kindred/create
1
1
Fork 0
Code Issues 37 Pull Requests Actions Packages Projects 9 Releases 2 Wiki Activity

Updated ts files

Browse Source
This commit is contained in:
Yorik van Havre
2021-06-17 15:49:33 +02:00
parent 1d3e7fa8f6
commit d12702e588
7 changed files with 545 additions and 488 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/Mod/Arch/Resources/translations/Arch.ts
View File

@@ -3362,7 +3362,7 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="importOBJ.py" line="351"/>
<location filename="importOBJ.py" line="366"/>
<source>Successfully imported</source>
<translation type="unfinished"></translation>
</message>

182
src/Mod/Draft/Resources/translations/Draft.ts
View File

@@ -4949,22 +4949,22 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
<context>
<name>draft</name>
<message>
<location filename="DraftGui.py" line="322"/>
<location filename="DraftGui.py" line="330"/>
<source>Draft Command Bar</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="823"/>
<location filename="DraftGui.py" line="832"/>
<source>Toggle construction mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2057"/>
<location filename="DraftGui.py" line="2054"/>
<source>Autogroup off</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="713"/>
<location filename="DraftGui.py" line="722"/>
<source>active command:</source>
<translation type="unfinished"></translation>
</message>
@@ -4974,52 +4974,52 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="715"/>
<location filename="DraftGui.py" line="724"/>
<source>Active Draft command</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="716"/>
<location filename="DraftGui.py" line="725"/>
<source>X coordinate of next point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1047"/>
<location filename="DraftGui.py" line="1056"/>
<source>X</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="718"/>
<location filename="DraftGui.py" line="727"/>
<source>Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="719"/>
<location filename="DraftGui.py" line="728"/>
<source>Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="720"/>
<location filename="DraftGui.py" line="729"/>
<source>Y coordinate of next point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="721"/>
<location filename="DraftGui.py" line="730"/>
<source>Z coordinate of next point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="722"/>
<location filename="DraftGui.py" line="731"/>
<source>Enter point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="724"/>
<location filename="DraftGui.py" line="733"/>
<source>Enter a new point with the given coordinates</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="725"/>
<location filename="DraftGui.py" line="734"/>
<source>Length</source>
<translation type="unfinished"></translation>
</message>
@@ -5029,42 +5029,42 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="727"/>
<location filename="DraftGui.py" line="736"/>
<source>Length of current segment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="728"/>
<location filename="DraftGui.py" line="737"/>
<source>Angle of current segment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1096"/>
<location filename="DraftGui.py" line="1105"/>
<source>Radius</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1097"/>
<location filename="DraftGui.py" line="1106"/>
<source>Radius of Circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="757"/>
<location filename="DraftGui.py" line="766"/>
<source>If checked, command will not finish until you press the command button again</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="763"/>
<location filename="DraftGui.py" line="772"/>
<source>&amp;OCC-style offset</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="783"/>
<location filename="DraftGui.py" line="792"/>
<source>Sides</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="784"/>
<location filename="DraftGui.py" line="793"/>
<source>Number of sides</source>
<translation type="unfinished"></translation>
</message>
@@ -5074,77 +5074,77 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="650"/>
<location filename="DraftGui.py" line="659"/>
<source>Auto</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="790"/>
<location filename="DraftGui.py" line="799"/>
<source>Text string to draw</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="791"/>
<location filename="DraftGui.py" line="800"/>
<source>String</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="792"/>
<location filename="DraftGui.py" line="801"/>
<source>Height of text</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="793"/>
<location filename="DraftGui.py" line="802"/>
<source>Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="794"/>
<location filename="DraftGui.py" line="803"/>
<source>Intercharacter spacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="795"/>
<location filename="DraftGui.py" line="804"/>
<source>Tracking</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="796"/>
<location filename="DraftGui.py" line="805"/>
<source>Full path to font file:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="797"/>
<location filename="DraftGui.py" line="806"/>
<source>Open a FileChooser for font file</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="935"/>
<location filename="DraftGui.py" line="944"/>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="944"/>
<location filename="DraftGui.py" line="953"/>
<source>DWire</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="962"/>
<location filename="DraftGui.py" line="971"/>
<source>Circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="971"/>
<location filename="DraftGui.py" line="980"/>
<source>Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="978"/>
<location filename="DraftGui.py" line="987"/>
<source>Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1006"/>
<location filename="DraftGui.py" line="1015"/>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
@@ -5154,87 +5154,87 @@ Note: C++ exporter is faster, but is not as featureful yet</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1183"/>
<location filename="DraftGui.py" line="1192"/>
<source>Pick Object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1189"/>
<location filename="DraftGui.py" line="1198"/>
<source>Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1252"/>
<location filename="DraftGui.py" line="1261"/>
<source>Global X</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1253"/>
<location filename="DraftGui.py" line="1262"/>
<source>Global Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1254"/>
<location filename="DraftGui.py" line="1263"/>
<source>Global Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1244"/>
<location filename="DraftGui.py" line="1253"/>
<source>Local X</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1245"/>
<location filename="DraftGui.py" line="1254"/>
<source>Local Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1246"/>
<location filename="DraftGui.py" line="1255"/>
<source>Local Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1487"/>
<location filename="DraftGui.py" line="1496"/>
<source>Invalid Size value. Using 200.0.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1495"/>
<location filename="DraftGui.py" line="1504"/>
<source>Invalid Tracking value. Using 0.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1509"/>
<location filename="DraftGui.py" line="1518"/>
<source>Please enter a text string.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1518"/>
<location filename="DraftGui.py" line="1527"/>
<source>Select a Font file</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1551"/>
<location filename="DraftGui.py" line="1560"/>
<source>Please enter a font file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2377"/>
<location filename="DraftGui.py" line="2374"/>
<source>Faces</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2378"/>
<location filename="DraftGui.py" line="2375"/>
<source>Remove</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2379"/>
<location filename="DraftGui.py" line="2376"/>
<source>Add</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2380"/>
<location filename="DraftGui.py" line="2377"/>
<source>Facebinder elements</source>
<translation type="unfinished"></translation>
</message>
@@ -5256,17 +5256,17 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="736"/>
<location filename="DraftGui.py" line="745"/>
<source>Relative</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="759"/>
<location filename="DraftGui.py" line="768"/>
<source>Continue</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="775"/>
<location filename="DraftGui.py" line="784"/>
<source>Close</source>
<translation type="unfinished"></translation>
</message>
@@ -5311,7 +5311,7 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="781"/>
<location filename="DraftGui.py" line="790"/>
<source>Select edge</source>
<translation type="unfinished"></translation>
</message>
@@ -5326,7 +5326,7 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="777"/>
<location filename="DraftGui.py" line="786"/>
<source>Wipe</source>
<translation type="unfinished"></translation>
</message>
@@ -5341,62 +5341,62 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="732"/>
<location filename="DraftGui.py" line="741"/>
<source>Check this to lock the current angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="746"/>
<location filename="DraftGui.py" line="755"/>
<source>Filled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="752"/>
<location filename="DraftGui.py" line="761"/>
<source>Finish</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="754"/>
<location filename="DraftGui.py" line="763"/>
<source>Finishes the current drawing or editing operation</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="773"/>
<location filename="DraftGui.py" line="782"/>
<source>&amp;Undo (CTRL+Z)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="774"/>
<location filename="DraftGui.py" line="783"/>
<source>Undo the last segment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="776"/>
<location filename="DraftGui.py" line="785"/>
<source>Finishes and closes the current line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="778"/>
<location filename="DraftGui.py" line="787"/>
<source>Wipes the existing segments of this line and starts again from the last point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="779"/>
<location filename="DraftGui.py" line="788"/>
<source>Set WP</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="780"/>
<location filename="DraftGui.py" line="789"/>
<source>Reorients the working plane on the last segment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="782"/>
<location filename="DraftGui.py" line="791"/>
<source>Selects an existing edge to be measured by this dimension</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="787"/>
<location filename="DraftGui.py" line="796"/>
<source>If checked, objects will be copied instead of moved. Preferences -&gt; Draft -&gt; Global copy mode to keep this mode in next commands</source>
<translation type="unfinished"></translation>
</message>
@@ -5406,12 +5406,12 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="788"/>
<location filename="DraftGui.py" line="797"/>
<source>Modify subelements</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="789"/>
<location filename="DraftGui.py" line="798"/>
<source>If checked, subelements will be modified instead of entire objects</source>
<translation type="unfinished"></translation>
</message>
@@ -5446,27 +5446,27 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="798"/>
<location filename="DraftGui.py" line="807"/>
<source>Create text</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="799"/>
<location filename="DraftGui.py" line="808"/>
<source>Press this button to create the text object, or finish your text with two blank lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1031"/>
<location filename="DraftGui.py" line="1040"/>
<source>Offset distance</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1089"/>
<location filename="DraftGui.py" line="1098"/>
<source>Trim distance</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="822"/>
<location filename="DraftGui.py" line="831"/>
<source>Change default style for new objects</source>
<translation type="unfinished"></translation>
</message>
@@ -6754,7 +6754,7 @@ To enabled FreeCAD to download these libraries, answer Yes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1085"/>
<location filename="DraftGui.py" line="1094"/>
<source>Trimex</source>
<translation type="unfinished"></translation>
</message>
@@ -7085,65 +7085,65 @@ The final angle will be the base angle plus this amount.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="741"/>
<location filename="DraftGui.py" line="750"/>
<source>Global</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="739"/>
<location filename="DraftGui.py" line="748"/>
<source>Coordinates relative to last point or to coordinate system origin
if is the first point to set</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="744"/>
<location filename="DraftGui.py" line="753"/>
<source>Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate system</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="750"/>
<location filename="DraftGui.py" line="759"/>
<source>Check this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option &apos;Use Part Primitives&apos; is enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="762"/>
<location filename="DraftGui.py" line="771"/>
<source>If checked, an OCC-style offset will be performedinstead of the classic offset</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1240"/>
<location filename="DraftGui.py" line="1249"/>
<source>Local u0394X</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1241"/>
<location filename="DraftGui.py" line="1250"/>
<source>Local u0394Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1242"/>
<location filename="DraftGui.py" line="1251"/>
<source>Local u0394Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1248"/>
<location filename="DraftGui.py" line="1257"/>
<source>Global u0394X</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1249"/>
<location filename="DraftGui.py" line="1258"/>
<source>Global u0394Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="1250"/>
<location filename="DraftGui.py" line="1259"/>
<source>Global u0394Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="DraftGui.py" line="2050"/>
<location filename="DraftGui.py" line="2047"/>
<source>Autogroup:</source>
<translation type="unfinished"></translation>
</message>

10
src/Mod/Fem/Gui/Resources/translations/Fem.ts
View File

@@ -74,11 +74,6 @@
<source>Geometry reference selector for a</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
<source>Geometry reference selector for a </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="251"/>
<source>Add</source>
@@ -124,6 +119,11 @@
<source>Solid</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../femguiobjects/FemSelectionWidgets.py" line="249"/>
<source>Geometry reference selector for a </source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SolidSelector</name>

20
src/Mod/Part/Gui/Resources/translations/Part.ts
View File

@@ -337,6 +337,16 @@ A &apos;Compound Filter&apos; can be used to extract the individual slices.</sou
<source>Slice apart</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
<source>Boolean Fragments</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
<source>Split objects where they intersect</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="381"/>
<source>Slice a selected object by other objects, and split it apart.
@@ -356,16 +366,6 @@ This means the overlapping volumes of the shapes will be removed.
A &apos;Compound Filter&apos; can be used to extract the remaining pieces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="174"/>
<source>Boolean Fragments</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../BOPTools/SplitFeatures.py" line="176"/>
<source>Split objects where they intersect</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../CompoundTools/_CommandCompoundFilter.py" line="107"/>
<source>Continue</source>

354
src/Mod/Path/Gui/Resources/translations/Path.ts
View File

@@ -8,36 +8,6 @@
<source>Show the temporary path construction objects when module is in DEBUG mode.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
<source>The direction along which dropcutter lines are created</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
<source>Step over percentage of the drop cutter path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
<source>Z-axis offset from the surface of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
<source>The Sample Interval. Small values cause long wait times</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
<source>Enable optimization which removes unnecessary points from G-Code output</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="124"/>
<source>Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot.</source>
@@ -48,36 +18,11 @@
<source>Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
<source>The completion mode for the operation: single or multi-pass</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="135"/>
<source>Stop index(angle) for rotational scan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
<source>Ignore areas that proceed below specified depth.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
<source>Depth used to identify waste areas to ignore.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
<source>Cut through waste to depth at model edge, releasing the model.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="131"/>
<source>Dropcutter lines are created parallel to this axis.</source>
@@ -243,11 +188,6 @@
<source>The path to be copied</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathProfileEdges.py" line="56"/>
<source>The base geometry of this toolpath</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathProfileEdges.py" line="70"/>
<source>The tool controller that will be used to calculate the path</source>
@@ -563,6 +503,11 @@
<source>Extra offset to apply to the operation. Direction is operation dependent.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="55"/>
<source>The library to use to generate the path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="78"/>
<source>Start pocketing at center or boundary</source>
@@ -704,8 +649,63 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathPocket.py" line="55"/>
<source>The library to use to generate the path</source>
<location filename="../../../PathScripts/PathSurface.py" line="73"/>
<source>The direction along which dropcutter lines are created</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="74"/>
<source>Should the operation be limited by the stock object or by the bounding box of the base object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="76"/>
<source>Step over percentage of the drop cutter path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="77"/>
<source>Z-axis offset from the surface of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="78"/>
<source>The Sample Interval. Small values cause long wait times</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="79"/>
<source>Enable optimization which removes unnecessary points from G-Code output</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="129"/>
<source>The completion mode for the operation: single or multi-pass</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="130"/>
<source>The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="141"/>
<source>Ignore areas that proceed below specified depth.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="142"/>
<source>Depth used to identify waste areas to ignore.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSurface.py" line="143"/>
<source>Cut through waste to depth at model edge, releasing the model.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathProfileEdges.py" line="56"/>
<source>The base geometry of this toolpath</source>
<translation type="unfinished"></translation>
</message>
<message>
@@ -987,13 +987,13 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
<source>Invalid Cutting Edge Angle %.2f, must be &gt;0° and &lt;=180°</source>
<location filename="PathUtils.py" line="762"/>
<source>Invalid Cutting Edge Angle %.2f, must be &lt;90° and &gt;=0°</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathUtils.py" line="762"/>
<source>Invalid Cutting Edge Angle %.2f, must be &lt;90° and &gt;=0°</source>
<location filename="../../../PathScripts/PathUtils.py" line="808"/>
<source>Invalid Cutting Edge Angle %.2f, must be &gt;0° and &lt;=180°</source>
<translation type="unfinished"></translation>
</message>
<message>
@@ -1157,6 +1157,31 @@ Increased to stock top.</source>
<source>Ignoring non-horizontal Face</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
<source>Face appears misaligned after initial rotation.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
<source>Consider toggling the &apos;InverseAngle&apos; property and recomputing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
<source>Multiple faces in Base Geometry.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
<source>Depth settings will be applied to all faces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
<source>EnableRotation property is &apos;Off&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="250"/>
<source>Unable to create path for face(s).</source>
@@ -1222,31 +1247,6 @@ Increased to stock top.</source>
<source>Utils</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="135"/>
<source>Face appears misaligned after initial rotation.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="139"/>
<source>Consider toggling the &apos;InverseAngle&apos; property and recomputing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="161"/>
<source>Multiple faces in Base Geometry.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="162"/>
<source>Depth settings will be applied to all faces.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathProfileFaces.py" line="176"/>
<source>EnableRotation property is &apos;Off&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShape.py" line="343"/>
<source>
@@ -1969,6 +1969,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>PathPocket</name>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Pocket Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Creates a Path Pocket object from a face or faces</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="144"/>
<source>Normal</source>
@@ -2019,16 +2029,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Final depth set below ZMin of face(s) selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Pocket Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketShapeGui.py" line="44"/>
<source>Creates a Path Pocket object from a face or faces</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathPocketGui.py" line="44"/>
<source>3D Pocket</source>
@@ -3439,16 +3439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>Path_Dressup</name>
<message>
<location filename="PathDressup.py" line="98"/>
<source>Dress-up</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="100"/>
<source>Creates a Path Dess-up object from a selected path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="110"/>
<source>Please select one path object
@@ -3466,6 +3456,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Please select a Path object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="98"/>
<source>Dress-up</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathDressup.py" line="100"/>
<source>Creates a Path Dess-up object from a selected path</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_DressupAxisMap</name>
@@ -3938,6 +3938,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Creates a Path Hop object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathHop.py" line="119"/>
<source>The selected object is not a path
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathHop.py" line="111"/>
<source>Please select one path object</source>
@@ -3953,12 +3959,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Create Hop</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathHop.py" line="119"/>
<source>The selected object is not a path
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_Inspect</name>
@@ -4205,11 +4205,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>Path_Sanity</name>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
<source>The Job has no selected Base object.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="71"/>
<source>Check the path job for common errors</source>
@@ -4460,6 +4455,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Date</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathSanity.py" line="64"/>
<source>The Job has no selected Base object.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathSanity.py" line="50"/>
<source>It appears the machine limits haven&apos;t been set. Not able to check path extents.
@@ -4615,6 +4615,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
</context>
<context>
<name>Path_ToolController</name>
<message>
<location filename="PathToolController.py" line="132"/>
<source>Tool Number to Load</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolController.py" line="156"/>
<source>Add Tool Controller to the Job</source>
@@ -4625,11 +4630,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Add Tool Controller</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolController.py" line="132"/>
<source>Tool Number to Load</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_ToolTable</name>
@@ -4656,6 +4656,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Creates a medial line engraving path</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="309"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
@@ -4666,11 +4671,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Engraver Cutting Edge Angle must be &lt; 180 degrees.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathVcarve.py" line="291"/>
<source>VCarve requires an engraving cutter with CuttingEdgeAngle</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Path_Waterline</name>
@@ -4705,11 +4705,56 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Save toolbit library</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
<source>Tooltable JSON (*.json)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
<source>HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
<source>LinuxCNC tooltable (*.tbl)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="512"/>
<source>Open tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Save tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Rename Tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Enter Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
<source>Add New Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
<source>Delete Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
<source>Rename Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="388"/>
<source>Tooltable editor</source>
@@ -4920,11 +4965,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Save tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="TooltableEditor.py" line="610"/>
<source>Tooltable XML (*.xml)</source>
@@ -4940,46 +4980,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
<source>Object doesn&apos;t have a tooltable property</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Rename Tooltable</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="354"/>
<source>Enter Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="385"/>
<source>Add New Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="387"/>
<source>Delete Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryEditor.py" line="389"/>
<source>Rename Selected Tool Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="147"/>
<source>Tooltable JSON (*.json)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="149"/>
<source>HeeksCAD tooltable (*.tooltable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../PathScripts/PathToolLibraryManager.py" line="150"/>
<source>LinuxCNC tooltable (*.tbl)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="PathToolLibraryManager.py" line="514"/>
<source>Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl)</source>

459
src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts
View File

@@ -186,30 +186,35 @@
<context>
<name>CmdSketcherCompConstrainRadDia</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5537"/>
<location filename="../../CommandConstraints.cpp" line="5900"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5538"/>
<location filename="../../CommandConstraints.cpp" line="5901"/>
<source>Constrain arc or circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5539"/>
<location filename="../../CommandConstraints.cpp" line="5902"/>
<source>Constrain an arc or a circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5631"/>
<location filename="../../CommandConstraints.cpp" line="6001"/>
<source>Constrain radius</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5635"/>
<location filename="../../CommandConstraints.cpp" line="6005"/>
<source>Constrain diameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6009"/>
<source>Constrain auto radius/diameter</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CmdSketcherCompCopy</name>
@@ -476,17 +481,17 @@
<context>
<name>CmdSketcherConstrainAngle</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5664"/>
<location filename="../../CommandConstraints.cpp" line="6038"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5665"/>
<location filename="../../CommandConstraints.cpp" line="6039"/>
<source>Constrain angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5666"/>
<location filename="../../CommandConstraints.cpp" line="6040"/>
<source>Fix the angle of a line or the angle between two lines</source>
<translation type="unfinished"></translation>
</message>
@@ -602,17 +607,17 @@
<context>
<name>CmdSketcherConstrainEqual</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6191"/>
<location filename="../../CommandConstraints.cpp" line="6565"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6192"/>
<location filename="../../CommandConstraints.cpp" line="6566"/>
<source>Constrain equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6193"/>
<location filename="../../CommandConstraints.cpp" line="6567"/>
<source>Create an equality constraint between two lines or between circles and arcs</source>
<translation type="unfinished"></translation>
</message>
@@ -638,17 +643,17 @@
<context>
<name>CmdSketcherConstrainInternalAlignment</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6872"/>
<location filename="../../CommandConstraints.cpp" line="7246"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6873"/>
<location filename="../../CommandConstraints.cpp" line="7247"/>
<source>Constrain internal alignment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6874"/>
<location filename="../../CommandConstraints.cpp" line="7248"/>
<source>Constrains an element to be aligned with the internal geometry of another element</source>
<translation type="unfinished"></translation>
</message>
@@ -726,6 +731,24 @@ on the selected vertex</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CmdSketcherConstrainRadiam</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5548"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5549"/>
<source>Constrain auto radius/diameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5550"/>
<source>Fix automatically diameter on circle and radius on arc/pole</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CmdSketcherConstrainRadius</name>
<message>
@@ -747,17 +770,17 @@ on the selected vertex</source>
<context>
<name>CmdSketcherConstrainSnellsLaw</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6708"/>
<location filename="../../CommandConstraints.cpp" line="7082"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6709"/>
<location filename="../../CommandConstraints.cpp" line="7083"/>
<source>Constrain refraction (Snell&apos;s law&apos;)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6710"/>
<location filename="../../CommandConstraints.cpp" line="7084"/>
<source>Create a refraction law (Snell&apos;s law) constraint between two endpoints of rays
and an edge as an interface.</source>
<translation type="unfinished"></translation>
@@ -766,17 +789,17 @@ and an edge as an interface.</source>
<context>
<name>CmdSketcherConstrainSymmetric</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6408"/>
<location filename="../../CommandConstraints.cpp" line="6782"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6409"/>
<location filename="../../CommandConstraints.cpp" line="6783"/>
<source>Constrain symmetrical</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6410"/>
<location filename="../../CommandConstraints.cpp" line="6784"/>
<source>Create a symmetry constraint between two points
with respect to a line or a third point</source>
<translation type="unfinished"></translation>
@@ -1933,17 +1956,17 @@ This will clear the &apos;Support&apos; property, if any.</source>
<context>
<name>CmdSketcherToggleActiveConstraint</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7459"/>
<location filename="../../CommandConstraints.cpp" line="7834"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7460"/>
<location filename="../../CommandConstraints.cpp" line="7835"/>
<source>Activate/deactivate constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7461"/>
<location filename="../../CommandConstraints.cpp" line="7836"/>
<source>Activates or deactivates the selected constraints</source>
<translation type="unfinished"></translation>
</message>
@@ -1969,17 +1992,17 @@ This will clear the &apos;Support&apos; property, if any.</source>
<context>
<name>CmdSketcherToggleDrivingConstraint</name>
<message>
<location filename="../../CommandConstraints.cpp" line="7333"/>
<location filename="../../CommandConstraints.cpp" line="7707"/>
<source>Sketcher</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7334"/>
<location filename="../../CommandConstraints.cpp" line="7708"/>
<source>Toggle driving/reference constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7335"/>
<location filename="../../CommandConstraints.cpp" line="7709"/>
<source>Set the toolbar, or the selected constraints,
into driving or reference mode</source>
<translation type="unfinished"></translation>
@@ -2269,48 +2292,56 @@ invalid constraints, degenerated geometry, etc.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5756"/>
<location filename="../../CommandConstraints.cpp" line="5889"/>
<location filename="../../CommandConstraints.cpp" line="5919"/>
<location filename="../../CommandConstraints.cpp" line="5943"/>
<location filename="../../CommandConstraints.cpp" line="6056"/>
<location filename="../../CommandConstraints.cpp" line="6110"/>
<location filename="../../CommandConstraints.cpp" line="5660"/>
<location filename="../../CommandConstraints.cpp" line="5715"/>
<location filename="../../CommandConstraints.cpp" line="5738"/>
<location filename="../../CommandConstraints.cpp" line="5831"/>
<source>Add radiam constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6130"/>
<location filename="../../CommandConstraints.cpp" line="6263"/>
<location filename="../../CommandConstraints.cpp" line="6293"/>
<location filename="../../CommandConstraints.cpp" line="6317"/>
<location filename="../../CommandConstraints.cpp" line="6430"/>
<location filename="../../CommandConstraints.cpp" line="6484"/>
<source>Add angle constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6324"/>
<location filename="../../CommandConstraints.cpp" line="6376"/>
<location filename="../../CommandConstraints.cpp" line="6698"/>
<location filename="../../CommandConstraints.cpp" line="6750"/>
<source>Add equality constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6497"/>
<location filename="../../CommandConstraints.cpp" line="6549"/>
<location filename="../../CommandConstraints.cpp" line="6565"/>
<location filename="../../CommandConstraints.cpp" line="6651"/>
<location filename="../../CommandConstraints.cpp" line="6686"/>
<location filename="../../CommandConstraints.cpp" line="6871"/>
<location filename="../../CommandConstraints.cpp" line="6923"/>
<location filename="../../CommandConstraints.cpp" line="6939"/>
<location filename="../../CommandConstraints.cpp" line="7025"/>
<location filename="../../CommandConstraints.cpp" line="7060"/>
<source>Add symmetric constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6825"/>
<location filename="../../CommandConstraints.cpp" line="7199"/>
<source>Add Snell&apos;s law constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7034"/>
<location filename="../../CommandConstraints.cpp" line="7212"/>
<location filename="../../CommandConstraints.cpp" line="7408"/>
<location filename="../../CommandConstraints.cpp" line="7586"/>
<source>Add internal alignment constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7418"/>
<location filename="../../CommandConstraints.cpp" line="7793"/>
<source>Toggle constraint to driving/reference</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7502"/>
<location filename="../../CommandConstraints.cpp" line="7877"/>
<source>Activate/Deactivate constraint</source>
<translation type="unfinished"></translation>
</message>
@@ -2787,49 +2818,54 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="5326"/>
<location filename="../../CommandConstraints.cpp" line="5464"/>
<location filename="../../CommandConstraints.cpp" line="5470"/>
<location filename="../../CommandConstraints.cpp" line="5706"/>
<location filename="../../CommandConstraints.cpp" line="5718"/>
<location filename="../../CommandConstraints.cpp" line="5749"/>
<location filename="../../CommandConstraints.cpp" line="5811"/>
<location filename="../../CommandConstraints.cpp" line="5907"/>
<location filename="../../CommandConstraints.cpp" line="5963"/>
<location filename="../../CommandConstraints.cpp" line="6103"/>
<location filename="../../CommandConstraints.cpp" line="6220"/>
<location filename="../../CommandConstraints.cpp" line="6233"/>
<location filename="../../CommandConstraints.cpp" line="6249"/>
<location filename="../../CommandConstraints.cpp" line="6254"/>
<location filename="../../CommandConstraints.cpp" line="6273"/>
<location filename="../../CommandConstraints.cpp" line="6303"/>
<location filename="../../CommandConstraints.cpp" line="6318"/>
<location filename="../../CommandConstraints.cpp" line="6370"/>
<location filename="../../CommandConstraints.cpp" line="6452"/>
<location filename="../../CommandConstraints.cpp" line="6465"/>
<location filename="../../CommandConstraints.cpp" line="6490"/>
<location filename="../../CommandConstraints.cpp" line="6512"/>
<location filename="../../CommandConstraints.cpp" line="6542"/>
<location filename="../../CommandConstraints.cpp" line="6579"/>
<location filename="../../CommandConstraints.cpp" line="6602"/>
<location filename="../../CommandConstraints.cpp" line="6644"/>
<location filename="../../CommandConstraints.cpp" line="6660"/>
<location filename="../../CommandConstraints.cpp" line="6787"/>
<location filename="../../CommandConstraints.cpp" line="6793"/>
<location filename="../../CommandConstraints.cpp" line="6892"/>
<location filename="../../CommandConstraints.cpp" line="6905"/>
<location filename="../../CommandConstraints.cpp" line="6926"/>
<location filename="../../CommandConstraints.cpp" line="6949"/>
<location filename="../../CommandConstraints.cpp" line="6971"/>
<location filename="../../CommandConstraints.cpp" line="6979"/>
<location filename="../../CommandConstraints.cpp" line="6985"/>
<location filename="../../CommandConstraints.cpp" line="7141"/>
<location filename="../../CommandConstraints.cpp" line="7149"/>
<location filename="../../CommandConstraints.cpp" line="7157"/>
<location filename="../../CommandConstraints.cpp" line="7163"/>
<location filename="../../CommandConstraints.cpp" line="7312"/>
<location filename="../../CommandConstraints.cpp" line="7372"/>
<location filename="../../CommandConstraints.cpp" line="7380"/>
<location filename="../../CommandConstraints.cpp" line="7412"/>
<location filename="../../CommandConstraints.cpp" line="7485"/>
<location filename="../../CommandConstraints.cpp" line="7496"/>
<location filename="../../CommandConstraints.cpp" line="5577"/>
<location filename="../../CommandConstraints.cpp" line="5588"/>
<location filename="../../CommandConstraints.cpp" line="5643"/>
<location filename="../../CommandConstraints.cpp" line="5649"/>
<location filename="../../CommandConstraints.cpp" line="5825"/>
<location filename="../../CommandConstraints.cpp" line="6080"/>
<location filename="../../CommandConstraints.cpp" line="6092"/>
<location filename="../../CommandConstraints.cpp" line="6123"/>
<location filename="../../CommandConstraints.cpp" line="6185"/>
<location filename="../../CommandConstraints.cpp" line="6281"/>
<location filename="../../CommandConstraints.cpp" line="6337"/>
<location filename="../../CommandConstraints.cpp" line="6477"/>
<location filename="../../CommandConstraints.cpp" line="6594"/>
<location filename="../../CommandConstraints.cpp" line="6607"/>
<location filename="../../CommandConstraints.cpp" line="6623"/>
<location filename="../../CommandConstraints.cpp" line="6628"/>
<location filename="../../CommandConstraints.cpp" line="6647"/>
<location filename="../../CommandConstraints.cpp" line="6677"/>
<location filename="../../CommandConstraints.cpp" line="6692"/>
<location filename="../../CommandConstraints.cpp" line="6744"/>
<location filename="../../CommandConstraints.cpp" line="6826"/>
<location filename="../../CommandConstraints.cpp" line="6839"/>
<location filename="../../CommandConstraints.cpp" line="6864"/>
<location filename="../../CommandConstraints.cpp" line="6886"/>
<location filename="../../CommandConstraints.cpp" line="6916"/>
<location filename="../../CommandConstraints.cpp" line="6953"/>
<location filename="../../CommandConstraints.cpp" line="6976"/>
<location filename="../../CommandConstraints.cpp" line="7018"/>
<location filename="../../CommandConstraints.cpp" line="7034"/>
<location filename="../../CommandConstraints.cpp" line="7161"/>
<location filename="../../CommandConstraints.cpp" line="7167"/>
<location filename="../../CommandConstraints.cpp" line="7266"/>
<location filename="../../CommandConstraints.cpp" line="7279"/>
<location filename="../../CommandConstraints.cpp" line="7300"/>
<location filename="../../CommandConstraints.cpp" line="7323"/>
<location filename="../../CommandConstraints.cpp" line="7345"/>
<location filename="../../CommandConstraints.cpp" line="7353"/>
<location filename="../../CommandConstraints.cpp" line="7359"/>
<location filename="../../CommandConstraints.cpp" line="7515"/>
<location filename="../../CommandConstraints.cpp" line="7523"/>
<location filename="../../CommandConstraints.cpp" line="7531"/>
<location filename="../../CommandConstraints.cpp" line="7537"/>
<location filename="../../CommandConstraints.cpp" line="7686"/>
<location filename="../../CommandConstraints.cpp" line="7747"/>
<location filename="../../CommandConstraints.cpp" line="7755"/>
<location filename="../../CommandConstraints.cpp" line="7787"/>
<location filename="../../CommandConstraints.cpp" line="7860"/>
<location filename="../../CommandConstraints.cpp" line="7871"/>
<location filename="../../CommandSketcherBSpline.cpp" line="431"/>
<location filename="../../CommandSketcherBSpline.cpp" line="502"/>
<location filename="../../CommandSketcherBSpline.cpp" line="580"/>
@@ -3028,7 +3064,7 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="4136"/>
<location filename="../../CommandConstraints.cpp" line="4349"/>
<location filename="../../CommandConstraints.cpp" line="4846"/>
<location filename="../../CommandConstraints.cpp" line="6855"/>
<location filename="../../CommandConstraints.cpp" line="7229"/>
<location filename="../../CommandSketcherBSpline.cpp" line="833"/>
<source>Error</source>
<translation type="unfinished"></translation>
@@ -3076,7 +3112,8 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="3172"/>
<location filename="../../CommandConstraints.cpp" line="4912"/>
<location filename="../../CommandConstraints.cpp" line="5259"/>
<location filename="../../CommandConstraints.cpp" line="5707"/>
<location filename="../../CommandConstraints.cpp" line="5578"/>
<location filename="../../CommandConstraints.cpp" line="6081"/>
<source>Select the right things from the sketch.</source>
<translation type="unfinished"></translation>
</message>
@@ -3111,10 +3148,10 @@ invalid constraints, degenerated geometry, etc.</source>
<location filename="../../CommandConstraints.cpp" line="4818"/>
<location filename="../../CommandConstraints.cpp" line="5312"/>
<location filename="../../CommandConstraints.cpp" line="5471"/>
<location filename="../../CommandConstraints.cpp" line="5750"/>
<location filename="../../CommandConstraints.cpp" line="5812"/>
<location filename="../../CommandConstraints.cpp" line="6104"/>
<location filename="../../CommandConstraints.cpp" line="6794"/>
<location filename="../../CommandConstraints.cpp" line="6124"/>
<location filename="../../CommandConstraints.cpp" line="6186"/>
<location filename="../../CommandConstraints.cpp" line="6478"/>
<location filename="../../CommandConstraints.cpp" line="7168"/>
<source>Select an edge that is not a B-spline weight</source>
<translation type="unfinished"></translation>
</message>
@@ -3164,7 +3201,7 @@ invalid constraints, degenerated geometry, etc.</source>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="3431"/>
<location filename="../../CommandConstraints.cpp" line="6234"/>
<location filename="../../CommandConstraints.cpp" line="6608"/>
<source>Select at least two lines from the sketch.</source>
<translation type="unfinished"></translation>
</message>
@@ -3289,204 +3326,208 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<location filename="../../CommandConstraints.cpp" line="4984"/>
<location filename="../../CommandConstraints.cpp" line="5270"/>
<location filename="../../CommandConstraints.cpp" line="5327"/>
<location filename="../../CommandConstraints.cpp" line="5589"/>
<location filename="../../CommandConstraints.cpp" line="5644"/>
<source>Select one or more arcs or circles from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="4990"/>
<location filename="../../CommandConstraints.cpp" line="5650"/>
<source>Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5142"/>
<location filename="../../CommandConstraints.cpp" line="5465"/>
<location filename="../../CommandConstraints.cpp" line="5826"/>
<source>Constraint only applies to arcs or circles.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5719"/>
<location filename="../../CommandConstraints.cpp" line="5964"/>
<location filename="../../CommandConstraints.cpp" line="6093"/>
<location filename="../../CommandConstraints.cpp" line="6338"/>
<source>Select one or two lines from the sketch. Or select two edges and a point.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5875"/>
<location filename="../../CommandConstraints.cpp" line="6042"/>
<location filename="../../CommandConstraints.cpp" line="6249"/>
<location filename="../../CommandConstraints.cpp" line="6416"/>
<source>Parallel lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5876"/>
<location filename="../../CommandConstraints.cpp" line="6043"/>
<location filename="../../CommandConstraints.cpp" line="6250"/>
<location filename="../../CommandConstraints.cpp" line="6417"/>
<source>An angle constraint cannot be set for two parallel lines.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="5908"/>
<location filename="../../CommandConstraints.cpp" line="6282"/>
<source>Cannot add an angle constraint on an axis!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6221"/>
<location filename="../../CommandConstraints.cpp" line="6595"/>
<source>Select two edges from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6250"/>
<location filename="../../CommandConstraints.cpp" line="6950"/>
<location filename="../../CommandConstraints.cpp" line="6624"/>
<location filename="../../CommandConstraints.cpp" line="7324"/>
<source>Select two or more compatible edges</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6255"/>
<location filename="../../CommandConstraints.cpp" line="6629"/>
<source>Sketch axes cannot be used in equality constraints</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6274"/>
<location filename="../../CommandConstraints.cpp" line="6648"/>
<source>Equality for B-spline edge currently unsupported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6304"/>
<location filename="../../CommandConstraints.cpp" line="6319"/>
<location filename="../../CommandConstraints.cpp" line="6371"/>
<location filename="../../CommandConstraints.cpp" line="6678"/>
<location filename="../../CommandConstraints.cpp" line="6693"/>
<location filename="../../CommandConstraints.cpp" line="6745"/>
<source>Select two or more edges of similar type</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6453"/>
<location filename="../../CommandConstraints.cpp" line="6466"/>
<location filename="../../CommandConstraints.cpp" line="6513"/>
<location filename="../../CommandConstraints.cpp" line="6580"/>
<location filename="../../CommandConstraints.cpp" line="6661"/>
<location filename="../../CommandConstraints.cpp" line="6827"/>
<location filename="../../CommandConstraints.cpp" line="6840"/>
<location filename="../../CommandConstraints.cpp" line="6887"/>
<location filename="../../CommandConstraints.cpp" line="6954"/>
<location filename="../../CommandConstraints.cpp" line="7035"/>
<source>Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6491"/>
<location filename="../../CommandConstraints.cpp" line="6645"/>
<location filename="../../CommandConstraints.cpp" line="6865"/>
<location filename="../../CommandConstraints.cpp" line="7019"/>
<source>Cannot add a symmetry constraint between a line and its end points.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6543"/>
<location filename="../../CommandConstraints.cpp" line="6603"/>
<location filename="../../CommandConstraints.cpp" line="6917"/>
<location filename="../../CommandConstraints.cpp" line="6977"/>
<source>Cannot add a symmetry constraint between a line and its end points!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6723"/>
<location filename="../../CommandConstraints.cpp" line="7097"/>
<source>Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1.</source>
<comment>Constraint_SnellsLaw</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6771"/>
<location filename="../../CommandConstraints.cpp" line="7145"/>
<source>Cannot create constraint with external geometry only.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6778"/>
<location filename="../../CommandConstraints.cpp" line="7152"/>
<source>Incompatible geometry is selected.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6788"/>
<location filename="../../CommandConstraints.cpp" line="7162"/>
<source>SnellsLaw on B-spline edge is currently unsupported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6972"/>
<location filename="../../CommandConstraints.cpp" line="7346"/>
<source>You cannot internally constrain an ellipse on another ellipse. Select only one ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7025"/>
<location filename="../../CommandConstraints.cpp" line="7203"/>
<location filename="../../CommandConstraints.cpp" line="7399"/>
<location filename="../../CommandConstraints.cpp" line="7577"/>
<source>Currently all internal geometrical elements of the ellipse are already exposed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7373"/>
<location filename="../../CommandConstraints.cpp" line="7381"/>
<location filename="../../CommandConstraints.cpp" line="7413"/>
<location filename="../../CommandConstraints.cpp" line="7486"/>
<location filename="../../CommandConstraints.cpp" line="7497"/>
<location filename="../../CommandConstraints.cpp" line="7748"/>
<location filename="../../CommandConstraints.cpp" line="7756"/>
<location filename="../../CommandConstraints.cpp" line="7788"/>
<location filename="../../CommandConstraints.cpp" line="7861"/>
<location filename="../../CommandConstraints.cpp" line="7872"/>
<source>Select constraints from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6739"/>
<location filename="../../CommandConstraints.cpp" line="7113"/>
<source>Selected objects are not just geometry from one sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6749"/>
<location filename="../../CommandConstraints.cpp" line="7123"/>
<source>Number of selected objects is not 3 (is %1).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6893"/>
<location filename="../../CommandConstraints.cpp" line="6906"/>
<location filename="../../CommandConstraints.cpp" line="7267"/>
<location filename="../../CommandConstraints.cpp" line="7280"/>
<source>Select at least one ellipse and one edge from the sketch.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6927"/>
<location filename="../../CommandConstraints.cpp" line="7301"/>
<source>Sketch axes cannot be used in internal alignment constraint</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6980"/>
<location filename="../../CommandConstraints.cpp" line="7158"/>
<location filename="../../CommandConstraints.cpp" line="7354"/>
<location filename="../../CommandConstraints.cpp" line="7532"/>
<source>Maximum 2 points are supported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6986"/>
<location filename="../../CommandConstraints.cpp" line="7164"/>
<location filename="../../CommandConstraints.cpp" line="7360"/>
<location filename="../../CommandConstraints.cpp" line="7538"/>
<source>Maximum 2 lines are supported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7024"/>
<location filename="../../CommandConstraints.cpp" line="7202"/>
<location filename="../../CommandConstraints.cpp" line="7398"/>
<location filename="../../CommandConstraints.cpp" line="7576"/>
<source>Nothing to constrain</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7115"/>
<location filename="../../CommandConstraints.cpp" line="7126"/>
<location filename="../../CommandConstraints.cpp" line="7293"/>
<location filename="../../CommandConstraints.cpp" line="7304"/>
<location filename="../../CommandConstraints.cpp" line="7489"/>
<location filename="../../CommandConstraints.cpp" line="7500"/>
<location filename="../../CommandConstraints.cpp" line="7667"/>
<location filename="../../CommandConstraints.cpp" line="7678"/>
<source>Extra elements</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7116"/>
<location filename="../../CommandConstraints.cpp" line="7127"/>
<location filename="../../CommandConstraints.cpp" line="7294"/>
<location filename="../../CommandConstraints.cpp" line="7490"/>
<location filename="../../CommandConstraints.cpp" line="7501"/>
<location filename="../../CommandConstraints.cpp" line="7668"/>
<source>More elements than possible for the given ellipse were provided. These were ignored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7142"/>
<location filename="../../CommandConstraints.cpp" line="7516"/>
<source>You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7150"/>
<location filename="../../CommandConstraints.cpp" line="7524"/>
<source>You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7305"/>
<location filename="../../CommandConstraints.cpp" line="7679"/>
<source>More elements than possible for the given arc of ellipse were provided. These were ignored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="7313"/>
<location filename="../../CommandConstraints.cpp" line="7687"/>
<source>Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse.</source>
<translation type="unfinished"></translation>
</message>
@@ -3802,12 +3843,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6805"/>
<location filename="../../CommandConstraints.cpp" line="7179"/>
<source>Refractive index ratio</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../CommandConstraints.cpp" line="6806"/>
<location filename="../../CommandConstraints.cpp" line="7180"/>
<source>Ratio n2/n1:</source>
<translation type="unfinished"></translation>
</message>
@@ -3815,7 +3856,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
<context>
<name>SketcherGui::ElementView</name>
<message>
<location filename="../../TaskSketcherElements.cpp" line="184"/>
<location filename="../../TaskSketcherElements.cpp" line="185"/>
<source>Delete</source>
<translation type="unfinished"></translation>
</message>
@@ -4819,106 +4860,106 @@ However, no constraints linking to the endpoints were found.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="257"/>
<location filename="../../TaskSketcherElements.cpp" line="259"/>
<source>Elements</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="278"/>
<location filename="../../TaskSketcherElements.cpp" line="280"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&amp;quot;%1&amp;quot;: multiple selection&lt;/p&gt;&lt;p&gt;&amp;quot;%2&amp;quot;: switch to next valid type&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="747"/>
<location filename="../../TaskSketcherElements.cpp" line="748"/>
<location filename="../../TaskSketcherElements.cpp" line="853"/>
<location filename="../../TaskSketcherElements.cpp" line="854"/>
<location filename="../../TaskSketcherElements.cpp" line="749"/>
<location filename="../../TaskSketcherElements.cpp" line="750"/>
<location filename="../../TaskSketcherElements.cpp" line="855"/>
<location filename="../../TaskSketcherElements.cpp" line="856"/>
<source>Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="750"/>
<location filename="../../TaskSketcherElements.cpp" line="752"/>
<location filename="../../TaskSketcherElements.cpp" line="856"/>
<location filename="../../TaskSketcherElements.cpp" line="857"/>
<location filename="../../TaskSketcherElements.cpp" line="754"/>
<location filename="../../TaskSketcherElements.cpp" line="858"/>
<location filename="../../TaskSketcherElements.cpp" line="859"/>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.ui" line="99"/>
<location filename="../../TaskSketcherElements.cpp" line="751"/>
<location filename="../../TaskSketcherElements.cpp" line="755"/>
<location filename="../../TaskSketcherElements.cpp" line="759"/>
<location filename="../../TaskSketcherElements.cpp" line="763"/>
<location filename="../../TaskSketcherElements.cpp" line="767"/>
<location filename="../../TaskSketcherElements.cpp" line="771"/>
<location filename="../../TaskSketcherElements.cpp" line="775"/>
<location filename="../../TaskSketcherElements.cpp" line="779"/>
<location filename="../../TaskSketcherElements.cpp" line="783"/>
<location filename="../../TaskSketcherElements.cpp" line="753"/>
<location filename="../../TaskSketcherElements.cpp" line="757"/>
<location filename="../../TaskSketcherElements.cpp" line="761"/>
<location filename="../../TaskSketcherElements.cpp" line="765"/>
<location filename="../../TaskSketcherElements.cpp" line="769"/>
<location filename="../../TaskSketcherElements.cpp" line="773"/>
<location filename="../../TaskSketcherElements.cpp" line="777"/>
<location filename="../../TaskSketcherElements.cpp" line="781"/>
<location filename="../../TaskSketcherElements.cpp" line="785"/>
<source>Construction</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="754"/>
<location filename="../../TaskSketcherElements.cpp" line="756"/>
<location filename="../../TaskSketcherElements.cpp" line="859"/>
<location filename="../../TaskSketcherElements.cpp" line="860"/>
<location filename="../../TaskSketcherElements.cpp" line="758"/>
<location filename="../../TaskSketcherElements.cpp" line="861"/>
<location filename="../../TaskSketcherElements.cpp" line="862"/>
<source>Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="758"/>
<location filename="../../TaskSketcherElements.cpp" line="760"/>
<location filename="../../TaskSketcherElements.cpp" line="862"/>
<location filename="../../TaskSketcherElements.cpp" line="863"/>
<location filename="../../TaskSketcherElements.cpp" line="762"/>
<location filename="../../TaskSketcherElements.cpp" line="864"/>
<location filename="../../TaskSketcherElements.cpp" line="865"/>
<source>Circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="762"/>
<location filename="../../TaskSketcherElements.cpp" line="764"/>
<location filename="../../TaskSketcherElements.cpp" line="865"/>
<location filename="../../TaskSketcherElements.cpp" line="866"/>
<location filename="../../TaskSketcherElements.cpp" line="766"/>
<location filename="../../TaskSketcherElements.cpp" line="867"/>
<location filename="../../TaskSketcherElements.cpp" line="868"/>
<source>Ellipse</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="766"/>
<location filename="../../TaskSketcherElements.cpp" line="768"/>
<location filename="../../TaskSketcherElements.cpp" line="868"/>
<location filename="../../TaskSketcherElements.cpp" line="869"/>
<location filename="../../TaskSketcherElements.cpp" line="770"/>
<location filename="../../TaskSketcherElements.cpp" line="870"/>
<location filename="../../TaskSketcherElements.cpp" line="871"/>
<source>Elliptical Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="770"/>
<location filename="../../TaskSketcherElements.cpp" line="772"/>
<location filename="../../TaskSketcherElements.cpp" line="871"/>
<location filename="../../TaskSketcherElements.cpp" line="872"/>
<location filename="../../TaskSketcherElements.cpp" line="774"/>
<location filename="../../TaskSketcherElements.cpp" line="873"/>
<location filename="../../TaskSketcherElements.cpp" line="874"/>
<source>Hyperbolic Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="774"/>
<location filename="../../TaskSketcherElements.cpp" line="776"/>
<location filename="../../TaskSketcherElements.cpp" line="874"/>
<location filename="../../TaskSketcherElements.cpp" line="875"/>
<location filename="../../TaskSketcherElements.cpp" line="778"/>
<location filename="../../TaskSketcherElements.cpp" line="876"/>
<location filename="../../TaskSketcherElements.cpp" line="877"/>
<source>Parabolic Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="778"/>
<location filename="../../TaskSketcherElements.cpp" line="780"/>
<location filename="../../TaskSketcherElements.cpp" line="877"/>
<location filename="../../TaskSketcherElements.cpp" line="878"/>
<location filename="../../TaskSketcherElements.cpp" line="782"/>
<location filename="../../TaskSketcherElements.cpp" line="879"/>
<location filename="../../TaskSketcherElements.cpp" line="880"/>
<source>BSpline</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskSketcherElements.cpp" line="782"/>
<location filename="../../TaskSketcherElements.cpp" line="784"/>
<location filename="../../TaskSketcherElements.cpp" line="880"/>
<location filename="../../TaskSketcherElements.cpp" line="881"/>
<location filename="../../TaskSketcherElements.cpp" line="786"/>
<location filename="../../TaskSketcherElements.cpp" line="882"/>
<location filename="../../TaskSketcherElements.cpp" line="883"/>
<source>Other</source>
<translation type="unfinished"></translation>
</message>
@@ -5326,21 +5367,37 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
<context>
<name>Sketcher_ConstrainDiameter</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5636"/>
<location filename="../../CommandConstraints.cpp" line="5637"/>
<location filename="../../CommandConstraints.cpp" line="6006"/>
<location filename="../../CommandConstraints.cpp" line="6007"/>
<source>Fix the diameter of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Sketcher_ConstrainRadiam</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6011"/>
<source>Fix the radius/diameter of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Sketcher_ConstrainRadius</name>
<message>
<location filename="../../CommandConstraints.cpp" line="5632"/>
<location filename="../../CommandConstraints.cpp" line="5633"/>
<location filename="../../CommandConstraints.cpp" line="6002"/>
<location filename="../../CommandConstraints.cpp" line="6003"/>
<source>Fix the radius of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Sketcher_ConstraintRadiam</name>
<message>
<location filename="../../CommandConstraints.cpp" line="6010"/>
<source>Fix the radius/diameter of a circle or an arc</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Sketcher_Copy</name>
<message>

6
src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts
View File

@@ -901,7 +901,7 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskCenterLine.cpp" line="331"/>
<location filename="../../TaskCenterLine.cpp" line="327"/>
<source>Create CenterLine</source>
<translation type="unfinished"></translation>
</message>
@@ -1816,12 +1816,12 @@
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskCenterLine.cpp" line="200"/>
<location filename="../../TaskCenterLine.cpp" line="196"/>
<source>Create Center Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../TaskCenterLine.cpp" line="230"/>
<location filename="../../TaskCenterLine.cpp" line="226"/>
<source>Edit Center Line</source>
<translation type="unfinished"></translation>
</message>