Found via `codespell -q 3 -L aci,ake,aline,alle,alledges,alocation,als,ang,anid,apoints,ba,beginn,behaviour,bloaded,bottome,byteorder,calculater,cancelled,cancelling,cas,cascade,centimetre,childs,colour,colours,commen,connexion,currenty,dof,doubleclick,dum,eiter,elemente,ende,feld,finde,findf,freez,hist,iff,indicies,initialisation,initialise,initialised,initialises,initialisiert,inout,ist,kilometre,lod,mantatory,methode,metres,millimetre,modell,nd,noe,normale,normaly,nto,numer,oder,ontop,orgin,orginx,orginy,ot,pard,parms,pres,programm,que,recurrance,rougly,seperator,serie,sinc,strack,substraction,te,thist,thru,tread,uint,unter,vertexes,wallthickness,whitespaces -S ./.git,*.po,*.ts,./ChangeLog.txt,./src/3rdParty,./src/Mod/Assembly/App/opendcm,./src/CXX,./src/zipios++,./src/Base/swig*,./src/Mod/Robot/App/kdl_cp,./src/Mod/Import/App/SCL,./src/WindowsInstaller,./src/Doc/FreeCAD.uml,./build/doc/SourceDocu`
- to avoid invalid results:
- don't allow to set equal radii for cones
- don't allow to set equal wedge parameters
- don't allow zero quantities like e.g. the box width
- use full internal precision because it must be possible to create an e.g. 23.5 um wide box and using the default 2 displayed digits
- take spinbox limits from App
- add missing tooltips
- remove disturbing commented out line from Workbench.cpp
- some coding style issues fixed automatically by the MSVC IDE
We already have the possibility to create skewed prisms. I recently stumbled upon that I would need this feature for cylinders too.
This PR takes the existing prism extrude direction feature and use it for cylinders too
* pass boolean instead of int to setValue of PropertyBool
* support of symmetric option for two-length mode
* fix bug in TaskPadParameters::updateUI()
* remove strange acronyms from method names
- as discussed here: https://forum.freecadweb.org/viewtopic.php?f=17&t=50466&start=10#p433327
this PR is the first step for new Pad features.
It implements 3 features requested by users:
1. an option to measure the pad length along its direction if there is a custom direction
2. when there are two lengths, the reverse feature should be active
3. the pad dialog shows now always the used pad direction, no matter if it is a custom one or the sketch's normal
- Furthermore there are some code improvements (avoid rounding and blocking signals)
- Also adapt TestPad.py because its test used the case two lengths + reversed but this was not possible before this PR - the reverse option was not take into account for two lengths in FeatureSketchBased.cpp)
Now it is and therefore the test must be updated:
In the test the second sketch has the normal vector 0, -1, 0. As the reverse option is set the pad direction is 0, 1, 0. So in y direction is the length (1mm) and in -y direction is length2 (2mm). This gives together with the other pad of volume 1, a total volume of 4.
- fix UI issue: either reversed or midplane
As noticed by @chennes, when the pad uses symmetric, reversed is not sensible and vice versa.
This commit fixes the missing Gui side for the case midplane is checked and the App side.
- the PR also fix two typos
- Use fuzzy fuse/cut method with tolerance Precision::Confusion()
- Use parallel computation feature
- Allow that individual patterned item fail to intersect the baseobject.
Issue warning instead of error. This was done for performance reasons
but it can also be considered a feature.
- Simplify the code a bit
- Distinguish between overlapping mode and non-overlapping mode. In non-overlapping mode
the tool shapes are compounded instead of fused. For huge benefit in performance.
- Thread runout according to DIN 76-1
- Through all length updated to be calculated based on bounding box
- New properties: ModelThread, ThreadDepthType, ThreadDepth,
UseCustomThreadClearance, CustomThreadClearance
- Rename Old but unused parameters related to thread modeling.
- Functionality exposed in UI
Previously Subtractive loft would create a shape if there is no base
object. This is because the code is shared with Additive Loft, where
that is the right thing to do. Now we check for this, and return error
if there is nothing to subtract from.
Before the throughall distance was 10 m, which is not enough for
many applications. The fix is to use the bounding box of the base shape
together with the sketch profile to calculate dynamically a large enough
length.
