
* - Remove redundant 'first' from initial selection hints
- Improve consistency in hint text formatting per Developer Guidelines
- Add consistent spacing in comment sections"
* Per PR feedback for DrawSketchHandlerDimension hints:
* Change 'Click to' to "pick"
* Simplify hint wording
* Combine redundant else
* Use direct return pattern instead of building hints list
* Update lookupConstraintHints() to use C++20 std:ranges::find_if form per PR review feedback
* Sketcher: Refine constraint hints per PR feedback
- Use consistent 'point or edge' phrasing in Distance and DistanceX/Y tools
- Reword Horizontal/Vertical step 0 to avoid misleading 'two points'
- Generalize Tangent and Perpendicular hints to 'edge' with optional point
- Simplify legacy Distance to 'point or edge'
* Add dynamic hint handling for PointOnObject constraint
- Implemented contextual hints in getToolHints() to generate an appropriate step 2 hint based on step 1 selection type
- Preserved static lookupConstraintHints() for all other tools
* Sketcher: Convert constraint hint table to C++20 designated initializer syntax
- Refactored static constraint hint table to follow Sketcher hint development guidelines
- Uses C++20 designated initializers for clarity and maintainability
- No changes to hint logic or behavior; content is identical to previous version
* Refactor slot op.
Move out of experimenation features
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Incorporate Hyarion's suggestions
* Update src/Mod/CAM/Path/Op/Slot.py
Co-authored-by: Benjamin Nauck <benjamin@nauck.se>
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Benjamin Nauck <benjamin@nauck.se>
* fix#21330: prevent hover tooltip from covering menu items
Instead of showing the tooltip at the mouse cursor,
it is now displayed to the right of the corresponding
menu option, avoiding overlap with the menu itself.
* Update src/Gui/Action.cpp
---------
Co-authored-by: Chris Hennes <chennes@pioneerlibrarysystem.org>
