Kurt Kremitzki
4eb59453e7
Break out PartDesign tests into own folder
2017-07-11 02:27:38 -05:00
luzpaz
1b56637c6f
typo fix
2017-07-10 19:29:55 -03:00
luzpaz
2badea8c37
TechDraw: typo fix
2017-07-10 19:29:55 -03:00
luzpaz
9343f5c616
Path: typo fix
2017-07-10 19:29:55 -03:00
luzpaz
928749d0a3
typo fix
2017-07-10 19:29:55 -03:00
luzpaz
17b637beb3
typo fix
2017-07-10 19:29:55 -03:00
luzpaz
960b7c175d
fix typo
2017-07-10 19:29:55 -03:00
luzpaz
d5d45e2661
fix typos
2017-07-10 19:29:55 -03:00
Markus Hovorka
d65d3d9572
FEM: Change tool-bar organization
...
Split the tool-bar into multiple smaller ones. Also make the ordering a
little more consistent: Initial conditions first, followed by boundary
conditions followed by constraints on whole bodies.
2017-07-10 19:21:40 -03:00
Markus Hovorka
1a0c19327d
FEM: Change menu-bar organization
...
Split the menu-bar into multiple smaller ones. Group constraints by the
physics they are involed into. Also make the ordering a little more
consistent: Initial conditions first, followed by boundary conditions
followed by constraints on whole bodies.
2017-07-10 19:21:40 -03:00
Markus Hovorka
f2c0f9c977
FEM: Adjust names of constraint menu items
2017-07-10 19:21:40 -03:00
Markus Hovorka
7ec6459284
FEM: Use short names for VTK post commands
2017-07-10 19:21:40 -03:00
Bernd Hahnebach
2e118be334
FEM: unit tests, temporary workaround for py3
2017-07-10 19:21:40 -03:00
Bernd Hahnebach
8e3bab6997
FEM: unit test, fix unit test if not all stats are used
2017-07-10 19:21:40 -03:00
Markus Lampert
d079741949
Added grbl post processor.
2017-07-10 19:19:46 -03:00
Markus Lampert
a7cb0627e8
Added support for imperial shopbot output and some standard post processor arguments.
2017-07-10 19:19:46 -03:00
sliptonic
465155b43c
Path: option for drilling return level
...
fix #3098
2017-07-10 19:17:41 -03:00
Markus Lampert
104eb53a8b
Fixed Contour.Direction and simplified Dogbone.Side determination.
2017-07-10 19:17:41 -03:00
Markus Lampert
1bda01646d
Fixed strongarming 'Side' for dogbnoe.
2017-07-10 19:17:41 -03:00
Markus Lampert
d99950010e
Fixed Dogbone creation to work for PathContour again.
2017-07-10 19:17:41 -03:00
sliptonic
9874444dba
Path: add feature for drill tip calculation
2017-07-10 19:17:41 -03:00
sliptonic
6c52548750
Path: add jointype and miterlimit to edge profiling
2017-07-10 19:17:41 -03:00
sliptonic
ddb2001dcb
Path: Change Profile 'side' enumeration to inside/outside
...
left/right was too ambiguous
correct profile direction set
2017-07-10 19:17:41 -03:00
sliptonic
48337e03c1
Path: fix #3048 Visibility on recompute is now preserved
2017-07-10 19:17:41 -03:00
sliptonic
444fc18bcc
Path: implement jointype for contour and profile fix #3116
...
Not implemented in the task panel. Settings are only available in the property pane.
2017-07-10 19:17:41 -03:00
sliptonic
023c5d8608
Path: Make PathProfile verbose
2017-07-10 19:17:41 -03:00
wmayer
349f8b5ff9
avoid to eventually try to init Gui twice
2017-07-10 20:51:30 +02:00
Yorik van Havre
d31be3117d
Draft: Refined Select plane to accept any 3 selected vertices
2017-07-08 14:27:44 -03:00
Bernd Hahnebach
ad2a4b5b5c
FEM: unit tests, add all result stats, except 1DFlow
2017-07-08 12:27:12 -03:00
Bernd Hahnebach
a1523e3b1b
FEM: result stats, fix some issues and add all result types
2017-07-08 12:27:12 -03:00
Bernd Hahnebach
4b25f75c0d
FEM: unit tests, use better coordinate values
2017-07-08 12:27:12 -03:00
Bernd Hahnebach
5785bd3826
py3: fix FEM Flow1D unit test FEM mesh
2017-07-08 12:27:12 -03:00
Yorik van Havre
cc89afb852
Merge pull request #859 from sliptonic/master
...
Fixes for startpoint.
2017-07-08 12:20:28 -03:00
sliptonic
0a776480f9
Merge remote-tracking branch 'realthunder/PathArea'
2017-07-07 16:42:14 -05:00
sliptonic
e8b93ef656
Path: cleanup start points
...
Make sure we're storing path parms for debugging
2017-07-07 16:42:06 -05:00
sliptonic
7ace55029e
Path: simplify the test fixture
...
Instead of creating a file from scratch, a test file
is included. Post processing the file from the gui
should give the same results as the test script.
2017-07-07 16:42:06 -05:00
sliptonic
c359ba6060
Path: fix bug in gcode importer.
...
Wouldn't handle lines with only a line number
2017-07-07 16:42:06 -05:00
sliptonic
fc989c7803
Path: Centroid post re-write
2017-07-07 16:42:06 -05:00
sliptonic
3093c4cd1b
re-arrange TestPathPost setup to simplify testing muliple posts
2017-07-07 16:42:06 -05:00
sliptonic
e4c696cac1
Path: MillFace start point
2017-07-07 16:42:06 -05:00
Randy
2cc09f9493
Improve Part.Shape.project documentation
...
This clarifies that Part.Shape.project expects a list of shapes as an argument, not a single shape. See this forum thread that highlights the confusion: https://forum.freecadweb.org/viewtopic.php?f=22&t=23287
2017-07-07 13:25:48 -03:00
Amritpal Singh
3aab7ffce5
Introduced custom spacing property in the Rebar object
2017-07-07 13:23:55 -03:00
wmayer
a066490b28
+ exception handling in FreeCADGui.addModule
2017-07-07 09:58:28 +02:00
Zheng, Lei
d554497ada
Path.Area: fix sortWires
...
sortWires was broken on open wires. The bug was introduced when open
wire direction feature is added.
2017-07-07 11:26:54 +08:00
Zheng, Lei
120b37b0c7
Path.Area: change fromShape() 'start' parameter behavior
...
'start' used to mean the initial resting position of the tool. Now it
is changed to mean the feed start position.
fromShape() has also improved to automatically guess 'retraction' and
'resume_height' parameters if not given, based on input shape boundary.
2017-07-07 11:26:54 +08:00
Zheng, Lei
90334e0478
Path.Area: handle empty wires without vertex
2017-07-07 11:26:54 +08:00
Yorik van Havre
fdedf8fb4d
Arch: Gave small tolerance to pipe connectors in case their baselines don't join exactly
2017-07-06 17:43:13 -03:00
Yorik van Havre
087a1c1056
Draft: Extended WPProxy tool
2017-07-06 14:44:13 -03:00
Markus Lampert
b046fa5604
Adde __init__ to the deployment.
2017-07-06 14:10:07 -03:00
wmayer
6a14bb7451
fix for mixing up SchemeVersion and FileVersion
2017-07-06 17:59:01 +02:00
