Updated ts files
This commit is contained in:
Yorik van Havre
@@ -3228,10 +3228,6 @@ You can also use the form: John Doe <john@doe.com></source>
|
||||
</context>
|
||||
<context>
|
||||
<name>Gui::Dialog::DlgSettingsLazyLoaded</name>
|
||||
<message>
|
||||
<source>Unloaded Workbenches</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Workbench Name</source>
|
||||
<translation type="unfinished"></translation>
|
||||
@@ -3248,6 +3244,10 @@ You can also use the form: John Doe <john@doe.com></source>
|
||||
<source><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html></source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Available Workbenches</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Gui::Dialog::DlgSettingsLazyLoadedImp</name>
|
||||
@@ -4435,31 +4435,31 @@ The 'Status' column shows whether the document could be recovered.</so
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Around y-axis:</source>
|
||||
<source>Pitch (around y-axis):</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Around z-axis:</source>
|
||||
<source>Roll (around x-axis):</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Around x-axis:</source>
|
||||
<source>Yaw (around z-axis):</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Rotation around the x-axis</source>
|
||||
<source>Yaw (around z-axis)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Rotation around the y-axis</source>
|
||||
<source>Pitch (around y-axis)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Rotation around the z-axis</source>
|
||||
<source>Roll (around the x-axis)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Euler angles (xy'z'')</source>
|
||||
<source>Euler angles (zy'x'')</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
@@ -5973,6 +5973,18 @@ Do you want to specify another directory?</source>
|
||||
<source>Vietnamese</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Bulgarian</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Greek</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Spanish, Argentina</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Gui::TreeDockWidget</name>
|
||||
@@ -6919,6 +6931,34 @@ Document: </source>
|
||||
Physical path: </source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Could not save document</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details:
|
||||
|
||||
"%1"
|
||||
|
||||
Would you like to save the file with a different name?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Document not saved</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>The document%1 could not be saved. Do you want to cancel closing it?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>%1 Document(s) not saved</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Some documents could not be saved. Do you want to cancel closing?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>SelectionFilter</name>
|
||||
@@ -9719,6 +9759,10 @@ Do you still want to proceed?</source>
|
||||
<source>Special Ops</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>Axonometric</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>testClass</name>
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
<context>
|
||||
<name>AddonInstaller</name>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="531"/>
|
||||
<location filename="addonmanager_workers.py" line="535"/>
|
||||
<source>Installed location</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -96,97 +96,97 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="734"/>
|
||||
<location filename="addonmanager_workers.py" line="738"/>
|
||||
<source>Outdated GitPython detected, consider upgrading with pip.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="292"/>
|
||||
<location filename="addonmanager_workers.py" line="296"/>
|
||||
<source>List of macros successfully retrieved.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="647"/>
|
||||
<location filename="addonmanager_workers.py" line="651"/>
|
||||
<source>Retrieving description...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="387"/>
|
||||
<location filename="addonmanager_workers.py" line="391"/>
|
||||
<source>Retrieving info from</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="529"/>
|
||||
<location filename="addonmanager_workers.py" line="533"/>
|
||||
<source>An update is available for this addon.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="517"/>
|
||||
<location filename="addonmanager_workers.py" line="521"/>
|
||||
<source>This addon is already installed.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="649"/>
|
||||
<location filename="addonmanager_workers.py" line="653"/>
|
||||
<source>Retrieving info from git</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="652"/>
|
||||
<location filename="addonmanager_workers.py" line="656"/>
|
||||
<source>Retrieving info from wiki</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="696"/>
|
||||
<location filename="addonmanager_workers.py" line="700"/>
|
||||
<source>GitPython not found. Using standard download instead.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="701"/>
|
||||
<location filename="addonmanager_workers.py" line="705"/>
|
||||
<source>Your version of python doesn't appear to support ZIP files. Unable to proceed.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="782"/>
|
||||
<location filename="addonmanager_workers.py" line="786"/>
|
||||
<source>Workbench successfully installed. Please restart FreeCAD to apply the changes.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="831"/>
|
||||
<location filename="addonmanager_workers.py" line="835"/>
|
||||
<source>Missing workbench</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="840"/>
|
||||
<location filename="addonmanager_workers.py" line="844"/>
|
||||
<source>Missing python module</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="850"/>
|
||||
<location filename="addonmanager_workers.py" line="854"/>
|
||||
<source>Missing optional python module (doesn't prevent installing)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="853"/>
|
||||
<location filename="addonmanager_workers.py" line="857"/>
|
||||
<source>Some errors were found that prevent to install this workbench</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="855"/>
|
||||
<location filename="addonmanager_workers.py" line="859"/>
|
||||
<source>Please install the missing components first.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="876"/>
|
||||
<location filename="addonmanager_workers.py" line="880"/>
|
||||
<source>Error: Unable to download</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="889"/>
|
||||
<location filename="addonmanager_workers.py" line="893"/>
|
||||
<source>Successfully installed</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="306"/>
|
||||
<location filename="addonmanager_workers.py" line="310"/>
|
||||
<source>GitPython not installed! Cannot retrieve macros from git</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -206,72 +206,72 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="661"/>
|
||||
<location filename="addonmanager_workers.py" line="665"/>
|
||||
<source>This macro is already installed.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="795"/>
|
||||
<location filename="addonmanager_workers.py" line="799"/>
|
||||
<source>A macro has been installed and is available under Macro -> Macros menu</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="543"/>
|
||||
<location filename="addonmanager_workers.py" line="547"/>
|
||||
<source>This addon is marked as obsolete</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="547"/>
|
||||
<location filename="addonmanager_workers.py" line="551"/>
|
||||
<source>This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="869"/>
|
||||
<location filename="addonmanager_workers.py" line="873"/>
|
||||
<source>Error: Unable to locate zip from</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="315"/>
|
||||
<location filename="addonmanager_workers.py" line="319"/>
|
||||
<source>Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="555"/>
|
||||
<location filename="addonmanager_workers.py" line="559"/>
|
||||
<source>This addon is marked as Python 2 Only</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="560"/>
|
||||
<location filename="addonmanager_workers.py" line="564"/>
|
||||
<source>This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="723"/>
|
||||
<location filename="addonmanager_workers.py" line="727"/>
|
||||
<source>User requested updating a Python 2 workbench on a system running Python 3 - </source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="759"/>
|
||||
<location filename="addonmanager_workers.py" line="763"/>
|
||||
<source>Workbench successfully updated. Please restart FreeCAD to apply the changes.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="767"/>
|
||||
<location filename="addonmanager_workers.py" line="771"/>
|
||||
<source>User requested installing a Python 2 workbench on a system running Python 3 - </source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="339"/>
|
||||
<location filename="addonmanager_workers.py" line="343"/>
|
||||
<source>Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="429"/>
|
||||
<location filename="addonmanager_workers.py" line="433"/>
|
||||
<source>Raw markdown displayed</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="addonmanager_workers.py" line="431"/>
|
||||
<location filename="addonmanager_workers.py" line="435"/>
|
||||
<source>Python Markdown library is missing.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -865,7 +865,7 @@ beyond the dimension line</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="view_layer.py" line="77"/>
|
||||
<location filename="view_layer.py" line="66"/>
|
||||
<source>If it is true, the objects contained within this layer will adopt the line color of the layer</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1063,6 +1063,11 @@ Use 'arch' to force US arch notation</source>
|
||||
<source>If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="view_layer.py" line="77"/>
|
||||
<source>If it is true, the objects contained within this layer will adopt the shape color of the layer</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Dialog</name>
|
||||
@@ -1402,27 +1407,27 @@ from menu Tools -> Addon Manager</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="244"/>
|
||||
<location filename="init_draft_statusbar.py" line="252"/>
|
||||
<source>Toggles Grid On/Off</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="262"/>
|
||||
<location filename="init_draft_statusbar.py" line="270"/>
|
||||
<source>Object snapping</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="294"/>
|
||||
<location filename="init_draft_statusbar.py" line="302"/>
|
||||
<source>Toggles Visual Aid Dimensions On/Off</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="314"/>
|
||||
<location filename="init_draft_statusbar.py" line="322"/>
|
||||
<source>Toggles Ortho On/Off</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="332"/>
|
||||
<location filename="init_draft_statusbar.py" line="340"/>
|
||||
<source>Toggles Constrain to Working Plane On/Off</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2776,12 +2781,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren&
|
||||
<context>
|
||||
<name>Draft_Snap</name>
|
||||
<message>
|
||||
<location filename="gui_snapper.py" line="1535"/>
|
||||
<location filename="gui_snapper.py" line="1529"/>
|
||||
<source>Toggles Grid On/Off</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="gui_snapper.py" line="1536"/>
|
||||
<location filename="gui_snapper.py" line="1530"/>
|
||||
<source>Toggle Draft Grid</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -5079,7 +5084,7 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
|
||||
<context>
|
||||
<name>Workbench</name>
|
||||
<message>
|
||||
<location filename="gui_snapper.py" line="1476"/>
|
||||
<location filename="gui_snapper.py" line="1470"/>
|
||||
<source>Draft Snap</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -6152,17 +6157,17 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="147"/>
|
||||
<location filename="init_draft_statusbar.py" line="155"/>
|
||||
<source>custom</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="133"/>
|
||||
<location filename="init_draft_statusbar.py" line="141"/>
|
||||
<source>Unable to convert input into a scale factor</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="init_draft_statusbar.py" line="151"/>
|
||||
<location filename="init_draft_statusbar.py" line="159"/>
|
||||
<source>Set custom annotation scale in format x:x, x=x</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -74,11 +74,6 @@
|
||||
<source>Geometry reference selector for a</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
|
||||
<source>Geometry reference selector for a </source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="251"/>
|
||||
<source>Add</source>
|
||||
@@ -134,6 +129,11 @@
|
||||
<source>Solid</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
|
||||
<source>Geometry reference selector for a </source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>SolidSelector</name>
|
||||
|
||||
@@ -488,7 +488,19 @@ A value in the range of 0.2-10.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../Tessellation.cpp" line="234"/>
|
||||
<location filename="../../Tessellation.cpp" line="247"/>
|
||||
<source>You have selected a body without tip.
|
||||
Either set the tip of the body or select a different shape, please.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../Tessellation.cpp" line="251"/>
|
||||
<source>You have selected a shape without faces.
|
||||
Select a different shape, please.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../Tessellation.cpp" line="255"/>
|
||||
<source>Select a shape for meshing, first.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -248,6 +248,16 @@ It will create a 'Compound Filter' for each shape.</source>
|
||||
</context>
|
||||
<context>
|
||||
<name>Part_SplitFeatures</name>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
|
||||
<source>Boolean Fragments</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
|
||||
<source>Split objects where they intersect</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="188"/>
|
||||
<source>Boolean fragments</source>
|
||||
@@ -325,16 +335,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to
|
||||
<source>Slice to compound</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
|
||||
<source>Boolean Fragments</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
|
||||
<source>Split objects where they intersect</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../BOPTools/SplitFeatures.py" line="349"/>
|
||||
<source>Slice a selected object by using other objects as cutting tools.
|
||||
|
||||
@@ -8,36 +8,6 @@
|
||||
<source>Show the temporary path construction objects when module is in DEBUG mode.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
|
||||
<source>The direction along which dropcutter lines are created</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
|
||||
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
|
||||
<source>Step over percentage of the drop cutter path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
|
||||
<source>Z-axis offset from the surface of the object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
|
||||
<source>The Sample Interval. Small values cause long wait times</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
|
||||
<source>Enable optimization which removes unnecessary points from G-Code output</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="124"/>
|
||||
<source>Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot.</source>
|
||||
@@ -48,36 +18,11 @@
|
||||
<source>Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
|
||||
<source>The completion mode for the operation: single or multi-pass</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
|
||||
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="135"/>
|
||||
<source>Stop index(angle) for rotational scan</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
|
||||
<source>Ignore areas that proceed below specified depth.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
|
||||
<source>Depth used to identify waste areas to ignore.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
|
||||
<source>Cut through waste to depth at model edge, releasing the model.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="131"/>
|
||||
<source>Dropcutter lines are created parallel to this axis.</source>
|
||||
@@ -243,11 +188,6 @@
|
||||
<source>The path to be copied</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileEdges.py" line="56"/>
|
||||
<source>The base geometry of this toolpath</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileEdges.py" line="70"/>
|
||||
<source>The tool controller that will be used to calculate the path</source>
|
||||
@@ -568,6 +508,11 @@
|
||||
<source>Extra offset to apply to the operation. Direction is operation dependent.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathPocket.py" line="55"/>
|
||||
<source>The library to use to generate the path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathPocket.py" line="78"/>
|
||||
<source>Start pocketing at center or boundary</source>
|
||||
@@ -668,6 +613,11 @@
|
||||
<source>A material for this object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileBase.py" line="62"/>
|
||||
<source>Controls how tool moves around corners. Default=Round</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileBase.py" line="64"/>
|
||||
<source>Maximum distance before a miter join is truncated</source>
|
||||
@@ -699,13 +649,63 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathPocket.py" line="55"/>
|
||||
<source>The library to use to generate the path</source>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
|
||||
<source>The direction along which dropcutter lines are created</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileBase.py" line="62"/>
|
||||
<source>Controls how tool moves around corners. Default=Round</source>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
|
||||
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
|
||||
<source>Step over percentage of the drop cutter path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
|
||||
<source>Z-axis offset from the surface of the object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
|
||||
<source>The Sample Interval. Small values cause long wait times</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
|
||||
<source>Enable optimization which removes unnecessary points from G-Code output</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
|
||||
<source>The completion mode for the operation: single or multi-pass</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
|
||||
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
|
||||
<source>Ignore areas that proceed below specified depth.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
|
||||
<source>Depth used to identify waste areas to ignore.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
|
||||
<source>Cut through waste to depth at model edge, releasing the model.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfileEdges.py" line="56"/>
|
||||
<source>The base geometry of this toolpath</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
@@ -987,13 +987,13 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
|
||||
<source>Invalid Cutting Edge Angle %.2f, must be >0° and <=180°</source>
|
||||
<location filename="PathUtils.py" line="762"/>
|
||||
<source>Invalid Cutting Edge Angle %.2f, must be <90° and >=0°</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathUtils.py" line="762"/>
|
||||
<source>Invalid Cutting Edge Angle %.2f, must be <90° and >=0°</source>
|
||||
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
|
||||
<source>Invalid Cutting Edge Angle %.2f, must be >0° and <=180°</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
@@ -1121,6 +1121,31 @@
|
||||
<source>Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
|
||||
<source>Face appears misaligned after initial rotation.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
|
||||
<source>Consider toggling the 'InverseAngle' property and recomputing.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
|
||||
<source>Multiple faces in Base Geometry.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
|
||||
<source>Depth settings will be applied to all faces.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
|
||||
<source>EnableRotation property is 'Off'.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="250"/>
|
||||
<source>Unable to create path for face(s).</source>
|
||||
@@ -1217,31 +1242,6 @@ Increased to stock top.</source>
|
||||
<source>Selected feature(s) require 'Enable Rotation: B(y)' for access.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
|
||||
<source>Face appears misaligned after initial rotation.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
|
||||
<source>Consider toggling the 'InverseAngle' property and recomputing.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
|
||||
<source>Multiple faces in Base Geometry.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
|
||||
<source>Depth settings will be applied to all faces.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
|
||||
<source>EnableRotation property is 'Off'.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathDeburrGui.py" line="65"/>
|
||||
<source>Ignoring non-horizontal Face</source>
|
||||
@@ -1982,6 +1982,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
</context>
|
||||
<context>
|
||||
<name>PathPocket</name>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
|
||||
<source>Pocket Shape</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
|
||||
<source>Creates a Path Pocket object from a face or faces</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="144"/>
|
||||
<source>Normal</source>
|
||||
@@ -2032,16 +2042,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Final depth set below ZMin of face(s) selected.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
|
||||
<source>Pocket Shape</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
|
||||
<source>Creates a Path Pocket object from a face or faces</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathPocketGui.py" line="44"/>
|
||||
<source>3D Pocket</source>
|
||||
@@ -2175,13 +2175,13 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathProfile.py" line="860"/>
|
||||
<source>For open edges, verify Final Depth for this operation.</source>
|
||||
<location filename="PathProfile.py" line="670"/>
|
||||
<source>Check edge selection and Final Depth requirements for profiling open edge(s).</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathProfile.py" line="670"/>
|
||||
<source>Check edge selection and Final Depth requirements for profiling open edge(s).</source>
|
||||
<location filename="../../../PathScripts/PathProfile.py" line="860"/>
|
||||
<source>For open edges, verify Final Depth for this operation.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
@@ -3452,16 +3452,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_Dressup</name>
|
||||
<message>
|
||||
<location filename="PathDressup.py" line="98"/>
|
||||
<source>Dress-up</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathDressup.py" line="100"/>
|
||||
<source>Creates a Path Dess-up object from a selected path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathDressup.py" line="110"/>
|
||||
<source>Please select one path object
|
||||
@@ -3479,6 +3469,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Please select a Path object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathDressup.py" line="98"/>
|
||||
<source>Dress-up</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathDressup.py" line="100"/>
|
||||
<source>Creates a Path Dess-up object from a selected path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_DressupAxisMap</name>
|
||||
@@ -3951,6 +3951,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Creates a Path Hop object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathHop.py" line="119"/>
|
||||
<source>The selected object is not a path
|
||||
</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathHop.py" line="111"/>
|
||||
<source>Please select one path object</source>
|
||||
@@ -3966,12 +3972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Create Hop</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathHop.py" line="119"/>
|
||||
<source>The selected object is not a path
|
||||
</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_Inspect</name>
|
||||
@@ -4218,11 +4218,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_Sanity</name>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
|
||||
<source>The Job has no selected Base object.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSanity.py" line="71"/>
|
||||
<source>Check the path job for common errors</source>
|
||||
@@ -4473,6 +4468,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Date</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
|
||||
<source>The Job has no selected Base object.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathSanity.py" line="50"/>
|
||||
<source>It appears the machine limits haven't been set. Not able to check path extents.
|
||||
@@ -4628,6 +4628,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_ToolController</name>
|
||||
<message>
|
||||
<location filename="PathToolController.py" line="132"/>
|
||||
<source>Tool Number to Load</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathToolController.py" line="156"/>
|
||||
<source>Add Tool Controller to the Job</source>
|
||||
@@ -4638,11 +4643,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Add Tool Controller</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathToolController.py" line="132"/>
|
||||
<source>Tool Number to Load</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_ToolTable</name>
|
||||
@@ -4669,6 +4669,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Creates a medial line engraving path</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
|
||||
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathVcarve.py" line="309"/>
|
||||
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
|
||||
@@ -4679,11 +4684,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Engraver Cutting Edge Angle must be < 180 degrees.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
|
||||
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Path_Waterline</name>
|
||||
@@ -4718,11 +4718,56 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Save toolbit library</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
|
||||
<source>Tooltable JSON (*.json)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
|
||||
<source>HeeksCAD tooltable (*.tooltable)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
|
||||
<source>LinuxCNC tooltable (*.tbl)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="512"/>
|
||||
<source>Open tooltable</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="TooltableEditor.py" line="610"/>
|
||||
<source>Save tooltable</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
|
||||
<source>Rename Tooltable</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
|
||||
<source>Enter Name:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
|
||||
<source>Add New Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
|
||||
<source>Delete Selected Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
|
||||
<source>Rename Selected Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="TooltableEditor.py" line="388"/>
|
||||
<source>Tooltable editor</source>
|
||||
@@ -4933,11 +4978,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="TooltableEditor.py" line="610"/>
|
||||
<source>Save tooltable</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="TooltableEditor.py" line="610"/>
|
||||
<source>Tooltable XML (*.xml)</source>
|
||||
@@ -4953,46 +4993,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
|
||||
<source>Object doesn't have a tooltable property</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
|
||||
<source>Rename Tooltable</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
|
||||
<source>Enter Name:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
|
||||
<source>Add New Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
|
||||
<source>Delete Selected Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
|
||||
<source>Rename Selected Tool Table</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
|
||||
<source>Tooltable JSON (*.json)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
|
||||
<source>HeeksCAD tooltable (*.tooltable)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
|
||||
<source>LinuxCNC tooltable (*.tbl)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="PathToolLibraryManager.py" line="514"/>
|
||||
<source>Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl)</source>
|
||||
|
||||
@@ -243,7 +243,7 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../SegmentationManual.cpp" line="234"/>
|
||||
<location filename="../../SegmentationManual.cpp" line="235"/>
|
||||
<source>Segmentation</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -567,7 +567,7 @@
|
||||
<context>
|
||||
<name>ReverseEngineeringGui::TaskSegmentationManual</name>
|
||||
<message>
|
||||
<location filename="../../SegmentationManual.cpp" line="310"/>
|
||||
<location filename="../../SegmentationManual.cpp" line="311"/>
|
||||
<source>Create</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -2652,7 +2652,9 @@ invalid constraints, degenerated geometry, etc.</source>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandSketcherVirtualSpace.cpp" line="163"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="858"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="718"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="951"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="977"/>
|
||||
<source>Update constraint's virtual space</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2662,12 +2664,12 @@ invalid constraints, degenerated geometry, etc.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="621"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="613"/>
|
||||
<source>Swap constraint names</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="843"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="936"/>
|
||||
<source>Rename sketch constraint</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2735,42 +2737,42 @@ invalid constraints, degenerated geometry, etc.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5735"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5728"/>
|
||||
<source>This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5739"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5732"/>
|
||||
<source>BSpline Geometry Index (GeoID) is out of bounds.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5742"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5735"/>
|
||||
<source>You are requesting no change in knot multiplicity.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5747"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5740"/>
|
||||
<source>The Geometry Index (GeoId) provided is not a B-spline curve.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5754"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5747"/>
|
||||
<source>The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5761"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5754"/>
|
||||
<source>The multiplicity cannot be increased beyond the degree of the B-spline.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5764"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5757"/>
|
||||
<source>The multiplicity cannot be decreased beyond zero.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5776"/>
|
||||
<location filename="../../../App/SketchObject.cpp" line="5769"/>
|
||||
<source>OCC is unable to decrease the multiplicity within the maximum tolerance.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -3880,12 +3882,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="612"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="604"/>
|
||||
<source>Unnamed constraint</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="613"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="605"/>
|
||||
<source>Only the names of named constraints can be swapped.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4607,11 +4609,6 @@ Defaults to: %N = %V
|
||||
<source>DimensionalStringFormat</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../SketcherSettingsDisplay.ui" line="269"/>
|
||||
<source>Mod/Sketcher</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../SketcherSettingsDisplay.ui" line="306"/>
|
||||
<source>Visibility automation</source>
|
||||
@@ -4871,11 +4868,6 @@ However, no constraints linking to the endpoints were found.</source>
|
||||
<source>All</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="50"/>
|
||||
<source>Normal</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="55"/>
|
||||
<source>Datums</source>
|
||||
@@ -4891,34 +4883,192 @@ However, no constraints linking to the endpoints were found.</source>
|
||||
<source>Reference</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="70"/>
|
||||
<source>Horizontal</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="75"/>
|
||||
<source>Vertical</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="80"/>
|
||||
<source>Coincident</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="85"/>
|
||||
<source>Point on Object</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="90"/>
|
||||
<source>Parallel</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="95"/>
|
||||
<source>Perpendicular</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="100"/>
|
||||
<source>Tangent</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="105"/>
|
||||
<source>Equality</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="110"/>
|
||||
<source>Symmetric</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="115"/>
|
||||
<source>Block</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="120"/>
|
||||
<source>Distance</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="125"/>
|
||||
<source>Horizontal Distance</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="130"/>
|
||||
<source>Vertical Distance</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="135"/>
|
||||
<source>Radius</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="140"/>
|
||||
<source>Weight</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="145"/>
|
||||
<source>Diameter</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="150"/>
|
||||
<source>Angle</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="155"/>
|
||||
<source>Snell's Law</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="160"/>
|
||||
<source>Internal Alignment</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="195"/>
|
||||
<source>View</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="213"/>
|
||||
<source>Shows all the constraints in the list</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="216"/>
|
||||
<source>Show All</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="235"/>
|
||||
<source>Hides all the constraints in the list</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="238"/>
|
||||
<source>Hide All</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="244"/>
|
||||
<source>Controls visualisation in the 3D view</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="247"/>
|
||||
<source>Automation</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="265"/>
|
||||
<source>Constraint visualisation tracks filter selection so that filtered out constraints are hidden</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="268"/>
|
||||
<source>Track filter selection</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="295"/>
|
||||
<source>Controls widget list behaviour</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="298"/>
|
||||
<source>List</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="347"/>
|
||||
<source>Internal alignments will be hidden</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="78"/>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="350"/>
|
||||
<source>Hide internal alignment</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="94"/>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="316"/>
|
||||
<source>Extended information will be added to the list</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="97"/>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="50"/>
|
||||
<source>Geometric</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.ui" line="319"/>
|
||||
<source>Extended information</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="634"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="626"/>
|
||||
<source>Constraints</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="852"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="868"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="755"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="945"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="961"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="997"/>
|
||||
<location filename="../../TaskSketcherConstrains.cpp" line="1015"/>
|
||||
<source>Error</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -5276,136 +5426,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
|
||||
<context>
|
||||
<name>SketcherGui::ViewProviderSketch</name>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6282"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6291"/>
|
||||
<source>Edit sketch</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6296"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6305"/>
|
||||
<source>A dialog is already open in the task panel</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6297"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6306"/>
|
||||
<source>Do you want to close this dialog?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6311"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6320"/>
|
||||
<source>Invalid sketch</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6312"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6321"/>
|
||||
<source>Do you want to open the sketch validation tool?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6313"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6322"/>
|
||||
<source>The sketch is invalid and cannot be edited.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6528"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6537"/>
|
||||
<source>Please remove the following constraint:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6529"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6538"/>
|
||||
<source>Please remove at least one of the following constraints:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6535"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6544"/>
|
||||
<source>Please remove the following redundant constraint:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6536"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6545"/>
|
||||
<source>Please remove the following redundant constraints:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6542"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6551"/>
|
||||
<source>The following constraint is partially redundant:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6543"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6552"/>
|
||||
<source>The following constraints are partially redundant:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6549"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6558"/>
|
||||
<source>Please remove the following malformed constraint:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6550"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6559"/>
|
||||
<source>Please remove the following malformed constraints:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6585"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6594"/>
|
||||
<source>Empty sketch</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6592"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6601"/>
|
||||
<source>Over-constrained sketch</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6599"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6608"/>
|
||||
<source>Sketch contains malformed constraints</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6606"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6615"/>
|
||||
<source>Sketch contains conflicting constraints</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6614"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6623"/>
|
||||
<source>Sketch contains redundant constraints</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6623"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6632"/>
|
||||
<source>Sketch contains partially redundant constraints</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6593"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6600"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6607"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6615"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6602"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6609"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6616"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6624"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6633"/>
|
||||
<source>(click to select)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6635"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6644"/>
|
||||
<source>Fully constrained sketch</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6642"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6651"/>
|
||||
<source>Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6645"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6654"/>
|
||||
<source>Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6650"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6659"/>
|
||||
<source>Solved in %1 sec</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6653"/>
|
||||
<location filename="../../ViewProviderSketch.cpp" line="6662"/>
|
||||
<source>Unsolved (%1 sec)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -367,6 +367,106 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtensionCircleCenterLines</name>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="90"/>
|
||||
<source>TechDraw</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="91"/>
|
||||
<source>Draw circle center lines</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="92"/>
|
||||
<source>Draw circle center line cross at circles
|
||||
- select many circles or arcs
|
||||
- click this button</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtensionThreadBoltBottom</name>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="324"/>
|
||||
<source>TechDraw</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="325"/>
|
||||
<source>Cosmetic thread bolt bottom view</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="326"/>
|
||||
<source>Draw cosmetic screw thread ground view
|
||||
- select many circles
|
||||
- click this button</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtensionThreadBoltSide</name>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="218"/>
|
||||
<source>TechDraw</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="219"/>
|
||||
<source>Cosmetic thread bolt side view</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="220"/>
|
||||
<source>Draw cosmetic screw thread side view
|
||||
- select two parallel lines
|
||||
- click this button</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtensionThreadHoleBottom</name>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="271"/>
|
||||
<source>TechDraw</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="272"/>
|
||||
<source>Cosmetic thread hole bottom view</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="273"/>
|
||||
<source>Draw cosmetic hole thread ground view
|
||||
- select many circles
|
||||
- click this button</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtensionThreadHoleSide</name>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="165"/>
|
||||
<source>TechDraw</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="166"/>
|
||||
<source>Cosmetic thread hole side view</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="167"/>
|
||||
<source>Draw cosmetic thread hole side view
|
||||
- select two parallel lines
|
||||
- click this button</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>CmdTechDrawExtentGroup</name>
|
||||
<message>
|
||||
@@ -843,7 +943,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../Command.cpp" line="1388"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="878"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="882"/>
|
||||
<source>Save page to dxf</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1752,28 +1852,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="636"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="640"/>
|
||||
<source>PDF (*.pdf)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="637"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="837"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="641"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="841"/>
|
||||
<source>All Files (*.*)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="638"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="642"/>
|
||||
<source>Export Page As PDF</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="836"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="840"/>
|
||||
<source>SVG (*.svg)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="838"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="842"/>
|
||||
<source>Export page as SVG</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1905,17 +2005,71 @@
|
||||
<source>Edit %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="106"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="113"/>
|
||||
<source>TechDraw Circle Centerlines</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="107"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="182"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="235"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="288"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="341"/>
|
||||
<source>Selection is empty</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="114"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="189"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="242"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="295"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="348"/>
|
||||
<source>No object selected</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="181"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="188"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="436"/>
|
||||
<source>TechDraw Thread Hole Side</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="234"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="241"/>
|
||||
<source>TechDraw Thread Bolt Side</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="287"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="294"/>
|
||||
<source>TechDraw Thread Hole Bottom</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="340"/>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="347"/>
|
||||
<source>TechDraw Tread Bolt Bottom</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../CommandExtensionPack.cpp" line="437"/>
|
||||
<source>Please select two straight lines</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>Std_Delete</name>
|
||||
<message>
|
||||
<location filename="../../ViewProviderLeader.cpp" line="253"/>
|
||||
<location filename="../../ViewProviderLeader.cpp" line="257"/>
|
||||
<source>You cannot delete this leader line because
|
||||
it has a weld symbol that would become broken.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderLeader.cpp" line="256"/>
|
||||
<location filename="../../ViewProviderLeader.cpp" line="260"/>
|
||||
<location filename="../../ViewProviderPage.cpp" line="232"/>
|
||||
<location filename="../../ViewProviderProjGroup.cpp" line="201"/>
|
||||
<location filename="../../ViewProviderProjGroup.cpp" line="217"/>
|
||||
@@ -1924,9 +2078,9 @@ it has a weld symbol that would become broken.</source>
|
||||
<location filename="../../ViewProviderProjGroupItem.cpp" line="196"/>
|
||||
<location filename="../../ViewProviderProjGroupItem.cpp" line="204"/>
|
||||
<location filename="../../ViewProviderTemplate.cpp" line="208"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="355"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="363"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="371"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="358"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="366"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="374"/>
|
||||
<location filename="../../ViewProviderWeld.cpp" line="197"/>
|
||||
<source>Object dependencies</source>
|
||||
<translation type="unfinished"></translation>
|
||||
@@ -1938,19 +2092,19 @@ it has a weld symbol that would become broken.</source>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderProjGroupItem.cpp" line="185"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="352"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="355"/>
|
||||
<source>You cannot delete this view because it has a section view that would become broken.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderProjGroupItem.cpp" line="193"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="360"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="363"/>
|
||||
<source>You cannot delete this view because it has a detail view that would become broken.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ViewProviderProjGroupItem.cpp" line="201"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="368"/>
|
||||
<location filename="../../ViewProviderViewPart.cpp" line="371"/>
|
||||
<source>You cannot delete this view because it has a leader line that would become broken.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -3421,49 +3575,49 @@ Fast, but result is a collection of short straight lines.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="730"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="734"/>
|
||||
<source>Different orientation</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="731"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="735"/>
|
||||
<source>The printer uses a different orientation than the drawing.
|
||||
Do you want to continue?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="738"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="742"/>
|
||||
<source>Different paper size</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="739"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="743"/>
|
||||
<source>The printer uses a different paper size than the drawing.
|
||||
Do you want to continue?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="750"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="754"/>
|
||||
<source>Opening file failed</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="751"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="755"/>
|
||||
<source>Can not open file %1 for writing.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="862"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="866"/>
|
||||
<source>Save Dxf File</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="864"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="868"/>
|
||||
<source>Dxf (*.dxf)</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../MDIViewPage.cpp" line="1349"/>
|
||||
<location filename="../../MDIViewPage.cpp" line="1353"/>
|
||||
<source>Selected:</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -128,7 +128,7 @@
|
||||
<context>
|
||||
<name>QObject</name>
|
||||
<message>
|
||||
<location filename="../../AppWebGui.cpp" line="88"/>
|
||||
<location filename="../../AppWebGui.cpp" line="89"/>
|
||||
<location filename="../../BrowserView.cpp" line="713"/>
|
||||
<source>Browser</source>
|
||||
<translation type="unfinished"></translation>
|
||||
|
||||
Reference in New Issue
Block a user