+ remove unneeded class members from EditData class
+ do not include ui-header from within header files
+ fix possible memory leak in EditDatumDialog
+ when canceling dialog make sure sketch will be updated
This integrates the ability to manage dimensional constraint driving/driven status
in the constraint edition dialog box.
It adds a checkbox in the dialog to show/select whether a constraint is driving or
driven. When the constraint value is modified, it is automatically set as driving.
Main focus is to allow to edit name (alias) of reference (driven) constraints
directly in the constraint edition box.
Resolves#3793, #3978
New feature: Limit 3D Surface op to selected faces.
Disabled the IgnoreWaste feature, until it can be made compatible with new features.
New feature: Face avoidance using new `AvoidLastXFaces` property.
New cut patterns: `Circular` and `CircularZigZag`. New patterns include customizable center point and optional optimizations. Implemented G2/G3 gcode commands.
New feature: Safe travel for transitional paths. New methods to allow safe travel over stock, cut area, and avoided features.
New feature: Start point for operation. Choose a custom XY start point for the operation.
Restructure code to improve management and prepare for separation of the `Waterline` algorithm into an independent operation in the PathWB.
New feature: `ProfileEdges`. Allows the user to profile the edges(boundary) of the selected face(s) with or without cutting the entire face area.
Add my name to the `Credits` tab in the `About FreeCAD` documentation.
Added new feature and property: `CutPatternReversed`. This will make Circular, Line, and ZigZag patterns work in reverse order - outside to inside.
PathSurface: Add select-face(s) feature and other improvements
New feature: Limit 3D Surface op to selected faces.
Disabled the IgnoreWaste feature, until it can be made compatible with new features.
New feature: Face avoidance using new `AvoidLastXFaces` property.
New cut patterns: `Circular` and `CircularZigZag`. New patterns include customizable center point and optional optimizations. Implemented G2/G3 gcode commands.
New feature: Safe travel for transitional paths. New methods to allow safe travel over stock, cut area, and avoided features.
New feature: Start point for operation. Choose a custom XY start point for the operation.
Restructure code to improve management and prepare for separation of the `Waterline` algorithm into an independent operation in the PathWB.
New feature: `ProfileEdges`. Allows the user to profile the edges(boundary) of the selected face(s) with or without cutting the entire face area.
Add my name to the `Credits` tab in the `About FreeCAD` documentation.
- DlgPrefsTechDraw3.ui: improve wording as discussed
- TaskCL2Lines.ui: morph option to QCheckBox
- TaskCenterLine.cpp: the Aligned option is not available for face mode
- TaskCenterLine.ui: use same default line style as in prefs
- TaskCenterLine.ui: correct tooltip for align option
This post has been created because Mach is unable to use constant velocity mode with G0 resulting in jerky movement when using adaptive paths. This post converts the G0 moves to G1 and uses the tool controllers rapid speeds.
