* Assembly: Fix translatable strings
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* FEM: Add hint about selectable geometry types in 'Geometry reference selector'
* FEM: Harmonize selection hint in FEM Task dialogs
[pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
FEM: Add translation support, correct selectable geometry
FEM: Harmonize selection hint in FEM Task dialogs
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
This updates the logic that had special handling for planes for the
temporary visibility feature of sketcher which was mishandled after move
to core datums.
This also fixes "comparison of integer expressions of different
signedness: ‘int’ and ‘size_t’" warning.
Fixes: 5d2037c820 ("PartDesign: Transform rework")
* BIM: fix linked document of BIM_Library task panel
Fixes#22437.
The task panel of the BIM_Library command would be linked to the active document, which would to be the temporary Viewer document if that option was checked. Closing that document in the `Insert` function would therefore also close the task panel resulting in errors for following code.
Additionally:
The code to close the temporary Viewer document was moved to the `Reject` function. Otherwise that document would stay open if the task panel was closed without inserting.
With PR 19114 the commands to create PD datum objects are replaced with
the counterparts of Part. However, PD datum objects are much more powerful
than the Part datum objects.
(see e.g. https://forum.freecad.org/viewtopic.php?p=806960)
So, this change brings these commands back to the task panel.
The only difference between groove and revolution is that for the former
the revolved face is removed from the base shape instead of added.
Thus, the code of the Revolution and Groove classes should be almost
identical. This allows it in a further step to refactor the code and
make a common base class.
This fixes issue 18842.
* Allow a minimum angle of 0.0 as this is needed in 'Two Angles' mode
* Set the default value of Angle2 to 0.0
* Check for valid input in 'Angle' and 'Two Angles' mode
* Replace the confusing enum labels 'Dimension' and 'TwoDimensions'
* Sketcher: Fix crash on Sketcher.Constraint
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Sketcher: Slot tool: clean vertical/horizontal mess.
* Update DrawSketchHandlerSlot.h
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Update DrawSketchHandlerSlot.h
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Clean removeRedundantHorizontalVertical
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Fem: Remove pipeline from analysis highlighter - fixes#23466
* FEM: Clean up lint
---------
Co-authored-by: Chris Hennes <chennes@pioneerlibrarysystem.org>
CAM/App/PathSegmentWalker.cpp
- Add G74 to drill/tap/bore G-code recognition for tapping cycles
CAM/InitGui.py
- Move CAM_Tapping command behind experimental feature flag
- Only group drilling/tapping commands if both are enabled
CAM/Path/Base/Generator/tapping.py
- Add pitch and spindle_speed parameters to tapping.generate
- Output S (spindle speed) and F (pitch) in generated G-code
CAM/Path/Op/Tapping.py
- Require Pitch property for tap tools and SpindleSpeed for tool controllers
- Pass pitch and spindle speed to tapping.generate
- Use SpindleDirection to determine right/left hand tap
CAM/Path/Post/scripts/linuxcnc_post.py
- Handle G84/G74 tapping cycles: convert pitch and spindle speed to feed rate
- Remove F and S from output and recalculate F as needed
CAM/Path/Tool/shape/models/tap.py
- Add Pitch property to ToolBitShapeTap schema
- CAM/Path/Tool/toolbit/models/tap.py
- Show pitch and rotation in tap tool summary
- Use is_imperial_pitch to format pitch as TPI or mm
CAM/Path/Tool/toolbit/util.py
- Add is_imperial_pitch utility to classify pitch as imperial or metric
CAM/Tools/Bit/375-16_Tap.fctb
- Remove unused parameters (Coating, Rotation, TPI, Type)
- Keep only relevant tap parameters for new schema
