* [Core] Add Boolean Functions to expressions (AND, OR, BOOL, NOT)
* [Core] Add `if` function to expressions to overcome ternary operator limitations
* [Core] Update expressions grammar to recognize relational operations as arguments
* [Core] The `if` function has been removed as no consensus was reached regarding its convenience or necessity. Its inclusion was considered potentially confusing or redundant.
* [Core] Make boolean cast based on Confusion threshold.
* Fix various typos
Found via codespell
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
If snapping was off, and after clicking the first point of a new line (for example), the cursor would be a default arrow instead of the intended cross-shaped cursor.
Note that the arrow cursor is still displayed for a fraction of a second after this fix.
May also fix#16559.
* CAM: revert grbl_post regression
I recently noticed a bug in grbl_proc post processor where it was not correctly setting OLD_Z if current machine_z is below G81 retract plane in R parmeter.
On digging into my original commit is looks like the two lines which did this have been commented out.
I can never find the Blame feature when I need so if someone else can find the culprit feel free.
2bd617a2b3
This PR simply reinstates the missing lines and adds a snippet of NIST as a comment block to prevent any over-zealous editing in the future.
This regression means that drilling cycles start with z=clearance height instead of z=safe height leading to much costly air cutting.
This similarly messes up the the retract plane for G98 leading to excessive machine time wasting and incorrect application of G98 returns.
Indeed this regression was noticed because some were claiming the Safe height was redundant in drilling ops since it was never used.
There is much discussion about all this at the moment which is being disrupted by people assuming the current broken paths are what FreeCAD is intended to do.
Let's fix this ASAP, so we can stop this confusion and get discussions back to reality.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Initial commit of FEM bindings.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* running black.
* Fixing imports.
* Update src/Mod/Fem/Gui/ViewProviderFemMeshPy.pyi
Co-authored-by: João Matos <joao@tritao.eu>
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: João Matos <joao@tritao.eu>
* Sketcher: Make distance constraint more interactable
As the title says, this patch aligns selectability to what we actually
draw, so from now on extension lines and arrowheads will be also
selectable.
* Sketcher: Make radius/diameter constraint more interactable
* Sketcher: Make angle constraint more interactable
* Sketcher: Make symmetric constraint more interactable
* Sketcher: Make ArcLength constraint more interactable
Fixes issue 19183 also reported in the forum:
https://forum.freecad.org/viewtopic.php?p=806495https://forum.freecad.org/viewtopic.php?t=88234
The actual reason for the failure is that the new code uses
FaceMakerBullseye method which expects coplanar wires.
The code was using FaceMakerCheese previously which changed
in LinkStage with their commit 93ce3edfe7ff
("PD: use FaceMakerBullseye for feature Loft")
and was imported here with TNP mitigations.
As changing it back would cause different regressions, lets
try different facemakers until one succeeds.
Fixes: 301194a69682 ("Toponaming/Part: Fix all getBaseTopoShape calls...")
Co-authored-by: Benjamin Nauck <benjamin@nauck.se>
Co-authored-by: Werner Mayer <wmayer@freecad.org>
* Ensure the ::Remove flag of DocumentObject is set to true before calls to breakLinks
* TechDraw: remove then add balloon annotation when changing the SourceView
* Revert "TechDraw: remove then add balloon annotation when changing the SourceView"
This reverts commit 483b4fe4a0715ff63c2669af33fc3beb60a93f54.
* Part: Enable SwitchToTask as a preference
As the title says. No clue why this variable was not available in
preferences, but giving it to users allow them to stop Part Design
workbench to switch to Tasks tab by default, everytime they switch
workbench, which users claim to be annoying.
So this patch adds this preference under Part/Part Design.
* Update src/Mod/Part/Gui/DlgSettingsGeneral.ui
Co-authored-by: Max Wilfinger <6246609+maxwxyz@users.noreply.github.com>
* Update src/Mod/Part/Gui/DlgSettingsGeneral.ui
Co-authored-by: Max Wilfinger <6246609+maxwxyz@users.noreply.github.com>
---------
Co-authored-by: Kacper Donat <kadet1090@gmail.com>
Co-authored-by: Max Wilfinger <6246609+maxwxyz@users.noreply.github.com>
* [Spreadsheet] Add icons to the context menu
This commit adds the following icons:
- edit-cut
- edit-copy
- edit-paste
- edit-delete
- merge-cells
- split-cell
- view-refresh
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
