This is a combination of 4 commits. Original commit messages follow.
[PD] Initial support for point sections in loft
This commit allows the last section in a loft to be a single vertex of a solid.
Currently single vertices of sketches or datum points are NOT supported.
[PD] Allow loft "profiles" to be points
Most reliably done in dialog-based workflow.
[PD] Allow loft last section to be sketch point
[PD] Refactor `Loft::execute`
Makes it easier to support adding a single-vertex sketch in profile or sections
field when selecting the sketch in tree (i.e. without selecting subelements).
[PD] Refactoring after PR #5176 is merged
This PR adds the functionality of pads to pad along either a custom direction or along an edge to pockets.
So with this PR Pad and Pocket are on the same level of functionality.
With these changes, one face per solid can be added as either the first
"profile" or subsequent sections in loft and pipe.
This commit depends on `App::PropertyXLinkSubList` preserving the order in which
sections are added.
A minor change this also adds is that when a solid's face is selected that face
is mentioned in the fields instead of the solid (eg `Box:Face1` instead of
`Box`).
- Helix: the property Turns has the App::PropertyFloatConstraint thus also the pointer to it must have the same property
- LinearPattern and Helix: make constraints static class member (forgot this in commit 114bdf6b)
- Draft: make the constraint const
- PolarPattern and LinearPattern assure that the header file is loaded at last to avoid potential troubles
Found via `codespell -q 3 -L aci,ake,aline,alle,alledges,alocation,als,ang,anid,apoints,ba,beginn,behaviour,bloaded,bottome,byteorder,calculater,cancelled,cancelling,cas,cascade,centimetre,childs,colour,colours,commen,connexion,currenty,dof,doubleclick,dum,eiter,elemente,ende,feld,finde,findf,freez,hist,iff,indicies,initialisation,initialise,initialised,initialises,initialisiert,inout,ist,kilometre,lod,mantatory,methode,metres,millimetre,modell,nd,noe,normale,normaly,nto,numer,oder,ontop,orgin,orginx,orginy,ot,pard,parms,pres,programm,que,recurrance,rougly,seperator,serie,sinc,strack,substraction,te,thist,thru,tread,uint,unter,vertexes,wallthickness,whitespaces -S ./.git,*.po,*.ts,./ChangeLog.txt,./src/3rdParty,./src/Mod/Assembly/App/opendcm,./src/CXX,./src/zipios++,./src/Base/swig*,./src/Mod/Robot/App/kdl_cp,./src/Mod/Import/App/SCL,./src/WindowsInstaller,./src/Doc/FreeCAD.uml,./build/doc/SourceDocu`
- to avoid invalid results:
- don't allow to set equal radii for cones
- don't allow to set equal wedge parameters
- don't allow zero quantities like e.g. the box width
- use full internal precision because it must be possible to create an e.g. 23.5 um wide box and using the default 2 displayed digits
- take spinbox limits from App
- add missing tooltips
- remove disturbing commented out line from Workbench.cpp
- some coding style issues fixed automatically by the MSVC IDE
We already have the possibility to create skewed prisms. I recently stumbled upon that I would need this feature for cylinders too.
This PR takes the existing prism extrude direction feature and use it for cylinders too
* pass boolean instead of int to setValue of PropertyBool
* support of symmetric option for two-length mode
* fix bug in TaskPadParameters::updateUI()
* remove strange acronyms from method names
- as discussed here: https://forum.freecadweb.org/viewtopic.php?f=17&t=50466&start=10#p433327
this PR is the first step for new Pad features.
It implements 3 features requested by users:
1. an option to measure the pad length along its direction if there is a custom direction
2. when there are two lengths, the reverse feature should be active
3. the pad dialog shows now always the used pad direction, no matter if it is a custom one or the sketch's normal
- Furthermore there are some code improvements (avoid rounding and blocking signals)
- Also adapt TestPad.py because its test used the case two lengths + reversed but this was not possible before this PR - the reverse option was not take into account for two lengths in FeatureSketchBased.cpp)
Now it is and therefore the test must be updated:
In the test the second sketch has the normal vector 0, -1, 0. As the reverse option is set the pad direction is 0, 1, 0. So in y direction is the length (1mm) and in -y direction is length2 (2mm). This gives together with the other pad of volume 1, a total volume of 4.
- fix UI issue: either reversed or midplane
As noticed by @chennes, when the pad uses symmetric, reversed is not sensible and vice versa.
This commit fixes the missing Gui side for the case midplane is checked and the App side.
- the PR also fix two typos
- Use fuzzy fuse/cut method with tolerance Precision::Confusion()
- Use parallel computation feature
- Allow that individual patterned item fail to intersect the baseobject.
Issue warning instead of error. This was done for performance reasons
but it can also be considered a feature.
- Simplify the code a bit
- Distinguish between overlapping mode and non-overlapping mode. In non-overlapping mode
the tool shapes are compounded instead of fused. For huge benefit in performance.
