Abdullah Tahiri
5fe623beb5
Sketcher: Expose Internal Geometry for BSplines
...
===============================================
New convenience for the user. If the first pole is radius length constraint, then any newly exposed internal geometry is created with equality constraint to the first pole.
This is really convenient in the case the user is working with polynomic bsplines, as any operation involving losing/gaining a pole (for example increase in multiplicity of a knot).
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
28396fdd54
Sketcher: Assertion on solver bspline control point creation to expose any potential index miscalculation and memory overflow
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
af71924a98
Sketcher: Increase multiplicity command - no creation of unsolicited internal geometry
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
c260e2d2b7
Sketcher: Fixing crash on undoing knot multiplicity increase
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
1e8181cbe0
Sketcher: TestSketcherApp.py fix AppConveyor sporadic failures
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
6a451abb8b
Sketcher: Curvature comb general representation scale fix
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
301d50771d
Sketcher: Cleaning up BSpline knot multiplicity increase SketchObject implementation
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
2c53237492
Part: Fixing signed vs unsigned warning
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
a34ada692d
Sketcher: BSpline creation adapted to the more flexible python constructor
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
084e375b2a
Part: BSplineCurve Python creation change for greater flexibility
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
7a2760695a
Sketcher: SketchObject - Python command to increase knot multiplicity
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
929c825791
Sketcher: SketchObject functionality to increase knot multiplicity
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
6f46ce747b
Sketcher: Enable reuse of constraint helper functions in other toolbars
...
=======================================================================
bool checkBothExternal(int GeoId1, int GeoId2);
void getIdsFromName(const std::string &name, const Sketcher::SketchObject* Obj, int &GeoId, Sketcher::PointPos &PosId);
bool inline isVertex(int GeoId, Sketcher::PointPos PosId);
bool inline isEdge(int GeoId, Sketcher::PointPos PosId);
bool isSimpleVertex(const Sketcher::SketchObject* Obj, int GeoId, Sketcher::PointPos PosId);
bool IsPointAlreadyOnCurve(int GeoIdCurve, int GeoIdPoint, Sketcher::PointPos PosIdPoint, Sketcher::SketchObject* Obj);
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
0a9e647a01
Sketcher: Add toolbar command to increase knot multiplicity
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
6301b814ee
Part: GeomBSpline enable direct construction from parameters
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
298e962d26
Part: GeomBSplineCurve extension to get, increase or reduce multiplicity
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
f36721e529
Sketcher: Enable showing knots on BSpline creation
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
77e1d1327c
Sketcher: Bspline toolbar command show/hide knot multiplicity geometry information layer
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
e9c508f467
Sketcher: Bspline knot multiplicity geometry information layer
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
6b81627949
Sketcher: Bspline - SketchObject - Delete Unused geometry extended to knots
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
8199b685a7
Part: Geometry - Ensure that no point is set as construction by mistake/user mistake
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
aaeb0c3407
Sketcher: Ensure that no point is set as construction by mistake/user mistake
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
33be143f48
Sketcher: Solver bypass of knotpoints
...
Internal geometry knot points, which were added as fixed parameters to the solver according to a previous commit, are tracked in the corresponding bspline as solver level,
without being a parameter to the solver, and upon solving, the position thereof is updated by means of OCC functionality.
This allows to show the knot points and solidarily move them when moving a bspline.
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
65b7e606e5
Sketcher: Construction points added as fixed parameters
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
e66187695f
Sketcher: SketchObject Expose internal geometry extended to knots
...
=================================================================
Very important remark:
Until now, points could not be construction = true.
For now on, if a point is construction = true, the solver will ignore it.
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
0cf81e2d1f
Part: Geometry add support for getting the number of knots in a B-Spline
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
c46c66d48a
Sketcher: Bspline solver knot support - unfinished
2017-04-08 12:58:06 +02:00
Abdullah Tahiri
98baf57e18
Sketcher: Elements widget external geometry identification fix
2017-04-08 12:58:06 +02:00
Yorik van Havre
d410d99f4a
Draft: Fixed buggy Trimex in non-XY planes
2017-04-07 16:03:35 -03:00
wmayer
2a22e06a5c
add unit test to check for order of nodes of quadratic mesh elements
2017-04-07 20:51:02 +02:00
wmayer
1cbfbb84d3
set enum size dependent on word size
2017-04-07 20:51:02 +02:00
Yorik van Havre
1c259fa70b
Draft: Better block handling in dxf import & export
2017-04-07 14:08:09 -03:00
Sabin Iacob
3d442e1ea8
path: Look up the parent job, set units accordingly for each selected object
2017-04-07 16:02:43 +02:00
Sabin Iacob
e7a1fdb428
Make linuxcnc_post use the job unit system and output <unit>/min
2017-04-07 16:02:43 +02:00
wmayer
6840b7a2e1
avoid possibly crash when trying to add objects to the wrong document
2017-04-07 15:32:22 +02:00
wmayer
2bb5f432d3
properly close task dialog when document is getting closed
2017-04-07 15:16:04 +02:00
wmayer
e4cba8e80f
add new signal to Document class for convinience and add method to DocumentObserver
2017-04-07 15:14:45 +02:00
wmayer
9637dcbd44
close sketch selection task panel on undo
2017-04-07 13:07:52 +02:00
wmayer
c241c5b309
perform auto view fit when creating body object on sketch creation
2017-04-07 10:22:40 +02:00
Yorik van Havre
744a9b3590
Arch/Draft: Autoselect results of Up/downgrade and arch component
2017-04-06 18:08:39 -03:00
Ian Rees
3f9aead061
Make Body object on creation of Sketch/Primitive
2017-04-06 19:26:19 +02:00
Ian Rees
c51f4ff4c6
Add abort method to PartDesign TaskDlgFeaturePick
2017-04-06 19:26:19 +02:00
Ian Rees
a22480d3ef
Refactor PartDesign create primitive commands
2017-04-06 19:26:19 +02:00
wmayer
692dda9082
fix crash when trying to drag and drop origin object in body object
2017-04-06 19:16:27 +02:00
Yorik van Havre
10ad6c6d02
Draft: Hold snapping points
...
When drawing (snapping) using the Draft module, it is now possible
to press the Q key to record points. Additional snap locations then
become available orthogonally to these hold points.
2017-04-05 19:04:05 -03:00
Yorik van Havre
0b398559ab
Arch: Rebars can now be based on any wire, not only sketches
2017-04-05 17:25:57 -03:00
Yorik van Havre
779d2658aa
Added App::PropertyPlacementList
2017-04-05 17:22:51 -03:00
Alexander Gryson
16ef532113
Spin icon a little after forum feedback
2017-04-05 16:09:03 -03:00
Zheng, Lei
8f2aaa0934
TreeView: fix tree view performance
...
It seems on some system calling QTreeWidgetItem::takeChildren and then
addChild back is expensive. This fix avoids that but still keeps track
of item order in claimed children
2017-04-05 19:41:16 +02:00
Yorik van Havre
0c717322b4
AddonManager: Misc fixes
...
* Fixed wrong WB description
* Enabled list sorting
* Blacklisted FCGear macro (it is a WB now)
2017-04-05 13:42:31 -03:00
