Modify the auxiliary spine to be a true helix, resulting in a much
smoother linear extrusion when a twist angle is applied. This also
corrects a bug in the scaling during linear extrusion, where non-uniform
scaling was not handled correctly.
at the moment the sorting is confusing, the sorting in the menu differs from the toolbars and some features even belong in the menu to another category than in the toolbars and one feature has not yet a toolbar entry
This PR implements a uniform sorting for the menu and toolbar and adds the missing toolbar icon
- this is necessary to perform electrodynamics simulations. Since the typical values are in the range of 1e6 S/m, we need the new units kS and MS
- since this is for simulations, also add electrical conductivity to the FEM material cards
On Windows the lower tabs of the PropertyView were being set to
triangular, which breaks stylesheets. This removes that code, so they
now take on whatever the standard shape is on the system.
Fixes#0004599
- the property has the name "Element order" thus the dialog should use the same name to avoid confusions
-also uniform naming for the element dimension and remove the redundant "Mesh" (is already in the UI groupBox heading
- Gmsh has since a while 2 new mesh algorithms
- on the other hand the two algorithms ""Frontal Delaunay" and "Frontal Hex" are deprecated and not listed anymore in the docs: https://gmsh.info/doc/texinfo/gmsh.html#index-Mesh_002eAlgorithm3D
and indeed all attempts with these 2 algorithms fail
* pass boolean instead of int to setValue of PropertyBool
* support of symmetric option for two-length mode
* fix bug in TaskPadParameters::updateUI()
* remove strange acronyms from method names
- as discussed here: https://forum.freecadweb.org/viewtopic.php?f=17&t=50466&start=10#p433327
this PR is the first step for new Pad features.
It implements 3 features requested by users:
1. an option to measure the pad length along its direction if there is a custom direction
2. when there are two lengths, the reverse feature should be active
3. the pad dialog shows now always the used pad direction, no matter if it is a custom one or the sketch's normal
- Furthermore there are some code improvements (avoid rounding and blocking signals)
- Also adapt TestPad.py because its test used the case two lengths + reversed but this was not possible before this PR - the reverse option was not take into account for two lengths in FeatureSketchBased.cpp)
Now it is and therefore the test must be updated:
In the test the second sketch has the normal vector 0, -1, 0. As the reverse option is set the pad direction is 0, 1, 0. So in y direction is the length (1mm) and in -y direction is length2 (2mm). This gives together with the other pad of volume 1, a total volume of 4.
- fix UI issue: either reversed or midplane
As noticed by @chennes, when the pad uses symmetric, reversed is not sensible and vice versa.
This commit fixes the missing Gui side for the case midplane is checked and the App side.
- the PR also fix two typos
- also adjust values slightly according to various sources
Since a factor 1000 is a big mistake and air is the most common gas, please commit this also for FC 0.19
==========================
* Enable to select any GeomTrimmedCurve (any arc supported by the Sketcher), as well as B-Splines.
* Use Edit Markers to provide visualisation of the cutting position and cut segment end point before trimming.
* Reject trimming Internal aligned geometry (internals of complex geometries such as ellipses or hyperbolas)
======================================
* Refactor the code for all GeomTrimmedCurve and non-periodic BSplines in a single block, adding
support for arcs of hyperbola, parabola and B-Splines.
* Refactor the code for periodic curves (circle, ellipse) in a single block, adding support for
periodic B-Splines.
* Add support for trimming limited by external geometry
* Trim deletes a geometry if intersections are detected and nothing would be left after trimming
* Trim deletes a geometry if no intersection are detected
Bonus:
* Function addConstraint moving the constraint instead of cloning it again
* SketchObject::seekTrimPoints as a wrapper of Part2DObject::seekTrimPoints providing
a correct handling of GeoId indices.
* Helper functions addConstraint/createconstraint to create new constraints and move them
into the Constraint property
* New getGeometry with templated return type defaulting to Part::Geometry.
=====================================================
New Coin Marker layer intended to temporarely highlight sections of the 3D View for information purposes.
Independent from the actual redrawing of the geometry and constraints.
====================================================
This function takes parameters named GeoId, which evoke the Sketcher GeoId and which
indeed are used by the sketcher. However, these indices are just indices of the provided
geometry list. Therefore:
1. The are never negative (no matter if a corresponding Sketcher GeoId is external or not).
2. They do not have reserved indices for axes.
3. Most importantly, not found GeoId1 and GeoId2 are coded as -1, which for the Sketcher has
a well defined meaning (axis), whereas the Sketcher uses Constraint::GeoUndef as undefined or
not present/ not found index, which currently is -2000.
For these reasons, it was judged appropriate to rename the parameters and documentation to
emphasise that this function is unrelated and dettached from any Sketcher knowledge, and that
indices are just normal indices of a vector.
============================================================================================
On creation of a constraint from the UI (toolbar/menu):
1. if a PointOnObject constraint preexisted the addition of an
edge-to-edge tangency, substitute it with a point-to-edge tangency.
2. if an edge-to-edge tangency preexisted, addition of a PointOnObject
results in a substitution of the edge-to-edge tangency with an edge-to-curve
tangency.
Bonus:
- Refactor of this with preexisting coincident+tangent substitution.
- Activate both substitutions in continuous constraint addition mode.
