Forum topic:
https://forum.freecad.org/viewtopic.php?t=81997
Additionally:
* Fixed offset and extrusion for non-planar faces.
* Improved the addSubobjects function,
* Cleaned up the code a little bit.
Related issue:
#5603
Previous PR:
#11010
* This PR implements the new PlaneGui class for the Draft_SelectPlane command.
* As mentioned in the previous PR, almost all working plane related code has been removed from gui_selectplane.py.
* The task panel has a new button "Next" to switch to the next working plane in the history.
* Both the "Previous" and "Next" buttons are only enabled if there is a corresponding step in the history.
* PlaneGui stores a working plane per 3D view, but the other commands have to be updated before that system is fully functional.
* Code to update the toolbar when switching to a different view will be added later.
Forum topic:
https://forum.freecad.org/viewtopic.php?t=81956
This PR basically reverts PR #10556.
The angular offset required for the Draft_Arc command is handled in the gui_arc.py file instead. Also removed the unused `urotated` variable from that file.
Steps to verify the issue:
1. Open FreeCAD.
2. Switch to Std_ViewTop.
3. Click one of the curved arrows of the Navigation Cube.
4. Switch to the Draft WB.
5. Make sure Draft_SelectPlane is set to "Auto".
6. Start Draft_Arc and click 2 points (for the radius and the start angle).
7. Result: The displayed arc does not match the start angle or the current point.
Additonally:
* Removed the normal argument from `__init__`. The tracker does not work properly with just a normal. AFAICT there is no code that specifies this normal.
* Minor improvement to `getAngle`: Switched the vectors.
The get_support function did not work for objects nested in, for example, Std_Parts.
Additionally improved and cleaned up the code, and reduced the docstrings.
It makes sense to have this attribute. It will also facilitate the coming work related to the Plane class.
Additionally: Removed the `not self.doc` check from `Activated` as `IsActive` already handles this.
* Add offset options to Draft PathArray
Allows user to specify a starting and ending offset to items in Draft PathArrays.
* [Draft] path array offset
---------
Co-authored-by: Roy-043 <info@b-k-g.nl>
- If grid is on and auto grid on: Grid always appears
- If grid is on and auto grid off: Grid off at start, on when using a tool, off afterwards
- If grid is off: Grid never appears
